LANTRONIX-SLC-MIB
LantronixMIB module for managing Lantronix Secure Console Managers and Advanced Console Managers
snmptranslate -m LANTRONIX-SLC-MIB -Tpsnmpwalk -v2c -c <community> -m LANTRONIX-SLC-MIB <host> 1.3.6.1.4.1.244.1.1Imports
| IPV6-TC | Ipv6Address |
|---|---|
| LANTRONIX-MIB | products |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Islc | 1.3.6.1.4.1.244.1.1 | ||||||||||||||||||||
identity MIB module for managing Lantronix Secure Console Managers and Advanced Console Managers | |||||||||||||||||||||
| NslcEvents | 1.3.6.1.4.1.244.1.1.0 | ||||||||||||||||||||
| !slcEventPowerSupply | 1.3.6.1.4.1.244.1.1.0.1 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when a power supply fails or is restored.
| |||||||||||||||||||||
| !slcEventSysadminPassword | 1.3.6.1.4.1.244.1.1.0.2 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the sysadmin user password is changed. | |||||||||||||||||||||
| !slcEventSLCShutdown | 1.3.6.1.4.1.244.1.1.0.3 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the SLC is shutdown. | |||||||||||||||||||||
| !slcEventDevicePortData | 1.3.6.1.4.1.244.1.1.0.4 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when data is received on a Device Port, and the Device Port has been configured to generate a trap when a specified number of bytes (slcDevPortNumBytes) or a specified sequence of bytes (slcDevPortCfgEmailTextString) is received. slcDevPortData is the actual data received. | |||||||||||||||||||||
| !slcEventDevicePortSLMData | 1.3.6.1.4.1.244.1.1.0.5 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when data is received on a Device Port, and the Device Port has been configured to generate a trap designated for the Secure Lantronix Management Appliance (SLM) when a specified number of bytes is received or a specified time frame is passed. This trap is only sent to the SLM. | |||||||||||||||||||||
| !slcEventDevicePortSLMConfig | 1.3.6.1.4.1.244.1.1.0.6 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the SLM logging configuration is changed for a Device Port, and the Device Port has been configured to generate a trap designated for the Secure Lantronix Management Appliance (SLM). This trap specifies the new SLM logging configuration for the Device Port, and is only sent to the SLM. | |||||||||||||||||||||
| !slcEventDevicePortDeviceLowTemp | 1.3.6.1.4.1.244.1.1.0.7 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the low temperature limit for a sensor connected to a Device Port is exceeded. | |||||||||||||||||||||
| !slcEventDevicePortDeviceHighTemp | 1.3.6.1.4.1.244.1.1.0.8 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the high temperature limit for a sensor connected to a Device Port is exceeded. | |||||||||||||||||||||
| !slcEventDevicePortDeviceLowHumidity | 1.3.6.1.4.1.244.1.1.0.9 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the low humidity limit for a sensor connected to a Device Port is exceeded. | |||||||||||||||||||||
| !slcEventDevicePortDeviceHighHumidity | 1.3.6.1.4.1.244.1.1.0.10 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the high humidity limit for a sensor connected to a Device Port is exceeded. | |||||||||||||||||||||
| !slcEventDevicePortDeviceError | 1.3.6.1.4.1.244.1.1.0.11 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when an error occurs on a device connected to a Device Port. | |||||||||||||||||||||
| !slcEventPCCardAction | 1.3.6.1.4.1.244.1.1.0.12 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when an event occurs on one of the PC Card slots.
| |||||||||||||||||||||
| !slcEventSLCInternalTemp | 1.3.6.1.4.1.244.1.1.0.13 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the internal temperature of the SLC is outside of the acceptable operating range.
| |||||||||||||||||||||
| !slcEventUSBAction | 1.3.6.1.4.1.244.1.1.0.14 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when an event occurs on one of the USB Ports.
| |||||||||||||||||||||
| !slcEventDevicePortError | 1.3.6.1.4.1.244.1.1.0.15 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when an error occurs on a a Device Port, or across all Device Ports. If an error occurs across all Device Ports, slcDevPortId will be 1 (one).
| |||||||||||||||||||||
| !slcEventSDCardAction | 1.3.6.1.4.1.244.1.1.0.16 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when an event occurs on the SD Card slot.
| |||||||||||||||||||||
| !slcEventNoDialToneAlarm | 1.3.6.1.4.1.244.1.1.0.17 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when an event indicates that a no-dial-tone condition on the internal modem exists. | |||||||||||||||||||||
| !slcEventRPMAction | 1.3.6.1.4.1.244.1.1.0.18 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when an event occurs on one of the Remote Power Manager (UPS or PDU) devices.
| |||||||||||||||||||||
| !slcEventPingHostFails | 1.3.6.1.4.1.244.1.1.0.19 | ||||||||||||||||||||
notification · current The SNMP trap that is generated when the SLC is monitoring a host with regular pings and the SLC is unable to ping the host. The trap includes either the name or the IP address of the failed host.
| |||||||||||||||||||||
| NslcNetwork | 1.3.6.1.4.1.244.1.1.1 | ||||||||||||||||||||
| NslcNetEth | 1.3.6.1.4.1.244.1.1.1.1 | ||||||||||||||||||||
| SslcNetEthIfNumber | 1.3.6.1.4.1.244.1.1.1.1.1 | Integer32 (1..2) | RO | ||||||||||||||||||
scalar · Integer32 (1..2) · read-only · current The number of entries in the Ethernet interface table. | |||||||||||||||||||||
| TslcNetEthIfTable | 1.3.6.1.4.1.244.1.1.1.1.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of Ethernet network entries. The number of entries is given by the value of slcNetEthIfNumber. | |||||||||||||||||||||
| RslcNetEthIfEntry | 1.3.6.1.4.1.244.1.1.1.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry with the attributes for each Ethernet interface. Ethernet Port Eth1 is always index 1, and Eth2 is always index 2.
| |||||||||||||||||||||
| CslcNetEthIfIndex | 1.3.6.1.4.1.244.1.1.1.1.2.1.1 | Integer32 (1..2) | RO | ||||||||||||||||||
column · Integer32 (1..2) · read-only · current Reference index for each Ethernet interface. | |||||||||||||||||||||
| CslcNetEthIfSource | 1.3.6.1.4.1.244.1.1.1.1.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The state/source for the IP Address and subnet mask for the Ethernet interface.
| |||||||||||||||||||||
| CslcNetEthIfMode | 1.3.6.1.4.1.244.1.1.1.1.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The speed and duplex for the Ethernet interface.
| |||||||||||||||||||||
| CslcNetEthIfIPv6Addr | 1.3.6.1.4.1.244.1.1.1.1.2.1.4 | Ipv6Address | RO | ||||||||||||||||||
column · Ipv6Address · read-only · current The IPv6 Address for each Ethernet interface. | |||||||||||||||||||||
| CslcNetEthIfIPv6PrefixLength | 1.3.6.1.4.1.244.1.1.1.1.2.1.5 | INTEGER (0..128) | NA | ||||||||||||||||||
column · INTEGER (0..128) · not-accessible · current The length of the prefix for slcNetEthIfIPv6Addr (in bits). | |||||||||||||||||||||
| CslcNetEthIfMTU | 1.3.6.1.4.1.244.1.1.1.1.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The Maximum Transmission Unit for the Ethernet interface. | |||||||||||||||||||||
| CslcNetEthIfMacAddress | 1.3.6.1.4.1.244.1.1.1.1.2.1.7 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The MAC Address for the Ethernet interface. | |||||||||||||||||||||
| SslcNetEthGateway | 1.3.6.1.4.1.244.1.1.1.1.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The gateway for routing non-Eth1 and non-Eth2 network IPv4 traffic. | |||||||||||||||||||||
| SslcNetEthGatewayPrecedence | 1.3.6.1.4.1.244.1.1.1.1.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The gateway to give precedence to, if both a static gateway is set, and a gateway is acquired via DHCP or a GPRS Modem.
| |||||||||||||||||||||
| SslcNetEthKeepaliveStartProbes | 1.3.6.1.4.1.244.1.1.1.1.5 | Integer32 (1..99999) | RO | ||||||||||||||||||
scalar · Integer32 (1..99999) · read-only · current TCP keepalive timer: number of seconds to wait before sending out the initial probe. | |||||||||||||||||||||
| SslcNetEthKeepaliveNumberOfProbes | 1.3.6.1.4.1.244.1.1.1.1.6 | Integer32 (1..20) | RO | ||||||||||||||||||
scalar · Integer32 (1..20) · read-only · current TCP keepalive timer: number of probes to send out after the initial probe. | |||||||||||||||||||||
| SslcNetEthKeepaliveInterval | 1.3.6.1.4.1.244.1.1.1.1.7 | Integer32 (1..9999) | RO | ||||||||||||||||||
scalar · Integer32 (1..9999) · read-only · current TCP keepalive timer: number of seconds between probes. | |||||||||||||||||||||
| SslcNetEthIPForwarding | 1.3.6.1.4.1.244.1.1.1.1.8 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, IP forwarding is used. | |||||||||||||||||||||
| SslcNetEthDNS1 | 1.3.6.1.4.1.244.1.1.1.1.9 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of DNS server #1. | |||||||||||||||||||||
| SslcNetEthDNS2 | 1.3.6.1.4.1.244.1.1.1.1.10 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of DNS server #2. | |||||||||||||||||||||
| SslcNetEthDNS3 | 1.3.6.1.4.1.244.1.1.1.1.11 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of DNS server #3. | |||||||||||||||||||||
| SslcNetEthDomain | 1.3.6.1.4.1.244.1.1.1.1.12 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The SLC domain name. | |||||||||||||||||||||
| SslcNetEthAlternateGateway | 1.3.6.1.4.1.244.1.1.1.1.13 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The alternate gateway for routing non-Eth1 and non-Eth2 network traffic. The alternate gateway is used if an IP Address usually accessible through the default gateway fails to return one or more pings. | |||||||||||||||||||||
| SslcNetEthPingIPAddress | 1.3.6.1.4.1.244.1.1.1.1.14 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address to ping to determine if the alternate gateway should be used. | |||||||||||||||||||||
| SslcNetEthPingInterface | 1.3.6.1.4.1.244.1.1.1.1.15 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The Ethernet interface used to determine if the alternate gateway should be used.
| |||||||||||||||||||||
| SslcNetEthPingDelay | 1.3.6.1.4.1.244.1.1.1.1.16 | Integer32 (1..250) | RO | ||||||||||||||||||
scalar · Integer32 (1..250) · read-only · current The delay, in seconds, between pings used to determine if the alternate gateway should be used.
| |||||||||||||||||||||
| SslcNetEthPingFailed | 1.3.6.1.4.1.244.1.1.1.1.17 | Integer32 (1..250) | RO | ||||||||||||||||||
scalar · Integer32 (1..250) · read-only · current The number of pings with no response required for the alternate gateway to be used. | |||||||||||||||||||||
| SslcNetEthBonding | 1.3.6.1.4.1.244.1.1.1.1.18 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The Ethernet network redundancy/load balancing setting.
| |||||||||||||||||||||
| SslcNetEthIPv6 | 1.3.6.1.4.1.244.1.1.1.1.19 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, IPv6 is enabled. | |||||||||||||||||||||
| SslcNetEthGatewayIPv6 | 1.3.6.1.4.1.244.1.1.1.1.20 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The default gateway for routing non-Eth1 and non-Eth2 IPv6 network traffic. | |||||||||||||||||||||
| SslcNetEthDNS1IPv6 | 1.3.6.1.4.1.244.1.1.1.1.21 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of DNS server #1. | |||||||||||||||||||||
| SslcNetEthDNS2IPv6 | 1.3.6.1.4.1.244.1.1.1.1.22 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of DNS server #2. | |||||||||||||||||||||
| SslcNetEthDNS3IPv6 | 1.3.6.1.4.1.244.1.1.1.1.23 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of DNS server #3. | |||||||||||||||||||||
| SslcNetEthPreferIPv4DNS | 1.3.6.1.4.1.244.1.1.1.1.24 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, IPv4 DNS records will be preferred when DNS hostname lookups are performed. Otherwise IPv6 records will be preferred (when IPv6 is enabled). | |||||||||||||||||||||
| NslcNetFirewall | 1.3.6.1.4.1.244.1.1.1.2 | ||||||||||||||||||||
| SslcNetFirewallState | 1.3.6.1.4.1.244.1.1.1.2.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, network traffic is filtered. | |||||||||||||||||||||
| SslcNetFirewallReject | 1.3.6.1.4.1.244.1.1.1.2.2 | INTEGER | RO | obsolete | |||||||||||||||||
scalar · INTEGER · read-only · obsolete If enabled, returns a 'connection denied' message on blocked ports. If disabled, ignores attempts to connect to a blocked port. This object is deprecated.
| |||||||||||||||||||||
| SslcNetFirewallPing | 1.3.6.1.4.1.244.1.1.1.2.3 | EnabledState | RO | obsolete | |||||||||||||||||
scalar · EnabledState · read-only · obsolete If enabled, the SLC is invisible to pings. This object is deprecated. | |||||||||||||||||||||
| SslcNetFirewallSSH | 1.3.6.1.4.1.244.1.1.1.2.4 | EnabledState | RO | obsolete | |||||||||||||||||
scalar · EnabledState · read-only · obsolete If enabled, the SSH port is open. If disabled, the SSH port is blocked to network traffic. This object is deprecated. | |||||||||||||||||||||
| SslcNetFirewallTelnet | 1.3.6.1.4.1.244.1.1.1.2.5 | EnabledState | RO | obsolete | |||||||||||||||||
scalar · EnabledState · read-only · obsolete If enabled, the Telnet port is open. If disabled, the Telnet port is blocked to network traffic. This object is deprecated. | |||||||||||||||||||||
| SslcNetFirewallHTTP | 1.3.6.1.4.1.244.1.1.1.2.6 | EnabledState | RO | obsolete | |||||||||||||||||
scalar · EnabledState · read-only · obsolete If enabled, the HTTP port is open. If disabled, the HTTP port is blocked to network traffic. This object is deprecated. | |||||||||||||||||||||
| SslcNetFirewallHTTPS | 1.3.6.1.4.1.244.1.1.1.2.7 | EnabledState | RO | obsolete | |||||||||||||||||
scalar · EnabledState · read-only · obsolete If enabled, the HTTPS port is open. If disabled, the HTTPS port is blocked to network traffic. This object is deprecated. | |||||||||||||||||||||
| SslcNetFirewallSMBCIFS | 1.3.6.1.4.1.244.1.1.1.2.8 | EnabledState | RO | obsolete | |||||||||||||||||
scalar · EnabledState · read-only · obsolete If enabled, the SMBCIFS port is open. If disabled, the SMBCIFS port is blocked to network traffic. This object is deprecated. | |||||||||||||||||||||
| SslcNetFirewallRulesetNumber | 1.3.6.1.4.1.244.1.1.1.2.9 | Integer32 (0..64) | RO | ||||||||||||||||||
scalar · Integer32 (0..64) · read-only · current The number of entries in the IP Filter Ruleset table. | |||||||||||||||||||||
| TslcNetFirewallRulesetTable | 1.3.6.1.4.1.244.1.1.1.2.10 | NA | |||||||||||||||||||
table · not-accessible · current Table of IP Filter Rulesets. The number of entries is given by the value of slcNetFirewallRulesetNumber. | |||||||||||||||||||||
| RslcNetFirewallRulesetEntry | 1.3.6.1.4.1.244.1.1.1.2.10.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry with all the attributes, including the rules, for an IP Filter Ruleset. | |||||||||||||||||||||
| CslcNetFirewallRulesetIndex | 1.3.6.1.4.1.244.1.1.1.2.10.1.1 | Integer32 (1..64) | RO | ||||||||||||||||||
column · Integer32 (1..64) · read-only · current Reference index for each IP Filter Ruleset. | |||||||||||||||||||||
| CslcNetFirewallRulesetName | 1.3.6.1.4.1.244.1.1.1.2.10.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The name assigned to the IP Filter Ruleset. | |||||||||||||||||||||
| CslcNetFirewallRulesetNumRules | 1.3.6.1.4.1.244.1.1.1.2.10.1.3 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current The number of rules in the slcNetFirewallRulesetRules string. | |||||||||||||||||||||
| CslcNetFirewallRulesetRules | 1.3.6.1.4.1.244.1.1.1.2.10.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The IP Filter rules that are defined for the Ruleset. The rule format is <IP>/<Mask Bits>;<Protocol>;<Ports>;<Action> and rules are separated by a colon. If the string is truncated because of system limitations, the string will be terminated with two colons. | |||||||||||||||||||||
| SslcNetFirewallMappingNumber | 1.3.6.1.4.1.244.1.1.1.2.11 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of entries in the IP Filter Mapping table. | |||||||||||||||||||||
| TslcNetFirewallMappingTable | 1.3.6.1.4.1.244.1.1.1.2.12 | NA | |||||||||||||||||||
table · not-accessible · current Table of mappings between IP Filter Rulesets and interfaces. The number of entries is given by the value of slcNetFirewallMappingNumber. | |||||||||||||||||||||
| RslcNetFirewallMappingEntry | 1.3.6.1.4.1.244.1.1.1.2.12.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry defining an interface that has an IP Filter Ruleset assigned to it. The interface can be either an Ethernet interface or a PC Card or Device Port modem. | |||||||||||||||||||||
| CslcNetFirewallMappingIndex | 1.3.6.1.4.1.244.1.1.1.2.12.1.1 | Integer32 (1..64) | RO | ||||||||||||||||||
column · Integer32 (1..64) · read-only · current Reference index for each IP Filter mapping. | |||||||||||||||||||||
| CslcNetFirewallMappingIfac | 1.3.6.1.4.1.244.1.1.1.2.12.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The interface which has an IP Filter Ruleset assigned to it. If the interface is devicePort or usbPort, slcNetFirewallMappingIfacId defines which Device Port or USB Port (with an attached modem) the Ruleset is assigned to.
| |||||||||||||||||||||
| CslcNetFirewallMappingIfacId | 1.3.6.1.4.1.244.1.1.1.2.12.1.3 | Integer32 (0..48) | RO | ||||||||||||||||||
column · Integer32 (0..48) · read-only · current The identifier for a Device Port if slcNetFirewallMappingIfac equals devicePort(5), or the identifier for a USB Port if slcNetFirewallMappingIfac equals usbPort. Otherwise equals zero. | |||||||||||||||||||||
| CslcNetFirewallMappingRuleset | 1.3.6.1.4.1.244.1.1.1.2.12.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The name of the IP Filter Ruleset assigned to the interface. | |||||||||||||||||||||
| NslcNetRouting | 1.3.6.1.4.1.244.1.1.1.3 | ||||||||||||||||||||
| SslcNetRouteRIPState | 1.3.6.1.4.1.244.1.1.1.3.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the Routing Information Protocol (RIP) is used. | |||||||||||||||||||||
| SslcNetRouteRIPVersion | 1.3.6.1.4.1.244.1.1.1.3.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The version of RIP being used.
| |||||||||||||||||||||
| SslcNetRouteStaticState | 1.3.6.1.4.1.244.1.1.1.3.3 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, static routing is used. | |||||||||||||||||||||
| SslcNetRouteStaticNumber | 1.3.6.1.4.1.244.1.1.1.3.4 | Integer32 (0..64) | RO | ||||||||||||||||||
scalar · Integer32 (0..64) · read-only · current The number of entries in the Static Routes table. | |||||||||||||||||||||
| TslcNetRouteStaticTable | 1.3.6.1.4.1.244.1.1.1.3.5 | NA | |||||||||||||||||||
table · not-accessible · current Table of static route entries. The number of entries is given by the value of slcNetRouteStaticNumber. | |||||||||||||||||||||
| RslcNetRouteStaticEntry | 1.3.6.1.4.1.244.1.1.1.3.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry with the IP Address, subnet mask, and gateway for a static route. | |||||||||||||||||||||
| CslcNetRouteStaticIndex | 1.3.6.1.4.1.244.1.1.1.3.5.1.1 | Integer32 (1..64) | RO | ||||||||||||||||||
column · Integer32 (1..64) · read-only · current Reference index for each static route. | |||||||||||||||||||||
| CslcNetRouteStaticIP | 1.3.6.1.4.1.244.1.1.1.3.5.1.2 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The IP Address for the static route. | |||||||||||||||||||||
| CslcNetRouteStaticMask | 1.3.6.1.4.1.244.1.1.1.3.5.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The subnet mask for the static route. | |||||||||||||||||||||
| CslcNetRouteStaticGateway | 1.3.6.1.4.1.244.1.1.1.3.5.1.4 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The gateway for the static route. | |||||||||||||||||||||
| NslcNetVPN | 1.3.6.1.4.1.244.1.1.1.4 | ||||||||||||||||||||
| SslcNetVPNTunnel | 1.3.6.1.4.1.244.1.1.1.4.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the SLC is configured to initiate a VPN tunnel. | |||||||||||||||||||||
| SslcNetVPNStatus | 1.3.6.1.4.1.244.1.1.1.4.2 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current A string giving the current status of the VPN tunnel. | |||||||||||||||||||||
| SslcNetVPNName | 1.3.6.1.4.1.244.1.1.1.4.3 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..20)) · read-only · current The name of the VPN tunnel. | |||||||||||||||||||||
| SslcNetVPNEthPort | 1.3.6.1.4.1.244.1.1.1.4.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The Ethernet interface used for the VPN tunnel.
