Juniper-PIM-MIB
Juniper Networks/UnisphereThe enterprise MIB module for management of PIM routers.
snmptranslate -m Juniper-PIM-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-PIM-MIB <host> 1.3.6.1.4.1.4874.2.2.43Imports
| IF-MIB | InterfaceIndex |
|---|---|
| Juniper-MIBs | juniMibs |
| PIM-MIB | pimInterfaceIfIndex, pimRPSetAddress, pimRPSetComponent, pimRPSetGroupAddress, pimRPSetGroupMask |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniPimMIB | 1.3.6.1.4.1.4874.2.2.43 | |||
identity The enterprise MIB module for management of PIM routers. | ||||
| NjuniPimMIBObjects | 1.3.6.1.4.1.4874.2.2.43.1 | |||
| NjuniPimTraps | 1.3.6.1.4.1.4874.2.2.43.1.0 | |||
| NjuniPimGlobal | 1.3.6.1.4.1.4874.2.2.43.1.1 | |||
| SjuniPimNumHelloRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of Hellos received by PIM on this router. | ||||
| SjuniPimNumJoinPruneRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of JoinPrunes received by PIM on this router. | ||||
| SjuniPimNumAssertRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of Asserts received by PIM on this router. | ||||
| SjuniPimNumGraftRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of Grafts received by PIM on this router. | ||||
| SjuniPimNumGraftAckRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of Graft Acks received by PIM on this router. | ||||
| SjuniPimNumHelloSent | 1.3.6.1.4.1.4874.2.2.43.1.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of Hellos sent by PIM on this router. | ||||
| SjuniPimNumJoinPruneSent | 1.3.6.1.4.1.4874.2.2.43.1.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of JoinPrunes sent by PIM on this router. | ||||
| SjuniPimNumAssertSent | 1.3.6.1.4.1.4874.2.2.43.1.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of Asserts sent by PIM on this router. | ||||
| SjuniPimNumGraftSent | 1.3.6.1.4.1.4874.2.2.43.1.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of Grafts sent by PIM on this router. | ||||
| SjuniPimNumGraftAckSent | 1.3.6.1.4.1.4874.2.2.43.1.1.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of Graft Acks sent by PIM on this router. | ||||
| TjuniPimInterfaceTable | 1.3.6.1.4.1.4874.2.2.43.1.1.11 | NA | ||
table · not-accessible · current The (conceptual) table listing enterprise specific information on a subset of the rows of the pimInterfaceTable defined in the standard PIM MIB. | ||||
| RjuniPimInterfaceEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimInterfaceTable. There is one entry per entry in the pimInterfaceTable.
| ||||
| CjuniPimIntfNumHelloRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of Hellos received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumJoinPruneRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of JoinPrunes received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumAssertRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of Asserts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumGraftRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of Grafts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumGraftAckRcvd | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of Graft Acks received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumHelloSent | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of Hellos sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumJoinPruneSent | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of JoinPrunes sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumAssertSent | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of Asserts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumGraftSent | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of Grafts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfNumGraftAckSent | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Total number of Graft Acks sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0. | ||||
| CjuniPimIntfVersion | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.11 | INTEGER (1..2147483647) | RO | |
column · INTEGER (1..2147483647) · read-only · current The version of PIM running on this interface. | ||||
| CjuniPimIntfNumNbrs | 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Number of PIM neighbors detected on this interface. | ||||
| TjuniPimMRouteTable | 1.3.6.1.4.1.4874.2.2.43.1.1.12 | NA | ||
table · not-accessible · current The (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> states. | ||||
| RjuniPimMRouteEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimMRouteTable. | ||||
| CjuniPimMRouteGroup | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The group address. Specified as 224.0.0.0 for <*, *, RP> entries. | ||||
| CjuniPimMRouteSource | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries. | ||||
| CjuniPimMRouteSourceMask | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current The source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries. | ||||
| CjuniPimMRouteRPAddress | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.4 | IpAddress | NA | |
column · IpAddress · not-accessible · current The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries. | ||||
| CjuniPimMRouteUpstreamAssertTimer | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor. | ||||
| CjuniPimMRouteAssertMetric | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received. | ||||
| CjuniPimMRouteAssertPref | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect. | ||||
| CjuniPimMRouteAssertRPTBit | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect. | ||||
| CjuniPimMRouteBits | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.9 | Bits | RO | |
column · Bits · read-only · current This object describes whether the entry is on shared tree (RPT) or shortest path tree (SPT).
