LIEBERT-GP-ENVIRONMENTAL-MIB
Vertiv (formerly 'Emerson Computer Power')The MIB module used to register Liebert SNMP OIDs. Copyright 2000-2015 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m LIEBERT-GP-ENVIRONMENTAL-MIB -Tpsnmpwalk -v2c -c <community> -m LIEBERT-GP-ENVIRONMENTAL-MIB <host> 1.3.6.1.4.1.476.1.42.1.5.1Imports
| LIEBERT-GP-REGISTRATION-MIB | lgpEnvironmental, liebertEnvironmentalModuleReg |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IliebertGlobalProductsEnvironmentalModule | 1.3.6.1.4.1.476.1.42.1.5.1 | ||||||||||||||||||||
identity The MIB module used to register Liebert SNMP OIDs. Copyright 2000-2015 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | |||||||||||||||||||||
| NlgpEnvTemperature | 1.3.6.1.4.1.476.1.42.3.4.1 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert temperature object identifiers. | |||||||||||||||||||||
| NlgpEnvTemperatureWellKnown | 1.3.6.1.4.1.476.1.42.3.4.1.1 | ||||||||||||||||||||
node · current Liebert well known temperature objects are identified by OIDs that reside in this sub-tree. | |||||||||||||||||||||
| NlgpEnvControlTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.1 | ||||||||||||||||||||
node · current Temperature measurement used as control feedback. | |||||||||||||||||||||
| NlgpEnvReturnAirTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.2 | ||||||||||||||||||||
node · current Temperature measurement of return air. | |||||||||||||||||||||
| NlgpEnvSupplyAirTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.3 | ||||||||||||||||||||
node · current Temperature measurement of supply air. | |||||||||||||||||||||
| NlgpAmbientTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.4 | ||||||||||||||||||||
node · current Ambient temperature measurement. | |||||||||||||||||||||
| NlgpInverterTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.5 | ||||||||||||||||||||
node · current Temperature measurement of the inverter. | |||||||||||||||||||||
| NlgpBatteryTempterature | 1.3.6.1.4.1.476.1.42.3.4.1.1.6 | ||||||||||||||||||||
node · current Temperature measurement of the battery. | |||||||||||||||||||||
| NlgpAcDcConverterTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.7 | ||||||||||||||||||||
node · current Temperature measurement of the AC-to-DC Converter. | |||||||||||||||||||||
| NlgpPfcTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.8 | ||||||||||||||||||||
node · current Temperature measurement of the power factor correction circuitry. | |||||||||||||||||||||
| NlgpTransformerTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.9 | ||||||||||||||||||||
node · current Temperature measurement of the transformer. | |||||||||||||||||||||
| NlgpLocalTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.10 | ||||||||||||||||||||
node · current Temperature measurement of local temperature sensor. | |||||||||||||||||||||
| NlgpLocal1Temperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.10.1 | ||||||||||||||||||||
node · current Temperature and humidity measurements of Local Sensor 1. | |||||||||||||||||||||
| NlgpLocal2Temperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.10.2 | ||||||||||||||||||||
node · current Temperature and humidity measurements of Local Sensor 2. | |||||||||||||||||||||
| NlgpLocal3Temperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.10.3 | ||||||||||||||||||||
node · current Temperature and humidity measurements of Local Sensor 3. | |||||||||||||||||||||
| NlgpDigitalScrollCompressorTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.11 | ||||||||||||||||||||
node · current Temperature and humidity measurements of a digital Scroll Compressor. | |||||||||||||||||||||
| NlgpDigitalScrollCompressor1Temperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.11.1 | ||||||||||||||||||||
node · current Temperature and humidity measurements of a digital Scroll Compressor 1. | |||||||||||||||||||||
| NlgpDigitalScrollCompressor2Temperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.11.2 | ||||||||||||||||||||
node · current Temperature and humidity measurements of a digital Scroll Compressor 2. | |||||||||||||||||||||
| NlgpChillWaterTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.12 | ||||||||||||||||||||
node · current Temperature measurements of a chill water system. | |||||||||||||||||||||
| NlgpCoolantTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.13 | ||||||||||||||||||||
node · current Temperature measurements of an environmental system's coolant. | |||||||||||||||||||||
| NlgpEnvEnclosureTemperatureSensors | 1.3.6.1.4.1.476.1.42.3.4.1.1.14 | ||||||||||||||||||||
node · current Enclosure temperature sensors | |||||||||||||||||||||
| NlgpEnvEnclosureTemperatureSensor1 | 1.3.6.1.4.1.476.1.42.3.4.1.1.14.1 | ||||||||||||||||||||
node · current Enclosure temperature sensor 1 | |||||||||||||||||||||
| NlgpEnvEnclosureTemperatureSensor2 | 1.3.6.1.4.1.476.1.42.3.4.1.1.14.2 | ||||||||||||||||||||
node · current Enclosure temperature sensor 2 | |||||||||||||||||||||
| NlgpEnvEnclosureTemperatureSensor3 | 1.3.6.1.4.1.476.1.42.3.4.1.1.14.3 | ||||||||||||||||||||
node · current Enclosure temperature sensor 3 | |||||||||||||||||||||
| NlgpEnvEnclosureTemperatureSensor4 | 1.3.6.1.4.1.476.1.42.3.4.1.1.14.4 | ||||||||||||||||||||
node · current Enclosure temperature sensor 4 | |||||||||||||||||||||
| NlgpEnvValueAmbientRoomTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.15 | ||||||||||||||||||||
node · current Temperature outside enclosure. | |||||||||||||||||||||
| NlgpEnvDewPointTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.16 | ||||||||||||||||||||
node · current The calculated temperature outside of the enclosure at which condensation is likely to occur. | |||||||||||||||||||||
| NlgpEnvEnclosureTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.17 | ||||||||||||||||||||
node · current Temperature inside of enclosure. | |||||||||||||||||||||
| NlgpEnvAdjustedTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.18 | ||||||||||||||||||||
node · current The current temperature set-point which is computed by the system and may be temporarily different from the user set-point because of external factors. | |||||||||||||||||||||
| NlgpEnvExternalSensors | 1.3.6.1.4.1.476.1.42.3.4.1.1.19 | ||||||||||||||||||||
node · current External sensors to monitor environmental variables such as temperature and humidity | |||||||||||||||||||||
| NlgpEnvExternalAirSensorA | 1.3.6.1.4.1.476.1.42.3.4.1.1.19.1 | ||||||||||||||||||||
node · current Temperature and humidity measurements from external air sensor A. | |||||||||||||||||||||
| NlgpEnvExternalAirSensorADewPoint | 1.3.6.1.4.1.476.1.42.3.4.1.1.19.2 | ||||||||||||||||||||
node · current Dewpoint temperature for External Air Sensor A. | |||||||||||||||||||||
| NlgpEnvExternalAirSensorB | 1.3.6.1.4.1.476.1.42.3.4.1.1.19.3 | ||||||||||||||||||||
node · current Temperature and humidity measurements from external air sensor B. | |||||||||||||||||||||
| NlgpEnvExternalAirSensorBDewPoint | 1.3.6.1.4.1.476.1.42.3.4.1.1.19.4 | ||||||||||||||||||||
node · current Dewpoint temperature for External Air Sensor B. | |||||||||||||||||||||
| NlgpEnvSupplyFluidTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.20 | ||||||||||||||||||||
node · current The current temperature of the fluid being supplied. | |||||||||||||||||||||
| NlgpEnvSupplyRefrigerantTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.21 | ||||||||||||||||||||
node · current The current temperature of the refrigerant being supplied. | |||||||||||||||||||||
| NlgpEnvMinDesiredRoomAirTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.22 | ||||||||||||||||||||
node · current The minimum desired room air temperature. If the room air temperature falls below this set point, the unit will reduce the cooling. | |||||||||||||||||||||
| NlgpEnvDewPointTemperatures | 1.3.6.1.4.1.476.1.42.3.4.1.1.23 | ||||||||||||||||||||
node · current This sub-tree identifies well-known dew point temperatures in the system. | |||||||||||||||||||||
| NlgpEnvInletDewPointTemperature | 1.3.6.1.4.1.476.1.42.3.4.1.1.23.1 | ||||||||||||||||||||
node · current Dew point temperature measured at the inlet of the unit. | |||||||||||||||||||||
| NlgpEnvTemperatureFahrenheit | 1.3.6.1.4.1.476.1.42.3.4.1.2 | ||||||||||||||||||||
node · current This sub-tree contains OIDs that are used to control and monitor temperature using the Fahrenheit temperature scale. | |||||||||||||||||||||
| SlgpEnvTemperatureSettingDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.1 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The temperature setting used to control the well known temperature object 'lgpEnvControlTemperature'. This setting is cloned in 'lgpEnvTemperatureSettingDegC' with the value converted to Celsius.
