Juniper-UNI-ATM-MIB
Juniper Networks/UnisphereThe ATM MIB for the Juniper enterprise.
snmptranslate -m Juniper-UNI-ATM-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-UNI-ATM-MIB <host> 1.3.6.1.4.1.4874.2.2.8Imports
| ATM-FORUM-SNMP-M4-MIB | atmfM4VcTestCode, atmfM4VcTestId, atmfM4VcTestObject, atmfM4VcTestResult, atmfM4VcTestType, atmfM4VpTestCode, atmfM4VpTestId, atmfM4VpTestObject, atmfM4VpTestResult, atmfM4VpTestType |
|---|---|
| ATM-MIB | atmVclVci, atmVclVpi, atmVplVpi |
| ATM-TC-MIB | AtmAddr, AtmVcIdentifier, AtmVorXAdminStatus, AtmVpIdentifier |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable, JuniInterfaceLocationType, JuniInterfaceLocationValue, JuniNextIfIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniAtmMIB | 1.3.6.1.4.1.4874.2.2.8 | |||
identity The ATM MIB for the Juniper enterprise. | ||||
| NjuniAtmObjects | 1.3.6.1.4.1.4874.2.2.8.1 | |||
| NjuniAtmIfLayer | 1.3.6.1.4.1.4874.2.2.8.1.1 | |||
| SjuniAtmNextIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.1 | JuniNextIfIndex | RO | |
scalar · JuniNextIfIndex · read-only · current Coordinate ifIndex value allocation for entries in juniAtmIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | ||||
| TjuniAtmIfTable | 1.3.6.1.4.1.4874.2.2.8.1.1.2 | NA | ||
table · not-accessible · current This table contains entries for ATM interfaces present in the system. | ||||
| RjuniAtmIfEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an ATM interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
| ||||
| CjuniAtmIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM interface. When creating entries in this table, suitable values for this object are determined by reading juniAtmNextIfIndex. | ||||
| CjuniAtmIfRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmIfRowStatus
juniAtmIfLowerIfIndex
In addition, when creating an entry the following condition must hold:
A value for juniAtmIfIndex must have been determined previously, by
reading juniAtmNextIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating/destroying an entry in this table. | ||||
| CjuniAtmIfLowerIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.3 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of an interface over which this ATM interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation. | ||||
| CjuniAtmIfIlmiVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.4 | AtmVpIdentifier | RC | |
column · AtmVpIdentifier · read-create · current The VPI of the ILMI of a major ATM interface. | ||||
| CjuniAtmIfIlmiVci | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.5 | AtmVcIdentifier | RC | |
column · AtmVcIdentifier · read-create · current The VCI of the ILMI of a major ATM interface. | ||||
| CjuniAtmIfIlmiVcd | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.6 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current An integer identifier for the ILMI, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM interface. | ||||
| CjuniAtmIfIlmiPollFrequency | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The amount of time in seconds between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface.
| ||||
| CjuniAtmIfIlmiAdminState | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The administrative status of ILMI in the ATM interface.
| ||||
| CjuniAtmIfUniVersion | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Use to specify the User Network Interface (UNI) the router should use when ILMI link auto determination is unsuccesful or ILMI is disabled.
| ||||
| CjuniAtmIfOamCellRxAdminState | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Use to specify the OAM Cell Receive Administrative state on this interface.
| ||||
| CjuniAtmIfInCells | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of cells received on this major interface. | ||||
| CjuniAtmIfOutCells | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of cells transmitted on this major interface. | ||||
| CjuniAtmIfVcCount | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.13 | Integer32 (0..268431360) | RO | |
column · Integer32 (0..268431360) · read-only · current The total number of circuits configured on this interface. | ||||
| CjuniAtmIfMapGroup | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.14 | JuniAtmNbmaMapNameOrNull | RC | |
column · JuniAtmNbmaMapNameOrNull · read-create · current The NBMA map group this interface is associated with. | ||||
| CjuniAtmIfCacAdminState | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.15 | JuniEnable | RC | |
column · JuniEnable · read-create · current The administrative staus of CAC on this ATM major interface. | ||||
| CjuniAtmIfCacUbrWeight | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.16 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current The bandwidth associated with every UBR and UBR with PCR connection configured on the ATM major interface. This value is used for CAC computation. The units are kilo-bits per second (kbps).
| ||||
| CjuniAtmIfCacSubscriptionBandwidth | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.17 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current The subscribed bandwidth of the ATM major interface. If this value is not specified or set to 0, the effective port bandwidth is used. When a Get operation is performed the current effective bandwidth is returned. The units are kilo-bits per second (kbps).
| ||||
| CjuniAtmIfCacAvailableBandwidth | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.18 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The available bandwidth in Tx direction of the ATM major interface. As connections are added or deleted on the interface, this value is updated. The units are kilo-bits per second (kbps).
| ||||
| CjuniAtmIfCacAvailableBandwidthRx | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.19 | Integer32 (0..2147483647) | RO | deprecated |
column · Integer32 (0..2147483647) · read-only · deprecated The available bandwidth in Rx direction of the ATM major interface. As connections are added or deleted on the interface, this value is updated. The units are kilo-bits per second (kbps).
| ||||
| CjuniAtmIfE164Autoconversion | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.20 | INTEGER | RC | obsolete |
column · INTEGER · read-create · obsolete The status of E164 autoconversion feature in the ATM interface.
| ||||
| CjuniAtmIfE164Gateway | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.21 | INTEGER | RC | obsolete |
column · INTEGER · read-create · obsolete The status of E164 gateway feature in the ATM interface.
| ||||
| CjuniAtmIfE164OneToOneAddrTrans | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.22 | INTEGER | RC | obsolete |
column · INTEGER · read-create · obsolete The status of E164 one-to-one address translation feature in the ATM interface.
| ||||
| CjuniAtmIfOamCellFilter | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current The type of OAM cells to discard when juniAtmIfOamCellRxAdminState is set to oamCellAdminStateDisabled. The value oamCellFilterAlarm discards received OAM AIS and RDI cells. The value oamCellFilterAll discards all received OAM cells. Note that when juniAtmIfOamCellRxAdminState is set to oamCellAdminStateEnabled, this object has no effect.
| ||||
| CjuniAtmIfCacUsedBandwidthUpper | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.24 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The most significant 32 bits of the CAC used bandwidth on the ATM major interface. The least significant 32 bits of the CAC used bandwidth are specified by juniAtmIfCacUsedBandwidthLower. | ||||
| CjuniAtmIfCacUsedBandwidthLower | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.25 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The least significant 32 bits of the CAC used bandwidth on the ATM major interface. The most significant 32 bits of the CAC used bandwidth are specified by juniAtmIfCacUsedBandwidthUpper. | ||||
| CjuniAtmIfAssociatedVcClassId | 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.26 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The integer identifier of the ATM VC class associated with this ATM interface. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAtmVcClassNameTable. A value of 0 means no VC class association exists for this interface. | ||||
| TjuniAtmPvcStatisticsTable | 1.3.6.1.4.1.4874.2.2.8.1.1.3 | NA | ||
table · not-accessible · current This table contains statistics for PVC entries. | ||||
| RjuniAtmPvcStatisticsEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1 | NA | ||
row · not-accessible · current Each entry provides statistics on an ATM PVC. | ||||
| CjuniAtmPvcStatsIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM interface. | ||||
| CjuniAtmPvcStatsVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current The VPI of the ATM VCC used by this ATM interface and PVC. | ||||
| CjuniAtmPvcStatsVci | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.3 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current The VCI of the ATM VCC used by this ATM interface and PVC. | ||||
| CjuniAtmPvcStatsInCells | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Received cells. | ||||
| CjuniAtmPvcStatsInCellOctets | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Received cells octets. | ||||
| CjuniAtmPvcStatsInPackets | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Received AAL PDUs. | ||||
| CjuniAtmPvcStatsInPacketOctets | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Received AAL PDU octets. | ||||
| CjuniAtmPvcStatsOutCells | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Transmitted cells. | ||||
| CjuniAtmPvcStatsOutCellOctets | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Transmitted cell octets. | ||||
| CjuniAtmPvcStatsOutPackets | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Transmitted AAL PDUs. | ||||
| CjuniAtmPvcStatsOutPacketOctets | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Transmitted AAL PDU octets. | ||||
| CjuniAtmPvcStatsInCellErrors | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current Received cells dropped due to errors. | ||||
| CjuniAtmPvcStatsinPacketErrors | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Received packets dropped due to errors. | ||||
| CjuniAtmPvcStatsOutCellErrors | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Cells not transmitted due to errors. | ||||
| CjuniAtmPvcStatsOutPacketErrors | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current Packets not transmitted due to errors. | ||||
| CjuniAtmPvcStatsInPacketDiscards | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Received packets w/o errors discarded. | ||||
| CjuniAtmPvcStatsInPacketOctetDiscards | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current Received bytes w/o errors discarded. | ||||
| CjuniAtmPvcStatsInPacketUnknownProtocol | 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current Received packets that are discarded because the interface can not discern or is not configured to support this protocol. | ||||
| TjuniAtmVpTunnelTable | 1.3.6.1.4.1.4874.2.2.8.1.1.4 | NA | ||
table · not-accessible · current This table contains entries for ATM VP Tunnels present in the system. | ||||
| RjuniAtmVpTunnelEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.4.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an ATM VP Tunnel. | ||||
| CjuniAtmVpTunnelIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM interface. The value of this object is the same as the juniAtmIfIndex object in the juniAtmIfTable. Entries in this table cannot be created unless the underlying ATM interface entry is created first in the juniAtmIfTable. | ||||
| CjuniAtmVpTunnelVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current The VPI value for this VP tunnel entry. | ||||
| CjuniAtmVpTunnelKbps | 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.3 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current The tunnel rate in kilobits per second (kbps) for this entry.
| ||||
| CjuniAtmVpTunnelRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmVpTunnelRowStatus
juniAtmVpTunnelKbps
In addition, when creating an entry the following condition must hold:
A correponding juniAtmVpTunnelIfIndex value must have been created
in the juniAtmIfTable previously. | ||||
| CjuniAtmVpTunnelServiceCategory | 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The ATM service category for the tunnel.