| |||||||||||||||||||||
| SslcNetVPNRemoteHost | 1.3.6.1.4.1.244.1.1.1.4.5 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the host on the remote side of the tunnel. | |||||||||||||||||||||
| SslcNetVPNRemoteId | 1.3.6.1.4.1.244.1.1.1.4.6 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..20)) · read-only · current How the remote host should be identified for authentication. | |||||||||||||||||||||
| SslcNetVPNRemoteHop | 1.3.6.1.4.1.244.1.1.1.4.7 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current If the remote host is behind a gateway, this specifies the IP Address of the gateway's public network interface. | |||||||||||||||||||||
| SslcNetVPNRemoteSubnet | 1.3.6.1.4.1.244.1.1.1.4.8 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current One or more subnets behind the remote host, expressed in CIDR notation (IP Address/mask bits). Multiple subnets are separated by a comma. | |||||||||||||||||||||
| SslcNetVPNLocalId | 1.3.6.1.4.1.244.1.1.1.4.9 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..20)) · read-only · current How the SLC should be identified for authentication. | |||||||||||||||||||||
| SslcNetVPNLocalHop | 1.3.6.1.4.1.244.1.1.1.4.10 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current If the SLC is behind a gateway, this specifies the IP Address of the gateway's public network interface. | |||||||||||||||||||||
| SslcNetVPNLocalSubnet | 1.3.6.1.4.1.244.1.1.1.4.11 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current One or more subnets behind the SLC, expressed in CIDR notation (IP Address/mask bits). Multiple subnets are separated by a comma. | |||||||||||||||||||||
| SslcNetVPNIKENegotiation | 1.3.6.1.4.1.244.1.1.1.4.12 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of mode used by the SLC and the remote host for the IKE protocol, which exchanges security options between two hosts which want to communicate via IPSec.
| |||||||||||||||||||||
| SslcNetVPNIKEEncryption | 1.3.6.1.4.1.244.1.1.1.4.13 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of encryption used for IKE negotiation.
| |||||||||||||||||||||
| SslcNetVPNIKEAuthentication | 1.3.6.1.4.1.244.1.1.1.4.14 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of authentication used for IKE negotiation.
| |||||||||||||||||||||
| SslcNetVPNIKEDHGroup | 1.3.6.1.4.1.244.1.1.1.4.15 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of Diffie-Hellman Group used for IKE negotiation.
| |||||||||||||||||||||
| SslcNetVPNESPEncryption | 1.3.6.1.4.1.244.1.1.1.4.16 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of encryption used for encrypting data sent through the tunnel.
| |||||||||||||||||||||
| SslcNetVPNESPAuthentication | 1.3.6.1.4.1.244.1.1.1.4.17 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of authentication used for authenticating data sent through the VPN tunnel.
| |||||||||||||||||||||
| SslcNetVPNESPDHGroup | 1.3.6.1.4.1.244.1.1.1.4.18 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of Diffie-Hellman Group used for the key exchange for data sent through the tunnel.
| |||||||||||||||||||||
| SslcNetVPNAuthentication | 1.3.6.1.4.1.244.1.1.1.4.19 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of authentication used by the host on each side of the tunnel to verify the identify of the other host.
| |||||||||||||||||||||
| SslcNetVPNPerfectForwardSecrecy | 1.3.6.1.4.1.244.1.1.1.4.20 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current When a new IPSec SA is negotiated after the IPSec SA lifetime expires, a new Diffie-Hellman key exchange can be performed to generate a new session key to be used to encrypt the data being sent through the tunnel. If this is enabled, it provides greater security, since the old session keys are destroyed. | |||||||||||||||||||||
| SslcNetVPNModeConfigClient | 1.3.6.1.4.1.244.1.1.1.4.21 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If this is enabled, the SLC can receive network configuration from the remote host. This allows the remote host to assign an IP address/netmask to the SLC side of the VPN tunnel. | |||||||||||||||||||||
| SslcNetVPNXAUTHClient | 1.3.6.1.4.1.244.1.1.1.4.22 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If this is enabled, the SLC will send authentication credentials to the remote host if they are requested. XAUTH, or Extended Authentication, can be used as an additional security measure on top of the Pre-Shared Key or RSA Public Key. | |||||||||||||||||||||
| SslcNetVPNXAUTHClientLogin | 1.3.6.1.4.1.244.1.1.1.4.23 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current If slcNetVPNXAUTHClientLogin is enabled, this is the login used for authentication. | |||||||||||||||||||||
| NslcNetSecurity | 1.3.6.1.4.1.244.1.1.1.5 | ||||||||||||||||||||
| SslcNetSecurityFIPSMode | 1.3.6.1.4.1.244.1.1.1.5.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the SLC is running in FIPS mode. | |||||||||||||||||||||
| NslcServices | 1.3.6.1.4.1.244.1.1.2 | ||||||||||||||||||||
| NslcServNTP | 1.3.6.1.4.1.244.1.1.2.1 | ||||||||||||||||||||
| SslcServNTPState | 1.3.6.1.4.1.244.1.1.2.1.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, NTP is used to synchronize SLC time with a network time server. | |||||||||||||||||||||
| SslcServNTPSynchronize | 1.3.6.1.4.1.244.1.1.2.1.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The method used by the SLC to synchronize time: receive broadcasts from the NTP server, or poll the NTP server.
| |||||||||||||||||||||
| SslcServNTPPoll | 1.3.6.1.4.1.244.1.1.2.1.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current If slcServNTPSynchronize is set to poll, indicates whether a local server or a public server is used as the NTP server.
| |||||||||||||||||||||
| SslcServNTPServer | 1.3.6.1.4.1.244.1.1.2.1.4 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the local or public NTP server. | |||||||||||||||||||||
| SslcServNTPLocalServer2 | 1.3.6.1.4.1.244.1.1.2.1.5 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the 2nd local NTP server. | |||||||||||||||||||||
| SslcServNTPLocalServer3 | 1.3.6.1.4.1.244.1.1.2.1.6 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the 3rd local NTP server. | |||||||||||||||||||||
| SslcServNTPServerIPv6 | 1.3.6.1.4.1.244.1.1.2.1.7 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the local NTP server. | |||||||||||||||||||||
| SslcServNTPLocalServer2IPv6 | 1.3.6.1.4.1.244.1.1.2.1.8 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the 2nd local NTP server. | |||||||||||||||||||||
| SslcServNTPLocalServer3IPv6 | 1.3.6.1.4.1.244.1.1.2.1.9 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the 3rd local NTP server. | |||||||||||||||||||||
| NslcServSyslog | 1.3.6.1.4.1.244.1.1.2.2 | ||||||||||||||||||||
| SslcServSysNetworkLevel | 1.3.6.1.4.1.244.1.1.2.2.1 | SyslogLevel | RO | ||||||||||||||||||
scalar · SyslogLevel · read-only · current The logging level for Network messages. | |||||||||||||||||||||
| SslcServSysServicesLevel | 1.3.6.1.4.1.244.1.1.2.2.2 | SyslogLevel | RO | ||||||||||||||||||
scalar · SyslogLevel · read-only · current The logging level for Services messages. | |||||||||||||||||||||
| SslcServSysAuthLevel | 1.3.6.1.4.1.244.1.1.2.2.3 | SyslogLevel | RO | ||||||||||||||||||
scalar · SyslogLevel · read-only · current The logging level for Authentication messages. | |||||||||||||||||||||
| SslcServSysDevPortLevel | 1.3.6.1.4.1.244.1.1.2.2.4 | SyslogLevel | RO | ||||||||||||||||||
scalar · SyslogLevel · read-only · current The logging level for Device Port messages. | |||||||||||||||||||||
| SslcServSysDiagLevel | 1.3.6.1.4.1.244.1.1.2.2.5 | SyslogLevel | RO | ||||||||||||||||||
scalar · SyslogLevel · read-only · current The logging level for Diagnostic messages. | |||||||||||||||||||||
| SslcServSysGeneralLevel | 1.3.6.1.4.1.244.1.1.2.2.6 | SyslogLevel | RO | ||||||||||||||||||
scalar · SyslogLevel · read-only · current The logging level for General system messages. | |||||||||||||||||||||
| SslcServSysRemoteServer | 1.3.6.1.4.1.244.1.1.2.2.7 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the remote Syslog Server. | |||||||||||||||||||||
| SslcServSysRemoteServer2 | 1.3.6.1.4.1.244.1.1.2.2.8 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the secondary remote Syslog Server. | |||||||||||||||||||||
| SslcServSysRemoteServerIPv6 | 1.3.6.1.4.1.244.1.1.2.2.9 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the remote Syslog Server. | |||||||||||||||||||||
| SslcServSysRemoteServer2IPv6 | 1.3.6.1.4.1.244.1.1.2.2.10 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the secondary remote Syslog Server. | |||||||||||||||||||||
| SslcServSysRPMLogSize | 1.3.6.1.4.1.244.1.1.2.2.11 | Integer32 (5..40) | RO | ||||||||||||||||||
scalar · Integer32 (5..40) · read-only · current The maximum size in Kilobytes that RPM logs can grow to before they are pruned. When the file is pruned, it will be pruned to 50% of the RPM Log Size.
| |||||||||||||||||||||
| SslcServSysOtherLogSize | 1.3.6.1.4.1.244.1.1.2.2.12 | Integer32 (5..40) | RO | ||||||||||||||||||
scalar · Integer32 (5..40) · read-only · current The maximum size in Kilobytes that all logs other than RPM logs can grow to before they are pruned. When the file is pruned, it will be pruned to 50% of the RPM Log Size.
| |||||||||||||||||||||
| NslcServAuditLog | 1.3.6.1.4.1.244.1.1.2.3 | ||||||||||||||||||||
| SslcServAuditState | 1.3.6.1.4.1.244.1.1.2.3.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, logs all configuration changes to an audit log. | |||||||||||||||||||||
| SslcServAuditSize | 1.3.6.1.4.1.244.1.1.2.3.2 | Integer32 (5..500) | RO | ||||||||||||||||||
scalar · Integer32 (5..500) · read-only · current The maximum size of the audit login in Kilobytes.
| |||||||||||||||||||||
| SslcServAuditIncludeCLI | 1.3.6.1.4.1.244.1.1.2.3.3 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, all CLI commands are included in the audit log in addition to a description of the configuration change. | |||||||||||||||||||||
| SslcServAuditInSystemLog | 1.3.6.1.4.1.244.1.1.2.3.4 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, all audit log entries are also sent to the system log. | |||||||||||||||||||||
| NslcServSSH | 1.3.6.1.4.1.244.1.1.2.4 | ||||||||||||||||||||
| SslcServSSHState | 1.3.6.1.4.1.244.1.1.2.4.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, allows logins to the SLC CLI via SSH. | |||||||||||||||||||||
| SslcServSSHTimeout | 1.3.6.1.4.1.244.1.1.2.4.2 | Integer32 (0..30) | RO | ||||||||||||||||||
scalar · Integer32 (0..30) · read-only · current The timeout (in minutes) for SSH connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| SslcServSSHWebSSH | 1.3.6.1.4.1.244.1.1.2.4.3 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, allows Web SSH access to the CLI and the Device Ports. | |||||||||||||||||||||
| SslcServSSHPort | 1.3.6.1.4.1.244.1.1.2.4.4 | Integer32 (0..65535) | RO | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-only · current The TCP Port number for incoming SSH sessions to the SLC CLI. | |||||||||||||||||||||
| SslcServSSHV1Incoming | 1.3.6.1.4.1.244.1.1.2.4.5 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, incoming SSH version 1 connections are allowed. | |||||||||||||||||||||
| SslcServSSHTimeoutDataDirection | 1.3.6.1.4.1.244.1.1.2.4.6 | TimeoutDataDirection | RO | ||||||||||||||||||
scalar · TimeoutDataDirection · read-only · current If slcServSSHTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out. | |||||||||||||||||||||
| SslcServSSHDSAKeys | 1.3.6.1.4.1.244.1.1.2.4.7 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, SSH will support DSA keys for incoming and outgoing connections. | |||||||||||||||||||||
| NslcServTelnet | 1.3.6.1.4.1.244.1.1.2.5 | ||||||||||||||||||||
| SslcServTelnetState | 1.3.6.1.4.1.244.1.1.2.5.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, allows logins to the SLC CLI via Telnet. | |||||||||||||||||||||
| SslcServTelnetTimeout | 1.3.6.1.4.1.244.1.1.2.5.2 | Integer32 (0..30) | RO | ||||||||||||||||||
scalar · Integer32 (0..30) · read-only · current The timeout (in minutes) for Telnet connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| SslcServTelnetWebTelnet | 1.3.6.1.4.1.244.1.1.2.5.3 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, allows Web Telnet access to the CLI and the Device Ports. | |||||||||||||||||||||
| SslcServTelnetTelnetOut | 1.3.6.1.4.1.244.1.1.2.5.4 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, allows outgoing Telnet connections. | |||||||||||||||||||||
| SslcServTelnetTimeoutDataDirection | 1.3.6.1.4.1.244.1.1.2.5.5 | TimeoutDataDirection | RO | ||||||||||||||||||
scalar · TimeoutDataDirection · read-only · current If slcServTelnetTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out. | |||||||||||||||||||||
| NslcServSNMP | 1.3.6.1.4.1.244.1.1.2.6 | ||||||||||||||||||||
| SslcServSNMPState | 1.3.6.1.4.1.244.1.1.2.6.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current Enables the SNMP agent on the SLC. | |||||||||||||||||||||
| SslcServSNMPTraps | 1.3.6.1.4.1.244.1.1.2.6.2 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the SLC sends traps for key events. | |||||||||||||||||||||
| SslcServSNMPNMS | 1.3.6.1.4.1.244.1.1.2.6.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the Network Management System (NMS). | |||||||||||||||||||||
| SslcServSNMPLocation | 1.3.6.1.4.1.244.1.1.2.6.4 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The SNMP location for the SLC. | |||||||||||||||||||||
| SslcServSNMPContact | 1.3.6.1.4.1.244.1.1.2.6.5 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The SNMP contact for the SLC. | |||||||||||||||||||||
| SslcServSNMPv3User | 1.3.6.1.4.1.244.1.1.2.6.6 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-only · current The user name for read-only access to the SLC via SNMP v3. | |||||||||||||||||||||
| SslcServSNMPReadOnlyCommunity | 1.3.6.1.4.1.244.1.1.2.6.7 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The SNMP read-only community for SNMP versions 1 and 2. | |||||||||||||||||||||
| SslcServSNMPReadWriteCommunity | 1.3.6.1.4.1.244.1.1.2.6.8 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The SNMP read-write community for SNMP versions 1 and 2. | |||||||||||||||||||||
| SslcServSNMPTrapCommunity | 1.3.6.1.4.1.244.1.1.2.6.9 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The SNMP trap community for SNMP versions 1 and 2. | |||||||||||||||||||||
| SslcServSNMPAlarmDelay | 1.3.6.1.4.1.244.1.1.2.6.10 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The delay, in seconds, between traps that are sent out for alarm conditions. | |||||||||||||||||||||
| SslcServSNMPv3ReadWriteUser | 1.3.6.1.4.1.244.1.1.2.6.11 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-only · current The user name for read-write access to the SLC via SNMP v3. | |||||||||||||||||||||
| SslcServSNMPv3Security | 1.3.6.1.4.1.244.1.1.2.6.12 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The security model used for SNMP v3: insecure authentication and no packet encryption, secure authentication and no packet encryption, secure authentication and packet encryption.
| |||||||||||||||||||||
| SslcServSNMPv3Authentication | 1.3.6.1.4.1.244.1.1.2.6.13 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current When slcServSNMPv3Security is set to authNoEncrypt or authEncrypt, the type of authentication used.
| |||||||||||||||||||||
| SslcServSNMPv3Encryption | 1.3.6.1.4.1.244.1.1.2.6.14 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current When slcServSNMPv3Security is set to authEncrypt, the type of encryption used.
| |||||||||||||||||||||
| SslcServSNMPv1v2 | 1.3.6.1.4.1.244.1.1.2.6.15 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, SNMP version 1 and version 2 (which use the Read-Only and Read-Write Communities) is enabled. | |||||||||||||||||||||
| SslcServSNMPNMS2 | 1.3.6.1.4.1.244.1.1.2.6.16 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the 2nd Network Management System (NMS). | |||||||||||||||||||||
| SslcServSNMPNMSIPv6 | 1.3.6.1.4.1.244.1.1.2.6.17 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the Network Management System (NMS). | |||||||||||||||||||||
| SslcServSNMPNMS2IPv6 | 1.3.6.1.4.1.244.1.1.2.6.18 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the 2nd Network Management System (NMS). | |||||||||||||||||||||
| NslcServSMTP | 1.3.6.1.4.1.244.1.1.2.7 | ||||||||||||||||||||
| SslcServSMTPServer | 1.3.6.1.4.1.244.1.1.2.7.1 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the SMTP (email) server. | |||||||||||||||||||||
| SslcServSMTPSender | 1.3.6.1.4.1.244.1.1.2.7.2 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The sender's email address for emails sent from the SLC. | |||||||||||||||||||||
| NslcServNFS | 1.3.6.1.4.1.244.1.1.2.8 | ||||||||||||||||||||
| TslcServNFSMountTable | 1.3.6.1.4.1.244.1.1.2.8.1 | NA | |||||||||||||||||||
table · not-accessible · current Table of NFS Mounts. | |||||||||||||||||||||
| RslcServNFSMountEntry | 1.3.6.1.4.1.244.1.1.2.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing a NFS Mount and it's attributes.
| |||||||||||||||||||||
| CslcServNFSMountIndex | 1.3.6.1.4.1.244.1.1.2.8.1.1.1 | Integer32 (1..3) | RO | ||||||||||||||||||
column · Integer32 (1..3) · read-only · current Reference index for each NFS Mount. | |||||||||||||||||||||
| CslcServNFSMountRemoteDir | 1.3.6.1.4.1.244.1.1.2.8.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The remote directory of the NFS Mount, in the format <remote server>:/<remote directory>. | |||||||||||||||||||||
| CslcServNFSMountLocalDir | 1.3.6.1.4.1.244.1.1.2.8.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The directory in the SLC on which the remote directory is mounted. | |||||||||||||||||||||
| CslcServNFSMountReadWrite | 1.3.6.1.4.1.244.1.1.2.8.1.1.4 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the remote NFS directory is mounted read-write. If disabled, the remote NFS directory is mounted read-only. | |||||||||||||||||||||
| CslcServNFSMountMount | 1.3.6.1.4.1.244.1.1.2.8.1.1.5 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the remote NFS directory is configured to be mounted. If disabled, the remote NFS directory will not be mounted, or will be unmounted if is is mounted. | |||||||||||||||||||||
| NslcServCIFS | 1.3.6.1.4.1.244.1.1.2.9 | ||||||||||||||||||||
| SslcServCIFSState | 1.3.6.1.4.1.244.1.1.2.9.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the SLC exports a CIFS share containing system logs, Device Port logs, and saved SLC configurations. | |||||||||||||||||||||
| SslcServCIFSEth1 | 1.3.6.1.4.1.244.1.1.2.9.2 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the CIFS share is exported on the Eth1 interface. | |||||||||||||||||||||
| SslcServCIFSEth2 | 1.3.6.1.4.1.244.1.1.2.9.3 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the CIFS share is exported on the Eth2 interface. | |||||||||||||||||||||
| SslcServCIFSWorkgroup | 1.3.6.1.4.1.244.1.1.2.9.4 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..15)) · read-only · current The SMB/CIFS workgroup that the CIFS share is associated with. | |||||||||||||||||||||
| NslcServSLCNetwork | 1.3.6.1.4.1.244.1.1.2.10 | ||||||||||||||||||||
| SslcServSLCNetSearch | 1.3.6.1.4.1.244.1.1.2.10.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates how to search for SLCs on the network: by searching a list of manually entered IP Addresses, by broadcasting on the local subnet, or both.
| |||||||||||||||||||||
| SslcServSLCNetNumber | 1.3.6.1.4.1.244.1.1.2.10.2 | Integer32 (0..200) | RO | ||||||||||||||||||
scalar · Integer32 (0..200) · read-only · current The number of entries in the SLC Network Manual IP Address table. | |||||||||||||||||||||
| TslcServSLCNetTable | 1.3.6.1.4.1.244.1.1.2.10.3 | NA | |||||||||||||||||||
table · not-accessible · current Table of manually entered IP Address entries. The number of entries is given by the value of slcServSLCNetNumber. | |||||||||||||||||||||
| RslcServSLCNetEntry | 1.3.6.1.4.1.244.1.1.2.10.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing an IP Address for searching the SLC Network.
