ISKRATEL-MSAN-MIB
Iskratel, Ltd., Telecommunications SystemsDescription.
snmptranslate -m ISKRATEL-MSAN-MIB -Tpsnmpwalk -v2c -c <community> -m ISKRATEL-MSAN-MIB <host> 1.3.6.1.4.1.1332.1.1.5Imports
| BRIDGE-MIB | dot1dBasePort |
|---|---|
| IF-MIB | InterfaceIndex, ifAdminStatus, ifDescr, ifIndex, ifOperStatus |
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv4, InetAddressIPv6, InetAddressType |
| Q-BRIDGE-MIB | VlanIndex, dot1qVlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | BITS, Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| VDSL-LINE-MIB | vdslLineConfProfileName |
| VDSL2-LINE-MIB | xdsl2LineAlarmConfTemplateEntry, xdsl2LineConfTemplateEntry |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Niskratel | 1.3.6.1.4.1.1332 | ||||||||||||||||||||
| Nsi2000 | 1.3.6.1.4.1.1332.1 | ||||||||||||||||||||
| Nproducts | 1.3.6.1.4.1.1332.1.1 | ||||||||||||||||||||
| Imsan | 1.3.6.1.4.1.1332.1.1.5 | ||||||||||||||||||||
identity Description. | |||||||||||||||||||||
| NmsanInfo | 1.3.6.1.4.1.1332.1.1.5.1 | ||||||||||||||||||||
| NmsanShelfInfo | 1.3.6.1.4.1.1332.1.1.5.1.1 | ||||||||||||||||||||
| SmsanShelfId | 1.3.6.1.4.1.1332.1.1.5.1.1.1 | OCTET STRING | RO | MEA | |||||||||||||||||
scalar · OCTET STRING · read-only · current MSAN shelf ID. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanShelfType | 1.3.6.1.4.1.1332.1.1.5.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current MSAN shelf type. | |||||||||||||||||||||
| SmsanShelfSize | 1.3.6.1.4.1.1332.1.1.5.1.1.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Size of MSAN shelf (in number of slots). | |||||||||||||||||||||
| NmsanBoardInfo | 1.3.6.1.4.1.1332.1.1.5.1.2 | ||||||||||||||||||||
| TmsanBoardTable | 1.3.6.1.4.1.1332.1.1.5.1.2.1 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Description. | |||||||||||||||||||||
| RmsanBoardEntry | 1.3.6.1.4.1.1332.1.1.5.1.2.1.1 | NA | deprecated | ||||||||||||||||||
| CmsanBoardNr | 1.3.6.1.4.1.1332.1.1.5.1.2.1.1.1 | INTEGER (1..1000) | NA | deprecated | |||||||||||||||||
column · INTEGER (1..1000) · not-accessible · deprecated Unique identification of a board. | |||||||||||||||||||||
| CmsanBoardParentNr | 1.3.6.1.4.1.1332.1.1.5.1.2.1.1.2 | INTEGER (1..1000) | RO | deprecated | |||||||||||||||||
column · INTEGER (1..1000) · read-only · deprecated Unique identification of a parent board. | |||||||||||||||||||||
| CmsanBoardPosition | 1.3.6.1.4.1.1332.1.1.5.1.2.1.1.3 | INTEGER (1..1000) | RO | deprecated | |||||||||||||||||
column · INTEGER (1..1000) · read-only · deprecated Position of the board on the parent board. | |||||||||||||||||||||
| CmsanBoardType | 1.3.6.1.4.1.1332.1.1.5.1.2.1.1.4 | OCTET STRING | RO | deprecated | |||||||||||||||||
column · OCTET STRING · read-only · deprecated Type of physical board (e.g. IDC, SGO, SFA, ...) | |||||||||||||||||||||
| CmsanBoardId | 1.3.6.1.4.1.1332.1.1.5.1.2.1.1.5 | OCTET STRING | RO | deprecated | |||||||||||||||||
column · OCTET STRING · read-only · deprecated Name (actual identification) of a board. | |||||||||||||||||||||
| CmsanBoardSerialNr | 1.3.6.1.4.1.1332.1.1.5.1.2.1.1.6 | OCTET STRING | RO | deprecated | |||||||||||||||||
column · OCTET STRING · read-only · deprecated Serial number of a board. | |||||||||||||||||||||
| CmsanBoardDescription | 1.3.6.1.4.1.1332.1.1.5.1.2.1.1.7 | OCTET STRING | RW | deprecated | |||||||||||||||||
column · OCTET STRING · read-write · deprecated Description of the board. | |||||||||||||||||||||
| NmsanSwInfo | 1.3.6.1.4.1.1332.1.1.5.1.3 | ||||||||||||||||||||
| SmsanSwSteerVersion | 1.3.6.1.4.1.1332.1.1.5.1.3.1 | DisplayString | RO | AN9920CP_1.2.0.0.024 | |||||||||||||||||
scalar · DisplayString · read-only · current The unique steer code for this software. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSwBuildDirectory | 1.3.6.1.4.1.1332.1.1.5.1.3.2 | DisplayString | RO | n/a | |||||||||||||||||
scalar · DisplayString · read-only · current The directory where software was build on. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSwBuildTime | 1.3.6.1.4.1.1332.1.1.5.1.3.3 | DisplayString | RO | Wed Sep 16 07:29:53 2026 | |||||||||||||||||
scalar · DisplayString · read-only · current The time when the software was built. (DateAndTime textual convention, from SNMPv2-TC) Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSwBranch | 1.3.6.1.4.1.1332.1.1.5.1.3.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The repository branch where the software was built from. | |||||||||||||||||||||
| SmsanSwBuildReference | 1.3.6.1.4.1.1332.1.1.5.1.3.5 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The repository reference number of the software build branch. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSwILVersion | 1.3.6.1.4.1.1332.1.1.5.1.3.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The unique IL steer code for this software. | |||||||||||||||||||||
| SmsanSwIpmiVersion | 1.3.6.1.4.1.1332.1.1.5.1.3.7 | DisplayString | RO | 3.62/0 | |||||||||||||||||
scalar · DisplayString · read-only · current The major version.minor version/IPMI version supported(HEX) number of the IPMI currently running on the switch. For example, if the major version was 1 and the minor version was 2, the format would be '1.2/0'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSwBspVersion | 1.3.6.1.4.1.1332.1.1.5.1.3.8 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The release.version/id number of the BSP software currently running on the switch. For example, if the release was 1 and the version was 2, the format would be '1.2/0'. | |||||||||||||||||||||
| SmsanSwCPLDVersion | 1.3.6.1.4.1.1332.1.1.5.1.3.9 | DisplayString | RO | 0x06 | |||||||||||||||||
scalar · DisplayString · read-only · current CPLD (Complex Programmable Logic Device) SW version Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanReservePackage | 1.3.6.1.4.1.1332.1.1.5.1.3.10 | DisplayString | RO | AN9920CP_1.1.0.0.019 | |||||||||||||||||
scalar · DisplayString · read-only · current Name of the reserve package on disk if it exists. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanSwComponentTable | 1.3.6.1.4.1.1332.1.1.5.1.3.11 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanSwComponentEntry | 1.3.6.1.4.1.1332.1.1.5.1.3.11.1 | NA | |||||||||||||||||||
| CmsanSwComponentId | 1.3.6.1.4.1.1332.1.1.5.1.3.11.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Unique index of SW component. | |||||||||||||||||||||
| CmsanSwComponentName | 1.3.6.1.4.1.1332.1.1.5.1.3.11.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Name of software component (e.g. ES, EV, EF, EA). | |||||||||||||||||||||
| CmsanSwComponentSteerVersion | 1.3.6.1.4.1.1332.1.1.5.1.3.11.1.3 | DisplayString | RO | 1.25.0 | |||||||||||||||||
column · DisplayString · read-only · current Code version for this software component. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSwComponentType | 1.3.6.1.4.1.1332.1.1.5.1.3.11.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Type of SW component.
| |||||||||||||||||||||
| CmsanSwComponentExternalVersion | 1.3.6.1.4.1.1332.1.1.5.1.3.11.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current External code version of this software component. | |||||||||||||||||||||
| NmsanOtherInfo | 1.3.6.1.4.1.1332.1.1.5.1.4 | ||||||||||||||||||||
| SmsanSnmpSetErrorReason | 1.3.6.1.4.1.1332.1.1.5.1.4.1 | DisplayString | RO | no error | |||||||||||||||||
scalar · DisplayString · read-only · current Last error description of SNMP set command. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanLicense | 1.3.6.1.4.1.1332.1.1.5.1.5 | ||||||||||||||||||||
| NmsanLicenseGlobal | 1.3.6.1.4.1.1332.1.1.5.1.5.1 | ||||||||||||||||||||
| SmsanLicenseId | 1.3.6.1.4.1.1332.1.1.5.1.5.1.1 | DisplayString | RO | deprecated | |||||||||||||||||
scalar · DisplayString · read-only · deprecated License ID. | |||||||||||||||||||||
| SmsanLicenseCreationDate | 1.3.6.1.4.1.1332.1.1.5.1.5.1.2 | DisplayString | RO | deprecated | |||||||||||||||||
scalar · DisplayString · read-only · deprecated Licence creation date. | |||||||||||||||||||||
| SmsanLicenseExpirationDate | 1.3.6.1.4.1.1332.1.1.5.1.5.1.3 | DisplayString | RO | deprecated | |||||||||||||||||
scalar · DisplayString · read-only · deprecated Licence expiration date. | |||||||||||||||||||||
| SmsanLicenseCustomerId | 1.3.6.1.4.1.1332.1.1.5.1.5.1.4 | DisplayString | RO | deprecated | |||||||||||||||||
scalar · DisplayString · read-only · deprecated License customer ID. | |||||||||||||||||||||
| SmsanLicenseActivate | 1.3.6.1.4.1.1332.1.1.5.1.5.1.5 | INTEGER | RW | deprecated | disable(2) | ||||||||||||||||
scalar · INTEGER · read-write · deprecated Activate licence files from local disk.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanLicenseFileGet | 1.3.6.1.4.1.1332.1.1.5.1.5.1.6 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current msanLicenseFileGet parameter is used to start transfer of license file (extension .lic) from external tftp or ftp server to local file. Next syntax must be used for tftp or ftp transfer: tftp://<IP>|<hostname>[:<port>]/[<path>/]<remote_file_name> [<local_file_name>] ftp://<usr>[:<pass>]@<IP>|<hostname>[:<port>]/[<path>/]<remote_file_name> [<local_file_name>] | |||||||||||||||||||||
| TmsanLicenseOnuTable | 1.3.6.1.4.1.1332.1.1.5.1.5.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanLicenseOnuEntry | 1.3.6.1.4.1.1332.1.1.5.1.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CmsanLicenseOnuVendorId | 1.3.6.1.4.1.1332.1.1.5.1.5.2.1.1 | DisplayString | NA | ||||||||||||||||||
column · DisplayString · not-accessible · current Licensed ONU vendor ID. | |||||||||||||||||||||
| TmsanLicenseFileTable | 1.3.6.1.4.1.1332.1.1.5.1.5.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanLicenseFileEntry | 1.3.6.1.4.1.1332.1.1.5.1.5.3.1 | NA | |||||||||||||||||||
| CmsanLicenseFileName | 1.3.6.1.4.1.1332.1.1.5.1.5.3.1.1 | DisplayString | NA | ||||||||||||||||||
column · DisplayString · not-accessible · current License file name (extension .lic) | |||||||||||||||||||||
| CmsanLicenseFileRowStatus | 1.3.6.1.4.1.1332.1.1.5.1.5.3.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| CmsanLicenseFileActivate | 1.3.6.1.4.1.1332.1.1.5.1.5.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Activate licence file from local disk.
| |||||||||||||||||||||
| TmsanActiveLicenseTable | 1.3.6.1.4.1.1332.1.1.5.1.5.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanActiveLicenseEntry | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1 | NA | |||||||||||||||||||
| CmsanActiveLicenseType | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current License type.
| |||||||||||||||||||||
| CmsanActiveLicenceFileName | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current License file name (extension .lic) | |||||||||||||||||||||
| CmsanActiveLicenseId | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current License ID. | |||||||||||||||||||||
| CmsanActiveLicenseCreationDate | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Licence creation date. | |||||||||||||||||||||
| CmsanActiveLicenseExpirationDate | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Licence expiration date. | |||||||||||||||||||||
| CmsanActiveLicenseCustomerId | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current License customer ID. | |||||||||||||||||||||
| CmsanActiveLicenseNodeId | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Node ID. | |||||||||||||||||||||
| CmsanActiveLicenseNodeMaxOltPorts | 1.3.6.1.4.1.1332.1.1.5.1.5.4.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Maximum number of supported OLT ports. | |||||||||||||||||||||
| NmsanResources | 1.3.6.1.4.1.1332.1.1.5.1.6 | ||||||||||||||||||||
| NmsanCpu | 1.3.6.1.4.1.1332.1.1.5.1.6.1 | ||||||||||||||||||||
| SmsanCpuCurUsage | 1.3.6.1.4.1.1332.1.1.5.1.6.1.1 | INTEGER (0..100) | RO | 7 | |||||||||||||||||
scalar · INTEGER (0..100) · read-only · current Current CPU Usage in the last 10 sec.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanCpuMaxUsage | 1.3.6.1.4.1.1332.1.1.5.1.6.1.2 | INTEGER (0..100) | RO | 19 | |||||||||||||||||
scalar · INTEGER (0..100) · read-only · current Maximum CPU Usage.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanCpuMinUsage | 1.3.6.1.4.1.1332.1.1.5.1.6.1.3 | INTEGER (0..100) | RO | 3 | |||||||||||||||||
scalar · INTEGER (0..100) · read-only · current Minimum CPU Usage.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanCpuAvgUsage | 1.3.6.1.4.1.1332.1.1.5.1.6.1.4 | INTEGER (0..100) | RO | 6 | |||||||||||||||||
scalar · INTEGER (0..100) · read-only · current Average CPU Usage.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanCpuDetailTable | 1.3.6.1.4.1.1332.1.1.5.1.6.1.10 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanCpuDetailEntry | 1.3.6.1.4.1.1332.1.1.5.1.6.1.10.1 | NA | |||||||||||||||||||
| CmsanCpuDetailId | 1.3.6.1.4.1.1332.1.1.5.1.6.1.10.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current CPU unit ID. | |||||||||||||||||||||
| CmsanCpuDetailCurUsage | 1.3.6.1.4.1.1332.1.1.5.1.6.1.10.1.2 | INTEGER | RO | 11 | |||||||||||||||||
column · INTEGER · read-only · current Current Usage of specified CPU in the last 10 sec.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanCpuDetailMaxUsage | 1.3.6.1.4.1.1332.1.1.5.1.6.1.10.1.3 | INTEGER | RO | 28 | |||||||||||||||||
column · INTEGER · read-only · current Maximum Usage of specified CPU.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanCpuDetailMinUsage | 1.3.6.1.4.1.1332.1.1.5.1.6.1.10.1.4 | INTEGER | RO | 3 | |||||||||||||||||
column · INTEGER · read-only · current Minimum Usage of specified CPU.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanCpuDetailAvgUsage | 1.3.6.1.4.1.1332.1.1.5.1.6.1.10.1.5 | INTEGER | RO | 8 | |||||||||||||||||
column · INTEGER · read-only · current Average Usage of specified CPU.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanDisk | 1.3.6.1.4.1.1332.1.1.5.1.6.2 | ||||||||||||||||||||
| TmsanDiskTable | 1.3.6.1.4.1.1332.1.1.5.1.6.2.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDiskEntry | 1.3.6.1.4.1.1332.1.1.5.1.6.2.1.1 | NA | |||||||||||||||||||
| CmsanDiskType | 1.3.6.1.4.1.1332.1.1.5.1.6.2.1.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Disk type.
| |||||||||||||||||||||
| CmsanDiskTotalSpace | 1.3.6.1.4.1.1332.1.1.5.1.6.2.1.1.2 | Unsigned32 | RO | 10720680 | |||||||||||||||||
column · Unsigned32 · read-only · current Total disk space of selected type.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiskFreeSpace | 1.3.6.1.4.1.1332.1.1.5.1.6.2.1.1.3 | Unsigned32 | RO | 8809756 | |||||||||||||||||
column · Unsigned32 · read-only · current Free disk space of selected type.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiskUsedSpace | 1.3.6.1.4.1.1332.1.1.5.1.6.2.1.1.4 | Unsigned32 | RO | 1344540 | |||||||||||||||||
column · Unsigned32 · read-only · current Used disk space of selected type.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanMemory | 1.3.6.1.4.1.1332.1.1.5.1.6.3 | ||||||||||||||||||||
| SmsanMemoryTotal | 1.3.6.1.4.1.1332.1.1.5.1.6.3.1 | Unsigned32 | RO | 5989844 | |||||||||||||||||
scalar · Unsigned32 · read-only · current Description.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanMemoryFree | 1.3.6.1.4.1.1332.1.1.5.1.6.3.2 | Unsigned32 | RO | 1591772 | |||||||||||||||||
scalar · Unsigned32 · read-only · current Description.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanMemoryAllocated | 1.3.6.1.4.1.1332.1.1.5.1.6.3.3 | Unsigned32 | RO | 4398072 | |||||||||||||||||
scalar · Unsigned32 · read-only · current Description.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanAdditionalConf | 1.3.6.1.4.1.1332.1.1.5.3 | ||||||||||||||||||||
| NmsanSystem | 1.3.6.1.4.1.1332.1.1.5.3.1 | ||||||||||||||||||||
| SmsanDateTime | 1.3.6.1.4.1.1332.1.1.5.3.1.1 | OCTET STRING | RW | 22/10/2026 15:20:34 | |||||||||||||||||
scalar · OCTET STRING · read-write · current Board date and time in format: dd/MM/yyyy HH:mm:ss. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanShelfIdConf | 1.3.6.1.4.1.1332.1.1.5.3.1.2 | OCTET STRING | RW | MEA | |||||||||||||||||
scalar · OCTET STRING · read-write · current MSAN Shelf ID. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanConfData | 1.3.6.1.4.1.1332.1.1.5.3.1.3 | INTEGER | RO | saved(1) | |||||||||||||||||
scalar · INTEGER · read-only · current Configured data saved or not saved to file on local file system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSwUpgrade | 1.3.6.1.4.1.1332.1.1.5.3.1.4 | OCTET STRING | RW | deprecated | | ||||||||||||||||
scalar · OCTET STRING · read-write · deprecated msanSWUpgrade parameetr is used to start SW upgrade from external http or ftp server. User must set the next string value: <repository URL> <package name> [|reboot|] <repository URL> = http|ftp://<IP>|<hostname>[:<port>]/[<path>/] Procedure uses anonymous type of identification. If a non standard port is used, this port must be also specified in the repository URL. 'reboot' option is used only on boards with multiple SW packages support. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanCliScriptCreate | 1.3.6.1.4.1.1332.1.1.5.3.1.5 | OCTET STRING (SIZE (0..32)) | RW | | |||||||||||||||||
scalar · OCTET STRING (SIZE (0..32)) · read-write · current When set with a non-empty string, current configuration will be saved to script file with that name (name must end with .scr). If file already exists it's overwritten. On Get request this object will always return an empty string. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanCliScriptTable | 1.3.6.1.4.1.1332.1.1.5.3.1.6 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanCliScriptEntry | 1.3.6.1.4.1.1332.1.1.5.3.1.6.1 | NA | |||||||||||||||||||
| CmsanCliScriptName | 1.3.6.1.4.1.1332.1.1.5.3.1.6.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current CLI script name | |||||||||||||||||||||
| CmsanCliScriptApply | 1.3.6.1.4.1.1332.1.1.5.3.1.6.1.2 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current When set to enable(1) selected selected CLI script is applied.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanCliScriptApplyStatus | 1.3.6.1.4.1.1332.1.1.5.3.1.6.1.3 | INTEGER | RO | notInitiated(1) | |||||||||||||||||
column · INTEGER · read-only · current Status of CLI script apply request
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanCliScriptRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.1.6.1.4 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanCliPrompt | 1.3.6.1.4.1.1332.1.1.5.3.1.7 | OCTET STRING (SIZE (0..64)) | RW | Iskratel switching | |||||||||||||||||
scalar · OCTET STRING (SIZE (0..64)) · read-write · current CLI prompt value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanChassisId | 1.3.6.1.4.1.1332.1.1.5.3.1.8 | Integer32 (1..99) | RW | 99 | |||||||||||||||||
scalar · Integer32 (1..99) · read-write · current MSAN Chassis ID. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanSwBootPackageTable | 1.3.6.1.4.1.1332.1.1.5.3.1.9 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanSwBootPackageEntry | 1.3.6.1.4.1.1332.1.1.5.3.1.9.1 | NA | |||||||||||||||||||
| CmsanSwBootPackageName | 1.3.6.1.4.1.1332.1.1.5.3.1.9.1.1 | DisplayString | RO | AN9920CP_1.1.0.0.019 | |||||||||||||||||
column · DisplayString · read-only · current SW package name on local disk. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSwBootPackageStatus | 1.3.6.1.4.1.1332.1.1.5.3.1.9.1.2 | INTEGER | RW | backup(3) | |||||||||||||||||
column · INTEGER · read-write · current SW package status. You can set only nextActive(2) value. Other values are read-only.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanSystemSwUpgrade | 1.3.6.1.4.1.1332.1.1.5.3.1.10 | ||||||||||||||||||||
| SmsanSystemSwUpgradeStart | 1.3.6.1.4.1.1332.1.1.5.3.1.10.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Control of SW upgrade procedure. When set to enable(1) transfer of SW package from defined server is started.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeStatus | 1.3.6.1.4.1.1332.1.1.5.3.1.10.2 | INTEGER | RO | notInitiated(4) | |||||||||||||||||
scalar · INTEGER · read-only · current The SW upgrade status info.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeServerIpAddressType | 1.3.6.1.4.1.1332.1.1.5.3.1.10.3 | InetAddressType | RW | 1 | |||||||||||||||||
scalar · InetAddressType · read-write · current Specifies the type of the upgrade server address: ipv4[1], ipv6[2]. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeServerIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.1.10.4 | InetAddress | RW | | |||||||||||||||||
scalar · InetAddress · read-write · current The remote SW upgrade server IP address. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeServerDnsName | 1.3.6.1.4.1.1332.1.1.5.3.1.10.5 | DisplayString | RW | | |||||||||||||||||
scalar · DisplayString · read-write · current The remote SW upgrade server dns name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeProtocol | 1.3.6.1.4.1.1332.1.1.5.3.1.10.6 | INTEGER | RW | tftp(1) | |||||||||||||||||
scalar · INTEGER · read-write · current The SW upgrade protocol.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeProtocolPortId | 1.3.6.1.4.1.1332.1.1.5.3.1.10.7 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
scalar · Integer32 (-1..65535) · read-write · current The SW upgrade protocol port number. If value is set to -1, standard protocol number is used. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeUserName | 1.3.6.1.4.1.1332.1.1.5.3.1.10.8 | DisplayString | RW | | |||||||||||||||||
scalar · DisplayString · read-write · current The username used in SW upgrade protocol. When sftp upgrade protocol is used, username must be set. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeUserPassword | 1.3.6.1.4.1.1332.1.1.5.3.1.10.9 | DisplayString | RW | | |||||||||||||||||
scalar · DisplayString · read-write · current The user password used in SW upgrade protocol. When sftp upgrade protocol is used, username must be set. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradePath | 1.3.6.1.4.1.1332.1.1.5.3.1.10.10 | DisplayString | RW | | |||||||||||||||||
scalar · DisplayString · read-write · current The path to the SW package location. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradePackageName | 1.3.6.1.4.1.1332.1.1.5.3.1.10.11 | DisplayString | RW | | |||||||||||||||||
scalar · DisplayString · read-write · current The SW package name Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemSwUpgradeStatusAddInfo | 1.3.6.1.4.1.1332.1.1.5.3.1.10.20 | DisplayString | RO | | |||||||||||||||||
scalar · DisplayString · read-only · current SW upgrade status additional info. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanSystemLogsUpload | 1.3.6.1.4.1.1332.1.1.5.3.1.11 | ||||||||||||||||||||
| SmsanSystemLogsUploadStart | 1.3.6.1.4.1.1332.1.1.5.3.1.11.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Control of system logs upload procedure. When set to enable_active(1) transfer of file from active board to defined server is started. When set to enable_standby(3) transfer of file from standby (peer) board to defined server is started.
| |||||||||||||||||||||
| SmsanSystemLogsUploadStatus | 1.3.6.1.4.1.1332.1.1.5.3.1.11.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The system logs upload status info.
| |||||||||||||||||||||
| SmsanSystemLogsUploadServerIpAddressType | 1.3.6.1.4.1.1332.1.1.5.3.1.11.3 | InetAddressType | RW | ||||||||||||||||||
scalar · InetAddressType · read-write · current Specifies the type of the system logs upload server address: ipv4[1], ipv6[2]. | |||||||||||||||||||||
| SmsanSystemLogsUploadServerIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.1.11.4 | InetAddress | RW | ||||||||||||||||||
scalar · InetAddress · read-write · current The remote system logs upload server IP address. | |||||||||||||||||||||
| SmsanSystemLogsUploadServerDnsName | 1.3.6.1.4.1.1332.1.1.5.3.1.11.5 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The remote system logs upload server dns name. | |||||||||||||||||||||
| SmsanSystemLogsUploadProtocol | 1.3.6.1.4.1.1332.1.1.5.3.1.11.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system logs upload protocol.
| |||||||||||||||||||||
| SmsanSystemLogsUploadProtocolPortId | 1.3.6.1.4.1.1332.1.1.5.3.1.11.7 | Integer32 (-1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (-1..65535) · read-write · current The system logs upload protocol port number. If value is set to -1, standard protocol number is used. | |||||||||||||||||||||
| SmsanSystemLogsUploadUserName | 1.3.6.1.4.1.1332.1.1.5.3.1.11.8 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The username used in system logs upload protocol. When sftp upgrade protocol is used, username must be set. | |||||||||||||||||||||
| SmsanSystemLogsUploadUserPassword | 1.3.6.1.4.1.1332.1.1.5.3.1.11.9 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The user password used in system logs upload protocol. When sftp upgrade protocol is used, username must be set. | |||||||||||||||||||||
| SmsanSystemLogsUploadPath | 1.3.6.1.4.1.1332.1.1.5.3.1.11.10 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The path to the system logs file location. | |||||||||||||||||||||
| SmsanSystemLogsUploadFileName | 1.3.6.1.4.1.1332.1.1.5.3.1.11.11 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The system logs file name | |||||||||||||||||||||
| NmsanSystemAutoSaveConfig | 1.3.6.1.4.1.1332.1.1.5.3.1.12 | ||||||||||||||||||||
| SmsanSystemAutoSaveConfigStatus | 1.3.6.1.4.1.1332.1.1.5.3.1.12.1 | INTEGER | RO | inactive(2) | |||||||||||||||||
scalar · INTEGER · read-only · current Description.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemAutoSaveConfigMaxTimeout | 1.3.6.1.4.1.1332.1.1.5.3.1.12.2 | Integer32 | RO | 120 | |||||||||||||||||
scalar · Integer32 · read-only · current Initial (max) number of seconds until timer for automatic saveconfig elapses. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSystemAutoSaveConfigCurrTimeout | 1.3.6.1.4.1.1332.1.1.5.3.1.12.3 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current Current number of seconds until timer for automatic saveconfig elapses. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanConfFileType | 1.3.6.1.4.1.1332.1.1.5.3.1.13 | INTEGER | RO | manual(2) | |||||||||||||||||
scalar · INTEGER · read-only · current Last saved configuration status denotes whether current configuration file has been built by automatic or manual cli/snmp or manual mns procedure.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanHttpServer | 1.3.6.1.4.1.1332.1.1.5.3.1.14 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current HTTP server activity.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanProfiles | 1.3.6.1.4.1.1332.1.1.5.3.3 | ||||||||||||||||||||
| TmsanVDSLProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanVDSLProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.1.1 | NA | |||||||||||||||||||
| CmsanVDSLProfileType | 1.3.6.1.4.1.1332.1.1.5.3.3.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Profile type: - other ~ none of the following - defaut ~ default profile - local ~ local configured profile type - global ~ global configured profile type
| |||||||||||||||||||||
| CmsanVDSL2LineProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current VDSL2 profile
| |||||||||||||||||||||
| NmsanServiceProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.2 | ||||||||||||||||||||
| TmsanServiceProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current Service Profile table | |||||||||||||||||||||
| RmsanServiceProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1 | NA | |||||||||||||||||||
| CmsanServiceProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.1 | DisplayString (SIZE (1..64)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..64)) · not-accessible · current Name for service profile. | |||||||||||||||||||||
| CmsanServiceProfileProtection | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.2 | INTEGER | RW | obsolete | protected(1) | ||||||||||||||||
column · INTEGER · read-write · obsolete If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanServiceProfileStatus = dynamic(2)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.3 | INTEGER | RO | obsolete | static(1) | ||||||||||||||||
column · INTEGER · read-only · obsolete Profile status. If status is dynamic, profile values can't be edited.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileServiceFlowProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.4 | DisplayString | RW | DEFAULT | |||||||||||||||||
column · DisplayString · read-write · current Index of used service flow profile (this profile must be set before), which indicates row in msanServiceFlowProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileMulticastProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.5 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Index of used multicast profile (this profile must be set before), which indicates row in msanMulticastProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileVlanProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.6 | DisplayString | RW | DEFAULT | |||||||||||||||||
column · DisplayString · read-write · current Index of used vlan profile (this profile must be set before), which indicates row in msanVlanProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileL2cpProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.7 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Index of used L2CP profile (this profile must be set before), which indicates row in msanL2cpProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileSecurityProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.8 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Index of used security profile (this profile must be set before), which indicates row in msanSecurityProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileAtmVpi | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.9 | Integer32 (-1..255) | RW | 0 | |||||||||||||||||
column · Integer32 (-1..255) · read-write · current Virtual Path Identifier. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileAtmVci | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.10 | Integer32 (-1 | 32..65535) | RW | 0 | |||||||||||||||||
column · Integer32 (-1 | 32..65535) · read-write · current Virtual Channel Identifier. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRa | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.11 | INTEGER | RW | disable(0) | |||||||||||||||||
column · INTEGER · read-write · current Dynamic Host Configuration Protocol Relay Agent. DHCP RA and PPPoE IA can not be included simultaneously.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaTrustClients | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.12 | INTEGER | RW | notTrust(0) | |||||||||||||||||
column · INTEGER · read-write · current DHCP RA Trust Clients. Effective only if DHCP-RA is in either allow-all or allow-client mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaOpt82UnicastExtension | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.13 | INTEGER | RW | notUsed(0) | |||||||||||||||||
column · INTEGER · read-write · current DHCP RA option82 unicast extension. Effective only if DHCP-RA is in either allow-all or allow-client mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaOpt82Insert | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.14 | INTEGER | RW | notInsert(0) | |||||||||||||||||
column · INTEGER · read-write · current DHCP Relay Agent Insert Option 82. Effective only if DHCP-RA is in either allow-all or allow-client mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaRemoteId | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.15 | OCTET STRING (SIZE (0..63)) | RW | deprecated | | ||||||||||||||||
column · OCTET STRING (SIZE (0..63)) · read-write · deprecated DHCP Relay Agent Remote Identification. Effective only if DHCP-RA is in either allow-all or allow-client mode. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaRateLimit | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.16 | Unsigned32 (0..1000) | RW | 5 | |||||||||||||||||
column · Unsigned32 (0..1000) · read-write · current Max rate for DHCP Relay Agent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfilePppoeIA | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.17 | INTEGER | RW | disable(0) | |||||||||||||||||
column · INTEGER · read-write · current Point-to-Point Protocol over Ethernet Intermediate Agent. DHCP RA and PPPoE IA can not be included simultaneously.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfilePppoeIARateLimit | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.18 | Unsigned32 (0..1000) | RW | 5 | |||||||||||||||||
column · Unsigned32 (0..1000) · read-write · current Max rate for PPPoE IA. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDescription | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.19 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Attribute specifies text which describes the associated object. | |||||||||||||||||||||
| CmsanServiceProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.20 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). Value active(1) will activate and value destroy(6) will remove this entry. Other values are currently not supported. Row can be activated only if msanServiceProfileServiceFlowProfileName is specified. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaInterfaceIdStandard | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.21 | INTEGER | RW | deprecated | disable(2) | ||||||||||||||||
column · INTEGER · read-write · deprecated DHCP RA Standard Interface Id (Circuit Id) syntax mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpv6Ra | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.22 | INTEGER | RW | disable(0) | |||||||||||||||||
column · INTEGER · read-write · current State of DHCPv6 Relay Agent on the port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpv6RaTrustClients | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.23 | INTEGER | RW | notTrust(0) | |||||||||||||||||
column · INTEGER · read-write · current DHCPv6 Relay Agent Trust Clients. Effective only if DHCPv6-RA is in allow-client mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpv6RaInterfaceIdStandard | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.24 | INTEGER | RW | deprecated | enable(1) | ||||||||||||||||
column · INTEGER · read-write · deprecated DHCPv6 RA Standard Interface Id syntax mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpv6RaRemoteId | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.25 | OCTET STRING | RW | deprecated | | ||||||||||||||||
column · OCTET STRING · read-write · deprecated DHCPv6 Remote Id value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpv6RaRemoteIdEnterpriseNum | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.26 | INTEGER (1..999999) | RW | 1332 | |||||||||||||||||
column · INTEGER (1..999999) · read-write · current DHCPv6 Remote Id enterprise number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaCircuitIdType | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.27 | INTEGER | RW | iskratel(1) | |||||||||||||||||
column · INTEGER · read-write · current DHCP Circuit Id syntax mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfilePPPoeIACircuitIdType | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.28 | INTEGER | RW | iskratel(1) | |||||||||||||||||
column · INTEGER · read-write · current PPPoE Circuit Id syntax mode per port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaCircuitIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.29 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current DHCP Circuit Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEXExample values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpRaRemoteIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.30 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current DHCP Remote Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEXExample values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfilePPPoeIACircuitIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.31 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current PPPoE Circuit Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEXExample values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfilePPPoeIARemoteIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.32 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current PPPoE Remote Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEXExample values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileDhcpv6RaInterfaceIdType | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.33 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current DHCPv6 Interface Id syntax mode.
| |||||||||||||||||||||
| CmsanServiceProfileDhcpv6RaInterfaceIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.34 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current DHCPv6 Interface Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEX | |||||||||||||||||||||
| CmsanServiceProfileDhcpv6RaRemoteIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.35 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current DHCPv6 Remote Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEX | |||||||||||||||||||||
| CmsanServiceProfileOnuFlowProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.50 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Index of used ONU Flow profile (this profile must be set before), which indicates row in msanOnuFlowProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileOnuVlanProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.51 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Index of used ONU Vlan profile (this profile must be set before), which indicates row in msanOnuVlanProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileOnuMulticastProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.52 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Index of used ONU Multicast profile (this profile must be set before), which indicates row in msanOnuMulticastProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileOnuTcontProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.53 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Index of used ONU T-CONT profile (this profile must be set before), which indicates row in msanOnuTcontProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileOnuVirtGemPortId | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.54 | Integer32 (1..32) | RW | 1 | |||||||||||||||||
column · Integer32 (1..32) · read-write · current Virtual GEM Port ID. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileOnuTpType | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.55 | INTEGER | RW | veip(1) | |||||||||||||||||
column · INTEGER · read-write · current ONU termination point type.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileOnuTpUniBitMap | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.56 | OCTET STRING (SIZE (0..2)) | RW | 80:00 | |||||||||||||||||
column · OCTET STRING (SIZE (0..2)) · read-write · current ONU Ethernet UNI ports bitmap (max 16 ports). This parameter can be set only when msanServiceProfileOnuTpType has value ethernetUni(3). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.57 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| CmsanServiceProfileOnuAcsServerProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.58 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Index of used ONU ACS Server profile (this profile must be set before), which indicates row in msanOnuAcsServerProfileTable. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceProfileOnuAcsServerVeipId | 1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.59 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete ONU Veip ID which is used for ACS Server configuration defined in relevant msanServiceProfileOnuAcsServerProfileTable instance. | |||||||||||||||||||||
| TmsanServicePortProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A connection between service profiles and device ports | |||||||||||||||||||||
| RmsanServicePortProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Service Profile Port table entry. In case of GPON access blade, ifIndex for ONU interface (ifDescr=0/x/y) is calculated with formula: ifIndex=max_olt_port_number(8 or 16)+(x-1)*128+y | |||||||||||||||||||||
| CmsanServicePortProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1.1 | RowStatus | RC | 0 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndGo(4) or createAndWait(5). Setting this object to destroy(6) will remove this entry. When row is created you can't change values of parameters in this row. Read values: active(1). Other values are currently not supported. In case of GPON access blade, ifIndex for ONU interface (ifDescr=0/x/y) is calculated with formula: ifIndex=max_olt_port_number(8 or 16)+(x-1)*128+y Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServicePortProfileOnuTpUniBitMap | 1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1.2 | OCTET STRING (SIZE (0..2)) | RC | 00:00 | |||||||||||||||||
column · OCTET STRING (SIZE (0..2)) · read-create · current ONU Ethernet UNI ports bitmap (max 16 ports). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServicePortDataCVid | 1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1.3 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current C-VLAN Id. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServicePortDataSVid | 1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1.4 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current S-VLAN Id. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanServiceFlowProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.3 | ||||||||||||||||||||
| TmsanServiceFlowProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current Service Flow Profile table | |||||||||||||||||||||
| RmsanServiceFlowProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1 | NA | |||||||||||||||||||
| CmsanServiceFlowProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.1 | DisplayString (SIZE (1..32)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · not-accessible · current Service Flow Profile Name. | |||||||||||||||||||||
| CmsanServiceFlowProfileProtection | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.2 | INTEGER | RW | obsolete | protected(1) | ||||||||||||||||
column · INTEGER · read-write · obsolete If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanServiceFlowProfileStatus = dynamic(2)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.3 | INTEGER | RO | obsolete | static(1) | ||||||||||||||||
column · INTEGER · read-only · obsolete Profile status. If status is dynamic, profile values can't be edited.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsAny | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.4 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Match every upstream packet frame.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsMacDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.5 | MacAddress | RW | | |||||||||||||||||
column · MacAddress · read-write · current Match upstream packet frame with specified destination MAC address. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsMacDestMask | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.6 | MacAddress | RW | | |||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchUsMacDestAddr that is compared with upstream packet. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsMacSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.7 | MacAddress | RW | | |||||||||||||||||
column · MacAddress · read-write · current Match upstream packet frame with specified source MAC address. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsMacSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.8 | MacAddress | RW | | |||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchUsMacSrcAddr that is compared with upstream packet. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsCPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.9 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current Match upstream packet frame with specified Customer PCP (Priority Code Point) - PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsSPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.10 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current Match upstream packet frame with specified Service PCP (Priority Code Point). PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsVlanProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.11 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Match upstream packet frame with VLAN Id values from VLAN Service Profile (msanVlanProfileTable).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsCVlanIdRange | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.12 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · current Match upstream packet frame with specified list (bitmask) of Customer VLAN Id. An empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsSVlanIdRange | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.13 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · current Match upstream packet frame with specified list (bitmask) of Service VLAN Id. An empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsEthertype | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.14 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match upstream packet frame with specified EtherType value. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpProtocol | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.15 | Integer32 (-1..255) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..255) · read-write · current Match upstream packet frame with specified IP protocol value. A value of -1 indicates that parameter has not been defined. Some of standard protocol values: icmp - 1 igmp - 2 ip - 4 (ip in ip encapsulation) tcp - 6 udp - 17 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.16 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current Match upstream packet frame with specified source IP address. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.17 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchUsIpSrcAddr that is compared with upstream packet. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.18 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current Match upstream packet frame with specified destination IP address. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpDestMask | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.19 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchUsIpDestAddr that is compared with upstream packet. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpDscp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.20 | Integer32 (-1..63) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..63) · read-write · current Match upstream packet frame with specified CSC (Class Selector Code Point) = IP precedence (part of TOS field) value. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpCsc | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.21 | Integer32 (-1..7) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match upstream packet frame with specified IP precedence (part of TOS field) value. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpDropPrecedence | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.22 | INTEGER | RW | notDefined(-1) | |||||||||||||||||
column · INTEGER · read-write · current Match upstream packet frame with specified Drop precedence two bits value: noDrop(0) -> 00 lowDrop(1) -> 01 mediumDrop(2) -> 10 highDrop(3) -> 11 A value of -1 indicates that parameter has not been defined.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsTcpSrcPort | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.23 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match upstream packet frame with specified source TCP port number. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsTcpDestPort | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.24 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match upstream packet frame with specified destination TCP port number. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsUdpSrcPort | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.25 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match upstream packet frame with specified source UDP port number. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsUdpDstPort | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.26 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match upstream packet frame with specified destination UDP port number. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsAny | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.27 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Match every downstream packet frame.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsMacDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.28 | MacAddress | RW | | |||||||||||||||||
column · MacAddress · read-write · current Match downstream packet frame with specified destination MAC address. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsMacDestMask | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.29 | MacAddress | RW | | |||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchDsMacDestAddr that is compared with downstream packet. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsMacSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.30 | MacAddress | RW | | |||||||||||||||||
column · MacAddress · read-write · current Match downstream packet frame with specified source MAC address. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsMacSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.31 | MacAddress | RW | | |||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchDsMacSrcAddr that is compared with downstream packet. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsCPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.32 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current Match downstream packet frame with specified Customer PCP (Priority Code Point) - PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsSPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.33 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current Match downstream packet frame with specified Service PCP (Priority Code Point). PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsVlanProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.34 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Match downstream packet frame with VLAN Id values from VLAN Service Profile (msanVlanProfileTable).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsCVlanIdRange | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.35 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · current Match downstream packet frame with specified list (bitmask) of Customer VLAN Id. An emptya string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsSVlanIdRange | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.36 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · current Match downstream packet frame with specified list (bitmask) of Service VLAN Id. An empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsEthertype | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.37 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match downstream packet frame with specified EtherType value. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpProtocol | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.38 | Integer32 (-1..255) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..255) · read-write · current Match downstream packet frame with specified IP protocol value. A value of -1 indicates that parameter has not been defined. Some of standard protocol values: icmp - 1 igmp - 2 ip - 4 (ip in ip encapsulation) tcp - 6 udp - 17 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.39 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current Match downstream packet frame with specified source IP address. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.40 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchDsIpSrcAddr that is compared with downstream packet. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.41 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current Match downstream packet frame with specified destination IP address. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpDestMask | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.42 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchDsIpDestAddr that is compared with downstream packet. Empty string indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpDscp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.43 | Integer32 (-1..63) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..63) · read-write · current Match downstream packet frame with specified IP DSCP value. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpCsc | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.44 | Integer32 (-1..7) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match downstream packet frame with specified CSC (Class Selector Code Point) = IP precedence (part of TOS field) value. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpDropPrecedence | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.45 | INTEGER | RW | notDefined(-1) | |||||||||||||||||
column · INTEGER · read-write · current Match downstream packet frame with specified Drop precedence two bits value: noDrop(0) -> 00 lowDrop(1) -> 01 mediumDrop(2) -> 10 highDrop(3) -> 11 A value of -1 indicates that parameter has not been defined.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsTcpSrcPort | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.46 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match downstream packet frame with specified source TCP port number. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsTcpDestPort | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.47 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match downstream packet frame with specified destination TCP port number. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsUdpSrcPort | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.48 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match downstream packet frame with specified source UDP port number. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsUdpDstPort | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.49 | Integer32 (-1..65535) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match downstream packet frame with specified destination UDP port number. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsCdr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.50 | Integer32 (0..1000000) | RW | 0 | |||||||||||||||||
column · Integer32 (0..1000000) · read-write · current Upstream committed data rate (E-CDR) in kbps (0 1000000).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsCdrBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.51 | Integer32 (0..16384) | RW | 0 | |||||||||||||||||
column · Integer32 (0..16384) · read-write · current Upstream committed data rate burst size in kB (0 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileInCdr value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsPdr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.52 | Integer32 (0..1000000) | RW | 0 | |||||||||||||||||
column · Integer32 (0..1000000) · read-write · current Upstream peak data rate (E-PDR) in kbps (0 1000000).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsPdrBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.53 | Integer32 (0..16384) | RW | 0 | |||||||||||||||||
column · Integer32 (0..16384) · read-write · current Upstream peak data rate burst size in kB (0 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileInPdr value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsMarkPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.54 | INTEGER | RW | none(1) | |||||||||||||||||
column · INTEGER · read-write · current Type of upstrem PCP marking. If set to userValue(3), parameter msanServiceFlowProfileUsMarkPcpValue is used. A value of none(1) indicates that parameter has not been defined
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsMarkPcpValue | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.55 | INTEGER (-1..7) | RW | -1 | |||||||||||||||||
column · INTEGER (-1..7) · read-write · current Mark upstream packets with specified PCP (Priority Code Point) value (0-7) = CoS. A value of -1 indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsMarkDscp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.56 | INTEGER | RW | none(1) | |||||||||||||||||
column · INTEGER · read-write · current Type of upstrem DSCP marking. If set to userValue(3), parameter msanServiceFlowProfileUsMarkDscpValue is used. A value of none(1) indicates that parameter has not been defined
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsMarkDscpValue | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.57 | INTEGER (-1..63) | RW | -1 | |||||||||||||||||
column · INTEGER (-1..63) · read-write · current Mark upstream packets with specified DSCP (Diffserv Code Point) value (0-63). A value of -1 indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsCdr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.58 | Integer32 (0..1000000) | RW | 0 | |||||||||||||||||
column · Integer32 (0..1000000) · read-write · current Downstream committed data rate (E-CDR) in kbps (0 1000000).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsCdrBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.59 | Integer32 (0..16384) | RW | 0 | |||||||||||||||||
column · Integer32 (0..16384) · read-write · current Downstream committed data rate burst size in kB (0 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileOutCdr value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsPdr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.60 | Integer32 (0..1000000) | RW | 0 | |||||||||||||||||
column · Integer32 (0..1000000) · read-write · current Downstream peak data rate (E-PDR) in kbps (0 1000000).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsPdrBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.61 | Integer32 (0..16384) | RW | 0 | |||||||||||||||||
column · Integer32 (0..16384) · read-write · current Downstream peak data rate burst size in kB (0 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileOutCdr value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsMarkPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.62 | INTEGER | RW | none(1) | |||||||||||||||||
column · INTEGER · read-write · current Type of downstream PCP marking. If set to userValue(3), parameter msanServiceFlowProfileDsMarkPcpValue is used. A value of none(1) indicates that parameter has not been defined
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsMarkPcpValue | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.63 | INTEGER (-1..7) | RW | -1 | |||||||||||||||||
column · INTEGER (-1..7) · read-write · current Mark downstream packets with specified PCP (Priority Code Point) value (0-7) = CoS. A value of -1 indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsMarkDscp | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.64 | INTEGER | RW | none(1) | |||||||||||||||||
column · INTEGER · read-write · current Type of downstrem DSCP marking. If set to userValue(3), parameter msanServiceFlowProfileDsMarkDscpValue is used. A value of none(1) indicates that parameter has not been defined
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsMarkDscpValue | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.65 | INTEGER (-1..63) | RW | -1 | |||||||||||||||||
column · INTEGER (-1..63) · read-write · current Mark downstream packets with specified DSCP (Diffserv Code Point) value (0-63). A value of -1 indicates that parameter has not been defined Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsQueuingPriority | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.66 | INTEGER (0..7) | RW | 0 | |||||||||||||||||
column · INTEGER (0..7) · read-write · current Queuing Priority of Service Flow Profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDsSchedulingMode | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.67 | INTEGER | RW | weighted(1) | |||||||||||||||||
column · INTEGER · read-write · current Scheduling Mode
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileDescription | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.68 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Attribute specifies text which describes the associated object. | |||||||||||||||||||||
| CmsanServiceFlowProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.69 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpv6SrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.70 | InetAddressIPv6 | RW | | |||||||||||||||||
column · InetAddressIPv6 · read-write · current Match upstream packet frame with specified source IPv6 address. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpv6SrcAddrMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.71 | Integer32 (0..128) | RW | 0 | |||||||||||||||||
column · Integer32 (0..128) · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchUsIpv6SrcAddr that is compared with upstream packet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpv6DestAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.72 | InetAddressIPv6 | RW | | |||||||||||||||||
column · InetAddressIPv6 · read-write · current Match upstream packet frame with specified destination IPv6 address. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchUsIpv6DestAddrMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.73 | Integer32 (0..128) | RW | 0 | |||||||||||||||||
column · Integer32 (0..128) · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchUsIpv6DestAddr that is compared with upstream packet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpv6SrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.74 | InetAddressIPv6 | RW | | |||||||||||||||||
column · InetAddressIPv6 · read-write · current Match downstream packet frame with specified source IPv6 address. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpv6SrcAddrMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.75 | Integer32 (0..128) | RW | 0 | |||||||||||||||||
column · Integer32 (0..128) · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchDsIpv6SrcAddr that is compared with downstream packet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpv6DestAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.76 | InetAddressIPv6 | RW | | |||||||||||||||||
column · InetAddressIPv6 · read-write · current Match downstream packet frame with specified destination IPv6 address. Empty string indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileMatchDsIpv6DestAddrMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.77 | Integer32 (0..128) | RW | 0 | |||||||||||||||||
column · Integer32 (0..128) · read-write · current This mask value identifies the portion of msanServiceFlowProfileMatchDsIpv6DestAddr that is compared with downstrem packet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanServiceFlowProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.78 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| NmsanVlanProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.4 | ||||||||||||||||||||
| TmsanVlanProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current Vlan Profile table | |||||||||||||||||||||
| RmsanVlanProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1 | NA | |||||||||||||||||||
| CmsanVlanProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.1 | DisplayString (SIZE (1..32)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · not-accessible · current Name for the VLAN profile. | |||||||||||||||||||||
| CmsanVlanProfileProtection | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.2 | INTEGER | RW | obsolete | protected(1) | ||||||||||||||||
column · INTEGER · read-write · obsolete If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanVlanProfileStatus = dynamic(2)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.3 | INTEGER | RO | obsolete | static(1) | ||||||||||||||||
column · INTEGER · read-only · obsolete Profile status. If status is dynamic, profile values can't be edited.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileCVid | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.4 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · current Customer VLANs Identification (bit mask). | |||||||||||||||||||||
| CmsanVlanProfileCVidNative | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.5 | Integer32 (-1..4094) | RW | 1 | |||||||||||||||||
column · Integer32 (-1..4094) · read-write · current Nativ C-VLAN Id. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileCVidRemark | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.6 | Integer32 (-1..4094) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..4094) · read-write · current Remark C-VLAN Id. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileSVid | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.7 | Integer32 (-1..4094) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..4094) · read-write · current S-VLAN Id. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileSEtherType | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.8 | Integer32 | RW | 34984 | |||||||||||||||||
column · Integer32 · read-write · current Ether Type value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileDescription | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.10 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Attribute specifies text which describes the associated object. | |||||||||||||||||||||
| CmsanVlanProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.11 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileNetworkPortCTag | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.12 | INTEGER | RW | notUse(2) | |||||||||||||||||
column · INTEGER · read-write · current Usage of C-VLAN tag on network port. If assigned as notUse(2) in upstream direction, C-VLAN tag is removed.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| CmsanVlanProfileCVidExternal | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.14 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Use external parameter msanProfilePortDataCVid as C-VLAN Id.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileCVidNativeExternal | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.15 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Use external parameter msanProfilePortDataCVid as Native C-VLAN Id.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileCVidRemarkExternal | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.16 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Use external parameter msanProfilePortDataCVid as Remark C-VLAN Id.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanVlanProfileSVidExternal | 1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.17 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Use external parameter msanProfilePortDataSVid as S-VLAN Id.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanVlanPortProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.4.2 | NA | |||||||||||||||||||
table · not-accessible · current A connection between VLAN profiles and device ports | |||||||||||||||||||||
| RmsanVlanPortProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Service Profile Port table entry. In case of GPON access blade, ifIndex for ONU interface (ifDescr=0/x/y) is calculated with formula: ifIndex=max_olt_port_number(8 or 16)+(x-1)*128+y
| |||||||||||||||||||||
| CmsanVlanPortProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.4.2.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. In case of GPON access blade, ifIndex for ONU interface (ifDescr=0/x/y) is calculated with formula: ifIndex=max_olt_port_number(8 or 16)+(x-1)*128+y | |||||||||||||||||||||
| NmsanMulticastProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.5 | ||||||||||||||||||||
| TmsanMulticastProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1 | NA | |||||||||||||||||||
table · not-accessible · current Multicast Profile table | |||||||||||||||||||||
| RmsanMulticastProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1 | NA | |||||||||||||||||||
| CmsanMulticastProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.1 | DisplayString (SIZE (1..32)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · not-accessible · current Name for the Multicast profile. | |||||||||||||||||||||
| CmsanMulticastProfileProtection | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.2 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanMulticastProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanMulticastProfileStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.3 | INTEGER | RO | obsolete | |||||||||||||||||
column · INTEGER · read-only · obsolete Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| CmsanMulticastProfileIgmpSnooping | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IGMP snnoping
| |||||||||||||||||||||
| CmsanMulticastProfileIgmpSnoopingFastLeave | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IGMP Snooping Fast Leave.