| ||||
| TjuniAtmIfCapabilityTable | 1.3.6.1.4.1.4874.2.2.8.1.1.5 | NA | ||
table · not-accessible · current This table contains entries for ATM interfaces present in the system. | ||||
| RjuniAtmIfCapabilityEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1 | NA | ||
row · not-accessible · current Each entry describes the capabilities of an ATM interface. A management client can use this table to determine differences in the configurable level of support across entries in this table. | ||||
| CjuniAtmIfCapabilityIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM interface. The value of this object is the same as juniAtmIfIndex in the juniAtmIfTable. | ||||
| CjuniAtmIfCapabilityTrafficShaping | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether traffic shaping is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. | ||||
| CjuniAtmIfCapabilityOam | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether OAM is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. | ||||
| CjuniAtmIfCapabilityDefaultVcPerVp | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.4 | Integer32 (0..65536) | RO | |
column · Integer32 (0..65536) · read-only · current The default number of VCs per VP for this interface. | ||||
| CjuniAtmIfCapabilityNumVpiVciBits | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.5 | Integer32 (8..28) | RO | |
column · Integer32 (8..28) · read-only · current The total range of bits used for constructing VPI/VCI identifiers for this interface. | ||||
| CjuniAtmIfCapabilityMaxVcd | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.6 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The maximum configurable value for a VCD on this interface. | ||||
| CjuniAtmIfCapabilityMaxVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.7 | AtmVpIdentifier | RO | |
column · AtmVpIdentifier · read-only · current The maximum configurable value for a VPI on this interface. | ||||
| CjuniAtmIfCapabilityMaxVci | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.8 | AtmVcIdentifier | RO | |
column · AtmVcIdentifier · read-only · current The maximum configurable value for a VCI on this interface. | ||||
| CjuniAtmIfCapabilityOamCellFilter | 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether OAM cell filter is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. | ||||
| TjuniAtmIfSvcSignallingTable | 1.3.6.1.4.1.4874.2.2.8.1.1.6 | NA | deprecated | |
table · not-accessible · deprecated This table contains entries for extending the juniAtmIfTable for configuring signalling information for switched virtual connection (SVC). | ||||
| RjuniAtmIfSvcSignallingEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.6.1 | NA | deprecated | |
row · not-accessible · deprecated Each entry provides configuration parameters for ATM signalling on the interface.
| ||||
| CjuniAtmIfSvcSignallingVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.1 | AtmVpIdentifier | RW | deprecated |
column · AtmVpIdentifier · read-write · deprecated The VPI identifier of the ATM circuit used for signalling for this interface. | ||||
| CjuniAtmIfSvcSignallingVci | 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.2 | AtmVcIdentifier | RW | deprecated |
column · AtmVcIdentifier · read-write · deprecated The VCI identifier of the ATM circuit used for signalling for this interface. | ||||
| CjuniAtmIfSvcSignallingVcd | 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.3 | Integer32 (0..2147483647) | RW | deprecated |
column · Integer32 (0..2147483647) · read-write · deprecated An integer identifier for the ATM circuit used for signalling on this interface. | ||||
| CjuniAtmIfSvcSignallingAdminStatus | 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.4 | AtmVorXAdminStatus | RW | deprecated |
column · AtmVorXAdminStatus · read-write · deprecated The administrative status of signalling on the ATM interface. | ||||
| TjuniAtmIfPnniRccTable | 1.3.6.1.4.1.4874.2.2.8.1.1.7 | NA | obsolete | |
table · not-accessible · obsolete This table contains entries for extending the juniAtmIfTable for configuring PNNI RCC information. | ||||
| RjuniAtmIfPnniRccEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.7.1 | NA | obsolete | |
row · not-accessible · obsolete Each entry provides configuration parameters for PNNI RCC on the interface.
| ||||
| CjuniAtmIfPnniRccVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.7.1.1 | AtmVpIdentifier | RW | obsolete |
column · AtmVpIdentifier · read-write · obsolete The VPI identifier of the ATM circuit used for PNNI RCC on this interface. | ||||
| CjuniAtmIfPnniRccVci | 1.3.6.1.4.1.4874.2.2.8.1.1.7.1.2 | AtmVcIdentifier | RW | obsolete |
column · AtmVcIdentifier · read-write · obsolete The VCI identifier of the ATM circuit used for PNNI RCC on this interface. | ||||
| CjuniAtmIfPnniRccVcd | 1.3.6.1.4.1.4874.2.2.8.1.1.7.1.3 | Integer32 (0..2147483647) | RW | obsolete |
column · Integer32 (0..2147483647) · read-write · obsolete An integer identifier for the ATM circuit used for PNNI RCC on this interface. | ||||
| CjuniAtmIfPnniRccAdminStatus | 1.3.6.1.4.1.4874.2.2.8.1.1.7.1.4 | AtmVorXAdminStatus | RW | obsolete |
column · AtmVorXAdminStatus · read-write · obsolete The administrative status of PNNI on the ATM interface. | ||||
| TjuniAtmOamF4FlowEndToEndCfgTable | 1.3.6.1.4.1.4874.2.2.8.1.1.8 | NA | ||
table · not-accessible · current This table contains entries for F4 OAM end-to-end flows configured. | ||||
| RjuniAtmOamF4FlowEndToEndCfgEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.8.1 | NA | ||
row · not-accessible · current Each entry provides configuration parameters for one F4 OAM end-to-end flow configured for each VPI. | ||||
| CjuniAtmOamF4FlowEndToEndIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM interface to configure the F4 OAM end-to-end flow. | ||||
| CjuniAtmOamF4FlowEndToEndVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.2 | Integer32 (0..255) | NA | |
column · Integer32 (0..255) · not-accessible · current Select the VPI for F4 OAM end-to-end flow configuration. | ||||
| CjuniAtmOamF4FlowEndToEndLoopbackTimer | 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.3 | Integer32 (-1..600) | RC | |
column · Integer32 (-1..600) · read-create · current Configure the timer for sending the F4 flow end-to-end loopback OAM cells. Setting this value will enable sending the F4 end cells on the circuit. It is not allowed to set the value to -1 and whenever it is read as -1 that means sending end loopback is not enabled. Setting the loopback timer, other than -1, will enable sending the end cells.
| ||||
| CjuniAtmOamF4FlowEndToEndCCSink | 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Enable/Disable F4 flow end-to-end continuity check sink end point for this VP. | ||||
| CjuniAtmOamF4FlowEndToEndCCSource | 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current Enable/Disable F4 flow end-to-end continuity check source end point for this VP. | ||||
| CjuniAtmOamF4FlowEndToEndRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniAtmOamF4FlowEndToEndRowStatus
F4 OAM end loopback and CC tests are mutually exclusive, enabling one
will disable the other automatically. So, it is not allowed either at
the circuit creation time or after the circuit creation to issue a
request to enable end-to-end loopback and CC tests simultaneouly.
Enabling/disabling CC sink and source is one time operation. To
re-enable either CC source and sink in way different to earlier, both
has to be disabled from the previous. | ||||
| TjuniAtmOamF4FlowSegmentCfgTable | 1.3.6.1.4.1.4874.2.2.8.1.1.9 | NA | ||
table · not-accessible · current This table contains entries for F4 OAM Segment flows configured. | ||||
| RjuniAtmOamF4FlowSegmentCfgEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.9.1 | NA | ||
row · not-accessible · current Each entry provides configuration parameters for one F4 OAM Segment flow configured for each VPI. | ||||
| CjuniAtmOamF4FlowSegmentIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM interface to configure the F4 OAM segment flow. | ||||
| CjuniAtmOamF4FlowSegmentVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.2 | Integer32 (0..255) | NA | |
column · Integer32 (0..255) · not-accessible · current Select the VPI for F4 OAM segment flow configuration. | ||||
| CjuniAtmOamF4FlowSegmentCCSink | 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current Enable/Disable F4 flow segment continuity check sink end point for this VP. | ||||
| CjuniAtmOamF4FlowSegmentCCSource | 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Enable/Disable F4 flow segment continuity check source end point for this VP. | ||||
| CjuniAtmOamF4FlowSegmentRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniAtmOamF4FlowSegmentRowStatus
Enabling/disabling CC sink and source is one time operation. To
re-enable either CC source and sink in way different to earlier, both
has to be disabled from the previous. F4 OAM segment loopback test is
not supported. | ||||
| TjuniAtmVpDescrTable | 1.3.6.1.4.1.4874.2.2.8.1.1.10 | NA | ||
table · not-accessible · current This table contains entries for ATM VP Description present in the system. The user can configure a description of up to 32 characters for every VP in the ATM interface. A row exists for every VP on the ATM interface. These rows get created as soon as the ATM major interface created. | ||||
| RjuniAtmVpDescrEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.10.1 | NA | ||
| CjuniAtmVpDescription | 1.3.6.1.4.1.4874.2.2.8.1.1.10.1.1 | SnmpAdminString (SIZE (0..32)) | RW | |
column · SnmpAdminString (SIZE (0..32)) · read-write · current The description for this VP. The default value of this object is null string. | ||||
| TjuniAtmF4FlowOamEndToEndStatsTable | 1.3.6.1.4.1.4874.2.2.8.1.1.11 | NA | ||
table · not-accessible · current This table contains entries for F4 flow EndToEnd OAM circuits stats. | ||||
| RjuniAtmF4FlowOamEndToEndStatsEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1 | NA | ||
row · not-accessible · current Each entry provides stats for one F4 OAM circuit for each VPI. | ||||
| CjuniAtmF4FlowInOamEndAisCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 AIS cells.
| ||||
| CjuniAtmF4FlowInOamEndRdiCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 RDI cells.
| ||||
| CjuniAtmF4FlowInOamEndCCCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 CC cells.
| ||||
| CjuniAtmF4FlowInOamEndCCActDeActCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 activation/de-activation cells.
| ||||
| CjuniAtmF4FlowInOamEndLoopbackCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Total received OAM F4 end-to-end loopback cells. Aggregate of juniAtmF4FlowEndToEndInLoopbackCmds and juniAtmF4FlowEndToEndInLoopbackRsps
| ||||
| CjuniAtmF4FlowOutEndRdiCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted end-to-end OAM F4 RDI cells.
| ||||
| CjuniAtmF4FlowOutEndCCCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted end-to-end OAM F4 CC cells.
| ||||
| CjuniAtmF4FlowOutEndCCActDeActCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted end-to-end OAM F4 activation/de-activation cells.
| ||||
| CjuniAtmF4FlowOutEndToEndLoopbackCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Total transmitted OAM F4 end-to-end loopback cells. Aggregate of juniAtmF4FlowEndToEndOutLoopbackCmds and juniAtmF4FlowEndToEndOutLoopbackRsps
| ||||
| CjuniAtmF4FlowEndActualLoopbackFreq | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.10 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Actual end-to-end loopback Frequecy calculated for OAM cells transmission.
| ||||
| CjuniAtmF4FlowEndLastTimeChanged | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.11 | TimeTicks | RO | |
column · TimeTicks · read-only · current Last time end-to-end F4 OAM flow got changed. | ||||
| CjuniAtmF4FlowOamEndVpOperationState | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Represents the F4 end-to-end OAM flow VP operation states. It can take
one of the following operational state values:
vcAisState - AIS cell received or underlying physical layer
reporting transmission path AIS.
vcRdiState - RDI cell received.
vcDownRetry - OAM loopback failed, using retry frequency to
verify that the VC is really down.
vcUpRetry - OAM loopback successful, using retry frequency
to verify that the VC is really up.
vcUp - OAM loopback successful after up retry
verification.
vcDown - OAM loopback failed after down retry
verification.
