LIEBERT-GP-SYSTEM-MIB
Vertiv (formerly 'Emerson Computer Power')The MIB module used to specify Liebert Controller OIDs Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m LIEBERT-GP-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m LIEBERT-GP-SYSTEM-MIB <host> 1.3.6.1.4.1.476.1.42.1.8.1Imports
| LIEBERT-GP-AGENT-MIB | lgpAgentConnectedDeviceCount, lgpAgentDeviceIndex |
|---|---|
| LIEBERT-GP-REGISTRATION-MIB | lgpSystem, liebertSystemModuleReg |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-MIB | sysUpTime |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IliebertSystemModule | 1.3.6.1.4.1.476.1.42.1.8.1 | ||||||||||||
identity The MIB module used to specify Liebert Controller OIDs Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | |||||||||||||
| NlgpSysStatistics | 1.3.6.1.4.1.476.1.42.3.7.1 | ||||||||||||
node · current This sub-tree is used to register Liebert System Statistics object identifiers. | |||||||||||||
| SlgpSysStatisticsRunHrs | 1.3.6.1.4.1.476.1.42.3.7.1.1 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of the system.
| |||||||||||||
| NlgpSysStatus | 1.3.6.1.4.1.476.1.42.3.7.2 | ||||||||||||
node · current This sub-tree is used to register Liebert System Status object identifiers. | |||||||||||||
| SlgpSysSelfTestResult | 1.3.6.1.4.1.476.1.42.3.7.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The outcome of the previous self-test.
| |||||||||||||
| SlgpSysState | 1.3.6.1.4.1.476.1.42.3.7.2.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The operating status for the system. The intent of this data
is to provide a high level status of the system.
The possible states are:
normalOperation(1)
The system is operating normally with no active warnings or
alarms.
startUp(2)
The system is in a startup state (initializing). Monitoring
operations and information may not be fully supported at this
time. This state will clear automatically when the system is
fully initialized and ready to accept monitoring commands.
normalWithWarning(3)
The system is operating normally with one or more active
warnings. Appropriate personnel should investigate the
warning(s) as soon as possible and take appropriate action.
normalWithAlarm(4)
The system is operating normally with one or more active
alarms. Appropriate personnel should investigate the alarm(s)
as soon as possible and take appropriate action.
abnormalOperation(5)
They system is operating abnormally. There is a
failure within the system that is unexpected under normal
operating conditions. Appropriate personnel should investigate
the cause as soon as possible. The normal functioning of
the system is likely inhibited.
| |||||||||||||
| NlgpSysSettings | 1.3.6.1.4.1.476.1.42.3.7.3 | ||||||||||||
node · current This sub-tree is used to register Liebert System Settings object identifiers. | |||||||||||||
| SlgpSysAudibleAlarm | 1.3.6.1.4.1.476.1.42.3.7.3.1 | INTEGER | RW | on(1) | |||||||||
scalar · INTEGER · read-write · current The state of the audible alarm of the device.
Example values from LibreNMS test devices
| |||||||||||||
| NlgpSysControl | 1.3.6.1.4.1.476.1.42.3.7.4 | ||||||||||||
node · current This sub-tree is used to register Liebert System Control object identifiers. | |||||||||||||
| SlgpSysSelfTest | 1.3.6.1.4.1.476.1.42.3.7.4.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Self-Test Command. This command will initiate a system self-test of the system. If already initiated, this command will abort the self-test. This command should be sent with a parameter of 1. This variable doesn't return a value when read. | |||||||||||||
| SlgpSysControlOperationOnOff | 1.3.6.1.4.1.476.1.42.3.7.4.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object allows control of the system functionality. This will not affect the communications or control of the system, so that once turned off, the system operation can be restored by setting this value to 'on'.
| |||||||||||||
| NlgpSysTime | 1.3.6.1.4.1.476.1.42.3.7.5 | ||||||||||||
node · current This sub-tree is used to register Liebert System Time object identifiers. | |||||||||||||
| SlgpSysTimeEpoch | 1.3.6.1.4.1.476.1.42.3.7.5.1 | Unsigned32 | RW | 1789059100 | |||||||||
scalar · Unsigned32 · read-write · current The present time of the system. This time is represented as the number of seconds since the epoch of 1970-01-01 00:00:00 GMT.
Example values from LibreNMS test devices
| |||||||||||||
| NlgpSysMaintenance | 1.3.6.1.4.1.476.1.42.3.7.6 | ||||||||||||
node · current This sub-tree is used to register Liebert System Maintenance object identifiers. | |||||||||||||
| SlgpSysMaintenanceCapacity | 1.3.6.1.4.1.476.1.42.3.7.6.1 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The relative percentage of time that has elapsed since the last scheduled maintenance was performed. When this value reaches 100%, the device is due for another scheduled maintenance procedure.