| |||||||||||||||||||||
| CslcServSLCNetIndex | 1.3.6.1.4.1.244.1.1.2.10.3.1.1 | Integer32 (1..200) | RO | ||||||||||||||||||
column · Integer32 (1..200) · read-only · current Reference index for each manual IP Address. | |||||||||||||||||||||
| CslcServSLCNetIP | 1.3.6.1.4.1.244.1.1.2.10.3.1.2 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The IP Address to search for in the SLC Network. | |||||||||||||||||||||
| NslcServPhoneHome | 1.3.6.1.4.1.244.1.1.2.11 | ||||||||||||||||||||
| SslcServPhoneHomeState | 1.3.6.1.4.1.244.1.1.2.11.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current Enables the Phone Home feature. | |||||||||||||||||||||
| SslcServPhoneHomeIP | 1.3.6.1.4.1.244.1.1.2.11.2 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address used for Phone Home communication. | |||||||||||||||||||||
| NslcServHostList | 1.3.6.1.4.1.244.1.1.2.12 | ||||||||||||||||||||
| SslcServHostListNumber | 1.3.6.1.4.1.244.1.1.2.12.1 | Integer32 (0..50) | RO | ||||||||||||||||||
scalar · Integer32 (0..50) · read-only · current The number of entries in the Host List table. | |||||||||||||||||||||
| TslcServHostListTable | 1.3.6.1.4.1.244.1.1.2.12.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of Host Lists. The number of entries is given by the value of slcServHostListNumber. | |||||||||||||||||||||
| RslcServHostListEntry | 1.3.6.1.4.1.244.1.1.2.12.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing a Host List, used for Dial-in connections on a Device Port or PC Card modem.
| |||||||||||||||||||||
| CslcServHostListIndex | 1.3.6.1.4.1.244.1.1.2.12.2.1.1 | Integer32 (1..50) | RO | ||||||||||||||||||
column · Integer32 (1..50) · read-only · current Reference index for each Host List. | |||||||||||||||||||||
| CslcServHostListName | 1.3.6.1.4.1.244.1.1.2.12.2.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The unique name assigned to the Host List. | |||||||||||||||||||||
| CslcServHostListRetryCount | 1.3.6.1.4.1.244.1.1.2.12.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of times to retry connections to an individual host within the Host List. | |||||||||||||||||||||
| CslcServHostListAuth | 1.3.6.1.4.1.244.1.1.2.12.2.1.4 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, authentication is enabled for the hosts in the Host List. | |||||||||||||||||||||
| CslcServHostListNumHosts | 1.3.6.1.4.1.244.1.1.2.12.2.1.5 | Integer32 (0..10) | RO | ||||||||||||||||||
column · Integer32 (0..10) · read-only · current The number of individual hosts in the Host List. | |||||||||||||||||||||
| CslcServHostListHosts | 1.3.6.1.4.1.244.1.1.2.12.2.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A string containing all hosts in the Host List; the entry for each host is separated by a ';'. Each host entry is formatted as follows: '<Host>,<Protocol>,<TCP Port>,<Escape Sequence>;'. | |||||||||||||||||||||
| NslcServWebTerm | 1.3.6.1.4.1.244.1.1.2.13 | ||||||||||||||||||||
| SslcServWebTermDeployment | 1.3.6.1.4.1.244.1.1.2.13.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The method used to launch the Java Terminal for Web SSH and Web Telnet. This object is deprecated.
| |||||||||||||||||||||
| SslcServWebTermBufSize | 1.3.6.1.4.1.244.1.1.2.13.2 | Integer32 (24..5000) | RO | ||||||||||||||||||
scalar · Integer32 (24..5000) · read-only · current The number of lines in the Java Terminal buffer. | |||||||||||||||||||||
| NslcServSite | 1.3.6.1.4.1.244.1.1.2.14 | ||||||||||||||||||||
| SslcServSiteNumber | 1.3.6.1.4.1.244.1.1.2.14.1 | Integer32 (0..20) | RO | ||||||||||||||||||
scalar · Integer32 (0..20) · read-only · current The number of entries in the Sites table. | |||||||||||||||||||||
| TslcServSiteTable | 1.3.6.1.4.1.244.1.1.2.14.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of Sites. The number of entries is given by the value of slcServSiteNumber. | |||||||||||||||||||||
| RslcServSiteEntry | 1.3.6.1.4.1.244.1.1.2.14.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing a Site, used for connections on a Device Port or PC Card/USB modem.
| |||||||||||||||||||||
| CslcServSiteIndex | 1.3.6.1.4.1.244.1.1.2.14.2.1.1 | Integer32 (1..50) | RO | ||||||||||||||||||
column · Integer32 (1..50) · read-only · current Reference index for each Site. | |||||||||||||||||||||
| CslcServSiteName | 1.3.6.1.4.1.244.1.1.2.14.2.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The unique name assigned to the Site. | |||||||||||||||||||||
| CslcServSitePort | 1.3.6.1.4.1.244.1.1.2.14.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The port the Site is assigned to. If the port is devicePort or usbPort, slcServSitePortId defines which Device Port or USB Port (with an attached modem) the port is assigned to.
| |||||||||||||||||||||
| CslcServSitePortId | 1.3.6.1.4.1.244.1.1.2.14.2.1.4 | Integer32 (0..48) | RO | ||||||||||||||||||
column · Integer32 (0..48) · read-only · current The identifier for a Device Port if slcServSitePort equals devicePort(1), or the identifier for a USB Port if slcServSitePort equals usbPort(5). Otherwise equals zero. | |||||||||||||||||||||
| CslcServSiteLoginHost | 1.3.6.1.4.1.244.1.1.2.14.2.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For PPP or text authentication on dialin, the user login or CHAP host to use for authentication. If authentication is successful, the rest of the site parameters will be used for the connection. | |||||||||||||||||||||
| CslcServSiteCHAPSecret | 1.3.6.1.4.1.244.1.1.2.14.2.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For PPP authentication on dialin, the CHAP secret to use for authentication. | |||||||||||||||||||||
| CslcServSiteTimeout | 1.3.6.1.4.1.244.1.1.2.14.2.1.7 | Integer32 (0..30) | RO | ||||||||||||||||||
column · Integer32 (0..30) · read-only · current The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcServSiteLocalIP | 1.3.6.1.4.1.244.1.1.2.14.2.1.8 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For PPP connections, the local IP Address - all zeros if it should be negotiated. | |||||||||||||||||||||
| CslcServSiteRemoteIP | 1.3.6.1.4.1.244.1.1.2.14.2.1.9 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For PPP connections, the remote IP Address - all zeros if it should be negotiated. | |||||||||||||||||||||
| CslcServSiteStaticRouteIP | 1.3.6.1.4.1.244.1.1.2.14.2.1.10 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For Dial-on-Demand PPP connections, the static route IP Address for the remote network. | |||||||||||||||||||||
| CslcServSiteStaticRouteMask | 1.3.6.1.4.1.244.1.1.2.14.2.1.11 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For Dial-on-Demand PPP connections, the static route subnet mask for the remote network. | |||||||||||||||||||||
| CslcServSiteStaticRouteGateway | 1.3.6.1.4.1.244.1.1.2.14.2.1.12 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For Dial-on-Demand PPP connections, the static route gateway for the remote network. | |||||||||||||||||||||
| CslcServSiteDialoutNum | 1.3.6.1.4.1.244.1.1.2.14.2.1.13 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number to use for dial-out connections. | |||||||||||||||||||||
| CslcServSiteDialoutLogin | 1.3.6.1.4.1.244.1.1.2.14.2.1.14 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current For dial-out connections, the login to use for authenticating to the remote peer; or on dial-in, the login to use if the remote peer requests authentication (for example, a two way CHAP handshake). | |||||||||||||||||||||
| CslcServSiteDialback | 1.3.6.1.4.1.244.1.1.2.14.2.1.15 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the site has permission to use modem dialback. | |||||||||||||||||||||
| CslcServSiteDialbackNum | 1.3.6.1.4.1.244.1.1.2.14.2.1.16 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number to use for dial-back connections. | |||||||||||||||||||||
| CslcServSiteDialbackDelay | 1.3.6.1.4.1.244.1.1.2.14.2.1.17 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current For Dial-back, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
| |||||||||||||||||||||
| CslcServSiteIdleTimeout | 1.3.6.1.4.1.244.1.1.2.14.2.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcServSiteRestartDelay | 1.3.6.1.4.1.244.1.1.2.14.2.1.19 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
| |||||||||||||||||||||
| CslcServSiteCBCPServerAllowNoCallback | 1.3.6.1.4.1.244.1.1.2.14.2.1.20 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation. | |||||||||||||||||||||
| CslcServSiteNATState | 1.3.6.1.4.1.244.1.1.2.14.2.1.21 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2. | |||||||||||||||||||||
| CslcServSiteDialbackRetries | 1.3.6.1.4.1.244.1.1.2.14.2.1.22 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current For Dial-back, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails. | |||||||||||||||||||||
| NslcAuth | 1.3.6.1.4.1.244.1.1.3 | ||||||||||||||||||||
| NslcAuthLocal | 1.3.6.1.4.1.244.1.1.3.1 | ||||||||||||||||||||
| SslcAuthLocalNumber | 1.3.6.1.4.1.244.1.1.3.1.1 | Integer32 (1..128) | RO | ||||||||||||||||||
scalar · Integer32 (1..128) · read-only · current The number of entries in the Local Users table. | |||||||||||||||||||||
| TslcAuthLocalUsersTable | 1.3.6.1.4.1.244.1.1.3.1.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of Local Users entries. The number of entries is given by the value of slcAuthLocalNumber. | |||||||||||||||||||||
| RslcAuthLocalUserEntry | 1.3.6.1.4.1.244.1.1.3.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing a Local Users and it's attributes. | |||||||||||||||||||||
| CslcAuthLocalUserIndex | 1.3.6.1.4.1.244.1.1.3.1.2.1.1 | Integer32 (1..128) | RO | ||||||||||||||||||
column · Integer32 (1..128) · read-only · current Reference index for each Local User. | |||||||||||||||||||||
| CslcAuthLocalUserLogin | 1.3.6.1.4.1.244.1.1.3.1.2.1.2 | OCTET STRING (SIZE (0..33)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..33)) · read-only · current The login for the Local User. If the user account is locked (cannot login), the login is appended with a '*' character. | |||||||||||||||||||||
| CslcAuthLocalUserUID | 1.3.6.1.4.1.244.1.1.3.1.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The unique user identifier number for the Local User. | |||||||||||||||||||||
| CslcAuthLocalUserListenPorts | 1.3.6.1.4.1.244.1.1.3.1.2.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Local User has permission to access via 'connect listen'. | |||||||||||||||||||||
| CslcAuthLocalUserDataPorts | 1.3.6.1.4.1.244.1.1.3.1.2.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Local User has permission to access via 'connect direct'. | |||||||||||||||||||||
| CslcAuthLocalUserClearPorts | 1.3.6.1.4.1.244.1.1.3.1.2.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Local User has permission to clear. | |||||||||||||||||||||
| CslcAuthLocalUserEscapeSeq | 1.3.6.1.4.1.244.1.1.3.1.2.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The character sequence which the Local User uses to terminate connections to Device Ports. | |||||||||||||||||||||
| CslcAuthLocalUserBreakSeq | 1.3.6.1.4.1.244.1.1.3.1.2.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The character sequence which the Local User uses to send a break sequence. | |||||||||||||||||||||
| CslcAuthLocalUserMenu | 1.3.6.1.4.1.244.1.1.3.1.2.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The custom user menu defined for the Local User. If this is empty, there is no menu defined for the Local User. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login. | |||||||||||||||||||||
| CslcAuthLocalUserDialback | 1.3.6.1.4.1.244.1.1.3.1.2.1.10 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the Local User has permission to use modem dialback. | |||||||||||||||||||||
| CslcAuthLocalUserDialbackNum | 1.3.6.1.4.1.244.1.1.3.1.2.1.11 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The dialback number defined for the Local User. | |||||||||||||||||||||
| CslcAuthLocalUserGroup | 1.3.6.1.4.1.244.1.1.3.1.2.1.12 | UserGroup | RO | ||||||||||||||||||
column · UserGroup · read-only · current The group assigned to the Local User. | |||||||||||||||||||||
| CslcAuthLocalUserRights | 1.3.6.1.4.1.244.1.1.3.1.2.1.13 | UserRights | RO | ||||||||||||||||||
column · UserRights · read-only · current The rights assigned to the Local User. | |||||||||||||||||||||
| CslcAuthLocalUserPwdExpires | 1.3.6.1.4.1.244.1.1.3.1.2.1.14 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the local user's password will expire. | |||||||||||||||||||||
| CslcAuthLocalUserChangePwd | 1.3.6.1.4.1.244.1.1.3.1.2.1.15 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the local user can change their password. | |||||||||||||||||||||
| CslcAuthLocalUserChangePwdNextLogin | 1.3.6.1.4.1.244.1.1.3.1.2.1.16 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the local user must change their password at their next login. | |||||||||||||||||||||
| SslcAuthLocalState | 1.3.6.1.4.1.244.1.1.3.1.3 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, Local Users are used for authentication. | |||||||||||||||||||||
| SslcAuthLocalOrder | 1.3.6.1.4.1.244.1.1.3.1.4 | AuthOrder | RO | ||||||||||||||||||
scalar · AuthOrder · read-only · current The authentication order of Local Users in authentication methods. | |||||||||||||||||||||
| SslcAuthLocalComplexPasswords | 1.3.6.1.4.1.244.1.1.3.1.5 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, Local Users are required to use complex passwords that are at least 8 characters long and contain at least one uppercase character, one lowercase character, one digit, and one non-alphanumeric character. | |||||||||||||||||||||
| SslcAuthLocalUseNextMethod | 1.3.6.1.4.1.244.1.1.3.1.6 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current This object applies to all authentication methods, not just Local Users. If enabled, authentication will occur using all methods, in the order of their precedence, until a successful authentication occurs. If disabled, only the first authentication method that responds will be used. | |||||||||||||||||||||
| SslcAuthLocalAllowReuse | 1.3.6.1.4.1.244.1.1.3.1.7 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, local users can reuse old passwords. | |||||||||||||||||||||
| SslcAuthLocalReuseHistory | 1.3.6.1.4.1.244.1.1.3.1.8 | Integer32 (0..8) | RO | ||||||||||||||||||
scalar · Integer32 (0..8) · read-only · current The number of passwords a local user must use before reusing an old password. | |||||||||||||||||||||
| SslcAuthLocalPasswordLifetime | 1.3.6.1.4.1.244.1.1.3.1.9 | Integer32 (1..365) | RO | ||||||||||||||||||
scalar · Integer32 (1..365) · read-only · current The number of days until a password expires.
| |||||||||||||||||||||
| SslcAuthLocalWarningPeriod | 1.3.6.1.4.1.244.1.1.3.1.10 | Integer32 (0..90) | RO | ||||||||||||||||||
scalar · Integer32 (0..90) · read-only · current The number of days before a password expires that a local user is warned about the expiring password. A value of 0 indicates that this feature is disabled.
| |||||||||||||||||||||
| SslcAuthLocalMaxLoginAttempts | 1.3.6.1.4.1.244.1.1.3.1.11 | Integer32 (0..8) | RO | ||||||||||||||||||
scalar · Integer32 (0..8) · read-only · current The number of times a local user can attempt to log in unsuccessfully before the SLC locks the user out. A value of 0 indicates that this feature is disabled. | |||||||||||||||||||||
| SslcAuthLocalLockoutPeriod | 1.3.6.1.4.1.244.1.1.3.1.12 | Integer32 (0..90) | RO | ||||||||||||||||||
scalar · Integer32 (0..90) · read-only · current The number of minutes the locked-out user must wait before trying to log in to to the SLC again. A value of 0 indicates that this feature is disabled.
