JUNIPER-JS-POLICY-MIB
Juniper Networks, Inc.This module defines the mib for policy monitoring. A security policy, which can be configured from the user interface controls the traffic flow from one zone to another zone by defining the kind(s) of traffic permitted from specified IP sources to specified IP destinations at scheduled times. Juniper security device enforce the security policies rules for the transit traffic in terms of which traffic can pass through the firewall, and the actions taken on the traffic as it passes through the firewall.
snmptranslate -m JUNIPER-JS-POLICY-MIB -Tpsnmpwalk -v2c -c <community> -m JUNIPER-JS-POLICY-MIB <host> 1.3.6.1.4.1.2636.3.39.1.4.1Imports
| JUNIPER-JS-SMI | jnxJsPolicies |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjnxJsSecPolicyMIB | 1.3.6.1.4.1.2636.3.39.1.4.1 | |||
identity This module defines the mib for policy monitoring. A security policy, which can be configured from the user interface controls the traffic flow from one zone to another zone by defining the kind(s) of traffic permitted from specified IP sources to specified IP destinations at scheduled times. Juniper security device enforce the security policies rules for the transit traffic in terms of which traffic can pass through the firewall, and the actions taken on the traffic as it passes through the firewall. | ||||
| NjnxJsPolicyNotifications | 1.3.6.1.4.1.2636.3.39.1.4.1.0 | |||
| NjnxJsPolicyObjects | 1.3.6.1.4.1.2636.3.39.1.4.1.1 | |||
| SjnxJsPolicyNumber | 1.3.6.1.4.1.2636.3.39.1.4.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of policies (regardless of their current state) present on this system. | ||||
| TjnxJsPolicyTable | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2 | NA | ||
table · not-accessible · current The table exposes the security policy entries. Security devices/routers provide a network boundary with a single point of entry and exit point, which allows the screening and directing of traffic through the implementation of access policies. The access policies can permit, deny, encrypt, authenticate, prioirtize, schedule and monitor the traffic flow through the firewall. This table lists entries of policy. The number of policies are given by jnxJsPolicyNumber. | ||||
| RjnxJsPolicyEntry | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1 | NA | ||
row · not-accessible · current An entry contains a security policy. The security policies are configured under from-zone, to-zone direction. Under a specific zone direction, each security policy contains name, match-criteria, action, and other options. | ||||
| CjnxJsPolicyFromZone | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.1 | DisplayString (SIZE (0..63)) | NA | |
column · DisplayString (SIZE (0..63)) · not-accessible · current The attribute displays the from zone name. | ||||
| CjnxJsPolicyToZone | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.2 | DisplayString (SIZE (0..63)) | NA | |
column · DisplayString (SIZE (0..63)) · not-accessible · current The attribute exposes the to-zone name. | ||||
| CjnxJsPolicyName | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.3 | DisplayString (SIZE (0..63)) | NA | |
column · DisplayString (SIZE (0..63)) · not-accessible · current The name of the policy defined. It consists of up to 256 ascii characters and uniquely identifies the policy entry. | ||||
| CjnxJsPolicySequenceNumber | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The attribute indicates the policy sequence order of the policy within a specific from-zone and to-zone pair. Policies are matched in a sequence where the ordering is specified by this number. | ||||
| CjnxJsPolicyAction | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The attribute indicates the actions performed when the criteria is matched. The action permit, deny and reject are used configured policies.
| ||||
| CjnxJsPolicyScheduler | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.6 | DisplayString (SIZE (0..63)) | RO | |
column · DisplayString (SIZE (0..63)) · read-only · current The name of the schedule attached to this policy. Certain schedule has a specified duration and this may effect the status of the policy. | ||||
| CjnxJsPolicyState | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The state of this policy: active, inactive, or unavailable. The state can be effected by the scheduler if the scheduler has a specified duration.
| ||||
| CjnxJsPolicyStatsAvailability | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The statistics availability of this policy. The attribute indicates whether the statistics counters are available and are actively updated. If available, there would exists a matching jnxJsPolicyStatsEntry for the policy.
