Juniper-OSPF-MIB
Juniper Networks/UnisphereThe OSPF Protocol MIB for the Juniper Networks enterprise.
snmptranslate -m Juniper-OSPF-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-OSPF-MIB <host> 1.3.6.1.4.1.4874.2.2.14Imports
| IF-MIB | InterfaceIndexOrZero |
|---|---|
| Juniper-MIBs | juniMibs |
| OSPF-MIB | ospfAddressLessIf, ospfAreaEntry, ospfIfEntry, ospfIfIpAddress, ospfNbrEntry, ospfVirtIfEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniOspfMIB | 1.3.6.1.4.1.4874.2.2.14 | |||
identity The OSPF Protocol MIB for the Juniper Networks enterprise. | ||||
| NjuniOspfObjects | 1.3.6.1.4.1.4874.2.2.14.1 | |||
| NjuniOspfGeneralGroup | 1.3.6.1.4.1.4874.2.2.14.1.1 | |||
| SjuniOspfProcessId | 1.3.6.1.4.1.4874.2.2.14.1.1.1 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current An identifier having special semantics when set. When this object's value is zero, OSPF is disabled and cannot be configured. Setting this object to a nonzero value enables OSPF operation and permits further OSPF configuration to be performed. Once set to a nonzero value, this object cannot be modified. | ||||
| SjuniOspfMaxPathSplits | 1.3.6.1.4.1.4874.2.2.14.1.1.2 | Integer32 (1..16) | RW | |
scalar · Integer32 (1..16) · read-write · current The maximum number of equal-cost routes that will be maintained by the OSPF protocol. A change in this value will be taken into account at the next shortest-path-first recalculation. | ||||
| SjuniOspfSpfHoldInterval | 1.3.6.1.4.1.4874.2.2.14.1.1.3 | Integer32 (1..5) | RW | |
scalar · Integer32 (1..5) · read-write · current The minimum amount of time that must elapse between shortest-path-first recalculations. Reducing this value can cause an immediate SPF recalulation if the new value is less than the current value of juniOspfSpfHoldTimeRemaining and other SPF-inducing protocol events have occurred.
| ||||
| SjuniOspfNumActiveAreas | 1.3.6.1.4.1.4874.2.2.14.1.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of active areas. | ||||
| SjuniOspfSpfTime | 1.3.6.1.4.1.4874.2.2.14.1.1.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The SPF schedule delay. | ||||
| SjuniOspfRefBw | 1.3.6.1.4.1.4874.2.2.14.1.1.6 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current The reference bandwith, in bits per second. This object is used when OSPF automatic interface cost calculation is used.
| ||||
| SjuniOspfAutoVlink | 1.3.6.1.4.1.4874.2.2.14.1.1.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Set this object to true(1) in order to have virtual links automatically configured. | ||||
| SjuniOspfIntraDistance | 1.3.6.1.4.1.4874.2.2.14.1.1.8 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Default distance for intra-area routes. | ||||
| SjuniOspfInterDistance | 1.3.6.1.4.1.4874.2.2.14.1.1.9 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Default distance for inter-area routes. | ||||
| SjuniOspfExtDistance | 1.3.6.1.4.1.4874.2.2.14.1.1.10 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Default distance for external type 5 and type 7 routes. | ||||
| SjuniOspfHelloPktsRcv | 1.3.6.1.4.1.4874.2.2.14.1.1.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of hello packets received. | ||||
| SjuniOspfDDPktsRcv | 1.3.6.1.4.1.4874.2.2.14.1.1.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of database description packets received. | ||||
| SjuniOspfLsrPktsRcv | 1.3.6.1.4.1.4874.2.2.14.1.1.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of link state request packets received. | ||||
| SjuniOspfLsuPktsRcv | 1.3.6.1.4.1.4874.2.2.14.1.1.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of link state update packets received. | ||||
| SjuniOspfLsAckPktsRcv | 1.3.6.1.4.1.4874.2.2.14.1.1.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of link state ACK packets received. | ||||
| SjuniOspfTotalRcv | 1.3.6.1.4.1.4874.2.2.14.1.1.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of OSPF packets received. | ||||
| SjuniOspfLsaDiscardCnt | 1.3.6.1.4.1.4874.2.2.14.1.1.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of LSA packets discarded. | ||||
| SjuniOspfHelloPktsSent | 1.3.6.1.4.1.4874.2.2.14.1.1.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of hello packets sent. | ||||