| |||||||||||||||||||||
| SlgpEnvTemperatureToleranceDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.2 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The acceptable variance from 'lgpEnvTemperatureSettingDegF', without initiating a control action. This setting is cloned in 'lgpEnvTemperatureToleranceDegC' with the value converted to Celsius.
| |||||||||||||||||||||
| TlgpEnvTemperatureTableDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3 | NA | |||||||||||||||||||
table · not-accessible · current A list of temperature table entries. The table contains zero, one, or many rows, depending upon the number of temperature objects available. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. The entries in this table are cloned in 'lgpEnvTemperatureTableDegC' where Fahrenheit values are converted to Celsius. | |||||||||||||||||||||
| RlgpEnvTemperatureEntryDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the contents of the rows for the table 'lgpEnvTemperatureTableDegF'. | |||||||||||||||||||||
| ClgpEnvTemperatureIdDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This OID is used as an index to identify a row in the table 'lgpEnvTemperatureTableDegF'. | |||||||||||||||||||||
| ClgpEnvTemperatureDescrDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.2 | OBJECT IDENTIFIER | RO | 1.3.6.1.4.1.476.1.42.3.5.2.1.6 | |||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current A reference to a temperature description object. The object referenced should not be accessible, but rather be used to provide a unique description of the temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureMeasurementDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3 | Integer32 | RO | 70 | |||||||||||||||||
column · Integer32 · read-only · current The measured temperature value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureHighThresholdDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The high temperature notification threshold. This is the maximum value of 'lgpEnvTemperatureMeasurementDegF' before the agent sends a notification.
| |||||||||||||||||||||
| ClgpEnvTemperatureLowThresholdDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The low temperature notification threshold. This is the minimum value of 'lgpEnvTemperatureMeasurementDegF' before the agent sends a notification.
| |||||||||||||||||||||
| ClgpEnvTemperatureSetPointDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The temperature setting for the well known 'lgpEnvTemperatureDescrDegF' point. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting based on environmental conditions and/or user configuration.
| |||||||||||||||||||||
| ClgpEnvTemperatureDailyHighDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The daily high temperature measurement.
| |||||||||||||||||||||
| ClgpEnvTemperatureDailyLowDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The daily low temperature measurement.
| |||||||||||||||||||||
| ClgpEnvTempDailyHighTimeHourDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.9 | Integer32 (0..23) | RO | ||||||||||||||||||
column · Integer32 (0..23) · read-only · current The hours digit of the time corresponding to the daily high temperature measurement.
| |||||||||||||||||||||
| ClgpEnvTempDailyHighTimeMinuteDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.10 | Integer32 (0..59) | RO | ||||||||||||||||||
column · Integer32 (0..59) · read-only · current The minutes digit of the time corresponding to the daily high temperature measurement.
| |||||||||||||||||||||
| ClgpEnvTempDailyHighTimeSecondDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.11 | Integer32 (0..59) | RO | ||||||||||||||||||
column · Integer32 (0..59) · read-only · current The seconds digit of the time corresponding to the daily high temperature measurement.
| |||||||||||||||||||||
| ClgpEnvTempDailyLowTimeHourDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.12 | Integer32 (0..23) | RO | ||||||||||||||||||
column · Integer32 (0..23) · read-only · current The hours digit of the time corresponding to the daily low temperature measurement.
| |||||||||||||||||||||
| ClgpEnvTempDailyLowTimeMinuteDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.13 | Integer32 (0..59) | RO | ||||||||||||||||||
column · Integer32 (0..59) · read-only · current The minutes digit of the time corresponding to the daily low temperature measurement.
| |||||||||||||||||||||
| ClgpEnvTempDailyLowTimeSecondDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.14 | Integer32 (0..59) | RO | ||||||||||||||||||
column · Integer32 (0..59) · read-only · current The seconds digit of the time corresponding to the daily low temperature measurement.
| |||||||||||||||||||||
| ClgpEnvTemperatureMeasurementTenthsDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.50 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The measured temperature value.
| |||||||||||||||||||||
| ClgpEnvTemperatureHighThresholdTenthsDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.51 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The high temperature notification threshold. This is the maximum value of 'lgpEnvTemperatureMeasurementTenthsDegF' before the agent sends a notification.
| |||||||||||||||||||||
| ClgpEnvTemperatureLowThresholdTenthsDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.52 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The low temperature notification threshold. This is the minimum value of 'lgpEnvTemperatureMeasurementTenthsDegF' before the agent sends a notification.
| |||||||||||||||||||||
| ClgpEnvTemperatureSetPointTenthsDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.53 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The temperature setting for the well known 'lgpEnvTemperatureDescrDegF' point. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting based on environmental conditions and/or user configuration.
| |||||||||||||||||||||
| ClgpEnvTemperatureDeadBandTenthsDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.60 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The deadband region around the setpoint value (lgpEnvTemperatureSetPointTenthsDegF) where no heating or cooling will occur.
| |||||||||||||||||||||
| ClgpEnvTempHeatingPropBandTenthsDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.61 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The proportional region below the setpoint value (lgpEnvTemperatureSetPointTenthsDegF) where heating will be proportionally controlled.
| |||||||||||||||||||||
| ClgpEnvTempCoolingPropBandTenthsDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.62 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The proportional region above the setpoint value (lgpEnvTemperatureSetPointTenthsDegF) where cooling will be proportionally controlled.
| |||||||||||||||||||||
| SlgpEnvTemperatureDeadbandRangeDegF | 1.3.6.1.4.1.476.1.42.3.4.1.2.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The allowable deviation above and below the temperature set point used to create a no control region, a dead-band, where heating and cooling control are disabled.
| |||||||||||||||||||||
| NlgpEnvTemperatureCelsius | 1.3.6.1.4.1.476.1.42.3.4.1.3 | ||||||||||||||||||||
node · current This sub-tree contains OIDs that are used to control and monitor temperature using the Celsius temperature scale. | |||||||||||||||||||||
| SlgpEnvTemperatureSettingDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.1 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The temperature setting used to control the well known temperature object 'lgpEnvControlTemperature'. This setting is cloned in 'lgpEnvTemperatureSettingDegF' with the value converted to Fahrenheit.
| |||||||||||||||||||||
| SlgpEnvTemperatureToleranceDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.2 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The acceptable variance from 'lgpEnvTemperatureSettingDegC', without initiating a control action. This setting is cloned in 'lgpEnvTemperatureToleranceDegF' with the value converted to Fahrenheit.
