LCOS-SX-MIB
LANCOM SystemsManagement information base definitions
snmptranslate -m LCOS-SX-MIB -Tpsnmpwalk -v2c -c <community> -m LCOS-SX-MIB <host> 1.3.6.1.4.1.2356.14Imports
| IF-MIB | ifIndex |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| Q-BRIDGE-MIB | dot1qFdbId, dot1qTpFdbAddress, dot1qTpFdbPort |
| RMON-MIB | OwnerString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IlcosSX | 1.3.6.1.4.1.2356.14 | |||
identity Management information base definitions | ||||
| NlcsSystem | 1.3.6.1.4.1.2356.14.1 | |||
| NlcsSystemInformation | 1.3.6.1.4.1.2356.14.1.1 | |||
| NlcsSystemInfo | 1.3.6.1.4.1.2356.14.1.1.1 | |||
| SlcsSystemInfoModelName | 1.3.6.1.4.1.2356.14.1.1.1.2 | DisplayString | RO | |
| SlcsSystemInfoSystemDescript | 1.3.6.1.4.1.2356.14.1.1.1.3 | DisplayString | RO | |
| SlcsSystemInfoLocation | 1.3.6.1.4.1.2356.14.1.1.1.4 | DisplayString | RW | |
| SlcsSystemInfoContact | 1.3.6.1.4.1.2356.14.1.1.1.5 | DisplayString | RW | |
| SlcsSystemInfoSystemName | 1.3.6.1.4.1.2356.14.1.1.1.6 | DisplayString | RW | |
| SlcsSystemInfoSystemDate | 1.3.6.1.4.1.2356.14.1.1.1.7 | DisplayString | RO | |
| SlcsSystemInfoSystemUptime | 1.3.6.1.4.1.2356.14.1.1.1.8 | DisplayString | RO | |
| SlcsSystemInfoBootloaderVersion | 1.3.6.1.4.1.2356.14.1.1.1.9 | DisplayString | RO | |
| SlcsSystemInfoFirmwareVersion | 1.3.6.1.4.1.2356.14.1.1.1.10 | DisplayString | RO | |
| SlcsSystemInfoHardwareVersion | 1.3.6.1.4.1.2356.14.1.1.1.11 | DisplayString | RO | |
| SlcsSystemInfoMechanicalVersion | 1.3.6.1.4.1.2356.14.1.1.1.12 | DisplayString | RO | |
| SlcsSystemInfoSeriesNumber | 1.3.6.1.4.1.2356.14.1.1.1.13 | DisplayString | RO | |
| SlcsSystemInfoHostMACAddress | 1.3.6.1.4.1.2356.14.1.1.1.14 | DisplayString | RO | |
| SlcsSystemInfoMemory | 1.3.6.1.4.1.2356.14.1.1.1.15 | DisplayString | RO | |
scalar · DisplayString · read-only · current Total Memory in RAM(MB) | ||||
| SlcsSystemInfoFlash | 1.3.6.1.4.1.2356.14.1.1.1.16 | DisplayString | RO | |
| SlcsSystemInfoFanSpeed | 1.3.6.1.4.1.2356.14.1.1.1.17 | DisplayString | RO | |
scalar · DisplayString · read-only · current Fan Speed | ||||
| SlcsSystemInfoTemperature1 | 1.3.6.1.4.1.2356.14.1.1.1.22 | DisplayString | RO | |
| SlcsSystemInfoTemperature2 | 1.3.6.1.4.1.2356.14.1.1.1.23 | DisplayString | RO | |
| SlcsSystemInfoCPULoad | 1.3.6.1.4.1.2356.14.1.1.1.24 | DisplayString | RO | |
scalar · DisplayString · read-only · current CPU Utilization. | ||||
| SlcsSystemInfoProductionDate | 1.3.6.1.4.1.2356.14.1.1.1.33 | DisplayString | RO | |
scalar · DisplayString · read-only · current Production Date. | ||||
| SlcsSystemInfoTemperature3 | 1.3.6.1.4.1.2356.14.1.1.1.34 | DisplayString | RO | |
| SlcsSystemInfoPhysicalPorts | 1.3.6.1.4.1.2356.14.1.1.1.200 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of physical Ports | ||||
| SlcsSystemInfoTemperatureSensor1 | 1.3.6.1.4.1.2356.14.1.1.1.201 | Integer32 | RO | |
scalar · Integer32 · read-only · current Temperature sensor 1 in degrees Celsius | ||||
| SlcsSystemInfoTemperatureSensor2 | 1.3.6.1.4.1.2356.14.1.1.1.202 | Integer32 | RO | |
scalar · Integer32 · read-only · current Temperature sensor 2 in degrees Celsius | ||||
| SlcsSystemInfoTemperatureSensor3 | 1.3.6.1.4.1.2356.14.1.1.1.203 | Integer32 | RO | |
scalar · Integer32 · read-only · current Temperature sensor 3 in degrees Celsius | ||||
| SlcsSystemInfoFreeMemory | 1.3.6.1.4.1.2356.14.1.1.1.204 | Integer32 | RO | |
scalar · Integer32 · read-only · current Free memory in RAM(MB) | ||||
| NlcsPowerInformation | 1.3.6.1.4.1.2356.14.1.1.2 | |||
| SlcsPowerInfoDetectedPSUA | 1.3.6.1.4.1.2356.14.1.1.2.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current Is the power supply unit present. | ||||
| SlcsPowerInfoDetectedPSUB | 1.3.6.1.4.1.2356.14.1.1.2.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Is the power supply unit present. | ||||
| SlcsPowerInfoPSUStatusA | 1.3.6.1.4.1.2356.14.1.1.2.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The status of power supply unit. | ||||
| SlcsPowerInfoPSUStatusB | 1.3.6.1.4.1.2356.14.1.1.2.5 | DisplayString | RO | |
scalar · DisplayString · read-only · current The status of power supply unit. | ||||
| SlcsPowerInfoFANSpeedA | 1.3.6.1.4.1.2356.14.1.1.2.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The fan speed of power supply unit. | ||||
| SlcsPowerInfoFANSpeedB | 1.3.6.1.4.1.2356.14.1.1.2.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The fan speed of power supply unit. | ||||
| SlcsPowerInfoTemperatureA | 1.3.6.1.4.1.2356.14.1.1.2.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The temperature of power supply unit. | ||||
| SlcsPowerInfoTemperatureB | 1.3.6.1.4.1.2356.14.1.1.2.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The temperature of power supply unit. | ||||
| SlcsPowerInfoOperatingMode | 1.3.6.1.4.1.2356.14.1.1.2.10 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current The operating mode of power supply unit. 0:Boost 1:Redundant | ||||
| NlcsSystemTimeConf | 1.3.6.1.4.1.2356.14.1.2 | |||
| NlcsSystemTime | 1.3.6.1.4.1.2356.14.1.2.2 | |||
| NlcsSystemTimeZone | 1.3.6.1.4.1.2356.14.1.2.2.1 | |||
| SlcsSystemTimeZoneConf | 1.3.6.1.4.1.2356.14.1.2.2.1.1 | Integer32 (-7200..7201) | RW | |
scalar · Integer32 (-7200..7201) · read-write · current Get/Set the NTP Time Zone. The value range is between -7200 and 7201 (minutes). 0 : None. -7200 : (GMT-12:00). -6600 : (GMT-11:00). -6000 : (GMT-10:00). -5400 : (GMT-09:00). -4800 : (GMT-08:00)Pacific Time. -4801 : (GMT-08:00)Tijuana, Baja California. -4200 : (GMT-07:00)Arizona. -4201 : (GMT-07:00)Chihuahua, La Paz, Mazatlan - New. -4202 : (GMT-07:00)Chihuahua, La Paz, Mazatlan - Old. -4203 : (GMT-07:00)Mountain Time. -3600 : (GMT-06:00)Central America. -3601 : (GMT-06:00)Central Time. -3602 : (GMT-06:00)Guadalajara, Mexico City, Monterrey - New. -3603 : (GMT-06:00)Guadalajara, Mexico City, Monterrey - Old. -3604 : (GMT-06:00)Saskatchewan. -3000 : (GMT-05:00)Bogota, Lima, Quito, Rio Branco. -3001 : (GMT-05:00)Eastern Time. -3002 : (GMT-05:00)Indiana. -2700 : (GMT-04:30). -2400 : (GMT-04:00)Atlantic Time. -2401 : (GMT-04:00)La Paz. -2402 : (GMT-04:00)Manaus. -2403 : (GMT-04:00)Santiago. -2100 : (GMT-03:30). -1800 : (GMT-03:00)Brasilia. -1801 : (GMT-03:00)Buenos Aires. -1802 : (GMT-03:00)Georgetown. -1803 : (GMT-03:00)Greenland. -1804 : (GMT-03:00)Montevideo. -1805 : (GMT-02:00). -600 : (GMT-01:00)Azores. -601 : (GMT-01:00)Cape Verde Is. 1 : (GMT) Casablanca. 2 : (GMT) Greenwich Mean Time. 3 : (GMT) Monrovia, Reykjavik. 600 : (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna. 601 : (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague. 602 : (GMT+01:00) Brussels, Copenhagen, Madrid, Paris. 603 : (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb. 604 : (GMT+01:00) West Central Africa. 1200 : (GMT+02:00) Amman. 1201 : (GMT+02:00) Athens, Bucharest, Istanbul. 1202 : (GMT+02:00) Beirut. 1203 : (GMT+02:00) Cairo. 1204 : (GMT+02:00) Harare, Pretoria. 1205 : (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius. 1206 : (GMT+02:00) Jerusalem. 1207 : (GMT+02:00) Minsk. 1208 : (GMT+02:00) Windhoek. 1800 : (GMT+03:00) Baghdad. 1801 : (GMT+03:00) Kuwait, Riyadh. 1802 : (GMT+03:00) Moscow, St. Petersburg, Volgograd. 1803 : (GMT+03:00) Nairobi. 1804 : (GMT+03:00) Tbilisi. 2100 : (GMT+03:30) Tehran. 2400 : (GMT+04:00) Abu Dhabi, Muscat. 2401 : (GMT+04:00) Baku. 2402 : (GMT+04:00) Caucasus Standard Time. 2403 : (GMT+04:00) Port Louis. 2404 : (GMT+04:00) Yerevan. 2700 : (GMT+04:30) Kabul. 3000 : (GMT+05:00) Ekaterinburg. 3001 : (GMT+05:00) Islamabad, Karachi. 3002 : (GMT+05:00) Tashkent. 3300 : (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi. 3301 : (GMT+05:30) Sri Jayawardenepura. 3455 : (GMT+05:45) Kathmandu. 3600 : (GMT+06:00) Almaty, Novosibirsk. 3601 : (GMT+06:00) Astana, Dhaka. 3600 : (GMT+06:30) Yangon (Rangoon). 4200 : (GMT+07:00) Bangkok, Hanoi, Jakarta. 4201 : (GMT+07:00) Krasnoyarsk. 4800 : (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi. 4801 : (GMT+08:00) Irkutsk, Ulaan Bataar. 4802 : (GMT+08:00) Kuala Lumpur, Singapore. 4803 : (GMT+08:00) Perth. 4804 : (GMT+08:00) Taipei. 5400 : (GMT+09:00) Osaka, Sapporo, Tokyo. 5401 : (GMT+09:00) Seoul. 5402 : (GMT+09:00) Yakutsk. 5700 : (GMT+09:30) Adelaide. 5701 : (GMT+09:30) Darwin. 6000 : (GMT+10:00) Brisbane. 6001 : (GMT+10:00) Canberra, Melbourne, Sydney. 6002 : (GMT+10:00) Guam, Port Moresby. 6003 : (GMT+10:00) Hobart. 6004 : (GMT+10:00) Vladivostok. 6600 : (GMT+11:00) Magadan, Solomon Is., New Caledonia. 7200 : (GMT+12:00) Auckland, Wellington. 7201 : (GMT+12:00) Fiji, Kamchatka, Marshall Is. | ||||
| SlcsSystemTimeZoneAcronym | 1.3.6.1.4.1.2356.14.1.2.2.1.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current Acronym - User can set the acronym of the time zone. This is a User configurable acronym to identify the time zone. Range : 0 - 16 characters. | ||||
| NlcsSystemTimeDaylightSaving | 1.3.6.1.4.1.2356.14.1.2.2.2 | |||
| SlcsSystemTimeDaylightSavingMode | 1.3.6.1.4.1.2356.14.1.2.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The system Daylight Savings Mode.
disable(0) : Disable.
recurring(1) : Recurring
- configure the Daylight Saving Time duration
to repeat the configuration every year.
nonRecurring(2): Non-Recurring - configure the Daylight Saving Time
duration for single time configuration.
| ||||
| SlcsSystemTimeDaylightSavingStartWeek | 1.3.6.1.4.1.2356.14.1.2.2.2.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current Start time Week. Use in Recurring Mode. Range : first,2,3,4,last. Default : first. | ||||
| SlcsSystemTimeDaylightSavingStartDay | 1.3.6.1.4.1.2356.14.1.2.2.2.3 | DayOfWeek | RW | |
scalar · DayOfWeek · read-write · current Start time Day. Use in Recurring Mode. | ||||
| SlcsSystemTimeDaylightSavingStartMonth | 1.3.6.1.4.1.2356.14.1.2.2.2.4 | Month | RW | |
scalar · Month · read-write · current Start time Month. | ||||
| SlcsSystemTimeDaylightSavingStartDate | 1.3.6.1.4.1.2356.14.1.2.2.2.5 | Integer32 (1..31) | RW | |
scalar · Integer32 (1..31) · read-write · current Start time Date. Use in Non-Recurring Mode. Range : 1 - 31. Default : 1. | ||||
| SlcsSystemTimeDaylightSavingStartYear | 1.3.6.1.4.1.2356.14.1.2.2.2.6 | Integer32 (2000..2097) | RW | |
scalar · Integer32 (2000..2097) · read-write · current Start time Year. Use in Non-Recurring Mode. Range : 2000 - 2097. Default : 2000. | ||||
| SlcsSystemTimeDaylightSavingStartHours | 1.3.6.1.4.1.2356.14.1.2.2.2.7 | Integer32 (0..23) | RW | |
scalar · Integer32 (0..23) · read-write · current Start time Hours. Range : 0 - 23. Default : 0. | ||||
| SlcsSystemTimeDaylightSavingStartMinutes | 1.3.6.1.4.1.2356.14.1.2.2.2.8 | Integer32 (0..59) | RW | |
scalar · Integer32 (0..59) · read-write · current Start time Minutes. Range : 0 - 59. Default : 0. | ||||
| SlcsSystemTimeDaylightSavingEndWeek | 1.3.6.1.4.1.2356.14.1.2.2.2.9 | DisplayString | RW | |
scalar · DisplayString · read-write · current End time Week. Use in Recurring Mode. Range : first,2,3,4,last. Default : first. | ||||
| SlcsSystemTimeDaylightSavingEndDay | 1.3.6.1.4.1.2356.14.1.2.2.2.10 | DayOfWeek | RW | |
scalar · DayOfWeek · read-write · current End time Day. Use in Recurring Mode. | ||||
| SlcsSystemTimeDaylightSavingEndMonth | 1.3.6.1.4.1.2356.14.1.2.2.2.11 | Month | RW | |
scalar · Month · read-write · current End time Month. | ||||
| SlcsSystemTimeDaylightSavingEndDate | 1.3.6.1.4.1.2356.14.1.2.2.2.12 | Integer32 (1..31) | RW | |
scalar · Integer32 (1..31) · read-write · current End time Date. Use in Non-Recurring Mode. Range : 1 - 31. Default : 1. | ||||
| SlcsSystemTimeDaylightSavingEndYear | 1.3.6.1.4.1.2356.14.1.2.2.2.13 | Integer32 (2000..2097) | RW | |
scalar · Integer32 (2000..2097) · read-write · current End time Year. Use in Non-Recurring Mode. Range : 2000 - 2097. Default : 2000. | ||||
| SlcsSystemTimeDaylightSavingEndHours | 1.3.6.1.4.1.2356.14.1.2.2.2.14 | Integer32 (0..23) | RW | |
scalar · Integer32 (0..23) · read-write · current End time Hours. Range : 0 - 23. Default : 0. | ||||
| SlcsSystemTimeDaylightSavingEndMinutes | 1.3.6.1.4.1.2356.14.1.2.2.2.15 | Integer32 (0..59) | RW | |
scalar · Integer32 (0..59) · read-write · current End time Minutes. Range : 0 - 59. Default : 0. | ||||
| SlcsSystemTimeDaylightSavingOffset | 1.3.6.1.4.1.2356.14.1.2.2.2.16 | Integer32 (1..1440) | RW | |
scalar · Integer32 (1..1440) · read-write · current Offset - the number of minutes to add during Daylight Saving Time. Range : 1 - 1440(Minutes). Default : 1. | ||||
| NlcsSystemTimeConfiguration | 1.3.6.1.4.1.2356.14.1.2.2.3 | |||
| SlcsSystemTimeConfigurationClockSource | 1.3.6.1.4.1.2356.14.1.2.2.3.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:Use Local Settings. 1:Use NTP Server. | ||||
| SlcsSystemTimeConfigurationSystemDate | 1.3.6.1.4.1.2356.14.1.2.2.3.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current System date. Default format:yyyy-mm-dd. When ClockSource is Use Local Settings, you can set this field. | ||||
| SlcsSystemTimeConfigurationDateFormat | 1.3.6.1.4.1.2356.14.1.2.2.3.3 | Integer32 (0 | 1 | 2) | RW | |
scalar · Integer32 (0 | 1 | 2) · read-write · current The date format of the system. 0:yyyy-mm-dd 1:mm-dd-yyyy 2:dd-mm-yyyy | ||||
| SlcsSystemTimeConfigurationTimeFormat | 1.3.6.1.4.1.2356.14.1.2.2.3.4 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current The time format of the system. 0:24-hr, format:hh:mm:ss 1:12-hr, format:hh:mm:ss am/pm | ||||
| SlcsSystemTimeConfigurationSystemTime | 1.3.6.1.4.1.2356.14.1.2.2.3.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current System date. 24-hr, format:hh:mm:ss 12-hr, format:hh:mm:ss am/pm When ClockSource is Use Local Settings, you can set this field. | ||||
| NlcsSystemAccount | 1.3.6.1.4.1.2356.14.1.3 | |||
| NlcsSystemAccountUsers | 1.3.6.1.4.1.2356.14.1.3.1 | |||
| TlcsUserConfigTable | 1.3.6.1.4.1.2356.14.1.3.1.1 | NA | ||
table · not-accessible · current The User Config Table. | ||||
| RlcsUserConfigEntry | 1.3.6.1.4.1.2356.14.1.3.1.1.1 | NA | ||
| ClcsUserConfigIndex | 1.3.6.1.4.1.2356.14.1.3.1.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The user Config Index. | ||||
| ClcsUserConfigUserName | 1.3.6.1.4.1.2356.14.1.3.1.1.1.2 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current A string identifying the user name for the entry. string length: 1-31. | ||||
| ClcsUserConfigPassword | 1.3.6.1.4.1.2356.14.1.3.1.1.1.3 | DisplayString (SIZE (0..128)) | RC | |
column · DisplayString (SIZE (0..128)) · read-create · current The password of the user. string length: 0-128. | ||||
| ClcsUserConfigPrivilegeLevel | 1.3.6.1.4.1.2356.14.1.3.1.1.1.4 | Integer32 (1..15) | RC | |
column · Integer32 (1..15) · read-create · current The privilege level of the user.If the privilege level value is 15, it can access all groups.range: 1-15. | ||||
| ClcsUserConfigRowStatus | 1.3.6.1.4.1.2356.14.1.3.1.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsPrivilegeLevelConfigTable | 1.3.6.1.4.1.2356.14.1.3.1.2 | NA | ||
table · not-accessible · current The Privilege Level Config Table. | ||||
| RlcsPrivilegeLevelConfigEntry | 1.3.6.1.4.1.2356.14.1.3.1.2.1 | NA | ||
| ClcsPrivilegeLevelIndex | 1.3.6.1.4.1.2356.14.1.3.1.2.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The Privilege Level Index. | ||||
| ClcsPrivilegeLevelGroupName | 1.3.6.1.4.1.2356.14.1.3.1.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The name identifying the privilege group. | ||||
| ClcsPrivilegeLevelConfigReadOnly | 1.3.6.1.4.1.2356.14.1.3.1.2.1.3 | Integer32 (1..15) | RW | |
column · Integer32 (1..15) · read-write · current The privilege level of configuration read-only.If the privilege level value is 15,it can access all groups. range: 1-15. | ||||
| ClcsPrivilegeLevelConfigReadWrite | 1.3.6.1.4.1.2356.14.1.3.1.2.1.4 | Integer32 (1..15) | RW | |
column · Integer32 (1..15) · read-write · current The privilege level of configuration/execute read/write. If the privilege level value is 15,it can access all groups. range: 1-15. | ||||
| ClcsPrivilegeLevelStatusReadOnly | 1.3.6.1.4.1.2356.14.1.3.1.2.1.5 | Integer32 (1..15) | RW | |
column · Integer32 (1..15) · read-write · current The privilege level of status/statistics read-only. If the privilege level value is 15,it can access all groups. range: 1-15. | ||||
| ClcsPrivilegeLevelStatusReadWrite | 1.3.6.1.4.1.2356.14.1.3.1.2.1.6 | Integer32 (1..15) | RW | |
column · Integer32 (1..15) · read-write · current The privilege level of status/statistics read-write. If the privilege level value is 15,it can access all groups. range: 1-15. | ||||
| SlcsSystemAccountSuperUserPassword | 1.3.6.1.4.1.2356.14.1.3.1.1500 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Encrypted admin password | ||||
| SlcsSystemAccountSuperUserPasswordUnhashed | 1.3.6.1.4.1.2356.14.1.3.1.1501 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Admin password This object will return an empty string even if a password is set. | ||||
| SlcsSystemAccountEnforcePasswordRules | 1.3.6.1.4.1.2356.14.1.3.1.1502 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Enforce the password policies or not. | ||||
| NlcsIP | 1.3.6.1.4.1.2356.14.1.4 | |||
| NlcsIPConfigurationBasic | 1.3.6.1.4.1.2356.14.1.4.1 | |||
| SlcsIPConfigIPv4DHCPClientEnable | 1.3.6.1.4.1.2356.14.1.4.1.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current IPv4 DHCP Client Enabled 0: Disable 1: Enable | ||||
| SlcsIPConfigIPv4Address | 1.3.6.1.4.1.2356.14.1.4.1.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current IPv4 Address. | ||||
| SlcsIPConfigSubnetMask | 1.3.6.1.4.1.2356.14.1.4.1.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current IPv4 SubnetMask. | ||||
| SlcsIPConfigGateway | 1.3.6.1.4.1.2356.14.1.4.1.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current IPv4 Gateway. | ||||
| SlcsIPConfigDNSServer | 1.3.6.1.4.1.2356.14.1.4.1.5 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4. DNS configuration is derived from DHCPv6. 5. DNS configuration is derived from DHCPv6 on specific VLAN. | ||||
| SlcsIPConfigDNSServerValue | 1.3.6.1.4.1.2356.14.1.4.1.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current DNS IPv4 Address or VLAN value. | ||||
| NlcsIPConfiguration | 1.3.6.1.4.1.2356.14.1.4.2 | |||
| SlcsMode | 1.3.6.1.4.1.2356.14.1.4.2.2 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current IP Configuration Mode. default:0 0: Host 1: Router | ||||
| SlcsDNSServerSource1 | 1.3.6.1.4.1.2356.14.1.4.2.3 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4. DNS configuration is derived from DHCPv6. 5. DNS configuration is derived from DHCPv6 on specific VLAN. | ||||
| SlcsDNSServerSource2 | 1.3.6.1.4.1.2356.14.1.4.2.4 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4. DNS configuration is derived from DHCPv6. 5. DNS configuration is derived from DHCPv6 on specific VLAN. | ||||
| SlcsDNSServerSource3 | 1.3.6.1.4.1.2356.14.1.4.2.5 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4: DNS configuration is derived from DHCPv6. 5: DNS configuration is derived from DHCPv6 on specific VLAN. | ||||
| SlcsDNSServerSource4 | 1.3.6.1.4.1.2356.14.1.4.2.6 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4: DNS configuration is derived from DHCPv6. 5: DNS configuration is derived from DHCPv6 on specific VLAN. | ||||
| SlcsDNSServerValue1 | 1.3.6.1.4.1.2356.14.1.4.2.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current DNS IPv4/IPv6 Address or VLAN value. | ||||
| SlcsDNSServerValue2 | 1.3.6.1.4.1.2356.14.1.4.2.8 | DisplayString | RW | |
scalar · DisplayString · read-write · current DNS IPv4/IPv6 Address or VLAN value. | ||||
| SlcsDNSServerValue3 | 1.3.6.1.4.1.2356.14.1.4.2.9 | DisplayString | RW | |
scalar · DisplayString · read-write · current DNS IPv4/IPv6 Address or VLAN value. | ||||
| SlcsDNSServerValue4 | 1.3.6.1.4.1.2356.14.1.4.2.10 | DisplayString | RW | |
scalar · DisplayString · read-write · current DNS IPv4/IPv6 Address or VLAN value. | ||||
| SlcsDNSProxy | 1.3.6.1.4.1.2356.14.1.4.2.11 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current DNS Proxy enable/disable. default:0 0: disable 1: enable | ||||
| NlcsIPInterfaces | 1.3.6.1.4.1.2356.14.1.4.3 | |||
| TlcsIPInterfacesTable | 1.3.6.1.4.1.2356.14.1.4.3.1 | NA | ||
table · not-accessible · current A table of IP interface for switch. | ||||
| RlcsIPInterfacesEntry | 1.3.6.1.4.1.2356.14.1.4.3.1.1 | NA | ||
| ClcsIPInterfacesIndex | 1.3.6.1.4.1.2356.14.1.4.3.1.1.1 | Integer32 (1..128) | NA | |
column · Integer32 (1..128) · not-accessible · current interface table index | ||||
| ClcsIPInterfacesVLAN | 1.3.6.1.4.1.2356.14.1.4.3.1.1.2 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current VLAN ID for interface, range: 1-4094. | ||||
| ClcsIPInterfacesIPv4DHCP | 1.3.6.1.4.1.2356.14.1.4.3.1.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current IPv4 DHCP Setting for interface. default:0 0: disable 1: enable | ||||
| ClcsIPInterfacesIPv4DHCPFallback | 1.3.6.1.4.1.2356.14.1.4.3.1.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current IPv4 DHCP fallbcak. range: 1-4294967295 seconds. | ||||
| ClcsIPInterfacesIPv4DHCPCurrentLease | 1.3.6.1.4.1.2356.14.1.4.3.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current IPv4 DHCP Current Lease Address for interface. | ||||
| ClcsIPInterfacesIPv4Address | 1.3.6.1.4.1.2356.14.1.4.3.1.1.6 | IpAddress | RW | |
column · IpAddress · read-write · current IPv4 address for interface. | ||||
| ClcsIPInterfacesIPv4Mask | 1.3.6.1.4.1.2356.14.1.4.3.1.1.7 | Integer32 (0..32) | RW | |
column · Integer32 (0..32) · read-write · current IPv4 mask for interface. | ||||
| ClcsIPInterfacesIPv6DHCP | 1.3.6.1.4.1.2356.14.1.4.3.1.1.8 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current IPv6 DHCP Setting for interface. default:0 0: disable 1: enable | ||||
| ClcsIPInterfacesIPv6RapidCommit | 1.3.6.1.4.1.2356.14.1.4.3.1.1.9 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Enable the DHCPv6 Rapid-Commit option. default:0 0: disable 1: enable | ||||
| ClcsIPInterfacesIPv6CurrentLease | 1.3.6.1.4.1.2356.14.1.4.3.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current IPv6 DHCP Current Lease Address for interface. | ||||
| ClcsIPInterfacesIPv6Address | 1.3.6.1.4.1.2356.14.1.4.3.1.1.11 | DisplayString (SIZE (0..30)) | RW | |
column · DisplayString (SIZE (0..30)) · read-write · current IPv6 address for interface. | ||||
| ClcsIPInterfacesIPv6Mask | 1.3.6.1.4.1.2356.14.1.4.3.1.1.12 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current IPv6 mask for interface. | ||||
| ClcsIPInterfacesRowStatus | 1.3.6.1.4.1.2356.14.1.4.3.1.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsIPRoutes | 1.3.6.1.4.1.2356.14.1.4.4 | |||
| TlcsIPRoutesTable | 1.3.6.1.4.1.2356.14.1.4.4.1 | NA | ||
table · not-accessible · current IP routes table for switch. | ||||
| RlcsIPRoutesEntry | 1.3.6.1.4.1.2356.14.1.4.4.1.1 | NA | ||
| ClcsIPRoutesIndex | 1.3.6.1.4.1.2356.14.1.4.4.1.1.2 | Integer32 (1..32) | NA | |
column · Integer32 (1..32) · not-accessible · current routes table index | ||||
| ClcsIPRoutesNetwork | 1.3.6.1.4.1.2356.14.1.4.4.1.1.3 | DisplayString (SIZE (0..30)) | RW | |
column · DisplayString (SIZE (0..30)) · read-write · current IPv4/IPv6 Network address. Please don't set IPRoutesNetwork to IPv6 and then Set IPRoutesGateway to IPv4, vice versa. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry. If Set IPRoutesNetwork, please also set IPRoutesMaskLength, IPRoutesGateway, IPRoutesNextHopVLAN. | ||||
| ClcsIPRoutesMaskLength | 1.3.6.1.4.1.2356.14.1.4.4.1.1.4 | Integer32 (0..32) | RW | |
column · Integer32 (0..32) · read-write · current IPv4/IPv6 mask length. Please set IPRoutesNetwork first. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry. | ||||
| ClcsIPRoutesGateway | 1.3.6.1.4.1.2356.14.1.4.4.1.1.5 | DisplayString (SIZE (0..30)) | RW | |
column · DisplayString (SIZE (0..30)) · read-write · current IPv4/IPv6 Gateway. Please set IPRoutesNetwork first. Please don't set IPRoutesNetwork to IPv6 and then Set IPRoutesGateway to IPv4, vice versa. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry. | ||||
| ClcsIPRoutesNextHopVLAN | 1.3.6.1.4.1.2356.14.1.4.4.1.1.6 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current Next Hop VLAN ID, range: 1-4094. Please set IPRoutesNetwork first. This entry only work when 1.network address is IPv6, 2.Gateway is link-local, 3.Interface of specific VLAN ID is IPv6. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry. | ||||
| ClcsIPRoutesRowStatus | 1.3.6.1.4.1.2356.14.1.4.4.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsIPStatusInterface | 1.3.6.1.4.1.2356.14.1.4.8 | |||
| TlcsIPStatusInterfaceTable | 1.3.6.1.4.1.2356.14.1.4.8.1 | NA | ||
table · not-accessible · current The system IP Status table to show all IP interfaces. | ||||
| RlcsIPStatusInterfaceEntry | 1.3.6.1.4.1.2356.14.1.4.8.1.1 | NA | ||
| ClcsIPStatusInterfaceIndex | 1.3.6.1.4.1.2356.14.1.4.8.1.1.1 | Integer32 (1..1024) | NA | |
column · Integer32 (1..1024) · not-accessible · current The entry of table to show all IP interfaces. | ||||
| ClcsIPStatusInterfaceName | 1.3.6.1.4.1.2356.14.1.4.8.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the interface. | ||||
| ClcsIPStatusInterfaceType | 1.3.6.1.4.1.2356.14.1.4.8.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The address type of the entry. This may be LINK or IPv4. | ||||
| ClcsIPStatusInterfaceAddress | 1.3.6.1.4.1.2356.14.1.4.8.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The current address of the interface (of the given type). | ||||
| ClcsIPStatusInterfaceStatus | 1.3.6.1.4.1.2356.14.1.4.8.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The status flags of the interface (and/or address). | ||||
| NlcsIPStatusRoute | 1.3.6.1.4.1.2356.14.1.4.9 | |||
| TlcsIPStatusRouteTable | 1.3.6.1.4.1.2356.14.1.4.9.1 | NA | ||
table · not-accessible · current The IP Status Route table show all routing entries. | ||||
| RlcsIPStatusRouteEntry | 1.3.6.1.4.1.2356.14.1.4.9.1.1 | NA | ||
| ClcsIPStatusRouteIndex | 1.3.6.1.4.1.2356.14.1.4.9.1.1.1 | Integer32 (1..2048) | NA | |
column · Integer32 (1..2048) · not-accessible · current The entry of table to show all routing entries. | ||||
| ClcsIPStatusRouteNetwork | 1.3.6.1.4.1.2356.14.1.4.9.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The destination IP network or host address of this route. | ||||
| ClcsIPStatusRouteGateway | 1.3.6.1.4.1.2356.14.1.4.9.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The gateway address of this route. | ||||
| ClcsIPStatusRouteAddress | 1.3.6.1.4.1.2356.14.1.4.9.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The route address. | ||||
| NlcsIPStatusNeighborCache | 1.3.6.1.4.1.2356.14.1.4.10 | |||
| TlcsIPStatusNeighborCacheTable | 1.3.6.1.4.1.2356.14.1.4.10.1 | NA | ||
table · not-accessible · current The Ip Status Neighbor Cache Table. | ||||
| RlcsIPStatusNeighborCacheEntry | 1.3.6.1.4.1.2356.14.1.4.10.1.1 | NA | ||
row · not-accessible · current An entry in the Ip Status Neighbor Cache Table. | ||||
| ClcsIPStatusNeighborCacheIndex | 1.3.6.1.4.1.2356.14.1.4.10.1.1.1 | Integer32 (1..1024) | NA | |
column · Integer32 (1..1024) · not-accessible · current The index for the Ip Status Neighbor Cache Table. | ||||
| ClcsIPStatusNeighborCacheIPAddress | 1.3.6.1.4.1.2356.14.1.4.10.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The IP address of the entry. | ||||
| ClcsIPStatusNeighborCacheLinkAddress | 1.3.6.1.4.1.2356.14.1.4.10.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The Link (MAC) address for which a binding to the IP address given exist. | ||||
| NlcsIPStatusDNSServer | 1.3.6.1.4.1.2356.14.1.4.11 | |||
| SlcsIPStatusDNSServerType | 1.3.6.1.4.1.2356.14.1.4.11.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current The configuration type of DNS server. | ||||
| SlcsIPStatusDNSServerIPAddress | 1.3.6.1.4.1.2356.14.1.4.11.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current The IP address of the DNS server. | ||||
| SlcsIPStatusDNSServerInterface | 1.3.6.1.4.1.2356.14.1.4.11.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The name of the interface. | ||||
| NlcsSyslog | 1.3.6.1.4.1.2356.14.1.5 | |||
| NlcsSyslogConf | 1.3.6.1.4.1.2356.14.1.5.1 | |||
| SlcsSystemLogServerMode | 1.3.6.1.4.1.2356.14.1.5.1.1 | AdminMode | RW | |
scalar · AdminMode · read-write · current The System log server mode admin state. | ||||
| SlcsSystemLogServerAddress | 1.3.6.1.4.1.2356.14.1.5.1.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current The Host address of syslog server. | ||||
| SlcsSystemLogServerPort | 1.3.6.1.4.1.2356.14.1.5.1.4 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current syslog service port number. range : 1-65535, default : 514. | ||||
| SlcsSystemLogIncludeHostname | 1.3.6.1.4.1.2356.14.1.5.1.150 | INTEGER | RW | |
scalar · INTEGER · read-write · current default: 0 0: disable 1: enable
| ||||
| NlcsSysLogInfo | 1.3.6.1.4.1.2356.14.1.5.2 | |||
| SlcsSystemLogInfoLevel | 1.3.6.1.4.1.2356.14.1.5.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Level input field is used to filter the display system log entries. 0: Emergency. 1: Alert. 2: Critical. 3: Error. 4: Warning. 5: Notice. 6: Information. 7: Debug. 8: All.
| ||||
| SlcsSystemLogInfoClearLevel | 1.3.6.1.4.1.2356.14.1.5.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Clear Level input field is used to specify which system log entries will be cleared. default: 8 (All). 0: Emergency. 1: Alert. 2: Critical. 3: Error. 4: Warning. 5: Notice. 6: Information. 7: Debug. 8: All.
| ||||
| SlcsSystemLogInfoClearCmd | 1.3.6.1.4.1.2356.14.1.5.2.3 | ActivateCmd | RW | |
scalar · ActivateCmd · read-write · current Command to clear the syslog. noAction(0) : do nothing (read only). activate(1) : Clear Syslog. | ||||
| TlcsSystemLogDetailedInfoTable | 1.3.6.1.4.1.2356.14.1.5.2.4 | NA | ||
table · not-accessible · current The system detailed Log Info table. | ||||
| RlcsSystemLogDetailedInfoEntry | 1.3.6.1.4.1.2356.14.1.5.2.4.1 | NA | ||
row · not-accessible · current An entry in the system detailed Log Info table. | ||||
| ClcsSystemLogDetailedSwitchIndex | 1.3.6.1.4.1.2356.14.1.5.2.4.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current The switch index for the system detailed Log Info table. | ||||
| ClcsSystemLogDetailedInfoID | 1.3.6.1.4.1.2356.14.1.5.2.4.1.2 | Integer32 (1..999) | NA | |
column · Integer32 (1..999) · not-accessible · current The index for the system detailed Log Info table. | ||||
| ClcsSystemLogDetailedInfoLevel | 1.3.6.1.4.1.2356.14.1.5.2.4.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The Info Level. | ||||
| ClcsSystemLogDetailedInfoTime | 1.3.6.1.4.1.2356.14.1.5.2.4.1.4 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current The time | ||||
| ClcsSystemLogDetailedInfoMessage | 1.3.6.1.4.1.2356.14.1.5.2.4.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The message of this entry. | ||||
| NlcsSnmp | 1.3.6.1.4.1.2356.14.1.6 | |||
| NlcsSnmpSystem | 1.3.6.1.4.1.2356.14.1.6.1 | |||
| SlcsSnmpSystemMode | 1.3.6.1.4.1.2356.14.1.6.1.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current SNMP mode operation. default : 1, 0: disable, 1: enable. | ||||
| SlcsSnmpSystemReadCommunity | 1.3.6.1.4.1.2356.14.1.6.1.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current Indicates the community read access string to permit access to SNMP agent. The allowed string length is 0 to 255. The field is applicable only when SNMP version is SNMPv1 or SNMPv2c. | ||||
| SlcsSnmpSystemWriteCommunity | 1.3.6.1.4.1.2356.14.1.6.1.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current Indicates the community write access string to permit access to SNMP agent. The allowed string length is 0 to 255. The field is applicable only when SNMP version is SNMPv1 or SNMPv2c. | ||||
| SlcsSnmpSystemWriteCommunityMode | 1.3.6.1.4.1.2356.14.1.6.1.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current SNMP write community mode operation. default : 1, 0: disable, 1: enable. | ||||
| SlcsSnmpSystemReadCommunityMode | 1.3.6.1.4.1.2356.14.1.6.1.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current SNMP read community mode operation. default : 1, 0: disable, 1: enable. | ||||
| TlcsTrapDestinationConfTable | 1.3.6.1.4.1.2356.14.1.6.3 | NA | ||
table · not-accessible · current A list of trap host entry. The numbers of entries are given by the value of TrapHostConfNumber. | ||||
| RlcsTrapDestinationConfEntry | 1.3.6.1.4.1.2356.14.1.6.3.1 | NA | ||
row · not-accessible · current This is the entry information for trap host. | ||||
| ClcsTrapDestinationConfIndex | 1.3.6.1.4.1.2356.14.1.6.3.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index of tarp destination configurations. | ||||
| ClcsTrapDestinationConfTrapConfigName | 1.3.6.1.4.1.2356.14.1.6.3.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Indicates which trap Configuration's name for configuring. The allowed string length is 0 to 255, and the allowed content is ASCII characters from 33 to 126. | ||||
| ClcsTrapDestinationConfTrapMode | 1.3.6.1.4.1.2356.14.1.6.3.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the SNMP mode operation. Possible modes are: 2: Enable TCP SNMP mode operation. 1: Enable UDP SNMP mode operation. 0: Disable SNMP mode operation. | ||||
| ClcsTrapDestinationConfTrapVersion | 1.3.6.1.4.1.2356.14.1.6.3.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current 0: snmpv1 1: snmpv2c 3: snmpv3. | ||||
| ClcsTrapDestinationConfTrapCommunity | 1.3.6.1.4.1.2356.14.1.6.3.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current Indicates the community access string when sending SNMP trap packet. The allowed string length is 0 to 255, and the allowed content is ASCII characters from 33 to 126. | ||||
| ClcsTrapDestinationConfTrapDestinationAddres | 1.3.6.1.4.1.2356.14.1.6.3.1.6 | DisplayString | RW | |
column · DisplayString · read-write · current Indicates the SNMP trap destination address.
It allow a valid IP address in dotted decimal notation ('x.y.z.w').
And it also allow a valid hostname.
A valid hostname is a string drawn from the alphabet (A-Za-z), digits (0-9),
dot (.), dash (-). Spaces are not allowed, the first character must be an alpha character,
and the first and last characters must not be a dot or a dash.
Indicates the SNMP trap destination IPv6 address.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits
with a colon separating each field (:).
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax
that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros;
but it can appear only once.
It can also represent a legally valid IPv4 address.
For example, '::192.1.2.34'. | ||||
| ClcsTrapDestinationConfTrapDestinationPort | 1.3.6.1.4.1.2356.14.1.6.3.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the SNMP trap destination port. SNMP Agent will send SNMP message via this port, the port range is 1~65535. | ||||
| ClcsTrapDestinationConfTrapSecurityEngineID | 1.3.6.1.4.1.2356.14.1.6.3.1.12 | DisplayString | RW | |
column · DisplayString · read-write · current Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for authentication and privacy. A unique engine ID for these traps and informs is needed. When Trap Probe Security Engine ID is enabled, the ID will be probed automatically. Otherwise, the ID specified in this field is used. The string must contain an even number(in hexadecimal format) with number of digits between 10 and 64, but all-zeros and all-'F's are not allowed. | ||||
| ClcsTrapDestinationConfTrapSecurityName | 1.3.6.1.4.1.2356.14.1.6.3.1.13 | DisplayString | RW | |
column · DisplayString · read-write · current Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for authentication and privacy. A unique security name is needed when traps and informs are enabled. This name from user name of user configuration. | ||||
| ClcsTrapDestinationConfTrapRowStatus | 1.3.6.1.4.1.2356.14.1.6.3.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsSNMPCommunityConfTable | 1.3.6.1.4.1.2356.14.1.6.5 | NA | ||
table · not-accessible · current A list of snmp community configuration entry. | ||||
| RlcsSNMPCommunityConfEntry | 1.3.6.1.4.1.2356.14.1.6.5.1 | NA | ||
row · not-accessible · current This is the entry information for snmp community configuration. | ||||
| ClcsSNMPCommunityConfIndex | 1.3.6.1.4.1.2356.14.1.6.5.1.1 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current Community configuration index. | ||||
| ClcsSNMPCommunityConfSNMPv3Community | 1.3.6.1.4.1.2356.14.1.6.5.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Indicates the community access string to permit access to SNMPv3 agent. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. The community string will be treated as security name and map a SNMPv1 or SNMPv2c community string. | ||||
| ClcsSNMPCommunityConfSNMPv3SourceIP | 1.3.6.1.4.1.2356.14.1.6.5.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current Indicates the SNMP access source address. A particular range of source addresses can be used to restrict source subnet when combined with source mask. | ||||
| ClcsSNMPCommunityConfSNMPv3SourceMask | 1.3.6.1.4.1.2356.14.1.6.5.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current Indicates the SNMP access source address mask. | ||||
| ClcsSNMPCommunityConfSNMPv3RowStatus | 1.3.6.1.4.1.2356.14.1.6.5.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsSNMPv3UserConfTable | 1.3.6.1.4.1.2356.14.1.6.6 | NA | ||
table · not-accessible · current A list of snmpv3 user configuration entry. | ||||
| RlcsSNMPv3UserConfEntry | 1.3.6.1.4.1.2356.14.1.6.6.1 | NA | ||
row · not-accessible · current This is the entry information for snmpv3 user configuration. | ||||
| ClcsSNMPv3UserConfIndex | 1.3.6.1.4.1.2356.14.1.6.6.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current User configuration index. | ||||
| ClcsSNMPv3UserConfEngineID | 1.3.6.1.4.1.2356.14.1.6.6.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current An octet string identifying the engine ID that this entry should belong to. The string must contain an even number(in hexadecimal format) with number of digits between 10 and 64, but all-zeros and all-'F's are not allowed. The SNMPv3 architecture uses the User-based Security Model (USM) for message security and the View-based Access Control Model (VACM) for access control. For the USM entry, the usmUserEngineID and usmUserName are the entry's keys. In a simple agent, usmUserEngineID is always that agent's own snmpEngineID value. The value can also take the value of the snmpEngineID of a remote SNMP engine with which this user can communicate. In other words, if user engine ID equal system engine ID then it is local user; otherwise it's remote user. | ||||
| ClcsSNMPv3UserConfUserName | 1.3.6.1.4.1.2356.14.1.6.6.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current A string identifying the user name that this entry should belong to. The allowed string length is 1 to 32, and the allowed contents are ASCII characters from 33 to 126. | ||||
| ClcsSNMPv3UserConfSecurityLevel | 1.3.6.1.4.1.2356.14.1.6.6.1.4 | SNMPv3SecurityLevel | RW | |
column · SNMPv3SecurityLevel · read-write · current SNMPv3 USM security level. | ||||
| ClcsSNMPv3UserConfAuthenticationProtocol | 1.3.6.1.4.1.2356.14.1.6.6.1.5 | SNMPv3AuthenticationProtocol | RW | |
column · SNMPv3AuthenticationProtocol · read-write · current SNMPv3 USM authentication protocol. | ||||
| ClcsSNMPv3UserConfAuthenticationPassword | 1.3.6.1.4.1.2356.14.1.6.6.1.6 | DisplayString | RW | |
column · DisplayString · read-write · current A string identifying the authentication password phrase. The allowed string length is 8 to 128, and the allowed contents are ASCII characters from 33 to 126. Does only read '*****' instead of the password or localized key. | ||||
| ClcsSNMPv3UserConfPrivacyProtocol | 1.3.6.1.4.1.2356.14.1.6.6.1.7 | SNMPv3PrivacyProtocol | RW | |
column · SNMPv3PrivacyProtocol · read-write · current SNMPv3 USM privacy protocol. | ||||
| ClcsSNMPv3UserConfPrivacyPassword | 1.3.6.1.4.1.2356.14.1.6.6.1.8 | DisplayString | RW | |
column · DisplayString · read-write · current A string identifying the privacy password phrase. The allowed string length is 8 to 128, and the allowed contents are ASCII characters from 33 to 126. Does only read '*****' instead of the password or localized key. | ||||
| ClcsSNMPv3UserConfRowStatus | 1.3.6.1.4.1.2356.14.1.6.6.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsSNMPv3GroupConfTable | 1.3.6.1.4.1.2356.14.1.6.7 | NA | ||
table · not-accessible · current A list of snmpv3 group configuration entry. | ||||
| RlcsSNMPv3GroupConfEntry | 1.3.6.1.4.1.2356.14.1.6.7.1 | NA | ||
row · not-accessible · current This is the entry information for snmpv3 group configuration. | ||||
| ClcsSNMPv3GroupConfIndex | 1.3.6.1.4.1.2356.14.1.6.7.1.1 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current Group configuration index. | ||||
| ClcsSNMPv3GroupConfSecurityModel | 1.3.6.1.4.1.2356.14.1.6.7.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current 1:v1 2:v2c 3:usm | ||||
| ClcsSNMPv3GroupConfSecurityName | 1.3.6.1.4.1.2356.14.1.6.7.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current A string identifying the security name that this entry should belong to. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. This name is from the Community of Community configuration. | ||||
| ClcsSNMPv3GroupConfGroupName | 1.3.6.1.4.1.2356.14.1.6.7.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current A string identifying the group name that this entry should belong to. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. | ||||
| ClcsSNMPv3GroupConfRowStatus | 1.3.6.1.4.1.2356.14.1.6.7.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsSNMPv3ViewsConfTable | 1.3.6.1.4.1.2356.14.1.6.8 | NA | ||
table · not-accessible · current A list of snmpv3 view configuration entry. | ||||
| RlcsSNMPv3ViewsConfEntry | 1.3.6.1.4.1.2356.14.1.6.8.1 | NA | ||
row · not-accessible · current This is the entry information for snmpv3 view configuration. | ||||
| ClcsSNMPv3ViewsConfIndex | 1.3.6.1.4.1.2356.14.1.6.8.1.1 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current view configuration index. | ||||
| ClcsSNMPv3ViewsConfViewName | 1.3.6.1.4.1.2356.14.1.6.8.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current A string identifying the view name that this entry should belong to. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. | ||||
| ClcsSNMPv3ViewsConfViewType | 1.3.6.1.4.1.2356.14.1.6.8.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current 0:included 1:excluded | ||||
| ClcsSNMPv3ViewsConfOIDSubtree | 1.3.6.1.4.1.2356.14.1.6.8.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current The OID defining the root of the subtree to add to the named view. The allowed OID length is 1 to 128. The allowed string content is digital number or asterisk(*) | ||||
| ClcsSNMPv3ViewsConfRowStatus | 1.3.6.1.4.1.2356.14.1.6.8.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsSNMPv3AccessConfTable | 1.3.6.1.4.1.2356.14.1.6.9 | NA | ||
table · not-accessible · current A list of snmpv3 access configuration entry. | ||||
| RlcsSNMPv3AccessConfEntry | 1.3.6.1.4.1.2356.14.1.6.9.1 | NA | ||
row · not-accessible · current This is the entry information for snmpv3 access configuration. | ||||
| ClcsSNMPv3AccessConfIndex | 1.3.6.1.4.1.2356.14.1.6.9.1.1 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current Access configuration index | ||||
| ClcsSNMPv3AccessConfGroupName | 1.3.6.1.4.1.2356.14.1.6.9.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Group name from Group configuration. | ||||
| ClcsSNMPv3AccessConfSecurityModel | 1.3.6.1.4.1.2356.14.1.6.9.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current 0:any 1:v1 2:v2c 3:usm | ||||
| ClcsSNMPv3AccessConfSecurityLevel | 1.3.6.1.4.1.2356.14.1.6.9.1.4 | SNMPv3SecurityLevel | RW | |
column · SNMPv3SecurityLevel · read-write · current SNMPv3 USM security level. | ||||
| ClcsSNMPv3AccessConfReadViewName | 1.3.6.1.4.1.2356.14.1.6.9.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current Read View Name from View configuration. | ||||
| ClcsSNMPv3AccessConfWriteViewName | 1.3.6.1.4.1.2356.14.1.6.9.1.6 | DisplayString | RW | |
column · DisplayString · read-write · current Write View Name from View configuration. | ||||
| ClcsSNMPv3AccessConfRowStatus | 1.3.6.1.4.1.2356.14.1.6.9.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsDHCPServer | 1.3.6.1.4.1.2356.14.1.9 | |||
| NlcsDHCPServerConfig | 1.3.6.1.4.1.2356.14.1.9.7 | |||
| TlcsDHCPServerConfigTable | 1.3.6.1.4.1.2356.14.1.9.7.1 | NA | ||
| RlcsDHCPServerConfigEntry | 1.3.6.1.4.1.2356.14.1.9.7.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsDHCPServerConfigIndex | 1.3.6.1.4.1.2356.14.1.9.7.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current table index. | ||||
| ClcsDHCPServerConfigInterfaceVLAN | 1.3.6.1.4.1.2356.14.1.9.7.1.1.2 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current The VLAN in which DHCP server is enabled or disabled. | ||||
| ClcsDHCPServerConfigInterfaceMode | 1.3.6.1.4.1.2356.14.1.9.7.1.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Indicate the operation mode per VLAN. 0:disable 1:enable | ||||
| ClcsDHCPServerConfigInterfaceStartIPEndIP | 1.3.6.1.4.1.2356.14.1.9.7.1.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current Please set SubnetMask first. Start IP and End IP. Format: x.x.x.x-x.x.x.x | ||||
| ClcsDHCPServerConfigInterfaceLeaseTime | 1.3.6.1.4.1.2356.14.1.9.7.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The lease time in second. | ||||
| ClcsDHCPServerConfigInterfaceSubnetMask | 1.3.6.1.4.1.2356.14.1.9.7.1.1.7 | IpAddress | RW | |
column · IpAddress · read-write · current Configure subnet mask of the DHCP address. | ||||
| ClcsDHCPServerConfigInterfaceDefaultRouter | 1.3.6.1.4.1.2356.14.1.9.7.1.1.8 | IpAddress | RW | |
column · IpAddress · read-write · current Configure the destination IP network or host address of the default route. | ||||
| ClcsDHCPServerConfigInterfaceDNSServer | 1.3.6.1.4.1.2356.14.1.9.7.1.1.9 | IpAddress | RW | |
column · IpAddress · read-write · current Configure the default DNS server. | ||||
| NlcsDHCPServerStatus | 1.3.6.1.4.1.2356.14.1.9.8 | |||
| TlcsDHCPServerStatusTable | 1.3.6.1.4.1.2356.14.1.9.8.1 | NA | ||
| RlcsDHCPServerStatusEntry | 1.3.6.1.4.1.2356.14.1.9.8.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsDHCPServerStatusIndex | 1.3.6.1.4.1.2356.14.1.9.8.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current table index. | ||||
| ClcsDHCPServerStatusInterfaceVLAN | 1.3.6.1.4.1.2356.14.1.9.8.1.1.2 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current The VLAN in which DHCP server is enabled or disabled. | ||||
| ClcsDHCPServerStatusInterfaceType | 1.3.6.1.4.1.2356.14.1.9.8.1.1.3 | DisplayString | RO | |
| ClcsDHCPServerStatusInterfaceStartIP | 1.3.6.1.4.1.2356.14.1.9.8.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Start IP | ||||
| ClcsDHCPServerStatusInterfaceEndIP | 1.3.6.1.4.1.2356.14.1.9.8.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current End IP | ||||
| ClcsDHCPServerStatusInterfaceLeaseTime | 1.3.6.1.4.1.2356.14.1.9.8.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The lease time in second. | ||||
| ClcsDHCPServerStatusInterfaceSubnetMask | 1.3.6.1.4.1.2356.14.1.9.8.1.1.7 | IpAddress | RO | |
column · IpAddress · read-only · current Configure subnet mask of the DHCP address. | ||||
| ClcsDHCPServerStatusInterfaceDefaultRouter | 1.3.6.1.4.1.2356.14.1.9.8.1.1.8 | IpAddress | RO | |
column · IpAddress · read-only · current Configure the destination IP network or host address of the default route. | ||||
| ClcsDHCPServerStatusInterfaceDNSServer | 1.3.6.1.4.1.2356.14.1.9.8.1.1.9 | IpAddress | RO | |
column · IpAddress · read-only · current Configure the default DNS server. | ||||
| NlcsVLANConf | 1.3.6.1.4.1.2356.14.1.10 | |||
| NlcsVLAN | 1.3.6.1.4.1.2356.14.1.10.2 | |||
| SlcsVlanExistingVLANs | 1.3.6.1.4.1.2356.14.1.10.2.1 | DisplayString | RW | |
scalar · DisplayString · read-write · current This field shows the VLANs that are created on the switch. More VLANs may be created by using a list syntax where the individual elements are separated by commas. Ranges are specified with a dash separating the lower and upper bound. The following example will create VLANs 1, 10, 11, 12 , 13, 200, and 300: 1,10-13,200,300. default: 1. | ||||
| SlcsVlanEthertypeforCustomSPorts | 1.3.6.1.4.1.2356.14.1.10.2.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current This field specifies the ethertype/TPID (specified in hexadecimal) used for Custom S-ports. The setting is in force for all ports whose Port Type is set to S-Custom-Port. range: 0600-ffff, default: 88a8. | ||||
| TlcsVlanTable | 1.3.6.1.4.1.2356.14.1.10.2.3 | NA | ||
table · not-accessible · current Configure Vlan ports Configuration mode. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsVlanEntry | 1.3.6.1.4.1.2356.14.1.10.2.3.1 | NA | ||
| ClcsVlanMode | 1.3.6.1.4.1.2356.14.1.10.2.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The port mode determines the fundamental behavior of the port in question. A port can be in one of three modes as described below. 0: access, 1: trunk, 2: hybrid.
