Juniper-REDUNDANCY-MIB
Juniper Networks/UnisphereThe redundancy configuration MIB for Juniper Networks enterprise.
snmptranslate -m Juniper-REDUNDANCY-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-REDUNDANCY-MIB <host> 1.3.6.1.4.1.4874.2.2.74Imports
| Juniper-MIBs | juniMibs |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysUpTime |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniRedundancyMIB | 1.3.6.1.4.1.4874.2.2.74 | |||
identity The redundancy configuration MIB for Juniper Networks enterprise. | ||||
| NjuniRedundancyNotifications | 1.3.6.1.4.1.4874.2.2.74.0 | |||
| !juniRedundancyColdSwitchoverNotification | 1.3.6.1.4.1.4874.2.2.74.0.1 | |||
notification · current This notification is generated in a dual SRP system when control transfers from one to SRP to the other in file system synchronization mode or when high availability is not operational. This notification is sent by the newly active SRP immediately following the switchover in which configuration is preserved but volatile state is lost. | ||||
| !juniRedundancyWarmSwitchoverNotification | 1.3.6.1.4.1.4874.2.2.74.0.2 | |||
notification · current This notification is generated in a dual SRP system when control transfers from one SRP to the other and high availability is operational. This notification is sent by the newly active SRP immediately following the switchover in which configuration and volatile state are preserved. | ||||
| !juniRedundancyStateEnabledNotification | 1.3.6.1.4.1.4874.2.2.74.0.3 | |||
notification · current A state change notification sent by active SRP whenever system enters 'active' state.
| ||||
| !juniRedundancyStateDisabledNotification | 1.3.6.1.4.1.4874.2.2.74.0.4 | |||
notification · current A state change notification sent by active SRP whenever system enters 'disabled' state.
| ||||
| !juniRedundancyStatePendingNotification | 1.3.6.1.4.1.4874.2.2.74.0.5 | |||
notification · current A state change notification sent by active SRP whenever system enters 'pending' state.
| ||||
| !juniRedundancyModeNotification | 1.3.6.1.4.1.4874.2.2.74.0.6 | |||
notification · current A mode change notification sent by active SRP whenever redundancy mode of the system is changed from 'fileSystemSynchronization' to 'highAvailability' and vice versa. | ||||
| !juniLcRedundancySwitchoverNotification | 1.3.6.1.4.1.4874.2.2.74.0.7 | |||
notification · current A mode change notification sent by active linecard whenever redundancy mode and vice versa. | ||||
| !juniLcRedundancyStateEnabledNotification | 1.3.6.1.4.1.4874.2.2.74.0.8 | |||
notification · current A state change notification sent by active linecard whenever system enters 'active' state. | ||||
| !juniLcRedundancyStateDisabledNotification | 1.3.6.1.4.1.4874.2.2.74.0.9 | |||
notification · current A state change notification sent by active linecard whenever system enters 'disabled' state. | ||||
| NjuniRedundancyObjects | 1.3.6.1.4.1.4874.2.2.74.1 | |||
| NjuniRedundancyStatus | 1.3.6.1.4.1.4874.2.2.74.1.1 | |||
| SjuniRedundancyActiveSlot | 1.3.6.1.4.1.4874.2.2.74.1.1.1 | Integer32 (0..255) | RO | |
scalar · Integer32 (0..255) · read-only · current A unique identifier for active SRP slot. | ||||
| SjuniRedundancyActiveSlotState | 1.3.6.1.4.1.4874.2.2.74.1.1.2 | JuniRedundancyState | RO | |
scalar · JuniRedundancyState · read-only · current The current state of redundancy on active SRP. | ||||
| SjuniRedundancyStandbySlot | 1.3.6.1.4.1.4874.2.2.74.1.1.3 | Integer32 (0..255) | RO | |
scalar · Integer32 (0..255) · read-only · current A unique identifier for standby SRP slot. | ||||
| SjuniRedundancyStandbySlotState | 1.3.6.1.4.1.4874.2.2.74.1.1.4 | JuniRedundancyState | RO | |
scalar · JuniRedundancyState · read-only · current The current state of redundancy on standby SRP. | ||||
| SjuniRedundancyLastResetReason | 1.3.6.1.4.1.4874.2.2.74.1.1.5 | JuniRedundancyResetReason | RO | |
scalar · JuniRedundancyResetReason · read-only · current The reason for the last SRP reset. | ||||
