Juniper-TACACS-Plus-Client-MIB
Juniper Networks/UnisphereThe Terminal Access Controller Access Control System Plus (TACACS+) Client MIB for the Juniper Networks enterprise.
snmptranslate -m Juniper-TACACS-Plus-Client-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-TACACS-Plus-Client-MIB <host> 1.3.6.1.4.1.4874.2.2.60Imports
| Juniper-MIBs | juniMibs |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniTacacsPlusClientMIB | 1.3.6.1.4.1.4874.2.2.60 | |||
identity The Terminal Access Controller Access Control System Plus (TACACS+) Client MIB for the Juniper Networks enterprise. | ||||
| NjuniTacacsPlusClientObjects | 1.3.6.1.4.1.4874.2.2.60.1 | |||
| NjuniTacacsPlusClientCommonConfig | 1.3.6.1.4.1.4874.2.2.60.1.1 | |||
| SjuniTacacsPlusClientDirectedRequest | 1.3.6.1.4.1.4874.2.2.60.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object represents directed-request option setting. In any of the enabled enabled states user name entered as `user@host' will be sent to specified host fot authentication. If `restricted' is in effect and the specified host is not available client would not try to use other hosts, if `truncated' is in effect, then `@host' part will be stripped before submission for authentication.
| ||||
| SjuniTacacsPlusClientTimeout | 1.3.6.1.4.1.4874.2.2.60.1.1.2 | INTEGER (0..255) | RW | |
scalar · INTEGER (0..255) · read-write · current TACACS+ host response timeout in seconds. Value 0 means 'not configured, it this case built-in internal timeout value will be used. | ||||
| SjuniTacacsPlusClientKey | 1.3.6.1.4.1.4874.2.2.60.1.1.3 | JuniKeyString | RW | |
scalar · JuniKeyString · read-write · current If the size is non-zero, packets passed between host and client will be encrypted. | ||||
| SjuniTacacsPlusClientSourceIp | 1.3.6.1.4.1.4874.2.2.60.1.1.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current If the value is is not 0.0.0.0 client will use this address as a source IP address for communication with servers. Changing this value would not affect existing connections. | ||||
| NjuniTacacsPlusClientHostConfig | 1.3.6.1.4.1.4874.2.2.60.1.2 | |||
| TjuniTacacsPlusClientHostConfigTable | 1.3.6.1.4.1.4874.2.2.60.1.2.1 | NA | ||
table · not-accessible · current This table contains per host configuration parameters. | ||||
| RjuniTacacsPlusClientHostConfigEntry | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1 | NA | ||
row · not-accessible · current A TACACS+ host statistics table entry. | ||||
| CjuniTacacsPlusClientHostAddr | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the host. | ||||
| CjuniTacacsPlusClientHostPort | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.2 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The TCP port of the host. | ||||
| CjuniTacacsPlusClientHostPrimary | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current Non-directed requests are submitted to the primary host first. There is only one primary host in the table. So, setting this object to true, will also change the value of this object in the current primary host. If primary host is deleted or reset, system will assing new primary host. When the first entry is created it becomes primary regardless of the value of this object. | ||||
| CjuniTacacsPlusClientHostSingleConnection | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Traditionally TACACS+ client creates a new TCP connection for every session. If this value is true then TACACS+ client will try to use single connection if supported both by client implementation and by the host. | ||||
| CjuniTacacsPlusClientHostTimeout | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.5 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current TACACS+ host response timeout in seconds. If the value is 0 then the value of juniTacacsPlusClientTimeout will be used instead. | ||||
| CjuniTacacsPlusClientHostKey | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.6 | JuniKeyString | RC | |
column · JuniKeyString · read-create · current If size is non-zero, packets passed between host and client will be encrypted with the key, otherwise the value of juniTacacsPlusClientKey will be used for the purpose. | ||||
| CjuniTacacsPlusClientHostStatus | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Status object, only `createAndGo' and 'destroy' are supported. | ||||
