Juniper-IPsec-Tunnel-MIB
Juniper Networks/UnisphereThe IPsec Tunnel MIB for the Juniper Networks enterprise.
snmptranslate -m Juniper-IPsec-Tunnel-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-IPsec-Tunnel-MIB <host> 1.3.6.1.4.1.4874.2.2.70Imports
| IF-MIB | InterfaceIndex |
|---|---|
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniName, JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniIpsecTunnelMIB | 1.3.6.1.4.1.4874.2.2.70 | |||
identity The IPsec Tunnel MIB for the Juniper Networks enterprise. | ||||
| NjuniIpsecObjects | 1.3.6.1.4.1.4874.2.2.70.1 | |||
| NjuniIpsecTunnel | 1.3.6.1.4.1.4874.2.2.70.1.1 | |||
| SjuniIpsecTunnelNextIfIndex | 1.3.6.1.4.1.4874.2.2.70.1.1.1 | JuniNextIfIndex | RO | |
scalar · JuniNextIfIndex · read-only · current Coordinate ifIndex value allocation for entries in the juniIpsecTunnelIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | ||||
| TjuniIpsecTunnelInterfaceTable | 1.3.6.1.4.1.4874.2.2.70.1.1.2 | NA | ||
table · not-accessible · current This table contains entries of IPsec Tunnel interfaces. | ||||
| RjuniIpsecTunnelInterfaceEntry | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of a single IPsec Tunnel interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. | ||||
| CjuniIpsecTunnelIfIndex | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the IPsec tunnel interface. When creating entries in this table, suitable values for this object are determined by reading juniIpsecTunnelNextIfIndex. | ||||
| CjuniIpsecTunnelName | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.2 | DisplayString (SIZE (0..80)) | RC | |
column · DisplayString (SIZE (0..80)) · read-create · current The administratively assigned name for this IPsec Tunnel interface. Before configuring other tunnel attributes, IPsec tunnel has to be created with minimum attributes (tunnel name and rowStatus). | ||||
| CjuniIpsecTunnelType | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.3 | JuniIpsecTunnelType | RC | |
column · JuniIpsecTunnelType · read-create · current The configured mode for this IPsec Tunnel interface. | ||||
| CjuniIpsecTunnelTransportVirtualRouter | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.4 | JuniName | RC | |
column · JuniName · read-create · current The transport virtual router associated with this IPsec tunnel interface. This object need not be set when creating row entries. Note that the default when this object is not specified is the router associated with the agent acting on the management request. | ||||
| CjuniIpsecTunnelLocalEndPt | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The tunnel local endpoint. | ||||
| CjuniIpsecTunnelRemoteEndPt | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The tunnel remote endpoint. | ||||
| CjuniIpsecTunnelTransformSet | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.7 | DisplayString (SIZE (0..64)) | RC | |
column · DisplayString (SIZE (0..64)) · read-create · current The transform set. It refers to a transform set that is defined in the transform set table. | ||||
| CjuniIpsecTunnelSrcType | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.8 | JuniIpsecIdentityType | RC | |
column · JuniIpsecIdentityType · read-create · current The tunnel source type. The tunnel source may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, or 3. a user fully qualified domain name string. | ||||
| CjuniIpsecTunnelSrcAddr | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.9 | IpAddress | RC | |
column · IpAddress · read-create · current The tunnel source IP(V4) address. | ||||
| CjuniIpsecTunnelSrcName | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.10 | DisplayString (SIZE (0..80)) | RC | |
column · DisplayString (SIZE (0..80)) · read-create · current The tunnel source Name. | ||||
| CjuniIpsecTunnelDstType | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.11 | JuniIpsecIdentityType | RC | |