| SjuniRedundancyLastSystemActivationTime | 1.3.6.1.4.1.4874.2.2.74.1.1.6 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The value of sysUptime when the system is operational either following a reload or a switchover. The value 0 is a special value to indicate 'from reset'. | ||||
| SjuniRedundancyLastSystemActivationType | 1.3.6.1.4.1.4874.2.2.74.1.1.7 | JuniRedundancySystemActivationType | RO | |
scalar · JuniRedundancySystemActivationType · read-only · current The type of last SRP activation when the system became operational. | ||||
| SjuniRedundancyHaActiveTime | 1.3.6.1.4.1.4874.2.2.74.1.1.8 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The value of sysUptime when active SRP enters 'active' state as indicated in juniRedundancyActiveSlotState object. The value is 0 in file system synchronization redundancy mode. | ||||
| NjuniRedundancyCfg | 1.3.6.1.4.1.4874.2.2.74.1.2 | |||
| SjuniRedundancyNotifsEnabled | 1.3.6.1.4.1.4874.2.2.74.1.2.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Allows enabling and disabling of redundancy subsystem notifications. | ||||
| SjuniRedundancyCfgRedundancyMode | 1.3.6.1.4.1.4874.2.2.74.1.2.2 | JuniRedundancyMode | RW | |
scalar · JuniRedundancyMode · read-write · current Indicates the redundancy mode configured on the system. | ||||
| NjuniRedundancyHistory | 1.3.6.1.4.1.4874.2.2.74.1.3 | |||
| SjuniRedundancySystemActivationHistoryTableMaxLength | 1.3.6.1.4.1.4874.2.2.74.1.3.1 | Integer32 (0..50) | RW | |
scalar · Integer32 (0..50) · read-write · current Maximum number of entries allowed in juniRedundancySystemActivationHistoryTable. A value of 0 will result in no history being displayed in juniRedundancySystemActivationHistoryTable. | ||||
| SjuniRedundancySystemActivationHistoryCommand | 1.3.6.1.4.1.4874.2.2.74.1.3.2 | JuniRedundancyHistoryCommand | RW | |
scalar · JuniRedundancyHistoryCommand · read-write · current A control variable to perform certain operations on juniRedundancySystemActivationHistoryTable. | ||||
| TjuniRedundancySystemActivationHistoryTable | 1.3.6.1.4.1.4874.2.2.74.1.3.3 | NA | ||
table · not-accessible · current A table that tracks the history of all reloads and switchovers that have occurred since system is powered on. The maximum number of entries permissible in this table is defined by juniRedundancySystemActivationHistoryTableMaxLength. When the number of entries in the table reaches the maximum limit, the next entry would replace the oldest existing entry in the table. | ||||
| RjuniRedundancySystemActivationHistoryEntry | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1 | NA | ||
row · not-accessible · current The entries in this table contain the reload and switchover information. Each entry in the table is indexed by juniRedundancySystemActivationHistoryIndex. The index wraps around to 1 after reaching the maximum value. | ||||
| CjuniRedundancySystemActivationHistoryIndex | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An integer value for the purpose of indexing system activation history table. After reaching maximum value as indicated by juniRedundancySystemActivationHistoryTableMaxLength, it wraps around to 1. | ||||
| CjuniRedundancyHistoryResetType | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.2 | JuniRedundancyResetType | RO | |
column · JuniRedundancyResetType · read-only · current Indicates the nature of the reset - reload or switchover - and the slot types involved. Depending on the value of this object, certain elements of JuniRedundancySystemActivationHistoryEntry will not be applicable. | ||||
| CjuniRedundancyHistoryActivationType | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.3 | JuniRedundancySystemActivationType | RO | |
column · JuniRedundancySystemActivationType · read-only · current Indicates the activation type of the particular historical system activation entry with respect to the slot types involved. | ||||
| CjuniRedundancyHistoryPrevActiveSlot | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.4 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Indicates the slot number of active SRP or line card that went down. | ||||