vcNotManaged - No verification via loopback cells being
performed.
vpAisState - State when F4 AIS cell is received.
vpRdiState - State when F4 RDI cell is received.
vcInVpRdiState - The data vc is down as a result of VP failure
thorugh F4 Rdi oam cell.
vcInVpAisState - The data vc is down as a result of VP failure
through F4 Ais oam cell.
vcSegmentAisState - Segment AIS cell received.
vcSegRdiState - Segment RDI cell received.
| ||||
| CjuniAtmF4FlowOamEndVpAdminState | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current End-to-end VP admin state.
| ||||
| CjuniAtmF4FlowEndInOamCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 loopback cells.
| ||||
| CjuniAtmF4FlowEndOutOamCells | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted end-to-end OAM F4 loopback cells.
| ||||
| CjuniAtmF4FlowEndInOamCellsDropped | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM cells that were dropped.
| ||||
| CjuniAtmF4FlowEndToEndInLoopbackCmds | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F4 end-to-end loopback commands.
| ||||
| CjuniAtmF4FlowEndToEndInLoopbackRsps | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F4 end-to-end loopback responses.
| ||||
| CjuniAtmF4FlowEndToEndOutLoopbackCmds | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F4 end-to-end loopback commands.
| ||||
| CjuniAtmF4FlowEndToEndOutLoopbackRsps | 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F4 end-to-end loopback responses.
| ||||
| TjuniAtmF4FlowOamSegmentStatsTable | 1.3.6.1.4.1.4874.2.2.8.1.1.12 | NA | ||
table · not-accessible · current This table contains entries for F4 flow Segment OAM circuits stats. | ||||
| RjuniAtmF4FlowOamSegmentStatsEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1 | NA | ||
row · not-accessible · current Each entry provides stats for one F4 OAM circuit for each VPI. | ||||
| CjuniAtmF4FlowInOamSegmentAisCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 AIS cells.
| ||||
| CjuniAtmF4FlowInOamSegmentRdiCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 RDI cells.
| ||||
| CjuniAtmF4FlowInOamSegmentCCCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 CC cells.
| ||||
| CjuniAtmF4FlowInOamSegmentCCActDeActCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 activation/de-activation cells.
| ||||
| CjuniAtmF4FlowInOamSegmentLoopbackCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Total received OAM F4 segment loopback cells. Aggregate of juniAtmF4FlowSegmentInLoopbackCmds and juniAtmF4FlowSegmentInLoopbackRsps
| ||||
| CjuniAtmF4FlowOutSegmentRdiCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted end-to-end OAM F4 RDI cells.
| ||||
| CjuniAtmF4FlowOutSegmentCCCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted end-to-end OAM F4 CC cells.
| ||||
| CjuniAtmF4FlowOutSegmentCCActDeActCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted end-to-end OAM F4 activation/de-activation cells.
| ||||
| CjuniAtmF4FlowOutSegmentLoopbackCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Total transmitted OAM F4 segment loopback cells. Aggregate of juniAtmF4FlowSegmentOutLoopbackCmds and juniAtmF4FlowSegmentOutLoopbackRsps
| ||||
| CjuniAtmF4FlowSegmentLastTimeChanged | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.10 | TimeTicks | RO | |
column · TimeTicks · read-only · current Last time end-to-end F4 OAM flow got changed. | ||||
| CjuniAtmF4FlowOamSegmentVpOperationState | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Represents the F4 end-to-end OAM flow VP operation states. It can take
one of the following operational state values:
vcAisState - AIS cell received or underlying physical layer
reporting transmission path AIS.
vcRdiState - RDI cell received.
vcDownRetry - OAM loopback failed, using retry frequency to
verify that the VC is really down.
vcUpRetry - OAM loopback successful, using retry frequency
to verify that the VC is really up.
vcUp - OAM loopback successful after up retry
verification.
vcDown - OAM loopback failed after down retry
verification.
vcNotManaged - No verification via loopback cells being
performed.
vpAisState - State when F4 AIS cell is received.
vpRdiState - State when F4 RDI cell is received.
vcInVpRdiState - The data vc is down as a result of VP failure
thorugh F4 Rdi oam cell.
vcInVpAisState - The data vc is down as a result of VP failure
through F4 Ais oam cell.
vcSegmentAisState - Segment AIS cell received.
vcSegRdiState - Segment RDI cell received.
| ||||
| CjuniAtmF4FlowOamSegmentVpAdminState | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Segment VP admin state.
| ||||
| CjuniAtmF4FlowSegmentInOamCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM F4 loopback cells.
| ||||
| CjuniAtmF4FlowSegmentOutOamCells | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted end-to-end OAM F4 loopback cells.
| ||||
| CjuniAtmF4FlowSegmentInOamCellsDropped | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current Received end-to-end OAM cells that were dropped.
| ||||
| CjuniAtmF4FlowSegmentInLoopbackCmds | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F4 segment loopback commands.
| ||||
| CjuniAtmF4FlowSegmentInLoopbackRsps | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F4 segment loopback responses.
| ||||
| CjuniAtmF4FlowSegmentOutLoopbackCmds | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F4 segment loopback commands.
| ||||
| CjuniAtmF4FlowSegmentOutLoopbackRsps | 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F4 segment loopback responses.
| ||||
| TjuniAtmMartiniTimeoutTimerTable | 1.3.6.1.4.1.4874.2.2.8.1.1.13 | NA | ||
table · not-accessible · current This table contains entries for ATM Martini cell aggregation timeout detection. The user can configure timeout values for three timers. A row exists for every separate timer supported. These rows get created as soon as the ERX system comes up. | ||||
| RjuniAtmMartiniTimeoutTimerEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.13.1 | NA | ||
row · not-accessible · current Each entry contains the timeout value of ATM Martini cell aggregation timer. | ||||
| CjuniAtmMartiniTimeoutTimerIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.13.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The ATM Martini cell aggregation timeout timer identifier.
| ||||
| CjuniAtmMartiniTimeoutTimerValue | 1.3.6.1.4.1.4874.2.2.8.1.1.13.1.2 | Integer32 (100..4095) | RW | |
column · Integer32 (100..4095) · read-write · current The ATM Martini cell aggregation timeout timer value in microseconds. | ||||
| TjuniAtmVpStatsTable | 1.3.6.1.4.1.4874.2.2.8.1.1.14 | NA | ||
table · not-accessible · current This table contains entries for ATM VP statistics present in the system. A row exists for every VP on the ATM interface. These rows get created as soon as the ATM major interface created. | ||||
| RjuniAtmVpStatsEntry | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1 | NA | ||
| CjuniAtmVpStatsIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM interface. | ||||
| CjuniAtmVpStatsVpi | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current The VPI value of the virtual path for which statistics are retrieved. | ||||
| CjuniAtmVpStatsInCells | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current Received cells. | ||||
| CjuniAtmVpStatsInPackets | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Received AAL5 PDUs. | ||||
| CjuniAtmVpStatsInPacketOctets | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Received AAL5 PDU octets. | ||||
| CjuniAtmVpStatsOutCells | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Transmitted cells. | ||||
| CjuniAtmVpStatsOutPackets | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Transmitted AAL5 PDUs | ||||
| CjuniAtmVpStatsOutPacketOctets | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Transmitted AAL5 PDU octets. | ||||
| CjuniAtmVpStatsInPacketErrors | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Received packets dropped due to errors. | ||||
| CjuniAtmVpStatsOutPacketErrors | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Packets not transmitted due to errors. | ||||
| CjuniAtmVpStatsInPacketDiscards | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current Received packets without errors discarded. | ||||
| CjuniAtmVpStatsInPacketOctetDiscards | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current Received bytes without errors discarded. | ||||
| CjuniAtmVpStatsInPacketUnknownProtocol | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Received packets that are discarded because the interface can not discern or is not configured to support this protocol. | ||||
| CjuniAtmVpStatsCrcErrors | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Received packets that are discarded because of check sum erros | ||||
| CjuniAtmVpStatsSarTimeouts | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current Received packets that are discarded because of SAR timeout | ||||
| CjuniAtmVpStatsOverSizedPackets | 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Over sized packets that are received on this VP. | ||||
| NjuniAtmAal5IfLayer | 1.3.6.1.4.1.4874.2.2.8.1.2 | |||
| SjuniAtmAal5NextIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.2.1 | JuniNextIfIndex | RO | |
scalar · JuniNextIfIndex · read-only · current Coordinate ifIndex value allocation for entries in juniAtmAal5IfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | ||||
| TjuniAtmAal5IfTable | 1.3.6.1.4.1.4874.2.2.8.1.2.2 | NA | ||
table · not-accessible · current This table contains entries for ATM AAL5 interfaces present in the system. | ||||
| RjuniAtmAal5IfEntry | 1.3.6.1.4.1.4874.2.2.8.1.2.2.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an ATM AAL5 interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
| ||||
| CjuniAtmAal5IfIndex | 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM AAL5 interface. When creating entries in this table, suitable values for this object are determined by reading juniAtmAal5NextIfIndex. | ||||
| CjuniAtmAal5IfRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmAal5IfRowStatus
juniAtmAal5IfLowerIfIndex
In addition, when creating an entry the following condition must hold:
A value for juniAtmAal5IfIndex must have been determined previously,
by reading juniAtmAal5NextIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating/destroying an entry in this table. | ||||
| CjuniAtmAal5IfLowerIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.3 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of an ATM interface over which this ATM AAL5 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation. | ||||
| TjuniAtmBulkCircuitsNameTable | 1.3.6.1.4.1.4874.2.2.8.1.2.3 | NA | ||
table · not-accessible · current The entries in this table provide mappings of ATM bulk virtual circuit range names to local integer identifiers for those profiles. These integers are used as indexes into other MIB tables containing profile configuration parameters associated with the same profile name. | ||||
| RjuniAtmBulkCircuitsNameEntry | 1.3.6.1.4.1.4874.2.2.8.1.2.3.1 | NA | ||
row · not-accessible · current A mapping of a ATM bulk virtual circuit range name to an integer identifier for that name. | ||||
| CjuniAtmBulkCircuitsNameAal5IfIndex | 1.3.6.1.4.1.4874.2.2.8.1.2.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM AAL5 interface. | ||||
| CjuniAtmBulkCircuitsNameName | 1.3.6.1.4.1.4874.2.2.8.1.2.3.1.2 | DisplayString (SIZE (1..80)) | NA | |
column · DisplayString (SIZE (1..80)) · not-accessible · current The ATM bulk virtual circuit range name uniquely identifying this entry. | ||||
| CjuniAtmBulkCircuitsNameRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.2.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. Creating an entry in this table creates corresponding entry in juniAtmBulkCircuitsIdTable. Deleting an entry in this table deletes corresponding entries in juniAtmBulkCircuitsIdTable, juniAtmBulkCircuitsTable and juniAtmProfileOverrideAssignIfCircuitTable. | ||||
| CjuniAtmBulkCircuitsNameId | 1.3.6.1.4.1.4874.2.2.8.1.2.3.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The integer identifier associated with this ATM bulk virtual circuit range name. This value of this identifier is assigned by the device when an entry in this table is created. | ||||
| TjuniAtmBulkCircuitsIdTable | 1.3.6.1.4.1.4874.2.2.8.1.2.4 | NA | ||
