JUNIPER-POWER-SUPPLY-UNIT-MIB
Juniper Networks, Inc.The Juniper Supply Unit MIB definitions for enabling power monitoring and management of a juniper device.
snmptranslate -m JUNIPER-POWER-SUPPLY-UNIT-MIB -Tpsnmpwalk -v2c -c <community> -m JUNIPER-POWER-SUPPLY-UNIT-MIB <host> 1.3.6.1.4.1.2636.3.58.1Imports
| JUNIPER-MIB | jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index |
|---|---|
| JUNIPER-SMI | jnxPsuMIBRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjnxPsuMIB | 1.3.6.1.4.1.2636.3.58.1 | |||
identity The Juniper Supply Unit MIB definitions for enabling power monitoring and management of a juniper device. | ||||
| NjnxPsuNotifications | 1.3.6.1.4.1.2636.3.58.1.1 | |||
| NjnxPsuObjects | 1.3.6.1.4.1.2636.3.58.1.2 | |||
| NjnxPsuScalars | 1.3.6.1.4.1.2636.3.58.1.2.1 | |||
| SjnxPsuAvailableDeviceCount | 1.3.6.1.4.1.2636.3.58.1.2.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Gives the number of PSU units available online in the System. | ||||
| SjnxPsuAvailableAveragePowerSupply | 1.3.6.1.4.1.2636.3.58.1.2.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Gives the total average power that the System can supply from the available online units in Watts. | ||||
| SjnxPsuAvailableMaxPowerSupply | 1.3.6.1.4.1.2636.3.58.1.2.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Gives the total maximum power that the System can supply from the available online units in Watts. | ||||
| SjnxPsuRedundancy | 1.3.6.1.4.1.2636.3.58.1.2.1.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current PSU power redundancy configuration.
| ||||
| SjnxPsuChassisPowerReserved | 1.3.6.1.4.1.2636.3.58.1.2.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Power reserved for Chassis in Watts. | ||||
| SjnxPsuChassisPowerAllocated | 1.3.6.1.4.1.2636.3.58.1.2.1.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Total power allocated for chassis and all the FPCs in Watts. | ||||
| SjnxPsuRedundantPowerAvailable | 1.3.6.1.4.1.2636.3.58.1.2.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Power(in Watts) that is still available for allocation even while supporting redundancy with the present usage. | ||||
| SjnxPsuTotalPowerAvailable | 1.3.6.1.4.1.2636.3.58.1.2.1.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Power(in Watts) which could be made available for further allocation without supporting any redundancy with the present usage. | ||||
| SjnxPsuChassisPowerConsumed | 1.3.6.1.4.1.2636.3.58.1.2.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Total power consumed by the entire system rounded to the nearest integer. This is calculated using the PowerFactor, Current and Voltage values of each PSU that is online and connected to the System. | ||||
| SjnxPsuTemperatureInflow | 1.3.6.1.4.1.2636.3.58.1.2.1.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current Average inflow temperature calculated from all the available input sensors on the master RE. | ||||
| SjnxPsuTemperatureOutflow | 1.3.6.1.4.1.2636.3.58.1.2.1.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Average outflow temperature calculated from all the available output sensors on the master RE. | ||||
| SjnxPsuTemperatureInflowSamples | 1.3.6.1.4.1.2636.3.58.1.2.1.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current The number of samples being taken while calculating jnxPsuTemperatureInflow. | ||||
| SjnxPsuTemperatureOutflowSamples | 1.3.6.1.4.1.2636.3.58.1.2.1.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current The number of samples being taken while calculating jnxPsuTemperatureOutflow. | ||||
| TjnxPsuTable | 1.3.6.1.4.1.2636.3.58.1.2.2 | NA | ||
table · not-accessible · current A list of power entries for each PSU component. | ||||
| RjnxPsuEntry | 1.3.6.1.4.1.2636.3.58.1.2.2.1 | NA | ||
row · not-accessible · current Defines an entry in jnxPsuTable. | ||||
| CjnxPsuAvgPower | 1.3.6.1.4.1.2636.3.58.1.2.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Buffer that contains the average power used, in Watts for each component. | ||||
| CjnxPsuMaxPower | 1.3.6.1.4.1.2636.3.58.1.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Buffer that contains the max power available, in Watts for each component. | ||||
| CjnxPsuMode | 1.3.6.1.4.1.2636.3.58.1.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Mode for each PSU component.