| |||||||||||||||||||||
| SslcAuthLocalMultipleSysadminLogins | 1.3.6.1.4.1.244.1.1.3.1.13 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, multiple sysadmin logins to the web are allowed. | |||||||||||||||||||||
| SslcAuthLocalSysadminConsoleOnly | 1.3.6.1.4.1.244.1.1.3.1.14 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the sysadmin can only access the SLC via the Console Port. | |||||||||||||||||||||
| NslcAuthNIS | 1.3.6.1.4.1.244.1.1.3.2 | ||||||||||||||||||||
| SslcAuthNISState | 1.3.6.1.4.1.244.1.1.3.2.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, NIS is used for authentication. | |||||||||||||||||||||
| SslcAuthNISOrder | 1.3.6.1.4.1.244.1.1.3.2.2 | AuthOrder | RO | ||||||||||||||||||
scalar · AuthOrder · read-only · current The authentication order of NIS in remote authentication methods. | |||||||||||||||||||||
| SslcAuthNISDomain | 1.3.6.1.4.1.244.1.1.3.2.3 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..80)) · read-only · current The NIS domain. | |||||||||||||||||||||
| SslcAuthNISBroadcast | 1.3.6.1.4.1.244.1.1.3.2.4 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the SLC broadcasts for the NIS server. | |||||||||||||||||||||
| SslcAuthNISMaster | 1.3.6.1.4.1.244.1.1.3.2.5 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the NIS master server. | |||||||||||||||||||||
| SslcAuthNISSlave1 | 1.3.6.1.4.1.244.1.1.3.2.6 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the NIS slave server #1. | |||||||||||||||||||||
| SslcAuthNISSlave2 | 1.3.6.1.4.1.244.1.1.3.2.7 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the NIS slave server #2. | |||||||||||||||||||||
| SslcAuthNISSlave3 | 1.3.6.1.4.1.244.1.1.3.2.8 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the NIS slave server #3. | |||||||||||||||||||||
| SslcAuthNISGroup | 1.3.6.1.4.1.244.1.1.3.2.9 | UserGroup | RO | ||||||||||||||||||
scalar · UserGroup · read-only · current The group assigned to NIS users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthNISRights | 1.3.6.1.4.1.244.1.1.3.2.10 | UserRights | RO | ||||||||||||||||||
scalar · UserRights · read-only · current The rights assigned to NIS users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthNISMenu | 1.3.6.1.4.1.244.1.1.3.2.11 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The custom user menu defined for all NIS users who login to the SLC. If this is empty, there is no menu defined for NIS Users. | |||||||||||||||||||||
| SslcAuthNISListenPorts | 1.3.6.1.4.1.244.1.1.3.2.12 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to access via 'connect listen'. | |||||||||||||||||||||
| SslcAuthNISDataPorts | 1.3.6.1.4.1.244.1.1.3.2.13 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to access via 'connect direct'. | |||||||||||||||||||||
| SslcAuthNISClearPorts | 1.3.6.1.4.1.244.1.1.3.2.14 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to clear. | |||||||||||||||||||||
| SslcAuthNISSlave4 | 1.3.6.1.4.1.244.1.1.3.2.15 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the NIS slave server #4. | |||||||||||||||||||||
| SslcAuthNISSlave5 | 1.3.6.1.4.1.244.1.1.3.2.16 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the NIS slave server #5. | |||||||||||||||||||||
| SslcAuthNISEscapeSeq | 1.3.6.1.4.1.244.1.1.3.2.17 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the NIS user uses to terminate connections to Device Ports. | |||||||||||||||||||||
| SslcAuthNISBreakSeq | 1.3.6.1.4.1.244.1.1.3.2.18 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the NIS user uses to send a break sequence. | |||||||||||||||||||||
| SslcAuthNISDialback | 1.3.6.1.4.1.244.1.1.3.2.19 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, NIS users have permission to use modem dialback. | |||||||||||||||||||||
| SslcAuthNISDialbackNum | 1.3.6.1.4.1.244.1.1.3.2.20 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The dialback number defined for NIS users. | |||||||||||||||||||||
| NslcAuthLDAP | 1.3.6.1.4.1.244.1.1.3.3 | ||||||||||||||||||||
| SslcAuthLDAPState | 1.3.6.1.4.1.244.1.1.3.3.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, LDAP is used for authentication. | |||||||||||||||||||||
| SslcAuthLDAPOrder | 1.3.6.1.4.1.244.1.1.3.3.2 | AuthOrder | RO | ||||||||||||||||||
scalar · AuthOrder · read-only · current The authentication order of LDAP in remote authentication methods. | |||||||||||||||||||||
| SslcAuthLDAPServer | 1.3.6.1.4.1.244.1.1.3.3.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the LDAP server. | |||||||||||||||||||||
| SslcAuthLDAPBase | 1.3.6.1.4.1.244.1.1.3.3.4 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..80)) · read-only · current The LDAP Base. | |||||||||||||||||||||
| SslcAuthLDAPBindName | 1.3.6.1.4.1.244.1.1.3.3.5 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..80)) · read-only · current The LDAP Bind Name. | |||||||||||||||||||||
| SslcAuthLDAPPort | 1.3.6.1.4.1.244.1.1.3.3.6 | Integer32 (0..65535) | RO | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-only · current The LDAP TCP Port Number. | |||||||||||||||||||||
| SslcAuthLDAPADSupport | 1.3.6.1.4.1.244.1.1.3.3.7 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, Active Directory support is enabled for LDAP. | |||||||||||||||||||||
| SslcAuthLDAPGroup | 1.3.6.1.4.1.244.1.1.3.3.8 | UserGroup | RO | ||||||||||||||||||
scalar · UserGroup · read-only · current The group assigned to LDAP users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthLDAPRights | 1.3.6.1.4.1.244.1.1.3.3.9 | UserRights | RO | ||||||||||||||||||
scalar · UserRights · read-only · current The rights assigned to LDAP users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthLDAPMenu | 1.3.6.1.4.1.244.1.1.3.3.10 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The custom user menu defined for all LDAP users who login to the SLC. If this is empty, there is no menu defined for LDAP Users. | |||||||||||||||||||||
| SslcAuthLDAPListenPorts | 1.3.6.1.4.1.244.1.1.3.3.11 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to access via 'connect listen'. | |||||||||||||||||||||
| SslcAuthLDAPDataPorts | 1.3.6.1.4.1.244.1.1.3.3.12 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to access via 'connect direct'. | |||||||||||||||||||||
| SslcAuthLDAPClearPorts | 1.3.6.1.4.1.244.1.1.3.3.13 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to clear. | |||||||||||||||||||||
| SslcAuthLDAPEncrypt | 1.3.6.1.4.1.244.1.1.3.3.14 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, encrypt messages between the SLC and the LDAP server. | |||||||||||||||||||||
| SslcAuthLDAPEscapeSeq | 1.3.6.1.4.1.244.1.1.3.3.15 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the LDAP user uses to terminate connections to Device Ports. | |||||||||||||||||||||
| SslcAuthLDAPBreakSeq | 1.3.6.1.4.1.244.1.1.3.3.16 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the LDAP user uses to send a break sequence. | |||||||||||||||||||||
| SslcAuthLDAPBindWithLogin | 1.3.6.1.4.1.244.1.1.3.3.17 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, bind to the LDAP server using the current login and password. The $login token in slcAuthLDAPBindName will be replaced with the current login. | |||||||||||||||||||||
| SslcAuthLDAPUseLDAPSchema | 1.3.6.1.4.1.244.1.1.3.3.18 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, attributes and permissions for remote users are retrieved from an LDAP server. | |||||||||||||||||||||
| SslcAuthLDAPDialback | 1.3.6.1.4.1.244.1.1.3.3.19 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, LDAP users have permission to use modem dialback. | |||||||||||||||||||||
| SslcAuthLDAPDialbackNum | 1.3.6.1.4.1.244.1.1.3.3.20 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The dialback number defined for LDAP users. | |||||||||||||||||||||
| SslcAuthLDAPUserFilter | 1.3.6.1.4.1.244.1.1.3.3.21 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The attribute used by the LDAP server for user logins. | |||||||||||||||||||||
| SslcAuthLDAPGroupFilter | 1.3.6.1.4.1.244.1.1.3.3.22 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The objectclass used by the LDAP server for groups. | |||||||||||||||||||||
| SslcAuthLDAPGroupMembershipAttr | 1.3.6.1.4.1.244.1.1.3.3.23 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The attribute used by the LDAP server for group membership. This attribute may be use to search for a name (ie, msmith) or a Distinguished Name (ie, uid=msmith,ou=People,dc=lantronix,dc=com). | |||||||||||||||||||||
| SslcAuthLDAPGroupMembershipDN | 1.3.6.1.4.1.244.1.1.3.3.24 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the string given by slcAuthLDAPGroupMembershipAttr is a Distinguished Name (DN). Otherwise the string is a name. | |||||||||||||||||||||
| SslcAuthLDAPServer2 | 1.3.6.1.4.1.244.1.1.3.3.25 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the secondary/backup LDAP server. | |||||||||||||||||||||
| SslcAuthLDAPServerIPv6 | 1.3.6.1.4.1.244.1.1.3.3.26 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the LDAP server. | |||||||||||||||||||||
| SslcAuthLDAPServer2IPv6 | 1.3.6.1.4.1.244.1.1.3.3.27 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the secondary/backup LDAP server. | |||||||||||||||||||||
| NslcAuthRADIUS | 1.3.6.1.4.1.244.1.1.3.4 | ||||||||||||||||||||
| SslcAuthRADIUSState | 1.3.6.1.4.1.244.1.1.3.4.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, RADIUS is used for authentication. | |||||||||||||||||||||
| SslcAuthRADIUSOrder | 1.3.6.1.4.1.244.1.1.3.4.2 | AuthOrder | RO | ||||||||||||||||||
scalar · AuthOrder · read-only · current The authentication order of RADIUS in remote authentication methods. | |||||||||||||||||||||
| SslcAuthRADIUSTimeout | 1.3.6.1.4.1.244.1.1.3.4.3 | Integer32 (0..30) | RO | ||||||||||||||||||
scalar · Integer32 (0..30) · read-only · current The RADIUS Timeout in seconds. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| TslcAuthRADIUSServerTable | 1.3.6.1.4.1.244.1.1.3.4.4 | NA | |||||||||||||||||||
table · not-accessible · current Table of RADIUS servers. | |||||||||||||||||||||
| RslcAuthRADIUSServerEntry | 1.3.6.1.4.1.244.1.1.3.4.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing a RADIUS server and it's parameters. | |||||||||||||||||||||
| CslcAuthRADIUSServerIndex | 1.3.6.1.4.1.244.1.1.3.4.4.1.1 | Integer32 (1..2) | RO | ||||||||||||||||||
column · Integer32 (1..2) · read-only · current Reference index for each RADIUS server. | |||||||||||||||||||||
| CslcAuthRADIUSServer | 1.3.6.1.4.1.244.1.1.3.4.4.1.2 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The IPv4 Address of the RADIUS server. | |||||||||||||||||||||
| CslcAuthRADIUSPort | 1.3.6.1.4.1.244.1.1.3.4.4.1.3 | Integer32 (0..65535) | RO | ||||||||||||||||||
column · Integer32 (0..65535) · read-only · current The RADIUS Server TCP Port Number. | |||||||||||||||||||||
| CslcAuthRADIUSServerIPv6 | 1.3.6.1.4.1.244.1.1.3.4.4.1.4 | Ipv6Address | RO | ||||||||||||||||||
column · Ipv6Address · read-only · current The IPv6 Address of the RADIUS server. | |||||||||||||||||||||
| SslcAuthRADIUSGroup | 1.3.6.1.4.1.244.1.1.3.4.5 | UserGroup | RO | ||||||||||||||||||
scalar · UserGroup · read-only · current The group assigned to RADIUS users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthRADIUSRights | 1.3.6.1.4.1.244.1.1.3.4.6 | UserRights | RO | ||||||||||||||||||
scalar · UserRights · read-only · current The rights assigned to RADIUS users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthRADIUSMenu | 1.3.6.1.4.1.244.1.1.3.4.7 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The custom user menu defined for all RADIUS users who login to the SLC. If this is empty, there is no menu defined for RADIUS Users. | |||||||||||||||||||||
| SslcAuthRADIUSListenPorts | 1.3.6.1.4.1.244.1.1.3.4.8 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to access via 'connect listen'. | |||||||||||||||||||||
| SslcAuthRADIUSDataPorts | 1.3.6.1.4.1.244.1.1.3.4.9 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to access via 'connect direct'. | |||||||||||||||||||||
| SslcAuthRADIUSClearPorts | 1.3.6.1.4.1.244.1.1.3.4.10 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to clear. | |||||||||||||||||||||
| SslcAuthRADIUSEscapeSeq | 1.3.6.1.4.1.244.1.1.3.4.11 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the RADIUS user uses to terminate connections to Device Ports. | |||||||||||||||||||||
| SslcAuthRADIUSBreakSeq | 1.3.6.1.4.1.244.1.1.3.4.12 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the RADIUS user uses to send a break sequence. | |||||||||||||||||||||
| SslcAuthRADIUSDialback | 1.3.6.1.4.1.244.1.1.3.4.13 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, RADIUS users have permission to use modem dialback. | |||||||||||||||||||||
| SslcAuthRADIUSDialbackNum | 1.3.6.1.4.1.244.1.1.3.4.14 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The dialback number defined for RADIUS users. | |||||||||||||||||||||
| SslcAuthRADIUSUseVSA | 1.3.6.1.4.1.244.1.1.3.4.15 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the SLC will obtain remote user attributes (group/permissions and port access) from the RADIUS server via the Vendor-Specific Attribute (VSA). | |||||||||||||||||||||
| NslcAuthKerberos | 1.3.6.1.4.1.244.1.1.3.5 | ||||||||||||||||||||
| SslcAuthKerbState | 1.3.6.1.4.1.244.1.1.3.5.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, Kerberos is used for authentication. | |||||||||||||||||||||
| SslcAuthKerbOrder | 1.3.6.1.4.1.244.1.1.3.5.2 | AuthOrder | RO | ||||||||||||||||||
scalar · AuthOrder · read-only · current The authentication order of Kerberos in remote authentication methods. | |||||||||||||||||||||
| SslcAuthKerbRealm | 1.3.6.1.4.1.244.1.1.3.5.3 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..256)) · read-only · current The Kerberos Realm. | |||||||||||||||||||||
| SslcAuthKerbKDC | 1.3.6.1.4.1.244.1.1.3.5.4 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..256)) · read-only · current The Kerberos KDC. | |||||||||||||||||||||
| SslcAuthKerbKDCIP | 1.3.6.1.4.1.244.1.1.3.5.5 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the Kerberos Key Distribution Server. | |||||||||||||||||||||
| SslcAuthKerbKDCPort | 1.3.6.1.4.1.244.1.1.3.5.6 | Integer32 (0..65535) | RO | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-only · current The Kerberos KDC Port Number. | |||||||||||||||||||||
| SslcAuthKerbUseLDAP | 1.3.6.1.4.1.244.1.1.3.5.7 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, LDAP is used for lookups. | |||||||||||||||||||||
| SslcAuthKerbGroup | 1.3.6.1.4.1.244.1.1.3.5.8 | UserGroup | RO | ||||||||||||||||||
scalar · UserGroup · read-only · current The group assigned to Kerberos users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthKerbRights | 1.3.6.1.4.1.244.1.1.3.5.9 | UserRights | RO | ||||||||||||||||||
scalar · UserRights · read-only · current The rights assigned to Kerberos users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthKerbMenu | 1.3.6.1.4.1.244.1.1.3.5.10 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The custom user menu defined for all Kerberos users who login to the SLC. If this is empty, there is no menu defined for Kerberos Users. | |||||||||||||||||||||
| SslcAuthKerbListenPorts | 1.3.6.1.4.1.244.1.1.3.5.11 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to access via 'connect listen'. | |||||||||||||||||||||
| SslcAuthKerbDataPorts | 1.3.6.1.4.1.244.1.1.3.5.12 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to access via 'connect direct'. | |||||||||||||||||||||
| SslcAuthKerbClearPorts | 1.3.6.1.4.1.244.1.1.3.5.13 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to clear. | |||||||||||||||||||||
| SslcAuthKerbEscapeSeq | 1.3.6.1.4.1.244.1.1.3.5.14 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the Kerberos user uses to terminate connections to Device Ports. | |||||||||||||||||||||
| SslcAuthKerbBreakSeq | 1.3.6.1.4.1.244.1.1.3.5.15 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the Kerberos user uses to send a break sequence. | |||||||||||||||||||||
| SslcAuthKerbDialback | 1.3.6.1.4.1.244.1.1.3.5.16 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, Kerberos users have permission to use modem dialback. | |||||||||||||||||||||
| SslcAuthKerbDialbackNum | 1.3.6.1.4.1.244.1.1.3.5.17 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The dialback number defined for Kerberos users. | |||||||||||||||||||||
| SslcAuthKerbKDCIPv6 | 1.3.6.1.4.1.244.1.1.3.5.18 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the Kerberos Key Distribution Server. | |||||||||||||||||||||
| NslcAuthTACACS | 1.3.6.1.4.1.244.1.1.3.6 | ||||||||||||||||||||
| SslcAuthTACACSState | 1.3.6.1.4.1.244.1.1.3.6.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, TACACS is used for authentication. | |||||||||||||||||||||
| SslcAuthTACACSOrder | 1.3.6.1.4.1.244.1.1.3.6.2 | AuthOrder | RO | ||||||||||||||||||
scalar · AuthOrder · read-only · current The authentication order of TACACS in remote authentication methods. | |||||||||||||||||||||
| SslcAuthTACACSServer | 1.3.6.1.4.1.244.1.1.3.6.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the first TACACS server. | |||||||||||||||||||||
| SslcAuthTACACSEncrypt | 1.3.6.1.4.1.244.1.1.3.6.4 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, encrypt messages between the SLC and the TACACS server. | |||||||||||||||||||||
| SslcAuthTACACSGroup | 1.3.6.1.4.1.244.1.1.3.6.5 | UserGroup | RO | ||||||||||||||||||
scalar · UserGroup · read-only · current The group assigned to TACACS users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthTACACSRights | 1.3.6.1.4.1.244.1.1.3.6.6 | UserRights | RO | ||||||||||||||||||
scalar · UserRights · read-only · current The rights assigned to TACACS users who login to the SLC and do not have group/rights defined in the Remote User database. | |||||||||||||||||||||
| SslcAuthTACACSMenu | 1.3.6.1.4.1.244.1.1.3.6.7 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The custom user menu defined for all TACACS users who login to the SLC. If this is empty, there is no menu defined for TACACS Users. | |||||||||||||||||||||
| SslcAuthTACACSListenPorts | 1.3.6.1.4.1.244.1.1.3.6.8 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to access via 'connect listen'. | |||||||||||||||||||||
| SslcAuthTACACSDataPorts | 1.3.6.1.4.1.244.1.1.3.6.9 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to access via 'connect direct'. | |||||||||||||||||||||
| SslcAuthTACACSClearPorts | 1.3.6.1.4.1.244.1.1.3.6.10 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to clear. | |||||||||||||||||||||
| SslcAuthTACACSServer2 | 1.3.6.1.4.1.244.1.1.3.6.11 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the second TACACS server. | |||||||||||||||||||||
| SslcAuthTACACSServer3 | 1.3.6.1.4.1.244.1.1.3.6.12 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IPv4 Address of the third TACACS server. | |||||||||||||||||||||
| SslcAuthTACACSEscapeSeq | 1.3.6.1.4.1.244.1.1.3.6.13 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the TACACS user uses to terminate connections to Device Ports. | |||||||||||||||||||||
| SslcAuthTACACSBreakSeq | 1.3.6.1.4.1.244.1.1.3.6.14 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character sequence which the TACACS user uses to send a break sequence. | |||||||||||||||||||||
| SslcAuthTACACSDialback | 1.3.6.1.4.1.244.1.1.3.6.15 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, TACACS users have permission to use modem dialback. | |||||||||||||||||||||
| SslcAuthTACACSDialbackNum | 1.3.6.1.4.1.244.1.1.3.6.16 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The dialback number defined for TACACS users. | |||||||||||||||||||||
| SslcAuthTACACSAuthService | 1.3.6.1.4.1.244.1.1.3.6.17 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of service used to pass the authentications tokens (e.g., login and password) between the SLC and the TACACS+ server.
| |||||||||||||||||||||
| SslcAuthTACACSServerIPv6 | 1.3.6.1.4.1.244.1.1.3.6.18 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the first TACACS server. | |||||||||||||||||||||
| SslcAuthTACACSServer2IPv6 | 1.3.6.1.4.1.244.1.1.3.6.19 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the second TACACS server. | |||||||||||||||||||||
| SslcAuthTACACSServer3IPv6 | 1.3.6.1.4.1.244.1.1.3.6.20 | Ipv6Address | RO | ||||||||||||||||||
scalar · Ipv6Address · read-only · current The IPv6 Address of the third TACACS server. | |||||||||||||||||||||
| NslcAuthRemote | 1.3.6.1.4.1.244.1.1.3.7 | ||||||||||||||||||||
| SslcAuthRemoteNumber | 1.3.6.1.4.1.244.1.1.3.7.1 | Integer32 (0..128) | RO | ||||||||||||||||||
scalar · Integer32 (0..128) · read-only · current The number of entries in the Remote Users table. | |||||||||||||||||||||
| TslcAuthRemoteUsersTable | 1.3.6.1.4.1.244.1.1.3.7.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of Remote Users entries. The number of entries is given by the value of slcAuthRemoteNumber. | |||||||||||||||||||||
| RslcAuthRemoteUserEntry | 1.3.6.1.4.1.244.1.1.3.7.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing a Remote User and its attributes. | |||||||||||||||||||||
| CslcAuthRemoteUserIndex | 1.3.6.1.4.1.244.1.1.3.7.2.1.1 | Integer32 (1..128) | RO | ||||||||||||||||||
column · Integer32 (1..128) · read-only · current Reference index for each Remote User. | |||||||||||||||||||||
| CslcAuthRemoteUserLogin | 1.3.6.1.4.1.244.1.1.3.7.2.1.2 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The login for the Remote User. | |||||||||||||||||||||
| CslcAuthRemoteUserGroup | 1.3.6.1.4.1.244.1.1.3.7.2.1.3 | UserGroup | RO | ||||||||||||||||||
column · UserGroup · read-only · current The group assigned to the Remote User. | |||||||||||||||||||||
| CslcAuthRemoteUserRights | 1.3.6.1.4.1.244.1.1.3.7.2.1.4 | UserRights | RO | ||||||||||||||||||
column · UserRights · read-only · current The rights assigned to the Remote User. | |||||||||||||||||||||
| CslcAuthRemoteUserListenPorts | 1.3.6.1.4.1.244.1.1.3.7.2.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Remote User has permission to access via 'connect listen'. | |||||||||||||||||||||
| CslcAuthRemoteUserDataPorts | 1.3.6.1.4.1.244.1.1.3.7.2.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Remote User has permission to access via 'connect direct'. | |||||||||||||||||||||
| CslcAuthRemoteUserClearPorts | 1.3.6.1.4.1.244.1.1.3.7.2.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Remote User has permission to clear. | |||||||||||||||||||||
| CslcAuthRemoteUserEscapeSeq | 1.3.6.1.4.1.244.1.1.3.7.2.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The character sequence which the Remote User uses to terminate connections to Device Ports. | |||||||||||||||||||||
| CslcAuthRemoteUserBreakSeq | 1.3.6.1.4.1.244.1.1.3.7.2.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The character sequence which the Remote User uses to send a break sequence. | |||||||||||||||||||||
| CslcAuthRemoteUserMenu | 1.3.6.1.4.1.244.1.1.3.7.2.1.10 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The custom user menu defined for the Remote User. If this is empty, there is no menu defined for the Remote User. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login. | |||||||||||||||||||||
| CslcAuthRemoteUserLocked | 1.3.6.1.4.1.244.1.1.3.7.2.1.11 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the Remote User's account is locked (blocked). | |||||||||||||||||||||
| CslcAuthRemoteUserDialback | 1.3.6.1.4.1.244.1.1.3.7.2.1.12 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the Remote User has permission to use modem dialback. | |||||||||||||||||||||
| CslcAuthRemoteUserDialbackNum | 1.3.6.1.4.1.244.1.1.3.7.2.1.13 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The dialback number defined for the Remote User. | |||||||||||||||||||||
| SslcAuthRemoteAuthListOnly | 1.3.6.1.4.1.244.1.1.3.7.3 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, remote users who log into the SLC will only be authenticated if they are listed in the remote user list. | |||||||||||||||||||||
| NslcAuthGroups | 1.3.6.1.4.1.244.1.1.3.8 | ||||||||||||||||||||
| SslcAuthGroupsNumber | 1.3.6.1.4.1.244.1.1.3.8.1 | Integer32 (0..20) | RO | ||||||||||||||||||
scalar · Integer32 (0..20) · read-only · current The number of entries in the Groups table. | |||||||||||||||||||||
| TslcAuthGroupsTable | 1.3.6.1.4.1.244.1.1.3.8.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of Groups entries. The number of entries is given by the value of slcAuthGroupsNumber. | |||||||||||||||||||||
| RslcAuthGroupEntry | 1.3.6.1.4.1.244.1.1.3.8.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing a Remote User and its attributes.