| |||||||||||||||||||||
| TlgpEnvTemperatureTableDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3 | NA | |||||||||||||||||||
table · not-accessible · current A list of temperature table entries. The table contains zero, one, or many rows, depending upon the number of temperature objects available. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. The entries in this table are cloned in 'lgpEnvTemperatureTableDegF' where Celsius values are converted to Fahrenheit. | |||||||||||||||||||||
| RlgpEnvTemperatureEntryDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the contents of the rows for the table 'lgpEnvTemperatureTableDegC'. | |||||||||||||||||||||
| ClgpEnvTemperatureIdDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current This OID is used as an index to identify a row in the table 'lgpEnvTemperatureTableDegC'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureDescrDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.2 | OBJECT IDENTIFIER | RO | 1.3.6.1.4.1.476.1.42.3.4.7.1.10.1.1 | |||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current A reference to a temperature description object. The object referenced should not be accessible, but rather be used to provide a unique description of the temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureMeasurementDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.3 | Integer32 | RO | 22 | |||||||||||||||||
column · Integer32 · read-only · current The measured temperature value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureHighThresholdDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.4 | Integer32 | RW | 30 | |||||||||||||||||
column · Integer32 · read-write · current The high temperature notification threshold. This is the maximum value of 'lgpEnvTemperatureMeasurementDegC' before the agent sends a notification.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureLowThresholdDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.5 | Integer32 | RW | 15 | |||||||||||||||||
column · Integer32 · read-write · current The low temperature notification threshold. This is the minimum value of 'lgpEnvTemperatureMeasurementDegC' before the agent sends a notification.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureSetPointDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.6 | Integer32 | RW | 18 | |||||||||||||||||
column · Integer32 · read-write · current The temperature setting for the well known 'lgpEnvTemperatureDescrDegC' point. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting based on environmental conditions and/or user configuration.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureDailyHighDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.7 | Integer32 | RO | 24 | |||||||||||||||||
column · Integer32 · read-only · current The daily high temperature measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureDailyLowDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.8 | Integer32 | RO | 24 | |||||||||||||||||
column · Integer32 · read-only · current The daily low temperature measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTempDailyHighTimeHourDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.9 | Integer32 (0..23) | RO | 10 | |||||||||||||||||
column · Integer32 (0..23) · read-only · current The hours digit of the time corresponding to the daily high temperature measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTempDailyHighTimeMinuteDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.10 | Integer32 (0..59) | RO | 12 | |||||||||||||||||
column · Integer32 (0..59) · read-only · current The minutes digit of the time corresponding to the daily high temperature measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTempDailyHighTimeSecondDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.11 | Integer32 (0..59) | RO | 56 | |||||||||||||||||
column · Integer32 (0..59) · read-only · current The seconds digit of the time corresponding to the daily high temperature measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTempDailyLowTimeHourDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.12 | Integer32 (0..23) | RO | 9 | |||||||||||||||||
column · Integer32 (0..23) · read-only · current The hours digit of the time corresponding to the daily low temperature measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTempDailyLowTimeMinuteDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.13 | Integer32 (0..59) | RO | 16 | |||||||||||||||||
column · Integer32 (0..59) · read-only · current The minutes digit of the time corresponding to the daily low temperature measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTempDailyLowTimeSecondDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.14 | Integer32 (0..59) | RO | 25 | |||||||||||||||||
column · Integer32 (0..59) · read-only · current The seconds digit of the time corresponding to the daily low temperature measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvTemperatureMeasurementTenthsDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.50 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The measured temperature value.
| |||||||||||||||||||||
| ClgpEnvTemperatureHighThresholdTenthsDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.51 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The high temperature notification threshold. This is the maximum value of 'lgpEnvTemperatureMeasurementTenthsDegC' before the agent sends a notification.
| |||||||||||||||||||||
| ClgpEnvTemperatureLowThresholdTenthsDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.52 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The low temperature notification threshold. This is the minimum value of 'lgpEnvTemperatureMeasurementTenthsDegC' before the agent sends a notification.
| |||||||||||||||||||||
| ClgpEnvTemperatureSetPointTenthsDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.53 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The temperature setting for the well known 'lgpEnvTemperatureDescrDegC' point. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting based on environmental conditions and/or user configuration.
| |||||||||||||||||||||
| ClgpEnvTemperatureDeadBandTenthsDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.60 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The deadband region around the setpoint value (lgpEnvTemperatureSetPointTenthsDegC) where no heating or cooling will occur.
| |||||||||||||||||||||
| ClgpEnvTempHeatingPropBandTenthsDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.61 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The proportional region below the setpoint value (lgpEnvTemperatureSetPointTenthsDegC) where heating will be proportionally controlled.
| |||||||||||||||||||||
| ClgpEnvTempCoolingPropBandTenthsDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.62 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The proportional region above the setpoint value (lgpEnvTemperatureSetPointTenthsDegC) where cooling will be proportionally controlled.
| |||||||||||||||||||||
| SlgpEnvTemperatureDeadbandRangeDegC | 1.3.6.1.4.1.476.1.42.3.4.1.3.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The allowable deviation above and below the temperature set point used to create a no control region, a dead-band, where heating and cooling control are disabled.
| |||||||||||||||||||||
| SlgpEnvTemperatureControlMode | 1.3.6.1.4.1.476.1.42.3.4.1.4 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
scalar · OBJECT IDENTIFIER · read-only · current A reference to a temperature description object. The object referenced should not be accessible, but rather be used to provide a unique description of the temperature object that is used for control. | |||||||||||||||||||||
| NlgpEnvHumidity | 1.3.6.1.4.1.476.1.42.3.4.2 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert humidity object identifiers. | |||||||||||||||||||||
| NlgpEnvHumidityWellKnown | 1.3.6.1.4.1.476.1.42.3.4.2.1 | ||||||||||||||||||||
node · current Liebert well known humidity objects are defined by OIDs that reside in this sub-tree. | |||||||||||||||||||||
| NlgpEnvControlHumidity | 1.3.6.1.4.1.476.1.42.3.4.2.1.1 | ||||||||||||||||||||
node · current Humidity measurement used as control feedback. | |||||||||||||||||||||
| NlgpEnvReturnAirHumidity | 1.3.6.1.4.1.476.1.42.3.4.2.1.2 | ||||||||||||||||||||
node · current Humidity measurement of return air. | |||||||||||||||||||||
| NlgpEnvSupplyAirHumidity | 1.3.6.1.4.1.476.1.42.3.4.2.1.3 | ||||||||||||||||||||
node · current Humidity measurement of supply air. | |||||||||||||||||||||
| NlgpEnvValueAmbientHumidity | 1.3.6.1.4.1.476.1.42.3.4.2.1.4 | ||||||||||||||||||||
node · current Humidity outside enclosure. | |||||||||||||||||||||
| NlgpEnvHumidityRelative | 1.3.6.1.4.1.476.1.42.3.4.2.2 | ||||||||||||||||||||
node · current This sub-tree contains OIDs that are used to control and monitor relative humidity. | |||||||||||||||||||||
| SlgpEnvHumiditySettingRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.1 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The humidity setting used to control the well known humidity point.
| |||||||||||||||||||||
| SlgpEnvHumidityToleranceRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.2 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Acceptable variance from lgpEnvHumiditySettingRel, without initiating a control action.
| |||||||||||||||||||||
| TlgpEnvHumidityTableRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.3 | NA | |||||||||||||||||||
table · not-accessible · current A list of humidity table entries. The table contains zero, one, or many rows, depending upon the number of humidity objects available. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. | |||||||||||||||||||||
| RlgpEnvHumidityEntryRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the contents of the rows for the table 'lgpEnvHumidityTableRel'.
| |||||||||||||||||||||
| ClgpEnvHumidityIdRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current This OID is used as an index to identify a row in the table 'lgpEnvHumidityTableRel'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDescrRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.2 | OBJECT IDENTIFIER | RO | 1.3.6.1.4.1.476.1.42.3.4.2.1.1 | |||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current A reference to a humidity description object. The object referenced should not be accessible, but rather be used to provide a unique description of the humidity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityMeasurementRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.3 | Integer32 | RO | 34 | |||||||||||||||||
column · Integer32 · read-only · current The measured humidity value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityHighThresholdRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.4 | Integer32 | RW | 80 | |||||||||||||||||
column · Integer32 · read-write · current The high humidity notification threshold. This is the maximum value of 'lgpEnvHumidityMeasurementRel' before the agent sends a notification.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityLowThresholdRel | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.5 | Integer32 | RW | 1 | |||||||||||||||||
column · Integer32 · read-write · current The low humidity notification threshold. This is the minimum value of 'lgpEnvHumidityMeasurementRel' before the agent sends a notification.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumiditySetPoint | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.6 | Integer32 | RW | 35 | |||||||||||||||||
column · Integer32 · read-write · current The humidity setting used to control the well known humidity object 'lgpEnvHumidityDescrRel'. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control setting based on environmental conditions and/or user configuration.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDailyHigh | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.7 | Integer32 | RO | 37 | |||||||||||||||||
column · Integer32 · read-only · current The daily high relative humidity measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDailyLow | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.8 | Integer32 | RO | 33 | |||||||||||||||||
column · Integer32 · read-only · current The daily low relative humidity measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDailyHighTimeHour | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.9 | Integer32 (0..23) | RO | 4 | |||||||||||||||||
column · Integer32 (0..23) · read-only · current The hours digit of the time corresponding to the daily high humidity measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDailyHighTimeMinute | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.10 | Integer32 (0..59) | RO | 10 | |||||||||||||||||
column · Integer32 (0..59) · read-only · current The minutes digit of the time corresponding to the daily high humidity measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDailyHighTimeSecond | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.11 | Integer32 (0..59) | RO | 39 | |||||||||||||||||
column · Integer32 (0..59) · read-only · current The seconds digit of the time corresponding to the daily high humidity measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDailyLowTimeHour | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.12 | Integer32 (0..23) | RO | 13 | |||||||||||||||||
column · Integer32 (0..23) · read-only · current The hours digit of the time corresponding to the daily low humidity measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDailyLowTimeMinute | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.13 | Integer32 (0..59) | RO | 59 | |||||||||||||||||
column · Integer32 (0..59) · read-only · current The minutes digit of the time corresponding to the daily low humidity measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDailyLowTimeSecond | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.14 | Integer32 (0..59) | RO | 34 | |||||||||||||||||
column · Integer32 (0..59) · read-only · current The seconds digit of the time corresponding to the daily low humidity measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvHumidityDeadBand | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.15 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The deadband region around the setpoint value (lgpEnvHumiditySetPoint) where no humidifying or dehumidifying will occur.