| ||||
| CjnxJsPolicyPerSecBytesThreshold | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The attribute indicates the threshold value of bytes per second. | ||||
| CjnxJsPolicyPerMinKbytesThreshold | 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The attribute indicates the threshold value of kbyte per min. | ||||
| TjnxJsPolicyStatsTable | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3 | NA | ||
table · not-accessible · current The table exposes the security policy statistics entries. These statistics can be enabled and disabled by configuration on a per policy basis. | ||||
| RjnxJsPolicyStatsEntry | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1 | NA | ||
row · not-accessible · current An entry contains a security policy. The security policies are configured under from-zone, to-zone direction. Under a specific zone direction, each security policy contains name, match-criteria, action, and other options. | ||||
| CjnxJsPolicyStatsCreationTime | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The creation timestamp of the policy statistics entry. The timestamp is modified during the creation and deletion of the policy statistics entry. When the timestamp changes, the policy entry statistics is assumed to be a new statistics entry and not associated with previous statistic entry of the same indices. | ||||
| CjnxJsPolicyStatsInputBytes | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The number of input bytes enters the FW through this policy. | ||||
| CjnxJsPolicyStatsInputByteRate | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of input bytes per second or the rate that enters the FW through this policy. | ||||
| CjnxJsPolicyStatsOutputBytes | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The number of output bytes associated with this policy. | ||||
| CjnxJsPolicyStatsOutputByteRate | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of output bytes per second or the rate associated with this policy. | ||||
| CjnxJsPolicyStatsInputPackets | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of input packets enters the FW through this policy. | ||||
| CjnxJsPolicyStatsInputPacketRate | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of input packets per second or the input packet rate of the FW through this policy. | ||||
| CjnxJsPolicyStatsOutputPackets | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of output packets associated with this policy. | ||||
| CjnxJsPolicyStatsOutputPacketRate | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of output packets per second or the rate associated with this policy. | ||||
| CjnxJsPolicyStatsNumSessions | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of sessions associated with this policy. | ||||
| CjnxJsPolicyStatsSessionRate | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current The rate of the sessions associated with this policy. | ||||
| CjnxJsPolicyStatsSessionDeleted | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of sessions associated with this policy. | ||||
| CjnxJsPolicyStatsLookups | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of policy lookups performed. | ||||
| CjnxJsPolicyStatsCountAlarm | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.14 | Counter32 | RO | obsolete |
column · Counter32 · read-only · obsolete The number of alarm counted when the traffic exceeds certain threshold configuration. The node is obsoleted. | ||||
| CjnxJsPolicyStatsInBytesInit | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The number of input bytes in the session initial direction enters the FW through this policy. | ||||
| CjnxJsPolicyStatsInBytesRep | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The number of input bytes in the session reply direction enters the FW through this policy. | ||||
| CjnxJsPolicyStatsInByteRtInit | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of input bytes in the session initial direction per second or the rate that enters the FW through this policy. | ||||
| CjnxJsPolicyStatsInByteRtRep | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of input bytes in the session reply direction per second or the rate that enters the FW through this policy. | ||||
| CjnxJsPolicyStatsOutBytesInit | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The number of output bytes in the session initial direction associated with this policy. | ||||
| CjnxJsPolicyStatsOutBytesRep | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The number of output bytes in the session reply direction associated with this policy. | ||||
| CjnxJsPolicyStatsOutByteRtInit | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.21 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of output bytes in the session initial direction per second or the rate associated with this policy. | ||||
| CjnxJsPolicyStatsOutByteRtRep | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.22 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of output bytes in the session reply direction per second or the rate associated with this policy. | ||||
| CjnxJsPolicyStatsInPacketsInit | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The number of input packets in the session initial direction enters the FW through this policy. | ||||
| CjnxJsPolicyStatsInPacketsRep | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current The number of input packets in the session reply direction enters the FW through this policy. | ||||
| CjnxJsPolicyStatsInPacketRtInit | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.25 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of input packets in the session initial direction per second or the input packet rate of the FW through this policy. | ||||
| CjnxJsPolicyStatsInPacketRtRep | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.26 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of input packets in the session reply direction per second or the input packet rate of the FW through this policy. | ||||
| CjnxJsPolicyStatsOutPacketsInit | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current The number of output packets in the session initial direction associated with this policy. | ||||
| CjnxJsPolicyStatsOutPacketsRep | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current The number of output packets in the session reply direction associated with this policy. | ||||
| CjnxJsPolicyStatsOutPacketRtInit | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.29 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of output packets in the session initial direction per second or the rate associated with this policy. | ||||
| CjnxJsPolicyStatsOutPacketRtRep | 1.3.6.1.4.1.2636.3.39.1.4.1.1.3.1.30 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of output packets in the session reply direction per second or the rate associated with this policy. | ||||
| NjnxJsPolicyTrapVars | 1.3.6.1.4.1.2636.3.39.1.4.1.2 | |||
| NjnxJsPolicySystemStats | 1.3.6.1.4.1.2636.3.39.1.4.1.3 | |||
| NjnxJsPolicySystemStatsIPv4 | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1 | |||
| SjnxJsPolicySystemStatsTotalAllowIPv4Packets | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv4 packets allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv4Bytes | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv4 bytes allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv4PacketsRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv4 packets allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv4BytesRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv4 bytes allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalDropIPv4Packets | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv4 packets dropped by all policies. | ||||
| SjnxJsPolicySystemStatsTotalDropIPv4Bytes | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv4 bytes dropped by all policies. | ||||
| SjnxJsPolicySystemStatsTotalDropIPv4PacketsRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.7 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv4 packets dropped by all policies. | ||||
| SjnxJsPolicySystemStatsTotalDropIPv4BytesRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.8 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv4 bytes dropped by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv4Flows | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv4 flows allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv4FlowsRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.1.10 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv4 flows allowed by all policies. | ||||
| NjnxJsPolicySystemStatsIPv6 | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2 | |||
| SjnxJsPolicySystemStatsTotalAllowIPv6Packets | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv6 packets allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv6Bytes | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv6 bytes allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv6PacketsRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv6 packets allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv6BytesRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv6 bytes allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalDropIPv6Packets | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv6 packets dropped by all policies. | ||||
| SjnxJsPolicySystemStatsTotalDropIPv6Bytes | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv6 bytes dropped by all policies. | ||||
| SjnxJsPolicySystemStatsTotalDropIPv6PacketsRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.7 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv6 packets dropped by all policies. | ||||
| SjnxJsPolicySystemStatsTotalDropIPv6BytesRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.8 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv6 bytes dropped by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv6Flows | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of IPv6 flows allowed by all policies. | ||||
| SjnxJsPolicySystemStatsTotalAllowIPv6FlowsRate | 1.3.6.1.4.1.2636.3.39.1.4.1.3.2.10 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The rate of IPv6 flows allowed by all policies. | ||||
| SjnxJsPolicySystemStatsEnabled | 1.3.6.1.4.1.2636.3.39.1.4.1.3.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The configured status of Policy System Wide Statistic Collection.
| ||||