JUNIPER-VPN-MIB
Juniper Networks, Inc.Extended VPN MIB module to support VPN Identifier for locally switched L2 circuits.
snmptranslate -m JUNIPER-VPN-MIB -Tpsnmpwalk -v2c -c <community> -m JUNIPER-VPN-MIB <host> 1.3.6.1.4.1.2636.3.26Imports
| IF-MIB | InterfaceIndexOrZero |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| JUNIPER-SMI | jnxMibs |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjnxVpnMIB | 1.3.6.1.4.1.2636.3.26 | |||
identity Extended VPN MIB module to support VPN Identifier for locally switched L2 circuits. | ||||
| NjnxVpnMIBNotifications | 1.3.6.1.4.1.2636.3.26.0 | |||
| !jnxVpnIfUp | 1.3.6.1.4.1.2636.3.26.0.1 | |||
notification · current A jnxVpnIfUp notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions out of the 'down' state.
| ||||
| !jnxVpnIfDown | 1.3.6.1.4.1.2636.3.26.0.2 | |||
notification · current A jnxVpnIfDown notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions to the 'down' state.
| ||||
| !jnxVpnPwUp | 1.3.6.1.4.1.2636.3.26.0.3 | |||
notification · current A jnxVpnPwUp notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions out of the 'down' state.
| ||||
| !jnxVpnPwDown | 1.3.6.1.4.1.2636.3.26.0.4 | |||
notification · current A jnxVpnPwDown notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions to the 'down' state.
| ||||
| NjnxVpnMibObjects | 1.3.6.1.4.1.2636.3.26.1 | |||
| NjnxVpnInfo | 1.3.6.1.4.1.2636.3.26.1.1 | |||
| SjnxVpnConfiguredVpns | 1.3.6.1.4.1.2636.3.26.1.1.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Number of configured VPNs. | ||||
| SjnxVpnActiveVpns | 1.3.6.1.4.1.2636.3.26.1.1.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Number of active VPNs. | ||||
| SjnxVpnNextIfIndex | 1.3.6.1.4.1.2636.3.26.1.1.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Next free VPN interface index. | ||||
| SjnxVpnNextPwIndex | 1.3.6.1.4.1.2636.3.26.1.1.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Next free Pseudo-Wire index. | ||||
| SjnxVpnNextRTIndex | 1.3.6.1.4.1.2636.3.26.1.1.5 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Next free Route Target index. | ||||
| TjnxVpnTable | 1.3.6.1.4.1.2636.3.26.1.2 | NA | ||
table · not-accessible · current Table of Configured VPNs. | ||||
| RjnxVpnEntry | 1.3.6.1.4.1.2636.3.26.1.2.1 | NA | ||
row · not-accessible · current Entry containing information about a particular VPN.
| ||||
| CjnxVpnType | 1.3.6.1.4.1.2636.3.26.1.2.1.1 | JnxVpnType | NA | |
column · JnxVpnType · not-accessible · current Type of the VPN. | ||||
| CjnxVpnName | 1.3.6.1.4.1.2636.3.26.1.2.1.2 | JnxVpnName | NA | |
column · JnxVpnName · not-accessible · current Name of the VPN. This should ideally be unique in the Service Provider's domain; at a minimum, it MUST be unique per Provider Edge router. | ||||
| CjnxVpnRowStatus | 1.3.6.1.4.1.2636.3.26.1.2.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current This variable is used to create, modify, and/or delete a row in this table. | ||||
| CjnxVpnStorageType | 1.3.6.1.4.1.2636.3.26.1.2.1.4 | StorageType | RO | |
column · StorageType · read-only · current This variable indicates the storage type for this object. | ||||
| CjnxVpnDescription | 1.3.6.1.4.1.2636.3.26.1.2.1.5 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current String describing the VPN. | ||||
| CjnxVpnIdentifierType | 1.3.6.1.4.1.2636.3.26.1.2.1.6 | JnxVpnIdentifierType | RO | |
column · JnxVpnIdentifierType · read-only · current Type of the following JnxVpnIdentifier. | ||||
| CjnxVpnIdentifier | 1.3.6.1.4.1.2636.3.26.1.2.1.7 | JnxVpnIdentifier | RO | |