| SjuniOspfDDPktsSent | 1.3.6.1.4.1.4874.2.2.14.1.1.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of database description packets sent. | ||||
| SjuniOspfLsrPktsSent | 1.3.6.1.4.1.4874.2.2.14.1.1.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of link state request packets sent. | ||||
| SjuniOspfLsuPktsSent | 1.3.6.1.4.1.4874.2.2.14.1.1.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of link state update packets sent. | ||||
| SjuniOspfLsAckPktsSent | 1.3.6.1.4.1.4874.2.2.14.1.1.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of link state ACK packets sent. | ||||
| SjuniOspfErrPktsSent | 1.3.6.1.4.1.4874.2.2.14.1.1.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of packets dropped. | ||||
| SjuniOspfTotalSent | 1.3.6.1.4.1.4874.2.2.14.1.1.24 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of OSPF packets sent. | ||||
| SjuniOspfCsumErrPkts | 1.3.6.1.4.1.4874.2.2.14.1.1.25 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of packets received with a checksum error. | ||||
| SjuniOspfAllocFailNbr | 1.3.6.1.4.1.4874.2.2.14.1.1.26 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of neighbor allocation failures. | ||||
| SjuniOspfAllocFailLsa | 1.3.6.1.4.1.4874.2.2.14.1.1.27 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of LSA allocation failures. | ||||
| SjuniOspfAllocFailLsd | 1.3.6.1.4.1.4874.2.2.14.1.1.28 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of LSA HDR allocation failures. | ||||
| SjuniOspfAllocFailDbRequest | 1.3.6.1.4.1.4874.2.2.14.1.1.29 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of database request allocation failures. | ||||
| SjuniOspfAllocFailRtx | 1.3.6.1.4.1.4874.2.2.14.1.1.30 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of RTX allocation failures. | ||||
| SjuniOspfAllocFailAck | 1.3.6.1.4.1.4874.2.2.14.1.1.31 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of LS ACK allocation failures. | ||||
| SjuniOspfAllocFailDbPkt | 1.3.6.1.4.1.4874.2.2.14.1.1.32 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of DD packet allocation failures. | ||||
| SjuniOspfAllocFailCirc | 1.3.6.1.4.1.4874.2.2.14.1.1.33 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of OSPF interface allocation failures. | ||||
| SjuniOspfAllocFailPkt | 1.3.6.1.4.1.4874.2.2.14.1.1.34 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of OSPF general packet allocation failures. | ||||
| SjuniOspfOperState | 1.3.6.1.4.1.4874.2.2.14.1.1.35 | TruthValue | RO | |
scalar · TruthValue · read-only · current A flag to note whether this router is operational. | ||||
| SjuniOspfVpnRouteTag | 1.3.6.1.4.1.4874.2.2.14.1.1.36 | Unsigned32 (0..4294967295) | RW | |
scalar · Unsigned32 (0..4294967295) · read-write · current VPN route tag value. | ||||
| SjuniOspfDomainId | 1.3.6.1.4.1.4874.2.2.14.1.1.37 | Unsigned32 (0..4294967295) | RW | |
scalar · Unsigned32 (0..4294967295) · read-write · current OSPF domain ID. | ||||
| SjuniOspfMplsTeRtrIdIfIndex | 1.3.6.1.4.1.4874.2.2.14.1.1.38 | InterfaceIndexOrZero | RW | |
scalar · InterfaceIndexOrZero · read-write · current Configure the stable router interface id to designate it as TE capable. | ||||
| TjuniOspfAreaTable | 1.3.6.1.4.1.4874.2.2.14.1.2 | NA | ||
table · not-accessible · current The Juniper OSPF area table describes the OSPF-specific characteristics of areas. | ||||
| RjuniOspfAreaEntry | 1.3.6.1.4.1.4874.2.2.14.1.2.1 | NA | ||
row · not-accessible · current The OSPF area entry describes OSPF-specific characteristics of one area.
| ||||
| CjuniOspfAreaType | 1.3.6.1.4.1.4874.2.2.14.1.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The type of this area.
| ||||
| CjuniOspfAreaTeCapable | 1.3.6.1.4.1.4874.2.2.14.1.2.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Configure the specified area TE capable to flood the TE information. | ||||
| TjuniOspfIfTable | 1.3.6.1.4.1.4874.2.2.14.1.7 | NA | ||
table · not-accessible · current The Juniper OSPF interface table describes the OSPF-specific characteristics of interfaces. | ||||
| RjuniOspfIfEntry | 1.3.6.1.4.1.4874.2.2.14.1.7.1 | NA | ||
row · not-accessible · current The OSPF interface entry describes OSPF-specific characteristics of one interface.
