JUNIPER-JS-NAT-MIB
Juniper Networks, Inc.This module defines the object that are used to monitor network address translation attributes.
snmptranslate -m JUNIPER-JS-NAT-MIB -Tpsnmpwalk -v2c -c <community> -m JUNIPER-JS-NAT-MIB <host> 1.3.6.1.4.1.2636.3.39.1.7.1Imports
| IF-MIB | InterfaceIndex |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv4, InetAddressType |
| JUNIPER-JS-SMI | jnxJsNAT |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjnxJsNatMIB | 1.3.6.1.4.1.2636.3.39.1.7.1 | |||
identity This module defines the object that are used to monitor network address translation attributes. | ||||
| NjnxJsNatNotifications | 1.3.6.1.4.1.2636.3.39.1.7.1.0 | |||
| !jnxJsNatAddrPoolThresholdStatus | 1.3.6.1.4.1.2636.3.39.1.7.1.0.1 | deprecated | ||
notification · deprecated The NAT address pool untilization threshold status
trap signifies that the address pool utilization
is either exceeds certain percentage, or clear of
that percentage.
jnxJsNatSrcIpPoolName is the name of the resource pool
jnxJsNatAddrPoolUtil is the percentage of utilization
of the address pool. | ||||
| !jnxJsSrcNatPoolThresholdStatus | 1.3.6.1.4.1.2636.3.39.1.7.1.0.2 | |||
notification · current The Source NAT pool untilization threshold status trap signifies that the address pool or PAT utilization is either exceeds certain percentage, or clear of that percentage. jnxJsNatTrapPoolName is the name of source pool jnxJsNatAddrPoolUtil is the percentage of utilization of the address pool. jnxJsNatPatPoolUtil is the percentage of utilization of the pat pool. | ||||
| !jnxJsNatRuleThresholdStatus | 1.3.6.1.4.1.2636.3.39.1.7.1.0.3 | |||
notification · current The NAT rule session count threshold status trap signifies that the number of sessions is either exceeds certain threshold, or clear of that threshold. jnxJsNatTrapRuleName is the name of rule jnxJsNatTrapRuleType is the type of rule. jnxJsNatTrapRuleConcurrentHits is the session count of that rule. | ||||
| !jnxJsSrcNatOverloadedPoolThresholdStatus | 1.3.6.1.4.1.2636.3.39.1.7.1.0.4 | |||
notification · current The Source NAT overloaded pool utilization threshold status trap signifies that the PAT utilization per port overload index under a NAT IP address is either exceeding certain percentage, or clear of that percentage. jnxJsNatTrapPoolName is name of the source pool jnxJsNatPoolIpAddress is the NAT IP address from the source pool jnxJsNatPortOverloadingIndex is the port overload index corresponding to the NAT IP address. jnxJsNatOverloadedPatPoolUtil is the percentage of utilization of the pat pool for the given NAT IP and port overload index. | ||||
| !jnxJsSrcNatSubThresholdStatus | 1.3.6.1.4.1.2636.3.39.1.7.1.0.5 | |||
notification · current The SRC NAT subscriber threshold status trap signifies that the utilization of port-bloks/ports usage for a pool is either exceeds certain percentage, or clear of that percentage. jnxJsNatSubscriberIp is the subscriber IP address jnxJsNatTrapPoolName is name of the source pool jnxJsSrcNatPoolType indicates the type of the pool jnxJsNatSubsPoolUtil is the percentage of subscriber utilization of port-blocks/ports from the pool. | ||||
| NjnxJsNatObjects | 1.3.6.1.4.1.2636.3.39.1.7.1.1 | |||
| SjnxJsSrcNatNumOfEntries | 1.3.6.1.4.1.2636.3.39.1.7.1.1.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of dynamic addresses being translated. jnxJsSrcNatNumOfEntries provides the total number of entries in the jnxJsSrcNatTable. | ||||
| TjnxJsSrcNatTable | 1.3.6.1.4.1.2636.3.39.1.7.1.1.2 | NA | deprecated | |
table · not-accessible · deprecated This table exposes the source NAT translation attributes of the translated addresses. When performing source IP address translation, the device translates the original source IP address and/or port number to different one. The resource, address source pools provide the security device with a supply of addresses from which to draw when performing source network address translation. The security device has the following types of source pools: - source pool with PAT (Port Address Translation) - source pool without PAT - Static Source Pool This table contains information on source IP address translation only. | ||||
| RjnxJsSrcNatEntry | 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1 | NA | deprecated | |
row · not-accessible · deprecated Source NAT address entries. It is indexed by the address pool table and the address allocated. | ||||
| CjnxJsNatSrcIpPoolName | 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.1 | DisplayString (SIZE (1..64)) | AN | deprecated |
column · DisplayString (SIZE (1..64)) · accessible-for-notify · deprecated The name of dynamic source IP address pool. This is the address pool where the translated address is allocated from. | ||||
| CjnxJsNatSrcGlobalAddr | 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.2 | InetAddressIPv4 | NA | deprecated |
column · InetAddressIPv4 · not-accessible · deprecated The name of dynamic source IP address allocated from the address pool used in the NAT translation. | ||||
| CjnxJsNatSrcPortPoolType | 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.3 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated Source NAT can do address translation with or without port
address translation (PAT). The source port pool type indicates
whether the address translation is done with port or without
the port, or if it is a static translation.