| |||||||||||||||||||||
| CmsanMulticastProfileIgmpSnoopingSuppression | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IGMP Snooping Suppression.
| |||||||||||||||||||||
| CmsanMulticastProfileIgmpProxy | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IGMP proxy.
| |||||||||||||||||||||
| CmsanMulticastProfileIgmpProxyIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.8 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current IGMP proxy IP address. | |||||||||||||||||||||
| CmsanMulticastProfileIgmpFiltering | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IGMP filtering.
| |||||||||||||||||||||
| CmsanMulticastProfileMulticastGroupLimit | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.10 | Unsigned32 (0..30) | RW | ||||||||||||||||||
column · Unsigned32 (0..30) · read-write · current Multicast group limit. A value of 0 indicates not limit. | |||||||||||||||||||||
| CmsanMulticastProfileMvr | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Multicast VLAN Registration.
| |||||||||||||||||||||
| CmsanMulticastProfileDescription | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.12 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Attribute specifies text which describes the associated object. | |||||||||||||||||||||
| CmsanMulticastProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.13 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| CmsanMulticastProfileIgmpProxyProtocolVersion | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IGMP version of IGMP message sent by Proxy in downstream direction.
| |||||||||||||||||||||
| CmsanMulticastProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| TmsanMulticastProfileStaticGroupTable | 1.3.6.1.4.1.1332.1.1.5.3.3.5.2 | NA | |||||||||||||||||||
table · not-accessible · current Connection between multicast_profile and multicast_static_group table | |||||||||||||||||||||
| RmsanMulticastProfileStaticGroupEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Multicast Profile Group table entry. | |||||||||||||||||||||
| CmsanMulticastProfileStaticGroupIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current Description. | |||||||||||||||||||||
| CmsanMulticastProfileStaticGroupRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1.9 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanSecurityProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.6 | ||||||||||||||||||||
| TmsanSecurityProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1 | NA | |||||||||||||||||||
table · not-accessible · current Security Profile table | |||||||||||||||||||||
| RmsanSecurityProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1 | NA | |||||||||||||||||||
| CmsanSecurityProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.1 | DisplayString (SIZE (1..32)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · not-accessible · current Name of the security profile. | |||||||||||||||||||||
| CmsanSecurityProfileProtection | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.2 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanSecurityProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanSecurityProfileStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.3 | INTEGER | RO | obsolete | |||||||||||||||||
column · INTEGER · read-only · obsolete Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| CmsanSecurityProfileProtectedPort | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Security profile protected port
| |||||||||||||||||||||
| CmsanSecurityProfileMacSg | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Mac source guard
| |||||||||||||||||||||
| CmsanSecurityProfileMacLimit | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.6 | Unsigned32 (0..64) | RW | ||||||||||||||||||
column · Unsigned32 (0..64) · read-write · current MAC limit A value of 0 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanSecurityProfilePortSecurity | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Port security
| |||||||||||||||||||||
| CmsanSecurityProfileIpSg | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IP source guard
| |||||||||||||||||||||
| CmsanSecurityProfileIpSgBindingLimit | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.9 | Unsigned32 (0..15) | RW | ||||||||||||||||||
column · Unsigned32 (0..15) · read-write · current IP source guard binding limit. Value 0 defines there is no limit. | |||||||||||||||||||||
| CmsanSecurityProfileIpSgFilteringMode | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IP source guard filtering mode
| |||||||||||||||||||||
| CmsanSecurityProfileArpInspec | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Dynamic ARP inspection
| |||||||||||||||||||||
| CmsanSecurityProfileMacForward | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.13 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current MAC forwarding
| |||||||||||||||||||||
| CmsanSecurityProfileDescription | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.14 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Attribute specifies text which describes the associated object. | |||||||||||||||||||||
| CmsanSecurityProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.15 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| CmsanSecurityProfileIpSgIpv6 | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IPv6 source guard
| |||||||||||||||||||||
| CmsanSecurityProfileIpSgBindingLimitDhcpv6 | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.17 | Unsigned32 (0..15) | RW | ||||||||||||||||||
column · Unsigned32 (0..15) · read-write · current IPSG binding limit for DHCPv6 (IPv6 DHCP). Value 0 defines there is no limit. | |||||||||||||||||||||
| CmsanSecurityProfileIpSgBindingLimitND | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.18 | Unsigned32 (0..15) | RW | ||||||||||||||||||
column · Unsigned32 (0..15) · read-write · current IPSG binding limit for ND (IPv6 Neighbor Discovery). Value 0 defines there is no limit. | |||||||||||||||||||||
| CmsanSecurityProfileStormControlBroadcast | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.19 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Max data rate (pps) of broadcast packets on port at which storm control drops them. Value -1 defines that functionality is disabled.
| |||||||||||||||||||||
| CmsanSecurityProfileStormControlMulticast | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.20 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Max data rate (pps) of multicast packets on port at which storm control drops them. Value -1 defines that functionality is disabled.
| |||||||||||||||||||||
| CmsanSecurityProfileStormControlUnicast | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.21 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Max data rate (pps) of unicast packets on port at which storm control drops them. Value -1 defines that functionality is disabled.
| |||||||||||||||||||||
| CmsanSecurityProfileAppRateLimitDhcp | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.22 | Integer32 (-1..1000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000) · read-write · current Max data rate (pps) of DHCP packets on port at which application rate limit drops them. Value -1 defines that functionality is disabled.
| |||||||||||||||||||||
| CmsanSecurityProfileAppRateLimitIgmp | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.23 | Integer32 (-1..1000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000) · read-write · current Max data rate (pps) of IGMP packets on port at which application rate limit drops them. Value -1 defines that functionality is disabled.
| |||||||||||||||||||||
| CmsanSecurityProfileAppRateLimitPppoe | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.24 | Integer32 (-1..1000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000) · read-write · current Max data rate (pps) of PPPoE packets on port at which application rate limit drops them. Value -1 defines that functionality is disabled.
| |||||||||||||||||||||
| CmsanSecurityProfileAppRateLimitStp | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.25 | Integer32 (-1..1000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000) · read-write · current Max data rate (pps) of STP packets on port at which application rate limit drops them. Value -1 defines that functionality is disabled.
| |||||||||||||||||||||
| CmsanSecurityProfileAppRateLimitMn | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.26 | Integer32 (-1..1000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000) · read-write · current Max data rate (pps) of IP packets on MN CPU port at which application rate limit drops them. Value -1 defines that functionality is disabled.
| |||||||||||||||||||||
| CmsanSecurityProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.27 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| TmsanSecurityAclProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.6.3 | NA | |||||||||||||||||||
table · not-accessible · current A connection between security profiles and access lists | |||||||||||||||||||||
| RmsanSecurityAclProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Service Profile Port table entry. | |||||||||||||||||||||
| CmsanSecurityAclProfileAclDirection | 1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The direction to which this ACL instance applies.
| |||||||||||||||||||||
| CmsanSecurityAclProfileSequence | 1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.2 | Unsigned32 (1..2147483647) | NA | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · not-accessible · current The relative evaluation sequence of this ACL for this interface and direction. When multiple ACLs are allowed for a given interface and direction, the sequence number determines the order in which the list of ACLs are evaluated, with lower sequence numbers given higher precedence. The sequence number value is arbitrary, but must be a unique non-zero value for a given interface and direction. Setting this object to an existing sequence number value for a given interface and direction causes the ACL corresponding to that value to be replaced with this ACL. | |||||||||||||||||||||
| CmsanSecurityAclProfileAclType | 1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.3 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The type of this ACL, which is used to interpret the aclIfId object value.
| |||||||||||||||||||||
| CmsanSecurityAclProfileAclId | 1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.4 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current The ACL identifier value. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, IP extended ranges from 100-199, and IP advanced ranges 200-299. | |||||||||||||||||||||
| CmsanSecurityAclProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanL2cpProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.7 | ||||||||||||||||||||
| TmsanL2cpProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.7.1 | NA | |||||||||||||||||||
table · not-accessible · current L2CP (Layer 2 Control Protocol) Profile table | |||||||||||||||||||||
| RmsanL2cpProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1 | NA | |||||||||||||||||||
| CmsanL2cpProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.1 | DisplayString (SIZE (1..32)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · not-accessible · current Name of the L2CP profile. | |||||||||||||||||||||
| CmsanL2cpProfileProtection | 1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.2 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanL2cpProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanL2cpProfileStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.3 | INTEGER | RO | obsolete | |||||||||||||||||
column · INTEGER · read-only · obsolete Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| CmsanL2cpProfileDescription | 1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.4 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Attribute specifies text which describes the associated object. | |||||||||||||||||||||
| CmsanL2cpProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| CmsanL2cpProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| TmsanL2cpProtocolTable | 1.3.6.1.4.1.1332.1.1.5.3.3.7.2 | NA | |||||||||||||||||||
table · not-accessible · current Table with list of L2CP protocols | |||||||||||||||||||||
| RmsanL2cpProtocolEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1 | NA | |||||||||||||||||||
| CmsanL2cpProtocolName | 1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.1 | DisplayString (SIZE (1..32)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · not-accessible · current L2CP protocol name | |||||||||||||||||||||
| CmsanL2cpProtocolMacDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.2 | MacAddress | RW | 01:00:0c:cc:cc:cc | |||||||||||||||||
column · MacAddress · read-write · current MAC destination address of L2CP protocol. Empty string indicates that protocol is related to any MAC address. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanL2cpProtocolEthertype | 1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.3 | Integer32 (0..65535) | RW | 8192 | |||||||||||||||||
column · Integer32 (0..65535) · read-write · current L2CP protocol Ethertype. A value of 65535 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanL2cpProtocolSubtype | 1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.4 | Integer32 (0..255) | RW | 255 | |||||||||||||||||
column · Integer32 (0..255) · read-write · current L2CP protocol subtype. A value of 255 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanL2cpProtocolRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.5 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). Value active(1) will activate and value destroy(6) will remove this entry. Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanL2cpProfileProtocolTable | 1.3.6.1.4.1.1332.1.1.5.3.3.7.3 | NA | |||||||||||||||||||
table · not-accessible · current Table with connection between profiles and protocols | |||||||||||||||||||||
| RmsanL2cpProfileProtocolEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1 | NA | |||||||||||||||||||
| CmsanL2cpProfileProtocolRule | 1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current L2CP protocol rule.
| |||||||||||||||||||||
| CmsanL2cpProfileProtocolRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). Value active(1) will activate and value destroy(6) will remove this entry. Other values are currently not supported. Row can be activated only when msanL2cpProfileProtocolRule is set. | |||||||||||||||||||||
| TmsanL2cpProfileVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.3.7.4 | NA | |||||||||||||||||||
table · not-accessible · current Table is used for connecting l2cp profile with vlan_id. | |||||||||||||||||||||
| RmsanL2cpProfileVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.7.4.1 | NA | |||||||||||||||||||
| CmsanL2cpProfileVlanRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.7.4.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanXdslProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.8 | ||||||||||||||||||||
| TmsanXdsl2LineConfTemplateTable | 1.3.6.1.4.1.1332.1.1.5.3.3.8.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanXdsl2LineConfTemplateEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1 | NA | |||||||||||||||||||
| CmsanXdsl2LineConfTempProtection | 1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanAclProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanXdsl2LineConfTempStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| TmsanXdsl2LineAlarmConfTemplateTable | 1.3.6.1.4.1.1332.1.1.5.3.3.8.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanXdsl2LineAlarmConfTemplateEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1 | NA | |||||||||||||||||||
| CmsanXdsl2LineAlarmConfTempProtection | 1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanAclProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanXdsl2LineAlarmConfTempStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| NmsanOnuFlowProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.20 | ||||||||||||||||||||
| TmsanOnuFlowProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuFlowProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1 | NA | |||||||||||||||||||
| CmsanOnuFlowProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.1 | DisplayString (SIZE (0..64)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · not-accessible · current ONU Flow Profile Name. | |||||||||||||||||||||
| CmsanOnuFlowProfileMatchUsCVlanIdRange | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.10 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · current Match ONU upstream packet frame with specified list (bitmask) of Customer VLAN Id. An empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanOnuFlowProfileMatchUsCPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.11 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current Match ONU upstream packet frame with specified Customer PCP (Priority Code Point) - PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuFlowProfileUsCdr | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.12 | Integer32 (128..2500000) | RW | 128 | |||||||||||||||||
column · Integer32 (128..2500000) · read-write · current ONU upstream committed data rate (E-CDR) in kbps. Any rate value can be entered, but is rounded up to the multiple of 64 kbps. Limitation: Commited rate cannot be higher than peak rate.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuFlowProfileUsPdr | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.13 | Integer32 (128..2500000) | RW | 9953280 | |||||||||||||||||
column · Integer32 (128..2500000) · read-write · current ONU upstream peak data rate (E-PDR) in kbps. Any rate value can be entered, but is rounded up to the multiple of 64 kbps. Limitation: Peak rate cannot be lower than guaranteed rate.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuFlowProfileUsFlowPriority | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.14 | INTEGER (0..7) | RW | 0 | |||||||||||||||||
column · INTEGER (0..7) · read-write · current ONU upstream flow priority . Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuFlowProfileDsFlowPriority | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.15 | INTEGER (0..7) | RW | 0 | |||||||||||||||||
column · INTEGER (0..7) · read-write · current ONU downstream flow priority . Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuFlowProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.50 | RowStatus | RW | 1 | |||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuFlowProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.51 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| CmsanOnuFlowProfileDsOnuScheduling | 1.3.6.1.4.1.1332.1.1.5.3.3.20.1.1.52 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ONU downstream onu scheduling
| |||||||||||||||||||||
| NmsanOnuVlanProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.21 | ||||||||||||||||||||
| TmsanOnuVlanProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1 | NA | |||||||||||||||||||
table · not-accessible · current description | |||||||||||||||||||||
| RmsanOnuVlanProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1.1 | NA | |||||||||||||||||||
| CmsanOnuVlanProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1.1.1 | DisplayString (SIZE (1..64)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..64)) · not-accessible · current ONU Vlan Profile Name. | |||||||||||||||||||||
| CmsanOnuVlanProfileDownstreamMode | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1.1.2 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Enable maping in downstream direction also. When enabled, downstream tagging operation is performed in inverse order of that in upstream direction. When disabled, all downstream frames are forwarded unmodified.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileInputTPID | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1.1.3 | Unsigned32 | RW | 33024 | |||||||||||||||||
column · Unsigned32 · read-write · current Input TPID (Tag Protocol Identifier). Default value is 0x8100. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileOutputTPID | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1.1.4 | Unsigned32 | RW | 33024 | |||||||||||||||||
column · Unsigned32 · read-write · current Output TPID (Tag Protocol Identifier). Default value is 0x88A8. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1.1.50 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1.1.51 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| CmsanOnuVlanProfileDscpPcpMap | 1.3.6.1.4.1.1332.1.1.5.3.3.21.1.1.52 | INTEGER | RW | disable(1) | |||||||||||||||||
column · INTEGER · read-write · current DSCP to PCP mapping
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOnuVlanProfileRuleTable | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2 | NA | |||||||||||||||||||
table · not-accessible · current description | |||||||||||||||||||||
| RmsanOnuVlanProfileRuleEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1 | NA | |||||||||||||||||||
| CmsanOnuVlanProfileRuleId | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current ONU Vlan Rule Index. | |||||||||||||||||||||
| CmsanOnuVlanProfileRuleMatchSVlanId | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.4 | Integer32 (-1..4096) | RW | 4096 | |||||||||||||||||
column · Integer32 (-1..4096) · read-write · current Match frames with selected S-VLAN (outer) ID: 0 .. 4094 Match received frames with this S-VLAN ID. 4096 Match received frames without S-TAG. -1 Do not match by S-VLAN ID (Default). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleMatchSPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.5 | Integer32 (-1..7) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match frames with selected S-PCP (outer) value: 0..7 Match received frames on this S-PCP priority (P bit) value. -1 Do not match on S-PCP (default). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleMatchSTPID | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.6 | INTEGER | RW | do-not-match(0) | |||||||||||||||||
column · INTEGER · read-write · current Match frames with selected S-TPID (outer): 0 do not match on S-TPID 1 match on S-TPID value 0x8100 2 match on value of parameter msanOnuVlanProfileInputTPID
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleMatchCVlanId | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.7 | Integer32 (-1..4096) | RW | 4096 | |||||||||||||||||
column · Integer32 (-1..4096) · read-write · current Match frames with selected C-VLAN (inner) ID: 0 .. 4094 Match received frames with this C-VLAN ID. 4096 Match received frames without C-TAG. -1 Do not match by C-VLAN ID (Default). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleMatchCPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.8 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current Match frames with selected C-PCP (inner) value: 0..7 Match received frames on this C-PCP priority (P bit) value. -1 Do not match on C-PCP (default). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleMatchCTPID | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.9 | INTEGER | RW | do-not-match(0) | |||||||||||||||||
column · INTEGER · read-write · current Match frames with selected C-TPID (inner): 0 do not match on C-TPID 1 match on C-TPID value 0x8100 2 match on value of parameter msanOnuVlanProfileInputTPID
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleMatchEthertype | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.11 | INTEGER | RW | do-not-match(0) | |||||||||||||||||
column · INTEGER · read-write · current Match frames with selected Ethertype value. Standard values: IPoE(1) 0x0800 PPPoE(2) 0x8863 or 0x8864 ARP(3) 0x0806 IPv6(4) 0x86DD A value 0 indicates that parameter is not used for match criteria.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleRemoveTags | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.12 | INTEGER | RW | do-not-remove(1) | |||||||||||||||||
column · INTEGER · read-write · current VLAN tags to remove.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleAddSTag | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.13 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Add a S-TAG.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleAddSPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.14 | INTEGER (0..10) | RW | 0 | |||||||||||||||||
column · INTEGER (0..10) · read-write · current Set priority in added S-TAG: 0..7 insert this priority value to the S-TAG 8 copy the C-TAG priority value of the received frame. 9 copy the S-TAG priority value of the received frame. 10 copy the DSCP value of the received frame. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleAddSVlanId | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.15 | Integer32 (0..4097) | RW | 0 | |||||||||||||||||
column · Integer32 (0..4097) · read-write · current Set VID in added S-TAG: 000..4094 Use this value as the VID in the added S-TAG. 4096 copy the C-VID value of the received frame. 4097 copy the S-VID value of the received frame. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleAddSTPID | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.16 | INTEGER | RW | set-value-33024(1) | |||||||||||||||||
column · INTEGER · read-write · current Set TPID in added S-TAG: 0 do not change (use default value) 1 set to value 0x8100 2 copy the value of parameter msanOnuVlanProfileOutputTPID 3 copy the C-TPID value of the received frame. 4 copy the S-TPID value of the received frame.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleAddCTag | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.17 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Add a S-TAG.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleAddCPcp | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.18 | INTEGER (0..10) | RW | 0 | |||||||||||||||||
column · INTEGER (0..10) · read-write · current Set priority in added C-TAG: 0..7 insert this priority value to the C-TAG 8 copy the C-TAG priority value of the received frame. 9 copy the S-TAG priority value of the received frame. 10 copy the DSCP value of the received frame. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleAddCVlanId | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.19 | Integer32 (0..4097) | RW | 10 | |||||||||||||||||
column · Integer32 (0..4097) · read-write · current Set VID in added C-TAG: 000..4094 Use this value as the VID in the added C-TAG. 4096 copy the C-VID value of the received frame. 4097 copy the S-VID value of the received frame. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleAddCTPID | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.20 | INTEGER | RW | set-value-33024(1) | |||||||||||||||||
column · INTEGER · read-write · current Set TPID in added S-TAG: 0 do not change (use default value) 1 set to value 0x8100 2 copy the value of parameter msanOnuVlanProfileOutputTPID 3 copy the C-TPID value of the received frame. 4 copy the S-TPID value of the received frame.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVlanProfileRuleRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.21.2.1.50 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6) ). Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanOnuMulticastProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.22 | ||||||||||||||||||||
| TmsanOnuMulticastProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuMulticastProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1 | NA | |||||||||||||||||||
| CmsanOnuMulticastProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.1 | DisplayString (SIZE (1..64)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..64)) · not-accessible · current ONU Multicast Profile Name. | |||||||||||||||||||||
| CmsanOnuMulticastProfileIgmpMode | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ONU IGMP Mode.
| |||||||||||||||||||||
| CmsanOnuMulticastProfileIgmpProxy | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ONU IGMP Proxy admin state.
| |||||||||||||||||||||
| CmsanOnuMulticastProfileIgmpSnoopingFastLeave | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ONU IGMP Snooping Fast Leave admin state.
| |||||||||||||||||||||
| CmsanOnuMulticastProfileUsIgmpTciVlanId | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.13 | INTEGER (0..4094) | RW | ||||||||||||||||||
column · INTEGER (0..4094) · read-write · current ONU Upstream IGMP TCI (Tag Control Information) VLAN ID. Value 0 means that parameter is not defined. | |||||||||||||||||||||
| CmsanOnuMulticastProfileUsIgmpTciPcpValue | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.14 | Integer32 (-1..7) | RW | ||||||||||||||||||
column · Integer32 (-1..7) · read-write · current ONU Upstream IGMP TCI (Tag Control Information) PCP (Priority Code Point) value (0-7) = CoS. | |||||||||||||||||||||
| CmsanOnuMulticastProfileUsIgmpTciCtrlMode | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ONU Upstream IGMP TCI (Tag Control Information) Control mode.
| |||||||||||||||||||||
| CmsanOnuMulticastProfileDsVlanTagging | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ONU Downstream tagging of multicast traffic.
| |||||||||||||||||||||
| CmsanOnuMulticastProfileDsGemPort | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.17 | Integer32 (3800..4000) | RW | ||||||||||||||||||
column · Integer32 (3800..4000) · read-write · current Downstream multicast GEM port number. Standard values are 3800 - 3999. Default value is 4000 (Undefined). | |||||||||||||||||||||
| CmsanOnuMulticastProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.50 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| CmsanOnuMulticastProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.22.1.1.51 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| NmsanOnuTcontProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.23 | ||||||||||||||||||||
| TmsanOnuTcontProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuTcontProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1 | NA | |||||||||||||||||||
| CmsanOnuTcontProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1.1 | DisplayString (SIZE (1..64)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..64)) · not-accessible · current ONU T-CONT Profile Name. | |||||||||||||||||||||
| CmsanOnuTcontProfileTcontId | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1.10 | INTEGER (1..8) | RW | 1 | |||||||||||||||||
column · INTEGER (1..8) · read-write · current ONU T-CONT index. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuTcontProfileTcontType | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1.11 | INTEGER (1..5) | RW | 5 | |||||||||||||||||
column · INTEGER (1..5) · read-write · current ONU T-CONT type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuTcontProfileFixedDataRate | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1.12 | Integer32 (128..2500000) | RW | 0 | |||||||||||||||||
column · Integer32 (128..2500000) · read-write · current ONU T-CONT Fixed data rate. Any rate value can be entered, but is rounded up to the multiple of 64 kbps. Limitation: Maximum rate cannot be lower than the sum of fixed and assured rates.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuTcontProfileAssuredDataRate | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1.13 | Integer32 (0..2500000) | RW | 0 | |||||||||||||||||
column · Integer32 (0..2500000) · read-write · current ONU T-CONT Assured data rate (256 - 2500000 kbps). Default value is 0, meaning that no rate is configured. Any rate value can be entered, but is rounded up to the multiple of 64 kbps. Limitation: Maximum rate cannot be lower than the sum of fixed and assured rates.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuTcontProfileMaxDataRate | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1.14 | Integer32 (128..2500000) | RW | 9953280 | |||||||||||||||||
column · Integer32 (128..2500000) · read-write · current ONU T-CONT Maximum data rate. Any rate value can be entered, but is rounded up to the multiple of 64 kbps. Limitation: Maximum rate cannot be lower than the sum of fixed and assured rates
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuTcontProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1.50 | RowStatus | RW | 1 | |||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuTcontProfileUsage | 1.3.6.1.4.1.1332.1.1.5.3.3.23.1.1.51 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile usage. If profile is attached, profile values can't be edited.
| |||||||||||||||||||||
| NmsanOnuAcsServerProfile | 1.3.6.1.4.1.1332.1.1.5.3.3.24 | ||||||||||||||||||||
| TmsanOnuAcsServerProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuAcsServerProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1 | NA | |||||||||||||||||||
| CmsanOnuAcsServerProfileName | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.1 | DisplayString | NA | ||||||||||||||||||
column · DisplayString · not-accessible · current Name of ONU ACS Server Profile | |||||||||||||||||||||
| CmsanOnuAcsServerProfileUrl | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.2 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current URL of the ACS server in form: <http|https>://<IP>|<hostname>[:<port>][/<path>] | |||||||||||||||||||||
| CmsanOnuAcsServerProfileUserName | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Username used for ACS Server connection. | |||||||||||||||||||||
| CmsanOnuAcsServerProfilePassword | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.4 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current Username used for ACS Server connection. | |||||||||||||||||||||
| CmsanOnuAcsServerProfileAddressType | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.5 | InetAddressType | RW | obsolete | |||||||||||||||||
column · InetAddressType · read-write · obsolete Specifies the type of the ACS Server IP address: unknown(0), ipv4(1), ipv6(2), dns(16) | |||||||||||||||||||||
| CmsanOnuAcsServerProfileAddress | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.6 | InetAddress | RW | obsolete | |||||||||||||||||
column · InetAddress · read-write · obsolete ACS Server IP address (or hostname) | |||||||||||||||||||||
| CmsanOnuAcsServerProfilePortId | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.7 | Integer32 (-1..65535) | RW | obsolete | |||||||||||||||||
column · Integer32 (-1..65535) · read-write · obsolete ACS Service Port number If value is set to -1, standard protocol number is used. | |||||||||||||||||||||
| CmsanOnuAcsServerProfileProtocol | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.8 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete ACS Service Protocol
| |||||||||||||||||||||
| CmsanOnuAcsServerProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.24.1.1.9 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). Value active(1) will activate and value destroy(6) will remove this entry. Other values are currently not supported. Row can be created only when all required parameters are set: - msanOnuAcsServerProfileUrl - msanOnuAcsServerProfileUserName - msanOnuAcsServerProfilePassword | |||||||||||||||||||||
| TmsanProfilePortDataTable | 1.3.6.1.4.1.1332.1.1.5.3.3.50 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanProfilePortDataEntry | 1.3.6.1.4.1.1332.1.1.5.3.3.50.1 | NA | |||||||||||||||||||
row · not-accessible · current In case of GPON access blade, ifIndex for ONU interface (ifDescr=0/x/y) is calculated with formula: ifIndex=max_olt_port_number(8 or 16)+(x-1)*128+y
| |||||||||||||||||||||
| CmsanProfilePortDataCVid | 1.3.6.1.4.1.1332.1.1.5.3.3.50.1.1 | Integer32 (-1..4094) | RW | 487 | |||||||||||||||||
column · Integer32 (-1..4094) · read-write · current C-VLAN Id. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanProfilePortDataSVid | 1.3.6.1.4.1.1332.1.1.5.3.3.50.1.2 | Integer32 (-1..4094) | RW | -1 | |||||||||||||||||
column · Integer32 (-1..4094) · read-write · current S-VLAN Id. A value of -1 indicates that parameter has not been defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanProfileConfigStatus | 1.3.6.1.4.1.1332.1.1.5.3.3.100 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Profile configuration status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanDhcpRelay | 1.3.6.1.4.1.1332.1.1.5.3.4 | ||||||||||||||||||||
| NmsanDhcpRaGlobal | 1.3.6.1.4.1.1332.1.1.5.3.4.1 | ||||||||||||||||||||
| SmsanDhcpRaStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.1.1 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current DHCP Relay Agent status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaMode | 1.3.6.1.4.1.1332.1.1.5.3.4.1.2 | INTEGER | RW | simplified(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies if the DHCP Relay Agent mode is to be Simple or Full. Default value is Full.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaCircuitType | 1.3.6.1.4.1.1332.1.1.5.3.4.1.3 | INTEGER | RW | untrusted(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies DHCP RA Circuit type as trusted(1) or untrusted(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaOpt82 | 1.3.6.1.4.1.1332.1.1.5.3.4.1.4 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies DHCP Relay Agent general option 82 insertion status .
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaOpt82ReplyMode | 1.3.6.1.4.1.1332.1.1.5.3.4.1.5 | INTEGER | RW | remove(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies DHCP Relay Agent keep/remove option 82 in replies.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaOpt82CircuitIdStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.1.6 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies the disable/enable inserting Circuit ID suboption. Default value is Enable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaOpt82RemoteIdStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.1.7 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies the disable/enable inserting Remote ID suboption. Default value is Enable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaOpt82UnicastExtStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.1.8 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current The desired state of insertion of option 82 in unicast frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaFullModeSrvIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.4.1.9 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current The IP address of default DHCP Server for VLANs where DHCP RA is enabled in full mode (parameter msanDhcpRaVlanMode). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaOpt82CircuitIdInnerVlan | 1.3.6.1.4.1.1332.1.1.5.3.4.1.10 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Include Inner VLAN (C-VLAN) in Circuit Id when port is in DVLAN Tunneling mode (msanPortDVlanTagMode = enable).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaCircuitIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.4.1.11 | DisplayString | RW | | |||||||||||||||||
scalar · DisplayString · read-write · current DHCP Circuit Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEXExample values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaRemoteIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.4.1.12 | DisplayString | RW | $PORT_REM_ID | |||||||||||||||||
scalar · DisplayString · read-write · current DHCP Remote Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEXExample values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDhcpRaPortConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.4.2 | NA | |||||||||||||||||||
table · not-accessible · current Table od DHCP RA parameters per port. | |||||||||||||||||||||
| RmsanDhcpRaPortConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1 | NA | |||||||||||||||||||
| CmsanDhcpRaPortState | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.1 | INTEGER | RW | disable(4) | |||||||||||||||||
column · INTEGER · read-write · current State of DHCP Relay Agent on the port (enable, disable, enable-client, enable-server)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortCircuitId | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.2 | OCTET STRING | RO | ISKRATEL:MEA eth 1/gp/1:<vid> | |||||||||||||||||
column · OCTET STRING · read-only · current Option 82 Circuit Id for the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortRemoteId | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.3 | OCTET STRING | RW | | |||||||||||||||||
column · OCTET STRING · read-write · current Option 82 Remote Id for the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortMeter | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.4 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Enable or disable DHCP metering on port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortMaxDataRate | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.5 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current Allowed throughput of incoming DHCP traffic on a port (kb/s)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortCircuitType | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.6 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current Specifies DHCP RA Circuit type per port as trusted(1) or untrusted(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortOpt82 | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.7 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current Specifies DHCP Relay Agent option 82 insertion status per port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortOpt82ReplyMode | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.8 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current Specifies DHCP Relay Agent keep/remove option 82 in replies per port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortOpt82UnicastExtStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.9 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current The desired state of insertion of option 82 in unicast frames per port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaPortCircuitIdType | 1.3.6.1.4.1.1332.1.1.5.3.4.2.1.10 | INTEGER | RW | iskratel(1) | |||||||||||||||||
column · INTEGER · read-write · current Circuit Id syntax mode per port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDhcpRaFullModeVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.4.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDhcpRaFullModeVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanDhcpRaFullModeVlanId | 1.3.6.1.4.1.1332.1.1.5.3.4.3.1.1 | Integer32 (1..4094) | NA | ||||||||||||||||||
column · Integer32 (1..4094) · not-accessible · current The VLAN identifier (refers to dot1qVlanIndex) where DHCP Client resides. | |||||||||||||||||||||
| CmsanDhcpRaFullModeVlanSrvIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.4.3.1.2 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current The IP address of DHCP Server for specified VLAN. | |||||||||||||||||||||
| CmsanDhcpRaFullModeVlanRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.3.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanDhcpRaStatGlobal | 1.3.6.1.4.1.1332.1.1.5.3.4.4 | ||||||||||||||||||||
| SmsanDhcpRaStatGlobalDiscover | 1.3.6.1.4.1.1332.1.1.5.3.4.4.1 | Counter32 | RO | 21 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of DHCP DISCOVER packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalRequest | 1.3.6.1.4.1.1332.1.1.5.3.4.4.2 | Counter32 | RO | 30 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of DHCP REQUEST packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalOffer | 1.3.6.1.4.1.1332.1.1.5.3.4.4.3 | Counter32 | RO | 7 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of DHCP OFFER packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalACK | 1.3.6.1.4.1.1332.1.1.5.3.4.4.4 | Counter32 | RO | 10 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of DHCP ACKNOWLAGE (ACK) packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalNAK | 1.3.6.1.4.1.1332.1.1.5.3.4.4.5 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of NOT ACKNOWLAGE (NAK) packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalDecline | 1.3.6.1.4.1.1332.1.1.5.3.4.4.6 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of DHCP DECLINE packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalMaxPacketSizeExceeded | 1.3.6.1.4.1.1332.1.1.5.3.4.4.7 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of DHCP packets with max. packet size exceeded. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalFrameErr | 1.3.6.1.4.1.1332.1.1.5.3.4.4.8 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of DHCP packets with errors in frames. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalOpt82Present | 1.3.6.1.4.1.1332.1.1.5.3.4.4.9 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of DHCP packets with Option 82 or giaddr present. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalFrameUnsync | 1.3.6.1.4.1.1332.1.1.5.3.4.4.10 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of packets with frames not synchronized with state machines. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalStatRelease | 1.3.6.1.4.1.1332.1.1.5.3.4.4.11 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCP RELEASE packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpRaStatGlobalStatInform | 1.3.6.1.4.1.1332.1.1.5.3.4.4.12 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCP INFORM packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDhcpRaStatTable | 1.3.6.1.4.1.1332.1.1.5.3.4.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDhcpRaStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1 | NA | |||||||||||||||||||
| CmsanDhcpRaStatDiscover | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.1 | Counter32 | RO | 3 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP DISCOVER packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatRequest | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.2 | Counter32 | RO | 3 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP REQUEST packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatOffer | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.3 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP OFFER packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatACK | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.4 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP ACKNOWLAGE (ACK) packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatNAK | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.5 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP NOT ACKNOWLAGE (NAK) packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatDecline | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.6 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP DECLINE packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatMaxPacketSizeExceeded | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.7 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP packets with max. packet size exceeded. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatFrameErr | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.8 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP packets with errors in frames. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatOpt82Present | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.9 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP packets with Option 82 or giaddr present. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatFrameUnsync | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.10 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received packets with frames not synchronized with state machines. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatRelease | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.11 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP RELEASE packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaStatInform | 1.3.6.1.4.1.1332.1.1.5.3.4.5.1.12 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received DHCP INFORM packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDhcpRaVlanConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.4.6 | NA | |||||||||||||||||||
table · not-accessible · current Table od DHCP RA parameters per Vlan. | |||||||||||||||||||||
| RmsanDhcpRaVlanConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.6.1 | NA | |||||||||||||||||||
| CmsanDhcpRaVlanState | 1.3.6.1.4.1.1332.1.1.5.3.4.6.1.1 | INTEGER | RW | notConfigured(2) | |||||||||||||||||
column · INTEGER · read-write · current DHCP RA state for specified VLAN ID. Value notConfigured(2) means, that global setting is used(msanDhcpRaStatus).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaVlanMode | 1.3.6.1.4.1.1332.1.1.5.3.4.6.1.2 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current DHCP RA mode for specified VLAN ID. Value notConfigured(1) means, that global setting is used(msanDhcpRaMode).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaVlanOpt82 | 1.3.6.1.4.1.1332.1.1.5.3.4.6.1.3 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current Specifies DHCP Relay Agent option 82 insertion status per vlan.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaVlanOpt82ReplyMode | 1.3.6.1.4.1.1332.1.1.5.3.4.6.1.4 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current Specifies DHCP Relay Agent keep/remove option 82 in replies per vlan.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaVlanOpt82UnicastExtStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.6.1.5 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current The desired state of insertion of option 82 in unicast frames per vlan.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpRaVlanCircuitIdType | 1.3.6.1.4.1.1332.1.1.5.3.4.6.1.6 | INTEGER | RW | notConfigured(3) | |||||||||||||||||
column · INTEGER · read-write · current Circuit Id syntax mode per vlan.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDhcpRaPortVlanConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.4.7 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDhcpRaPortVlanConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.7.1 | NA | |||||||||||||||||||
| CmsanDhcpRaPortVlanRemoteId | 1.3.6.1.4.1.1332.1.1.5.3.4.7.1.1 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current The VLAN identifier (refers to dot1qVlanIndex) where DHCP Client resides. | |||||||||||||||||||||
| CmsanDhcpRaPortVlanConfigRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.7.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. | |||||||||||||||||||||
| CmsanDhcpRaPortVlanCircuitIdType | 1.3.6.1.4.1.1332.1.1.5.3.4.7.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Circuit Id syntax mode per vlan per port.
| |||||||||||||||||||||
| CmsanDhcpRaPortVlanCircuitId | 1.3.6.1.4.1.1332.1.1.5.3.4.7.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Option 82 Circuit Id per vlan per port. | |||||||||||||||||||||
| NmsanDhcpv6RaGlobal | 1.3.6.1.4.1.1332.1.1.5.3.4.100 | ||||||||||||||||||||
| SmsanDhcpv6RaState | 1.3.6.1.4.1.1332.1.1.5.3.4.100.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current DHCPv6 Relay Agent status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaMode | 1.3.6.1.4.1.1332.1.1.5.3.4.100.2 | INTEGER | RW | ldra(1) | |||||||||||||||||
scalar · INTEGER · read-write · current DHCPv6 Relay Agent mode. ldra = Lightweight DHCPRv6
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaInterfaceIdStandard | 1.3.6.1.4.1.1332.1.1.5.3.4.100.3 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current DHCPv6 RA Standard Interface Id type.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaInterfaceIdInnerVlan | 1.3.6.1.4.1.1332.1.1.5.3.4.100.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Include Inner VLAN (C-VLAN) in Circuit Id when port is in DVLAN Tunneling mode (msanPortDVlanTagMode = enable). | |||||||||||||||||||||
| SmsanDhcpv6RaInterfaceIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.4.100.5 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current DHCPv6 Interface Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEX | |||||||||||||||||||||
| SmsanDhcpv6RaRemoteIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.4.100.6 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current DHCPv6 Remote Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEX | |||||||||||||||||||||
| NmsanDhcpv6RaStatistics | 1.3.6.1.4.1.1332.1.1.5.3.4.101 | ||||||||||||||||||||
| TmsanDhcpv6RaPortStatTable | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDhcpv6RaPortStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1 | NA | |||||||||||||||||||
| CmsanDhcpv6PortRaStatSolicit | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 solicit packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatAdvertise | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 advertise packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatRequest | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 request packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatReply | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 reply packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatRenew | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 renew packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatRebind | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 rebind packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatDecline | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 decline packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatReconfigure | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 reconfigure packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatRelease | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 release packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatInformRequest | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 inform request packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatRelayForward | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 relay forward packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatRelayReply | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received DHCPv6 relay reply packets. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatOversizeError | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.100 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of discarded packets because max packet size exceeded. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatFrameError | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.101 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of discarded packets because frame error. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatFrameUnsyncError | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.102 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of received packets with frames not synchronized with state machines. | |||||||||||||||||||||
| CmsanDhcpv6PortRaStatSysError | 1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.103 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of discarded packets because system error. | |||||||||||||||||||||
| SmsanDhcpv6RaStatSolicit | 1.3.6.1.4.1.1332.1.1.5.3.4.101.100 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 solicit packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatAdvertise | 1.3.6.1.4.1.1332.1.1.5.3.4.101.101 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 advertise packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatRequest | 1.3.6.1.4.1.1332.1.1.5.3.4.101.102 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 request packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatReply | 1.3.6.1.4.1.1332.1.1.5.3.4.101.103 | Counter32 | RO | 8 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 reply packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatRenew | 1.3.6.1.4.1.1332.1.1.5.3.4.101.104 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 renew packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatRebind | 1.3.6.1.4.1.1332.1.1.5.3.4.101.105 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 rebind packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatDecline | 1.3.6.1.4.1.1332.1.1.5.3.4.101.106 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 decline packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatReconfigure | 1.3.6.1.4.1.1332.1.1.5.3.4.101.107 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 reconfigure packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatRelease | 1.3.6.1.4.1.1332.1.1.5.3.4.101.108 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 reconfigure packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatInformRequest | 1.3.6.1.4.1.1332.1.1.5.3.4.101.109 | Counter32 | RO | 8 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 inform request packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatRelayForward | 1.3.6.1.4.1.1332.1.1.5.3.4.101.110 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 Relay Forward packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatRelayReply | 1.3.6.1.4.1.1332.1.1.5.3.4.101.112 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received DHCPv6 Relay Reply packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatOversizeError | 1.3.6.1.4.1.1332.1.1.5.3.4.101.200 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of discarded packets because max packet size exceeded. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatFrameError | 1.3.6.1.4.1.1332.1.1.5.3.4.101.201 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of discareded packets because errors in frame. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatFrameUnsyncError | 1.3.6.1.4.1.1332.1.1.5.3.4.101.202 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received packets with frames not synchronized with state machines. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanDhcpv6RaStatSysError | 1.3.6.1.4.1.1332.1.1.5.3.4.101.203 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of discared packets because system error. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDhcpv6RaPortConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.4.102 | NA | |||||||||||||||||||
table · not-accessible · current Table od DHCP RA parameters per port. | |||||||||||||||||||||
| RmsanDhcpv6RaPortConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.102.1 | NA | |||||||||||||||||||
| CmsanDhcpv6RaPortState | 1.3.6.1.4.1.1332.1.1.5.3.4.102.1.1 | INTEGER | RW | disable(4) | |||||||||||||||||
column · INTEGER · read-write · current State of DHCPv6 Relay Agent on the port (enable, disable, enable-client, enable-server)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpv6RaPortTrusted | 1.3.6.1.4.1.1332.1.1.5.3.4.102.1.2 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Specifies DHCP RA Circuit type per port as trusted(1) or untrusted(2). Default value for user ports is untrusted(2) and for network ports trusted(1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpv6RaPortInterfaceIdStandard | 1.3.6.1.4.1.1332.1.1.5.3.4.102.1.3 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current DHCPv6 RA Standard Interface Id syntax mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpv6RaPortInterfaceId | 1.3.6.1.4.1.1332.1.1.5.3.4.102.1.4 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current DHCPv6 Interface Id. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpv6RaPortRemoteId | 1.3.6.1.4.1.1332.1.1.5.3.4.102.1.5 | OCTET STRING | RW | | |||||||||||||||||
column · OCTET STRING · read-write · current DHCPv6 Remote Id value for the port. If empty string, remote id is not added to DHCPv6 package. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpv6RaPortRemoteIdEnterpriseNum | 1.3.6.1.4.1.1332.1.1.5.3.4.102.1.6 | INTEGER (1..999999) | RW | 1332 | |||||||||||||||||
column · INTEGER (1..999999) · read-write · current DHCPv6 Remote Id enterprise number for the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDhcpv6RaVlanConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.4.103 | NA | |||||||||||||||||||
table · not-accessible · current Table od DHCP RA parameters per Vlan. | |||||||||||||||||||||
| RmsanDhcpv6RaVlanConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.103.1 | NA | |||||||||||||||||||
| CmsanDhcpv6RaVlanState | 1.3.6.1.4.1.1332.1.1.5.3.4.103.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current DHCP RA state for specified VLAN ID.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDhcpv6RaVlanInterfaceIdStandard | 1.3.6.1.4.1.1332.1.1.5.3.4.103.1.2 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current DHCPv6 RA Standard Interface Id syntax mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDhcpv6RaPortVlanConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.4.104 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDhcpv6RaPortVlanConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.4.104.1 | NA | |||||||||||||||||||
| CmsanDhcpv6RaPortVlanRemoteId | 1.3.6.1.4.1.1332.1.1.5.3.4.104.1.1 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current DHCPv6 Remote Id value for specified vlan_id per port. | |||||||||||||||||||||
| CmsanDhcpv6RaPortVlanRemoteIdEnterpriseNum | 1.3.6.1.4.1.1332.1.1.5.3.4.104.1.2 | INTEGER (1..999999) | RW | ||||||||||||||||||
column · INTEGER (1..999999) · read-write · current DHCPv6 Remote Id enterprise number for specified vlan_id per port. | |||||||||||||||||||||
| CmsanDhcpv6RaPortVlanRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.4.104.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. | |||||||||||||||||||||
| NmsanSntp | 1.3.6.1.4.1.1332.1.1.5.3.5 | ||||||||||||||||||||
| NmsanSntpGlobal | 1.3.6.1.4.1.1332.1.1.5.3.5.1 | ||||||||||||||||||||
| SmsanSntpTzOffset | 1.3.6.1.4.1.1332.1.1.5.3.5.1.1 | OCTET STRING | RW | 00:00 | |||||||||||||||||
scalar · OCTET STRING · read-write · current Specifies the time zone offset time in format hh:mm. Allowed range is -12 to 13. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzName | 1.3.6.1.4.1.1332.1.1.5.3.5.1.2 | OCTET STRING (SIZE (0..32)) | RW | NONE | |||||||||||||||||
scalar · OCTET STRING (SIZE (0..32)) · read-write · current Time Zone name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstOffset | 1.3.6.1.4.1.1332.1.1.5.3.5.1.3 | OCTET STRING | RW | 00:00 | |||||||||||||||||
scalar · OCTET STRING · read-write · current Specifies the daylight saving time offset time in format hh:mm. Allowed range is -12 to 13. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstStartMonth | 1.3.6.1.4.1.1332.1.1.5.3.5.1.4 | Integer32 (1..12) | RW | 3 | |||||||||||||||||
scalar · Integer32 (1..12) · read-write · current Specifies the daylight saving time start month. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstStartWeek | 1.3.6.1.4.1.1332.1.1.5.3.5.1.5 | Integer32 (1..5) | RW | 5 | |||||||||||||||||
scalar · Integer32 (1..5) · read-write · current Specifies the daylight saving time start week. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstStartDayInWeek | 1.3.6.1.4.1.1332.1.1.5.3.5.1.6 | INTEGER | RW | sunday(7) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies the daylight saving time start day in week.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstStartTime | 1.3.6.1.4.1.1332.1.1.5.3.5.1.7 | OCTET STRING | RW | 2:00 | |||||||||||||||||
scalar · OCTET STRING · read-write · current Specifies the daylight saving time start time. Allowed range is 00:00 to 23:59. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstEndMonth | 1.3.6.1.4.1.1332.1.1.5.3.5.1.8 | Integer32 (1..12) | RW | 10 | |||||||||||||||||
scalar · Integer32 (1..12) · read-write · current Specifies the daylight saving time end month. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstEndWeek | 1.3.6.1.4.1.1332.1.1.5.3.5.1.9 | Integer32 (1..5) | RW | 5 | |||||||||||||||||
scalar · Integer32 (1..5) · read-write · current Specifies the daylight saving time end week. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstEndDayInWeek | 1.3.6.1.4.1.1332.1.1.5.3.5.1.10 | INTEGER | RW | sunday(7) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies the daylight saving time end start day in week.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSntpTzDstEndTime | 1.3.6.1.4.1.1332.1.1.5.3.5.1.11 | OCTET STRING | RW | 2:00 | |||||||||||||||||
scalar · OCTET STRING · read-write · current Specifies the daylight saving time end time. Allowed range is 00:00 to 23:59 Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanSnmp | 1.3.6.1.4.1.1332.1.1.5.3.7 | ||||||||||||||||||||
| NmsanSnmpGlobal | 1.3.6.1.4.1.1332.1.1.5.3.7.1 | ||||||||||||||||||||
| SmsanSnmpTrapRecvUdpPort | 1.3.6.1.4.1.1332.1.1.5.3.7.1.1 | Unsigned32 (0..65535) | RW | 162 | |||||||||||||||||
scalar · Unsigned32 (0..65535) · read-write · current The UDP Port where SNMP traps are to be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIfOperStatusChangeCnt | 1.3.6.1.4.1.1332.1.1.5.3.7.1.2 | Integer32 | RO | 14 | |||||||||||||||||
scalar · Integer32 · read-only · current Interface operational status change counter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanSnmpNotifications | 1.3.6.1.4.1.1332.1.1.5.3.7.2 | ||||||||||||||||||||
| !msanSnmpOnuIfStatusChanged | 1.3.6.1.4.1.1332.1.1.5.3.7.2.1 | ||||||||||||||||||||
notification · current ONU interface status changed notification.