column · JuniIpsecIdentityType · read-create · current The tunnel destination type. The tunnel destination may be identified
by:
1. an IP(V4) address, or
2. a fully qualified domain name string, or
3. a user fully qualified domain name string. | ||||
| CjuniIpsecTunnelDstAddr | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.12 | IpAddress | RC | |
column · IpAddress · read-create · current The tunnel destination IP(V4) address. | ||||
| CjuniIpsecTunnelDstName | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.13 | DisplayString (SIZE (0..80)) | RC | |
column · DisplayString (SIZE (0..80)) · read-create · current The tunnel destination Name. | ||||
| CjuniIpsecTunnelBackupDstType | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.14 | JuniIpsecIdentityType | RC | |
column · JuniIpsecIdentityType · read-create · current The tunnel backup destination type. The tunnel backup destination type has to be the same as the tunnel destination type The tunnel destination may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, 3. a user fully qualified domain name string. | ||||
| CjuniIpsecTunnelBackupDstAddr | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.15 | IpAddress | RC | |
column · IpAddress · read-create · current The tunnel backup destination IP(V4) address. | ||||
| CjuniIpsecTunnelBackupDstName | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.16 | DisplayString (SIZE (0..80)) | RC | |
column · DisplayString (SIZE (0..80)) · read-create · current The tunnel backup destination Name. | ||||
| CjuniIpsecTunnelLocalIdType | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.17 | JuniIpsecIdentityType | RC | |
column · JuniIpsecIdentityType · read-create · current The tunnel phase-2 local identity type. The tunnel local identity type
may be identified by:
1. an IP address, or
2. an IP address subnet, or
3. an IP address range. | ||||
| CjuniIpsecTunnelLocalIdAddr1 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.18 | IpAddress | RC | |
column · IpAddress · read-create · current The tunnel local phase-2 identity IP address 1. | ||||
| CjuniIpsecTunnelLocalIdAddr2 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.19 | IpAddress | RC | |
column · IpAddress · read-create · current The tunnel local phase-2 identity IP address 2 in the case the identity type is an IP address range. The tunnel local phase-2 identity netmask in the case the identity type is an IP address subnet. | ||||
| CjuniIpsecTunnelRemoteIdType | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.20 | JuniIpsecIdentityType | RC | |
column · JuniIpsecIdentityType · read-create · current The tunnel phase-2 remote identity type. The tunnel remote identity
type may be identified by:
1. an IP address, or
2. an IP address subnet, or
3. an IP address range. | ||||
| CjuniIpsecTunnelRemoteIdAddr1 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.21 | IpAddress | RC | |
column · IpAddress · read-create · current The tunnel remote phase-2 identity IP address 1. | ||||
| CjuniIpsecTunnelRemoteIdAddr2 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.22 | IpAddress | RC | |
column · IpAddress · read-create · current The tunnel remote phase-2 identity IP address 2 in the case the identity type is an IP address range. The tunnel remote phase-2 identity netmask in the case the identity type is an IP address subnet. | ||||
| CjuniIpsecTunnelLifeTimeSecs | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.23 | Unsigned32 (1800..864000) | RC | |
column · Unsigned32 (1800..864000) · read-create · current The tunnel lifetime in seconds.
| ||||
| CjuniIpsecTunnelLifeTimeKBs | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.24 | Unsigned32 (102400..4294967295) | RC | |
column · Unsigned32 (102400..4294967295) · read-create · current The tunnel lifetime in kilobytes.