table · not-accessible · current Provides inverse mapping of ATM bulk virtual circuit IDs to ATM bulk virtual circuit names. | ||||
| RjuniAtmBulkCircuitsIdEntry | 1.3.6.1.4.1.4874.2.2.8.1.2.4.1 | NA | ||
row · not-accessible · current A mapping of an integer identifier to a ATM bulk virtual circuit name. | ||||
| CjuniAtmBulkCircuitsIdAal5IfIndex | 1.3.6.1.4.1.4874.2.2.8.1.2.4.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM AAL5 interface. | ||||
| CjuniAtmBulkCircuitsIdId | 1.3.6.1.4.1.4874.2.2.8.1.2.4.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The integer identifier associated with this ATM bulk virtual circuit name. | ||||
| CjuniAtmBulkCircuitsIdName | 1.3.6.1.4.1.4874.2.2.8.1.2.4.1.3 | DisplayString (SIZE (1..80)) | RO | |
column · DisplayString (SIZE (1..80)) · read-only · current The ATM bulk virtual circuit name having the associated identifier. | ||||
| CjuniAtmBulkCircuitsIdNextInstance | 1.3.6.1.4.1.4874.2.2.8.1.2.4.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The next available instance value for juniAtmBulkCircuitsEntry. | ||||
| TjuniAtmBulkCircuitsTable | 1.3.6.1.4.1.4874.2.2.8.1.2.5 | NA | ||
table · not-accessible · current This table contains bulk virtual circuit range parameters. | ||||
| RjuniAtmBulkCircuitsEntry | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of VC range. | ||||
| CjuniAtmBulkCircuitsAal5IfIndex | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM AAL5 interface on which this bulk virtual circuit sub-range is created. | ||||
| CjuniAtmBulkCircuitsId | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The integer identifier associated with this ATM bulk virtual circuit name. | ||||
| CjuniAtmBulkCircuitsInstance | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.3 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The unique identifier of the ATM bulk virtual circuit sub-range. | ||||
| CjuniAtmBulkCircuitsRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. Since none of the VPI/VCI minimum and maximum values have default values, all these values must be specified before setting RowStatus to 'createAndGo'. The VPI/VCI minimum and maximum values can only be configured upon creation. Deleting an entry in this table deletes corresponding entries in juniAtmProfileOverrideAssignIfCircuitTable. | ||||
| CjuniAtmBulkCircuitsMinVpi | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.5 | AtmVpIdentifier | RC | |
column · AtmVpIdentifier · read-create · current The minimum value of VPI for this circuit sub-range. This value must be less than or equal to the value of juniAtmBulkCircuitsMaxVpi. | ||||
| CjuniAtmBulkCircuitsMaxVpi | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.6 | AtmVpIdentifier | RC | |
column · AtmVpIdentifier · read-create · current The maximum value of VPI for this cicuit sub-range. This value must be equal to or greater than the value of juniAtmBulkCircuitsMinVpi. | ||||
| CjuniAtmBulkCircuitsMinVci | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.7 | AtmVcIdentifier | RC | |
column · AtmVcIdentifier · read-create · current The minimum value of VCI for this circuit sub-range. This value must be less than or equal to the value of juniAtmBulkCircuitsMaxVci. | ||||
| CjuniAtmBulkCircuitsMaxVci | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.8 | AtmVcIdentifier | RC | |
column · AtmVcIdentifier · read-create · current The maximum value of VCI for this circuit sub-range. This value must be equal to or greater than the value of juniAtmBulkCircuitsMinVci. | ||||
| CjuniAtmBulkCircuitsAdminState | 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.9 | JuniEnable | RC | |
column · JuniEnable · read-create · current The administrative status of this circuit sub-range. | ||||
| TjuniAtmProfileOverrideAssignIfCircuitTable | 1.3.6.1.4.1.4874.2.2.8.1.2.6 | NA | ||
table · not-accessible · current Table providing overriding profile assignment to a circuit configured
as part of bulk-configuration. Circuit is identified by interface index
and vpi, vci.
The entries in this table specify which profile to use when creating and
configuring a dynamic interface above a circuit specified by vpi and
vci.
This entry is effective when the circuit specified by
juniAtmProfileOverrideAssignIfCircuitAal5Index,
juniAtmProfileOverrideAssignIfCircuitRangeId,
juniAtmProfileOverrideAssignIfCircuitVpi,
juniAtmProfileOverrideAssignIfCircuitVci
is part of bulk-configuration. | ||||
| RjuniAtmProfileOverrideAssignIfCircuitEntry | 1.3.6.1.4.1.4874.2.2.8.1.2.6.1 | NA | ||
row · not-accessible · current An assignment of a profile to a circuit configured as part of bulk-configuration on an AAL5 interface. | ||||
| CjuniAtmProfileOverrideAssignIfCircuitAal5Index | 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the AAL5 interface to which the profile is assigned. | ||||
| CjuniAtmProfileOverrideAssignIfCircuitRangeId | 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The integer identifier associated with the ATM bulk circuit configuration. | ||||
| CjuniAtmProfileOverrideAssignIfCircuitVpi | 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.3 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current The VPI value of the circuit to which the profile is assigned. | ||||
| CjuniAtmProfileOverrideAssignIfCircuitVci | 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.4 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current The VCI value of the circuit to which the profile is assigned. | ||||
| CjuniAtmProfileOverrideAssignIfCircuitRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. Since the VPI, VCI and profileId values do not have any default values, all these values must be specified before setting RowStatus to 'createAndGo'. The VPI, VCI and profileId values can only be configured upon creation. None of these values can be modified except by deleting the entry. | ||||
| CjuniAtmProfileOverrideAssignIfCircuitProfileId | 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.6 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The ID of the profile assigned to the circuit configured as part of bulk-configuration. Circuit is identified by interface index and vpi, vci. | ||||
| CjuniAtmProfileOverrideAssignIfCircuitOperStatus | 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The operational status of the profile override assignment identified by this entry. It returns inactive(0), if a static ATM circuit with identical VPI/VCI values is present on the same ATM interface. In this case, this profile override will not be used to configure upper dynamic interfaces. It returns active(1), if no static ATM circuit with identical VPI/VCI values is present on the same ATM interface. In this case, this profile override will be used to configure upper dynamic interfaces.
| ||||
| NjuniAtmSubIfLayer | 1.3.6.1.4.1.4874.2.2.8.1.3 | |||
| SjuniAtmSubIfNextIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.3.1 | JuniNextIfIndex | RO | |
scalar · JuniNextIfIndex · read-only · current Coordinate ifIndex value allocation for entries in juniAtmSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | ||||
| TjuniAtmSubIfTable | 1.3.6.1.4.1.4874.2.2.8.1.3.2 | NA | ||
table · not-accessible · current This table contains entries for ATM Subinterfaces present in the system. | ||||
| RjuniAtmSubIfEntry | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an ATM Subinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
| ||||
| CjuniAtmSubIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniAtmSubNextIfIndex. | ||||
| CjuniAtmSubIfRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmSubIfRowStatus
juniAtmSubIfLowerIndex
In addition, when creating an entry the following condition must hold:
A value for juniAtmSubIfIndex must have been determined previously,
by reading juniAtmSubIfNextIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating/destroying an entry in this table. | ||||
| CjuniAtmSubIfDistinguisher | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.3 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current An integer identifier for the subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces configured on the same underlying ATM adaptation layer. The upper bound for the value is further constrained to be identical with the maximum number of subinterfaces supported by the lower interface. If this object is not configured, a value will be allocated internally and can be queried after table entry creation has succeeded. | ||||
| CjuniAtmSubIfLowerIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.4 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of an ATM AAL5 interface over which this ATM subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation. | ||||
| CjuniAtmSubIfNbma | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current The NBMA administrative setting. Setting this value of this object to true(1) will enable multipoint access on this interface. Setting the value to false(2), will enable point to point access on this interface. | ||||
| CjuniAtmSubIfAddress | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.6 | AtmAddr (SIZE (0 | 7 | 20)) | RC | deprecated |
column · AtmAddr (SIZE (0 | 7 | 20)) · read-create · deprecated Specifies the local ATM NSAP address of the circuit. A GET operation returns a full 20-octet NSAP. A SET operation only requires 7 octets, since the prefix can be implied. | ||||
| CjuniAtmSubIfMtu | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.7 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current The size of the largest packet which can be sent/received on the interface, specified in octets. | ||||
| CjuniAtmSubIfAdvisoryRxSpeed | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.8 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current Advisory receive speed, in kilobits per second (kbps), of this subinterface. This object has no impact on forwarding performance but may be used as a hint for underlying circuit receive speed. | ||||
| CjuniAtmSubIfMartiniMaxCellsPerPacket | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.9 | Integer32 (1..190) | RC | |
column · Integer32 (1..190) · read-create · current The number of cells that can be aggregated in a single ATM Martini packet in cell-relay mode. | ||||
| CjuniAtmSubIfMartiniTimeoutTimerId | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.10 | Integer32 (1..3) | RC | |
column · Integer32 (1..3) · read-create · current The timer identifier used to abandon cell aggregation when no cells are supplied for transmission in ATM Martini cell-relay mode. | ||||
| CjuniAtmSubIfAssociatedVcClassId | 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.11 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The integer identifier of the ATM VC class associated with this ATM sub interface. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAtmVcClassNameTable. A value of 0 means no VC class association exists for this interface. | ||||
| TjuniAtmSubIfVccTable | 1.3.6.1.4.1.4874.2.2.8.1.3.3 | NA | ||
table · not-accessible · current This table contains entries for ATM VCCs configured on ATM subinterfaces present in the system. An implementation may constrain the number of VCCs permitted to be configured per ATM Subinterface; in particular, an implementation may restrict each ATM Subinterface to have a single VCC. Attributes in this entry can only be configured at entry creation, and remain fixed for the lifetime of the entry. | ||||
| RjuniAtmSubIfVccEntry | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an ATM subinterface VCC. | ||||
| CjuniAtmSubIfVccVpi | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.1 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current The VPI of the ATM VCC used by this subinterface. | ||||
| CjuniAtmSubIfVccVci | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.2 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current The VCI of the ATM VCC used by this subinterface. | ||||
| CjuniAtmSubIfVccRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmSubIfVccRowStatus
In addition, when creating an entry the following conditions must hold:
The ATM Subinterface identified by juniAtmSubIfIndex must exist.
A positive value configured for juniAtmSubIfVccVcd must not already
be assigned to an existing VCC.