| ||||
| CjuniPimMRouteRPAddrInUse | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.10 | IpAddress | RO | |
column · IpAddress · read-only · current The RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries. Set to 0.0.0.0 for <S, G> entries on shortest path tree. | ||||
| CjuniPimMRouteUpstreamNbr | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.11 | IpAddress | RO | |
column · IpAddress · read-only · current The address of upstream neighbor being used for the entry. Its set to 0.0.0.0 if the router is directly attached to source on one of its interface. | ||||
| CjuniPimMRouteIifAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.12 | IpAddress | RO | |
column · IpAddress · read-only · current The address of incoming interface for this entry. | ||||
| CjuniPimMRouteIsWaitingToSwitchToSPT | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current This object describes whether the entry is still waiting to switch completely to shortest path tree in case of <S, G> entries. It waits to do this till it receives first packet from incoming interface towards shortest path tree. | ||||
| CjuniPimMRouteEntryExpiryTimer | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.14 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time after which the entry timer expires for this entry. Set to 0 if entry timer is not active. | ||||
| CjuniPimMRouteSenderDRAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.15 | IpAddress | RO | |
column · IpAddress · read-only · current The address of the designated router on the sender's subnet in case of <S, G> entries. The sender designated router register encapsulates data to RP. Set to 0.0.0.0 for <*, G> and <*, *, RP> entries. | ||||
| CjuniPimMRouteRouteAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.16 | IpAddress | RO | |
column · IpAddress · read-only · current The address of the route being used to do RPF check for this entry. It is set to 0.0.0.0 (with juniPimMRouteRouteMask set to 255.255.255.255) if there is no route available. | ||||
| CjuniPimMRouteRouteMask | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.17 | IpAddress | RO | |
column · IpAddress · read-only · current The mask of the route being used to do RPF check for this entry. It is set to 255.255.255.255 (with juniPimMRouteRoute set to 0.0.0.0) if there is no route available. | ||||
| CjuniPimMRouteGRPAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.18 | IpAddress | RO | |
column · IpAddress · read-only · current The address of the group-to-RP mapping being used to get the RP for this entry. It is set to 0.0.0.0 (with juniPimMRouteGRPMask set to 0.0.0.0) if there is no group-to-RP mapping available or if entry is <*, *, RP>. | ||||
| CjuniPimMRouteGRPMask | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.19 | IpAddress | RO | |
column · IpAddress · read-only · current The mask of the group-to-RP mapping being used to get the RP for this entry. It is set to 255.255.255.255 (with juniPimMRouteGRPAddr set to 0.0.0.0) if there is no group-to-RP mapping available or if entry is <*, *, RP>. | ||||
| CjuniPimMRouteOtherProtoOifJoinTypeAll | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.20 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving all data. This will be particularly true for dense mode protocols which would want all data (<*, *>) from PIM sparse mode protocol. | ||||
| CjuniPimMRouteOtherProtoOifJoinTypeG | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.21 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a given group. This will be particularly true for IGMP which would want data for a given group (<*, G>) from PIM protocol. | ||||
| CjuniPimMRouteOtherProtoOifJoinTypeSG | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.22 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a given <source, group>. This will be particularly true for IGMPv3 which would want data for a given <source, group (<S, G>) from PIM sparse-mode protocol. | ||||
| CjuniPimMRoutePimType | 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.23 | JuniPimType | RO | |
column · JuniPimType · read-only · current This object indicates if the owner of this entry is Sparse mode or Dense mode PIM. Owner is usually determined by the protocol running on the incoming interface of the entry. In case sparse-dense mode PIM is running on the incoming interface, sparse-mode is the owner if RP for the group is known, else dense mode is the owner. | ||||
