Juniper-DS3-MIB
Juniper Networks/UnisphereThe DS3 MIB for the Juniper Networks enterprise. This MIB contains managed objects for DS3/E3 interfaces. Management objects are provided to supplement those found in the standard DS3-MIB (RFC 2496).
snmptranslate -m Juniper-DS3-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-DS3-MIB <host> 1.3.6.1.4.1.4874.2.2.4Imports
| DS3-MIB | dsx3FarEndConfigEntry, dsx3FarEndCurrentEntry, dsx3FarEndIntervalEntry, dsx3FarEndTotalEntry |
|---|---|
| IF-MIB | InterfaceIndexOrZero, ifIndex |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniNextIfIndex |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniDs3MIB | 1.3.6.1.4.1.4874.2.2.4 | |||
identity The DS3 MIB for the Juniper Networks enterprise. This MIB contains managed objects for DS3/E3 interfaces. Management objects are provided to supplement those found in the standard DS3-MIB (RFC 2496). | ||||
| NjuniDs3Objects | 1.3.6.1.4.1.4874.2.2.4.1 | |||
| TjuniDsx3ConfigTable | 1.3.6.1.4.1.4874.2.2.4.1.1 | NA | ||
table · not-accessible · current This table contains entries for DS3/E3 interfaces present in the system. | ||||
| RjuniDsx3ConfigEntry | 1.3.6.1.4.1.4874.2.2.4.1.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an DS3/E3 interface.
| ||||
| CjuniDsx3LineLength | 1.3.6.1.4.1.4874.2.2.4.1.1.1.1 | Integer32 (0..137) | RC | |
column · Integer32 (0..137) · read-create · current The length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry.
| ||||
| CjuniDsx3LineType | 1.3.6.1.4.1.4874.2.2.4.1.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current This variable indicates the variety of DS3 C-bit or E3 application
implementing this interface. The type of interface affects the
interpretation of the usage and error statistics. The rate of DS3 is
44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means
that the C-bits are not used except for sending/receiving AIS. Note
that this object represents the actual line type when the corresponding
value of dsx3LineType is dsx3other(1).
The values, in sequence, describe:
TITLE: SPECIFICATION:
dsx3M23 ANSI T1.107-1988
dsx3SYNTRAN ANSI T1.107-1988
dsx3CbitParity ANSI T1.107a-1989
dsx3ClearChannel ANSI T1.102-1987
e3G832 ITU-T G.832
e3Framed ITU-T G.751
e3Plcp ETSI T/NA(91)18.
dsx3M23Plcp ATM Forum af-phy-0054.000
dsx3CbitParityPlcp ATM Forum af-phy-0054.000
| ||||
| CjuniDsx3CellScramblerConfig | 1.3.6.1.4.1.4874.2.2.4.1.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces which do not support ATM, this object returns the value notSupported(3).
| ||||
| CjuniDsx3Channelization | 1.3.6.1.4.1.4874.2.2.4.1.1.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current The channelization setting for this DS3 interface; true(1) indicates channelization, false(2) indicates no channelization. | ||||
| CjuniDsx3InterfaceType | 1.3.6.1.4.1.4874.2.2.4.1.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The DS3 interface type setting.
| ||||
| CjuniDsx3Application | 1.3.6.1.4.1.4874.2.2.4.1.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The interface application setting.
| ||||
| CjuniDsx3Ds3Channel | 1.3.6.1.4.1.4874.2.2.4.1.1.1.7 | INTEGER (1..28) | RC | |
column · INTEGER (1..28) · read-create · current The DS3 channel setting. The range of channel settings depends on the line rate of the underlying interface. | ||||
| CjuniDsx3LowerIfIndex | 1.3.6.1.4.1.4874.2.2.4.1.1.1.8 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of the interface over which this DS3 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation. | ||||
| CjuniDsx3RowStatus | 1.3.6.1.4.1.4874.2.2.4.1.1.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support setting the
following values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniDsx3RowStatus
juniDsx3LowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for ifIndex must have been determined previously, by reading
juniDsx3NextIfIndex.
The interface identified by juniDsx3LowerIfIndex must exist.