| ||||
| CjuniOspfIfCost | 1.3.6.1.4.1.4874.2.2.14.1.7.1.1 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The cost value for this interface. | ||||
| CjuniOspfIfMask | 1.3.6.1.4.1.4874.2.2.14.1.7.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The mask used to derive the network range of this interface. | ||||
| CjuniOspfIfPassiveFlag | 1.3.6.1.4.1.4874.2.2.14.1.7.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Flag to indicate whether routing updates should be suppressed on this interface. To actively perform routing updates, set this object to disabled(0).
| ||||
| CjuniOspfIfNbrCount | 1.3.6.1.4.1.4874.2.2.14.1.7.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Number of OSPF neighbors from this interface. | ||||
| CjuniOspfIfAdjNbrCount | 1.3.6.1.4.1.4874.2.2.14.1.7.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Number of OSPF adjacent neighbors from this interface. | ||||
| CjuniOspfIfMd5AuthKey | 1.3.6.1.4.1.4874.2.2.14.1.7.1.6 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current The MD5 authentication key. When setting this object, the juniOspfIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use ospfIfAuthKey. Setting this object will have the side effect of adding or updating the correspondent entry in juniOspfMd5IntfKeyTable. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero. | ||||
| CjuniOspfIfMd5AuthKeyId | 1.3.6.1.4.1.4874.2.2.14.1.7.1.7 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current The MD5 authentication key ID. When setting this object, juniOspfIfMd5AuthKey must be specified on the same PDU. | ||||
| TjuniOspfIfBFDTable | 1.3.6.1.4.1.4874.2.2.14.1.8 | NA | ||
table · not-accessible · current The Juniper OSPF interface table describes the BFD-specific characteristics of interfaces. | ||||
| RjuniOspfIfBFDEntry | 1.3.6.1.4.1.4874.2.2.14.1.8.1 | NA | ||
row · not-accessible · current The Juniper OSPF interface table describes the BFD-specific characteristics of one interface.
| ||||
| CjuniOspfIfBfdEnable | 1.3.6.1.4.1.4874.2.2.14.1.8.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current This variable indicates whether BFD session on the interface is active or not | ||||
| CjuniOspfIfBfdMinRxInterval | 1.3.6.1.4.1.4874.2.2.14.1.8.1.2 | Integer32 (100..65535) | RC | |
column · Integer32 (100..65535) · read-create · current This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] | ||||
| CjuniOspfIfBfdMinTxInterval | 1.3.6.1.4.1.4874.2.2.14.1.8.1.3 | Integer32 (100..65535) | RC | |
column · Integer32 (100..65535) · read-create · current This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] | ||||
| CjuniOspfIfBfdMultiplier | 1.3.6.1.4.1.4874.2.2.14.1.8.1.4 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current This variable specifies detection-multiplier | ||||
| TjuniOspfVirtIfTable | 1.3.6.1.4.1.4874.2.2.14.1.9 | NA | ||
table · not-accessible · current The Juniper OSPF virtual interface table describes the OSPF-specific characteristics of virtual interfaces. | ||||
| RjuniOspfVirtIfEntry | 1.3.6.1.4.1.4874.2.2.14.1.9.1 | NA | ||
row · not-accessible · current The OSPF virtual interface entry describes OSPF-specific characteristics of one virtual interface.
| ||||
| CjuniOspfVirtIfMd5AuthKey | 1.3.6.1.4.1.4874.2.2.14.1.9.1.1 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current The MD5 authentication key. When setting this object, the juniOspfVirtIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use ospfVirtIfAuthKey. Setting this object will have the side effect of adding or updating the correspondent entry in juniOspfMd5IntfKeyTable. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero. | ||||
| CjuniOspfVirtIfMd5AuthKeyId | 1.3.6.1.4.1.4874.2.2.14.1.9.1.2 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current The MD5 authentication key id. When setting this object, juniOspfVirtIfMd5AuthKey must be specified on the same psu. | ||||
| TjuniOspfNbrTable | 1.3.6.1.4.1.4874.2.2.14.1.10 | NA | ||
table · not-accessible · current The Juniper OSPF neighbor table describes the OSPF-specific characteristics of neighbors. | ||||
| RjuniOspfNbrEntry | 1.3.6.1.4.1.4874.2.2.14.1.10.1 | NA | ||
row · not-accessible · current The OSPF neighbor entry describes OSPF-specific characteristics of one neighbor.