| ||||
| CjnxPsuOutletCount | 1.3.6.1.4.1.2636.3.58.1.2.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The number of outlets (regardless of their current state) present on this psu component, default is 0. | ||||
| TjnxPsuEnvironmentTable | 1.3.6.1.4.1.2636.3.58.1.2.3 | NA | ||
table · not-accessible · current A list of PSU Environment entries. | ||||
| RjnxPsuEnvironmentEntry | 1.3.6.1.4.1.2636.3.58.1.2.3.1 | NA | ||
row · not-accessible · current Defines an entry in jnxPsuEnvironmentTable. | ||||
| CjnxPsuThermalValue | 1.3.6.1.4.1.2636.3.58.1.2.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Temparature at each component in degrees Celsius rounded to the nearest integer. | ||||
| CjnxPsuHumidityValue | 1.3.6.1.4.1.2636.3.58.1.2.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Humidity at each component in percentage. | ||||
| TjnxPsuOutletTable | 1.3.6.1.4.1.2636.3.58.1.2.4 | NA | ||
table · not-accessible · current Gives details of each Power outlet`s state, capacity to supply power, and other details. | ||||
| RjnxPsuOutletEntry | 1.3.6.1.4.1.2636.3.58.1.2.4.1 | NA | ||
row · not-accessible · current A value contained within the OutletEntry | ||||
| CjnxPsuOutletName | 1.3.6.1.4.1.2636.3.58.1.2.4.1.1 | DisplayString (SIZE (0..15)) | RO | |
column · DisplayString (SIZE (0..15)) · read-only · current Outlet name associated to the power supply unit for each PSU Component. | ||||
| CjnxPsuOutletDescription | 1.3.6.1.4.1.2636.3.58.1.2.4.1.2 | DisplayString (SIZE (0..63)) | RO | |
column · DisplayString (SIZE (0..63)) · read-only · current Outlet description associated to the power supply unit for each PSU Component. | ||||
| CjnxPsuOutletAvgPower | 1.3.6.1.4.1.2636.3.58.1.2.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Buffer that contains the average power used, in Watts for each component. | ||||
| CjnxPsuOutletMaxPower | 1.3.6.1.4.1.2636.3.58.1.2.4.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Buffer that contains the maximum power available, in Watts for each component. | ||||
| CjnxPsuOutletCurrent | 1.3.6.1.4.1.2636.3.58.1.2.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current PSU output current in milliamps rounded to the nearest integer. | ||||
| CjnxPsuOutletStatus | 1.3.6.1.4.1.2636.3.58.1.2.4.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The value of the operational status for the given outlet. This can also be used to set the outlet state
| ||||
| CjnxPsuOutletVoltage | 1.3.6.1.4.1.2636.3.58.1.2.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Output voltage in Volts rounded to the nearest integer. | ||||
| CjnxPsuOutletPowerFactorValue | 1.3.6.1.4.1.2636.3.58.1.2.4.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Power factor percentage of each PSU (2k/3k). Algorithm for calculation of Power Factor is below. For PowerOut values that fall in between 618.93W and 915.24W, say 700W, the appropriate PF ranges from 0.910191 & 0.917994. Following linear equation could help deduce a fairly accurate input power value. Linear equation y = mx + b (where m is the slope and b is the Y intercept) Slope m = (y2 - y1) / (x2 - x1) Y intercept b = y - mx Plugging it all together for our example: m = (915.24 - 618.93) / (0.917994 - 0.910191) = 37973.86 b = 915.24 - (37973.86 * 0.917994) = -33944.5 for 700W (y), our efficiency (x) would then be: x = (700 - (-33944.5)) / 37973.86 = 0.912326 = 91% PowerIn = 700W /0.912326 = 767.26W | ||||
| CjnxPsuOutletPowerConsumed | 1.3.6.1.4.1.2636.3.58.1.2.4.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Power Consumed by each outlet units in Watts. | ||||
| TjnxPsuFpcPowerTable | 1.3.6.1.4.1.2636.3.58.1.2.5 | NA | ||
table · not-accessible · current A list of entries for each FPC(Flexible PIC Concentrator) giving it's assigned priority and power being allocated. More information on FPCs can be found in JUNIPER-MIB. | ||||
| RjnxPsuFpcPowerEntry | 1.3.6.1.4.1.2636.3.58.1.2.5.1 | NA | ||
row · not-accessible · current A value contained within the FpcPowerEntry | ||||
| CjnxPsuFpcPowerPriority | 1.3.6.1.4.1.2636.3.58.1.2.5.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The Power budget priority assigned to the FPC. Lower number means higher priority. | ||||
| CjnxPsuFpcPowerAllocated | 1.3.6.1.4.1.2636.3.58.1.2.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The Power allocated to the FPC in Watts. | ||||