| |||||||||||||||||||||
| CslcAuthGroupIndex | 1.3.6.1.4.1.244.1.1.3.8.2.1.1 | Integer32 (1..128) | RO | ||||||||||||||||||
column · Integer32 (1..128) · read-only · current Reference index for each Group. | |||||||||||||||||||||
| CslcAuthGroupName | 1.3.6.1.4.1.244.1.1.3.8.2.1.2 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current The name for the Group. | |||||||||||||||||||||
| CslcAuthGroupRights | 1.3.6.1.4.1.244.1.1.3.8.2.1.3 | UserRights | RO | ||||||||||||||||||
column · UserRights · read-only · current The rights assigned to the Group. | |||||||||||||||||||||
| CslcAuthGroupListenPorts | 1.3.6.1.4.1.244.1.1.3.8.2.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Group has permission to access via 'connect listen'. | |||||||||||||||||||||
| CslcAuthGroupDataPorts | 1.3.6.1.4.1.244.1.1.3.8.2.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Group has permission to access via 'connect direct'. | |||||||||||||||||||||
| CslcAuthGroupClearPorts | 1.3.6.1.4.1.244.1.1.3.8.2.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Device Ports and PC Card slots/USB ports which the Group has permission to clear. | |||||||||||||||||||||
| CslcAuthGroupEscapeSeq | 1.3.6.1.4.1.244.1.1.3.8.2.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The character sequence which the Group uses to terminate connections to Device Ports. | |||||||||||||||||||||
| CslcAuthGroupBreakSeq | 1.3.6.1.4.1.244.1.1.3.8.2.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The character sequence which the Group uses to send a break sequence. | |||||||||||||||||||||
| CslcAuthGroupMenu | 1.3.6.1.4.1.244.1.1.3.8.2.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The custom user menu defined for the Group. If this is empty, there is no menu defined for the Group. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login. | |||||||||||||||||||||
| CslcAuthGroupDialback | 1.3.6.1.4.1.244.1.1.3.8.2.1.10 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the Group has permission to use modem dialback. | |||||||||||||||||||||
| CslcAuthGroupDialbackNum | 1.3.6.1.4.1.244.1.1.3.8.2.1.11 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The dialback number defined for the Group. | |||||||||||||||||||||
| NslcDevices | 1.3.6.1.4.1.244.1.1.4 | ||||||||||||||||||||
| NslcDevConsolePort | 1.3.6.1.4.1.244.1.1.4.1 | ||||||||||||||||||||
| SslcDevConBaud | 1.3.6.1.4.1.244.1.1.4.1.1 | Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200) | RO | ||||||||||||||||||
scalar · Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200) · read-only · current The baud rate of the Console Port. | |||||||||||||||||||||
| SslcDevConDataBits | 1.3.6.1.4.1.244.1.1.4.1.2 | Integer32 (7 | 8) | RO | ||||||||||||||||||
scalar · Integer32 (7 | 8) · read-only · current The data bits of the Console Port. | |||||||||||||||||||||
| SslcDevConStopBits | 1.3.6.1.4.1.244.1.1.4.1.3 | Integer32 (1 | 2) | RO | ||||||||||||||||||
scalar · Integer32 (1 | 2) · read-only · current The stop bits of the Console Port. | |||||||||||||||||||||
| SslcDevConParity | 1.3.6.1.4.1.244.1.1.4.1.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The parity of the Console Port.
| |||||||||||||||||||||
| SslcDevConFlowControl | 1.3.6.1.4.1.244.1.1.4.1.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The flow control of the Console Port.
| |||||||||||||||||||||
| SslcDevConTimeout | 1.3.6.1.4.1.244.1.1.4.1.6 | Integer32 (0..30) | RO | ||||||||||||||||||
scalar · Integer32 (0..30) · read-only · current The timeout (in minutes) for logins to the Console Port. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| SslcDevConShowLines | 1.3.6.1.4.1.244.1.1.4.1.7 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, upon connecting to the Console Port, a series of characters (or lines) output to the Console Port before it was connected to are displayed. | |||||||||||||||||||||
| SslcDevConNumberShowLines | 1.3.6.1.4.1.244.1.1.4.1.8 | Integer32 (1..50) | RO | ||||||||||||||||||
scalar · Integer32 (1..50) · read-only · current If slcDevConShowLines is enabled, the number of lines that are displayed upon connecting to the Console Port. | |||||||||||||||||||||
| SslcDevConGroup | 1.3.6.1.4.1.244.1.1.4.1.9 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The group or groups that may access the Console Port. | |||||||||||||||||||||
| NslcDevDevicePorts | 1.3.6.1.4.1.244.1.1.4.2 | ||||||||||||||||||||
| NslcDevPortGlobal | 1.3.6.1.4.1.244.1.1.4.2.1 | ||||||||||||||||||||
| SslcDevGlobalListenPorts | 1.3.6.1.4.1.244.1.1.4.2.1.1 | OCTET STRING | RO | obsolete | |||||||||||||||||
scalar · OCTET STRING · read-only · obsolete The Device Ports which remotely authenticated users have permission to access via 'connect listen'. This object has been replaced by permissions for each remote authentication method: slcAuthNISListenPorts, slcAuthLDAPListenPorts, slcAuthRADIUSListenPorts, slcAuthKerbListenPorts, slcAuthTACACSListenPorts. | |||||||||||||||||||||
| SslcDevGlobalDataPorts | 1.3.6.1.4.1.244.1.1.4.2.1.2 | OCTET STRING | RO | obsolete | |||||||||||||||||
scalar · OCTET STRING · read-only · obsolete The Device Ports which remotely authenticated users have permission to access via 'connect direct'. This object has been replaced by permissions for each remote authentication method: slcAuthNISDataPorts, slcAuthLDAPDataPorts, slcAuthRADIUSDataPorts, slcAuthKerbDataPorts, slcAuthTACACSDataPorts. | |||||||||||||||||||||
| SslcDevGlobalClearPorts | 1.3.6.1.4.1.244.1.1.4.2.1.3 | OCTET STRING | RO | obsolete | |||||||||||||||||
scalar · OCTET STRING · read-only · obsolete The Device Ports which remotely authenticated users have permission to clear. This object has been replaced by permissions for each remote authentication method: slcAuthNISClearPorts, slcAuthLDAPClearPorts, slcAuthRADIUSClearPorts, slcAuthKerbClearPorts, slcAuthTACACSClearPorts. | |||||||||||||||||||||
| SslcDevGlobalStartTelnetPort | 1.3.6.1.4.1.244.1.1.4.2.1.4 | Integer32 (0..65535) | RO | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-only · current The starting TCP port for Telnet in connections to Device Ports. | |||||||||||||||||||||
| SslcDevGlobalStartSSHPort | 1.3.6.1.4.1.244.1.1.4.2.1.5 | Integer32 (0..65535) | RO | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-only · current The starting TCP port for SSH in connections to Device Ports. | |||||||||||||||||||||
| SslcDevGlobalStartTCPPort | 1.3.6.1.4.1.244.1.1.4.2.1.6 | Integer32 (0..65535) | RO | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-only · current The starting TCP port for TCP in connections to Device Ports. | |||||||||||||||||||||
| SslcDevGlobalMaxDirect | 1.3.6.1.4.1.244.1.1.4.2.1.7 | Integer32 (0..10) | RO | obsolete | |||||||||||||||||
scalar · Integer32 (0..10) · read-only · obsolete The maximum number of direct connects allowed for each Device Port. | |||||||||||||||||||||
| NslcDevPortConfig | 1.3.6.1.4.1.244.1.1.4.2.2 | ||||||||||||||||||||
| SslcDevPortCfgNumber | 1.3.6.1.4.1.244.1.1.4.2.2.1 | Integer32 (8 | 16 | 24 | 32 | 40 | 48) | RO | ||||||||||||||||||
scalar · Integer32 (8 | 16 | 24 | 32 | 40 | 48) · read-only · current The number of entries in the Device Port Configuration table. | |||||||||||||||||||||
| TslcDevPortCfgTable | 1.3.6.1.4.1.244.1.1.4.2.2.2 | NA | |||||||||||||||||||
table · not-accessible · current Table for managing Device Port configuration. The number of entries is given by the value of slcDevPortCfgNumber. | |||||||||||||||||||||
| RslcDevPortCfgEntry | 1.3.6.1.4.1.244.1.1.4.2.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing all configuration settings for a Device Port.
| |||||||||||||||||||||
| CslcDevPortId | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.1 | Integer32 (1..48) | RO | ||||||||||||||||||
column · Integer32 (1..48) · read-only · current The identifier for a Device Port. | |||||||||||||||||||||
| CslcDevPortCfgName | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.2 | OCTET STRING (SIZE (1..30)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..30)) · read-only · current The name of the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgDevice | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The device that is connected to the Device Port. The 'slp*' and 'servertech' values are deprecated and have been replaced by the RPM functionality.
| |||||||||||||||||||||
| CslcDevPortCfgDevLogin | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.4 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current The login used to authenticate to the device connected to the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgBreakSeq | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The character sequence for the Device Port to send a break. | |||||||||||||||||||||
| CslcDevPortCfgTelnetState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.6 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Telnet connections to the Device Port are allowed. | |||||||||||||||||||||
| CslcDevPortCfgTelnetPort | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.7 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for Telnet in connections. | |||||||||||||||||||||
| CslcDevPortCfgTelnetAuth | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.8 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access a Device Port with Telnet. | |||||||||||||||||||||
| CslcDevPortCfgSSHState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.9 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, SSH connections to the Device Port are allowed. | |||||||||||||||||||||
| CslcDevPortCfgSSHPort | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.10 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for SSH in connections. | |||||||||||||||||||||
| CslcDevPortCfgSSHAuth | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.11 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access a Device Port with SSH. | |||||||||||||||||||||
| CslcDevPortCfgTCPState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.12 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, TCP connections to the Device Port are allowed. | |||||||||||||||||||||
| CslcDevPortCfgTCPPort | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.13 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for TCP in connections. | |||||||||||||||||||||
| CslcDevPortCfgTCPAuth | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.14 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access a Device Port with TCP. | |||||||||||||||||||||
| CslcDevPortCfgIP | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.15 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The IP Address for Telnet, SSH or TCP in to a Device Port. | |||||||||||||||||||||
| CslcDevPortCfgBaud | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.16 | Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200) | RO | ||||||||||||||||||
column · Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200) · read-only · current The baud rate of the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgDataBits | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.17 | Integer32 (7 | 8) | RO | ||||||||||||||||||
column · Integer32 (7 | 8) · read-only · current The data bits of the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgStopBits | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.18 | Integer32 (1 | 2) | RO | ||||||||||||||||||
column · Integer32 (1 | 2) · read-only · current The stop bits of the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgParity | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The parity of the Device Port.
| |||||||||||||||||||||
| CslcDevPortCfgFlowControl | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The flow control of the Device Port.
| |||||||||||||||||||||
| CslcDevPortCfgLogins | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.21 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, authentication is required to access a serial device connected to a Device Port. | |||||||||||||||||||||
| CslcDevPortCfgConnectDSR | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.22 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the Device Port only establishes a connection if DSR (Data Set Ready) transitions to an asserted state. | |||||||||||||||||||||
| CslcDevPortCfgDisconnectDSR | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.23 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, and a connection to a Device Port is currently in session, the connection will be terminated if DSR (Data Set Ready) transitions to a de-asserted state. | |||||||||||||||||||||
| CslcDevPortCfgModemState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.24 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For an external modem attached to the Device Port, indicates how the modem will be used.
| |||||||||||||||||||||
| CslcDevPortCfgModemMode | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.25 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For an external modem attached to the Device Port, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
| |||||||||||||||||||||
| CslcDevPortCfgLocalIP | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.26 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For PPP connections, the local IP Address - all zeros if it should be negotiated. | |||||||||||||||||||||
| CslcDevPortCfgRemoteIP | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.27 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For PPP connections, the remote IP Address - all zeros if it should be negotiated. | |||||||||||||||||||||
| CslcDevPortCfgAuth | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.28 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For PPP connections, the type of authentication to be used.
| |||||||||||||||||||||
| CslcDevPortCfgCHAPHost | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.29 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use. | |||||||||||||||||||||
| CslcDevPortCfgInitScript | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.30 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The initialization script for an external modem. | |||||||||||||||||||||
| CslcDevPortCfgTimeout | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.31 | Integer32 (0..30) | RO | ||||||||||||||||||
column · Integer32 (0..30) · read-only · current The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcDevPortCfgDialoutNum | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.32 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number to use for dial-out connections. | |||||||||||||||||||||
| CslcDevPortCfgDialoutLogin | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.33 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current The login to use for dial-out connections. | |||||||||||||||||||||
| CslcDevPortCfgDialbackMode | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.34 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
| |||||||||||||||||||||
| CslcDevPortCfgDialbackNum | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.35 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number to use for dial-back connections. | |||||||||||||||||||||
| CslcDevPortCfgNATState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.36 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2. | |||||||||||||||||||||
| CslcDevPortCfgLocalState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.37 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, local logging is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgNFSFileState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.38 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, NFS File logging is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgNFSDir | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.39 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The local directory of a NFS mount to use for logging. | |||||||||||||||||||||
| CslcDevPortCfgNFSMaxFiles | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.40 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum number of files to use for NFS file logging. | |||||||||||||||||||||
| CslcDevPortCfgNFSMaxSize | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.41 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum size of each file (in bytes) for NFS File logging.
| |||||||||||||||||||||
| CslcDevPortCfgEmailState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.42 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Token and Data Detection (previously called 'Email Logging') is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgEmailTrigger | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.43 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of trigger to use for Token and Data Detection (previously called 'Email Logging') - number of data bytes received, or token/character string received.
| |||||||||||||||||||||
| CslcDevPortCfgEmailByteThresh | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.44 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current When Token and Data Detection (previously called 'Email Logging') is configured to trigger on a data byte count, the number of bytes required to trigger an action. | |||||||||||||||||||||
| CslcDevPortCfgEmailDelay | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.45 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current For Token and Data Detection (previously called 'Email Logging'), a time limit of how long the device port will capture data after the data trigger is detected and before closing the log file and performing the selected actions. This setting is now called 'Action Delay'.
| |||||||||||||||||||||
| CslcDevPortCfgEmailRestartDelay | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.46 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current For Token and Data Detection (previously called 'Email Logging'), the period of time, after performing the selected actions, during which the device port will ignore additional characters received.
| |||||||||||||||||||||
| CslcDevPortCfgEmailTextString | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.47 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current When Token and Data Detection (previously called 'Email Logging') is configured to trigger on a character string, this defines the character string that will trigger an action. | |||||||||||||||||||||
| CslcDevPortCfgEmailTo | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.48 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For Token and Data Detection (previously called 'Email Logging'), if the Email action is enabled, this object defines the list of emails to send email notification to. | |||||||||||||||||||||
| CslcDevPortCfgEmailSubject | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.49 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For Token and Data Detection (previously called 'Email Logging'), if the Email action is enabled, this object defines the subject to include with email notification. | |||||||||||||||||||||
| CslcDevPortCfgPCCardState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.50 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, PC Card logging is enabled for the Device Port. This value will be undefined if the SLC does not have PC Card slots. | |||||||||||||||||||||
| CslcDevPortCfgPCCardLogTo | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.51 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For PC Card logging, which PC Card slot to use for logging. This value will be undefined if the SLC does not have PC Card slots.
| |||||||||||||||||||||
| CslcDevPortCfgPCCardMaxFiles | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.52 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum number of files to use for PC Card logging. This value will be undefined if the SLC does not have PC Card slots. | |||||||||||||||||||||
| CslcDevPortCfgPCCardMaxSize | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.53 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum size of each file (in bytes) for PC Card logging. This value will be undefined if the SLC does not have PC Card slots. | |||||||||||||||||||||
| CslcDevPortCfgAction | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.54 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Performs an action on a Device Port. A read of this object always returns the value noAction(1). Setting this object to zeroPortCounters(2) will reset all port counters given in slcDevPortStateTable. Setting this object to clearLocalLog(3) will clear the local logging buffer. Setting this object to terminateConnections(4) will terminate all connections associated with the Device Port.
| |||||||||||||||||||||
| CslcDevPortCfgEmailSend | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.55 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current When a trigger is received, the type of notification to send: email, SNMP trap, or email and SNMP trap. This object is deprecated; instead refer to slcDevPortCfgTokenAction.
| |||||||||||||||||||||
| CslcDevPortCfgBanner | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.56 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The banner displayed when the Device Port is connected to via SSH or Telnet. | |||||||||||||||||||||
| CslcDevPortCfgIdleTimeout | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.57 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcDevPortCfgRestartDelay | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.58 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
| |||||||||||||||||||||
| CslcDevPortCfgCallerIdLogging | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.59 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, caller id logging is enabled for a modem dial-in connection. | |||||||||||||||||||||
| CslcDevPortCfgCallerIdATCmd | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.60 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The modem AT command required to initiate caller id logging by the modem. | |||||||||||||||||||||
| CslcDevPortCfgDODAuth | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.61 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
| |||||||||||||||||||||
| CslcDevPortCfgDODCHAPHost | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.62 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use. | |||||||||||||||||||||
| CslcDevPortCfgSLMLoggingState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.63 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, SLM logging is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgSLMNMS | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.64 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The IP Addresses of up to three SNMP Network Management Stations defined used for SLM Logging. Multiple IP Addresses will be separated by a comma. | |||||||||||||||||||||
| CslcDevPortCfgSLMByteThresh | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.65 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of bytes required to trigger SLM logging.
| |||||||||||||||||||||
| CslcDevPortCfgSLMTimeFrame | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.66 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The time frame for SLM logging, in seconds.
| |||||||||||||||||||||
| CslcDevPortCfgWebColumns | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.67 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of columns in the Web SSH or Telnet window for this Device Port. | |||||||||||||||||||||
| CslcDevPortCfgWebRows | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.68 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of rows in the Web SSH or Telnet window for this Device Port. | |||||||||||||||||||||
| CslcDevPortCfgSyslogState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.69 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Syslog logging is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgHostList | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.70 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current When slcDevPortCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in. | |||||||||||||||||||||
| CslcDevPortCfgDevLowTemp | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.71 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The low temperature limit, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
| |||||||||||||||||||||
| CslcDevPortCfgDevHighTemp | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.72 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The high temperature limit, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
| |||||||||||||||||||||
| CslcDevPortCfgDevTemperature | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.73 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The actual temperature, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, an empty string will be returned.
| |||||||||||||||||||||
| CslcDevPortCfgDevLowHumidity | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.74 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The low humidty limit, in percentage, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned. | |||||||||||||||||||||
| CslcDevPortCfgDevHighHumidity | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.75 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The high humidty limit, in percentage, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned. | |||||||||||||||||||||
| CslcDevPortCfgDevHumidity | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.76 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The actual humidity, in percentage, for the device connected to this Device Port. If the temperature is not applicable, an empty string will be returned. | |||||||||||||||||||||
| CslcDevPortCfgDevTraps | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.77 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, traps will be sent when one of the limits for the device connected to this Device Port are exceeded. | |||||||||||||||||||||
| CslcDevPortCfgShowLines | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.78 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, upon connecting to the Device Port, a series of characters (or lines) output to the Device Port before it was connected to are displayed. | |||||||||||||||||||||
| CslcDevPortCfgNumberShowLines | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.79 | Integer32 (1..50) | RO | ||||||||||||||||||
column · Integer32 (1..50) · read-only · current If slcDevPortCfgShowLines is enabled, the number of lines that are displayed upon connecting to the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgViewPortLog | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.80 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, upon using 'connect direct' to a Device Port, the slcDevPortCfgPortLogSeq key sequence can be typed to view the end of the port log for the current Device Port, or a different Device Port. | |||||||||||||||||||||
| CslcDevPortCfgPortLogSeq | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.81 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The character sequence to view the port log for the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgMaxDirectConnects | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.82 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum number of direct connects at the CLI for the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgTelnetTimeout | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.83 | Integer32 (0..1800) | RO | ||||||||||||||||||
column · Integer32 (0..1800) · read-only · current The timeout (in seconds) for Telnet connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcDevPortCfgSSHTimeout | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.84 | Integer32 (0..1800) | RO | ||||||||||||||||||
column · Integer32 (0..1800) · read-only · current The timeout (in seconds) for SSH connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcDevPortCfgTCPTimeout | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.85 | Integer32 (0..1800) | RO | ||||||||||||||||||
column · Integer32 (0..1800) · read-only · current The timeout (in seconds) for TCP connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcDevPortCfgCBCPClientType | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.86 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current When slcDevPortCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
| |||||||||||||||||||||
| CslcDevPortCfgCBCPServerAllowNoCallback | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.87 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled and slcDevPortCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation. | |||||||||||||||||||||
| CslcDevPortCfgDialbackDelay | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.88 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current When slcDevPortCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
| |||||||||||||||||||||
| CslcDevPortCfgUSBState | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.89 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, USB logging is enabled for the Device Port. This value will be undefined if the SLC does not have USB Ports. | |||||||||||||||||||||
| CslcDevPortCfgUSBLogTo | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.90 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current For USB logging, which USB port to use for logging. This value will be undefined if the SLC does not have USB Ports. | |||||||||||||||||||||
| CslcDevPortCfgUSBMaxFiles | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.91 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum number of files to use for USB logging. This value will be undefined if the SLC does not have USB Ports. | |||||||||||||||||||||
| CslcDevPortCfgUSBMaxSize | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.92 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum size of each file (in bytes) for USB logging. This value will be undefined if the SLC does not have USB Ports.