withPAT(Source Pool with PAT): the security device translates
both source IP address and port number of the packets
withoutPAT (Source Pool without PAT): the device performs source
network address translation for the IP address without
performing port address translation (PAT) for the source port
number.
Static translation means that one range of IP addresses is
statically mapped one to one to a shifted range of IP addresses.
| ||||
| CjnxJsNatSrcNumOfPortInuse | 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.4 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The number of ports in use for this NAT address entry. This attribute is only applicable to NAT translation with PAT. | ||||
| CjnxJsNatSrcNumOfSessions | 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.5 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The number of sessions are in use based on this NAT address entry. This attribute is only applicable to NAT translation without PAT. | ||||
| CjnxJsNatSrcAssocatedIf | 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.6 | InterfaceIndex | RO | deprecated |
column · InterfaceIndex · read-only · deprecated The index of interface associated with this NAT address entry. This is an unique value, greater than zero, for each interface. | ||||
| TjnxJsNatIfSrcPoolPortTable | 1.3.6.1.4.1.2636.3.39.1.7.1.1.3 | NA | ||
table · not-accessible · current This table monitors the port usage of the NAT interface
source IP address pool.
Interface source pool is pre-defined. This source pool is
referenced in a policy it is configured. The security
device translates the source IP address to the address of
the egress interface for the traffic matching a policy which
references interface source pool. The security device always
applies port address translation (PAT) for interface source
pool. | ||||
| RjnxJsNatIfSrcPoolPortEntry | 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1 | NA | ||
row · not-accessible · current Source NAT address entries. It is indexed by the address pool table and the address. | ||||
| CjnxJsNatIfSrcPoolIndex | 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.1 | INTEGER (0..2147483647) | NA | |
column · INTEGER (0..2147483647) · not-accessible · current The index of the port pool of this address pool. | ||||
| CjnxJsNatIfSrcPoolTotalSinglePorts | 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The total number of single ports in a port pool. | ||||
| CjnxJsNatIfSrcPoolAllocSinglePorts | 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The number of single ports in a port pool allocated or inuse. | ||||
| CjnxJsNatIfSrcPoolTotalTwinPorts | 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The total number of twin ports in a port pool. | ||||
| CjnxJsNatIfSrcPoolAllocTwinPorts | 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The number of twin ports in a port pool allocated or inuse. | ||||
| TjnxJsSrcNatStatsTable | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4 | NA | ||
table · not-accessible · current This table exposes the source NAT translation attributes of the translated addresses. When performing source IP address translation, the device translates the original source IP address and/or port number to different one. The resource, address source pools provide the security device with a supply of addresses from which to draw when performing source network address translation. The security device has the following types of source pools: - source pool with PAT (Port Address Translation) - source pool without PAT - Static Source Pool This table contains information on source IP address translation only. | ||||
| RjnxJsSrcNatStatsEntry | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1 | NA | ||
row · not-accessible · current Source NAT address entries. It is indexed by the address pool table and the address allocated. | ||||
| CjnxJsNatSrcPoolName | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.1 | DisplayString (SIZE (1..64)) | AN | |
column · DisplayString (SIZE (1..64)) · accessible-for-notify · current The name of dynamic source IP address pool. This is the address pool where the translated address is allocated from. | ||||
| CjnxJsNatSrcXlatedAddrType | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of dynamic source IP address allocated from the address pool used in the NAT translation. For NAT MIB, supporting ipv4(1) and ipv6(2) only.
| ||||
| CjnxJsNatSrcXlatedAddr | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.3 | InetAddress | NA | |
column · InetAddress · not-accessible · current The name of dynamic source IP address allocated from the address pool used in the NAT translation. For NAT MIB, supporting IPv4 and IPv6 address only. | ||||
| CjnxJsNatSrcPoolType | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Source NAT can do address translation with or without port
address translation (PAT). The source port pool type indicates
whether the address translation is done with port or without
the port, or if it is a static translation.
withPAT(Source Pool with PAT): the security device translates
both source IP address and port number of the packets
withoutPAT (Source Pool without PAT): the device performs source
network address translation for the IP address without
performing port address translation (PAT) for the source port
number.