For each value of juniAtmSubIfVccServiceCategory, additional
dependent objects in the entry require configuration as identified
here:
juniAtmSubIfVccServiceCategory Requires configuration of:
------------------------------------------------------------
ubr <none>
ubrPcr juniAtmSubIfVccPcr
nrtVbr juniAtmSubIfVccPcr
juniAtmSubIfVccScr
juniAtmSubIfVccMbs
cbr juniAtmSubIfVccPcr
rtVbr juniAtmSubIfVccPcr
juniAtmSubIfVccScr
juniAtmSubIfVccMbs
------------------------------------------------------------
Attributes in this entry can only be configured at entry creation,
and remain fixed for the lifetime of the entry. | ||||
| CjuniAtmSubIfVccVcd | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current An integer identifier for the circuit, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among VCCs configured on the same underlying ATM interface. If this object is not configured, or is configured with a value of zero, a value will be allocated internally and can be queried after table entry creation has succeeded. | ||||
| CjuniAtmSubIfVccType | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. The 'autoconfig' value will recognize both VcMux and LLC formats. The 'aal5' and 'aal0' values are used for encapsulation methods for transport of ATM frames and cells over IP and MPLS networks when no encapsulation method is specified.
| ||||
| CjuniAtmSubIfVccServiceCategory | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable Bit Rate. cbr Constant Bit Rate. rtVbr Realtime Variable Bit Rate.
| ||||
| CjuniAtmSubIfVccPcr | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.7 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current Peak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have one of the following values:
ubrPcr
nrtVbr
cbr
rtVbr
| ||||
| CjuniAtmSubIfVccScr | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.8 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current Sustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have the following value:
nrtVbr
rtVbr
| ||||
| CjuniAtmSubIfVccMbs | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.9 | Integer32 (0..16777215) | RC | |
column · Integer32 (0..16777215) · read-create · current Maximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have the following value:
nrtVbr
rtVbr
| ||||
| CjuniAtmSubIfInverseArp | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.10 | TruthValue | RC | |
column · TruthValue · read-create · current Enables the inverse ARP protocol on this VCC; true(1) enables the protocol, false(2) disables it. | ||||
| CjuniAtmSubIfInverseArpRefresh | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.11 | Integer32 (0..60) | RC | |
column · Integer32 (0..60) · read-create · current The refresh rate in minutes between inverse ARP protocol messages.
| ||||
| CjuniAtmSubIfVccAssociatedVcClassId | 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.12 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The integer identifier of the ATM VC class associated with this ATM sub interface. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAtmVcClassNameTable. A value of 0 means no VC class association exists for this VC. | ||||
| TjuniAtmCircuitOamTable | 1.3.6.1.4.1.4874.2.2.8.1.3.4 | NA | ||
table · not-accessible · current This table contains circuit OAM data for a PVC. | ||||
| RjuniAtmCircuitOamEntry | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1 | NA | ||
row · not-accessible · current Each entry provides OAM data on an ATM PVC. | ||||
| CjuniAtmCircuitOamIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the ATM subinterface. | ||||
| CjuniAtmCircuitOamVpi | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current The VPI of the ATM VCC used by this ATM interface and PVC. | ||||
| CjuniAtmCircuitOamVci | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.3 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current The VCI of the ATM VCC used by this ATM interface and PVC. | ||||
| CjuniAtmCircuitOamAdminStatus | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative state of OAM for the interface identified by this entry.
| ||||
| CjuniAtmCircuitOamLoopbackOperStatus | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The operational status of OAM for the interface identified by this
entry.
oamOperStatusNotSupported(0) - OAM not supported on this interface
oamOperStatusDisabled(1) - VC integrity disabled
oamOperStatusSent(2) - Loopback sent, awaiting response
oamOperStatusReceived(3) - Loopback response received, awaiting
frequency
oamOperStatusFailed(4) - Loopback response not received, or
invalid response received
| ||||
| CjuniAtmCircuitVcOamOperStatus | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The OAM VC operational status of this entry.
oamVcOperStateAisState(0) - AIS cell received or underlying
physical layer reporting transmission
path AIS
oamVcOperStateRdiState(1) - RDI cell received
oamVcOperStateDownRetry(2) - OAM loopback failed, using retry
frequency to verify that the VC is
really down
oamVcOperStateUpRetry(3) - OAM loopback successful, using retry
frequency to verify that the VC is
really up
oamVcOperStateUp(4) - OAM loopback successful after up retry
verification
oamVcOperStateDown(5) - OAM loopback failed after down retry
verification
oamVcOperStateNotManaged(6)- No verification via loopback cells
being performed
oamVcOperStateVpAis(7) - F4 AIS cell received
oamVcOperStateVpRdi(8) - F4 RDI cell received
oamVcOperStateVcInVpRdi(9) - F4 RDI cell received; path failure
oamVcOperStateVcInVpAis(10)- F4 AIS cell received; path failure
oamVcOperStateSegAis(11) - Segment AIS cell received
oamVcOperStateSegRdi(12) - Segment RDI cell received
oamVcOperStateGenAis(13) - Connection failure; generating AIS
cells.
| ||||
| CjuniAtmCircuitOamLoopbackFrequency | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.7 | Integer32 (1..600) | RW | |
column · Integer32 (1..600) · read-write · current The OAM loopback frequency in seconds.
| ||||
| CjuniAtmCircuitInOamF5Cells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F5 cells.
| ||||
| CjuniAtmCircuitInOamCellsDropped | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM cells that were dropped.
| ||||
| CjuniAtmCircuitOutOamF5Cells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F5 cells.
| ||||
| CjuniAtmCircuitInOamF5EndToEndLoopbackCells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current Total received OAM F5 end-to-end loopback cells. Aggregate of juniAtmCircuitInOamF5EndToEndLoopbackCmds and juniAtmCircuitInOamF5EndToEndLoopbackRsps
| ||||
| CjuniAtmCircuitInOamF5SegmentLoopbackCells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current Total received OAM F5 segment loopback cells. Aggregate of juniAtmCircuitInOamF5SegmentLoopbackCmds and juniAtmCircuitInOamF5SegmentLoopbackRsps
| ||||
| CjuniAtmCircuitInOamF5AisCells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F5 AIS cells.
| ||||
| CjuniAtmCircuitInOamF5RdiCells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F5 RDI cells.
| ||||
| CjuniAtmCircuitOutOamF5EndToEndLoopbackCells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current Total transmitted OAM F5 end-to-end loopback cells. Aggregate of juniAtmCircuitOutOamF5EndToEndLoopbackCmds and juniAtmCircuitOutOamF5EndToEndLoopbackRsps
| ||||
| CjuniAtmCircuitOutOamF5SegmentLoopbackCells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Total transmitted OAM F5 segment loopback cells. Aggregate of juniAtmCircuitOutOamF5SegmentLoopbackCmds and juniAtmCircuitOutOamF5SegmentLoopbackRsps
| ||||
| CjuniAtmCircuitOutOamF5RdiCells | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F5 RDI cells.
| ||||
| CjuniAtmCircuitInOamF5EndToEndLoopbackCmds | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F5 end-to-end loopback commands.
| ||||
| CjuniAtmCircuitInOamF5EndToEndLoopbackRsps | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F5 end-to-end loopback responses.
| ||||
| CjuniAtmCircuitInOamF5SegmentLoopbackCmds | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F5 segment loopback commands.
| ||||
| CjuniAtmCircuitInOamF5SegmentLoopbackRsps | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current Received OAM F5 segment loopback responses.
| ||||
| CjuniAtmCircuitOutOamF5EndToEndLoopbackCmds | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F5 end-to-end loopback commands.
| ||||
| CjuniAtmCircuitOutOamF5EndToEndLoopbackRsps | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F5 end-to-end loopback responses.
| ||||
| CjuniAtmCircuitOutOamF5SegmentLoopbackCmds | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F5 segment loopback commands.
| ||||
| CjuniAtmCircuitOutOamF5SegmentLoopbackRsps | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current Transmitted OAM F5 segment loopback responses.
| ||||
| CjuniAtmCircuitOamUpCount | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.26 | Integer32 (1..60) | RW | |
column · Integer32 (1..60) · read-write · current Specifies the number of successive loopback cell responses to receive before a PVC is up for connectivity verification.
| ||||
| CjuniAtmCircuitOamDownCount | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.27 | Integer32 (1..60) | RW | |
column · Integer32 (1..60) · read-write · current Specifies the number of successive loopback cell responses not received before declaring a PVC down for connectivity verification.
| ||||
| CjuniAtmCircuitOamRetryFrequency | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.28 | Integer32 (1..600) | RW | |
column · Integer32 (1..600) · read-write · current Specifies the frequency (in seconds) to transmit loopback cells when verifying PVC state (up or down) for connectivity verification.
| ||||
| CjuniAtmCircuitOamAlarmDownCount | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.29 | Integer32 (1..60) | RW | |
column · Integer32 (1..60) · read-write · current Specifies the number of successive alarm (AIS or RDI) cells to receive before declaring a PVC down.
| ||||
| CjuniAtmCircuitOamAlarmClearTimeout | 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.30 | Integer32 (3..60) | RW | |
column · Integer32 (3..60) · read-write · current Specifies how long to wait (in seconds) before declaring a PVC up after it has stopped receiving alarm cells.
| ||||
| TjuniAtmSubIfVccTrafficShapingTable | 1.3.6.1.4.1.4874.2.2.8.1.3.5 | NA | ||
table · not-accessible · current This table contains entries for traffic shaping of ATM VCCs configured on ATM subinterfaces present in the system. This table augments the juniAtmSubIfVccTable only for VCCs that support traffic shapping. Attributes in this entry can only be configured at entry creation, and remain fixed for the lifetime of the entry. | ||||
| RjuniAtmSubIfVccTrafficShapingEntry | 1.3.6.1.4.1.4874.2.2.8.1.3.5.1 | NA | ||
row · not-accessible · current Each entry describes the traffic shping characteristics of an ATM subinterface VCC.
| ||||
| CjuniAtmSubIfVccTrafficShapingCdvt | 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.1 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The network cell delay variation tolerance (CDVT) in tenths of a microsecond.
| ||||
| CjuniAtmSubIfVccTrafficShapingClp0 | 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current Specifies whether or not only CLP0 cells are to be policed according to the traffic contract. CLP1 cells are forwarded on a best-effort basis CLP-significant model for (VBR.2, VBR.3 conformance). Applicable only for VBR circuits. | ||||
| CjuniAtmSubIfVccTrafficShapingTagging | 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current Specifies whether or not CLP0 cells should be tagged for SCR policing (VBR.3 conformance). Applicable only for VBR circuits. | ||||
| CjuniAtmSubIfVccTrafficShapingPoliceObserve | 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Specifies whether of not no policing action is to be taken (note the double negative; if true(1) then no policing action will be taken; if false(2) then policing action will be taken). Regardless of the state of this object, all counters will be incremented. | ||||
| CjuniAtmSubIfVccTrafficShapingPacketShaping | 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current Specifies whether of not to shape output traffic on a packet boundary. | ||||
| TjuniAtmSubIfSvcConfigTable | 1.3.6.1.4.1.4874.2.2.8.1.3.6 | NA | deprecated | |
table · not-accessible · deprecated This table contains entries for extending the juniAtmSubIfTable to configure switched virtual connection (SVC) on the subinterfaces. | ||||
| RjuniAtmSubIfSvcConfigEntry | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1 | NA | deprecated | |
row · not-accessible · deprecated Each entry provides configuration parameters for an ATM SVC on the subinterface.
