JUNIPER-L2CP-FEATURES-MIB
Juniper Networks, Inc.This mib module is for Juniper Networks Proprietory Layer 2 control protocol (L2CP) features
snmptranslate -m JUNIPER-L2CP-FEATURES-MIB -Tpsnmpwalk -v2c -c <community> -m JUNIPER-L2CP-FEATURES-MIB <host> 1.3.6.1.4.1.2636.3.53.1Imports
| BRIDGE-MIB | dot1dStpPort, dot1dStpPortEntry |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| JUNIPER-SMI | jnxL2cpMibRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjnxL2cpFeaturesMIB | 1.3.6.1.4.1.2636.3.53.1 | |||
identity This mib module is for Juniper Networks Proprietory Layer 2 control protocol (L2CP) features | ||||
| NjnxL2cpObjects | 1.3.6.1.4.1.2636.3.53.1.1 | |||
| NjnxL2cpStpProtectObjects | 1.3.6.1.4.1.2636.3.53.1.1.1 | |||
| TjnxDot1dStpPortProtectTable | 1.3.6.1.4.1.2636.3.53.1.1.1.1 | NA | ||
table · not-accessible · current Defines the jnxDot1dStp Port Table for providing enterprise specific extensions for Root Protect and Loop Protect to the corresponding dot1dStpPortTable entry. | ||||
| RjnxDot1dStpPortProtectEntry | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1 | NA | ||
row · not-accessible · current Defines an entry in the jnxDot1dStpPortProtectTable. This essentially augments the dot1dStpPortTable with additional objects.
| ||||
| CjnxDot1dStpPortRootProtectEnabled | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port, even it has the best spanning tree priority vector. This parameter should be FALSE by default. | ||||
| CjnxDot1dStpPortRootProtectState | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the port was prevented from being a root port. This parameter will always return 'no-error (0)' if jnxDot1dStpPortRootProtectEnabled is FALSE.
| ||||
| CjnxDot1dStpPortLoopProtectEnabled | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port when the received superior BPDU is aged out. This parameter should be FALSE by default. | ||||
| CjnxDot1dStpPortLoopProtectState | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether a potential Loop was prevented on the port This parameter will always return 'no-error (0)' if jnxDot1dStpPortLoopProtectEnabled is FALSE.
| ||||
| NjnxL2cpBpduProtectObjects | 1.3.6.1.4.1.2636.3.53.1.1.2 | |||
| TjnxL2cpBpduProtectPortTable | 1.3.6.1.4.1.2636.3.53.1.1.2.1 | NA | ||
table · not-accessible · current Defines a Port Table for BPDU Protect information. This contains only those ports on which BPDU Protect can be configured. | ||||
| RjnxL2cpBpduProtectPortEntry | 1.3.6.1.4.1.2636.3.53.1.1.2.1.1 | NA | ||
row · not-accessible · current Defines an entry in the jnxL2cpBpduProtectPortTable. A list containing BPDU Protect information for each Port.
| ||||
| CjnxL2cpBpduProtectPortEnabled | 1.3.6.1.4.1.2636.3.53.1.1.2.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current A Boolean value set by management indicating whether BPDU protect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a BPDU. This parameter should be FALSE by default. | ||||
| CjnxL2cpPortBpduError | 1.3.6.1.4.1.2636.3.53.1.1.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether a BPDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpBpduProtectPortEnabled is FALSE.
| ||||
| SjnxL2cpBpduProtectDisableTimeout | 1.3.6.1.4.1.2636.3.53.1.1.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Returns the value of time (in seconds) after which a port on which BPDU error was detected will be re-enabled. A returned value of 0 indicates that port will not be re-enabled automatically. | ||||
| NjnxLacpNotifyVars | 1.3.6.1.4.1.2636.3.53.1.1.3 | |||
| SjnxLacpInterfaceName | 1.3.6.1.4.1.2636.3.53.1.1.3.1 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Lacp member interface. | ||||
| SjnxLacpifIndex | 1.3.6.1.4.1.2636.3.53.1.1.3.2 | InterfaceIndex | AN | |
scalar · InterfaceIndex · accessible-for-notify · current Snmp ifIndex of member interface. | ||||
| SjnxLacpAggregateInterfaceName | 1.3.6.1.4.1.2636.3.53.1.1.3.3 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Lacp Aggregate interface. | ||||
| SjnxLacpAggregateifIndex | 1.3.6.1.4.1.2636.3.53.1.1.3.4 | InterfaceIndex | AN | |
scalar · InterfaceIndex · accessible-for-notify · current Snmp ifIndex of Aggregator. | ||||
| SjnxLacpAggPortActorOperState | 1.3.6.1.4.1.2636.3.53.1.1.3.5 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Port actor operational state. | ||||
| NjnxLacpAggTimeout | 1.3.6.1.4.1.2636.3.53.1.1.4 | |||
| Tdot3adAggPortTimeoutTable | 1.3.6.1.4.1.2636.3.53.1.1.4.1 | NA | ||
table · not-accessible · current A table that contains Link Aggregation Timeout information about a port that is associated with this device. A row appears in this table for each physical port. | ||||
| Rdot3adAggPortTimeoutEntry | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1 | NA | ||
row · not-accessible · current A list of Link Aggregation Control Protocol timeout information for a port on this device.