| |||||||||||||||||||||
| !msanSnmpOnuBlackListAdded | 1.3.6.1.4.1.1332.1.1.5.3.7.2.2 | ||||||||||||||||||||
notification · current ONU added to Blacklist notification. | |||||||||||||||||||||
| !msanSnmpOnuBlackListRemoved | 1.3.6.1.4.1.1332.1.1.5.3.7.2.3 | ||||||||||||||||||||
notification · current ONU removed from Blacklist notification. | |||||||||||||||||||||
| !msanSnmpIfStatusChanged | 1.3.6.1.4.1.1332.1.1.5.3.7.2.4 | ||||||||||||||||||||
notification · current Interface status changed notification. | |||||||||||||||||||||
| NmsanIgmpSnooping | 1.3.6.1.4.1.1332.1.1.5.3.8 | ||||||||||||||||||||
| NmsanIgmpSnoopingGlobal | 1.3.6.1.4.1.1332.1.1.5.3.8.1 | ||||||||||||||||||||
| SmsanIgmpSnoopingReportSuppression | 1.3.6.1.4.1.1332.1.1.5.3.8.1.1 | INTEGER | RW | disable(0) | |||||||||||||||||
scalar · INTEGER · read-write · current Report suppression mode for IGMP Snooping for the switch.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpSnoopingAdminState | 1.3.6.1.4.1.1332.1.1.5.3.8.1.2 | INTEGER | RW | enable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current IGMP snooping global state. Values enableAndUnknownGroupFlood(3) and enableAndMrouterFlood(4) are relevant only for MSAN Ethernet switch (ES) products, where enableAndUnknownGroupFlood(3) is supported only on IDC board.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpSnoopingLoggingVlanId | 1.3.6.1.4.1.1332.1.1.5.3.8.1.3 | Integer32 (0..4094) | RW | 0 | |||||||||||||||||
scalar · Integer32 (0..4094) · read-write · current VLAN Id on which IGMP snooping logging is performed. Value 0 means that logging is disabled. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpSnoopingViolationAction | 1.3.6.1.4.1.1332.1.1.5.3.8.1.4 | INTEGER | RW | discard(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Removing one of the existing (the oldest) multicast group membership, or discarding a new group membership request.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpSnoopingFastLeaveAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.8.1.5 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current This enables or disables IGMP Snooping Fast-Leave on user ports.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpSnoopingGroupMembershipInterval | 1.3.6.1.4.1.1332.1.1.5.3.8.1.6 | Integer32 (2..3600) | RW | 260 | |||||||||||||||||
scalar · Integer32 (2..3600) · read-write · current The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than msanIgmpSnoopingMaxResponseTime Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpSnoopingMaxResponseTime | 1.3.6.1.4.1.1332.1.1.5.3.8.1.7 | Integer32 (1..3599) | RW | 10 | |||||||||||||||||
scalar · Integer32 (1..3599) · read-write · current The amount of time in seconds a switch will wait on a report after sending a query on the selected interface. This value must be less than msanIgmpSnoopingGroupMembershipInterval Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpVersion | 1.3.6.1.4.1.1332.1.1.5.3.8.1.8 | INTEGER | RW | igmpVersion2(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Version of processed IGMP frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpClear | 1.3.6.1.4.1.1332.1.1.5.3.8.1.9 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Clear all IGMP snooping entries.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanIgmpSnoopingTable | 1.3.6.1.4.1.1332.1.1.5.3.8.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIgmpSnoopingEntry | 1.3.6.1.4.1.1332.1.1.5.3.8.2.1 | NA | |||||||||||||||||||
| CmsanIgmpSnoopingIntfStandaloneQuerier | 1.3.6.1.4.1.1332.1.1.5.3.8.2.1.1 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current Specify the period of time in seconds you want the IGMP Standalone Querier generate IGMP query packets. Value must be higher than msanIgmpSnoopingMaxResponseTime and lower than msanIgmpSnoopingGroupMembershipInterval or 0. The default is 0. A value of zero indicates that standalone querier is disabled. IGMP SA Querier can be activated only on one interface at the same time.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpSnoopingIntfFilter | 1.3.6.1.4.1.1332.1.1.5.3.8.2.1.2 | INTEGER | RW | allowReports(1) | |||||||||||||||||
column · INTEGER · read-write · current Filtering of IGMP join/leave reports or queries frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpSnoopingGroupLimit | 1.3.6.1.4.1.1332.1.1.5.3.8.2.1.3 | INTEGER (0..10) | RW | 0 | |||||||||||||||||
column · INTEGER (0..10) · read-write · current A maximum numbers of IGMP groups per interface. Value 0 means no limits. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanSwitchIGMPVlanCurrentMrouterTable | 1.3.6.1.4.1.1332.1.1.5.3.8.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanSwitchIGMPVlanCurrentMrouterEntry | 1.3.6.1.4.1.1332.1.1.5.3.8.3.1 | NA | |||||||||||||||||||
| CmsanSwitchIGMPVlanCurrentMrouterEnableState | 1.3.6.1.4.1.1332.1.1.5.3.8.3.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Returns per-interface per-vlan pairs where IGMP Mrouter is enabled. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanSwitchIGMPSnoopingStaticIntfMulticastRouterTable | 1.3.6.1.4.1.1332.1.1.5.3.8.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanSwitchIGMPSnoopingStaticIntfMulticastRouterEntry | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1 | NA | |||||||||||||||||||
| CmsanSwitchIGMPSnoopingIntfIndex | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1.1 | Unsigned32 (1..65535) | RO | ||||||||||||||||||
column · Unsigned32 (1..65535) · read-only · current The port number to be selected. Each port maps to an interface. | |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingIntfAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This enables or disables IGMP Snooping on a selected interface.
| |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingIntfGroupMembershipInterval | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1.3 | Integer32 (2..3600) | RW | deprecated | |||||||||||||||||
column · Integer32 (2..3600) · read-write · deprecated The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime. | |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingIntfMaxResponseTime | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1.4 | Integer32 (1..3599) | RW | deprecated | |||||||||||||||||
column · Integer32 (1..3599) · read-write · deprecated The amount of time in seconds a switch will wait after sending a query on the selected interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchIGMPSnoopingIntfGroupMembershipInterval. | |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingIntfMRPExpirationTime | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1.5 | Integer32 (0..3600) | RW | deprecated | |||||||||||||||||
column · Integer32 (0..3600) · read-write · deprecated The amount of time in seconds that a switch will wait for a query to be received on the selected interface before the interface is removed from the list of interfaces with multicast routers attached. | |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingIntfFastLeaveAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1.6 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This enables or disables IGMP Snooping Fast-Leave on specified interface.
| |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingStaticIntfMulticastRouterMode | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1.7 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Mode of static IGMP Mrouter on selected interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingIntfVlanIDs | 1.3.6.1.4.1.1332.1.1.5.3.8.4.1.8 | VlanList | RO | deprecated | |||||||||||||||||
column · VlanList · read-only · deprecated This field lists all the VlanIDs which include the selected interface. | |||||||||||||||||||||
| TmsanSwitchIGMPVlanStaticMrouterTable | 1.3.6.1.4.1.1332.1.1.5.3.8.5 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Description. | |||||||||||||||||||||
| RmsanSwitchIGMPVlanStaticMrouterEntry | 1.3.6.1.4.1.1332.1.1.5.3.8.5.1 | NA | deprecated | ||||||||||||||||||
| CmsanSwitchIGMPVlanStaticMrouterEnableState | 1.3.6.1.4.1.1332.1.1.5.3.8.5.1.1 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated Object used to create a new row or modify or destroy an existing row in manner described in the definition of the RowStatus textual. Supported states are Active(1), CreateAndGo(4) and Destroy(6). Row is created with CreateAndGo(4). This enables IGMP Mrouter on a per-interface per-vlan basis and the row goes to Active(1). The row is removed with Destroy(6) and IGMP Mrouter on this interface/VLAN pair is disabled. Values NotInService(2), NotReady(3) and CreateAndWait(5) are not supported. | |||||||||||||||||||||
| TmsanSwitchIGMPSnoopingVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.8.6 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IGMP Snooping Vlan configuration entries. | |||||||||||||||||||||
| RmsanSwitchIGMPSnoopingVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.8.6.1 | NA | |||||||||||||||||||
| CmsanSwitchIGMPSnoopingVlanAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.8.6.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This enables or disables IGMP Snooping on a selected Vlan interface.
| |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingVlanGroupMembershipInterval | 1.3.6.1.4.1.1332.1.1.5.3.8.6.1.2 | Integer32 (2..3600) | RW | deprecated | |||||||||||||||||
column · Integer32 (2..3600) · read-write · deprecated The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime. | |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingVlanMaxResponseTime | 1.3.6.1.4.1.1332.1.1.5.3.8.6.1.3 | Integer32 (1..3599) | RW | deprecated | |||||||||||||||||
column · Integer32 (1..3599) · read-write · deprecated The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less than agentSwitchIGMPSnoopingIntfGroupMembershipInterval. | |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingVlanFastLeaveAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.8.6.1.4 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This enables or disables IGMP Snooping on the selected vlan.
| |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingVlanMRPExpirationTime | 1.3.6.1.4.1.1332.1.1.5.3.8.6.1.5 | Integer32 (0..3600) | RW | deprecated | |||||||||||||||||
column · Integer32 (0..3600) · read-write · deprecated The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers attached. This parameter is configurable only for exisiting Vlans. | |||||||||||||||||||||
| CmsanSwitchIGMPSnoopingVlanAdminState | 1.3.6.1.4.1.1332.1.1.5.3.8.6.1.6 | INTEGER | RW | disableAndDiscard(0) | |||||||||||||||||
column · INTEGER · read-write · current IGMP Snooping state on a selected Vlan interface. This parameter is ignored if global msanIgmpSnoopingAdminState value is disableAndDiscard(0) or disableAndBroadcast(1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanSwitchIGMPProxyVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.8.7 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IGMP Proxy Vlan configuration entries. | |||||||||||||||||||||
| RmsanSwitchIGMPProxyVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.8.7.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CmsanSwitchIGMPProxyVlanIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.8.7.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current IGMP Proxy IP address. If set to 0.0.0.0, default IP address is used (IP address of MN interface -> msanNetworkIPAddress). | |||||||||||||||||||||
| CmsanSwitchIGMPProxyVlanRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.8.7.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanIgmpStatistics | 1.3.6.1.4.1.1332.1.1.5.3.8.8 | ||||||||||||||||||||
| NmsanIgmpStatGlobal | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1 | ||||||||||||||||||||
| SmsanIgmpStatRxV1 | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.1 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP v1 packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxV2Join | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.2 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP v2 join packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxV2Leave | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.3 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP v2 leave packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxV3Report | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.4 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP v3 report packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxQuery | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.5 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP query packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxError | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.6 | Counter32 | RO | 231 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received corrupted or unknown IGMP packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxBlockByIgmpFilter | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.7 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP packets blocked by IGMP filter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxBlockByMcastAcl | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.8 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP packets blocked by Multicast ACL. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxBlockByMcastCac | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.9 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP packets blocked by Multicast CAC. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIgmpStatRxBlockByIgmpVersion | 1.3.6.1.4.1.1332.1.1.5.3.8.8.1.10 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of received IGMP packets blocked by IGMP Version Control. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanIgmpPortStatTable | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIgmpPortStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1 | NA | |||||||||||||||||||
| CmsanIgmpPortStatRxV1 | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.1 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP v1 packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatTxV1 | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.2 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of transmitted IGMP v1 packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxV2Join | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.3 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP v2 join packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatTxV2Join | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.4 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of transmitted IGMP v2 join packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxV2Leave | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.5 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP v2 leave packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatTxV2Leave | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.6 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of transmitted IGMP v2 leave packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxV3Report | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.7 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP v3 report packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatTxV3Report | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.8 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of transmitted IGMP v3 report packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxQuery | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.9 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP query packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxError | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.10 | Counter32 | RO | 37 | |||||||||||||||||
column · Counter32 · read-only · current Number of received corrupted or unknown IGMP packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxBlockByIgmpFilter | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.11 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP packets blocked by IGMP filter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxBlockByMcastAcl | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.12 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP packets blocked by Multicast ACL. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxBlockByMcastCac | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.13 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP packets blocked by Multicast CAC. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatTxQuery | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.14 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of transmitted IGMP query packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIgmpPortStatRxBlockByIgmpVersion | 1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.15 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of received IGMP packets blocked by IGMP Version. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanPort | 1.3.6.1.4.1.1332.1.1.5.3.10 | ||||||||||||||||||||
| NmsanPortGlobal | 1.3.6.1.4.1.1332.1.1.5.3.10.1 | ||||||||||||||||||||
| TmsanPortTable | 1.3.6.1.4.1.1332.1.1.5.3.10.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.10.2.1 | NA | |||||||||||||||||||
| CmsanPortMNFlag | 1.3.6.1.4.1.1332.1.1.5.3.10.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object determines whether to allow or not allow management access to a specific link. The factory default is enabled.
| |||||||||||||||||||||
| CmsanPortMasterSlave | 1.3.6.1.4.1.1332.1.1.5.3.10.2.1.6 | INTEGER | RW | none(1) | |||||||||||||||||
column · INTEGER · read-write · current This object determines whether Gb port should be master or slave. Set to none when auto-negotiation and for non-Gb ports.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortNegCapAdvertisedBits | 1.3.6.1.4.1.1332.1.1.5.3.10.2.1.7 | Bits | RW | 00:01 | |||||||||||||||||
column · Bits · read-write · current A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for capabilities that are listed above. Only b1000baseXFD(13) and b1000baseTFD(15) are currently supported.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortSpeedDuplex | 1.3.6.1.4.1.1332.1.1.5.3.10.2.1.8 | INTEGER | RW | speed1000MbpsFD(30) | |||||||||||||||||
column · INTEGER · read-write · current Speed and duplex mode of the interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortStpP2PAutoState | 1.3.6.1.4.1.1332.1.1.5.3.10.2.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The field extends ISKRATEL-MSAN-BASICCONF-MIB.agentStpCstPortOperPointToPoint by the <auto> value.
| |||||||||||||||||||||
| CmsanPortUsageType | 1.3.6.1.4.1.1332.1.1.5.3.10.2.1.21 | INTEGER | RW | uplink(1) | |||||||||||||||||
column · INTEGER · read-write · current This object specifies the type of an interface whether it is an uplink or access port. If you change this value you must save configuration and restart network element.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanPppoeIA | 1.3.6.1.4.1.1332.1.1.5.3.11 | ||||||||||||||||||||
| NmsanPppoeIAGlobal | 1.3.6.1.4.1.1332.1.1.5.3.11.1 | ||||||||||||||||||||
| SmsanPppoeIAStatus | 1.3.6.1.4.1.1332.1.1.5.3.11.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies if the PPPOE Intermadiate Agent Service is to be Enabled or Disabled.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIAVsaReplyMode | 1.3.6.1.4.1.1332.1.1.5.3.11.1.2 | INTEGER | RW | remove(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies PPPOE Intermadiate Agent keep/remove option 82 in replies.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIACircuitIdStatus | 1.3.6.1.4.1.1332.1.1.5.3.11.1.3 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies the disable/enable inserting Circuit ID suboption.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIARemoteIdStatus | 1.3.6.1.4.1.1332.1.1.5.3.11.1.4 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Specifies the disable/enable inserting Remote ID suboption.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIACircuitIdInnerVlan | 1.3.6.1.4.1.1332.1.1.5.3.11.1.5 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Include Inner VLAN (C-VLAN) in Circuit Id when port is in DVLAN Tunneling mode (msanPortDVlanTagMode = enable).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIACircuitIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.11.1.6 | DisplayString | RW | | |||||||||||||||||
scalar · DisplayString · read-write · current PPPoE Circuit Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEXExample values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIARemoteIdCustomFormat | 1.3.6.1.4.1.1332.1.1.5.3.11.1.7 | DisplayString | RW | $PORT_REM_ID | |||||||||||||||||
scalar · DisplayString · read-write · current PPPoE Remote Id Custom format definition composed of arbitrary characters and variable macros.
Use '$[h][[0|s]<len>][d[<delim>]]<macro>' format to specify:
h HEX variable format
0|s left padding with zeroes or spaces
<len> - maximum variable length
d use custom delimiter for MAC/IP
<delim> - delimiting character
<macro> variable macro
Supported macros:
$SHELF - A string variable representing the shelf name as configured
or acquired by this device.
$CHASSIS - A numeric variable ranging [0..99] and representing numerical
identification of shelf.
$PANEL - Panel indicator: 0 front panel, 1 back panel.
$INTF_TYPE - Interface type: eth, dsl, gpon, mng, lag, atm, etc.
$AGENT_BOARD - Local board position (slot number) of DHCP Relay Agent.
$PORT - ID of local port the DHCP packet is received on.
$PORT_REM_ID - Complete remoteID string is inserted, as configured per
pertaining interface.
$INTF - ID of local interface the DHCP packet is received on in form
as used in interface configuration (e.g.: 1/2/1).
$INTF_DSCR - Interface description string taken exactly as configured
using 'description' command.
$PVC_INTF - ID of PVC interface the DHCP packet is received from (ADSL only).
$VPI - ID of ATM VPI the DHCP packet is received in (ADSL only).
$VCI - ID of ATM VCI the DHCP packet is received in (ADSL only).
$CLNT_MAC - MAC address of DHCP client sending the packet.
$AGENT_MAC - Local DHCP Relay Agent MAC address. If this is a switching device
MNG address is used. If this is a routing device MAC address
of the receiving interface is used.
$AGENT_IPV4 - Local DHCP Relay Agent IP address. Management IPv4 address
is used if this is a switching device, or IPv4 address of
receiving interface is used if this is a routing device.
$VLAN - Outermost VLAN ID in which the DHCP packet has been received.
In case of single tagged frame this is VLAN ID of the frame.
In case of double (QinQ) tagged frame, this is service
provider VLAN ID.
$VLAN_NAME - The VLAN name, as it has been configured by user,
of outermost VLAN in which the DHCP packet is received.
$CVID - Valid only for double (QinQ) tagged frames. Customer (inner)
VLAN ID in which the DHCP packet has been received.
$SYSNAME - System name as configured in SNMP agent on this device.
$LOCATION - Location as configured in SNMP agent on this device.
$CONTACT - Contact as configured in SNMP agent on this device.
$HEX - Arbitrary array of hexadecimal values.
Format: $<arbitrary hex values>HEXExample values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanPppoeIAPortTable | 1.3.6.1.4.1.1332.1.1.5.3.11.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPppoeIAPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.11.2.1 | NA | |||||||||||||||||||
| CmsanPppoeIAPortStatus | 1.3.6.1.4.1.1332.1.1.5.3.11.2.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current State of PPPoE Intermadiate Agent on the port
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIAPortRemoteId | 1.3.6.1.4.1.1332.1.1.5.3.11.2.1.2 | OCTET STRING | RW | | |||||||||||||||||
column · OCTET STRING · read-write · current Remote Id for the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIAPortCircuitType | 1.3.6.1.4.1.1332.1.1.5.3.11.2.1.3 | INTEGER | RW | untrusted(2) | |||||||||||||||||
column · INTEGER · read-write · current PPPoE IA Circuit type per port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIAPortCircuitIdType | 1.3.6.1.4.1.1332.1.1.5.3.11.2.1.4 | INTEGER | RW | iskratel(1) | |||||||||||||||||
column · INTEGER · read-write · current Circuit Id syntax mode per port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanPppoeIaStatistics | 1.3.6.1.4.1.1332.1.1.5.3.11.3 | ||||||||||||||||||||
| SmsanPppoeIaStatPADI | 1.3.6.1.4.1.1332.1.1.5.3.11.3.1 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of PADI packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIaStatPADR | 1.3.6.1.4.1.1332.1.1.5.3.11.3.2 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of PADR packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIaStatPADO | 1.3.6.1.4.1.1332.1.1.5.3.11.3.3 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of PADO packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIaStatPADS | 1.3.6.1.4.1.1332.1.1.5.3.11.3.4 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of PADS packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIaStatPADT | 1.3.6.1.4.1.1332.1.1.5.3.11.3.5 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of PADT packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIaStatUnsutableFrames | 1.3.6.1.4.1.1332.1.1.5.3.11.3.6 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of packets with unsutable frame. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIaStatUnknownFrames | 1.3.6.1.4.1.1332.1.1.5.3.11.3.7 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of packets with unknown frame. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPppoeIaStatInvalidFrames | 1.3.6.1.4.1.1332.1.1.5.3.11.3.8 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of packets with invalid frame. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanPppoeIaPortStatisticsTable | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPppoeIaPortStatisticsEntry | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1 | NA | |||||||||||||||||||
| CmsanPppoeIaPortStatPADI | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.1 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of PADI packets on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIaPortStatPADR | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.2 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of PADR packets on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIaPortStatPADO | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.3 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of PADO packets on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIaPortStatPADS | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.4 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of PADS packets on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIaPortStatPADT | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.5 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of PADT packets on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIaPortStatUnsutableFrames | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.6 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of packets with unsutable frame on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIaPortStatUnknownFrames | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.7 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of packets with unknown frame on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPppoeIaPortStatInvalidFrames | 1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.8 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of packets with invalid frame on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanPppoeIaVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.11.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPppoeIaVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.11.4.1 | NA | |||||||||||||||||||
| CmsanPppoeIaVlanStatus | 1.3.6.1.4.1.1332.1.1.5.3.11.4.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current State of PPPoE Intermadiate Agent per VLAN.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanQoS | 1.3.6.1.4.1.1332.1.1.5.3.12 | ||||||||||||||||||||
| NmsanQosGlobal | 1.3.6.1.4.1.1332.1.1.5.3.12.1 | ||||||||||||||||||||
| TmsanIpAclRuleTable | 1.3.6.1.4.1.1332.1.1.5.3.12.2 | NA | |||||||||||||||||||
table · not-accessible · current This table extends aclTable/aclRuleTable. | |||||||||||||||||||||
| RmsanIpAclRuleEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1 | NA | |||||||||||||||||||
row · not-accessible · current This table extends aclTable/aclRuleTable. | |||||||||||||||||||||
| CmsanIpAclIndex | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.1 | Integer32 (1..199) | NA | ||||||||||||||||||
column · Integer32 (1..199) · not-accessible · current This is aclIndex in aclTable | |||||||||||||||||||||
| CmsanIpAclRuleIndex | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.2 | Integer32 (1..9) | NA | ||||||||||||||||||
column · Integer32 (1..9) · not-accessible · current The index of the IP ACL rule (aclRuleIndex in aclRuleTable). | |||||||||||||||||||||
| CmsanIpAclRuleAssignVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.3 | Integer32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Integer32 (0..4095) · read-write · obsolete Assign VLAN Id. | |||||||||||||||||||||
| CmsanIpAclRuleAssignCoSPriority | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.4 | Integer32 | RW | obsolete | |||||||||||||||||
column · Integer32 · read-write · obsolete Assign CoS priority | |||||||||||||||||||||
| CmsanIpAclRuleEgressIntf | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.5 | Integer32 | RW | obsolete | |||||||||||||||||
column · Integer32 · read-write · obsolete Egress interface ID (ifIndex/ifTable). | |||||||||||||||||||||
| CmsanIpAclRuleAssignVlanId2 | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.6 | Integer32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Integer32 (0..4095) · read-write · obsolete Assign Secondary VLAN ID -> add (if not exists) or change. | |||||||||||||||||||||
| CmsanIpAclRuleRemoveVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.7 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete Remove VLAN Id (outer).
| |||||||||||||||||||||
| CmsanIpAclRuleIcmpType | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.8 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete ICMP message type used in the MAC ACL Classification. This parameter is used if aclRuleProtocol is set to icmp(1).
| |||||||||||||||||||||
| CmsanIpAclRuleDestMacAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.9 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current The Destination MAC address used in the Advanced IP ACL Classification. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleDestMacMask | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.10 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current The Destination MAC address mask used in the Advanced IP Classification. This mask value identifies the portion of the msanIpAclRuleDestMacAddr that is compared against a packet. A non-contiguous mask value is permitted. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleSrcMacAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.11 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current The Source MAC address used in the Advanced IP ACL Classification. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleSrcMacMask | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.12 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current The Source MAC address mask used in the Advanced IP Classification. This mask value identifies the portion of the msanIpAclRuleSrcMacAddr that is compared against a packet. A non-contiguous mask value is permitted. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleCos | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.13 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current The Class of Service (COS) used in the Advanced IP Classification. This is the three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame. For frames containing a double VLAN tag, this field is located in the first/outer tag. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleCos2 | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.14 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current The Secondary Class of Service (COS) used in the Advanced IP Classification. This is the three-bit user priority field in the second 802.1Q tag header of a tagged Ethernet frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.15 | Unsigned32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Unsigned32 (0..4095) · read-write · obsolete The VLAN ID value used in the Advanced IP Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleVlanId2 | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.16 | Unsigned32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Unsigned32 (0..4095) · read-write · obsolete The Secondary VLAN ID value used in the Advanced IP Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the second 802.1Q tag header of a tagged Ethernet frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleCVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.17 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current The C-customer VLAN ID value used in the Advanced IP Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the second 802.1Q tag header of a tagged Ethernet frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleSVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.18 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current The S-service VLAN ID value used in the Advanced IP Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleAssignCVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.19 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current Assign C VLAN ID -> add (if not exists) or change. Used in the Advanced IP Classification. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleAssignSVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.20 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current Assign S VLAN ID -> add (if not exists) or change. Used in the Advanced IP Classification. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleRemoveSVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.21 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Remove S-service VLAN ID. Used in the Advanced IP Classification. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299
| |||||||||||||||||||||
| CmsanIpAclRuleVlanIdRangeStart | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.22 | Unsigned32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Unsigned32 (0..4095) · read-write · obsolete The VLAN ID range start value used in the Advanced IP Classification. Setting this value greater than the current msanIpAclRuleVlanIdRangeEnd changes the VLAN ID range end to the same value as the range start. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleVlanIdRangeEnd | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.23 | Unsigned32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Unsigned32 (0..4095) · read-write · obsolete The VLAN ID range end value used in the Advanced IP Classification. Setting this value less than the current msanIpAclRuleVlanIdRangeStart changes the VLAN ID range start to the same value as the range end. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleVlanId2RangeStart | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.24 | Unsigned32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Unsigned32 (0..4095) · read-write · obsolete The Secondary VLAN ID range start value used in the Advanced IP Classification. Setting this value greater than the current msanIpAclRuleVlanId2RangeEnd changes the VLAN ID range end to the same value as the range start. The VLAN ID field is defined as the 12-bit VLAN identifier in the second 802.1Q tag header of a tagged Ethernet frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleVlanId2RangeEnd | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.25 | Unsigned32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Unsigned32 (0..4095) · read-write · obsolete The Secondary VLAN ID range end value used in the Advanced IP Classification. Setting this value less than the current msanIpAclRuleVlanId2RangeStart changes the VLAN ID range start to the same value as the range end. The VLAN ID field is defined as the 12-bit VLAN identifier in the second 802.1Q tag header of a tagged Ethernet frame. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleSVlanIdRangeStart | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.26 | Unsigned32 (0..4095) | RW | ||||||||||||||||||
column · Unsigned32 (0..4095) · read-write · current The S-service VLAN ID range start value used in the Advanced IP Classification. Setting this value greater than the current msanIpAclRuleSVlanIdRangeEnd changes the VLAN ID range end to the same value as the range start. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleSVlanIdRangeEnd | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.27 | Unsigned32 (0..4095) | RW | ||||||||||||||||||
column · Unsigned32 (0..4095) · read-write · current The S-service VLAN ID range end value used in the Advanced IP Classification. Setting this value less than the current msanIpAclRuleSVlanIdRangeStart changes the VLAN ID range start to the same value as the range end. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleCVlanIdRangeStart | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.28 | Unsigned32 (0..4095) | RW | ||||||||||||||||||
column · Unsigned32 (0..4095) · read-write · current The C-customer VLAN ID range start value used in the Advanced IP Classification. Setting this value greater than the current msanIpAclRuleCVlanIdRangeEnd changes the VLAN ID range end to the same value as the range start. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleCVlanIdRangeEnd | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.29 | Unsigned32 (0..4095) | RW | ||||||||||||||||||
column · Unsigned32 (0..4095) · read-write · current The C-customer VLAN ID range end value used in the Advanced IP Classification. Setting this value less than the current msanIpAclRuleCVlanIdRangeStart changes the VLAN ID range start to the same value as the range end. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleSrcIpv6Address | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.31 | InetAddressIPv6 | RW | ||||||||||||||||||
column · InetAddressIPv6 · read-write · current The Source IPv6 Address used in the ACL Classification. | |||||||||||||||||||||
| CmsanIpAclRuleSrcIpv6AddressMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.32 | Integer32 (0..128) | RW | ||||||||||||||||||
column · Integer32 (0..128) · read-write · current The length of the prefix (in bits) associated with the IPv6 source address of this entry (msanIpAclRuleSrcIpv6Address). Value 0 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIpAclRuleDestIpv6Address | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.33 | InetAddressIPv6 | RW | ||||||||||||||||||
column · InetAddressIPv6 · read-write · current The Destination IPv6 Address used in the ACL Classification. | |||||||||||||||||||||
| CmsanIpAclRuleDestIpv6AddressMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.34 | Integer32 (0..128) | RW | ||||||||||||||||||
column · Integer32 (0..128) · read-write · current The length of the prefix (in bits) associated with the IPv6 destination address of this entry (msanIpAclRuleDestIpv6Address). Value 0 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIpAclRuleAssignCPcp | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.35 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current Assign Customer PCP (Priority Code Point) - PCP is also known as Class of Service (CoS) bits. A value of -1 indicates that parameter has not been defined. This parameter can be used only if msanIpAclRuleAssignCVlanId is already set. Used in the Advanced IP Classification. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| CmsanIpAclRuleAssignSPcp | 1.3.6.1.4.1.1332.1.1.5.3.12.2.1.36 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current Assign Service PCP (Priority Code Point). PCP is also known as Class of Service (CoS) bits. A value of -1 indicates that parameter has not been defined. This parameter can be used only if msanIpAclRuleAssignSVlanId is already set. Used in the Advanced IP Classification. Advanced IP ACL: msanIpAclIndex value in range 200 ... 299 | |||||||||||||||||||||
| TmsanMacAclRuleTable | 1.3.6.1.4.1.1332.1.1.5.3.12.3 | NA | |||||||||||||||||||
table · not-accessible · current This table extends aclMacTable/aclMacRuleTable. | |||||||||||||||||||||
| RmsanMacAclRuleEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1 | NA | |||||||||||||||||||
row · not-accessible · current This table extends aclMacTable/aclMacRuleTable. | |||||||||||||||||||||
| CmsanMacAclIndex | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.1 | Integer32 (1..1000) | NA | ||||||||||||||||||
column · Integer32 (1..1000) · not-accessible · current This is aclMacIndex in aclMacTable | |||||||||||||||||||||
| CmsanMacAclRuleIndex | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.2 | Integer32 (1..1000) | NA | ||||||||||||||||||
column · Integer32 (1..1000) · not-accessible · current The index of the MAC ACL rule (aclMACRuleIndex in aclMACRuleTable). | |||||||||||||||||||||
| CmsanMacAclRuleEgressIntf | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.3 | Integer32 | RW | obsolete | |||||||||||||||||
column · Integer32 · read-write · obsolete Egress Interface ID (ifIndex/ifTable). | |||||||||||||||||||||
| CmsanMacAclRuleAssignVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.4 | Integer32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Integer32 (0..4095) · read-write · obsolete Assign VLAN Id. | |||||||||||||||||||||
| CmsanMacAclRuleAssignCoSPriority | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.5 | Integer32 | RW | obsolete | |||||||||||||||||
column · Integer32 · read-write · obsolete Assign CoS priority | |||||||||||||||||||||
| CmsanMacAclRuleAssignVlanId2 | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.6 | Integer32 (0..4095) | RW | obsolete | |||||||||||||||||
column · Integer32 (0..4095) · read-write · obsolete Assign Secondary VLAN ID -> add (if not exists) or change. | |||||||||||||||||||||
| CmsanMacAclRuleRemoveVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.7 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete Remove outer VLAN Id (outer).
| |||||||||||||||||||||
| CmsanMacAclRuleCVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.8 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current C-customer Vlan ID | |||||||||||||||||||||
| CmsanMacAclRuleSVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.9 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current S-service Vlan ID | |||||||||||||||||||||
| CmsanMacAclRuleAssignCVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.10 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current Assign C-customer VLAN ID -> add (if not exists) or change. | |||||||||||||||||||||
| CmsanMacAclRuleAssignSVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.11 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current Assign S-service VLAN ID -> add (if not exists) or change. | |||||||||||||||||||||
| CmsanMacAclRuleRemoveSVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Remove S-service VLAN ID.
| |||||||||||||||||||||
| CmsanMacAclRuleSVlanIdRangeStart | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.13 | Unsigned32 (0..4095) | RW | ||||||||||||||||||
column · Unsigned32 (0..4095) · read-write · current The S-service VLAN ID range start value. Setting this value greater than the current msanMacAclRuleSVlanIdRangeEnd changes the VLAN ID range end to the same value as the range start. | |||||||||||||||||||||
| CmsanMacAclRuleSVlanIdRangeEnd | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.14 | Unsigned32 (0..4095) | RW | ||||||||||||||||||
column · Unsigned32 (0..4095) · read-write · current The S-service VLAN ID range end value. Setting this value less than the current msanMacAclRuleSVlanIdRangeStart changes the VLAN ID range start to the same value as the range end. | |||||||||||||||||||||
| CmsanMacAclRuleCVlanIdRangeStart | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.15 | Unsigned32 (0..4095) | RW | ||||||||||||||||||
column · Unsigned32 (0..4095) · read-write · current The C-customer VLAN ID range start value. Setting this value greater than the current msanMacAclRuleCVlanIdRangeEnd changes the VLAN ID range end to the same value as the range start. | |||||||||||||||||||||
| CmsanMacAclRuleCVlanIdRangeEnd | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.16 | Unsigned32 (0..4095) | RW | ||||||||||||||||||
column · Unsigned32 (0..4095) · read-write · current The C-customer VLAN ID range end value. Setting this value less than the current msanMacAclRuleCVlanIdRangeStart changes the VLAN ID range start to the same value as the range end. | |||||||||||||||||||||
| CmsanMacAclRuleAssignCPcp | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.17 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current Assign Customer PCP (Priority Code Point) - PCP is also known as Class of Service (CoS) bits. A value of -1 indicates that parameter has not been defined. This parameter can be used only if msanMacAclRuleAssignCVlanId is already set. | |||||||||||||||||||||
| CmsanMacAclRuleAssignSPcp | 1.3.6.1.4.1.1332.1.1.5.3.12.3.1.18 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current Assign Service PCP (Priority Code Point) - PCP is also known as Class of Service (CoS) bits. A value of -1 indicates that parameter has not been defined. This parameter can be used only if msanMacAclRuleAssignSVlanId is already set. | |||||||||||||||||||||
| TmsanCosQueueControlTable | 1.3.6.1.4.1.1332.1.1.5.3.12.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanCosQueueControlEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.4.1 | NA | |||||||||||||||||||
| CmsanCosQueueControlIntfBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.12.4.1.1 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current Specifies the maximum number of uncommitted bytes that the switch will try to send into the network. It is the number of bytes that are sent at a rate, higher than committed and that the next device in the network must be able to buffer without notifying a congestion. Default value is 0. Valid values are 16, 20, 28, 40, 76, 140, 268 and 524 kilobytes. Configuring shaping rate without burst size will take the maximum possible value of burst, which is 524 KB.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanCosQueueIntfShapingRate | 1.3.6.1.4.1.1332.1.1.5.3.12.4.1.2 | Unsigned32 (0..10000000) | RW | 0 | |||||||||||||||||
column · Unsigned32 (0..10000000) · read-write · current Specifies the maximum bandwidth allowed, typically used to shape the outbound transmission rate. This value is controlled independently of any per-queue maximum bandwidth configuration. It is effectively a second-level shaping mechanism. Default value is 0. Valid Range is 0 to 10000000 kbps. The value 0 means maximum is unlimited.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanCosQueueTable | 1.3.6.1.4.1.1332.1.1.5.3.12.5 | NA | |||||||||||||||||||
table · not-accessible · current Table of class-of-service queue configuration parameters for the specified interface. This is extension of the table agentCosQueueTable. | |||||||||||||||||||||
| RmsanCosQueueEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry describes a single class-of-service (COS) queue for a given Interface Index. The number of configurable COS queues for an interface vary based on device capabilities. All objects defined for this table entry contain a default value corresponding to a typical, non-preferential treatment of packets traversing the interface's COS queues.
| |||||||||||||||||||||
| CmsanCosQueueIndex | 1.3.6.1.4.1.1332.1.1.5.3.12.5.1.1 | Integer32 (0..1000) | NA | ||||||||||||||||||
column · Integer32 (0..1000) · not-accessible · current The COS queue index, numbered 0 to (n-1), where n is the total number of configurable interface queues for the device as indicated by agentCosQueueNumQueuesPerPort. In general, a higher numbered queue index is used to support higher priority traffic, although actual operation may be altered via configuration through this table. | |||||||||||||||||||||
| CmsanCosQueueWeight | 1.3.6.1.4.1.1332.1.1.5.3.12.5.1.2 | INTEGER (0..32) | RW | ||||||||||||||||||
column · INTEGER (0..32) · read-write · current Weight of the queue being used in egress scheduling algorithm. | |||||||||||||||||||||
| CmsanCosQueueLength | 1.3.6.1.4.1.1332.1.1.5.3.12.5.1.3 | INTEGER (2..156) | RW | ||||||||||||||||||
column · INTEGER (2..156) · read-write · current Length of the queue in kB. | |||||||||||||||||||||
| TmsanCosMapIntfTrustTable | 1.3.6.1.4.1.1332.1.1.5.3.12.6 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanCosMapIntfTrustEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.6.1 | NA | |||||||||||||||||||
| CmsanCosMapIntfTrustMode | 1.3.6.1.4.1.1332.1.1.5.3.12.6.1.1 | INTEGER | RW | untrusted(1) | |||||||||||||||||
column · INTEGER · read-write · current This is copy of LVL7 parameter agentCosMapIntfTrustMode, except that index 0 is not supported. The class of service trust mode of an interface. When set to a trusted mode, the appropriate COS mapping table is used as follows: trustDot1p(2) : dot1dTrafficClassTable trustIpPrecedence(3): agentCosMapIpPrecTable trustIpDscp(4): agentCosMapIpDscpTable For an untrusted(1) interface, packets are handled in accordance with the dot1dPortDefaultUserPriority value of the ingress port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanQosProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.12.7 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanQosProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1 | NA | |||||||||||||||||||
| CmsanQosProfileName | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current QoS profile name. | |||||||||||||||||||||
| CmsanQosProfileMatchInAny | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Match every incoming packet frame.
| |||||||||||||||||||||
| CmsanQosProfileMatchInMacDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.3 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Match incoming packet frame with specified destination MAC address. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInMacDestMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.4 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanQosProfileMatchInMacDestAddr that is compared with input packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInMacSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.5 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Match incoming packet frame with specified source MAC address. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInMacSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.6 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanQosProfileMatchInMacSrcAddr that is compared with input packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInCos | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.7 | Integer32 (-1..7) | RW | ||||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match incoming packet frame with specified CoS value (0-7). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInCos2 | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.8 | Integer32 (-1..7) | RW | ||||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match incoming packet frame with specified secondary (C-TAG) CoS value (0-7). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.9 | Integer32 (-1..4094) | RW | ||||||||||||||||||
column · Integer32 (-1..4094) · read-write · current Match incoming packet frame with specified VLAN ID value (1-4094). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInVlanId2 | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.10 | Integer32 (-1..4094) | RW | ||||||||||||||||||
column · Integer32 (-1..4094) · read-write · current Match incoming packet frame with specified secondary (C-TAG) VLAN ID value (1-4094). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInEthertype | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.11 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match incoming packet frame with specified EtherType value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInIpProtocol | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.12 | Integer32 (-1..255) | RW | ||||||||||||||||||
column · Integer32 (-1..255) · read-write · current Match incoming packet frame with specified IP protocol value. A value of -1 indicates that parameter has not been defined. Some of standard protocol values: icmp - 1 igmp - 2 ip - 4 (ip in ip encapsulation) tcp - 6 udp - 17 | |||||||||||||||||||||
| CmsanQosProfileMatchInIpSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.13 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Match incoming packet frame with specified source IP address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInIpSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanQosProfileMatchInIpSrcAddr that is compared with input packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInIpDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.15 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Match incoming packet frame with specified destination IP address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInIpDestMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.16 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanQosProfileMatchInIpDestAddr that is compared with input packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchInIpDscp | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.17 | Integer32 (-1..63) | RW | ||||||||||||||||||
column · Integer32 (-1..63) · read-write · current Match incoming packet frame with specified IP DSCP value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInIpPrecedence | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.18 | Integer32 (-1..7) | RW | ||||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match incoming packet frame with specified IP precedence (part of TOS field) value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInIpTosBits | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.19 | OCTET STRING (SIZE (0..1)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1)) · read-write · current Match incoming packet frame with specified IP TOS bits value. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInIpTosMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.20 | OCTET STRING (SIZE (0..1)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1)) · read-write · current This mask value identifies the portion of msanQosProfileMatchInIpTosBits that is compared against a packet. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInL4SrcPort | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.21 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match incoming packet frame with specified source TCP/UDP port number. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInL4DestPort | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.22 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match incoming packet frame with specified destination TCP/UDP port number in downstream direction. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutAny | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.23 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Match every outgoing packet frame in upstream direction.
| |||||||||||||||||||||
| CmsanQosProfileMatchOutMacDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.24 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Match outgoing packet frame with specified destination MAC address. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutMacDestMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.25 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanQosProfileMatchOutMacDestAddr that is compared with output packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutMacSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.26 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Match outgoing packet frame with specified source MAC address. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutMacSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.27 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanQosProfileMatchOutMacSrcAddr that is compared with output packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutCos | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.28 | Integer32 (-1..7) | RW | ||||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match outgoing packet frame with specified CoS value (0-7). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutCos2 | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.29 | Integer32 (-1..7) | RW | ||||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match outgoing packet frame with specified secondary (C-TAG) CoS value (0-7). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutVlanId | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.30 | Integer32 (-1..4094) | RW | ||||||||||||||||||
column · Integer32 (-1..4094) · read-write · current Match outgoing packet frame with specified VLAN ID value (1-4094). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutVlanId2 | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.31 | Integer32 (-1..4094) | RW | ||||||||||||||||||
column · Integer32 (-1..4094) · read-write · current Match outgoing packet frame with specified secondary (C-TAG) VLAN ID value (1-4094). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutEthertype | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.32 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match outgoing packet frame with specified EtherType value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpProtocol | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.33 | Integer32 (-1..255) | RW | ||||||||||||||||||
column · Integer32 (-1..255) · read-write · current Match outgoing packet frame with specified IP protocol value in upstream direction. A value of -1 indicates that parameter has not been defined. Some of standard protocol values: icmp - 1 igmp - 2 ip - 4 (ip in ip encapsulation) tcp - 6 udp - 17 | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.34 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Match outgoing packet frame with specified source IP address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.35 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanQosProfileMatchOutIpSrcAddr that is compared with output packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpDestAddr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.36 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Match outgoing packet frame with specified destination IP address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpDestMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.37 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanQosProfileMatchOutIpDestAddr that is compared with output packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpDscp | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.38 | Integer32 (-1..63) | RW | ||||||||||||||||||
column · Integer32 (-1..63) · read-write · current Match outgoing packet frame with specified IP DSCP value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpPrecedence | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.39 | Integer32 (-1..7) | RW | ||||||||||||||||||
column · Integer32 (-1..7) · read-write · current Match outgoing packet frame with specified IP precedence (part of TOS field) value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpTosBits | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.40 | OCTET STRING (SIZE (0..1)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1)) · read-write · current Match outgoing packet frame with specified IP TOS bits value. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutIpTosMask | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.41 | OCTET STRING (SIZE (0..1)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1)) · read-write · current This mask value identifies the portion of msanQosProfileMatchOutIpTosBits that is compared with output packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileMatchOutL4SrcPort | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.42 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match outgoing packet frame with specified source TCP/UDP port number in upstream direction. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutL4DestPort | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.43 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match outgoing packet frame with specified destination TCP/UDP port number. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileInCdr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.44 | Integer32 (-1..1000000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000000) · read-write · current Incoming committed data rate (E-CDR) in kbps (0 1000000). A value of -1 indicates that parameter has not been defined.