| |||||||||||||||||||||
| CslcDevPortCfgCHAPAuthLocalUsers | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.93 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem. | |||||||||||||||||||||
| CslcDevPortCfgUseSites | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.94 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem. | |||||||||||||||||||||
| CslcDevPortCfgDialbackRetries | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.95 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current When slcDevPortCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails. | |||||||||||||||||||||
| CslcDevPortCfgGroup | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.96 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The group or groups that may access the Device Port. | |||||||||||||||||||||
| CslcDevPortCfgIPMask | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.97 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The network mask associated with slcDevPortCfgIPMask. | |||||||||||||||||||||
| CslcDevPortCfgDevPrompt | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.98 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current If the device port is connected to a SLP or ServerTech CDU, specifies the prompt that is configured for the SLP or ServerTech CDU. This object is deprecated, and has been replaced by the RPM functionality. | |||||||||||||||||||||
| CslcDevPortCfgDevNumOutlets | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.99 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current If the device port is connected to a ServerTech CDU, specifies the number of outlets on the primary/master ServerTech unit. This object is deprecated, and has been replaced by the RPM functionality. | |||||||||||||||||||||
| CslcDevPortCfgDevNumExpOutlets | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.100 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current If the device port is connected to a ServerTech CDU, specifies the number of outlets on the expansion ServerTech unit. This object is deprecated, and has been replaced by the RPM functionality. | |||||||||||||||||||||
| CslcDevPortCfgReversePinout | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.101 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, swaps the positions of the serial lines, such that the direction of data or the signal is reversed. For instance, TX is swapped with RX. Enabling Reverse Pinout facilitates connections to Cisco and Sun style RS-45 console ports using a straight through Ethernet patch cable, without the need for a rolled cable or adapter. Note that all Lantronix serial adapters are intended to be used with Reverse Pinout disabled. | |||||||||||||||||||||
| CslcDevPortCfgUSBVBUS | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.102 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current For SLC8000 USB Device Ports only. If enabled, the USB VBUS signal provides power to the USB device attached to a device port. Disabling VBUS will power down the device as long as it is bus-powered instead of self-powered. | |||||||||||||||||||||
| CslcDevPortCfgAssertDTR | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.103 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current For RJ45 Device Ports only. By default, DTR is asserted on a device port nearly all of the time (except momentarily when a port is opened for operations). Unchecking this option will deassert DTR, simulating a cable disconnection for the device that is connected to a device port. | |||||||||||||||||||||
| CslcDevPortCfgPortType | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.104 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the connector type on the device port: RJ45 or USB.
| |||||||||||||||||||||
| CslcDevPortCfgTelnetTimeoutDataDirection | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.105 | TimeoutDataDirection | RO | ||||||||||||||||||
column · TimeoutDataDirection · read-only · current If slcDevPortCfgTelnetTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out. | |||||||||||||||||||||
| CslcDevPortCfgSSHTimeoutDataDirection | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.106 | TimeoutDataDirection | RO | ||||||||||||||||||
column · TimeoutDataDirection · read-only · current If slcDevPortCfgSSHTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out. | |||||||||||||||||||||
| CslcDevPortCfgTCPTimeoutDataDirection | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.107 | TimeoutDataDirection | RO | ||||||||||||||||||
column · TimeoutDataDirection · read-only · current If slcDevPortCfgTCPTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out. | |||||||||||||||||||||
| CslcDevPortCfgIdleTimeoutMessage | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.108 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, a message will be displayed to a user when their connection to a device port will be terminated soon due to the connection being idle. | |||||||||||||||||||||
| CslcDevPortCfgNumberOfSessionsMessage | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.109 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, a message will be displayed to a user when connecting to a device port that indicates how many users are currently connected to the device port. | |||||||||||||||||||||
| CslcDevPortCfgMinimizeLatency | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.110 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, device port latency will be minimized by reducing read delays. | |||||||||||||||||||||
| CslcDevPortCfgTelnetSoftIAC | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.111 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the Telnet server will not block waiting for the initial Telnet protocol IAC option responses. | |||||||||||||||||||||
| CslcDevPortCfgSendTermString | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.112 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, and a slcDevPortCfgTerminationString is defined, when a network connection to a device port is terminated, the termination string is sent to the device connected to the device port. The string should be defined so that it sends the the appropriate command(s) to the device to terminate any active user sessions. | |||||||||||||||||||||
| CslcDevPortCfgTerminationString | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.113 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The termination string sent to the device connected to the device port if slcDevPortCfgSendTermString is enabled. | |||||||||||||||||||||
| CslcDevPortCfgPowerManagementSeq | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.114 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The key sequence that displays the Power Management menu when a user is connected to a device port. | |||||||||||||||||||||
| CslcDevPortCfgPowerSupplies | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.115 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A string that describes the managed power supplies configured for the device port. A device port can have up to four power supplies that provide power for the device connected to the device port. The string is a comma separated list of power supplies formatted: '<Power Suppy Name>(RPM Id/Outlet Id)'. | |||||||||||||||||||||
| CslcDevPortCfgToggleDTR | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.116 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current Applies to RJ45 device ports only. If enabled, when a user disconnects from a device port, DTR will be toggled. This feature can be used when a serial connection requires DSR to be active for the attached device to connect. In this case, toggling DTR will end any active connection on the device. | |||||||||||||||||||||
| CslcDevPortCfgTokenAction | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.117 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For Token and Data Detection, a string containing one or more actions that will be performed if a data trigger occurs: syslog, email, trap, sendstring, powersupply. | |||||||||||||||||||||
| CslcDevPortCfgTokenSendString | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.118 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For Token and Data Detection (previously called 'Email Logging'), if the Send String action is enabled, this object defines the string to send to the device connected to the device port. | |||||||||||||||||||||
| CslcDevPortCfgTokenPowerSupply | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.119 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For Token and Data Detection (previously called 'Email Logging'), if the Control Power Supply action is enabled, this object defines the name of the managed power supply to perform an action on. This string can be 'all' for all managed power supplies associated with the device port, or an individual power supply name. | |||||||||||||||||||||
| CslcDevPortCfgTokenPowerAction | 1.3.6.1.4.1.244.1.1.4.2.2.2.1.120 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For Token and Data Detection (previously called 'Email Logging'), if the Control Power Supply action is enabled, this object defines the action to take on slcDevPortCfgTokenPowerSupply.
| |||||||||||||||||||||
| NslcDevPortState | 1.3.6.1.4.1.244.1.1.4.2.3 | ||||||||||||||||||||
| SslcDevPortStateNumber | 1.3.6.1.4.1.244.1.1.4.2.3.1 | Integer32 (8 | 16 | 24 | 32 | 40 | 48) | RO | ||||||||||||||||||
scalar · Integer32 (8 | 16 | 24 | 32 | 40 | 48) · read-only · current The number of entries in the Device Port State table. | |||||||||||||||||||||
| TslcDevPortStateTable | 1.3.6.1.4.1.244.1.1.4.2.3.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of Device Port state entries. The number of entries is given by the value of slcDevPortStateNumber. | |||||||||||||||||||||
| RslcDevPortStateEntry | 1.3.6.1.4.1.244.1.1.4.2.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing all state information for a Device Port.
| |||||||||||||||||||||
| CslcDevPortStateIndex | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.1 | Integer32 (1..48) | RO | ||||||||||||||||||
column · Integer32 (1..48) · read-only · current Reference index for each Device Port State entry. | |||||||||||||||||||||
| CslcDevPortStateBytesInput | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of bytes input to the Device Port since boot or the last time Device Port statistics were zeroed.
| |||||||||||||||||||||
| CslcDevPortStateBytesOutput | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of bytes output from the Device Port since boot or the last time Device Port statistics were zeroed.
| |||||||||||||||||||||
| CslcDevPortStateFramingErrors | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of framing errors for the Device Port since boot or the last time Device Port statistics were zeroed. | |||||||||||||||||||||
| CslcDevPortStateParityErrors | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of parity errors for the Device Port since boot or the last time Device Port statistics were zeroed. | |||||||||||||||||||||
| CslcDevPortStateOverrunErrors | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of overrun errors for the Device Port since boot or the last time Device Port statistics were zeroed. | |||||||||||||||||||||
| CslcDevPortStateFlowControlViolations | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of flow control violations for the Device Port since boot or the last time Device Port statistics were zeroed. | |||||||||||||||||||||
| CslcDevPortStateDSR | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.8 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Data Set Ready is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortStateDTR | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.9 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Data Terminal Ready is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortStateCTS | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.10 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Clear To Send is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortStateRTS | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.11 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Request To Send is enabled for the Device Port. | |||||||||||||||||||||
| CslcDevPortStateCD | 1.3.6.1.4.1.244.1.1.4.2.3.2.1.12 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Carrier Detect is enabled for the Device Port. | |||||||||||||||||||||
| NslcDevPCCard | 1.3.6.1.4.1.244.1.1.4.3 | ||||||||||||||||||||
| TslcPCCardCfgTable | 1.3.6.1.4.1.244.1.1.4.3.1 | NA | |||||||||||||||||||
table · not-accessible · current Table of PC Card configuration entries. There are two entries in the table, index (1) for the upper PC Card slot, and index (2) for the lower PC Card slot. This table will be empty if the SLC does not have PC Card slots. | |||||||||||||||||||||
| RslcPCCardCfgEntry | 1.3.6.1.4.1.244.1.1.4.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing all configuration settings for a PC Card Slot.
| |||||||||||||||||||||
| CslcPCCardCfgIndex | 1.3.6.1.4.1.244.1.1.4.3.1.1.1 | Integer32 (1..2) | RO | ||||||||||||||||||
column · Integer32 (1..2) · read-only · current Reference index for each PC Card Configuration entry. | |||||||||||||||||||||
| CslcPCCardCfgCardType | 1.3.6.1.4.1.244.1.1.4.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of PC Card in the slot.
| |||||||||||||||||||||
| CslcPCCardCfgCardId | 1.3.6.1.4.1.244.1.1.4.3.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The identifying string of the card in the slot. | |||||||||||||||||||||
| CslcPCCardCfgBaud | 1.3.6.1.4.1.244.1.1.4.3.1.1.4 | Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200) | RO | ||||||||||||||||||
column · Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200) · read-only · current For ISDN and modem cards, the baud rate. | |||||||||||||||||||||
| CslcPCCardCfgDataBits | 1.3.6.1.4.1.244.1.1.4.3.1.1.5 | Integer32 (7 | 8) | RO | ||||||||||||||||||
column · Integer32 (7 | 8) · read-only · current For ISDN and modem cards, the data bits. | |||||||||||||||||||||
| CslcPCCardCfgStopBits | 1.3.6.1.4.1.244.1.1.4.3.1.1.6 | Integer32 (1 | 2) | RO | ||||||||||||||||||
column · Integer32 (1 | 2) · read-only · current For ISDN and modem cards, the stop bits. | |||||||||||||||||||||
| CslcPCCardCfgParity | 1.3.6.1.4.1.244.1.1.4.3.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For ISDN and modem cards, the parity.
| |||||||||||||||||||||
| CslcPCCardCfgFlowControl | 1.3.6.1.4.1.244.1.1.4.3.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For ISDN and modem cards, the flow control.
| |||||||||||||||||||||
| CslcPCCardCfgModemState | 1.3.6.1.4.1.244.1.1.4.3.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For ISDN and modem cards, indicates how the modem will be used.
| |||||||||||||||||||||
| CslcPCCardCfgModemMode | 1.3.6.1.4.1.244.1.1.4.3.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For ISDN and modem cards, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
| |||||||||||||||||||||
| CslcPCCardCfgLocalIP | 1.3.6.1.4.1.244.1.1.4.3.1.1.11 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For PPP connections, the local IP Address (all zeros if it should be negotiated). | |||||||||||||||||||||
| CslcPCCardCfgRemoteIP | 1.3.6.1.4.1.244.1.1.4.3.1.1.12 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For PPP connections, the remote IP Address (all zeros if it should be negotiated). | |||||||||||||||||||||
| CslcPCCardCfgAuth | 1.3.6.1.4.1.244.1.1.4.3.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For PPP connections, the type of authentication to be used.
| |||||||||||||||||||||
| CslcPCCardCfgCHAPHost | 1.3.6.1.4.1.244.1.1.4.3.1.1.14 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use. | |||||||||||||||||||||
| CslcPCCardCfgInitScript | 1.3.6.1.4.1.244.1.1.4.3.1.1.15 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The initialization script for an external modem. | |||||||||||||||||||||
| CslcPCCardCfgTimeout | 1.3.6.1.4.1.244.1.1.4.3.1.1.16 | Integer32 (0..30) | RO | ||||||||||||||||||
column · Integer32 (0..30) · read-only · current The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcPCCardCfgDialoutNum | 1.3.6.1.4.1.244.1.1.4.3.1.1.17 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number to use for dial-out connections. | |||||||||||||||||||||
| CslcPCCardCfgDialoutLogin | 1.3.6.1.4.1.244.1.1.4.3.1.1.18 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current The login to use for dial-out connections. | |||||||||||||||||||||
| CslcPCCardCfgDialbackMode | 1.3.6.1.4.1.244.1.1.4.3.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
| |||||||||||||||||||||
| CslcPCCardCfgDialbackNum | 1.3.6.1.4.1.244.1.1.4.3.1.1.20 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number to use for dial-back connections. | |||||||||||||||||||||
| CslcPCCardCfgNATState | 1.3.6.1.4.1.244.1.1.4.3.1.1.21 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2. | |||||||||||||||||||||
| CslcPCCardCfgStorageFS | 1.3.6.1.4.1.244.1.1.4.3.1.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For storage cards, the type of filesystem on the card.
| |||||||||||||||||||||
| CslcPCCardCfgISDNChannel | 1.3.6.1.4.1.244.1.1.4.3.1.1.23 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The channel on the ISDN card to use, either 1 or 2. | |||||||||||||||||||||
| CslcPCCardCfgISDNChannelNum | 1.3.6.1.4.1.244.1.1.4.3.1.1.24 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number associated with the selected ISDN channel. | |||||||||||||||||||||
| CslcPCCardCfgTelnetState | 1.3.6.1.4.1.244.1.1.4.3.1.1.25 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Telnet connections to the modem/ISDN PC Card are allowed. | |||||||||||||||||||||
| CslcPCCardCfgTelnetPort | 1.3.6.1.4.1.244.1.1.4.3.1.1.26 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for Telnet connections directly to the modem/ISDN PC Card. | |||||||||||||||||||||
| CslcPCCardCfgTelnetAuth | 1.3.6.1.4.1.244.1.1.4.3.1.1.27 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access the modem/ISDN PC Card with Telnet. | |||||||||||||||||||||
| CslcPCCardCfgSSHState | 1.3.6.1.4.1.244.1.1.4.3.1.1.28 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, SSH connections to the modem/ISDN PC Card are allowed. | |||||||||||||||||||||
| CslcPCCardCfgSSHPort | 1.3.6.1.4.1.244.1.1.4.3.1.1.29 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for SSH connections directly to the modem/ISDN PC Card. | |||||||||||||||||||||
| CslcPCCardCfgSSHAuth | 1.3.6.1.4.1.244.1.1.4.3.1.1.30 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access the modem/ISDN PC Card with SSH. | |||||||||||||||||||||
| CslcPCCardCfgTCPState | 1.3.6.1.4.1.244.1.1.4.3.1.1.31 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, TCP connections to the modem/ISDN PC Card are allowed. | |||||||||||||||||||||
| CslcPCCardCfgTCPPort | 1.3.6.1.4.1.244.1.1.4.3.1.1.32 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for TCP connections directly to the modem/ISDN PC Card. | |||||||||||||||||||||
| CslcPCCardCfgTCPAuth | 1.3.6.1.4.1.244.1.1.4.3.1.1.33 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access the modem/ISDN PC Card with TCP. | |||||||||||||||||||||
| CslcPCCardCfgGSMPIN | 1.3.6.1.4.1.244.1.1.4.3.1.1.34 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The PIN associated with the GSM/GPRS PC Card modem. | |||||||||||||||||||||
| CslcPCCardCfgGSMNetworkName | 1.3.6.1.4.1.244.1.1.4.3.1.1.35 | OCTET STRING | RO | obsolete | |||||||||||||||||
column · OCTET STRING · read-only · obsolete The Network Name associated with the GSM/GPRS PC Card modem. | |||||||||||||||||||||
| CslcPCCardCfgGSMPPPCompression | 1.3.6.1.4.1.244.1.1.4.3.1.1.36 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, PPP compression is enabled for GSM/GPRS PC Card modem connections. | |||||||||||||||||||||
| CslcPCCardCfgGSMAutoAcquireDNS | 1.3.6.1.4.1.244.1.1.4.3.1.1.37 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, DNS servers will be acquired vi GSM/GPRS PC Card modem PPP connections. | |||||||||||||||||||||
| CslcPCCardCfgGSMDialoutMode | 1.3.6.1.4.1.244.1.1.4.3.1.1.38 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mode to be used for GSM/GPRS PC Card modems configured for dialout.
| |||||||||||||||||||||
| CslcPCCardCfgGSMContextID | 1.3.6.1.4.1.244.1.1.4.3.1.1.39 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Context Id string used for GSM/GPRS PC Card modems configured for GPRS dialout mode. | |||||||||||||||||||||
| CslcPCCardCfgGSMBearerService | 1.3.6.1.4.1.244.1.1.4.3.1.1.40 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Bearer Service Type string used for GSM/GPRS PC Card modems configured for GSM dialin/dialout mode. | |||||||||||||||||||||
| CslcPCCardCfgIdleTimeout | 1.3.6.1.4.1.244.1.1.4.3.1.1.41 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled. | |||||||||||||||||||||
| CslcPCCardCfgRestartDelay | 1.3.6.1.4.1.244.1.1.4.3.1.1.42 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
| |||||||||||||||||||||
| CslcPCCardCfgCallerIdLogging | 1.3.6.1.4.1.244.1.1.4.3.1.1.43 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, caller id logging is enabled for a modem dial-in connection. | |||||||||||||||||||||
| CslcPCCardCfgCallerIdATCmd | 1.3.6.1.4.1.244.1.1.4.3.1.1.44 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The modem AT command required to initiate caller id logging by the modem. | |||||||||||||||||||||
| CslcPCCardCfgDODAuth | 1.3.6.1.4.1.244.1.1.4.3.1.1.45 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
| |||||||||||||||||||||
| CslcPCCardCfgDODCHAPHost | 1.3.6.1.4.1.244.1.1.4.3.1.1.46 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use. | |||||||||||||||||||||
| CslcPCCardCfgHostList | 1.3.6.1.4.1.244.1.1.4.3.1.1.47 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current When slcPCCardCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in. | |||||||||||||||||||||
| CslcPCCardCfgCBCPClientType | 1.3.6.1.4.1.244.1.1.4.3.1.1.48 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current When slcPCCardCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
| |||||||||||||||||||||
| CslcPCCardCfgCBCPServerAllowNoCallback | 1.3.6.1.4.1.244.1.1.4.3.1.1.49 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled and slcPCCardCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation. | |||||||||||||||||||||
| CslcPCCardCfgDialbackDelay | 1.3.6.1.4.1.244.1.1.4.3.1.1.50 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current When slcPCCardCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
| |||||||||||||||||||||
| CslcPCCardCfgCHAPAuthLocalUsers | 1.3.6.1.4.1.244.1.1.4.3.1.1.51 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem. | |||||||||||||||||||||
| CslcPCCardCfgUseSites | 1.3.6.1.4.1.244.1.1.4.3.1.1.52 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem. | |||||||||||||||||||||
| CslcPCCardCfgDialbackRetries | 1.3.6.1.4.1.244.1.1.4.3.1.1.53 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current When slcPCCardCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails. | |||||||||||||||||||||
| CslcPCCardCfgGroup | 1.3.6.1.4.1.244.1.1.4.3.1.1.54 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The group or groups that may access the PC Card slot. | |||||||||||||||||||||
| NslcDevPowerSupply | 1.3.6.1.4.1.244.1.1.4.4 | ||||||||||||||||||||
| SslcDevPowerSupplyType | 1.3.6.1.4.1.244.1.1.4.4.1 | INTEGER | RO | acTwoPowerSupplies(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The type of power supply for the SLC.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcDevPowerSupplyA | 1.3.6.1.4.1.244.1.1.4.4.2 | INTEGER | RO | up(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The status of Power Supply A.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcDevPowerSupplyB | 1.3.6.1.4.1.244.1.1.4.4.3 | INTEGER | RO | down(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The status of Power Supply B.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NslcDevUSB | 1.3.6.1.4.1.244.1.1.4.5 | ||||||||||||||||||||
| SslcDevUSBState | 1.3.6.1.4.1.244.1.1.4.5.1 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the USB devices connected to the SLC will be accessible. This value will be undefined if the SLC does not have USB Ports. | |||||||||||||||||||||
| TslcDevUSBCfgTable | 1.3.6.1.4.1.244.1.1.4.5.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of USB configuration entries. There is one entry in the table, index (1) for USB port 1. This table will be empty if the SLC does not have USB Ports. | |||||||||||||||||||||
| RslcDevUSBCfgEntry | 1.3.6.1.4.1.244.1.1.4.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing all configuration settings for a USB port.
| |||||||||||||||||||||
| CslcDevUSBId | 1.3.6.1.4.1.244.1.1.4.5.2.1.1 | Integer32 (1) | RO | ||||||||||||||||||
column · Integer32 (1) · read-only · current The identifier for a USB Port (1 indicates USB Port U1). | |||||||||||||||||||||
| CslcDevUSBCfgCardType | 1.3.6.1.4.1.244.1.1.4.5.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of USB device in the port.
| |||||||||||||||||||||
| CslcDevUSBCfgCardId | 1.3.6.1.4.1.244.1.1.4.5.2.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The identifying string of the device in the port. | |||||||||||||||||||||
| CslcDevUSBCfgStorageFS | 1.3.6.1.4.1.244.1.1.4.5.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For thumb drives, the type of filesystem on the card.