| |||||||||||||||||||||
| ClgpEnvHumidifyPropBand | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.16 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The proportional region below the setpoint value (lgpEnvHumiditySetPoint) where humidifying will be proportionally controlled.
| |||||||||||||||||||||
| ClgpEnvDehumidifyPropBand | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.17 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The proportional region above the setpoint value (lgpEnvHumiditySetPoint) where dehumidifying will be proportionally controlled.
| |||||||||||||||||||||
| ClgpEnvHumidityMeasurementRelTenths | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.50 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The measured humidity value.
| |||||||||||||||||||||
| ClgpEnvHumidityHighThresholdRelTenths | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.51 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The high humidity notification threshold. This is the maximum value of 'lgpEnvHumidityMeasurementRelTenths' before the agent sends a notification.
| |||||||||||||||||||||
| ClgpEnvHumidityLowThresholdRelTenths | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.52 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The low humidity notification threshold. This is the minimum value of 'lgpEnvHumidityMeasurementRelTenths' before the agent sends a notification.
| |||||||||||||||||||||
| SlgpEnvHumidityDeadbandRange | 1.3.6.1.4.1.476.1.42.3.4.2.2.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The allowable deviation above and below the humidity set point used to create a no control region, a dead-band, where humidifying and dehumidifying control are disabled.
| |||||||||||||||||||||
| NlgpEnvState | 1.3.6.1.4.1.476.1.42.3.4.3 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert environmental state object identifiers. | |||||||||||||||||||||
| SlgpEnvStateSystem | 1.3.6.1.4.1.476.1.42.3.4.3.1 | INTEGER | RO | on(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of the system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateCooling | 1.3.6.1.4.1.476.1.42.3.4.3.2 | INTEGER | RO | on(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of the cooling subsystem.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateHeating | 1.3.6.1.4.1.476.1.42.3.4.3.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of the heating subsystem.
| |||||||||||||||||||||
| SlgpEnvStateHumidifying | 1.3.6.1.4.1.476.1.42.3.4.3.4 | INTEGER | RO | off(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of the humidifier subsystem.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateDehumidifying | 1.3.6.1.4.1.476.1.42.3.4.3.5 | INTEGER | RO | off(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of the dehumidifier subsystem
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateEconoCycle | 1.3.6.1.4.1.476.1.42.3.4.3.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of the Econ-o-cycle subsystem.
| |||||||||||||||||||||
| SlgpEnvStateFan | 1.3.6.1.4.1.476.1.42.3.4.3.7 | INTEGER | RO | on(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of the system fan.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateGeneralAlarmOutput | 1.3.6.1.4.1.476.1.42.3.4.3.8 | INTEGER | RO | off(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of the general alarm output. This indicates if an alarm is active in the system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateCoolingCapacity | 1.3.6.1.4.1.476.1.42.3.4.3.9 | Unsigned32 | RO | 13 | |||||||||||||||||
scalar · Unsigned32 · read-only · current The percentage of the cooling capacity presently in use.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateHeatingCapacity | 1.3.6.1.4.1.476.1.42.3.4.3.10 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The percentage of the heating capacity presently in use.
| |||||||||||||||||||||
| SlgpEnvStateAudibleAlarm | 1.3.6.1.4.1.476.1.42.3.4.3.11 | INTEGER | RO | off(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of the audible alarm output.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NlgpEnvStateCoolingUnits | 1.3.6.1.4.1.476.1.42.3.4.3.12 | ||||||||||||||||||||
node · current This sub-tree contains OIDs that are used to indicate the status of cooling units. | |||||||||||||||||||||
| SlgpEnvStateCoolingUnit1 | 1.3.6.1.4.1.476.1.42.3.4.3.12.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of cooling unit 1.
| |||||||||||||||||||||
| SlgpEnvStateCoolingUnit2 | 1.3.6.1.4.1.476.1.42.3.4.3.12.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of cooling unit 2.
| |||||||||||||||||||||
| SlgpEnvStateCoolingUnit3 | 1.3.6.1.4.1.476.1.42.3.4.3.12.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of cooling unit 3.
| |||||||||||||||||||||
| SlgpEnvStateCoolingUnit4 | 1.3.6.1.4.1.476.1.42.3.4.3.12.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of cooling unit 4.
| |||||||||||||||||||||
| NlgpEnvStateHeatingUnits | 1.3.6.1.4.1.476.1.42.3.4.3.13 | ||||||||||||||||||||
node · current This sub-tree contains OIDs that are used to indicate the status of heating units. | |||||||||||||||||||||
| SlgpEnvStateHeatingUnit1 | 1.3.6.1.4.1.476.1.42.3.4.3.13.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of heating unit 1.
| |||||||||||||||||||||
| SlgpEnvStateHeatingUnit2 | 1.3.6.1.4.1.476.1.42.3.4.3.13.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of heating unit 2.
| |||||||||||||||||||||
| SlgpEnvStateHeatingUnit3 | 1.3.6.1.4.1.476.1.42.3.4.3.13.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of heating unit 3.
| |||||||||||||||||||||
| SlgpEnvStateHeatingUnit4 | 1.3.6.1.4.1.476.1.42.3.4.3.13.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of heating unit 4.
| |||||||||||||||||||||
| SlgpEnvStateOperatingReason | 1.3.6.1.4.1.476.1.42.3.4.3.14 | INTEGER | RO | none(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The reason for the current operating state of the system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateOperatingMode | 1.3.6.1.4.1.476.1.42.3.4.3.15 | INTEGER | RO | auto(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The present operating mode of the system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateFanCapacity | 1.3.6.1.4.1.476.1.42.3.4.3.16 | Unsigned32 | RO | 50 | |||||||||||||||||
scalar · Unsigned32 · read-only · current The percentage of the fan capacity presently in use.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateFreeCoolingCapacity | 1.3.6.1.4.1.476.1.42.3.4.3.17 | Unsigned32 | RO | 0 | |||||||||||||||||
scalar · Unsigned32 · read-only · current The percentage of the free cooling capacity presently in use.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateDehumidifyingCapacity | 1.3.6.1.4.1.476.1.42.3.4.3.18 | Unsigned32 | RO | 0 | |||||||||||||||||
scalar · Unsigned32 · read-only · current The percentage of the dehumidifying capacity presently in use.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateHumidifyingCapacity | 1.3.6.1.4.1.476.1.42.3.4.3.19 | Unsigned32 | RO | 0 | |||||||||||||||||
scalar · Unsigned32 · read-only · current The percentage of the humidifying capacity presently in use.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateFreeCooling | 1.3.6.1.4.1.476.1.42.3.4.3.20 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The present state of the system free cooling process of heat exchange. When 'off', free cooling is not in use. When 'on' free cooling is in use. When 'start', free cooling is preparing to turn on. When 'unavailable', the state information is unavailable.
| |||||||||||||||||||||
| SlgpEnvStateElectricHeater | 1.3.6.1.4.1.476.1.42.3.4.3.21 | INTEGER | RO | off(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of the electric heaters.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateHotWater | 1.3.6.1.4.1.476.1.42.3.4.3.22 | INTEGER | RO | off(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The present state of hot water system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvStateOperatingEfficiency | 1.3.6.1.4.1.476.1.42.3.4.3.23 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The ratio of cooling energy provided to the amount of total energy being used.