| |||||||||||||
| SlgpSysMaintenanceYear | 1.3.6.1.4.1.476.1.42.3.7.6.2 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The year in which the next scheduled service is due
| |||||||||||||
| SlgpSysMaintenanceMonth | 1.3.6.1.4.1.476.1.42.3.7.6.3 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The month in which the next scheduled service is due
| |||||||||||||
| SlgpSysEventDescription | 1.3.6.1.4.1.476.1.42.3.7.7 | DisplayString (SIZE (255)) | RO | ||||||||||
scalar · DisplayString (SIZE (255)) · read-only · current An ASCII textual description for the event. This object is primarily used in the varbind of some notifications to provide a simple human-readable description. | |||||||||||||
| NlgpSysEventNotifications | 1.3.6.1.4.1.476.1.42.3.7.8 | ||||||||||||
node · current This sub-tree is used to register Liebert System Notification object identifiers. | |||||||||||||
| !lgpSysNotification | 1.3.6.1.4.1.476.1.42.3.7.8.1 | ||||||||||||
notification · current This notification is a generic notification intended for direct user visibility. The user event description identifies the system condition that has occurred. This text will be prefixed with either 'Active:', 'Cleared:', or 'Message:' depending on the state of the event. Note: That a prefix of 'Message:' identifies a stateless event and as such there will be no corresponding 'Cleared:' trap sent.
| |||||||||||||
| !lgpSysNormal | 1.3.6.1.4.1.476.1.42.3.7.8.2 | ||||||||||||
notification · current The system has returned to a normal operating state. This implies prior to the generation of this event the system was operating in a state where one or more alarm or warning conditions were present. All of those alarms or conditions have now cleared. NOTE: This notification may be generated after a short delay during a cold boot of the system -- if no alarms or conditions are present in the monitored device(s) at that time. | |||||||||||||
| NlgpSysDeviceComponentGroup | 1.3.6.1.4.1.476.1.42.3.7.9 | ||||||||||||
node · current This sub-tree registers well known device components. | |||||||||||||
| TlgpSysDeviceComponentTable | 1.3.6.1.4.1.476.1.42.3.7.9.1 | NA | |||||||||||
table · not-accessible · current A list of components of devices identified by their serial number and or model number. This table contains zero, one, or many rows. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. | |||||||||||||
| RlgpSysDeviceComponentEntry | 1.3.6.1.4.1.476.1.42.3.7.9.1.1 | NA | |||||||||||
row · not-accessible · current This entry defines the contents of the columns for the table 'lgpSysDeviceComponentTable'. | |||||||||||||
| ClgpSysDeviceComponentIndex | 1.3.6.1.4.1.476.1.42.3.7.9.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This is the index indicating the row in the table 'lgpSysDeviceComponentTable' for a component entry. | |||||||||||||
| ClgpSysDeviceComponentDescr | 1.3.6.1.4.1.476.1.42.3.7.9.1.1.2 | OBJECT IDENTIFIER | RO | ||||||||||
column · OBJECT IDENTIFIER · read-only · current An OID representing a component of the device indicated by the index lgpAgentDeviceIndex. | |||||||||||||
| ClgpSysDeviceComponentSerialNum | 1.3.6.1.4.1.476.1.42.3.7.9.1.1.3 | DisplayString (SIZE (255)) | RO | ||||||||||
column · DisplayString (SIZE (255)) · read-only · current This is the serial number of the component described by the OID 'lgpSysDeviceComponentDescr'. This data is intended for display / human consumption. Do not use this field for determining programmatic behavior. | |||||||||||||
| ClgpSysDeviceComponentModelNum | 1.3.6.1.4.1.476.1.42.3.7.9.1.1.4 | DisplayString (SIZE (255)) | RO | ||||||||||
column · DisplayString (SIZE (255)) · read-only · current This is the model identifier of the component described by the OID 'lgpSysDeviceComponentDescr'. This data is intended for display / human consumption. Do not use this field for determining programmatic behavior. | |||||||||||||
| NlgpSysDeviceComponentWellknown | 1.3.6.1.4.1.476.1.42.3.7.9.5 | ||||||||||||
node · current This sub-tree registers well known Liebert System Components. | |||||||||||||
| NlgpSysDeviceBatCabinet | 1.3.6.1.4.1.476.1.42.3.7.9.5.5 | ||||||||||||
node · current This sub-tree is used to register a battery cabinet component.
To determine the cabinet being described in a
multi-cabinet system, this point implements an additional
two indexes. The first index describes the module the cabinet
is located in. The second index describes the cabinet
number. In an SMS (Single-Module System) the first index is
always 1.
Example: lgpSysDeviceComponentCabinet.2.4
'lgpSysDeviceCabinet' = Point is a battery cabinet.
'.2' = Cabinet is in the second module.
'.4' = Cabinet number 4 in second module | |||||||||||||
| NlgpSysDeviceParallelCabinet | 1.3.6.1.4.1.476.1.42.3.7.9.5.6 | ||||||||||||
node · current This sub-tree is used to register a parallel cabinet. | |||||||||||||
| NlgpSysDeviceMaintBypass | 1.3.6.1.4.1.476.1.42.3.7.9.5.7 | ||||||||||||
node · current This sub-tree is used to register the maintenance bypass. | |||||||||||||
Traps / Notifications
- lgpSysNormal
1.3.6.1.4.1.476.1.42.3.7.8.2 - lgpSysNotification
1.3.6.1.4.1.476.1.42.3.7.8.1