| |||||||||||||||||||||
| CmsanQosProfileInPdr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.45 | Integer32 (-1..1000000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000000) · read-write · current Incoming peak data rate (E-PDR) in kbps (0 1000000). A value of -1 indicates that parameter has not been defined.
| |||||||||||||||||||||
| CmsanQosProfileOutCdr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.46 | Integer32 (-1..1000000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000000) · read-write · current Outgoing committed data rate (E-CDR) in kbps (0 1000000). A value of -1 indicates that parameter has not been defined.
| |||||||||||||||||||||
| CmsanQosProfileOutPdr | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.47 | Integer32 (-1..1000000) | RW | ||||||||||||||||||
column · Integer32 (-1..1000000) · read-write · current Outgoing peak data rate (E-PDR) in kbps (0 1000000). A value of -1 indicates that parameter has not been defined.
| |||||||||||||||||||||
| CmsanQosProfileInTrustMode | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.48 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Trust mode for incoming packets which correspond to this profile. Default value is untrusted(1). Value untrustMarkCos(4) can be set if parameter msanQosProfileInMarkCos value is grater than -1. Value untrustMarkCos(5) can be set if parameter msanQosProfileInMarkDscp value is grater than -1.
| |||||||||||||||||||||
| CmsanQosProfileInMarkCos | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.49 | INTEGER (-1..7) | RW | ||||||||||||||||||
column · INTEGER (-1..7) · read-write · current Mark incoming packets with specified CoS value (0-7). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanQosProfileInMarkDscp | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.50 | INTEGER (-1..63) | RW | ||||||||||||||||||
column · INTEGER (-1..63) · read-write · current Mark incoming packets with specified IP DSCP value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.51 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). Value active(1) will activate and value destroy(6) will remove this entry. Other values are currently not supported. | |||||||||||||||||||||
| CmsanQosProfilePriority | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.52 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Priority of QoS profile. On interface can be linked only one QoS profile with high(2) prority (msanQoSIntProfileTable)
| |||||||||||||||||||||
| CmsanQosProfileInCdrBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.53 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Incoming committed data rate burst size in kB (0 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileInCdr value.
| |||||||||||||||||||||
| CmsanQosProfileInPdrBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.54 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Incoming peak data rate burst size in kB (0 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileInPdr value.
| |||||||||||||||||||||
| CmsanQosProfileOutCdrBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.55 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Outgoing committed data rate burst size in kB (0 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileOutCdr value.
| |||||||||||||||||||||
| CmsanQosProfileOutPdrBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.56 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Outgoing peak data rate burst size in kB (0 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileOutCdr value.
| |||||||||||||||||||||
| CmsanQosProfileMatchInSrcIpv6Address | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.58 | InetAddressIPv6 | RW | ||||||||||||||||||
column · InetAddressIPv6 · read-write · current Match incoming packet frame with specified source IPv6 address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInSrcIpv6AddressMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.59 | Integer32 (0..128) | RW | ||||||||||||||||||
column · Integer32 (0..128) · read-write · current The length of the prefix (in bits) associated with the incoming IPv6 source address of this entry (msanQosProfileMatchInSrcIpv6Address). Value 0 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInDestIpv6Address | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.60 | InetAddressIPv6 | RW | ||||||||||||||||||
column · InetAddressIPv6 · read-write · current Match incoming packet frame with specified destination IPv6 address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchInDestIpv6AddressMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.61 | Integer32 (0..128) | RW | ||||||||||||||||||
column · Integer32 (0..128) · read-write · current The length of the prefix (in bits) associated with the incoming IPv6 destination address of this entry (msanQosProfileMatchInDestIpv6Address). Value 0 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutSrcIpv6Address | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.63 | InetAddressIPv6 | RW | ||||||||||||||||||
column · InetAddressIPv6 · read-write · current Match outgoing packet frame with specified source IPv6 address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutSrcIpv6AddressMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.64 | Integer32 (0..128) | RW | ||||||||||||||||||
column · Integer32 (0..128) · read-write · current The length of the prefix (in bits) associated with the outcoming IPv6 source address of this entry (msanQosProfileMatchOutSrcIpv6Address). Value 0 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutDestIpv6Address | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.65 | InetAddressIPv6 | RW | ||||||||||||||||||
column · InetAddressIPv6 · read-write · current Match outcoming packet frame with specified destination IPv6 address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosProfileMatchOutDestIpv6AddressMaskLen | 1.3.6.1.4.1.1332.1.1.5.3.12.7.1.66 | Integer32 (0..128) | RW | ||||||||||||||||||
column · Integer32 (0..128) · read-write · current The length of the prefix (in bits) associated with the outcoming IPv6 destination address of this entry (msanQosProfileMatchOutDestIpv6Address). Value 0 indicates that parameter has not been defined. | |||||||||||||||||||||
| TmsanQosIntfProfileTable | 1.3.6.1.4.1.1332.1.1.5.3.12.8 | NA | |||||||||||||||||||
table · not-accessible · current This table connects selected QoS profiles (msanQoSProfileName) to specified interfaces (ifIndex). | |||||||||||||||||||||
| RmsanQosIntfProfileEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.8.1 | NA | |||||||||||||||||||
| CmsanQosIntfProfileAtmVpi | 1.3.6.1.4.1.1332.1.1.5.3.12.8.1.1 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current ATM Virtual path identifier of the ADSL interface. Value -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosIntfProfileAtmVci | 1.3.6.1.4.1.1332.1.1.5.3.12.8.1.2 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current ATM Virtual channel identifier of the ADSL interface. Value -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanQosIntfProfileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.12.8.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deactivation use notInService(2). For row deletion use destroy(6). Other values are currently not supported. On interface can be linked only one QoS profile with high(2) prority (msanQosProfilePriority) | |||||||||||||||||||||
| NmsanQosStatistics | 1.3.6.1.4.1.1332.1.1.5.3.12.9 | ||||||||||||||||||||
| TmsanQosPortStatTable | 1.3.6.1.4.1.1332.1.1.5.3.12.9.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanQosPortStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.9.1.1 | NA | |||||||||||||||||||
| CmsanQosPortStatInDroppedFrames | 1.3.6.1.4.1.1332.1.1.5.3.12.9.1.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of dropped frames per port in incoming direction. | |||||||||||||||||||||
| CmsanQosPortStatOutDroppedFrames | 1.3.6.1.4.1.1332.1.1.5.3.12.9.1.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of dropped frames per port in outgoing direction. | |||||||||||||||||||||
| TmsanQosPortProfileStatTable | 1.3.6.1.4.1.1332.1.1.5.3.12.9.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanQosPortProfileStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.9.2.1 | NA | |||||||||||||||||||
| CmsanQosPortProfileStatQueueCurrent | 1.3.6.1.4.1.1332.1.1.5.3.12.9.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Current queue occupation per profile per port (in number of packets) . | |||||||||||||||||||||
| CmsanQosPortProfileStatQueueAverage | 1.3.6.1.4.1.1332.1.1.5.3.12.9.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Average queue occupation per profile per port (in number of packets) . | |||||||||||||||||||||
| CmsanQosPortProfileStatQueueMax | 1.3.6.1.4.1.1332.1.1.5.3.12.9.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Maximum queue occupation per profile per port (in number of packets) . | |||||||||||||||||||||
| TmsanIpAclTable | 1.3.6.1.4.1.1332.1.1.5.3.12.10 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIpAclEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.10.1 | NA | |||||||||||||||||||
| CmsanIpAclId | 1.3.6.1.4.1.1332.1.1.5.3.12.10.1.1 | Integer32 (1..199) | NA | ||||||||||||||||||
column · Integer32 (1..199) · not-accessible · current This is aclIndex in aclTable (1.3.6.1.4.1.1332.1.1.5.2.3.2.1) | |||||||||||||||||||||
| CmsanIpAclProtection | 1.3.6.1.4.1.1332.1.1.5.3.12.10.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanAclProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanIpAclStatus | 1.3.6.1.4.1.1332.1.1.5.3.12.10.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| TmsanMacAclTable | 1.3.6.1.4.1.1332.1.1.5.3.12.11 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMacAclEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.11.1 | NA | |||||||||||||||||||
| CmsanMacAclId | 1.3.6.1.4.1.1332.1.1.5.3.12.11.1.1 | Integer32 (1..199) | NA | ||||||||||||||||||
column · Integer32 (1..199) · not-accessible · current This is aclMacIndex in aclMacTable (1.3.6.1.4.1.1332.1.1.5.2.3.2.6) | |||||||||||||||||||||
| CmsanMacAclProtection | 1.3.6.1.4.1.1332.1.1.5.3.12.11.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanMacAclStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanMacAclStatus | 1.3.6.1.4.1.1332.1.1.5.3.12.11.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| TmsanQosPortTable | 1.3.6.1.4.1.1332.1.1.5.3.12.12 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanQosPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.12.12.1 | NA | |||||||||||||||||||
| CmsanQosPortIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.12.12.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of GPON ONU interface (from ifTable). ifIndex value of selected ONU interface (ifDescr=0/x/y) is calculated by formula: ifIndex=max_olt_port_number(8 or 16)+(x-1)*128+y | |||||||||||||||||||||
| CmsanQosPortDirection | 1.3.6.1.4.1.1332.1.1.5.3.12.12.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Data traffic direction which defines QoS action: downstream(1) -> shaping upstream(2) -> policing
| |||||||||||||||||||||
| CmsanQosPortPeakDataRate | 1.3.6.1.4.1.1332.1.1.5.3.12.12.1.3 | Integer32 (0 | 64..1000000) | RC | ||||||||||||||||||
column · Integer32 (0 | 64..1000000) · read-create · current Peak data rate in kbps (0 | 64 - 1000000). Value 0 (default) means -> no rate limit
| |||||||||||||||||||||
| CmsanQosPortPeakBurstSize | 1.3.6.1.4.1.1332.1.1.5.3.12.12.1.4 | Integer32 (0..16384) | RW | ||||||||||||||||||
column · Integer32 (0..16384) · read-write · current Peak data rate burst size in kB (0 - 16384). This parameter can be set only when peak data rate value (msanQosPortPeakDataRate) is not 0. When parameter is set to 0 (default), it's automatically updated to default burst size value according to current peak data rate (msanQosPortPeakDataRate).
| |||||||||||||||||||||
| CmsanQosPortPeakDroppedFrames | 1.3.6.1.4.1.1332.1.1.5.3.12.12.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Dropped frames counter (peak data rate is exceeded) | |||||||||||||||||||||
| NmsanForwardingDb | 1.3.6.1.4.1.1332.1.1.5.3.13 | ||||||||||||||||||||
| NmsanForwardingDbGlobal | 1.3.6.1.4.1.1332.1.1.5.3.13.3 | ||||||||||||||||||||
| SmsanAddressLearningMode | 1.3.6.1.4.1.1332.1.1.5.3.13.3.1 | INTEGER | RW | deprecated | |||||||||||||||||
scalar · INTEGER · read-write · deprecated Specifies how source MAC addresses are associated with the interfaces on the switch. If mode is specified as nomaconly, source MAC addresses are learned as pairs of incoming VLAN ID and the source MAC address. If mode is specified as maconly, all source MAC addresses are learned in a specified VLAN, VLAN ID of the VLAN the packet was received from is not remembered. This mode is used for General Purpose Service Based Tagging.
| |||||||||||||||||||||
| SmsanAddressLearningVlanId | 1.3.6.1.4.1.1332.1.1.5.3.13.3.2 | Integer32 (1..4094) | RW | deprecated | |||||||||||||||||
scalar · Integer32 (1..4094) · read-write · deprecated This is the VLAN ID which is used for learning source MAC addresses in maconly mode. All learned MAC addresses will be marked as received from this VLAN. VLAN with this VLAN ID is created on the switch and all physical intefaces are added to this VLAN. This VLAN ID cannot be used for configuring other VLANs on the switch. | |||||||||||||||||||||
| SmsanSwitchAddressAgingTimeout | 1.3.6.1.4.1.1332.1.1.5.3.13.3.3 | INTEGER (10..1000000) | RW | 300 | |||||||||||||||||
scalar · INTEGER (10..1000000) · read-write · current The FDB entry's address aging timeout (in seconds). Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanDiagnostics | 1.3.6.1.4.1.1332.1.1.5.3.14 | ||||||||||||||||||||
| NmsanDiagnosticsGlobal | 1.3.6.1.4.1.1332.1.1.5.3.14.1 | ||||||||||||||||||||
| SmsanDiagnosticsFanSpeedLevel | 1.3.6.1.4.1.1332.1.1.5.3.14.1.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MSAN shelf fan current speed level. Higher level defines higer speed. Level 0 means fan is stopped. Maximum level is defined by parameter msanDiagnosticsMaxFanSpeedLevel | |||||||||||||||||||||
| SmsanDiagnosticsMaxFanSpeedLevel | 1.3.6.1.4.1.1332.1.1.5.3.14.1.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MSAN shelf fan max speed level. | |||||||||||||||||||||
| TmsanDiagnosticsTestTable | 1.3.6.1.4.1.1332.1.1.5.3.14.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDiagnosticsTestEntry | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1 | NA | |||||||||||||||||||
| CmsanDiagnosticsTestCode | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1.1 | Integer32 (0..99999999) | NA | ||||||||||||||||||
column · Integer32 (0..99999999) · not-accessible · current Unique identification of a test program. | |||||||||||||||||||||
| CmsanDiagnosticsTestName | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1.2 | OCTET STRING | RO | diskUsageTest | |||||||||||||||||
column · OCTET STRING · read-only · current The name of a test program. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTestActivity | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1.3 | INTEGER | RW | testOn(1) | |||||||||||||||||
column · INTEGER · read-write · current Specifies the Test activity parameter for the diagnostic.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTestTime | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1.4 | Unsigned32 (100..999999900) | RW | 60000 | |||||||||||||||||
column · Unsigned32 (100..999999900) · read-write · current Test time, whose interpretation depends on test running mode: - for cyclical tests, it means the period at which the test is carried out one after another (time unit is milisecond) - for all others, it means time of day in the form 'hhmmss' (e.g. '224950') at which the test begins. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTestPriority | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1.6 | INTEGER | RW | high(2) | |||||||||||||||||
column · INTEGER · read-write · current Test priority parameter for the diagnostic.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTestType | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1.7 | INTEGER | RO | testPeriodically(2) | |||||||||||||||||
column · INTEGER · read-only · current Type of starting the test.
DECIMAL VALUE DESCRIPTION
1 At start-up & Recovery
2 Periodical
3 Daily
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTestTimeMin | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1.8 | Integer32 | RO | 60000 | |||||||||||||||||
column · Integer32 · read-only · current Minimum possible value of parameter msanDiagnosticTestTime. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTestTimeMax | 1.3.6.1.4.1.1332.1.1.5.3.14.2.1.9 | Integer32 | RO | 3600000 | |||||||||||||||||
column · Integer32 · read-only · current Maximum possible value of parameter msanDiagnosticTestTime. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDiagnosticsErrorTable | 1.3.6.1.4.1.1332.1.1.5.3.14.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDiagnosticsErrorEntry | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1 | NA | |||||||||||||||||||
| CmsanDiagnosticsErrorCode | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.1 | Integer32 (0..99999999) | NA | ||||||||||||||||||
column · Integer32 (0..99999999) · not-accessible · current Unique identification of an error reported during testing an object. | |||||||||||||||||||||
| CmsanDiagnosticsErrorDescription | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.2 | OCTET STRING | RO | Application not running | |||||||||||||||||
column · OCTET STRING · read-only · current Description of the error code. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsErrorPriority | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.3 | INTEGER | RW | critical(1) | |||||||||||||||||
column · INTEGER · read-write · current Error priority.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsErrorObjectType | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.4 | OCTET STRING | RO | Processing Error | |||||||||||||||||
column · OCTET STRING · read-only · current Object type - List of values can be found in alr_def.h Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsErrorMeasure | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.5 | OCTET STRING | RO | No measure | |||||||||||||||||
column · OCTET STRING · read-only · current Measure (what is done when an error occurs, for instance reset the node, ...) - List of values can be found in alr_def.h Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsErrorMeasureActive | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.6 | INTEGER | RW | active(1) | |||||||||||||||||
column · INTEGER · read-write · current Activity of measure. With setting this parameter to notActive(0), you can prevent excecution of measure.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsErrorProbableCause | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.7 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Probable cause. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsErrorObjectTypeId | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.8 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Object type ID- List of values can be found in alr_def.h Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsErrorMeasureId | 1.3.6.1.4.1.1332.1.1.5.3.14.3.1.9 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Measure (what is done when an error occurs, for instance reset the node, ...) - List of values can be found in alr_def.h Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDiagnosticsTempTable | 1.3.6.1.4.1.1332.1.1.5.3.14.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDiagnosticsTempEntry | 1.3.6.1.4.1.1332.1.1.5.3.14.4.1 | NA | |||||||||||||||||||
| CmsanDiagnosticsTempSensorID | 1.3.6.1.4.1.1332.1.1.5.3.14.4.1.1 | Integer32 (0..100) | NA | ||||||||||||||||||
column · Integer32 (0..100) · not-accessible · current Temperature sensor ID. | |||||||||||||||||||||
| CmsanDiagnosticsTempSensorName | 1.3.6.1.4.1.1332.1.1.5.3.14.4.1.2 | OCTET STRING | RO | T_AMB | |||||||||||||||||
column · OCTET STRING · read-only · current Temperature sensor name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTempCurrent | 1.3.6.1.4.1.1332.1.1.5.3.14.4.1.3 | Integer32 | RO | 22 | |||||||||||||||||
column · Integer32 · read-only · current Current temperature of the specified sensor in [deg C]. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTempCriticUnderheatThreshold | 1.3.6.1.4.1.1332.1.1.5.3.14.4.1.4 | Integer32 | RO | -10 | |||||||||||||||||
column · Integer32 · read-only · current Sensor critical underheat threshold temperature limit in [deg C]. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTempUnderheatThreshold | 1.3.6.1.4.1.1332.1.1.5.3.14.4.1.5 | Integer32 | RO | -5 | |||||||||||||||||
column · Integer32 · read-only · current Sensor underheat temperature threshold limit in [deg C]. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTempOverheatThreshold | 1.3.6.1.4.1.1332.1.1.5.3.14.4.1.6 | Integer32 | RO | 70 | |||||||||||||||||
column · Integer32 · read-only · current Sensor overheat threshold temperature limit in [deg C]. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsTempCriticOverheatThreshold | 1.3.6.1.4.1.1332.1.1.5.3.14.4.1.7 | Integer32 | RO | 75 | |||||||||||||||||
column · Integer32 · read-only · current Sensor critical overheat threshold temperature limit in [deg C]. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDiagnosticsErrorFilterTable | 1.3.6.1.4.1.1332.1.1.5.3.14.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDiagnosticsErrorFilterEntry | 1.3.6.1.4.1.1332.1.1.5.3.14.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanDiagnosticsErrorFilterErrMask | 1.3.6.1.4.1.1332.1.1.5.3.14.5.1.1 | OCTET STRING (SIZE (1..20)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..20)) · not-accessible · current Error code in ascii format. Regular expression describing one or more error codes. | |||||||||||||||||||||
| CmsanDiagnosticsErrorFilterObjMask | 1.3.6.1.4.1.1332.1.1.5.3.14.5.1.2 | OCTET STRING (SIZE (1..40)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..40)) · not-accessible · current Type of object, which alarming is filtered for. Regular expression describing one or more test objects. | |||||||||||||||||||||
| CmsanDiagnosticsErrorFilterRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.14.5.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanDiagnosticsErrorSeverityTable | 1.3.6.1.4.1.1332.1.1.5.3.14.6 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDiagnosticsErrorSeverityEntry | 1.3.6.1.4.1.1332.1.1.5.3.14.6.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanDiagnosticsErrorSeverityErrCode | 1.3.6.1.4.1.1332.1.1.5.3.14.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Unique identification of an error reported during testing an object. All error codes are stated in alr_def.h (KFMT) | |||||||||||||||||||||
| CmsanDiagnosticsErrorSeverityErrPriority | 1.3.6.1.4.1.1332.1.1.5.3.14.6.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Priority of error.
| |||||||||||||||||||||
| CmsanDiagnosticsErrorSeverityObjMask | 1.3.6.1.4.1.1332.1.1.5.3.14.6.1.3 | OCTET STRING (SIZE (1..40)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..40)) · not-accessible · current Type of object, which alarming is filtered for. Regular expression describing one or more test objects. | |||||||||||||||||||||
| CmsanDiagnosticsErrorSeverityRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.14.6.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5) [createAndGo(4) is not supported]. | |||||||||||||||||||||
| TmsanDiagnosticsExtAlrSensorTable | 1.3.6.1.4.1.1332.1.1.5.3.14.7 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDiagnosticsExtAlrSensorEntry | 1.3.6.1.4.1.1332.1.1.5.3.14.7.1 | NA | |||||||||||||||||||
| CmsanDiagnosticsExtAlrSensorName | 1.3.6.1.4.1.1332.1.1.5.3.14.7.1.1 | DisplayString | NA | ||||||||||||||||||
column · DisplayString · not-accessible · current Description. | |||||||||||||||||||||
| CmsanDiagnosticsExtAlrSensorAlarm | 1.3.6.1.4.1.1332.1.1.5.3.14.7.1.2 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Description.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsExtAlrSensorLogic | 1.3.6.1.4.1.1332.1.1.5.3.14.7.1.3 | INTEGER | RW | open(1) | |||||||||||||||||
column · INTEGER · read-write · current Description.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanDiagnosticsFanTable | 1.3.6.1.4.1.1332.1.1.5.3.14.8 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDiagnosticsFanEntry | 1.3.6.1.4.1.1332.1.1.5.3.14.8.1 | NA | |||||||||||||||||||
| CmsanDiagnosticsFanId | 1.3.6.1.4.1.1332.1.1.5.3.14.8.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Fan id | |||||||||||||||||||||
| CmsanDiagnosticsFanCurrentRpm | 1.3.6.1.4.1.1332.1.1.5.3.14.8.1.2 | Integer32 | RO | 10250 | |||||||||||||||||
column · Integer32 · read-only · current Fan current RPM (rotations per minute) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanDiagnosticsFanCurrentPercentRpm | 1.3.6.1.4.1.1332.1.1.5.3.14.8.1.3 | Integer32 | RO | 34 | |||||||||||||||||
column · Integer32 · read-only · current Fan current percent of Max RPM (rotations per minute) Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanPpp | 1.3.6.1.4.1.1332.1.1.5.3.15 | ||||||||||||||||||||
| NmsanPppGlobal | 1.3.6.1.4.1.1332.1.1.5.3.15.1 | ||||||||||||||||||||
| SmsanPppLocalIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.15.1.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Local IP address for PPP connection | |||||||||||||||||||||
| SmsanPppRemoteIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.15.1.2 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Remote IP address for PPP connection | |||||||||||||||||||||
| SmsanPppAuthProtocol | 1.3.6.1.4.1.1332.1.1.5.3.15.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current PPP authentication protocol. For MPS connection use CHAP.
| |||||||||||||||||||||
| SmsanPppEchoInterval | 1.3.6.1.4.1.1332.1.1.5.3.15.1.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current LCP echo interval (in seconds) for session breakdown identification.
| |||||||||||||||||||||
| SmsanPppVanJacobsonCompression | 1.3.6.1.4.1.1332.1.1.5.3.15.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Control of VanJacobson compression. For MPS connection it must be disabled.
| |||||||||||||||||||||
| SmsanPppAdminState | 1.3.6.1.4.1.1332.1.1.5.3.15.1.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Global PPP connection administrative state.
| |||||||||||||||||||||
| NmsanAlarmPanel | 1.3.6.1.4.1.1332.1.1.5.3.16 | ||||||||||||||||||||
| NmsanAlarmPanelGlobal | 1.3.6.1.4.1.1332.1.1.5.3.16.1 | ||||||||||||||||||||
| SmsanAlarmPanelAudioAlarmPriority | 1.3.6.1.4.1.1332.1.1.5.3.16.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Alarm Panel Audio Alarm Priority.
| |||||||||||||||||||||
| SmsanAlarmPanelSerialPortType | 1.3.6.1.4.1.1332.1.1.5.3.16.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Type of equipment connected to serial port.
| |||||||||||||||||||||
| TmsanAlarmPanelTable | 1.3.6.1.4.1.1332.1.1.5.3.16.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanAlarmPanelEntry | 1.3.6.1.4.1.1332.1.1.5.3.16.2.1 | NA | |||||||||||||||||||
| CmsanAlarmPanelIndex | 1.3.6.1.4.1.1332.1.1.5.3.16.2.1.1 | Integer32 (1..16) | NA | ||||||||||||||||||
column · Integer32 (1..16) · not-accessible · current Unique identification of an alarm panel. | |||||||||||||||||||||
| CmsanAlarmPanelConnectionState | 1.3.6.1.4.1.1332.1.1.5.3.16.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Alarm panel connection status
| |||||||||||||||||||||
| CmsanAlarmPanelAdminState | 1.3.6.1.4.1.1332.1.1.5.3.16.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Flag determining whether an alarm panel is equipped or not.
| |||||||||||||||||||||
| TmsanAlarmPanelIndicatorTable | 1.3.6.1.4.1.1332.1.1.5.3.16.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanAlarmPanelIndicatorEntry | 1.3.6.1.4.1.1332.1.1.5.3.16.3.1 | NA | |||||||||||||||||||
| CmsanAlarmPanelIndicatorIndex | 1.3.6.1.4.1.1332.1.1.5.3.16.3.1.1 | Integer32 (1..15) | NA | ||||||||||||||||||
column · Integer32 (1..15) · not-accessible · current Alarm panel indicator number. | |||||||||||||||||||||
| CmsanAlarmPanelIndicatorErrCode | 1.3.6.1.4.1.1332.1.1.5.3.16.3.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Alarm panel indicator error number. | |||||||||||||||||||||
| TmsanAlarmPanelInputTable | 1.3.6.1.4.1.1332.1.1.5.3.16.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanAlarmPanelInputEntry | 1.3.6.1.4.1.1332.1.1.5.3.16.4.1 | NA | |||||||||||||||||||
| CmsanAlarmPanelInputIndex | 1.3.6.1.4.1.1332.1.1.5.3.16.4.1.1 | Integer32 (1..15) | NA | ||||||||||||||||||
column · Integer32 (1..15) · not-accessible · current Alarm panel input sensor number. | |||||||||||||||||||||
| CmsanAlarmPanelInputErrCode | 1.3.6.1.4.1.1332.1.1.5.3.16.4.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Alarm panel input sensor error code. | |||||||||||||||||||||
| CmsanAlarmPanelInputActiveLevel | 1.3.6.1.4.1.1332.1.1.5.3.16.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Alarm panel input sensor active level.
| |||||||||||||||||||||
| NmsanMvr | 1.3.6.1.4.1.1332.1.1.5.3.17 | ||||||||||||||||||||
| NmsanMvrGlobal | 1.3.6.1.4.1.1332.1.1.5.3.17.1 | ||||||||||||||||||||
| TmsanMvrPortTable | 1.3.6.1.4.1.1332.1.1.5.3.17.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMvrPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.17.2.1 | NA | |||||||||||||||||||
| CmsanMvrPortAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.17.2.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Administrative mode for Multicast VLAN Registration (a.k.a. Service Based Tagging) for the selected interface
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanMvrMulticastGroupTable | 1.3.6.1.4.1.1332.1.1.5.3.17.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMvrMulticastGroupEntry | 1.3.6.1.4.1.1332.1.1.5.3.17.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanMvrMulticastGroupMVlanId | 1.3.6.1.4.1.1332.1.1.5.3.17.3.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current VLAN ID (refers to dot1qVlanIndex) where MVR functionality is used. | |||||||||||||||||||||
| CmsanMvrMulticastGroupStartIp | 1.3.6.1.4.1.1332.1.1.5.3.17.3.1.2 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current Start IP Address of the multicast group range. | |||||||||||||||||||||
| CmsanMvrMulticastGroupEndIp | 1.3.6.1.4.1.1332.1.1.5.3.17.3.1.3 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current End IP Address of the multicast group range. | |||||||||||||||||||||
| CmsanMvrMulticastGroupRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.17.3.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. | |||||||||||||||||||||
| TmsanMvrConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.17.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMvrConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.17.4.1 | NA | |||||||||||||||||||
| CmsanMvrConfigCVlanId | 1.3.6.1.4.1.1332.1.1.5.3.17.4.1.1 | Integer32 (1..4094) | NA | ||||||||||||||||||
column · Integer32 (1..4094) · not-accessible · current Customer VLAN ID for the selected interface from which IGMP Join/Leave messages will be remarked. | |||||||||||||||||||||
| CmsanMvrConfigMVlanId | 1.3.6.1.4.1.1332.1.1.5.3.17.4.1.2 | Integer32 (1..4092) | NA | ||||||||||||||||||
column · Integer32 (1..4092) · not-accessible · current Service provider multicast VLAN ID for the selected interface to which IGMP Join/Leave messages will be remarked. | |||||||||||||||||||||
| CmsanMvrConfigCos | 1.3.6.1.4.1.1332.1.1.5.3.17.4.1.3 | Integer32 (-1..7) | RW | ||||||||||||||||||
column · Integer32 (-1..7) · read-write · current Output CoS priority on the selected interface. IGMP messages received from this interface will have this priority when they are transmitted into service provider multicast VLAN. Value '-1' defines that original CoS value is not changed. | |||||||||||||||||||||
| CmsanMvrConfigRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.17.4.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMvrDvlanTable | 1.3.6.1.4.1.1332.1.1.5.3.17.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMvrDvlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.17.5.1 | NA | |||||||||||||||||||
| CmsanMvrDvlanRmOuterTagStatus | 1.3.6.1.4.1.1332.1.1.5.3.17.5.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current The desired state of removing outer tags on IGMP packets funcionality.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanMvrDvlanEthertypeRewriteStatus | 1.3.6.1.4.1.1332.1.1.5.3.17.5.1.2 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current The desired state of rewriting ether type from outer vlan tag to inner vlan tag.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanRemoteAccess | 1.3.6.1.4.1.1332.1.1.5.3.18 | ||||||||||||||||||||
| NmsanRemoteAccessGlobal | 1.3.6.1.4.1.1332.1.1.5.3.18.1 | ||||||||||||||||||||
| TmsanRemoteAccessFilterTable | 1.3.6.1.4.1.1332.1.1.5.3.18.2 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Description. | |||||||||||||||||||||
| RmsanRemoteAccessFilterEntry | 1.3.6.1.4.1.1332.1.1.5.3.18.2.1 | NA | deprecated | ||||||||||||||||||
| CmsanRemoteAccessFilterRuleIndex | 1.3.6.1.4.1.1332.1.1.5.3.18.2.1.1 | INTEGER (1..200) | NA | deprecated | |||||||||||||||||
column · INTEGER (1..200) · not-accessible · deprecated Rule's index. Index should be continued, without gaps. | |||||||||||||||||||||
| CmsanRemoteAccessFilterIp | 1.3.6.1.4.1.1332.1.1.5.3.18.2.1.2 | IpAddress | RC | deprecated | |||||||||||||||||
column · IpAddress · read-create · deprecated IP Address of the rule. | |||||||||||||||||||||
| CmsanRemoteAccessFilterNetmask | 1.3.6.1.4.1.1332.1.1.5.3.18.2.1.3 | IpAddress | RC | deprecated | |||||||||||||||||
column · IpAddress · read-create · deprecated Netmask of the rule. | |||||||||||||||||||||
| CmsanRemoteAccessFilterAction | 1.3.6.1.4.1.1332.1.1.5.3.18.2.1.4 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated Action to be taken with a packet: accept or deny it.
| |||||||||||||||||||||
| CmsanRemoteAccessFilterRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.18.2.1.5 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. | |||||||||||||||||||||
| NmsanDslSpecific | 1.3.6.1.4.1.1332.1.1.5.3.19 | ||||||||||||||||||||
| NmsanDslSpecificGlobal | 1.3.6.1.4.1.1332.1.1.5.3.19.1 | ||||||||||||||||||||
| SmsanDslSpecificSystemState | 1.3.6.1.4.1.1332.1.1.5.3.19.1.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current VDSL system operational state. For normal blade operation this value should be operational (4). If value differ from 4, VDSL driver is not operational.
| |||||||||||||||||||||
| SmsanDslSpecificSystemFirmware | 1.3.6.1.4.1.1332.1.1.5.3.19.1.2 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current VDSL firmware version. | |||||||||||||||||||||
| SmsanDslSpecificVectoringAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.19.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current DSL vectoring admin mode.
| |||||||||||||||||||||
| TmsanDslSpecificTable | 1.3.6.1.4.1.1332.1.1.5.3.19.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDslSpecificEntry | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1 | NA | |||||||||||||||||||
| CmsanDslSpecificDsPsdMask | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.1 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current Unique name of the downstream PSD mask as defined by msanDslPsdMaskDsName. | |||||||||||||||||||||
| CmsanDslSpecificUsPsdMask | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.2 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current Unique name of the upstream PSD mask as defined by msanDslPsdMaskUsName. | |||||||||||||||||||||
| CmsanDslSpecificLineState | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current VDSL system operational state. For normal blade operation this value should be active(3). If value is differ from 3, VDSL driver is not operational.
| |||||||||||||||||||||
| CmsanDslSpecificMaxDelayDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.4 | Integer32 (-1..63) | RW | ||||||||||||||||||
column · Integer32 (-1..63) · read-write · current Maximum interleave delay for the downstream interleaved channel. -1 means that value from profile will be used (xdsl2ChConfProfMaxDelayDs). This object is created based on xdsl2ChConfProfMaxDelayDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMaxDelayUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.5 | Integer32 (-1..63) | RW | ||||||||||||||||||
column · Integer32 (-1..63) · read-write · current Maximum interleave delay for the upstream interleaved channel. -1 means that value from profile will be used (xdsl2ChConfProfMaxDelayUs). This object is created based on xdsl2ChConfProfMaxDelayUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMinProtectionDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.6 | Integer32 (-1..160) | RW | ||||||||||||||||||
column · Integer32 (-1..160) · read-write · current Downstream impulse noise protection. -1 means that value from profile will be used (xdsl2ChConfProfMinProtectionDs) This object is created based on xdsl2ChConfProfMinProtectionDs(VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMinProtectionUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.7 | Integer32 (-1..160) | RW | ||||||||||||||||||
column · Integer32 (-1..160) · read-write · current Upstream impulse noise protection. -1 means that value from profile will be used (xdsl2ChConfProfMinProtectionUs) This object is created based on xdsl2ChConfProfMinProtectionUs(VDSL2-LINE MIB) | |||||||||||||||||||||
| CmsanDslSpecificMaxSnrmDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.8 | Unsigned32 (0..310) | RW | ||||||||||||||||||
column · Unsigned32 (0..310) · read-write · current Downstream maximum Signal/Noise Margin. This object is created based on xdsl2LConfProfMaxSnrmDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMinSnrmDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.9 | Unsigned32 (0..310) | RW | ||||||||||||||||||
column · Unsigned32 (0..310) · read-write · current Downstream minimum Signal/Noise Margin. This object is created based on xdsl2LConfProfMinSnrmDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMaxSnrmUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.10 | Unsigned32 (0..310) | RW | ||||||||||||||||||
column · Unsigned32 (0..310) · read-write · current Upstream maximum Signal/Noise Margin. This object is created based on xdsl2LConfProfMaxSnrmUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMinSnrmUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.11 | Unsigned32 (0..310) | RW | ||||||||||||||||||
column · Unsigned32 (0..310) · read-write · current Upstream minimum Signal/Noise Margin. This object is created based on xdsl2LConfProfMinSnrmUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificRaUsNrmDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.12 | Unsigned32 (0..310) | RW | ||||||||||||||||||
column · Unsigned32 (0..310) · read-write · current The Downstream Up-Shift Noise Margin (for dynamic rate adaptive mode). This object is created based on xdsl2LConfProfRaUsNrmDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificRaUsNrmUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.13 | Unsigned32 (0..310) | RW | ||||||||||||||||||
column · Unsigned32 (0..310) · read-write · current The Upstream Up-Shift Noise Margin (for dynamic rate adaptive mode). This object is created based on xdsl2LConfProfRaUsNrmUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificRaUsTimeDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.14 | Unsigned32 (0..16383) | RW | ||||||||||||||||||
column · Unsigned32 (0..16383) · read-write · current The Downstream Up-Shift Time Interval (for rate dynamic adaptive mode). This object is created based on xdsl2LConfProfRaUsTimeDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificRaUsTimeUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.15 | Unsigned32 (0..16383) | RW | ||||||||||||||||||
column · Unsigned32 (0..16383) · read-write · current The Upstream Up-Shift Time Interval (for rate dynamic adaptive mode). This object is created based on xdsl2LConfProfRaUsTimeUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificRaDsNrmDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.16 | Unsigned32 (0..310) | RW | ||||||||||||||||||
column · Unsigned32 (0..310) · read-write · current The Downstream Down-Shift Noise Margin (for dynamic rate adaptive mode). This object is created based on xdsl2LConfProfRaDsNrmDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificRaDsNrmUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.17 | Unsigned32 (0..310) | RW | ||||||||||||||||||
column · Unsigned32 (0..310) · read-write · current The Upstream Down-Shift Noise Margin (for dynamic rate adaptive mode). This object is created based on xdsl2LConfProfRaDsNrmUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificRaDsTimeDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.18 | Unsigned32 (0..16383) | RW | ||||||||||||||||||
column · Unsigned32 (0..16383) · read-write · current The Downstream Down-Shift Time Interval (for rate dynamic adaptive mode). This object is created based on xdsl2LConfProfRaDsTimeDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificRaDsTimeUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.19 | Unsigned32 (0..16383) | RW | ||||||||||||||||||
column · Unsigned32 (0..16383) · read-write · current The Upstream Down-Shift Time Interval (for rate dynamic adaptive mode). This object is created based on xdsl2LConfProfRaDsTimeUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificL0Time | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.20 | Unsigned32 (0..255) | RW | ||||||||||||||||||
column · Unsigned32 (0..255) · read-write · current The minimum time between an exit from the L2 state and the next entry into the L2 state. This object is created based on xdsl2LConfProfL0Time (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificL2Time | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.21 | Unsigned32 (0..255) | RW | ||||||||||||||||||
column · Unsigned32 (0..255) · read-write · current The minimum time between an entry into the L2 state and the first power trim in the L2 state and between two consecutive power trims in the L2 State. This object is created based on xdsl2LConfProfL2Time (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificL2Atpr | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.22 | Unsigned32 (0..31) | RW | ||||||||||||||||||
column · Unsigned32 (0..31) · read-write · current The maximum aggregate transmit power reduction that can be performed at transition of L0 to L2 state or through a single power trim in the L2 state. This object is created based on xdsl2LConfProfL2Atpr (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificL2Atprt | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.23 | Unsigned32 (0..31) | RW | ||||||||||||||||||
column · Unsigned32 (0..31) · read-write · current The total maximum aggregate transmit power reduction that can be performed in an L2 state. This object is created based on xdsl2LConfProfL2Atprt (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificScMaskDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.24 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · current Downstream Sub-carriers mask. A bitmap of 4096 bits that allows masking up to 4096 downstream sub-carriers. If bit is set to '1', the respective downstream sub-carrier is masked (not used), and if set to '0', the respective sub-carrier is unmasked. This object is created based on xdsl2LConfProfScMaskDs (VDSL2-LINE MIB) | |||||||||||||||||||||
| CmsanDslSpecificScMaskUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.25 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · current Upstream Sub-carriers mask. A bitmap of 4096 bits that allows masking up to 4096 downstream sub-carriers. If bit is set to '1', the respective downstream sub-carrier is masked (not used), and if set to '0', the respective sub-carrier is unmasked. This object is created based on xdsl2LConfProfScMaskUs (VDSL2-LINE MIB) | |||||||||||||||||||||
| CmsanDslSpecificRfiBands | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.26 | OCTET STRING (SIZE (0..64)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-write · current For VDLS, this configuration parameter defines the bands where the PSD shall be reduced. Each band shall be represented by a start and stop subcarrier indices with a subcarrier spacing of 4.3125 kHz. Up to 16 bands may be specified. This parameter defines the RFI bands for both upstream and downstream directions. Each RFI band is represented by 4 octets: 16 bit start sub-carrier index followed by a 16 bit stop sub-carrier index. This object is created based on xdsl2LConfProfRfiBands (VDSL2-LINE MIB) | |||||||||||||||||||||
| CmsanDslSpecificMaxNomPsdDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.27 | Integer32 (-600..-300) | RW | ||||||||||||||||||
column · Integer32 (-600..-300) · read-write · current The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. (0.1 dBm/Hz - physical values are -60 to -30 dBm/Hz). This object is created based on xdsl2LConfProfMaxNomPsdDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMaxNomPsdUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.28 | Integer32 (-600..-300) | RW | ||||||||||||||||||
column · Integer32 (-600..-300) · read-write · current The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. (0.1 dBm/Hz - physical values are -60 to -30 dBm/Hz). This object is created based on xdsl2LConfProfMaxNomPsdUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMaxNomAtpDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.29 | Unsigned32 (0..255) | RW | ||||||||||||||||||
column · Unsigned32 (0..255) · read-write · current The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. (0.1 dBm - physical values are 0 to 25.5 dBm). This object is created based on xdsl2LConfProfMaxNomAtpDs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMaxNomAtpUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.30 | Unsigned32 (0..255) | RW | ||||||||||||||||||
column · Unsigned32 (0..255) · read-write · current The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. (0.1 dBm - physical values are 0 to 25.5 dBm). This object is created based on xdsl2LConfProfMaxNomAtpUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificMaxAggRxPwrUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.31 | Integer32 (-255..255) | RW | ||||||||||||||||||
column · Integer32 (-255..255) · read-write · current The maximum upstream aggregate receive power over the relevant set of sub-carriers.. (0.1 dBm - physical values are -25.5 to 25.5 dBm). This object is created based on xdsl2LConfProfMaxAggRxPwrUs (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificClassMask | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.32 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Predefined PSD mask. This object is created based on xdsl2LConfProfClassMask (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificDpboEsEL | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.35 | Unsigned32 (0..511) | RW | ||||||||||||||||||
column · Unsigned32 (0..511) · read-write · current Assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet). The electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency. 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. This object is created based on xdsl2LConfProfDpboEsEL (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificUpboKLF | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.36 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Defines the upstream power backoff force mode. The three possible mode values are: auto(1), override(2), disableUpbo(3). This object is created based on xdsl2LConfProfUpboKLF (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificUpboKL | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.37 | Unsigned32 (0..1280) | RW | ||||||||||||||||||
column · Unsigned32 (0..1280) · read-write · current This configuration parameter defines the electrical length expressed in dB at 1MHz, configured by the CO-MIB. The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. This object is created based on xdsl2LConfProfUpboKL (VDSL2-LINE MIB)
| |||||||||||||||||||||
| CmsanDslSpecificSelt | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.39 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Defines whether the line should be forced into the SELT (Single-Ended Loop Testing) diagnostics mode by the near-end xTU of this line. Upon completion of the loop diagnostic mode procedures, the Access Node shall set this object to 'inhibit'. The results of the SELT procedure are stored in the table msanDslSeltStatusTable. The status of the loop diagnostic procedure is indicated by msanDslSpecificSeltStatus.
| |||||||||||||||||||||
| CmsanDslSpecificSeltStatus | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.40 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current SELT (Single-Ended Loop Testing) status of dsl line.
| |||||||||||||||||||||
| CmsanDslSpecificPhyRDs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.41 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Physical Layer Retransmission configuration in the downstream direction.
| |||||||||||||||||||||
| CmsanDslSpecificPhyRUs | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.42 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Physical Layer Retransmission configuration in the upstream direction.
| |||||||||||||||||||||
| CmsanDslSpecificUpboUs1a | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.43 | INTEGER (4000..8095) | RW | ||||||||||||||||||
column · INTEGER (4000..8095) · read-write · current ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb) Parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBO PSD defined for each band shall consist of two parameters [a, b]. Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in the respective upstream band.
| |||||||||||||||||||||
| CmsanDslSpecificUpboUs1b | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.44 | INTEGER (0..4095) | RW | ||||||||||||||||||
column · INTEGER (0..4095) · read-write · current ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb) Parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. Parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
| |||||||||||||||||||||
| CmsanDslSpecificUpboUs2a | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.45 | INTEGER (4000..8095) | RW | ||||||||||||||||||
column · INTEGER (4000..8095) · read-write · current ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb) Parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBO PSD defined for each band shall consist of two parameters [a, b]. Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in the respective upstream band.
| |||||||||||||||||||||
| CmsanDslSpecificUpboUs2b | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.46 | INTEGER (0..4095) | RW | ||||||||||||||||||
column · INTEGER (0..4095) · read-write · current ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb) Parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. Parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
| |||||||||||||||||||||
| CmsanDslSpecificUpboUs3a | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.47 | INTEGER (4000..8095) | RW | ||||||||||||||||||
column · INTEGER (4000..8095) · read-write · current ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb) Parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBO PSD defined for each band shall consist of two parameters [a, b]. Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in the respective upstream band.
| |||||||||||||||||||||
| CmsanDslSpecificUpboUs3b | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.48 | INTEGER (0..4095) | RW | ||||||||||||||||||
column · INTEGER (0..4095) · read-write · current ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb) Parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. Parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
| |||||||||||||||||||||
| CmsanDslSpecificUpboUs4a | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.49 | INTEGER (4000..8095) | RW | ||||||||||||||||||
column · INTEGER (4000..8095) · read-write · current ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb) Parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBO PSD defined for each band shall consist of two parameters [a, b]. Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in the respective upstream band.
| |||||||||||||||||||||
| CmsanDslSpecificUpboUs4b | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.50 | INTEGER (0..4095) | RW | ||||||||||||||||||
column · INTEGER (0..4095) · read-write · current ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb) Parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. Parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
| |||||||||||||||||||||
| CmsanDslSpecificDpboEPsdMask | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.51 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current DPbo EPsd mask name. It should be of the downstream PSD mask as defined by msanDslPsdMaskDsName. | |||||||||||||||||||||
| CmsanDslSpecificDpboEsCmA | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.52 | Unsigned32 (0..640) | RC | ||||||||||||||||||
column · Unsigned32 (0..640) · read-create · current ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMA) The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables connecting exchange-based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back- off (DPBO) depending on this value. Possible values shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2-8 All values in the range are valid.
| |||||||||||||||||||||
| CmsanDslSpecificDpboEsCmB | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.53 | Unsigned32 (0..640) | RC | ||||||||||||||||||
column · Unsigned32 (0..640) · read-create · current ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMB) The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables connecting exchange-based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back- off (DPBO) depending on this value. Possible values shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2-8 All values in the range are valid.
| |||||||||||||||||||||
| CmsanDslSpecificDpboEsCmC | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.54 | Unsigned32 (0..640) | RC | ||||||||||||||||||
column · Unsigned32 (0..640) · read-create · current ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMC) The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables connecting exchange-based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back- off (DPBO) depending on this value. Possible values shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2-8 All values in the range are valid.
| |||||||||||||||||||||
| CmsanDslSpecificDpboMus | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.55 | Unsigned32 (0..255) | RC | ||||||||||||||||||
column · Unsigned32 (0..255) · read-create · current ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOMUS) Assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange-based services. It shall be coded as an unsigned integer representing a PSD mask level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid.
| |||||||||||||||||||||
| CmsanDslSpecificDpboFMin | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.56 | Unsigned32 (0..2048) | RC | ||||||||||||||||||
column · Unsigned32 (0..2048) · read-create · current ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMIN) Minimum frequency from which the DPBO shall be applied. It ranges from 0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps of 4.3125 kHz.
| |||||||||||||||||||||
| CmsanDslSpecificDpboFMax | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.57 | Unsigned32 (32..6956) | RC | ||||||||||||||||||
column · Unsigned32 (32..6956) · read-create · current ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMAX) Maximum frequency at which DPBO may be applied. It ranges from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.
| |||||||||||||||||||||
| CmsanDslSpecificVectorModeEnable | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.58 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current Type of vectoring initialization to be allowed by the VTU-O on the line. ITU-T G.997.1, paragraph #7.3.1.13.9 (VECTORMODE_ENABLE). This configuration parameter defines the vectoring initialization type to be allowed by the VTU-O on the line. It is coded in a bit-map representation (0 if not allowed, 1 if allowed).
| |||||||||||||||||||||
| CmsanDslSpecificVectorModeState | 1.3.6.1.4.1.1332.1.1.5.3.19.3.1.59 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Current vectoring initialization type on the line. Line can operate only in common vdsl2 (non/vectoring) or in one of vectoring modes therefore only one bit may be set to 1.
