MIB Browser
This management information module supports the configuration and
management of SONET linear APS groups.  The definitions and
descriptions used in this mib have been derived from
Synchronous Optical Network (SONET) Transport Systems:
Common Generic Criteria, GR-253-CORE Revision 2, January 1999,
section 5.3. The MIB is also consistent with the Multiplex
Section Protection (MSP) protocol as specified in ITU-T
Recommendation G.783, Characteristics of synchronous digital
hierarchy (SDH) equipment function blocks, Annex A and B.
Organization
IETF AToMMIB Working Group
Root OID
1.3.6.1.4.1.4874.3.2.2.1
Last updated
Objects
73
Source
Show full MIB
snmptranslate -m APS-MIB-JUNI -Tp
snmpwalk -v2c -c <community> -m APS-MIB-JUNI <host> 1.3.6.1.4.1.4874.3.2.2.1

Imports

IF-MIBInterfaceIndex
Juniper-ExperimentjuniSonetApsExperiment
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp

OID tree

NameOIDTypeAccessStatus
IjunidApsMIB1.3.6.1.4.1.4874.3.2.2.1
NjunidApsMIBObjects1.3.6.1.4.1.4874.3.2.2.1.1
NjunidApsConfig1.3.6.1.4.1.4874.3.2.2.1.1.1
SjunidApsConfigGroups1.3.6.1.4.1.4874.3.2.2.1.1.1.1Gauge32RO
TjunidApsConfigTable1.3.6.1.4.1.4874.3.2.2.1.1.1.2NA
RjunidApsConfigEntry1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1NA
CjunidApsConfigName1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.1SnmpAdminString (SIZE (1..32))NA
CjunidApsConfigRowStatus1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.2RowStatusRC
CjunidApsConfigMode1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.3INTEGERRC
CjunidApsConfigRevert1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.4INTEGERRC
CjunidApsConfigDirection1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.5INTEGERRC
CjunidApsConfigExtraTraffic1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.6INTEGERRC
CjunidApsConfigSdBerThreshold1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.7Integer32 (5..9)RC
CjunidApsConfigSfBerThreshold1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.8Integer32 (3..5)RC
CjunidApsConfigWaitToRestore1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.9Integer32 (0..720)RC
CjunidApsConfigCreationTime1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.10TimeStampRO
TjunidApsStatusTable1.3.6.1.4.1.4874.3.2.2.1.1.2NA
RjunidApsStatusEntry1.3.6.1.4.1.4874.3.2.2.1.1.2.1NA
CjunidApsStatusK1K2Rcv1.3.6.1.4.1.4874.3.2.2.1.1.2.1.1JunidApsK1K2RO
CjunidApsStatusK1K2Trans1.3.6.1.4.1.4874.3.2.2.1.1.2.1.2JunidApsK1K2RO
CjunidApsStatusCurrent1.3.6.1.4.1.4874.3.2.2.1.1.2.1.3BitsRO
CjunidApsStatusModeMismatches1.3.6.1.4.1.4874.3.2.2.1.1.2.1.4Counter32RO
CjunidApsStatusChannelMismatches1.3.6.1.4.1.4874.3.2.2.1.1.2.1.5Counter32RO
CjunidApsStatusPSBFs1.3.6.1.4.1.4874.3.2.2.1.1.2.1.6Counter32RO
CjunidApsStatusFEPLFs1.3.6.1.4.1.4874.3.2.2.1.1.2.1.7Counter32RO
CjunidApsStatusSwitchedChannel1.3.6.1.4.1.4874.3.2.2.1.1.2.1.8Integer32RO