| ||||
| ClcsVlanPortVLAN | 1.3.6.1.4.1.2356.14.1.10.2.3.1.3 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current Determines the port's VLAN ID (a.k.a. PVID). range: 1-4094, default: 1. | ||||
| ClcsVlanPortType | 1.3.6.1.4.1.2356.14.1.10.2.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Ports in hybrid mode allow for changing the port type, that is, whether a frame's VLAN tag is used to classify the frame on ingress to a particular VLAN, and if so, which TPID it reacts on. Likewise, on egress, the Port Type determines the TPID of the tag, if a tag is required. 0: unaware, 1: c-Port, 2: s-Port, 3: s-Custom-Port.
| ||||
| ClcsVlanIngressFiltering | 1.3.6.1.4.1.2356.14.1.10.2.3.1.5 | AdminMode | RW | |
column · AdminMode · read-write · current Hybrid ports allow for changing ingress filtering. Access and Trunk ports always have ingress filtering enabled.If ingress filtering is enabled, frames classified to a VLAN that the port is not a member of get discarded. | ||||
| ClcsVlanIngressAcceptance | 1.3.6.1.4.1.2356.14.1.10.2.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Hybrid ports allow for changing the type of frames that are accepted on ingress. 0: Tagged and Untagged, 1: Tagged Only, 2: Untagged Only.
| ||||
| ClcsVlanEgressTagging | 1.3.6.1.4.1.2356.14.1.10.2.3.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Ports in Trunk and Hybrid mode may control the tagging of frames on egress. 0: Untag Port VLAN, 1: Tag All, 2: Untag All.
| ||||
| ClcsVlanAllowedVLANs | 1.3.6.1.4.1.2356.14.1.10.2.3.1.9 | DisplayString | RW | |
column · DisplayString · read-write · current Ports in Trunk and Hybrid mode may control which VLANs they are allowed to become members of. Access ports can only be member of one VLAN, the Access VLAN. range: 1~4094. '-': Allowed VLANs is empty. | ||||
| ClcsVlanForbiddenVLANs | 1.3.6.1.4.1.2356.14.1.10.2.3.1.10 | DisplayString | RW | |
column · DisplayString · read-write · current A port may be configured to never be member of one or more VLANs. This is particularly useful when dynamic VLAN protocols like MVRP and GVRP must be prevented from dynamically adding ports to VLANs. range: 1~4094. '-': Forbidden VLANs is empty. | ||||
| NlcsVlanStatus | 1.3.6.1.4.1.2356.14.1.10.2.6 | |||
| TlcsVLANMembershipStatusTable | 1.3.6.1.4.1.2356.14.1.10.2.6.1 | NA | ||
table · not-accessible · current Vlan membership Status table. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsVLANMembershipStatusEntry | 1.3.6.1.4.1.2356.14.1.10.2.6.1.1 | NA | ||
| ClcsVLANMembershipVlanID | 1.3.6.1.4.1.2356.14.1.10.2.6.1.1.2 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current VLAN ID for which the Port members are displayed. | ||||
| ClcsVLANMembershipStatus | 1.3.6.1.4.1.2356.14.1.10.2.6.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current portIsNotInVlan(0): A port is nothing in a VLAN. portIncludedInVlan(1): A port is included in a VLAN. portInForbiddenPortList(2): A port is in the forbidden port list. portInForbiddenPortListAndVlan(3): A port is in the forbidden port list and at the same time attempted included in the VLAN.
| ||||
| TlcsVLANPortStatusTable | 1.3.6.1.4.1.2356.14.1.10.2.6.2 | NA | ||
table · not-accessible · current The vlan port status table. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsVLANPortStatusEntry | 1.3.6.1.4.1.2356.14.1.10.2.6.2.1 | NA | ||
| ClcsVLANPortStatusPortType | 1.3.6.1.4.1.2356.14.1.10.2.6.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Shows the port type (Unaware, C-Port, S-Port, S-Custom-Port.) that a given user wants to configure on the port.The field is empty if not overridden by the selected user. | ||||
| ClcsVLANPortStatusIngressFiltering | 1.3.6.1.4.1.2356.14.1.10.2.6.2.1.3 | AdminMode | RO | |
column · AdminMode · read-only · current Shows whether a given user wants ingress filtering enabled or not. | ||||
| ClcsVLANPortStatusFrameType | 1.3.6.1.4.1.2356.14.1.10.2.6.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Shows the acceptable frame types (All, Taged, Untagged) that a given user wants to configure on the port. The field is empty if not overridden by the selected user. | ||||
| ClcsVLANPortStatusPortVLANID | 1.3.6.1.4.1.2356.14.1.10.2.6.2.1.5 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current Shows the Port VLAN ID (PVID) that a given user wants the port to have. The field is 0 if not overridden by the selected user. | ||||
| ClcsVLANPortStatusTxTag | 1.3.6.1.4.1.2356.14.1.10.2.6.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Shows the Tx Tag requirements (Tag All, Tag PVID, Tag UVID, Untag All, Untag PVID, Untag UVID) that a given user has on a port.The field is empty if not overridden by the selected user. | ||||
| ClcsVLANPortStatusUntaggedVLANID | 1.3.6.1.4.1.2356.14.1.10.2.6.2.1.7 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current If Tx Tag is overridden by the selected user and is set to Tag or Untag UVID, then this field will show the VLAN ID the user wants to tag or untag on egress. The field is 0 if not overridden by the selected user. | ||||
| ClcsVLANPortStatusConflicts | 1.3.6.1.4.1.2356.14.1.10.2.6.2.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Two users may have conflicting requirements to a port's configuration. For instance, one user may require all frames to be tagged on egress while another requires all frames to be untagged on egress.Since both users cannot win, this gives rise to a conflict, which is solved in a prioritized way. The Administrator has the least priority. Other software modules are prioritized according to their position in the drop-down list: The higher in the list, the higher priority. If conflicts exist, it will be displayed as 'Yes'. | ||||
| NlcsMacBaesdVlanMembershipConfig | 1.3.6.1.4.1.2356.14.1.10.2.7 | |||
| TlcsMacBaesdVlanMembershipConfigTable | 1.3.6.1.4.1.2356.14.1.10.2.7.1 | NA | ||
table · not-accessible · current Mac-Based VLAN Membership table | ||||
| RlcsMacBaesdVlanMembershipConfigEntry | 1.3.6.1.4.1.2356.14.1.10.2.7.1.1 | NA | ||
row · not-accessible · current Mac-Based VLAN Membership table. | ||||
| ClcsMacBaesdVlanMembershipConfigIndex | 1.3.6.1.4.1.2356.14.1.10.2.7.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Mac-Based VLAN membership index. | ||||
| ClcsMacBaesdVlanMembershipConfigMACAddress | 1.3.6.1.4.1.2356.14.1.10.2.7.1.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current MAC address: xx-xx-xx-xx-xx-xx. | ||||
| ClcsMacBaesdVlanMembershipConfigVLANID | 1.3.6.1.4.1.2356.14.1.10.2.7.1.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current VLAN ID | ||||
| ClcsMacBaesdVlanMembershipConfigPortMembers | 1.3.6.1.4.1.2356.14.1.10.2.7.1.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current 0:remove or exclude the port from the mapping 1:include a port in the mapping | ||||
| ClcsMacBaesdVlanMembershipConfigRowStatus | 1.3.6.1.4.1.2356.14.1.10.2.7.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| SlcsMacBaesdVlanMembershipStatusUser | 1.3.6.1.4.1.2356.14.1.10.2.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current MAC-based VLAN Membership Status User | ||||
| NlcsMacBaesdVlanMembershipStatus | 1.3.6.1.4.1.2356.14.1.10.2.9 | |||
| TlcsMacBaesdVlanMembershipStatusTable | 1.3.6.1.4.1.2356.14.1.10.2.9.1 | NA | ||
table · not-accessible · current Mac-Based VLAN Membership table | ||||
| RlcsMacBaesdVlanMembershipStatusEntry | 1.3.6.1.4.1.2356.14.1.10.2.9.1.1 | NA | ||
row · not-accessible · current Mac-Based VLAN Membership table. | ||||
| ClcsMacBaesdVlanMembershipStatusIndex | 1.3.6.1.4.1.2356.14.1.10.2.9.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Mac-Based VLAN membership index. | ||||
| ClcsMacBaesdVlanMembershipStatusMACAddress | 1.3.6.1.4.1.2356.14.1.10.2.9.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current MAC address: xx-xx-xx-xx-xx-xx. | ||||
| ClcsMacBaesdVlanMembershipStatusVLANID | 1.3.6.1.4.1.2356.14.1.10.2.9.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsMacBaesdVlanMembershipStatusPortMembers | 1.3.6.1.4.1.2356.14.1.10.2.9.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current 0:remove or exclude the port from the mapping 1:include a port in the mapping | ||||
| NlcsProtocolbasedVLANConfig | 1.3.6.1.4.1.2356.14.1.10.2.10 | |||
| TlcsProtocolbasedVLANConfigTable | 1.3.6.1.4.1.2356.14.1.10.2.10.1 | NA | ||
table · not-accessible · current Protocol-based VLAN Config table | ||||
| RlcsProtocolbasedVLANConfigEntry | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1 | NA | ||
| ClcsProtocolbasedVLANConfigIndex | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Protocol-based VLAN Config index. | ||||
| ClcsProtocolbasedVLANConfigFrameType | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Frame Type. 1:Ethernet 2:LLC 3:SNAP | ||||
| ClcsProtocolbasedVLANConfigValueEthernetEtype | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current Ethernet Etype. Valid values for etype range between 0x0600 and 0xffff | ||||
| ClcsProtocolbasedVLANConfigValueSNAPOUI | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current SNAP OUI. Format:xx-xx-xx | ||||
| ClcsProtocolbasedVLANConfigValueSNAPPID | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current SNAP PID Ranging between 0x00 and 0xff. | ||||
| ClcsProtocolbasedVLANConfigValueLLCDSAP | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.6 | DisplayString | RC | |
column · DisplayString · read-create · current LLC DSAP. Range: 0x00-0xff | ||||
| ClcsProtocolbasedVLANConfigValueLLCSSAP | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.7 | DisplayString | RC | |
column · DisplayString · read-create · current LLC SSAP. Range: 0x00-0xff | ||||
| ClcsProtocolbasedVLANConfigGroupName | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.8 | DisplayString | RC | |
column · DisplayString · read-create · current Group Name 16-character long string, unique for every entry, which consists of a combination of alphabets (a-z or A-Z) and integers(0-9). | ||||
| ClcsProtocolbasedVLANConfigRowStatus | 1.3.6.1.4.1.2356.14.1.10.2.10.1.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| TlcsGroupNameToVLANMappingConfigTable | 1.3.6.1.4.1.2356.14.1.10.2.10.2 | NA | ||
table · not-accessible · current Group Name To VLAN Mapping Config table | ||||
| RlcsGroupNameToVLANMappingConfigEntry | 1.3.6.1.4.1.2356.14.1.10.2.10.2.1 | NA | ||
row · not-accessible · current Group Name To VLAN Mapping Config table. | ||||
| ClcsGroupNameToVLANMappingConfigIndex | 1.3.6.1.4.1.2356.14.1.10.2.10.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Group Name To VLAN Mapping Config index. | ||||
| ClcsGroupNameToVLANMappingConfigGroupName | 1.3.6.1.4.1.2356.14.1.10.2.10.2.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current Group Name 16-character long string, unique for every entry, which consists of a combination of alphabets (a-z or A-Z) and integers(0-9). | ||||
| ClcsGroupNameToVLANMappingConfigVLANID | 1.3.6.1.4.1.2356.14.1.10.2.10.2.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current VLAN ID | ||||
| ClcsGroupNameToVLANMappingConfigPortMembers | 1.3.6.1.4.1.2356.14.1.10.2.10.2.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current 0:remove or exclude the port from the mapping 1:include a port in the mapping | ||||
| ClcsGroupNameToVLANMappingConfigRowStatus | 1.3.6.1.4.1.2356.14.1.10.2.10.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| NlcsIPSubnetBasedVLANConfig | 1.3.6.1.4.1.2356.14.1.10.2.11 | |||
| TlcsIPSubnetBasedVLANConfigTable | 1.3.6.1.4.1.2356.14.1.10.2.11.1 | NA | ||
table · not-accessible · current IP Subnet Based VLAN Config table | ||||
| RlcsIPSubnetBasedVLANConfigEntry | 1.3.6.1.4.1.2356.14.1.10.2.11.1.1 | NA | ||
row · not-accessible · current IP Subnet Based VLAN Config table. | ||||
| ClcsIPSubnetBasedVLANConfigIndex | 1.3.6.1.4.1.2356.14.1.10.2.11.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current IP Subnet Based VLAN Config index. | ||||
| ClcsIPSubnetBasedVLANConfigIPAddress | 1.3.6.1.4.1.2356.14.1.10.2.11.1.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet's IP address | ||||
| ClcsIPSubnetBasedVLANConfigMaskLength | 1.3.6.1.4.1.2356.14.1.10.2.11.1.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The subnet's mask length. | ||||
| ClcsIPSubnetBasedVLANConfigVLANID | 1.3.6.1.4.1.2356.14.1.10.2.11.1.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current VLAN ID | ||||
| ClcsIPSubnetBasedVLANConfigPortMembers | 1.3.6.1.4.1.2356.14.1.10.2.11.1.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current 0:remove or exclude the port from the mapping 1:include a port in the mapping | ||||
| ClcsIPSubnetBasedVLANConfigRowStatus | 1.3.6.1.4.1.2356.14.1.10.2.11.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| NlcsVLANNameConfig | 1.3.6.1.4.1.2356.14.1.10.2.12 | |||
| TlcsVLANNameConfigTable | 1.3.6.1.4.1.2356.14.1.10.2.12.1 | NA | ||
table · not-accessible · current VLAN Name Config table | ||||
| RlcsVLANNameConfigEntry | 1.3.6.1.4.1.2356.14.1.10.2.12.1.1 | NA | ||
| ClcsVLANNameConfigIndex | 1.3.6.1.4.1.2356.14.1.10.2.12.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current VLAN Name Config index. | ||||
| ClcsVLANNameConfigVLANName | 1.3.6.1.4.1.2356.14.1.10.2.12.1.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current VLAN Name. | ||||
| NlcsNTPConf | 1.3.6.1.4.1.2356.14.1.12 | |||
| SlcsNTPConfigMode | 1.3.6.1.4.1.2356.14.1.12.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The system NTP Mode. useLocal(0) : Use Local Settings, useNTP(1) : Use NTP Server.
| ||||
| SlcsNTPConfigTimeSyncInterval | 1.3.6.1.4.1.2356.14.1.12.3 | Integer32 (5 | 10 | 15 | 30 | 60 | 120) | RW | |
scalar · Integer32 (5 | 10 | 15 | 30 | 60 | 120) · read-write · current Time-Sync Interval. Valid values are restricted to 5,10,15,30,60,120 minutes. | ||||
| SlcsNTPConfigServerAddress1 | 1.3.6.1.4.1.2356.14.1.12.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current Provide the IPv4 or IPv6 address of a NTP server. | ||||
| SlcsNTPConfigServerAddress2 | 1.3.6.1.4.1.2356.14.1.12.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current Provide the IPv4 or IPv6 address of a NTP server. | ||||
| SlcsNTPConfigServerAddress3 | 1.3.6.1.4.1.2356.14.1.12.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current Provide the IPv4 or IPv6 address of a NTP server. | ||||
| SlcsNTPConfigServerAddress4 | 1.3.6.1.4.1.2356.14.1.12.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current Provide the IPv4 or IPv6 address of a NTP server. | ||||
| SlcsNTPConfigServerAddress5 | 1.3.6.1.4.1.2356.14.1.12.8 | DisplayString | RW | |
scalar · DisplayString · read-write · current Provide the IPv4 or IPv6 address of a NTP server. | ||||
| NlcsConfiguration | 1.3.6.1.4.1.2356.14.2 | |||
| NlcsPort | 1.3.6.1.4.1.2356.14.2.1 | |||
| TlcsPortConfigurationTable | 1.3.6.1.4.1.2356.14.2.1.1 | NA | ||
table · not-accessible · current Show port configurations. | ||||
| RlcsPortConfigurationEntry | 1.3.6.1.4.1.2356.14.2.1.1.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsPortConfPort | 1.3.6.1.4.1.2356.14.2.1.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port, range : 1 - port number. | ||||
| ClcsPortConfDescription | 1.3.6.1.4.1.2356.14.2.1.1.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Interface specific description. Up to 47 characters describing this interface. | ||||
| ClcsPortConfLink | 1.3.6.1.4.1.2356.14.2.1.1.1.3 | DisplayString (SIZE (2..4)) | RO | |
column · DisplayString (SIZE (2..4)) · read-only · current The current link state. | ||||
| ClcsPortConfSpeedStatus | 1.3.6.1.4.1.2356.14.2.1.1.1.4 | DisplayString (SIZE (6..12)) | RO | |
column · DisplayString (SIZE (6..12)) · read-only · current The current link speed of the port. | ||||
| ClcsPortConfSpeedMode | 1.3.6.1.4.1.2356.14.2.1.1.1.5 | Integer32 (0..19) | RW | |
column · Integer32 (0..19) · read-write · current 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, 7: SFP_Auto_AMS, 8: 100FX_AMS, 9: 1000X_AMS, 10: 100-FX, 11: 1000-X, 12: 10G Full, 13: Auto (2.5G/1G), 14: Auto (2.5G/100M), 15: Auto (2.5G), 16: Auto (1G/100M), 17: Auto (1G), 18: Auto (100M), 19: 2.5G Full. | ||||
| ClcsPortConfFlowControlRxStatus | 1.3.6.1.4.1.2356.14.2.1.1.1.6 | Integer32 (0 | 1) | RO | |
column · Integer32 (0 | 1) · read-only · current 0: disable 1: enable 2: not support. | ||||
| ClcsPortConfFlowControlTxStatus | 1.3.6.1.4.1.2356.14.2.1.1.1.7 | Integer32 (0 | 1) | RO | |
column · Integer32 (0 | 1) · read-only · current 0: disable 1: enable 2: not support. | ||||
| ClcsPortConfFlowControlMode | 1.3.6.1.4.1.2356.14.2.1.1.1.8 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current default: 0, 0: disable 1: enable 2: not support. | ||||
| ClcsPortConfMaximumFrameSize | 1.3.6.1.4.1.2356.14.2.1.1.1.9 | Integer32 (1518..10240) | RW | |
column · Integer32 (1518..10240) · read-write · current default: 10240 , range : 1518 - 10240 | ||||
| TlcsPortTrafficStatisticsTable | 1.3.6.1.4.1.2356.14.2.1.2 | NA | ||
| RlcsPortTrafficStatisticsEntry | 1.3.6.1.4.1.2356.14.2.1.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPortTrafficStatisticsPort | 1.3.6.1.4.1.2356.14.2.1.2.1.1 | Integer32 (1..4094) | NA | |
| ClcsPortTrafficStatisticsClear | 1.3.6.1.4.1.2356.14.2.1.2.1.2 | Integer32 (0 | 1) | RW | |
| ClcsPortTrafficRxPackets | 1.3.6.1.4.1.2356.14.2.1.2.1.3 | Counter64 | RO | |
| ClcsPortTrafficRxOctets | 1.3.6.1.4.1.2356.14.2.1.2.1.4 | Counter64 | RO | |
| ClcsPortTrafficRxUnicast | 1.3.6.1.4.1.2356.14.2.1.2.1.5 | Counter64 | RO | |
| ClcsPortTrafficRxMulticast | 1.3.6.1.4.1.2356.14.2.1.2.1.6 | Counter64 | RO | |
| ClcsPortTrafficRxBroadcast | 1.3.6.1.4.1.2356.14.2.1.2.1.7 | Counter64 | RO | |
| ClcsPortTrafficRxPause | 1.3.6.1.4.1.2356.14.2.1.2.1.8 | Counter64 | RO | |
| ClcsPortTrafficRx64Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.9 | Counter64 | RO | |
| ClcsPortTrafficRx65to127Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.10 | Counter64 | RO | |
| ClcsPortTrafficRx128to255Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.11 | Counter64 | RO | |
| ClcsPortTrafficRx256to511Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.12 | Counter64 | RO | |
| ClcsPortTrafficRx512to1023Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.13 | Counter64 | RO | |
| ClcsPortTrafficRx1024to1526Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.14 | Counter64 | RO | |
| ClcsPortTrafficRxExceecd1527Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.15 | Counter64 | RO | |
| ClcsPortTrafficRxQ0 | 1.3.6.1.4.1.2356.14.2.1.2.1.16 | Counter64 | RO | |
| ClcsPortTrafficRxQ1 | 1.3.6.1.4.1.2356.14.2.1.2.1.17 | Counter64 | RO | |
| ClcsPortTrafficRxQ2 | 1.3.6.1.4.1.2356.14.2.1.2.1.18 | Counter64 | RO | |
| ClcsPortTrafficRxQ3 | 1.3.6.1.4.1.2356.14.2.1.2.1.19 | Counter64 | RO | |
| ClcsPortTrafficRxQ4 | 1.3.6.1.4.1.2356.14.2.1.2.1.20 | Counter64 | RO | |
| ClcsPortTrafficRxQ5 | 1.3.6.1.4.1.2356.14.2.1.2.1.21 | Counter64 | RO | |
| ClcsPortTrafficRxQ6 | 1.3.6.1.4.1.2356.14.2.1.2.1.22 | Counter64 | RO | |
| ClcsPortTrafficRxQ7 | 1.3.6.1.4.1.2356.14.2.1.2.1.23 | Counter64 | RO | |
| ClcsPortTrafficRxDrops | 1.3.6.1.4.1.2356.14.2.1.2.1.24 | Counter64 | RO | |
| ClcsPortTrafficRxCRCorAlignment | 1.3.6.1.4.1.2356.14.2.1.2.1.25 | Counter64 | RO | |
| ClcsPortTrafficRxUndersize | 1.3.6.1.4.1.2356.14.2.1.2.1.26 | Counter64 | RO | |
| ClcsPortTrafficRxOversize | 1.3.6.1.4.1.2356.14.2.1.2.1.27 | Counter64 | RO | |
| ClcsPortTrafficRxFragments | 1.3.6.1.4.1.2356.14.2.1.2.1.28 | Counter64 | RO | |
| ClcsPortTrafficRxJabber | 1.3.6.1.4.1.2356.14.2.1.2.1.29 | Counter64 | RO | |
| ClcsPortTrafficRxFiltered | 1.3.6.1.4.1.2356.14.2.1.2.1.30 | Counter64 | RO | |
| ClcsPortTrafficTxPackets | 1.3.6.1.4.1.2356.14.2.1.2.1.31 | Counter64 | RO | |
| ClcsPortTrafficTxOctets | 1.3.6.1.4.1.2356.14.2.1.2.1.32 | Counter64 | RO | |
| ClcsPortTrafficTxUnicast | 1.3.6.1.4.1.2356.14.2.1.2.1.33 | Counter64 | RO | |
| ClcsPortTrafficTxMulticast | 1.3.6.1.4.1.2356.14.2.1.2.1.34 | Counter64 | RO | |
| ClcsPortTrafficTxBroadcast | 1.3.6.1.4.1.2356.14.2.1.2.1.35 | Counter64 | RO | |
| ClcsPortTrafficTxPause | 1.3.6.1.4.1.2356.14.2.1.2.1.36 | Counter64 | RO | |
| ClcsPortTrafficTx64Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.37 | Counter64 | RO | |
| ClcsPortTrafficTx65to127Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.38 | Counter64 | RO | |
| ClcsPortTrafficTx128to255Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.39 | Counter64 | RO | |
| ClcsPortTrafficTx256to511Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.40 | Counter64 | RO | |
| ClcsPortTrafficTx512to1023Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.41 | Counter64 | RO | |
| ClcsPortTrafficTx1024to1526Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.42 | Counter64 | RO | |
| ClcsPortTrafficTxExceecd1527Bytes | 1.3.6.1.4.1.2356.14.2.1.2.1.43 | Counter64 | RO | |
| ClcsPortTrafficTxQ0 | 1.3.6.1.4.1.2356.14.2.1.2.1.44 | Counter64 | RO | |
| ClcsPortTrafficTxQ1 | 1.3.6.1.4.1.2356.14.2.1.2.1.45 | Counter64 | RO | |
| ClcsPortTrafficTxQ2 | 1.3.6.1.4.1.2356.14.2.1.2.1.46 | Counter64 | RO | |
| ClcsPortTrafficTxQ3 | 1.3.6.1.4.1.2356.14.2.1.2.1.47 | Counter64 | RO | |
| ClcsPortTrafficTxQ4 | 1.3.6.1.4.1.2356.14.2.1.2.1.48 | Counter64 | RO | |
| ClcsPortTrafficTxQ5 | 1.3.6.1.4.1.2356.14.2.1.2.1.49 | Counter64 | RO | |
| ClcsPortTrafficTxQ6 | 1.3.6.1.4.1.2356.14.2.1.2.1.50 | Counter64 | RO | |
| ClcsPortTrafficTxQ7 | 1.3.6.1.4.1.2356.14.2.1.2.1.51 | Counter64 | RO | |
| ClcsPortTrafficTxDrops | 1.3.6.1.4.1.2356.14.2.1.2.1.52 | Counter64 | RO | |
| ClcsPortTrafficTxLateOrExcColl | 1.3.6.1.4.1.2356.14.2.1.2.1.53 | Counter64 | RO | |
| NlcsPortQoSStatistics | 1.3.6.1.4.1.2356.14.2.1.3 | |||
| SlcsPortQoSStatisticsClear | 1.3.6.1.4.1.2356.14.2.1.3.1 | Integer32 (0 | 1) | RO | |
scalar · Integer32 (0 | 1) · read-only · current default: 0 0: none 1: clear | ||||
| TlcsPortQoSStatisticsTable | 1.3.6.1.4.1.2356.14.2.1.3.2 | NA | ||
| RlcsPortQoSStatisticsEntry | 1.3.6.1.4.1.2356.14.2.1.3.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPortQoSStatisticsPort | 1.3.6.1.4.1.2356.14.2.1.3.2.1.1 | Integer32 (1..4094) | NA | |
| ClcsPortQoSQ0Rx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.2 | Counter64 | RO | |
| ClcsPortQoSQ0Tx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.3 | Counter64 | RO | |
| ClcsPortQoSQ1Rx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.4 | Counter64 | RO | |
| ClcsPortQoSQ1Tx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.5 | Counter64 | RO | |
| ClcsPortQoSQ2Rx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.6 | Counter64 | RO | |
| ClcsPortQoSQ2Tx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.7 | Counter64 | RO | |
| ClcsPortQoSQ3Rx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.8 | Counter64 | RO | |
| ClcsPortQoSQ3Tx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.9 | Counter64 | RO | |
| ClcsPortQoSQ4Rx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.10 | Counter64 | RO | |
| ClcsPortQoSQ4Tx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.11 | Counter64 | RO | |
| ClcsPortQoSQ5Rx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.12 | Counter64 | RO | |
| ClcsPortQoSQ5Tx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.13 | Counter64 | RO | |
| ClcsPortQoSQ6Rx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.14 | Counter64 | RO | |
| ClcsPortQoSQ6Tx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.15 | Counter64 | RO | |
| ClcsPortQoSQ7Rx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.16 | Counter64 | RO | |
| ClcsPortQoSQ7Tx | 1.3.6.1.4.1.2356.14.2.1.3.2.1.17 | Counter64 | RO | |
| TlcsSFPInfoTable | 1.3.6.1.4.1.2356.14.2.1.4 | NA | ||
| RlcsSFPInfoEntry | 1.3.6.1.4.1.2356.14.2.1.4.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsSFPInfoIndex | 1.3.6.1.4.1.2356.14.2.1.4.1.1 | Integer32 (1..4094) | NA | |
| ClcsSFPInfoPort | 1.3.6.1.4.1.2356.14.2.1.4.1.2 | DisplayString | RO | |
| ClcsSFPConnectorType | 1.3.6.1.4.1.2356.14.2.1.4.1.3 | DisplayString | RO | |
| ClcsSFPFiberType | 1.3.6.1.4.1.2356.14.2.1.4.1.4 | DisplayString | RO | |
| ClcsSFPTxCentralWavelength | 1.3.6.1.4.1.2356.14.2.1.4.1.5 | DisplayString | RO | |
| ClcsSFPBaudRate | 1.3.6.1.4.1.2356.14.2.1.4.1.6 | DisplayString | RO | |
| ClcsSFPVendorOUI | 1.3.6.1.4.1.2356.14.2.1.4.1.7 | DisplayString | RO | |
| ClcsSFPVendorName | 1.3.6.1.4.1.2356.14.2.1.4.1.8 | DisplayString | RO | |
| ClcsSFPVendorPN | 1.3.6.1.4.1.2356.14.2.1.4.1.9 | DisplayString | RO | |
| ClcsSFPVendorRev | 1.3.6.1.4.1.2356.14.2.1.4.1.10 | DisplayString | RO | |
| ClcsSFPVendorSN | 1.3.6.1.4.1.2356.14.2.1.4.1.11 | DisplayString | RO | |
| ClcsSFPDateCode | 1.3.6.1.4.1.2356.14.2.1.4.1.12 | DisplayString | RO | |
| ClcsSFPTemperature | 1.3.6.1.4.1.2356.14.2.1.4.1.13 | DisplayString | RO | |
| ClcsSFPVcc | 1.3.6.1.4.1.2356.14.2.1.4.1.14 | DisplayString | RO | |
| ClcsSFPMon1Bias | 1.3.6.1.4.1.2356.14.2.1.4.1.15 | DisplayString | RO | |
| ClcsSFPMon2TxPWR | 1.3.6.1.4.1.2356.14.2.1.4.1.16 | DisplayString | RO | |
| ClcsSFPMon3RxPWR | 1.3.6.1.4.1.2356.14.2.1.4.1.17 | DisplayString | RO | |
| NlcsVoiceVLAN | 1.3.6.1.4.1.2356.14.2.2 | |||
| NlcsVoiceVLANConf | 1.3.6.1.4.1.2356.14.2.2.1 | |||
| SlcsVoiceVLANMode | 1.3.6.1.4.1.2356.14.2.2.1.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Voice VLAN mode operation. default: 0, 0: disable 1: enable | ||||
| SlcsVoiceVLANVLANId | 1.3.6.1.4.1.2356.14.2.2.1.2 | Integer32 (1..4094) | RW | |
scalar · Integer32 (1..4094) · read-write · current Voice VLAN ID. default: 1000, range : 1-4094. | ||||
| SlcsVoiceVLANAgingTime | 1.3.6.1.4.1.2356.14.2.2.1.3 | Integer32 (10..10000000) | RW | |
scalar · Integer32 (10..10000000) · read-write · current Voice VLAN secure learning aging time. default: 86400, range : 10 - 10000000. | ||||
| SlcsVoiceVLANTrafficClass | 1.3.6.1.4.1.2356.14.2.2.1.4 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current Voice VLAN traffic class, all traffic on the Voice VLAN will apply this class, available value is from 0(Low) to 7(High). default: 7. | ||||
| TlcsVoiceVLANPortTable | 1.3.6.1.4.1.2356.14.2.2.1.5 | NA | ||
table · not-accessible · current Show Voice Vlan configuration. | ||||
| RlcsVoiceVLANPortEntry | 1.3.6.1.4.1.2356.14.2.2.1.5.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsVoiceVLANPort | 1.3.6.1.4.1.2356.14.2.2.1.5.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port, range : 1 - port number. | ||||
| ClcsVoiceVLANPortMode | 1.3.6.1.4.1.2356.14.2.2.1.5.1.2 | Integer32 (0..2) | RW | |
column · Integer32 (0..2) · read-write · current Voice VLAN port mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members automatically.) 2: Forced (Force join to Voice VLAN.) | ||||
| ClcsVoiceVLANPortSecurity | 1.3.6.1.4.1.2356.14.2.2.1.5.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Voice VLAN port security mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: enable ( Enable Voice VLAN security mode. When the function is
enabled, all non-telephone MAC address in Voice VLAN
will be blocked 10 seconds.) | ||||
| ClcsVoiceVLANPortDiscoveryProtocol | 1.3.6.1.4.1.2356.14.2.2.1.5.1.4 | Integer32 (0..2) | RW | |
column · Integer32 (0..2) · read-write · current Voice VLAN port discovery protocol. default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI and LLDP.) | ||||
| NlcsVoiceVLANOUI | 1.3.6.1.4.1.2356.14.2.2.2 | |||
| SlcsVoiceVLANOUICreate | 1.3.6.1.4.1.2356.14.2.2.2.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current default: 0 0 : None (read only) 1 : Create an OUI entry | ||||
| TlcsVoiceVLANOUITable | 1.3.6.1.4.1.2356.14.2.2.2.2 | NA | ||
table · not-accessible · current Create Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI process. | ||||
| RlcsVoiceVLANOUIEntry | 1.3.6.1.4.1.2356.14.2.2.2.2.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsVoiceVLANOUIIndex | 1.3.6.1.4.1.2356.14.2.2.2.2.1.1 | Integer32 (1..16) | NA | |
| ClcsVoiceVLANTelephonyOUI | 1.3.6.1.4.1.2356.14.2.2.2.2.1.2 | DisplayString (SIZE (1..32)) | RC | |
column · DisplayString (SIZE (1..32)) · read-create · current OUI address, format : 0a 1b 2c | ||||
| ClcsVoiceVLANDescription | 1.3.6.1.4.1.2356.14.2.2.2.2.1.3 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current Up to 32 characters describing OUI address. | ||||
| ClcsVoiceVLANOUIRowStatus | 1.3.6.1.4.1.2356.14.2.2.2.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsGVRP | 1.3.6.1.4.1.2356.14.2.4 | |||
| NlcsGVRPConf | 1.3.6.1.4.1.2356.14.2.4.1 | |||
| SlcsGVRPMode | 1.3.6.1.4.1.2356.14.2.4.1.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current default: 0, 0: disable, 1: enable. | ||||
| SlcsGVRPMaxVlan | 1.3.6.1.4.1.2356.14.2.4.1.2 | Integer32 (1..4094) | RW | |
scalar · Integer32 (1..4094) · read-write · current Number of simultaniously VLANs that GVRP can control. | ||||
| SlcsGVRPJoinTime | 1.3.6.1.4.1.2356.14.2.4.1.3 | Integer32 (1..20) | RW | |
scalar · Integer32 (1..20) · read-write · current join-time in units of centi seconds. Range is 1-20. Default is 20. | ||||
| SlcsGVRPLeaveTime | 1.3.6.1.4.1.2356.14.2.4.1.4 | Integer32 (60..300) | RW | |
scalar · Integer32 (60..300) · read-write · current leave-time in units of centi seconds. Range is 60-300. Default is 60. | ||||
| SlcsGVRPLeaveAllTime | 1.3.6.1.4.1.2356.14.2.4.1.5 | Integer32 (1000..5000) | RW | |
scalar · Integer32 (1000..5000) · read-write · current leave-all-time in units of centi seconds Range is 1000-5000. Default is 1000 | ||||
| TlcsGVRPConfTable | 1.3.6.1.4.1.2356.14.2.4.1.6 | NA | ||
| RlcsGVRPConfEntry | 1.3.6.1.4.1.2356.14.2.4.1.6.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsGVRPConfPort | 1.3.6.1.4.1.2356.14.2.4.1.6.1.1 | Integer32 (1..4094) | NA | |
| ClcsGVRPConfPortMode | 1.3.6.1.4.1.2356.14.2.4.1.6.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current default: 0 1: enable 0: disable | ||||
| NlcsMirroring | 1.3.6.1.4.1.2356.14.2.6 | |||
| SlcsMonitorSession | 1.3.6.1.4.1.2356.14.2.6.1 | Integer32 (1..5) | RW | |
scalar · Integer32 (1..5) · read-write · current Monitor session. | ||||
| SlcsPortToMirrorOn | 1.3.6.1.4.1.2356.14.2.6.2 | Integer32 (0..4094) | RW | |
scalar · Integer32 (0..4094) · read-write · current default: 0 0: disable, range : 1 - port number. | ||||
| TlcsMirrorTable | 1.3.6.1.4.1.2356.14.2.6.3 | NA | ||
| RlcsMirrorEntry | 1.3.6.1.4.1.2356.14.2.6.3.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsMirrorPort | 1.3.6.1.4.1.2356.14.2.6.3.1.1 | Integer32 (1..4094) | NA | |
| ClcsMirrorMode | 1.3.6.1.4.1.2356.14.2.6.3.1.2 | Integer32 (0..3) | RW | |
column · Integer32 (0..3) · read-write · current default: 0 0: disable 1: rx only 2: tx only 3: enable Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored | ||||
| NlcsTrapEventSeverity | 1.3.6.1.4.1.2356.14.2.7 | |||
| TlcsTrapEventSeverityTable | 1.3.6.1.4.1.2356.14.2.7.1 | NA | ||
| RlcsTrapEventSeverityEntry | 1.3.6.1.4.1.2356.14.2.7.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsTrapEventSeverityIndex | 1.3.6.1.4.1.2356.14.2.7.1.1.1 | Integer32 (1..65535) | NA | |
| ClcsTrapEventSeverityGroupName | 1.3.6.1.4.1.2356.14.2.7.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Group Name | ||||
| ClcsTrapEventSeverityLevel | 1.3.6.1.4.1.2356.14.2.7.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Emergency 1:Alert 2:Critical 3:Error 4:Warning 5:Notice 6:Information 7:Debug | ||||
| ClcsTrapEventSeveritySyslog | 1.3.6.1.4.1.2356.14.2.7.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current 0:disable 1:enable | ||||
| ClcsTrapEventSeverityTrap | 1.3.6.1.4.1.2356.14.2.7.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current 0:disable 1:enable | ||||
| ClcsTrapEventSeveritySMTP | 1.3.6.1.4.1.2356.14.2.7.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current 0:disable 1:enable | ||||
| NlcsSMTP | 1.3.6.1.4.1.2356.14.2.8 | |||
| SlcsSMTPMailServer | 1.3.6.1.4.1.2356.14.2.8.1 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing email server. | ||||
| SlcsSMTPUserName | 1.3.6.1.4.1.2356.14.2.8.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing user name. | ||||
| SlcsSMTPPassword | 1.3.6.1.4.1.2356.14.2.8.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing password. | ||||
| SlcsSMTPSender | 1.3.6.1.4.1.2356.14.2.8.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing sender. | ||||
| SlcsSMTPReturnPath | 1.3.6.1.4.1.2356.14.2.8.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing return path. | ||||
| SlcsSMTPEmailAddress1 | 1.3.6.1.4.1.2356.14.2.8.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing mail address. | ||||
| SlcsSMTPEmailAddress2 | 1.3.6.1.4.1.2356.14.2.8.8 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing mail address. | ||||
| SlcsSMTPEmailAddress3 | 1.3.6.1.4.1.2356.14.2.8.9 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing mail address. | ||||
| SlcsSMTPEmailAddress4 | 1.3.6.1.4.1.2356.14.2.8.10 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing mail address. | ||||
| SlcsSMTPEmailAddress5 | 1.3.6.1.4.1.2356.14.2.8.11 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing mail address. | ||||
| SlcsSMTPEmailAddress6 | 1.3.6.1.4.1.2356.14.2.8.12 | DisplayString | RW | |
scalar · DisplayString · read-write · current Up to 47 characters describing mail address. | ||||
| NlcsACLConf | 1.3.6.1.4.1.2356.14.2.9 | |||
| NlcsACL | 1.3.6.1.4.1.2356.14.2.9.1 | |||
| TlcsACLPortConfTable | 1.3.6.1.4.1.2356.14.2.9.1.1 | NA | ||
table · not-accessible · current The ACL Port Conf Table. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsACLPortConfEntry | 1.3.6.1.4.1.2356.14.2.9.1.1.1 | NA | ||
| ClcsACLPortConfPolicyID | 1.3.6.1.4.1.2356.14.2.9.1.1.1.2 | Integer32 (0..127) | RW | |
column · Integer32 (0..127) · read-write · current The policy to apply to this port. default: 0, range : 0 - 127. | ||||
| ClcsACLPortConfAction | 1.3.6.1.4.1.2356.14.2.9.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Whether forwarding is permitted ('Permit') or denied ('Deny').
default: 1,
0: Deny,
1: Permit.
| ||||
| ClcsACLPortConfRateLimiterID | 1.3.6.1.4.1.2356.14.2.9.1.1.1.4 | Integer32 (0..16) | RW | |
column · Integer32 (0..16) · read-write · current The rate limiter to apply on this port. 0: Disable, range : 0 - 16. | ||||
| ClcsACLPortConfPortRedirect | 1.3.6.1.4.1.2356.14.2.9.1.1.1.5 | Integer32 (0..4094) | RW | |
column · Integer32 (0..4094) · read-write · current Port frames are redirected on. 0: Disable, range : 0 - end port number. | ||||
| ClcsACLPortConfMirror | 1.3.6.1.4.1.2356.14.2.9.1.1.1.6 | AdminMode | RW | |
column · AdminMode · read-write · current The mirror operation of this port. | ||||
| ClcsACLPortConfLogging | 1.3.6.1.4.1.2356.14.2.9.1.1.1.7 | AdminMode | RW | |
column · AdminMode · read-write · current Specify the logging operation of this port. | ||||
| ClcsACLPortConfShutdown | 1.3.6.1.4.1.2356.14.2.9.1.1.1.8 | AdminMode | RW | |
column · AdminMode · read-write · current Specify the port shut down operation of this port. | ||||
| ClcsACLPortConfState | 1.3.6.1.4.1.2356.14.2.9.1.1.1.9 | AdminMode | RW | |
column · AdminMode · read-write · current Specify the port state of this port. | ||||
| ClcsACLPortConfCounter | 1.3.6.1.4.1.2356.14.2.9.1.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Counts the number of frames that match this ACE. | ||||
| TlcsACLRateLimiterTable | 1.3.6.1.4.1.2356.14.2.9.1.2 | NA | ||
table · not-accessible · current The ACL Rate Limiter Table. | ||||
| RlcsACLRateLimiterEntry | 1.3.6.1.4.1.2356.14.2.9.1.2.1 | NA | ||
| ClcsACLRateLimiterID | 1.3.6.1.4.1.2356.14.2.9.1.2.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Rate Limiter ID. range : 1-16 | ||||
| ClcsACLRateLimiterRate | 1.3.6.1.4.1.2356.14.2.9.1.2.1.2 | Integer32 (0..500000) | RW | |
column · Integer32 (0..500000) · read-write · current default: 1, range : <0-500000> 10pps,The valid rate is 0, 10, 20, 30, ..., 5000000 in pps. <0-400000> 25kbps,The valid rate is 0, 25, 50, 75,..., 10000000 in kbps. | ||||
| ClcsACLRateLimiterUnit | 1.3.6.1.4.1.2356.14.2.9.1.2.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Specify the rate unit. 0: 10pps, 1: 25kbps. | ||||
| TlcsACLStatusTable | 1.3.6.1.4.1.2356.14.2.9.1.4 | NA | ||
table · not-accessible · current ACL ACE Status entry. | ||||
| RlcsACLStatusEntry | 1.3.6.1.4.1.2356.14.2.9.1.4.1 | NA | ||
| ClcsACLStatusIndex | 1.3.6.1.4.1.2356.14.2.9.1.4.1.1 | Integer32 (1..256) | NA | |
column · Integer32 (1..256) · not-accessible · current The ACL status index. | ||||
| ClcsACLStatusUser | 1.3.6.1.4.1.2356.14.2.9.1.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the ACL user. S : Static, IPMG : IP Management, IPSG : IP Source Guard, IPMC : IPMC, ARPI : Arp Inspection, UPnP : UPnP, DHCP : DHCP. | ||||
| ClcsACLStatusID | 1.3.6.1.4.1.2356.14.2.9.1.4.1.3 | Integer32 (1..256) | RO | |
column · Integer32 (1..256) · read-only · current ACE ID. range : 1 - 256. | ||||
| ClcsACLStatusIngressPort | 1.3.6.1.4.1.2356.14.2.9.1.4.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port. | ||||
| ClcsACLStatusFrameType | 1.3.6.1.4.1.2356.14.2.9.1.4.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the frame type of the ACE. Any: The ACE will match any frame type. EType: The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will not get matched by IP and ARP frames. ARP: The ACE will match ARP/RARP frames. IPv4: The ACE will match all IPv4 frames. IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol. IPv4/UDP: The ACE will match IPv4 frames with UDP protocol. IPv4/TCP: The ACE will match IPv4 frames with TCP protocol. IPv4/Other: The ACE will match IPv4 frames, which are not ICMP/UDP/TCP. IPv6: The ACE will match all IPv6 standard frames. | ||||
| ClcsACLStatusAction | 1.3.6.1.4.1.2356.14.2.9.1.4.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the forwarding action of the ACE. | ||||
| ClcsACLStatusRateLimiter | 1.3.6.1.4.1.2356.14.2.9.1.4.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the rate limiter number of the ACE. | ||||
| ClcsACLStatusPortRedirect | 1.3.6.1.4.1.2356.14.2.9.1.4.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. | ||||
| ClcsACLStatusMirror | 1.3.6.1.4.1.2356.14.2.9.1.4.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current Specify the mirror operation of this port. | ||||
| ClcsACLStatusCPU | 1.3.6.1.4.1.2356.14.2.9.1.4.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Forward packet that matched the specific ACE to CPU. | ||||
| ClcsACLStatusCPUOnce | 1.3.6.1.4.1.2356.14.2.9.1.4.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current Forward first packet that matched the specific ACE to CPU. | ||||
| ClcsACLStatusCounter | 1.3.6.1.4.1.2356.14.2.9.1.4.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The counter indicates the number of times the ACE was hit by a frame. | ||||
| ClcsACLStatusConflict | 1.3.6.1.4.1.2356.14.2.9.1.4.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. | ||||
| NlcsAclConformance | 1.3.6.1.4.1.2356.14.2.9.1.200 | |||
| NlcsAclCompliances | 1.3.6.1.4.1.2356.14.2.9.1.200.1 | |||
| NlcsAclGroups | 1.3.6.1.4.1.2356.14.2.9.1.200.2 | |||
| GlcsACLPortConfGroup | 1.3.6.1.4.1.2356.14.2.9.1.200.2.1 | |||
group · current The collection of objects which are used to indicate lcs ACL information. | ||||
| GlcsACLRateLimiterGroup | 1.3.6.1.4.1.2356.14.2.9.1.200.2.2 | |||
group · current The collection of objects which are used to indicate lcs ACL information. | ||||
| GlcsACLACEGroup | 1.3.6.1.4.1.2356.14.2.9.1.200.2.3 | |||
group · current The collection of objects which are used to indicate lcs ACL information.
| ||||
| GlcsACLStatusGroup | 1.3.6.1.4.1.2356.14.2.9.1.200.2.4 | |||
group · current The collection of objects which are used to indicate lcs ACL information. | ||||
| NlcsACLACE | 1.3.6.1.4.1.2356.14.2.9.3 | |||
| SlcsACLACEClear | 1.3.6.1.4.1.2356.14.2.9.3.1 | ActivateCmd | RW | |
scalar · ActivateCmd · read-write · current Clear all ACE counters. | ||||
| TlcsACLACETable | 1.3.6.1.4.1.2356.14.2.9.3.2 | NA | ||
table · not-accessible · current Create ACL ACE entry. | ||||
| RlcsACLACEEntry | 1.3.6.1.4.1.2356.14.2.9.3.2.1 | NA | ||
| ClcsACLACEIndex | 1.3.6.1.4.1.2356.14.2.9.3.2.1.1 | Integer32 (1..256) | NA | |
column · Integer32 (1..256) · not-accessible · current The index. | ||||
| ClcsACLACEID | 1.3.6.1.4.1.2356.14.2.9.3.2.1.2 | Integer32 (1..256) | RC | |
column · Integer32 (1..256) · read-create · current If the ACE ID is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256. | ||||
| ClcsACLACENextID | 1.3.6.1.4.1.2356.14.2.9.3.2.1.3 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range : 0 - 256. | ||||
| ClcsACLACEIngressPort | 1.3.6.1.4.1.2356.14.2.9.3.2.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current Indicates the ingress port of the ACE. Possible values are: 0: All,The ACE will match all ingress port. Port n: The ACE will match a specific ingress port. | ||||
| ClcsACLACEPortPolicyNumber | 1.3.6.1.4.1.2356.14.2.9.3.2.1.6 | Integer32 (0..127) | RC | |
column · Integer32 (0..127) · read-create · current policy value. range : 0 - 127. 0: Any. | ||||
| ClcsACLACEPortPolicyBitmask | 1.3.6.1.4.1.2356.14.2.9.3.2.1.7 | Integer32 (0..127) | RC | |
column · Integer32 (0..127) · read-create · current When 'Specific' is selected for the policy filter, you can enter a specific policy bitmask. range : 0 - 127, 0: no data. | ||||
| ClcsACLACEFrameType | 1.3.6.1.4.1.2356.14.2.9.3.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Select the frame type for this ACE. When change the type Related oid will set default. 0: any, 1: etype, 2: arp, 3: ipv4, 4: ipv6.
| ||||
| ClcsACLACEAction | 1.3.6.1.4.1.2356.14.2.9.3.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current 0: Deny 1: Permit 2: Filter
| ||||
| ClcsACLACEFilterPort | 1.3.6.1.4.1.2356.14.2.9.3.2.1.10 | DisplayString | RC | |
column · DisplayString · read-create · current When 'Action' is 'Filter' can set. 0: Disable, Port n: The ACE applies to this port number, where n is the number of the switch port. range: 0 - Port number. | ||||
| ClcsACLACEDenyPortRedirect | 1.3.6.1.4.1.2356.14.2.9.3.2.1.11 | DisplayString | RC | |
column · DisplayString · read-create · current Frames that hit the ACE are redirected to the port number specified here.Disabled,indicates that the port redirect operation is disabled. When 'Action' is 'Deny' can set. 0: disabled, Port no: The ACE applies to this port number, where n is the number of the switch port. | ||||
| ClcsACLACERateLimiter | 1.3.6.1.4.1.2356.14.2.9.3.2.1.12 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current default: 0, 0: Disable range : 0 - 16 | ||||
| ClcsACLACEMirror | 1.3.6.1.4.1.2356.14.2.9.3.2.1.13 | AdminMode | RC | |
column · AdminMode · read-create · current default: 0, 0: disable - Frames matching the ACE are not mirrored. 1: enable - Frames matching the ACE are mirrored. | ||||
| ClcsACLACELogging | 1.3.6.1.4.1.2356.14.2.9.3.2.1.14 | AdminMode | RC | |
column · AdminMode · read-create · current default: 0, 0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log. | ||||
| ClcsACLACEShutdown | 1.3.6.1.4.1.2356.14.2.9.3.2.1.15 | AdminMode | RC | |
column · AdminMode · read-create · current default: 0, 0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled. | ||||
| ClcsACLACECounter | 1.3.6.1.4.1.2356.14.2.9.3.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The counter indicates the number of times the ACE was hit by a frame. | ||||
| ClcsACLACEVLAN8021QTagged | 1.3.6.1.4.1.2356.14.2.9.3.2.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current Specify whether frames can hit the action according to the 802.1Q tagged. default: 2, 0: disable - Untagged frame only. 1: enable - Tagged frame only. 2: Any - Any value is allowed.
| ||||
| ClcsACLACEVLANVID | 1.3.6.1.4.1.2356.14.2.9.3.2.1.18 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current Specify the VLAN ID filter for this ACE. The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - 4094 | ||||
| ClcsACLACEVLANTagPriority | 1.3.6.1.4.1.2356.14.2.9.3.2.1.19 | Integer32 (0..14) | RC | |
column · Integer32 (0..14) · read-create · current Specify the tag priority for this ACE. The tag priority can't be set when 802.1Q Tagged is disabled. range: 0-14 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 8:0-1 9:2-3 10:4-5 11:6-7 12:0-3 13:4-7 14:Any | ||||
| ClcsACLACESMAC | 1.3.6.1.4.1.2356.14.2.9.3.2.1.20 | DisplayString | RC | |
column · DisplayString · read-create · current Configure source MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this source MAC address value. xx-xx-xx-xx-xx-xx. Any: Don't care. | ||||
| ClcsACLACEDMACType | 1.3.6.1.4.1.2356.14.2.9.3.2.1.21 | INTEGER | RC | |
column · INTEGER · read-create · current DMAC Type. default: 0, 0: Any - Don't care. 1: Multicast - Frame must be multicast. 2: Broadcast - Frame must be broadcast. 3: Unicast - Frame must be unicast. 4: mac address. 5: no data.
| ||||
| ClcsACLACEDMAC | 1.3.6.1.4.1.2356.14.2.9.3.2.1.22 | DisplayString | RC | |
column · DisplayString · read-create · current Configure destination MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this destination MAC address value. xx-xx-xx-xx-xx-xx. | ||||
| ClcsACLACEEtherType | 1.3.6.1.4.1.2356.14.2.9.3.2.1.23 | Integer32 (-1..65535) | RC | |
column · Integer32 (-1..65535) · read-create · current 0: Any range : 0, or 1536(0x0600) - 65535(0xffff) but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). -1: No data. | ||||
| ClcsACLACEArpOpCode | 1.3.6.1.4.1.2356.14.2.9.3.2.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current Configure ARP opcode for this ACE. default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data.
| ||||
| ClcsACLACEArpFlagsRequestReply | 1.3.6.1.4.1.2356.14.2.9.3.2.1.25 | INTEGER | RC | |
column · INTEGER · read-create · current Specify the available ARP/RARP opcode (OP) flag for this ACE. default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or RARP Request OP flag set. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACEArpFlagsArpSMac | 1.3.6.1.4.1.2356.14.2.9.3.2.1.26 | INTEGER | RC | |
column · INTEGER · read-create · current Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to the SMAC address. 1: ARP frames where SHA is equal to the SMAC address. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACEArpFlagsRarpDmac | 1.3.6.1.4.1.2356.14.2.9.3.2.1.27 | INTEGER | RC | |
column · INTEGER · read-create · current Specify whether frames can hit the action according to their target hardware address field (THA) settings. default: 2, 0: RARP frames where THA is not equal to the DMAC address. 1: RARP frames where THA is equal to the DMAC address. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACEArpFlagsLength | 1.3.6.1.4.1.2356.14.2.9.3.2.1.28 | INTEGER | RC | |
column · INTEGER · read-create · current Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. default: 2, 0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04). 1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4(0x04). 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACEArpFlagsIp | 1.3.6.1.4.1.2356.14.2.9.3.2.1.29 | INTEGER | RC | |
column · INTEGER · read-create · current Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. default: 2, 0: ARP/RARP frames where the HLD is not equal to Ethernet(1). 1: ARP/RARP frames where the HLD is equal to Ethernet(1). 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACEArpFlagsEthernet | 1.3.6.1.4.1.2356.14.2.9.3.2.1.30 | INTEGER | RC | |
column · INTEGER · read-create · current Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. default: 2, 0: ARP/RARP frames where the PRO is not equal to IP\n(0x800). 1: ARP/RARP frames where the PRO is equal to IP(0x800). 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACESIPType | 1.3.6.1.4.1.2356.14.2.9.3.2.1.31 | INTEGER | RC | |
column · INTEGER · read-create · current Configure source IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: Network. 3: No data.