| |||||||||||||||||||||
| TmsanDslPsdMaskDsTable | 1.3.6.1.4.1.1332.1.1.5.3.19.4 | NA | |||||||||||||||||||
table · not-accessible · current Management of Downstream PSD Mask (G997.1 #7.3.1.2.9 ) | |||||||||||||||||||||
| RmsanDslPsdMaskDsEntry | 1.3.6.1.4.1.1332.1.1.5.3.19.4.1 | NA | |||||||||||||||||||
| CmsanDslPsdMaskDsName | 1.3.6.1.4.1.1332.1.1.5.3.19.4.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current Downstream custom PSD mask name. | |||||||||||||||||||||
| CmsanDslPsdMaskDsType | 1.3.6.1.4.1.1332.1.1.5.3.19.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Downstream custom PSD mask type. Possible values: default(1) - Default mask prepared by vendor, user is not allowed to delete or change it configured(2) - Mask created by user
| |||||||||||||||||||||
| CmsanDslPsdMaskDsShape | 1.3.6.1.4.1.1332.1.1.5.3.19.4.1.3 | Xdsl2PsdMaskDs | RW | ||||||||||||||||||
column · Xdsl2PsdMaskDs · read-write · current The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G.992.5. This is a string of 32 pairs of values in the following structure: Octets 0-1 - Index of the first subcarrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the subcarrier indicated in octets 0 and 1. Octets 3-5 - Same, for a second breakpoint. Octets 6-8 - Same, for a third breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 0 and NSCds-1. Each PSD reduction value is in the range 0 (0 dBm/Hz) to 255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz. Valid values are in the range 0 to 190 (0 to -95 dBm/Hz). When the number of breakpoints is less than 32, all remaining octets are set to the value '0'. Note that the content of this object should be correlated with the subcarrier mask and with the RFI setup. | |||||||||||||||||||||
| CmsanDslPsdMaskDsRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.19.4.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanDslPsdMaskUsTable | 1.3.6.1.4.1.1332.1.1.5.3.19.5 | NA | |||||||||||||||||||
table · not-accessible · current Management of Upstream PSD Mask (G997.1 #7.3.1.2.9 ) | |||||||||||||||||||||
| RmsanDslPsdMaskUsEntry | 1.3.6.1.4.1.1332.1.1.5.3.19.5.1 | NA | |||||||||||||||||||
| CmsanDslPsdMaskUsName | 1.3.6.1.4.1.1332.1.1.5.3.19.5.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current Upstream custom PSD mask name. | |||||||||||||||||||||
| CmsanDslPsdMaskUsType | 1.3.6.1.4.1.1332.1.1.5.3.19.5.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Downstream custom PSD mask type. Possible values: default(1) - Default mask prepared by vendor, user is not allowed to delete or change it configured(2) - Mask created by user
| |||||||||||||||||||||
| CmsanDslPsdMaskUsShape | 1.3.6.1.4.1.1332.1.1.5.3.19.5.1.3 | Xdsl2PsdMaskUs | RW | ||||||||||||||||||
column · Xdsl2PsdMaskUs · read-write · current The upstream PSD mask applicable at the U-R2 reference point. This parameter is used only for G.992.5, and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G.992.5. This is a string of 16 pairs of values in the following structure: Octets 0-1 - Index of the first subcarrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the subcarrier indicated in octets 0 and 1. Octets 3-5 - Same, for a second breakpoint. Octets 6-8 - Same, for a third breakpoint. This architecture continues until octets 9-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 0 and NSCus-1. Each PSD reduction value is in the range 0 (0 dBm/Hz) to 255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz. Valid values are in the range 0 to 190 (0 to -95 dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value '0'. Note that the content of this object should be correlated with the subcarrier mask and with the RFI setup. | |||||||||||||||||||||
| CmsanDslPsdMaskUsRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.19.5.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanDslSeltStatusTable | 1.3.6.1.4.1.1332.1.1.5.3.19.6 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanDslSeltStatusEntry | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1 | NA | |||||||||||||||||||
| CmsanDslSeltStatusNoiseType | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.1 | OCTET STRING (SIZE (0..30)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..30)) · read-only · current Noise type. | |||||||||||||||||||||
| CmsanDslSeltStatusNoiseMrgDs | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Noise margin in DS direction. [0.1 dB]
| |||||||||||||||||||||
| CmsanDslSeltStatusNoiseMrgUs | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Noise margin in US direction. [0.1 dB]
| |||||||||||||||||||||
| CmsanDslSeltStatusNumTonesDs | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of tones used for SELT in DS direction. | |||||||||||||||||||||
| CmsanDslSeltStatusNumTonesUs | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of tones used for SELT in US direction. | |||||||||||||||||||||
| CmsanDslSeltStatusMaxRateDs | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Maximum Downstream capacity [kbps]
| |||||||||||||||||||||
| CmsanDslSeltStatusMaxRateUs | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Maximum Upstream capacity [kbps]
| |||||||||||||||||||||
| CmsanDslSeltStatusCableType | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.8 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current DSL line loop type. | |||||||||||||||||||||
| CmsanDslSeltStatusCableLenght | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DSL line loop lenght. [m]
| |||||||||||||||||||||
| CmsanDslSeltStatusFitError | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DSL Line lenght fit error. [%]
| |||||||||||||||||||||
| CmsanDslSeltStatusLoopTermination | 1.3.6.1.4.1.1332.1.1.5.3.19.6.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Type of DSL line termination.
| |||||||||||||||||||||
| TmsanDslAtmPvcTable | 1.3.6.1.4.1.1332.1.1.5.3.19.7 | NA | |||||||||||||||||||
table · not-accessible · current ATM PVC configuration of the ADSL port | |||||||||||||||||||||
| RmsanDslAtmPvcEntry | 1.3.6.1.4.1.1332.1.1.5.3.19.7.1 | NA | |||||||||||||||||||
| CmsanDslAtmPvcVpi | 1.3.6.1.4.1.1332.1.1.5.3.19.7.1.2 | Integer32 (-1..255) | RW | ||||||||||||||||||
column · Integer32 (-1..255) · read-write · current ATM Virtual path identifier of the ADSL PVC interface. Value -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanDslAtmPvcVci | 1.3.6.1.4.1.1332.1.1.5.3.19.7.1.3 | Integer32 (31..65535) | RW | ||||||||||||||||||
column · Integer32 (31..65535) · read-write · current ATM Virtual channel identifier of the ADSL PVC interface. Value 31 indicates that parameter has not been defined. | |||||||||||||||||||||
| NmsanPortMirroring | 1.3.6.1.4.1.1332.1.1.5.3.20 | ||||||||||||||||||||
| NmsanPortMirroringGlobal | 1.3.6.1.4.1.1332.1.1.5.3.20.1 | ||||||||||||||||||||
| TmsanPortMirroringTable | 1.3.6.1.4.1.1332.1.1.5.3.20.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortMirroringEntry | 1.3.6.1.4.1.1332.1.1.5.3.20.2.1 | NA | |||||||||||||||||||
| CmsanPortMirroringSessionId | 1.3.6.1.4.1.1332.1.1.5.3.20.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The Session number of this mirroring entry. | |||||||||||||||||||||
| CmsanPortMirroringAdminState | 1.3.6.1.4.1.1332.1.1.5.3.20.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The status of this port mirroring session.
| |||||||||||||||||||||
| CmsanPortMirroringDestPort | 1.3.6.1.4.1.1332.1.1.5.3.20.2.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The port which traffic from the mirrored ports will be sent to. Port value is ifIndex from ifTable. Value 0 means, port is not defined. | |||||||||||||||||||||
| TmsanPortMirroringMemberTable | 1.3.6.1.4.1.1332.1.1.5.3.20.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortMirroringMemberEntry | 1.3.6.1.4.1.1332.1.1.5.3.20.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanPortMirroringMemberSrcPort | 1.3.6.1.4.1.1332.1.1.5.3.20.3.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The port from which traffic will be sent to the destination port. | |||||||||||||||||||||
| CmsanPortMirroringMemberDirection | 1.3.6.1.4.1.1332.1.1.5.3.20.3.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The direction of the data to be mirrored on this source port.
| |||||||||||||||||||||
| CmsanPortMirroringMemberRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.20.3.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. | |||||||||||||||||||||
| NmsanResetWithDelay | 1.3.6.1.4.1.1332.1.1.5.3.21 | ||||||||||||||||||||
| NmsanResetWithDelayGlobal | 1.3.6.1.4.1.1332.1.1.5.3.21.1 | ||||||||||||||||||||
| SmsanResetDelay | 1.3.6.1.4.1.1332.1.1.5.3.21.1.1 | INTEGER (0..3600) | RW | 0 | |||||||||||||||||
scalar · INTEGER (0..3600) · read-write · current Delay in seconds before reset will be performed. If set to 0, reset countdown is stopped and reset is cancelled. This parameter returns number of seconds before reset. If it returns 0, reset with delay was not initiated.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanMacTable | 1.3.6.1.4.1.1332.1.1.5.3.22 | ||||||||||||||||||||
| NmsanMacTableGlobal | 1.3.6.1.4.1.1332.1.1.5.3.22.1 | ||||||||||||||||||||
| SmsanMacTableLength | 1.3.6.1.4.1.1332.1.1.5.3.22.1.1 | Unsigned32 | RO | 32768 | |||||||||||||||||
scalar · Unsigned32 · read-only · current Maximum number of MAC addresses (total length of MAC table). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanMacTableUsed | 1.3.6.1.4.1.1332.1.1.5.3.22.1.2 | Unsigned32 | RO | 5 | |||||||||||||||||
scalar · Unsigned32 · read-only · current Number of entries in MAC table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanMacTableCAMTable | 1.3.6.1.4.1.1332.1.1.5.3.22.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMacTableCAMEntry | 1.3.6.1.4.1.1332.1.1.5.3.22.2.1 | NA | |||||||||||||||||||
| CmsanMacTableCAMIndex | 1.3.6.1.4.1.1332.1.1.5.3.22.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Id of the CAM entry. | |||||||||||||||||||||
| CmsanMacTableMacAddress | 1.3.6.1.4.1.1332.1.1.5.3.22.2.1.2 | MacAddress | RO | 00:d0:50:12:0d:26 | |||||||||||||||||
column · MacAddress · read-only · current MAC address of the CAM entry. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanMacTablePort | 1.3.6.1.4.1.1332.1.1.5.3.22.2.1.3 | Integer32 | RO | 9239 | |||||||||||||||||
column · Integer32 · read-only · current The port on which MAC address was learned or defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanMacTableVLAN | 1.3.6.1.4.1.1332.1.1.5.3.22.2.1.4 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current VLAN id of the learned or defined MAC address. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanMacTableType | 1.3.6.1.4.1.1332.1.1.5.3.22.2.1.5 | INTEGER | RO | static(3) | |||||||||||||||||
column · INTEGER · read-only · current Type of the MAC address.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanAcs | 1.3.6.1.4.1.1332.1.1.5.3.23 | ||||||||||||||||||||
| NmsanAcsGlobal | 1.3.6.1.4.1.1332.1.1.5.3.23.1 | ||||||||||||||||||||
| SmsanAcsServerUrl | 1.3.6.1.4.1.1332.1.1.5.3.23.1.1 | OCTET STRING | RW | 0.0.0.0 | |||||||||||||||||
scalar · OCTET STRING · read-write · current This is URL of the ACS server in form: <http|https>://<IP>|<hostname>[:<port>]/[<path>/] If hostname is used, msanDnsIpAddress and msanAcsDomainName must also be set. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanPrimaryDnsIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.23.1.2 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current This specifies the primary DNS server IP . Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanSecondaryDnsIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.23.1.3 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current This specifies the secondary DNS server IP . Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanAcsDomainName | 1.3.6.1.4.1.1332.1.1.5.3.23.1.4 | OCTET STRING | RW | | |||||||||||||||||
scalar · OCTET STRING · read-write · current Domain name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanAcsClientStatus | 1.3.6.1.4.1.1332.1.1.5.3.23.1.5 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current ACS client administrative status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanAcsBackupConf | 1.3.6.1.4.1.1332.1.1.5.3.23.1.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Back up configuration (as CLI script) to ACS server.
| |||||||||||||||||||||
| NmsanStp | 1.3.6.1.4.1.1332.1.1.5.3.24 | ||||||||||||||||||||
| NmsanStpGlobal | 1.3.6.1.4.1.1332.1.1.5.3.24.1 | ||||||||||||||||||||
| TmsanStpBpduFilterTable | 1.3.6.1.4.1.1332.1.1.5.3.24.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanStpBpduFilterEntry | 1.3.6.1.4.1.1332.1.1.5.3.24.2.1 | NA | |||||||||||||||||||
| CmsanStpBpduFilter | 1.3.6.1.4.1.1332.1.1.5.3.24.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Defines how BPDU packets are handled in case stp_port_state is disabled. 0 disable - If stp_port_state is disabled on interface, forward all BPDUs unchanged to all other interfaces that also have stp_port_state disabled. 1 enable - If stp_port_state is disabled on interface, drop all BPDUs received on the interface.
| |||||||||||||||||||||
| NmsanStpSwitchConfigGroup | 1.3.6.1.4.1.1332.1.1.5.3.24.3 | ||||||||||||||||||||
| SmsanStpCstBridgePriority | 1.3.6.1.4.1.1332.1.1.5.3.24.3.1 | Unsigned32 (0..61440) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..61440) · read-write · current The CSTP bridge priority in instance 0. The priority is in the increments of 4096. The recommended default value is 32768. | |||||||||||||||||||||
| TmsanStpMstTable | 1.3.6.1.4.1.1332.1.1.5.3.24.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanStpMstEntry | 1.3.6.1.4.1.1332.1.1.5.3.24.4.1 | NA | |||||||||||||||||||
| CmsanStpMstId | 1.3.6.1.4.1.1332.1.1.5.3.24.4.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current The MSTP instance ID. Instance 0 is not shown. | |||||||||||||||||||||
| CmsanStpMstBridgePriority | 1.3.6.1.4.1.1332.1.1.5.3.24.4.1.2 | Unsigned32 (0..61440) | RC | ||||||||||||||||||
column · Unsigned32 (0..61440) · read-create · current The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768. | |||||||||||||||||||||
| CmsanStpMstRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.24.4.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The MSTP instance status. Instance 0 is not shown. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance. | |||||||||||||||||||||
| TmsanStpMstVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.24.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanStpMstVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.24.5.1 | NA | |||||||||||||||||||
| CmsanStpMstVlanRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.24.5.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The association status of an MSTP instance and a VLAN. Instance 0 is not shown. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN. | |||||||||||||||||||||
| TmsanStpMstPortTable | 1.3.6.1.4.1.1332.1.1.5.3.24.6 | NA | |||||||||||||||||||
table · not-accessible · current MST port table. | |||||||||||||||||||||
| RmsanStpMstPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.24.6.1 | NA | |||||||||||||||||||
| CmsanStpMstPortPathCost | 1.3.6.1.4.1.1332.1.1.5.3.24.6.1.1 | Unsigned32 (0..200000000) | RW | ||||||||||||||||||
column · Unsigned32 (0..200000000) · read-write · current The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed. Instance 0 is not shown. | |||||||||||||||||||||
| CmsanStpMstPortPriority | 1.3.6.1.4.1.1332.1.1.5.3.24.6.1.2 | Unsigned32 (0..240) | RW | ||||||||||||||||||
column · Unsigned32 (0..240) · read-write · current The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128. Instance 0 is not shown. | |||||||||||||||||||||
| TmsanStpPortTable | 1.3.6.1.4.1.1332.1.1.5.3.24.7 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanStpPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.24.7.1 | NA | |||||||||||||||||||
| CmsanStpPortHelloTime | 1.3.6.1.4.1.1332.1.1.5.3.24.7.1.1 | Integer32 (0..10) | RW | ||||||||||||||||||
column · Integer32 (0..10) · read-write · current Hello time for the STP port. The default value is 0 (Not configured). | |||||||||||||||||||||
| TmsanStpCstPortTable | 1.3.6.1.4.1.1332.1.1.5.3.24.8 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanStpCstPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.24.8.1 | NA | |||||||||||||||||||
| CmsanStpCstPortPathCost | 1.3.6.1.4.1.1332.1.1.5.3.24.8.1.1 | Unsigned32 (0..200000000) | RW | ||||||||||||||||||
column · Unsigned32 (0..200000000) · read-write · current The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed. | |||||||||||||||||||||
| CmsanStpCstExtPortPathCost | 1.3.6.1.4.1.1332.1.1.5.3.24.8.1.2 | Unsigned32 (0..200000000) | RW | ||||||||||||||||||
column · Unsigned32 (0..200000000) · read-write · current The MSTP external port path cost in CIST. The default value varies depending upon the link speed. | |||||||||||||||||||||
| NmsanAuthentication | 1.3.6.1.4.1.1332.1.1.5.3.25 | ||||||||||||||||||||
| NmsanAuthenticationGlobal | 1.3.6.1.4.1.1332.1.1.5.3.25.1 | ||||||||||||||||||||
| SmsanAuthenticationListCreate | 1.3.6.1.4.1.1332.1.1.5.3.25.2 | DisplayString (SIZE (1..15)) | RW | deprecated | |||||||||||||||||
scalar · DisplayString (SIZE (1..15)) · read-write · deprecated Authentication List Create If set to a non empty string, creates a new Authentication List for configuration. | |||||||||||||||||||||
| TmsanAuthenticationListTable | 1.3.6.1.4.1.1332.1.1.5.3.25.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanAuthenticationListEntry | 1.3.6.1.4.1.1332.1.1.5.3.25.3.1 | NA | |||||||||||||||||||
| CmsanAuthenticationListName | 1.3.6.1.4.1.1332.1.1.5.3.25.3.1.1 | DisplayString (SIZE (1..15)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..15)) · not-accessible · current Authenticaiton List Name Unique name used to identify the Authentication List from other tables. | |||||||||||||||||||||
| CmsanAuthenticationListMethod1 | 1.3.6.1.4.1.1332.1.1.5.3.25.3.1.2 | INTEGER | RC | local(1) | |||||||||||||||||
column · INTEGER · read-create · current Authenticion List Method 1 Configures the first authentication method to use when this list is specified.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAuthenticationListMethod2 | 1.3.6.1.4.1.1332.1.1.5.3.25.3.1.3 | INTEGER | RC | undefined(1) | |||||||||||||||||
column · INTEGER · read-create · current Authenticion List Method 2 Configures the second authentication method to use when this list is specified.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAuthenticationListMethod3 | 1.3.6.1.4.1.1332.1.1.5.3.25.3.1.4 | INTEGER | RC | undefined(1) | |||||||||||||||||
column · INTEGER · read-create · current Authenticion List Method 3 Configures the third authentication method to use when this list is specified.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAuthenticationListStatus | 1.3.6.1.4.1.1332.1.1.5.3.25.3.1.5 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List createAndGo (4) destroy(6) - removes the Authentication List. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanPortSecurity | 1.3.6.1.4.1.1332.1.1.5.3.26 | ||||||||||||||||||||
| NmsanPortSecurityGlobal | 1.3.6.1.4.1.1332.1.1.5.3.26.1 | ||||||||||||||||||||
| TmsanPortSecurityStatMacTable | 1.3.6.1.4.1.1332.1.1.5.3.26.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortSecurityStatMacEntry | 1.3.6.1.4.1.1332.1.1.5.3.26.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanPortSecurityStatMacIf | 1.3.6.1.4.1.1332.1.1.5.3.26.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Unique numerical identification of the interface. | |||||||||||||||||||||
| CmsanPortSecurityStatMacVlanId | 1.3.6.1.4.1.1332.1.1.5.3.26.2.1.2 | INTEGER (1..4094) | NA | ||||||||||||||||||
column · INTEGER (1..4094) · not-accessible · current VLAN identification. | |||||||||||||||||||||
| CmsanPortSecurityStatMacMacAddress | 1.3.6.1.4.1.1332.1.1.5.3.26.2.1.3 | MacAddress | NA | ||||||||||||||||||
column · MacAddress · not-accessible · current Statically locked MAC addresses for port. | |||||||||||||||||||||
| CmsanPortSecurityStatMacRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.26.2.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanPortSecurityPortVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.26.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortSecurityPortVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.26.3.1 | NA | |||||||||||||||||||
| CmsanPortSecurityPortVlanDynamicLimit | 1.3.6.1.4.1.1332.1.1.5.3.26.3.1.1 | Integer32 (1..64) | RW | ||||||||||||||||||
column · Integer32 (1..64) · read-write · current The limit of dynamically learned MAC addresses per vlan on selected port. | |||||||||||||||||||||
| CmsanPortSecurityPortVlanRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.26.3.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| NmsanLag | 1.3.6.1.4.1.1332.1.1.5.3.27 | ||||||||||||||||||||
| NmsanLagGlobal | 1.3.6.1.4.1.1332.1.1.5.3.27.1 | ||||||||||||||||||||
| TmsanLagDetailedConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.27.2 | NA | |||||||||||||||||||
table · not-accessible · current A detailed table of the switch's LAG config entries. | |||||||||||||||||||||
| RmsanLagDetailedConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.27.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Switch's LAG config entry | |||||||||||||||||||||
| CmsanLagDetailedLagIndex | 1.3.6.1.4.1.1332.1.1.5.3.27.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current LAG index | |||||||||||||||||||||
| CmsanLagDetailedIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.27.2.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current LAG port index | |||||||||||||||||||||
| CmsanLagDetailedPortSpeed | 1.3.6.1.4.1.1332.1.1.5.3.27.2.1.3 | OBJECT IDENTIFIER | RC | 0.0 | |||||||||||||||||
column · OBJECT IDENTIFIER · read-create · current LAG port speed. See agentPortType for a description and list of valid values. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanLagDetailedPortStatus | 1.3.6.1.4.1.1332.1.1.5.3.27.2.1.4 | INTEGER | RO | inactive(2) | |||||||||||||||||
column · INTEGER · read-only · current LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanLagDetailedRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.27.2.1.5 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanLagTable | 1.3.6.1.4.1.1332.1.1.5.3.27.3 | NA | |||||||||||||||||||
table · not-accessible · current Config table of additional LAG parameters. | |||||||||||||||||||||
| RmsanLagEntry | 1.3.6.1.4.1.1332.1.1.5.3.27.3.1 | NA | |||||||||||||||||||
| CmsanLagIndex | 1.3.6.1.4.1.1332.1.1.5.3.27.3.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current LAG index. Value corresponds to ifIndex for LAG interfaces in ifTable. | |||||||||||||||||||||
| CmsanLagMaxFrameSize | 1.3.6.1.4.1.1332.1.1.5.3.27.3.1.2 | Integer32 | RW | 1500 | |||||||||||||||||
column · Integer32 · read-write · current This object identifies the currently configured maximum frame size value for this LAG interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanLagDVlanTagMode | 1.3.6.1.4.1.1332.1.1.5.3.27.3.1.3 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Controls the Double Vlan Tag mode on this LAG interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanRadiusServer | 1.3.6.1.4.1.1332.1.1.5.3.28 | ||||||||||||||||||||
| NmsanRadiusServerGlobal | 1.3.6.1.4.1.1332.1.1.5.3.28.1 | ||||||||||||||||||||
| TmsanRadiusServerConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.28.2 | NA | |||||||||||||||||||
table · not-accessible · current Table with information about Radius Authentication Server IP Addresses, port numbers and shared secret | |||||||||||||||||||||
| RmsanRadiusServerConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.28.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry consisting of configuration data for a Radius Authentication Server. | |||||||||||||||||||||
| CmsanRadiusServerAddress | 1.3.6.1.4.1.1332.1.1.5.3.28.2.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current IP Address of the configured RADIUS server. This object cannot be changed after creation. | |||||||||||||||||||||
| CmsanRadiusServerPort | 1.3.6.1.4.1.1332.1.1.5.3.28.2.1.2 | Unsigned32 (0..65535) | RW | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Port number for the RADIUS server. | |||||||||||||||||||||
| CmsanRadiusServerSecret | 1.3.6.1.4.1.1332.1.1.5.3.28.2.1.3 | DisplayString (SIZE (0..20)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..20)) · read-write · current Configured shared sercret for the RADIUS server. | |||||||||||||||||||||
| CmsanRadiusServerPrimaryMode | 1.3.6.1.4.1.1332.1.1.5.3.28.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set Primary.
| |||||||||||||||||||||
| CmsanRadiusServerCurrentMode | 1.3.6.1.4.1.1332.1.1.5.3.28.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicate if the RADIUS server is the current server in user for authentication.
| |||||||||||||||||||||
| CmsanRadiusServerMsgAuth | 1.3.6.1.4.1.1332.1.1.5.3.28.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable or disable the message authenticator attribute for this RADIUS server.
| |||||||||||||||||||||
| CmsanRadiusServerStatus | 1.3.6.1.4.1.1332.1.1.5.3.28.2.1.7 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Creates or destroys a RADIUS Authentication server entry. active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry. | |||||||||||||||||||||
| NmsanNetwork | 1.3.6.1.4.1.1332.1.1.5.3.29 | ||||||||||||||||||||
| NmsanNetworkGlobal | 1.3.6.1.4.1.1332.1.1.5.3.29.1 | ||||||||||||||||||||
| SmsanNetworkIPAddress | 1.3.6.1.4.1.1332.1.1.5.3.29.1.1 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current The switch's network ip address Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanNetworkSubnetMask | 1.3.6.1.4.1.1332.1.1.5.3.29.1.2 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current The switch's network subnet mask Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanNetworkDefaultGateway | 1.3.6.1.4.1.1332.1.1.5.3.29.1.3 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current The switch's network default gateway Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanNetworkDhcpSrvIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.29.1.4 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current IP address of DHCP server used by DHCP client. | |||||||||||||||||||||
| SmsanNetworkDhcpSrvVendorSpecific | 1.3.6.1.4.1.1332.1.1.5.3.29.1.5 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current DHCP client uses only vendor specific DHCP servers (when client sends opt. 60 to server, it should return expected vendor specific value in opt. 43)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanNetworkDhcpClientLeaseObtained | 1.3.6.1.4.1.1332.1.1.5.3.29.1.6 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The date and time when DHCP lease was obtained. | |||||||||||||||||||||
| SmsanNetworkDhcpClientLeaseExpires | 1.3.6.1.4.1.1332.1.1.5.3.29.1.7 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The date and time for which the DHCP lease is valid. | |||||||||||||||||||||
| SmsanNetworkDhcpClientLocalOpt82 | 1.3.6.1.4.1.1332.1.1.5.3.29.1.8 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current DHCP client adds relay agent information option into its own outgoing frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanNetworkDhcpClientVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.29.2 | NA | |||||||||||||||||||
table · not-accessible · current DHCP client configuration per vlan id. | |||||||||||||||||||||
| RmsanNetworkDhcpClientVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.29.2.1 | NA | |||||||||||||||||||
| CmsanNetworkDhcpClientVlanLocalOpt82 | 1.3.6.1.4.1.1332.1.1.5.3.29.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current DHCP client on specified vlan adds relay agent information option into its own outgoing frames.
| |||||||||||||||||||||
| NmsanStormControl | 1.3.6.1.4.1.1332.1.1.5.3.30 | ||||||||||||||||||||
| NmsanStormControlGlobal | 1.3.6.1.4.1.1332.1.1.5.3.30.1 | ||||||||||||||||||||
| TmsanPortStormControlTable | 1.3.6.1.4.1.1332.1.1.5.3.30.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortStormControlEntry | 1.3.6.1.4.1.1332.1.1.5.3.30.2.1 | NA | |||||||||||||||||||
| CmsanPortBroadcastControlMode | 1.3.6.1.4.1.1332.1.1.5.3.30.2.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current he switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortBroadcastControlThreshold | 1.3.6.1.4.1.1332.1.1.5.3.30.2.1.2 | Integer32 | RW | 100 | |||||||||||||||||
column · Integer32 · read-write · current Specify the data rate at which broadcast storm control activates (packets per second)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortMulticastControlMode | 1.3.6.1.4.1.1332.1.1.5.3.30.2.1.3 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortMulticastControlThreshold | 1.3.6.1.4.1.1332.1.1.5.3.30.2.1.4 | Integer32 | RW | 100 | |||||||||||||||||
column · Integer32 · read-write · current Specify the data rate at which multicast storm control activates (packets per second)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortUnicastControlMode | 1.3.6.1.4.1.1332.1.1.5.3.30.2.1.5 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortUnicastControlThreshold | 1.3.6.1.4.1.1332.1.1.5.3.30.2.1.6 | Integer32 | RW | 100 | |||||||||||||||||
column · Integer32 · read-write · current Specify the data rate at which unicast storm control activates (packets per second)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanUserConfig | 1.3.6.1.4.1.1332.1.1.5.3.31 | ||||||||||||||||||||
| NmsanUserConfigGlobal | 1.3.6.1.4.1.1332.1.1.5.3.31.1 | ||||||||||||||||||||
| SmsanUserConfigCheckPassword | 1.3.6.1.4.1.1332.1.1.5.3.31.1.1 | OCTET STRING (SIZE (0..255)) | RW | | |||||||||||||||||
scalar · OCTET STRING (SIZE (0..255)) · read-write · current Parameter is used to check user's password. String must be written in next format: user_name password First blank space is used as delimeter between user_name and password. If password is ok and user has write permission, noError(0) code is returned. If password is ok but user has only read permission, noAccess(6) error code is returned. If password is not valid or user is not configured, inconsistentValue(12) error code is returned. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanUserConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.31.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanUserConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.31.2.1 | NA | |||||||||||||||||||
| CmsanUserIndex | 1.3.6.1.4.1.1332.1.1.5.3.31.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current User Config Index | |||||||||||||||||||||
| CmsanUserAccessMode | 1.3.6.1.4.1.1332.1.1.5.3.31.2.1.2 | INTEGER | RW | write(2) | |||||||||||||||||
column · INTEGER · read-write · current User Access Mode
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanSfp | 1.3.6.1.4.1.1332.1.1.5.3.32 | ||||||||||||||||||||
| NmsanSfpGlobal | 1.3.6.1.4.1.1332.1.1.5.3.32.1 | ||||||||||||||||||||
| TmsanSfpInfoTable | 1.3.6.1.4.1.1332.1.1.5.3.32.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanSfpInfoEntry | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1 | NA | |||||||||||||||||||
| CmsanSfpInfoState | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.1 | INTEGER | RO | adminOff(1) | |||||||||||||||||
column · INTEGER · read-only · current Module state value on port. Ports which support SFP module are from 1 to 10 and from 15 to 28. State value adminOff means that specific port is administrative disabled and we can not read data from module on that port. Operational state means that SFP module is present and it works perfect. State operWithAl(operational with alarm) means that SFP module is present, but it works with internal alarms. Loss(Loss of signal) state means that SFP module is present but it have loss of signal. PresNoDiag(Present, no diagnostic) state means that SFP module is present but diagnostic is not supported. NotAvaliable state means that admin. mode of specific port has disabled value and SFP state is not avaliable. NotPresent state means that SFP module is not present.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoInterfaceType | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.2 | INTEGER | RO | ad(4) | |||||||||||||||||
column · INTEGER · read-only · current Transceiver(module) type. Module type can be SFP, NOT(mudule type is not SFP), NO(no module on port), AD(admin. disabled port) and XFP.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoNominalBitrate | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.3 | Integer32 | RO | -1 | |||||||||||||||||
column · Integer32 · read-only · current Module(SFP) nominal bitrate value measure in Mbit/s. If parameter is not available, value -1 is used. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoNominalRange | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.4 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Module(SFP) nominal range value. Nominal range value can support five different link lengths. Link length value and nominal range units are defined depends on value of nominal range. We can get link length value which can support 9/125 um fiber and nominal range measure in km units. We can get link length value which can support 9/125 um fiber and nominal range measure in 100m units. We can get link length value which can support 50/125 um fiber and nominal range measure in 10m units. We can get link length value which can support 62,5/125 um fiber and nominal range measure in 10m units. We can get link length value which can support cooper and nominal range measure in m units. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoVendor | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.5 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Module(SFP) vendor name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoIeeeVendorId | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.6 | Integer32 | RO | -1 | |||||||||||||||||
column · Integer32 · read-only · current Module(SFP) vendor IEEE company ID. If parameter is not available, value -1 is used. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoPartNr | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.7 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Module(SFP) part number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoRevisionNr | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.8 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Module(SFP) revision number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoSerialNr | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.9 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Module(SFP) serial number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoManufacturingDate | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.10 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Module(SFP) manufacturing date. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoWavelength | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.11 | Integer32 | RO | -1 | |||||||||||||||||
column · Integer32 · read-only · current Module(SFP) laser wavelength measure in nanometers. If parameter is not available, value -1 is used. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoVendorPN | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.12 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current Module(SFP) vendor Part Number Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpInfoSfpType | 1.3.6.1.4.1.1332.1.1.5.3.32.2.1.13 | INTEGER | RO | Undefined(5) | |||||||||||||||||
column · INTEGER · read-only · current SFP Type
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanSfpDiagnosticsTable | 1.3.6.1.4.1.1332.1.1.5.3.32.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanSfpDiagnosticsEntry | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1 | NA | |||||||||||||||||||
| CmsanSfpDiagnosticsSignal | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.1 | INTEGER | RO | ok(2) | |||||||||||||||||
column · INTEGER · read-only · current Module(SFP) signal value. If diagnostic for SFP module is supported than value can be OK(signal is ok) or loss(loss of signal), in the other case the value is set on notSupported becouse diagnostic is not supported(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTempCurrent | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.2 | Integer32 | RO | 23 | |||||||||||||||||
column · Integer32 · read-only · current Current SFP module temperature value in [deg C]. If diagnostic is not supported for SFP module then current temperature is set on not supported value(-129). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTempMin | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.3 | Integer32 | RO | -15 | |||||||||||||||||
column · Integer32 · read-only · current SFP module minimum temperature threshold limit in [deg C]. If diagnostic is not supported for SFP module then minimum temperature threshold limit is set on not supported value(-129). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTempMax | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.4 | Integer32 | RO | 85 | |||||||||||||||||
column · Integer32 · read-only · current SFP module maximum temperature threshold limit in [deg C]. If diagnostic is not supported for SFP module then maximum temperature threshold limit is set on not supported value(-129). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsVoltageCurrent | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.6 | Integer32 | RO | 327 | |||||||||||||||||
column · Integer32 · read-only · current Current SFP module supply voltage value in [V]. If diagnostic is not supported for SFP module then current supply voltage is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsVoltageMin | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.7 | Integer32 | RO | 297 | |||||||||||||||||
column · Integer32 · read-only · current SFP module minimum supply voltage threshold limit in [V]. If diagnostic is not supported for SFP module then minimum supply voltage threshold limit is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsVoltageMax | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.8 | Integer32 | RO | 363 | |||||||||||||||||
column · Integer32 · read-only · current SFP module maximum supply voltage threshold limit in [V]. If diagnostic is not supported for SFP module then maximum supply voltage threshold limit is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxBiasCrrCurrent | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.9 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Current SFP module Tx Bias Current value in [mA]. If diagnostic is not supported for SFP module then current Tx Bias Current is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxBiasCrrMin | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.10 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current SFP module minimum Tx Bias Current threshold limit in [mA]. If diagnostic is not supported for SFP module then minimum Tx Bias Current threshold limit is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxBiasCrrMax | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.11 | Integer32 | RO | 9000 | |||||||||||||||||
column · Integer32 · read-only · current SFP module maximum Tx Bias Current threshold limit in [mA]. If diagnostic is not supported for SFP module then maximum Tx Bias Current threshold limit is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxPowerCurrent | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.12 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Current SFP module transmitted optical output power value in [mW]. If diagnostic is not supported for SFP module then current transmitted optical output power is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxPowerMin | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.13 | Integer32 | RO | 126 | |||||||||||||||||
column · Integer32 · read-only · current SFP module minimum transmitted optical output power threshold limit in [mW]. If diagnostic is not supported for SFP module then minimum transmitted optical output power is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxPowerMax | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.14 | Integer32 | RO | 655 | |||||||||||||||||
column · Integer32 · read-only · current SFP module maximum transmitted optical output power threshold limit in [mW]. If diagnostic is not supported for SFP module then maximum transmitted optical output power is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsRxPowerCurrent | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.15 | Integer32 | RO | -1 | |||||||||||||||||
column · Integer32 · read-only · current Current SFP module received optical input power value in [mW]. If diagnostic is not supported for SFP module then current received optical input power is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsRxPowerMin | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.16 | Integer32 | RO | -1 | |||||||||||||||||
column · Integer32 · read-only · current SFP module minimum received optical input power threshold limit in [mW]. If diagnostic is not supported for SFP module then minimum received optical input power is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsRxPowerMax | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.17 | Integer32 | RO | -1 | |||||||||||||||||
column · Integer32 · read-only · current SFP module maximum received optical input power threshold limit in [mW]. If diagnostic is not supported for SFP module then maximum received optical input power is set on not supported value(-1).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTempStatus | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.19 | INTEGER | RO | sfpDiagNoAlarm(1) | |||||||||||||||||
column · INTEGER · read-only · current Temperature alarm status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsVoltageStatus | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.20 | INTEGER | RO | sfpDiagNoAlarm(1) | |||||||||||||||||
column · INTEGER · read-only · current Voltage alarm status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxBiasStatus | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.21 | INTEGER | RO | sfpDiagNoAlarm(1) | |||||||||||||||||
column · INTEGER · read-only · current TX bias alarm status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxPowerStatus | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.22 | INTEGER | RO | sfpDiagNoAlarm(1) | |||||||||||||||||
column · INTEGER · read-only · current TX power alarm status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsRxPowerStatus | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.23 | INTEGER | RO | sfpDiagNoAlarm(1) | |||||||||||||||||
column · INTEGER · read-only · current RX power alarm status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsTxPowerCurrentDBm | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.24 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Current SFP module transmitted optical output power value in [dBM]. If diagnostic is not supported for SFP module then current transmitted optical input power is set on not supported value(-100000).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanSfpDiagnosticsRxPowerCurrentDBm | 1.3.6.1.4.1.1332.1.1.5.3.32.3.1.25 | Integer32 | RO | -100000 | |||||||||||||||||
column · Integer32 · read-only · current Current SFP module received optical input power value in [dBm]. If diagnostic is not supported for SFP module then current reveived optical input power is set on not supported value(-100000).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanMacSg | 1.3.6.1.4.1.1332.1.1.5.3.34 | ||||||||||||||||||||
| NmsanMacSgGlobal | 1.3.6.1.4.1.1332.1.1.5.3.34.1 | ||||||||||||||||||||
| SmsanMacSgStatus | 1.3.6.1.4.1.1332.1.1.5.3.34.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Administrative state of MAC Source Guard on the system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanMacSgPortTable | 1.3.6.1.4.1.1332.1.1.5.3.34.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMacSgPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.34.2.1 | NA | |||||||||||||||||||
| CmsanMacSgPortStatus | 1.3.6.1.4.1.1332.1.1.5.3.34.2.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Administrative state of MAC Source Guard on interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanMacSgPortViolationsCounter | 1.3.6.1.4.1.1332.1.1.5.3.34.2.1.2 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current MAC Source Guard Violations counter Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanErrorDisable | 1.3.6.1.4.1.1332.1.1.5.3.35 | ||||||||||||||||||||
| NmsanErrorDisableGlobal | 1.3.6.1.4.1.1332.1.1.5.3.35.1 | ||||||||||||||||||||
| SmsanErrorDisableInterval | 1.3.6.1.4.1.1332.1.1.5.3.35.1.1 | Integer32 | RW | 5 | |||||||||||||||||
scalar · Integer32 · read-write · current The interval in minutes that will pass since error-disabled interface will be enabled. This parameter has effect only if ErrorDisable Recovery is enabled.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanErrorDisableMacSgDetectionStatus | 1.3.6.1.4.1.1332.1.1.5.3.35.1.2 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Administrative state of ErrorDisable Detection for MAC Source Guard cause. If enabled, interface will be error-disabled when MAC Source Guard violation is detected.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanErrorDisableMacSgRecoveryStatus | 1.3.6.1.4.1.1332.1.1.5.3.35.1.3 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Administrative state of ErrorDisable Recovery for MAC Source Guard cause. If enabled, interface will be automatically recovered when error-disabled due to MAC Source Guard violation.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanErrorDisablePortTable | 1.3.6.1.4.1.1332.1.1.5.3.35.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanErrorDisablePortEntry | 1.3.6.1.4.1.1332.1.1.5.3.35.2.1 | NA | |||||||||||||||||||
| CmsanErrorDisablePortStatus | 1.3.6.1.4.1.1332.1.1.5.3.35.2.1.1 | INTEGER | RO | errorDisable(2) | |||||||||||||||||
column · INTEGER · read-only · current This parameter shows which interfaces are in errorDisable(2) recovery administrative state.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanErrorDisablePortCause | 1.3.6.1.4.1.1332.1.1.5.3.35.2.1.2 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Cause for errorDisable(2) status on interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanErrorDisablePortTimeLeft | 1.3.6.1.4.1.1332.1.1.5.3.35.2.1.3 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Time in seconds which defines how much time left for interface to stay in errorDisable(2) state.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanErrorDisablePortCounter | 1.3.6.1.4.1.1332.1.1.5.3.35.2.1.4 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The number of times the specified interface has been in errorDisable(2) state. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanAdsl | 1.3.6.1.4.1.1332.1.1.5.3.36 | ||||||||||||||||||||
| NmsanAdslGlobal | 1.3.6.1.4.1.1332.1.1.5.3.36.1 | ||||||||||||||||||||
| TmsanAdslAtucPhysExtnTable | 1.3.6.1.4.1.1332.1.1.5.3.36.2 | NA | |||||||||||||||||||
table · not-accessible · current This table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662. | |||||||||||||||||||||
| RmsanAdslAtucPhysExtnEntry | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the msanAdslAtucPhysExtnTable. The Table is indexed by ifIndex.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnOpState | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates the operational state of the ATU. Values include idle, handshake, training, etc.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnActualStd | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnBertError | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object indicates the No. of bit errors detected during BERT. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnTxAtmCellCounter | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object Provides transmit ATM cell counter. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnRxAtmCellCounter | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object Provides receive ATM cell counter. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnStartProgress | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object provides current detailed start up information to be used for debugging. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnIdleBertError | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of bit errors. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnIdleBertCells | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of idle cells. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnBertSync | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates if the Signal is in Sync or not.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnParametricTestResult | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the Result of the Parametric Test conducted on the Xcvr.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltInfoValid | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the information validity for the SELT operation conducted on the Xcvr.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltLoopLen | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Indicates the LOOP Length in Feet once when the SELT information is valid on the Xcvr. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltLoopEnd | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the loop is short or open once when the SELT information is valid on the Xcvr.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltLoopGauge | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the LOOP wire_gauge information once when the SELT information is valid on the Xcvr.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltUpShannonCap | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.15 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Indicates the LOOP Upstream Shannon Capacity (in bps) once when the SELT information is valid on the Xcvr. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltDownShannonCap | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.16 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Indicates the LOOP Downstream Shannon Capacity (in bps) once when the SELT information is valid on the Xcvr. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltInbandNoise | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.17 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current 512 values that indicate inband noise length in dBM/Hz, covering both bands from 0 to 1.1 MHz. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltTerminationResp | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.18 | OCTET STRING (SIZE (0..720)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..720)) · read-only · current 180 discrete values that indicate termination response magnitude from 0 to 18Kft. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltUpMgnAtRate | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.19 | OCTET STRING (SIZE (0..1200)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1200)) · read-only · current 300 values that indicate SNR margin in dB/10 at a particular rate are provided, at 100K increments, up to 15 Mbps. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSeltDownMgnAtRate | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.20 | OCTET STRING (SIZE (0..1200)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1200)) · read-only · current 300 values that indicate SNR margin in dB/10 at a particular rate are provided, at 100K increments, up to 15 Mbps. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDataBoostStatus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates whether DataBoost is utilized for the connection.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnTestArray | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.22 | OCTET STRING (SIZE (0..1024)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object indicates the Parametric Test Array. Every Four octets refer to one element in this array of octets. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnChanPerfCD | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.23 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state. (Not available for ADSL). | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnChanPerfBE | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.24 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL). | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltHLINSCus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.25 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus). | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltHLINpsus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.26 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltHLOGMTus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.27 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus). | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltHLOGpsus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.28 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltQLNMTus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.29 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus). | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltQLNpsus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.30 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current DELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltLastTxState | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.31 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus).
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnPMState | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.32 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Line Power Management State. (Not available for ADSL).