| |||||||||||||||||||||
| TlgpEnvComponentStateTable | 1.3.6.1.4.1.476.1.42.3.4.3.50 | NA | |||||||||||||||||||
table · not-accessible · current This table contains a list of the units components that have a state associated with them. The table contains zero, one, or more rows, depending upon the number of components associated with the unit. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the units being monitored. | |||||||||||||||||||||
| RlgpEnvComponentStateEntry | 1.3.6.1.4.1.476.1.42.3.4.3.50.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the attributes to be populated in the various columns of the 'lgpEnvComponentStateTable'. | |||||||||||||||||||||
| ClgpEnvComponentStateIndex | 1.3.6.1.4.1.476.1.42.3.4.3.50.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This is the index indicating the nth element of the table. | |||||||||||||||||||||
| ClgpEnvComponentStateDescr | 1.3.6.1.4.1.476.1.42.3.4.3.50.1.2 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current A reference to a component description object. The object referenced should not be accessible, but rather be used to provide a unique description of the component being described in the row of the table. | |||||||||||||||||||||
| ClgpEnvComponentState | 1.3.6.1.4.1.476.1.42.3.4.3.50.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current not-specified The state of the component is unknown. on The component is on. off The component is off.
| |||||||||||||||||||||
| TlgpEnvValveTable | 1.3.6.1.4.1.476.1.42.3.4.3.70 | NA | |||||||||||||||||||
table · not-accessible · current This table contains a list of the unit valves that have information associated with them. The table contains zero, one, or more rows, depending upon the number of valves associated with the unit. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the units being monitored. | |||||||||||||||||||||
| RlgpEnvValveEntry | 1.3.6.1.4.1.476.1.42.3.4.3.70.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the attributes to be populated in the various columns of the 'lgpEnvValveTable'.
| |||||||||||||||||||||
| ClgpEnvValveIndex | 1.3.6.1.4.1.476.1.42.3.4.3.70.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This is the index indicating the nth element of the table. | |||||||||||||||||||||
| ClgpEnvValveDescr | 1.3.6.1.4.1.476.1.42.3.4.3.70.1.2 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current A reference to a valve description object. The object referenced should not be accessible, but rather be used to provide a unique description of the valve being described in the row of the table. | |||||||||||||||||||||
| ClgpEnvValveState | 1.3.6.1.4.1.476.1.42.3.4.3.70.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current not-specified The state of the component is unknown. open The valve is open. off The valve is closed.
| |||||||||||||||||||||
| ClgpEnvValvePositionTenths | 1.3.6.1.4.1.476.1.42.3.4.3.70.1.20 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This gives a value describing the position of the valve.
| |||||||||||||||||||||
| NlgpEnvConfig | 1.3.6.1.4.1.476.1.42.3.4.4 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert environmental configuration object identifiers. | |||||||||||||||||||||
| SlgpEnvConfigReheatLockout | 1.3.6.1.4.1.476.1.42.3.4.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current If locked-out the reheats will not operate even if controller calls for its operation.
| |||||||||||||||||||||
| SlgpEnvConfigHumLockout | 1.3.6.1.4.1.476.1.42.3.4.4.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current If locked-out the humidifier will not operate even if controller calls for its operation.
| |||||||||||||||||||||
| SlgpEnvConfigRestartDelay | 1.3.6.1.4.1.476.1.42.3.4.4.4 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current When utility power is disrupted, this is the delay interval to wait before restarting the system after the utility power is restored. A Restart Delay of zero denotes a manual restart, the unit will NOT automatically restart.
| |||||||||||||||||||||
| SlgpEnvConfigRemoteShutdown | 1.3.6.1.4.1.476.1.42.3.4.4.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current When in the disabled state, the remote shutdown feature should be locked out. The enabled state is self-describing.
| |||||||||||||||||||||
| SlgpEnvConfigCoolingServiceInterval | 1.3.6.1.4.1.476.1.42.3.4.4.8 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current The amount of time, in hours, between scheduled maintenance of the cooling system. When the cooling service timer reaches this value an lgpConditionServiceCooling will be activated. Once service has been completed the cooling service timer should be reset to 0.
| |||||||||||||||||||||
| SlgpEnvConfigHumidifierServiceInterval | 1.3.6.1.4.1.476.1.42.3.4.4.9 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current The amount of time, in hours, between scheduled maintenance of the humidifier. When the humidifier service timer reaches this value an lgpConditionServiceHumidifier will be activated. Once service has been completed humidifier service timer should be reset to 0.
| |||||||||||||||||||||
| SlgpEnvConfigFilterServiceInterval | 1.3.6.1.4.1.476.1.42.3.4.4.10 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current The amount of time, in hours, between scheduled maintenance of the system filter. When the filter service timer reaches this value an lgpConditionChangeFilter will be activated. Once service has been completed the filter service timer should be reset to 0.
| |||||||||||||||||||||
| SlgpEnvConfigSleepModeDeadbandRangeDegC | 1.3.6.1.4.1.476.1.42.3.4.4.11 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The allowable deviation above and below the temperature set point used to create a no control region, a dead-band, where heating and cooling control are disabled. This dead-band is applied only when the system's sleep mode function is in operation.
| |||||||||||||||||||||
| SlgpEnvConfigSleepModeDeadbandRangeDegF | 1.3.6.1.4.1.476.1.42.3.4.4.12 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The allowable deviation above and below the temperature set point used to create a no control region, a dead-band, where heating and cooling control are disabled. This dead-band is applied only when the system's sleep mode function is in operation.
| |||||||||||||||||||||
| SlgpEnvConfigSupplyTempLowLimitDegF | 1.3.6.1.4.1.476.1.42.3.4.4.13 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The minimum allowable supply temperature.
| |||||||||||||||||||||
| SlgpEnvConfigSupplyTempLowLimitDegC | 1.3.6.1.4.1.476.1.42.3.4.4.14 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The minimum allowable supply temperature.
| |||||||||||||||||||||
| SlgpEnvConfigTemperatureIntegTime | 1.3.6.1.4.1.476.1.42.3.4.4.15 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The value used as the integration factor in the proportional integral derivative (PID) temperature calculation.
| |||||||||||||||||||||
| SlgpEnvConfigLocalTemperatureUnit | 1.3.6.1.4.1.476.1.42.3.4.4.16 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The local temperature unit of the system.
| |||||||||||||||||||||
| SlgpEnvConfigSleepMode | 1.3.6.1.4.1.476.1.42.3.4.4.17 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The configured mode of the device's sleep function. If 'enabled', the device will sleep, or not operate, for each 'lgpEnvSleepDay' that is enabled and also during the periods defined in the 'lgpEnvSleepTimeTable' each day. If 'disabled', the device will operate continually and not sleep at all. If 'auto', the device will sleep, or not operate, for each 'lgpEnvSleepDay' that is enabled and also during the periods defined in the 'lgpEnvSleepTimeTable' each day unless the environmental conditions fall outside the desired operation ranges.
| |||||||||||||||||||||
| SlgpEnvConfigHumidityIntegTime | 1.3.6.1.4.1.476.1.42.3.4.4.18 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The value used as the integration factor in the proportional integral derivative (PID) humidity calculation.
| |||||||||||||||||||||
| SlgpEnvConfigFreecoolingDeltaDegF | 1.3.6.1.4.1.476.1.42.3.4.4.19 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The minimum temperature differential between the control temperature measurement and the coolant required to utilize free-cooling.
| |||||||||||||||||||||
| SlgpEnvConfigFreecoolingDeltaDegC | 1.3.6.1.4.1.476.1.42.3.4.4.20 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The minimum temperature differential between the control temperature measurement and the coolant required to utilize free-cooling.
| |||||||||||||||||||||
| SlgpEnvConfigSupplyTempLowLimit | 1.3.6.1.4.1.476.1.42.3.4.4.21 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system configuration parameter to enable or disable the supply air low temperature limit.
| |||||||||||||||||||||
| SlgpEnvConfigSensorEventsStandard | 1.3.6.1.4.1.476.1.42.3.4.4.22 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system configuration parameter to enable or disable the standard sensor events.
| |||||||||||||||||||||
| SlgpEnvConfigSensorEvents1 | 1.3.6.1.4.1.476.1.42.3.4.4.23 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system configuration parameter to enable or disable sensor 1 events.
| |||||||||||||||||||||
| SlgpEnvConfigSleepModeDeadbandRange | 1.3.6.1.4.1.476.1.42.3.4.4.24 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system configuration parameter to enable or disable the use of the sleep interval dead-band range in the sleep mode temperature calculations and control algorithm.
| |||||||||||||||||||||
| SlgpEnvConfigAutoConfiguration | 1.3.6.1.4.1.476.1.42.3.4.4.25 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system configuration parameter to enable or disable the auto configuration feature. This feature configures temperature and humidity control parameters.