column · JnxVpnIdentifier · read-only · current In the case of BGP VPNs, this is the Route Distinguisher for the VPN. In the case of LDP VPNs, this is the VC ID for the circuit. A value of all zeros indicates that the neither a Route Distinguisher nor a VC ID is configured for the VPN. | ||||
| CjnxVpnConfiguredSites | 1.3.6.1.4.1.2636.3.26.1.2.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of sites configured in the VPN. Must be set to zero if not applicable. | ||||
| CjnxVpnActiveSites | 1.3.6.1.4.1.2636.3.26.1.2.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of active sites (i.e., sites whose state is active) in the VPN. | ||||
| CjnxVpnLocalAddresses | 1.3.6.1.4.1.2636.3.26.1.2.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of addresses learned from the CE device. | ||||
| CjnxVpnTotalAddresses | 1.3.6.1.4.1.2636.3.26.1.2.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of addresses in the VPN RIB. | ||||
| CjnxVpnAge | 1.3.6.1.4.1.2636.3.26.1.2.1.12 | TimeTicks | RO | |
column · TimeTicks · read-only · current The age (i.e., time from creation till now) of this VPN in hundredths of a second. | ||||
| TjnxVpnIfTable | 1.3.6.1.4.1.2636.3.26.1.3 | NA | ||
table · not-accessible · current Table of VPN Interfaces. | ||||
| RjnxVpnIfEntry | 1.3.6.1.4.1.2636.3.26.1.3.1 | NA | ||
row · not-accessible · current Entry containing information about a particular VPN interface. | ||||
| CjnxVpnIfVpnType | 1.3.6.1.4.1.2636.3.26.1.3.1.1 | JnxVpnType | AN | |
column · JnxVpnType · accessible-for-notify · current Type of the VPN to which this interface belongs. | ||||
| CjnxVpnIfVpnName | 1.3.6.1.4.1.2636.3.26.1.3.1.2 | JnxVpnName | AN | |
column · JnxVpnName · accessible-for-notify · current Name of the VPN to which this interface belongs. | ||||
| CjnxVpnIfIndex | 1.3.6.1.4.1.2636.3.26.1.3.1.3 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The index of this interface in the VPN. Each interface in the VPN is given a unique index. The RowStatus says whether a given interface (i.e., a row in this table) is valid or not. Note: this index MUST NOT be zero. | ||||
| CjnxVpnIfRowStatus | 1.3.6.1.4.1.2636.3.26.1.3.1.4 | RowStatus | RO | |
column · RowStatus · read-only · current This variable is used to create, modify, and/or delete a row in this table. | ||||
| CjnxVpnIfStorageType | 1.3.6.1.4.1.2636.3.26.1.3.1.5 | StorageType | RO | |
column · StorageType · read-only · current This variable indicates the storage type for this object. | ||||
| CjnxVpnIfAssociatedPw | 1.3.6.1.4.1.2636.3.26.1.3.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Index of associated Pseudo-wire, if any, in which case the index MUST be non-zero. If none, then this index MUST be zero. | ||||
| CjnxVpnIfProtocol | 1.3.6.1.4.1.2636.3.26.1.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Protocol running over this VPN interface. The values up to 10 are taken from draft-martini-l2circuit-trans-mpls-08.txt; the value for vpls is taken from draft-lasserre-vkompella-ppvpn-vpls-01.txt. The values from 20-23 are used when the VPN is a Layer 3 VPN.
| ||||
| CjnxVpnIfInBandwidth | 1.3.6.1.4.1.2636.3.26.1.3.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum bandwidth that the CE connected over this VPN i/f can send to the PE, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum. | ||||
| CjnxVpnIfOutBandwidth | 1.3.6.1.4.1.2636.3.26.1.3.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum bandwidth that the PE can send to the CE over this VPN interface, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum. | ||||
| CjnxVpnIfStatus | 1.3.6.1.4.1.2636.3.26.1.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Status of this interface.