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnChanPerfCU | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.33 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL). | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnExtendedPsdStatus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.34 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Conexant parameter that indicates whether an extended upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnChipVersion | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.35 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Conexant parameter that indicates the DSP version number. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnPilotTone | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.36 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Conexant parameter that indicates the Pilot Tone Index. | |||||||||||||||||||||
| CmsanAdslAtucMSGds | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.37 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnPsdMaskMode | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.38 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Conexant parameter that indicates the actual Psd Mask currently being used.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltSNRMTus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.39 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the number of symbols used to measure the upstream SNR(f) values. (Not available for ADSL and ADSL2plus) | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnDeltCurrStatus | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.40 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This Conexant parameter indicates the current status of Atuc Line in DELT mode.
| |||||||||||||||||||||
| CmsanAdslAtucSATN | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.41 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the upstream signal attenuation (length = 4 bytes). (Not available for ADSL and ADSL2plus). For further details, Refer to Section 7.5.1.9 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSystemVendorId | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.42 | OCTET STRING (SIZE (0..9)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..9)) · read-only · current Indicates the Vendor ID as inserted by the ATU-C in the Overhead Messages(ADSL2). Typically identifies the ATU-C system integrator which usually refers to the vendor of the smallest field-replaceable unit. ATU-C System Vendor ID may not be the same as ATU-C Vendor ID. It is not available for ADSL. This is string of 8 octets containing 2 octet country code , 4 octet vendor id and 2 octet vendor revision number. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnSelfTestResult | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.43 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Defines the ATU-C selftest result. The most significant octet is: 00 hex if the self-test passed or 01 hex if the self-test failed. Interpretation of the other octets is vendor discretionary and can be interpreted in combination with G.994.1 and system Vendor IDs. For further details, refer to Section 7.4.9 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnG9941VendorId | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.44 | OCTET STRING (SIZE (0..9)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..9)) · read-only · current Indicates the Vendor ID as inserted by the ATU-C in the G.994.1 CL message. Typically identifies the vendor of the ATU-C G.994.1 functionality. This is string of 8 octets containing 2 octet country code , 4 octet vendor id and 2 octet vendor revision number. For further details, refer to Section 7.4.1 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnTsspsUs | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.45 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current This parameter provides the Upstream Transmit Spectrum Shaping parameter expressed as the set of break points exchanged during G994.1. Each breakpoint consists in a subcarrier index and the associated shaping parameter. Value of this parameter is in range 0 - 127, in multiples of -0.5 dB. 127 is a special value indicating the subcarrier is not transmitted. It is available only for ADSL2/ADSL2plus.For further details, Refer to Section 7.5.1.21.5 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnActPsdUs | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.46 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This parameter defines the average upstream transmit power spectrum density over the used subcarriers delivered by the ATU-C at the U-C reference point, at the instant of measurement. It's value ranges from -90 to 0, in 0.1 dB/Hz steps. It is available only for ADSL2/ADSL2plus. For further details, Refer to Section 7.5.1.14 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnGainspsUs | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.47 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current This parameter defines the upstream gains allocation table per subcarrier. It is an array of integer values in the 0 to 4093 range for subcarriers 0 to NSCus-1. The gain value is represented as a multiple of 1/512 on linear scale. It is supported for ADSL2/ADSl2plus only. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnStartBin | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.48 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This Gspan++ parameter indicates the start bin of the bit loading up array. | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnStartupErrorCode | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.49 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Conexant parameter which indicates the startup error code.
| |||||||||||||||||||||
| CmsanAdslAtucPhysExtnBitSwapCount | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.50 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This Conexant parameter indicates the bit swap count. It can read only in data mode | |||||||||||||||||||||
| CmsanAdslAtucPhysExtnModPhase | 1.3.6.1.4.1.1332.1.1.5.3.36.2.1.51 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Conexant parameter to monitor the status of MoD
| |||||||||||||||||||||
| TmsanAdslLineExtnTable | 1.3.6.1.4.1.1332.1.1.5.3.36.3 | NA | |||||||||||||||||||
table · not-accessible · current This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662. | |||||||||||||||||||||
| RmsanAdslLineExtnEntry | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the msanAdslLineExtnTable. The Table is indexed by ifIndex.
| |||||||||||||||||||||
| CmsanAdslLineExtnAction | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current this object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.
| |||||||||||||||||||||
| CmsanAdslLineExtnUtopiaL2RxAddr | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.2 | INTEGER (0..254) | RO | ||||||||||||||||||
column · INTEGER (0..254) · read-only · current This object indicates UTOPIA Level 2 Rx address for a line. | |||||||||||||||||||||
| CmsanAdslLineExtnUtopiaL2TxAddr | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.3 | INTEGER (0..254) | RO | ||||||||||||||||||
column · INTEGER (0..254) · read-only · current This object indicates UTOPIA Level 2 Tx address for a line. | |||||||||||||||||||||
| CmsanAdslLineExtnTransAtucCap | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current The transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.
| |||||||||||||||||||||
| CmsanAdslLineExtnTransAtucActual | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.5 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current The transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1.
| |||||||||||||||||||||
| CmsanAdslLineExtnClockType | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates parameter to set use of either crystal or oscillator.
| |||||||||||||||||||||
| CmsanAdslLineExtnLineDmtTrellis | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage.
| |||||||||||||||||||||
| CmsanAdslLineExtnTransAturCap | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.8 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current The transmission modes that the ATU-R is capable of supporting. The modes available are limited by the design of the equipment.
| |||||||||||||||||||||
| CmsanAdslLineExtnPMConfPMSF | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current PM-related parameter used by the ATU-C to force a change in the line state.(Not available for ADSL/ADSL2Plus).
| |||||||||||||||||||||
| CmsanAdslLineExtnDeltConfLDSF | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current DELT-related parameter used by the ATU-C to force the line into loop diagnostics mode.(Not available for ADSL and ADSL2plus).
| |||||||||||||||||||||
| CmsanAdslLineExtnTransAtucConfig | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.11 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.
| |||||||||||||||||||||
| CmsanAdslLineExtnAtucCurrOutputPwr | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This parameter indicates the measure of total output power transmitted by this ATU. The value of this parameter is dynamic and will also show the change in Tx power due to Power Management. For example, the value will decrease in L2 low power mode. This value can be negative | |||||||||||||||||||||
| CmsanAdslLineExtnAtucBinSNRMargin | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.13 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current This Conexant parameter is an array of upstream SNR Margin values in dB. Each array entry represents the SNR Margin value for particular sub carrier. | |||||||||||||||||||||
| CmsanAdslLineExtnUtopiaL2RxAddrSecond | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.14 | INTEGER (0..254) | RO | ||||||||||||||||||
column · INTEGER (0..254) · read-only · current Conexant parameter to set UTOPIA Level 2 Rx address for the secondary bearer channel in case of Dual Latency. | |||||||||||||||||||||
| CmsanAdslLineExtnUtopiaL2TxAddrSecond | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.15 | INTEGER (0..254) | RO | ||||||||||||||||||
column · INTEGER (0..254) · read-only · current Conexant parameter to set UTOPIA Level 2 Tx address for the secondary bearer channel in case of Dual Latency. | |||||||||||||||||||||
| CmsanAdslLineExtnDsBinSnrUpdate | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Conexant parameter to enable or disable collection of downstream SNR bin status
| |||||||||||||||||||||
| CmsanAdslLineExtnServiceType | 1.3.6.1.4.1.1332.1.1.5.3.36.3.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The service type configured in ADSL configuration profile which applies for this line. Supported values: 1: multimode 2: reserved 3: T1_413 4: G.DMT 6: ADSL2+ 7: ADSL2 8: ADSL2+ AUTO[+Annex M] 9: ADSL2 AUTO[+Annex M] 10: READSL2
| |||||||||||||||||||||
| TmsanAdslAturPhysExtnTable | 1.3.6.1.4.1.1332.1.1.5.3.36.4 | NA | |||||||||||||||||||
table · not-accessible · current This table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR. | |||||||||||||||||||||
| RmsanAdslAturPhysExtnEntry | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the msanAdslAturPhysExtnTable. The Table is indexed by ifIndex.
| |||||||||||||||||||||
| CmsanAdslAturPhysExtnConfig | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.1 | OCTET STRING (SIZE (0..30)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..30)) · read-only · current This object provides the upstream and downstream ATU-R configuration data, as defined in T1.413 i2, Sections 6.4, 6.6, 7.4, 7.6 and Table 27. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnChanPerfCD | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(Not available for ADSL). | |||||||||||||||||||||
| CmsanAdslAturPhysExtnChanPerfCU | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL). | |||||||||||||||||||||
| CmsanAdslAturPhysExtnChanPerfBE | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL). | |||||||||||||||||||||
| CmsanAdslAturPhysExtnDeltHLINSCds | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus). | |||||||||||||||||||||
| CmsanAdslAturPhysExtnDeltHLINpsds | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.6 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnDeltHLOGMTds | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus). | |||||||||||||||||||||
| CmsanAdslAturPhysExtnDeltHLOGpsus | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.8 | OCTET STRING (SIZE (0..1024)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1024)) · read-only · current DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). | |||||||||||||||||||||
| CmsanAdslAturPhysExtnDeltQLNMTds | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus). | |||||||||||||||||||||
| CmsanAdslAturPhysExtnDeltQLNpsds | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.10 | OCTET STRING (SIZE (0..512)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-only · current DELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnDeltLastTxState | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus).
| |||||||||||||||||||||
| CmsanAdslAturMSGus | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.12 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet. | |||||||||||||||||||||
| CmsanAdslAturDeltSNRMTds | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.13 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current DELT-related parameter that provides the number of symbols used to measure the downstream SNR(f) values. (Not available for ADSL and ADSL2plus) | |||||||||||||||||||||
| CmsanAdslAturSATN | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DELT-related parameter that provides the downtream signal attenuation (length = 4 bytes). (Not available for ADSL and ADSL2plus). For further details, Refer to Section 7.5.1.9 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnSystemVendorId | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.15 | OCTET STRING (SIZE (0..9)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..9)) · read-only · current Indicates the Vendor ID as inserted by the ATU-R in the Embedded Operations Channel(ADSL). Typically identiies the ATU-R system integrator which usually refers to the vendor of the smallest field-replaceable unit. ATU-R System Vendor ID may not be the same as ATU-R G.994.1 Vendor ID. For ADSL2, provides the Vendor ID as inserted by the ATU-R in the Overhead Messages. It is not available for ADSL. This is string of 8 octets containing 2 octet country code , 4 octet vendor id and 2 octet vendor revision number. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnGainspsDs | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.16 | OCTET STRING (SIZE (0..1024)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1024)) · read-only · current This parameter defines the downstream gains allocation table per bin. For further details, Refer to Section 7.5.1.21.3 Revised Recommendation G.997.1. It is supported for ADSL2/ADSl2plus only. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnSelfTestResult | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.17 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Defines the ATU-R selftest result. The most significant octet is: 00 hex if the self-test passed or 01 hex if the self-test failed. Interpretation of the other octets is vendor discretionary and can be interpreted in combination with G.994.1 and system Vendor IDs. For further details, refer to Section 7.4.10 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnG9941VendorId | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.18 | OCTET STRING (SIZE (0..9)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..9)) · read-only · current Indicates the Vendor ID as inserted by the ATU-R in the G.994.1 CLR message.The G.994.1 Vendor ID typically identifies the vendor of the ATU-R G.994.1 functionality. This is string of 8 octets containing 2 octet country code , 4 octet vendor id and 2 octet vendor revision number. For further details, refer to Section 7.4.2 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnTsspsDs | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.19 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current This parameter provides the Downstream Transmit Spectrum Shaping parameter expressed as the set of break points exchanged during G994.1. Value of this parameter is in range 0 - 127, in multiples of -0.5 dB. 127 is a special value indicating the subcarrier is not transmitted. It is available only for ADSL2/ADSL2plus. For further details, Refer to Section 7.5.1.21.5 Revised Recommendation G.997.1 | |||||||||||||||||||||
| CmsanAdslAturPhysExtnActPsdDs | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.20 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This parameter defines the average downstream transmit power spectrum density over the used subcarriers delivered by the ATU-C at the U-C reference point, at the instant of measurement. It's value ranges from -90 to 0, in 0.1 dB/Hz steps. It is available only for ADSL2/ADSL2plus.For further details, Refer to Section 7.5.1.14 Revised Recommendation G.997.1. | |||||||||||||||||||||
| CmsanAdslAturPhysExtnBitSwapCount | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.21 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This Conexant parameter indicates the bit swap count. It can read only in data mode | |||||||||||||||||||||
| CmsanAdslAturPhysExtnPsdMaskMode | 1.3.6.1.4.1.1332.1.1.5.3.36.4.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This conexant parameter that indicates the actual PSD Mask currently being used by ATU-R
| |||||||||||||||||||||
| NmsanEaps | 1.3.6.1.4.1.1332.1.1.5.3.37 | ||||||||||||||||||||
| NmsanEapsGlobal | 1.3.6.1.4.1.1332.1.1.5.3.37.1 | ||||||||||||||||||||
| SmsanEapsAdminState | 1.3.6.1.4.1.1332.1.1.5.3.37.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Global EAPS administrative state.
| |||||||||||||||||||||
| TmsanEapsDomainTable | 1.3.6.1.4.1.1332.1.1.5.3.37.2 | NA | |||||||||||||||||||
table · not-accessible · current EAPS domain configuration. | |||||||||||||||||||||
| RmsanEapsDomainEntry | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1 | NA | |||||||||||||||||||
| CmsanEapsDomainName | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.2 | OCTET STRING (SIZE (1..12)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..12)) · not-accessible · current Description of the EAPS domain. Each msanEapsDomainName value in this table must be unique. | |||||||||||||||||||||
| CmsanEapsDomainDeviceRole | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Role of the node in the EAPS domain (Master or Transit)
| |||||||||||||||||||||
| CmsanEapsDomainHelloTime | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.4 | INTEGER (1..15) | RW | ||||||||||||||||||
column · INTEGER (1..15) · read-write · current EAPS domain hello frame send interval. This value must be lower than msanEapsDomainFailTimeout | |||||||||||||||||||||
| CmsanEapsDomainFailTimeout | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.5 | INTEGER (2..300) | RW | ||||||||||||||||||
column · INTEGER (2..300) · read-write · current EAPS fail timeout. This value must be higher than msanEapsDomainHelloTime | |||||||||||||||||||||
| CmsanEapsDomainAdminState | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current EAPS domain administrative state. State can be changed from disable to enable only when all parameters in this table are defined.
| |||||||||||||||||||||
| CmsanEapsDomainPrimaryIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current EAPS primary interface. The value must be different from msanEapsSecondaryIfIndex. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. ifType of selected interface can be ethernetCsmacd(6) or ieee8023adLag (161). This parameter can be undefined when EAPS domain is created and msanEapsDomainAdminState is disable. | |||||||||||||||||||||
| CmsanEapsDomainSecondaryIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.8 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current EAPS secondary interface. The value must be different from msanEapsPrimaryIfIndex. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. ifType of selected interface can be ethernetCsmacd(6) or ieee8023adLag (161). This parameter can be undefined when EAPS domain is created and msanEapsDomainAdminState is disable. | |||||||||||||||||||||
| CmsanEapsDomainCntrlVlanId | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.9 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current EAPS control VLAN ID. Selected VLAN ID must exists in dot1qVlanStaticTable. This parameter can be undefined when EAPS domain is created and msanEapsDomainAdminState is disable. | |||||||||||||||||||||
| CmsanEapsDomainRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.37.2.1.10 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. If msanEapsDomainAdminState is disable, created row can be actived by row status object also when next parameters are not defined: - msanEapsDomainPrimaryifIndex - msanEapsDomainSecondaryifIndex - msanEapsDomainCntrlVlanId | |||||||||||||||||||||
| TmsanEapsDomainProtVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.37.3 | NA | |||||||||||||||||||
table · not-accessible · current List of protected VLANs for EAPS domain. | |||||||||||||||||||||
| RmsanEapsDomainProtVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.37.3.1 | NA | |||||||||||||||||||
| CmsanEapsDomainProtVlanRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.37.3.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanCpe | 1.3.6.1.4.1.1332.1.1.5.3.38 | ||||||||||||||||||||
| NmsanCpeGlobal | 1.3.6.1.4.1.1332.1.1.5.3.38.1 | ||||||||||||||||||||
| SmsanCpeReset | 1.3.6.1.4.1.1332.1.1.5.3.38.1.1 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current Reset CPE equipment connected to selected interface index (ifIndex).
| |||||||||||||||||||||
| SmsanCpeSendConfig | 1.3.6.1.4.1.1332.1.1.5.3.38.1.2 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current Apply configuration to CPE equipment connected to selected interface index (ifIndex).
| |||||||||||||||||||||
| SmsanCpeApiMajorVersion | 1.3.6.1.4.1.1332.1.1.5.3.38.1.3 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..32)) · read-only · current CPE API major version information. | |||||||||||||||||||||
| SmsanCpeApiMinorVersion | 1.3.6.1.4.1.1332.1.1.5.3.38.1.4 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..32)) · read-only · current CPE API minor version information. | |||||||||||||||||||||
| TmsanCpeTypeTable | 1.3.6.1.4.1.1332.1.1.5.3.38.2 | NA | |||||||||||||||||||
table · not-accessible · current List of possible CPE types. | |||||||||||||||||||||
| RmsanCpeTypeEntry | 1.3.6.1.4.1.1332.1.1.5.3.38.2.1 | NA | |||||||||||||||||||
| CmsanCpeTypeName | 1.3.6.1.4.1.1332.1.1.5.3.38.2.1.1 | OCTET STRING (SIZE (0..20)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · not-accessible · current Usage name of CPE model. | |||||||||||||||||||||
| CmsanCpeTypePortNum | 1.3.6.1.4.1.1332.1.1.5.3.38.2.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Number of CPE user ports. | |||||||||||||||||||||
| TmsanCpeIntfTypeTable | 1.3.6.1.4.1.1332.1.1.5.3.38.3 | NA | |||||||||||||||||||
table · not-accessible · current Tabel defines which CPE model can be connected to selected interface. | |||||||||||||||||||||
| RmsanCpeIntfTypeEntry | 1.3.6.1.4.1.1332.1.1.5.3.38.3.1 | NA | |||||||||||||||||||
| CmsanCpeIntfTypeRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.38.3.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| CmsanCpeIntfTypeHwVersion | 1.3.6.1.4.1.1332.1.1.5.3.38.3.1.2 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current Connected CPE hardware version. | |||||||||||||||||||||
| CmsanCpeIntfTypeSwVersion | 1.3.6.1.4.1.1332.1.1.5.3.38.3.1.3 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current Connected CPE software version. | |||||||||||||||||||||
| TmsanCpeIntfPortTable | 1.3.6.1.4.1.1332.1.1.5.3.38.4 | NA | |||||||||||||||||||
table · not-accessible · current Table of CPE ports parameters | |||||||||||||||||||||
| RmsanCpeIntfPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1 | NA | |||||||||||||||||||
| CmsanCpeIntfPortId | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current CPE port ID (1 .. n). | |||||||||||||||||||||
| CmsanCpeIntfPortPowerMode | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Power mode of the CPE port. When port is in Sleep(2) mode, automatic wake-up is also activated.
| |||||||||||||||||||||
| CmsanCpeIntfPortLinkMode | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Speed and duplex mode of the CPE port.
| |||||||||||||||||||||
| CmsanCpeIntfPortPvid | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.4 | INTEGER (1..4094) | RW | ||||||||||||||||||
column · INTEGER (1..4094) · read-write · current Default Vlan ID (pVID) for selected CPE port. | |||||||||||||||||||||
| CmsanCpeIntfPortCos | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.5 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current Default CoS bit settings for the CPE port. | |||||||||||||||||||||
| CmsanCpeIntfPortOverrideVid | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enable(1)VLAN ID of received tagged frame on selected CPE port is overwritten with default VLAN ID (msanCpeIntfPortPvid).
| |||||||||||||||||||||
| CmsanCpeIntfPortOverrideCos | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enable(1)CoS value of received tagged frame on selected CPE port is overwritten with default CoS bit settings (msanCpeIntfPortCos).
| |||||||||||||||||||||
| CmsanCpeIntfPortProtection | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanAclProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanCpeIntfPortStatus | 1.3.6.1.4.1.1332.1.1.5.3.38.4.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| TmsanCpeTrafficTable | 1.3.6.1.4.1.1332.1.1.5.3.38.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanCpeTrafficEntry | 1.3.6.1.4.1.1332.1.1.5.3.38.5.1 | NA | |||||||||||||||||||
| CmsanCpeTrafficId | 1.3.6.1.4.1.1332.1.1.5.3.38.5.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Number identifying traffic configuration (1 .. n). | |||||||||||||||||||||
| CmsanCpeTrafficName | 1.3.6.1.4.1.1332.1.1.5.3.38.5.1.2 | OCTET STRING (SIZE (0..40)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..40)) · read-write · current Name identifying traffic configuration. Must be unique value. | |||||||||||||||||||||
| CmsanCpeTrafficSpeed | 1.3.6.1.4.1.1332.1.1.5.3.38.5.1.3 | Integer32 (0..100000) | RW | ||||||||||||||||||
column · Integer32 (0..100000) · read-write · current Maximum bitrate of services using this traffic configuration. Domain value is 0-100000kbit/s, where: - for speeds below 1Mbit/s step is 64kbit/s - for speeds above 1Mbit/s step is 1000kbit/s
| |||||||||||||||||||||
| CmsanCpeTrafficFlowCntrlMode | 1.3.6.1.4.1.1332.1.1.5.3.38.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Flow control mode. When enable(1) and speed is to be exceeded, device will send PAUSE flow control packet. If disable(2) packet will be just dropped.
| |||||||||||||||||||||
| CmsanCpeTrafficRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.38.5.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. Setting this object to active(1) will activate this entry, if msanCpeTrafficName is defined. Setting this object to destroy(6) will remove this entry. | |||||||||||||||||||||
| CmsanCpeTrafficProtection | 1.3.6.1.4.1.1332.1.1.5.3.38.5.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanAclProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanCpeTrafficStatus | 1.3.6.1.4.1.1332.1.1.5.3.38.5.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| TmsanCpeServiceTable | 1.3.6.1.4.1.1332.1.1.5.3.38.6 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanCpeServiceEntry | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1 | NA | |||||||||||||||||||
| CmsanCpeServiceId | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Number identifying service configuration (0 .. n). | |||||||||||||||||||||
| CmsanCpeServiceName | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.2 | OCTET STRING (SIZE (0..40)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..40)) · read-write · current Name identifying service. Must be unique value. | |||||||||||||||||||||
| CmsanCpeServiceCVlanId | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.3 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current Customer VLAN ID, used for all frames belong to this service. | |||||||||||||||||||||
| CmsanCpeServiceCCos | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.4 | Integer32 (0..7) | RW | ||||||||||||||||||
column · Integer32 (0..7) · read-write · current CoS bit settings for all frames belonging to this service. | |||||||||||||||||||||
| CmsanCpeServiceTrafficId | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Reference to parameter msanCpeTrafficId (1 .. n), which identifies traffic configuration . Value 0 is used when traffic configuration is not defined. | |||||||||||||||||||||
| CmsanCpeServiceUntaggedPorts | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.6 | OCTET STRING (SIZE (0..2)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2)) · read-write · current The set of ports (bitmask) which should transmit egress packets as untagged. When untagged frame is received on this ports set, appropriate default VLAN ID (msanCpeIntfPortPvid) and default CoS bits (msanCpeIntfPortCos) are set. | |||||||||||||||||||||
| CmsanCpeServiceTaggedPorts | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.7 | OCTET STRING (SIZE (0..2)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2)) · read-write · current The set of ports (bitmask) where frames can be received only if they have appropriate Customer VLAN ID (msanCpeServiceCVlanId). Otherwise they are dropped. When transmitting frames to this set of ports, VLAN tags are not removed. | |||||||||||||||||||||
| CmsanCpeServiceCMltcstMode | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Mode of multicast operation for this service.
| |||||||||||||||||||||
| CmsanCpeServiceRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.9 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. Setting this object to active(1) will activate this entry, if msanCpeServiceName and msanCpeServiceTrafficId are defined. Setting this object to destroy(6) will remove this entry. | |||||||||||||||||||||
| CmsanCpeServiceTypeName | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.10 | OCTET STRING (SIZE (0..20)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · read-write · current Usage name of CPE model. Must be one of predefined msanCpeTypeName values. | |||||||||||||||||||||
| CmsanCpeServiceProtection | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanAclProfileStatus = dynamic(2)
| |||||||||||||||||||||
| CmsanCpeServiceStatus | 1.3.6.1.4.1.1332.1.1.5.3.38.6.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Profile status. If status is dynamic, profile values can't be edited.
| |||||||||||||||||||||
| TmsanCpeIntfServiceTable | 1.3.6.1.4.1.1332.1.1.5.3.38.7 | NA | |||||||||||||||||||
table · not-accessible · current This table links CPE ports on selected interface with appropriate service. | |||||||||||||||||||||
| RmsanCpeIntfServiceEntry | 1.3.6.1.4.1.1332.1.1.5.3.38.7.1 | NA | |||||||||||||||||||
| CmsanCpeIntfServiceRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.38.7.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanBoard | 1.3.6.1.4.1.1332.1.1.5.3.39 | ||||||||||||||||||||
| NmsanBoardGlobal | 1.3.6.1.4.1.1332.1.1.5.3.39.1 | ||||||||||||||||||||
| SmsanBoardReset | 1.3.6.1.4.1.1332.1.1.5.3.39.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Reset board in specified shelf slot ID (>0). | |||||||||||||||||||||
| TmsanBoardConfTable | 1.3.6.1.4.1.1332.1.1.5.3.39.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanBoardConfEntry | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1 | NA | |||||||||||||||||||
| CmsanBoardConfNr | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.1 | INTEGER (1..1000) | NA | ||||||||||||||||||
column · INTEGER (1..1000) · not-accessible · current Unique identification of a board. | |||||||||||||||||||||
| CmsanBoardConfParentNr | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.2 | INTEGER (1..1000) | RW | ||||||||||||||||||
column · INTEGER (1..1000) · read-write · current Unique identification of a parent board. | |||||||||||||||||||||
| CmsanBoardConfPosition | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.3 | INTEGER (1..1000) | RW | 1 | |||||||||||||||||
column · INTEGER (1..1000) · read-write · current Position of the board on the parent board. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfType | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.4 | DisplayString | RO | SPL | |||||||||||||||||
column · DisplayString · read-only · current Type of physical board (e.g. IDC, SGO, SFA, ...). This value is automatically set according to msanBoardConfRequiredId. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfRequiredId | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.5 | DisplayString | RW | ETN6166AA020 | |||||||||||||||||
column · DisplayString · read-write · current Required identification of a board, which is one of available msanBoardListId values (e.g. UTA6041BA). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfActualId | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.6 | DisplayString | RO | ETN6166AA020 | |||||||||||||||||
column · DisplayString · read-only · current Actual identification of a board (e.g. UTA6041BA050 - last three numbers define board version). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfSerialNr | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.7 | DisplayString | RO | ZLME00049G | |||||||||||||||||
column · DisplayString · read-only · current Serial number of a board. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfDescription | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.8 | DisplayString | RW | ISKRATEL Switching | |||||||||||||||||
column · DisplayString · read-write · current Description of the board. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfStatus | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.9 | INTEGER | RO | boardPresentRunning(1) | |||||||||||||||||
column · INTEGER · read-only · current Physical status of configured board.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.10 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deactivation use notInService(2). For row deletion use destroy(6) (board with management interface can not be deleted). Other values are currently not supported. For row activation next terms must be accomplished: - all requested values (they don't have default definition) must be set - msanBoardConfId is one of available msanBoardListId values Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfSwSteerVersion | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.11 | DisplayString | RO | AN9920CP_1.2.0.0.024 | |||||||||||||||||
column · DisplayString · read-only · current The unique steer code of installed software. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfSwBuildDirectory | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.12 | DisplayString | RO | n/a | |||||||||||||||||
column · DisplayString · read-only · current The directory where installed software was build on. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfSwBuildTime | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.13 | DisplayString | RO | Wed Sep 16 07:29:53 2026 | |||||||||||||||||
column · DisplayString · read-only · current The time when the installed software was built. (DateAndTime textual convention, from SNMPv2-TC) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfSwBranch | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.14 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The repository branch where the installed software was built from. | |||||||||||||||||||||
| CmsanBoardConfSwBuildReference | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.15 | DisplayString | RO | 0_0 | |||||||||||||||||
column · DisplayString · read-only · current The repository reference number of the installed software build branch. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfSwBackupSteerVersion | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.16 | DisplayString | RO | AN9920CP_1.1.0.0.019 | |||||||||||||||||
column · DisplayString · read-only · current The unique steer code of installed backup software. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanBoardConfSwBackupStatus | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup software package status
| |||||||||||||||||||||
| CmsanBoardConfPowerConsumption | 1.3.6.1.4.1.1332.1.1.5.3.39.2.1.18 | Gauge32 | RO | 4049 | |||||||||||||||||
column · Gauge32 · read-only · current Measured usage power expressed in Watts.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanBoardListTable | 1.3.6.1.4.1.1332.1.1.5.3.39.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanBoardListEntry | 1.3.6.1.4.1.1332.1.1.5.3.39.3.1 | NA | |||||||||||||||||||
| CmsanBoardListId | 1.3.6.1.4.1.1332.1.1.5.3.39.3.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Identification of supported board (e.g. UTA6041BA). | |||||||||||||||||||||
| CmsanBoardListType | 1.3.6.1.4.1.1332.1.1.5.3.39.3.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Type of physical board (e.g. IDC, SGO, SFA, ...). | |||||||||||||||||||||
| NmsanFtpServer | 1.3.6.1.4.1.1332.1.1.5.3.40 | ||||||||||||||||||||
| NmsanFtpServerGlobal | 1.3.6.1.4.1.1332.1.1.5.3.40.1 | ||||||||||||||||||||
| SmsanFtpServerAdminState | 1.3.6.1.4.1.1332.1.1.5.3.40.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current FTP server administrative state.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanAppRateLimit | 1.3.6.1.4.1.1332.1.1.5.3.41 | ||||||||||||||||||||
| NmsanAppRateLimitGlobal | 1.3.6.1.4.1.1332.1.1.5.3.41.1 | ||||||||||||||||||||
| TmsanAppRateLimitTable | 1.3.6.1.4.1.1332.1.1.5.3.41.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanAppRateLimitEntry | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1 | NA | |||||||||||||||||||
| CmsanAppRateLimitDhcp | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.1 | Integer32 (0..1000) | RW | 5 | |||||||||||||||||
column · Integer32 (0..1000) · read-write · current Maximum number of received DHCP packets in one second (pps) per interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitDhcpState | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.2 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Administrative state of DHCP traffic rate limiting.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitPppoe | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.3 | Integer32 (0..1000) | RW | 5 | |||||||||||||||||
column · Integer32 (0..1000) · read-write · current Maximum number of received PPPoE packets in one second (pps) per interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitPppoeState | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.4 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Administrative state of PPPoE traffic rate limiting.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitIgmp | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.5 | Integer32 (0..1000) | RW | 5 | |||||||||||||||||
column · Integer32 (0..1000) · read-write · current Maximum number of received DHCP packets in one second (pps) per interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitIgmpState | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.6 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Administrative state of IGMP traffic rate limiting.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitStp | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.7 | Integer32 (0..1000) | RW | 5 | |||||||||||||||||
column · Integer32 (0..1000) · read-write · current Maximum number of received STP packets in one second (pps) per interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitStpState | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.8 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Administrative state of STP traffic rate limiting.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitMn | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.9 | Integer32 (0..1000) | RW | 1000 | |||||||||||||||||
column · Integer32 (0..1000) · read-write · current Maximum number of received MN packets (management traffic) in one second (pps) per interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanAppRateLimitMnState | 1.3.6.1.4.1.1332.1.1.5.3.41.2.1.10 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Administrative state of MN traffic rate limiting.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanMlinec | 1.3.6.1.4.1.1332.1.1.5.3.50 | ||||||||||||||||||||
| NmsanMlinecGlobal | 1.3.6.1.4.1.1332.1.1.5.3.50.1 | ||||||||||||||||||||
| SmsanMlinecAdminState | 1.3.6.1.4.1.1332.1.1.5.3.50.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current MLINEC (Multi-Link Network Connectivity) administrative state.
| |||||||||||||||||||||
| NmsanMulticast | 1.3.6.1.4.1.1332.1.1.5.3.100 | ||||||||||||||||||||
| NmsanMulticastGlobal | 1.3.6.1.4.1.1332.1.1.5.3.100.1 | ||||||||||||||||||||
| TmsanMulticastIntfStaticGroupTable | 1.3.6.1.4.1.1332.1.1.5.3.100.2 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The table attaches static multicast groups to the interfaces. | |||||||||||||||||||||
| RmsanMulticastIntfStaticGroupEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.2.1 | NA | deprecated | ||||||||||||||||||
| CmsanMulticastIntfStaticGroupIPAddr | 1.3.6.1.4.1.1332.1.1.5.3.100.2.1.1 | IpAddress | NA | deprecated | |||||||||||||||||
column · IpAddress · not-accessible · deprecated IP multicast address of valid multicast group. | |||||||||||||||||||||
| CmsanMulticastIntfStaticGroupRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.2.1.2 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMulticastGroupTable | 1.3.6.1.4.1.1332.1.1.5.3.100.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMulticastGroupEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.3.1 | NA | |||||||||||||||||||
| CmsanMulticastGroupIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.100.3.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current IP multicast address of valid multicast group. | |||||||||||||||||||||
| CmsanMulticastGroupName | 1.3.6.1.4.1.1332.1.1.5.3.100.3.1.2 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current Name of multicast group. | |||||||||||||||||||||
| CmsanMulticastGroupRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.3.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. | |||||||||||||||||||||
| TmsanMulticastAclListTable | 1.3.6.1.4.1.1332.1.1.5.3.100.4 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The table below assigns the symbolic names to the specific multicast ACLs. | |||||||||||||||||||||
| RmsanMulticastAclListEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.4.1 | NA | deprecated | ||||||||||||||||||
| CmsanMulticastAclListId | 1.3.6.1.4.1.1332.1.1.5.3.100.4.1.1 | INTEGER (0..255) | NA | deprecated | |||||||||||||||||
column · INTEGER (0..255) · not-accessible · deprecated Multicast List id. Integer from 0 to 255. | |||||||||||||||||||||
| CmsanMulticastAclListName | 1.3.6.1.4.1.1332.1.1.5.3.100.4.1.2 | SnmpAdminString | RW | deprecated | |||||||||||||||||
column · SnmpAdminString · read-write · deprecated ACL list symbolic name. Should be unique. | |||||||||||||||||||||
| CmsanMulticastAclListRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.4.1.3 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMulticastAclListGroupTable | 1.3.6.1.4.1.1332.1.1.5.3.100.5 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The table below links the multicast groups to the ACL. | |||||||||||||||||||||
| RmsanMulticastAclListGroupEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.5.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated Description. | |||||||||||||||||||||
| CmsanMulticastAclGroupIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.100.5.1.1 | IpAddress | NA | deprecated | |||||||||||||||||
column · IpAddress · not-accessible · deprecated IP multicast address of valid ACL multicast group. | |||||||||||||||||||||
| CmsanMulticastAclListGroupRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.5.1.2 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMulticastAclIntfListTable | 1.3.6.1.4.1.1332.1.1.5.3.100.6 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The table below assigns the multicast ACL to the interfaces | |||||||||||||||||||||
| RmsanMulticastAclIntfListEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.6.1 | NA | deprecated | ||||||||||||||||||
| CmsanMulticastAclIntfListMode | 1.3.6.1.4.1.1332.1.1.5.3.100.6.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Defines the mode in which interface for specified ACL list works.
| |||||||||||||||||||||
| CmsanMulticastAclIntfListRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.6.1.2 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMulticastAclListVlanGroupTable | 1.3.6.1.4.1.1332.1.1.5.3.100.7 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The table below links the multicast groups to the ACL. | |||||||||||||||||||||
| RmsanMulticastAclListVlanGroupEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.7.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated Description. | |||||||||||||||||||||
| CmsanMulticastAclListVlanGroupIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.100.7.1.1 | IpAddress | NA | deprecated | |||||||||||||||||
column · IpAddress · not-accessible · deprecated IP multicast address of valid ACL multicast group. | |||||||||||||||||||||
| CmsanMulticastAclListVlanGroupRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.7.1.2 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMulticastIntfVlanStaticGroupTable | 1.3.6.1.4.1.1332.1.1.5.3.100.8 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMulticastIntfVlanStaticGroupEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.8.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanMulticastIntfVlanStaticGroupIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.100.8.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current IP multicast address of valid multicast group. | |||||||||||||||||||||
| CmsanMulticastIntfVlanStaticGroupRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.8.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMulticastAccessListTable | 1.3.6.1.4.1.1332.1.1.5.3.100.9 | NA | |||||||||||||||||||
table · not-accessible · current The table below assigns the symbolic names to the specific multicast ACLs. | |||||||||||||||||||||
| RmsanMulticastAccessListEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.9.1 | NA | |||||||||||||||||||
| CmsanMulticastAccessListName | 1.3.6.1.4.1.1332.1.1.5.3.100.9.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current ACL list symbolic name. Should be unique. | |||||||||||||||||||||
| CmsanMulticastAccessListRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.9.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndGo(4). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMulticastAccessListGroupTable | 1.3.6.1.4.1.1332.1.1.5.3.100.10 | NA | |||||||||||||||||||
table · not-accessible · current The table below links the multicast addresses to the ACL list | |||||||||||||||||||||
| RmsanMulticastAccessListGroupEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.10.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanMulticastAccessListGroupIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.100.10.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current IP multicast address of valid ACL multicast group. | |||||||||||||||||||||
| CmsanMulticastAccessListGroupRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.10.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanMulticastAccessListIntfTable | 1.3.6.1.4.1.1332.1.1.5.3.100.11 | NA | |||||||||||||||||||
table · not-accessible · current The table below assigns the multicast ACL list to the interfaces | |||||||||||||||||||||
| RmsanMulticastAccessListIntfEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.11.1 | NA | |||||||||||||||||||
| CmsanMulticastAccessListIntfMode | 1.3.6.1.4.1.1332.1.1.5.3.100.11.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Defines the mode in which interface for specified ACL list works.
| |||||||||||||||||||||
| CmsanMulticastAccessListIntfRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.11.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| TmsanSwitchMFDBTable | 1.3.6.1.4.1.1332.1.1.5.3.100.12 | NA | |||||||||||||||||||
table · not-accessible · current The Multicast Forwarding Database table | |||||||||||||||||||||
| RmsanSwitchMFDBEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.12.1 | NA | |||||||||||||||||||
row · not-accessible · current Contains Forwarding and Filtering information per Component User, Vlan Index, and MAC Address. | |||||||||||||||||||||
| CmsanSwitchMFDBProtocolType | 1.3.6.1.4.1.1332.1.1.5.3.100.12.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The component that is responsible for this entry in the Multicast Forwarding Database.
| |||||||||||||||||||||
| CmsanSwitchMFDBVlanId | 1.3.6.1.4.1.1332.1.1.5.3.100.12.1.2 | VlanIndex | RO | ||||||||||||||||||
column · VlanIndex · read-only · current Vlan Index for which this entry is associated with. | |||||||||||||||||||||
| CmsanSwitchMFDBMacAddress | 1.3.6.1.4.1.1332.1.1.5.3.100.12.1.3 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current A multicast MAC address for which the switch has forwarding and or filtering information. | |||||||||||||||||||||
| CmsanSwitchMFDBType | 1.3.6.1.4.1.1332.1.1.5.3.100.12.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
| |||||||||||||||||||||
| CmsanSwitchMFDBDescription | 1.3.6.1.4.1.1332.1.1.5.3.100.12.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Text description of this multicast table entry. | |||||||||||||||||||||
| CmsanSwitchMFDBForwardingPortMask | 1.3.6.1.4.1.1332.1.1.5.3.100.12.1.6 | PortMask | RO | ||||||||||||||||||
column · PortMask · read-only · current BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | |||||||||||||||||||||
| CmsanSwitchMFDBFilteringPortMask | 1.3.6.1.4.1.1332.1.1.5.3.100.12.1.7 | PortMask | RO | ||||||||||||||||||
column · PortMask · read-only · current BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | |||||||||||||||||||||
| TmsanMulticastStaticClientTable | 1.3.6.1.4.1.1332.1.1.5.3.100.13 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanMulticastStaticClientEntry | 1.3.6.1.4.1.1332.1.1.5.3.100.13.1 | NA | |||||||||||||||||||
| CmsanMulticastStaticClientIpAddr | 1.3.6.1.4.1.1332.1.1.5.3.100.13.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current Multicast static client IP address on specified vlan_id. | |||||||||||||||||||||
| CmsanMulticastStaticClientRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.100.13.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanFiltering | 1.3.6.1.4.1.1332.1.1.5.3.101 | ||||||||||||||||||||
| NmsanFilteringGlobal | 1.3.6.1.4.1.1332.1.1.5.3.101.2 | ||||||||||||||||||||
| TmsanFilteringFilterTable | 1.3.6.1.4.1.1332.1.1.5.3.101.3 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Defines a list of filters. | |||||||||||||||||||||
| RmsanFilteringFilterEntry | 1.3.6.1.4.1.1332.1.1.5.3.101.3.1 | NA | deprecated | ||||||||||||||||||
| CmsanFilteringFilterId | 1.3.6.1.4.1.1332.1.1.5.3.101.3.1.1 | Integer32 (1..64 | 301..500) | RW | deprecated | |||||||||||||||||
column · Integer32 (1..64 | 301..500) · read-write · deprecated Filter identity. | |||||||||||||||||||||
| CmsanFilteringFilterName | 1.3.6.1.4.1.1332.1.1.5.3.101.3.1.2 | OCTET STRING | RW | deprecated | |||||||||||||||||
column · OCTET STRING · read-write · deprecated Name of filter to be shown. | |||||||||||||||||||||
| CmsanFilteringFilterType | 1.3.6.1.4.1.1332.1.1.5.3.101.3.1.3 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated Type of filter (static or dynamic).
| |||||||||||||||||||||
| CmsanFilteringFilterRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.101.3.1.4 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated SNMP row status. Supported values: active(1) - valid entry; createAndGo(4) - used to create a new entry; destroy(6) - removes the entry. | |||||||||||||||||||||
| TmsanFilteringAssignFilterTable | 1.3.6.1.4.1.1332.1.1.5.3.101.4 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated This table defines a list of filters assigned to interface. | |||||||||||||||||||||
| RmsanFilteringAssignFilterEntry | 1.3.6.1.4.1.1332.1.1.5.3.101.4.1 | NA | deprecated | ||||||||||||||||||
| CmsanFilteringAssignFilterVid | 1.3.6.1.4.1.1332.1.1.5.3.101.4.1.1 | Integer32 (0..4094) | RW | deprecated | |||||||||||||||||
column · Integer32 (0..4094) · read-write · deprecated ID of VLAN to be filtered. | |||||||||||||||||||||
| CmsanFilteringAssignFilterCos | 1.3.6.1.4.1.1332.1.1.5.3.101.4.1.2 | Integer32 (0..7) | RW | deprecated | |||||||||||||||||
column · Integer32 (0..7) · read-write · deprecated CoS value to be filtered. | |||||||||||||||||||||
| CmsanFilteringAssignFilterDscp | 1.3.6.1.4.1.1332.1.1.5.3.101.4.1.3 | Integer32 (0..63) | RW | deprecated | |||||||||||||||||
column · Integer32 (0..63) · read-write · deprecated DSCP field. | |||||||||||||||||||||
| CmsanFilteringAssignFilterPrec | 1.3.6.1.4.1.1332.1.1.5.3.101.4.1.4 | Integer32 (0..7) | RW | deprecated | |||||||||||||||||
column · Integer32 (0..7) · read-write · deprecated Precedence in DSCP tag. | |||||||||||||||||||||
| CmsanFilteringAssignFilterRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.101.4.1.5 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated SNMP row status. Supported values: active(1) - valid entry; createAndGo(4) - used to create a new entry; destroy(6) - removes the entry. | |||||||||||||||||||||
| TmsanFilteringRuleTable | 1.3.6.1.4.1.1332.1.1.5.3.101.5 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated This table defines a list of filtering rules associated to filters. | |||||||||||||||||||||
| RmsanFilteringRuleEntry | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1 | NA | deprecated | ||||||||||||||||||
| CmsanFilteringRuleId | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.1 | Integer32 (1..65535) | RO | deprecated | |||||||||||||||||
column · Integer32 (1..65535) · read-only · deprecated Filtering rule identity. | |||||||||||||||||||||
| CmsanFilteringRuleResponse | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Filter response.
| |||||||||||||||||||||
| CmsanFilteringRuleFromMac | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.3 | MacAddress | RW | deprecated | |||||||||||||||||
column · MacAddress · read-write · deprecated Source Ethernet address. | |||||||||||||||||||||
| CmsanFilteringRuleFromMacMask | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.4 | MacAddress | RW | deprecated | |||||||||||||||||
column · MacAddress · read-write · deprecated Source Ethernet address mask. | |||||||||||||||||||||
| CmsanFilteringRuleFromIp | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.5 | IpAddress | RW | deprecated | |||||||||||||||||
column · IpAddress · read-write · deprecated Source IP address. | |||||||||||||||||||||
| CmsanFilteringRuleFromMask | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.6 | IpAddress | RW | deprecated | |||||||||||||||||
column · IpAddress · read-write · deprecated Source IP address mask. | |||||||||||||||||||||
| CmsanFilteringRuleFromPortLow | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.7 | Unsigned32 (0..65535) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..65535) · read-write · deprecated The lowest number of a source TCP or UDP port. | |||||||||||||||||||||
| CmsanFilteringRuleFromPortHigh | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.8 | Unsigned32 (0..65535) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..65535) · read-write · deprecated The highest number of a source TCP or UDP port.. | |||||||||||||||||||||
| CmsanFilteringRuleToMac | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.9 | MacAddress | RW | deprecated | |||||||||||||||||
column · MacAddress · read-write · deprecated Destination Ethernet address. | |||||||||||||||||||||
| CmsanFilteringRuleToMacMask | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.10 | MacAddress | RW | deprecated | |||||||||||||||||
column · MacAddress · read-write · deprecated Destination Ethernet address mask. | |||||||||||||||||||||
| CmsanFilteringRuleToIp | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.11 | IpAddress | RW | deprecated | |||||||||||||||||
column · IpAddress · read-write · deprecated Destination IP address. | |||||||||||||||||||||
| CmsanFilteringRuleToMask | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.12 | IpAddress | RW | deprecated | |||||||||||||||||
column · IpAddress · read-write · deprecated Destination IP address mask. | |||||||||||||||||||||
| CmsanFilteringRuleToPortLow | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.13 | Unsigned32 (0..65535) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..65535) · read-write · deprecated The lowest number of a destination TCP or UDP port. | |||||||||||||||||||||
| CmsanFilteringRuleToPortHigh | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.14 | Unsigned32 (0..65535) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..65535) · read-write · deprecated The highest number of a destination TCP or UDP port. | |||||||||||||||||||||
| CmsanFilteringRuleEtherProto | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.15 | OCTET STRING | RW | deprecated | |||||||||||||||||
column · OCTET STRING · read-write · deprecated Ethernet protocol to be filtered. | |||||||||||||||||||||
| CmsanFilteringRuleIpProto | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.16 | OCTET STRING | RW | deprecated | |||||||||||||||||
column · OCTET STRING · read-write · deprecated IP protocol to be filtered. | |||||||||||||||||||||
| CmsanFilteringRuleIcmType | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.17 | Unsigned32 (0..255) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..255) · read-write · deprecated ICMP type. ICMP sends an error message to the transmitter of IP packets and provides information at IP packet processing. | |||||||||||||||||||||
| CmsanFilteringRulePrec | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.18 | Unsigned32 (0..7) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..7) · read-write · deprecated Precedence in DSCP tag. | |||||||||||||||||||||
| CmsanFilteringRuleTos | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.19 | Unsigned32 (0..15) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..15) · read-write · deprecated TOS to be filtered. | |||||||||||||||||||||
| CmsanFilteringRuleVid | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.20 | Unsigned32 (0..4094) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..4094) · read-write · deprecated ID of VLAN to be filtered. | |||||||||||||||||||||
| CmsanFilteringRuleCos | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.21 | Unsigned32 (0..7) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (0..7) · read-write · deprecated CoS value to be filtered. | |||||||||||||||||||||
| CmsanFilteringRuleTag | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.22 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated 802.1Q tag.
| |||||||||||||||||||||
| CmsanFilteringRuleRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.101.5.1.23 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated SNMP row status. Supported values: active(1) - valid entry; createAndGo(4) - used to create a new entry; destroy(6) - removes the entry. | |||||||||||||||||||||
| TmsanFilteringAttachedFilterTable | 1.3.6.1.4.1.1332.1.1.5.3.101.6 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated This table defines information about filters attached to interface. | |||||||||||||||||||||
| RmsanFilteringAttachedFilterEntry | 1.3.6.1.4.1.1332.1.1.5.3.101.6.1 | NA | deprecated | ||||||||||||||||||
| CmsanFilteringAttachedFilterDirect | 1.3.6.1.4.1.1332.1.1.5.3.101.6.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Point of attaching a filter.
| |||||||||||||||||||||
| CmsanFilteringAttachedFilterRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.101.6.1.2 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated SNMP row status. Supported values: active(1) - valid entry; createAndGo(4) - used to create a new entry; destroy(6) - removes the entry. | |||||||||||||||||||||
| NmsanBridge | 1.3.6.1.4.1.1332.1.1.5.3.102 | ||||||||||||||||||||
| NmsanBridgeGlobal | 1.3.6.1.4.1.1332.1.1.5.3.102.1 | ||||||||||||||||||||
| SmsanBridgeMode | 1.3.6.1.4.1.1332.1.1.5.3.102.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
scalar · INTEGER · read-write · deprecated A bridge operating mode. bridge(1) ccx(2)
| |||||||||||||||||||||
| SmsanBridgeMacTableSize | 1.3.6.1.4.1.1332.1.1.5.3.102.1.2 | INTEGER (64..4095) | RW | deprecated | |||||||||||||||||
scalar · INTEGER (64..4095) · read-write · deprecated The maximum MAC table size | |||||||||||||||||||||
| SmsanBridgeRedAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.102.1.3 | INTEGER | RW | deprecated | |||||||||||||||||
scalar · INTEGER · read-write · deprecated Enable or disable Random Early Discard functionality.
| |||||||||||||||||||||
| TmsanBridgeCCXTable | 1.3.6.1.4.1.1332.1.1.5.3.102.2 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The table contents the information about all CCX pairs. | |||||||||||||||||||||
| RmsanBridgeCCXEntry | 1.3.6.1.4.1.1332.1.1.5.3.102.2.1 | NA | deprecated | ||||||||||||||||||
| CmsanBridgeCCXInterface1 | 1.3.6.1.4.1.1332.1.1.5.3.102.2.1.1 | InterfaceIndex | RC | deprecated | |||||||||||||||||
column · InterfaceIndex · read-create · deprecated The first interface to make cross-connection exchange | |||||||||||||||||||||
| CmsanBridgeCCXInterface2 | 1.3.6.1.4.1.1332.1.1.5.3.102.2.1.2 | InterfaceIndex | RC | deprecated | |||||||||||||||||
column · InterfaceIndex · read-create · deprecated The second interface to make cross-connection exchange | |||||||||||||||||||||
| CmsanBridgeCCXRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.102.2.1.3 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanIPSG | 1.3.6.1.4.1.1332.1.1.5.3.103 | ||||||||||||||||||||
| NmsanIPSGGlobal | 1.3.6.1.4.1.1332.1.1.5.3.103.1 | ||||||||||||||||||||
| SmsanIPSGAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.103.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable IPv4 source guard for all interfaces
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIPSGStoreAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.103.1.2 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable storing of the IP-MAC binds to the interoperation table.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIPSGIpv6AdminMode | 1.3.6.1.4.1.1332.1.1.5.3.103.1.3 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable IPv6 source guard for all interfaces
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanIPSGClearDynamicBinds | 1.3.6.1.4.1.1332.1.1.5.3.103.1.4 | INTEGER | RW | disable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Clear IPSG snooping tables for all ports.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanIPSGIntfTable | 1.3.6.1.4.1.1332.1.1.5.3.103.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIPSGIntfEntry | 1.3.6.1.4.1.1332.1.1.5.3.103.2.1 | NA | |||||||||||||||||||
| CmsanIPSGIntfAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.103.2.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Enable/disable IP Source Guard for the selected interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGIntfBindsLimit | 1.3.6.1.4.1.1332.1.1.5.3.103.2.1.2 | Integer32 (0..15) | RW | 4 | |||||||||||||||||
column · Integer32 (0..15) · read-write · current IPSG binding limit for DHCPv4 snooping table per interface. Value 0 defines there is no limit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGIntfFilteringMode | 1.3.6.1.4.1.1332.1.1.5.3.103.2.1.3 | INTEGER | RW | ipmac(2) | |||||||||||||||||
column · INTEGER · read-write · current Sets the traffic filtering type. Traffic can be filtered either by IP or by both IP and MAC address.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGIntfIpv6AdminMode | 1.3.6.1.4.1.1332.1.1.5.3.103.2.1.4 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Enable/disable IPv6 Source Guard for the selected interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGIntfBindsLimitDhcpv6 | 1.3.6.1.4.1.1332.1.1.5.3.103.2.1.5 | Integer32 (0..15) | RW | 4 | |||||||||||||||||
column · Integer32 (0..15) · read-write · current IPSG binding limit for DHCPv6 (IPv6 DHCP)snooping table per interface. Value 0 defines there is no limit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGIntfBindsLimitND | 1.3.6.1.4.1.1332.1.1.5.3.103.2.1.6 | Integer32 (0..15) | RW | 4 | |||||||||||||||||
column · Integer32 (0..15) · read-write · current IPSG binding limit for ND (IPv6 Neighbor Discovery) snooping table per interface Value 0 defines there is no limit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGIntfClearDynamicBinds | 1.3.6.1.4.1.1332.1.1.5.3.103.2.1.7 | INTEGER | RW | disable(1) | |||||||||||||||||
column · INTEGER · read-write · current Clear IPSG snooping tables per interface
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanIPSGBindingsTable | 1.3.6.1.4.1.1332.1.1.5.3.103.3 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated DThe table for storing IP source binding | |||||||||||||||||||||
| RmsanIPSGBindingsEntry | 1.3.6.1.4.1.1332.1.1.5.3.103.3.1 | NA | deprecated | ||||||||||||||||||
| CmsanIPSGBindIp | 1.3.6.1.4.1.1332.1.1.5.3.103.3.1.1 | IpAddress | RW | deprecated | |||||||||||||||||
column · IpAddress · read-write · deprecated Allowed IP address | |||||||||||||||||||||
| CmsanIPSGBindVlan | 1.3.6.1.4.1.1332.1.1.5.3.103.3.1.2 | VlanIndex | RO | deprecated | |||||||||||||||||
column · VlanIndex · read-only · deprecated Allowed VLAN number | |||||||||||||||||||||
| CmsanIPSGBindMac | 1.3.6.1.4.1.1332.1.1.5.3.103.3.1.3 | MacAddress | RO | deprecated | |||||||||||||||||
column · MacAddress · read-only · deprecated Allowed MAC address | |||||||||||||||||||||
| CmsanIPSGBindLeaseRemainingTime | 1.3.6.1.4.1.1332.1.1.5.3.103.3.1.4 | TimeTicks | RO | deprecated | |||||||||||||||||
column · TimeTicks · read-only · deprecated The period for which the DHCP lease is valid. It is displayed in days, hours, minutes, and seconds. For static IPSG bindings this value is set to 0 (infinitive). | |||||||||||||||||||||
| CmsanIPSGBindType | 1.3.6.1.4.1.1332.1.1.5.3.103.3.1.5 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated Type of IPSG binding.