| TjuniPimMRouteNextHopTable | 1.3.6.1.4.1.4874.2.2.43.1.1.13 | NA | ||
table · not-accessible · current The (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces. | ||||
| RjuniPimMRouteNextHopEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimMRouteNextHopTable. | ||||
| CjuniPimMRouteNextHopGroupAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The group address. Specified as 224.0.0.0 for <*, *, RP> entries. | ||||
| CjuniPimMRouteNextHopSrcAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries. | ||||
| CjuniPimMRouteNextHopSrcMask | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.4 | IpAddress | NA | |
column · IpAddress · not-accessible · current The source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries. | ||||
| CjuniPimMRouteNextHopRPAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.5 | IpAddress | NA | |
column · IpAddress · not-accessible · current The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries. | ||||
| CjuniPimMRouteNextHopIfId | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.6 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The interface index of the outgoing interface (next hop). Specified as 0 for register outgoing interface. Register outgoing interfaces are created by DR on the source subnet to send PIM register encapsulated data (as unicast) to RP. It is also used by PIM boundary routers (PMBRs) to register data to RP. | ||||
| CjuniPimMRouteNextHopAddress | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.7 | IpAddress | NA | |
column · IpAddress · not-accessible · current This object takes following different values based on the type of next hop. It should be set to the address of RP in case the next hop interface is register interface i.e. juniPimMRouteNextHopIfId object is set to 0. It should be set to the address of neighbor in case the interface is an NBMA interface. In all other cases it should be set to the group address itself. | ||||
| CjuniPimMRouteNextHopPruneReason | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing.
| ||||
| CjuniPimMRouteNextHopJoinTypeSSRP | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether or not the interface was added as a result of receiving <*, *, RP> join in case of <*, *, RP> entry OR inherited as outgoing interface from corresponding <*, *, RP> entry in case of <*, G> entry. | ||||
| CjuniPimMRouteNextHopJoinTypeG | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether or not the interface was added as a result of receiving <*, G> join in case of <*, G> entry OR inherited as outgoing interface from corresponding <*, G> entry in case of <S, G> entry. | ||||
| CjuniPimMRouteNextHopJoinTypeSG | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.11 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether or not the interface was added as a result of receiving <S, G> join in case of <S, G> entry. | ||||
| CjuniPimMRouteNextHopHasLGM | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.12 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether or not the interface has local group membership (as indicated by IGMP) in case of <*, G> and <S, G> entries. | ||||
| CjuniPimMRouteNextHopHasOifAW | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether or not this interface is the winner of assert for corresponding <*, G>/<S, G> entry. | ||||
| CjuniPimMRouteNextHopHasOifSendAssert | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.14 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether or not this interface is going to send an assert at the end of assert suppression interval. Assert suppression is used to prevent a flood of assert to be generated in response to data or other asserts. | ||||
| CjuniPimMRouteNextHopHasOifRegister | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.15 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether or not this next hop is a register outgoing interface. | ||||
| CjuniPimMRouteNextHopHasOifBorderBit | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.16 | TruthValue | RO | |
column · TruthValue · read-only · current This object is used to describe a register outgoing interface. It indicates whether or not the border bit is set in the register packet when the packet is sent over the register interface. For all other (non-register) interfaces its set to false. | ||||
| CjuniPimMRouteNextHopHasOifNullEncapsBit | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.17 | TruthValue | RO | |