| ||||
| CjuniIpsecTunnelPfsGroup | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.25 | JuniIpsecPfsGroup | RC | |
column · JuniIpsecPfsGroup · read-create · current The tunnel perfect forward secrecty group. | ||||
| CjuniIpsecTunnelMtu | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.26 | Unsigned32 (160..9000) | RC | |
column · Unsigned32 (160..9000) · read-create · current The tunnel MTU. | ||||
| CjuniIpsecTunnelInboundSpi1 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.27 | Spi | RO | |
column · Spi · read-only · current The tunnel inbound SPI 1. | ||||
| CjuniIpsecTunnelInboundTransform1 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.28 | JuniIpsecTransformType | RO | |
column · JuniIpsecTransformType · read-only · current The tunnel inbound transform 1. | ||||
| CjuniIpsecTunnelInboundSpi2 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.29 | Spi | RO | |
column · Spi · read-only · current The tunnel inbound SPI 2. | ||||
| CjuniIpsecTunnelInboundTransform2 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.30 | JuniIpsecTransformType | RO | |
column · JuniIpsecTransformType · read-only · current The tunnel inbound transform 2. | ||||
| CjuniIpsecTunnelInboundSpi3 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.31 | Spi | RO | |
column · Spi · read-only · current The tunnel inbound SPI 3. | ||||
| CjuniIpsecTunnelInboundTransform3 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.32 | JuniIpsecTransformType | RO | |
column · JuniIpsecTransformType · read-only · current The tunnel inbound transform 3. | ||||
| CjuniIpsecTunnelInboundSpi4 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.33 | Spi | RO | |
column · Spi · read-only · current The tunnel inbound SPI 4. | ||||
| CjuniIpsecTunnelInboundTransform4 | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.34 | JuniIpsecTransformType | RO | |
column · JuniIpsecTransformType · read-only · current The tunnel inbound transform 4. | ||||
| CjuniIpsecTunnelOutboundSpi | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.35 | Spi | RO | |
column · Spi · read-only · current The tunnel outbound SPI. | ||||
| CjuniIpsecTunnelOutboundTransform | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.36 | JuniIpsecTransformType | RO | |
column · JuniIpsecTransformType · read-only · current The tunnel outbound transform. | ||||
| CjuniIpsecTunnelRowStatus | 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.37 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpsecTunnelIfRowStatus
juniIpsecTunnelName
In addition, when creating an entry the following condition must hold:
A value for juniIpsecTunnelIfIndex must have been determined
previously, typically by reading juniIpsecTunnelNextIfIndex.
Once created, the following objects may not be modified:
juniIpsecTunnelName
juniIpsecTunnelVirtualRouter
A corresponding entry in ifTable/ifXTable/juniIfTable is created/
destroyed as a result of creating/destroying an entry in this table. | ||||
| TjuniIpsecTunnelStatTable | 1.3.6.1.4.1.4874.2.2.70.1.1.3 | NA | ||
table · not-accessible · current The IPsec tunnel interface statistics table. Describes the IPsec tunnel inbound/outbound statistics on IPsec de/encapsulation, de/encryption, and related error statistics. | ||||
| RjuniIpsecTunnelStatEntry | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1 | NA | ||
row · not-accessible · current Describes the ipsec traffic statistics of the ipsec tunnel interface. | ||||
| CjuniIpsecTunnelStatIfIndex | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. | ||||
| CjuniIpsecTunnelStatInbUserRecvPkts | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of inbound user packets (non-error) received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbUserRecvOctets | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of inbound user octets (non-error) received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbAccRecvPkts | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of inbound encapsulated packets received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbAccRecvOctets | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of inbound encapsulated octets received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbAuthErrs | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of inbound packets with authentication errors received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbReplayErrs | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of inbound packets with replay errors received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbPolicyErrs | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of inbound packets with inbound policy errors received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbOtherRecvErrs | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of inbound packets with other Rx errors received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbDecryptErrs | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of inbound packets with decryption errors received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatInbPadErrs | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of inbound packets with pad errors received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatOutbUserRecvPkts | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of outbound user packets received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatOutbUserRecvOctets | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of outbound user octets received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatOutbAccRecvPkts | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of encapsulated outbound packets received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelStatOutbAccRecvOctets | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of encapsulated outbound octets received for this IPsec tunnel. | ||||
| CjuniIpsecTunnelOutbOtherTxErrs | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of outbound packets with other TX errors for this IPsec tunnel. | ||||
| CjuniIpsecTunnelOutbPolicyErrs | 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of outbound packets with outbound policy errors for this IPsec tunnel. | ||||
| TjuniIpsecTunnelTransformSetTable | 1.3.6.1.4.1.4874.2.2.70.1.1.4 | NA | ||
table · not-accessible · current This table contains entries of IPsec transform sets defined for this router. | ||||
| RjuniIpsecTunnelTransformSetEntry | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1 | NA | ||
row · not-accessible · current Each entry describes a transform set that contains up to 6 IPsec transforms. The transform set name is referenced by the IPsec tunnel as its local IPsec policy. | ||||
| CjuniIpsecTunnelTransformSetName | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.1 | DisplayString (SIZE (0..64)) | NA | |
column · DisplayString (SIZE (0..64)) · not-accessible · current The name of the IPsec tunnel transform set. | ||||
| CjuniIpsecTunnelTransform1 | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.2 | JuniIpsecTransformType | RC | |
column · JuniIpsecTransformType · read-create · current The first IPsec transform in the transform set. | ||||
| CjuniIpsecTunnelTransform2 | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.3 | JuniIpsecTransformType | RC | |
column · JuniIpsecTransformType · read-create · current The second IPsec transform in the transform set. | ||||
| CjuniIpsecTunnelTransform3 | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.4 | JuniIpsecTransformType | RC | |
column · JuniIpsecTransformType · read-create · current The third IPsec transform in the transform set. | ||||
| CjuniIpsecTunnelTransform4 | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.5 | JuniIpsecTransformType | RC | |
column · JuniIpsecTransformType · read-create · current The fourth IPsec transform in the transform set. | ||||
| CjuniIpsecTunnelTransform5 | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.6 | JuniIpsecTransformType | RC | |
column · JuniIpsecTransformType · read-create · current The fifth IPsec transform in the transform set. | ||||
| CjuniIpsecTunnelTransform6 | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.7 | JuniIpsecTransformType | RC | |
column · JuniIpsecTransformType · read-create · current The sixth IPsec transform in the transform set. | ||||
| CjuniIpsecTunnelTransformSetRowStatus | 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpsecTunnelTransformSetRowStatus
juniIpsecTunnelTransformSetName
juniIpsecTunnelTransform1. | ||||
| TjuniIpsecTunnelGlobalLocalEndpointTable | 1.3.6.1.4.1.4874.2.2.70.1.1.5 | NA | ||
table · not-accessible · current This table contains entries of global local endpoint for the IPsec tunnel. There is one global local endpoint for each transport virtual router if configured. | ||||
| RjuniIpsecTunnelGlobalLocalEndpointEntry | 1.3.6.1.4.1.4874.2.2.70.1.1.5.1 | NA | ||