A corresponding entry in ifTable/ifXTable/juniIfTable is created/
destroyed as a result of creating/destroying an entry in this table. | ||||
| CjuniDsx3Ds3DsuMode | 1.3.6.1.4.1.4874.2.2.4.1.1.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current The DSU configuration setting for this entry.
| ||||
| CjuniDsx3Ds3BandwidthLimit | 1.3.6.1.4.1.4874.2.2.4.1.1.1.11 | INTEGER (0..44210) | RC | |
column · INTEGER (0..44210) · read-create · current The DSU bandwidth configuration for this entry. | ||||
| CjuniDsx3Ds3DsuScrambleMode | 1.3.6.1.4.1.4874.2.2.4.1.1.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The DSU scramble mode setting for this entry.
| ||||
| CjuniDsx3MdlCarrier | 1.3.6.1.4.1.4874.2.2.4.1.1.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies the interface is used in carrier environment.
| ||||
| CjuniDsx3MdlTransmit | 1.3.6.1.4.1.4874.2.2.4.1.1.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies transmission enabling.
| ||||
| CjuniDsx3MdlEic | 1.3.6.1.4.1.4874.2.2.4.1.1.1.15 | DisplayString (SIZE (0..10)) | RC | |
column · DisplayString (SIZE (0..10)) · read-create · current This is the equipment identification code. | ||||
| CjuniDsx3MdlLic | 1.3.6.1.4.1.4874.2.2.4.1.1.1.16 | DisplayString (SIZE (0..11)) | RC | |
column · DisplayString (SIZE (0..11)) · read-create · current This is the location identification code. | ||||
| CjuniDsx3MdlFic | 1.3.6.1.4.1.4874.2.2.4.1.1.1.17 | DisplayString (SIZE (0..10)) | RC | |
column · DisplayString (SIZE (0..10)) · read-create · current This is the frame identification code. | ||||
| CjuniDsx3MdlUnit | 1.3.6.1.4.1.4874.2.2.4.1.1.1.18 | DisplayString (SIZE (0..6)) | RC | |
column · DisplayString (SIZE (0..6)) · read-create · current This is the unit identification code. | ||||
| CjuniDsx3MdlPfi | 1.3.6.1.4.1.4874.2.2.4.1.1.1.19 | DisplayString (SIZE (0..38)) | RC | |
column · DisplayString (SIZE (0..38)) · read-create · current This is the facility identification code to send in the MDL path message. | ||||
| CjuniDsx3MdlPort | 1.3.6.1.4.1.4874.2.2.4.1.1.1.20 | DisplayString (SIZE (0..38)) | RC | |
column · DisplayString (SIZE (0..38)) · read-create · current This is the equipment port number to send in the MDL idle signal message. | ||||
| CjuniDsx3MdlGenerator | 1.3.6.1.4.1.4874.2.2.4.1.1.1.21 | DisplayString (SIZE (0..38)) | RC | |
column · DisplayString (SIZE (0..38)) · read-create · current This is the generator number to send in the MDL test signal message. | ||||
| SjuniDs3NextIfIndex | 1.3.6.1.4.1.4874.2.2.4.1.2 | JuniNextIfIndex | RO | |
scalar · JuniNextIfIndex · read-only · current Coordinate ifIndex value allocation for entries in juniDsx3ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | ||||
| TjuniDsx3FarEndCurrentTable | 1.3.6.1.4.1.4874.2.2.4.1.3 | NA | ||
table · not-accessible · current This table contains entries for DS3/E3 interfaces present in the system. | ||||
| RjuniDsx3FarEndCurrentEntry | 1.3.6.1.4.1.4874.2.2.4.1.3.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an DS3/E3 interface.
| ||||
| CjuniDsx3FarEndCurrentInvalidSeconds | 1.3.6.1.4.1.4874.2.2.4.1.3.1.1 | PerfCurrentCount | RO | |
column · PerfCurrentCount · read-only · current The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the current 15 minute interval. | ||||
| TjuniDsx3FarEndIntervalTable | 1.3.6.1.4.1.4874.2.2.4.1.4 | NA | ||
table · not-accessible · current This table contains entries for DS3/E3 interfaces present in the system. | ||||
| RjuniDsx3FarEndIntervalEntry | 1.3.6.1.4.1.4874.2.2.4.1.4.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an DS3/E3 interface.
| ||||
| CjuniDsx3FarEndIntervalInvalidSeconds | 1.3.6.1.4.1.4874.2.2.4.1.4.1.1 | PerfIntervalCount | RO | |
column · PerfIntervalCount · read-only · current The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in one of the previous 96 individual 15 minute intervals. | ||||
| TjuniDsx3FarEndTotalTable | 1.3.6.1.4.1.4874.2.2.4.1.5 | NA | ||
table · not-accessible · current This table contains entries for DS3/E3 interfaces present in the system. | ||||
| RjuniDsx3FarEndTotalEntry | 1.3.6.1.4.1.4874.2.2.4.1.5.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an DS3/E3 interface.
