Juniper-SLEP-MIB
Juniper Networks/UnisphereThe Serial Line Encapulation Protocol (SLEP) MIB for the Juniper Networks enterprise.
snmptranslate -m Juniper-SLEP-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-SLEP-MIB <host> 1.3.6.1.4.1.4874.2.2.15Imports
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
|---|---|
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable, JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniSlepMIBS | 1.3.6.1.4.1.4874.2.2.15 | |||
identity The Serial Line Encapulation Protocol (SLEP) MIB for the Juniper Networks enterprise. | ||||
| NjuniSlepObjects | 1.3.6.1.4.1.4874.2.2.15.1 | |||
| NjuniSlepIfLayer | 1.3.6.1.4.1.4874.2.2.15.1.1 | |||
| SjuniSlepNextIfIndex | 1.3.6.1.4.1.4874.2.2.15.1.1.1 | JuniNextIfIndex | RO | |
scalar · JuniNextIfIndex · read-only · current Coordinate ifIndex value allocation for entries in juniSlepIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | ||||
| TjuniSlepIfTable | 1.3.6.1.4.1.4874.2.2.15.1.1.2 | NA | ||
table · not-accessible · current The parameters for the SLEP service on this interface. | ||||
| RjuniSlepIfEntry | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1 | NA | ||
row · not-accessible · current The Parameters for a particular SLEP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
| ||||
| CjuniSlepIfIndex | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex value of the corresponding ifEntry. | ||||
| CjuniSlepKeepAliveTimer | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.2 | INTEGER (0..6553) | RC | |
column · INTEGER (0..6553) · read-create · current The interface keep alive timer for this entry. The time in seconds that this entity will wait for sending a keep-alive-message to the remote SLEP entity, and the time in seconds that this entity will wait for the reception of a keep-alive-message from the remote SLEP entity.
| ||||
| CjuniSlepIfLowerIfIndex | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.3 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of an interface over which this SLEP interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation. | ||||
| CjuniSlepIfRowStatus | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniSlepIfRowStatus
juniSlepIfLowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for juniSlepIfIndex must have been determined previously, by
reading juniSlepNextIfIndex.
The interface identified by juniSlepIfLowerIfIndex must exist, and
must be an interface type that permits layering of SLEP Interface
above it.
A corresponding entry in ifTable/ifXTable/juniIfTable is created/
destroyed as a result of creating/destroying an entry in this table. | ||||
| CjuniSlepDownWhenLooped | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.5 | JuniEnable | RC | |
column · JuniEnable · read-create · current The down-when-looped control for this entry. This attribute determines if loop detection is enabled for the interface. If set to disable, loop detection is disabled for the interface. | ||||
| TjuniSlepIfStatisticsTable | 1.3.6.1.4.1.4874.2.2.15.1.1.3 | NA | ||
table · not-accessible · current The statistics for the SLEP service on this interface. | ||||
| RjuniSlepIfStatisticsEntry | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1 | NA | ||
row · not-accessible · current The statistics for a particular SLEP interface.
| ||||
| CjuniSlepIfStatsIndex | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex value of that identifies this entry. | ||||
| CjuniSlepKeepAliveFailures | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The number of link drops due to keep-alive failures. | ||||
| CjuniSlepLinkStatusTooLongPackets | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets that were too long for this SLEP entity. | ||||
| CjuniSlepLinkStatusBadFCSs | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of FCS's errors for this SLEP entity. | ||||
| NjuniSlepConformance | 1.3.6.1.4.1.4874.2.2.15.4 | |||
| NjuniSlepCompliances | 1.3.6.1.4.1.4874.2.2.15.4.1 | |||
| MjuniSlepCompliance | 1.3.6.1.4.1.4874.2.2.15.4.1.1 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper SLEP MIB. This compliance statement became obsolete when the juniSlepDownWhenLooped object was added.
| ||||
| MjuniSlepCompliance2 | 1.3.6.1.4.1.4874.2.2.15.4.1.2 | |||
compliance · current The compliance statement for entities which implement the Juniper SLEP MIB.
| ||||
| NjuniSlepGroups | 1.3.6.1.4.1.4874.2.2.15.4.2 | |||
| GjuniSlepGroup | 1.3.6.1.4.1.4874.2.2.15.4.2.1 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of SLEP interfaces in a Juniper product. This group became obsolete when the juniSlepDownWhenLooped object was added. | ||||
| GjuniSlepGroup2 | 1.3.6.1.4.1.4874.2.2.15.4.2.2 | |||
group · current A collection of objects providing management of SLEP interfaces in a Juniper product. | ||||