Static translation means that one range of IP addresses is
statically mapped one to one to a shifted range of IP addresses.
| ||||
| CjnxJsNatSrcNumPortInuse | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The number of ports in use for this NAT address entry. This attribute is only applicable to NAT translation with PAT. | ||||
| CjnxJsNatSrcNumSessions | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The number of sessions are in use based on this NAT address entry. | ||||
| CjnxJsNatSrcNumPortAvail | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The maximum number of ports available with this pool. This attribute is only applicable on MX platform to NAT translations with PAT. | ||||
| CjnxJsNatSrcNumAddressAvail | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The maximum number of addresses available in this pool. This attribute is only applicable on MX platform. | ||||
| CjnxJsNatSrcNumAddressInuse | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of addresses in use from this pool. This attribute is only applicable on MX platform to NAT translations without PAT. | ||||
| CjnxJsNatSrcNumAddressMapped | 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of public addresses mapped. This attribute is only applicable on MX platform for NAT translations with PAT. | ||||
| TjnxJsNatRuleTable | 1.3.6.1.4.1.2636.3.39.1.7.1.1.5 | NA | ||
table · not-accessible · current This table monitors NAT rule hits | ||||
| RjnxJsNatRuleEntry | 1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1 | NA | ||
row · not-accessible · current NAT rule hit entries. It is indexed by the rule index | ||||
| CjnxJsNatRuleName | 1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.1 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current NAT rule name | ||||
| CjnxJsNatRuleType | 1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current NAT types: Source, Destination and Static
| ||||
| CjnxJsNatRuleTransHits | 1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.3 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The number of hits on this NAT rule, Deprecated to avoid negative value. | ||||
| CjnxJsNatRuleHits | 1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of hits on this NAT rule to deprecate jnxJsNatRuleTransHits | ||||
| CjnxJsNatRuleNumOfSessions | 1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of sessions on this NAT rule | ||||
| CjnxJsNatTransType | 1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The Translation type of this NAT rule
| ||||
| TjnxJsNatPoolTable | 1.3.6.1.4.1.2636.3.39.1.7.1.1.6 | NA | ||
table · not-accessible · current This table monitors NAT pool hits | ||||
| RjnxJsNatPoolEntry | 1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1 | NA | ||
row · not-accessible · current NAT pool hit entries. It is indexed by the pool index | ||||
| CjnxJsNatPoolName | 1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.1 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current NAT Pool name | ||||
| CjnxJsNatPoolType | 1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current NAT types: Source, Destination and Static
| ||||
| CjnxJsNatPoolTransHits | 1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.3 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The number of hits on this NAT Pool, Deprecated to avoid negative value. | ||||
| CjnxJsNatPoolHits | 1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of hits on this NAT Pool to deprecate jnxJsNatPoolTransHits. | ||||
| CjnxJsNatPoolUtil | 1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.5 | INTEGER (0..100) | RO | |
column · INTEGER (0..100) · read-only · current The dynamic pool utilization in percentage. | ||||
| TjnxJsNatPbaStatsTable | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7 | NA | ||
table · not-accessible · current This table monitors NAT PBA stats | ||||
| RjnxJsNatPbaStatsEntry | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1 | NA | ||
row · not-accessible · current NAT pool hit entries. It is indexed by the pool index
| ||||
| CjnxJsNatPbaPoolName | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.1 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current NAT PBA Pool name | ||||
| CjnxJsNatPbaOutOfPortError | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The Number of times the out of port error is hit | ||||
| CjnxJsNatPbaMaxNumberOfPortBlocksUsed | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The count of Max number of blocks used for the pool | ||||
| CjnxJsNatPbaCurrentNumberOfPortBlocksInUse | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The count of current number of blocks used for the pool | ||||
| CjnxJsNatPbaPortBlockAllocErrors | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The count of port block allocation errors | ||||