| ||||
| ClcsACLACESIPIPAddress | 1.3.6.1.4.1.2356.14.2.9.3.2.1.32 | IpAddress | RC | |
column · IpAddress · read-create · current A frame that hits this ACE matches this source IP address value. | ||||
| ClcsACLACESIPIPMask | 1.3.6.1.4.1.2356.14.2.9.3.2.1.33 | IpAddress | RC | |
column · IpAddress · read-create · current Specific sender IP mask in dotted decimal notation. | ||||
| ClcsACLACEDIPType | 1.3.6.1.4.1.2356.14.2.9.3.2.1.34 | INTEGER | RC | |
column · INTEGER · read-create · current Configure destination IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: Network. 3: No data.
| ||||
| ClcsACLACEDIPIPAddress | 1.3.6.1.4.1.2356.14.2.9.3.2.1.35 | IpAddress | RC | |
column · IpAddress · read-create · current A frame that hits this ACE matches this destination IP address value. | ||||
| ClcsACLACEDIPIPMask | 1.3.6.1.4.1.2356.14.2.9.3.2.1.36 | IpAddress | RC | |
column · IpAddress · read-create · current Specific sender IP mask in dotted decimal notation. | ||||
| ClcsACLACEIPProtocol | 1.3.6.1.4.1.2356.14.2.9.3.2.1.37 | INTEGER | RC | |
column · INTEGER · read-create · current Specify the IP protocol filter for this ACE. default: 0, 0: Any, 1: ICMP, 2: UDP, 3: TCP, 4: Other, 5: no data.
| ||||
| ClcsACLACEIPProtocolValue | 1.3.6.1.4.1.2356.14.2.9.3.2.1.38 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current Configure IP protocol value for this ACE when IP Protocol is 'other'. default: 256, 256: No data. range : 0 - 256 | ||||
| ClcsACLACEIPFlagsTTL | 1.3.6.1.4.1.2356.14.2.9.3.2.1.39 | INTEGER | RC | |
column · INTEGER · read-create · current Specify the Time-to-Live settings for this ACE. default: 0, 0: zero, 1: Non-Zero 2: Any,, 3: No data.
| ||||
| ClcsACLACEIPFlagsFragment | 1.3.6.1.4.1.2356.14.2.9.3.2.1.40 | INTEGER | RC | |
column · INTEGER · read-create · current Specify the fragment offset settings for this ACE. default: 2, 0: No, 1: Yes, 2: Any, 3: No data.
| ||||
| ClcsACLACEIPFlagsOptions | 1.3.6.1.4.1.2356.14.2.9.3.2.1.41 | INTEGER | RC | |
column · INTEGER · read-create · current Specify the options flag setting for this ACE. default: 2, 0: No, 1: Yes, 2: Any, 3: No data.
| ||||
| ClcsACLACEICMPType | 1.3.6.1.4.1.2356.14.2.9.3.2.1.42 | Integer32 (0..257) | RC | |
column · Integer32 (0..257) · read-create · current Configure ICMP type for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257. | ||||
| ClcsACLACEICMPCode | 1.3.6.1.4.1.2356.14.2.9.3.2.1.43 | Integer32 (0..257) | RC | |
column · Integer32 (0..257) · read-create · current Configure ICMP code for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257. | ||||
| ClcsACLACESourcePort | 1.3.6.1.4.1.2356.14.2.9.3.2.1.44 | DisplayString | RC | |
column · DisplayString · read-create · current Configure Source UDP/TCP port range for this ACE. default: any, specific: 0~65535, range : 0 - 65535. | ||||
| ClcsACLACEDestPort | 1.3.6.1.4.1.2356.14.2.9.3.2.1.45 | DisplayString | RC | |
column · DisplayString · read-create · current Configure Destination UDP/TCP port range for this ACE. default: any, specific: 0~65535, range : 0 - 65535. | ||||
| ClcsACLACETCPFlagsFin | 1.3.6.1.4.1.2356.14.2.9.3.2.1.46 | INTEGER | RC | |
column · INTEGER · read-create · current Configure TCP (FIN) flags for this ACE. default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACETCPFlagsSyn | 1.3.6.1.4.1.2356.14.2.9.3.2.1.47 | INTEGER | RC | |
column · INTEGER · read-create · current Configure TCP (SYN) flags for this ACE. default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACETCPFlagsRst | 1.3.6.1.4.1.2356.14.2.9.3.2.1.48 | INTEGER | RC | |
column · INTEGER · read-create · current Configure TCP (RST) flags for this ACE. default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACETCPFlagsPsh | 1.3.6.1.4.1.2356.14.2.9.3.2.1.49 | INTEGER | RC | |
column · INTEGER · read-create · current Configure TCP (PSH) flags for this ACE. default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACETCPFlagsAck | 1.3.6.1.4.1.2356.14.2.9.3.2.1.50 | INTEGER | RC | |
column · INTEGER · read-create · current Configure TCP (ACK) flags for this ACE. default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACETCPFlagsUrg | 1.3.6.1.4.1.2356.14.2.9.3.2.1.51 | INTEGER | RC | |
column · INTEGER · read-create · current Configure TCP (URG) flags for this ACE. default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. 3: No data.
| ||||
| ClcsACLACEIPv6SIPAddress | 1.3.6.1.4.1.2356.14.2.9.3.2.1.52 | DisplayString | RC | |
column · DisplayString · read-create · current When 'Specific' is selected for the source IPv6 filter, you can enter a specific SIPv6 address. The field only supported last 32 bits for IPv6 address. | ||||
| ClcsACLACEIPv6SIPBitmask | 1.3.6.1.4.1.2356.14.2.9.3.2.1.53 | DisplayString | RC | |
column · DisplayString · read-create · current When 'Specific' is selected for the source IPv6 filter, you can enter a specific SIPv6 mask. The field only supported last 32 bits for IPv6 address. | ||||
| ClcsACLACEIPv6HopLimit | 1.3.6.1.4.1.2356.14.2.9.3.2.1.54 | INTEGER | RC | |
column · INTEGER · read-create · current Specify the hop limit settings for this ACE. default: 2, 0: Where the Hop Limit field is unset. 1: Where the Hop Limit field is set. 2: Any - Don't care, 3: No data.
| ||||
| ClcsACLACESMACMask | 1.3.6.1.4.1.2356.14.2.9.3.2.1.56 | DisplayString | RC | |
column · DisplayString · read-create · current Configure source MAC address mask for this ACE. <mac-address>: A frame that hits this ACE matches this source MAC address value. xx-xx-xx-xx-xx-xx. | ||||
| ClcsACLACEDMACMask | 1.3.6.1.4.1.2356.14.2.9.3.2.1.57 | DisplayString | RC | |
column · DisplayString · read-create · current Configure destination MAC address mask for this ACE. <mac-address>: A frame that hits this ACE matches this destination MAC address value. xx-xx-xx-xx-xx-xx. | ||||
| ClcsACLACERowStatus | 1.3.6.1.4.1.2356.14.2.9.3.2.1.58 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsQosConf | 1.3.6.1.4.1.2356.14.2.10 | |||
| NlcsQos | 1.3.6.1.4.1.2356.14.2.10.1 | |||
| NlcsQosPortClassification | 1.3.6.1.4.1.2356.14.2.10.1.1 | |||
| TlcsQosPortClassificationTable | 1.3.6.1.4.1.2356.14.2.10.1.1.1 | NA | ||
table · not-accessible · current QoS Ingress Port Classification. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosPortClassificationEntry | 1.3.6.1.4.1.2356.14.2.10.1.1.1.1 | NA | ||
| ClcsQosPortClassificationQoSClass | 1.3.6.1.4.1.2356.14.2.10.1.1.1.1.2 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current Controls the default QoS class, i.e., the QoS class for frames not classified in any way. There is a one to one mapping between QoS class, queue and priority. A QoS class of 0 (zero) has the lowest priority. NOTe: If the QoS class has been dynamically changed, then the actual QoS class is shown in parentheses after the configured QoS class. range: 0~7, default: 0. | ||||
| ClcsQosPortClassificationDPlevel | 1.3.6.1.4.1.2356.14.2.10.1.1.1.1.3 | Integer32 (0..3) | RW | |
column · Integer32 (0..3) · read-write · current DP level for frames not classified in any way. range: 0~3, default: 0. | ||||
| ClcsQosPortClassificationPCP | 1.3.6.1.4.1.2356.14.2.10.1.1.1.1.4 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame. range: 0~7, default: 0. | ||||
| ClcsQosPortClassificationDEI | 1.3.6.1.4.1.2356.14.2.10.1.1.1.1.5 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Drop Eligible Indicator. It is a 1-bit field in the VLAN. range 0~1, default: 0. | ||||
| ClcsQosPortClassificationPCPClassification | 1.3.6.1.4.1.2356.14.2.10.1.1.1.1.6 | AdminMode | RW | |
column · AdminMode · read-write · current Configure the classification mode for tagged frames. | ||||
| ClcsQosPortClassificationDSCPBased | 1.3.6.1.4.1.2356.14.2.10.1.1.1.1.7 | AdminMode | RW | |
column · AdminMode · read-write · current Click to Enable DSCP Based QoS Ingress Port Classification. | ||||
| ClcsQosPortClassificationWredGroup | 1.3.6.1.4.1.2356.14.2.10.1.1.1.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the WRED group membership. Range:1-3. | ||||
| TlcsQoSIngressPortTagClassificationTable | 1.3.6.1.4.1.2356.14.2.10.1.1.2 | NA | ||
table · not-accessible · current Show QoS Ingress Port Tag Classification. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQoSIngressPortTagClassificationEntry | 1.3.6.1.4.1.2356.14.2.10.1.1.2.1 | NA | ||
row · not-accessible · current QoS Ingress Port Tag Classification entry. | ||||
| ClcsQoSIngressPortTagPCP | 1.3.6.1.4.1.2356.14.2.10.1.1.2.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current range: 1-8, PCP0:1, PCP1:2...
| ||||
| ClcsQoSIngressPortTagDEI | 1.3.6.1.4.1.2356.14.2.10.1.1.2.1.3 | INTEGER | NA | |
column · INTEGER · not-accessible · current Ingress Port Tag dei, DEI0:1, DEI1:2.
| ||||
| ClcsQoSIngressPortTagQosClass | 1.3.6.1.4.1.2356.14.2.10.1.1.2.1.4 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current range: 0-7. | ||||
| ClcsQoSIngressPortTagDPLevel | 1.3.6.1.4.1.2356.14.2.10.1.1.2.1.5 | Integer32 (0..3) | RW | |
column · Integer32 (0..3) · read-write · current range: 0-3. | ||||
| NlcsQosPortPolicing | 1.3.6.1.4.1.2356.14.2.10.1.2 | |||
| TlcsQosPortPolicingTable | 1.3.6.1.4.1.2356.14.2.10.1.2.1 | NA | ||
table · not-accessible · current The Policer settings. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosPortPolicingEntry | 1.3.6.1.4.1.2356.14.2.10.1.2.1.1 | NA | ||
| ClcsQosPortPolicingEnabled | 1.3.6.1.4.1.2356.14.2.10.1.2.1.1.2 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the policer is enabled on this switch port. | ||||
| ClcsQosPortPolicingRate | 1.3.6.1.4.1.2356.14.2.10.1.2.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the rate for the policer. default: 500(kbps). | ||||
| ClcsQosPortPolicingUnit | 1.3.6.1.4.1.2356.14.2.10.1.2.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the unit of measure for the policer rate. 0: kbps 1: Mbps 2: fps 3: kfps | ||||
| ClcsQosPortPolicingFlowControl | 1.3.6.1.4.1.2356.14.2.10.1.2.1.1.5 | AdminMode | RW | |
column · AdminMode · read-write · current If flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding frames. | ||||
| NlcsQosEgressPortPCPRemarking | 1.3.6.1.4.1.2356.14.2.10.1.6 | |||
| TlcsQosEgressPortPCPRemarkingTable | 1.3.6.1.4.1.2356.14.2.10.1.6.1 | NA | ||
table · not-accessible · current The basic Qos Egress Port PCP Remarking Configuration settings. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosEgressPortPCPRemarkingEntry | 1.3.6.1.4.1.2356.14.2.10.1.6.1.1 | NA | ||
| ClcsQosEgressPortPCPRemarkingMode | 1.3.6.1.4.1.2356.14.2.10.1.6.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current the tag remarking mode for this port. 0:Keep, Use classified PCP/DEI values. 1:Specific, Use default PCP/DEI values. 2:Mapped, Use mapped versions of QoS class and DP level.
| ||||
| TlcsQosEgressPortPCPRemarkingSpecificTable | 1.3.6.1.4.1.2356.14.2.10.1.6.2 | NA | ||
table · not-accessible · current The basic Qos Egress Port PCP Remarking Specific Configuration settings. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosEgressPortPCPRemarkingSpecificEntry | 1.3.6.1.4.1.2356.14.2.10.1.6.2.1 | NA | ||
| ClcsQosEgressPortPCPRemarkingSpecificPCP | 1.3.6.1.4.1.2356.14.2.10.1.6.2.1.2 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current Controls the specific PCP Range : 0-7 | ||||
| ClcsQosEgressPortPCPRemarkingSpecificDEI | 1.3.6.1.4.1.2356.14.2.10.1.6.2.1.3 | AdminMode | RW | |
column · AdminMode · read-write · current controls the admin state of DEI | ||||
| TlcsQosEgressPortPCPRemarkingMappedTable | 1.3.6.1.4.1.2356.14.2.10.1.6.4 | NA | ||
table · not-accessible · current Show Qos Egress Port PCP Remarking Mapped. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosEgressPortPCPRemarkingMappedEntry | 1.3.6.1.4.1.2356.14.2.10.1.6.4.1 | NA | ||
row · not-accessible · current The Qos Egress Port PCP Remarking Mapped Entry. | ||||
| ClcsQosEgressPortPCPRemarkingMappedQueuePriority | 1.3.6.1.4.1.2356.14.2.10.1.6.4.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current range: 1-8, QoS Class0: 1, QoS Class1: 2...
| ||||
| ClcsQosEgressPortPCPRemarkingMappedDPLevel | 1.3.6.1.4.1.2356.14.2.10.1.6.4.1.3 | INTEGER | NA | |
column · INTEGER · not-accessible · current range: 1-2, DP Level0: 1, DP Level1: 2.
| ||||
| ClcsQosEgressPortPCPRemarkingMappedPCP | 1.3.6.1.4.1.2356.14.2.10.1.6.4.1.4 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current range: 0-7. | ||||
| ClcsQosEgressPortPCPRemarkingMappedDEI | 1.3.6.1.4.1.2356.14.2.10.1.6.4.1.5 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current range: 0-1. | ||||
| NlcsQosPortDSCP | 1.3.6.1.4.1.2356.14.2.10.1.7 | |||
| TlcsQosPortDSCPTable | 1.3.6.1.4.1.2356.14.2.10.1.7.1 | NA | ||
table · not-accessible · current The basic QoS Port DSCP Configuration settings. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosPortDSCPEntry | 1.3.6.1.4.1.2356.14.2.10.1.7.1.1 | NA | ||
| ClcsQosPortDSCPIngressTranslate | 1.3.6.1.4.1.2356.14.2.10.1.7.1.1.2 | AdminMode | RW | |
column · AdminMode · read-write · current Configure DSCP ingress translation mode. | ||||
| ClcsQosPortDSCPIngressClassify | 1.3.6.1.4.1.2356.14.2.10.1.7.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Classification for a port have 4 different values. 0: disable, 1: DSCP=0, 2: Selected, 3: All.
| ||||
| ClcsQosPortDSCPEgressRewrite | 1.3.6.1.4.1.2356.14.2.10.1.7.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Configure the port egress rewriting mode. 0: Disable,1: Enable,2: Remap,range: 0-2
| ||||
| NlcsQosDSCPBasedQoS | 1.3.6.1.4.1.2356.14.2.10.1.8 | |||
| TlcsQosDSCPBasedQoSTable | 1.3.6.1.4.1.2356.14.2.10.1.8.1 | NA | ||
table · not-accessible · current configure the basic Qos DSCP-Based QoS Ingress Classification settings for all switches. | ||||
| RlcsQosDSCPBasedQoSEntry | 1.3.6.1.4.1.2356.14.2.10.1.8.1.1 | NA | ||
| ClcsQosDSCPBasedQoSList | 1.3.6.1.4.1.2356.14.2.10.1.8.1.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current DSCP mapping table index(1-64). | ||||
| ClcsQosDSCPBasedQoSDSCP | 1.3.6.1.4.1.2356.14.2.10.1.8.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Maximum number of supported DSCP values are 64. | ||||
| ClcsQosDSCPBasedQoSTrust | 1.3.6.1.4.1.2356.14.2.10.1.8.1.1.3 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are mapped to a specific QoS class and Drop Precedence Level. Frames with untrusted DSCP values are treated as a non-IP frame. | ||||
| ClcsQosDSCPBasedQoSQueuePriority | 1.3.6.1.4.1.2356.14.2.10.1.8.1.1.4 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current QoS class. range: 0-7, default: 0. | ||||
| ClcsQosDSCPBasedQoSDPL | 1.3.6.1.4.1.2356.14.2.10.1.8.1.1.5 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Drop Precedence Level. range: 0-1, default: 0. | ||||
| NlcsQosDSCPTranslation | 1.3.6.1.4.1.2356.14.2.10.1.9 | |||
| TlcsQosDSCPTranslationTable | 1.3.6.1.4.1.2356.14.2.10.1.9.1 | NA | ||
table · not-accessible · current The basic QoS DSCP Translation settings for all switches. | ||||
| RlcsQosDSCPTranslationEntry | 1.3.6.1.4.1.2356.14.2.10.1.9.1.1 | NA | ||
| ClcsQosDSCPTranslationList | 1.3.6.1.4.1.2356.14.2.10.1.9.1.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current DSCP translation table index(1-64). | ||||
| ClcsQosDSCPTranslationDSCPBasedId | 1.3.6.1.4.1.2356.14.2.10.1.9.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Configure global ingress DSCP translation table. | ||||
| ClcsQosDSCPTranslationIngressTranslate | 1.3.6.1.4.1.2356.14.2.10.1.9.1.1.3 | Integer32 (0..63) | RW | |
column · Integer32 (0..63) · read-write · current DSCP at Ingress side can be translated to any of DSCP values. range: 0-63, default: 0. | ||||
| ClcsQosDSCPTranslationIngressClassify | 1.3.6.1.4.1.2356.14.2.10.1.9.1.1.4 | AdminMode | RW | |
column · AdminMode · read-write · current Configure DSCP ingress classification. | ||||
| ClcsQosDSCPTranslationEgressRemap | 1.3.6.1.4.1.2356.14.2.10.1.9.1.1.5 | Integer32 (0..63) | RW | |
column · Integer32 (0..63) · read-write · current Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0. | ||||
| NlcsQosDSCPClassification | 1.3.6.1.4.1.2356.14.2.10.1.10 | |||
| TlcsQosDSCPClassificationTable | 1.3.6.1.4.1.2356.14.2.10.1.10.1 | NA | ||
table · not-accessible · current The mapping of QoS class to DSCP value. | ||||
| RlcsQosDSCPClassificationEntry | 1.3.6.1.4.1.2356.14.2.10.1.10.1.1 | NA | ||
row · not-accessible · current The Qos DSCP Classification Entry. | ||||
| ClcsQosDSCPClassificationQoSClass | 1.3.6.1.4.1.2356.14.2.10.1.10.1.1.1 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current This page allows you to configure the mapping of QoS class and Drop Precedence Level to DSCP value. range: 1-8} | ||||
| ClcsQosDSCPClassificationDSCPDP0 | 1.3.6.1.4.1.2356.14.2.10.1.10.1.1.2 | Integer32 (0..63) | RW | |
column · Integer32 (0..63) · read-write · current Select the classified DSCP value. range: 0-63, default: 0. | ||||
| ClcsQosDSCPClassificationDSCPDP1 | 1.3.6.1.4.1.2356.14.2.10.1.10.1.1.3 | Integer32 (0..63) | RW | |
column · Integer32 (0..63) · read-write · current Select the classified DSCP value. range: 0-63, default: 0. | ||||
| ClcsQosDSCPClassificationDSCPDP2 | 1.3.6.1.4.1.2356.14.2.10.1.10.1.1.4 | Integer32 (0..63) | RW | |
column · Integer32 (0..63) · read-write · current Select the classified DSCP value. range: 0-63, default: 0. | ||||
| ClcsQosDSCPClassificationDSCPDP3 | 1.3.6.1.4.1.2356.14.2.10.1.10.1.1.5 | Integer32 (0..63) | RW | |
column · Integer32 (0..63) · read-write · current Select the classified DSCP value. range: 0-63, default: 0. | ||||
| NlcsQosControlList | 1.3.6.1.4.1.2356.14.2.10.1.11 | |||
| TlcsQosQceTable | 1.3.6.1.4.1.2356.14.2.10.1.11.1 | NA | ||
table · not-accessible · current Create Qos QCE entry. | ||||
| RlcsQosQceEntry | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1 | NA | ||
| ClcsQosQceIndex | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.1 | Integer32 (1..256) | NA | |
column · Integer32 (1..256) · not-accessible · current the index to this table. | ||||
| ClcsQosQceID | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.2 | Integer32 (1..256) | RO | |
column · Integer32 (1..256) · read-only · current If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256. | ||||
| ClcsQosQceList | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.3 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current If the QCE List is non zero, the QCE will be placed in the list. If the QCE List is zero, the QCE will be placed last in the list. range : 0 - 256. | ||||
| ClcsQosQcePortMembers | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6. | ||||
| ClcsQosQceTag | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.6 | DisplayString | RC | |
column · DisplayString · read-create · current 'Any', 'Untagged' or 'Tagged' or 'C-Tag' or 'S-Tag' | ||||
| ClcsQosQceVID | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.7 | DisplayString | RC | |
column · DisplayString · read-create · current Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'. | ||||
| ClcsQosPCP | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.8 | DisplayString | RC | |
column · DisplayString · read-create · current Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. | ||||
| ClcsQosDEI | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.9 | DisplayString | RC | |
column · DisplayString · read-create · current Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'. | ||||
| ClcsQosSMAC | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.10 | DisplayString | RC | |
column · DisplayString · read-create · current Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'. | ||||
| ClcsQosDMACType | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.11 | DisplayString | RC | |
column · DisplayString · read-create · current Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast), 'SP'(Specific) or 'Any'. | ||||
| ClcsQosDMACValue | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.12 | DisplayString | RC | |
column · DisplayString · read-create · current when QosDMACType is 'SP'(specific) can set mac address. | ||||
| ClcsQosQceInnerTag | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.13 | DisplayString | RC | |
column · DisplayString · read-create · current Value of Inner Tag field can be 'Any', 'Untagged' or 'Tagged' or 'C-tagged' or 'S-tagged'. | ||||
| ClcsQosQceInnerVID | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.14 | DisplayString | RC | |
column · DisplayString · read-create · current Valid value of Inner VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'. | ||||
| ClcsQosInnerPCP | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.15 | DisplayString | RC | |
column · DisplayString · read-create · current Valid value Inner PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. | ||||
| ClcsQosInnerDEI | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.16 | DisplayString | RC | |
column · DisplayString · read-create · current Valid value of Inner DEI can be any of values between 0, 1 or 'Any'. | ||||
| ClcsQosFrameType | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6.
| ||||
| ClcsQosMacEtherType | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.18 | DisplayString | RC | |
column · DisplayString · read-create · current Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any. | ||||
| ClcsQosLLCSSAPAddr | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.19 | DisplayString | RC | |
column · DisplayString · read-create · current Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. | ||||
| ClcsQosLLCDSAPAddr | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.20 | DisplayString | RC | |
column · DisplayString · read-create · current Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. | ||||
| ClcsQosLLCControl | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.21 | DisplayString | RC | |
column · DisplayString · read-create · current Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. | ||||
| ClcsQosSNAPPID | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.22 | DisplayString | RC | |
column · DisplayString · read-create · current Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any. | ||||
| ClcsQosIpv4Protocol | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.23 | DisplayString | RC | |
column · DisplayString · read-create · current IP protocol number: (Other, TCP or UDP) or 'Any'. | ||||
| ClcsQosIpv4ProtocolValue | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.24 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current Ipv4 Protocol is Other. range: 0-255 default: 0. | ||||
| ClcsQosIpv4ProtocolUDPSPort | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.25 | DisplayString | RC | |
column · DisplayString · read-create · current Source TCP/UDP Port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. | ||||
| ClcsQosIpv4ProtocolUDPDPort | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.26 | DisplayString | RC | |
column · DisplayString · read-create · current Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. | ||||
| ClcsQosIpv4ProtocolTCPSPort | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.27 | DisplayString | RC | |
column · DisplayString · read-create · current Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. | ||||
| ClcsQosIpv4ProtocolTCPDPort | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.28 | DisplayString | RC | |
column · DisplayString · read-create · current Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. | ||||
| ClcsQosIpv4SourceIp | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.29 | DisplayString | RC | |
column · DisplayString · read-create · current Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223. | ||||
| ClcsQosIpv4SourceMask | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.30 | DisplayString | RC | |
column · DisplayString · read-create · current Specific Source IP address in mask format or value 0.0.0.0 is 'Any'. | ||||
| ClcsQosIpv4DestIp | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.31 | DisplayString | RC | |
column · DisplayString · read-create · current Specific Destination IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223. | ||||
| ClcsQosIpv4DestMask | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.32 | DisplayString | RC | |
column · DisplayString · read-create · current Specific Destination IP address in mask format or value 0.0.0.0 is 'Any'. | ||||
| ClcsQosIpv4IPFragment | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.33 | INTEGER | RC | |
column · INTEGER · read-create · current IPv4 frame fragmented option: 2: yes, 1: no, 0: any.
| ||||
| ClcsQosIpv4DSCP | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.34 | DisplayString | RC | |
column · DisplayString · read-create · current Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63. | ||||
| ClcsQosIpv6Protocol | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.35 | DisplayString | RC | |
column · DisplayString · read-create · current IP protocol number: (Other, TCP or UDP) or 'Any'. | ||||
| ClcsQosIpv6ProtocolValue | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.36 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current when IPv6 protocol is Other , range: 0-255. | ||||
| ClcsQosIpv6ProtocolUDPSPort | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.37 | DisplayString | RC | |
column · DisplayString · read-create · current Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. | ||||
| ClcsQosIpv6ProtocolUDPDPort | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.38 | DisplayString | RC | |
column · DisplayString · read-create · current Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. | ||||
| ClcsQosIpv6ProtocolTCPSPort | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.39 | DisplayString | RC | |
column · DisplayString · read-create · current Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. | ||||
| ClcsQosIpv6ProtocolTCPDPort | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.40 | DisplayString | RC | |
column · DisplayString · read-create · current Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. | ||||
| ClcsQosIpv6SourceIp | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.41 | DisplayString | RC | |
column · DisplayString · read-create · current IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. | ||||
| ClcsQosIpv6SourceMask | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.42 | DisplayString | RC | |
column · DisplayString · read-create · current IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. | ||||
| ClcsQosIpv6DestIp | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.43 | DisplayString | RC | |
column · DisplayString · read-create · current IPv6 destination address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. | ||||
| ClcsQosIpv6DestMask | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.44 | DisplayString | RC | |
column · DisplayString · read-create · current IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. | ||||
| ClcsQosIpv6DSCP | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.45 | DisplayString | RC | |
column · DisplayString · read-create · current Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. | ||||
| ClcsQosActionQueuePriority | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.46 | Integer32 (0..8) | RC | |
column · Integer32 (0..8) · read-create · current QoS class: (0-7) or 8: Default. | ||||
| ClcsQosActionDPL | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.47 | Integer32 (0..4) | RC | |
column · Integer32 (0..4) · read-create · current range:0-4. 4: Default | ||||
| ClcsQosActionDSCP | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.48 | Integer32 (0..64) | RC | |
column · Integer32 (0..64) · read-create · current Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default. | ||||
| ClcsQosActionPCP | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.49 | Integer32 (0..8) | RC | |
column · Integer32 (0..8) · read-create · current pcp: (0-7) or 8: Default. | ||||
| ClcsQosActionDEI | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.50 | Integer32 (0..2) | RC | |
column · Integer32 (0..2) · read-create · current dei: (0-1) or 2: Default. | ||||
| ClcsQosActionPolicy | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.51 | Integer32 (0..128) | RC | |
column · Integer32 (0..128) · read-create · current ACL Policy number: (0-127) or 'empty'(128). Default: empty. | ||||
| ClcsQosActionIngressMapID | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.52 | Integer32 (-1..255) | RC | |
column · Integer32 (-1..255) · read-create · current Classify Ingress Map ID: Range: 0-255 Default: -1 | ||||
| ClcsQosQceRowStatus | 1.3.6.1.4.1.2356.14.2.10.1.11.1.1.53 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsQosStormControl | 1.3.6.1.4.1.2356.14.2.10.1.12 | |||
| TlcsQosStormControlTable | 1.3.6.1.4.1.2356.14.2.10.1.12.1 | NA | ||
table · not-accessible · current The basic QoS DSCP Translation settings for all switches. | ||||
| RlcsQosStormControlEntry | 1.3.6.1.4.1.2356.14.2.10.1.12.1.1 | NA | ||
| ClcsQosStormControlFrameType | 1.3.6.1.4.1.2356.14.2.10.1.12.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The settings in a particular row apply to the frame type listed here. 1:Unicast, 2:Multicast, 3:Broadcast.
| ||||
| ClcsQosStormControlEnabled | 1.3.6.1.4.1.2356.14.2.10.1.12.1.1.2 | AdminMode | RW | |
column · AdminMode · read-write · current Enable or disable the global storm policer for the given frame type. | ||||
| ClcsQosStormControlRate | 1.3.6.1.4.1.2356.14.2.10.1.12.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the rate for the global storm policer. | ||||
| ClcsQosStormControlUnit | 1.3.6.1.4.1.2356.14.2.10.1.12.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the unit of measure for the global storm policer rate as fps or kfps.
0: kbps
1: Mbps
2: fps
3: kfps | ||||
| NlcsQosPortStormControl | 1.3.6.1.4.1.2356.14.2.10.1.13 | |||
| TlcsQosPortStormControlTable | 1.3.6.1.4.1.2356.14.2.10.1.13.1 | NA | ||
table · not-accessible · current Configure the storm control settings. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosPortStormControlEntry | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1 | NA | ||
| ClcsQosPortStormControlUnicastEnabled | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.2 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the storm control is enabled on this switch port. | ||||
| ClcsQosPortStormControlUnicastRate | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the rate for the storm control. | ||||
| ClcsQosPortStormControlUnicastUnit | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the unit of measure for the storm control rate. 0: kbps 1: Mbps 2: fps 3: kfps | ||||
| ClcsQosPortStormControlBroadcastEnabled | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.5 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the storm control is enabled on this switch port. | ||||
| ClcsQosPortStormControlBroadcastRate | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the rate for the storm control. | ||||
| ClcsQosPortStormControlBroadcastUnit | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the unit of measure for the storm control rate.
0: kbps
1: Mbps
2: fps
3: kfps | ||||
| ClcsQosPortStormControlUnknownEnabled | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.8 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the storm control is enabled on this switch port. | ||||
| ClcsQosPortStormControlUnknownRate | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the rate for the storm control. | ||||
| ClcsQosPortStormControlUnknownUnit | 1.3.6.1.4.1.2356.14.2.10.1.13.1.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the unit of measure for the storm control rate.
0: kbps
1: Mbps
2: fps
3: kfps | ||||
| NlcsQosWRED | 1.3.6.1.4.1.2356.14.2.10.1.14 | |||
| TlcsQosWREDTable | 1.3.6.1.4.1.2356.14.2.10.1.14.1 | NA | ||
table · not-accessible · current The basic QoS DSCP Translation settings for all switches. | ||||
| RlcsQosWREDEntry | 1.3.6.1.4.1.2356.14.2.10.1.14.1.1 | NA | ||
| ClcsQosWREDGroupIndex | 1.3.6.1.4.1.2356.14.2.10.1.14.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The group number for which the configuration below applies. | ||||
| ClcsQosWREDQueue | 1.3.6.1.4.1.2356.14.2.10.1.14.1.1.2 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current The queue number (QoS class) for which the configuration below applies. | ||||
| ClcsQosWREDDPL | 1.3.6.1.4.1.2356.14.2.10.1.14.1.1.3 | Integer32 | NA | |
column · Integer32 · not-accessible · current The dpl number for which the configuration below applies. | ||||
| ClcsQosWREDEnable | 1.3.6.1.4.1.2356.14.2.10.1.14.1.1.4 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether RED is enabled for this queue. | ||||
| ClcsQosWREDMinThreshold | 1.3.6.1.4.1.2356.14.2.10.1.14.1.1.5 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current Controls the lower RED fill level threshold. If the queue filling level is below this threshold, the drop probability is zero. range:0-100%, default: 0. | ||||
| ClcsQosWREDMaxThreshold | 1.3.6.1.4.1.2356.14.2.10.1.14.1.1.6 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current Controls the upper RED drop probability or fill level threshold for frames marked with Drop Precedence Level 1 (yellow frames). range:0-100%, default: 50. | ||||
| ClcsQosWREDMaxUnit | 1.3.6.1.4.1.2356.14.2.10.1.14.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Selects the unit for Max. 0: Drop Probability, 1: Fill Level, default: Drop Probability.
| ||||
| NlcsQosQCLStatus | 1.3.6.1.4.1.2356.14.2.10.1.15 | |||
| TlcsQosQCLStatusTable | 1.3.6.1.4.1.2356.14.2.10.1.15.1 | NA | ||
table · not-accessible · current The basic QoS DSCP Translation settings for all switches. | ||||
| RlcsQosQCLStatusEntry | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1 | NA | ||
| ClcsQosQCLStatusList | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current QCL table index. | ||||
| ClcsQosQCLStatusUser | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the QCL user. | ||||
| ClcsQosQCLStatusQCEId | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the index of QCE. | ||||
| ClcsQosQCLStatusFrameType | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the type of frame to look for incomming frames. Any: The QCE will match all frame type. Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed. LLC: Only (LLC) frames are allowed. SNAP: Only (SNAP) frames are allowed. IPv4: The QCE will match only IPV4 frames. IPv6: The QCE will match only IPV6 frames. | ||||
| ClcsQosQCLStatusPortlist | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the list of ports configured with the QCE. | ||||
| ClcsQosQCLStatusActionQueuePriority | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Classified QoS class; if a frame matches the QCE it will be put in the queue. | ||||
| ClcsQosQCLStatusActionDPL | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL column. | ||||
| ClcsQosQCLStatusActionDSCP | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column. | ||||
| ClcsQosQCLStatusActionPCP | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current Classify PCP value. Only support SERVAL. | ||||
| ClcsQosQCLStatusActionDEL | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Classify DEI value. Only support SERVAL. | ||||
| ClcsQosQCLStatusActionPolicy | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current Classify ACL Policy number. | ||||
| ClcsQosQCLStatusConflict | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current Displays Conflict status of QCL entries. | ||||
| ClcsQosQCLStatusDMAC | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current Destination MAC address: Possible values are 'Unicast', 'Multicast', 'Broadcast' or 'Any'. | ||||
| ClcsQosQCLStatusSMAC | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.15 | DisplayString | RO | |
column · DisplayString · read-only · current Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'. | ||||
| ClcsQosQCLStatusTag | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.16 | DisplayString | RO | |
column · DisplayString · read-only · current Value of Tag field can be 'Untagged', 'Tagged', 'C-Tagged', 'S-Tagged' or 'Any'. | ||||
| ClcsQosQCLStatusVID | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current Valid value of VLAN ID can be any value in the range 1-4094 or 'Any' | ||||
| ClcsQosQCLStatusPCP | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.18 | DisplayString | RO | |
column · DisplayString · read-only · current Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. | ||||
| ClcsQosQCLStatusDEI | 1.3.6.1.4.1.2356.14.2.10.1.15.1.1.19 | DisplayString | RO | |
column · DisplayString · read-only · current Valid value of DEI can be '0', '1' or 'Any'. | ||||
| NlcsQosPortShapers | 1.3.6.1.4.1.2356.14.2.10.1.16 | |||
| TlcsQosPortShaperTable | 1.3.6.1.4.1.2356.14.2.10.1.16.1 | NA | ||
table · not-accessible · current INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosPortShaperEntry | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1 | NA | ||
| ClcsQosPortShaperQueue0Enable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.3 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the queue shaper is enabled on this switch port. | ||||
| ClcsQosPortShaperQueue0Rate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the queue shaper rate. default: 500(Kbps) | ||||
| ClcsQosPortShaperQueue0Unit | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.5 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls the unit of measure for the queue shaper rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps) | ||||
| ClcsQosPortShaperQueue1Enable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.6 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the queue shaper is enabled on this switch port. | ||||
| ClcsQosPortShaperQueue1Rate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the queue shaper rate. default: 500(Kbps) | ||||
| ClcsQosPortShaperQueue1Unit | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.8 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls the unit of measure for the queue shaper rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps) | ||||
| ClcsQosPortShaperQueue2Enable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.9 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the queue shaper is enabled on this switch port. | ||||
| ClcsQosPortShaperQueue2Rate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the queue shaper rate. default: 500(Kbps) | ||||
| ClcsQosPortShaperQueue2Unit | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.11 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls the unit of measure for the queue shaper rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps) | ||||
| ClcsQosPortShaperQueue3Enable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.12 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the queue shaper is enabled on this switch port. | ||||
| ClcsQosPortShaperQueue3Rate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the queue shaper rate. default: 500(Kbps) | ||||
| ClcsQosPortShaperQueue3Unit | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.14 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls the unit of measure for the queue shaper rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps) | ||||
| ClcsQosPortShaperQueue4Enable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.15 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the queue shaper is enabled on this switch port. | ||||
| ClcsQosPortShaperQueue4Rate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.16 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the queue shaper rate. default: 500(Kbps) | ||||
| ClcsQosPortShaperQueue4Unit | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.17 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls the unit of measure for the queue shaper rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps) | ||||
| ClcsQosPortShaperQueue5Enable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.18 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the queue shaper is enabled on this switch port. | ||||
| ClcsQosPortShaperQueue5Rate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.19 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the queue shaper rate. default: 500(Kbps) | ||||
| ClcsQosPortShaperQueue5Unit | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.20 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls the unit of measure for the queue shaper rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps) | ||||
| ClcsQosPortShaperQueue6Enable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.21 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the queue shaper is enabled on this switch port. | ||||
| ClcsQosPortShaperQueue6Rate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.22 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the queue shaper rate. default: 500(Kbps) | ||||
| ClcsQosPortShaperQueue6Unit | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.23 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls the unit of measure for the queue shaper rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps) | ||||
| ClcsQosPortShaperQueue7Enable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.24 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the queue shaper is enabled on this switch port. | ||||
| ClcsQosPortShaperQueue7Rate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.25 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the queue shaper rate. default: 500(Kbps) | ||||
| ClcsQosPortShaperQueue7Unit | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.26 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls the unit of measure for the queue shaper rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps) | ||||
| ClcsQosPortShaperEnable | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.27 | AdminMode | RW | |
column · AdminMode · read-write · current Controls whether the port shaper is enabled. | ||||
| ClcsQosPortShaperRate | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.28 | Integer32 | RW | |
column · Integer32 · read-write · current Controls the rate for the port shaper. default: 500 kbps. | ||||
| ClcsQosPortShaperRateType | 1.3.6.1.4.1.2356.14.2.10.1.16.1.1.29 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current The rate type of the port shaper. 0:Line 1:Data | ||||
| NlcsQosPortSchedulers | 1.3.6.1.4.1.2356.14.2.10.1.17 | |||
| TlcsQosPortSchedulersTable | 1.3.6.1.4.1.2356.14.2.10.1.17.1 | NA | ||
table · not-accessible · current INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsQosPortSchedulersEntry | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1 | NA | ||
| ClcsQosPortSchedulersMode | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.2 | Integer32 (0 | 8) | RW | |
column · Integer32 (0 | 8) · read-write · current 0:Strict Priority 8:Weighted | ||||
| ClcsQosPortSchedulersQ0Weight | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.3 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Controls the weight for this queue. This value is restricted to 1-100. | ||||
| ClcsQosPortSchedulersQ1Weight | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.4 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Controls the weight for this queue. This value is restricted to 1-100. | ||||
| ClcsQosPortSchedulersQ2Weight | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.5 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Controls the weight for this queue. This value is restricted to 1-100. | ||||
| ClcsQosPortSchedulersQ3Weight | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.6 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Controls the weight for this queue. This value is restricted to 1-100. | ||||
| ClcsQosPortSchedulersQ4Weight | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.7 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Controls the weight for this queue. This value is restricted to 1-100. | ||||
| ClcsQosPortSchedulersQ5Weight | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.8 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Controls the weight for this queue. This value is restricted to 1-100. | ||||
| ClcsQosPortSchedulersQ6Weight | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.9 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Controls the weight for this queue. This value is restricted to 1-100. | ||||
| ClcsQosPortSchedulersQ7Weight | 1.3.6.1.4.1.2356.14.2.10.1.17.1.1.10 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Controls the weight for this queue. This value is restricted to 1-100. | ||||
| NlcsLoopProtection | 1.3.6.1.4.1.2356.14.2.12 | |||
| NlcsLoopProtectionConfig | 1.3.6.1.4.1.2356.14.2.12.1 | |||
| SlcsLoopProtectionGlobalEnable | 1.3.6.1.4.1.2356.14.2.12.1.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Configure loop protection mode. 0: disable, 1: enable, default: disable. | ||||
| SlcsLoopProtectionTranmisstionTime | 1.3.6.1.4.1.2356.14.2.12.1.2 | Integer32 (1..10) | RW | |
scalar · Integer32 (1..10) · read-write · current Configure loop protection transmit interval. default: 5, range: 1-10. | ||||
| SlcsLoopProtectionShutdownTime | 1.3.6.1.4.1.2356.14.2.12.1.3 | Integer32 (0..604800) | RW | |
scalar · Integer32 (0..604800) · read-write · current Configure loop protection shutdown time. default: 180, range: 0-604800. | ||||
| TlcsLoopProtectionConfigurationTable | 1.3.6.1.4.1.2356.14.2.12.1.4 | NA | ||
table · not-accessible · current Show Loop Protection configurations. | ||||
| RlcsLoopProtectionConfigurationEntry | 1.3.6.1.4.1.2356.14.2.12.1.4.1 | NA | ||
row · not-accessible · current | ||||
| ClcsLoopProtectionConfPort | 1.3.6.1.4.1.2356.14.2.12.1.4.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port, range : 1 - port number. | ||||
| ClcsLoopProtectionConfEnable | 1.3.6.1.4.1.2356.14.2.12.1.4.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Configure loop protection port mode. 0: disable, 1: enable, default: enable. | ||||
| ClcsLoopProtectionConfAction | 1.3.6.1.4.1.2356.14.2.12.1.4.1.3 | Integer32 (0..2) | RW | |
column · Integer32 (0..2) · read-write · current Configure loop protection port action. 0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port. | ||||
| ClcsLoopProtectionConfTxmode | 1.3.6.1.4.1.2356.14.2.12.1.4.1.4 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Configure loop protection port transmit mode. 0: disable, 1: enable, default: enable. | ||||
| SlcsLoopProtectionConfActPort | 1.3.6.1.4.1.2356.14.2.12.1.4.1.101 | Integer32 (0..2) | RW | |
scalar · Integer32 (0..2) · read-write · current Configure loop protection act port. 0: Recipient port, 1: Source port, 2: Both, default: Recipient port. | ||||
| TlcsLoopProtectionStatusTable | 1.3.6.1.4.1.2356.14.2.12.2 | NA | ||
table · not-accessible · current Show Loop Protection Status. | ||||
| RlcsLoopProtectionStatusEntry | 1.3.6.1.4.1.2356.14.2.12.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsLoopProtectionStatusPort | 1.3.6.1.4.1.2356.14.2.12.2.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port, range : 1 - port number. | ||||
| ClcsLoopProtectionStatusAction | 1.3.6.1.4.1.2356.14.2.12.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The currently configured port action. | ||||
| ClcsLoopProtectionStatusTransmit | 1.3.6.1.4.1.2356.14.2.12.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The currently configured port transmit mode. | ||||
| ClcsLoopProtectionStatusLoops | 1.3.6.1.4.1.2356.14.2.12.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of loops detected on this port. | ||||
| ClcsLoopProtectionStatusStatus | 1.3.6.1.4.1.2356.14.2.12.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The current loop protection status of the port. | ||||
| ClcsLoopProtectionStatusLoop | 1.3.6.1.4.1.2356.14.2.12.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Whether a loop is currently detected on the port. | ||||
| ClcsLoopProtectionStatusTimeLastLoop | 1.3.6.1.4.1.2356.14.2.12.2.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The time of the last loop event detected. | ||||
| SlcsLoopProtectionStatusActPort | 1.3.6.1.4.1.2356.14.2.12.2.1.101 | DisplayString | RO | |
scalar · DisplayString · read-only · current The currently configured act port. | ||||
| NlcsPoe | 1.3.6.1.4.1.2356.14.2.13 | |||
| NlcsPoeStatus | 1.3.6.1.4.1.2356.14.2.13.1 | |||
| TlcsPoeStatusTable | 1.3.6.1.4.1.2356.14.2.13.1.1 | NA | ||
table · not-accessible · current Configure PoE Scheduling Table. | ||||
| RlcsPoeStatusEntry | 1.3.6.1.4.1.2356.14.2.13.1.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPoeStatusLocalPort | 1.3.6.1.4.1.2356.14.2.13.1.1.1.1 | Integer32 (1..10) | NA | |
column · Integer32 (1..10) · not-accessible · current Local port Index. | ||||
| ClcsPoeStatusPDclass | 1.3.6.1.4.1.2356.14.2.13.1.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the QCL user. 0: Max. power 15.4 W, 1: Max. power 4.0 W, 2: Max. power 7.0 W, 3: Max. power 15.4 W, 4: Max. power 30.0 W. | ||||
| ClcsPoeStatusPowerRequested | 1.3.6.1.4.1.2356.14.2.13.1.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The Power Requested shows the requested amount of power the PD wants to be reserved. | ||||
| ClcsPoeStatusPowerAllocated | 1.3.6.1.4.1.2356.14.2.13.1.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The Power Allocated shows the amount of power the switch has allocated for the PD. | ||||
| ClcsPoeStatusPowerUsed | 1.3.6.1.4.1.2356.14.2.13.1.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The Power Used shows how much power the PD currently is using. | ||||
| ClcsPoeStatusCurrentUsed | 1.3.6.1.4.1.2356.14.2.13.1.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The Power Used shows how much current the PD currently is using. | ||||
| ClcsPoeStatusPriority | 1.3.6.1.4.1.2356.14.2.13.1.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The Priority shows the port's priority configured by the user. | ||||
| ClcsPoeStatusPortStatus | 1.3.6.1.4.1.2356.14.2.13.1.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The Port Status shows the port's status. | ||||
| TlcsPoeStatusTotalTable | 1.3.6.1.4.1.2356.14.2.13.1.2 | NA | ||
table · not-accessible · current Configure PoE Scheduling Total Table. | ||||
| RlcsPoeStatusTotalEntry | 1.3.6.1.4.1.2356.14.2.13.1.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPoeStatusSwitchIndex | 1.3.6.1.4.1.2356.14.2.13.1.2.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Switch Index. | ||||
| ClcsPoeStatusTotalPowerRequested | 1.3.6.1.4.1.2356.14.2.13.1.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Total Power Requested. | ||||
| ClcsPoeStatusTotalPowerAllocated | 1.3.6.1.4.1.2356.14.2.13.1.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Total Power allocated. | ||||
| ClcsPoeStatusTotalPowerUsed | 1.3.6.1.4.1.2356.14.2.13.1.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Total Power Used. | ||||
| ClcsPoeStatusTotalCurrentUsed | 1.3.6.1.4.1.2356.14.2.13.1.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Total Current Used. | ||||
| NlcsPoePowerDelay | 1.3.6.1.4.1.2356.14.2.13.2 | |||
| TlcsPoePowerDelayTable | 1.3.6.1.4.1.2356.14.2.13.2.1 | NA | ||
table · not-accessible · current Configure PoE Power Delay mode. | ||||
| RlcsPoePowerDelayEntry | 1.3.6.1.4.1.2356.14.2.13.2.1.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsPoePowerDelayPort | 1.3.6.1.4.1.2356.14.2.13.2.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port, range : 1 - port number. | ||||
| ClcsPoePowerDelayMode | 1.3.6.1.4.1.2356.14.2.13.2.1.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Turn on / off the power delay function, 0: disable, 1: enable, default: disable. | ||||
| ClcsPoePowerDelayTime | 1.3.6.1.4.1.2356.14.2.13.2.1.1.3 | Integer32 (0..300) | RW | |
column · Integer32 (0..300) · read-write · current set Delay Time, default: 0, range: 0-300 sec. | ||||
| NlcsPoeAutoCheck | 1.3.6.1.4.1.2356.14.2.13.3 | |||
| SlcsPoeAutoCheckPingCheck | 1.3.6.1.4.1.2356.14.2.13.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current connection between PoE port and power device. 0: disable, 1: enable, default: disable.
| ||||
| TlcsPoeAutoCheckTable | 1.3.6.1.4.1.2356.14.2.13.3.2 | NA | ||
table · not-accessible · current Configure PoE Auto check mode. | ||||
| RlcsPoeAutoCheckEntry | 1.3.6.1.4.1.2356.14.2.13.3.2.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsPoeAutoCheckPort | 1.3.6.1.4.1.2356.14.2.13.3.2.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port, range : 1 - port number. | ||||
| ClcsPoeAutoCheckPingIPAddress | 1.3.6.1.4.1.2356.14.2.13.3.2.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current IP Address the system should ping. default: 0.0.0.0 . | ||||
| ClcsPoeAutoCheckStartupTime | 1.3.6.1.4.1.2356.14.2.13.3.2.1.3 | Integer32 (30..600) | RW | |
column · Integer32 (30..600) · read-write · current When PD has been start up, the Switch will wait Start up time to do PoE Auto Checking. default: 60, range: 30-600 sec. | ||||
| ClcsPoeAutoCheckIntervalTime | 1.3.6.1.4.1.2356.14.2.13.3.2.1.4 | Integer32 (10..120) | RW | |
column · Integer32 (10..120) · read-write · current Device will send checking message to PD each interval time. default: 30, range: 10-120 sec. | ||||
| ClcsPoeAutoCheckRetryTime | 1.3.6.1.4.1.2356.14.2.13.3.2.1.5 | Integer32 (1..5) | RW | |
column · Integer32 (1..5) · read-write · current It will retry to send detection again. default: 3, range: 1-5. | ||||
| ClcsPoeAutoCheckFailureLog | 1.3.6.1.4.1.2356.14.2.13.3.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Failure loggings counter. | ||||
| ClcsPoeAutoCheckFailureAction | 1.3.6.1.4.1.2356.14.2.13.3.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current It will retry to send detection again, 0: Nothing, 1: Reboot Remote PD, default: Nothing.
| ||||
| ClcsPoeAutoCheckRebootTime | 1.3.6.1.4.1.2356.14.2.13.3.2.1.8 | Integer32 (3..120) | RW | |
column · Integer32 (3..120) · read-write · current When PD has been rebooted, the PoE port restored power after the specified time. default: 15, range: 3-120 sec. | ||||
| ClcsPoeAutoCheckMaxRebootTimes | 1.3.6.1.4.1.2356.14.2.13.3.2.1.10 | Integer32 (0..10) | RW | |
column · Integer32 (0..10) · read-write · current When Failure Action is Reboot Remote PD, it limits times of Reboot. default: 3, range: 0-10. 0 means without reboot limits. | ||||
| NlcsPoeScheduling | 1.3.6.1.4.1.2356.14.2.13.4 | |||
| SlcsPoeSchedulingProfileNumber | 1.3.6.1.4.1.2356.14.2.13.4.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specify the PoE Profile Number that want to configure. Range:1-16 | ||||
| SlcsPoeSchedulingPorofileName | 1.3.6.1.4.1.2356.14.2.13.4.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current Profile Name. Maximum length:32. | ||||
| TlcsPoeSchedulingTimeTable | 1.3.6.1.4.1.2356.14.2.13.4.3 | NA | ||
table · not-accessible · current Show Poe Scheduling Time Config. | ||||
| RlcsPoeSchedulingTimeEntry | 1.3.6.1.4.1.2356.14.2.13.4.3.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPoeSchedulingTimeWeekIndex | 1.3.6.1.4.1.2356.14.2.13.4.3.1.1 | Integer32 (1..7) | NA | |
column · Integer32 (1..7) · not-accessible · current Week Index. 1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun | ||||
| ClcsPoeSchedulingTimeStartTimeHourMinute | 1.3.6.1.4.1.2356.14.2.13.4.3.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current PoE Scheduling Start Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55. | ||||
| ClcsPoeSchedulingTimeEndTimeHourMinute | 1.3.6.1.4.1.2356.14.2.13.4.3.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current PoE Scheduling End Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55. | ||||
| NlcsPoeConfiguration | 1.3.6.1.4.1.2356.14.2.13.5 | |||
| SlcsPoeConfigurationPowerManagementMode | 1.3.6.1.4.1.2356.14.2.13.5.1 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current The power management mode for PoE port. 0: CLASS_RESERVED, 1: CLASS_CONSUMP, 2: ALLOCATED_RESERVED, 3: ALLOCATED_CONSUMP, 4: LLDPMED_RESERVED, 5: LLDPMED_CONSUMP, default: CLASS_RESERVED. | ||||
| SlcsPoeConfigurationLegacyPDDetection | 1.3.6.1.4.1.2356.14.2.13.5.2 | Integer32 (0..1) | RW | |
scalar · Integer32 (0..1) · read-write · current The capacitor detection mode. 0: Disable 1: Enable | ||||
| TlcsPoeConfigurationTable | 1.3.6.1.4.1.2356.14.2.13.5.4 | NA | ||
table · not-accessible · current Configure PoE Configuration mode. | ||||
| RlcsPoeConfigurationEntry | 1.3.6.1.4.1.2356.14.2.13.5.4.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPoeConfigurationSwitch | 1.3.6.1.4.1.2356.14.2.13.5.4.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current switch index, range : 1 - 16. | ||||
| ClcsPoeConfigurationPoEFirmwareVersion | 1.3.6.1.4.1.2356.14.2.13.5.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current PoE Firmware Version. | ||||
| ClcsPoeConfigurationPrimaryPowerSupply | 1.3.6.1.4.1.2356.14.2.13.5.4.1.3 | Integer32 (0..2000) | RO | |
column · Integer32 (0..2000) · read-only · current It must be defined what amount of power the primary and backup power sources can deliver. | ||||
| TlcsPoeConfigurationPortTable | 1.3.6.1.4.1.2356.14.2.13.5.5 | NA | ||
table · not-accessible · current Configure PoE Port Configuration mode. | ||||
| RlcsPoeConfigurationPortEntry | 1.3.6.1.4.1.2356.14.2.13.5.5.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPoeConfigurationPort | 1.3.6.1.4.1.2356.14.2.13.5.5.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port, range : 1 - port number. | ||||
| ClcsPoeConfigurationPortPoEMode | 1.3.6.1.4.1.2356.14.2.13.5.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The PoE Mode represents the PoE operating mode for the port. 0: Disable, 1: Enable, 2: 4-Pair 60W, 3: 4-Pair 90W, 4: 802.3bt, default: Enable.