| |||||||||||||||||||||
| CmsanIPSGBindMatchedFrames | 1.3.6.1.4.1.1332.1.1.5.3.103.3.1.6 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated Number of matched frames for selected IPSG binding. | |||||||||||||||||||||
| CmsanIPSGBindRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.103.3.1.7 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. For row activation next terms must be accomplished: - msanIPSGBindIp must be defined | |||||||||||||||||||||
| TmsanIPSGIpv4PortStaticBindTable | 1.3.6.1.4.1.1332.1.1.5.3.103.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIPSGIpv4PortStaticBindEntry | 1.3.6.1.4.1.1332.1.1.5.3.103.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanIPSGIpv4PortStaticBindMacAddress | 1.3.6.1.4.1.1332.1.1.5.3.103.4.1.1 | MacAddress | NA | ||||||||||||||||||
column · MacAddress · not-accessible · current Allowed MAC address | |||||||||||||||||||||
| CmsanIPSGIpv4PortStaticBindVlanId | 1.3.6.1.4.1.1332.1.1.5.3.103.4.1.2 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current Allowed VLAN number | |||||||||||||||||||||
| CmsanIPSGIpv4PortStaticBindIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.103.4.1.3 | InetAddressIPv4 | NA | ||||||||||||||||||
column · InetAddressIPv4 · not-accessible · current Allowed IPv4 address | |||||||||||||||||||||
| CmsanIPSGIpv4PortStaticBindMatchedFrames | 1.3.6.1.4.1.1332.1.1.5.3.103.4.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of matched frames for selected IPSG binding. | |||||||||||||||||||||
| CmsanIPSGIpv4PortStaticBindRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.103.4.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndGo(4). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| TmsanIPSGIpv6PortStaticBindTable | 1.3.6.1.4.1.1332.1.1.5.3.103.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIPSGIpv6PortStaticBindEntry | 1.3.6.1.4.1.1332.1.1.5.3.103.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanIPSGIpv6PortStaticBindMacAddress | 1.3.6.1.4.1.1332.1.1.5.3.103.5.1.1 | MacAddress | NA | ||||||||||||||||||
column · MacAddress · not-accessible · current Allowed MAC address | |||||||||||||||||||||
| CmsanIPSGIpv6PortStaticBindVlanId | 1.3.6.1.4.1.1332.1.1.5.3.103.5.1.2 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current Allowed VLAN number | |||||||||||||||||||||
| CmsanIPSGIpv6PortStaticBindIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.103.5.1.3 | InetAddressIPv6 | NA | ||||||||||||||||||
column · InetAddressIPv6 · not-accessible · current Allowed IPv6 address | |||||||||||||||||||||
| CmsanIPSGIpv6PortStaticBindMatchedFrames | 1.3.6.1.4.1.1332.1.1.5.3.103.5.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of matched frames for selected IPSG binding. | |||||||||||||||||||||
| CmsanIPSGIpv6PortStaticBindRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.103.5.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndGo(4). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| TmsanIPSGPortBindCurrentTable | 1.3.6.1.4.1.1332.1.1.5.3.103.6 | NA | |||||||||||||||||||
table · not-accessible · current DThe table for storing IP source binding | |||||||||||||||||||||
| RmsanIPSGPortBindCurrentEntry | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1 | NA | |||||||||||||||||||
| CmsanIPSGPortBindCurrentId | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Table index. | |||||||||||||||||||||
| CmsanIPSGPortBindCurrentIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.2 | InterfaceIndex | RO | 3089 | |||||||||||||||||
column · InterfaceIndex · read-only · current Port index (ifIndex value). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGPortBindCurrentMacAddress | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.3 | MacAddress | RO | e0:73:e7:c8:97:1a | |||||||||||||||||
column · MacAddress · read-only · current Allowed MAC address Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGPortBindCurrentVlanId | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.4 | VlanIndex | RO | 487 | |||||||||||||||||
column · VlanIndex · read-only · current Allowed VLAN number Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGPortBindCurrentIpAddressType | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.5 | InetAddressType | RO | 2 | |||||||||||||||||
column · InetAddressType · read-only · current Specifies the type of ip address: ipv4[1], ipv6[2]. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGPortBindCurrentIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.6 | InetAddress | RO | 26:05:7b:80:00:12:04:87:a4:cb:05:c0:6a:97:24:64 | |||||||||||||||||
column · InetAddress · read-only · current Allowed IP address Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGPortBindCurrentLeaseRemainingTime | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.7 | TimeTicks | RO | 4294892057 (497d 2h 15m 20s) | |||||||||||||||||
column · TimeTicks · read-only · current The period for which the DHCP lease is valid. It is displayed in days, hours, minutes, and seconds. For static IPSG bindings this value is set to 0 (infinitive). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGPortBindCurrentType | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.8 | INTEGER | RO | dynamic-dhcpv6(3) | |||||||||||||||||
column · INTEGER · read-only · current Type of IPSG binding.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanIPSGPortBindCurrentMatchedFrames | 1.3.6.1.4.1.1332.1.1.5.3.103.6.1.9 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Number of matched frames for selected IPSG binding. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanVlan | 1.3.6.1.4.1.1332.1.1.5.3.105 | ||||||||||||||||||||
| NmsanVlanGlobal | 1.3.6.1.4.1.1332.1.1.5.3.105.1 | ||||||||||||||||||||
| SmsanDVlanTagMode | 1.3.6.1.4.1.1332.1.1.5.3.105.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
scalar · INTEGER · read-write · deprecated Controls the Double Vlan Tag mode on the system.
| |||||||||||||||||||||
| SmsanVlanRemarkAdminState | 1.3.6.1.4.1.1332.1.1.5.3.105.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
scalar · INTEGER · read-write · deprecated Global VLAN Remarking administrative state.
| |||||||||||||||||||||
| SmsanInternalVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.1.3 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Internal Vlan ID. | |||||||||||||||||||||
| TmsanPortVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.105.2 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Vlan config parameters per port. | |||||||||||||||||||||
| RmsanPortVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.105.2.1 | NA | deprecated | ||||||||||||||||||
| CmsanPortVlanMode | 1.3.6.1.4.1.1332.1.1.5.3.105.2.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Interface vlan mode.
| |||||||||||||||||||||
| CmsanPortVlanStackPriority | 1.3.6.1.4.1.1332.1.1.5.3.105.2.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Priority of inner tag when interface is in vlanStacking mode (msanPortVlanMode=vlanStacking).
| |||||||||||||||||||||
| CmsanPortVlanStackVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.2.1.3 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated Vlan ID of inner tag when interface is in vlanStacking mode (msanPortVlanMode=vlanStacking). | |||||||||||||||||||||
| TmsanPortDVlanMapTable | 1.3.6.1.4.1.1332.1.1.5.3.105.3 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Ingress mapping of inner VID to outer VID different from default (PVID) mapping. | |||||||||||||||||||||
| RmsanPortDVlanMapEntry | 1.3.6.1.4.1.1332.1.1.5.3.105.3.1 | NA | deprecated | ||||||||||||||||||
| CmsanPortDVlanMapInTagVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.3.1.1 | Integer32 | NA | deprecated | |||||||||||||||||
column · Integer32 · not-accessible · deprecated Inner tag VLAN ID. DVlan functionality is used when interface is in dot1qtunnel mode. | |||||||||||||||||||||
| CmsanPortDVlanMapOutTagVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.3.1.2 | Integer32 | RC | deprecated | |||||||||||||||||
column · Integer32 · read-create · deprecated Outer tag VLAN ID added for inner tag VLAN ID (msanPortDVlanMapInTagVlanId). DVlan functionality is used when interface is in dot1qtunnel mode. Value of -1 indicates that outer tag is not added for selected inner tag VLAN ID. | |||||||||||||||||||||
| CmsanPortDVlanMapRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.105.3.1.3 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. Setting this object to active(1) will activate this entry. Setting this object to destroy(6) will remove this entry. | |||||||||||||||||||||
| TmsanPortVlanRemarkTable | 1.3.6.1.4.1.1332.1.1.5.3.105.4 | NA | |||||||||||||||||||
table · not-accessible · current Vlan remarking table for ingress traffic (per port). Note: All defined Vlan remarking rules for ingress traffic also add , automatically, reverse Vlan remarking rule for egress traffic on same port. | |||||||||||||||||||||
| RmsanPortVlanRemarkEntry | 1.3.6.1.4.1.1332.1.1.5.3.105.4.1 | NA | |||||||||||||||||||
| CmsanPortVlanRemarkSrcVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.4.1.1 | Integer32 (1..4094) | RW | 10 | |||||||||||||||||
column · Integer32 (1..4094) · read-write · current Ingress traffic Source VLAN ID which will be changed to Destination VLAN ID (msanPortVlanRemarkDstVlanId) by VLAN remarking rule. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortVlanRemarkDstVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.4.1.2 | Integer32 (1..4094) | RW | 487 | |||||||||||||||||
column · Integer32 (1..4094) · read-write · current Destination VLAN ID to which will be changed Source VLAN ID of ingress traffic (msanPortVlanRemarkSrcVlanId) by VLAN remarking rule. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortVlanRemarkRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.105.4.1.3 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. For row activation next terms must be accomplished: - msanPortVlanRemarkDstVlanId must be defined (default value not defined) Note: All defined Vlan remarking rules for ingress traffic also add , automatically, reverse Vlan remarking rule for egress traffic on same port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanPortDVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.105.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortDVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.105.5.1 | NA | |||||||||||||||||||
| CmsanPortDVlanTagMode | 1.3.6.1.4.1.1332.1.1.5.3.105.5.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Administrative state of 802.1Q tunneling (DVLAN) mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortDVlanStackVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.5.1.2 | Integer32 | RW | -1 | |||||||||||||||||
column · Integer32 · read-write · current Vlan ID of inner tag when interface is in vlanStacking mode. Interface is in vlanStacking mode when msanPortDVlanTagMode=enable and msanPortDVlanStackVlanId>=0. msanPortDVlanStackVlanId value of -1 indicates that vlanStacking mode is not activated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanPortDVlanStackPriority | 1.3.6.1.4.1.1332.1.1.5.3.105.5.1.3 | INTEGER | RW | priority0(0) | |||||||||||||||||
column · INTEGER · read-write · current Priority of inner tag when interface is in vlanStacking mode. Interface is in vlanStacking mode when msanPortDVlanTagMode=enable and msanPortDVlanStackVlanId>=0.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanPortDVlanConfigTable | 1.3.6.1.4.1.1332.1.1.5.3.105.6 | NA | |||||||||||||||||||
table · not-accessible · current Ingress mapping of inner VID to outer VID different from default (PVID) mapping. | |||||||||||||||||||||
| RmsanPortDVlanConfigEntry | 1.3.6.1.4.1.1332.1.1.5.3.105.6.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanDVlanConfigInTagVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Inner tag VLAN ID. DVlan functionality is used when interface is in dot1qtunnel mode. | |||||||||||||||||||||
| CmsanDVlanConfigInTagPriority | 1.3.6.1.4.1.1332.1.1.5.3.105.6.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Priority of inner tag. Value unspecified(8) defines that rule line applies to all packets with appropriate msanDVlanConfigInTagVlanId, except if packet match to other more specific rule.
| |||||||||||||||||||||
| CmsanDVlanConfigOutTagVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.6.1.3 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Outer tag VLAN ID added for inner tag VLAN ID (msanPortDVlanConfigInTagVlanId). DVlan functionality is used when interface is in dot1qtunnel mode. Value of -1 indicates that outer tag is not added for selected inner tag VLAN ID. | |||||||||||||||||||||
| CmsanDVlanConfigOutTagPriority | 1.3.6.1.4.1.1332.1.1.5.3.105.6.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Priority of outer tag. Value unspecified(8) defines that msanDVlanMapInTagPriority is copied to outer tag.
| |||||||||||||||||||||
| CmsanDVlanConfigRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.105.6.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. Setting this object to active(1) will activate this entry. Setting this object to destroy(6) will remove this entry. | |||||||||||||||||||||
| TmsanPortVlanRemarkAdminTable | 1.3.6.1.4.1.1332.1.1.5.3.105.7 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortVlanRemarkAdminEntry | 1.3.6.1.4.1.1332.1.1.5.3.105.7.1 | NA | |||||||||||||||||||
| CmsanPortVlanRemarkAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.105.7.1.1 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Administrative mode for VLAN Remarking
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanUplinkPortVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.105.8 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanUplinkPortVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.105.8.1 | NA | |||||||||||||||||||
| CmsanUplinkPortVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.8.1.1 | Integer32 (0..4094) | NA | ||||||||||||||||||
column · Integer32 (0..4094) · not-accessible · current Vlan ID. | |||||||||||||||||||||
| CmsanUplinkPortVlanMode | 1.3.6.1.4.1.1332.1.1.5.3.105.8.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Vlan Mode.
| |||||||||||||||||||||
| CmsanUplinkPortVlanMulticastMode | 1.3.6.1.4.1.1332.1.1.5.3.105.8.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Vlan Multicast Mode. This parameter can't be set if msanUplinkPortVlanMulticastMode=unconfigured(3)
| |||||||||||||||||||||
| CmsanUplinkPortVlanRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.105.8.1.4 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. Setting object to active(1) will activate this entry -> INFO: parameter msanUplinkPortVlanMode must be defined. Setting object to destroy(6) will remove this entry. | |||||||||||||||||||||
| TmsanVlanPortStatisticsTable | 1.3.6.1.4.1.1332.1.1.5.3.105.9 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanVlanPortStatisticsEntry | 1.3.6.1.4.1.1332.1.1.5.3.105.9.1 | NA | |||||||||||||||||||
| CmsanVlanPortStatisticsVlanId | 1.3.6.1.4.1.1332.1.1.5.3.105.9.1.1 | Integer32 (0..4094) | NA | ||||||||||||||||||
column · Integer32 (0..4094) · not-accessible · current Description. | |||||||||||||||||||||
| CmsanVlanPortStatisticsInFrames | 1.3.6.1.4.1.1332.1.1.5.3.105.9.1.2 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of valid frames received by this port from its segment which were classified as belonging to this VLAN. | |||||||||||||||||||||
| CmsanVlanPortStatisticsOutFrames | 1.3.6.1.4.1.1332.1.1.5.3.105.9.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. | |||||||||||||||||||||
| CmsanVlanPortStatisticsInDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.105.9.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of valid frames received by this port from its segment which were classified as belonging to this VLAN which were discarded due to VLAN related reasons. Specifically, the IEEE 802.1Q counters for Discard | |||||||||||||||||||||
| CmsanVlanPortStatisticsInOctets | 1.3.6.1.4.1.1332.1.1.5.3.105.9.1.5 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of valid frames octets received by this port from its segment which were classified as belonging to this VLAN. | |||||||||||||||||||||
| CmsanVlanPortStatisticsOutOctets | 1.3.6.1.4.1.1332.1.1.5.3.105.9.1.6 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of valid frames octets transmitted by this port to its segment from the local forwarding process for this VLAN. | |||||||||||||||||||||
| NmsanAtm | 1.3.6.1.4.1.1332.1.1.5.3.106 | ||||||||||||||||||||
| NmsanAtmGlobal | 1.3.6.1.4.1.1332.1.1.5.3.106.1 | ||||||||||||||||||||
| TmsanPortAtmPvcTable | 1.3.6.1.4.1.1332.1.1.5.3.106.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanPortAtmPvcEntry | 1.3.6.1.4.1.1332.1.1.5.3.106.2.1 | NA | |||||||||||||||||||
| CmsanPortAtmPvcVpi | 1.3.6.1.4.1.1332.1.1.5.3.106.2.1.1 | Integer32 (0..255) | NA | ||||||||||||||||||
column · Integer32 (0..255) · not-accessible · current ATM-PVC(Permanent Virtual Circuits) VPI(Virtual Path Identifier) value. | |||||||||||||||||||||
| CmsanPortAtmPvcVci | 1.3.6.1.4.1.1332.1.1.5.3.106.2.1.2 | Integer32 (32..255) | NA | ||||||||||||||||||
column · Integer32 (32..255) · not-accessible · current ATM-PVC(Permanent Virtual Circuits) VCI(Virtual Channel Identifier) value. | |||||||||||||||||||||
| CmsanPortAtmPvcPvid | 1.3.6.1.4.1.1332.1.1.5.3.106.2.1.3 | INTEGER (0..4094) | RW | ||||||||||||||||||
column · INTEGER (0..4094) · read-write · current The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this ATM-PVC(Permanent Virtual Circuits). Value 0 defines that PVID is not set. | |||||||||||||||||||||
| CmsanPortAtmPvcRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.106.2.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. Setting this object to active(1) will activate this entry. Setting this object to destroy(6) will remove this entry. | |||||||||||||||||||||
| NmsanEnergyMeter | 1.3.6.1.4.1.1332.1.1.5.3.107 | ||||||||||||||||||||
| NmsanEnergyMeterGlobal | 1.3.6.1.4.1.1332.1.1.5.3.107.1 | ||||||||||||||||||||
| SmsanEnergyMeterIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.107.1.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Energy meter's Ip address. | |||||||||||||||||||||
| SmsanEnergyMeterTcpPort | 1.3.6.1.4.1.1332.1.1.5.3.107.1.2 | Unsigned32 (0..65535) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..65535) · read-write · current Energy meter's Tcp port. | |||||||||||||||||||||
| SmsanEnergyMeterAddress | 1.3.6.1.4.1.1332.1.1.5.3.107.1.3 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current Energy meter's address. | |||||||||||||||||||||
| SmsanEnergyMeterPassword | 1.3.6.1.4.1.1332.1.1.5.3.107.1.4 | Unsigned32 | RW | deprecated | |||||||||||||||||
scalar · Unsigned32 · read-write · deprecated Energy meter's password. | |||||||||||||||||||||
| SmsanEnergyMeterSerialNo | 1.3.6.1.4.1.1332.1.1.5.3.107.1.5 | OCTET STRING (SIZE (1..128)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (1..128)) · read-only · current Energy meter's serial number. | |||||||||||||||||||||
| SmsanEnergyMeterDateTime | 1.3.6.1.4.1.1332.1.1.5.3.107.1.6 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Energy meter's date and time in format: year-month-day, hour:minutes:seconds | |||||||||||||||||||||
| SmsanEnergyMeterCurrTariff | 1.3.6.1.4.1.1332.1.1.5.3.107.1.7 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Energy meter's current active tariff. | |||||||||||||||||||||
| SmsanEnergyMeterCurrPower | 1.3.6.1.4.1.1332.1.1.5.3.107.1.8 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Energy meter's current measured power.
| |||||||||||||||||||||
| SmsanEnergyMeterCoreVersion | 1.3.6.1.4.1.1332.1.1.5.3.107.1.9 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Energy meter's current version number. | |||||||||||||||||||||
| SmsanEnergyMeterFwType | 1.3.6.1.4.1.1332.1.1.5.3.107.1.10 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Energy meter's current firmware type. | |||||||||||||||||||||
| SmsanEnergyMeterFwVersion | 1.3.6.1.4.1.1332.1.1.5.3.107.1.11 | Unsigned32 | RO | deprecated | |||||||||||||||||
scalar · Unsigned32 · read-only · deprecated Energy meter's current firmware version. | |||||||||||||||||||||
| SmsanEnergyMeterFwCreationDate | 1.3.6.1.4.1.1332.1.1.5.3.107.1.12 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Energy meter's current firmware creation date in format: year-month-day | |||||||||||||||||||||
| SmsanEnergyMeterStdPassword | 1.3.6.1.4.1.1332.1.1.5.3.107.1.13 | DisplayString (SIZE (0..8)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..8)) · read-write · current Energy meter's password as ASCII string (according to used standard IEC 61107-2001 / IEC 62056-21). | |||||||||||||||||||||
| SmsanEnergyMeterStdFwVersion | 1.3.6.1.4.1.1332.1.1.5.3.107.1.14 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Energy meter's current firmware version as ASCII string (according to used standard IEC 61107-2001 / IEC 62056-21). | |||||||||||||||||||||
| TmsanEnergyMeterEnergyTable | 1.3.6.1.4.1.1332.1.1.5.3.107.2 | NA | |||||||||||||||||||
table · not-accessible · current Energy values. | |||||||||||||||||||||
| RmsanEnergyMeterEnergyEntry | 1.3.6.1.4.1.1332.1.1.5.3.107.2.1 | NA | |||||||||||||||||||
| CmsanEnergyMeterTariff | 1.3.6.1.4.1.1332.1.1.5.3.107.2.1.1 | Unsigned32 (1..8) | NA | ||||||||||||||||||
column · Unsigned32 (1..8) · not-accessible · current This is msanEnergyMeterTariff index in msanEnergyMeterEnergyTable Defines tariff. 1 tariff No1, 1 tariff No2, , 8 - tariff No8 | |||||||||||||||||||||
| CmsanEnergyMeterDepth | 1.3.6.1.4.1.1332.1.1.5.3.107.2.1.2 | Unsigned32 (1..13) | NA | ||||||||||||||||||
column · Unsigned32 (1..13) · not-accessible · current This is msanEnergyMeterDepth index in msanEnergyMeterEnergyTable. Defines time span. 1 current value, 2 value at the end of previous month, 3 value at the end of 2. month ago, , 13 value at the end of the 12. month ago | |||||||||||||||||||||
| CmsanEnergyMeterEnergyValue | 1.3.6.1.4.1.1332.1.1.5.3.107.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Energy value.
| |||||||||||||||||||||
| TmsanEnergyMeterEnergySumTable | 1.3.6.1.4.1.1332.1.1.5.3.107.3 | NA | |||||||||||||||||||
table · not-accessible · current Energy sum values of all tariffs. | |||||||||||||||||||||
| RmsanEnergyMeterEnergySumEntry | 1.3.6.1.4.1.1332.1.1.5.3.107.3.1 | NA | |||||||||||||||||||
| CmsanEnergyMeterEnergySumValue | 1.3.6.1.4.1.1332.1.1.5.3.107.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Energy sum value of all tariffs
| |||||||||||||||||||||
| NmsanArpInspection | 1.3.6.1.4.1.1332.1.1.5.3.108 | ||||||||||||||||||||
| NmsanArpInspectionGlobal | 1.3.6.1.4.1.1332.1.1.5.3.108.1 | ||||||||||||||||||||
| SmsanArpInspectionAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.108.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable global dynamic arp inspection
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanArpInspectionPortTable | 1.3.6.1.4.1.1332.1.1.5.3.108.2 | NA | |||||||||||||||||||
table · not-accessible · current Arp Inspection. | |||||||||||||||||||||
| RmsanArpInspectionPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.108.2.1 | NA | |||||||||||||||||||
| CmsanArpInspectionPortAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.108.2.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Enable/disable dynamic arp inspection for the selected interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanArpInspectionPortStatDroppedFrames | 1.3.6.1.4.1.1332.1.1.5.3.108.2.1.2 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Number of discarded ARP packets on interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanArpInspectionVlanTable | 1.3.6.1.4.1.1332.1.1.5.3.108.3 | NA | |||||||||||||||||||
table · not-accessible · current Arp Inspection. | |||||||||||||||||||||
| RmsanArpInspectionVlanEntry | 1.3.6.1.4.1.1332.1.1.5.3.108.3.1 | NA | |||||||||||||||||||
| CmsanArpInspectionVlanAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.108.3.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Enable/disable dynamic arp inspection per vlan.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanArpInspectionVlanStatDroppedFrames | 1.3.6.1.4.1.1332.1.1.5.3.108.3.1.2 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Number of discarded ARP packets per vlan. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanIsa | 1.3.6.1.4.1.1332.1.1.5.3.109 | ||||||||||||||||||||
| NmsanIsaGlobal | 1.3.6.1.4.1.1332.1.1.5.3.109.1 | ||||||||||||||||||||
| SmsanIsaTalAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.109.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current ISA TAL functionality global admin mode.
| |||||||||||||||||||||
| SmsanIsaDasServerPort | 1.3.6.1.4.1.1332.1.1.5.3.109.1.2 | Unsigned32 (0..65535) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..65535) · read-write · current ISA Radius DAS (Dynamic Authorization Server) port number. | |||||||||||||||||||||
| SmsanIsaDasServerSecret | 1.3.6.1.4.1.1332.1.1.5.3.109.1.3 | DisplayString (SIZE (0..16)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..16)) · read-write · current ISA Radius DAS (Dynamic Authorization Server) shared secret. | |||||||||||||||||||||
| SmsanIsaRadiusServerRetries | 1.3.6.1.4.1.1332.1.1.5.3.109.1.4 | Unsigned32 (1..15) | RW | ||||||||||||||||||
scalar · Unsigned32 (1..15) · read-write · current Maximum number of retransmissions of a ISA Radius request packet. | |||||||||||||||||||||
| SmsanIsaRadiusServerTimeout | 1.3.6.1.4.1.1332.1.1.5.3.109.1.5 | Unsigned32 (1..30) | RW | ||||||||||||||||||
scalar · Unsigned32 (1..30) · read-write · current Time out duration (in seconds) before packets are retransmitted to ISA Radius server
| |||||||||||||||||||||
| NmsanIsaStatistics | 1.3.6.1.4.1.1332.1.1.5.3.109.2 | ||||||||||||||||||||
| TmsanIsaPortStatTable | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIsaPortStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1 | NA | |||||||||||||||||||
| CmsanIsaPortStatTalMatchedFrames | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of TAL matched frames. | |||||||||||||||||||||
| CmsanIsaPortStatTalDroppedFrames | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of TAL dropped frames. | |||||||||||||||||||||
| CmsanIsaPortStatAuthenReqSent | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of sent Authentication requests. | |||||||||||||||||||||
| CmsanIsaPortStatAuthenReqConfirmed | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of confirmed Authentication requests. | |||||||||||||||||||||
| CmsanIsaPortStatAuthenReqRejected | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of rejected Authentication requests. | |||||||||||||||||||||
| CmsanIsaPortStatAuthenTimeoutExpired | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of expired Authentication timeouts. | |||||||||||||||||||||
| CmsanIsaPortStatAuthorReqSent | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.8 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of sent Authorization requests. | |||||||||||||||||||||
| CmsanIsaPortStatAuthorReqConfirmed | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of confirmed Authorization requests. | |||||||||||||||||||||
| CmsanIsaPortStatAuthorReqRejected | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.10 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of rejected Authorization requests. | |||||||||||||||||||||
| CmsanIsaPortStatAuthorTimeoutExpired | 1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.11 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of expired Authorization timeouts. | |||||||||||||||||||||
| SmsanIsaStatLoginReq | 1.3.6.1.4.1.1332.1.1.5.3.109.2.2 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Cumulative number of Login requests. | |||||||||||||||||||||
| SmsanIsaStatLoginUnsuccessfulReq | 1.3.6.1.4.1.1332.1.1.5.3.109.2.3 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Number of unsuccessful login requests. | |||||||||||||||||||||
| TmsanIsaRadiusServerTable | 1.3.6.1.4.1.1332.1.1.5.3.109.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIsaRadiusServerEntry | 1.3.6.1.4.1.1332.1.1.5.3.109.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanIsaRadiusServerIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.109.3.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current ISA Radius server IP address. | |||||||||||||||||||||
| CmsanIsaRadiusServerType | 1.3.6.1.4.1.1332.1.1.5.3.109.3.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current ISA Radius server type.
| |||||||||||||||||||||
| CmsanIsaRadiusServerPort | 1.3.6.1.4.1.1332.1.1.5.3.109.3.1.3 | Unsigned32 (0..65535) | RW | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-write · current ISA Radius server port number. If msanIsaRadiusServerType = authentication(1) then default port value is 1812. If msanIsaRadiusServerType = accounting(2) then default port value is 1813. | |||||||||||||||||||||
| CmsanIsaRadiusServerSecret | 1.3.6.1.4.1.1332.1.1.5.3.109.3.1.4 | DisplayString (SIZE (0..16)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current ISA Radius server shared secret. | |||||||||||||||||||||
| CmsanIsaRadiusServerPrimaryMode | 1.3.6.1.4.1.1332.1.1.5.3.109.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ISA Radius server primary mode. Only one server can be defined as primary(1).
| |||||||||||||||||||||
| CmsanIsaRadiusServerRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.109.3.1.6 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. For row activation parameter msanIsaRadiusServerType must be defined. | |||||||||||||||||||||
| TmsanIsaPortTable | 1.3.6.1.4.1.1332.1.1.5.3.109.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIsaPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.109.5.1 | NA | |||||||||||||||||||
| CmsanIsaPortTalAdminMode | 1.3.6.1.4.1.1332.1.1.5.3.109.5.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ISA TAL functionality admin mode.
| |||||||||||||||||||||
| CmsanIsaPortAuthentication | 1.3.6.1.4.1.1332.1.1.5.3.109.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ISA Authentication administrative state.
| |||||||||||||||||||||
| CmsanIsaPortAuthorization | 1.3.6.1.4.1.1332.1.1.5.3.109.5.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ISA Authorization administrative state.
| |||||||||||||||||||||
| CmsanIsaPortAccounting | 1.3.6.1.4.1.1332.1.1.5.3.109.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ISA Accounting administrative state.
| |||||||||||||||||||||
| CmsanIsaPortLoginMask | 1.3.6.1.4.1.1332.1.1.5.3.109.5.1.5 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current ISA login mask.
| |||||||||||||||||||||
| CmsanIsaPortLoginUserPatternMask | 1.3.6.1.4.1.1332.1.1.5.3.109.5.1.6 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current This mask value identifies the portion of input packet that is send to Radius server, if userPattern bit is set in msanIsaPortLoginMask. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaPortTalAutomaticReq | 1.3.6.1.4.1.1332.1.1.5.3.109.5.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current TAL automatic request state.
| |||||||||||||||||||||
| TmsanIsaTalPortMatchTable | 1.3.6.1.4.1.1332.1.1.5.3.109.6 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanIsaTalPortMatchEntry | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1 | NA | |||||||||||||||||||
| CmsanIsaTalPortMatchEthertype | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.1 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match incoming packet frame with specified EtherType value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPortMatchMacSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.2 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Match incoming packet frame with specified Source MAC address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPortMatchMacSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.3 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanIsaTalPortMatchMacSrcAddr that is compared with input packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanIsaTalPortMatchVlanId | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.4 | Integer32 (-1..4094) | RW | ||||||||||||||||||
column · Integer32 (-1..4094) · read-write · current Match incoming packet frame with specified VLAN ID value (1-4094). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanIsaTalPortMatchIpSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Match incoming packet frame with specified source IP address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPortMatchIpSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.6 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanIsaTalPortMatchIpSrcAddr that is compared with input packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanIsaTalPortMatchDhcpType | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Match incoming packet frame with specified DHCP type value.
| |||||||||||||||||||||
| CmsanIsaTalPortMatchDhcpOpt60VendorId | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Match incoming packet frame with specified DHCP option 60 vendorId value. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPortMatchDhcpOpt61ClientId | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.9 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Match incoming packet frame with specified DHCP option 61 clientId value. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPortMatchDhcpOpt61ClientIdMacAddr | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.10 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Match incoming packet frame with specified DHCP option 61 MAC address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPortMatchDhcpOpt82RemoteId | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.11 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Match incoming packet frame with specified DHCP option 82 remoteId value. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPortMatchUserBits | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.12 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current Match incoming packet frame with specified user defined bits. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPortMatchUserMask | 1.3.6.1.4.1.1332.1.1.5.3.109.6.1.13 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current This mask value identifies the portion of msanIsaTalPortMatchUserBits that is compared with input packet. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| TmsanIsaTalPatternMatchTable | 1.3.6.1.4.1.1332.1.1.5.3.109.7 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to store the pattern match name, pattern rules and the corresponding login mask for the pattern match. | |||||||||||||||||||||
| RmsanIsaTalPatternMatchEntry | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table contains the a unique pattern match along with the loginmask to identify the user login packets. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchName | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.1 | OCTET STRING (SIZE (1..64)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · not-accessible · current Pattern match name. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchEthertype | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.2 | Integer32 (-1..65535) | RW | ||||||||||||||||||
column · Integer32 (-1..65535) · read-write · current Match incoming packet frame with specified EtherType value. A value of -1 indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchMacSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.3 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Match incoming packet frame with specified Source MAC address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchMacSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.4 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current This mask value identifies the portion of msanIsaTalPatternMatchMacSrcAddr that is compared with input packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanIsaTalPatternMatchVlanId | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.5 | Integer32 (-1..4094) | RW | ||||||||||||||||||
column · Integer32 (-1..4094) · read-write · current Match incoming packet frame with specified VLAN ID value (1-4094). A value of -1 indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanIsaTalPatternMatchIpSrcAddr | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.6 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Match incoming packet frame with specified source IP address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchIpSrcMask | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.7 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This mask value identifies the portion of msanIsaTalPatternMatchIpSrcAddr that is compared with input packet. Empty string indicates that parameter has not been defined | |||||||||||||||||||||
| CmsanIsaTalPatternMatchDhcpType | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Match incoming packet frame with specified DHCP type value.
| |||||||||||||||||||||
| CmsanIsaTalPatternMatchDhcpOpt60VendorId | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.9 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Match incoming packet frame with specified DHCP option 60 vendorId value. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchDhcpOpt61ClientId | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.10 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Match incoming packet frame with specified DHCP option 61 clientId value. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchDhcpOpt61ClientIdMacAddr | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.11 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Match incoming packet frame with specified DHCP option 61 MAC address. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchDhcpOpt82RemoteId | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.12 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Match incoming packet frame with specified DHCP option 82 remoteId value. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchUserBits | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.13 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current Match incoming packet frame with specified user defined bits. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchUserMask | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.14 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current This mask value identifies the portion of msanIsaTalPatternMatchUserBits that is compared with input packet. Empty string indicates that parameter has not been defined. | |||||||||||||||||||||
| CmsanIsaTalPatternMatchLoginMask | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.15 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current Login mask for the current pattern match. This is used to generate the UserId.
| |||||||||||||||||||||
| CmsanIsaTalPatternMatchRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.109.7.1.16 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows
in this table.
Its semantics are the same as those for the RowStatus textual
convention specified for SNMPv2.
A new row is created using createAndWait(5)
[createAndGo(4) is not supported]
The value active(1) activates the entry.
Setting this object to destroy6) will remove this entry. | |||||||||||||||||||||
| TmsanIsaTalPortPatternMatchTable | 1.3.6.1.4.1.1332.1.1.5.3.109.8 | NA | |||||||||||||||||||
table · not-accessible · current A connection between Pattern Matches and device ports. An entry is created in this table whenever a pattern match need to be attached to a downlink port. | |||||||||||||||||||||
| RmsanIsaTalPortPatternMatchEntry | 1.3.6.1.4.1.1332.1.1.5.3.109.8.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table contains the a unique pattern match on a port along with the loginmask to identify the user login packets. | |||||||||||||||||||||
| CmsanIsaTalPortPatternMatchRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.109.8.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a row in this table. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| NmsanSync | 1.3.6.1.4.1.1332.1.1.5.3.110 | ||||||||||||||||||||
| NmsanSyncGlobal | 1.3.6.1.4.1.1332.1.1.5.3.110.1 | ||||||||||||||||||||
| TmsanSyncTable | 1.3.6.1.4.1.1332.1.1.5.3.110.2 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanSyncEntry | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1 | NA | |||||||||||||||||||
| CmsanSyncBoardPosition | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.1 | INTEGER (1..20) | NA | ||||||||||||||||||
column · INTEGER (1..20) · not-accessible · current Central ethernet board position. | |||||||||||||||||||||
| CmsanSyncSourcePriority | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.2 | INTEGER (1..6) | NA | ||||||||||||||||||
column · INTEGER (1..6) · not-accessible · current Synchronization source priority: 1-first priority, 2-second priority..... | |||||||||||||||||||||
| CmsanSyncSourceType | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Synchronization source type: ext-2mhz(4) - synchronization on extended source 2MHz, ext-10mhz(5) - synchronization on extended source 10MHz, ext-1hz(6) - synchronization on extended source 1Hz, mlvds-bp(8) - synchronization on MLVDS, pps-bp(14) - synchronization on PPS, ptp-eth(15)- synchronization on PtP Ethernet, sync-eth(16) - synchronization on Synchronous Ethernet, free-run(40) - free-run synchronization
| |||||||||||||||||||||
| CmsanSyncSourceId | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Synchronization source identity. msanSyncSourceId can be used when msanSyncSourceType has one of values: - ext-2mhz(4), - ext-10mhz(5), - ext-1hz(6), - mlvds-bp(8), - pps-bp(14), - free-run(40) msanSyncSourceId can be set only to input-1(1), when msanSyncSourceType is pps-bp(14) or free-run(40).
| |||||||||||||||||||||
| CmsanSyncSourceEthPortId | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.5 | InterfaceIndex | RW | ||||||||||||||||||
column · InterfaceIndex · read-write · current Synchronization source ethernet Port Id (value of ifIndex). msanSyncSourceEthPortId can be used, when msanSyncSourceType has ptp-eth(15) or sync-eth(16) value. | |||||||||||||||||||||
| CmsanSyncDestinationType | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Synchronization destination type: local(0) - synchronization signal is used only on local board global(0) - synchronization signal is sent to MLVDS bus
| |||||||||||||||||||||
| CmsanSyncDestinationMlvdsId | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Destination MLVDS bus Identity. This parameter is used when msanSyncDestinationType has global(1) value.
| |||||||||||||||||||||
| CmsanSyncSourceSuitability | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Source Suitability.
| |||||||||||||||||||||
| CmsanSyncSourceActivity | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Source Activity .
| |||||||||||||||||||||
| CmsanSyncRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.110.2.1.10 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. For row activation next terms must be defined - msanSyncSourceType - msanSyncSourceMlvdsId or msanSyncSourcePortId - msanSyncDestionationType - msanSyncDestionaMlvdsId if msanSyncDestionType=global(10) | |||||||||||||||||||||
| NmsanOnu | 1.3.6.1.4.1.1332.1.1.5.3.111 | ||||||||||||||||||||
| NmsanOnuGlobal | 1.3.6.1.4.1.1332.1.1.5.3.111.1 | ||||||||||||||||||||
| SmsanOnuUpgradeMethodManualStart | 1.3.6.1.4.1.1332.1.1.5.3.111.1.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Start ONU manual upgrade method according to configuration in msanOnuUpgradeTable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanOnuAuthMetod | 1.3.6.1.4.1.1332.1.1.5.3.111.1.10 | INTEGER | RW | serial(1) | |||||||||||||||||
scalar · INTEGER · read-write · current ONU authentication method.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanOnuAuthAutoLearning | 1.3.6.1.4.1.1332.1.1.5.3.111.1.11 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current ONU serial number auto learning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanOnuBlackListChangeCnt | 1.3.6.1.4.1.1332.1.1.5.3.111.1.13 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current ONU Blacklist change counter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanOnuIfOperStatusChangeCnt | 1.3.6.1.4.1.1332.1.1.5.3.111.1.14 | Integer32 | RO | 42 | |||||||||||||||||
scalar · Integer32 · read-only · current ONUs interface operational status change counter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanOnuDataEncryption | 1.3.6.1.4.1.1332.1.1.5.3.111.1.15 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current ONU/GEM downstream data encryption.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmsanOnuDefaultConfigFileGet | 1.3.6.1.4.1.1332.1.1.5.3.111.1.16 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current msanOnuDefaultConfigFileGet parameter is used to start transfer of ONU default config file from external tftp or ftp server to local file. Next syntax must be used for tftp or ftp transfer: tftp://<IP>|<hostname>[:<port>]/[<path>/]<remote_file_name> [<local_file_name>] ftp://<usr>[:<pass>]@<IP>|<hostname>[:<port>]/[<path>/]<remote_file_name> [<local_file_name>] | |||||||||||||||||||||
| SmsanOnuXgsAuthMetod | 1.3.6.1.4.1.1332.1.1.5.3.111.1.17 | INTEGER | RW | serial(1) | |||||||||||||||||
scalar · INTEGER · read-write · current XGSPON ONU authentication method.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOnuCfgTable | 1.3.6.1.4.1.1332.1.1.5.3.111.2 | NA | |||||||||||||||||||
| RmsanOnuCfgEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1 | NA | |||||||||||||||||||
row · not-accessible · current In case of GPON access blade, ifIndex (msanOnuCfgifIndex) for ONU interface (ifDescr=0/x/y) is calculated with formula: ifIndex=max_olt_port_number(8 or 16)+(x-1)*128+y
| |||||||||||||||||||||
| CmsanOnuCfgIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU interface (from ifTable). | |||||||||||||||||||||
| CmsanOnuCfgPassword | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.2 | DisplayString (SIZE (0..20)) | RC | | |||||||||||||||||
column · DisplayString (SIZE (0..20)) · read-create · current The expected password of the ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgEnablePm | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.3 | INTEGER | RC | disable(2) | |||||||||||||||||
column · INTEGER · read-create · current ONU PM (Performance Management) collection.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgSerialNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.4 | DisplayString (SIZE (0..12)) | RC | ISKT30F09C20 | |||||||||||||||||
column · DisplayString (SIZE (0..12)) · read-create · current The expected serial number (12 bytes), which is unique for each ONU. It is defined in ITU-T G.984.3 and contains the vendor id and version number. The first four bytes are an ASCII encoded vendor ID four letter mnemonic. The next eight bytes are an ASCII encoded version number (four hex values). Example: ISKT01C2AA5B To delete serial number use empty string. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgAdminState | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.5 | INTEGER | RC | enable(1) | |||||||||||||||||
column · INTEGER · read-create · current This attribute enable(1) and disable(2) the functions performed by this managed entity. When the administrative state is set to disable(lock), all user functions are blocked, and alarms, TCAs and AVCs for this managed entity and all dependent managed entities are no longer generated.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuDhcpMode | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.6 | INTEGER | RC | enable(1) | |||||||||||||||||
column · INTEGER · read-create · current ONU DHCP client mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.7 | IpAddress | RC | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-create · current The current IP address of the ONU. This column can be written only if the DHCP mode is set to false. If the DHCP mode is set to true, this column can NOT be written. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuIPMask | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.8 | IpAddress | RC | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-create · current The current IP Mask of the ONU. This column can be written only if the DHCP mode is set to false. If the DHCP mode is set to true, this column can NOT be written. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuDefaultGateway | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.9 | IpAddress | RC | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-create · current The current default gateway of the ONU. This column can be written only if the DHCP mode is set to false. If the DHCP mode is set to true, this column can NOT be written. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuReset | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.10 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Set this option to ¡enable¡to initiate a reboot action on the ONU. This column can be used to reboot the ONU after Software upgrade. After the reboot command is sent to the ONU, this column is set to ¡disable¡again by the OLT application.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuResetBackupImage | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.11 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Set this option to 'enable' to initiate a reboot action on the ONU and switch to a backup SW image.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgDefaultConfigFile | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.12 | DisplayString | RC | | |||||||||||||||||
column · DisplayString · read-create · current ONU config default file (this is reference to msanOnuDefaultConfigFileName). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgSendConfig | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.13 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Send default config file and config attributes to ONU.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgSendConfigStatus | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.14 | INTEGER | RO | notStarted(6) | |||||||||||||||||
column · INTEGER · read-only · current Status of sending default config file and config attributes to ONU.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuResync | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.15 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Re-sync OMCI MIB
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuResetFactoryDefault | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.16 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Set this option to 'enable' to initiate a reboot to factory default action on the ONU.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgPowerMeasurementsStart | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.17 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Start ONU/OLT Rx/Tx Power Measurements
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgRegistrationId | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.18 | DisplayString (SIZE (0..36)) | RC | | |||||||||||||||||
column · DisplayString (SIZE (0..36)) · read-create · current The expected Registrationid of the XGSPON ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuPrimaryDnsIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.19 | IpAddress | RC | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-create · current The Primary DNS server IP. This parameter can be written only if the DHCP mode is set to false. If the DHCP mode is set to true, this column can NOT be written. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgOnuSecondaryDnsIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.20 | IpAddress | RC | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-create · current The Secondary DNS server IP. This parameter can be written only if the DHCP mode is set to false. If the DHCP mode is set to true, this column can NOT be written. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuCfgDataEncryption | 1.3.6.1.4.1.1332.1.1.5.3.111.2.1.21 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current ONU/GEM downstream data encryption.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOnuInfoTable | 1.3.6.1.4.1.1332.1.1.5.3.111.3 | NA | |||||||||||||||||||
| RmsanOnuInfoEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1 | NA | |||||||||||||||||||
| CmsanOnuInfoIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU interface (from ifTable). | |||||||||||||||||||||
| CmsanOnuInfoPrimaryStatus | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.2 | INTEGER | RO | inactive(1) | |||||||||||||||||
column · INTEGER · read-only · current invalid(0), inactive(1), activatePending(2), active(3),deactivatePending(4), disablePending(5), disabled(6)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoEqualizationDelay | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.3 | Unsigned32 | RO | 2069243 | |||||||||||||||||
column · Unsigned32 · read-only · current Equalization delay for display. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoPowerLevel | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.4 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Power level. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoVendorId | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.5 | DisplayString (SIZE (4)) | RO | | |||||||||||||||||
column · DisplayString (SIZE (4)) · read-only · current This attribute identifies the vendor of the ONT.It is the same as the four most significant bytes of the ONT serial number as specified in ITU-T Rec. G.984.3. (R) (mandatory) (4 bytes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoVersion | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.7 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current This attribute identifies the version of the ONT as defined by the vendor. Then character value ¡°0¡± indicates that version information is not available or applicable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTrafficManagementOption | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.8 | INTEGER | RO | priorityControlledAndFlexiblyScheduledUpstreamT… | |||||||||||||||||
column · INTEGER · read-only · current This attribute identifies the upstream traffic management function implemented in the ONT. There are two options: 0 Priority controlled and flexibly scheduled upstream traffic. The traffic scheduler and priority queue mechanism are used for upstream traffic. 1 Rate controlled upstream traffic. The maximum upstream traffic of each individual connection is guaranteed
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOperState | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.9 | INTEGER | RO | disabled(2) | |||||||||||||||||
column · INTEGER · read-only · current This attribute reports whether the managed entity is currently capable of performing its function.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoEquipmentId | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.10 | OCTET STRING (SIZE (20)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (20)) · read-only · current This attribute may be used to identify the specific type of ONT. In North America, this may be the equipment CLEI code. (R) (optional) (20 bytes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOmccVersion | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.11 | INTEGER | RO | g-984-4(128) | |||||||||||||||||
column · INTEGER · read-only · current This attribute identifies the version of the OMCC protocol being used by the ONT. This allows the OLT to manage a network with ONTs that support different OMCC versions. Release levels of G.984.4 may be supported with the following code points: 0x80 G.984.4 06/04. Note: for historic reasons, this codepoint may also appear in ONTs that support later versions of G.984.4. 0x81 G.984.4 amd 1 (06/05) ITU-T Rec. G.984.4 (02/2008) 51 0x82 G.984.4 amd 2 (03/06) 0x83 G.984.4 amd 3 (12/06) 0x84 G.984.4 2007-2008 current draft (R) (mandatory) (1 byte)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuHardwareType | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.12 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current Most significant byte of vendor product code which provides a vendor-specific product code for the ONT.(R) (optional) (2 bytes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoHardwareRevision | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.13 | Unsigned32 | RO | obsolete | |||||||||||||||||
column · Unsigned32 · read-only · obsolete Least significant byte of vendor product code which provides a vendor-specific product code or the ONT.(R) (optional) (2 bytes). | |||||||||||||||||||||
| CmsanOnuInfoSecurityCapability | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.14 | Unsigned32 (1..255) | RO | 0 | |||||||||||||||||
column · Unsigned32 (1..255) · read-only · current This attribute advertises the security capabilities of the ONT. The following codepoints are defined: 1 Reserved 2 AES 3..255 Reserved (R) (mandatory) (1 byte). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTotalPriorityQueueNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.15 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current This attribute reports the total number of priority queues that are not associated with a circuit pack, but with the ONT in its entirety. The maximum value is 0x0FFF. Upon ME instantiation, he ONT sets this attribute to the value that represents its capabilities. (R) (mandatory) (2 bytes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTotalTrafficSchedulerNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.16 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current This attribute reports the total number of traffic schedulers that are not associated with a circuit pack, but with the ONT in its entirety. The ONT supports null function, HOL scheduling and WRR from the priority control and guarantee of minimum rate control points of view, respectively. If the ONT has no traffic schedulers, this attribute is 0. (R) (mandatory) (1 byte). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTotalGemPortNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.17 | Unsigned32 (0..4095) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..4095) · read-only · current This attribute reports the total number of GEM port-IDs supported by the ONT. The maximum value is 0x0FFF. Upon ME instantiation, the ONT sets this attribute to the value that represents its capabilities. (R) (optional) (2 bytes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTotalTcontNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.18 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current This attribute reports the total number of T-CONTs supported by the ONT. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTotalEthernetUniNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.19 | Unsigned32 | RO | 2 | |||||||||||||||||
column · Unsigned32 · read-only · current The number of Ethernet UNI ports. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTotalPotsUniNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.20 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current The number of POTS UNI ports. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoSysUpTime | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.21 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current This attribute counts the 10 ms intervals since the ONT was last initialized. It rolls over to 0 when full. (See RFC 1213.) (R) (optional) (4 bytes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuImageInstance0Version | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.22 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current This attribute identifies the version of the ONT as defined by the vendor. Then character value ¡°0¡± indicates that version information is not available or applicable. (R) (mandatory) (14 bytes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuImageInstance0Valid | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.23 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The valid flag of ONU image instance 0. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuImageInstance0Activate | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.24 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The activate flag of ONU image instance 0. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuImageInstance0Commit | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.25 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The commit flag of ONU image instance 0. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuImageInstance1Version | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.26 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current This attribute identifies the version of the ONT as defined by the vendor. Then character value ¡°0¡± indicates that version information is not available or applicable. (R) (mandatory) (14 bytes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuImageInstance1Valid | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.27 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The valid flag of ONU image instance 1 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuImageInstance1Activate | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.28 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The activate flag of ONU image instance 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuImageInstance1Commit | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.29 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The commit flag of ONU image instance 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuMacAddress | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.30 | MacAddress | RO | 54:c2:50:f0:9c:20 | |||||||||||||||||
column · MacAddress · read-only · current The MAC address of the ONU in hexadecimal format. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuDhcpMode | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.31 | TruthValue | RO | 1 | |||||||||||||||||
column · TruthValue · read-only · current ONU DHCP mode: 1 Enabled 2 Disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.32 | IpAddress | RO | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-only · current The current IP address of the ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuIpMask | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.33 | IpAddress | RO | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-only · current The current IP Mask of the ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuDefaultGateway | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.34 | IpAddress | RO | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-only · current The current default gateway of the ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOnuFastLeaveCapability | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.35 | Unsigned32 (0..16) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..16) · read-only · current This attribute specifies Fast leave capability. It¡¯s carried in a proprietary OMCI remote DEBUG ME, Bit value 0 not support Bit value 1 support Bit 0 fast leave in CTC distributed mode Bit 1 non fast leave in CTC distributed mode Bit 2 fast leave in CTC controllable mode Bit 3 non fast leave in CTC controllable mode Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoSerialNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.36 | DisplayString (SIZE (12)) | RO | ISKT30F09C20 | |||||||||||||||||
column · DisplayString (SIZE (12)) · read-only · current Current serial number, which is unique for each ONU. It is defined in ITU-T G.984.3 and contains the vendor id and version number. The first four bytes are an ASCII encoded vendor ID four letter mnemonic. The next eight bytes are an ASCII encoded version number (four hex values). Example: ISKT01C2AA5B Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoPassword | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.37 | DisplayString (SIZE (0..20)) | RO | | |||||||||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Received password of the ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoRxPower | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.38 | Integer32 | RO | -9900 | |||||||||||||||||
column · Integer32 · read-only · current ONU receive (Rx) power measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTxPower | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.39 | Integer32 | RO | -9900 | |||||||||||||||||
column · Integer32 · read-only · current ONU transmit (Tx) power measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoOltRxPower | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.40 | Integer32 | RO | -9900 | |||||||||||||||||
column · Integer32 · read-only · current OLT receive (Rx) power measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoTemp | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.41 | Integer32 | RO | 62 | |||||||||||||||||
column · Integer32 · read-only · current ONU current temperature (in Celsius).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoPowerMeasurementsStarted | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.42 | DisplayString (SIZE (0..20)) | RO | no valid time | |||||||||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Info when Rx/Tx power measurements were started. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoDistance | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.43 | Gauge32 | RO | 0 | |||||||||||||||||
column · Gauge32 · read-only · current ONU distance in metre.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoDeactivateReason | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.44 | DisplayString | RO | dying gasp | |||||||||||||||||
column · DisplayString · read-only · current ONU deactivate reason. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuInfoRegistrationid | 1.3.6.1.4.1.1332.1.1.5.3.111.3.1.45 | DisplayString (SIZE (0..36)) | RO | | |||||||||||||||||
column · DisplayString (SIZE (0..36)) · read-only · current Received Registrationid of the XGSPON ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOnuUpgradeTable | 1.3.6.1.4.1.1332.1.1.5.3.111.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuUpgradeEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1 | NA | |||||||||||||||||||
| CmsanOnuUpgradeMethod | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current 1 Manual - in which the EMS initiates upgrade operation.