column · TruthValue · read-only · current This object is used to describe a register outgoing interface. It indicates whether or not the NULL encapsulation bit is set (periodically) in the register packet when the packet is sent over the register interface. For all other (non-register) interfaces its set to false. | ||||
| CjuniPimMRouteNextHopJoinEndTimer | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.18 | TimeTicks | RO | |
column · TimeTicks · read-only · current This object indicates the time (in seconds) left when the join timer expires for the outgoing interface. Join timer for an outgoing interface of <S, G> entry indicates when the <S, G> join expires, for a <*, G> entry indicates when the <*, G> join expires and for a <*, *, RP> entry indicates when the <*, *, RP> join expires. Inherited joins (like <S, G> inheriting from <*, G> AND <*, G> inheriting from <*, *, RP>) expire when the corresponding parent join expires. | ||||
| CjuniPimMRouteNextHopAssertEndTimer | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.19 | TimeTicks | RO | |
column · TimeTicks · read-only · current This object indicates the time (in seconds) left when the assert timer expires on this outgoing inteface. | ||||
| CjuniPimMRouteNextHopNextAssertTimer | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.20 | TimeTicks | RO | |
column · TimeTicks · read-only · current This object indicates the duration (in seconds) left for which sending an assert has been suppressed on this outgoing interface. | ||||
| CjuniPimMRouteNextHopAssertSrcAddress | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.21 | IpAddress | RO | |
column · IpAddress · read-only · current This object indicates the source address which will be used in the assert packet to send an assert out for the entry on this outgoing interface. For <S, G> entries it is the address of the source S itself. For <*, G> entries it is the address of the source whose data was forwarded using this <*, G> and caused the assert situation to happen. | ||||
| CjuniPimMRouteNextHopRegisterSuppressionTimer | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.22 | TimeTicks | RO | |
column · TimeTicks · read-only · current This object is used for register outgoing interfaces. It indicates the duration (in seconds) left for which sending a register packet has been suppressed on the register outgoing interface as a result of receiving register-stop from the RP. | ||||
| CjuniPimMRouteNextHopPimType | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.23 | JuniPimType | RO | |
column · JuniPimType · read-only · current This object indicates whether the outgoing interface was contributed by sparse-mode or dense-mode PIM. | ||||
| CjuniPimMRouteNextHopPruneTimeLeft | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.24 | TimeTicks | RO | |
column · TimeTicks · read-only · current This object indicates the time (in seconds) left when the prune timer expires on an outgoing inteface. Its used for pruned outgoing interfaces contributed by dense-mode PIM. | ||||
| CjuniPimMRouteNextHopsendingIpAddress | 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.25 | IpAddress | RO | |
column · IpAddress · read-only · current This object describes the source IP address used by this interface to send PIM packets out on this outgoing interface. | ||||
| TjuniPimRPSetTable | 1.3.6.1.4.1.4874.2.2.43.1.1.14 | NA | ||
table · not-accessible · current The (conceptual) table listing enterprise specific information on a subset of the rows of the pimRPSetTable defined in the standard PIM MIB. | ||||
| RjuniPimRPSetEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.14.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimRPSetTable. | ||||
| CjuniPimRPSetPriority | 1.3.6.1.4.1.4874.2.2.43.1.1.14.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current This object describes the priority of the RP for this group-to-RP mapping. | ||||
| CjuniPimRPSetTypeInfo | 1.3.6.1.4.1.4874.2.2.43.1.1.14.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object describes the mechanism by which this group to RP mapping has been learnt, i.e. whether its statically configured, AutoRP learnt or BSR learnt. It also indicates whether the mapping is positive or negative. Negative mappings force the groups in that range to fall into dense-mode category if sparse-dense mode is configured or no RP if its purely sparse mode configuration.