| ||||
| ClcsPoeConfigurationPortPriority | 1.3.6.1.4.1.2356.14.2.13.5.5.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The Priority represents the ports priority. There are three levels of power priority named Low, High and Critical. 0: Low, 1: High, 2: Critical, default: Low.
| ||||
| ClcsPoeConfigurationPortMaximumPower | 1.3.6.1.4.1.2356.14.2.13.5.5.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current The Maximum Power value contains a numerical value that indicates the maximum power in watts that can be delivered to a remote device. max: 30[W]. | ||||
| ClcsPoeConfigurationPortDetection | 1.3.6.1.4.1.2356.14.2.13.5.5.1.5 | Integer32 (1..5) | RW | |
column · Integer32 (1..5) · read-write · current The Detection represents the PoE capacitor detection for the port. -1:Not support. 1:Legacy : Legacy capacitive detection only. 2:4-point : IEEE 802.3af 4-point detection only. 3:4-point-legacy : IEEE 802.3af 4-point detection followed by Legacy detection. 4:2-point : IEEE 802.3af 2-point detection only. 5:2-point-legacy : IEEE 802.3af 2-point detection followed by Legacy detection. | ||||
| ClcsPoeConfigurationPortPoEScheduleByProfileName | 1.3.6.1.4.1.2356.14.2.13.5.5.1.7 | DisplayString | RW | |
column · DisplayString · read-write · current Specify a valid PoE schedule profile by profile name. disabled: disable profile schedule. | ||||
| ClcsPoeConfigurationPortDelayMode | 1.3.6.1.4.1.2356.14.2.13.5.5.1.8 | Integer32 (0..1) | RW | |
column · Integer32 (0..1) · read-write · current Turn on off the power delay function. 0: Disable 1: Enable | ||||
| ClcsPoeConfigurationPortDelayTime | 1.3.6.1.4.1.2356.14.2.13.5.5.1.9 | Integer32 (0..300) | RW | |
column · Integer32 (0..300) · read-write · current When rebooting, the PoE port will start to provide power to the PD when it out of delay time. Range:0-300 | ||||
| NlcsPoeChipsetRebootSchedule | 1.3.6.1.4.1.2356.14.2.13.6 | |||
| SlcsPoeChipsetRebootMode | 1.3.6.1.4.1.2356.14.2.13.6.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current PoE Chipset Reboot Mode 0:disable 1:enable | ||||
| TlcsPoeChipsetRebootTimeTable | 1.3.6.1.4.1.2356.14.2.13.6.2 | NA | ||
table · not-accessible · current Configure PoE Chipset Reboot Time. | ||||
| RlcsPoeChipsetRebootTimeEntry | 1.3.6.1.4.1.2356.14.2.13.6.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPoeChipsetRebootWeekIndex | 1.3.6.1.4.1.2356.14.2.13.6.2.1.1 | Integer32 (1..7) | NA | |
column · Integer32 (1..7) · not-accessible · current PoE chipset reboot week index. 1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun | ||||
| ClcsPoeChipsetRebootTimeHour | 1.3.6.1.4.1.2356.14.2.13.6.2.1.2 | Integer32 (-1..23) | RW | |
column · Integer32 (-1..23) · read-write · current PoE Chipset Reboot Time (Hour). Range: 0-23. -1:disable | ||||
| ClcsPoeChipsetRebootTimeMinute | 1.3.6.1.4.1.2356.14.2.13.6.2.1.3 | Integer32 (-1..55) | RW | |
column · Integer32 (-1..55) · read-write · current PoE Chipset Reboot Time (Minute). Range:0,5,10,...,55. -1:disable | ||||
| NlcsAAAMIB | 1.3.6.1.4.1.2356.14.2.15 | |||
| NlcsAAA | 1.3.6.1.4.1.2356.14.2.15.1 | |||
| NlcsRADIUS | 1.3.6.1.4.1.2356.14.2.15.1.1 | |||
| NlcsRADIUSGlobalConfig | 1.3.6.1.4.1.2356.14.2.15.1.1.1 | |||
| SlcsRADIUSGlobalConfigTimeout | 1.3.6.1.4.1.2356.14.2.15.1.1.1.1 | Integer32 (1..1000) | RW | |
scalar · Integer32 (1..1000) · read-write · current Timeout is the number of seconds, to wait for a reply from a RADIUS server before retransmitting the request. range: 1-1000. | ||||
| SlcsRADIUSGlobalConfigRetransmit | 1.3.6.1.4.1.2356.14.2.15.1.1.1.2 | Integer32 (1..1000) | RW | |
scalar · Integer32 (1..1000) · read-write · current Retransmit is the number of times,a RADIUS request is retransmitted to a server that is not responding.If the server has not responded after the last retransmit it is considered to be dead. range: 1-1000. | ||||
| SlcsRADIUSGlobalConfigDeadtime | 1.3.6.1.4.1.2356.14.2.15.1.1.1.3 | Integer32 (0..1440) | RW | |
scalar · Integer32 (0..1440) · read-write · current This will stop the switch from continually trying to contact a server that it has already determined as dead. range: 0-1440. | ||||
| SlcsRADIUSGlobalConfigKey | 1.3.6.1.4.1.2356.14.2.15.1.1.1.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current The secret key shared between the RADIUS server and the switch. On set sets the plain value as secret key, on get only returns an encrypted value. | ||||
| SlcsRADIUSGlobalConfigNASIPv4 | 1.3.6.1.4.1.2356.14.2.15.1.1.1.5 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. Setting 0.0.0.0 will disable this attribute. | ||||
| SlcsRADIUSGlobalConfigNASIPv6 | 1.3.6.1.4.1.2356.14.2.15.1.1.1.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current The IPv6 address to be used as attribute 95 in RADIUS Access-Request packets. Leaving it blank will disable this attribute. | ||||
| SlcsRADIUSGlobalConfigNASIdentifier | 1.3.6.1.4.1.2356.14.2.15.1.1.1.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current The identifier to be used as attribute 32 in RADIUS Access-Request packets. Leaving it blank will disable this attribute. | ||||
| SlcsRADIUSGlobalConfigKeyHashed | 1.3.6.1.4.1.2356.14.2.15.1.1.1.50 | DisplayString | RW | |
scalar · DisplayString · read-write · current The secret key shared between the RADIUS server and the switch. On set sets the value as encrypted secret key, on get returns the encrypted value. | ||||
| SlcsRADIUSGlobalConfigKeyWrite | 1.3.6.1.4.1.2356.14.2.15.1.1.1.51 | DisplayString | RW | |
scalar · DisplayString · read-write · current The secret key shared between the RADIUS server and the switch. On set sets the value as secret key, on get always returns empty string. | ||||
| TlcsRADIUSMacformatTable | 1.3.6.1.4.1.2356.14.2.15.1.1.1.100 | NA | ||
table · not-accessible · current The RADIUS / NAS Mac Format Configuration Table. | ||||
| RlcsRADIUSMacformatEntry | 1.3.6.1.4.1.2356.14.2.15.1.1.1.100.1 | NA | ||
row · not-accessible · current The RADIUS / NAS Mac Format Configuration Entry. | ||||
| ClcsRADIUSMacformatIndex | 1.3.6.1.4.1.2356.14.2.15.1.1.1.100.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The Mac Format index. 1: Mac Format for the Called-Station Attribute 2: Mac Format for the Calling-Station Attribute 3: Mac Format for the Identity for Mac-Based Auth
| ||||
| ClcsRADIUSMacformatGroupsize | 1.3.6.1.4.1.2356.14.2.15.1.1.1.100.1.2 | INTEGER (1 | 2 | 4 | 12) | RW | |
column · INTEGER (1 | 2 | 4 | 12) · read-write · current The Groupsize in which the Mac Address will be formatted. 1: x-x-x-x-x-x-x-x-x-x-x-x 2: xx-xx-xx-xx-xx-xx 4: xxxx-xxxx-xxxx 12: xxxxxxxxxxxx | ||||
| ClcsRADIUSMacformatSeparator | 1.3.6.1.4.1.2356.14.2.15.1.1.1.100.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The Separator to use for separating the character groups. 0: Hypen (-) 1: Colon (:) 2: Dot (.)
| ||||
| ClcsRADIUSMacformatCase | 1.3.6.1.4.1.2356.14.2.15.1.1.1.100.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Whether to format the hex characters lowercase or uppercase. 0: Lowercase 1: Uppercase
| ||||
| TlcsRADIUSServerConfigTable | 1.3.6.1.4.1.2356.14.2.15.1.1.2 | NA | ||
table · not-accessible · current The RADIUS Server Configuration Table. | ||||
| RlcsRADIUSServerConfigEntry | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1 | NA | ||
row · not-accessible · current The RADIUS Server Configuration Entry. | ||||
| ClcsRADIUSServerConfServerNo | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.1 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The RADIUS server number. max: 5. | ||||
| ClcsRADIUSServerConfHostname | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current The IP address or hostname of the RADIUS server. | ||||
| ClcsRADIUSServerConfAuthPort | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.3 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The UDP port to use on the RADIUS server for authentication. range: 0-65535. | ||||
| ClcsRADIUSServerConfAcctPort | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.4 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The UDP port to use on the RADIUS server for accounting. range: 0-65535. | ||||
| ClcsRADIUSServerConfTimeout | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.5 | Integer32 (0..1000) | RC | |
column · Integer32 (0..1000) · read-create · current This optional setting overrides the global timeout value. Setting to 0 will use the global timeout value. range: 1-1000. | ||||
| ClcsRADIUSServerConfRetransmit | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.6 | Integer32 (0..1000) | RC | |
column · Integer32 (0..1000) · read-create · current This optional setting overrides the global retransmit value. Setting to 0 will use the global retransmit value. range: 1-1000. | ||||
| ClcsRADIUSServerConfKey | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.7 | DisplayString | RC | |
column · DisplayString · read-create · current This optional setting overrides the global key. Leaving it blank will use the global key. On set sets the plain value as secret key, on get only returns an encrypted value. | ||||
| ClcsRADIUSServerConfRowStatus | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| SlcsRADIUSServerConfKeyHashed | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.50 | DisplayString | RC | |
scalar · DisplayString · read-create · current This optional setting overrides the global key. Leaving it blank will use the global key. On set sets the value as encrypted secret key, on get returns the encrypted value. | ||||
| SlcsRADIUSServerConfKeyWrite | 1.3.6.1.4.1.2356.14.2.15.1.1.2.1.51 | DisplayString | RC | |
scalar · DisplayString · read-create · current This optional setting overrides the global key. Leaving it blank will use the global key. On set sets the value as secret key, on get always returns empty string. | ||||
| TlcsRADIUSDetailTable | 1.3.6.1.4.1.2356.14.2.15.1.1.3 | NA | ||
table · not-accessible · current The RADIUS Detail Table. | ||||
| RlcsRADIUSDetailEntry | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1 | NA | ||
| ClcsRADIUSAuthIPAddress | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current IP address and UDP port for the authentication server in question. | ||||
| ClcsRADIUSAuthStatus | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Shows the state of the server. | ||||
| ClcsRADIUSAuthRoundTripTime | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.4 | Integer32 (0..100000000) | RO | |
column · Integer32 (0..100000000) · read-only · current The time interval (measured in milliseconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authentication server. | ||||
| ClcsRADIUSAuthRxAccessAccept | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Accept packets (valid or invalid) received from the server. | ||||
| ClcsRADIUSAuthRxAccessReject | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Reject packets (valid or invalid) received from the server. | ||||
| ClcsRADIUSAuthRxAccessChallenge | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Challenge packets (valid or invalid) received from the server. | ||||
| ClcsRADIUSAuthRxAccessResponse | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of malformed RADIUS Access-Response packets received from the server. | ||||
| ClcsRADIUSAuthRxBadAuth | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from the server. | ||||
| ClcsRADIUSAuthRxUnknownType | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets that were received with unknown types from the server on the authentication port and dropped. | ||||
| ClcsRADIUSAuthRxPacketsDropped | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets that were received from the server on the authentication port and dropped for some other reason. | ||||
| ClcsRADIUSAuthTxAccessRequest | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets sent to the server. This does not include retransmissions. | ||||
| ClcsRADIUSAuthTxAccessRetransmission | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets retransmitted to the RADIUS authentication server. | ||||
| ClcsRADIUSAuthTxPendingRequest | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets destined for the server that have not yet timed out or received a response. | ||||
| ClcsRADIUSAuthTxTimeout | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of authentication timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up. | ||||
| ClcsRADIUSAccountIPAddress | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.16 | IpAddress | RO | |
column · IpAddress · read-only · current IP address and UDP port for the authentication server in question. | ||||
| ClcsRADIUSAccountStatus | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current Shows the state of the server. | ||||
| ClcsRADIUSAccountRoundTripTime | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.18 | Integer32 (0..100000000) | RO | |
column · Integer32 (0..100000000) · read-only · current The time interval (measured in milliseconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authentication server. | ||||
| ClcsRADIUSAccountRxResponses | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets (valid or invalid) received from the server. | ||||
| ClcsRADIUSAccountRxMalformedResponse | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of malformed RADIUS packets received from the server. | ||||
| ClcsRADIUSAccountRxBadAuth | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets containing invalid authenticators received from the server. | ||||
| ClcsRADIUSAccountRxUnknownType | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets of unknown types that were received from the server on the accounting port. | ||||
| ClcsRADIUSAccountRxPacketsDrop | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets that were received from the server on the accounting port and dropped for some other reason. | ||||
| ClcsRADIUSAccountTxRequest | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets sent to the server. This does not include retransmissions. | ||||
| ClcsRADIUSAccountTxRetransmission | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets retransmitted to the RADIUS accounting server. | ||||
| ClcsRADIUSAccountTxPendingRequest | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets destined for the server that have not yet timed out or received a response. | ||||
| ClcsRADIUSAccountTxTimeout | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current The number of accounting timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up. | ||||
| ClcsRADIUSDetailClearCmd | 1.3.6.1.4.1.2356.14.2.15.1.1.3.1.28 | ActivateCmd | RO | |
column · ActivateCmd · read-only · current Clears the counters for the selected server. | ||||
| NlcsTACACS | 1.3.6.1.4.1.2356.14.2.15.1.2 | |||
| SlcsTACACSGlobalConfigTimeout | 1.3.6.1.4.1.2356.14.2.15.1.2.1 | Integer32 (1..1000) | RW | |
scalar · Integer32 (1..1000) · read-write · current Timeout is the number of seconds,to wait for a reply from a TACACS+ server before it is considered to be dead. range: 1-1000 seconds, default: 5 seconds. | ||||
| SlcsTACACSGlobalConfigDeadtime | 1.3.6.1.4.1.2356.14.2.15.1.2.2 | Integer32 (0..1440) | RW | |
scalar · Integer32 (0..1440) · read-write · current The period during which the switch will not send new requests to a server that has failed to respond to a previous request. This will stop the switch from continually trying to contact a server that it has already determined as dead. range: 0-1440 minutes, default: 0 minutes. | ||||
| SlcsTACACSGlobalConfigKey | 1.3.6.1.4.1.2356.14.2.15.1.2.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current The secret key shared between the TACACS+ server and the switch. | ||||
| TlcsTACACSServerConfigTable | 1.3.6.1.4.1.2356.14.2.15.1.2.4 | NA | ||
table · not-accessible · current The TACACS Server configuration Table. | ||||
| RlcsTACACSServerConfigEntry | 1.3.6.1.4.1.2356.14.2.15.1.2.4.1 | NA | ||
row · not-accessible · current The TACACS Server configuration Entry. | ||||
| ClcsTACACSServerConfigServerNo | 1.3.6.1.4.1.2356.14.2.15.1.2.4.1.1 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The TACACS server number. max: 5. | ||||
| ClcsTACACSServerConfigHostname | 1.3.6.1.4.1.2356.14.2.15.1.2.4.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current The IP address or hostname of the TACACS+ server. | ||||
| ClcsTACACSServerConfigPort | 1.3.6.1.4.1.2356.14.2.15.1.2.4.1.3 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The TCP port to use on the TACACS+ server for authentication. | ||||
| ClcsTACACSServerConfigTimeout | 1.3.6.1.4.1.2356.14.2.15.1.2.4.1.4 | Integer32 (1..1000) | RC | |
column · Integer32 (1..1000) · read-create · current This optional setting overrides the global timeout value. Leaving it blank will use the global timeout value. range: 1-1000. | ||||
| ClcsTACACSServerConfigKey | 1.3.6.1.4.1.2356.14.2.15.1.2.4.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current This optional setting overrides the global key. Leaving it blank will use the global key. | ||||
| ClcsTACACSServerConfigRowStatus | 1.3.6.1.4.1.2356.14.2.15.1.2.4.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsNasMIB | 1.3.6.1.4.1.2356.14.2.16 | |||
| NlcsNAS | 1.3.6.1.4.1.2356.14.2.16.1 | |||
| NlcsNASConf | 1.3.6.1.4.1.2356.14.2.16.1.1 | |||
| SlcsNASConfMode | 1.3.6.1.4.1.2356.14.2.16.1.1.1 | AdminMode | RW | |
scalar · AdminMode · read-write · current Indicates if NAS is globally enabled or disabled on the switch. | ||||
| SlcsNASConfReauthenticationEnabled | 1.3.6.1.4.1.2356.14.2.16.1.1.2 | AdminMode | RW | |
scalar · AdminMode · read-write · current If enable, successfully authenticated supplicants/clients are reauthenticated after the interval specified by the Reauthentication Period. | ||||
| SlcsNASConfReauthenticationPeriod | 1.3.6.1.4.1.2356.14.2.16.1.1.3 | Integer32 (1..3600) | RW | |
scalar · Integer32 (1..3600) · read-write · current Determines the period, in seconds, after which a connected client must be reauthenticated. default: 3600 sec, range: 1-3600 sec. | ||||
| SlcsNASConfEAPOLTimeout | 1.3.6.1.4.1.2356.14.2.16.1.1.4 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Determines the time for retransmission of Request Identity EAPOL frames. default: 30 sec, range: 1-65535 sec. | ||||
| SlcsNASConfAgingPeriod | 1.3.6.1.4.1.2356.14.2.16.1.1.5 | Integer32 (0 | 10..1000000) | RW | |
scalar · Integer32 (0 | 10..1000000) · read-write · current When the NAS module uses the Port Security module to secure MAC addresses, the Port Security module needs to check for activity on the MAC address in question at regular intervals and free resources if no activity is seen within a given period of time. default: 300 sec, 0: no support. range: 0,10-1000000 sec. | ||||
| SlcsNASConfHoldTime | 1.3.6.1.4.1.2356.14.2.16.1.1.6 | Integer32 (0 | 10..1000000) | RW | |
scalar · Integer32 (0 | 10..1000000) · read-write · current If a client is denied access - either because the RADIUS server denies the client access or because the RADIUS server request times out - the client is put on hold in the Unauthorized state. default: 10 sec, 0: no support. range: 0,10-1000000 sec. | ||||
| SlcsNASConfRADIUSQoSEnabled | 1.3.6.1.4.1.2356.14.2.16.1.1.7 | AdminMode | RW | |
scalar · AdminMode · read-write · current RADIUS-assigned QoS provides a means to centrally control the traffic class to which traffic coming from a successfully authenticated supplicant is assigned on the switch. | ||||
| SlcsNASConfRADIUSVLANEnabled | 1.3.6.1.4.1.2356.14.2.16.1.1.8 | AdminMode | RW | |
scalar · AdminMode · read-write · current RADIUS-assigned VLAN provides a means to centrally control the VLAN on which a successfully authenticated supplicant is placed on the switch. | ||||
| SlcsNASConfGuestVLANEnabled | 1.3.6.1.4.1.2356.14.2.16.1.1.9 | AdminMode | RW | |
scalar · AdminMode · read-write · current A Guest VLAN is a special VLAN - typically with limited network access - on which 802.1X-unaware clients are placed after a network administrator-defined timeout. | ||||
| SlcsNASConfGuestVLANID | 1.3.6.1.4.1.2356.14.2.16.1.1.10 | Integer32 (1..4094) | RW | |
scalar · Integer32 (1..4094) · read-write · current This is the value that a port's Port VLAN ID is set to if a port is moved into the Guest VLAN. default: 1, range: 1-4094. | ||||
| SlcsNASConfMaxReauthCount | 1.3.6.1.4.1.2356.14.2.16.1.1.11 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current The number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this setting. default: 2, range: 1-255. | ||||
| SlcsNASConfAllowGuestVLAN | 1.3.6.1.4.1.2356.14.2.16.1.1.12 | AdminMode | RW | |
scalar · AdminMode · read-write · current The switch remembers if an EAPOL frame has been received on the port for the life-time of the port. | ||||
| TlcsNASPortConfTable | 1.3.6.1.4.1.2356.14.2.16.1.1.13 | NA | ||
table · not-accessible · current The NAS Port Configuration Table. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsNASPortConfEntry | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1 | NA | ||
| ClcsNASPortConfAdminState | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1.2 | Integer32 (0..6) | RW | |
column · Integer32 (0..6) · read-write · current This selection controls the port's authentication mode. 0: Force Authorized, 1: Force Unauthorized, 2: Port-based 802.1X, 3: Single 802.1X, 4: Multi 802.1X, 5: MAC-based Auth, 6: MAC-based Single Auth. range: 0-6. | ||||
| ClcsNASPortConfRADIUSQoSEnabled | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1.3 | AdminMode | RW | |
column · AdminMode · read-write · current When RADIUS-Assigned QoS is both globally enabled and enabled on a given port, the switch reacts to QoS Class information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant is successfully authenticated. | ||||
| ClcsNASPortConfRADIUSVLANEnabled | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1.4 | AdminMode | RW | |
column · AdminMode · read-write · current When RADIUS-Assigned VLAN is both globally enabled and enabled for a given port, the switch reacts to VLAN ID information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant is successfully authenticated. | ||||
| ClcsNASPortConfGuestVLANEnabled | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1.5 | AdminMode | RW | |
column · AdminMode · read-write · current When Guest VLAN is both globally enabled and enabled for a given port, the switch considers moving the port into the Guest VLAN according to the rules. | ||||
| ClcsNASPortConfPortState | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The current state of the port. | ||||
| ClcsNASPortConfReauthenticateCmd | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1.7 | ActivateCmd | RW | |
column · ActivateCmd · read-write · current Schedules a reauthentication whenever the quiet-period of the port runs out (EAPOL-based authentication). For MAC-based authentication, reauthentication will be attempted immediately.The button only has effect for successfully authenticated clients on the port and will not cause the clients to get temporarily unauthorized. | ||||
| ClcsNASPortConfReinitializeCmd | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1.8 | ActivateCmd | RW | |
column · ActivateCmd · read-write · current Forces a reinitialization of the clients on the port and thereby a reauthentication immediately. The clients will transfer to the unauthorized state while the reauthentication is in progress. | ||||
| ClcsNASPortConfFallbackEnabled | 1.3.6.1.4.1.2356.14.2.16.1.1.13.1.101 | AdminMode | RW | |
column · AdminMode · read-write · current When Fallback is enabled, the switch will take over the supplicants role after max reauthentication count is reached and tries to authenticate the client on its behalf as described for MAC-based Auth. Admin State supported : Single and Multi 802.1X. | ||||
| SlcsNASConfMacBasedUseEAP | 1.3.6.1.4.1.2356.14.2.16.1.1.101 | AdminMode | RW | |
scalar · AdminMode · read-write · current The switch can do the RADIUS authentication on behalf of the client in the MAC-based Auth. port authentication mode. It can either present itself as a normal 802.1X client to the RADIUS Server and use EAP, supporting only the MD5-Challenge, or alternativly can use plain RADIUS with username / passwort authentification without EAP if this setting is disabled. | ||||
| NlcsNASStatus | 1.3.6.1.4.1.2356.14.2.16.1.2 | |||
| TlcsNASSwitchStatusTable | 1.3.6.1.4.1.2356.14.2.16.1.2.1 | NA | ||
table · not-accessible · current The NAS Switch Status Table. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsNASSwitchStatusEntry | 1.3.6.1.4.1.2356.14.2.16.1.2.1.1 | NA | ||
| ClcsNASSwitchStatusAdminState | 1.3.6.1.4.1.2356.14.2.16.1.2.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The port's current administrative state. | ||||
| ClcsNASSwitchStatusPortState | 1.3.6.1.4.1.2356.14.2.16.1.2.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The current state of the port. | ||||
| ClcsNASSwitchStatusLastSource | 1.3.6.1.4.1.2356.14.2.16.1.2.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication, and the most recently received frame from a new client for MAC-based authentication. | ||||
| ClcsNASSwitchStatusLastID | 1.3.6.1.4.1.2356.14.2.16.1.2.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame for EAPOL-based authentication, and the source MAC address from the most recently received frame from a new client for MAC-based authentication. | ||||
| ClcsNASSwitchStatusQoSClass | 1.3.6.1.4.1.2356.14.2.16.1.2.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current QoS Class assigned to the port by the RADIUS server if enabled. | ||||
| ClcsNASSwitchStatusPortVLANID | 1.3.6.1.4.1.2356.14.2.16.1.2.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The VLAN ID that NAS has put the port in. | ||||
| TlcsNASPortCounterTable | 1.3.6.1.4.1.2356.14.2.16.1.2.2 | NA | ||
table · not-accessible · current The NAS Port Counter Table. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsNASPortCounterEntry | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1 | NA | ||
| ClcsNASReceiveEAPOLTotal | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.2 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of valid EAPOL frames of any type that have been received by the switch. -1: no support. | ||||
| ClcsNASReceiveEAPOLResponseID | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.3 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of valid EAPOL Response Identity frames that have been received by the switch. -1: no support. | ||||
| ClcsNASReceiveEAPOLResponses | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.4 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch. -1: no support. | ||||
| ClcsNASReceiveEAPOLStart | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.5 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of EAPOL Start frames that have been received by the switch. -1: no support. | ||||
| ClcsNASReceiveEAPOLLogoff | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.6 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of valid EAPOL Logoff frames that have been received by the switch. -1: no support. | ||||
| ClcsNASReceiveEAPOLInvalidType | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.7 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of EAPOL frames that have been received by the switch in which the frame type is not recognized. -1: no support. | ||||
| ClcsNASReceiveEAPOLInvalidLength | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.8 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid. -1: no support. | ||||
| ClcsNASTransmitEAPOLTotal | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.9 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of EAPOL frames of any type that have been transmitted by the switch. -1: no support. | ||||
| ClcsNASTransmitEAPOLRequestID | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.10 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of EAPOL Request Identity frames that have been transmitted by the switch. -1: no support. | ||||
| ClcsNASTransmitEAPOLRequests | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.11 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch. -1: no support. | ||||
| ClcsNASPortReceiveBackendServerAccessChallenges | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.12 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current 802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. Indicates that the backend server has communication with the switch. MAC-based:Counts all Access Challenges received from the backend server for this port (left-most table). -1: no support. | ||||
| ClcsNASPortReceiveBackendServerOtherRequests | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.13 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current 802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. Indicates that the backend server chose an EAP-method. MAC-based: Not applicable. -1: no support. | ||||
| ClcsNASPortReceiveBackendServerAuthSuccesses | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.14 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current 802.1X- and MAC-based: Counts the number of times that the switch receives a success indication.Indicates that the supplicant has successfully authenticated to the backend server. -1: no support. | ||||
| ClcsNASPortReceiveBackendServerAuthFailures | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.15 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current 802.1X- and MAC-based:Counts the number of times that the switch receives a failure message.This indicates that the supplicant has not authenticated to the backend server. -1: no support. | ||||
| ClcsNASPortTransmitBackendServerResponses | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.16 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current 802.1X-based:Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch attempted communication with the backend server. Possible retransmissions are not counted. MAC-based: Counts all the backend server packets sent from the switch towards the backend server for a given port (left-most table). Possible retransmissions are not counted. -1: no support. | ||||
| ClcsNASSupplicantInfoMAC | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current The MAC address of the last supplicant. | ||||
| ClcsNASSupplicantInfoVlanID | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.18 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current The VLAN ID on which the last frame from the last supplicant was received. -1: no support. | ||||
| ClcsNASSupplicantInfoVersion | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.19 | Integer32 (-1..1000000) | RO | |
column · Integer32 (-1..1000000) · read-only · current 802.1X-based:The protocol version number carried in the most recently received EAPOL frame. MAC-based: Not applicable. -1: no support. | ||||
| ClcsNASSupplicantInfoIdentity | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.20 | DisplayString | RO | |
column · DisplayString · read-only · current 802.1X-based:The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame. MAC-based: Not applicable. | ||||
| ClcsNASPortCounterClearCmd | 1.3.6.1.4.1.2356.14.2.16.1.2.2.1.21 | ActivateCmd | RW | |
column · ActivateCmd · read-write · current Clear the counters for the selected port. | ||||
| NlcsMACConf | 1.3.6.1.4.1.2356.14.2.17 | |||
| NlcsMAC | 1.3.6.1.4.1.2356.14.2.17.1 | |||
| SlcsMACDisableAutomaticAging | 1.3.6.1.4.1.2356.14.2.17.1.1 | AdminMode | RW | |
scalar · AdminMode · read-write · current Disable the automatic aging of dynamic entries. | ||||
| SlcsMACAgingTime | 1.3.6.1.4.1.2356.14.2.17.1.2 | Integer32 (-1 | 10..1000000) | RW | |
scalar · Integer32 (-1 | 10..1000000) · read-write · current Configure aging time by entering a value here in seconds. range: 10-1000000 seconds. -1: Automatic Aging is disable. | ||||
| TlcsMACLearningTable | 1.3.6.1.4.1.2356.14.2.17.1.3 | NA | ||
table · not-accessible · current The mac learning table. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsMACLearningEntry | 1.3.6.1.4.1.2356.14.2.17.1.3.1 | NA | ||
| ClcsMACTableLearning | 1.3.6.1.4.1.2356.14.2.17.1.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current auto(0) : Learning is done automatically as soon as a
frame with unknown SMAC is received.
disable(1): Disable, No learning is done.
secure(2) : Secure, Only static MAC entries are learned,
all other frames are dropped.
| ||||
| SlcsLearningDisabledVLANs | 1.3.6.1.4.1.2356.14.2.17.1.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current The Learning Disabled VLANs | ||||
| TlcsMACStaticConfigTable | 1.3.6.1.4.1.2356.14.2.17.1.5 | NA | ||
table · not-accessible · current The static Mac config table. | ||||
| RlcsMACStaticConfigEntry | 1.3.6.1.4.1.2356.14.2.17.1.5.1 | NA | ||
| ClcsMACStaticConfigSwitchIndex | 1.3.6.1.4.1.2356.14.2.17.1.5.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Switch Index. | ||||
| ClcsMACStaticConfigIndex | 1.3.6.1.4.1.2356.14.2.17.1.5.1.2 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current The static entries in the MAC table are shown in this table. The static MAC table can contain 64 entries. | ||||
| ClcsMACStaticConfigVID | 1.3.6.1.4.1.2356.14.2.17.1.5.1.3 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current The VLAN ID of the entry. range: 1-4094. | ||||
| ClcsMACStaticConfigMACaddress | 1.3.6.1.4.1.2356.14.2.17.1.5.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current The MAC address of the entry. | ||||
| ClcsMACStaticConfigPortList | 1.3.6.1.4.1.2356.14.2.17.1.5.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current Checkmarks indicate which ports are members of the entry. Check or uncheck as needed to modify the entry. | ||||
| ClcsMACStaticConfigRowStatus | 1.3.6.1.4.1.2356.14.2.17.1.5.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsSpanningTree | 1.3.6.1.4.1.2356.14.2.18 | |||
| NlcsBridgeSettings | 1.3.6.1.4.1.2356.14.2.18.1 | |||
| SlcsSTPProtocolVersion | 1.3.6.1.4.1.2356.14.2.18.1.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:STP 2:RSTP 3:MSTP | ||||
| SlcsBridgePriority | 1.3.6.1.4.1.2356.14.2.18.1.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Bridge Priority, range: 0-61440, multiple of 4096. | ||||
| SlcsBridgeForwardDelay | 1.3.6.1.4.1.2356.14.2.18.1.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Bridge Forward Delay, range: 4-30 seconds. | ||||
| SlcsBridgeMaxAge | 1.3.6.1.4.1.2356.14.2.18.1.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Bridge MaxAge, range:6-40 seconds. | ||||
| SlcsBridgeMaxHops | 1.3.6.1.4.1.2356.14.2.18.1.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current Bridge Max Hops, range:6-40 hops. | ||||
| SlcsBridgetxHoldCount | 1.3.6.1.4.1.2356.14.2.18.1.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current Bridge Transmit Hold Count,range: 1-10 bpdu's per second. | ||||
| SlcsBridgeBPDUFilter | 1.3.6.1.4.1.2356.14.2.18.1.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current Bridge BPD UFilter 0:disable 1:enable | ||||
| SlcsBridgeBPDUGuard | 1.3.6.1.4.1.2356.14.2.18.1.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current Bridge BPDU Guard 0:disable 1:enable | ||||
| SlcsBridgeerrorRecoveryDelay | 1.3.6.1.4.1.2356.14.2.18.1.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current Bridge error Recovery Delay range:30-86400 seconds 0:disable | ||||
| SlcsBridgeHelloTime | 1.3.6.1.4.1.2356.14.2.18.1.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current The interval between sending STP BPDU's. Valid values are in the range 1 to 10 seconds, default:2 seconds. | ||||
| NlcsMSTIMapping | 1.3.6.1.4.1.2356.14.2.18.2 | |||
| SlcsConfigName | 1.3.6.1.4.1.2356.14.2.18.2.1 | DisplayString | RW | |
scalar · DisplayString · read-write · current Configuration Name, identify the VLAN to MSTI mapping | ||||
| SlcsConfigRevision | 1.3.6.1.4.1.2356.14.2.18.2.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Configuration Revision. range:0-65535 | ||||
| NlcsMSTIMappingVLAN | 1.3.6.1.4.1.2356.14.2.18.3 | |||
| SlcsConfigMstiName1 | 1.3.6.1.4.1.2356.14.2.18.3.1 | DisplayString | RW | |
scalar · DisplayString · read-write · current The list of VLANs mapped to the MSTI1. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. | ||||
| SlcsConfigMstiName2 | 1.3.6.1.4.1.2356.14.2.18.3.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current The list of VLANs mapped to the MSTI2. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. | ||||
| SlcsConfigMstiName3 | 1.3.6.1.4.1.2356.14.2.18.3.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current The list of VLANs mapped to the MSTI3. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. | ||||
| SlcsConfigMstiName4 | 1.3.6.1.4.1.2356.14.2.18.3.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current The list of VLANs mapped to the MSTI4. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. | ||||
| SlcsConfigMstiName5 | 1.3.6.1.4.1.2356.14.2.18.3.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current The list of VLANs mapped to the MSTI5. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. | ||||
| SlcsConfigMstiName6 | 1.3.6.1.4.1.2356.14.2.18.3.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current The list of VLANs mapped to the MSTI6. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. | ||||
| SlcsConfigMstiName7 | 1.3.6.1.4.1.2356.14.2.18.3.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current The list of VLANs mapped to the MSTI7. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. | ||||
| NlcsMSTIPriorities | 1.3.6.1.4.1.2356.14.2.18.4 | |||
| SlcsCSTIPriority | 1.3.6.1.4.1.2356.14.2.18.4.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current CSTI Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority. | ||||
| SlcsMSTI1Priority | 1.3.6.1.4.1.2356.14.2.18.4.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current MSTI1 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority. | ||||
| SlcsMSTI2Priority | 1.3.6.1.4.1.2356.14.2.18.4.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current MSTI2 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority. | ||||
| SlcsMSTI3Priority | 1.3.6.1.4.1.2356.14.2.18.4.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current MSTI3 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority. | ||||
| SlcsMSTI4Priority | 1.3.6.1.4.1.2356.14.2.18.4.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current MSTI4 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority. | ||||
| SlcsMSTI5Priority | 1.3.6.1.4.1.2356.14.2.18.4.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current MSTI5 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority. | ||||
| SlcsMSTI6Priority | 1.3.6.1.4.1.2356.14.2.18.4.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current MSTI6 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority. | ||||
| SlcsMSTI7Priority | 1.3.6.1.4.1.2356.14.2.18.4.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current MSTI7 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority. | ||||
| NlcsCISTPorts | 1.3.6.1.4.1.2356.14.2.18.5 | |||
| SlcsCISTAggregatedEnable | 1.3.6.1.4.1.2356.14.2.18.5.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current CIST Port Enable. range: 0-1. 0:disable 1:enable. | ||||
| SlcsCISTAggregatedPathCost | 1.3.6.1.4.1.2356.14.2.18.5.2 | Integer32 (0..200000000) | RW | |
scalar · Integer32 (0..200000000) · read-write · current CIST Port Path Cost. range: 0-200000000. 0 is Auto. | ||||
| SlcsCISTAggregatedPortPriority | 1.3.6.1.4.1.2356.14.2.18.5.3 | Integer32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) | RW | |
scalar · Integer32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) · read-write · current CIST Port Priority. range: 0-240, multiple of 16. | ||||
| SlcsCISTAggregatedAdminEdge | 1.3.6.1.4.1.2356.14.2.18.5.4 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current CIST Port Admin Edge. range: 0-1. 0:Non-Edge 1:Edge. | ||||
| SlcsCISTAggregatedAutoEdge | 1.3.6.1.4.1.2356.14.2.18.5.5 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current CIST Port Auto Edge. range: 0-1. 0:disable 1:enable. | ||||
| SlcsCISTAggregatedrestrictedRole | 1.3.6.1.4.1.2356.14.2.18.5.6 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current CIST Port restricted Role. range: 0-1. 0:disable 1:enable. | ||||
| SlcsCISTAggregatedrestrictedTcn | 1.3.6.1.4.1.2356.14.2.18.5.7 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current CIST Port restricted Tcn. range: 0-1. 0:disable 1:enable. | ||||
| SlcsCISTAggregatedbpduGuard | 1.3.6.1.4.1.2356.14.2.18.5.8 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current CIST Port bpdu Guard. range: 0-1. 0:disable 1:enable. | ||||
| SlcsCISTAggregatedPointToPoint | 1.3.6.1.4.1.2356.14.2.18.5.9 | Integer32 (0..2) | RW | |
scalar · Integer32 (0..2) · read-write · current CIST Port Point To Point. range: 0-2. 0:Forced True 1:Forced False. 2:Auto | ||||
| TlcsCISTPortsTable | 1.3.6.1.4.1.2356.14.2.18.5.10 | NA | ||
table · not-accessible · current CIST port table. | ||||
| RlcsCISTPortsEntry | 1.3.6.1.4.1.2356.14.2.18.5.10.1 | NA | ||
| ClcsCISTPortIndex | 1.3.6.1.4.1.2356.14.2.18.5.10.1.1 | Integer32 (1..53) | NA | |
column · Integer32 (1..53) · not-accessible · current CIST Port Index. range: 1-53. 53 is Aggregated Port Configuration. | ||||
| ClcsCISTPortEnable | 1.3.6.1.4.1.2356.14.2.18.5.10.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current CIST Port Enable. range: 0-1. 0:disable 1:enable. | ||||
| ClcsCISTPortPathCost | 1.3.6.1.4.1.2356.14.2.18.5.10.1.3 | Integer32 (0..200000000) | RW | |
column · Integer32 (0..200000000) · read-write · current CIST Port Path Cost. range: 0-200000000. 0 is Auto. | ||||
| ClcsCISTPortPortPriority | 1.3.6.1.4.1.2356.14.2.18.5.10.1.4 | Integer32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) | RW | |
column · Integer32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) · read-write · current CIST Port Priority. range: 0-240, multiple of 16. | ||||
| ClcsCISTPortAdminEdge | 1.3.6.1.4.1.2356.14.2.18.5.10.1.5 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current CIST Port Admin Edge. range: 0-1. 0:Non-Edge 1:Edge. | ||||
| ClcsCISTPortAutoEdge | 1.3.6.1.4.1.2356.14.2.18.5.10.1.6 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current CIST Port Auto Edge. range: 0-1. 0:disable 1:enable. | ||||
| ClcsCISTPortrestrictedRole | 1.3.6.1.4.1.2356.14.2.18.5.10.1.7 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current CIST Port restricted Role. range: 0-1. 0:disable 1:enable. | ||||
| ClcsCISTPortrestrictedTcn | 1.3.6.1.4.1.2356.14.2.18.5.10.1.8 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current CIST Port restricted Tcn. range: 0-1. 0:disable 1:enable. | ||||
| ClcsCISTPortbpduGuard | 1.3.6.1.4.1.2356.14.2.18.5.10.1.9 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current CIST Port bpdu Guard. range: 0-1. 0:disable 1:enable. | ||||
| ClcsCISTPortPointToPoint | 1.3.6.1.4.1.2356.14.2.18.5.10.1.10 | Integer32 (0..2) | RW | |
column · Integer32 (0..2) · read-write · current CIST Port Point To Point. range: 0-2. 0:Forced True 1:Forced False. 2:Auto | ||||
| ClcsCISTPortRootGuard | 1.3.6.1.4.1.2356.14.2.18.5.10.1.11 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current CIST Port root guard. range: 0-1. 0:disable 1:enable. | ||||
| NlcsMSTIPorts | 1.3.6.1.4.1.2356.14.2.18.6 | |||
| TlcsMSTIAggregatedPortsTable | 1.3.6.1.4.1.2356.14.2.18.6.1 | NA | ||
table · not-accessible · current A table of MSTI ports. | ||||
| RlcsMSTIAggregatedPortsEntry | 1.3.6.1.4.1.2356.14.2.18.6.1.1 | NA | ||
| ClcsMSTIAggregatedPortsMSTIndex | 1.3.6.1.4.1.2356.14.2.18.6.1.1.1 | Integer32 (1..7) | NA | |
column · Integer32 (1..7) · not-accessible · current MST index, range:1-7 | ||||
| ClcsMSTIAggregatedPortsPathCost | 1.3.6.1.4.1.2356.14.2.18.6.1.1.3 | Integer32 (0..200000000) | RW | |
column · Integer32 (0..200000000) · read-write · current MST Path Cost. range: 0-200000000. 0 is Auto. | ||||
| ClcsMSTIAggregatedPortsPortPriority | 1.3.6.1.4.1.2356.14.2.18.6.1.1.4 | Integer32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) | RW | |
column · Integer32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) · read-write · current MST Port Priority. range: 0-240, multiple of 16. | ||||
| TlcsMSTIPortsTable | 1.3.6.1.4.1.2356.14.2.18.6.2 | NA | ||
table · not-accessible · current A table of MSTI ports. | ||||
| RlcsMSTIPortsEntry | 1.3.6.1.4.1.2356.14.2.18.6.2.1 | NA | ||
row · not-accessible · current An entry in the MSTI ports Table. | ||||
| ClcsMSTIPortsMSTIndex | 1.3.6.1.4.1.2356.14.2.18.6.2.1.1 | Integer32 (1..7) | NA | |
column · Integer32 (1..7) · not-accessible · current MST index, range:1-7 | ||||
| ClcsMSTIPortsPortIndex | 1.3.6.1.4.1.2356.14.2.18.6.2.1.2 | Integer32 (1..53) | NA | |
column · Integer32 (1..53) · not-accessible · current Port index, range 1-53, 53 is Aggregated Ports Configuration. | ||||
| ClcsMSTIPortsPathCost | 1.3.6.1.4.1.2356.14.2.18.6.2.1.3 | Integer32 (0..200000000) | RW | |
column · Integer32 (0..200000000) · read-write · current MST Path Cost. range: 0-200000000. 0 is Auto. | ||||
| ClcsMSTIPortsPortPriority | 1.3.6.1.4.1.2356.14.2.18.6.2.1.4 | Integer32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) | RW | |
column · Integer32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) · read-write · current MST Port Priority. range: 0-240, multiple of 16. | ||||
| NlcsPrivateVLANs | 1.3.6.1.4.1.2356.14.2.19 | |||
| TlcsPVLANMembershipTable | 1.3.6.1.4.1.2356.14.2.19.1 | NA | ||
table · not-accessible · current A table of Private VLAN Membership. | ||||
| RlcsPVLANMembershipEntry | 1.3.6.1.4.1.2356.14.2.19.1.1 | NA | ||
| ClcsPVLANMembershipIndex | 1.3.6.1.4.1.2356.14.2.19.1.1.1 | Integer32 (1..28) | NA | |
column · Integer32 (1..28) · not-accessible · current PVLAN membership index. Range:1-28. | ||||
| ClcsPVLANID | 1.3.6.1.4.1.2356.14.2.19.1.1.2 | Integer32 (1..28) | RC | |
column · Integer32 (1..28) · read-create · current PVLAN ID. Range:1-28. | ||||
| ClcsPVLANMembers | 1.3.6.1.4.1.2356.14.2.19.1.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current PVLAN Members. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | ||||
| ClcsPVLANRowStatus | 1.3.6.1.4.1.2356.14.2.19.1.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current PVLAN Row Status. | ||||
| TlcsPVLANPortIsolationTable | 1.3.6.1.4.1.2356.14.2.19.2 | NA | ||
table · not-accessible · current A table of Private VLAN Port Isolation. | ||||
| RlcsPVLANPortIsolationEntry | 1.3.6.1.4.1.2356.14.2.19.2.1 | NA | ||
| ClcsPVLANPortIsolationIndex | 1.3.6.1.4.1.2356.14.2.19.2.1.1 | Integer32 (1..28) | NA | |
column · Integer32 (1..28) · not-accessible · current PVLAN Port Isolation Index. Range:1-28. | ||||
| ClcsPVLANPortIsolationPortMembers | 1.3.6.1.4.1.2356.14.2.19.2.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current PVLAN Port Isolation Port Members enable/disable. Range:0-1. 1:Port Isolation enable on that port. 0:Port Isolation disable on that port. | ||||
| NlcssFlow | 1.3.6.1.4.1.2356.14.2.20 | |||
| SlcssFlowVersion | 1.3.6.1.4.1.2356.14.2.20.1 | SnmpAdminString | RO | |
scalar · SnmpAdminString · read-only · current Uniquely identifies the version and implementation of this MIB. The version string must have the following structure: <MIB Version>;<Organization>;<Software Revision> where: <MIB Version> must be '1.3', the version of this MIB.
<Organization> the name of the organization responsible for the agent implementation. <Revision> the specific software build of this agent.
As an example, the string '1.3;InMon Corp.;2.1.1' indicates that this agent implements version '1.2' of the SFLOW MIB, that
it was developed by 'InMon Corp.' and that the software build is '2.1.1'.
The MIB Version will change with each revision of the SFLOW MIB.
Management entities must check the MIB Version and not attempt to manage agents with MIB Versions greater than that for which
they were designed.
Note: The sFlow Datagram Format has an independent version number which may change independently from <MIB Version>.