| ||||
| CjuniAtmSubIfSvcRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.1 | RowStatus | RC | deprecated |
column · RowStatus · read-create · deprecated Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy | ||||
| CjuniAtmSubIfSvcConfigDestAtmAddress | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.2 | AtmAddr (SIZE (20)) | RC | deprecated |
column · AtmAddr (SIZE (20)) · read-create · deprecated Specifies the destination ATM NSAP address of the circuit. | ||||
| CjuniAtmSubIfSvcConfigCircuitType | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.3 | INTEGER | RC | deprecated |
column · INTEGER · read-create · deprecated Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM.
| ||||
| CjuniAtmSubIfSvcConfigServiceCategory | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.4 | INTEGER | RC | deprecated |
column · INTEGER · read-create · deprecated Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable Bit Rate. cbr Constant Bit Rate. rtVbr Realtime Variable Bit Rate.
| ||||
| CjuniAtmSubIfSvcConfigPcr | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.5 | Unsigned32 | RC | deprecated |
column · Unsigned32 · read-create · deprecated Peak Cell Rate, in kilo-bits per second (kbps), of this circuit.
| ||||
| CjuniAtmSubIfSvcConfigScr | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.6 | Unsigned32 | RC | deprecated |
column · Unsigned32 · read-create · deprecated Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit.
| ||||
| CjuniAtmSubIfSvcConfigMbs | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.7 | Unsigned32 | RC | deprecated |
column · Unsigned32 · read-create · deprecated Maximum Burst Size, in cells, of this circuit.
| ||||
| CjuniAtmSubIfSvcConfigCdvt | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.8 | Unsigned32 | RC | obsolete |
column · Unsigned32 · read-create · obsolete Specify the network Cell Delay Variation Tolerance.
| ||||
| CjuniAtmSubIfSvcConfigClp0 | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.9 | TruthValue | RC | deprecated |
column · TruthValue · read-create · deprecated Specify that only CLP0 cells are to be policed according to the traffic contract. CLP1 cells are forwarded on a best-effort basis CLP-significant model for (VBR.2, VBR.3 conformance). | ||||
| CjuniAtmSubIfSvcConfigTagging | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.10 | TruthValue | RC | deprecated |
column · TruthValue · read-create · deprecated Specify that CLP0 cells should be tagged for SCR policing (VBR.3 conformance). | ||||
| CjuniAtmSubIfSvcConfigObserve | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.11 | TruthValue | RC | obsolete |
column · TruthValue · read-create · obsolete Specify that no policing action is to be taken; only counters are incremented. | ||||
| CjuniAtmSubIfSvcConfigPacketDiscard | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.12 | TruthValue | RC | deprecated |
column · TruthValue · read-create · deprecated Enable early packet Discard for this circuit. | ||||
| CjuniAtmSubIfSvcConfigDestE164Address | 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.13 | AtmAddr (SIZE (0 | 8)) | RC | obsolete |
column · AtmAddr (SIZE (0 | 8)) · read-create · obsolete Specifies the destination ATM E164 address of the circuit. | ||||
| SjuniAtmSubIfDescriptionExport | 1.3.6.1.4.1.4874.2.2.8.1.3.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enabling of this object will program the subinterface description down to the applicable line card. Note, the subinterface description sent down to the line card is a truncated version (32 bytes) of the ifAlias. | ||||
| NjuniAtmNbma | 1.3.6.1.4.1.4874.2.2.8.1.4 | |||
| TjuniAtmNbmaMapTable | 1.3.6.1.4.1.4874.2.2.8.1.4.1 | NA | ||
table · not-accessible · current This table contains entries for ATM NBMA maps. | ||||
| RjuniAtmNbmaMapEntry | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an ATM NBMA map. | ||||
| CjuniAtmNbmaMapName | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.1 | JuniAtmNbmaMapName | NA | |
column · JuniAtmNbmaMapName · not-accessible · current The NBMA map name. | ||||
| CjuniAtmNbmaMapVcd | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.2 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current An integer identifier for the ATM circuit, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM interface. | ||||
| CjuniAtmNbmaMapIpAddress | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address associated with this entry. | ||||
| CjuniAtmNbmaMapVpi | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.4 | AtmVpIdentifier | RO | |
column · AtmVpIdentifier · read-only · current The VPI identifier of the ATM circuit. | ||||
| CjuniAtmNbmaMapVci | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.5 | AtmVcIdentifier | RO | |
column · AtmVcIdentifier · read-only · current The VCI identifier of the ATM circuit. | ||||
| CjuniAtmNbmaMapIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.6 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The ifIndex of the ATM major interface associated with this entry. The value of this object will be zero when the map is not applied to an interface. | ||||
| CjuniAtmNbmaMapBroadcast | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current The broadcast enable/disable setting for this entry. The value true(1) enable broadcast support; disable(2) disabled broadcast support for this entry. | ||||
| CjuniAtmNbmaMapRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
Additional notes to aid the network manager:
- NBMA maps are not supported on dynamic interface.
- NBMA maps can only be applied to a single major ATM interface at a
time.
- NBMA maps cannot be deleted unless the map is removed from the ATM
interface (juniAtmNbmaMapIfIndex = 0).
- The values of juniAtmNbmaMapVpi, juniAtmNbmaMapVci and
juniAtmNbmaMapIfIndex are zero until the map is applied to a major
ATM interface.
- To create an entry in this table, the following objects must be
present in the set PDU:
juniAtmNbmaMapIpAddress
juniAtmNbmaMapBroadcast
juniAtmNbmaMapRowStatus
- Once created, only the following objects can be modified:
juniAtmNbmaMapBroadcast | ||||
| TjuniAtmNbmaMapListTable | 1.3.6.1.4.1.4874.2.2.8.1.4.2 | NA | ||
table · not-accessible · current This table contains entries for ATM NBMA map lists. | ||||
| RjuniAtmNbmaMapListEntry | 1.3.6.1.4.1.4874.2.2.8.1.4.2.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an ATM NBMA map. | ||||
| CjuniAtmNbmaMapListName | 1.3.6.1.4.1.4874.2.2.8.1.4.2.1.1 | JuniAtmNbmaMapName | NA | |
column · JuniAtmNbmaMapName · not-accessible · current The NBMA Map List name. | ||||
| CjuniAtmNbmaMapListRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.4.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy | ||||
| NjuniAtmPing | 1.3.6.1.4.1.4874.2.2.8.1.5 | |||
| NjuniAtmPingTestTypes | 1.3.6.1.4.1.4874.2.2.8.1.5.1 | |||
| NjuniAtmPingTestOamSeg | 1.3.6.1.4.1.4874.2.2.8.1.5.1.1 | |||
node · current This identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC,
VCL, or VCC termination point, using segment OAM cells.
The test type must have appended to it a code that uniquely identifies
an intermediate point responsible for looping back each cell. If this
is absent, the loopbacks are performed at the end of the segment or
connection.
E.g., the OID { juniAtmPingTestOamSeg 5 } identifies that the loopbacks
should be performed at the intermediate point labeled 5. | ||||
| NjuniAtmPingTestOamE2E | 1.3.6.1.4.1.4874.2.2.8.1.5.1.2 | |||
node · current This identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC, VCL, or VCC termination point, using end-to-end OAM cells. | ||||
| TjuniAtmVpPingTable | 1.3.6.1.4.1.4874.2.2.8.1.5.2 | NA | ||
table · not-accessible · current This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB atmM4VpTestTable to do ping (multiple loopback) type testing. | ||||
| RjuniAtmVpPingEntry | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics, status and results of the most recent ATM ping test.
| ||||
| CjuniAtmVpPingProbeCount | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.1 | Unsigned32 (1..32) | RW | |
column · Unsigned32 (1..32) · read-write · current The number of ping probes (OAM cells) to be sent to complete the test.
| ||||
| CjuniAtmVpPingTimeOut | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.2 | Unsigned32 (1..5) | RW | |
column · Unsigned32 (1..5) · read-write · current Specifies the time-out value, in seconds, for a remote ping operation.
| ||||
| CjuniAtmVpPingCtlTrapGeneration | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.3 | Bits | RW | |
column · Bits · read-write · current The value of this object determines when and if to generate a notification for this entry: testCompletion(0) - Generate a juniPingTestCompleted notification. The value of this object defaults to zero, indicating that no notification has been selected.
| ||||
| CjuniAtmVpPingSentProbes | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ping probes (OAM cells) that have been sent thus far for this test. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1).
| ||||
| CjuniAtmVpPingProbeResponses | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ping responses that have been received thus far for this test. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1).
| ||||
| CjuniAtmVpPingStartTime | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.6 | TimeStamp | RO | |
column · TimeStamp · read-only · current The time (sysUpTime) when the test started. | ||||
| CjuniAtmVpPingMinRtt | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The shortest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
| ||||
| CjuniAtmVpPingMaxRtt | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The longest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
| ||||
| CjuniAtmVpPingAverageRtt | 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The average round-trip-time (RTT) for all the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
| ||||
| TjuniAtmVcPingTable | 1.3.6.1.4.1.4874.2.2.8.1.5.3 | NA | ||
table · not-accessible · current This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB atmM4VcTestTable to do ping (multiple loopback) type testing. | ||||
| RjuniAtmVcPingEntry | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics, status and results of the most recent ATM ping test.
| ||||
| CjuniAtmVcPingProbeCount | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.1 | Unsigned32 (1..32) | RW | |
column · Unsigned32 (1..32) · read-write · current The number of ping probes (OAM cells) to be sent to complete the test.
| ||||
| CjuniAtmVcPingTimeOut | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.2 | Unsigned32 (1..5) | RW | |
column · Unsigned32 (1..5) · read-write · current Specifies the time-out value, in seconds, for a remote ping operation.
| ||||
| CjuniAtmVcPingCtlTrapGeneration | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.3 | Bits | RW | |
column · Bits · read-write · current The value of this object determines when and if to generate a
notification for this entry:
testCompletion(0) - Generate a juniPingTestCompleted notification.