| CjuniRedundancyHistoryPrevActiveRelease | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the system-wide boot release file name of the slot indicated by juniRedundancyHistoryPrevActiveSlot. | ||||
| CjuniRedundancyHistoryCurrActiveSlot | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.6 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Indicates the slot number of standby SRP or spare line card that took over. | ||||
| CjuniRedundancyHistoryCurrActiveRelease | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the system-wide boot release file name of the slot indicated by juniRedundancyHistoryCurrActiveSlot. | ||||
| CjuniRedundancyHistoryResetReason | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.8 | JuniRedundancyResetReason | RO | |
column · JuniRedundancyResetReason · read-only · current Indicates the reason for reload or switchover of the slots involved. | ||||
| CjuniRedundancyHistoryActivationTime | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.9 | DateAndTime | RO | |
column · DateAndTime · read-only · current Indicates the date and time when the reload or switchover of the slots occurred. | ||||
| SjuniRedundancyHistoryReloads | 1.3.6.1.4.1.4874.2.2.74.1.3.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Indicates the number of reloads since the system is powered on. | ||||
| SjuniRedundancyHistoryColdSwitchovers | 1.3.6.1.4.1.4874.2.2.74.1.3.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Indicates the number of cold switchovers since the system is powered on. | ||||
| SjuniRedundancyHistoryWarmSwitchovers | 1.3.6.1.4.1.4874.2.2.74.1.3.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Indicates the number of warm switchovers since the system is powered on. | ||||
| NjuniLcRedundancyStatus | 1.3.6.1.4.1.4874.2.2.74.1.4 | |||
| SjuniLcRedundancyActiveSlot | 1.3.6.1.4.1.4874.2.2.74.1.4.1 | Integer32 (0..255) | AN | |
scalar · Integer32 (0..255) · accessible-for-notify · current An identifier for primary linecard slot. | ||||
| SjuniLcRedundancyStandbySlot | 1.3.6.1.4.1.4874.2.2.74.1.4.2 | Integer32 (0..255) | AN | |
scalar · Integer32 (0..255) · accessible-for-notify · current A unique identifier for secondary linecard slot. | ||||
| SjuniLcRedundancyLastResetReason | 1.3.6.1.4.1.4874.2.2.74.1.4.3 | JuniLcRedundancyResetReason | AN | |
scalar · JuniLcRedundancyResetReason · accessible-for-notify · current The reason for the last linecard reset. | ||||
| SjuniLcRedundancyActivationType | 1.3.6.1.4.1.4874.2.2.74.1.4.4 | JuniLcRedundancySystemActivationType | AN | |
scalar · JuniLcRedundancySystemActivationType · accessible-for-notify · current The type of linecard activation when the system became operational. | ||||
| SjuniLcRedundancyHaActiveTime | 1.3.6.1.4.1.4874.2.2.74.1.4.5 | TimeTicks | AN | |
scalar · TimeTicks · accessible-for-notify · current The value of sysUptime when active linecard enters 'active' state as indicated in juniLcRedundancyActiveSlotState object. | ||||
| SjuniLcRedundancySwitchoverTime | 1.3.6.1.4.1.4874.2.2.74.1.4.6 | TimeTicks | AN | |
scalar · TimeTicks · accessible-for-notify · current The value of sysUptime when the system is operational either following a reload or a switchover. The value 0 is a special value to indicate 'from reset'. | ||||
| NjuniRedundancyMIBConformance | 1.3.6.1.4.1.4874.2.2.74.2 | |||
| NjuniRedundancyMIBCompliances | 1.3.6.1.4.1.4874.2.2.74.2.1 | |||
| MjuniRedundancyMIBCompliance | 1.3.6.1.4.1.4874.2.2.74.2.1.1 | |||
compliance · current The compliance statement for system redundancy support. | ||||
| NjuniRedundancyMIBGroups | 1.3.6.1.4.1.4874.2.2.74.2.2 | |||
| GjuniRedundancyStatusGroup | 1.3.6.1.4.1.4874.2.2.74.2.2.1 | |||
group · current The collection of redundancy status objects. | ||||
| GjuniRedundancyCfgGroup | 1.3.6.1.4.1.4874.2.2.74.2.2.2 | |||
group · current The collection of redundancy configuration objects. | ||||
| GjuniRedundancyHistoryGroup | 1.3.6.1.4.1.4874.2.2.74.2.2.3 | |||
group · current The collection of redundancy history objects.
| ||||
| GjuniRedundancyNotificationGroup | 1.3.6.1.4.1.4874.2.2.74.2.2.4 | |||
group · current The collection of notifications for redundancy events.