| ||||
| CjuniPimRPSetAccessListName | 1.3.6.1.4.1.4874.2.2.43.1.1.14.1.3 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current This object lists the name of the access list from which this group-to-RP mapping was picked up in case of statically configured RPs. | ||||
| TjuniPimStaticRPConfTable | 1.3.6.1.4.1.4874.2.2.43.1.1.15 | NA | ||
table · not-accessible · current The (conceptual) table listing statically configured PIM RPs. | ||||
| RjuniPimStaticRPConfEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.15.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimStaticRPConfTable. | ||||
| CjuniPimStaticRPConfComponentIndex | 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. | ||||
| CjuniPimStaticRPConfRPAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current Ip address of the RP which for the group-to-RP mapping being configured. | ||||
| CjuniPimStaticRPConfAccessListName | 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.3 | OCTET STRING (SIZE (0..32)) | NA | |
column · OCTET STRING (SIZE (0..32)) · not-accessible · current Name of the access list from which group-ranges are picked up for this group-ro-RP mapping. Every deny component in the list is added as negative group-ro-RP mapping. | ||||
| CjuniPimStaticRPConfRowStatus | 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row, by which new entries may be created, or old entries deleted from this table. | ||||
| CjuniPimStaticRPConfOverride | 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not this statically configured group-to-RP mapping should override the group-to-RP mapping learnt via AutoRP for the component group-ranges in the access list. By default AutoRP learnt group-to-RP mappings are preferred over statically configured ones. While setting the rowStatus to create a static RP, this field should be assigned to true if the override property is desired. | ||||
| TjuniPimAutoRPConfTable | 1.3.6.1.4.1.4874.2.2.43.1.1.16 | NA | ||
table · not-accessible · current The (conceptual) table allowing AutoRP configuration of candidate RPs (advertisement agents). | ||||
| RjuniPimAutoRPConfEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.16.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimAutoRPConfTable. | ||||
| CjuniPimAutoRPConfComponentIndex | 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. | ||||
| CjuniPimAutoRPConfCandRPAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the candidate RP for this advertising agent configuration. | ||||
| CjuniPimAutoRPConfGroupAccessListName | 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.3 | OCTET STRING (SIZE (0..32)) | NA | |
column · OCTET STRING (SIZE (0..32)) · not-accessible · current The access list name from which group ranges are picked up for advertising agent configuration. | ||||
| CjuniPimAutoRPConfRowStatus | 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row, by which new entries may be created, or old entries deleted from this table. | ||||
| CjuniPimAutoRPConfTTL | 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.5 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The time-to-live value used while sending AutoRP advertisement out for this group-to-RP mappings created as a result of this configuration. This should be set along with juniPimAutoRPConfRowStatus while creating an AutoRP advertising agent to denote the TTL value to be used. | ||||
| CjuniPimAutoRPConfAncmntIntvl | 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.6 | TimeTicks | RC | |
column · TimeTicks · read-create · current The time interval at which AutoRP advertisements are sent out for the group-to-RP mappings created as a result of this configuration. This should be set along with juniPimAutoRPConfRowStatus while creating an AutoRP advertising agent to denote the announcement interval to be used. | ||||
| CjuniPimAutoRPConfifId | 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.7 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The interface index of the interface for the candidate RP if an interface with that address exists else it is set to 0. | ||||
| TjuniPimAutoRPCandTable | 1.3.6.1.4.1.4874.2.2.43.1.1.17 | NA | ||
table · not-accessible · current The (conceptual) table listing AutoRP candidate RPS (advertising agents). | ||||
| RjuniPimAutoRPCandEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimAutoRPCandTable. | ||||
| CjuniPimAutoRPCandComponentIndex | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. | ||||
| CjuniPimAutoRPCandRPAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the candidate RP for this group-to-RP mapping. | ||||
| CjuniPimAutoRPCandGroupAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current The group address of the candidate RP for this group-to-RP mapping. | ||||