<MIB Version> applies to the structure and semantics of the SFLOW MIB only. | ||||
| SlcssFlowAgentAddressType | 1.3.6.1.4.1.2356.14.2.20.2 | InetAddressType | RO | |
scalar · InetAddressType · read-only · current The address type of the address associated with this agent. Only ipv4 and ipv6 types are supported. ipv4:1, ipv6:2. | ||||
| SlcssFlowAgentAddress | 1.3.6.1.4.1.2356.14.2.20.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address associated with this agent. In the case of a multi-homed agent, this should be the loopback address of the agent. The sFlowAgent address must provide SNMP connectivity to the agent. The address should be an invariant that does not change as interfaces are reconfigured, enabled, disabled, added or removed. A manager should be able to use the sFlowAgentAddress as a unique key that will identify this agent over extended periods of time so that a history can be maintained. | ||||
| TlcssFlowRcvrTable | 1.3.6.1.4.1.2356.14.2.20.4 | NA | ||
table · not-accessible · current A table of the receivers of sFlow information. | ||||
| RlcssFlowRcvrEntry | 1.3.6.1.4.1.2356.14.2.20.4.1 | NA | ||
| ClcssFlowRcvrIndex | 1.3.6.1.4.1.2356.14.2.20.4.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index into sFlowReceiverTable. | ||||
| ClcssFlowRcvrOwner | 1.3.6.1.4.1.2356.14.2.20.4.1.2 | OwnerString | RW | |
column · OwnerString · read-write · current The entity making use of this sFlowRcvrTable entry. The empty string indicates that the entry is currently unclaimed. An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed before trying to claim it. The entry is claimed by setting the owner string. The entry must be claimed before any changes can be made to other sampler objects. In order to avoid a race condition, the entity taking control of the sampler must set both the owner and a value for sFlowRcvrTimeout in the same SNMP set request. When a management entity is finished using the sampler, it should set the value of sFlowRcvrOwner back to unclaimed. The agent must restore all other entities this row to their default values when the owner is set to unclaimed. It must also free all other resources associated with this sFlowRcvrTable entry. This mechanism provides no enforcement and relies on the cooperation of management entities in order to ensure that competition for a receiver entry is fairly resolved. | ||||
| ClcssFlowRcvrTimeout | 1.3.6.1.4.1.2356.14.2.20.4.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The time (in seconds) remaining before the sampler is released and stops sampling. When set, the owner establishes control for the specified period. When read, the remaining time in the interval is returned. A management entity wanting to maintain control of the sampler is responsible for setting a new value before the old one expires. When the interval expires, the agent is responsible for restoring all other entities in this row to their default values. It must also free all other resources associated with this sFlowRcvrTable entry. | ||||
| ClcssFlowRcvrMaximumDatagramSize | 1.3.6.1.4.1.2356.14.2.20.4.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The maximum number of data bytes that can be sent in a single sample datagram. The manager should set this value to avoid fragmentation of the sFlow datagrams. | ||||
| ClcssFlowRcvrAddressType | 1.3.6.1.4.1.2356.14.2.20.4.1.5 | InetAddressType | RW | |
column · InetAddressType · read-write · current The type of sFlowRcvrCollectorAddress. | ||||
| ClcssFlowRcvrAddress | 1.3.6.1.4.1.2356.14.2.20.4.1.6 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent. | ||||
| ClcssFlowRcvrPort | 1.3.6.1.4.1.2356.14.2.20.4.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current The destination port for sFlow datagrams. | ||||
| ClcssFlowRcvrDatagramVersion | 1.3.6.1.4.1.2356.14.2.20.4.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current The version of sFlow datagrams that should be sent. When set to a value not support by the agent, the agent should adjust the value to the highest supported value less than the requested value, or return an SNMP bad value error if no such value exists. | ||||
| ClcssFlowRcvrMode | 1.3.6.1.4.1.2356.14.2.20.4.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current sFlow mode. 0:Disable 1:Enable | ||||
| TlcssFlowFsTable | 1.3.6.1.4.1.2356.14.2.20.5 | NA | ||
table · not-accessible · current A table of the flow samplers within a device. | ||||
| RlcssFlowFsEntry | 1.3.6.1.4.1.2356.14.2.20.5.1 | NA | ||
row · not-accessible · current Attributes of a flow sampler. | ||||
| ClcssFlowFsDataSource | 1.3.6.1.4.1.2356.14.2.20.5.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current sFlowDataSource for this flow sampler. | ||||
| ClcssFlowFsInstance | 1.3.6.1.4.1.2356.14.2.20.5.1.2 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current The sFlow instance for this flow sampler. | ||||
| ClcssFlowFsReceiver | 1.3.6.1.4.1.2356.14.2.20.5.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The SFlowReceiver for this flow sampler. | ||||
| ClcssFlowFsPacketSamplingRate | 1.3.6.1.4.1.2356.14.2.20.5.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The statistical sampling rate for packet sampling from this source. Set to N to sample 1/Nth of the packets in the monitored flows. An agent should choose its own algorithm to introduce variance into the sampling so that exactly every Nth packet is not counted. A sampling rate of 1 counts all packets. A sampling rate of 0 disables sampling. The agent is permitted to have minimum and maximum allowable values for the sampling rate. A minimum rate lets the agent designer set an upper bound on the overhead associated with sampling, and a maximum rate may be the result of hardware restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the sampling rate (again because of implementation considerations). When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values and has the closest achievable value. When read, the agent must return the actual sampling rate it will be using (after the adjustments previously described). The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of packets in the monitored flows. | ||||
| ClcssFlowFsMaximumHeaderSize | 1.3.6.1.4.1.2356.14.2.20.5.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current The maximum number of bytes that should be copied from a sampled packet. The agent may have an internal maximum and minimum permissible sizes. If an attempt is made to set this value outside the permissible range then the agent should adjust the value to the closest permissible value. | ||||
| ClcssFlowFsType | 1.3.6.1.4.1.2356.14.2.20.5.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Flow Sample Type. 1:Rx 2:Tx 3:All. | ||||
| TlcssFlowCpTable | 1.3.6.1.4.1.2356.14.2.20.6 | NA | ||
table · not-accessible · current A table of the counter pollers within a device. | ||||
| RlcssFlowCpEntry | 1.3.6.1.4.1.2356.14.2.20.6.1 | NA | ||
row · not-accessible · current Attributes of a counter poller. | ||||
| ClcssFlowCpDataSource | 1.3.6.1.4.1.2356.14.2.20.6.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Identifies the source of the data for the counter poller. | ||||
| ClcssFlowCpInstance | 1.3.6.1.4.1.2356.14.2.20.6.1.2 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current The sFlowInstance for this counter poller. | ||||
| ClcssFlowCpReceiver | 1.3.6.1.4.1.2356.14.2.20.6.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The SFlowReciever associated with this counter poller. | ||||
| ClcssFlowCpInterval | 1.3.6.1.4.1.2356.14.2.20.6.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval of 0 disables counter sampling. The agent is permitted to have minimum and maximum allowable values for the counter polling interval. A minimum interval lets the agent designer set an upper bound on the overhead associated with polling, and a maximum interval may be the result of implementation restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the sampling interval (again because of implementation considerations). When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values and has the closest achievable value. When read, the agent must return the actual sampling interval it will be using (after the adjustments previously described). The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of packets in the monitored flows. | ||||
| NlcsLLDP | 1.3.6.1.4.1.2356.14.2.21 | |||
| TlcsLLDPConfTable | 1.3.6.1.4.1.2356.14.2.21.1 | NA | ||
| RlcsLLDPConfEntry | 1.3.6.1.4.1.2356.14.2.21.1.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsLLDPIndex | 1.3.6.1.4.1.2356.14.2.21.1.1.1 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current LLDP configuration index. | ||||
| ClcsLLDPMode | 1.3.6.1.4.1.2356.14.2.21.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Disable 1:Tx only 2:Rx only 3:Enabled | ||||
| ClcsLLDPCDPAware | 1.3.6.1.4.1.2356.14.2.21.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Disable 1:Enable | ||||
| ClcsLLDPTrap | 1.3.6.1.4.1.2356.14.2.21.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Disable 1:Enable | ||||
| ClcsLLDPPortDescr | 1.3.6.1.4.1.2356.14.2.21.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Disable 1:Enable | ||||
| ClcsLLDPSysName | 1.3.6.1.4.1.2356.14.2.21.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Disable 1:Enable | ||||
| ClcsLLDPSysDescr | 1.3.6.1.4.1.2356.14.2.21.1.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Disable 1:Enable | ||||
| ClcsLLDPSysCapa | 1.3.6.1.4.1.2356.14.2.21.1.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Disable 1:Enable | ||||
| ClcsLLDPMgmtAddr | 1.3.6.1.4.1.2356.14.2.21.1.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current 0:Disable 1:Enable | ||||
| NlcsLLDPMEDCoordinatesLocation | 1.3.6.1.4.1.2356.14.2.21.2 | |||
| SlcsLLDPMEDLatitude | 1.3.6.1.4.1.2356.14.2.21.2.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current Latitude SHOULD be normalized to within 0-90 degrees with a maximum of 4 digits. | ||||
| SlcsLLDPMEDLatitudeDirection | 1.3.6.1.4.1.2356.14.2.21.2.3 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current 0:North 1:South | ||||
| SlcsLLDPMEDLongitude | 1.3.6.1.4.1.2356.14.2.21.2.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current Longitude SHOULD be normalized to within 0-180 degrees with a maximum of 4 digits. | ||||
| SlcsLLDPMEDLongitudeDirection | 1.3.6.1.4.1.2356.14.2.21.2.5 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current 0:East 1:West | ||||
| SlcsLLDPMEDAltitude | 1.3.6.1.4.1.2356.14.2.21.2.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current Altitude SHOULD be normalized to within -2097151.9 to 2097151.9 with a maximum of 1 digits. | ||||
| SlcsLLDPMEDAltitudeType | 1.3.6.1.4.1.2356.14.2.21.2.7 | Integer32 (1 | 2) | RW | |
scalar · Integer32 (1 | 2) · read-write · current 1:Meters 2:Floors | ||||
| SlcsLLDPMEDMapDatum | 1.3.6.1.4.1.2356.14.2.21.2.8 | Integer32 (0..2) | RW | |
scalar · Integer32 (0..2) · read-write · current The Map Datum is used for the coordinates given in these options: 1:WGS84 2:NAD83/NAVD88 3:NAD83/MLLW | ||||
| NlcsLLDPMEDCivicAddressLocation | 1.3.6.1.4.1.2356.14.2.21.4 | |||
| SlcsLLDPMEDCivicAddressLocationCountryCode | 1.3.6.1.4.1.2356.14.2.21.4.2 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationStateProvince | 1.3.6.1.4.1.2356.14.2.21.4.3 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationCounty | 1.3.6.1.4.1.2356.14.2.21.4.4 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationCity | 1.3.6.1.4.1.2356.14.2.21.4.5 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationCityDistrict | 1.3.6.1.4.1.2356.14.2.21.4.6 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationBlockNeighborhood | 1.3.6.1.4.1.2356.14.2.21.4.7 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationStreet | 1.3.6.1.4.1.2356.14.2.21.4.8 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationLeadingStreetDirection | 1.3.6.1.4.1.2356.14.2.21.4.9 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationTrailingStreetSuffix | 1.3.6.1.4.1.2356.14.2.21.4.10 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationStreetSuffix | 1.3.6.1.4.1.2356.14.2.21.4.11 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationHouseNo | 1.3.6.1.4.1.2356.14.2.21.4.12 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationHouseNoSuffix | 1.3.6.1.4.1.2356.14.2.21.4.13 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationLandmark | 1.3.6.1.4.1.2356.14.2.21.4.14 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationAdditionalLocationInfo | 1.3.6.1.4.1.2356.14.2.21.4.15 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationName | 1.3.6.1.4.1.2356.14.2.21.4.16 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationZipCode | 1.3.6.1.4.1.2356.14.2.21.4.17 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationBuilding | 1.3.6.1.4.1.2356.14.2.21.4.18 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationApartment | 1.3.6.1.4.1.2356.14.2.21.4.19 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationFloor | 1.3.6.1.4.1.2356.14.2.21.4.20 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationRoomNo | 1.3.6.1.4.1.2356.14.2.21.4.21 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationPlaceType | 1.3.6.1.4.1.2356.14.2.21.4.22 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationPostalCommunityName | 1.3.6.1.4.1.2356.14.2.21.4.23 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationPOBox | 1.3.6.1.4.1.2356.14.2.21.4.24 | DisplayString | RW | |
| SlcsLLDPMEDCivicAddressLocationAdditionalCode | 1.3.6.1.4.1.2356.14.2.21.4.25 | DisplayString | RW | |
| TlcsLLDPMEDPoliciesTable | 1.3.6.1.4.1.2356.14.2.21.5 | NA | ||
| RlcsLLDPMEDPoliciesEntry | 1.3.6.1.4.1.2356.14.2.21.5.1 | NA | ||
row · not-accessible · current | ||||
| ClcsLLDPMEDPoliciesIndex | 1.3.6.1.4.1.2356.14.2.21.5.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsLLDPMEDPoliciesPolicyID | 1.3.6.1.4.1.2356.14.2.21.5.1.2 | Integer32 | RO | |
| ClcsLLDPMEDPoliciesApplicationType | 1.3.6.1.4.1.2356.14.2.21.5.1.3 | Integer32 (1..8) | RW | |
column · Integer32 (1..8) · read-write · current 1:Voice 2:Voice Signalling 3:Guest Voice 4:Guest Voice Signalling 5:Softphone Voice 6:Video Conferencing 7:Streaming Video 8:Video Signalling | ||||
| ClcsLLDPMEDPoliciesTag | 1.3.6.1.4.1.2356.14.2.21.5.1.4 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current 0:Untagged 1:Tagged | ||||
| ClcsLLDPMEDPoliciesVLANID | 1.3.6.1.4.1.2356.14.2.21.5.1.5 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current Range:1-4094 | ||||
| ClcsLLDPMEDPoliciesL2Priority | 1.3.6.1.4.1.2356.14.2.21.5.1.6 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current Range:0-7 | ||||
| ClcsLLDPMEDPoliciesDSCP | 1.3.6.1.4.1.2356.14.2.21.5.1.7 | Integer32 (0..63) | RW | |
column · Integer32 (0..63) · read-write · current Range:0-63 | ||||
| ClcsLLDPMEDPoliciesRowStatus | 1.3.6.1.4.1.2356.14.2.21.5.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| TlcsLLDPMEDPolicyPortConfTable | 1.3.6.1.4.1.2356.14.2.21.6 | NA | ||
| RlcsLLDPMEDPolicyPortConfEntry | 1.3.6.1.4.1.2356.14.2.21.6.1 | NA | ||
row · not-accessible · current | ||||
| ClcsLLDPMEDPolicyPortConfPort | 1.3.6.1.4.1.2356.14.2.21.6.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsLLDPMEDPolicyPortConf | 1.3.6.1.4.1.2356.14.2.21.6.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current 0:Disable 1:Enable | ||||
| SlcsLLDPMEDFastStartRepeatCount | 1.3.6.1.4.1.2356.14.2.21.7 | Integer32 (1..10) | RW | |
scalar · Integer32 (1..10) · read-write · current Range:1-10 | ||||
| SlcsLLDPMEDEmergencyCallService | 1.3.6.1.4.1.2356.14.2.21.8 | DisplayString | RW | |
| NlcsUDLD | 1.3.6.1.4.1.2356.14.2.22 | |||
| TlcsUDLDPortConfigTable | 1.3.6.1.4.1.2356.14.2.22.1 | NA | ||
| RlcsUDLDPortConfigEntry | 1.3.6.1.4.1.2356.14.2.22.1.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsUDLDPort | 1.3.6.1.4.1.2356.14.2.22.1.1.1 | Integer32 (1..65535) | NA | |
| ClcsUDLDPortMode | 1.3.6.1.4.1.2356.14.2.22.1.1.2 | Integer32 (0 | 1 | 2) | RW | |
column · Integer32 (0 | 1 | 2) · read-write · current default: 0 0: disable 1: Normal 2: Aggressive | ||||
| ClcsUDLDPortMessageInterval | 1.3.6.1.4.1.2356.14.2.22.1.1.3 | Integer32 (7..90) | RW | |
column · Integer32 (7..90) · read-write · current default: 7, range: 7-90 | ||||
| TlcsUDLDPortStatusTable | 1.3.6.1.4.1.2356.14.2.22.2 | NA | ||
| RlcsUDLDPortStatusEntry | 1.3.6.1.4.1.2356.14.2.22.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsUDLDPortStatusPort | 1.3.6.1.4.1.2356.14.2.22.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Port index | ||||
| ClcsUDLDStatusAdminState | 1.3.6.1.4.1.2356.14.2.22.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current 0:disable 1:enable | ||||
| ClcsUDLDStatusDeviceIDLocal | 1.3.6.1.4.1.2356.14.2.22.2.1.3 | DisplayString | RO | |
| ClcsUDLDStatusDeviceNameLocal | 1.3.6.1.4.1.2356.14.2.22.2.1.4 | DisplayString | RO | |
| ClcsUDLDStatusBidirectionalState | 1.3.6.1.4.1.2356.14.2.22.2.1.5 | DisplayString | RO | |
| SlcsUDLDStatusPort | 1.3.6.1.4.1.2356.14.2.22.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specify port number for check neighbour status | ||||
| TlcsUDLDPortNeighbourStatusTable | 1.3.6.1.4.1.2356.14.2.22.4 | NA | ||
| RlcsUDLDPortNeighbourStatusEntry | 1.3.6.1.4.1.2356.14.2.22.4.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsUDLDNeighbourPort | 1.3.6.1.4.1.2356.14.2.22.4.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsUDLDNeighbourStatusPort | 1.3.6.1.4.1.2356.14.2.22.4.1.2 | DisplayString | RO | |
| ClcsUDLDNeighbourStatusDeviceId | 1.3.6.1.4.1.2356.14.2.22.4.1.3 | DisplayString | RO | |
| ClcsUDLDNeighbourStatusLinkStatus | 1.3.6.1.4.1.2356.14.2.22.4.1.4 | DisplayString | RO | |
| ClcsUDLDNeighbourStatusDeviceName | 1.3.6.1.4.1.2356.14.2.22.4.1.5 | DisplayString | RO | |
| NlcsEPS | 1.3.6.1.4.1.2356.14.2.23 | |||
| TlcsEPSTable | 1.3.6.1.4.1.2356.14.2.23.1 | NA | ||
table · not-accessible · current A table of EPS. | ||||
| RlcsEPSEntry | 1.3.6.1.4.1.2356.14.2.23.1.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsEPSIndex | 1.3.6.1.4.1.2356.14.2.23.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsEpsID | 1.3.6.1.4.1.2356.14.2.23.1.1.2 | Integer32 (1..100) | RC | |
column · Integer32 (1..100) · read-create · current EPS ID. Range:1-100. | ||||
| ClcsEpsDomain | 1.3.6.1.4.1.2356.14.2.23.1.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current EPS Domain. Range:0. 0:Domain is Port | ||||
| ClcsEpsArchitecture | 1.3.6.1.4.1.2356.14.2.23.1.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current EPS Architecture. Range:0-1. 0:Architecture is 1+1 1:Architecture is 1:1 | ||||
| ClcsEpsWFlow | 1.3.6.1.4.1.2356.14.2.23.1.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The working flow for the EPS. | ||||
| ClcsEpsPFlow | 1.3.6.1.4.1.2356.14.2.23.1.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The protecting flow for the EPS | ||||
| ClcsEpsWSFMEP | 1.3.6.1.4.1.2356.14.2.23.1.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current The working Signal Fail reporting MEP. | ||||
| ClcsEpsPSFMEP | 1.3.6.1.4.1.2356.14.2.23.1.1.8 | Integer32 | RC | |
column · Integer32 · read-create · current The protecting Signal Fail reporting MEP. | ||||
| ClcsEpsAPSMEP | 1.3.6.1.4.1.2356.14.2.23.1.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current The APS PDU handling MEP. | ||||
| ClcsEpsAlarm | 1.3.6.1.4.1.2356.14.2.23.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current There is an active alarm on the EPS. | ||||
| ClcsEpsRowStatus | 1.3.6.1.4.1.2356.14.2.23.1.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current EPS Row Status. | ||||
| SlcsEpsConfigInstanceEpsID | 1.3.6.1.4.1.2356.14.2.23.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specify EPS ID for table uesd. | ||||
| NlcsEPSConfigInstanceEntry | 1.3.6.1.4.1.2356.14.2.23.3 | |||
| SlcsEpsConfigInstanceProtectionType | 1.3.6.1.4.1.2356.14.2.23.3.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Range:0-1. 0:Unidirectional: EPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1. 1:Bidirectional: EPS in the two ends is selecting traffic from the same working/protecting flow. This requires APS enabled. This is mandatory for 1:1 | ||||
| SlcsEpsConfigInstanceAPS | 1.3.6.1.4.1.2356.14.2.23.3.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Range:0-1. 0:disable 1:enable The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1. | ||||
| SlcsEpsConfigInstanceRevertive | 1.3.6.1.4.1.2356.14.2.23.3.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Range:0-1. 0:disable 1:enable The revertive switching to working flow can be enabled/disabled. | ||||
| SlcsEpsConfigInstanceWTRTime | 1.3.6.1.4.1.2356.14.2.23.3.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current The Wait To Restore timing value to be used in revertive switching. Range is 1 to 720 seconds. | ||||
| SlcsEpsConfigInstanceHoldOffTime | 1.3.6.1.4.1.2356.14.2.23.3.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The timing value to be used to make persistent check on Signal Fail before switching. This is in 100 ms. and the max value is 100 (10 sec). | ||||
| SlcsEpsConfigInstanceCommand | 1.3.6.1.4.1.2356.14.2.23.3.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:None 1:Clear 2:Lock Out 3:Forced switch 4:Manual switch P 5:Manual switch W 6:Exercise 7:Freeze 8:Lock Out Local | ||||
| SlcsEpsStatusProtectionState | 1.3.6.1.4.1.2356.14.2.23.3.8 | DisplayString | RO | |
scalar · DisplayString · read-only · current EPS state according to State Transition Tables in G.8031. | ||||
| SlcsEpsStatusWorkingFlowState | 1.3.6.1.4.1.2356.14.2.23.3.9 | DisplayString | RO | |
scalar · DisplayString · read-only · current OK: State of working flow is ok SF: State of working flow is Signal Fail SD: State of working flow is Signal Degrade (for future use) | ||||
| SlcsEpsStatusProtectingFlowState | 1.3.6.1.4.1.2356.14.2.23.3.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current OK: State of protecting flow is ok SF: State of protecting flow is Signal Fail SD: State of protecting flow is Signal Degrade (for future use) | ||||
| SlcsEpsStatusTransmittedApsRequest | 1.3.6.1.4.1.2356.14.2.23.3.11 | DisplayString | RO | |
scalar · DisplayString · read-only · current The transmitted APS according to State Transition Tables in G.8031. | ||||
| SlcsEpsStatusTransmittedApsReSignal | 1.3.6.1.4.1.2356.14.2.23.3.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The transmitted APS according to State Transition Tables in G.8031. | ||||
| SlcsEpsStatusTransmittedApsBrSignal | 1.3.6.1.4.1.2356.14.2.23.3.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The transmitted APS according to State Transition Tables in G.8031. | ||||
| SlcsEpsStatusReceivedApsRequest | 1.3.6.1.4.1.2356.14.2.23.3.14 | DisplayString | RO | |
scalar · DisplayString · read-only · current The received APS according to State Transition Tables in G.8031. | ||||
| SlcsEpsStatusReceivedApsReSignal | 1.3.6.1.4.1.2356.14.2.23.3.15 | Integer32 | RO | |
scalar · Integer32 · read-only · current The received APS according to State Transition Tables in G.8031. | ||||
| SlcsEpsStatusReceivedApsBrSignal | 1.3.6.1.4.1.2356.14.2.23.3.16 | Integer32 | RO | |
scalar · Integer32 · read-only · current The received APS according to State Transition Tables in G.8031. | ||||
| SlcsEpsStatusArchitectureMismatch | 1.3.6.1.4.1.2356.14.2.23.3.17 | DisplayString | RO | |
scalar · DisplayString · read-only · current The architecture indicated in the received APS does not match the locally configured. | ||||
| SlcsEpsStatusAPSOnWorking | 1.3.6.1.4.1.2356.14.2.23.3.18 | DisplayString | RO | |
scalar · DisplayString · read-only · current APS is received on the working flow. | ||||
| SlcsEpsStatusSwitchingIncomplete | 1.3.6.1.4.1.2356.14.2.23.3.19 | DisplayString | RO | |
scalar · DisplayString · read-only · current Traffic is not selected from the same flow instance in the two ends. | ||||
| SlcsEpsStatusNoApsReceived | 1.3.6.1.4.1.2356.14.2.23.3.20 | DisplayString | RO | |
scalar · DisplayString · read-only · current APS PDU is not received from the other end. | ||||
| NlcsERPS | 1.3.6.1.4.1.2356.14.2.24 | |||
| TlcsERPSTable | 1.3.6.1.4.1.2356.14.2.24.1 | NA | ||
table · not-accessible · current A table of ERPS. | ||||
| RlcsERPSEntry | 1.3.6.1.4.1.2356.14.2.24.1.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsErpsIndex | 1.3.6.1.4.1.2356.14.2.24.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsErpsID | 1.3.6.1.4.1.2356.14.2.24.1.1.2 | Integer32 (1..64) | RC | |
column · Integer32 (1..64) · read-create · current ERPS ID. Range:1-64. | ||||
| ClcsErpsPort0 | 1.3.6.1.4.1.2356.14.2.24.1.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current This will create a Port 0 of the switch in the ring. | ||||
| ClcsErpsPort1 | 1.3.6.1.4.1.2356.14.2.24.1.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current This will create Port 1 of the switch in the Ring. As interconnected sub-ring will have only one ring port, Port 1 is configured as 0 for interconnected sub-ring. 0 in this field indicates that no Port 1 is associated with this instance | ||||
| ClcsErpsPort0APSMEP | 1.3.6.1.4.1.2356.14.2.24.1.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The Port 0 APS PDU handling MEP. Range: 1-100. | ||||
| ClcsErpsPort1APSMEP | 1.3.6.1.4.1.2356.14.2.24.1.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The Port 1 APS PDU handling MEP. Range: 1-100. | ||||
| ClcsErpsPort0SFMEP | 1.3.6.1.4.1.2356.14.2.24.1.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current The Port 0 Signal Fail reporting MEP. Range: 1-100. | ||||
| ClcsErpsPort1SFMEP | 1.3.6.1.4.1.2356.14.2.24.1.1.8 | Integer32 | RC | |
column · Integer32 · read-create · current The Port 1 Signal Fail reporting MEP. Range: 1-100. | ||||
| ClcsErpsRingType | 1.3.6.1.4.1.2356.14.2.24.1.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current Type of Protecting ring. It can be either major ring or sub-ring. 0:Major 1:Sub | ||||
| ClcsErpsInterconnectedNode | 1.3.6.1.4.1.2356.14.2.24.1.1.10 | Integer32 | RC | |
column · Integer32 · read-create · current Interconnected Node indicates that the ring instance is interconnected. 0: not interconnected 1: interconnected | ||||
| ClcsErpsVirtualChannel | 1.3.6.1.4.1.2356.14.2.24.1.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current 1: indicates it is a sub-ring with virtual channel. 0: indicates, sub-ring doesn't have virtual channel. | ||||
| ClcsErpsMajorRingID | 1.3.6.1.4.1.2356.14.2.24.1.1.12 | Integer32 | RC | |
column · Integer32 · read-create · current Major ring group ID for the interconnected sub-ring. Range:1-64 | ||||
| ClcsErpsAlarm | 1.3.6.1.4.1.2356.14.2.24.1.1.13 | Integer32 | RC | |
column · Integer32 · read-create · current There is an active alarm on the ERPS. | ||||
| ClcsErpsRowStatus | 1.3.6.1.4.1.2356.14.2.24.1.1.14 | RowStatus | RC | |
column · RowStatus · read-create · current ERPS Row Status. | ||||
| SlcsErpsConfigInstanceErpsID | 1.3.6.1.4.1.2356.14.2.24.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specify ERPS ID for ERPSConfigInstanceEntry and ErpsConfigInstanceVLANConfigTable uesd. | ||||
| NlcsERPSConfigInstanceEntry | 1.3.6.1.4.1.2356.14.2.24.3 | |||
| SlcsErpsConfigInstanceConfigured | 1.3.6.1.4.1.2356.14.2.24.3.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current Down: This ERPS is only created and has not yet been configured - is not active. Up: This ERPS is configured - is active. | ||||
| SlcsErpsConfigInstanceGuardTime | 1.3.6.1.4.1.2356.14.2.24.3.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The period of the guard timer can be configured in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms. Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages. | ||||
| SlcsErpsConfigInstanceWTRTime | 1.3.6.1.4.1.2356.14.2.24.3.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current The Wait To Restore timing value to be used in revertive switching. The period of the WTR time can be configured by the operator in 1 minute steps between 5 and 12 minutes with a default value of 5 minutes. | ||||
| SlcsErpsConfigInstanceHoldOffTime | 1.3.6.1.4.1.2356.14.2.24.3.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current The timing value to be used to make persistent check on Signal Fail before switching. The range of the hold off timer is 0 to 10 seconds in steps of 100 ms | ||||
| SlcsErpsConfigInstanceVersion | 1.3.6.1.4.1.2356.14.2.24.3.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current ERPS Protocol Version - v1 or v2 1:v1 2:v2 | ||||
| SlcsErpsConfigInstanceRevertive | 1.3.6.1.4.1.2356.14.2.24.3.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current 1:Revertive mode 0:Non-Revertive mode | ||||
| SlcsErpsConfigInstanceRPLRole | 1.3.6.1.4.1.2356.14.2.24.3.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current It can be either RPL owner or RPL Neighbor. 0:None 1:RPL owner 2:RPL Neighbor Please set RPLPort first. | ||||
| SlcsErpsConfigInstanceRPLPort | 1.3.6.1.4.1.2356.14.2.24.3.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current This allows to select the east port or west port as the RPL block. 0:None 1:Port0 2:Port1 Please set RPLRole after specify RPLPort. | ||||
| SlcsErpsConfigInstanceClear | 1.3.6.1.4.1.2356.14.2.24.3.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current If the owner has to be changed, then the clear check box allows to clear the RPL owner for that ERPS ring. 0: no clear 1: clear | ||||
| SlcsErpsConfigInstanceTopologyChange | 1.3.6.1.4.1.2356.14.2.24.3.11 | Integer32 | RW | |
scalar · Integer32 · read-write · current 1: indicates that the topology changes in the sub-ring are propagated in the major ring. 0: indicates that the topology changes in the sub-ring are not propagated in the major ring. | ||||
| SlcsErpsConfigInstanceCommand | 1.3.6.1.4.1.2356.14.2.24.3.12 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:None 1:Manual Switch 2:Forced Switch 3:Clear Please set InstancePort first. | ||||
| SlcsErpsConfigInstancePort | 1.3.6.1.4.1.2356.14.2.24.3.13 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:None 1:Port0 2:Port1 Please set InstanceCommand after specify InstancePort. | ||||
| SlcsErpsStatusProtectionState | 1.3.6.1.4.1.2356.14.2.24.3.14 | DisplayString | RO | |
scalar · DisplayString · read-only · current ERPS state according to State Transition Tables in G.8032. | ||||
| SlcsErpsStatusPort0 | 1.3.6.1.4.1.2356.14.2.24.3.15 | DisplayString | RO | |
scalar · DisplayString · read-only · current OK: State of East port is ok SF: State of East port is Signal Fail | ||||
| SlcsErpsStatusPort1 | 1.3.6.1.4.1.2356.14.2.24.3.16 | DisplayString | RO | |
scalar · DisplayString · read-only · current OK: State of West port is ok SF: State of West port is Signal Fail | ||||
| SlcsErpsStatusTransmitAPS | 1.3.6.1.4.1.2356.14.2.24.3.17 | DisplayString | RO | |
scalar · DisplayString · read-only · current The transmitted APS according to State Transition Tables in G.8032. | ||||
| SlcsErpsStatusPort0ReceiveAPS | 1.3.6.1.4.1.2356.14.2.24.3.18 | DisplayString | RO | |
scalar · DisplayString · read-only · current The received APS on Port 0 according to State Transition Tables in G.8032. | ||||
| SlcsErpsStatusPort1ReceiveAPS | 1.3.6.1.4.1.2356.14.2.24.3.19 | DisplayString | RO | |
scalar · DisplayString · read-only · current The received APS on Port 1 according to State Transition Tables in G.8032. | ||||
| SlcsErpsStatusWTRRemaining | 1.3.6.1.4.1.2356.14.2.24.3.20 | Integer32 | RO | |
scalar · Integer32 · read-only · current Remaining WTR timeout in milliseconds. | ||||
| SlcsErpsStatusRPLUnblocked | 1.3.6.1.4.1.2356.14.2.24.3.21 | DisplayString | RO | |
scalar · DisplayString · read-only · current APS is received on the working flow. | ||||
| SlcsErpsStatusNoAPSReceived | 1.3.6.1.4.1.2356.14.2.24.3.22 | DisplayString | RO | |
scalar · DisplayString · read-only · current RAPS PDU is not received from the other end. | ||||
| SlcsErpsStatusPort0BlockStatus | 1.3.6.1.4.1.2356.14.2.24.3.23 | DisplayString | RO | |
scalar · DisplayString · read-only · current Block status for Port 0 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel. | ||||
| SlcsErpsStatusPort1BlockStatus | 1.3.6.1.4.1.2356.14.2.24.3.24 | DisplayString | RO | |
scalar · DisplayString · read-only · current Block status for Port 1 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel. | ||||
| SlcsErpsStatusFOPAlarm | 1.3.6.1.4.1.2356.14.2.24.3.25 | DisplayString | RO | |
scalar · DisplayString · read-only · current Failure of Protocol Defect(FOP) status: FOP is not detected FOP is detected | ||||
| TlcsErpsConfigInstanceVLANConfigTable | 1.3.6.1.4.1.2356.14.2.24.4 | NA | ||
table · not-accessible · current A table of ERPS VLANConfig. | ||||
| RlcsErpsConfigInstanceVLANConfigEntry | 1.3.6.1.4.1.2356.14.2.24.4.1 | NA | ||
row · not-accessible · current | ||||
| ClcsErpsConfigInstanceVLANConfigIndex | 1.3.6.1.4.1.2356.14.2.24.4.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsErpsConfigInstanceVLANConfigVLANID | 1.3.6.1.4.1.2356.14.2.24.4.1.2 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current ERPS VLAN Config ID. Range:1-4094. | ||||
| ClcsErpsConfigInstanceVLANConfigRowStatus | 1.3.6.1.4.1.2356.14.2.24.4.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current ERPS VLAN Config Row Status. | ||||
| NlcsVLANTranslation | 1.3.6.1.4.1.2356.14.2.25 | |||
| TlcsVLANTranslationPortTable | 1.3.6.1.4.1.2356.14.2.25.1 | NA | ||
table · not-accessible · current A table of VLANTranslationPort. | ||||
| RlcsVLANTranslationPortEntry | 1.3.6.1.4.1.2356.14.2.25.1.1 | NA | ||
row · not-accessible · current An entry in the VLANTranslationPort table. | ||||
| ClcsVLANTranslationPortIndex | 1.3.6.1.4.1.2356.14.2.25.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current VLANTranslationPort index. | ||||
| ClcsVLANTranslationPortDefault | 1.3.6.1.4.1.2356.14.2.25.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Set the switch port to use the default VLAN Translation Group. 1:set 0:not set | ||||
| ClcsVLANTranslationPortGroupID | 1.3.6.1.4.1.2356.14.2.25.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The VLAN Translation mappings are organized into Groups, identified by the Group ID. | ||||
| TlcsVLANTranslationMappingTable | 1.3.6.1.4.1.2356.14.2.25.2 | NA | ||
table · not-accessible · current A table of VLANTranslationMapping. | ||||
| RlcsVLANTranslationMappingEntry | 1.3.6.1.4.1.2356.14.2.25.2.1 | NA | ||
row · not-accessible · current An entry in the VLANTranslationMapping table. | ||||
| ClcsVLANTranslationMappingIndex | 1.3.6.1.4.1.2356.14.2.25.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current VLANTranslationMapping index. | ||||
| ClcsVLANTranslationMappingGroupID | 1.3.6.1.4.1.2356.14.2.25.2.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The VLAN Translation mappings are organized into Groups, identified by the Group ID. | ||||
| ClcsVLANTranslationMappingVID | 1.3.6.1.4.1.2356.14.2.25.2.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current Range:1-4094 | ||||
| ClcsVLANTranslationMappingTVID | 1.3.6.1.4.1.2356.14.2.25.2.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current Range:1-4094 | ||||
| ClcsVLANTranslationMappingRowStatus | 1.3.6.1.4.1.2356.14.2.25.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current VLANTranslationMapping Row Status. | ||||
| NlcsMEP | 1.3.6.1.4.1.2356.14.2.26 | |||
| TlcsMEPTable | 1.3.6.1.4.1.2356.14.2.26.1 | NA | ||
table · not-accessible · current A table of MEP. | ||||
| RlcsMEPEntry | 1.3.6.1.4.1.2356.14.2.26.1.1 | NA | ||
| ClcsMEPIndex | 1.3.6.1.4.1.2356.14.2.26.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current MEP Table index. | ||||
| ClcsMepInstance | 1.3.6.1.4.1.2356.14.2.26.1.1.2 | Integer32 | RC | |
| ClcsMepDomain | 1.3.6.1.4.1.2356.14.2.26.1.1.3 | Integer32 | RC | |
| ClcsMepMode | 1.3.6.1.4.1.2356.14.2.26.1.1.4 | Integer32 | RC | |
| ClcsMepDirection | 1.3.6.1.4.1.2356.14.2.26.1.1.5 | Integer32 | RC | |
| ClcsMepResidencePort | 1.3.6.1.4.1.2356.14.2.26.1.1.6 | Integer32 | RC | |
| ClcsMepLevel | 1.3.6.1.4.1.2356.14.2.26.1.1.7 | Integer32 | RC | |
| ClcsMepFlowInstance | 1.3.6.1.4.1.2356.14.2.26.1.1.8 | Integer32 | RC | |
| ClcsMepTaggedVID | 1.3.6.1.4.1.2356.14.2.26.1.1.9 | Integer32 | RC | |
| ClcsMepEPSInstance | 1.3.6.1.4.1.2356.14.2.26.1.1.10 | DisplayString | RO | |
| ClcsMepThisMAC | 1.3.6.1.4.1.2356.14.2.26.1.1.11 | DisplayString | RO | |
| ClcsMepAlarm | 1.3.6.1.4.1.2356.14.2.26.1.1.12 | DisplayString | RO | |
| ClcsMepRowStatus | 1.3.6.1.4.1.2356.14.2.26.1.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current MEP Row Status. | ||||
| SlcsMepInstanceID | 1.3.6.1.4.1.2356.14.2.26.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specify MEP Instance ID for the following item and table uesd. | ||||
| NlcsMepInstanceConfEntry | 1.3.6.1.4.1.2356.14.2.26.3 | |||
| SlcsMepInstanceConfLevel | 1.3.6.1.4.1.2356.14.2.26.3.2 | Integer32 | RW | |
| SlcsMepInstanceConfFormat | 1.3.6.1.4.1.2356.14.2.26.3.3 | Integer32 | RW | |
| SlcsMepInstanceConfDomainName | 1.3.6.1.4.1.2356.14.2.26.3.4 | DisplayString | RW | |
| SlcsMepInstanceConfMEGid | 1.3.6.1.4.1.2356.14.2.26.3.5 | DisplayString | RW | |
| SlcsMepInstanceConfMEPid | 1.3.6.1.4.1.2356.14.2.26.3.6 | Integer32 | RW | |
| SlcsMepInstanceConfTaggedVID | 1.3.6.1.4.1.2356.14.2.26.3.7 | Integer32 | RW | |
| SlcsMepInstanceConfSyslog | 1.3.6.1.4.1.2356.14.2.26.3.8 | Integer32 | RW | |
| SlcsMepInstanceConfcLevel | 1.3.6.1.4.1.2356.14.2.26.3.9 | DisplayString | RO | |
| SlcsMepInstanceConfcMEG | 1.3.6.1.4.1.2356.14.2.26.3.10 | DisplayString | RO | |
| SlcsMepInstanceConfcMEP | 1.3.6.1.4.1.2356.14.2.26.3.11 | DisplayString | RO | |
| SlcsMepInstanceConfcAIS | 1.3.6.1.4.1.2356.14.2.26.3.12 | DisplayString | RO | |
| SlcsMepInstanceConfcLCK | 1.3.6.1.4.1.2356.14.2.26.3.13 | DisplayString | RO | |
| SlcsMepInstanceConfcLoop | 1.3.6.1.4.1.2356.14.2.26.3.14 | DisplayString | RO | |
| SlcsMepInstanceConfcConfig | 1.3.6.1.4.1.2356.14.2.26.3.15 | DisplayString | RO | |
| SlcsMepInstanceConfcDEG | 1.3.6.1.4.1.2356.14.2.26.3.16 | DisplayString | RO | |
| SlcsMepInstanceConfcSSF | 1.3.6.1.4.1.2356.14.2.26.3.17 | DisplayString | RO | |
| SlcsMepInstanceConfaBLK | 1.3.6.1.4.1.2356.14.2.26.3.18 | DisplayString | RO | |
| SlcsMepInstanceConfaTSD | 1.3.6.1.4.1.2356.14.2.26.3.19 | DisplayString | RO | |
| SlcsMepInstanceConfaTSF | 1.3.6.1.4.1.2356.14.2.26.3.20 | DisplayString | RO | |
| TlcsPeerMepConfTable | 1.3.6.1.4.1.2356.14.2.26.4 | NA | ||
table · not-accessible · current A table of MEP. | ||||
| RlcsPeerMepConfEntry | 1.3.6.1.4.1.2356.14.2.26.4.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsPeerMepConfIndex | 1.3.6.1.4.1.2356.14.2.26.4.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsPeerMepConfPeerMEPID | 1.3.6.1.4.1.2356.14.2.26.4.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Peer MEP ID | ||||
| ClcsPeerMepConfUnicastPeerMAC | 1.3.6.1.4.1.2356.14.2.26.4.1.3 | DisplayString | RC | |
| ClcsPeerMepConfcLOC | 1.3.6.1.4.1.2356.14.2.26.4.1.4 | DisplayString | RC | |
| ClcsPeerMepConfcRDI | 1.3.6.1.4.1.2356.14.2.26.4.1.5 | DisplayString | RC | |
| ClcsPeerMepConfcPeriod | 1.3.6.1.4.1.2356.14.2.26.4.1.6 | DisplayString | RC | |
| ClcsPeerMepConfcPriority | 1.3.6.1.4.1.2356.14.2.26.4.1.7 | DisplayString | RC | |
| ClcsPeerMepConfRowStatus | 1.3.6.1.4.1.2356.14.2.26.4.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Peer Mep Conf Row Status. | ||||
| NlcsFunctionalConf | 1.3.6.1.4.1.2356.14.2.26.5 | |||
| SlcsFunctionalConfContinuityCheckEnable | 1.3.6.1.4.1.2356.14.2.26.5.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:disable 1:enable | ||||
| SlcsFunctionalConfContinuityCheckPriority | 1.3.6.1.4.1.2356.14.2.26.5.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-7 | ||||
| SlcsFunctionalConfContinuityCheckFrameRate | 1.3.6.1.4.1.2356.14.2.26.5.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:1-7 1: 300 f/sec 2: 100 f/sec 3: 10 f/sec 4: 1 f/sec 5: 6 f/min 6: 1 f/min 7: 6 f/hour | ||||
| SlcsFunctionalConfContinuityCheckTLV | 1.3.6.1.4.1.2356.14.2.26.5.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:disable 1:enable | ||||
| SlcsFunctionalConfAPSProtocolEnable | 1.3.6.1.4.1.2356.14.2.26.5.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:disable 1:enable | ||||
| SlcsFunctionalConfAPSProtocolPriority | 1.3.6.1.4.1.2356.14.2.26.5.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-7 | ||||
| SlcsFunctionalConfAPSProtocolCast | 1.3.6.1.4.1.2356.14.2.26.5.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0: Unicast destination address 1: Multicast destination address | ||||
| SlcsFunctionalConfAPSProtocolType | 1.3.6.1.4.1.2356.14.2.26.5.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current 1: Linear protection APS 2: Ring protection APS | ||||
| SlcsFunctionalConfAPSProtocolLastOctet | 1.3.6.1.4.1.2356.14.2.26.5.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-255 | ||||
| NlcsTLVConf | 1.3.6.1.4.1.2356.14.2.26.6 | |||
| SlcsTLVConfOUIFirst | 1.3.6.1.4.1.2356.14.2.26.6.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-255 | ||||
| SlcsTLVConfOUISecond | 1.3.6.1.4.1.2356.14.2.26.6.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-255 | ||||
| SlcsTLVConfOUIThird | 1.3.6.1.4.1.2356.14.2.26.6.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-255 | ||||
| SlcsTLVConfSubType | 1.3.6.1.4.1.2356.14.2.26.6.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-255 | ||||
| SlcsTLVConfValue | 1.3.6.1.4.1.2356.14.2.26.6.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-255 | ||||
| TlcsTLVConfStateTable | 1.3.6.1.4.1.2356.14.2.26.7 | NA | ||
table · not-accessible · current TLV Conf State Table | ||||
| RlcsTLVConfStateEntry | 1.3.6.1.4.1.2356.14.2.26.7.1 | NA | ||
| ClcsTLVConfStateIndex | 1.3.6.1.4.1.2356.14.2.26.7.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsTLVConfStatePeerMEPID | 1.3.6.1.4.1.2356.14.2.26.7.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Peer MEP ID | ||||
| ClcsTLVConfStateCCOrganizationSpecificOUIFirst | 1.3.6.1.4.1.2356.14.2.26.7.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The last received first value in the OUI field. | ||||
| ClcsTLVConfStateCCOrganizationSpecificOUISecond | 1.3.6.1.4.1.2356.14.2.26.7.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The last received second value in the OS TLV OUI field. | ||||
| ClcsTLVConfStateCCOrganizationSpecificOUIThird | 1.3.6.1.4.1.2356.14.2.26.7.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The last received third value in the OS TLV OUI field. | ||||
| ClcsTLVConfStateCCOrganizationSpecificSubType | 1.3.6.1.4.1.2356.14.2.26.7.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The last received value in the OS TLV Sub-Type field. | ||||
| ClcsTLVConfStateCCOrganizationSpecificValue | 1.3.6.1.4.1.2356.14.2.26.7.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The last received value in the OS TLV Value field. | ||||
| ClcsTLVConfStateCCOrganizationSpecificLastRX | 1.3.6.1.4.1.2356.14.2.26.7.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current OS TLV was received in the last received CCM PDU. | ||||
| ClcsTLVConfStateCCPortStatusValue | 1.3.6.1.4.1.2356.14.2.26.7.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The last received value in the PS TLV Value field. | ||||
| ClcsTLVConfStateCCPortStatusLastRX | 1.3.6.1.4.1.2356.14.2.26.7.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current PS TLV was received in the last received CCM PDU. | ||||
| ClcsTLVConfStateCCInterfaceStatusValue | 1.3.6.1.4.1.2356.14.2.26.7.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The last received value in the IS TLV Value field. | ||||
| ClcsTLVConfStateCCInterfaceStatusLastRX | 1.3.6.1.4.1.2356.14.2.26.7.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current IS TLV was received in the last received CCM PDU. | ||||
| SlcsLinkStateTracking | 1.3.6.1.4.1.2356.14.2.26.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:disable 1:enable | ||||
| NlcsFaultManagement | 1.3.6.1.4.1.2356.14.2.26.9 | |||
| SlcsFaultMgmtLoopBackConfEnable | 1.3.6.1.4.1.2356.14.2.26.9.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:disable 1:enable | ||||
| SlcsFaultMgmtLoopBackConfDEI | 1.3.6.1.4.1.2356.14.2.26.9.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:disable 1:enable | ||||
| SlcsFaultMgmtLoopBackConfPriority | 1.3.6.1.4.1.2356.14.2.26.9.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-7 | ||||
| SlcsFaultMgmtLoopBackConfCast | 1.3.6.1.4.1.2356.14.2.26.9.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:Unicast destination address 1:Multicast destination address | ||||
| SlcsFaultMgmtLoopBackConfPeerMEP | 1.3.6.1.4.1.2356.14.2.26.9.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current This is only used if the 'Unicast MAC' is configured to all zero. The LBM unicast MAC will be taken from the 'Unicast Peer MAC' configuration of this peer. | ||||
| SlcsFaultMgmtLoopBackConfUnicastMAC | 1.3.6.1.4.1.2356.14.2.26.9.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current This is only used if NOT configured to all zero. This will be used as the LBM PDU unicast MAC. This is the only way to configure Loop Back to-wards a MIP. | ||||
| SlcsFaultMgmtLoopBackConfToSend | 1.3.6.1.4.1.2356.14.2.26.9.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The number of LBM PDU to send in one loop test. The value 0 indicate infinite transmission (test behaviour). This is HW based LBM/LBR and Requires VOE. | ||||
| SlcsFaultMgmtLoopBackConfSize | 1.3.6.1.4.1.2356.14.2.26.9.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current The LBM frame size. | ||||
| SlcsFaultMgmtLoopBackConfInterval | 1.3.6.1.4.1.2356.14.2.26.9.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current The interval between transmitting LBM PDU. | ||||
| NlcsFaultManagementState | 1.3.6.1.4.1.2356.14.2.26.10 | |||
| SlcsFaultMgmtStateTransactionID | 1.3.6.1.4.1.2356.14.2.26.10.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The transaction id of the first LBM transmitted. For each LBM transmitted the transaction id in the PDU is incremented. | ||||
| SlcsFaultMgmtStateTransmitted | 1.3.6.1.4.1.2356.14.2.26.10.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of LBM PDU transmitted. | ||||
| TlcsFaultMgmtStateTable | 1.3.6.1.4.1.2356.14.2.26.10.3 | NA | ||
| RlcsFaultMgmtStateEntry | 1.3.6.1.4.1.2356.14.2.26.10.3.1 | NA | ||
row · not-accessible · current | ||||
| ClcsFaultMgmtStateIndex | 1.3.6.1.4.1.2356.14.2.26.10.3.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsFaultMgmtStateReplyMAC | 1.3.6.1.4.1.2356.14.2.26.10.3.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The MAC of the replying MEP/MIP. In case of multi-cast LBM, replies can be received from all peer MEP in the group. This MAC is not shown in case of 'To Send' == 0. | ||||
| ClcsFaultMgmtStateReceived | 1.3.6.1.4.1.2356.14.2.26.10.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of LBR PDU received from this 'Reply MAC'. | ||||
| ClcsFaultMgmtStateOutOfOrder | 1.3.6.1.4.1.2356.14.2.26.10.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The number of LBR PDU received from this 'Reply MAC' with incorrect 'Transaction ID'. | ||||
| NlcsFaultMgmtTestSignal | 1.3.6.1.4.1.2356.14.2.26.11 | |||
| SlcsFaultMgmtTestSignalTx | 1.3.6.1.4.1.2356.14.2.26.11.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Test Signal based on transmitting TST PDU can be enabled/disabled. 0:disable 1:enable | ||||
| SlcsFaultMgmtTestSignalRx | 1.3.6.1.4.1.2356.14.2.26.11.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Test Signal based on transmitting TST PDU can be enabled/disabled. 0:disable 1:enable | ||||
| SlcsFaultMgmtTestSignalDEI | 1.3.6.1.4.1.2356.14.2.26.11.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current The DEI to be inserted as PCP bits in TAG (if any). 0:disable 1:enable | ||||
| SlcsFaultMgmtTestSignalPriority | 1.3.6.1.4.1.2356.14.2.26.11.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current The priority to be inserted as PCP bits in TAG (if any). Range:0-7 | ||||
| SlcsFaultMgmtTestSignalPeerMEP | 1.3.6.1.4.1.2356.14.2.26.11.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The TST frame destination MAC will be taken from the 'Unicast Peer MAC' configuration of this peer. | ||||
| SlcsFaultMgmtTestSignalRate | 1.3.6.1.4.1.2356.14.2.26.11.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The TST frame transmission bit rate - in Mega bits pr. second. Limit is 400 Mbps. This is the bit rate of a standard frame without any encapsulation. If 1 Mbps rate is selected in a EVC MEP, the added tag will give a higher bitrate on the wire. | ||||
| SlcsFaultMgmtTestSignalSize | 1.3.6.1.4.1.2356.14.2.26.11.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The TST frame size. This is entered as the wanted size (in bytes) of a un-tagged frame containing TST OAM PDU - including CRC (four bytes). | ||||
| SlcsFaultMgmtTestSignalPattern | 1.3.6.1.4.1.2356.14.2.26.11.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current The 'empty' TST PDU has the size of 12 bytes. In order to achieve the configured frame size a data TLV will be added with a pattern. 0:All Zero 1:All One 2:10101010 | ||||
| SlcsFaultMgmtTestSignalSequenceNumber | 1.3.6.1.4.1.2356.14.2.26.11.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:disable 1:enable | ||||
| NlcsFaultMgmtTestSignalState | 1.3.6.1.4.1.2356.14.2.26.12 | |||
| SlcsFaultMgmtTestSignalStateTXFrameCount | 1.3.6.1.4.1.2356.14.2.26.12.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of transmitted TST frames since last 'Clear'. | ||||
| SlcsFaultMgmtTestSignalStateRXFrameCount | 1.3.6.1.4.1.2356.14.2.26.12.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of received TST frames since last 'Clear'. | ||||
| SlcsFaultMgmtTestSignalStateRXRate | 1.3.6.1.4.1.2356.14.2.26.12.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The current received TST frame bit rate in Kbps. This is calculated on a 1 s. basis, starting when first TST frame is received after 'Clear'. The frame size used for this calculation is the first received after 'Clear' | ||||
| SlcsFaultMgmtTestSignalStateTestTime | 1.3.6.1.4.1.2356.14.2.26.12.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of seconds passed since first TST frame received after last 'Clear'. | ||||
| SlcsFaultMgmtTestSignalStateClear | 1.3.6.1.4.1.2356.14.2.26.12.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current This will clear all Test Signal State. Transmission of TST frame will be restarted. Calculation of 'Rx frame count', 'RX rate' and 'Test time' will be started when receiving first TST frame. | ||||
| NlcsFaultMgmtClientConfigFlow | 1.3.6.1.4.1.2356.14.2.26.13 | |||
| TlcsFaultMgmtClientConfigFlowTable | 1.3.6.1.4.1.2356.14.2.26.13.1 | NA | ||
| RlcsFaultMgmtClientConfigFlowEntry | 1.3.6.1.4.1.2356.14.2.26.13.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsFaultMgmtClientConfigFlowIndex | 1.3.6.1.4.1.2356.14.2.26.13.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsFaultMgmtClientConfigFlowDomain | 1.3.6.1.4.1.2356.14.2.26.13.1.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The domain of the client layer flow. Ranfew:0-6 0:Port 1:EVC 2:VLAN 3:MPLS_LINK 4:MPLS_TUNNEL 5:MPLS_PW 6:MPLS_LSP | ||||
| ClcsFaultMgmtClientConfigFlowInstance | 1.3.6.1.4.1.2356.14.2.26.13.1.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current Client layer flow instance numbers. | ||||
| ClcsFaultMgmtClientConfigFlowLevel | 1.3.6.1.4.1.2356.14.2.26.13.1.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current Client layer level - AIS and LCK PDU transmitted in this client layer flow will be on this level. | ||||
| ClcsFaultMgmtClientConfigFlowAISprio | 1.3.6.1.4.1.2356.14.2.26.13.1.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The priority to be used when transmitting AIS in each client flow. Priority resulting in highest possible PCP can be selected. Range:0-7. 255 indicate highest possible is requested | ||||
| ClcsFaultMgmtClientConfigFlowLCKprio | 1.3.6.1.4.1.2356.14.2.26.13.1.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The priority to be used when transmitting LCK in each client flow. Priority resulting in highest possible PCP can be selected. Range:0-7. 255 indicate highest possible is requested | ||||
| ClcsFaultMgmtClientConfigFlowRowStatus | 1.3.6.1.4.1.2356.14.2.26.13.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current FaultMgmtClientConfigFlow Row Status. | ||||
| NlcsFaultMgmtAISLOCK | 1.3.6.1.4.1.2356.14.2.26.14 | |||
| SlcsFaultMgmtAISEnable | 1.3.6.1.4.1.2356.14.2.26.14.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Insertion of AIS signal (AIS PDU transmission) in client layer flows, can be enable/disabled. 0:disable 1:enable | ||||
| SlcsFaultMgmtAISFrameRate | 1.3.6.1.4.1.2356.14.2.26.14.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Selecting the frame rate of AIS PDU. This is the inverse of transmission period as described in Y.1731. 1: 300 frames per second 2: 100 frames per second 3: 10 frames per second 4: 1 frames per second 5: 6 frames per minute 6: 1 frames per minute 7: 6 frames per hour | ||||
| SlcsFaultMgmtAISProtection | 1.3.6.1.4.1.2356.14.2.26.14.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Selecting this means that the first 3 AIS PDU is transmitted as fast as possible - in case of using this for protection in the end point. 0:disable 1:enable | ||||
| SlcsFaultMgmtLOCKEnable | 1.3.6.1.4.1.2356.14.2.26.14.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current Insertion of LOCK signal (LCK PDU transmission) in client layer flows, can be enable/disabled. 0:disable 1:enable | ||||
| SlcsFaultMgmtLOCKFrameRate | 1.3.6.1.4.1.2356.14.2.26.14.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current Selecting the frame rate of LCK PDU. This is the inverse of transmission period as described in Y.1731. 1: 300 frames per second 2: 100 frames per second 3: 10 frames per second 4: 1 frames per second 5: 6 frames per minute 6: 1 frames per minute 7: 6 frames per hour | ||||
| NlcsPerformanceMonitor | 1.3.6.1.4.1.2356.14.2.26.15 | |||
| SlcsDataSetEnable | 1.3.6.1.4.1.2356.14.2.26.15.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current When enabled this MEP instance will contribute to the 'PM Data Set' gathered by the PM Session. 0:disable 1:enable | ||||
| SlcsLossMeasurementEnable | 1.3.6.1.4.1.2356.14.2.26.15.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Loss Measurement based on transmitting/receiving CCM or LMM/LMR PDU can be enabled/disabled - see 'Ended'. This is only valid with one Peer MEP configured. 0:disable 1:enable | ||||
| SlcsLossMeasurementPriority | 1.3.6.1.4.1.2356.14.2.26.15.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current The priority to be inserted as PCP bits in TAG (if any). In case of enable of Continuity Check and Loss Measurement both implemented on SW based CCM, 'Priority' has to be the same. range:0-7 | ||||
| SlcsLossMeasurementFrameRate | 1.3.6.1.4.1.2356.14.2.26.15.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current 1: 300 frames per second 2: 100 frames per second 3: 10 frames per second 4: 1 frames per second 5: 6 frames per minute 6: 1 frames per minute 7: 6 frames per hour | ||||
| SlcsLossMeasurementCast | 1.3.6.1.4.1.2356.14.2.26.15.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0: Unicast destination address 1: Multicast destination address | ||||
| SlcsLossMeasurementEnded | 1.3.6.1.4.1.2356.14.2.26.15.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0: Single ended LM based on LMM/LMR or DM based on DMM/DMR 1: Dual ended LM based on CCM or DM based on 1DM | ||||
| SlcsLossMeasurementFLRInterval | 1.3.6.1.4.1.2356.14.2.26.15.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current This is the interval in seconds where the Frame Loss Ratio is calculated. | ||||
| SlcsLossMeasurementLossThreshold | 1.3.6.1.4.1.2356.14.2.26.15.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current Far end loss threshold count is incremented if a loss measurement is above this threshold. | ||||
| SlcsLossMeasurementStateTx | 1.3.6.1.4.1.2356.14.2.26.15.10 | Integer32 | RO | |
| SlcsLossMeasurementStateRx | 1.3.6.1.4.1.2356.14.2.26.15.11 | Integer32 | RO | |
| SlcsLossMeasurementStateNearEndLossCount | 1.3.6.1.4.1.2356.14.2.26.15.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated near end frame loss count - since last 'clear'. | ||||
| SlcsLossMeasurementStateFarEndLossCount | 1.3.6.1.4.1.2356.14.2.26.15.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated far end frame loss count - since last 'clear'. | ||||
| SlcsLossMeasurementStateNearEndLossRatio | 1.3.6.1.4.1.2356.14.2.26.15.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The near end frame loss ratio calculated based on the near end frame loss count and far end frame transmitted - in the latest 'FLR Interval'. The result is given in percent. | ||||
| SlcsLossMeasurementStateFarEndLossRatio | 1.3.6.1.4.1.2356.14.2.26.15.15 | Integer32 | RO | |
scalar · Integer32 · read-only · current The far end frame loss ratio calculated based on the far end frame loss count and near end frame transmitted - in the latest 'FLR Interval'. The result is given in percent. | ||||
| SlcsLossMeasurementStateClear | 1.3.6.1.4.1.2356.14.2.26.15.16 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set of this check and save will clear the accumulated counters and restart ratio calculation. | ||||
| SlcsLossMeasurementAvailabilityEnable | 1.3.6.1.4.1.2356.14.2.26.15.17 | Integer32 | RW | |
scalar · Integer32 · read-write · current Enable/disable of loss measurement availability. 0:disable 1:enable | ||||
| SlcsLossMeasurementAvailabilityInterval | 1.3.6.1.4.1.2356.14.2.26.15.18 | Integer32 | RW | |
scalar · Integer32 · read-write · current Availability interval - number of measurements with same availability in order to change availability state. | ||||
| SlcsLossMeasurementAvailabilityFLRThreshold | 1.3.6.1.4.1.2356.14.2.26.15.19 | Integer32 | RW | |
scalar · Integer32 · read-write · current Availability frame loss ratio threshold in per mille. | ||||
| SlcsLossMeasurementAvailabilityMaintenance | 1.3.6.1.4.1.2356.14.2.26.15.20 | Integer32 | RW | |
scalar · Integer32 · read-write · current Enable/disable of loss measurement availability maintenance. | ||||
| SlcsLossMeasurementAvailabilityStateNearAvailabilityCount | 1.3.6.1.4.1.2356.14.2.26.15.21 | Integer32 | RO | |
scalar · Integer32 · read-only · current Near end availability count. | ||||
| SlcsLossMeasurementAvailabilityStateFarAvailabilityCount | 1.3.6.1.4.1.2356.14.2.26.15.22 | Integer32 | RO | |
scalar · Integer32 · read-only · current Far end availability count. | ||||
| SlcsLossMeasurementAvailabilityStateNearUnavailabilityCount | 1.3.6.1.4.1.2356.14.2.26.15.23 | Integer32 | RO | |
scalar · Integer32 · read-only · current Near end unavailability count. | ||||
| SlcsLossMeasurementAvailabilityStateFarUnavailabilityCount | 1.3.6.1.4.1.2356.14.2.26.15.24 | Integer32 | RO | |
scalar · Integer32 · read-only · current Far end unavailability count. | ||||
| SlcsLossMeasurementAvailabilityStateNearState | 1.3.6.1.4.1.2356.14.2.26.15.25 | Integer32 | RO | |
scalar · Integer32 · read-only · current Near end availability state. | ||||
| SlcsLossMeasurementAvailabilityStateFarState | 1.3.6.1.4.1.2356.14.2.26.15.26 | Integer32 | RO | |
scalar · Integer32 · read-only · current Far end availability state. | ||||
| SlcsLossMeasurementHighLossIntervalEnable | 1.3.6.1.4.1.2356.14.2.26.15.27 | Integer32 | RW | |
scalar · Integer32 · read-write · current Enable/disable of loss measurement high loss interval. 0:disable 1:enable | ||||
| SlcsLossMeasurementHighLossIntervalFLRThreshold | 1.3.6.1.4.1.2356.14.2.26.15.28 | Integer32 | RW | |
scalar · Integer32 · read-write · current High Loss Interval frame loss ratio threshold in per mille. | ||||
| SlcsLossMeasurementHighLossIntervalConsecutiveInterval | 1.3.6.1.4.1.2356.14.2.26.15.29 | Integer32 | RW | |
scalar · Integer32 · read-write · current High Loss Interval consecutive interval (number of measurements). | ||||
| SlcsLossMeasurementHighLossIntervalStateNearCount | 1.3.6.1.4.1.2356.14.2.26.15.30 | Integer32 | RO | |
scalar · Integer32 · read-only · current Near end high loss interval count (number of measurements where availability state is available and FLR is above high loss interval FLR threshold. | ||||
| SlcsLossMeasurementHighLossIntervalStateFarCount | 1.3.6.1.4.1.2356.14.2.26.15.31 | Integer32 | RO | |
scalar · Integer32 · read-only · current Far end high loss interval count (number of measurements where availability state is available and FLR is above high loss interval FLR threshold. | ||||
| SlcsLossMeasurementHighLossIntervalStateNearConsecutiveCount | 1.3.6.1.4.1.2356.14.2.26.15.32 | Integer32 | RO | |
scalar · Integer32 · read-only · current Near end high loss interval consecutive count. | ||||
| SlcsLossMeasurementHighLossIntervalStateFarConsecutiveCount | 1.3.6.1.4.1.2356.14.2.26.15.33 | Integer32 | RO | |
scalar · Integer32 · read-only · current Far end high loss interval consecutive count. | ||||
| SlcsLossMeasurementSignalDegradeEnable | 1.3.6.1.4.1.2356.14.2.26.15.34 | Integer32 | RW | |
scalar · Integer32 · read-write · current Enable/disable of loss measurement signal degrade. 0:disable 1:enable | ||||
| SlcsLossMeasurementSignalDegradeTXMinimum | 1.3.6.1.4.1.2356.14.2.26.15.35 | Integer32 | RW | |
scalar · Integer32 · read-write · current Minimum number of frames that must be transmitted in a measurement before frame loss ratio is tested against loss ratio threshold. | ||||
| SlcsLossMeasurementSignalDegradeFLRThreshold | 1.3.6.1.4.1.2356.14.2.26.15.36 | Integer32 | RW | |
scalar · Integer32 · read-write · current Signal Degraded frame loss ratio threshold in per mille. | ||||
| SlcsLossMeasurementSignalDegradeBadThreshold | 1.3.6.1.4.1.2356.14.2.26.15.37 | Integer32 | RW | |
scalar · Integer32 · read-write · current Number of consecutive bad interval measurements required to set degrade state. | ||||
| SlcsLossMeasurementSignalDegradeGoodThreshold | 1.3.6.1.4.1.2356.14.2.26.15.38 | Integer32 | RW | |
scalar · Integer32 · read-write · current Number of consecutive good interval measurements required to clear degrade state. | ||||
| SlcsDelayMeasurementEnable | 1.3.6.1.4.1.2356.14.2.26.15.39 | Integer32 | RW | |
scalar · Integer32 · read-write · current Delay Measurement based on transmitting 1DM/DMM PDU can be enabled/disabled. Delay Measurement based on receiving and handling 1DM/DMR PDU is always enabled. 0:disable 1:enable | ||||
| SlcsDelayMeasurementPriority | 1.3.6.1.4.1.2356.14.2.26.15.40 | Integer32 | RW | |
scalar · Integer32 · read-write · current The priority to be inserted as PCP bits in TAG (if any). Range:0-7 | ||||
| SlcsDelayMeasurementCast | 1.3.6.1.4.1.2356.14.2.26.15.41 | Integer32 | RW | |
scalar · Integer32 · read-write · current Selection of 1DM/DMM PDU transmitted unicast or multicast. The unicast MAC will be configured through 'Peer MEP'. 0: Unicast destination address 1: Multicast destination address | ||||
| SlcsDelayMeasurementPeerMEP | 1.3.6.1.4.1.2356.14.2.26.15.42 | Integer32 | RW | |
scalar · Integer32 · read-write · current This is only used if the 'Cast' is configured to Uni. The 1DM/DMR unicast MAC will be taken from the 'Unicast Peer MAC' configuration of this peer. | ||||
| SlcsDelayMeasurementEnded | 1.3.6.1.4.1.2356.14.2.26.15.43 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:One-Way: One-Way Delay Measurement implemented on 1DM. 1:Two-Way: Two-Way Delay Measurement implemented on DMM/DMR. | ||||
| SlcsDelayMeasurementTxMode | 1.3.6.1.4.1.2356.14.2.26.15.44 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:Standardize: Y.1731 standardize way to transmit 1DM/DMR. 1:Proprietary: Vitesse proprietary way with follow-up packets to transmit 1DM/DMR. | ||||
| SlcsDelayMeasurementCalc | 1.3.6.1.4.1.2356.14.2.26.15.45 | Integer32 | RW | |
scalar · Integer32 · read-write · current This is only used if the 'Way' is configured to Two-way.