Manual upgrade procedure starts when global parameter msanOnuUpgradeMethodManualStart
is set to enable.
2 Scheduled - in which the EMS specifies the ONU list and the time when the upgrade
should start. Only one scheduled task entry can exist in the table, and it is always valid even
after their execution.
3 Automatic - in which the ONU is upgraded automatically when it is
discovered. Only one automatic task entry can exist in the
table, and it is always valid even after its execution.
| |||||||||||||||||||||
| CmsanOnuUpgradeOption | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.2 | INTEGER | RO | normal(1) | |||||||||||||||||
column · INTEGER · read-only · current ONU upgrade option: 1 Normal. If the target version is newer than the current version, then the image download will start. 2 Forced. The image download will always start.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeRebootMode | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.3 | INTEGER | RW | automatic(1) | |||||||||||||||||
column · INTEGER · read-write · current It defines the reboot action after the image is downloaded to the ONU:
1 - Automatic. ONU will be rebooted during image activation. The complete upgrade
procedure will be executed automatically: download -> activate (reboot) -> commit.
2 - Manual. The following upgrade procedure will be executed: download -> commit. The
ONU can be rebooted via onuReset of ONU configuration table.
3 - Scheduled. The ONU will be rebooted automatically at onuUpgradeRebootScheduledTime. The
following upgrade procedure will be executed: download -> commit -> activate (reboot) at
onuUpgradeRebootScheduledTime.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeImageInstance | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.4 | Integer32 | RW | obsolete | |||||||||||||||||
column · Integer32 · read-write · obsolete ONU image instance selection: 1 Automatic. The instance which is not committed will be upgraded. For ONU which has only one image instance, OLT will always upgrade this image instance 0 | |||||||||||||||||||||
| CmsanOnuUpgradeScheduledTime | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.5 | DisplayString | RW | 23:30:00 | |||||||||||||||||
column · DisplayString · read-write · current The time at which the ONU will be upgraded scheduledly. This column is used only if the msanOnuUpgradeMethod is set to 2 - Scheduled. The format of the string is hh:mm:ss which means the upgrade can be repeated every 24 hours.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeRebootScheduledTime | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.6 | DisplayString | RW | 23:30:00 | |||||||||||||||||
column · DisplayString · read-write · current The time at which the ONU will be rebooted. This column is used only if the msanOnuUpgradeRebootMode is set to 3, Scheduled. The format of the string is hh:mm:ss which means the reboot can be repeated every 24 hours after a successful upgrade. The reboot on a particular ONU should not happen if there is no any actual upgrade on it.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeParticipantPortListBitMap | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.7 | OCTET STRING (SIZE (0..2048)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-write · current ONU upgrade participant port list bit map.To include an ONU in upgrade, set the corresponding bit to 1. It's assumed that each slot has 8 or 16 OLT PON ports and each OLT PON port has 128 ONUs.Nonexist ports in the port list bit map should be reserved and set to 0 if the actual capacity of PON ports and ONUs of the line card in the slot is less than the above maximum assumption | |||||||||||||||||||||
| CmsanOnuUpgradeProgressDownloadPortListBitMap | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.8 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current ONU upgrade progress download port list bit map. Since an ONU enters the image download stage, the corresponding bit representing this ONU will remain as 1. It's assumed that each slot has 8 or 16 OLT PON ports and each OLT PON port has 128 ONUs.Nonexist ports in the port list bit map should be reserved and set to 0 if the actual capacity of PON ports and ONUs of the line card in the slot is less than the above maximum assumption | |||||||||||||||||||||
| CmsanOnuUpgradeProgressActivatePortListBitMap | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.9 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current ONU upgrade progress activate port list bit map. Since an ONU enters image activate stage, the corresponding bit representing this ONU will remain as 1. It's assumed that each slot has 8 or 16 OLT PON ports and each OLT PON port has 128 ONUs.Nonexist ports in the port list bit map should be reserved and set to 0 if the actual capacity of PON ports and ONUs of the line card in the slot is less than the above maximum assumption | |||||||||||||||||||||
| CmsanOnuUpgradeProgressCommitPortListBitMap | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.10 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current ONU upgrade progress commit port list bit map. Since an ONU enters image commit stage, the corresponding bit representing this ONU will remain as 1. It's assumed that each slot has 8 or 16 OLT PON ports and each OLT PON port has 128 ONUs.Nonexist ports in the port list bit map should be reserved and set to 0 if the actual capacity of PON ports and ONUs of the line card in the slot is less than the above maximum assumption | |||||||||||||||||||||
| CmsanOnuUpgradeProgressFinalPortListBitMap | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.11 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current ONU upgrade progress final port list bit map. Whenever the upgrade procedure for an ONU is finished, regardless of success or failure, the corresponding bit representing this ONU will become 1. It's assumed that each slot has 8 or 16 OLT PON ports and each OLT PON port has 128 ONUs.Nonexist ports in the port list bit map should be reserved and set to 0 if the actual capacity of PON ports and ONUs of the line card in the slot is less than the above maximum assumption | |||||||||||||||||||||
| CmsanOnuUpgradeResultFinalPortListBitMap | 1.3.6.1.4.1.1332.1.1.5.3.111.4.1.12 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current ONU upgrade result port list bit map. Whenever an ONU encounters failure in any stage, then the corresponding bit representing this ONU will become 1, and the upgrade procedure won't proceed to the next stage for this particular ONU. It's assumed that each slot has 8 or 16 OLT PON ports and each OLT PON port has 128 ONUs.Nonexist ports in the port list bit map should be reserved and set to 0 if the actual capacity of PON ports and ONUs of the line card in the slot is less than the above maximum assumption | |||||||||||||||||||||
| TmsanOnuUpgradeHwTypeTable | 1.3.6.1.4.1.1332.1.1.5.3.111.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuUpgradeHwTypeEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeVendorId | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.1 | DisplayString (SIZE (4)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (4)) · not-accessible · current Description. | |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeHwType | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current ONU model which need firmware upgrade. | |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeMethod | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.3 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Upgrade method: 1 Manual 2 Scheduled 3 Automatic.
| |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeHwRevision | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.4 | DisplayString (SIZE (0..63)) | RW | obsolete | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · obsolete ONU upgrade hardware revision. | |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeFwRevision | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.5 | DisplayString (SIZE (0..28)) | RW | 1.1.1703 | |||||||||||||||||
column · DisplayString (SIZE (0..28)) · read-write · current ONU upgrade firmware revision. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeImageName | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.6 | DisplayString (SIZE (0..256)) | RW | Innbox-X24-X24_10-Generic-OPTICAL-1.1.1703-1.10… | |||||||||||||||||
column · DisplayString (SIZE (0..256)) · read-write · current ONU upgrade image name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeImagePath | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.7 | DisplayString (SIZE (0..112)) | RW | /tftpboot | |||||||||||||||||
column · DisplayString (SIZE (0..112)) · read-write · current ONU upgrade image folder path. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeServerName | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.8 | DisplayString (SIZE (0..16)) | RW | stage-serve | |||||||||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current ONU upgrade server name. This is a parameter msanOnuUpgradeServerName from msanOnuUpgradeServerTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeHwTypeRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.111.5.1.9 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported]. Setting this object to active(1) will activate this entry. Setting this object to destroy(6) will remove this entry. Row can be activated only if msanOnuUpgradeHwTypeImageName and msanOnuUpgradeHwTypeServerName are specified. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOnuVirtGemPortInfoTable | 1.3.6.1.4.1.1332.1.1.5.3.111.6 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuVirtGemPortInfoEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.6.1 | NA | |||||||||||||||||||
| CmsanOnuVirtGemPortInfoIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of Virtual GEM Port (from ifTable). | |||||||||||||||||||||
| CmsanOnuVirtGemPortInfoOltGemPortNo | 1.3.6.1.4.1.1332.1.1.5.3.111.6.1.2 | Gauge32 | RO | 1024 | |||||||||||||||||
column · Gauge32 · read-only · current GEM port no which is assigned dynamically by OLT. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVirtGemPortInfoOltAllocId | 1.3.6.1.4.1.1332.1.1.5.3.111.6.1.3 | Gauge32 | RO | 1024 | |||||||||||||||||
column · Gauge32 · read-only · current Alloc-ID which is assigned dynamically by OLT, a dynamic Alloc-ID is one-to-one mapped to a static T-CONT index. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVirtGemPortInfoTcontIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.6.1.4 | Gauge32 | RO | 1 | |||||||||||||||||
column · Gauge32 · read-only · current Static T-CONT index from ONU's perspective. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOnuVirtGemPortStatTable | 1.3.6.1.4.1.1332.1.1.5.3.111.7 | NA | |||||||||||||||||||
table · not-accessible · current This table displays performance statistics for Virtual Gem Ports. | |||||||||||||||||||||
| RmsanOnuVirtGemPortStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.7.1 | NA | |||||||||||||||||||
row · not-accessible · current Serves as an index for this table. Identifies the 15 interval in which PM was collected. The value 0 identifies the current interval. Value 1 identifies the latest 15 minute interval and value 96 identifies the last 15 minute interval in a a 24 hour period. | |||||||||||||||||||||
| CmsanOnuVirtGemPortStatIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.7.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of Virtual GEM Port (from ifTable). | |||||||||||||||||||||
| CmsanOnuVirtGemPortStatIntervalId | 1.3.6.1.4.1.1332.1.1.5.3.111.7.1.2 | INTEGER (0..96) | NA | ||||||||||||||||||
column · INTEGER (0..96) · not-accessible · current Serves as an index for this table. Identifies the 15 interval in which PM was collected. The value 0 identifies the current interval. Value 1 identifies the latest 15 minute interval and value 96 identifies the last 15 minute interval in a a 24 hour period. | |||||||||||||||||||||
| CmsanOnuVirtGemPortStatInFrames | 1.3.6.1.4.1.1332.1.1.5.3.111.7.1.3 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The total number of gpon frames received on the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVirtGemPortStatInOctets | 1.3.6.1.4.1.1332.1.1.5.3.111.7.1.4 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The total number of octets received on the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVirtGemPortStatOutFrames | 1.3.6.1.4.1.1332.1.1.5.3.111.7.1.5 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The total number of gpon frames transmitted out of the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuVirtGemPortStatOutOctets | 1.3.6.1.4.1.1332.1.1.5.3.111.7.1.6 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The total number of octets transmitted out of the interface Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOnuBlackListTable | 1.3.6.1.4.1.1332.1.1.5.3.111.8 | NA | |||||||||||||||||||
table · not-accessible · current Table for displaying the ONUs in black list per OLT ports. | |||||||||||||||||||||
| RmsanOnuBlackListEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.8.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanOnuBlackListIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.8.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of OLT port (from ifTable). | |||||||||||||||||||||
| CmsanOnuBlackListSerialNumber | 1.3.6.1.4.1.1332.1.1.5.3.111.8.1.2 | DisplayString (SIZE (12)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (12)) · not-accessible · current The serial number. Index for this table. The serial number is unique for each ONT. It is defined in ITU-T G.984.3 and contains the vendor id and version number. The first four bytes are an ASCII encoded vendor ID four letter mnemonic. The next eight bytes are an ASCII encoded version number (four hex values). Example: ISKT01C2AA5B | |||||||||||||||||||||
| CmsanOnuBlackListPassword | 1.3.6.1.4.1.1332.1.1.5.3.111.8.1.3 | DisplayString (SIZE (0..20)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Received ONU password. | |||||||||||||||||||||
| CmsanOnuBlackListCause | 1.3.6.1.4.1.1332.1.1.5.3.111.8.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The cause of entering black list.
| |||||||||||||||||||||
| CmsanOnuBlackListRegistrationid | 1.3.6.1.4.1.1332.1.1.5.3.111.8.1.5 | DisplayString (SIZE (0..36)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..36)) · read-only · current Received Registrationid of XGSPON ONU password. | |||||||||||||||||||||
| TmsanOnuUpgradeServerTable | 1.3.6.1.4.1.1332.1.1.5.3.111.9 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuUpgradeServerEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.9.1 | NA | |||||||||||||||||||
| CmsanOnuUpgradeServerName | 1.3.6.1.4.1.1332.1.1.5.3.111.9.1.1 | DisplayString (SIZE (0..16)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (0..16)) · not-accessible · current ONU SW upgrade server name. | |||||||||||||||||||||
| CmsanOnuUpgradeServerIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.111.9.1.2 | IpAddress | RW | 10.248.28.5 | |||||||||||||||||
column · IpAddress · read-write · current ONU SW upgrade server IP address. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeServerUserName | 1.3.6.1.4.1.1332.1.1.5.3.111.9.1.3 | DisplayString (SIZE (0..16)) | RW | anonymous | |||||||||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current Username used in ONU SW upgrade protocol. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeServerUserPassword | 1.3.6.1.4.1.1332.1.1.5.3.111.9.1.4 | DisplayString (SIZE (0..32)) | RW | anonymous | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current User password used in ONU SW upgrade protocol. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeServerProtocol | 1.3.6.1.4.1.1332.1.1.5.3.111.9.1.5 | INTEGER | RW | ftp(1) | |||||||||||||||||
column · INTEGER · read-write · current ONU SW upgrade protocol type.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeServerProtocolPortId | 1.3.6.1.4.1.1332.1.1.5.3.111.9.1.6 | Integer32 (0..65535) | RW | 80 | |||||||||||||||||
column · Integer32 (0..65535) · read-write · current ONU SW upgrade protocol port number. If value is set to -1, standard protocol number is used. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOnuUpgradeServerRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.111.9.1.7 | RowStatus | RW | 1 | |||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. For row activation parameter msanOnuSwUpgradeServerIpAddress must be defined. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOnuEthPortInfoTable | 1.3.6.1.4.1.1332.1.1.5.3.111.10 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuEthPortInfoEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.10.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanOnuEthPortInfoOnuIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.10.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU (from ifTable). | |||||||||||||||||||||
| CmsanOnuEthPortInfoUniId | 1.3.6.1.4.1.1332.1.1.5.3.111.10.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current ONU Ethernet Port (UNI) identifier. | |||||||||||||||||||||
| CmsanOnuEthPortInfoAdminState | 1.3.6.1.4.1.1332.1.1.5.3.111.10.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ONU eth port (UNI) administration state.
| |||||||||||||||||||||
| CmsanOnuEthPortInfoOperState | 1.3.6.1.4.1.1332.1.1.5.3.111.10.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ONU eth port (UNI) operational state.
| |||||||||||||||||||||
| CmsanOnuEthPortInfoType | 1.3.6.1.4.1.1332.1.1.5.3.111.10.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Type of ONU eth port (UNI).
| |||||||||||||||||||||
| CmsanOnuEthPortInfoSpeed | 1.3.6.1.4.1.1332.1.1.5.3.111.10.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Speed of ONU eth port (UNI).
| |||||||||||||||||||||
| CmsanOnuEthPortInfoDuplex | 1.3.6.1.4.1.1332.1.1.5.3.111.10.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Duplex mode of ONU eth port (UNI).
| |||||||||||||||||||||
| TmsanOnuEthPortStatTable | 1.3.6.1.4.1.1332.1.1.5.3.111.11 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuEthPortStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanOnuEthPortStatOnuIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU (from ifTable). | |||||||||||||||||||||
| CmsanOnuEthPortStatUniId | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current ONU Ethernet Port (UNI) identifier. | |||||||||||||||||||||
| CmsanOnuEthPortStatIntervalId | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.3 | INTEGER (0..96) | NA | ||||||||||||||||||
column · INTEGER (0..96) · not-accessible · current Serves as an index for this table. Identifies the 15 interval in which PM was collected. The value 0 identifies the current interval. Value 1 identifies the latest 15 minute interval and value 96 identifies the last 15 minute interval in a a 24 hour period. | |||||||||||||||||||||
| CmsanOnuEthPortStatInPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The total number of received ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInUcastPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.5 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received unicast ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInMcastPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.6 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received multicast ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInBcastPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.7 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received broadcast ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInOctets | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.8 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The total number of octets received on the interface, including framing characters.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInPkts64Octets | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.9 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received packets (including bad packets) that were 64 octets long, excluding framing bitsbut including FCS.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInPkts64to127Octets | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.10 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received packets (including bad packets) that were 65..127 octets long, excluding framing bits but including FCS.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInPkts128to255Octets | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.11 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received ethernet packets that were between 128 and 255 octets in length.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInPkts256to511Octets | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.12 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received ethernet packets that were between 256 and 511 octets in length.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInPkts512to1023Octets | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.13 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received ethernet packets that were between 256 and 511 octets in length.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInPkts1024to1518Octets | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.14 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received ethernet packets that were between 512 and 1518 octets in length.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInDiscards | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.15 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of discarded received ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInUndersizePkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.16 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of packets received that were less than 64 octets long and were otherwise well formed.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInOversizePkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.17 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInFragments | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.18 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of packets received that were less than 64 octets long, excluding framing bits but including FCS octets, and had either a bad Packet check sequence (FCS) with an integral number of octets (FCS error) or a bad FCS with a non-integral number of octets (alignment error). It is entirely normal for this attribute to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInJabbers | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.19 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of packets received that were longer than 1518 octets, excluding framing bits but including FCS octets, and had either a bad Packet check sequence (FCS) with an integral number of octets (FCS error) or a bad FCS with a non-integral number of octets (alignment error). The range to detect jabber is between 20 ms and 150 ms.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInFcsErrors | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.20 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of received ethernet packets with FCS error.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInBufferOverflows | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.21 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts the number of times that the receive buffer overflowed.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInAlignmentError | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.22 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts received Packets that were not an integral number of octets in length and did not pass the FCS check.
| |||||||||||||||||||||
| CmsanOnuEthPortStatInInternalMACReceiveError | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.23 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts Packets whose reception failed due to an internal MAC sublayer receive error
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.24 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The total number of transmitted ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutUcastPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.25 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of transmitted unicast ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutMcastPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.26 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of transmitted multicast ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutBcastPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.27 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of transmitted broadcast ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutDiscards | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.28 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of discarded transmitted ethernet packets.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutFcsErrors | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.29 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The number of transmitted ethernet packets with FCS error.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutExcessiveCollisions | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.30 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts Packets whose transmission failed due to excessive collisions.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutLateCollisions | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.31 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts the number of times that a collision was detected later than 512 bit times into the transmission of a packet.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutBufferOverflows | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.32 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts the number of times that the transmit buffer overflowed.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutSingleCollisionPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.33 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts successfully transmitted Packets whose transmission was delayed by exactly one collision.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutMultipleCollisionsPkts | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.34 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts successfully transmitted Packets whose transmission was delayed by more than one collision.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutDeferredTransmission | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.35 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts Packets whose first transmission attempt was delayed because the medium was busy. The count does not include Packets involved in collisions.
| |||||||||||||||||||||
| CmsanOnuEthPortStatOutInternalMACTransmitError | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.36 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts Packets whose transmission failed due to an internal MAC sublayer transmit error.
| |||||||||||||||||||||
| CmsanOnuEthPortStatSQEs | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.37 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts the number of times that the SQE test error message was generated by the PLS sublayer. | |||||||||||||||||||||
| CmsanOnuEthPortStatCarrierSenseError | 1.3.6.1.4.1.1332.1.1.5.3.111.11.1.38 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current This attribute counts the number of times that carrier sense was lost or never asserted when attempting to transmit a Packet. | |||||||||||||||||||||
| TmsanOnuDefaultConfigFileTable | 1.3.6.1.4.1.1332.1.1.5.3.111.12 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuDefaultConfigFileEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.12.1 | NA | |||||||||||||||||||
| CmsanOnuDefaultConfigFileName | 1.3.6.1.4.1.1332.1.1.5.3.111.12.1.1 | DisplayString | NA | ||||||||||||||||||
column · DisplayString · not-accessible · current ONU default config file name. | |||||||||||||||||||||
| CmsanOnuDefaultConfigFileRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.111.12.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to destroy(6) will remove this entry. Read values: active(1). Other values are currently not supported. | |||||||||||||||||||||
| TmsanOnuCfgAttributeTable | 1.3.6.1.4.1.1332.1.1.5.3.111.13 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuCfgAttributeEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.13.1 | NA | |||||||||||||||||||
| CmsanOnuCfgAttributeIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.13.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU interface (from ifTable). | |||||||||||||||||||||
| CmsanOnuCfgAttributeId | 1.3.6.1.4.1.1332.1.1.5.3.111.13.1.3 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Onu Attribute Id | |||||||||||||||||||||
| CmsanOnuCfgAttributeName | 1.3.6.1.4.1.1332.1.1.5.3.111.13.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current ONU config attribute name. | |||||||||||||||||||||
| CmsanOnuCfgAttributeValue | 1.3.6.1.4.1.1332.1.1.5.3.111.13.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current ONU config attribute value | |||||||||||||||||||||
| CmsanOnuCfgAttributeRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.111.13.1.6 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndGo(4). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| TmsanOnuVideoAniPortTable | 1.3.6.1.4.1.1332.1.1.5.3.111.14 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuVideoAniPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.14.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanOnuVideoAniPortOnuIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.14.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU (from ifTable). | |||||||||||||||||||||
| CmsanOnuVideoAniPortAniId | 1.3.6.1.4.1.1332.1.1.5.3.111.14.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current ONU Video ANI Port identifier. | |||||||||||||||||||||
| CmsanOnuVideoAniPortAdminState | 1.3.6.1.4.1.1332.1.1.5.3.111.14.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ONU Video ANI port administration state.
| |||||||||||||||||||||
| CmsanOnuVideoAniPortOperState | 1.3.6.1.4.1.1332.1.1.5.3.111.14.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ONU Video ANI port operational state.
| |||||||||||||||||||||
| CmsanOnuVideoAniPortRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.111.14.1.5 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndGo(4). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| CmsanOnuVideoAniPortTotalOpticalPowerLevel | 1.3.6.1.4.1.1332.1.1.5.3.111.14.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current ONU Video ANI port Total Optical Power Level [dBuW]. Info: -1 defines that value is not available.
| |||||||||||||||||||||
| TmsanOnuVideoUniPortTable | 1.3.6.1.4.1.1332.1.1.5.3.111.15 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuVideoUniPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.15.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanOnuVideoUniPortOnuIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.15.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU (from ifTable). | |||||||||||||||||||||
| CmsanOnuVideoUniPortUniId | 1.3.6.1.4.1.1332.1.1.5.3.111.15.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current ONU Video Ani Port identifier. | |||||||||||||||||||||
| CmsanOnuVideoUniPortAdminState | 1.3.6.1.4.1.1332.1.1.5.3.111.15.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ONU Video UNI port administration state.
| |||||||||||||||||||||
| CmsanOnuVideoUniPortOperState | 1.3.6.1.4.1.1332.1.1.5.3.111.15.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ONU Video UNI port operational state.
| |||||||||||||||||||||
| CmsanOnuVideoUniPortRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.111.15.1.5 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndGo(4). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. | |||||||||||||||||||||
| TmsanOnuEthPortConfTable | 1.3.6.1.4.1.1332.1.1.5.3.111.16 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOnuEthPortConfEntry | 1.3.6.1.4.1.1332.1.1.5.3.111.16.1 | NA | |||||||||||||||||||
row · not-accessible · current Description. | |||||||||||||||||||||
| CmsanOnuEthPortConfOnuIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.111.16.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU (from ifTable). | |||||||||||||||||||||
| CmsanOnuEthPortConfUniId | 1.3.6.1.4.1.1332.1.1.5.3.111.16.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current ONU Ethernet Port (UNI) identifier. | |||||||||||||||||||||
| CmsanOnuEthPortConfAdminState | 1.3.6.1.4.1.1332.1.1.5.3.111.16.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ONU eth port (UNI) administration state forced by OLT side.
| |||||||||||||||||||||
| NmsanOlt | 1.3.6.1.4.1.1332.1.1.5.3.112 | ||||||||||||||||||||
| NmsanOltGlobal | 1.3.6.1.4.1.1332.1.1.5.3.112.1 | ||||||||||||||||||||
| SmsanOltBlackListRefresh | 1.3.6.1.4.1.1332.1.1.5.3.112.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set this option to enable to initiate a blacklist refresh for all OLT ports.
| |||||||||||||||||||||
| SmsanOltProtectSwitchHeartbeatRepetitionDelay | 1.3.6.1.4.1.1332.1.1.5.3.112.1.2 | Integer32 (100..5000) | RW | ||||||||||||||||||
scalar · Integer32 (100..5000) · read-write · current OLT Protection Switching Heartbeat repetition delay.
| |||||||||||||||||||||
| SmsanOltProtectSwitchHeartbeatLossThreshold | 1.3.6.1.4.1.1332.1.1.5.3.112.1.3 | Integer32 (1..10) | RW | ||||||||||||||||||
scalar · Integer32 (1..10) · read-write · current OLT Protection Switching Heartbeat loss threshold. | |||||||||||||||||||||
| TmsanOltPortTable | 1.3.6.1.4.1.1332.1.1.5.3.112.2 | NA | |||||||||||||||||||
| RmsanOltPortEntry | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1 | NA | |||||||||||||||||||
| CmsanOltPortIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of OLT port (from ifTable). | |||||||||||||||||||||
| CmsanOltPortOnuDiscoveryMode | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.5 | INTEGER | RW | autoPeriodic(1) | |||||||||||||||||
column · INTEGER · read-write · current ONU discovery mode: 1 Auto periodic (onuDiscoveryInterval is the period) 2 Manual enabled once then disabled 3 Disabled
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortOnuDiscoveryInterval | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.6 | Unsigned32 (1..3600) | RW | 30 | |||||||||||||||||
column · Unsigned32 (1..3600) · read-write · current ONU discovery interval, i.e., serial Number acquisition interval in seconds. The value ranges from 1 to 3600 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortDbaCycleTime | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.7 | Unsigned32 (2..8) | RW | 8 | |||||||||||||||||
column · Unsigned32 (2..8) · read-write · current Upstream bandwidth assignment cycle time. only support 2ms, 4ms and 8ms. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortLinkMinDistance | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.8 | INTEGER (0..60) | RW | 0 | |||||||||||||||||
column · INTEGER (0..60) · read-write · current Minimum PON link distance. Maximum allowed interval between msanOltPortLinkMinDistance and msanOltPortLinkMaxDistance is 20km.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortLinkMaxDistance | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.9 | INTEGER (0..60) | RW | 20 | |||||||||||||||||
column · INTEGER (0..60) · read-write · current Maximum PON link distance. Maximum allowed interval between msanOltPortLinkMinDistance and msanOltPortLinkMaxDistance is 20km.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortLosThreshold | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.10 | INTEGER (1..10) | RO | 4 | |||||||||||||||||
column · INTEGER (1..10) · read-only · current The number of consecutive upstream frames that had valid alloc id for which no optical signal was received from any ONT on the link. After this many number of frames, a LOS alarm will be raised. WARNING: The default value = 4 is set by G984.3 Standard. Modify for debug purposes only. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortLofThreshold | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.11 | INTEGER (1..10) | RO | 4 | |||||||||||||||||
column · INTEGER (1..10) · read-only · current The number of consecutive upstream frames from an ONT that are lost. After this many number of frames, a LOFi alarm will be raised. WARNING: The default value = 4 is set by G984.3 Standard. Modify for debug purposes only. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortBlackListRefresh | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.12 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Set this option to ¡enable¡to initiate a blacklist refresh for this OLT port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortUsEstAvailTotalBw | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.13 | Integer32 | RO | 1242432 | |||||||||||||||||
column · Integer32 · read-only · current OLT interface estimated available total upstream bandwidth.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortUsEstAvailFixedBw | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.14 | Integer32 | RO | 777088 | |||||||||||||||||
column · Integer32 · read-only · current OLT interface estimated available fixed upstream bandwidth.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortUsActAvailTotalBw | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.15 | Integer32 | RO | 1242432 | |||||||||||||||||
column · Integer32 · read-only · current OLT interface actual available total upstream bandwidth.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortUsActAvailFixedBw | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.16 | Integer32 | RO | 777088 | |||||||||||||||||
column · Integer32 · read-only · current OLT interface actual available total upstream bandwidth.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortEncryptKeyExchange | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.17 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Encryption key exchange.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortEncryptKeyExchangeInterval | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.18 | Integer32 (30..26000) | RW | 10 | |||||||||||||||||
column · Integer32 (30..26000) · read-write · current Encryption key exchange interval.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortTransciverVendorPN | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.19 | DisplayString | RO | OM5270SY201 | |||||||||||||||||
column · DisplayString · read-only · current GPON SFP type Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortRogueOnuDetection | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.20 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Rogue ONU detection.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortOnuPhyPowerLevel | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.21 | INTEGER | RW | normal(1) | |||||||||||||||||
column · INTEGER · read-write · current ONU phy power leveling
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortPowerMeasurementsStart | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.22 | INTEGER | RW | disable(2) | |||||||||||||||||
column · INTEGER · read-write · current Start ONU/OLT Rx/Tx Power Measurements
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortDsFec | 1.3.6.1.4.1.1332.1.1.5.3.112.2.1.23 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Start ONU/OLT Rx/Tx Power Measurements
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOltPortStatTable | 1.3.6.1.4.1.1332.1.1.5.3.112.3 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOltPortStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1 | NA | |||||||||||||||||||
| CmsanOltPortStatIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of OLT interface (from ifTable). | |||||||||||||||||||||
| CmsanOltPortStatIntervalId | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.2 | INTEGER (0..96) | NA | ||||||||||||||||||
column · INTEGER (0..96) · not-accessible · current Serves as an index for this table. Identifies the 15 interval in which PM was collected. The value 0 identifies the current interval. Value 1 identifies the latest 15 minute interval and value 96 identifies the last 15 minute interval in a a 24 hour period. | |||||||||||||||||||||
| CmsanOltPortStatInOmciPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.3 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received OMCI packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInCpuPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.4 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received CPU packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPktsDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.5 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of dropped received packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPktsUndersize | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.6 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packets dropped due to length too short.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPktsOversize | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.7 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packets dropped due to length too long.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPktsCrcError | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.8 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packets dropped due to CRC error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPktsKeyError | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.9 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packets dropped due to Key error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatOutPktsTpidError | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.10 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packet dropped due to TPID error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatOutPktsVidError | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.11 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packet dropped due to VID error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPktsFragmentError | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.12 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packet dropped due to fragmentation error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInGemFrames | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.13 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInGemFramesDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.14 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of corrected received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInGemFramesIdle | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.15 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of idle received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInGemFramesCorrected | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.16 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of corrected received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInGemFramesIllegal | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.17 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of illegal received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInAllocationsValid | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.18 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received valid allocations.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInAllocationsInvalid | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.19 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received invalid allocations.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInAllocationsDisabled | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.20 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received disabled allocations.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPloamMsgs | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.21 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPloamMsgsNonIdle | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.22 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received non-idle PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPloamMsgsError | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.23 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received PLOAM (physical layer operations and maintenance) messages with errors.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInPloamMsgsDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.24 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of discarded PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInFecCodewords | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.25 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received FEC (Forward error correction) codewords.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInFecCodewordsUncorrected | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.26 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received uncorrected FEC (Forward error correction) codewords.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInBip8Bytes | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.27 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received bytes protected by Bip8.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatInBip8Errors | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.28 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received Bip8 errors.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatOutOmciPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.29 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Transmitted OMCI packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatOutCpuPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.30 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Transmitted CPU packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatOutPktsDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.31 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of dropped transmitted packets because of illegal length.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatOutGemFrames | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.32 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Transmitted GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortStatOutPloamMsgs | 1.3.6.1.4.1.1332.1.1.5.3.112.3.1.33 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of transmitted PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOltOnuPortStatTable | 1.3.6.1.4.1.1332.1.1.5.3.112.4 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOltOnuPortStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1 | NA | |||||||||||||||||||
| CmsanOltOnuPortStatIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of ONU interface (from ifTable). | |||||||||||||||||||||
| CmsanOltOnuPortStatInFecCodewords | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.2 | Counter64 | RO | 45525586780 | |||||||||||||||||
column · Counter64 · read-only · current Number of received FEC (Forward error correction) codewords.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInFecBytesCorrected | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.3 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received corrected FEC (Forward error correction) bytes.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInFecCodewordsCorrected | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.4 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received corrected FEC (Forward error correction) codewords.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInFecCodewordsUncorrected | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.5 | Counter64 | RO | 375 | |||||||||||||||||
column · Counter64 · read-only · current Number of received uncorrected FEC (Forward error correction) codewords.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInBip8Bytes | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.6 | Counter64 | RO | 2438639796646 | |||||||||||||||||
column · Counter64 · read-only · current Number of received bytes protected by Bip8.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInBip8Errors | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.7 | Counter64 | RO | 27 | |||||||||||||||||
column · Counter64 · read-only · current Number of received Bip8 errors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInPloamMsgsCrcError | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.8 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received PLOAM (physical layer operations and maintenance) messages with CRC error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInPloamMsgsNonIdle | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.9 | Counter64 | RO | 1 | |||||||||||||||||
column · Counter64 · read-only · current Number of received non-idle PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInDriftPositive | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.10 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of accumulated positive drift in bits. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInDriftNegative | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.11 | Counter64 | RO | 55696932 | |||||||||||||||||
column · Counter64 · read-only · current Number of accumulated negative drift in bits. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInOmciPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.12 | Counter64 | RO | 1423 | |||||||||||||||||
column · Counter64 · read-only · current Number of received OMCI packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInOmciPktsCrcError | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.13 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received OMCI packets with CRC error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInBerReported | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.14 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Accumulated REI error count reported by the ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInLcdgErrors | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.15 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received LCDG errors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInRdiErrors | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.16 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received RDI errors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatUnreceivedBurst | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.17 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Un-received burst allocated to the ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltOnuPortStatInDelimiterMissEvents | 1.3.6.1.4.1.1332.1.1.5.3.112.4.1.18 | Counter64 | RO | 42 | |||||||||||||||||
column · Counter64 · read-only · current Un-received burst allocated to the ONU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanOltProtectSwitchPairTable | 1.3.6.1.4.1.1332.1.1.5.3.112.5 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOltProtectSwitchPairEntry | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1 | NA | |||||||||||||||||||
| CmsanOltProtectSwitchPairName | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.1 | DisplayString | NA | ||||||||||||||||||
column · DisplayString · not-accessible · current OLT Protection Switching Pair name. | |||||||||||||||||||||
| CmsanOltProtectSwitchPairPrimaryIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current OLT Protection Switching Pair: Index of Primary OLT interface (from ifTable). Value 0 defines that parameter is not set. | |||||||||||||||||||||
| CmsanOltProtectSwitchPairPrimaryIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current OLT Protection Switching Pair: IP Address of Primary OLT interface. | |||||||||||||||||||||
| CmsanOltProtectSwitchPairSecondaryIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current OLT Protection Switching Pair: Index of Secondary OLT interface (from ifTable). Value 0 defines that parameter is not set. | |||||||||||||||||||||
| CmsanOltProtectSwitchPairSecondaryIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current OLT Protection Switching Pair: IP Address of Secondary OLT interface | |||||||||||||||||||||
| CmsanOltProtectSwitchPairType | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current OLT Protection Switching Pair type
| |||||||||||||||||||||
| CmsanOltProtectSwitchPairTimeout | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.7 | Integer32 | RO | obsolete | |||||||||||||||||
column · Integer32 · read-only · obsolete OLT Protection Switching Pair connection timeout.
| |||||||||||||||||||||
| CmsanOltProtectSwitchPairActive | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current OLT Protection Switching Pair currently active side.
| |||||||||||||||||||||
| CmsanOltProtectSwitchPairStatus | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current OLT Protection Switching Pair connection status.
| |||||||||||||||||||||
| CmsanOltProtectSwitchPairSwitchOver | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current OLT Protection Switching Pair switch over action.
| |||||||||||||||||||||
| CmsanOltProtectSwitchPairRowStatus | 1.3.6.1.4.1.1332.1.1.5.3.112.5.1.11 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). For row activation use active(1). For row deletion use destroy(6). Other values are currently not supported. For row activation at least parameters msanOltProtectSwitchPairPrimaryIfIndex and msanOltProtectSwitchPairSecondaryIfIndex must be defined. | |||||||||||||||||||||
| TmsanOltPortSumStatTable | 1.3.6.1.4.1.1332.1.1.5.3.112.6 | NA | |||||||||||||||||||
table · not-accessible · current Description. | |||||||||||||||||||||
| RmsanOltPortSumStatEntry | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1 | NA | |||||||||||||||||||
| CmsanOltPortSumStatIfIndex | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Index of OLT interface (from ifTable). | |||||||||||||||||||||
| CmsanOltPortSumStatInOmciPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.3 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received OMCI packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInCpuPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.4 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received CPU packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPktsDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.5 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of dropped received packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPktsUndersize | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.6 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packets dropped due to length too short.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPktsOversize | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.7 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packets dropped due to length too long.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPktsCrcError | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.8 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packets dropped due to CRC error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPktsKeyError | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.9 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packets dropped due to Key error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatOutPktsTpidError | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.10 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packet dropped due to TPID error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatOutPktsVidError | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.11 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packet dropped due to VID error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPktsFragmentError | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.12 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received packet dropped due to fragmentation error.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInGemFrames | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.13 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInGemFramesDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.14 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of corrected received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInGemFramesIdle | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.15 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of idle received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInGemFramesCorrected | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.16 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of corrected received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInGemFramesIllegal | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.17 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of illegal received GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInAllocationsValid | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.18 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received valid allocations.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInAllocationsInvalid | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.19 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received invalid allocations.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInAllocationsDisabled | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.20 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received disabled allocations.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPloamMsgs | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.21 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPloamMsgsNonIdle | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.22 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received non-idle PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPloamMsgsError | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.23 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received PLOAM (physical layer operations and maintenance) messages with errors.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInPloamMsgsDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.24 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of discarded PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInFecCodewords | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.25 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received FEC (Forward error correction) codewords.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInFecCodewordsUncorrected | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.26 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received uncorrected FEC (Forward error correction) codewords.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInBip8Bytes | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.27 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received bytes protected by Bip8.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatInBip8Errors | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.28 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of received Bip8 errors.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatOutOmciPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.29 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Transmitted OMCI packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatOutCpuPkts | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.30 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Transmitted CPU packets.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatOutPktsDiscarded | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.31 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of dropped transmitted packets because of illegal length.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatOutGemFrames | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.32 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Transmitted GEM frames.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmsanOltPortSumStatOutPloamMsgs | 1.3.6.1.4.1.1332.1.1.5.3.112.6.1.33 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current Number of transmitted PLOAM (physical layer operations and maintenance) messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NmsanTacacsServer | 1.3.6.1.4.1.1332.1.1.5.3.113 | ||||||||||||||||||||
| NmsanTacacsServerGlobal | 1.3.6.1.4.1.1332.1.1.5.3.113.1 | ||||||||||||||||||||
| SmsanTacacsServerTimeout | 1.3.6.1.4.1.1332.1.1.5.3.113.1.1 | Integer32 (1..30) | RW | 10 | |||||||||||||||||
scalar · Integer32 (1..30) · read-write · current TACACS server response timeout value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmsanTacacsServerTable | 1.3.6.1.4.1.1332.1.1.5.3.113.2 | NA | |||||||||||||||||||
table · not-accessible · current Table with information about Radius Authentication Server IP Addresses, port numbers and shared secret | |||||||||||||||||||||
| RmsanTacacsServerEntry | 1.3.6.1.4.1.1332.1.1.5.3.113.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry consisting of configuration data for a Radius Authentication Server. | |||||||||||||||||||||
| CmsanTacacsServerIpAddress | 1.3.6.1.4.1.1332.1.1.5.3.113.2.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current IP Address of the configured TACACS server. This object cannot be changed after creation. | |||||||||||||||||||||
| CmsanTacacsServerPort | 1.3.6.1.4.1.1332.1.1.5.3.113.2.1.2 | Unsigned32 (0..65535) | RW | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-write · current TCP/UDP port number of the TACACS server. | |||||||||||||||||||||
| CmsanTacacsServerSecret | 1.3.6.1.4.1.1332.1.1.5.3.113.2.1.3 | DisplayString (SIZE (0..48)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..48)) · read-write · current Configured shared secret for the TACACS server. | |||||||||||||||||||||
| CmsanTacacsServerPrimaryMode | 1.3.6.1.4.1.1332.1.1.5.3.113.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure the TACACS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set Primary.
| |||||||||||||||||||||
| CmsanTacacsServerCurrentMode | 1.3.6.1.4.1.1332.1.1.5.3.113.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates if the TACACS server is the current server in user for authentication.
| |||||||||||||||||||||
| CmsanTacacsServerStatus | 1.3.6.1.4.1.1332.1.1.5.3.113.2.1.6 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Creates or destroys a TACACS server entry. active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry. | |||||||||||||||||||||
Textual conventions
PercentByFivesUnsigned32 (0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100)An unsigned integer representing a value expressed as a percentage with five percent increments.
PortMaskOCTET STRINGEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0' When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports.
VlanListOCTET STRINGEach octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan supported is represented by a single bit within the value of this object. If that bit has a value of '1' then the associated port is in that vlan; the port is not included if the vlans bit has a value of '0'.
Xdsl2PsdMaskDsOCTET STRING (SIZE (0..96))This is a structure that represents up to 32 PSD mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the subcarrier associated with the breakpoint. The third octet holds the PSD reduction at the breakpoint from 0 (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of 0.5 dBm/Hz. The subcarrier index is an unsigned number in the range 0 to NSCds-1.
Xdsl2PsdMaskUsOCTET STRING (SIZE (0..48))This is a structure that represents up to 16 PSD mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the subcarrier associated with the breakpoint. The third octet holds the PSD reduction at the breakpoint from 0(0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of 0.5 dBm/Hz. The subcarrier index is an unsigned number in the range 0 to NSCus-1.
Traps / Notifications
- msanSnmpIfStatusChanged
1.3.6.1.4.1.1332.1.1.5.3.7.2.4 - msanSnmpOnuBlackListAdded
1.3.6.1.4.1.1332.1.1.5.3.7.2.2 - msanSnmpOnuBlackListRemoved
1.3.6.1.4.1.1332.1.1.5.3.7.2.3 - msanSnmpOnuIfStatusChanged
1.3.6.1.4.1.1332.1.1.5.3.7.2.1