| CjuniPimAutoRPCandGroupMask | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.4 | IpAddress | NA | |
column · IpAddress · not-accessible · current The group mask of the candidate RP for this group-to-RP mapping. | ||||
| CjuniPimAutoRPCandRowStatus | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.5 | RowStatus | RO | |
column · RowStatus · read-only · current The current status of this row. | ||||
| CjuniPimAutoRPCandAccessListName | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.6 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The name of the group list using which this AutoRP group-to-RP candidate RP mapping was configured. | ||||
| CjuniPimAutoRPCandAutoRPTTL | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.7 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The time-to-live value used while sending AutoRP advertisement out for this group-to-RP mapping. | ||||
| CjuniPimAutoRPCandAutoRPAncmntIntvl | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.8 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time interval at which AutoRP advertisements are sent out for this group-to-RP mapping. | ||||
| CjuniPimAutoRPCandIfId | 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.9 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The interface index of the interface for this AutoRP group-to-RP candidate RP mapping if an interface for RP address exists else it is set to 0. | ||||
| TjuniPimComponentTable | 1.3.6.1.4.1.4874.2.2.43.1.1.18 | NA | ||
table · not-accessible · current The (conceptual) table listing each component (domain) in PIM. | ||||
| RjuniPimComponentEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimComponentTable. | ||||
| CjuniPimComponentIndex | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. | ||||
| CjuniPimComponentAutoRPMappingAgentRowStatus | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of AutoRP mapping agent by which this router can be made an AutoRP mapping agent or removed from being an AutoRP mapping agent in this component. | ||||
| CjuniPimComponentConfiguredAutoRPMappingAgentIfId | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.3 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current The interface index of the interface which mapping agent should use to send AutoRP mapping messages. If not specified, the interface with highest IP address in this domain is picked up for this purpose. | ||||
| CjuniPimComponentAutoRPMappingAgentInterval | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.4 | TimeTicks | RC | |
column · TimeTicks · read-create · current The time interval at which AutoRP mapping messages are sent out in this component. The default value is 60 seconds. | ||||
| CjuniPimComponentAutoRPMappingTTL | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.5 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The time-to-live value used while sending AutoRP mapping messages out in this component. | ||||
| CjuniPimComponentAutoRPMappingAgentIntfAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the interface which mapping agent is using to send AutoRP mapping messages. | ||||
| CjuniPimComponentAutoRPMappingAgentWinnerAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.7 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the winner AutoRP mapping agent. There can be multiple mapping agents configured in a given PIM domain(component). The mapping agent with highest IP address is chosen as the winner and it continues to send AutoRP mapping messages. If the router itself is the winner, then this is set to 0.0.0.0. | ||||
| CjuniPimComponentAutoRPMappingAgentWinnerLastHeard | 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.8 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time (in seconds) that has past since an AutoRP mapping message was receieved from the winner AutoRP mapping agent. If the router itself is the winner, then this is set to 0. | ||||
| TjuniPimUnicastRouteTable | 1.3.6.1.4.1.4874.2.2.43.1.1.19 | NA | ||
table · not-accessible · current The (conceptual) table listing all the unicast routes currently in use by PIM for diong RPF checking. | ||||
| RjuniPimUnicastRouteEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimUnicastRouteTable. | ||||
| CjuniPimUnicastRouteEntryAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The address of route in use. | ||||
| CjuniPimUnicastRouteEntryMask | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The mask of route in use. | ||||
| CjuniPimUnicastRouteEntryRpfNbr | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The RPF neighbor (next-hop) to reach the route of this entry. It is set to 0.0.0.0 for directly connected routes. | ||||