| |||||||||||||||||||||
| SlgpEnvConfigDeltaGlycolType | 1.3.6.1.4.1.476.1.42.3.4.4.26 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system configuration parameter that specifies how the system will determine if there is enough capacity to initiate free cooling. If 'disabled', the system will use the valve temperature to initiate free cooling. If 'contact', a input to the system will initiate free cooling. If 'valve', the system compares the room and glycol temperature differential with the valve temperature to initiate free cooling. If the temperature differential is greater than or equal to the valve temperature, free cooling will be initiated.
| |||||||||||||||||||||
| SlgpEnvConfigChillWaterControl | 1.3.6.1.4.1.476.1.42.3.4.4.27 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system configuration parameter to enable or disable the minimum chill water temperature control.
| |||||||||||||||||||||
| SlgpEnvConfigInfaredFlushRate | 1.3.6.1.4.1.476.1.42.3.4.4.28 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current The Infrared humidifier pan overfill rate. This parameter configures the amount of water that flows into the humidifier pan when the 'humidifier is in operation.
| |||||||||||||||||||||
| SlgpEnvConfigHumidityControl | 1.3.6.1.4.1.476.1.42.3.4.4.29 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The present configured state of the automatic humidity compensation algorithm.
| |||||||||||||||||||||
| SlgpEnvConfigCompressorLockout | 1.3.6.1.4.1.476.1.42.3.4.4.30 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system as locked out the compressor(s). If locked-out, the compressor(s) will not operate even if the controller calls for their operation.
| |||||||||||||||||||||
| SlgpEnvConfigReheatAndHumidifierLockout | 1.3.6.1.4.1.476.1.42.3.4.4.31 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system as locked out the compressor(s). If locked-out, the electrical reheats and humidifier will not operate even if the controller calls for their operation.
| |||||||||||||||||||||
| TlgpEnvOperationalTimeTable | 1.3.6.1.4.1.476.1.42.3.4.4.32 | NA | |||||||||||||||||||
table · not-accessible · current A list of environmental operational time ranges for a given environmental unit. The entries in this table may be duplicated from values in the 'lgpEnvStatistics' group. This table contains zero, one, or many rows, depending upon the number of 'lgpEnvOperationTimePoint' and 'lgpEnvOperationTimeSubID' available in the table. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. | |||||||||||||||||||||
| RlgpEnvOperationalTimeEntry | 1.3.6.1.4.1.476.1.42.3.4.4.32.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the contents of the columns for the table 'lgpEnvOperationalTimeTable'. | |||||||||||||||||||||
| ClgpEnvOperationTimeIndex | 1.3.6.1.4.1.476.1.42.3.4.4.32.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This is the index indicating the nth element of the table. | |||||||||||||||||||||
| ClgpEnvOperationTimePoint | 1.3.6.1.4.1.476.1.42.3.4.4.32.1.2 | OBJECT IDENTIFIER | RO | 1.3.6.1.4.1.476.1.42.3.4.7.1.1 | |||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current An OID representing a well known operation point. These object identifiers can indicate a point, location, or mode of an operation for which a measurement is recorded. The OID's name usually implies a location of the measurement point such as 'fan', 'compressor', etc. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvOperationTimeSubID | 1.3.6.1.4.1.476.1.42.3.4.4.32.1.3 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current This is a sub identifier for the 'lgpEnvOperationPoint'. It indicates the instance number of the well known operation point. For example, a system could have two fans installed. This variable would identify fan 1 with a lgpEnvOperationSubID equal to 1 and fan 2 with a lgpEnvOperationSubID equal to 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvOperationTimeUnit | 1.3.6.1.4.1.476.1.42.3.4.4.32.1.4 | OBJECT IDENTIFIER | RO | 1.3.6.1.4.1.476.1.42.3.4.8.1.1 | |||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current An OID representing a well known operation time unit type. These object identifiers indicate the units of the operation time. The OID's name usually implies a measurement type such as 'lgpEnvHours', etc. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvOperationTimeValue | 1.3.6.1.4.1.476.1.42.3.4.4.32.1.5 | Integer32 | RW | 5353 | |||||||||||||||||
column · Integer32 · read-write · current The actual operation time value of the 'lgpEnvOperationTimePoint'. If multiple operation times are available for a 'lgpEnvOperationTimePoint' the 'lgpEnvOperationTimeSubID' will differentiate between them.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClgpEnvOperationTimeHighWarning | 1.3.6.1.4.1.476.1.42.3.4.4.32.1.6 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The high warning time of the operation designated by the 'lgpEnvOperationTimePoint'. If operation times are available at a single 'lgpEnvOperationTimePoint' the 'lgpEnvOperationTimeSubID' will differentiate between them.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlgpEnvConfigTempControlAlgorithm | 1.3.6.1.4.1.476.1.42.3.4.4.33 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Selects the algorithm for controlling temperature.
| |||||||||||||||||||||
| SlgpEnvConfigFanSpeedMode | 1.3.6.1.4.1.476.1.42.3.4.4.34 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Changes the function of the fan speed output. If auto, then the fan speed is modulated. If manual, the fan speed output follows lgpEnvConfigFanSpeedCapacity.
| |||||||||||||||||||||
| SlgpEnvConfigFanSpeedCapacity | 1.3.6.1.4.1.476.1.42.3.4.4.35 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current Sets the fan speed output if lgpEnvConfigFanSpeedMode is set to 'manual'. Typical values range from 0 to 100% (actual valid ranges may differ from unit to unit).
| |||||||||||||||||||||
| SlgpEnvConfigBmsResetTimer | 1.3.6.1.4.1.476.1.42.3.4.4.36 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current The current count-down time for a BMS to continue controlling the fan speed. If this value reaches 0, then the condition lgpConditionBmsResetTimerExpired will be generated. If a BMS wants to continue controlling the fan speed, it must reset this timer. Typical values range from 0 to 120 minutes (actual valid ranges may differ from unit to unit).
| |||||||||||||||||||||
| SlgpEnvConfigDisableSensorOffsetDegC | 1.3.6.1.4.1.476.1.42.3.4.4.37 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current If any of the enclosure temperature sensors (lgpEnvEnclosureTemperatureSensors) are outside the average reading by this amount, that sensor's readings will not be used.
| |||||||||||||||||||||
| SlgpEnvConfigDisableSensorOffsetDegF | 1.3.6.1.4.1.476.1.42.3.4.4.38 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current If any of the enclosure temperature sensors (lgpEnvEnclosureTemperatureSensors) are outside the average reading by this amount, that sensor's readings will not be used.
| |||||||||||||||||||||
| SlgpEnvConfigCabinetSensorAlarms | 1.3.6.1.4.1.476.1.42.3.4.4.39 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable or Disable Cabinet Sensor Alarms.
| |||||||||||||||||||||
| SlgpEnvConfigAirTemperatureControlSensor | 1.3.6.1.4.1.476.1.42.3.4.4.42 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Sensor from which air temperature measurements will be used for cooling and heating control.
| |||||||||||||||||||||
| SlgpEnvConfigFanSpeedControlSensor | 1.3.6.1.4.1.476.1.42.3.4.4.43 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Sensor from which air temperature measurements will be used for fan speed control.
| |||||||||||||||||||||
| SlgpEnvConfigMinFanSpeed | 1.3.6.1.4.1.476.1.42.3.4.4.44 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current Sets the minimum fan speed output if lgpEnvConfigFanSpeedMode is set to 'Auto'.
| |||||||||||||||||||||
| SlgpEnvConfigMaxFanSpeed | 1.3.6.1.4.1.476.1.42.3.4.4.45 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current Sets the maximum fan speed output if lgpEnvConfigFanSpeedMode is set to 'Auto'.
| |||||||||||||||||||||
| SlgpEnvConfigFanSpeedPropBandDegC | 1.3.6.1.4.1.476.1.42.3.4.4.46 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Temperature control band above the temperature set point calculated for proportional fan speed control. If measured air temperature is within this band, fan speed operations are proportionally controlled.
| |||||||||||||||||||||
| SlgpEnvConfigFanSpeedPropBandDegF | 1.3.6.1.4.1.476.1.42.3.4.4.47 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Temperature control band above the temperature set point calculated for proportional fan speed control. If measured air temperature is within this band, fan speed operations are proportionally controlled.
