Juniper-LOG-MIB
Juniper Networks/UnisphereThe Logging Facility MIB for the Juniper Networks enterprise.
snmptranslate -m Juniper-LOG-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-LOG-MIB <host> 1.3.6.1.4.1.4874.2.2.28Imports
| Juniper-MIBs | juniMibs |
|---|---|
| Juniper-TC | JuniLogSeverity |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniLogMIB | 1.3.6.1.4.1.4874.2.2.28 | |||
identity The Logging Facility MIB for the Juniper Networks enterprise. | ||||
| NjuniLogTrapPrefix | 1.3.6.1.4.1.4874.2.2.28.0 | |||
| !juniLogMsgThresholdTrap | 1.3.6.1.4.1.4874.2.2.28.0.1 | |||
notification · current This trap is generated to report that an incremental number of log messages (described by the value of juniLogMsgThreshold) have been added to juniLogMsgTable. | ||||
| NjuniLogObjects | 1.3.6.1.4.1.4874.2.2.28.1 | |||
| NjuniLogDestinations | 1.3.6.1.4.1.4874.2.2.28.1.1 | |||
| NjuniLogDestSyslog | 1.3.6.1.4.1.4874.2.2.28.1.1.1 | |||
| SjuniLogDestSyslogSeverity | 1.3.6.1.4.1.4874.2.2.28.1.1.1.1 | JuniLogSeverity | RW | obsolete |
scalar · JuniLogSeverity · read-write · obsolete The minimum severity level of messages sent to the SYSLOG server. A value of 'off' indicates no log messages are sent to this destination. | ||||
| SjuniLogDestSyslogAddress | 1.3.6.1.4.1.4874.2.2.28.1.1.1.2 | IpAddress | RW | obsolete |
scalar · IpAddress · read-write · obsolete The IP address of the SYSLOG server to which log messages are to be sent. A value of 0.0.0.0 indicates no server address is configured. | ||||
| TjuniLogSyslogTable | 1.3.6.1.4.1.4874.2.2.28.1.1.1.3 | NA | ||
table · not-accessible · current A table describing the characteristics of each syslog destination. | ||||
| RjuniLogSyslogEntry | 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1 | NA | ||
row · not-accessible · current An entry describingthe characteristics of a syslog destination. | ||||
| CjuniLogSyslogIpAddress | 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of this syslog destination. This value must be a unicast IP address. | ||||
| CjuniLogSyslogRowStatus | 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' are supported. | ||||
| CjuniLogSyslogSeverity | 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.3 | JuniLogSeverity | RC | |
column · JuniLogSeverity · read-create · current The severity level for this syslog destination. Setting this value to 'off' suppresses log messages from being sent to this syslog destination. | ||||
| CjuniLogSyslogFacility | 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.4 | JuniLogSyslogFacility | RC | |
column · JuniLogSyslogFacility · read-create · current The facility id attached to messages sent to this syslog destination. | ||||
| NjuniLogDestConsole | 1.3.6.1.4.1.4874.2.2.28.1.1.2 | |||
| SjuniLogDestConsoleSeverity | 1.3.6.1.4.1.4874.2.2.28.1.1.2.1 | JuniLogSeverity | RW | |
scalar · JuniLogSeverity · read-write · current The minimum severity level of messages sent to the console. A value of 'off' indicates no log messages are sent to this destination. | ||||
| NjuniLogDestNvFile | 1.3.6.1.4.1.4874.2.2.28.1.1.3 | |||
| SjuniLogDestNvFileSeverity | 1.3.6.1.4.1.4874.2.2.28.1.1.3.1 | JuniLogSeverity | RW | |
scalar · JuniLogSeverity · read-write · current The minimum severity level of messages sent to the nonvolatile log file. A value of 'off' indicates no log messages are to be sent to this destination. | ||||
| NjuniLogCategories | 1.3.6.1.4.1.4874.2.2.28.1.2 | |||
| NjuniLogCatScalars | 1.3.6.1.4.1.4874.2.2.28.1.2.1 | |||
| TjuniLogCatTable | 1.3.6.1.4.1.4874.2.2.28.1.2.2 | NA | ||
table · not-accessible · current A table describing the characteristics of each log category. | ||||
| RjuniLogCatEntry | 1.3.6.1.4.1.4874.2.2.28.1.2.2.1 | NA | ||
row · not-accessible · current An entry describing the characteristics of a log category.
| ||||
| CjuniLogCatIndex | 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current An integer index uniquely associated with a log. Index values do not necessarily persist across system reboots. Following reboot, mappings of (reboot-invariant) log category names to log index values is available in the juniLogCatNameTable. | ||||
| CjuniLogCatName | 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.2 | JuniLogCatName | RO | |
column · JuniLogCatName · read-only · current The name of this log category. | ||||
| CjuniLogCatDescr | 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current A description of the functionality for which events are recorded by this log category. | ||||
| CjuniLogCatEngineering | 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current An indication of whether this log is intended mainly for engineering development and debug purposes. | ||||
| CjuniLogCatDiscards | 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of messages generated by this log category that were discarded because of resource limitations. | ||||
| CjuniLogCatSeverity | 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.6 | JuniLogSeverity | RW | |
column · JuniLogSeverity · read-write · current The severity level for this log category. The value 'off' disables recording of this log category's messages. For other severity level values, only messages at or above this severity level will be logged in juniLogMsgTable. | ||||
| CjuniLogCatVerbosity | 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.7 | JuniLogVerbosity | RW | |
column · JuniLogVerbosity · read-write · current The verbosity level for this log category. Supplementary information may be available for certain event types. This object controls whether that additional information, if available for a given event, is recorded. | ||||
| TjuniLogCatNameTable | 1.3.6.1.4.1.4874.2.2.28.1.2.3 | NA | ||
table · not-accessible · current A table mapping each log category's name to its index. | ||||
| RjuniLogCatNameEntry | 1.3.6.1.4.1.4874.2.2.28.1.2.3.1 | NA | ||
row · not-accessible · current An entry mapping a log category's name to its index.