| CjuniPimUnicastRouteEntryIifId | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.4 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The interface index (next-hop) to reach the route of this entry. | ||||
| CjuniPimUnicastRouteEntryIifAddr | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The interface address (next-hop) to reach the route of this entry. | ||||
| CjuniPimUnicastRouteEntryPref | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The preference of the route of this entry. | ||||
| CjuniPimUnicastRouteEntryMetric | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The metric of the route of this entry. | ||||
| CjuniPimUnicastRouteEntryPimType | 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.8 | JuniPimType | RO | |
column · JuniPimType · read-only · current This object indicates whether the route specified in this entry is being used by sparse-mode and/or dense-mode PIM. | ||||
| TjuniPimSPTThresholdTable | 1.3.6.1.4.1.4874.2.2.43.1.1.20 | NA | ||
table · not-accessible · current The (conceptual) table listing threshold values set for switching from shared tree to shortest path tree and vice versa for data forwarded by PIM sparse-mode. | ||||
| RjuniPimSPTThresholdEntry | 1.3.6.1.4.1.4874.2.2.43.1.1.20.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the juniPimSPTThresholdTable. | ||||
| CjuniPimSPTThresholdAccessListName | 1.3.6.1.4.1.4874.2.2.43.1.1.20.1.1 | OCTET STRING (SIZE (0..32)) | NA | |
column · OCTET STRING (SIZE (0..32)) · not-accessible · current The name of the access list from which group ranges are picked up for setting SPT threshold in this entry. | ||||
| CjuniPimSPTThresholdRowStatus | 1.3.6.1.4.1.4874.2.2.43.1.1.20.1.2 | RowStatus | RW | |
column · RowStatus · read-write · current The status of this row, by which new entries may be created, or old entries deleted from this table. | ||||
| CjuniPimSPTThresholdKbps | 1.3.6.1.4.1.4874.2.2.43.1.1.20.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The value of SPT threshold in kilobits per second. Default value is 0. | ||||
| NjuniPimConformance | 1.3.6.1.4.1.4874.2.2.43.2 | |||
| NjuniPimCompliances | 1.3.6.1.4.1.4874.2.2.43.2.1 | |||
| MjuniPimCompliance | 1.3.6.1.4.1.4874.2.2.43.2.1.1 | |||
compliance · current The compliance statement for entities which implement the Juniper PIM MIB. | ||||
| NjuniPimGroups | 1.3.6.1.4.1.4874.2.2.43.2.2 | |||
| GjuniPimGeneralGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.1 | |||
group · current A collection of objects for managing general PIM capabilities in a Juniper product. | ||||
| GjuniPimInterfaceGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.2 | |||
group · current A collection of objects for managing PIM interface capabilities in a Juniper product.
| ||||
| GjuniPimMRouteConfGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.3 | |||
group · current A collection of objects for managing PIM multicast route capabilities in a Juniper product.
| ||||
| GjuniPimMRouteNextHopGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.4 | |||
group · current A collection of objects for managing PIM multicast route next hop capabilities in a Juniper product.
| ||||
| GjuniPimRPSetGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.5 | |||
group · current A collection of objects for managing PIM RP-Set capabilities in a Juniper product. | ||||
| GjuniPimStaticRPConfGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.6 | |||
group · current A collection of objects for managing statically configured PIM RPs capabilities in a Juniper product. | ||||
| GjuniPimAutoRPConfGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.7 | |||
group · current A collection of objects for managing PIM AutoRP candidate advertisment agent RP capabilities in a Juniper product. | ||||
| GjuniPimAutoRPCandGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.8 | |||
group · current A collection of objects for managing PIM AutoRP candidate advertising agent RP capabilities in a Juniper product. | ||||
| GjuniPimComponentGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.9 | |||
group · current A collection of objects for managing PIM component (domain) capabilities in a Juniper product.
| ||||
| GjuniPimUnicastRouteGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.10 | |||
group · current A collection of objects for managing PIM unicast route capabilities in a Juniper product. | ||||
| GjuniPimSPTThresholdGroup | 1.3.6.1.4.1.4874.2.2.43.2.2.11 | |||
group · current A collection of objects for managing PIM shortest path tree threshold capabilities in a Juniper product. | ||||
Textual conventions
JuniPimTypeINTEGERdense(1)invalid(0)sparse(2)sparseAndDense(3)This data type is used do identify Sparse mode and Dense mode PIM protocol.