| ||||
| TjnxVpnPwTable | 1.3.6.1.4.1.2636.3.26.1.4 | NA | ||
table · not-accessible · current Table of Pseudo-Wire Connections. | ||||
| RjnxVpnPwEntry | 1.3.6.1.4.1.2636.3.26.1.4.1 | NA | ||
row · not-accessible · current Entry containing information about a particular VPN. | ||||
| CjnxVpnPwVpnType | 1.3.6.1.4.1.2636.3.26.1.4.1.1 | JnxVpnType | AN | |
column · JnxVpnType · accessible-for-notify · current The type of the VPN to which this Pseudo-Wire belongs. | ||||
| CjnxVpnPwVpnName | 1.3.6.1.4.1.2636.3.26.1.4.1.2 | JnxVpnName | AN | |
column · JnxVpnName · accessible-for-notify · current The name of the VPN to which this Pseudo-Wire belongs. | ||||
| CjnxVpnPwIndex | 1.3.6.1.4.1.2636.3.26.1.4.1.3 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The index of this Pseudo-Wire in the VPN. Each Pseudo Wire in the VPN is given a unique index. The RowStatus says whether a given Pseudo Wire (i.e., a row in this table) is valid or not. Note: this index MUST NOT be zero. | ||||
| CjnxVpnPwRowStatus | 1.3.6.1.4.1.2636.3.26.1.4.1.4 | RowStatus | RO | |
column · RowStatus · read-only · current This variable is used to create, modify, and/or delete a row in this table. | ||||
| CjnxVpnPwStorageType | 1.3.6.1.4.1.2636.3.26.1.4.1.5 | StorageType | RO | |
column · StorageType · read-only · current This variable indicates the storage type for this object. | ||||
| CjnxVpnPwAssociatedInterface | 1.3.6.1.4.1.2636.3.26.1.4.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The VPN index of the interface associated with this Pseudo Wire, if any. If there is no interface associated with this Pseudo Wire, a value of zero is to be returned. | ||||
| CjnxVpnPwLocalSiteId | 1.3.6.1.4.1.2636.3.26.1.4.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The local site identifier for this Pseudo-Wire. If there is no local site identifier, a value of zero is to be returned. | ||||
| CjnxVpnPwRemoteSiteId | 1.3.6.1.4.1.2636.3.26.1.4.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The remote site (i.e., the site at the other end of this Pseudo-Wire) identifier. If there is no remote site identifier, a value of zero is to be returned. | ||||
| CjnxVpnRemotePeIdAddrType | 1.3.6.1.4.1.2636.3.26.1.4.1.9 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of address assigned to the remote PE. | ||||
| CjnxVpnRemotePeIdAddress | 1.3.6.1.4.1.2636.3.26.1.4.1.10 | InetAddress | RO | |
column · InetAddress · read-only · current The address of the remote PE, i.e., the router at the other end of the Pseudo-Wire. | ||||
| CjnxVpnPwTunnelType | 1.3.6.1.4.1.2636.3.26.1.4.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the tunnel over which the Pseudo-Wire is carried. If several Pseudo-Wires can be carried in one tunnel, each Pseudo-Wire is identified by the multiplexor/ demultiplexor within this tunnel.
| ||||
| CjnxVpnPwTunnelName | 1.3.6.1.4.1.2636.3.26.1.4.1.12 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current The name of the Tunnel over which this Pseudo-Wire is carried, if any. | ||||
| CjnxVpnPwReceiveDemux | 1.3.6.1.4.1.2636.3.26.1.4.1.13 | JnxVpnMultiplexor | RO | |
column · JnxVpnMultiplexor · read-only · current The value of the demultiplexor that identifies received packets as belonging to this Pseudo-Wire, if any. | ||||
| CjnxVpnPwTransmitDemux | 1.3.6.1.4.1.2636.3.26.1.4.1.14 | JnxVpnMultiplexor | RO | |
column · JnxVpnMultiplexor · read-only · current The value of the demultiplexor that identifies transmitted packets as belonging to this Pseudo-Wire, if any. | ||||
| CjnxVpnPwStatus | 1.3.6.1.4.1.2636.3.26.1.4.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the Pseudo-Wire.
| ||||
| CjnxVpnPwTunnelStatus | 1.3.6.1.4.1.2636.3.26.1.4.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the PE-to-PE tunnel over which the Pseudo- Wire is carried.
| ||||
| CjnxVpnPwRemoteSiteStatus | 1.3.6.1.4.1.2636.3.26.1.4.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the interface at the remote end of the Pseudo-Wire.