0:Round trip: The frame delay calculated by the transmitting and receiving timestamps of initiators.
Frame Delay = RxTimeb-TxTimeStampf
1:Flow: The frame delay calculated by the transmitting and receiving timestamps of initiators and remotes.
Frame Delay = (RxTimeb-TxTimeStampf)-(TxTimeStampb-RxTimeStampf) | ||||
| SlcsDelayMeasurementGap | 1.3.6.1.4.1.2356.14.2.26.15.46 | Integer32 | RW | |
scalar · Integer32 · read-write · current The gap between transmitting 1DM/DMM PDU in 10ms. The range is 10 to 65535. | ||||
| SlcsDelayMeasurementCount | 1.3.6.1.4.1.2356.14.2.26.15.47 | Integer32 | RW | |
scalar · Integer32 · read-write · current The number of last records to calculate. The range is 10 to 2000. | ||||
| SlcsDelayMeasurementUnit | 1.3.6.1.4.1.2356.14.2.26.15.48 | Integer32 | RW | |
scalar · Integer32 · read-write · current The time resolution. 0:us 1:ns | ||||
| SlcsDelayMeasurementD2forD1 | 1.3.6.1.4.1.2356.14.2.26.15.49 | Integer32 | RW | |
scalar · Integer32 · read-write · current Enable to use DMM/DMR packet to calculate one-way DM. 0:disable 1:enable | ||||
| SlcsDelayMeasurementCounterOverflowAction | 1.3.6.1.4.1.2356.14.2.26.15.50 | Integer32 | RW | |
scalar · Integer32 · read-write · current The action to counter when overflow happens. 0: Keep:When internal total delay counter overflow, DM is disabled automatically 1: Reset:When internal total delay counter overflow, counter is reset and DM continues running | ||||
| SlcsDelayMeasurementStateOnewayTx | 1.3.6.1.4.1.2356.14.2.26.15.51 | DisplayString | RO | |
scalar · DisplayString · read-only · current The accumulated transmit count - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayRx | 1.3.6.1.4.1.2356.14.2.26.15.52 | DisplayString | RO | |
scalar · DisplayString · read-only · current The accumulated receive count - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayRxTimeout | 1.3.6.1.4.1.2356.14.2.26.15.53 | DisplayString | RO | |
scalar · DisplayString · read-only · current The accumulated receive timeout count for two-way only - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayRxError | 1.3.6.1.4.1.2356.14.2.26.15.54 | DisplayString | RO | |
scalar · DisplayString · read-only · current The accumulated receive error count - since last 'clear'. This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time. | ||||
| SlcsDelayMeasurementStateOnewayAvDelayTot | 1.3.6.1.4.1.2356.14.2.26.15.55 | DisplayString | RO | |
scalar · DisplayString · read-only · current The average total delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayAvDelaylastN | 1.3.6.1.4.1.2356.14.2.26.15.56 | DisplayString | RO | |
scalar · DisplayString · read-only · current The average delay of the last n packets - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayDelayMin | 1.3.6.1.4.1.2356.14.2.26.15.57 | DisplayString | RO | |
scalar · DisplayString · read-only · current The minimum delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayDelayMax | 1.3.6.1.4.1.2356.14.2.26.15.58 | DisplayString | RO | |
scalar · DisplayString · read-only · current The maximum delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayAvDelayVarTot | 1.3.6.1.4.1.2356.14.2.26.15.59 | DisplayString | RO | |
scalar · DisplayString · read-only · current The average total delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayAvDelayVarlastN | 1.3.6.1.4.1.2356.14.2.26.15.60 | DisplayString | RO | |
scalar · DisplayString · read-only · current The average delay variation of the last n packets - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayDelayVarMin | 1.3.6.1.4.1.2356.14.2.26.15.61 | DisplayString | RO | |
scalar · DisplayString · read-only · current The minimum delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayDelayVarMax | 1.3.6.1.4.1.2356.14.2.26.15.62 | DisplayString | RO | |
scalar · DisplayString · read-only · current The maximum delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateOnewayOverflow | 1.3.6.1.4.1.2356.14.2.26.15.63 | DisplayString | RO | |
scalar · DisplayString · read-only · current The number of counter overflow - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNTx | 1.3.6.1.4.1.2356.14.2.26.15.64 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated transmit count - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNRx | 1.3.6.1.4.1.2356.14.2.26.15.65 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive count - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNRxTimeout | 1.3.6.1.4.1.2356.14.2.26.15.66 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive timeout count for two-way only - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNRxError | 1.3.6.1.4.1.2356.14.2.26.15.67 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive error count - since last 'clear'. This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time. | ||||
| SlcsDelayMeasurementStateFtoNAvDelayTot | 1.3.6.1.4.1.2356.14.2.26.15.68 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average total delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNAvDelaylastN | 1.3.6.1.4.1.2356.14.2.26.15.69 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average delay of the last n packets - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNDelayMin | 1.3.6.1.4.1.2356.14.2.26.15.70 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNDelayMax | 1.3.6.1.4.1.2356.14.2.26.15.71 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNAvDelayVarTot | 1.3.6.1.4.1.2356.14.2.26.15.72 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average total delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNAvDelayVarlastN | 1.3.6.1.4.1.2356.14.2.26.15.73 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average delay variation of the last n packets - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNDelayVarMin | 1.3.6.1.4.1.2356.14.2.26.15.74 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNDelayVarMax | 1.3.6.1.4.1.2356.14.2.26.15.75 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateFtoNOverflow | 1.3.6.1.4.1.2356.14.2.26.15.76 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of counter overflow - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFTx | 1.3.6.1.4.1.2356.14.2.26.15.77 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated transmit count - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFRx | 1.3.6.1.4.1.2356.14.2.26.15.78 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive count - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFRxTimeout | 1.3.6.1.4.1.2356.14.2.26.15.79 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive timeout count for two-way only - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFRxError | 1.3.6.1.4.1.2356.14.2.26.15.80 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive error count - since last 'clear'. This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time. | ||||
| SlcsDelayMeasurementStateNtoFAvDelayTot | 1.3.6.1.4.1.2356.14.2.26.15.81 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average total delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFAvDelaylastN | 1.3.6.1.4.1.2356.14.2.26.15.82 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average delay of the last n packets - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFDelayMin | 1.3.6.1.4.1.2356.14.2.26.15.83 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFDelayMax | 1.3.6.1.4.1.2356.14.2.26.15.84 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFAvDelayVarTot | 1.3.6.1.4.1.2356.14.2.26.15.85 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average total delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFAvDelayVarlastN | 1.3.6.1.4.1.2356.14.2.26.15.86 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average delay variation of the last n packets - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFDelayVarMin | 1.3.6.1.4.1.2356.14.2.26.15.87 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFDelayVarMax | 1.3.6.1.4.1.2356.14.2.26.15.88 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateNtoFOverflow | 1.3.6.1.4.1.2356.14.2.26.15.89 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of counter overflow - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayTx | 1.3.6.1.4.1.2356.14.2.26.15.90 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated transmit count - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayRx | 1.3.6.1.4.1.2356.14.2.26.15.91 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive count - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayRxTimeout | 1.3.6.1.4.1.2356.14.2.26.15.92 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive timeout count for two-way only - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayRxError | 1.3.6.1.4.1.2356.14.2.26.15.93 | Integer32 | RO | |
scalar · Integer32 · read-only · current The accumulated receive error count - since last 'clear'. This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time. | ||||
| SlcsDelayMeasurementStateTwowayAvDelayTot | 1.3.6.1.4.1.2356.14.2.26.15.94 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average total delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayAvDelaylastN | 1.3.6.1.4.1.2356.14.2.26.15.95 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average delay of the last n packets - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayDelayMin | 1.3.6.1.4.1.2356.14.2.26.15.96 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayDelayMax | 1.3.6.1.4.1.2356.14.2.26.15.97 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum delay - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayAvDelayVarTot | 1.3.6.1.4.1.2356.14.2.26.15.98 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average total delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayAvDelayVarlastN | 1.3.6.1.4.1.2356.14.2.26.15.99 | Integer32 | RO | |
scalar · Integer32 · read-only · current The average delay variation of the last n packets - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayDelayVarMin | 1.3.6.1.4.1.2356.14.2.26.15.100 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayDelayVarMax | 1.3.6.1.4.1.2356.14.2.26.15.101 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum delay variation - since last 'clear'. | ||||
| SlcsDelayMeasurementStateTwowayOverflow | 1.3.6.1.4.1.2356.14.2.26.15.102 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of counter overflow - since last 'clear'. | ||||
| SlcsDelayMeasurementStateClear | 1.3.6.1.4.1.2356.14.2.26.15.103 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set of this check and save will clear the accumulated counters. 1:clear | ||||
| SlcsDelayMeasurementBinsMeasurementBinsforFD | 1.3.6.1.4.1.2356.14.2.26.15.104 | Integer32 | RW | |
scalar · Integer32 · read-write · current Configurable number of Frame Delay Measurement Bins per Measurement Interval. range: 2-10 | ||||
| SlcsDelayMeasurementBinsMeasurementBinsforIFDV | 1.3.6.1.4.1.2356.14.2.26.15.105 | Integer32 | RW | |
scalar · Integer32 · read-write · current Configurable number of Inter-Frame Delay Variation Measurement Bins per Measurement Interval. range: 2-10 | ||||
| SlcsDelayMeasurementBinsMeasurementThreshold | 1.3.6.1.4.1.2356.14.2.26.15.106 | Integer32 | RW | |
scalar · Integer32 · read-write · current Configurable the Measurement Threshold for each Measurement Bin. | ||||
| TlcsPerformanceMonitorDelayMeasurementBinsforFDTable | 1.3.6.1.4.1.2356.14.2.26.16 | NA | ||
| RlcsPerformanceMonitorDelayMeasurementBinsforFDEntry | 1.3.6.1.4.1.2356.14.2.26.16.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPerformanceMonitorDelayMeasurementBinsforFDIndex | 1.3.6.1.4.1.2356.14.2.26.16.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsPerformanceMonitorDelayMeasurementBinsforFDOneway | 1.3.6.1.4.1.2356.14.2.26.16.1.2 | Integer32 | RO | |
| ClcsPerformanceMonitorDelayMeasurementBinsforFDFtoN | 1.3.6.1.4.1.2356.14.2.26.16.1.3 | Integer32 | RO | |
| ClcsPerformanceMonitorDelayMeasurementBinsforFDNtoF | 1.3.6.1.4.1.2356.14.2.26.16.1.4 | Integer32 | RO | |
| ClcsPerformanceMonitorDelayMeasurementBinsforFDTwoway | 1.3.6.1.4.1.2356.14.2.26.16.1.5 | Integer32 | RO | |
| TlcsPerformanceMonitorDelayMeasurementBinsforIFDVTable | 1.3.6.1.4.1.2356.14.2.26.17 | NA | ||
| RlcsPerformanceMonitorDelayMeasurementBinsforIFDVEntry | 1.3.6.1.4.1.2356.14.2.26.17.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPerformanceMonitorDelayMeasurementBinsforIFDVIndex | 1.3.6.1.4.1.2356.14.2.26.17.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsPerformanceMonitorDelayMeasurementBinsforIFDVOneway | 1.3.6.1.4.1.2356.14.2.26.17.1.2 | Integer32 | RO | |
| ClcsPerformanceMonitorDelayMeasurementBinsforIFDVFtoN | 1.3.6.1.4.1.2356.14.2.26.17.1.3 | Integer32 | RO | |
| ClcsPerformanceMonitorDelayMeasurementBinsforIFDVNtoF | 1.3.6.1.4.1.2356.14.2.26.17.1.4 | Integer32 | RO | |
| ClcsPerformanceMonitorDelayMeasurementBinsforIFDVTwoway | 1.3.6.1.4.1.2356.14.2.26.17.1.5 | Integer32 | RO | |
| NlcsPTP | 1.3.6.1.4.1.2356.14.2.28 | |||
| SlcsPTPExternalEnable | 1.3.6.1.4.1.2356.14.2.28.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current This Selection box will allow you to configure the External Clock output. The following values are possible: 1. True : Enable the external clock output 0. False : Disable the external clock output | ||||
| SlcsPTPAdjustMethod | 1.3.6.1.4.1.2356.14.2.28.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) | ||||
| SlcsPTPClockFrequency | 1.3.6.1.4.1.2356.14.2.28.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current This will allow to set the Clock Frequency. The possible range of values are 1 - 25000000 (1 - 25MHz) | ||||
| TlcsPTPClockConfTable | 1.3.6.1.4.1.2356.14.2.28.5 | NA | ||
table · not-accessible · current A table of PTP Clock Conf. | ||||
| RlcsPTPClockConfEntry | 1.3.6.1.4.1.2356.14.2.28.5.1 | NA | ||
| ClcsPTPClockConfIndex | 1.3.6.1.4.1.2356.14.2.28.5.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current PTP Clock Conf index. | ||||
| ClcsPTPClockConfClockInstance | 1.3.6.1.4.1.2356.14.2.28.5.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Indicates the Instance of a particular Clock Instance [0..3]. | ||||
| ClcsPTPClockConfDeviceType | 1.3.6.1.4.1.2356.14.2.28.5.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current Indicates the Type of the Clock Instance. There are five Device Types. 0: Inactive - passive clock instance 1: Ord-Bound - clock's Device Type is Ordinary-Boundary Clock. 2: P2p Transp - clock's Device Type is Peer to Peer Transparent Clock. 3: E2e Transp - clock's Device Type is End to End Transparent Clock. 4: Master Only - clock's Device Type is Master Only. 5: Slave Only - clock's Device Type is Slave Only. 6: Boundary Clock frontend clock instance, only 1-step, 1-way is supported. | ||||
| ClcsPTPClockConfProfile | 1.3.6.1.4.1.2356.14.2.28.5.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current 0:No profile 1:1588 2:G8265.1 3:G8275.1 | ||||
| ClcsPTPClockConfRowStatus | 1.3.6.1.4.1.2356.14.2.28.5.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current PTP Clock Conf Row Status. | ||||
| SlcsPTPClockInstance | 1.3.6.1.4.1.2356.14.2.28.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specify the PTP clock instance for the following item used [0..3]. | ||||
| NlcsPTPClockConfAndStatus | 1.3.6.1.4.1.2356.14.2.28.7 | |||
| SlcsPTPClockConfEntryClockInstance | 1.3.6.1.4.1.2356.14.2.28.7.2 | Integer32 | RO | |
| SlcsPTPClockConfEntryDeviceType | 1.3.6.1.4.1.2356.14.2.28.7.3 | DisplayString | RO | |
| SlcsPTPClockConfEntryProfile | 1.3.6.1.4.1.2356.14.2.28.7.4 | DisplayString | RO | |
| SlcsPTPClockConfEntryApplyProfileDefaults | 1.3.6.1.4.1.2356.14.2.28.7.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current -1:n/a 0:normal state 1:apply profile default | ||||
| SlcsPTPClockConfEntryPTPTime | 1.3.6.1.4.1.2356.14.2.28.7.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current Shows the actual PTP time with nanosecond resolution. | ||||
| SlcsPTPClockConfEntryClockAdjustmentMethod | 1.3.6.1.4.1.2356.14.2.28.7.7 | DisplayString | RO | |
scalar · DisplayString · read-only · current Shows the actual clock adjustment method. The method depends on the available hardware. | ||||
| SlcsPTPClockConfEntrySynchronizeToSystemClock | 1.3.6.1.4.1.2356.14.2.28.7.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current Activate this button to synchronize the System Clock to PTP Time. 1:Synchronize to system clock. | ||||
| SlcsPTPClockConfEntryClockCurrentDataSetstpRm | 1.3.6.1.4.1.2356.14.2.28.7.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current Steps Removed : It is the number of PTP clocks traversed from the grandmaster to the local slave clock. | ||||
| SlcsPTPClockConfEntryClockCurrentDataSetOffsetFromMaster | 1.3.6.1.4.1.2356.14.2.28.7.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current Time difference between the master clock and the local slave clock, measured in ns. | ||||
| SlcsPTPClockConfEntryClockCurrentDataSetMeanPathDelay | 1.3.6.1.4.1.2356.14.2.28.7.11 | DisplayString | RO | |
scalar · DisplayString · read-only · current The mean propagation time for the link between the master and the local slave. | ||||
| SlcsPTPClockConfEntryClockCurrentDataSetSlavePort | 1.3.6.1.4.1.2356.14.2.28.7.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current Shows which port is in slave mode. The value is 0 if no ports are in slave mode. | ||||
| SlcsPTPClockConfEntryClockCurrentDataSetSlaveState | 1.3.6.1.4.1.2356.14.2.28.7.13 | DisplayString | RO | |
scalar · DisplayString · read-only · current Shows synchronization state of the slave. | ||||
| SlcsPTPClockConfEntryClockCurrentDataSetHoldover | 1.3.6.1.4.1.2356.14.2.28.7.14 | DisplayString | RO | |
scalar · DisplayString · read-only · current After the slave has been in Locked mode during the stabilization period, this value shows the actual clock offset between the freerun and the actual holdover frequency, the value is shown in parts pr billion (ppb). During the stabilization period, the value is shown as N.A. The stabilization period is 60 sec as default, it can be changed from the CLI interface. | ||||
| SlcsPTPClockConfEntryClockParentDataSetParentPortID | 1.3.6.1.4.1.2356.14.2.28.7.15 | DisplayString | RO | |
scalar · DisplayString · read-only · current Clock identity for the parent clock, if the local clock is not a slave, the value is the clocks own id. | ||||
| SlcsPTPClockConfEntryClockParentDataSetPort | 1.3.6.1.4.1.2356.14.2.28.7.16 | Integer32 | RO | |
scalar · Integer32 · read-only · current Port Id for the parent master port | ||||
| SlcsPTPClockConfEntryClockParentDataSetPStat | 1.3.6.1.4.1.2356.14.2.28.7.17 | DisplayString | RO | |
scalar · DisplayString · read-only · current Parents Stats (always false). | ||||
| SlcsPTPClockConfEntryClockParentDataSetVar | 1.3.6.1.4.1.2356.14.2.28.7.18 | Integer32 | RO | |
scalar · Integer32 · read-only · current It is observed parent offset scaled log variance | ||||
| SlcsPTPClockConfEntryClockParentDataSetRate | 1.3.6.1.4.1.2356.14.2.28.7.19 | Integer32 | RO | |
scalar · Integer32 · read-only · current Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset compared to the master. (unit = ns per s). | ||||
| SlcsPTPClockConfEntryClockParentDataSetGrandMasterID | 1.3.6.1.4.1.2356.14.2.28.7.20 | DisplayString | RO | |
scalar · DisplayString · read-only · current Clock identity for the grand master clock, if the local clock is not a slave, the value is the clocks own id. | ||||
| SlcsPTPClockConfEntryClockParentDataSetGrandMasterClockQuality | 1.3.6.1.4.1.2356.14.2.28.7.21 | DisplayString | RO | |
scalar · DisplayString · read-only · current The clock quality announced by the grand master (See description of Clock Default DataSet:Clock Quality) | ||||
| SlcsPTPClockConfEntryClockParentDataSetPri1 | 1.3.6.1.4.1.2356.14.2.28.7.22 | Integer32 | RO | |
scalar · Integer32 · read-only · current Clock priority 1 announced by the grand master | ||||
| SlcsPTPClockConfEntryClockParentDataSetPri2 | 1.3.6.1.4.1.2356.14.2.28.7.23 | Integer32 | RO | |
scalar · Integer32 · read-only · current Clock priority 2 announced by the grand master. | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetClockID | 1.3.6.1.4.1.2356.14.2.28.7.24 | Integer32 | RO | |
scalar · Integer32 · read-only · current An internal instance id (0..3) | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetDeviceType | 1.3.6.1.4.1.2356.14.2.28.7.25 | DisplayString | RO | |
scalar · DisplayString · read-only · current Indicates the Type of the Clock Instance. There are five Device Types. 1. Ord-Bound - Clock's Device Type is Ordinary-Boundary Clock. 2. P2p Transp - Clock's Device Type is Peer to Peer Transparent Clock. 3. E2e Transp - Clock's Device Type is End to End Transparent Clock. 4. Master Only - Clock's Device Type is Master Only. 5. Slave Only - Clock's Device Type is Slave Only. | ||||
| SlcsPTPClockConfEntryClockDefaultDataSet2StepFlag | 1.3.6.1.4.1.2356.14.2.28.7.26 | Integer32 | RW | |
scalar · Integer32 · read-write · current True if two-step Sync events and Pdelay_Resp events are used 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetPorts | 1.3.6.1.4.1.2356.14.2.28.7.27 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of physical ports in the node | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetClockIdentity | 1.3.6.1.4.1.2356.14.2.28.7.28 | DisplayString | RO | |
scalar · DisplayString · read-only · current It shows unique clock identifier | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetDom | 1.3.6.1.4.1.2356.14.2.28.7.29 | Integer32 | RW | |
scalar · Integer32 · read-write · current Clock domain [0..127]. | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetClockQuality | 1.3.6.1.4.1.2356.14.2.28.7.30 | DisplayString | RO | |
scalar · DisplayString · read-only · current The clock quality is determined by the system, and holds 3 parts: Clock Class, Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588. The Clock Accuracy values are defined in IEEE1588 table 6 (Currently the clock Accuracy is set to 'Unknown' as default). | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetPri1 | 1.3.6.1.4.1.2356.14.2.28.7.31 | Integer32 | RW | |
scalar · Integer32 · read-write · current Clock priority 1 [0..255] used by the BMC master select algorithm. | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetPri2 | 1.3.6.1.4.1.2356.14.2.28.7.32 | Integer32 | RW | |
scalar · Integer32 · read-write · current Clock priority 2 [0..255] used by the BMC master select algorithm. | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetProtocol | 1.3.6.1.4.1.2356.14.2.28.7.33 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:Ethernet 1:Ethernet Mixed 2:IP4Multi 3:IP4Mixed 4:IP4Uni 5:OAM | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetOneWay | 1.3.6.1.4.1.2356.14.2.28.7.34 | Integer32 | RW | |
scalar · Integer32 · read-write · current If true, one way measurements are used. This parameter applies only to a slave. In one-way mode no delay measurements are performed, i.e. this is applicable only if frequency synchronization is needed. The master always responds to delay requests. 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetVLANTagEnable | 1.3.6.1.4.1.2356.14.2.28.7.35 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN Tag Enable parameter is ignored, because the tagging is controlled by the VLAN configuration. 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetVID | 1.3.6.1.4.1.2356.14.2.28.7.36 | Integer32 | RW | |
scalar · Integer32 · read-write · current TVLAN Identifier used for tagging the VLAN packets. range:1-4094 | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetPCP | 1.3.6.1.4.1.2356.14.2.28.7.37 | Integer32 | RW | |
scalar · Integer32 · read-write · current Priority Code Point value used for PTP frames. range:0-7 | ||||
| SlcsPTPClockConfEntryClockDefaultDataSetDSCP | 1.3.6.1.4.1.2356.14.2.28.7.38 | Integer32 | RW | |
| SlcsPTPClockConfEntryClockTimePropertiesDataSetUtcOffset | 1.3.6.1.4.1.2356.14.2.28.7.39 | Integer32 | RW | |
scalar · Integer32 · read-write · current range: 0-10000 | ||||
| SlcsPTPClockConfEntryClockTimePropertiesDataSetValid | 1.3.6.1.4.1.2356.14.2.28.7.40 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockTimePropertiesDataSetLeap59 | 1.3.6.1.4.1.2356.14.2.28.7.41 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockTimePropertiesDataSetLeap61 | 1.3.6.1.4.1.2356.14.2.28.7.42 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockTimePropertiesDataSetTimeTrac | 1.3.6.1.4.1.2356.14.2.28.7.43 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockTimePropertiesDataSetFreqTrac | 1.3.6.1.4.1.2356.14.2.28.7.44 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockTimePropertiesDataSetPTPTimeScale | 1.3.6.1.4.1.2356.14.2.28.7.45 | Integer32 | RW | |
scalar · Integer32 · read-write · current 0:false 1:true | ||||
| SlcsPTPClockConfEntryClockTimePropertiesDataSetTimeSource | 1.3.6.1.4.1.2356.14.2.28.7.46 | Integer32 | RW | |
scalar · Integer32 · read-write · current range: 0-255 | ||||
| SlcsPTPClockConfEntryFilterParametersFilterType | 1.3.6.1.4.1.2356.14.2.28.7.47 | Integer32 | RW | |
scalar · Integer32 · read-write · current Shows the filter type used which can be either the basic filter or an advanced filter that can be configured to use only a fraction of the packets received (i.e. the packets that have experienced the least latency). 0:BASIC | ||||
| SlcsPTPClockConfEntryFilterParametersDelayFilter | 1.3.6.1.4.1.2356.14.2.28.7.48 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-6 | ||||
| SlcsPTPClockConfEntryFilterParametersPeriod | 1.3.6.1.4.1.2356.14.2.28.7.49 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:1-10000 | ||||
| SlcsPTPClockConfEntryFilterParametersDist | 1.3.6.1.4.1.2356.14.2.28.7.50 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:1-10 | ||||
| SlcsPTPClockConfEntryServoParametersDisplay | 1.3.6.1.4.1.2356.14.2.28.7.51 | Integer32 | RW | |
scalar · Integer32 · read-write · current If true then Offset From Master, MeanPathDelay and clockAdjustment are logged on the debug terminal 0:false 1:true | ||||
| SlcsPTPClockConfEntryServoParametersPEnable | 1.3.6.1.4.1.2356.14.2.28.7.52 | Integer32 | RW | |
scalar · Integer32 · read-write · current If true the P part of the algorithm is included 0:false 1:true | ||||
| SlcsPTPClockConfEntryServoParametersIEnable | 1.3.6.1.4.1.2356.14.2.28.7.53 | Integer32 | RW | |
scalar · Integer32 · read-write · current If true the I part of the algorithm is included 0:false 1:true | ||||
| SlcsPTPClockConfEntryServoParametersDEnable | 1.3.6.1.4.1.2356.14.2.28.7.54 | Integer32 | RW | |
scalar · Integer32 · read-write · current If true the D part of the algorithm is included 0:false 1:true | ||||
| SlcsPTPClockConfEntryServoParametersPConstant | 1.3.6.1.4.1.2356.14.2.28.7.55 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-1000 | ||||
| SlcsPTPClockConfEntryServoParametersIConstant | 1.3.6.1.4.1.2356.14.2.28.7.56 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-10000 | ||||
| SlcsPTPClockConfEntryServoParametersDConstant | 1.3.6.1.4.1.2356.14.2.28.7.57 | Integer32 | RW | |
scalar · Integer32 · read-write · current range:0-1000 | ||||
| TlcsPTPClockPortDataSetConfTable | 1.3.6.1.4.1.2356.14.2.28.8 | NA | ||
| RlcsPTPClockPortDataSetConfEntry | 1.3.6.1.4.1.2356.14.2.28.8.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPTPClockPortDataSetConfPort | 1.3.6.1.4.1.2356.14.2.28.8.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsPTPClockConfEntryPortConfEnable | 1.3.6.1.4.1.2356.14.2.28.8.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current 0:false 1:true | ||||
| ClcsPTPClockConfEntryPortConfStat | 1.3.6.1.4.1.2356.14.2.28.8.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Dynamic member portState: Current state of the port. | ||||
| ClcsPTPClockConfEntryPortConfMDR | 1.3.6.1.4.1.2356.14.2.28.8.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Dynamic member log Min Delay Req Interval: The delay request interval announced by the master. | ||||
| ClcsPTPClockConfEntryPortConfPeerMeanPathDel | 1.3.6.1.4.1.2356.14.2.28.8.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The path delay measured by the port in P2P mode. In E2E mode this value is 0 | ||||
| ClcsPTPClockConfEntryPortConfAnv | 1.3.6.1.4.1.2356.14.2.28.8.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The interval for issuing announce messages in master state. Range is -3 to 4. | ||||
| ClcsPTPClockConfEntryPortConfATo | 1.3.6.1.4.1.2356.14.2.28.8.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current The timeout for receiving announce messages on the port. Range is 1 to 10. | ||||
| ClcsPTPClockConfEntryPortConfSyv | 1.3.6.1.4.1.2356.14.2.28.8.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current The interval for issuing sync messages in master. Range is -7 to 4. | ||||
| ClcsPTPClockConfEntryPortConfDlm | 1.3.6.1.4.1.2356.14.2.28.8.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current Configurable member delayMechanism: The delay mechanism used for the port: e2e End to end delay measurement p2p Peer to peer delay measurement. Can be defined per port in an Ordinary/Boundary clock. In a transparent clock all ports use the same delay mechanism, determined by the clock type. 1:e2e 2:p2p | ||||
| ClcsPTPClockConfEntryPortConfMPR | 1.3.6.1.4.1.2356.14.2.28.8.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current The interval for issuing Delay_Req messages for the port in E2e mode. This value is announced from the master to the slave in an announce message. The value is reflected in the MDR field in the Slave The interval for issuing Pdelay_Req messages for the port in P2P mode Note: The interpretation of this parameter has changed from release 2.40. In earlier versions the value was interpreted relative to the Sync interval, this was a violation of the standard, so now the value is interpreted as an interval. I.e. MPR = 0 => 1 Delay_Req pr sec, independent of the Sync rate. Range is -7 to 5. | ||||
| ClcsPTPClockConfEntryPortConfDelayAsymmetry | 1.3.6.1.4.1.2356.14.2.28.8.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current If the transmission delay for a link in not symmetric, the asymmetry can be configured here, see IEEE 1588 Section 7.4.2 Communication path asymmetry Range is -100000 to 100000. | ||||
| ClcsPTPClockConfEntryPortConfIngressLatency | 1.3.6.1.4.1.2356.14.2.28.8.1.12 | Integer32 | RW | |
column · Integer32 · read-write · current Ingress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. Range is -100000 to 100000. | ||||
| ClcsPTPClockConfEntryPortConfEgressLatency | 1.3.6.1.4.1.2356.14.2.28.8.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current Egress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. Range is -100000 to 100000. | ||||
| ClcsPTPClockConfEntryPortConfVersion | 1.3.6.1.4.1.2356.14.2.28.8.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The current implementation only supports PTP version 2 | ||||
| TlcsPTPClockUnicastSlaveConfTable | 1.3.6.1.4.1.2356.14.2.28.9 | NA | ||
| RlcsPTPClockUnicastSlaveConfEntry | 1.3.6.1.4.1.2356.14.2.28.9.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPTPClockConfEntryUnicastSlaveConfIndex | 1.3.6.1.4.1.2356.14.2.28.9.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsPTPClockConfEntryUnicastSlaveConfDuration | 1.3.6.1.4.1.2356.14.2.28.9.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The number of seconds a master is requested to send Announce/Sync messages. The request is repeated from the slave each Duration/4 seconds. range:10-1000 | ||||
| ClcsPTPClockConfEntryUnicastSlaveConfIPAddress | 1.3.6.1.4.1.2356.14.2.28.9.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current IPv4 Address of the Master clock | ||||
| ClcsPTPClockConfEntryUnicastSlaveConfGrant | 1.3.6.1.4.1.2356.14.2.28.9.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The granted repetition period for the sync message | ||||
| ClcsPTPClockConfEntryUnicastSlaveConfCommState | 1.3.6.1.4.1.2356.14.2.28.9.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The state of the communication with the master, possible values are: IDLE : The entry is not in use. INIT : Announce is sent to the master (Waiting for a response). CONN : The master has responded. SELL : The assigned master is selected as current master. SYNC : The master is sending Sync messages. | ||||
| NlcsETHLINKOAM | 1.3.6.1.4.1.2356.14.2.29 | |||
| TlcsEthLinkOAMPortConfTable | 1.3.6.1.4.1.2356.14.2.29.1 | NA | ||
| RlcsEthLinkOAMPortConfEntry | 1.3.6.1.4.1.2356.14.2.29.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsEthLinkOAMPortConfIndex | 1.3.6.1.4.1.2356.14.2.29.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsEthLinkOAMPortConfOAMEnable | 1.3.6.1.4.1.2356.14.2.29.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether Link OAM is enabled on this switch port. Enabling Link OAM provides the network operators the ability to monitor the health of the network and quickly determine the location of failing links or fault conditions. 0:disable 1:enable | ||||
| ClcsEthLinkOAMPortConfOAMMode | 1.3.6.1.4.1.2356.14.2.29.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Configures the OAM Mode as Active or Passive. The default mode is Passive. 0:Passive mode 1:Active mode | ||||
| ClcsEthLinkOAMPortConfLoopbackSupport | 1.3.6.1.4.1.2356.14.2.29.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the loopback support is enabled for the switch port. 0:disable 1:enable | ||||
| ClcsEthLinkOAMPortConfLinkMonitorSupport | 1.3.6.1.4.1.2356.14.2.29.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the Link Monitor support is enabled for the switch port. 0:disable 1:enable | ||||
| ClcsEthLinkOAMPortConfMIBRetrievalSupport | 1.3.6.1.4.1.2356.14.2.29.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether the MIB Retrieval Support is enabled for the switch port. 0:disable 1:enable | ||||
| ClcsEthLinkOAMPortConfLoopbackOperation | 1.3.6.1.4.1.2356.14.2.29.1.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current If the Loopback support is enabled, enabling this field will start a loopback operation for the port. 0:disable 1:enable | ||||
| TlcsEthLinkOAMPortDetailStatusTable | 1.3.6.1.4.1.2356.14.2.29.2 | NA | ||
table · not-accessible · current Eth Link OAM Port Detail Status table | ||||
| RlcsEthLinkOAMPortDetailStatusEntry | 1.3.6.1.4.1.2356.14.2.29.2.1 | NA | ||
row · not-accessible · current Eth Link OAM Port Detail Status entry | ||||
| ClcsEthLinkOAMPortDetailStatusIndex | 1.3.6.1.4.1.2356.14.2.29.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsEthLinkOAMPortPDUPermission | 1.3.6.1.4.1.2356.14.2.29.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current This field is available only for the Local DTE. It displays the current permission rules set for the local DTE. Possible values are Link fault, Receive only, Information exchange only, ANY. | ||||
| ClcsEthLinkOAMPortDiscoveryState | 1.3.6.1.4.1.2356.14.2.29.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Displays the current state of the discovery process. Possible states are Fault state, Active state, Passive state, SEND_LOCAL_REMOTE_STATE, SEND_LOCAL_REMOTE_OK_STATE, SEND_ANY_STATE. | ||||
| ClcsEthLinkOAMPortPeerMACAddress | 1.3.6.1.4.1.2356.14.2.29.2.1.4 | DisplayString | RO | |
| ClcsEthLinkOAMPortLocalMode | 1.3.6.1.4.1.2356.14.2.29.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The Mode in which the Link OAM is operating, Active or Passive. | ||||
| ClcsEthLinkOAMPortLocalUnidirectionalOperationSupport | 1.3.6.1.4.1.2356.14.2.29.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY. | ||||
| ClcsEthLinkOAMPortLocalRemoteLoopbackSupport | 1.3.6.1.4.1.2356.14.2.29.2.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current If status is enabled, DTE is capable of OAM remote loopback mode. | ||||
| ClcsEthLinkOAMPortLocalLinkMonitoringSupport | 1.3.6.1.4.1.2356.14.2.29.2.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current If status is enabled, DTE supports interpreting Link Events. | ||||
| ClcsEthLinkOAMPortLocalMIBRetrievalSupport | 1.3.6.1.4.1.2356.14.2.29.2.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current If status ie enabled DTE supports sending Variable Response OAMPDUs. | ||||
| ClcsEthLinkOAMPortLocalMTUSize | 1.3.6.1.4.1.2356.14.2.29.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the remotes Maximum PDU Size and the smaller of the two is used. | ||||
| ClcsEthLinkOAMPortLocalMultiplexerState | 1.3.6.1.4.1.2356.14.2.29.2.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's. | ||||
| ClcsEthLinkOAMPortLocalParserState | 1.3.6.1.4.1.2356.14.2.29.2.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs. | ||||
| ClcsEthLinkOAMPortLocalOrganizationalUniqueIdentification | 1.3.6.1.4.1.2356.14.2.29.2.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current 24-bit Organizationally Unique Identifier of the vendor. | ||||
| ClcsEthLinkOAMPortLocalPDURevision | 1.3.6.1.4.1.2356.14.2.29.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current It indicates the current revision of the Information TLV. The value of this field shall start at zero and be incremented each time something in the Information TLV changes. Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed (an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed). | ||||
| ClcsEthLinkOAMPortPeerMode | 1.3.6.1.4.1.2356.14.2.29.2.1.15 | DisplayString | RO | |
column · DisplayString · read-only · current The Mode in which the Link OAM is operating, Active or Passive. | ||||
| ClcsEthLinkOAMPortPeerUnidirectionalOperationSupport | 1.3.6.1.4.1.2356.14.2.29.2.1.16 | DisplayString | RO | |
column · DisplayString · read-only · current This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY. | ||||
| ClcsEthLinkOAMPortPeerRemoteLoopbackSupport | 1.3.6.1.4.1.2356.14.2.29.2.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current If status is enabled, DTE is capable of OAM remote loopback mode. | ||||
| ClcsEthLinkOAMPortPeerLinkMonitoringSupport | 1.3.6.1.4.1.2356.14.2.29.2.1.18 | DisplayString | RO | |
column · DisplayString · read-only · current If status is enabled, DTE supports interpreting Link Events. | ||||
| ClcsEthLinkOAMPortPeerMIBRetrievalSupport | 1.3.6.1.4.1.2356.14.2.29.2.1.19 | DisplayString | RO | |
column · DisplayString · read-only · current If status ie enabled DTE supports sending Variable Response OAMPDUs. | ||||
| ClcsEthLinkOAMPortPeerMTUSize | 1.3.6.1.4.1.2356.14.2.29.2.1.20 | DisplayString | RO | |
column · DisplayString · read-only · current It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the remotes Maximum PDU Size and the smaller of the two is used. | ||||
| ClcsEthLinkOAMPortPeerMultiplexerState | 1.3.6.1.4.1.2356.14.2.29.2.1.21 | DisplayString | RO | |
column · DisplayString · read-only · current When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's. | ||||
| ClcsEthLinkOAMPortPeerParserState | 1.3.6.1.4.1.2356.14.2.29.2.1.22 | DisplayString | RO | |
column · DisplayString · read-only · current When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs. | ||||
| ClcsEthLinkOAMPortPeerOrganizationalUniqueIdentification | 1.3.6.1.4.1.2356.14.2.29.2.1.23 | DisplayString | RO | |
column · DisplayString · read-only · current 24-bit Organizationally Unique Identifier of the vendor. | ||||
| ClcsEthLinkOAMPortPDURevision | 1.3.6.1.4.1.2356.14.2.29.2.1.24 | DisplayString | RO | |
column · DisplayString · read-only · current It indicates the current revision of the Information TLV. The value of this field shall start at zero and be incremented each time something in the Information TLV changes. Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed (an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed). | ||||
| TlcsEthLinkOAMPortLinkEventConfTable | 1.3.6.1.4.1.2356.14.2.29.3 | NA | ||
table · not-accessible · current Eth Link OAM Port Link Event Conf Table | ||||
| RlcsEthLinkOAMPortLinkEventConfEntry | 1.3.6.1.4.1.2356.14.2.29.3.1 | NA | ||
| ClcsPortLinkEventConfIndex | 1.3.6.1.4.1.2356.14.2.29.3.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsPortLinkEventConfErrorFrameEventErrorWindow | 1.3.6.1.4.1.2356.14.2.29.3.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The Errored Frame Event counts the number of errored frames detected during the specified period. Represents the window period in the order of 1 sec for the observation of various link events. range: 1-60 | ||||
| ClcsPortLinkEventConfErrorFrameEventErrorThreshold | 1.3.6.1.4.1.2356.14.2.29.3.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The Errored Frame Event counts the number of errored frames detected during the specified period. Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error. range:0-0xffffffff | ||||
| ClcsPortLinkEventConfSymbolPeriodErrorEventErrorWindow | 1.3.6.1.4.1.2356.14.2.29.3.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The Errored Symbol Period Event counts the number of symbol errors that occurred during the specified period. Represents the window period in the order of 1 sec for the observation of various link events. range: 1-60 | ||||
| ClcsPortLinkEventConfSymbolPeriodErrorEventErrorThreshold | 1.3.6.1.4.1.2356.14.2.29.3.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current The Errored Symbol Period Event counts the number of symbol errors that occurred during the specified period. Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error. range:0-0xffffffff | ||||
| ClcsPortLinkEventConfSecondsSummaryEventErrorWindow | 1.3.6.1.4.1.2356.14.2.29.3.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The Errored Frame Seconds Summary Event TLV counts the number of errored frame seconds that occurred during the specified period. Represents the window period in the order of 1 sec for the observation of various link events. range: 10-900 | ||||
| ClcsPortLinkEventConfSecondsSummaryEventErrorThreshold | 1.3.6.1.4.1.2356.14.2.29.3.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current The Errored Frame Seconds Summary Event TLV counts the number of errored frame seconds that occurred during the specified period. Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error. range:0-0xffff | ||||
| TlcsEthLinkOAMPortDetailedStatisticsTable | 1.3.6.1.4.1.2356.14.2.29.4 | NA | ||
table · not-accessible · current Eth Link OAM Port Detailed Statistics Table | ||||
| RlcsEthLinkOAMPortDetailedStatisticsEntry | 1.3.6.1.4.1.2356.14.2.29.4.1 | NA | ||
row · not-accessible · current Eth Link OAM Port Detailed Statistics Entry | ||||
| ClcsPortDetailedStatisticsIndex | 1.3.6.1.4.1.2356.14.2.29.4.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsPortDetailedStatisticsRxOAMInformationPDUs | 1.3.6.1.4.1.2356.14.2.29.4.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The number of received and transmitted OAM Information PDU's. Discontinuities of this counter can occur at re-initialization of the management system. | ||||
| ClcsPortDetailedStatisticsRxUniqueErrorEventNotification | 1.3.6.1.4.1.2356.14.2.29.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of unique Event OAMPDUs received and transmitted on this interface. Event Notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. Duplicate Event Notification transmissions are counted by Duplicate Event Notification counters for Tx and Rx respectively. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number. | ||||
| ClcsPortDetailedStatisticsRxDuplicateErrorEventNotification | 1.3.6.1.4.1.2356.14.2.29.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of duplicate Event OAMPDUs received and transmitted on this interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number. | ||||
| ClcsPortDetailedStatisticsRxLoopbackControl | 1.3.6.1.4.1.2356.14.2.29.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Loopback Control OAMPDUs received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsRxVariableRequest | 1.3.6.1.4.1.2356.14.2.29.4.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Variable Request OAMPDUs received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsRxVariableResponse | 1.3.6.1.4.1.2356.14.2.29.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Variable Response OAMPDUs received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsRxOrgSpecificPDUs | 1.3.6.1.4.1.2356.14.2.29.4.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Organization Specific OAMPDUs transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsRxUnsupportedCodes | 1.3.6.1.4.1.2356.14.2.29.4.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. | ||||
| ClcsPortDetailedStatisticsRxLinkFaultPDUs | 1.3.6.1.4.1.2356.14.2.29.4.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Link fault PDU's received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsRxDyingGasp | 1.3.6.1.4.1.2356.14.2.29.4.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Dying Gasp events received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsRxCriticalEventPDUs | 1.3.6.1.4.1.2356.14.2.29.4.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Critical event PDU's received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsTxOAMInformationPDUs | 1.3.6.1.4.1.2356.14.2.29.4.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The number of received and transmitted OAM Information PDU's. Discontinuities of this counter can occur at re-initialization of the management system. | ||||
| ClcsPortDetailedStatisticsTxUniqueErrorEventNotification | 1.3.6.1.4.1.2356.14.2.29.4.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of unique Event OAMPDUs received and transmitted on this interface. Event Notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. Duplicate Event Notification transmissions are counted by Duplicate Event Notification counters for Tx and Rx respectively. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number. | ||||
| ClcsPortDetailedStatisticsTxDuplicateErrorEventNotification | 1.3.6.1.4.1.2356.14.2.29.4.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of duplicate Event OAMPDUs received and transmitted on this interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number. | ||||
| ClcsPortDetailedStatisticsTxLoopbackControl | 1.3.6.1.4.1.2356.14.2.29.4.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Loopback Control OAMPDUs received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsTxVariableRequest | 1.3.6.1.4.1.2356.14.2.29.4.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Variable Request OAMPDUs received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsTxVariableResponse | 1.3.6.1.4.1.2356.14.2.29.4.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Variable Response OAMPDUs received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsTxOrgSpecificPDUs | 1.3.6.1.4.1.2356.14.2.29.4.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Organization Specific OAMPDUs transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsTxUnsupportedCodes | 1.3.6.1.4.1.2356.14.2.29.4.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. | ||||
| ClcsPortDetailedStatisticsTxLinkFaultPDUs | 1.3.6.1.4.1.2356.14.2.29.4.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Link fault PDU's received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsTxDyingGasp | 1.3.6.1.4.1.2356.14.2.29.4.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Dying Gasp events received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsTxCriticalEventPDUs | 1.3.6.1.4.1.2356.14.2.29.4.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current A count of the number of Critical event PDU's received and transmitted on this interface. | ||||
| ClcsPortDetailedStatisticsClear | 1.3.6.1.4.1.2356.14.2.29.4.1.24 | Integer32 | RW | |
column · Integer32 · read-write · current Clears the counters for the selected port. | ||||
| TlcsEthLinkOAMPortEventDetailedStatisticsTable | 1.3.6.1.4.1.2356.14.2.29.5 | NA | ||
table · not-accessible · current Eth Link OAM Port Event Detailed Statistics Table | ||||
| RlcsEthLinkOAMPortEventDetailedStatisticsEntry | 1.3.6.1.4.1.2356.14.2.29.5.1 | NA | ||
row · not-accessible · current Eth Link OAM Port Event Detailed Statistics Entry | ||||
| ClcsDetailedStatisticsIndex | 1.3.6.1.4.1.2356.14.2.29.5.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsDetailedStatisticsLocalSequenceNumber | 1.3.6.1.4.1.2356.14.2.29.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the total number of events occurred at the remote end. | ||||
| ClcsDetailedStatisticsLocalFrameErrorEventTimestamp | 1.3.6.1.4.1.2356.14.2.29.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| ClcsDetailedStatisticsLocalFrameErrorEventWindow | 1.3.6.1.4.1.2356.14.2.29.5.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1) The default value is one second. 2) The lower bound is one second. 3) The upper bound is one minute. | ||||
| ClcsDetailedStatisticsLocalFrameErrorEventThreshold | 1.3.6.1.4.1.2356.14.2.29.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of detected errored frames in the period is required to be equal to or greater than in order for the event to be generated. 1) The default value is one frame error. 2) The lower bound is zero frame errors. 3) The upper bound is unspecified. | ||||
| ClcsDetailedStatisticsLocalFrameErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of detected errored frames in the period. | ||||
| ClcsDetailedStatisticsLocalTotalFrameErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsLocalTotalFrameErrorEvents | 1.3.6.1.4.1.2356.14.2.29.5.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of Errored Frame Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsLocalFramePeriodErrorEventTimestamp | 1.3.6.1.4.1.2356.14.2.29.5.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| ClcsDetailedStatisticsLocalFramePeriodErrorEventWindow | 1.3.6.1.4.1.2356.14.2.29.5.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the duration of period in terms of frames. | ||||
| ClcsDetailedStatisticsLocalFramePeriodErrorEventThreshold | 1.3.6.1.4.1.2356.14.2.29.5.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of errored frames in the period is required to be equal to or greater than in order for the event to be generated. | ||||
| ClcsDetailedStatisticsLocalFramePeriodErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of frame errors in the period. | ||||
| ClcsDetailedStatisticsLocalTotalFramePeriodErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsLocalTotalFramePeriodErrorEvents | 1.3.6.1.4.1.2356.14.2.29.5.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsLocalSymbolPeriodErrorEventTimestamp | 1.3.6.1.4.1.2356.14.2.29.5.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| ClcsDetailedStatisticsLocalSymbolPeriodErrorEventWindow | 1.3.6.1.4.1.2356.14.2.29.5.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of symbols in the period. | ||||
| ClcsDetailedStatisticsLocalSymbolPeriodErrorEventThreshold | 1.3.6.1.4.1.2356.14.2.29.5.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of errored symbols in the period is required to be equal to or greater than in order for the event to be generated. | ||||
| ClcsDetailedStatisticsLocalSymbolPeriodErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of symbol errors in the period. | ||||
| ClcsDetailedStatisticsLocalSymbolFramePeriodErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsLocalSymbolFramePeriodErrorEvents | 1.3.6.1.4.1.2356.14.2.29.5.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsLocalEventSecondsSummaryTimeStamp | 1.3.6.1.4.1.2356.14.2.29.5.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals, encoded as a 16-bit unsigned integer. | ||||
| ClcsDetailedStatisticsLocalEventSecondsSummaryWindow | 1.3.6.1.4.1.2356.14.2.29.5.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer. | ||||
| ClcsDetailedStatisticsLocalEventSecondsSummaryThreshold | 1.3.6.1.4.1.2356.14.2.29.5.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the number of errored frame seconds in the period is required to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer. | ||||
| ClcsDetailedStatisticsLocalEventSecondsSummaryEvents | 1.3.6.1.4.1.2356.14.2.29.5.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer. | ||||
| ClcsDetailedStatisticsLocalEventSecondsSummaryErrorTotal | 1.3.6.1.4.1.2356.14.2.29.5.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsLocalEventSecondsSummaryEventTotal | 1.3.6.1.4.1.2356.14.2.29.5.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer. | ||||
| ClcsDetailedStatisticsRemoteFrameErrorEventTimestamp | 1.3.6.1.4.1.2356.14.2.29.5.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| ClcsDetailedStatisticsRemoteFrameErrorEventWindow | 1.3.6.1.4.1.2356.14.2.29.5.1.28 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1) The default value is one second. 2) The lower bound is one second. 3) The upper bound is one minute. | ||||
| ClcsDetailedStatisticsRemoteFrameErrorEventThreshold | 1.3.6.1.4.1.2356.14.2.29.5.1.29 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of detected errored frames in the period is required to be equal to or greater than in order for the event to be generated. 1) The default value is one frame error. 2) The lower bound is zero frame errors. 3) The upper bound is unspecified. | ||||
| ClcsDetailedStatisticsRemoteFrameErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.30 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of detected errored frames in the period. | ||||
| ClcsDetailedStatisticsRemoteTotalFrameErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsRemoteTotalFrameErrorEvents | 1.3.6.1.4.1.2356.14.2.29.5.1.32 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of Errored Frame Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsRemoteFramePeriodErrorEventTimestamp | 1.3.6.1.4.1.2356.14.2.29.5.1.33 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| ClcsDetailedStatisticsRemoteFramePeriodErrorEventWindow | 1.3.6.1.4.1.2356.14.2.29.5.1.34 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the duration of period in terms of frames. | ||||
| ClcsDetailedStatisticsRemoteFramePeriodErrorEventThreshold | 1.3.6.1.4.1.2356.14.2.29.5.1.35 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of errored frames in the period is required to be equal to or greater than in order for the event to be generated. | ||||