| CjuniTacacsPlusClientHostOrder | 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The search order of this TACACS+ host within all configured TACACS+ hosts. This MIB object indicates the order in which a TACACS+ request will be sent to the TACACS+ hosts until a response is received. The primary host is always the first host to be contacted. The remaining hosts will be contacted in the order that they were created. Should the primary host be deleted, the next host in the search order will become the primary host. | ||||
| NjuniTacacsPlusClientHostStats | 1.3.6.1.4.1.4874.2.2.60.1.3 | |||
| TjuniTacacsPlusClientHostStatsTable | 1.3.6.1.4.1.4874.2.2.60.1.3.1 | NA | ||
table · not-accessible · current This table contains per host statistics. | ||||
| RjuniTacacsPlusClientHostStatsEntry | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1 | NA | ||
row · not-accessible · current A TACACS+ host statistics table entry. | ||||
| CjuniTacacsPlusClientHostAuthRequests | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current Number of authentication requests sent to the host. | ||||
| CjuniTacacsPlusClientHostAuthReplies | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Number of authentication replies received from the host. | ||||
| CjuniTacacsPlusClientHostAuthPending | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Number of expected but not received authentication replies from the host. | ||||
| CjuniTacacsPlusClientHostAuthTimeouts | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Number of authentication timeouts for the host. | ||||
| CjuniTacacsPlusClientHostAuthorRequests | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Number of authorization requests sent to the host. | ||||
| CjuniTacacsPlusClientHostAuthorReplies | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Number of authorization replies received from the host. | ||||
| CjuniTacacsPlusClientHostAuthorPending | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Number of expected but not received authorization replies from the host. | ||||
| CjuniTacacsPlusClientHostAuthorTimeouts | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Number of authorization timeouts for the host. | ||||
| CjuniTacacsPlusClientHostAcctRequests | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Number of accounting requests sent to the host. | ||||
| CjuniTacacsPlusClientHostAcctReplies | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Number of accounting replies received from the host. | ||||
| CjuniTacacsPlusClientHostAcctPending | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current Number of expected but not received accounting replies from the host. | ||||
| CjuniTacacsPlusClientHostAcctTimeouts | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current Number of accounting timeouts for the host. | ||||
| CjuniTacacsPlusClientHostDiscontinuityTime | 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.13 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when corresponding juniTacacsPlusHostConfigEntry was created, this object containg zero if host entry was created during system initializatin. | ||||
| NjuniTacacsPlusClientConformance | 1.3.6.1.4.1.4874.2.2.60.2 | |||
| NjuniTacacsPlusClientCompliances | 1.3.6.1.4.1.4874.2.2.60.2.1 | |||
| MjuniTacacsPlusCompliance | 1.3.6.1.4.1.4874.2.2.60.2.1.1 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper TACACS+ Client MIB. | ||||
| MjuniTacacsPlusCompliance2 | 1.3.6.1.4.1.4874.2.2.60.2.1.2 | |||
compliance · current The compliance statement for entities which implement the Juniper TACACS+ Client MIB. | ||||
| NjuniTacacsPlusClientGroups | 1.3.6.1.4.1.4874.2.2.60.2.2 | |||
| GjuniTacacsPlusClientCommonGroup | 1.3.6.1.4.1.4874.2.2.60.2.2.1 | |||
group · current This group defines common configuration parameters for all hosts. | ||||
| GjuniTacacsPlusClientHostConfigGroup | 1.3.6.1.4.1.4874.2.2.60.2.2.2 | obsolete | ||
group · obsolete Obsolete group for defining per host configuration parameters. | ||||
| GjuniTacacsPlusClientHostStatsGroup | 1.3.6.1.4.1.4874.2.2.60.2.2.3 | |||
group · current This group defines statistics collected on per host basis.
| ||||
| GjuniTacacsPlusClientHostConfigGroup2 | 1.3.6.1.4.1.4874.2.2.60.2.2.4 | |||
group · current This group defines per host configuration parameters. | ||||
Textual conventions
JuniKeyStringOCTET STRING (SIZE (0..100))A string to keep a TACACS+ key. It may contain TAB character and/or any character from 0x20 to 0x7e inclusive. Its lenght is limited to 100. For security reasons it always reads as an empty string.