| ||||
| CjnxVpnPwTimeUp | 1.3.6.1.4.1.2636.3.26.1.4.1.18 | TimeTicks | RO | |
column · TimeTicks · read-only · current The total time in hundredths of a second that this Pseudo-Wire has been operational. | ||||
| CjnxVpnPwTransitions | 1.3.6.1.4.1.2636.3.26.1.4.1.19 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of state transitions (up -> down and down -> up) this Tunnel has undergone. | ||||
| CjnxVpnPwLastTransition | 1.3.6.1.4.1.2636.3.26.1.4.1.20 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time in hundredths of a second since the last transition occurred on this Tunnel. | ||||
| CjnxVpnPwPacketsSent | 1.3.6.1.4.1.2636.3.26.1.4.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets that have been sent over this Pseudo-Wire. | ||||
| CjnxVpnPwOctetsSent | 1.3.6.1.4.1.2636.3.26.1.4.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The number of octets that have been sent over this Pseudo-Wire. | ||||
| CjnxVpnPwPacketsReceived | 1.3.6.1.4.1.2636.3.26.1.4.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets that have been received over this Pseudo-Wire. | ||||
| CjnxVpnPwOctetsReceived | 1.3.6.1.4.1.2636.3.26.1.4.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The number of octets that have been received over this Pseudo-Wire. | ||||
| CjnxVpnPwLRPacketsSent | 1.3.6.1.4.1.2636.3.26.1.4.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets that have been sent over this Pseudo-Wire. | ||||
| CjnxVpnPwLROctetsSent | 1.3.6.1.4.1.2636.3.26.1.4.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current The number of octets that have been sent over this Pseudo-Wire. | ||||
| CjnxVpnPwLRPacketsReceived | 1.3.6.1.4.1.2636.3.26.1.4.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets that have been received over this Pseudo-Wire. | ||||
| CjnxVpnPwLROctetsReceived | 1.3.6.1.4.1.2636.3.26.1.4.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current The number of octets that have been received over this Pseudo-Wire. | ||||
| TjnxVpnRTTable | 1.3.6.1.4.1.2636.3.26.1.5 | NA | ||
table · not-accessible · current Table of Route Targets for a VPN. | ||||
| RjnxVpnRTEntry | 1.3.6.1.4.1.2636.3.26.1.5.1 | NA | ||
row · not-accessible · current Entry containing information about a particular VPN. | ||||
| CjnxVpnRTVpnType | 1.3.6.1.4.1.2636.3.26.1.5.1.1 | JnxVpnType | NA | |
column · JnxVpnType · not-accessible · current The type of the VPN for which this list of Route Targets are defined. | ||||
| CjnxVpnRTVpnName | 1.3.6.1.4.1.2636.3.26.1.5.1.2 | JnxVpnName | NA | |
column · JnxVpnName · not-accessible · current The name of the VPN for which this list of Route Targets are defined. | ||||
| CjnxVpnRTIndex | 1.3.6.1.4.1.2636.3.26.1.5.1.3 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The index within the list of Route Targets that specifies individual Route Targets that define the VPN. Note: this index MUST NOT be zero. | ||||
| CjnxVpnRTRowStatus | 1.3.6.1.4.1.2636.3.26.1.5.1.4 | RowStatus | RO | |
column · RowStatus · read-only · current This variable is used to create, modify, and/or delete a row in this table. | ||||
| CjnxVpnRTStorageType | 1.3.6.1.4.1.2636.3.26.1.5.1.5 | StorageType | RO | |
column · StorageType · read-only · current This variable indicates the storage type for this object. | ||||
| CjnxVpnRTType | 1.3.6.1.4.1.2636.3.26.1.5.1.6 | JnxVpnIdentifierType | RO | |
column · JnxVpnIdentifierType · read-only · current Type of the following Route Target. This can one of 'routeTarget[012]' or 'none'. | ||||
| CjnxVpnRT | 1.3.6.1.4.1.2636.3.26.1.5.1.7 | JnxVpnIdentifier | RO | |
column · JnxVpnIdentifier · read-only · current Route Target for the VPN. If the jnxVpnRTType is 'none', this value should be all zeros. | ||||
| CjnxVpnRTFunction | 1.3.6.1.4.1.2636.3.26.1.5.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The route target export distribution type.
| ||||
| NjnxVpnMIBConformance | 1.3.6.1.4.1.2636.3.26.2 | |||
Textual conventions
JnxVpnIdentifierOCTET STRING (SIZE (0..256))Syntax for a VPN identifier. A VPN Identifier is always interpreted within the context of an jnxVpnIdentifierType value. The jnxVpnIdentifierType object which defines the context must be registered immediately before the object which uses the VpnIdentifier textual convention. In other words, the object identifiers for the jnxVpnIdentifierType object and the jnxVpnIdentifier object MUST have the same length and the last sub-identifier of the jnxVpnIdentifierType object MUST be 1 less than the last sub-identifier of the jnxVpnIdentifier object.