| |||||||||||||||||||||
| NlgpEnvControl | 1.3.6.1.4.1.476.1.42.3.4.5 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert environmental control object identifiers. | |||||||||||||||||||||
| SlgpEnvControlShutdownAfterDelay | 1.3.6.1.4.1.476.1.42.3.4.5.1 | Integer32 (-1..2147483647) | RW | ||||||||||||||||||
scalar · Integer32 (-1..2147483647) · read-write · current Setting this object will shutdown (i.e., turn off) the system after the indicated number of seconds. Setting this object to 0 will cause the shutdown to occur immediately. Setting this object to -1 will abort the countdown. If the system is already in the desired state at the time the countdown reaches 0, then nothing will happen. When read, lgpEnvControlShutdownAfterDelay will return the number of seconds remaining until shutdown, or -1 if no shutdown countdown is in effect. On some systems, if the agent is restarted while a shutdown countdown is in effect, the countdown may be aborted. Sets to this object override any lgpEnvControlShutdownAfterDelay already in effect.
| |||||||||||||||||||||
| SlgpEnvControlStartupAfterDelay | 1.3.6.1.4.1.476.1.42.3.4.5.2 | Integer32 (-1..2147483647) | RW | ||||||||||||||||||
scalar · Integer32 (-1..2147483647) · read-write · current Setting this object will start the system after the indicated number of seconds. Setting this object to 0 will cause the startup to occur immediately. Setting this object to -1 will abort the countdown. If the system is already on at the time the countdown reaches 0, then nothing will happen. Sets to this object override the effect of any lgpEnvControlStartupAfterDelay countdown in progress. When read, lgpEnvControlStartupAfterDelay will return the number of seconds until startup, or -1 if no startup countdown is in effect. On some systems, if the agent is restarted while a startup countdown is in effect, the countdown is aborted.
| |||||||||||||||||||||
| TlgpEnvSleepIntervalTimeTable | 1.3.6.1.4.1.476.1.42.3.4.5.3 | NA | |||||||||||||||||||
table · not-accessible · current A sleep time interval table containing a list of the start and stop times to be used to take a device online or offline. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. | |||||||||||||||||||||
| RlgpEnvSleepIntervalTimeEntry | 1.3.6.1.4.1.476.1.42.3.4.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the contents of the columns for the table 'lgpEnvSleepIntervalTimeTable'.
| |||||||||||||||||||||
| ClgpEnvSleepTimeIndex | 1.3.6.1.4.1.476.1.42.3.4.5.3.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This is the index indicating the row of the table 'lgpEnvSleepIntervalTimeTable'. | |||||||||||||||||||||
| ClgpEnvSleepTimeSubID | 1.3.6.1.4.1.476.1.42.3.4.5.3.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This is a sub identifier for each 'lgpEnvSleepIntervalTimeEntry'. It indicates the instance number of the 'lgpEnvSleepIntervalTimeEntry'. For example, a system could have two sleep intervals and the first interval's sub ID would be 1 and the second interval's sub ID would be 2. | |||||||||||||||||||||
| ClgpEnvSleepTimeStartHour | 1.3.6.1.4.1.476.1.42.3.4.5.3.1.3 | Integer32 (0..23) | RW | ||||||||||||||||||
column · Integer32 (0..23) · read-write · current This is the hours digit of the time when the system will be put online.
| |||||||||||||||||||||
| ClgpEnvSleepTimeStartMinute | 1.3.6.1.4.1.476.1.42.3.4.5.3.1.4 | Integer32 (0..59) | RW | ||||||||||||||||||
column · Integer32 (0..59) · read-write · current This is the minutes digit of the time when the system will be put online.
| |||||||||||||||||||||
| ClgpEnvSleepTimeStopHour | 1.3.6.1.4.1.476.1.42.3.4.5.3.1.5 | Integer32 (0..23) | RW | ||||||||||||||||||
column · Integer32 (0..23) · read-write · current This is the hours digit containing the time when the system will be taken offline.
| |||||||||||||||||||||
| ClgpEnvSleepTimeStopMinute | 1.3.6.1.4.1.476.1.42.3.4.5.3.1.6 | Integer32 (0..59) | RW | ||||||||||||||||||
column · Integer32 (0..59) · read-write · current This is the minutes digit containing the time when the system will be taken offline.
| |||||||||||||||||||||
| TlgpEnvSleepDayTable | 1.3.6.1.4.1.476.1.42.3.4.5.4 | NA | |||||||||||||||||||
table · not-accessible · current A sleep table containing a list of the days of the week the system will be offline. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. | |||||||||||||||||||||
| RlgpEnvSleepDayEntry | 1.3.6.1.4.1.476.1.42.3.4.5.4.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the contents of the columns for the table 'lgpEnvSleepDayTable'.
| |||||||||||||||||||||
| ClgpEnvSleepDayIndex | 1.3.6.1.4.1.476.1.42.3.4.5.4.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This is the index indicating the row of the table 'lgpEnvSleepDayTable'. | |||||||||||||||||||||
| ClgpEnvSleepDay | 1.3.6.1.4.1.476.1.42.3.4.5.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This is a sub identifier for the day of the week within 'lgpEnvSleepDayTable'.
| |||||||||||||||||||||
| ClgpEnvSleepAllDayEnabled | 1.3.6.1.4.1.476.1.42.3.4.5.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The all day sleep functionality has been enabled for the corresponding 'lgpEnvSleepDay' in the 'lgpEnvSleepDayTable'.
| |||||||||||||||||||||
| NlgpEnvStatistics | 1.3.6.1.4.1.476.1.42.3.4.6 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert environmental statistic object identifiers. | |||||||||||||||||||||
| SlgpEnvStatisticsComp1RunHr | 1.3.6.1.4.1.476.1.42.3.4.6.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of compressor 1. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsComp2RunHr | 1.3.6.1.4.1.476.1.42.3.4.6.2 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of compressor 2. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsFanRunHr | 1.3.6.1.4.1.476.1.42.3.4.6.3 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of the main fan. This value may be duplicated in the 'lgpEnvOperationalTimeTable'. | |||||||||||||||||||||
| SlgpEnvStatisticsHumRunHr | 1.3.6.1.4.1.476.1.42.3.4.6.4 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of the humidifier. This value may be duplicated in the 'lgpEnvOperationalTimeTable'. | |||||||||||||||||||||
| SlgpEnvStatisticsReheat1RunHr | 1.3.6.1.4.1.476.1.42.3.4.6.7 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of reheat element 1. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsReheat2RunHr | 1.3.6.1.4.1.476.1.42.3.4.6.8 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of reheat element 2. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsReheat3RunHr | 1.3.6.1.4.1.476.1.42.3.4.6.9 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of reheat element 3. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsCoolingModeHrs | 1.3.6.1.4.1.476.1.42.3.4.6.10 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours while lgpEnvStateCooling is on(1). This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsHeatingModeHrs | 1.3.6.1.4.1.476.1.42.3.4.6.11 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours while lgpEnvStateHeating is on(1). This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsHumidifyModeHrs | 1.3.6.1.4.1.476.1.42.3.4.6.12 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of the humidifying process of the system. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsDehumidifyModeHrs | 1.3.6.1.4.1.476.1.42.3.4.6.13 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of the dehumidifying process of the system. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsHotGasRunHr | 1.3.6.1.4.1.476.1.42.3.4.6.14 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of the hot gas system. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsHotWaterRunHr | 1.3.6.1.4.1.476.1.42.3.4.6.15 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of the hot water system. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsFreeCoolRunHr | 1.3.6.1.4.1.476.1.42.3.4.6.16 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of the free cooling process. This value may be duplicated in the 'lgpEnvOperationalTimeTable'.
