Juniper-TSM-MIB
Juniper Networks/UnisphereThe Tunnel Server Management (TSM) MIB for the Juniper Networks enterprise.
snmptranslate -m Juniper-TSM-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-TSM-MIB <host> 1.3.6.1.4.1.4874.2.2.72Imports
| Juniper-MIBs | juniMibs |
|---|---|
| Juniper-UNI-IF-MIB | JuniIfType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniTsmMIB | 1.3.6.1.4.1.4874.2.2.72 | |||
identity The Tunnel Server Management (TSM) MIB for the Juniper Networks enterprise. | ||||
| NjuniTsmObjects | 1.3.6.1.4.1.4874.2.2.72.1 | |||
| NjuniTsmData | 1.3.6.1.4.1.4874.2.2.72.1.1 | |||
| SjuniTsmLocationType | 1.3.6.1.4.1.4874.2.2.72.1.1.1 | JuniTsmLocationType | RO | |
scalar · JuniTsmLocationType · read-only · current Describes the interpretation of JuniTsmLocationValue object values into platform-dependent interface location components, e.g., 'slot.port'. | ||||
| TjuniTsmPortTable | 1.3.6.1.4.1.4874.2.2.72.1.1.2 | NA | ||
table · not-accessible · current This table allows dynamic server ports to be configured and also provides information about static ports available in the system. This table represents all ports known to the system. The presence of a port in this table does not guarantee that a card with this port is present in the chassis. | ||||
| RjuniTsmPortEntry | 1.3.6.1.4.1.4874.2.2.72.1.1.2.1 | NA | ||
| CjuniTsmPortLocation | 1.3.6.1.4.1.4874.2.2.72.1.1.2.1.1 | JuniTsmLocationValue | NA | |
column · JuniTsmLocationValue · not-accessible · current The value of a port location. | ||||
| CjuniTsmPortType | 1.3.6.1.4.1.4874.2.2.72.1.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The port type:
generalPurposeStatic - statically configured (always on) port,
generalPurposeDynamic - dynamic port, which could be both
configured with different maximum number
of interfaces and unconfigured,
securityStatic - static port equipped with encryption
(IPSEC) hardware.
securityDynamic - dynamic port with encryption (IPSEC)
hardware, which could be both
configured with different maximum number
of interfaces and unconfigured.
| ||||
| CjuniTsmPortHwPresent | 1.3.6.1.4.1.4874.2.2.72.1.1.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current The port hardware is inserted. | ||||
| CjuniTsmPortAvailableInterfaces | 1.3.6.1.4.1.4874.2.2.72.1.1.2.1.4 | Integer32 (1..16000) | RO | |
column · Integer32 (1..16000) · read-only · current Maximum number of interfaces available on the port. | ||||
| CjuniTsmPortProvisionedInterfaces | 1.3.6.1.4.1.4874.2.2.72.1.1.2.1.5 | Integer32 (-1..16000) | RW | |
column · Integer32 (-1..16000) · read-write · current Number of interfaces provisioned on the port. '-1' means all available interfaces. If port is static this value cannot be changed. If the number of provisioned interfaces is decreased it may require a lengthy 'draining' process to bring number of allocated interfaces into compliance. | ||||
| TjuniTsmAppRegistryTable | 1.3.6.1.4.1.4874.2.2.72.1.1.3 | NA | ||
table · not-accessible · current This table describes currently registered applications. | ||||
| RjuniTsmAppRegistryEntry | 1.3.6.1.4.1.4874.2.2.72.1.1.3.1 | NA | ||
| CjuniTsmAppRegistryIndex | 1.3.6.1.4.1.4874.2.2.72.1.1.3.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current A small integer identifying registered application. Once an application is registered, this integer will be associated with the application until the next reboot. | ||||
| CjuniTsmAppRegistryIfType | 1.3.6.1.4.1.4874.2.2.72.1.1.3.1.2 | JuniIfType | RO | |
column · JuniIfType · read-only · current Interface type associated with the application. | ||||
| CjuniTsmAppRegistryName | 1.3.6.1.4.1.4874.2.2.72.1.1.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the application used by the system. | ||||
| CjuniTsmAppRegistryInterfaceLimit | 1.3.6.1.4.1.4874.2.2.72.1.1.3.1.4 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The maximum number of interfaces per port this application supports. (The number of interfaces could be further limited by the port capacity.) | ||||
| TjuniTsmApplicationTable | 1.3.6.1.4.1.4874.2.2.72.1.1.4 | NA | ||
table · not-accessible · current The entries in this table describe application load on tunnel servers. This table includes only applications which are actually being used. | ||||
| RjuniTsmApplicationEntry | 1.3.6.1.4.1.4874.2.2.72.1.1.4.1 | NA | ||
| CjuniTsmApplicationMaxInterfaces | 1.3.6.1.4.1.4874.2.2.72.1.1.4.1.1 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current Maximum number of interfaces available on the port for the application. Applications allocate interfaces from a common pool, so this is not the only limit of application level interfaces. This value could be greater than juniTsmPortProvisionedInterfaces when the port is draining interfaces. | ||||
| CjuniTsmApplicationActiveInterfaces | 1.3.6.1.4.1.4874.2.2.72.1.1.4.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of application interfaces in use on the port. This value could be greater than juniTsmPortProvisionedInterfaces when the port is draining interfaces. | ||||
| NjuniTsmMIBConformance | 1.3.6.1.4.1.4874.2.2.72.4 | |||
| NjuniTsmMIBCompliances | 1.3.6.1.4.1.4874.2.2.72.4.1 | |||
| MjuniTsmCompliance | 1.3.6.1.4.1.4874.2.2.72.4.1.1 | |||
| NjuniTsmMIBGroups | 1.3.6.1.4.1.4874.2.2.72.4.2 | |||
| GjuniTsmGroup | 1.3.6.1.4.1.4874.2.2.72.4.2.1 | |||
group · current A collection of objects providing management of TSM functionality in a Juniper product. | ||||
Textual conventions
JuniTsmLocationTypeINTEGERadapterPort(3)slotAdapterPort(2)slotPort(1)unknown(0)Describes the platform-dependent interpretation of a JuniTsmLocationValue object: unknown Unspecified/unknown slotPort Two octets in length; first octet is 'slot', second octet is 'port' slotAdapterPort Three octets in length; first octet is 'slot', second octet is 'adapter', third octet is 'port' adapterPort Two octets in length; first octet is 'adapter', second octet is 'port'JuniTsmLocationValueOCTET STRING (SIZE (1..16))The value of a platform-dependent interface location, represented as an OCTET STRING. A corresponding JuniTsmLocationType object will identify the mapping of octets to location elements, e.g. 'slot.port'. Note, when the value of an object having this syntax is encoded as a MIB table INDEX, the rules for encoding a variable-length OCTET STRING are observed.