JnxVpnIdentifierTypeINTEGERlocalSwitch(11)none(0)other(1)routeDistinguisher(2)routeDistinguisher0(3)routeDistinguisher1(4)routeDistinguisher2(5)routeTarget(6)routeTarget0(7)routeTarget1(8)routeTarget2(9)vcId(10)Type of the VPN Identifier. This includes Route Distinguishers, Route Targets, and VC IDs. none(0) This value MUST be used if the value of the corresponding JnxVpnIdentifier object is a zero-length string. other(1) A VPN identifier that does not match one of the types defined in this MIB. routeDistinguisher(2) A VPN identifier as defined by the JnxVpnRouteDistinguisher textual convention. routeDistinguisher0(3) A VPN identifier as defined by the JnxVpnRouteDistinguisher0 textual convention. routeDistinguisher1(4) A VPN identifier as defined by the JnxVpnRouteDistinguisher1 textual convention. routeDistinguisher2(5) A VPN identifier as defined by the JnxVpnRouteDistinguisher2 textual convention. routeTarget(6) A VPN identifier as defined by the JnxVpnRouteTarget textual convention. routeTarget0(7) A VPN identifier as defined by the JnxVpnRouteTarget0 textual convention. routeTarget1(8) A VPN identifier as defined by the JnxVpnRouteTarget1 textual convention. routeTarget2(9) A VPN identifier as defined by the JnxVpnRouteTarget2 textual convention. vcId(10) A VPN identifier as defined by the JnxVpnVCIdentifier textual convention. localSwitch(11) A VPN identifier as defined by the JnxVpnLocalSwitchIdentifier textual convention.JnxVpnLocalSwitchIdentifierOCTET STRING (SIZE (1..256))The string representing the name of two interfaces that are being locally switched separated by a colon.
JnxVpnMultiplexorUnsigned32Syntax for a VPN multiplexor/demultiplexor within a Pseudo-Wire Tunnel.
JnxVpnNameOCTET STRING (SIZE (1..128))Name of the VPN.
JnxVpnRouteDistinguisherOCTET STRING (SIZE (8))Display hint:
1x:1x:1x:1x:1x:1x:1x:1xRepresents a Generic Route Distinguisher.
JnxVpnRouteDistinguisher0OCTET STRING (SIZE (8))Display hint:
2x-2d:4dRepresents a Type 0 Route Distinguisher.
JnxVpnRouteDistinguisher1OCTET STRING (SIZE (8))Display hint:
2x-1d.1d.1d.1d:2dRepresents a Type 1 Route Distinguisher.
JnxVpnRouteDistinguisher2OCTET STRING (SIZE (8))Display hint:
2x-4d:2dRepresents a Type 2 Route Distinguisher.
JnxVpnRouteTargetOCTET STRING (SIZE (8))Display hint:
1x:1x:1x:1x:1x:1x:1x:1xRepresents a Generic Route Target.
JnxVpnRouteTarget0OCTET STRING (SIZE (8))Display hint:
2x-4d:2dRepresents a Type 00 Route Target.
JnxVpnRouteTarget1OCTET STRING (SIZE (8))Display hint:
2x-1d.1d.1d.1d:2dRepresents a Type 01 Route Target.
JnxVpnRouteTarget2OCTET STRING (SIZE (8))Display hint:
2x-2d:4dRepresents a Type 02 Route Target.
JnxVpnTypeINTEGERbgpAtmVpn(10)bgpIpVpn(2)bgpL2Vpn(3)bgpVpls(4)ccc(9)l2Circuit(5)ldpVpls(6)opticalVpn(7)other(1)vpOxc(8)Type of the VPN. The following types have been defined: bgpIpVpn: RFC 4364 VPNs; bgpL2Vpn: BGP-based Layer 2 VPNs (see draft-kompella-ppvpn-l2vpn); bgpVpls: BGP-based VPLS (see draft-kompella-ppvnp-vpls); l2Circuit: LDP-based point-to-point Layer 2 circuits (see RFC 4906); ldpVpls: LDP-based VPLS (see draft-lasserre-vkompella-ppvpn-vpls); opticalVpn: BGP-based Optical (port based) VPNs (see draft-ouldbrahim-bgpgmpls-ovpn); vpOxc: Virtual Private Optical Cross-Connect (see draft-ouldbrahim-ppvpn-vpoxc); ccc: proprietary Layer 2 circuit; bgpAtmVpn: ATM over MPLS (draft to be published).JnxVpnVCIdentifierOCTET STRING (SIZE (8))Display hint:
1d.1d.1d.1d:4dRepresents a PE ID, VC ID pair. The PE ID is the Router ID of the remote PE. The VC ID follows the description given in draft-martini-l2circuit-trans.
Traps / Notifications
- jnxVpnIfDown
1.3.6.1.4.1.2636.3.26.0.2 - jnxVpnIfUp
1.3.6.1.4.1.2636.3.26.0.1 - jnxVpnPwDown
1.3.6.1.4.1.2636.3.26.0.4 - jnxVpnPwUp
1.3.6.1.4.1.2636.3.26.0.3