The value of this object defaults to zero, indicating that no
notification has been selected.
| ||||
| CjuniAtmVcPingSentProbes | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ping probes (OAM cells) that have been sent thus far for this test. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1).
| ||||
| CjuniAtmVcPingProbeResponses | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ping responses that have been received thus far for this test. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1).
| ||||
| CjuniAtmVcPingStartTime | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.6 | TimeStamp | RO | |
column · TimeStamp · read-only · current The time (sysUpTime) when the test started. | ||||
| CjuniAtmVcPingMinRtt | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The shortest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
| ||||
| CjuniAtmVcPingMaxRtt | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The longest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
| ||||
| CjuniAtmVcPingAverageRtt | 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The average round-trip-time (RTT) for all the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
| ||||
| NjuniAtmPingTestCode | 1.3.6.1.4.1.4874.2.2.8.1.5.4 | |||
| NjuniAtmPingTestCodeOamDisabled | 1.3.6.1.4.1.4874.2.2.8.1.5.4.1 | |||
node · current This test code indicates that the ATM ping operation cannot be initiated or is aborted because the juniAtmIfOamCellRxAdminState is set to disabled. | ||||
| NjuniAtmPingTestCodeCircuitDown | 1.3.6.1.4.1.4874.2.2.8.1.5.4.2 | |||
node · current This test code indicates that the ATM ping operation cannot be initiated or is aborted because the operational status of the ATM circuit is down. | ||||
| NjuniAtmPingTestCodeStopped | 1.3.6.1.4.1.4874.2.2.8.1.5.4.3 | |||
node · current This test code indicates that the ATM ping operation is administratively stopped by an External Management. | ||||
| NjuniAtmPingTestCodeOamVcOperState | 1.3.6.1.4.1.4874.2.2.8.1.5.4.4 | |||
node · current This test code indicates that the ATM ping operation cannot be
initiated or is aborted because the circuit is down because of a OAM
fault condition. This is possible if juniAtmCircuitVcOamOperStatus is
one of the following:
oamVcOperStateAisState(0) - AIS cell received or underlying
physical layer reporting transmission
path AIS.
oamVcOperStateRdiState(1) - RDI cell received. | ||||
| NjuniAtmPingTestCodeMaxPingCountReached | 1.3.6.1.4.1.4874.2.2.8.1.5.4.5 | |||
node · current This test code indicates that the ping operation cannot be initiated as the maximum number of ping possible on this interfaces exceeds the allowable limit. | ||||
| NjuniAtmPingTestCodeInvalidParams | 1.3.6.1.4.1.4874.2.2.8.1.5.4.6 | |||
node · current This Test Code identities the Ping operation cannot be initiated as one or more of the Ping Parameters is Invalid. | ||||
| NjuniAtmLocation | 1.3.6.1.4.1.4874.2.2.8.1.6 | |||
| SjuniAtmSubIfLocationType | 1.3.6.1.4.1.4874.2.2.8.1.6.1 | JuniInterfaceLocationType | RO | |
scalar · JuniInterfaceLocationType · read-only · current Describes the interpretation of JuniInterfaceLocationValue object values into platform-dependent interface location components, e.g., 'slot.port' on an ERX. | ||||
| TjuniAtmSubIfLocationTable | 1.3.6.1.4.1.4874.2.2.8.1.6.2 | NA | ||
table · not-accessible · current The entries in this table report the ifIndex of ATM Subinterfaces by location. | ||||
| RjuniAtmSubIfLocationEntry | 1.3.6.1.4.1.4874.2.2.8.1.6.2.1 | NA | ||
row · not-accessible · current A specification of ATM subinterfaces by location. | ||||
| CjuniAtmSubIfLocationIndex | 1.3.6.1.4.1.4874.2.2.8.1.6.2.1.1 | JuniInterfaceLocationValue | NA | |
column · JuniInterfaceLocationValue · not-accessible · current The value of a platform interface location. | ||||
| CjuniAtmSubIfLocationIfIndex | 1.3.6.1.4.1.4874.2.2.8.1.6.2.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex value of this subinterface. | ||||
| NjuniAtmVcClass | 1.3.6.1.4.1.4874.2.2.8.1.7 | |||
| TjuniAtmVcClassNameTable | 1.3.6.1.4.1.4874.2.2.8.1.7.1 | NA | ||
table · not-accessible · current The entries in this table provide mappings of ATM VC class names to local integer identifiers. These integers are used as indexes into other MIB tables containing ATM VC attributes associated with the same VC class name. | ||||
| RjuniAtmVcClassNameEntry | 1.3.6.1.4.1.4874.2.2.8.1.7.1.1 | NA | ||
row · not-accessible · current A mapping of ATM VC class name to an integer identifier for the ATM VC class.
| ||||
| CjuniAtmVcClassName | 1.3.6.1.4.1.4874.2.2.8.1.7.1.1.1 | DisplayString (SIZE (1..32)) | RO | |
column · DisplayString (SIZE (1..32)) · read-only · current The ATM VC class name uniquely identifying this entry. | ||||
| CjuniAtmVcClassNameRowStatus | 1.3.6.1.4.1.4874.2.2.8.1.7.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table. Only the values 'createAndGo' ,'destroy', 'active' and 'notInService' may be SET. The SNMP manager would set the row status to notInService before making any VC class attribute changes explained in juniAtmVcClassTable. Once the VC class attribute changes are complete, the SNMP manager would set the row status to active, upon which the VC class attribute changes would be committed. Any ATM VC class attribute changes that are made when the row status is 'active' are committed right away. | ||||
| CjuniAtmVcClassNameId | 1.3.6.1.4.1.4874.2.2.8.1.7.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The integer identifier associated with this VC class name. The value of this identifier is assigned by the device when an entry in this table is created. | ||||
| TjuniAtmVcClassIdTable | 1.3.6.1.4.1.4874.2.2.8.1.7.2 | NA | ||
table · not-accessible · current Provides inverse mapping of ATM VC class IDs to ATM VC class names. | ||||
| RjuniAtmVcClassIdEntry | 1.3.6.1.4.1.4874.2.2.8.1.7.2.1 | NA | ||
row · not-accessible · current A mapping of an integer identifier to an ATM VC class name.
| ||||
| CjuniAtmVcClassIdId | 1.3.6.1.4.1.4874.2.2.8.1.7.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The integer identifier associated with this ATM VC class name. | ||||
| CjuniAtmVcClassIdName | 1.3.6.1.4.1.4874.2.2.8.1.7.2.1.2 | DisplayString (SIZE (1..32)) | RO | |
column · DisplayString (SIZE (1..32)) · read-only · current The ATM VC class name having the associated identifier. | ||||
| TjuniAtmVcClassTable | 1.3.6.1.4.1.4874.2.2.8.1.7.3 | NA | ||
table · not-accessible · current This table contains Juniper ATM VC Class entries which can be used to specify the ATM PVC attributes either at creation or modification time. A row in this table with default values is created when an entry in juniAtmVcClassNameTable is created. | ||||
| RjuniAtmVcClassEntry | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1 | NA | ||
row · not-accessible · current Each entry contains the attributes of the ATM VC which would be applied to the VC either at creation or modification time when this ATM VC class is associated to it.
| ||||
| CjuniAtmVcClassId | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The integer identifier associated with this ATM VC class. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAtmVcClassNameTable. | ||||
| CjuniAtmVcClassVccType | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. The 'autoconfig' value will recognize both VC Mux and LLC formats. The 'aal5' and 'aal0' values are used for encapsulation methods for transport of ATM frames and cells over IP and MPLS networks when no encapsulation method is specified.
| ||||
| CjuniAtmVcClassVccServiceCategory | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable Bit Rate. cbr Constant Bit Rate. rtVbr Realtime Variable Bit Rate.
| ||||
| CjuniAtmVcClassVccPcr | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4 | Integer32 (0..2147483647) | RW | |
column · Integer32 (0..2147483647) · read-write · current Peak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory is
configured to have one of the following values:
ubrPcr
nrtVbr
cbr
rtVbr
| ||||
| CjuniAtmVcClassVccScr | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5 | Integer32 (0..2147483647) | RW | |
column · Integer32 (0..2147483647) · read-write · current Sustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following value:
nrtVbr
rtVbr
| ||||
| CjuniAtmVcClassVccMbs | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6 | Integer32 (0..16777215) | RW | |
column · Integer32 (0..16777215) · read-write · current Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configured to have the following value: nrtVbr rtVbr
| ||||
| CjuniAtmVcClassVccOamAdminStatus | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The OAM VC integrity administrative state of the ATM VC associated with this class.
| ||||
| CjuniAtmVcClassVccOamLoopbackFrequency | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.8 | Integer32 (1..600) | RW | |
column · Integer32 (1..600) · read-write · current The OAM loopback frequency in seconds.
| ||||
| CjuniAtmVcClassVccOamUpCount | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9 | Integer32 (1..60) | RW | |
column · Integer32 (1..60) · read-write · current Specifies the number of successive loopback cell responses to receive before the ATM VC associated with this class is declared up for connectivity verification.
| ||||
| CjuniAtmVcClassVccOamDownCount | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10 | Integer32 (1..60) | RW | |
column · Integer32 (1..60) · read-write · current Specifies the number of successive loopback cell responses not received before declaring the ATM VC associated with this class as down for connectivity verification.
| ||||
| CjuniAtmVcClassVccOamRetryFrequency | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11 | Integer32 (1..600) | RW | |
column · Integer32 (1..600) · read-write · current Specifies the frequency (in seconds) to transmit loopback cells when verifying the ATM VC operational state associated with this class (up or down) for connectivity verification.
| ||||
| CjuniAtmVcClassVccOamAlarmDownCount | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12 | Integer32 (1..60) | RW | |
column · Integer32 (1..60) · read-write · current Specifies the number of successive alarm (AIS or RDI) cells to receive before declaring the ATM VC associated with class as down.
| ||||
| CjuniAtmVcClassVccOamAlarmClearTimeout | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13 | Integer32 (3..60) | RW | |
column · Integer32 (3..60) · read-write · current Specifies how long to wait (in seconds) before declaring the ATM VC associated with class as up after it has stopped receiving alarm cells.
| ||||
| CjuniAtmVcClassVccInverseArp | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current Enables the inverse ARP protocol on the ATM VC associated with this class; true(1) enables the protocol, false(2) disables it. | ||||
| CjuniAtmVcClassVccInverseArpRefresh | 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15 | Integer32 (0..60) | RW | |
column · Integer32 (0..60) · read-write · current The refresh rate in minutes between inverse ARP protocol messages.