row · not-accessible · current Each entry defines the global local endpoint for the transport virtual router. | ||||
| CjuniIpsecTunnelTransportVrRouterIdx | 1.3.6.1.4.1.4874.2.2.70.1.1.5.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The transport virtual router for the global local endpoint. | ||||
| CjuniIpsecTunnelGlobalLocalEndpoint | 1.3.6.1.4.1.4874.2.2.70.1.1.5.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The global local endpoint for the transport virtual router. | ||||
| CjuniIpsecTunnelGlobalLocalEndpointRowStatus | 1.3.6.1.4.1.4874.2.2.70.1.1.5.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpsecTunnelGlobalLocalEndpoint
juniIpsecTunnelTransportVrRouterIdx
Once created, the global local endpoint can not be changed unless there
is no IPsec tunnel references to the local endpoint. | ||||
| NjuniIpsecSystem | 1.3.6.1.4.1.4874.2.2.70.1.2 | |||
| NjuniIpsecTunnelSystemStats | 1.3.6.1.4.1.4874.2.2.70.1.2.1 | |||
| SjuniIpsecSummaryStatsTotalTunnels | 1.3.6.1.4.1.4874.2.2.70.1.2.1.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of tunnels | ||||
| SjuniIpsecSummaryStatsAdminStatusEnabled | 1.3.6.1.4.1.4874.2.2.70.1.2.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of tunnels with administrative status enabled | ||||
| SjuniIpsecSummaryStatsAdminStatusDisabled | 1.3.6.1.4.1.4874.2.2.70.1.2.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of tunnels with administrative status disabled | ||||
| SjuniIpsecSummaryStatsOperStatusUp | 1.3.6.1.4.1.4874.2.2.70.1.2.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of tunnels with operational status up | ||||
| SjuniIpsecSummaryStatsOperStatusDown | 1.3.6.1.4.1.4874.2.2.70.1.2.1.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of tunnels with operational status down | ||||
| SjuniIpsecSummaryStatsOperStatusNotPresent | 1.3.6.1.4.1.4874.2.2.70.1.2.1.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of tunnels with operational status not-present | ||||
| NjuniIpsecTunnelMIBConformance | 1.3.6.1.4.1.4874.2.2.70.2 | |||
| NjuniIpsecTunnelMIBCompliances | 1.3.6.1.4.1.4874.2.2.70.2.1 | |||
| MjuniIpsecTunnelCompliance | 1.3.6.1.4.1.4874.2.2.70.2.1.1 | obsolete | ||
compliance · obsolete The compliance statement for SNMPv2 entities which implement the IPsec Tunnel MIB. | ||||
| MjuniIpsecTunnelCompliance2 | 1.3.6.1.4.1.4874.2.2.70.2.1.2 | |||
compliance · current The compliance statement for SNMPv2 entities which implement the IPsec Tunnel MIB. | ||||
| NjuniIpsecTunnelMIBGroups | 1.3.6.1.4.1.4874.2.2.70.2.2 | |||
| GjuniIpsecTunnelConfigGroup | 1.3.6.1.4.1.4874.2.2.70.2.2.1 | |||
group · current A collection of objects providing configuration information of the IPsec tunnel.
| ||||
| GjuniIpsecTunnelStatsGroup | 1.3.6.1.4.1.4874.2.2.70.2.2.2 | |||
group · current A collection of objects providing satistics information of the IPsec tunnel.
| ||||
| GjuniIpsecTransformSetGroup | 1.3.6.1.4.1.4874.2.2.70.2.2.3 | |||
group · current A collection of objects providing transform set information of the IPsec tunnel. | ||||
| GjuniIpsecGlobalLocalEndpointGroup | 1.3.6.1.4.1.4874.2.2.70.2.2.4 | |||
group · current A collection of objects providing the global local endpoint for the IPsec tunnel. | ||||
| GjuniIpsecTunnelSystemStatsGroup | 1.3.6.1.4.1.4874.2.2.70.2.2.5 | |||
group · current A collection of objects providing summary statistics information for IPsec tunnels in one system. | ||||
Textual conventions
JuniIpsecIdentityTypeINTEGERDisplay hint:
didDerAsn1Gn(10)idDn(9)idFqdn(2)idIpv4Addr(1)idIpv4AddrRange(7)idIpv4AddrSubnet(4)idIpv6Addr(5)idIpv6AddrRange(8)idIpv6AddrSubnet(6)idKeyId(11)idUserFqdn(3)reserved(0)The type of IPsec Phase-1 identity. The Phase-1 identity may be identified by one of the ID types defined in IPSEC DOI.
JuniIpsecPfsGroupINTEGERDisplay hint:
dgroup1(1)group2(2)group5(5)noGroup(0)The perfect forward secrecy group. Group1 - 768-bit DH prime modulus group. Group2 - 1024-bit DH prime modulus group. Group5 - 1536-bit DH prime modulus group.
JuniIpsecTransformTypeINTEGERDisplay hint:
dahMd5(1)ahSha(2)esp3DesMd5(4)esp3DesNullAuth(10)esp3DesSha(6)espDesMd5(3)espDesNullAuth(9)espDesSha(5)espNullMd5(7)espNullSha(8)reserved(0)The transform algorithm for the IPsec tunnel.
JuniIpsecTunnelTypeINTEGERDisplay hint:
dmanualTunnel(1)signaledTunnel(0)The ipsec tunnel type.
SpiUnsigned32 (0..4294967295)Display hint:
xThe type of the SPI associated with IPsec Phase-2 security associations.