NjunidApsMap1.3.6.1.4.1.4874.3.2.2.1.1.3
SjunidApsChanLTEs1.3.6.1.4.1.4874.3.2.2.1.1.3.1Gauge32RO
TjunidApsMapTable1.3.6.1.4.1.4874.3.2.2.1.1.3.2NA
RjunidApsMapEntry1.3.6.1.4.1.4874.3.2.2.1.1.3.2.1NA
CjunidApsMapIfIndex1.3.6.1.4.1.4874.3.2.2.1.1.3.2.1.1InterfaceIndexNA
CjunidApsMapGroupName1.3.6.1.4.1.4874.3.2.2.1.1.3.2.1.2SnmpAdminString (SIZE (0..32))RO
CjunidApsMapChanNumber1.3.6.1.4.1.4874.3.2.2.1.1.3.2.1.3Integer32 (-1..14)RO
TjunidApsChanConfigTable1.3.6.1.4.1.4874.3.2.2.1.1.4NA
RjunidApsChanConfigEntry1.3.6.1.4.1.4874.3.2.2.1.1.4.1NA
CjunidApsChanConfigGroupName1.3.6.1.4.1.4874.3.2.2.1.1.4.1.1SnmpAdminString (SIZE (1..32))NA
CjunidApsChanConfigNumber1.3.6.1.4.1.4874.3.2.2.1.1.4.1.2Integer32 (0..14)NA
CjunidApsChanConfigRowStatus1.3.6.1.4.1.4874.3.2.2.1.1.4.1.3RowStatusRC
CjunidApsChanConfigIfIndex1.3.6.1.4.1.4874.3.2.2.1.1.4.1.4InterfaceIndexRC
CjunidApsChanConfigPriority1.3.6.1.4.1.4874.3.2.2.1.1.4.1.5INTEGERRC
TjunidApsCommandTable1.3.6.1.4.1.4874.3.2.2.1.1.5NA
RjunidApsCommandEntry1.3.6.1.4.1.4874.3.2.2.1.1.5.1NA
CjunidApsCommandSwitch1.3.6.1.4.1.4874.3.2.2.1.1.5.1.1JunidApsSwitchCommandRW
CjunidApsCommandControl1.3.6.1.4.1.4874.3.2.2.1.1.5.1.2JunidApsControlCommandRW
TjunidApsChanStatusTable1.3.6.1.4.1.4874.3.2.2.1.1.6NA
RjunidApsChanStatusEntry1.3.6.1.4.1.4874.3.2.2.1.1.6.1NA
CjunidApsChanStatusCurrent1.3.6.1.4.1.4874.3.2.2.1.1.6.1.1BitsRO
CjunidApsChanStatusSignalDegrades1.3.6.1.4.1.4874.3.2.2.1.1.6.1.2Counter32RO
CjunidApsChanStatusSignalFailures1.3.6.1.4.1.4874.3.2.2.1.1.6.1.3Counter32RO
CjunidApsChanStatusSwitchovers1.3.6.1.4.1.4874.3.2.2.1.1.6.1.4Counter32RO
CjunidApsChanStatusLastSwitchover1.3.6.1.4.1.4874.3.2.2.1.1.6.1.5TimeStampRO
CjunidApsChanStatusSwitchoverSeconds1.3.6.1.4.1.4874.3.2.2.1.1.6.1.6Counter32RO
NjunidApsMIBNotifications1.3.6.1.4.1.4874.3.2.2.1.2
NjunidApsNotificationsPrefix1.3.6.1.4.1.4874.3.2.2.1.2.0
!junidApsEventSwitchover1.3.6.1.4.1.4874.3.2.2.1.2.0.1
!junidApsEventModeMismatch1.3.6.1.4.1.4874.3.2.2.1.2.0.2
!junidApsEventChannelMismatch1.3.6.1.4.1.4874.3.2.2.1.2.0.3
!junidApsEventPSBF1.3.6.1.4.1.4874.3.2.2.1.2.0.4
!junidApsEventFEPLF1.3.6.1.4.1.4874.3.2.2.1.2.0.5
NjunidApsMIBConformance1.3.6.1.4.1.4874.3.2.2.1.3
NjunidApsGroups1.3.6.1.4.1.4874.3.2.2.1.3.1
GjunidApsConfigGeneral1.3.6.1.4.1.4874.3.2.2.1.3.1.1
GjunidApsConfigWtr1.3.6.1.4.1.4874.3.2.2.1.3.1.2
GjunidApsCommandOnePlusOne1.3.6.1.4.1.4874.3.2.2.1.3.1.3
GjunidApsCommandOneToN1.3.6.1.4.1.4874.3.2.2.1.3.1.4
GjunidApsStatusGeneral1.3.6.1.4.1.4874.3.2.2.1.3.1.5
GjunidApsChanGeneral1.3.6.1.4.1.4874.3.2.2.1.3.1.6
GjunidApsChanOneToN1.3.6.1.4.1.4874.3.2.2.1.3.1.7
GjunidApsTotalsGroup1.3.6.1.4.1.4874.3.2.2.1.3.1.8
GjunidApsMapGroup1.3.6.1.4.1.4874.3.2.2.1.3.1.9
GjunidApsEventOptional1.3.6.1.4.1.4874.3.2.2.1.3.1.10
NjunidApsCompliances1.3.6.1.4.1.4874.3.2.2.1.3.2
MjunidApsCompliance1.3.6.1.4.1.4874.3.2.2.1.3.2.1