| ||||
| CjuniOspfNbrLocalIpAddr | 1.3.6.1.4.1.4874.2.2.14.1.10.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The local IP address on this OSPF circuit. | ||||
| CjuniOspfNbrDR | 1.3.6.1.4.1.4874.2.2.14.1.10.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The neighbor's idea of designated router. | ||||
| CjuniOspfNbrBDR | 1.3.6.1.4.1.4874.2.2.14.1.10.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The neighbor's idea of backup designated router. | ||||
| TjuniOspfSummImportTable | 1.3.6.1.4.1.4874.2.2.14.1.15 | NA | ||
table · not-accessible · current The Juniper OSPF summary import table describes the OSPF-specific characteristics of network aggregation into the OSPF autonomous system. With this table, the load of advertising many external routes can be reduced by specifying a range which includes some or all of the external routes. | ||||
| RjuniOspfSummImportEntry | 1.3.6.1.4.1.4874.2.2.14.1.15.1 | NA | ||
row · not-accessible · current The OSPF summary import entry describes OSPF-specific characteristics of one summary report. | ||||
| CjuniOspfSummAggNet | 1.3.6.1.4.1.4874.2.2.14.1.15.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The summary address for a range of addresses. | ||||
| CjuniOspfSummAggMask | 1.3.6.1.4.1.4874.2.2.14.1.15.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask used for the summary route. | ||||
| CjuniOspfSummAdminStat | 1.3.6.1.4.1.4874.2.2.14.1.15.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The admin status of this summary aggregation.
| ||||
| CjuniOspfSummRowStatus | 1.3.6.1.4.1.4874.2.2.14.1.15.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This variable displays the status of the entry. | ||||
| TjuniOspfMd5IntfTable | 1.3.6.1.4.1.4874.2.2.14.1.16 | NA | ||
table · not-accessible · current The Juniper OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be used for the simple password authentication. | ||||
| RjuniOspfMd5IntfEntry | 1.3.6.1.4.1.4874.2.2.14.1.16.1 | NA | ||
row · not-accessible · current The OSPF interface MD5 key entry describes OSPF-specific characteristics of one MD5 authentication's interface. | ||||
| CjuniOspfMd5IntfKeyId | 1.3.6.1.4.1.4874.2.2.14.1.16.1.1 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The OSPF interface this key belongs to. | ||||
| CjuniOspfMd5IntfKeyActive | 1.3.6.1.4.1.4874.2.2.14.1.16.1.2 | TruthValue | RC | deprecated |
column · TruthValue · read-create · deprecated Set this object to true(1) in order to have this key active. | ||||
| CjuniOspfMd5IntfAuthKey | 1.3.6.1.4.1.4874.2.2.14.1.16.1.3 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero. | ||||
| CjuniOspfMd5IntfRowStatus | 1.3.6.1.4.1.4874.2.2.14.1.16.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This variable displays the status of the entry. | ||||
| TjuniOspfMd5VirtIntfTable | 1.3.6.1.4.1.4874.2.2.14.1.17 | NA | ||
table · not-accessible · current The Juniper OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be used for the simple password authentication. | ||||
| RjuniOspfMd5VirtIntfEntry | 1.3.6.1.4.1.4874.2.2.14.1.17.1 | NA | ||
row · not-accessible · current The OSPF Interface MD5 Key entry describes OSPF-specific characteristics of one MD5 authentication's interface. | ||||
| CjuniOspfMd5VirtIntfAreaId | 1.3.6.1.4.1.4874.2.2.14.1.17.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF area ID this key belongs to. | ||||
| CjuniOspfMd5VirtIntfNeighbor | 1.3.6.1.4.1.4874.2.2.14.1.17.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF neightbor this key belongs to. | ||||
| CjuniOspfMd5VirtIntfKeyId | 1.3.6.1.4.1.4874.2.2.14.1.17.1.3 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The OSPF virtual interface this key belongs to. | ||||
| CjuniOspfMd5VirtIntfKeyActive | 1.3.6.1.4.1.4874.2.2.14.1.17.1.4 | TruthValue | RC | deprecated |
column · TruthValue · read-create · deprecated Set this object to true(1) in order to have this key active. | ||||
| CjuniOspfMd5VirtIntfAuthKey | 1.3.6.1.4.1.4874.2.2.14.1.17.1.5 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero. | ||||
| CjuniOspfMd5VirtIntfRowStatus | 1.3.6.1.4.1.4874.2.2.14.1.17.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This variable displays the status of the entry. | ||||
| TjuniOspfNetworkRangeTable | 1.3.6.1.4.1.4874.2.2.14.1.18 | NA | ||