| |||||||||||||||||||||
| CslcDevUSBCfgBaud | 1.3.6.1.4.1.244.1.1.4.5.2.1.5 | Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200) | RO | ||||||||||||||||||
column · Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200) · read-only · current For modem cards, the baud rate. | |||||||||||||||||||||
| CslcDevUSBCfgDataBits | 1.3.6.1.4.1.244.1.1.4.5.2.1.6 | Integer32 (7 | 8) | RO | ||||||||||||||||||
column · Integer32 (7 | 8) · read-only · current For modem cards, the data bits. | |||||||||||||||||||||
| CslcDevUSBCfgStopBits | 1.3.6.1.4.1.244.1.1.4.5.2.1.7 | Integer32 (1 | 2) | RO | ||||||||||||||||||
column · Integer32 (1 | 2) · read-only · current For modem cards, the stop bits. | |||||||||||||||||||||
| CslcDevUSBCfgParity | 1.3.6.1.4.1.244.1.1.4.5.2.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For modem cards, the parity.
| |||||||||||||||||||||
| CslcDevUSBCfgFlowControl | 1.3.6.1.4.1.244.1.1.4.5.2.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For modem cards, the flow control.
| |||||||||||||||||||||
| CslcDevUSBCfgModemState | 1.3.6.1.4.1.244.1.1.4.5.2.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For modem cards, indicates how the modem will be used.
| |||||||||||||||||||||
| CslcDevUSBCfgModemMode | 1.3.6.1.4.1.244.1.1.4.5.2.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For modem cards, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
| |||||||||||||||||||||
| CslcDevUSBCfgLocalIP | 1.3.6.1.4.1.244.1.1.4.5.2.1.12 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For PPP connections, the local IP Address (all zeros if it should be negotiated). | |||||||||||||||||||||
| CslcDevUSBCfgRemoteIP | 1.3.6.1.4.1.244.1.1.4.5.2.1.13 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For PPP connections, the remote IP Address (all zeros if it should be negotiated). | |||||||||||||||||||||
| CslcDevUSBCfgAuth | 1.3.6.1.4.1.244.1.1.4.5.2.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For PPP connections, the type of authentication to be used.
| |||||||||||||||||||||
| CslcDevUSBCfgCHAPHost | 1.3.6.1.4.1.244.1.1.4.5.2.1.15 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use. | |||||||||||||||||||||
| CslcDevUSBCfgDODAuth | 1.3.6.1.4.1.244.1.1.4.5.2.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
| |||||||||||||||||||||
| CslcDevUSBCfgDODCHAPHost | 1.3.6.1.4.1.244.1.1.4.5.2.1.17 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use. | |||||||||||||||||||||
| CslcDevUSBCfgInitScript | 1.3.6.1.4.1.244.1.1.4.5.2.1.18 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The initialization script for a modem. | |||||||||||||||||||||
| CslcDevUSBCfgTimeout | 1.3.6.1.4.1.244.1.1.4.5.2.1.19 | Integer32 (0..30) | RO | ||||||||||||||||||
column · Integer32 (0..30) · read-only · current The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcDevUSBCfgDialoutNum | 1.3.6.1.4.1.244.1.1.4.5.2.1.20 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number to use for dial-out connections. | |||||||||||||||||||||
| CslcDevUSBCfgDialoutLogin | 1.3.6.1.4.1.244.1.1.4.5.2.1.21 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current The login to use for dial-out connections. | |||||||||||||||||||||
| CslcDevUSBCfgDialbackMode | 1.3.6.1.4.1.244.1.1.4.5.2.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
| |||||||||||||||||||||
| CslcDevUSBCfgDialbackNum | 1.3.6.1.4.1.244.1.1.4.5.2.1.23 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The phone number to use for dial-back connections. | |||||||||||||||||||||
| CslcDevUSBCfgDialbackDelay | 1.3.6.1.4.1.244.1.1.4.5.2.1.24 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current When slcDevUSBCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
| |||||||||||||||||||||
| CslcDevUSBCfgNATState | 1.3.6.1.4.1.244.1.1.4.5.2.1.25 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2. | |||||||||||||||||||||
| CslcDevUSBCfgIdleTimeout | 1.3.6.1.4.1.244.1.1.4.5.2.1.26 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| CslcDevUSBCfgRestartDelay | 1.3.6.1.4.1.244.1.1.4.5.2.1.27 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
| |||||||||||||||||||||
| CslcDevUSBCfgCallerIdLogging | 1.3.6.1.4.1.244.1.1.4.5.2.1.28 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, caller id logging is enabled for a modem dial-in connection. | |||||||||||||||||||||
| CslcDevUSBCfgCallerIdATCmd | 1.3.6.1.4.1.244.1.1.4.5.2.1.29 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The modem AT command required to initiate caller id logging by the modem. | |||||||||||||||||||||
| CslcDevUSBCfgHostList | 1.3.6.1.4.1.244.1.1.4.5.2.1.30 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current When slcDevUSBCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in. | |||||||||||||||||||||
| CslcDevUSBCfgCBCPClientType | 1.3.6.1.4.1.244.1.1.4.5.2.1.31 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current When slcDevUSBCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
| |||||||||||||||||||||
| CslcDevUSBCfgCBCPServerAllowNoCallback | 1.3.6.1.4.1.244.1.1.4.5.2.1.32 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled and slcDevUSBCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation. | |||||||||||||||||||||
| CslcDevUSBCfgTelnetState | 1.3.6.1.4.1.244.1.1.4.5.2.1.33 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, Telnet connections to the USB modem are allowed. | |||||||||||||||||||||
| CslcDevUSBCfgTelnetPort | 1.3.6.1.4.1.244.1.1.4.5.2.1.34 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for Telnet connections directly to the USB modem. | |||||||||||||||||||||
| CslcDevUSBCfgTelnetAuth | 1.3.6.1.4.1.244.1.1.4.5.2.1.35 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access the USB modem with Telnet. | |||||||||||||||||||||
| CslcDevUSBCfgSSHState | 1.3.6.1.4.1.244.1.1.4.5.2.1.36 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, SSH connections to the USB modem are allowed. | |||||||||||||||||||||
| CslcDevUSBCfgSSHPort | 1.3.6.1.4.1.244.1.1.4.5.2.1.37 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for SSH connections directly to the USB modem. | |||||||||||||||||||||
| CslcDevUSBCfgSSHAuth | 1.3.6.1.4.1.244.1.1.4.5.2.1.38 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access the USB modem with SSH. | |||||||||||||||||||||
| CslcDevUSBCfgTCPState | 1.3.6.1.4.1.244.1.1.4.5.2.1.39 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, TCP connections to the USB modem are allowed. | |||||||||||||||||||||
| CslcDevUSBCfgTCPPort | 1.3.6.1.4.1.244.1.1.4.5.2.1.40 | Integer32 (1025..65535) | RO | ||||||||||||||||||
column · Integer32 (1025..65535) · read-only · current TCP Port number for TCP connections directly to the USB modem. | |||||||||||||||||||||
| CslcDevUSBCfgTCPAuth | 1.3.6.1.4.1.244.1.1.4.5.2.1.41 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the user is required to authenticate to access the USB modem with TCP. | |||||||||||||||||||||
| CslcDevUSBCfgGSMPIN | 1.3.6.1.4.1.244.1.1.4.5.2.1.42 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The PIN associated with the GSM/GPRS modem. | |||||||||||||||||||||
| CslcDevUSBCfgGSMPPPCompression | 1.3.6.1.4.1.244.1.1.4.5.2.1.43 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, PPP compression is enabled GSM/GPRS modem connections. | |||||||||||||||||||||
| CslcDevUSBCfgGSMAutoAcquireDNS | 1.3.6.1.4.1.244.1.1.4.5.2.1.44 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, DNS servers will be acquired vi GSM/GPRS modem PPP connections. | |||||||||||||||||||||
| CslcDevUSBCfgGSMDialoutMode | 1.3.6.1.4.1.244.1.1.4.5.2.1.45 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mode to be used for GSM/GPRS modems configured for dialout.
| |||||||||||||||||||||
| CslcDevUSBCfgGSMContextID | 1.3.6.1.4.1.244.1.1.4.5.2.1.46 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Context Id string used for GSM/GPRS modems configured for GPRS dialout mode. | |||||||||||||||||||||
| CslcDevUSBCfgGSMBearerService | 1.3.6.1.4.1.244.1.1.4.5.2.1.47 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The Bearer Service Type string used for GSM/GPRS modems configured for GSM dialin/dialout mode. | |||||||||||||||||||||
| CslcDevUSBCfgCHAPAuthLocalUsers | 1.3.6.1.4.1.244.1.1.4.5.2.1.48 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem. | |||||||||||||||||||||
| CslcDevUSBCfgUseSites | 1.3.6.1.4.1.244.1.1.4.5.2.1.49 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem. | |||||||||||||||||||||
| CslcDevUSBCfgDialbackRetries | 1.3.6.1.4.1.244.1.1.4.5.2.1.50 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current When slcDevUSBCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails. | |||||||||||||||||||||
| CslcDevUSBCfgDialtoneCheck | 1.3.6.1.4.1.244.1.1.4.5.2.1.51 | Integer32 (0..600) | RO | ||||||||||||||||||
column · Integer32 (0..600) · read-only · current The time (in minutes) between checks for a modem dialtone. A value of 0 indicates that dialtone checks are disabled.
| |||||||||||||||||||||
| CslcDevUSBCfgGroup | 1.3.6.1.4.1.244.1.1.4.5.2.1.52 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The group or groups that may access the USB port. | |||||||||||||||||||||
| NslcDevIntModem | 1.3.6.1.4.1.244.1.1.4.6 | ||||||||||||||||||||
| SslcDevIntModemModemState | 1.3.6.1.4.1.244.1.1.4.6.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current For the SLC internal modem, indicates how the modem will be used.
| |||||||||||||||||||||
| SslcDevIntModemModemMode | 1.3.6.1.4.1.244.1.1.4.6.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current For the SLC internal modem, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
| |||||||||||||||||||||
| SslcDevIntModemLocalIP | 1.3.6.1.4.1.244.1.1.4.6.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current For PPP connections, the local IP Address - all zeros if it should be negotiated. | |||||||||||||||||||||
| SslcDevIntModemRemoteIP | 1.3.6.1.4.1.244.1.1.4.6.4 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current For PPP connections, the remote IP Address - all zeros if it should be negotiated. | |||||||||||||||||||||
| SslcDevIntModemAuth | 1.3.6.1.4.1.244.1.1.4.6.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current For PPP connections, the type of authentication to be used.
| |||||||||||||||||||||
| SslcDevIntModemCHAPHost | 1.3.6.1.4.1.244.1.1.4.6.6 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use. | |||||||||||||||||||||
| SslcDevIntModemInitScript | 1.3.6.1.4.1.244.1.1.4.6.7 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The initialization script for an internal modem. | |||||||||||||||||||||
| SslcDevIntModemTimeout | 1.3.6.1.4.1.244.1.1.4.6.8 | Integer32 (0..30) | RO | ||||||||||||||||||
scalar · Integer32 (0..30) · read-only · current The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| SslcDevIntModemDialoutNum | 1.3.6.1.4.1.244.1.1.4.6.9 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The phone number to use for dial-out connections. | |||||||||||||||||||||
| SslcDevIntModemDialoutLogin | 1.3.6.1.4.1.244.1.1.4.6.10 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-only · current The login to use for dial-out connections. | |||||||||||||||||||||
| SslcDevIntModemDialbackMode | 1.3.6.1.4.1.244.1.1.4.6.11 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the internal modem.
| |||||||||||||||||||||
| SslcDevIntModemDialbackNum | 1.3.6.1.4.1.244.1.1.4.6.12 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The phone number to use for dial-back connections. | |||||||||||||||||||||
| SslcDevIntModemDialbackRetries | 1.3.6.1.4.1.244.1.1.4.6.13 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current When slcDevIntModemModemState is set to dialback, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails. | |||||||||||||||||||||
| SslcDevIntModemDialbackDelay | 1.3.6.1.4.1.244.1.1.4.6.14 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current When slcDevIntModemModemState is set to dialback, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
| |||||||||||||||||||||
| SslcDevIntModemCallerIdLogging | 1.3.6.1.4.1.244.1.1.4.6.15 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, caller id logging is enabled for a modem dial-in connection. | |||||||||||||||||||||
| SslcDevIntModemCallerIdATCmd | 1.3.6.1.4.1.244.1.1.4.6.16 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The modem AT command required to initiate caller id logging by the modem. | |||||||||||||||||||||
| SslcDevIntModemUseSites | 1.3.6.1.4.1.244.1.1.4.6.17 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem. | |||||||||||||||||||||
| SslcDevIntModemGroup | 1.3.6.1.4.1.244.1.1.4.6.18 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The group or groups that may access the internal modem connection. | |||||||||||||||||||||
| SslcDevIntModemIdleTimeout | 1.3.6.1.4.1.244.1.1.4.6.19 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
| |||||||||||||||||||||
| SslcDevIntModemRestartDelay | 1.3.6.1.4.1.244.1.1.4.6.20 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
| |||||||||||||||||||||
| SslcDevIntModemNATState | 1.3.6.1.4.1.244.1.1.4.6.21 | EnabledState | RO | ||||||||||||||||||
scalar · EnabledState · read-only · current If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2. | |||||||||||||||||||||
| SslcDevIntModemDialtoneCheck | 1.3.6.1.4.1.244.1.1.4.6.22 | Integer32 (0..600) | RO | ||||||||||||||||||
scalar · Integer32 (0..600) · read-only · current The time (in minutes) between checks for a modem dialtone. A value of 0 indicates that dialtone checks are disabled.
| |||||||||||||||||||||
| NslcDevRPM | 1.3.6.1.4.1.244.1.1.4.7 | ||||||||||||||||||||
| TslcDevRPMCfgTable | 1.3.6.1.4.1.244.1.1.4.7.1 | NA | |||||||||||||||||||
table · not-accessible · current Table of RPM configuration entries. | |||||||||||||||||||||
| RslcDevRPMCfgEntry | 1.3.6.1.4.1.244.1.1.4.7.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing all configuration settings for an RPM, as well as some top level status information for the RPM.
| |||||||||||||||||||||
| CslcDevRPMId | 1.3.6.1.4.1.244.1.1.4.7.1.1.1 | Integer32 (1..100) | RO | ||||||||||||||||||
column · Integer32 (1..100) · read-only · current The unique identifier for an RPM device. | |||||||||||||||||||||
| CslcDevRPMName | 1.3.6.1.4.1.244.1.1.4.7.1.1.2 | OCTET STRING (SIZE (1..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..20)) · read-only · current The name of the RPM. | |||||||||||||||||||||
| CslcDevRPMVendorModel | 1.3.6.1.4.1.244.1.1.4.7.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The manufacture and model of the RPM. | |||||||||||||||||||||
| CslcDevRPMManagedVia | 1.3.6.1.4.1.244.1.1.4.7.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The method of control for managing the RPM.
| |||||||||||||||||||||
| CslcDevRPMIPAddress | 1.3.6.1.4.1.244.1.1.4.7.1.1.5 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For SNMP and network managed RPMs, the IP Address of the RPM. | |||||||||||||||||||||
| CslcDevRPMPort | 1.3.6.1.4.1.244.1.1.4.7.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current For network managed RPMs, the TCP port to use to connect to the RPM. For USB managed RPMs, the USB port the device is connected to (0 indicates a port on the front of the SLC). For serially managed RPMs, the RJ45 device port the device is connected to. | |||||||||||||||||||||
| CslcDevRPMDriverOpts | 1.3.6.1.4.1.244.1.1.4.7.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Any driver options that are configured for the RPM. This option is mostly used for the USB vendor and product id. | |||||||||||||||||||||
| CslcDevRPMStatus | 1.3.6.1.4.1.244.1.1.4.7.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The current status for the RPM; for example, 'OL' to indicate 'Online' for a UPS. This object may be blank if the device does not report a status, or if the device is not in an error state. | |||||||||||||||||||||
| CslcDevRPMFirmwareVersion | 1.3.6.1.4.1.244.1.1.4.7.1.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The current firmware version of the RPM. This object may be blank if the device does not report its firmware version. | |||||||||||||||||||||
| CslcDevRPMSerialNumber | 1.3.6.1.4.1.244.1.1.4.7.1.1.10 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The serial number of the RPM. This object may be blank if the device does not report its serial number. | |||||||||||||||||||||
| CslcDevRPMMACAddress | 1.3.6.1.4.1.244.1.1.4.7.1.1.11 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The hardware address of the ethernet port of the RPM. This object may be blank if the device does not report its MAC address. | |||||||||||||||||||||
| CslcDevRPMNumOutlets | 1.3.6.1.4.1.244.1.1.4.7.1.1.12 | Integer32 (0..120) | RO | ||||||||||||||||||
column · Integer32 (0..120) · read-only · current The number of power outlets that the RPM has. | |||||||||||||||||||||
| CslcDevRPMOutletsOn | 1.3.6.1.4.1.244.1.1.4.7.1.1.13 | Integer32 (-1..120) | RO | ||||||||||||||||||
column · Integer32 (-1..120) · read-only · current The number of RPM outlets that are currently turned on. A negative value indicates that the RPM does not report how many outlets are turned on. | |||||||||||||||||||||
| CslcDevRPMSNMPReadComm | 1.3.6.1.4.1.244.1.1.4.7.1.1.14 | OCTET STRING (SIZE (1..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..20)) · read-only · current For SNMP managed RPMs, the SNMP read (get) community. | |||||||||||||||||||||
| CslcDevRPMAdminLogin | 1.3.6.1.4.1.244.1.1.4.7.1.1.15 | OCTET STRING (SIZE (1..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..20)) · read-only · current For serial or network managed RPMs, the administrator login. | |||||||||||||||||||||
| CslcDevRPMLogStatus | 1.3.6.1.4.1.244.1.1.4.7.1.1.16 | Integer32 (0..60) | RO | ||||||||||||||||||
column · Integer32 (0..60) · read-only · current Indicates how frequently the status for the RPM is logged. A value of 0 indicates that logging is disabled.
| |||||||||||||||||||||
| CslcDevRPMCriticalSNMPTraps | 1.3.6.1.4.1.244.1.1.4.7.1.1.17 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, indicates that the slcEventRPMAction trap will be sent for critical events for the RPM. | |||||||||||||||||||||
| CslcDevRPMCriticalEmails | 1.3.6.1.4.1.244.1.1.4.7.1.1.18 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current An email address to send emails to for critical events for the RPM. | |||||||||||||||||||||
| CslcDevRPMProvidesSLCPower | 1.3.6.1.4.1.244.1.1.4.7.1.1.19 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, indicates that the RPM provides power to the SLC. | |||||||||||||||||||||
| CslcDevRPMOnLowBattery | 1.3.6.1.4.1.244.1.1.4.7.1.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the action taken when a UPS is on battery and reaches a 'low battery' state. Applies to UPS devices only.
| |||||||||||||||||||||
| CslcDevRPMShutdownOrder | 1.3.6.1.4.1.244.1.1.4.7.1.1.21 | Integer32 (0..50) | RO | ||||||||||||||||||
column · Integer32 (0..50) · read-only · current If a UPS reaches a 'low battery' state and its slcDevRPMOnLowBattery setting is shutdownAllUPS, this indicates the order in which this RPM will be shutdown as all UPSes are shutdown. All UPSes with a shutdown order of '1' will be shutdown first, followed by all UPSes with a shutdown order of '2', etc. Shutdown orders are in the range of 1 to 49, with 50 being reserved for UPSes that provide power to the SLC - they will always be shutdown last. A value of 0 indicates that this UPS will not be shutdown. Applies to UPS devices only. | |||||||||||||||||||||
| CslcDevRPMLoad | 1.3.6.1.4.1.244.1.1.4.7.1.1.22 | Integer32 (-1..1000) | RO | ||||||||||||||||||
column · Integer32 (-1..1000) · read-only · current The current load of the RPM expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report load values.
| |||||||||||||||||||||
| CslcDevRPMLoadOverThreshold | 1.3.6.1.4.1.244.1.1.4.7.1.1.23 | Integer32 (-1..1000) | RO | ||||||||||||||||||
column · Integer32 (-1..1000) · read-only · current The load when the RPM switches to an overload condition, expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report over load threshold values.
| |||||||||||||||||||||
| CslcDevRPMBatteryCharge | 1.3.6.1.4.1.244.1.1.4.7.1.1.24 | Integer32 (-1..1000) | RO | ||||||||||||||||||
column · Integer32 (-1..1000) · read-only · current The current battery charge for the the RPM, expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report battery charge values.
| |||||||||||||||||||||
| CslcDevRPMBatteryRuntime | 1.3.6.1.4.1.244.1.1.4.7.1.1.25 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The number of seconds in the RPM remaining battery life. A value of 0 indicates that the RPM does not report battery runtime values.
| |||||||||||||||||||||
| CslcDevRPMBeeperStatus | 1.3.6.1.4.1.244.1.1.4.7.1.1.26 | EnabledState | RO | ||||||||||||||||||
column · EnabledState · read-only · current If enabled, indicates that the RPM beeper is enabled. A value of 0 indicates that the RPM does not report beeper status. | |||||||||||||||||||||
| CslcDevRPMTemperature | 1.3.6.1.4.1.244.1.1.4.7.1.1.27 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The internal temperature of the RPM, given in Celsius. A value of less than or equal to zero indicates that the RPM does not report temperature values.