| ClcsDetailedStatisticsRemoteFramePeriodErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.36 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of frame errors in the period. | ||||
| ClcsDetailedStatisticsRemoteTotalFramePeriodErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.37 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsRemoteTotalFramePeriodErrorEvents | 1.3.6.1.4.1.2356.14.2.29.5.1.38 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsRemoteSymbolPeriodErrorEventTimestamp | 1.3.6.1.4.1.2356.14.2.29.5.1.39 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| ClcsDetailedStatisticsRemoteSymbolPeriodErrorEventWindow | 1.3.6.1.4.1.2356.14.2.29.5.1.40 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of symbols in the period. | ||||
| ClcsDetailedStatisticsRemoteSymbolPeriodErrorEventThreshold | 1.3.6.1.4.1.2356.14.2.29.5.1.41 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of errored symbols in the period is required to be equal to or greater than in order for the event to be generated. | ||||
| ClcsDetailedStatisticsRemoteSymbolPeriodErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.42 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of symbol errors in the period. | ||||
| ClcsDetailedStatisticsRemoteSymbolFramePeriodErrors | 1.3.6.1.4.1.2356.14.2.29.5.1.43 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsRemoteSymbolFramePeriodErrorEvents | 1.3.6.1.4.1.2356.14.2.29.5.1.44 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsRemoteEventSecondsSummaryTimeStamp | 1.3.6.1.4.1.2356.14.2.29.5.1.45 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals, encoded as a 16-bit unsigned integer. | ||||
| ClcsDetailedStatisticsRemoteEventSecondsSummaryWindow | 1.3.6.1.4.1.2356.14.2.29.5.1.46 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer. | ||||
| ClcsDetailedStatisticsRemoteEventSecondsSummaryThreshold | 1.3.6.1.4.1.2356.14.2.29.5.1.47 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the number of errored frame seconds in the period is required to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer. | ||||
| ClcsDetailedStatisticsRemoteEventSecondsSummaryEvents | 1.3.6.1.4.1.2356.14.2.29.5.1.48 | Integer32 | RO | |
column · Integer32 · read-only · current This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer. | ||||
| ClcsDetailedStatisticsRemoteEventSecondsSummaryErrorTotal | 1.3.6.1.4.1.2356.14.2.29.5.1.49 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset. | ||||
| ClcsDetailedStatisticsRemoteEventSecondsSummaryEventTotal | 1.3.6.1.4.1.2356.14.2.29.5.1.50 | Integer32 | RO | |
column · Integer32 · read-only · current This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer. | ||||
| NlcsIPMC | 1.3.6.1.4.1.2356.14.2.32 | |||
| NlcsIGMPSnooping | 1.3.6.1.4.1.2356.14.2.32.1 | |||
| SlcsIGMPSnoopingBasicConfigSnoopingEnabled | 1.3.6.1.4.1.2356.14.2.32.1.2 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Snooping Enabled 0:Disable 1:Enable | ||||
| SlcsIGMPSnoopingBasicConfigUnregisteredIPMCv4FloodingEnabled | 1.3.6.1.4.1.2356.14.2.32.1.3 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Unregistered IPMCv4 Flooding Enabled 0:Disable 1:Enable | ||||
| SlcsIGMPSnoopingBasicConfigIGMPSSMRange | 1.3.6.1.4.1.2356.14.2.32.1.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current IGMP SSM Range IPv4 multicast address. | ||||
| SlcsIGMPSnoopingBasicConfigIGMPSSMRangeLength | 1.3.6.1.4.1.2356.14.2.32.1.5 | Integer32 (4..32) | RW | |
scalar · Integer32 (4..32) · read-write · current IGMP SSM Range prefix. | ||||
| SlcsIGMPSnoopingBasicConfigLeaveProxyEnabled | 1.3.6.1.4.1.2356.14.2.32.1.6 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Leave Proxy Enabled 0:Disable 1:Enable | ||||
| SlcsIGMPSnoopingBasicConfigProxyEnabled | 1.3.6.1.4.1.2356.14.2.32.1.7 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Proxy Enabled 0:Disable 1:Enable | ||||
| TlcsIGMPSnoopingPortRelatedTable | 1.3.6.1.4.1.2356.14.2.32.1.8 | NA | ||
| RlcsIGMPSnoopingPortRelatedEntry | 1.3.6.1.4.1.2356.14.2.32.1.8.1 | NA | ||
row · not-accessible · current | ||||
| ClcsIGMPSnoopingPortRelatedPort | 1.3.6.1.4.1.2356.14.2.32.1.8.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsIGMPSnoopingPortRouterPort | 1.3.6.1.4.1.2356.14.2.32.1.8.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Router Port 0:Disable 1:Enable | ||||
| ClcsIGMPSnoopingPortFastLeave | 1.3.6.1.4.1.2356.14.2.32.1.8.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Fast Leave 0:Disable 1:Enable | ||||
| ClcsIGMPSnoopingPortThrottling | 1.3.6.1.4.1.2356.14.2.32.1.8.1.4 | Integer32 (0..10) | RW | |
column · Integer32 (0..10) · read-write · current Throttling. Range: 0:unlimited, 1-10 | ||||
| ClcsIGMPSnoopingPortFilteringProfile | 1.3.6.1.4.1.2356.14.2.32.1.8.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current Filtering Profile | ||||
| TlcsIGMPSnoopingVLANConfigTable | 1.3.6.1.4.1.2356.14.2.32.1.9 | NA | ||
| RlcsIGMPSnoopingVLANConfigEntry | 1.3.6.1.4.1.2356.14.2.32.1.9.1 | NA | ||
row · not-accessible · current | ||||
| ClcsIGMPSnoopingVLANConfigIndex | 1.3.6.1.4.1.2356.14.2.32.1.9.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsIGMPSnoopingVLANConfigVLANID | 1.3.6.1.4.1.2356.14.2.32.1.9.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsIGMPSnoopingVLANConfigSnoopingEnabled | 1.3.6.1.4.1.2356.14.2.32.1.9.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current IGMP Snooping Enabled 0:Disable 1:Enable | ||||
| ClcsIGMPSnoopingVLANConfigQuerierElection | 1.3.6.1.4.1.2356.14.2.32.1.9.1.4 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Querier Election 0:Disable 1:Enable | ||||
| ClcsIGMPSnoopingVLANConfigQuerierAddress | 1.3.6.1.4.1.2356.14.2.32.1.9.1.5 | IpAddress | RW | |
column · IpAddress · read-write · current Querier Address | ||||
| ClcsIGMPSnoopingVLANConfigCompatibility | 1.3.6.1.4.1.2356.14.2.32.1.9.1.6 | Integer32 (0..3) | RW | |
column · Integer32 (0..3) · read-write · current Compatibility 0:IGMP-Auto 1:Forced IGMPv1 2:Forced IGMPv2 3:Forced IGMPv3 | ||||
| ClcsIGMPSnoopingVLANConfigPRI | 1.3.6.1.4.1.2356.14.2.32.1.9.1.7 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current Priority of Interface. | ||||
| ClcsIGMPSnoopingVLANConfigRV | 1.3.6.1.4.1.2356.14.2.32.1.9.1.8 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current Robustness Variable. | ||||
| ClcsIGMPSnoopingVLANConfigQI | 1.3.6.1.4.1.2356.14.2.32.1.9.1.9 | Integer32 (1..31744) | RW | |
column · Integer32 (1..31744) · read-write · current Query Interval. | ||||
| ClcsIGMPSnoopingVLANConfigQRI | 1.3.6.1.4.1.2356.14.2.32.1.9.1.10 | Integer32 (0..31744) | RW | |
column · Integer32 (0..31744) · read-write · current Query Response Interval. | ||||
| ClcsIGMPSnoopingVLANConfigLLQI | 1.3.6.1.4.1.2356.14.2.32.1.9.1.11 | Integer32 (0..31744) | RW | |
column · Integer32 (0..31744) · read-write · current Last Member Query Interval. | ||||
| ClcsIGMPSnoopingVLANConfigURI | 1.3.6.1.4.1.2356.14.2.32.1.9.1.12 | Integer32 (0..31744) | RW | |
column · Integer32 (0..31744) · read-write · current Unsolicited Report Interval. | ||||
| SlcsIGMPSnoopingStatusClear | 1.3.6.1.4.1.2356.14.2.32.1.10 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Clears all Statistics counters. | ||||
| TlcsIGMPSnoopingStatusTable | 1.3.6.1.4.1.2356.14.2.32.1.11 | NA | ||
| RlcsIGMPSnoopingStatusEntry | 1.3.6.1.4.1.2356.14.2.32.1.11.1 | NA | ||
row · not-accessible · current | ||||
| ClcsIGMPSnoopingStatusIndex | 1.3.6.1.4.1.2356.14.2.32.1.11.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsIGMPSnoopingStatusVLANID | 1.3.6.1.4.1.2356.14.2.32.1.11.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsIGMPSnoopingStatusQuerierVersion | 1.3.6.1.4.1.2356.14.2.32.1.11.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Querier Version | ||||
| ClcsIGMPSnoopingStatusHostVersion | 1.3.6.1.4.1.2356.14.2.32.1.11.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Host Version | ||||
| ClcsIGMPSnoopingStatusQuerierStatus | 1.3.6.1.4.1.2356.14.2.32.1.11.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Querier Status. 0:Init 1:Idle 2:Active | ||||
| ClcsIGMPSnoopingStatusQueriesTransmitted | 1.3.6.1.4.1.2356.14.2.32.1.11.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Queries Transmitted. | ||||
| ClcsIGMPSnoopingStatusQueriesReceived | 1.3.6.1.4.1.2356.14.2.32.1.11.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Queries Received. | ||||
| ClcsIGMPSnoopingStatusV1ReportsReceived | 1.3.6.1.4.1.2356.14.2.32.1.11.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current V1 Reports Received | ||||
| ClcsIGMPSnoopingStatusV2ReportsReceived | 1.3.6.1.4.1.2356.14.2.32.1.11.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current V2 Reports Received | ||||
| ClcsIGMPSnoopingStatusV3ReportsReceived | 1.3.6.1.4.1.2356.14.2.32.1.11.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current V3 Reports Received | ||||
| ClcsIGMPSnoopingStatusV2LeavesReceived | 1.3.6.1.4.1.2356.14.2.32.1.11.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current V2 Leaves Received | ||||
| TlcsIGMPSnoopingStatusRouterPortTable | 1.3.6.1.4.1.2356.14.2.32.1.12 | NA | ||
| RlcsIGMPSnoopingStatusRouterPortEntry | 1.3.6.1.4.1.2356.14.2.32.1.12.1 | NA | ||
row · not-accessible · current | ||||
| ClcsIGMPSnoopingStatusRouterPortIndex | 1.3.6.1.4.1.2356.14.2.32.1.12.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsIGMPSnoopingStatusRouterPortPort | 1.3.6.1.4.1.2356.14.2.32.1.12.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Switch port number. 0:DISABLE 1:IDLE 2:ACTIVE | ||||
| TlcsIGMPSnoopingGroupInfoTable | 1.3.6.1.4.1.2356.14.2.32.1.13 | NA | ||
| RlcsIGMPSnoopingGroupInfoEntry | 1.3.6.1.4.1.2356.14.2.32.1.13.1 | NA | ||
row · not-accessible · current | ||||
| ClcsIGMPSnoopingGroupInfoIndex | 1.3.6.1.4.1.2356.14.2.32.1.13.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsIGMPSnoopingGroupInfoVLANID | 1.3.6.1.4.1.2356.14.2.32.1.13.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsIGMPSnoopingGroupInfoGroups | 1.3.6.1.4.1.2356.14.2.32.1.13.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Groups | ||||
| ClcsIGMPSnoopingGroupInfoPortMembers | 1.3.6.1.4.1.2356.14.2.32.1.13.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Port Members | ||||
| TlcsIGMPSFMInfoTable | 1.3.6.1.4.1.2356.14.2.32.1.14 | NA | ||
| RlcsIGMPSFMInfoEntry | 1.3.6.1.4.1.2356.14.2.32.1.14.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsIGMPSFMInfoIndex | 1.3.6.1.4.1.2356.14.2.32.1.14.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsIGMPSFMInfoVLANID | 1.3.6.1.4.1.2356.14.2.32.1.14.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsIGMPSFMInfoGroup | 1.3.6.1.4.1.2356.14.2.32.1.14.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Group | ||||
| ClcsIGMPSFMInfoPort | 1.3.6.1.4.1.2356.14.2.32.1.14.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Port | ||||
| ClcsIGMPSFMInfoMode | 1.3.6.1.4.1.2356.14.2.32.1.14.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Mode 0:Exclude. 1:Include | ||||
| ClcsIGMPSFMInfoSourceAddress | 1.3.6.1.4.1.2356.14.2.32.1.14.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Source Address | ||||
| ClcsIGMPSFMInfoType | 1.3.6.1.4.1.2356.14.2.32.1.14.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Type 0:Deny 1:Allow | ||||
| ClcsIGMPSFMInfoHardwareFilterSwitch | 1.3.6.1.4.1.2356.14.2.32.1.14.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Hardware Filter\Switch 0:No 1:Yes | ||||
| NlcsMLDSnooping | 1.3.6.1.4.1.2356.14.2.32.2 | |||
| SlcsMLDSnoopingBasicConfigSnoopingEnabled | 1.3.6.1.4.1.2356.14.2.32.2.2 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Snooping Enabled 0:Disable 1:Enable | ||||
| SlcsMLDSnoopingBasicConfigUnregisteredIPMCv6FloodingEnabled | 1.3.6.1.4.1.2356.14.2.32.2.3 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Unregistered IPMCv6 Flooding Enabled 0:Disable 1:Enable | ||||
| SlcsMLDSnoopingBasicConfigMLDSSMRange | 1.3.6.1.4.1.2356.14.2.32.2.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current MLD SSM Range IPv6 multicast address. | ||||
| SlcsMLDSnoopingBasicConfigMLDSSMRangeLength | 1.3.6.1.4.1.2356.14.2.32.2.5 | Integer32 (8..128) | RW | |
scalar · Integer32 (8..128) · read-write · current MLD SSM Range prefix. | ||||
| SlcsMLDSnoopingBasicConfigLeaveProxyEnabled | 1.3.6.1.4.1.2356.14.2.32.2.6 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Leave Proxy Enabled 0:Disable 1:Enable | ||||
| SlcsMLDSnoopingBasicConfigProxyEnabled | 1.3.6.1.4.1.2356.14.2.32.2.7 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Proxy Enabled 0:Disable 1:Enable | ||||
| TlcsMLDSnoopingPortRelatedTable | 1.3.6.1.4.1.2356.14.2.32.2.8 | NA | ||
| RlcsMLDSnoopingPortRelatedEntry | 1.3.6.1.4.1.2356.14.2.32.2.8.1 | NA | ||
row · not-accessible · current | ||||
| ClcsMLDSnoopingPortRelatedPort | 1.3.6.1.4.1.2356.14.2.32.2.8.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMLDSnoopingPortRouterPort | 1.3.6.1.4.1.2356.14.2.32.2.8.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Router Port 0:Disable 1:Enable | ||||
| ClcsMLDSnoopingPortFastLeave | 1.3.6.1.4.1.2356.14.2.32.2.8.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Fast Leave 0:Disable 1:Enable | ||||
| ClcsMLDSnoopingPortThrottling | 1.3.6.1.4.1.2356.14.2.32.2.8.1.4 | Integer32 (0..10) | RW | |
column · Integer32 (0..10) · read-write · current Throttling. Range: 0:unlimited, 1-10 | ||||
| ClcsMLDSnoopingPortFilteringProfile | 1.3.6.1.4.1.2356.14.2.32.2.8.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current Filtering Profile | ||||
| TlcsMLDSnoopingVLANConfigTable | 1.3.6.1.4.1.2356.14.2.32.2.9 | NA | ||
| RlcsMLDSnoopingVLANConfigEntry | 1.3.6.1.4.1.2356.14.2.32.2.9.1 | NA | ||
row · not-accessible · current | ||||
| ClcsMLDSnoopingVLANConfigIndex | 1.3.6.1.4.1.2356.14.2.32.2.9.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMLDSnoopingVLANConfigVLANID | 1.3.6.1.4.1.2356.14.2.32.2.9.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsMLDSnoopingVLANConfigSnoopingEnabled | 1.3.6.1.4.1.2356.14.2.32.2.9.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current IGMP Snooping Enabled 0:Disable 1:Enable | ||||
| ClcsMLDSnoopingVLANConfigQuerierElection | 1.3.6.1.4.1.2356.14.2.32.2.9.1.4 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Querier Election 0:Disable 1:Enable | ||||
| ClcsMLDSnoopingVLANConfigCompatibility | 1.3.6.1.4.1.2356.14.2.32.2.9.1.6 | Integer32 (0..2) | RW | |
column · Integer32 (0..2) · read-write · current Compatibility 0:MLD-Auto 1:Forced MLDv1 2:Forced MLDv2 | ||||
| ClcsMLDSnoopingVLANConfigPRI | 1.3.6.1.4.1.2356.14.2.32.2.9.1.7 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current Priority of Interface. | ||||
| ClcsMLDSnoopingVLANConfigRV | 1.3.6.1.4.1.2356.14.2.32.2.9.1.8 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current Robustness Variable. | ||||
| ClcsMLDSnoopingVLANConfigQI | 1.3.6.1.4.1.2356.14.2.32.2.9.1.9 | Integer32 (1..31744) | RW | |
column · Integer32 (1..31744) · read-write · current Query Interval. | ||||
| ClcsMLDSnoopingVLANConfigQRI | 1.3.6.1.4.1.2356.14.2.32.2.9.1.10 | Integer32 (0..31744) | RW | |
column · Integer32 (0..31744) · read-write · current Query Response Interval. | ||||
| ClcsMLDSnoopingVLANConfigLLQI | 1.3.6.1.4.1.2356.14.2.32.2.9.1.11 | Integer32 (0..31744) | RW | |
column · Integer32 (0..31744) · read-write · current Last Member Query Interval. | ||||
| ClcsMLDSnoopingVLANConfigURI | 1.3.6.1.4.1.2356.14.2.32.2.9.1.12 | Integer32 (0..31744) | RW | |
column · Integer32 (0..31744) · read-write · current Unsolicited Report Interval. | ||||
| SlcsMLDSnoopingStatusClear | 1.3.6.1.4.1.2356.14.2.32.2.10 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Clears all Statistics counters. | ||||
| TlcsMLDSnoopingStatusTable | 1.3.6.1.4.1.2356.14.2.32.2.11 | NA | ||
| RlcsMLDSnoopingStatusEntry | 1.3.6.1.4.1.2356.14.2.32.2.11.1 | NA | ||
row · not-accessible · current | ||||
| ClcsMLDSnoopingStatusIndex | 1.3.6.1.4.1.2356.14.2.32.2.11.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMLDSnoopingStatusVLANID | 1.3.6.1.4.1.2356.14.2.32.2.11.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsMLDSnoopingStatusQuerierVersion | 1.3.6.1.4.1.2356.14.2.32.2.11.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Querier Version | ||||
| ClcsMLDSnoopingStatusHostVersion | 1.3.6.1.4.1.2356.14.2.32.2.11.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Host Version | ||||
| ClcsMLDSnoopingStatusQuerierStatus | 1.3.6.1.4.1.2356.14.2.32.2.11.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Querier Status. 0:Init 1:Idle 2:Active | ||||
| ClcsMLDSnoopingStatusQueriesTransmitted | 1.3.6.1.4.1.2356.14.2.32.2.11.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Queries Transmitted. | ||||
| ClcsMLDSnoopingStatusQueriesReceived | 1.3.6.1.4.1.2356.14.2.32.2.11.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Queries Received. | ||||
| ClcsMLDSnoopingStatusV1ReportsReceived | 1.3.6.1.4.1.2356.14.2.32.2.11.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current V1 Reports Received | ||||
| ClcsMLDSnoopingStatusV2ReportsReceived | 1.3.6.1.4.1.2356.14.2.32.2.11.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current V2 Reports Received | ||||
| ClcsMLDSnoopingStatusV1LeavesReceived | 1.3.6.1.4.1.2356.14.2.32.2.11.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current V1 Leaves Received | ||||
| TlcsMLDSnoopingStatusRouterPortTable | 1.3.6.1.4.1.2356.14.2.32.2.12 | NA | ||
| RlcsMLDSnoopingStatusRouterPortEntry | 1.3.6.1.4.1.2356.14.2.32.2.12.1 | NA | ||
row · not-accessible · current | ||||
| ClcsMLDSnoopingStatusRouterPortIndex | 1.3.6.1.4.1.2356.14.2.32.2.12.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMLDSnoopingStatusRouterPortPort | 1.3.6.1.4.1.2356.14.2.32.2.12.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Switch port number. 0:DISABLE 1:IDLE 2:ACTIVE | ||||
| TlcsMLDSnoopingGroupInfoTable | 1.3.6.1.4.1.2356.14.2.32.2.13 | NA | ||
| RlcsMLDSnoopingGroupInfoEntry | 1.3.6.1.4.1.2356.14.2.32.2.13.1 | NA | ||
row · not-accessible · current | ||||
| ClcsMLDSnoopingGroupInfoIndex | 1.3.6.1.4.1.2356.14.2.32.2.13.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMLDSnoopingGroupInfoVLANID | 1.3.6.1.4.1.2356.14.2.32.2.13.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsMLDSnoopingGroupInfoGroups | 1.3.6.1.4.1.2356.14.2.32.2.13.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Groups | ||||
| ClcsMLDSnoopingGroupInfoPortMembers | 1.3.6.1.4.1.2356.14.2.32.2.13.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Port Members | ||||
| TlcsMLDSFMInfoTable | 1.3.6.1.4.1.2356.14.2.32.2.14 | NA | ||
| RlcsMLDSFMInfoEntry | 1.3.6.1.4.1.2356.14.2.32.2.14.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsMLDSFMInfoIndex | 1.3.6.1.4.1.2356.14.2.32.2.14.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMLDSFMInfoVLANID | 1.3.6.1.4.1.2356.14.2.32.2.14.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsMLDSFMInfoGroup | 1.3.6.1.4.1.2356.14.2.32.2.14.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Group | ||||
| ClcsMLDSFMInfoPort | 1.3.6.1.4.1.2356.14.2.32.2.14.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Port | ||||
| ClcsMLDSFMInfoMode | 1.3.6.1.4.1.2356.14.2.32.2.14.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Mode 0:Exclude. 1:Include | ||||
| ClcsMLDSFMInfoSourceAddress | 1.3.6.1.4.1.2356.14.2.32.2.14.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Source Address | ||||
| ClcsMLDSFMInfoType | 1.3.6.1.4.1.2356.14.2.32.2.14.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Type 0:Deny 1:Allow | ||||
| ClcsMLDSFMInfoHardwareFilterSwitch | 1.3.6.1.4.1.2356.14.2.32.2.14.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Hardware Filter\Switch 0:No 1:Yes | ||||
| NlcsMVR | 1.3.6.1.4.1.2356.14.2.33 | |||
| NlcsMVRConfig | 1.3.6.1.4.1.2356.14.2.33.1 | |||
| SlcsMVRConfigMVRMode | 1.3.6.1.4.1.2356.14.2.33.1.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current MVR Mode 0:Disable 1:Enable | ||||
| TlcsVLANInterfaceSettingTable | 1.3.6.1.4.1.2356.14.2.33.1.3 | NA | ||
table · not-accessible · current MVR Config table | ||||
| RlcsVLANInterfaceSettingEntry | 1.3.6.1.4.1.2356.14.2.33.1.3.1 | NA | ||
| ClcsVLANInterfaceSettingIndex | 1.3.6.1.4.1.2356.14.2.33.1.3.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current MVR Config index. | ||||
| ClcsVLANInterfaceSettingMVRVID | 1.3.6.1.4.1.2356.14.2.33.1.3.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current MVR VLAN ID | ||||
| ClcsVLANInterfaceSettingMVRName | 1.3.6.1.4.1.2356.14.2.33.1.3.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current MVR Name. Length:0-16 | ||||
| ClcsVLANInterfaceSettingIGMPAddress | 1.3.6.1.4.1.2356.14.2.33.1.3.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current IPv4 IGMP Address | ||||
| ClcsVLANInterfaceSettingMode | 1.3.6.1.4.1.2356.14.2.33.1.3.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Mode. 0:Dynamic 1:Compatible | ||||
| ClcsVLANInterfaceSettingTagging | 1.3.6.1.4.1.2356.14.2.33.1.3.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current Tagging. 0:Untagged 1:Tagged | ||||
| ClcsVLANInterfaceSettingPriority | 1.3.6.1.4.1.2356.14.2.33.1.3.1.7 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current Priority | ||||
| ClcsVLANInterfaceSettingLLQI | 1.3.6.1.4.1.2356.14.2.33.1.3.1.8 | Integer32 (0..31744) | RC | |
column · Integer32 (0..31744) · read-create · current LLQI | ||||
| ClcsVLANInterfaceSettingInterfaceChannelProfile | 1.3.6.1.4.1.2356.14.2.33.1.3.1.9 | DisplayString | RC | |
column · DisplayString · read-create · current Interface Channel Profile. | ||||
| ClcsVLANInterfaceSettingRowStatus | 1.3.6.1.4.1.2356.14.2.33.1.3.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| SlcsMVRVIDIndex | 1.3.6.1.4.1.2356.14.2.33.1.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set VIDIndex before use VLANInterfaceSettingPortRoleTable table. | ||||
| TlcsVLANInterfaceSettingPortRoleTable | 1.3.6.1.4.1.2356.14.2.33.1.5 | NA | ||
table · not-accessible · current VLAN Interface Setting Port Role table | ||||
| RlcsVLANInterfaceSettingPortRoleEntry | 1.3.6.1.4.1.2356.14.2.33.1.5.1 | NA | ||
row · not-accessible · current VLAN Interface Setting Port Role table | ||||
| ClcsVLANInterfaceSettingPortRoleIndex | 1.3.6.1.4.1.2356.14.2.33.1.5.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current VLAN Interface Setting Port Role index. | ||||
| ClcsVLANInterfaceSettingPortRolePort | 1.3.6.1.4.1.2356.14.2.33.1.5.1.2 | Integer32 (0..2) | RW | |
column · Integer32 (0..2) · read-write · current Port Role. 0:Inactive 1:Source 2:Receiver | ||||
| TlcsImmediateLeaveSettingTable | 1.3.6.1.4.1.2356.14.2.33.1.6 | NA | ||
table · not-accessible · current Immediate Leave Setting table | ||||
| RlcsImmediateLeaveSettingEntry | 1.3.6.1.4.1.2356.14.2.33.1.6.1 | NA | ||
| ClcsImmediateLeaveSettingPort | 1.3.6.1.4.1.2356.14.2.33.1.6.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Immediate Leave Setting index. | ||||
| ClcsImmediateLeaveSettingImmediateLeave | 1.3.6.1.4.1.2356.14.2.33.1.6.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Immediate Leave 0:Disable 1:Enable | ||||
| NlcsStatistics | 1.3.6.1.4.1.2356.14.2.33.2 | |||
| SlcsMVRStatisticsClear | 1.3.6.1.4.1.2356.14.2.33.2.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Statistics Clear. 1:Clear | ||||
| TlcsMVRStatisticsTable | 1.3.6.1.4.1.2356.14.2.33.2.3 | NA | ||
| RlcsMVRStatisticsEntry | 1.3.6.1.4.1.2356.14.2.33.2.3.1 | NA | ||
row · not-accessible · current | ||||
| ClcsMVRStatisticsIndex | 1.3.6.1.4.1.2356.14.2.33.2.3.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMVRStatisticsVLANID | 1.3.6.1.4.1.2356.14.2.33.2.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsMVRStatisticsIGMPMLDQueriesReceived | 1.3.6.1.4.1.2356.14.2.33.2.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current IGMP/MLD Queries Received | ||||
| ClcsMVRStatisticsIGMPMLDQueriesTransmitted | 1.3.6.1.4.1.2356.14.2.33.2.3.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current IGMP/MLD Queries Transmitted | ||||
| ClcsMVRStatisticsIGMPv1JoinsReceived | 1.3.6.1.4.1.2356.14.2.33.2.3.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current IGMPv1 Joins Received | ||||
| ClcsMVRStatisticsIGMPv2MLDv1ReportsReceived | 1.3.6.1.4.1.2356.14.2.33.2.3.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current IGMPv2/MLDv1 Reports Received | ||||
| ClcsMVRStatisticsIGMPv3MLDv2ReportsReceived | 1.3.6.1.4.1.2356.14.2.33.2.3.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current IGMPv3/MLDv2 Reports Received | ||||
| ClcsMVRStatisticsIGMPv2MLDv1LeavesReceived | 1.3.6.1.4.1.2356.14.2.33.2.3.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current IGMPv2/MLDv1 Leaves Received | ||||
| NlcsGroupInformation | 1.3.6.1.4.1.2356.14.2.33.3 | |||
| TlcsMVRGroupInfoTable | 1.3.6.1.4.1.2356.14.2.33.3.1 | NA | ||
| RlcsMVRGroupInfoEntry | 1.3.6.1.4.1.2356.14.2.33.3.1.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsMVRGroupInfoIndex | 1.3.6.1.4.1.2356.14.2.33.3.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMVRGroupInfoVLANID | 1.3.6.1.4.1.2356.14.2.33.3.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsMVRGroupInfoGroups | 1.3.6.1.4.1.2356.14.2.33.3.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Groups | ||||
| ClcsMVRGroupInfoPortMembers | 1.3.6.1.4.1.2356.14.2.33.3.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Port Members | ||||
| NlcsMVRSFMInformation | 1.3.6.1.4.1.2356.14.2.33.4 | |||
| TlcsMVRSFMInfoTable | 1.3.6.1.4.1.2356.14.2.33.4.2 | NA | ||
| RlcsMVRSFMInfoEntry | 1.3.6.1.4.1.2356.14.2.33.4.2.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsMVRSFMInfoIndex | 1.3.6.1.4.1.2356.14.2.33.4.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index | ||||
| ClcsMVRSFMInfoVLANID | 1.3.6.1.4.1.2356.14.2.33.4.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current VLAN ID | ||||
| ClcsMVRSFMInfoGroup | 1.3.6.1.4.1.2356.14.2.33.4.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Group | ||||
| ClcsMVRSFMInfoPort | 1.3.6.1.4.1.2356.14.2.33.4.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Port | ||||
| ClcsMVRSFMInfoMode | 1.3.6.1.4.1.2356.14.2.33.4.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Mode 0:Exclude. 1:Include | ||||
| ClcsMVRSFMInfoSourceAddress | 1.3.6.1.4.1.2356.14.2.33.4.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Source Address | ||||
| ClcsMVRSFMInfoType | 1.3.6.1.4.1.2356.14.2.33.4.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Type 0:Deny 1:Allow | ||||
| ClcsMVRSFMInfoHardwareFilterSwitch | 1.3.6.1.4.1.2356.14.2.33.4.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Hardware Filter\Switch 0:No 1:Yes | ||||
| NlcsIPMCLIB | 1.3.6.1.4.1.2356.14.2.34 | |||
| SlcsMulticastFilteringProfileMode | 1.3.6.1.4.1.2356.14.2.34.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current Multicast Filtering Profile Mode. 0:Disable 1:Enable | ||||
| TlcsMulticastFilteringProfileSettingTable | 1.3.6.1.4.1.2356.14.2.34.2 | NA | ||
table · not-accessible · current Multicast Filtering Profile Setting table | ||||
| RlcsMulticastFilteringProfileSettingEntry | 1.3.6.1.4.1.2356.14.2.34.2.1 | NA | ||
row · not-accessible · current Multicast Filtering Profile Setting table. | ||||
| ClcsMulticastFilteringProfileSettingIndex | 1.3.6.1.4.1.2356.14.2.34.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Multicast Filtering Profile Setting index. | ||||
| ClcsMulticastFilteringProfileSettingProfileName | 1.3.6.1.4.1.2356.14.2.34.2.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current Profile Name. Length:1-16 | ||||
| ClcsMulticastFilteringProfileSettingProfileDescription | 1.3.6.1.4.1.2356.14.2.34.2.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current Profile Description. Length:0-64 | ||||
| ClcsMulticastFilteringProfileSettingRowStatus | 1.3.6.1.4.1.2356.14.2.34.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| SlcsMulticastFilteringProfileRuleSettingsProfileNameIndex | 1.3.6.1.4.1.2356.14.2.34.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current Set this Profile Name value before use MulticastFilteringProfileRuleSettingsTable table | ||||
| TlcsMulticastFilteringProfileRuleSettingsTable | 1.3.6.1.4.1.2356.14.2.34.4 | NA | ||
table · not-accessible · current Multicast Filtering Profile Rule Setting table | ||||
| RlcsMulticastFilteringProfileRuleSettingsEntry | 1.3.6.1.4.1.2356.14.2.34.4.1 | NA | ||
row · not-accessible · current Multicast Filtering Profile Rule Setting table. | ||||
| ClcsMulticastFilteringProfileRuleSettingsTableIndex | 1.3.6.1.4.1.2356.14.2.34.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Multicast Filtering Profile Rule Setting index. | ||||
| ClcsMulticastFilteringProfileRuleSettingsProfileName | 1.3.6.1.4.1.2356.14.2.34.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Profile Name | ||||
| ClcsMulticastFilteringProfileRuleSettingsIndex | 1.3.6.1.4.1.2356.14.2.34.4.1.3 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Index | ||||
| ClcsMulticastFilteringProfileRuleSettingsEntryName | 1.3.6.1.4.1.2356.14.2.34.4.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current Entry Name, Length: 1-16 | ||||
| ClcsMulticastFilteringProfileRuleSettingsAddressRange | 1.3.6.1.4.1.2356.14.2.34.4.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Address Range | ||||
| ClcsMulticastFilteringProfileRuleSettingsAction | 1.3.6.1.4.1.2356.14.2.34.4.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current 0:Deny 1:Permit | ||||
| ClcsMulticastFilteringProfileRuleSettingsLog | 1.3.6.1.4.1.2356.14.2.34.4.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current 0:Disable 1:Enable | ||||
| ClcsMulticastFilteringProfileRuleSettingsRowStatus | 1.3.6.1.4.1.2356.14.2.34.4.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| TlcsMulticastFilteringProfileAddressConfigTable | 1.3.6.1.4.1.2356.14.2.34.5 | NA | ||
table · not-accessible · current Multicast Filtering Profile Address Config table | ||||
| RlcsMulticastFilteringProfileAddressConfigEntry | 1.3.6.1.4.1.2356.14.2.34.5.1 | NA | ||
row · not-accessible · current Multicast Filtering Profile Address Config table. | ||||
| ClcsMulticastFilteringProfileAddressConfigTableIndex | 1.3.6.1.4.1.2356.14.2.34.5.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Multicast Filtering Profile Address Config index. | ||||
| ClcsMulticastFilteringProfileAddressConfigEntryName | 1.3.6.1.4.1.2356.14.2.34.5.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current Entry Name, Length: 1-16 | ||||
| ClcsMulticastFilteringProfileAddressConfigStartAddress | 1.3.6.1.4.1.2356.14.2.34.5.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current IPv4/IPv6 Multicast Group Address | ||||
| ClcsMulticastFilteringProfileAddressConfigEndAddress | 1.3.6.1.4.1.2356.14.2.34.5.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current IPv4/IPv6 Multicast Group Address | ||||
| ClcsMulticastFilteringProfileAddressConfigRowStatus | 1.3.6.1.4.1.2356.14.2.34.5.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| NlcsEEE | 1.3.6.1.4.1.2356.14.2.35 | |||
| NlcsPortPowerSavings | 1.3.6.1.4.1.2356.14.2.35.1 | |||
| TlcsEnergyEfficientEthernetConfigTable | 1.3.6.1.4.1.2356.14.2.35.1.2 | NA | ||
| RlcsEnergyEfficientEthernetConfigEntry | 1.3.6.1.4.1.2356.14.2.35.1.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsEnergyEfficientEthernetConfigPort | 1.3.6.1.4.1.2356.14.2.35.1.2.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current Index | ||||
| ClcsEnergyEfficientEthernetConfigPortConfig | 1.3.6.1.4.1.2356.14.2.35.1.2.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Controls whether EEE is enabled for this port. 0:Disable 1:Enable | ||||
| NlcsAggregation | 1.3.6.1.4.1.2356.14.2.36 | |||
| NlcsAggregationStatic | 1.3.6.1.4.1.2356.14.2.36.1 | |||
| SlcsAggrSourceMACAddress | 1.3.6.1.4.1.2356.14.2.36.1.2 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Source MAC Address | ||||
| SlcsAggrDestinationMACAddress | 1.3.6.1.4.1.2356.14.2.36.1.3 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current Destination MAC Address | ||||
| SlcsAggrIPAddress | 1.3.6.1.4.1.2356.14.2.36.1.4 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current IP Address | ||||
| SlcsAggrTCPUDPPortNumber | 1.3.6.1.4.1.2356.14.2.36.1.5 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current TCP/UDP Port Number | ||||
| TlcsAggrGroupConfigTable | 1.3.6.1.4.1.2356.14.2.36.1.6 | NA | ||
| RlcsAggrGroupConfigEntry | 1.3.6.1.4.1.2356.14.2.36.1.6.1 | NA | ||
row · not-accessible · current | ||||
| ClcsAggrGroupConfigPort | 1.3.6.1.4.1.2356.14.2.36.1.6.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port index | ||||
| ClcsAggrGroupConfigGroup | 1.3.6.1.4.1.2356.14.2.36.1.6.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current group index | ||||
| ClcsAggrGroupConfig | 1.3.6.1.4.1.2356.14.2.36.1.6.1.3 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Aggregation Group Configuration | ||||
| NlcsLACPConfiguration | 1.3.6.1.4.1.2356.14.2.36.2 | |||
| TlcsLACPPortConfigTable | 1.3.6.1.4.1.2356.14.2.36.2.1 | NA | ||
| RlcsLACPPortConfigEntry | 1.3.6.1.4.1.2356.14.2.36.2.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsLACPPortConfigPort | 1.3.6.1.4.1.2356.14.2.36.2.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current port index | ||||
| ClcsLACPPortConfigEnabled | 1.3.6.1.4.1.2356.14.2.36.2.1.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Controls whether LACP is enabled on this switch port. 0:Disable 1:Enable | ||||
| ClcsLACPPortConfigKey | 1.3.6.1.4.1.2356.14.2.36.2.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The Key value incurred by the port, range 1-Number of link aggregations. | ||||
| ClcsLACPPortConfigRole | 1.3.6.1.4.1.2356.14.2.36.2.1.1.4 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current The Role shows the LACP activity status. 0:Passive 1:Active | ||||
| ClcsLACPPortConfigTimeout | 1.3.6.1.4.1.2356.14.2.36.2.1.1.5 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current The Timeout controls the period between BPDU transmissions. 0:Slow 1:Fast | ||||
| ClcsLACPPortConfigPrio | 1.3.6.1.4.1.2356.14.2.36.2.1.1.6 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current The Prio controls the priority of the port. | ||||
| NlcsLacpSystemStatus | 1.3.6.1.4.1.2356.14.2.36.3 | |||
| TlcsLacpSystemStatusTable | 1.3.6.1.4.1.2356.14.2.36.3.1 | NA | ||
| RlcsLacpSystemStatusEntry | 1.3.6.1.4.1.2356.14.2.36.3.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsLacpSystemStatusIndex | 1.3.6.1.4.1.2356.14.2.36.3.1.1.1 | Integer32 (1..65536) | NA | |
column · Integer32 (1..65536) · not-accessible · current index | ||||
| ClcsLacpSystemStatusAggrID | 1.3.6.1.4.1.2356.14.2.36.3.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The Aggregation ID associated with this aggregation instance. | ||||
| ClcsLacpSystemStatusPartnerSystemID | 1.3.6.1.4.1.2356.14.2.36.3.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The system ID (MAC address) of the aggregation partner. | ||||
| ClcsLacpSystemStatusPartnerKey | 1.3.6.1.4.1.2356.14.2.36.3.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The Key that the partner has assigned to this aggregation ID. | ||||
| ClcsLacpSystemStatusPartnerPrio | 1.3.6.1.4.1.2356.14.2.36.3.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The priority that the partner has assigned to this aggregation ID. | ||||
| ClcsLacpSystemStatusLastChanged | 1.3.6.1.4.1.2356.14.2.36.3.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The time since this aggregation changed. | ||||
| ClcsLacpSystemStatusLocalPorts | 1.3.6.1.4.1.2356.14.2.36.3.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Shows which ports are a part of this aggregation for this switch. | ||||
| NlcsLACPInternalPortStatus | 1.3.6.1.4.1.2356.14.2.36.4 | |||
| TlcsLACPInternalPortStatusTable | 1.3.6.1.4.1.2356.14.2.36.4.1 | NA | ||
| RlcsLACPInternalPortStatusEntry | 1.3.6.1.4.1.2356.14.2.36.4.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsLACPInternalPortStatusIndex | 1.3.6.1.4.1.2356.14.2.36.4.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current index | ||||
| ClcsLACPInternalPortStatusPort | 1.3.6.1.4.1.2356.14.2.36.4.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The switch port number. | ||||
| ClcsLACPInternalPortStatusState | 1.3.6.1.4.1.2356.14.2.36.4.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The current port state: Down: The port is not active. Active: The port is in active state. Standby: The port is in standby state. | ||||
| ClcsLACPInternalPortStatusKey | 1.3.6.1.4.1.2356.14.2.36.4.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The key assigned to this port. Only ports with the same key can aggregate together. | ||||
| ClcsLACPInternalPortStatusPriority | 1.3.6.1.4.1.2356.14.2.36.4.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The priority assigned to this aggregation group. | ||||
| ClcsLACPInternalPortStatusActivity | 1.3.6.1.4.1.2356.14.2.36.4.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The LACP mode of the group (Active or Passive). | ||||
| ClcsLACPInternalPortStatusTimeout | 1.3.6.1.4.1.2356.14.2.36.4.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The timeout mode configured for the port (Fast or Slow). | ||||
| ClcsLACPInternalPortStatusAggregation | 1.3.6.1.4.1.2356.14.2.36.4.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Show whether the system considers this link to be aggregateable. i.e., a potential candidate for aggregation. | ||||
| ClcsLACPInternalPortStatusSynchronization | 1.3.6.1.4.1.2356.14.2.36.4.1.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current Show whether the system considers this link to be IN_SYNC. | ||||
| ClcsLACPInternalPortStatusCollecting | 1.3.6.1.4.1.2356.14.2.36.4.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Show if collection of incoming frames on this link is enabled. | ||||
| ClcsLACPInternalPortStatusDistributing | 1.3.6.1.4.1.2356.14.2.36.4.1.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current Show if distribution of outgoing frames on this link is enabled. | ||||
| ClcsLACPInternalPortStatusDefaulted | 1.3.6.1.4.1.2356.14.2.36.4.1.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current Show if the Actor's Receive machine is using Defaulted operational Partner information. | ||||
| ClcsLACPInternalPortStatusExpired | 1.3.6.1.4.1.2356.14.2.36.4.1.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current Show if that the Actor's Receive machine is in the EXPIRED state. | ||||
| NlcsLACPNeighborPortStatus | 1.3.6.1.4.1.2356.14.2.36.5 | |||
| TlcsLACPNeighborPortStatusTable | 1.3.6.1.4.1.2356.14.2.36.5.1 | NA | ||
| RlcsLACPNeighborPortStatusEntry | 1.3.6.1.4.1.2356.14.2.36.5.1.1 | NA | ||
row · not-accessible · current | ||||
| ClcsLACPNeighborPortStatusIndex | 1.3.6.1.4.1.2356.14.2.36.5.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current index | ||||
| ClcsLACPNeighborPortStatusPort | 1.3.6.1.4.1.2356.14.2.36.5.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The switch port number. | ||||
| ClcsLACPNeighborPortStatusState | 1.3.6.1.4.1.2356.14.2.36.5.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The current port state: Down: The port is not active. Active: The port is in active state. Standby: The port is in standby state. | ||||
| ClcsLACPNeighborPortStatusAggrID | 1.3.6.1.4.1.2356.14.2.36.5.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The aggregation group ID which the port is assigned to. | ||||
| ClcsLACPNeighborPortStatusPartnerKey | 1.3.6.1.4.1.2356.14.2.36.5.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The key assigned to this port by the partner. | ||||
| ClcsLACPNeighborPortStatusPartnerPort | 1.3.6.1.4.1.2356.14.2.36.5.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The partner port number associated with this link. | ||||
| ClcsLACPNeighborPortStatusPartnerPortPrio | 1.3.6.1.4.1.2356.14.2.36.5.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The priority assigned to this partner port . | ||||
| ClcsLACPNeighborPortStatusActivity | 1.3.6.1.4.1.2356.14.2.36.5.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The LACP mode of the group (Active or Passive). | ||||
| ClcsLACPNeighborPortStatusTimeout | 1.3.6.1.4.1.2356.14.2.36.5.1.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current The timeout mode configured for the partner port (Fast or Slow). | ||||
| ClcsLACPNeighborPortStatusAggregation | 1.3.6.1.4.1.2356.14.2.36.5.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Show whether the partner considers this link to be aggregateable. | ||||
| ClcsLACPNeighborPortStatusSynchronization | 1.3.6.1.4.1.2356.14.2.36.5.1.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current Show whether the partner considers this link to be IN_SYNC | ||||
| ClcsLACPNeighborPortStatusCollecting | 1.3.6.1.4.1.2356.14.2.36.5.1.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current Show if collection of incoming frames on this link is enabled. | ||||
| ClcsLACPNeighborPortStatusDistributing | 1.3.6.1.4.1.2356.14.2.36.5.1.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current Show if distribution of outgoing frames on this link is enabled. | ||||
| ClcsLACPNeighborPortStatusDefaulted | 1.3.6.1.4.1.2356.14.2.36.5.1.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current Show if the partners Receive machine is using Defaulted operational Partner information. | ||||
| ClcsLACPNeighborPortStatusExpired | 1.3.6.1.4.1.2356.14.2.36.5.1.1.15 | DisplayString | RO | |
column · DisplayString · read-only · current Show if that the partners Receive machine is in the EXPIRED state. | ||||
| NlcsLACPStatus | 1.3.6.1.4.1.2356.14.2.36.6 | |||
| TlcsLACPStatusTable | 1.3.6.1.4.1.2356.14.2.36.6.1 | NA | ||
| RlcsLACPStatusEntry | 1.3.6.1.4.1.2356.14.2.36.6.1.1 | NA | ||
row · not-accessible · current
| ||||
| ClcsLACPStatusPort | 1.3.6.1.4.1.2356.14.2.36.6.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current index | ||||
| ClcsLACPStatusLACP | 1.3.6.1.4.1.2356.14.2.36.6.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Yes: means that LACP is enabled and the port link is up. No: means that LACP is not enabled or that the port link is down. Backup: means that the port could not join the aggregation group but will join if other port leaves. Meanwhile it's LACP status is disabled. | ||||
| ClcsLACPStatusKey | 1.3.6.1.4.1.2356.14.2.36.6.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The key assigned to this port. Only ports with the same key can aggregate together. | ||||
| ClcsLACPStatusAggrID | 1.3.6.1.4.1.2356.14.2.36.6.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The Aggregation ID assigned to this aggregation group. | ||||
| ClcsLACPStatusPartnerSystemID | 1.3.6.1.4.1.2356.14.2.36.6.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The partner's System ID (MAC address). | ||||
| ClcsLACPStatusPartnerPort | 1.3.6.1.4.1.2356.14.2.36.6.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The partner's port number connected to this port. | ||||
| ClcsLACPStatusPartnerPrio | 1.3.6.1.4.1.2356.14.2.36.6.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The partner's port priority. | ||||
| NlcsLMC | 1.3.6.1.4.1.2356.14.2.1500 | |||
| SlcsLMCOperating | 1.3.6.1.4.1.2356.14.2.1500.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current LMC Operating Switch 0:Disable 1:Enable 2:Try | ||||
| SlcsLMCConfigViaDHCP | 1.3.6.1.4.1.2356.14.2.1500.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Enables LMC configuration via DHCP option 43 0:Disable 1:Enable | ||||
| SlcsLMCDomain | 1.3.6.1.4.1.2356.14.2.1500.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current LMC Domain for example cloud.lancom.de | ||||
| SlcsLMCAutoRenew | 1.3.6.1.4.1.2356.14.2.1500.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Renew DHCP lease early when connection to LMC is not possible 0:Disabled 1:Enabled | ||||
| SlcsLMCRolloutProjectID | 1.3.6.1.4.1.2356.14.2.1500.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current LMC Project rollout information string | ||||
| SlcsLMCRolloutLocationID | 1.3.6.1.4.1.2356.14.2.1500.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current LMC Location rollout information string | ||||
| SlcsLMCRolloutRole | 1.3.6.1.4.1.2356.14.2.1500.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current LMC Role rollout information string | ||||
| SlcsLMCZeroTouchSupport | 1.3.6.1.4.1.2356.14.2.1500.50 | Integer32 | RO | |
scalar · Integer32 · read-only · current Support for Zero Touch 0:No 1:Yes | ||||
| SlcsLMCPairingTokenPresent | 1.3.6.1.4.1.2356.14.2.1500.51 | Integer32 | RO | |
scalar · Integer32 · read-only · current Paring Token present 0:No 1:Yes | ||||
| SlcsLMCManagementStatus | 1.3.6.1.4.1.2356.14.2.1500.53 | Integer32 | RO | |
scalar · Integer32 · read-only · current 0:Unpaired 1:Paired 2:Disabled 3:DisabledByWLC 4:Operating 5:HTTPProtocolError 6:HTTPConnectionError 7:DNSError 8:MemoryError 9:NotYet 10:Redirect 11:AuthenticationError 12:Error 13:CertificateStorageError 14:PairedAndClaimed 15:CertificateError 16:DeactivatedNoActivationCode | ||||
| SlcsLMCControlStatus | 1.3.6.1.4.1.2356.14.2.1500.54 | Integer32 | RO | |
scalar · Integer32 · read-only · current 0:Unpaired 1:Paired 2:Disabled 3:DisabledByWLC 4:Operating 5:HTTPProtocolError 6:HTTPConnectionError 7:DNSError 8:MemoryError 9:NotYet 10:Redirect 11:AuthenticationError 12:Error 13:CertificateStorageError 14:PairedAndClaimed 15:CertificateError 16:DeactivatedNoActivationCode | ||||
| SlcsLMCMonitoringStatus | 1.3.6.1.4.1.2356.14.2.1500.55 | Integer32 | RO | |
scalar · Integer32 · read-only · current 0:Unpaired 1:Paired 2:Disabled 3:DisabledByWLC 4:Operating 5:HTTPProtocolError 6:HTTPConnectionError 7:DNSError 8:MemoryError 9:NotYet 10:Redirect 11:AuthenticationError 12:Error 13:CertificateStorageError 14:PairedAndClaimed 15:CertificateError 16:DeactivatedNoActivationCode | ||||
| SlcsLMCConfigModified | 1.3.6.1.4.1.2356.14.2.1500.57 | Integer32 | RO | |
scalar · Integer32 · read-only · current Configuration modified by LMC 0:No 1:Yes | ||||
| SlcsLMCDeviceID | 1.3.6.1.4.1.2356.14.2.1500.58 | DisplayString | RO | |
scalar · DisplayString · read-only · current Device ID | ||||
| SlcsLMCStatusRTT | 1.3.6.1.4.1.2356.14.2.1500.100 | Integer32 | RO | |
scalar · Integer32 · read-only · current Heartbeat round trip time | ||||
| TlcsLMCTransportStatusTable | 1.3.6.1.4.1.2356.14.2.1500.101 | NA | ||
table · not-accessible · current Transport status | ||||
| RlcsLMCTransportStatusTableEntry | 1.3.6.1.4.1.2356.14.2.1500.101.1 | NA | ||
| ClcsLMCTransportStatusTransportNumberIndex | 1.3.6.1.4.1.2356.14.2.1500.101.1.1 | Integer32 | NA | |
| ClcsLMCTransportStatusServiceName | 1.3.6.1.4.1.2356.14.2.1500.101.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Service name | ||||
| ClcsLMCTransportStatusHttpRequests | 1.3.6.1.4.1.2356.14.2.1500.101.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current Number of Http requests | ||||
| ClcsLMCTransportStatusHttpRequestsErrors | 1.3.6.1.4.1.2356.14.2.1500.101.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Number of Http request errors | ||||
| ClcsLMCTransportStatusTXBytes | 1.3.6.1.4.1.2356.14.2.1500.101.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Number of transmitted bytes | ||||
| ClcsLMCTransportStatusRXBytes | 1.3.6.1.4.1.2356.14.2.1500.101.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Number of received bytes | ||||
| NlcsRolloutAgent | 1.3.6.1.4.1.2356.14.2.1501 | |||
| SlcsRolloutAgentOperating | 1.3.6.1.4.1.2356.14.2.1501.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current Rollout Agent Operating Switch 0:Disable 1:Enable 2:Only-Unconfigured | ||||
| SlcsRolloutAgentActive | 1.3.6.1.4.1.2356.14.2.1501.100 | Integer32 | RO | |
scalar · Integer32 · read-only · current Rollout Agent Active 0:No 1:Yes 2:Deactivated | ||||
| SlcsRolloutAgentLastRequestStatus | 1.3.6.1.4.1.2356.14.2.1501.101 | Integer32 | RO | |
scalar · Integer32 · read-only · current Rollout Agent Last Request Status 0:NoError, 1:DnsError, 2:ProtocolError, 3:ConnectionError, 4:MissingOrInvalidConfig | ||||
| SlcsRolloutAgentLastRequestTimestamp | 1.3.6.1.4.1.2356.14.2.1501.102 | Counter64 | RO | |
scalar · Counter64 · read-only · current Rollout Agent Last Request Timestamp | ||||
| SlcsRolloutAgentActiveHeartbeatUrl | 1.3.6.1.4.1.2356.14.2.1501.103 | DisplayString | RO | |
scalar · DisplayString · read-only · current Active Heartbeat Url | ||||
| SlcsRolloutAgentActiveProjectId | 1.3.6.1.4.1.2356.14.2.1501.104 | DisplayString | RO | |
scalar · DisplayString · read-only · current Rollout Agent Active Project ID | ||||
| SlcsRolloutAgentActiveLocationId | 1.3.6.1.4.1.2356.14.2.1501.105 | DisplayString | RO | |
scalar · DisplayString · read-only · current Rollout Agent Active Location ID | ||||
| SlcsRolloutAgentActiveTan | 1.3.6.1.4.1.2356.14.2.1501.106 | DisplayString | RO | |
scalar · DisplayString · read-only · current Rollout Agent Active TAN | ||||
| NlcsSecurity | 1.3.6.1.4.1.2356.14.3 | |||
| NlcsIPSourceGuard | 1.3.6.1.4.1.2356.14.3.1 | |||
| NlcsIPSourceGuardConf | 1.3.6.1.4.1.2356.14.3.1.1 | |||
| SlcsIPSourceGuardMode | 1.3.6.1.4.1.2356.14.3.1.1.1 | AdminMode | RW | |
scalar · AdminMode · read-write · current Enable the Global IP Source Guard or disable the Global IP Source Guard. | ||||
| SlcsIPSourceGuardDynamicToStaticCmd | 1.3.6.1.4.1.2356.14.3.1.1.2 | ActivateCmd | RW | |
scalar · ActivateCmd · read-write · current Translate all dynamic entries to static entries. | ||||
| TlcsIPSourceGuardPortConfigTable | 1.3.6.1.4.1.2356.14.3.1.1.3 | NA | ||
table · not-accessible · current The IP Source Guard Port Configuration Table. INDEX for this table is ifIndex which is equivalent to the panel port number. | ||||
| RlcsIPSourceGuardPortConfigEntry | 1.3.6.1.4.1.2356.14.3.1.1.3.1 | NA | ||
| ClcsIPSourceGuardPortConfigMode | 1.3.6.1.4.1.2356.14.3.1.1.3.1.2 | AdminMode | RW | |
column · AdminMode · read-write · current Specify IP Source Guard is enabled on which ports. | ||||
| ClcsIPSourceGuardPortMaxDynamicClients | 1.3.6.1.4.1.2356.14.3.1.1.3.1.3 | Integer32 (0..2 | 99) | RW | |
column · Integer32 (0..2 | 99) · read-write · current Specify the maximum number of dynamic clients that can be learned on given port. default: 99 0~2: Max Dynamic clients 99:Unlimited | ||||
| TlcsIPSourceGuardStaticTable | 1.3.6.1.4.1.2356.14.3.1.2 | NA | ||
table · not-accessible · current The IP Source Guard Static Table. | ||||
| RlcsIPSourceGuardStaticEntry | 1.3.6.1.4.1.2356.14.3.1.2.1 | NA | ||
| ClcsIPSourceGuardStaticSwitchIndex | 1.3.6.1.4.1.2356.14.3.1.2.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Switch Index. | ||||
| ClcsIPSourceGuardStaticIndex | 1.3.6.1.4.1.2356.14.3.1.2.1.2 | Integer32 (1..28) | NA | |
column · Integer32 (1..28) · not-accessible · current The entry of table. | ||||
| ClcsIPSourceGuardStaticPort | 1.3.6.1.4.1.2356.14.3.1.2.1.3 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current The port number of table. range: 1 - port number. | ||||
| ClcsIPSourceGuardStaticVLANId | 1.3.6.1.4.1.2356.14.3.1.2.1.4 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current VLAN ID, range: 1 - 4094. | ||||
| ClcsIPSourceGuardStaticIPAddress | 1.3.6.1.4.1.2356.14.3.1.2.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current IP address allowed for doing IP source guard. | ||||
| ClcsIPSourceGuardStaticMACAddress | 1.3.6.1.4.1.2356.14.3.1.2.1.7 | DisplayString | RC | |
column · DisplayString · read-create · current Allowed Source MAC address, format: 0a 1b 2c 3d 4e 5f. | ||||
| ClcsIPSourceGuardStaticRowStatus | 1.3.6.1.4.1.2356.14.3.1.2.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsIPSourceGuardDynamicTable | 1.3.6.1.4.1.2356.14.3.1.3 | NA | ||
table · not-accessible · current The IP Source Guard Dynamic Table. | ||||
| RlcsIPSourceGuardDynamicEntry | 1.3.6.1.4.1.2356.14.3.1.3.1 | NA | ||
| ClcsIPSourceGuardDynamicSwitchIndex | 1.3.6.1.4.1.2356.14.3.1.3.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Switch Index. | ||||
| ClcsIPSourceGuardDynamicIndex | 1.3.6.1.4.1.2356.14.3.1.3.1.2 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The entry of table. | ||||
| ClcsIPSourceGuardDynamicPort | 1.3.6.1.4.1.2356.14.3.1.3.1.3 | Integer32 (1..255) | RO | |
column · Integer32 (1..255) · read-only · current The logical port for the settings. | ||||
| ClcsIPSourceGuardDynamicVLANId | 1.3.6.1.4.1.2356.14.3.1.3.1.4 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current The vlan id for the settings. | ||||
| ClcsIPSourceGuardDynamicIPAddress | 1.3.6.1.4.1.2356.14.3.1.3.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current Allowed Source IP address. | ||||
| ClcsIPSourceGuardDynamicMACAddress | 1.3.6.1.4.1.2356.14.3.1.3.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Allowed Source MAC address. | ||||
| NlcsARPInspection | 1.3.6.1.4.1.2356.14.3.2 | |||
| NlcsARP | 1.3.6.1.4.1.2356.14.3.2.1 | |||
| NlcsARPConfig | 1.3.6.1.4.1.2356.14.3.2.1.1 | |||
| SlcsARPConfMode | 1.3.6.1.4.1.2356.14.3.2.1.1.1 | AdminMode | RW | |
scalar · AdminMode · read-write · current Enable the Global ARP Inspection or disable the Global ARP Inspection. | ||||
| TlcsARPPortConfTable | 1.3.6.1.4.1.2356.14.3.2.1.1.3 | NA | ||
table · not-accessible · current The ARP Port Configuration Table. | ||||
| RlcsARPPortConfEntry | 1.3.6.1.4.1.2356.14.3.2.1.1.3.1 | NA | ||
| ClcsARPPortConfPort | 1.3.6.1.4.1.2356.14.3.2.1.1.3.1.1 | Integer32 (1..255) | NA | |
column · Integer32 (1..255) · not-accessible · current The port number for which the configuration below applies. range: 1 - port number. | ||||
| ClcsARPPortConfMode | 1.3.6.1.4.1.2356.14.3.2.1.1.3.1.2 | AdminMode | RW | |
column · AdminMode · read-write · current Specify ARP Inspection is enabled on which ports. | ||||
| ClcsARPPortConfCheckVLAN | 1.3.6.1.4.1.2356.14.3.2.1.1.3.1.3 | AdminMode | RW | |
column · AdminMode · read-write · current When the setting of 'Check VLAN' is disabled, the log type of ARP Inspection will refer to the port setting. And the setting of 'Check VLAN' is enabled, the log type of ARP Inspection will refer to the VLAN setting. | ||||
| ClcsARPPortConfLogType | 1.3.6.1.4.1.2356.14.3.2.1.1.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The log type of ARP Inspection will refer to the port setting. 0: none, 1: deny, 2: permit, 3: all, range: 0-3.