| |||||||||||||||||||||
| SlgpEnvStatisticsComp3RunHr | 1.3.6.1.4.1.476.1.42.3.4.6.17 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of compressor 3. | |||||||||||||||||||||
| SlgpEnvStatisticsComp4RunHr | 1.3.6.1.4.1.476.1.42.3.4.6.18 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Accumulated run hours of compressor 4. | |||||||||||||||||||||
| NlgpEnvPoints | 1.3.6.1.4.1.476.1.42.3.4.7 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert environmental point object identifiers. | |||||||||||||||||||||
| NlgpEnvWellKnownPoints | 1.3.6.1.4.1.476.1.42.3.4.7.1 | ||||||||||||||||||||
node · current This sub-tree registers well known Liebert Environmental Points. The object identifier names usually encompass a process, or location, where measurements are recorded or where values are applied. | |||||||||||||||||||||
| NlgpEnvFanPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.1 | ||||||||||||||||||||
node · current This identifier represents a well known fan measurement point. | |||||||||||||||||||||
| NlgpEnvCompressorPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.2 | ||||||||||||||||||||
node · current This identifier represents a well known compressor measurement point. | |||||||||||||||||||||
| NlgpEnvElectricHeaterPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.3 | ||||||||||||||||||||
node · current This identifier represents a well known electric heater measurement point. | |||||||||||||||||||||
| NlgpEnvChilledWaterPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.4 | ||||||||||||||||||||
node · current This identifier represents a well known chilled water measurement point. | |||||||||||||||||||||
| NlgpEnvHumidifierPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.5 | ||||||||||||||||||||
node · current This identifier represents a well known humidifier measurement point. | |||||||||||||||||||||
| NlgpEnvDehumidifierPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.6 | ||||||||||||||||||||
node · current This identifier represents a well known dehumidifier measurement point. | |||||||||||||||||||||
| NlgpEnvFreeCoolingPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.7 | ||||||||||||||||||||
node · current This identifier represents a well known free-cooling measurement process. | |||||||||||||||||||||
| NlgpEnvHotWaterPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.8 | ||||||||||||||||||||
node · current This identifier represents a well known hot water measurement point. | |||||||||||||||||||||
| NlgpEnvHotGasPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.9 | ||||||||||||||||||||
node · current This identifier represents a well known hot gas measurement point. | |||||||||||||||||||||
| NlgpEnvBatteryCabinetPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.10 | ||||||||||||||||||||
node · current This identifier represents a well known cabinet point.
To determine the cabinet being described in a multi-cabinet system,
this point implements two additional indexes. The first index
describes the module being supplied with battery power. The second
index identifies the number of the battery cabinet, which is
typically a sequential number.
Example: lgpPwrMeasBatteryCabinet.2.4
'lgpEnvBatteryCabinetPoint' = Point is a battery cabinet.
'.2' = Cabinet is in the second module.
'.4' = Cabinet number 4 | |||||||||||||||||||||
| NlgpEnvPumpPoints | 1.3.6.1.4.1.476.1.42.3.4.7.1.11 | ||||||||||||||||||||
node · current This sub-tree identifies well-known pumps in the system. | |||||||||||||||||||||
| NlgpEnvPump1Point | 1.3.6.1.4.1.476.1.42.3.4.7.1.11.1 | ||||||||||||||||||||
node · current This identifier represents pump 1. | |||||||||||||||||||||
| NlgpEnvPump2Point | 1.3.6.1.4.1.476.1.42.3.4.7.1.11.2 | ||||||||||||||||||||
node · current This identifier represents pump 2. | |||||||||||||||||||||
| NlgpEnvCompressorPoints | 1.3.6.1.4.1.476.1.42.3.4.7.1.12 | ||||||||||||||||||||
node · current This sub-tree identifies well-known compressors in the system. | |||||||||||||||||||||
| NlgpEnvCompressor1Point | 1.3.6.1.4.1.476.1.42.3.4.7.1.12.1 | ||||||||||||||||||||
node · current This identifier represents compressor 1. | |||||||||||||||||||||
| NlgpEnvCompressor1APoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.12.1.1 | ||||||||||||||||||||
node · current This identifier represents compressor 1A. | |||||||||||||||||||||
| NlgpEnvCompressor1BPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.12.1.2 | ||||||||||||||||||||
node · current This identifier represents compressor 1B. | |||||||||||||||||||||
| NlgpEnvCompressor2Point | 1.3.6.1.4.1.476.1.42.3.4.7.1.12.2 | ||||||||||||||||||||
node · current This identifier represents compressor 2. | |||||||||||||||||||||
| NlgpEnvCompressor2APoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.12.2.1 | ||||||||||||||||||||
node · current This identifier represents compressor 2A. | |||||||||||||||||||||
| NlgpEnvCompressor2BPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.12.2.2 | ||||||||||||||||||||
node · current This identifier represents compressor 2B. | |||||||||||||||||||||
| NlgpEnvValvePoints | 1.3.6.1.4.1.476.1.42.3.4.7.1.13 | ||||||||||||||||||||
node · current This sub-tree identifies well-known valves in the system. | |||||||||||||||||||||
| NlgpEnvHotGasValve1Point | 1.3.6.1.4.1.476.1.42.3.4.7.1.13.1 | ||||||||||||||||||||
node · current This identifier represents hot gas valve 1. | |||||||||||||||||||||
| NlgpEnvHotGasValve2Point | 1.3.6.1.4.1.476.1.42.3.4.7.1.13.2 | ||||||||||||||||||||
node · current This identifier represents hot gas valve 2. | |||||||||||||||||||||
| NlgpEnvRemoteSensorStatisticPoints | 1.3.6.1.4.1.476.1.42.3.4.7.1.14 | ||||||||||||||||||||
node · current This sub-tree identifies well-known remote sensor statistics in the system. | |||||||||||||||||||||
| NlgpEnvRemoteSensorMinimumPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.14.1 | ||||||||||||||||||||
node · current This identifier represents the minimum value for remote sensor readings. | |||||||||||||||||||||
| NlgpEnvRemoteSensorMaximumPoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.14.2 | ||||||||||||||||||||
node · current This identifier represents the maximum value for remote sensor readings. | |||||||||||||||||||||
| NlgpEnvRemoteSensorAveragePoint | 1.3.6.1.4.1.476.1.42.3.4.7.1.14.3 | ||||||||||||||||||||
node · current This identifier represents the average value for remote sensor readings. | |||||||||||||||||||||
| NlgpEnvUnits | 1.3.6.1.4.1.476.1.42.3.4.8 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert environmental unit object identifiers. | |||||||||||||||||||||
| NlgpEnvWellKnownUnits | 1.3.6.1.4.1.476.1.42.3.4.8.1 | ||||||||||||||||||||
node · current This sub-tree registers well known Liebert Environmental Units. The object identifier names usually encompass a process, or location, where measurements are recorded or where values are applied. | |||||||||||||||||||||
| NlgpEnvHours | 1.3.6.1.4.1.476.1.42.3.4.8.1.1 | ||||||||||||||||||||
node · current This identifier represents well known time unit of hours. | |||||||||||||||||||||
| NlgpEnvRemoteSensors | 1.3.6.1.4.1.476.1.42.3.4.9 | ||||||||||||||||||||
node · current This sub-tree is used to register Liebert environmental remote sensor object identifiers. | |||||||||||||||||||||
| SlgpEnvRemoteSensorCalc | 1.3.6.1.4.1.476.1.42.3.4.9.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Calculation method applied to temperature readings from the remote sensors to determine a single temperature measurement value for cooling and heating control.
| |||||||||||||||||||||
| TlgpEnvRemoteSensorTable | 1.3.6.1.4.1.476.1.42.3.4.9.10 | NA | |||||||||||||||||||
table · not-accessible · current This table contains a list of remote sensors attached to the environmental unit. The table contains zero, one, or more rows, depending upon the number of sensors attached to the unit. | |||||||||||||||||||||
| RlgpEnvRemoteSensorEntry | 1.3.6.1.4.1.476.1.42.3.4.9.10.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry defines the attributes to be populated in the various columns of the 'lgpEnvRemoteSensorTable'. | |||||||||||||||||||||
| ClgpEnvRemoteSensorIndex | 1.3.6.1.4.1.476.1.42.3.4.9.10.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This is the index indicating the nth element of the table. | |||||||||||||||||||||
| ClgpEnvRemoteSensorId | 1.3.6.1.4.1.476.1.42.3.4.9.10.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This is the sensor number identifying the sensor. | |||||||||||||||||||||
| ClgpEnvRemoteSensorMode | 1.3.6.1.4.1.476.1.42.3.4.9.10.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Function assigned to remote sensor. When set to control(2) the sensor will be used in calculation of remote sensor temperature which may be used for heating and cooling control. When set to disable(0) the remote sensor reading is not available. When set to reference(1) the remote sensor reading is available but not used for control.
| |||||||||||||||||||||
| ClgpEnvRemoteSensorUsrLabel | 1.3.6.1.4.1.476.1.42.3.4.9.10.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User assigned remote sensor label. | |||||||||||||||||||||
| ClgpEnvRemoteSensorTempMeasurementDegF | 1.3.6.1.4.1.476.1.42.3.4.9.10.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Temperature measured at the temperature sensor reported in degrees Fahrenheit.
| |||||||||||||||||||||
| ClgpEnvRemoteSensorTempMeasurementDegC | 1.3.6.1.4.1.476.1.42.3.4.9.10.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Temperature measured at the temperature sensor reported in degrees Celsius.
| |||||||||||||||||||||