| ||||
| NjuniAtmTraps | 1.3.6.1.4.1.4874.2.2.8.3 | |||
| NjuniAtmTrapPrefix | 1.3.6.1.4.1.4874.2.2.8.3.0 | |||
| !juniAtmVpPingTestCompleted | 1.3.6.1.4.1.4874.2.2.8.3.0.1 | |||
notification · current Generated at the completion of a AtmfM4VpTest when the corresponding juniAtmVpPingCtlTrapGeneration object has the testCompletion(0) bit set. | ||||
| !juniAtmVcPingTestCompleted | 1.3.6.1.4.1.4874.2.2.8.3.0.2 | |||
notification · current Generated at the completion of a AtmfM4VcTest when the corresponding juniAtmVcPingCtlTrapGeneration object has the testCompletion(0) bit set. | ||||
| NjuniAtmConformance | 1.3.6.1.4.1.4874.2.2.8.4 | |||
| NjuniAtmCompliances | 1.3.6.1.4.1.4874.2.2.8.4.1 | |||
| MjuniAtmCompliance | 1.3.6.1.4.1.4874.2.2.8.4.1.1 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when support was added for NBMA map lists and ATM ping. | ||||
| MjuniAtmCompliance2 | 1.3.6.1.4.1.4874.2.2.8.4.1.2 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when support was added for traffic shapping on VCC subinterfaces. | ||||
| MjuniAtmCompliance3 | 1.3.6.1.4.1.4874.2.2.8.4.1.3 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when support was added for connection admission control (CAC). | ||||
| MjuniAtmCompliance4 | 1.3.6.1.4.1.4874.2.2.8.4.1.4 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when ATM SVC, CAC used bandwidth and sub-interface address objects were added. | ||||
| MjuniAtmCompliance5 | 1.3.6.1.4.1.4874.2.2.8.4.1.5 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when CAC recieve bandwith and E164 public addressing support was added. | ||||
| MjuniAtmCompliance6 | 1.3.6.1.4.1.4874.2.2.8.4.1.6 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when F4 flow OAM circuit config and stats tables were added to the Juniper ATM MIB. | ||||
| MjuniAtmCompliance7 | 1.3.6.1.4.1.4874.2.2.8.4.1.7 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when the juniAtmLocationGroup was added. | ||||
| MjuniAtmCompliance8 | 1.3.6.1.4.1.4874.2.2.8.4.1.8 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when support was added to export the subinterface description to the line cards. | ||||
| MjuniAtmCompliance9 | 1.3.6.1.4.1.4874.2.2.8.4.1.9 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement was obsoleted when the juniAtmMartiniGroup was added. | ||||
| MjuniAtmCompliance10 | 1.3.6.1.4.1.4874.2.2.8.4.1.10 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when juniAtmIfCacAvailableBandwidthRx, juniAtmIfE164Autoconversion, juniAtmIfE164Gateway, and juniAtmIfE164OneToOneAddrTrans were deprecated.
| ||||
| MjuniAtmCompliance11 | 1.3.6.1.4.1.4874.2.2.8.4.1.11 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when juniAtmGroup8 was added.
| ||||
| MjuniAtmCompliance12 | 1.3.6.1.4.1.4874.2.2.8.4.1.12 | obsolete | ||
compliance · obsolete The compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when juniAtmVpStatsGroup was added.
| ||||
| MjuniAtmCompliance13 | 1.3.6.1.4.1.4874.2.2.8.4.1.13 | obsolete | ||
compliance · obsolete The compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when SVC support was removed.
| ||||
| MjuniAtmCompliance14 | 1.3.6.1.4.1.4874.2.2.8.4.1.14 | |||
compliance · current The compliance statement for entities which implement the Juniper ATM MIB.
| ||||
| NjuniAtmGroups | 1.3.6.1.4.1.4874.2.2.8.4.2 | |||
| GjuniAtmGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.1 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when the juniAtmIfMapGroup object was added.
| ||||
| GjuniAtmAal5Group | 1.3.6.1.4.1.4874.2.2.8.4.2.2 | |||
group · current A collection of objects providing management of AAL5 interfaces in a Juniper product. | ||||
| GjuniAtmSubIfGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.3 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when juniAtmSubIfNbma, juniAtmSubIfInverseArp, and juniAtmSubIfInverseArpRefresh were added.
| ||||
| GjuniAtmVpTunnelGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.4 | |||
group · current A collection of objects providing management of VP tunnels in a Juniper product. | ||||
| GjuniAtmNbmaMapGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.5 | |||
group · current A collection of object providing management of NBMA in a Juniper product. | ||||
| GjuniAtmSubIfGroup2 | 1.3.6.1.4.1.4874.2.2.8.4.2.6 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when juniAtmSubIfAddress was added.
| ||||
| GjuniAtmVpPingControlGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.7 | |||
group · current A collection of object providing management of ATM VPL Ping testing in a Juniper product. | ||||
| GjuniAtmVcPingControlGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.8 | |||
group · current A collection of object providing management of ATM VCL Ping testing in a Juniper product. | ||||
| GjuniAtmPingTrapGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.9 | |||
group · current A collection of notifications supporting ATM Ping testing in a Juniper product. | ||||
| GjuniAtmGroup2 | 1.3.6.1.4.1.4874.2.2.8.4.2.10 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when support was added for connection admission control (CAC).
| ||||
| GjuniAtmTrafficShapingGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.11 | |||
group · current A collection of objects providing management of ATM traffic shaping in a Juniper product. | ||||
| GjuniAtmGroup3 | 1.3.6.1.4.1.4874.2.2.8.4.2.12 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when support was added for connection admission control (CAC) used bandwidth.
| ||||
| GjuniAtmGroup4 | 1.3.6.1.4.1.4874.2.2.8.4.2.13 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when CAC recieve bandwith and E164 public addressing objects were added.
| ||||
| GjuniAtmSvcGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.14 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM SVC interfaces in a Juniper product. This group became obsolete when E164 public addressing support was added.
| ||||
| GjuniAtmSubIfGroup3 | 1.3.6.1.4.1.4874.2.2.8.4.2.15 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when juniAtmSubIfMtu was added.
| ||||
| GjuniAtmGroup5 | 1.3.6.1.4.1.4874.2.2.8.4.2.16 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when ATM VP description support was added.
| ||||
| GjuniAtmSvcGroup2 | 1.3.6.1.4.1.4874.2.2.8.4.2.17 | |||
group · current A collection of objects providing management of ATM SVC interfaces in a Juniper product.
| ||||
| GjuniAtmPnniGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.18 | |||
group · current A collection of objects providing management of PNNI Routing Control Channels in a Juniper product. | ||||
| GjuniAtmSubIfGroup4 | 1.3.6.1.4.1.4874.2.2.8.4.2.19 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when support was added to export the subinterface description to the line cards.
| ||||
| GjuniAtmF4OamCircuitGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.20 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM F4 flow OAM circuits in a Juniper product.
| ||||
| GjuniAtmGroup6 | 1.3.6.1.4.1.4874.2.2.8.4.2.21 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when bulk-configuration profile override support was added.
| ||||
| GjuniAtmLocationGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.22 | |||
group · current A collection of objects providing interface location information in a Juniper product. | ||||
| GjuniAtmSubIfGroup5 | 1.3.6.1.4.1.4874.2.2.8.4.2.23 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product.
| ||||
| GjuniAtmMartiniGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.24 | |||
group · current A collection of objects providing ATM Martini cell aggregation configuration. | ||||
| GjuniAtmGroup7 | 1.3.6.1.4.1.4874.2.2.8.4.2.25 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM interfaces in a Juniper product.
| ||||
| GjuniAtmGroup8 | 1.3.6.1.4.1.4874.2.2.8.4.2.26 | obsolete | ||
group · obsolete A collection of objects providing management of ATM interfaces in a Juniper product.
| ||||
| GjuniAtmVpStatsGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.27 | |||
group · current A collection of objects providing ATM VP level statistics.
| ||||
| GjuniAtmSubIfGroup6 | 1.3.6.1.4.1.4874.2.2.8.4.2.28 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when ATM SVC support was removed.
| ||||
| GjuniAtmF4OamCircuitGroup2 | 1.3.6.1.4.1.4874.2.2.8.4.2.29 | |||
group · current A collection of objects providing management of ATM F4 flow OAM circuits in a Juniper product.
| ||||
| GjuniAtmGroup9 | 1.3.6.1.4.1.4874.2.2.8.4.2.30 | |||
group · current A collection of objects providing management of ATM interfaces in a Juniper product.
| ||||
| GjuniAtmSubIfGroup7 | 1.3.6.1.4.1.4874.2.2.8.4.2.31 | |||
group · current A collection of objects providing management of ATM subinterfaces in a Juniper product.
| ||||
| GjuniAtmVcClassGroup | 1.3.6.1.4.1.4874.2.2.8.4.2.32 | |||
group · current A collection of objects providing management of ATM VC class in a Juniper product.
| ||||
Textual conventions
JuniAtmLocationTypeINTEGERslotPort(1)unknown(0)Obsolete description of the platform-dependent interpretation of a JuniAtmLocationValue object. This textual convention has been relpaced by Juniper-TC.JuniInterfaceLocationType.
JuniAtmLocationValueOCTET STRING (SIZE (1..16))Obsolete value of a platform-dependent interface location, represented as an OCTET STRING. A corresponding JuniAtmLocationType object identified the mapping of octets to location elements, e.g. 'slot.port'. This textual convention has been replaced by Juniper-TC.JuniInterfaceLocationValue.
JuniAtmNbmaMapNameOCTET STRING (SIZE (1..32))Display hint:
32aAn administratively assigned map name. Represents textual information taken from the NVT ASCII character set. The name must be unique per system.
JuniAtmNbmaMapNameOrNullOCTET STRING (SIZE (0..32))Display hint:
32aAn administratively assigned map name. Represents textual information taken from the NVT ASCII character set. The name must be unique per system. Differs from JuniAtmNbmaMapName in that it permits a zero-length string.
Traps / Notifications
- juniAtmVcPingTestCompleted
1.3.6.1.4.1.4874.2.2.8.3.0.2 - juniAtmVpPingTestCompleted
1.3.6.1.4.1.4874.2.2.8.3.0.1
Groups and compliance
- juniAtmAal5Group
- juniAtmCompliance
- juniAtmCompliance10
- juniAtmCompliance11
- juniAtmCompliance12
- juniAtmCompliance13
- juniAtmCompliance14
- juniAtmCompliance2
- juniAtmCompliance3
- juniAtmCompliance4
- juniAtmCompliance5
- juniAtmCompliance6
- juniAtmCompliance7
- juniAtmCompliance8
- juniAtmCompliance9
- juniAtmF4OamCircuitGroup
- juniAtmF4OamCircuitGroup2
- juniAtmGroup
- juniAtmGroup2
- juniAtmGroup3
- juniAtmGroup4
- juniAtmGroup5
- juniAtmGroup6
- juniAtmGroup7
- juniAtmGroup8
- juniAtmGroup9
- juniAtmLocationGroup
- juniAtmMartiniGroup
- juniAtmNbmaMapGroup
- juniAtmPingTrapGroup
- juniAtmPnniGroup
- juniAtmSubIfGroup
- juniAtmSubIfGroup2
- juniAtmSubIfGroup3
- juniAtmSubIfGroup4
- juniAtmSubIfGroup5
- juniAtmSubIfGroup6
- juniAtmSubIfGroup7
- juniAtmSvcGroup
- juniAtmSvcGroup2
- juniAtmTrafficShapingGroup
- juniAtmVcClassGroup
- juniAtmVcPingControlGroup
- juniAtmVpPingControlGroup
- juniAtmVpStatsGroup
- juniAtmVpTunnelGroup