| ||||
| Cdot3adInterfaceName | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current Physical port that is associated with Aggregation Port. This value is read-only. | ||||
| Cdot3adOperState | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.2 | LacpState | RO | |
column · LacpState · read-only · current A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only. | ||||
| Cdot3adAggname | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Aggregation Port where Physical port is associated with. This value is read-only. | ||||
| Cdot3adInterfaceTimeout | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.4 | TimeTicks | RO | |
column · TimeTicks · read-only · current This object represents the time elapsed in seconds since lacp experienced timeout. This value is read-only. | ||||
| NjnxL2cpLoopDetectObjects | 1.3.6.1.4.1.2636.3.53.1.1.5 | |||
| TjnxL2cpLoopDetectPortTable | 1.3.6.1.4.1.2636.3.53.1.1.5.1 | NA | ||
table · not-accessible · current Defines a Port Table for Loop Detect information. This contains only those ports on which Loop Detect is configured. | ||||
| RjnxL2cpLoopDetectPortEntry | 1.3.6.1.4.1.2636.3.53.1.1.5.1.1 | NA | ||
row · not-accessible · current Defines an entry in the jnxL2cpLoopDetectPortTable. A list containing Loop Detect information for each Port.
| ||||
| CjnxL2cpLoopDetectPortEnabled | 1.3.6.1.4.1.2636.3.53.1.1.5.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current A Boolean value set by management indicating whether Loop Detect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a Loop Detect PDU. This parameter should be FALSE by default. | ||||
| CjnxL2cpLoopDetectPduError | 1.3.6.1.4.1.2636.3.53.1.1.5.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether a Loop Detect PDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpLoopDetectPortEnabled is FALSE.
| ||||
| NjnxL2cpNotifications | 1.3.6.1.4.1.2636.3.53.1.2 | |||
| NjnxL2cpProtectTraps | 1.3.6.1.4.1.2636.3.53.1.2.0 | |||
| !jnxPortRootProtectStateChangeTrap | 1.3.6.1.4.1.2636.3.53.1.2.0.1 | |||
notification · current Generated when the ports Root-protect state (no-error or root-prevented) changes. | ||||
| !jnxPortLoopProtectStateChangeTrap | 1.3.6.1.4.1.2636.3.53.1.2.0.2 | |||
notification · current Generated when the ports Loop-protect state (no-error or loop-prevented) changes. | ||||
| !jnxPortBpduErrorStatusChangeTrap | 1.3.6.1.4.1.2636.3.53.1.2.0.3 | |||
notification · current Generated when the ports BPDU error state (no-error or detected) changes.
| ||||
| NjnxLacpNotificationsPrefix | 1.3.6.1.4.1.2636.3.53.1.2.1 | |||
| !jnxLacpTimeOut | 1.3.6.1.4.1.2636.3.53.1.2.1.1 | |||
notification · current Lacp times out | ||||
Textual conventions
LacpStateBitsaggregation(2)collecting(4)defaulted(6)distributing(5)expired(7)lacpActivity(0)lacpTimeout(1)synchronization(3)The Actor and Partner State values from the LACPDU.
Traps / Notifications
- jnxLacpTimeOut
1.3.6.1.4.1.2636.3.53.1.2.1.1 - jnxPortBpduErrorStatusChangeTrap
1.3.6.1.4.1.2636.3.53.1.2.0.3 - jnxPortLoopProtectStateChangeTrap
1.3.6.1.4.1.2636.3.53.1.2.0.2 - jnxPortRootProtectStateChangeTrap
1.3.6.1.4.1.2636.3.53.1.2.0.1