| ||||
| CjuniLogCatNameName | 1.3.6.1.4.1.4874.2.2.28.1.2.3.1.1 | JuniLogCatName | RO | |
column · JuniLogCatName · read-only · current The name of the log category. | ||||
| CjuniLogCatNameIndex | 1.3.6.1.4.1.4874.2.2.28.1.2.3.1.2 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The log index associated with this log category. | ||||
| NjuniLogMessages | 1.3.6.1.4.1.4874.2.2.28.1.3 | |||
| NjuniLogMsgScalars | 1.3.6.1.4.1.4874.2.2.28.1.3.1 | |||
| SjuniLogMsgCapacity | 1.3.6.1.4.1.4874.2.2.28.1.3.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum capacity, in number of log messages, of the juniLogMsgTable.
| ||||
| SjuniLogMsgLastSeqNumber | 1.3.6.1.4.1.4874.2.2.28.1.3.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sequence number of the most recent juniLogMsgTable entry. By monitoring this object's rate of change in relation to the juniLogMsgTable capacity, a management client can determine whether it is polling juniLogMsgTable frequently enough to avoid missing log messages. | ||||
| TjuniLogMsgTable | 1.3.6.1.4.1.4874.2.2.28.1.3.2 | NA | ||
table · not-accessible · current A table of log messages generated by this device. | ||||
| RjuniLogMsgEntry | 1.3.6.1.4.1.4874.2.2.28.1.3.2.1 | NA | ||
row · not-accessible · current A log message generated by this device. | ||||
| CjuniLogMsgSysUpTimeStamp | 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.1 | TimeStamp | NA | |
column · TimeStamp · not-accessible · current The value of sysUpTime when this log message was recorded. | ||||
| CjuniLogMsgSequenceNumber | 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current A sequence number that uniquely identifies this entry. Sequence numbers are assigned consecutively beginning with 1. More recent entries have higher sequence numbers. | ||||
| CjuniLogMsgCatName | 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.3 | JuniLogCatName | RO | |
column · JuniLogCatName · read-only · current Name of the log category that contributed this message. | ||||
| CjuniLogMsgCatIndex | 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Index of the log category that contributed this message. | ||||
| CjuniLogMsgSeverity | 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.5 | JuniLogSeverity | RO | |
column · JuniLogSeverity · read-only · current The severity of the message. | ||||
| CjuniLogMsgText | 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The text of the log message.
Truncation of log message text is indicated by n asterisk character
('*') in the last octet of a maximum-size string. | ||||
| CjuniLogMsgDateAndTimeStamp | 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current The date and time this message was generated. | ||||
| NjuniLogTrapControl | 1.3.6.1.4.1.4874.2.2.28.2 | |||
| SjuniLogMsgThreshold | 1.3.6.1.4.1.4874.2.2.28.2.1 | Integer32 (0..100) | RW | |
scalar · Integer32 (0..100) · read-write · current Number of log messages which, when added to juniLogMsgTable, cause a juniLogMsgThresholdTrap to be generated. This value is expressed as a percentage of the capacity of juniLogMsgTable. A value of zero disables trap generation.
| ||||
| NjuniLogMIBConformance | 1.3.6.1.4.1.4874.2.2.28.4 | |||
| NjuniLogMIBCompliances | 1.3.6.1.4.1.4874.2.2.28.4.1 | |||
| MjuniLogCompliance | 1.3.6.1.4.1.4874.2.2.28.4.1.1 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper Networks Log MIB. This statement became obsolete when support for multiple SYSLOGs was added.
| ||||
| MjuniLogCompliance2 | 1.3.6.1.4.1.4874.2.2.28.4.1.2 | |||
compliance · current The compliance statement for entities which implement the Juniper Networks Log MIB, including support for multiple SYSLOG destinations.
| ||||
| NjuniLogMIBGroups | 1.3.6.1.4.1.4874.2.2.28.4.2 | |||
| GjuniLogGroup | 1.3.6.1.4.1.4874.2.2.28.4.2.1 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of Juniper Networks logging capabilities. This group became obsolete when support for multiple SYSLOGs was added.
| ||||
| GjuniLogGroup2 | 1.3.6.1.4.1.4874.2.2.28.4.2.2 | |||
group · current A collection of objects providing management of Juniper Networks logging capabilities, including support for multiple SYSLOG destinations.
| ||||
| GjuniLogTrapGroup | 1.3.6.1.4.1.4874.2.2.28.4.2.3 | |||
group · current A management notification pertaining to logging operations.
| ||||
Textual conventions
JuniLogCatNameOCTET STRING (SIZE (1..32))Display hint:
32aThe name of a log category. Represents textual information taken from the NVT ASCII character set.
JuniLogSyslogFacilityINTEGERlocal0(0)local1(1)local2(2)local3(3)local4(4)local5(5)local6(6)local7(7)The syslog daemon facility id.
JuniLogVerbosityINTEGERhigh(2)low(0)medium(1)The log verbosity level. Not all event types offer medium- or high-verbosity levels of detail.
Traps / Notifications
- juniLogMsgThresholdTrap
1.3.6.1.4.1.4874.2.2.28.0.1