Juniper-SUBSCRIBER-MIB
Juniper Networks/UnisphereThe Subscriber MIB for the Juniper Networks enterprise.
snmptranslate -m Juniper-SUBSCRIBER-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-SUBSCRIBER-MIB <host> 1.3.6.1.4.1.4874.2.2.49Imports
| IF-MIB | InterfaceIndex |
|---|---|
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniSubscriberMIB | 1.3.6.1.4.1.4874.2.2.49 | |||
identity The Subscriber MIB for the Juniper Networks enterprise. | ||||
| NjuniSubscrObjects | 1.3.6.1.4.1.4874.2.2.49.1 | |||
| NjuniSubscrLocal | 1.3.6.1.4.1.4874.2.2.49.1.1 | |||
| TjuniSubscrLocalTable | 1.3.6.1.4.1.4874.2.2.49.1.1.1 | NA | ||
table · not-accessible · current Permits local configuration associating a remote subscriber's identity with a local interface, for use in circumstances where the remote subscriber's identity cannot be queried directly (e.g. dynamic IPoA operation). | ||||
| RjuniSubscrLocalEntry | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1 | NA | ||
row · not-accessible · current Local configuration associating a remote subscriber's identity with a local interface. | ||||
| CjuniSubscrLocalIfIndex | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the interface to which this subscriber information applies. | ||||
| CjuniSubscrLocalEncaps | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.2 | JuniSubscrEncaps | NA | |
column · JuniSubscrEncaps · not-accessible · current The incoming data encapsulation to which this subscriber information applies. An interface may have a unique subscriber identity configured for each incoming data encapsulation it supports. | ||||
| CjuniSubscrLocalControl | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current When set to clear(1), causes the subscriber information in this entry to be cleared. When set to ok(0), there is no effect and subscriber information is unchanged. When read, always returns a value of ok(0). No other object in this entry can be set simultaneously, otherwise an InconsistentValue error is reported.
| ||||
| CjuniSubscrLocalNamePrefix | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.4 | JuniEnable | RW | |
column · JuniEnable · read-write · current If enabled, indicates whether the value of juniSubscrLocalName is a prefix rather than a full name. | ||||
| CjuniSubscrLocalName | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current The subscriber's name. If juniSubscrLocalNamePrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber name. The full name is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber. | ||||
| CjuniSubscrLocalPasswordPrefix | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.6 | JuniEnable | RW | |
column · JuniEnable · read-write · current If enabled, indicates whether the value of juniSubscrLocalPassword prefix rather than a full password. | ||||
| CjuniSubscrLocalPassword | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.7 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current The subscriber's password. If juniSubscrLocalPasswordPrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber password. The full password is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber. | ||||
| CjuniSubscrLocalDomain | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.8 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current The subscriber's domain. | ||||
| CjuniSubscrLocalAuthentication | 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.9 | JuniEnable | RW | |
column · JuniEnable · read-write · current When enabled, the interface performs authentication with RADIUS server using the configured subscriber information and associated with the incoming data encapsulation (juniSubscriberLocalEncaps). | ||||
| NjuniSubscriberMIBConformance | 1.3.6.1.4.1.4874.2.2.49.4 | |||
| NjuniSubscriberMIBCompliances | 1.3.6.1.4.1.4874.2.2.49.4.1 | |||
| MjuniSubscriberCompliance | 1.3.6.1.4.1.4874.2.2.49.4.1.1 | obsolete | ||
compliance · obsolete Obsolete compliance statement for systems supporting subscriber operation. This statement became obsolete when local authentication support was added.
| ||||
| MjuniSubscriberCompliance2 | 1.3.6.1.4.1.4874.2.2.49.4.1.2 | |||
compliance · current The compliance statement for systems supporting subscriber operation.
| ||||
| NjuniSubscriberMIBGroups | 1.3.6.1.4.1.4874.2.2.49.4.2 | |||
| GjuniSubscriberLocalGroup | 1.3.6.1.4.1.4874.2.2.49.4.2.1 | obsolete | ||
group · obsolete Obsolete basic collection of objects providing management of locally-configured subscriber identities in a Juniper product. This group became obsolete when local authentication support was added. | ||||
| GjuniSubscriberLocalGroup2 | 1.3.6.1.4.1.4874.2.2.49.4.2.2 | |||
group · current The basic collection of objects providing management of locally-configured subscriber identities in a Juniper product. | ||||
Textual conventions
JuniSubscrEncapsINTEGERbridgedEthernet(19)ip(0)Encapsulated protocol type.