table · not-accessible · current The Juniper OSPF network range table describes the OSPF-specific characteristics of network ranges, encompassing one or multiple OSPF interfaces. | ||||
| RjuniOspfNetworkRangeEntry | 1.3.6.1.4.1.4874.2.2.14.1.18.1 | NA | ||
row · not-accessible · current The Juniper OSPF network range entry describes OSPF-specific characteristics of one OSPF network range. | ||||
| CjuniOspfNetRangeNet | 1.3.6.1.4.1.4874.2.2.14.1.18.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The network range address. | ||||
| CjuniOspfNetRangeMask | 1.3.6.1.4.1.4874.2.2.14.1.18.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask used for the network range. Unlike the mask used under the command line interface (CLI), this object is set in the non-inversed format (i.e. not a wild-card mask). | ||||
| CjuniOspfNetRangeAreaId | 1.3.6.1.4.1.4874.2.2.14.1.18.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF area ID this network range belongs to. | ||||
| CjuniOspfNetRangeRowStatus | 1.3.6.1.4.1.4874.2.2.14.1.18.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This variable displays the status of the entry. | ||||
| NjuniOspfConformance | 1.3.6.1.4.1.4874.2.2.14.4 | |||
| NjuniOspfCompliances | 1.3.6.1.4.1.4874.2.2.14.4.1 | |||
| MjuniOspfCompliance | 1.3.6.1.4.1.4874.2.2.14.4.1.1 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper OSPF MIB. This statement became obsolete when juniOspfVpnRouteTag, juniOspfDomainId, juniOspfAreaTeCapable and juniOspfMplsTeRtrIdIfIndex were added to the basic group. | ||||
| MjuniOspfCompliance2 | 1.3.6.1.4.1.4874.2.2.14.4.1.2 | obsolete | ||
compliance · obsolete The compliance statement for entities which implement the Juniper OSPF MIB. This statement became obsolete when juniOspfIfBFDTable was implemented. | ||||
| MjuniOspfCompliance3 | 1.3.6.1.4.1.4874.2.2.14.4.1.3 | |||
compliance · current The compliance statement for entities which implement the Juniper OSPF MIB. | ||||
| NjuniOspfGroups | 1.3.6.1.4.1.4874.2.2.14.4.2 | |||
| GjuniOspfBasicGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.1 | obsolete | ||
group · obsolete Obsolete collection of objects for managing general OSPF capabilities in a Juniper product. This group became obsolete when juniOspfVpnRouteTag, juniOspfDomainId, juniOspfAreaTeCapable and juniOspfMplsTeRtrIdIfIndex were added.
| ||||
| GjuniOspfIfGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.2 | |||
group · current A collection of objects which augments the standard MIB objects for managing OSPF Interface capabilities in a Juniper product. | ||||
| GjuniOspfAreaGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.3 | |||
group · current An object which augments the standard MIB objects for managing OSPF areas capabilities in a Juniper product. | ||||
| GjuniOspfVirtIfGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.4 | |||
group · current A collection of objects which augments the standard MIB objects for managing OSPF virtual interface capabilities in a Juniper product. | ||||
| GjuniOspfNbrGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.5 | |||
group · current A collection of objects which augments the standard MIB objects for managing OSPF neighbor capabilities in a Juniper product. | ||||
| GjuniOspfSummImportGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.6 | |||
group · current A collection of objects for managing OSPF summary report capabilities in a Juniper product. | ||||
| GjuniOspfMd5IntfGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.7 | |||
group · current A collection of objects for managing OSPF MD5 interfaces capabilities in a Juniper product. | ||||
| GjuniOspfMd5VirtIntfGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.8 | |||
group · current A collection of objects for managing OSPF MD5 virtual interfaces capabilities in a Juniper product. | ||||
| GjuniOspfNetRangeGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.9 | |||
group · current A collection of objects for managing OSPF network range capabilities in a Juniper product. | ||||
| GjuniOspfBasicGroup2 | 1.3.6.1.4.1.4874.2.2.14.4.2.10 | |||
group · current A collection of objects for managing general OSPF capabilities in a Juniper product.
| ||||
| GjuniOspfIfBFDGroup | 1.3.6.1.4.1.4874.2.2.14.4.2.11 | |||
group · current A collection of objects for OSPFv2 BFD client configuration. | ||||