Textual conventions

JunidApsControlCommand INTEGER

clearLockoutWorkingChannel(3) lockoutWorkingChannel(2) noCmd(1)

An APS control command applies only to LTE that support the
1:n architecture and performs the following actions.

The Control command values are:

noCmd

This value should be returned by a read request when no control
command has been written to the object in question since
initialization. This value may not be used in a write operation.

lockoutWorkingChannel

Prevents the specified working channel from switching to the protection
line.

clearLockoutWorkingChannel

Clears the lockout a working channel command for the channel specified.
JunidApsK1K2 OCTET STRING (SIZE (2))
This Textual Convention describes an object that stores
 a SONET K1 and K2 byte APS protocol field.

K1 is located in the first octet, K2 is located in
the second octet. Bits are numbered from left to right.

Bits 1-4 of the K1 byte indicate a request.

1111  Lockout of Protection
1110  Forced Switch
1101  SF - High Priority
1100  SF - Low Priority
1011  SD - High Priority
1010  SD - Low Priority
1001  not used
1000  Manual Switch
0111  not used
0110  Wait-to-Restore
0101  not used
0100  Exercise
0011  not used
0010  Reverse Request
0001  Do Not Revert
0000  No Request

Bits 5-8 of the K1 byte indicate the channel associated with the
request defined in bits 1-4.

0000 is the Null channel.

1-14 are working channels.
15   is the extra traffic channel

Bits 1-4 of the K2 byte indicate a channel. The channel is
defined with the same syntax as K1 Bits 5-8.

Bit 5 of the K2 byte indicates the
architecture.

0 if the architecture is 1+1
1 if the architecture is 1:n

Bits 6-8 of the K2 byte indicates the
mode.

000 - 011 are reserved for future use

100  indicates the mode is unidirectional
101  indicates the mode is bidirectional

110  RDI-L

111  AIS-L
JunidApsSwitchCommand INTEGER

clear(2) exercise(8) forcedSwitchProtectToWork(5) forcedSwitchWorkToProtect(4) lockoutOfProtection(3) manualSwitchProtectToWork(7) manualSwitchWorkToProtect(6) noCmd(1)

An APS switch command allows a user to perform protection
switch actions.

The Switch command values are:

noCmd

This value should be returned by a read request when no switch
command has been written to the object in question since
initialization. This value may not be used in a write operation.

clear

Clears all of the switch commands listed below for the specified
channel.

lockoutOfProtection

Prevents any of the working channels from switching to the protection
line. The specified channel should be the protection channel.

forcedSwitchWorkToProtect

Switches the specified working channel to the protection line.

forcedSwitchProtectToWork

Switches the working channel back from the protection
line to the working line. The specified channel should be
the protection channel.

manualSwitchWorkToProtect

Switches the specified working channel to the protection line.

manualSwitchProtectToWork

Switches the working channel back from the protection
line to the working line. The specified channel should be
the protection channel.

exercise

Exercises the protocol for a protection switch of the specified
channel by issuing an Exercise request for that channel and
checking the response on the APS channel.