| ||||
| CjuniDsx3FarEndTotalInvalidSeconds | 1.3.6.1.4.1.4874.2.2.4.1.5.1.1 | PerfTotalCount | RO | |
column · PerfTotalCount · read-only · current The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the previous 24 hour interval. | ||||
| TjuniDsx3FarEndConfigTable | 1.3.6.1.4.1.4874.2.2.4.1.6 | NA | ||
table · not-accessible · current This table contains entries for DS3/E3 interfaces present in the system. | ||||
| RjuniDsx3FarEndConfigEntry | 1.3.6.1.4.1.4874.2.2.4.1.6.1 | NA | ||
row · not-accessible · current Each entry describes the far end configuration characteristics of an DS3/E3 interface.
| ||||
| CjuniDsx3FarEndPortNumber | 1.3.6.1.4.1.4874.2.2.4.1.6.1.1 | DisplayString (SIZE (0..38)) | RW | |
column · DisplayString (SIZE (0..38)) · read-write · current This code identifies the port number of the Far End DS3. It is sent within the Idle Signal Message. | ||||
| CjuniDsx3FarEndGeneratorNumber | 1.3.6.1.4.1.4874.2.2.4.1.6.1.2 | DisplayString (SIZE (0..38)) | RW | |
column · DisplayString (SIZE (0..38)) · read-write · current This code identifies the Far End DS3 Generator Number. It is sent within the Test Signal Message. | ||||
| CjuniDsx3FarEndCarrier | 1.3.6.1.4.1.4874.2.2.4.1.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the interface is used in carrier environment. It is sent with MDL messages.
| ||||
| NjuniDs3Conformance | 1.3.6.1.4.1.4874.2.2.4.4 | |||
| NjuniDs3Compliances | 1.3.6.1.4.1.4874.2.2.4.4.1 | |||
| MjuniDs3Compliance | 1.3.6.1.4.1.4874.2.2.4.4.1.1 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for line type and cell scrambler objects.
| ||||
| MjuniDs3Compliance2 | 1.3.6.1.4.1.4874.2.2.4.4.1.2 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for DSU objects.
| ||||
| MjuniDs3Compliance3 | 1.3.6.1.4.1.4874.2.2.4.4.1.3 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for dynamic DS3 interface objects.
| ||||
| MjuniDs3Compliance4 | 1.3.6.1.4.1.4874.2.2.4.4.1.4 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when far end invalid seconds objects and more configuration objects were added.
| ||||
| MjuniDs3Compliance5 | 1.3.6.1.4.1.4874.2.2.4.4.1.5 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for far end generator number, port number and carrier.
| ||||
| MjuniDs3Compliance6 | 1.3.6.1.4.1.4874.2.2.4.4.1.6 | |||
compliance · current The compliance statement for entities which implement the Juniper DS3/E3 MIB.
| ||||
| NjuniDs3Groups | 1.3.6.1.4.1.4874.2.2.4.4.2 | |||
| GjuniDs3Group | 1.3.6.1.4.1.4874.2.2.4.4.2.1 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for line type and cell scrambler objects.
| ||||
| GjuniDs3Group2 | 1.3.6.1.4.1.4874.2.2.4.4.2.2 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for DSU configuration objects. | ||||
| GjuniDs3Group3 | 1.3.6.1.4.1.4874.2.2.4.4.2.3 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for dynamic DS3 interface objects. | ||||
| GjuniDs3Group4 | 1.3.6.1.4.1.4874.2.2.4.4.2.4 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when more configuration objects were added. | ||||
| GjuniDs3Group5 | 1.3.6.1.4.1.4874.2.2.4.4.2.5 | |||
group · current A collection of objects providing management of DS3/E3 interfaces in a Juniper product.
| ||||
| GjuniDs3FarEndGroup | 1.3.6.1.4.1.4874.2.2.4.4.2.6 | obsolete | ||
group · obsolete Obsolete collection of objects providing remote statistics information applicable to DS3 interfaces in a Juniper product. This group became obsolete when remote port number, generator number and carrier objects were added. | ||||
| GjuniDs3FarEndGroup2 | 1.3.6.1.4.1.4874.2.2.4.4.2.7 | |||
group · current A collection of objects providing remote statistics information applicable to DS3 interfaces in a Juniper product. | ||||