| |||||||||||||||||||||
| CslcDevRPMUptime | 1.3.6.1.4.1.244.1.1.4.7.1.1.28 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The number of seconds the RPM has been up. A value of 0 indicates that the RPM does not report uptime values.
| |||||||||||||||||||||
| TslcDevRPMStatusTable | 1.3.6.1.4.1.244.1.1.4.7.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of RPM status entries. | |||||||||||||||||||||
| RslcDevRPMStatusEntry | 1.3.6.1.4.1.244.1.1.4.7.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing status information for an RPM. The SLC supports up to two towers or units per RPM.
| |||||||||||||||||||||
| CslcDevRPMCurrent | 1.3.6.1.4.1.244.1.1.4.7.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total current level, in tenths of Amps, for all outlets, on a given RPM tower or unit. If the value is negative, the RPM does not report current for the tower or unit.
| |||||||||||||||||||||
| CslcDevRPMInputVoltage | 1.3.6.1.4.1.244.1.1.4.7.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The input voltage, in tenths of Volts, on a given RPM tower or unit. If the value is negative, the RPM does not report input voltage for the tower or unit.
| |||||||||||||||||||||
| CslcDevRPMApparentPower | 1.3.6.1.4.1.244.1.1.4.7.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The apparent power, in tenths of Volt-Amps, on a given RPM tower or unit. If the value is negative, the RPM does not report apparent power for the tower or unit.
| |||||||||||||||||||||
| CslcDevRPMNominalApparentPower | 1.3.6.1.4.1.244.1.1.4.7.2.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The nominal apparent power, in tenths of Volt-Amps, on a given RPM tower or unit. If the value is negative, the RPM does not report nominal apparent power for the tower or unit.
| |||||||||||||||||||||
| CslcDevRPMRealPower | 1.3.6.1.4.1.244.1.1.4.7.2.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The real power, in tenths of Watts, on a given RPM tower or unit. If the value is negative, the RPM does not report real power for the tower or unit.
| |||||||||||||||||||||
| CslcDevRPMNominalRealPower | 1.3.6.1.4.1.244.1.1.4.7.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The nominal real power, in tenths of Watts, on a given RPM tower or unit. If the value is negative, the RPM does not report nominal real power for the tower or unit.
| |||||||||||||||||||||
| TslcDevRPMOutletTable | 1.3.6.1.4.1.244.1.1.4.7.3 | NA | |||||||||||||||||||
table · not-accessible · current Table of RPM outlet status and control entries. | |||||||||||||||||||||
| RslcDevRPMOutletEntry | 1.3.6.1.4.1.244.1.1.4.7.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing status and control for outlets on an RPM.
| |||||||||||||||||||||
| CslcDevRPMOutletName | 1.3.6.1.4.1.244.1.1.4.7.3.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The current name of the RPM outlet. This will be blank if the RPM device does not report outlet names. | |||||||||||||||||||||
| CslcDevRPMOutletState | 1.3.6.1.4.1.244.1.1.4.7.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of the RPM outlet.
| |||||||||||||||||||||
| CslcDevRPMOutletCurrent | 1.3.6.1.4.1.244.1.1.4.7.3.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current level, in tenths of Amps, for the RPM outlet. This will be negative if the RPM does not report current values for the outlet.
| |||||||||||||||||||||
| CslcDevRPMOutletAction | 1.3.6.1.4.1.244.1.1.4.7.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Performs an action to change the state of an outlet on an RPM. A read of this object always returns the value noAction(1). If the RPM supports individual outlet control, a command will be sent to the RPM to change the outlet state. Requests for invalid outlets or RPMs that do not support individual outlet control will return an error.
| |||||||||||||||||||||
| NslcConnections | 1.3.6.1.4.1.244.1.1.5 | ||||||||||||||||||||
| SslcConnNumber | 1.3.6.1.4.1.244.1.1.5.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of entries in the Connections table. | |||||||||||||||||||||
| TslcConnTable | 1.3.6.1.4.1.244.1.1.5.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of connection entries. The number of entries is given by the value of slcConnNumber. | |||||||||||||||||||||
| RslcConnEntry | 1.3.6.1.4.1.244.1.1.5.2.1 | NA | |||||||||||||||||||
| CslcConnIndex | 1.3.6.1.4.1.244.1.1.5.2.1.1 | Integer32 (1..512) | RO | ||||||||||||||||||
column · Integer32 (1..512) · read-only · current Reference index for each connection. | |||||||||||||||||||||
| CslcConnEndPt1 | 1.3.6.1.4.1.244.1.1.5.2.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A description of one of the end points of the connection. | |||||||||||||||||||||
| CslcConnEndPt2 | 1.3.6.1.4.1.244.1.1.5.2.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A description of one of the end points of the connection. | |||||||||||||||||||||
| CslcConnFlow | 1.3.6.1.4.1.244.1.1.5.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The direction that data is flowing in the connection.
| |||||||||||||||||||||
| CslcConnUser | 1.3.6.1.4.1.244.1.1.5.2.1.5 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current The user that initiated the connection. | |||||||||||||||||||||
| CslcConnDuration | 1.3.6.1.4.1.244.1.1.5.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The duration, in seconds, that the connection has existed.
| |||||||||||||||||||||
| CslcConnDurationStr | 1.3.6.1.4.1.244.1.1.5.2.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The duration, formatted in hours:minutes:seconds, that the connection has existed. | |||||||||||||||||||||
| CslcConnIdle | 1.3.6.1.4.1.244.1.1.5.2.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The amount of time that the connection has been idle, in seconds.
| |||||||||||||||||||||
| CslcConnIdleStr | 1.3.6.1.4.1.244.1.1.5.2.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The amount of time that the connection has been idle, formatted in hours:minutes:seconds. | |||||||||||||||||||||
| CslcConnSourceIP | 1.3.6.1.4.1.244.1.1.5.2.1.10 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current For network (Telnet and SSH) connections into the SLC, the source IP Address. | |||||||||||||||||||||
| NslcSystem | 1.3.6.1.4.1.244.1.1.6 | ||||||||||||||||||||
| SslcSystemModel | 1.3.6.1.4.1.244.1.1.6.1 | OCTET STRING | RO | SLC9032 | |||||||||||||||||
scalar · OCTET STRING · read-only · current The model of the SLC: SLC8, SLC16, SLC32, SLC48, SLC8008, SLC8016, SLC8024, SLC8032, SLC8040, SLC8048. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemSerialNo | 1.3.6.1.4.1.244.1.1.6.2 | OCTET STRING | RO | 000F2CA00001 | |||||||||||||||||
scalar · OCTET STRING · read-only · current The serial number of the SLC. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemFWRev | 1.3.6.1.4.1.244.1.1.6.3 | OCTET STRING | RO | 9.7.0.0R21 | |||||||||||||||||
scalar · OCTET STRING · read-only · current The firmware version of the SLC. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLoadVia | 1.3.6.1.4.1.244.1.1.6.4 | INTEGER | RO | ftp(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The method used for firmware updates.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemFTPServer | 1.3.6.1.4.1.244.1.1.6.5 | IpAddress | RO | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the FTP/TFTP server used for firmware updates, and for saving and restoring configurations. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemFTPPath | 1.3.6.1.4.1.244.1.1.6.6 | OCTET STRING | RO | | |||||||||||||||||
scalar · OCTET STRING · read-only · current The path on the FTP server used for firmware updates, and for saving and restoring configurations. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemKeypadLock | 1.3.6.1.4.1.244.1.1.6.7 | EnabledState | RO | 1 | |||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the LCD keypad is locked for editing configuration. The keys can only be used to view settings. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemTimeZone | 1.3.6.1.4.1.244.1.1.6.8 | OCTET STRING | RO | UTC | |||||||||||||||||
scalar · OCTET STRING · read-only · current The time zone of the SLC. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWelcomeBanner | 1.3.6.1.4.1.244.1.1.6.9 | OCTET STRING | RO | Welcome to the SLC | |||||||||||||||||
scalar · OCTET STRING · read-only · current The banner displayed before the login prompt. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLoginBanner | 1.3.6.1.4.1.244.1.1.6.10 | OCTET STRING | RO | | |||||||||||||||||
scalar · OCTET STRING · read-only · current The banner displayed after successful login. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLogoutBanner | 1.3.6.1.4.1.244.1.1.6.11 | OCTET STRING | RO | | |||||||||||||||||
scalar · OCTET STRING · read-only · current The banner displayed after logout. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWebTimeout | 1.3.6.1.4.1.244.1.1.6.12 | Integer32 (0 | 5..120) | RO | 30 | |||||||||||||||||
scalar · Integer32 (0 | 5..120) · read-only · current The timeout (in minutes) for web sessions. A value of 0 indicates that timeouts are disabled.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWebGadget | 1.3.6.1.4.1.244.1.1.6.13 | EnabledState | RO | 1 | |||||||||||||||||
scalar · EnabledState · read-only · current If enabled, iGoogle Gadget web content is enabled. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemAction | 1.3.6.1.4.1.244.1.1.6.14 | INTEGER | RW | noAction(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Performs an action on the SLC. A read of this object always returns the value noAction(1). Setting this object to rebootSLC(2) will terminate all connections and reboot the SLC. Setting this object to shutdownSLC(3) will terminate all connections and shutdown the SLC so it can be powered off.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemSSHPreAuthBanner | 1.3.6.1.4.1.244.1.1.6.15 | OCTET STRING | RO | | |||||||||||||||||
scalar · OCTET STRING · read-only · current The banner displayed prior to SSH authentication. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemSiteRackRow | 1.3.6.1.4.1.244.1.1.6.16 | Integer32 (1..999) | RO | 1 | |||||||||||||||||
scalar · Integer32 (1..999) · read-only · current The identifier of the row of racks in a data center containing the SLC. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemSiteRackCluster | 1.3.6.1.4.1.244.1.1.6.17 | Integer32 (1..999) | RO | 1 | |||||||||||||||||
scalar · Integer32 (1..999) · read-only · current The identifier of the group of racks in a given row (slcSystemSiteRackRow) containing the SLC. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemSiteRack | 1.3.6.1.4.1.244.1.1.6.18 | Integer32 (1..999) | RO | 1 | |||||||||||||||||
scalar · Integer32 (1..999) · read-only · current The identifier of the rack in a given rack group (slcSystemSiteRackCluster) containing the SLC. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLCDScreens | 1.3.6.1.4.1.244.1.1.6.19 | OCTET STRING | RO | Current Time,Network,Console,Date/Time,Release,… | |||||||||||||||||
scalar · OCTET STRING · read-only · current A string describing the enabled LCD screens, in the order they are displayed. Each screen is separated by a comma. The possible screens are Current Time, Network, Console, Release, Date/Time, Device Ports, Location, Temperature and User Strings. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLCDUserStrLine1 | 1.3.6.1.4.1.244.1.1.6.20 | OCTET STRING | RO | | |||||||||||||||||
scalar · OCTET STRING · read-only · current For the LCD screen User Strings, this is the first line displayed on the LCD. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLCDUserStrLine2 | 1.3.6.1.4.1.244.1.1.6.21 | OCTET STRING | RO | | |||||||||||||||||
scalar · OCTET STRING · read-only · current For the LCD screen User Strings, this is the second line displayed on the LCD. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLCDScrolling | 1.3.6.1.4.1.244.1.1.6.22 | EnabledState | RO | 1 | |||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the LCD automatically scrolls through the enabled screens. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLCDScrollDelay | 1.3.6.1.4.1.244.1.1.6.23 | Integer32 (1..60) | RO | 5 | |||||||||||||||||
scalar · Integer32 (1..60) · read-only · current If LCD scrolling is enabled (slcSystemLCDScrolling), the delay in seconds between displaying screens.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemLCDIdleDelay | 1.3.6.1.4.1.244.1.1.6.24 | Integer32 (5..60) | RO | 10 | |||||||||||||||||
scalar · Integer32 (5..60) · read-only · current If LCD scrolling is enabled (slcSystemLCDScrolling), the number of seconds after keypad input before auto-scrolling restarts.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemInternalTemp | 1.3.6.1.4.1.244.1.1.6.25 | Integer32 | RO | 58 | |||||||||||||||||
scalar · Integer32 · read-only · current The internal temperature of the SLC, given in Celsius. A value of 9999 is returned if an error is encountered reading the temperature.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWebProtocol | 1.3.6.1.4.1.244.1.1.6.26 | INTEGER | RO | tlsv1SSLv3(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The protocol used by the web server. This setting is no longer available; the web server is configured to only support the TLS protocol.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWebCipher | 1.3.6.1.4.1.244.1.1.6.27 | INTEGER | RO | 0 | |||||||||||||||||
scalar · INTEGER · read-only · current The strength of the cipher used by the web server. A cipher with high strength uses 256, 168 or 128 bits; a cipher with medium strength uses 128 bits; a cipher with low strength uses 64 or 56 bits.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemModelString | 1.3.6.1.4.1.244.1.1.6.28 | OCTET STRING | RO | SLC9032-2AC-USB | |||||||||||||||||
scalar · OCTET STRING · read-only · current A string that describes the SLC model: <Model>-<Power Supply>-<PCCard or USB> Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWebGroup | 1.3.6.1.4.1.244.1.1.6.29 | OCTET STRING | RO | | |||||||||||||||||
scalar · OCTET STRING · read-only · current The group or groups that may access the web. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWebInterface | 1.3.6.1.4.1.244.1.1.6.30 | OCTET STRING | RO | Eth1,Eth2,Eth3,Eth4,VEth1,VEth2,PPP | |||||||||||||||||
scalar · OCTET STRING · read-only · current A string describing the interfaces the web is available on; for example: Eth1,Eth2,PPP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWebBanner | 1.3.6.1.4.1.244.1.1.6.31 | OCTET STRING | RO | | |||||||||||||||||
scalar · OCTET STRING · read-only · current The banner on the web home page. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemInternalTempLow | 1.3.6.1.4.1.244.1.1.6.32 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The minimum acceptable internal temperature for the SLC, in Celsius.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemInternalTempHigh | 1.3.6.1.4.1.244.1.1.6.33 | Integer32 | RO | 75 | |||||||||||||||||
scalar · Integer32 · read-only · current The maximum acceptable internal temperature for the SLC, in Celsius.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemCalibrateTemp | 1.3.6.1.4.1.244.1.1.6.34 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current An offset in Celsius for calibrating the internal temperature of the SLC.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslcSystemWebServer | 1.3.6.1.4.1.244.1.1.6.35 | EnabledState | RO | 2 | |||||||||||||||||
scalar · EnabledState · read-only · current If enabled, the web server will run and listen on TCP ports 80 and 443 (all requests to port 80 are redirected to port 443). Example values from LibreNMS test devices
| |||||||||||||||||||||
| NslcEventObjects | 1.3.6.1.4.1.244.1.1.7 | ||||||||||||||||||||
| SslcPowerSupplyId | 1.3.6.1.4.1.244.1.1.7.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The identifier of the power supply in a slcEventPowerSupply trap.
| |||||||||||||||||||||
| SslcPowerSupplyAction | 1.3.6.1.4.1.244.1.1.7.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The action that occurred for a power supply in a slcEventPowerSupply trap.
| |||||||||||||||||||||
| SslcDevPortNumBytes | 1.3.6.1.4.1.244.1.1.7.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of bytes received on a Device Port to trigger a slcEventDevicePortData or slcEventDevicePortSLMData trap.
| |||||||||||||||||||||
| SslcDevPortData | 1.3.6.1.4.1.244.1.1.7.4 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The character data received on a Device Port to trigger a slcEventDevicePortData trap. | |||||||||||||||||||||
| SslcDevPortStartByte | 1.3.6.1.4.1.244.1.1.7.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The starting byte within the logging buffer of data received on a Device Port, which triggered a slcEventDevicePortSLMData trap. | |||||||||||||||||||||
| SslcDevPortTimeFrame | 1.3.6.1.4.1.244.1.1.7.6 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The time frame, in seconds, after which a slcEventDevicePortSLMData trap is sent to the SLM to trigger retrieval of Device Port data.
| |||||||||||||||||||||
| SslcDevPortDeviceErrorStatus | 1.3.6.1.4.1.244.1.1.7.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The status returned when an error occurs in a device connected to a Device Port.
| |||||||||||||||||||||
| SslcHostname | 1.3.6.1.4.1.244.1.1.7.8 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The hostname of the SLC sending the trap. | |||||||||||||||||||||
| SslcPCCardSlot | 1.3.6.1.4.1.244.1.1.7.9 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The PC Card slot indicated for the trap.
| |||||||||||||||||||||
| SslcPCCardAction | 1.3.6.1.4.1.244.1.1.7.10 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The action that occurred on a PC Card slot.
| |||||||||||||||||||||
| SslcPCCardType | 1.3.6.1.4.1.244.1.1.7.11 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of card inserted in a PC Card slot.
| |||||||||||||||||||||
| SslcUSBAction | 1.3.6.1.4.1.244.1.1.7.12 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The action that occurred on a USB Port.
| |||||||||||||||||||||
| SslcUSBType | 1.3.6.1.4.1.244.1.1.7.13 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of device inserted in a USB Port.
| |||||||||||||||||||||
| SslcDevPortErrorStatus | 1.3.6.1.4.1.244.1.1.7.14 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The status returned when an error occurs in a Device Port. dataDrop applies to a specific Device Port and is sent when a Device Port is required to discard data in order to keep data moving for all connections to the Device Port. invalidIOConfiguration and errorIOModules apply to all Device Ports. invalidIOConfiguration is sent when the I/O modules installed in a SLC are in an invalid configuration. errorIOModules is sent when an error is detected in one or more I/O modules.
| |||||||||||||||||||||
| SslcSDCardAction | 1.3.6.1.4.1.244.1.1.7.15 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The action that occurred on the SD Card slot.
| |||||||||||||||||||||
| SslcRPMAction | 1.3.6.1.4.1.244.1.1.7.16 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The action that occurred on a Remote Power Manager. | |||||||||||||||||||||
| SslcEventHost | 1.3.6.1.4.1.244.1.1.7.17 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The name or IP address of a host in a SLC event. | |||||||||||||||||||||
Textual conventions
AuthOrderInteger32 (0..6)Authentication order for a remote authentication method. If the authentication method is disabled, AuthOrder = 0.
EnabledStateINTEGERdisabled(1)enabled(2)The enabled/disabled state of an SLC feature.
RPMOutletIndexInteger32 (1..60)The unique identifier for an RPM outlet.
RPMTowerIndexInteger32 (1..2)The unique identifier for an RPM tower or unit.
SyslogLevelINTEGERdebug(5)error(4)info(2)off(1)warning(3)Syslog logging levels
TimeoutDataDirectionINTEGERbothDirections(3)incomingNetwork(1)outgoingNetwork(2)The direction of data used to determine if a connection has timed out.
UserGroupINTEGERadministrators(3)custom(4)default(1)power(2)The group assigned to a user. Each group has a set of user rights associated with it.
UserRightsOCTET STRING (SIZE (0..255))The rights assigned to a user. Each group has a set of user rights associated with it. The string is a comma-separated list of rights: ad - full administrative rights do - Device Ports operations dp - configure Device Ports dr - Diagnostics and Reports dt - configure Date and Time fc - manage Firmware and Configurations lu - configure Local Users md - configure Internal Modem nt - configure Networking pc - configure PC Card ra - configure Remote Authentication rp - manage Remote Power Managers rs - Reboot or Shutdown the SLC sd - manage SD Card sk - configure SSH Keys sn - configure Secure Ltx Network sv - configure Services ub - configure USB Devices um - configure User Menus wb - Web Access
Traps / Notifications
- slcEventDevicePortData
1.3.6.1.4.1.244.1.1.0.4 - slcEventDevicePortDeviceError
1.3.6.1.4.1.244.1.1.0.11 - slcEventDevicePortDeviceHighHumidity
1.3.6.1.4.1.244.1.1.0.10 - slcEventDevicePortDeviceHighTemp
1.3.6.1.4.1.244.1.1.0.8 - slcEventDevicePortDeviceLowHumidity
1.3.6.1.4.1.244.1.1.0.9 - slcEventDevicePortDeviceLowTemp
1.3.6.1.4.1.244.1.1.0.7 - slcEventDevicePortError
1.3.6.1.4.1.244.1.1.0.15 - slcEventDevicePortSLMConfig
1.3.6.1.4.1.244.1.1.0.6 - slcEventDevicePortSLMData
1.3.6.1.4.1.244.1.1.0.5 - slcEventNoDialToneAlarm
1.3.6.1.4.1.244.1.1.0.17 - slcEventPCCardAction
1.3.6.1.4.1.244.1.1.0.12 - slcEventPingHostFails
1.3.6.1.4.1.244.1.1.0.19 - slcEventPowerSupply
1.3.6.1.4.1.244.1.1.0.1 - slcEventRPMAction
1.3.6.1.4.1.244.1.1.0.18 - slcEventSDCardAction
1.3.6.1.4.1.244.1.1.0.16 - slcEventSLCInternalTemp
1.3.6.1.4.1.244.1.1.0.13 - slcEventSLCShutdown
1.3.6.1.4.1.244.1.1.0.3 - slcEventSysadminPassword
1.3.6.1.4.1.244.1.1.0.2 - slcEventUSBAction
1.3.6.1.4.1.244.1.1.0.14