| ||||
| TlcsARPVlanConfigTable | 1.3.6.1.4.1.2356.14.3.2.1.2 | NA | ||
table · not-accessible · current The ARP Vlan Configuration Table. | ||||
| RlcsARPVlanConfigEntry | 1.3.6.1.4.1.2356.14.3.2.1.2.1 | NA | ||
| ClcsARPPortConfigIndex | 1.3.6.1.4.1.2356.14.3.2.1.2.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The Index of Vlan config Table | ||||
| ClcsARPVlanConfigVlan | 1.3.6.1.4.1.2356.14.3.2.1.2.1.2 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current Specify ARP Inspection is enabled on which VLANs. range: 1 - 4094. | ||||
| ClcsARPVlanConfigLogType | 1.3.6.1.4.1.2356.14.3.2.1.2.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The log type also can be configured on per VLAN setting. 0: none, 1: deny, 2: permit, 3: all, range: 0-3.
| ||||
| ClcsARPVlanConfigRowStatus | 1.3.6.1.4.1.2356.14.3.2.1.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsARPStaticTable | 1.3.6.1.4.1.2356.14.3.2.1.3 | NA | ||
table · not-accessible · current The ARP Static Table. | ||||
| RlcsARPStaticEntry | 1.3.6.1.4.1.2356.14.3.2.1.3.1 | NA | ||
| ClcsARPStaticSwitchIndex | 1.3.6.1.4.1.2356.14.3.2.1.3.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Switch Index. | ||||
| ClcsARPStaticIndex | 1.3.6.1.4.1.2356.14.3.2.1.3.1.2 | Integer32 (1..255) | NA | |
column · Integer32 (1..255) · not-accessible · current The entry of table. | ||||
| ClcsARPStaticPort | 1.3.6.1.4.1.2356.14.3.2.1.3.1.3 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current The logical port for the settings. range: 1 - port number. | ||||
| ClcsARPStaticVlanID | 1.3.6.1.4.1.2356.14.3.2.1.3.1.4 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current The vlan id for the settings. range: 1-4094. | ||||
| ClcsARPStaticMACAddress | 1.3.6.1.4.1.2356.14.3.2.1.3.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current Allowed Source MAC address in ARP request packets. | ||||
| ClcsARPStaticIPAddress | 1.3.6.1.4.1.2356.14.3.2.1.3.1.6 | IpAddress | RC | |
column · IpAddress · read-create · current Allowed Source IP address in ARP request packets. | ||||
| ClcsARPStaticRowStatus | 1.3.6.1.4.1.2356.14.3.2.1.3.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| TlcsARPDynamicTable | 1.3.6.1.4.1.2356.14.3.2.1.4 | NA | ||
table · not-accessible · current The ARP Dynamic Table. | ||||
| RlcsARPDynamicEntry | 1.3.6.1.4.1.2356.14.3.2.1.4.1 | NA | ||
| ClcsARPDynamicIndex | 1.3.6.1.4.1.2356.14.3.2.1.4.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The entry of table. | ||||
| ClcsARPDynamicPort | 1.3.6.1.4.1.2356.14.3.2.1.4.1.2 | Integer32 (1..255) | RO | |
column · Integer32 (1..255) · read-only · current Switch Port Number for which the entries are displayed. | ||||
| ClcsARPDynamicVLANId | 1.3.6.1.4.1.2356.14.3.2.1.4.1.3 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current VLAN-ID in which the ARP traffic is permitted. | ||||
| ClcsARPDynamicMACAddress | 1.3.6.1.4.1.2356.14.3.2.1.4.1.4 | MacAddress | RO | |
column · MacAddress · read-only · current User MAC address of the entry. | ||||
| ClcsARPDynamicIPAddress | 1.3.6.1.4.1.2356.14.3.2.1.4.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current User IP address of the entry. | ||||
| ClcsARPDynamicToStaticCmd | 1.3.6.1.4.1.2356.14.3.2.1.4.1.6 | ActivateCmd | RW | |
column · ActivateCmd · read-write · current Enable the Global ARP Inspection or disable the Global ARP Inspection. | ||||
| NlcsARPConformance | 1.3.6.1.4.1.2356.14.3.2.200 | |||
| NlcsARPCompliances | 1.3.6.1.4.1.2356.14.3.2.200.1 | |||
| NlcsARPGroups | 1.3.6.1.4.1.2356.14.3.2.200.2 | |||
| GlcsARPGroup | 1.3.6.1.4.1.2356.14.3.2.200.2.1 | |||
group · current The collection of objects which are used to indicate lcs ARP information.
| ||||
| NlcsDHCPSnooping | 1.3.6.1.4.1.2356.14.3.3 | |||
| NlcsDHCPSnoopingConf | 1.3.6.1.4.1.2356.14.3.3.1 | |||
| SlcsDHCPSnoopingMode | 1.3.6.1.4.1.2356.14.3.3.1.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current default: 0 0: disable 1: enable | ||||
| TlcsDHCPSnoopingPortModeConfigurationTable | 1.3.6.1.4.1.2356.14.3.3.1.2 | NA | ||
| RlcsDHCPSnoopingPortModeConfigurationEntry | 1.3.6.1.4.1.2356.14.3.3.1.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsDHCPSnoopingPortModeConfigurationPort | 1.3.6.1.4.1.2356.14.3.3.1.2.1.1 | Integer32 (1..4094) | NA | |
| ClcsDHCPSnoopingPortModeConfigurationMode | 1.3.6.1.4.1.2356.14.3.3.1.2.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current default: 1 0: trust port mode 1: untrust port mode | ||||
| TlcsDHCPSnoopingStatisticsTable | 1.3.6.1.4.1.2356.14.3.3.2 | NA | ||
| RlcsDHCPSnoopingStatisticsEntry | 1.3.6.1.4.1.2356.14.3.3.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsDHCPSnoopingStatisticsPort | 1.3.6.1.4.1.2356.14.3.3.2.1.1 | Integer32 (1..4094) | NA | |
| ClcsDHCPSnoopingStatisticsClear | 1.3.6.1.4.1.2356.14.3.3.2.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current default: 0 0: none 1: clear | ||||
| ClcsDHCPSnoopingRxDiscover | 1.3.6.1.4.1.2356.14.3.3.2.1.3 | Counter32 | RO | |
| ClcsDHCPSnoopingRxOffer | 1.3.6.1.4.1.2356.14.3.3.2.1.4 | Counter32 | RO | |
| ClcsDHCPSnoopingRxRequest | 1.3.6.1.4.1.2356.14.3.3.2.1.5 | Counter32 | RO | |
| ClcsDHCPSnoopingRxDecline | 1.3.6.1.4.1.2356.14.3.3.2.1.6 | Counter32 | RO | |
| ClcsDHCPSnoopingRxACK | 1.3.6.1.4.1.2356.14.3.3.2.1.7 | Counter32 | RO | |
| ClcsDHCPSnoopingRxNAK | 1.3.6.1.4.1.2356.14.3.3.2.1.8 | Counter32 | RO | |
| ClcsDHCPSnoopingRxRelease | 1.3.6.1.4.1.2356.14.3.3.2.1.9 | Counter32 | RO | |
| ClcsDHCPSnoopingRxInform | 1.3.6.1.4.1.2356.14.3.3.2.1.10 | Counter32 | RO | |
| ClcsDHCPSnoopingRxLeaseQuery | 1.3.6.1.4.1.2356.14.3.3.2.1.11 | Counter32 | RO | |
| ClcsDHCPSnoopingRxLeaseUnassigned | 1.3.6.1.4.1.2356.14.3.3.2.1.12 | Counter32 | RO | |
| ClcsDHCPSnoopingRxLeaseUnknown | 1.3.6.1.4.1.2356.14.3.3.2.1.13 | Counter32 | RO | |
| ClcsDHCPSnoopingRxLeaseActive | 1.3.6.1.4.1.2356.14.3.3.2.1.14 | Counter32 | RO | |
| ClcsDHCPSnoopingTxDiscover | 1.3.6.1.4.1.2356.14.3.3.2.1.15 | Counter32 | RO | |
| ClcsDHCPSnoopingTxOffer | 1.3.6.1.4.1.2356.14.3.3.2.1.16 | Counter32 | RO | |
| ClcsDHCPSnoopingTxRequest | 1.3.6.1.4.1.2356.14.3.3.2.1.17 | Counter32 | RO | |
| ClcsDHCPSnoopingTxDecline | 1.3.6.1.4.1.2356.14.3.3.2.1.18 | Counter32 | RO | |
| ClcsDHCPSnoopingTxACK | 1.3.6.1.4.1.2356.14.3.3.2.1.19 | Counter32 | RO | |
| ClcsDHCPSnoopingTxNAK | 1.3.6.1.4.1.2356.14.3.3.2.1.20 | Counter32 | RO | |
| ClcsDHCPSnoopingTxRelease | 1.3.6.1.4.1.2356.14.3.3.2.1.21 | Counter32 | RO | |
| ClcsDHCPSnoopingTxInform | 1.3.6.1.4.1.2356.14.3.3.2.1.22 | Counter32 | RO | |
| ClcsDHCPSnoopingTxLeaseQuery | 1.3.6.1.4.1.2356.14.3.3.2.1.23 | Counter32 | RO | |
| ClcsDHCPSnoopingTxLeaseUnassigned | 1.3.6.1.4.1.2356.14.3.3.2.1.24 | Counter32 | RO | |
| ClcsDHCPSnoopingTxLeaseUnknown | 1.3.6.1.4.1.2356.14.3.3.2.1.25 | Counter32 | RO | |
| ClcsDHCPSnoopingTxLeaseActive | 1.3.6.1.4.1.2356.14.3.3.2.1.26 | Counter32 | RO | |
| ClcsDHCPSnoopingRxDiscardedChecksumError | 1.3.6.1.4.1.2356.14.3.3.2.1.27 | Counter32 | RO | |
| ClcsDHCPSnoopingRxDiscardedFromUntrusted | 1.3.6.1.4.1.2356.14.3.3.2.1.28 | Counter32 | RO | |
| NlcsDHCPRelay | 1.3.6.1.4.1.2356.14.3.4 | |||
| NlcsDHCPRelayConfiguration | 1.3.6.1.4.1.2356.14.3.4.1 | |||
| SlcsDHCPRelayMode | 1.3.6.1.4.1.2356.14.3.4.1.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current default: 0 0: disable 1: enable We need at least one server | ||||
| SlcsDHCPRelayServer | 1.3.6.1.4.1.2356.14.3.4.1.2 | IpAddress | RW | |
| SlcsDHCPRelayInformationMode | 1.3.6.1.4.1.2356.14.3.4.1.3 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current default: 0 0: disable 1: enable | ||||
| SlcsDHCPRelayInformationPolicy | 1.3.6.1.4.1.2356.14.3.4.1.4 | Integer32 (0..2) | RW | |
scalar · Integer32 (0..2) · read-write · current default: 0 0: replace 1: keep 2: drop | ||||
| NlcsDHCPRelayStatistics | 1.3.6.1.4.1.2356.14.3.4.2 | |||
| NlcsDHCPRelayServerStatistics | 1.3.6.1.4.1.2356.14.3.4.2.1 | |||
| SlcsServerStatTransmitToServer | 1.3.6.1.4.1.2356.14.3.4.2.1.1 | Counter32 | RO | |
| SlcsServerStatTransmitError | 1.3.6.1.4.1.2356.14.3.4.2.1.2 | Counter32 | RO | |
| SlcsServerStatReceiveFromServer | 1.3.6.1.4.1.2356.14.3.4.2.1.3 | Counter32 | RO | |
| SlcsServerStatReceiveMissingAgentOption | 1.3.6.1.4.1.2356.14.3.4.2.1.4 | Counter32 | RO | |
| SlcsServerStatReceiveMissingCircuitID | 1.3.6.1.4.1.2356.14.3.4.2.1.5 | Counter32 | RO | |
| SlcsServerStatReceiveMissingRemoteID | 1.3.6.1.4.1.2356.14.3.4.2.1.6 | Counter32 | RO | |
| SlcsServerStatReceiveBadCircuitID | 1.3.6.1.4.1.2356.14.3.4.2.1.7 | Counter32 | RO | |
| SlcsServerStatReceiveBadRemoteID | 1.3.6.1.4.1.2356.14.3.4.2.1.8 | Counter32 | RO | |
| NlcsDHCPRelayClientStatistics | 1.3.6.1.4.1.2356.14.3.4.2.2 | |||
| SlcsClientStatTransmitToClient | 1.3.6.1.4.1.2356.14.3.4.2.2.1 | Counter32 | RO | |
| SlcsClientStatTransmitError | 1.3.6.1.4.1.2356.14.3.4.2.2.2 | Counter32 | RO | |
| SlcsClientStatReceivefromClient | 1.3.6.1.4.1.2356.14.3.4.2.2.3 | Counter32 | RO | |
| SlcsClientStatReceiveAgentOption | 1.3.6.1.4.1.2356.14.3.4.2.2.4 | Counter32 | RO | |
| SlcsClientStatReplaceAgentOption | 1.3.6.1.4.1.2356.14.3.4.2.2.5 | Counter32 | RO | |
| SlcsClientStatKeepAgentOption | 1.3.6.1.4.1.2356.14.3.4.2.2.6 | Counter32 | RO | |
| SlcsClientStatDropAgentOption | 1.3.6.1.4.1.2356.14.3.4.2.2.7 | Counter32 | RO | |
| NlcsPortSecurity | 1.3.6.1.4.1.2356.14.3.5 | |||
| NlcsPortSecLimitCtrl | 1.3.6.1.4.1.2356.14.3.5.1 | |||
| NlcsPortSecLimitCtrlSystemConf | 1.3.6.1.4.1.2356.14.3.5.1.1 | |||
| SlcsPortSecurityAging | 1.3.6.1.4.1.2356.14.3.5.1.1.1 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current default: 0 0: disable 1: enable | ||||
| SlcsPortSecurityAgingPeriod | 1.3.6.1.4.1.2356.14.3.5.1.1.2 | Integer32 (10..10000000) | RW | |
scalar · Integer32 (10..10000000) · read-write · current default: 3600, range: 10-10000000 | ||||
| SlcsPortSecurityHoldTime | 1.3.6.1.4.1.2356.14.3.5.1.1.3 | Integer32 (10..10000000) | RW | |
scalar · Integer32 (10..10000000) · read-write · current default: 300, range: 10-10000000 | ||||
| TlcsPortSecLimitCtrlTable | 1.3.6.1.4.1.2356.14.3.5.1.2 | NA | ||
| RlcsPortSecLimitCtrlEntry | 1.3.6.1.4.1.2356.14.3.5.1.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPortSecLimitCtrlPort | 1.3.6.1.4.1.2356.14.3.5.1.2.1.1 | Integer32 (1..65535) | NA | |
| ClcsPortSecLimitCtrlPortMode | 1.3.6.1.4.1.2356.14.3.5.1.2.1.2 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current default: 0 0: disable 1: enable | ||||
| ClcsPortSecLimitCtrlPortLimit | 1.3.6.1.4.1.2356.14.3.5.1.2.1.3 | Integer32 (1..1024) | RW | |
column · Integer32 (1..1024) · read-write · current default: 4, range: 1-1024 | ||||
| ClcsPortSecLimitCtrlPortViolationmMode | 1.3.6.1.4.1.2356.14.3.5.1.2.1.4 | Integer32 (0..2) | RW | |
column · Integer32 (0..2) · read-write · current default: 0 0: Protect 1: Restrict 2: Shutdown | ||||
| ClcsPortSecLimitCtrlPortViolationmLimit | 1.3.6.1.4.1.2356.14.3.5.1.2.1.5 | Integer32 (1..1024) | RW | |
column · Integer32 (1..1024) · read-write · current default: 4, range: 1-1024 | ||||
| ClcsPortSecLimitCtrlPortState | 1.3.6.1.4.1.2356.14.3.5.1.2.1.6 | DisplayString | RO | |
| ClcsPortSecLimitCtrlPortReOpen | 1.3.6.1.4.1.2356.14.3.5.1.2.1.7 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current default: 0 0: none 1: reopen | ||||
| ClcsPortSecLimitCtrlPortSticky | 1.3.6.1.4.1.2356.14.3.5.1.2.1.8 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current default: 0 0: disable 1: enable | ||||
| ClcsPortSecLimitCtrlPortClear | 1.3.6.1.4.1.2356.14.3.5.1.2.1.9 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current default: 0 1: clear | ||||
| TlcsPortSecSwitchStatusTable | 1.3.6.1.4.1.2356.14.3.5.2 | NA | ||
| RlcsPortSecSwitchStatusEntry | 1.3.6.1.4.1.2356.14.3.5.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPortSecSwitchStatusPort | 1.3.6.1.4.1.2356.14.3.5.2.1.1 | Integer32 (1..65535) | NA | |
| ClcsPortSecSwitchStatusViolationmMode | 1.3.6.1.4.1.2356.14.3.5.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Shows the configured Violation Mode of the port. | ||||
| ClcsPortSecSwitchStatusState | 1.3.6.1.4.1.2356.14.3.5.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown. | ||||
| ClcsPortSecSwitchStatusMACCountCurrent | 1.3.6.1.4.1.2356.14.3.5.2.1.5 | Integer32 | RO | |
| ClcsPortSecSwitchStatusMACCountViolating | 1.3.6.1.4.1.2356.14.3.5.2.1.6 | Integer32 | RO | |
| ClcsPortSecSwitchStatusMACCountLimit | 1.3.6.1.4.1.2356.14.3.5.2.1.7 | Integer32 | RO | |
| ClcsPortSecSwitchStatusClear | 1.3.6.1.4.1.2356.14.3.5.2.1.8 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Remove all MAC addresses on all VLANs on this port. | ||||
| NlcsPortSecPortStatus | 1.3.6.1.4.1.2356.14.3.5.3 | |||
| SlcsPortSecPortStatusPort | 1.3.6.1.4.1.2356.14.3.5.3.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current port number default: 1 range: 1 - port number. | ||||
| TlcsPortSecPortStatusTable | 1.3.6.1.4.1.2356.14.3.5.3.2 | NA | ||
| RlcsPortSecPortStatusEntry | 1.3.6.1.4.1.2356.14.3.5.3.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsPortSecPortStatusIndex | 1.3.6.1.4.1.2356.14.3.5.3.2.1.1 | Integer32 (1..65535) | NA | |
| ClcsPortSecPortStatusMACAddress | 1.3.6.1.4.1.2356.14.3.5.3.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current MAC address that is seen on this port. | ||||
| ClcsPortSecPortStatusVLANId | 1.3.6.1.4.1.2356.14.3.5.3.2.1.3 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current VLAN ID that is seen on this port | ||||
| ClcsPortSecPortStatusState | 1.3.6.1.4.1.2356.14.3.5.3.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates whether the corresponding MAC address is violating (administrative user has configured the interface in Restrict mode and the MAC address is blocked), blocked, or forwarding. | ||||
| ClcsPortSecPortStatusAgeAndHold | 1.3.6.1.4.1.2356.14.3.5.3.2.1.5 | DisplayString | RO | |
| ClcsPortSecPortStatusClear | 1.3.6.1.4.1.2356.14.3.5.3.2.1.6 | Integer32 (0 | 1) | RW | |
column · Integer32 (0 | 1) · read-write · current Remove particular MAC addresses from MAC table 1:clear | ||||
| NlcsAccessManagement | 1.3.6.1.4.1.2356.14.3.6 | |||
| NlcsAccessMgmtConf | 1.3.6.1.4.1.2356.14.3.6.1 | |||
| SlcsAccessMgmtConfMode | 1.3.6.1.4.1.2356.14.3.6.1.1 | AdminMode | RW | |
scalar · AdminMode · read-write · current Indicates the access management mode operation. | ||||
| TlcsAccessMgmtConfTable | 1.3.6.1.4.1.2356.14.3.6.1.2 | NA | ||
table · not-accessible · current The Access Mgmt Conf Table. | ||||
| RlcsAccessMgmtConfEntry | 1.3.6.1.4.1.2356.14.3.6.1.2.1 | NA | ||
| ClcsAccessMgmtIndex | 1.3.6.1.4.1.2356.14.3.6.1.2.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current The Access Management config index. range : 1-16. | ||||
| ClcsAccessMgmtVlanID | 1.3.6.1.4.1.2356.14.3.6.1.2.1.2 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current The VLAN ID for the access management entry. range: 1-4094. | ||||
| ClcsAccessMgmtStartIpAddress | 1.3.6.1.4.1.2356.14.3.6.1.2.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The start IP address for the access management entry. | ||||
| ClcsAccessMgmtEndIpAddress | 1.3.6.1.4.1.2356.14.3.6.1.2.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The end IP address for the access management entry. | ||||
| ClcsAccessMgmtHttpHttps | 1.3.6.1.4.1.2356.14.3.6.1.2.1.5 | AdminMode | RC | |
column · AdminMode · read-create · current Indicates that the host can access the switch from HTTP/HTTPS interface if the host IP address matches the IP address range provided in the entry. | ||||
| ClcsAccessMgmtSNMP | 1.3.6.1.4.1.2356.14.3.6.1.2.1.6 | AdminMode | RC | |
column · AdminMode · read-create · current Indicates that the host can access the switch from SNMP interface if the host IP address matches the IP address range provided in the entry. | ||||
| ClcsAccessMgmtTelnetSSH | 1.3.6.1.4.1.2356.14.3.6.1.2.1.7 | AdminMode | RC | |
column · AdminMode · read-create · current Indicates that the host can access the switch from TELNET/SSH interface if the host IP address matches the IP address range provided in the entry. | ||||
| ClcsAccessMgmtRowStatus | 1.3.6.1.4.1.2356.14.3.6.1.2.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported. | ||||
| NlcsAccessMgmtStatistics | 1.3.6.1.4.1.2356.14.3.6.2 | |||
| SlcsAccessMgmtStatisticsClear | 1.3.6.1.4.1.2356.14.3.6.2.1 | ActivateCmd | RW | |
scalar · ActivateCmd · read-write · current Clear all statistics. | ||||
| TlcsAccessMgmtStatisticsTable | 1.3.6.1.4.1.2356.14.3.6.2.2 | NA | ||
table · not-accessible · current The Access Mgmt Statistics Table. | ||||
| RlcsAccessMgmtStatisticsEntry | 1.3.6.1.4.1.2356.14.3.6.2.2.1 | NA | ||
row · not-accessible · current The Access Mgmt Statistics Entry. | ||||
| ClcsAccessMgmtStatisticsInterface | 1.3.6.1.4.1.2356.14.3.6.2.2.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The interface type through which the remote host can access the switch. 1: HTTP, 2: HTTPs, 3: SNMP, 4: TELNET, 5: SSH
| ||||
| ClcsAccessMgmtStatisticsReceivedPackets | 1.3.6.1.4.1.2356.14.3.6.2.2.1.2 | Integer32 (1..10000000) | RO | |
column · Integer32 (1..10000000) · read-only · current Number of received packets from the interface when access management mode is enabled. | ||||
| ClcsAccessMgmtStatisticsAllowedPackets | 1.3.6.1.4.1.2356.14.3.6.2.2.1.3 | Integer32 (1..10000000) | RO | |
column · Integer32 (1..10000000) · read-only · current Number of allowed packets from the interface when access management mode is enabled. | ||||
| ClcsAccessMgmtStatisticsDiscardedPackets | 1.3.6.1.4.1.2356.14.3.6.2.2.1.4 | Integer32 (1..10000000) | RO | |
column · Integer32 (1..10000000) · read-only · current Number of discarded packets from the interface when access management mode is enabled. | ||||
| NlcsHTTPS | 1.3.6.1.4.1.2356.14.3.8 | |||
| SlcsHTTPSCertificateMaintain | 1.3.6.1.4.1.2356.14.3.8.4 | Integer32 (2..3) | RW | |
scalar · Integer32 (2..3) · read-write · current 2: Upload 3: Generate | ||||
| SlcsHTTPSCertificatePassPhrase | 1.3.6.1.4.1.2356.14.3.8.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current Enter the pass phrase in this field if your uploading certificate is protected by a specific passphrase. | ||||
| SlcsHTTPSCertificateUpload | 1.3.6.1.4.1.2356.14.3.8.6 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current default: 0 0: TFTP 1: URL | ||||
| SlcsHTTPSFileUploadFileURL | 1.3.6.1.4.1.2356.14.3.8.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current TFTP: filename URL: URL | ||||
| SlcsHTTPSFileUploadTFTPServer | 1.3.6.1.4.1.2356.14.3.8.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current TFTP server IP address | ||||
| SlcsHTTPSApply | 1.3.6.1.4.1.2356.14.3.8.9 | Integer32 (0 | 1) | RW | |
scalar · Integer32 (0 | 1) · read-write · current 1: apply the above https settings | ||||
| SlcsHTTPSCertificateStatus | 1.3.6.1.4.1.2356.14.3.8.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current Display the current status of certificate on the switch. | ||||
| NlcsAuthMethod | 1.3.6.1.4.1.2356.14.3.9 | |||
| TlcsAuthMethodConfigTable | 1.3.6.1.4.1.2356.14.3.9.1 | NA | ||
table · not-accessible · current The Auth Method Config Table. | ||||
| RlcsAuthMethodConfigEntry | 1.3.6.1.4.1.2356.14.3.9.1.1 | NA | ||
| ClcsAuthMethodConfigClient | 1.3.6.1.4.1.2356.14.3.9.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current 1: console. 2: telnet. 3: ssh. 4: http. 5: https.
| ||||
| ClcsAuthMethodConfigMethod1 | 1.3.6.1.4.1.2356.14.3.9.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Methods that involves remote servers are timed out if the remote servers are offline.Each method is tried from left to right and continues until a method either approves or rejects a user. 0: no, Authentication is disabled and login is not possible. 1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch. 2: local, Use the local user database on the switch for authentication. 3: radius, Use remote RADIUS server(s) for authentication. 4: tacacs+, Use remote TACACS+ server(s) for authentication.
| ||||
| ClcsAuthMethodConfigMethod2 | 1.3.6.1.4.1.2356.14.3.9.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Methods that involves remote servers are timed out if the remote servers are offline.Each method is tried from left to right and continues until a method either approves or rejects a user. 0: no, Authentication is disabled and login is not possible. 1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch. 2: local, Use the local user database on the switch for authentication. 3: radius, Use remote RADIUS server(s) for authentication. 4: tacacs+, Use remote TACACS+ server(s) for authentication.
| ||||
| ClcsAuthMethodConfigMethod3 | 1.3.6.1.4.1.2356.14.3.9.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Methods that involves remote servers are timed out if the remote servers are offline.Each method is tried from left to right and continues until a method either approves or rejects a user. 0: no, Authentication is disabled and login is not possible. 1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch. 2: local, Use the local user database on the switch for authentication. 3: radius, Use remote RADIUS server(s) for authentication. 4: tacacs+, Use remote TACACS+ server(s) for authentication.
| ||||
| ClcsAuthMethodConfigMethod4 | 1.3.6.1.4.1.2356.14.3.9.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Methods that involves remote servers are timed out if the remote servers are offline.Each method is tried from left to right and continues until a method either approves or rejects a user. 0: no, Authentication is disabled and login is not possible. 1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch. 2: local, Use the local user database on the switch for authentication. 3: radius, Use remote RADIUS server(s) for authentication. 4: tacacs+, Use remote TACACS+ server(s) for authentication.
| ||||
| ClcsAuthMethodConfigServicePort | 1.3.6.1.4.1.2356.14.3.9.1.1.6 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current The network port number this client bound to provide service. | ||||
| TlcsCommandAuthorizationMethodTable | 1.3.6.1.4.1.2356.14.3.9.2 | NA | ||
table · not-accessible · current The Command Authorized Method Config Table. | ||||
| RlcsCommandAuthorizationMethodEntry | 1.3.6.1.4.1.2356.14.3.9.2.1 | NA | ||
row · not-accessible · current The Command Authorized Method Config Entry. | ||||
| ClcsCommandAuthorizationMethodClient | 1.3.6.1.4.1.2356.14.3.9.2.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current 1: console. 2: telnet. 3: ssh. 4: http. 5: https.
| ||||
| ClcsCommandAuthorizationMethodMethod | 1.3.6.1.4.1.2356.14.3.9.2.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Method can be set to one of the following values: 0:no: Command authorization is disabled. User is granted access to CLI commands according to his privilege level. 4:tacacs: Use remote TACACS+ server(s) for command authorization. If all remote servers are offline, the user is granted access to CLI commands according to his privilege level. | ||||
| ClcsCommandAuthorizationMethodCmdLvl | 1.3.6.1.4.1.2356.14.3.9.2.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Authorize all commands with a privilege level higher than or equal to this level. Valid values are in the range 0 to 15. | ||||
| ClcsCommandAuthorizationMethodCfgCmd | 1.3.6.1.4.1.2356.14.3.9.2.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Also authorize configuration commands. 0:Disable 1:Enable | ||||
| TlcsAccountingMethodTable | 1.3.6.1.4.1.2356.14.3.9.3 | NA | ||
table · not-accessible · current The Accounting Method Config Table. | ||||
| RlcsAccountingMethodEntry | 1.3.6.1.4.1.2356.14.3.9.3.1 | NA | ||
| ClcsAccountingMethodClient | 1.3.6.1.4.1.2356.14.3.9.3.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current 1: console. 2: telnet. 3: ssh. 4: http. 5: https.
| ||||
| ClcsAccountingMethodMethod | 1.3.6.1.4.1.2356.14.3.9.3.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Method can be set to one of the following values: 0:no: Accounting is disabled. 4:tacacs: Use remote TACACS+ server(s) for accounting. | ||||
| ClcsAccountingMethodCmdLvl | 1.3.6.1.4.1.2356.14.3.9.3.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Enable accounting of all commands with a privilege level higher than or equal to this level. Valid values are in the range 0 to 15. Leave the field empty to disable command accounting. | ||||
| ClcsAccountingMethodCfgCmd | 1.3.6.1.4.1.2356.14.3.9.3.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Enable exec (login) accounting. 0:Disable 1:Enable | ||||
| NlcsDot1xSupplicant | 1.3.6.1.4.1.2356.14.3.1500 | |||
| SlcsDot1xSupplicantSystemMode | 1.3.6.1.4.1.2356.14.3.1500.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Global 802.1X Supplicant Enable / Disable Mode
| ||||
| SlcsDot1xSupplicantSystemEapMethods | 1.3.6.1.4.1.2356.14.3.1500.2 | Bits | RW | |
scalar · Bits · read-write · current EAP Methods which will be support in communication with the EAP Authenticator.
| ||||
| TlcsDot1xSupplicantTable | 1.3.6.1.4.1.2356.14.3.1500.3 | NA | ||
table · not-accessible · current Table of all available supplicants and their configuration and status | ||||
| RlcsDot1xSupplicantEntry | 1.3.6.1.4.1.2356.14.3.1500.3.1 | NA | ||
| ClcsDot1xSupplicantIndex | 1.3.6.1.4.1.2356.14.3.1500.3.1.1 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current Index of the supplicant, 1-5 | ||||
| ClcsDot1xSupplicantPortNumber | 1.3.6.1.4.1.2356.14.3.1500.3.1.2 | Integer32 (0..52) | RW | |
column · Integer32 (0..52) · read-write · current Port on which the supplicant operates. Port 0 is equivalent to lcsDot1xSupplicantConfigMode disable. | ||||
| ClcsDot1xSupplicantConfigMode | 1.3.6.1.4.1.2356.14.3.1500.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Configured mode of the supplicant
| ||||
| ClcsDot1xSupplicantConfigUsername | 1.3.6.1.4.1.2356.14.3.1500.3.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current Username the supplicant should use for authentication | ||||
| ClcsDot1xSupplicantConfigPassword | 1.3.6.1.4.1.2356.14.3.1500.3.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current Password the supplicant should use for authentication. Only reads '********' for a set password and '' (empty) for unset password. | ||||
| ClcsDot1xSupplicantStatusActive | 1.3.6.1.4.1.2356.14.3.1500.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Operating status of the supplicant
| ||||
| ClcsDot1xSupplicantStatusAuthorized | 1.3.6.1.4.1.2356.14.3.1500.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Authorized status of the supplicant
| ||||
| ClcsDot1xSupplicantStatusLink | 1.3.6.1.4.1.2356.14.3.1500.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Link status of port of the supplicant
| ||||
| ClcsDot1xSupplicantStatusLogoff | 1.3.6.1.4.1.2356.14.3.1500.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current If the supplicant did logoff from the authenticator
| ||||
| ClcsDot1xSupplicantStatusString | 1.3.6.1.4.1.2356.14.3.1500.3.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Last status message of the supplicant | ||||
| ClcsDot1xSupplicantStatusResult | 1.3.6.1.4.1.2356.14.3.1500.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Result from the supplicant, unknown if authentication was not yet completed
| ||||
| SlcsDot1xSupplicantSystemMacMode | 1.3.6.1.4.1.2356.14.3.1500.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use the system mac or separate port mac during authentication
| ||||
| NlcsMaintenance | 1.3.6.1.4.1.2356.14.4 | |||
| SlcsRestartDevice | 1.3.6.1.4.1.2356.14.4.1 | ActivateCmd | RW | |
scalar · ActivateCmd · read-write · current Command to restart the device. | ||||
| SlcsFactoryDefaults | 1.3.6.1.4.1.2356.14.4.2 | ActivateCmd | RW | |
scalar · ActivateCmd · read-write · current Reset the configuration to Factory Defaults keep-ip. | ||||
| NlcsSoftware | 1.3.6.1.4.1.2356.14.4.3 | |||
| SlcsSoftwareUsername | 1.3.6.1.4.1.2356.14.4.3.1 | DisplayString | RW | |
scalar · DisplayString · read-write · current Get/Set the username for 'tftp' firmware upgrading. | ||||
| SlcsSoftwarePassword | 1.3.6.1.4.1.2356.14.4.3.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current Get/Set the password for 'tftp' firmware upgrading. | ||||
| SlcsSoftwareIpAddress | 1.3.6.1.4.1.2356.14.4.3.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current Get/Set the firmware tftp server. | ||||
| SlcsSoftwareFileName | 1.3.6.1.4.1.2356.14.4.3.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current Get/Set the path and filename for firmware upgrading. | ||||
| SlcsSoftwareUpgradeCmd | 1.3.6.1.4.1.2356.14.4.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Firmware upgrade command. noAction(0 )- do nothing (read only). tftpUpgrade (1) - activate 'tftp' firmware upgrade
| ||||
| SlcsSoftwareImageSelectionCmd | 1.3.6.1.4.1.2356.14.4.3.6 | ActivateCmd | RW | |
scalar · ActivateCmd · read-write · current Activate firmware image selection. noAction(0) - do nothing - returned upon get. activate(1) - activate firmware image selection. | ||||
| NlcsConfig | 1.3.6.1.4.1.2356.14.4.4 | |||
| SlcsSaveStartCmd | 1.3.6.1.4.1.2356.14.4.4.1 | ActivateCmd | RW | |
scalar · ActivateCmd · read-write · current This copies running-config to startup-config, thereby ensuring that the currently active configuration will be used at the next reboot. | ||||
| SlcsConfigUsername | 1.3.6.1.4.1.2356.14.4.4.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current Get/Set the username for 'tftp' 'upload config' or 'download config'. | ||||
| SlcsConfigPassword | 1.3.6.1.4.1.2356.14.4.4.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current Get/Set the password for 'tftp' 'upload config' or 'download config'. | ||||
| SlcsConfigIpAddress | 1.3.6.1.4.1.2356.14.4.4.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current Get/Set the IP address for 'tftp' 'upload config' or 'download config'. | ||||
| SlcsConfigFilename | 1.3.6.1.4.1.2356.14.4.4.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current Get/Set the filename in switch for 'tftp' 'upload config' or 'download config'. | ||||
| TlcsConfigFileTable | 1.3.6.1.4.1.2356.14.4.4.6 | NA | ||
table · not-accessible · current The config file tabe. | ||||
| RlcsConfigFileEntry | 1.3.6.1.4.1.2356.14.4.4.6.1 | NA | ||
| ClcsConfigFileIndex | 1.3.6.1.4.1.2356.14.4.4.6.1.1 | Integer32 (1..255) | NA | |
column · Integer32 (1..255) · not-accessible · current The config file index. | ||||
| ClcsShowConfigFileName | 1.3.6.1.4.1.2356.14.4.4.6.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Shows the config file name. Without config filename:'NewConfig' is temp file when 'activate download config' can 'create new file' and 'change create filename'. | ||||
| ClcsActivateConfigCmd | 1.3.6.1.4.1.2356.14.4.4.6.1.3 | ActivateCmd | RW | |
column · ActivateCmd · read-write · current Activate config command. noAction(0) : do nothing (read only). activate(1) : activate the config | ||||
| ClcsDeleteConfigCmd | 1.3.6.1.4.1.2356.14.4.4.6.1.4 | ActivateCmd | RW | |
column · ActivateCmd · read-write · current Delete config command. noAction(0) : do nothing (read only). activate(1) : delete the config | ||||
| ClcsDownloadConfigCmd | 1.3.6.1.4.1.2356.14.4.4.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Download config command. noAction (0) - do nothing (read only). tftpUpload (1) - activate 'tftp' config download.
| ||||
| ClcsUploadConfigCmd | 1.3.6.1.4.1.2356.14.4.4.6.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Upload config command. noAction (0) - do nothing (read only). tftpDownload (1) - activate 'tftp' config upload. For merge/replace running-config: 1:merge 3:replace
| ||||
| NlcsDiagnostics | 1.3.6.1.4.1.2356.14.4.5 | |||
| SlcsPingIpAddress | 1.3.6.1.4.1.2356.14.4.5.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The destination IP Address. | ||||
| SlcsPingSize | 1.3.6.1.4.1.2356.14.4.5.2 | Integer32 (60..1400) | RW | |
scalar · Integer32 (60..1400) · read-write · current Size of ICMP echo packet. range : 60-1400, default : 64. | ||||
| SlcsDoPingConfig | 1.3.6.1.4.1.2356.14.4.5.3 | Integer32 (1) | RW | |
scalar · Integer32 (1) · read-write · current Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. | ||||
| SlcsPingResult | 1.3.6.1.4.1.2356.14.4.5.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current Show ping result. | ||||
| SlcsPing6IpAddress | 1.3.6.1.4.1.2356.14.4.5.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current The destination IPv6 Address. | ||||
| SlcsPing6Size | 1.3.6.1.4.1.2356.14.4.5.6 | Integer32 (60..1400) | RW | |
scalar · Integer32 (60..1400) · read-write · current Size of ICMP echo packet. range : 60-1400. | ||||
| SlcsPing6EgressInterface | 1.3.6.1.4.1.2356.14.4.5.7 | Integer32 (1..4094) | RW | |
scalar · Integer32 (1..4094) · read-write · current The VLAN ID (VID) of the specific egress IPv6 interface which ICMP packet goes. | ||||
| SlcsDoPing6Config | 1.3.6.1.4.1.2356.14.4.5.8 | Integer32 (1) | RW | |
scalar · Integer32 (1) · read-write · current Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. | ||||
| SlcsPing6Result | 1.3.6.1.4.1.2356.14.4.5.9 | DisplayString | RO | |
scalar · DisplayString · read-only · current Show ping result. | ||||
| SlcstracerouteIpAddress | 1.3.6.1.4.1.2356.14.4.5.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The destination IP Address. | ||||
| SlcstracerouteWaittime | 1.3.6.1.4.1.2356.14.4.5.12 | Integer32 (1..60) | RW | |
scalar · Integer32 (1..60) · read-write · current Specify wait time for waiting probe packets come back. range : 1-60(sec), default : 5(sec). | ||||
| SlcstracerouteMaxTTL | 1.3.6.1.4.1.2356.14.4.5.13 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Specify max TTL. range : 1-255, default : 30. | ||||
| SlcstracerouteNqueries | 1.3.6.1.4.1.2356.14.4.5.14 | Integer32 (1..10) | RW | |
scalar · Integer32 (1..10) · read-write · current Specify number of probe packets. range : 1-10, default : 3. | ||||
| SlcsDotracerouteConfig | 1.3.6.1.4.1.2356.14.4.5.15 | Integer32 (1) | RW | |
scalar · Integer32 (1) · read-write · current Do traceroute-config. Get this OID always return zero. 1 - ping. Uses the traceroute program to get ip address of the middle gateway. | ||||
| SlcstracerouteResult | 1.3.6.1.4.1.2356.14.4.5.16 | DisplayString | RO | |
scalar · DisplayString · read-only · current Show traceroute result. | ||||
| NlcsCableDiagnostics | 1.3.6.1.4.1.2356.14.4.5.17 | |||
| SlcsCableDiagnosticsTest | 1.3.6.1.4.1.2356.14.4.5.17.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current Run Cable Diagnostics. port, range : 1 - port number. | ||||
| TlcsCableDiagnosticsTable | 1.3.6.1.4.1.2356.14.4.5.17.2 | NA | ||
| RlcsCableDiagnosticsEntry | 1.3.6.1.4.1.2356.14.4.5.17.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsCableDiagnosticsPort | 1.3.6.1.4.1.2356.14.4.5.17.2.1.1 | Integer32 (1..52) | NA | |
column · Integer32 (1..52) · not-accessible · current port index | ||||
| ClcsCableDiagnosticsLinkStatus | 1.3.6.1.4.1.2356.14.4.5.17.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The status of the cable. | ||||
| ClcsCableDiagnosticsTestResult | 1.3.6.1.4.1.2356.14.4.5.17.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Test Result of the cable. | ||||
| ClcsCableDiagnosticsLength | 1.3.6.1.4.1.2356.14.4.5.17.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The length (in meters) of the cable. | ||||
| NlcsSwitchRebootSchedule | 1.3.6.1.4.1.2356.14.4.6 | |||
| SlcsSwitchRebootMode | 1.3.6.1.4.1.2356.14.4.6.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current Switch Reboot Mode. 0:disable 1:enable | ||||
| TlcsSwitchRebootTimeTable | 1.3.6.1.4.1.2356.14.4.6.2 | NA | ||
table · not-accessible · current Configure the Switch reboot time. | ||||
| RlcsSwitchRebootTimeEntry | 1.3.6.1.4.1.2356.14.4.6.2.1 | NA | ||
row · not-accessible · current | ||||
| ClcsSwitchRebootWeekIndex | 1.3.6.1.4.1.2356.14.4.6.2.1.1 | Integer32 (1..7) | NA | |
column · Integer32 (1..7) · not-accessible · current Switch reboot week index. 1: Sun, 2: Mon, 3:Tue, 4: Wed, 5: Thu, 6: Fri, 7: Sat | ||||
| ClcsSwitchRebootTimeHour | 1.3.6.1.4.1.2356.14.4.6.2.1.2 | Integer32 (-1..23) | RW | |
column · Integer32 (-1..23) · read-write · current Switch Reboot Time (Hour). Range: 0-23. -1:disable | ||||
| ClcsSwitchRebootTimeMinute | 1.3.6.1.4.1.2356.14.4.6.2.1.3 | Integer32 (-1..55) | RW | |
column · Integer32 (-1..55) · read-write · current Switch Reboot Time (Minute). Range:0,5,10,...,55. -1:disable | ||||
| NlcsiPerf | 1.3.6.1.4.1.2356.14.4.7 | |||
| SlcsiPerfMethod | 1.3.6.1.4.1.2356.14.4.7.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current The measuring method of iPerf. 2:iPerf version 2 3:iPerf version 3 | ||||
| SlcsiPerfHost | 1.3.6.1.4.1.2356.14.4.7.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The address of iPerf server. | ||||
| SlcsiPerfPort | 1.3.6.1.4.1.2356.14.4.7.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current The listen port of iPerf server. The default value is 5001 for iPerf, 5201 for iPerf3. | ||||
| SlcsiPerfTime | 1.3.6.1.4.1.2356.14.4.7.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current The time in seconds to transmit for (default 10 secs). | ||||
| SlcsiPerfInterval | 1.3.6.1.4.1.2356.14.4.7.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The time in seconds between periodic bandwidth reports (default no periodic reports). | ||||
| SlcsiPerfTTL | 1.3.6.1.4.1.2356.14.4.7.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The time-to-live, for multicast (default 1). | ||||
| SlcsiPerfStart | 1.3.6.1.4.1.2356.14.4.7.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current Start iPerf 1:Start. | ||||
| SlcsiPerfResult | 1.3.6.1.4.1.2356.14.4.7.9 | DisplayString | RO | |
scalar · DisplayString · read-only · current Test result of iPerf | ||||
| NlcsTrap | 1.3.6.1.4.1.2356.14.5 | |||
| NlcsTrapEvent | 1.3.6.1.4.1.2356.14.5.1 | |||
| !lcsEmergency | 1.3.6.1.4.1.2356.14.5.1.1 | |||
| !lcsAlert | 1.3.6.1.4.1.2356.14.5.1.2 | |||
| !lcsCritical | 1.3.6.1.4.1.2356.14.5.1.3 | |||
| !lcsError | 1.3.6.1.4.1.2356.14.5.1.4 | |||
| !lcsWarning | 1.3.6.1.4.1.2356.14.5.1.5 | |||
| !lcsNotice | 1.3.6.1.4.1.2356.14.5.1.6 | |||
| !lcsInformational | 1.3.6.1.4.1.2356.14.5.1.7 | |||
notification · current The severity level is Informational. Informational conditions.
| ||||
| !lcsDebug | 1.3.6.1.4.1.2356.14.5.1.8 | |||
| NlcsTrapVariable | 1.3.6.1.4.1.2356.14.5.2 | |||
| SlcsInformation | 1.3.6.1.4.1.2356.14.5.2.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current Trap information. | ||||
| NlcsMacTrap | 1.3.6.1.4.1.2356.14.5.100 | |||
| NlcsMacTrapEvent | 1.3.6.1.4.1.2356.14.5.100.1 | |||
| !lcsMacTrapAddNotification | 1.3.6.1.4.1.2356.14.5.100.1.1 | |||
notification · current Event generated for a new learned mac address. dot1qTpFdbAddress: The mac address. dot1qFdbId: The VLAN ID. dot1qTpFdbPort: The port the mac address was learned on.
| ||||
| !lcsMacTrapDelNotification | 1.3.6.1.4.1.2356.14.5.100.1.2 | |||
notification · current Event generated for a deleted mac address. dot1qTpFdbAddress: The mac address. dot1qFdbId: The VLAN ID. dot1qTpFdbPort: The port the mac address was known on. | ||||
| NlcsMacTrapVars | 1.3.6.1.4.1.2356.14.5.100.2 | |||
| SlcsMacTrapVarDelReason | 1.3.6.1.4.1.2356.14.5.100.2.1 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The textual reason for deletion of a mac address. | ||||
| NlcsProducts | 1.3.6.1.4.1.2356.14.8 | |||
| NlcsProductsGS3126X | 1.3.6.1.4.1.2356.14.8.3126 | |||
| NlcsProductsGS3126XP | 1.3.6.1.4.1.2356.14.8.3127 | |||
| NlcsProductsGS3128X | 1.3.6.1.4.1.2356.14.8.3128 | |||
| NlcsProductsGS3128XP | 1.3.6.1.4.1.2356.14.8.3129 | |||
| NlcsProductsGS3152X | 1.3.6.1.4.1.2356.14.8.3152 | |||
| NlcsProductsGS3152XP | 1.3.6.1.4.1.2356.14.8.3153 | |||
| NlcsProductsGS3152XSP | 1.3.6.1.4.1.2356.14.8.3154 | |||
| NlcsProductsGS3152P | 1.3.6.1.4.1.2356.14.8.3155 | |||
| NlcsProductsGS3510XP | 1.3.6.1.4.1.2356.14.8.3510 | |||
| NlcsProductsGS3510X | 1.3.6.1.4.1.2356.14.8.3511 | |||
| NlcsProductsGS3528XSP | 1.3.6.1.4.1.2356.14.8.3528 | |||
| NlcsProductsGS3528XP | 1.3.6.1.4.1.2356.14.8.3529 | |||
| NlcsProductsGS3528X | 1.3.6.1.4.1.2356.14.8.3530 | |||
| NlcsProductsGS3528XUP | 1.3.6.1.4.1.2356.14.8.3531 | |||
Textual conventions
ActivateCmdINTEGERactivate(1)noAction(0)Used to activate commands. default: noAction(0).
AdminModeINTEGERdisable(0)enable(1)The Admin state - default: disable(0).
AdminMode2INTEGERdisable(0)enable(1)notSupported(2)The Admin state - default: disable(0).
DayOfWeekINTEGERfri(5)mon(1)sat(6)sun(7)thur(4)tue(2)wed(3)Used to set the days of the week.
FrameRateINTEGERoneFramePerMin(5)oneFramePerSec(3)oneHundredFramesPerSec(1)sixFramesPerHour(6)sixFramesPerMin(4)tenFramesPerSec(2)threeHundredFramesPerSec(0)The values for frame rate
KeyTypeINTEGERdoubleTag(1)ipAddr(2)macAndIpAddr(3)normal(0)The key type specifying the key generated for frames received on the port. 0 : Normal, 1 : Double Tag, 2 : IP Address, 3 : MAC and IP Address.
MonthINTEGERapril(4)aug(8)dec(12)feb(2)jan(1)july(7)june(6)march(3)may(5)nov(11)oct(10)sept(9)Used to set the month.
OperStateINTEGERdown(2)up(1)Oper state.
SNMPv3AuthenticationProtocolINTEGERmd5(1)none(0)sha1(2)sha224(3)sha256(4)sha384(5)sha512(6)SNMPv3 USM authentication protocol values.
SNMPv3PrivacyProtocolINTEGERaes128(2)aes192(3)aes256(4)des(1)none(0)SNMPv3 USM privacy protocol values.
SNMPv3SecurityLevelINTEGERauthNoPriv(2)authPriv(3)noAuthNoPriv(1)SNMPv3 USM security levels.
Traps / Notifications
- lcsAlert
1.3.6.1.4.1.2356.14.5.1.2 - lcsCritical
1.3.6.1.4.1.2356.14.5.1.3 - lcsDebug
1.3.6.1.4.1.2356.14.5.1.8 - lcsEmergency
1.3.6.1.4.1.2356.14.5.1.1 - lcsError
1.3.6.1.4.1.2356.14.5.1.4 - lcsInformational
1.3.6.1.4.1.2356.14.5.1.7 - lcsMacTrapAddNotification
1.3.6.1.4.1.2356.14.5.100.1.1 - lcsMacTrapDelNotification
1.3.6.1.4.1.2356.14.5.100.1.2 - lcsNotice
1.3.6.1.4.1.2356.14.5.1.6 - lcsWarning
1.3.6.1.4.1.2356.14.5.1.5