| ||||
Textual conventions
JuniLcRedundancyResetReasonINTEGERhardware(4)notKnown(2)poweron(1)software(5)userInitiated(3)Reason codes for the reset of active line card that might result in switch of control to standby line card. poweron - indicates 'power-on' situation. notKnown - Reason is unknown. userInitiated - A safe, manual reset was initiated by the user. hardware - reset was initiated due to hardware issue. software - reset was initiated due to software issue.JuniLcRedundancySystemActivationTypeINTEGERcoldSwitch(2)reload(1)warmSwitch(3)Various kinds of system activation: reload - line card has reloaded, i.e., no switchover has occurred. coldSwitch - line card switched over from active to standby linecard and no subscriber state is maintained warmSwitch - line card switched over from active to standby linecards; line cards were not reloaded during switchover.JuniRedundancyHistoryCommandINTEGERclear(2)keep(1)Identifies the command to be performed on the system activation history table. keep - Retain history in persistent storage. clear - Erase the current entries of juniRedundancySystemActivationHistoryTable.JuniRedundancyModeINTEGERfileSystemSynchronization(1)highAvailability(2)The mode of the redundancy subsystem: fileSystemSynchronization - SRP synchronization is based on file synchronization. highAvailability - SRP synchronization is based on high availability model that allows non-stop forwarding.JuniRedundancyResetReasonINTEGERnone(1)notKnown(2)userInitiated(3)Reason codes for the reset of active SRP or a line card that might result in switch of control to standby SRP or spare line card. none - No reset or switchover has occurred and indicates 'power-on' situation. notKnown - Reason is unknown. userInitiated - A safe, manual reset was initiated by the user.JuniRedundancyResetTypeINTEGERlinecardReload(4)linecardSwitchover(5)notKnown(1)srpReload(2)srpSwitchover(3)Identifies the nature of the reset and slot types involved since the system is powered on. notKnown - Reset type is unknown. srpReload - The reset involved reloading SRP slot(s). srpSwitchover - The reset involved switchover of SRP slot(s). linecardReload - The reset involved reloading the line card slot(s). linecardSwitchover - The reset involved line card redundancy.JuniRedundancyStateINTEGERactive(6)disabled(3)fileSystemSyncing(2)initializing(4)notKnown(1)pending(5)The current state of redundancy subsystem: notKnown - Redundancy state is unknown. fileSystemSyncing - Redundancy operation is based on file system synchronization. SRP switchover stops forwarding. disabled - Redundancy operation is based on high availability model but high availability is not yet operational. SRP switchover stops forwarding. initializing - Redundancy operation is based on high availability model and standby SRP is being bulk synchronized from active SRP. SRP switchover stops forwarding. pending - Redundancy operation is based on high availability model and bulk synchronization of standby SRP completed. SRP switchover stops forwarding. active - Redundancy operation is based on high availability model and high availability is fully operational. SRP switchover does not stop forwarding.JuniRedundancySystemActivationTypeINTEGERcoldSwitch(2)reload(1)warmSwitch(3)Various kinds of system activation: reload - System has reloaded, i.e., no switchover has occurred. coldSwitch - System switched over from active to standby SRP and the switchover involved reloading of line cards interrupting forwarding. warmSwitch - System switched over from active to standby SRP; line cards were not reloaded during switchover and forwarding was uninterrupted.
Traps / Notifications
- juniLcRedundancyStateDisabledNotification
1.3.6.1.4.1.4874.2.2.74.0.9 - juniLcRedundancyStateEnabledNotification
1.3.6.1.4.1.4874.2.2.74.0.8 - juniLcRedundancySwitchoverNotification
1.3.6.1.4.1.4874.2.2.74.0.7 - juniRedundancyColdSwitchoverNotification
1.3.6.1.4.1.4874.2.2.74.0.1 - juniRedundancyModeNotification
1.3.6.1.4.1.4874.2.2.74.0.6 - juniRedundancyStateDisabledNotification
1.3.6.1.4.1.4874.2.2.74.0.4 - juniRedundancyStateEnabledNotification
1.3.6.1.4.1.4874.2.2.74.0.3 - juniRedundancyStatePendingNotification
1.3.6.1.4.1.4874.2.2.74.0.5 - juniRedundancyWarmSwitchoverNotification
1.3.6.1.4.1.4874.2.2.74.0.2