| CjnxJsNatPbaPortBlockMemAllocErrors | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The count of port block memory allocation errors | ||||
| CjnxJsNatPbaPortBlockLimitExeededErrors | 1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The count of port block limit exceeded errors hit | ||||
| TjnxJsNatPortOverloadUtilTable | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8 | NA | ||
table · not-accessible · current This table provides utilization information of Port overloaded Source NAT Pool, per NAT IP address and per port overloading index. | ||||
| RjnxJsNatPortOverloadUtilEntry | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1 | NA | ||
row · not-accessible · current Source NAT overloaded address-port entries. Indexed by NAT Pool name, IP address and port overloading index | ||||
| CjnxJsNatPortOverloadUtilPoolName | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.1 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current Source NAT Pool name. | ||||
| CjnxJsNatPortOverloadUtilIpAddressType | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current NAT IP address type, ipv4 or ipv6. | ||||
| CjnxJsNatPortOverloadUtilIpAddress | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.3 | InetAddress | RO | |
column · InetAddress · read-only · current Dynamic source IP address allocated from the address pool used in the NAT translation. | ||||
| CjnxJsNatPortOverloadUtilPortOvIndex | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.4 | INTEGER (0..32) | RO | |
column · INTEGER (0..32) · read-only · current Port overloading index corresponding to the NAT IP address. | ||||
| CjnxJsNatPortOverloadUtilSinglePortTotal | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of single ports corresponding to the NAT address and port overloading index. | ||||
| CjnxJsNatPortOverloadUtilSinglePortAlloc | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Single ports in use corresponding to the NAT address and port overloading index. | ||||
| CjnxJsNatPortOverloadUtilSinglePortUtil | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Single ports utilization (in percentage) corresponding to the NAT address and port overloading index. | ||||
| CjnxJsNatPortOverloadUtilTwinPortTotal | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of twin ports corresponding to the NAT address and port overloading index. | ||||
| CjnxJsNatPortOverloadUtilTwinPortAlloc | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Twin ports in use corresponding to the NAT address and port overloading index. | ||||
| CjnxJsNatPortOverloadUtilTwinPortUtil | 1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Twin ports utilization (in percentage) corresponding to the NAT address and port overloading index. | ||||
| NjnxJsNatTrapVars | 1.3.6.1.4.1.2636.3.39.1.7.1.2 | |||
| SjnxJsNatAddrPoolUtil | 1.3.6.1.4.1.2636.3.39.1.7.1.2.1 | Integer32 (0..100) | AN | |
scalar · Integer32 (0..100) · accessible-for-notify · current The dynamic address pool utilization in percentage. | ||||
| SjnxJsNatTrapPoolName | 1.3.6.1.4.1.2636.3.39.1.7.1.2.2 | DisplayString (SIZE (1..64)) | AN | |
scalar · DisplayString (SIZE (1..64)) · accessible-for-notify · current Source NAT Pool name who issues trap | ||||
| SjnxJsNatPatPoolUtil | 1.3.6.1.4.1.2636.3.39.1.7.1.2.3 | Integer32 (0..100) | AN | |
scalar · Integer32 (0..100) · accessible-for-notify · current The dynamic pat pool utilization in percentage. | ||||
| SjnxJsNatTrapRuleName | 1.3.6.1.4.1.2636.3.39.1.7.1.2.4 | DisplayString (SIZE (1..64)) | AN | |
scalar · DisplayString (SIZE (1..64)) · accessible-for-notify · current NAT rule name | ||||
| SjnxJsNatTrapRuleType | 1.3.6.1.4.1.2636.3.39.1.7.1.2.5 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current NAT types: Source, Destination and Static
| ||||
| SjnxJsNatTrapRuleNumOfSessions | 1.3.6.1.4.1.2636.3.39.1.7.1.2.6 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The number of sessions | ||||
| SjnxJsNatPoolIpAddress | 1.3.6.1.4.1.2636.3.39.1.7.1.2.7 | DisplayString (SIZE (1..40)) | AN | |
scalar · DisplayString (SIZE (1..40)) · accessible-for-notify · current NAT IP address. | ||||
| SjnxJsNatPortOverloadingIndex | 1.3.6.1.4.1.2636.3.39.1.7.1.2.8 | Integer32 (0..127) | AN | |
scalar · Integer32 (0..127) · accessible-for-notify · current Port overload index under the NAT IP. | ||||
| SjnxJsNatOverloadedPatPoolUtil | 1.3.6.1.4.1.2636.3.39.1.7.1.2.9 | Integer32 (0..100) | AN | |
scalar · Integer32 (0..100) · accessible-for-notify · current pat pool utilization per port overload index in percentage. | ||||
| SjnxJsNatSubscriberIp | 1.3.6.1.4.1.2636.3.39.1.7.1.2.10 | DisplayString (SIZE (1..40)) | AN | |
scalar · DisplayString (SIZE (1..40)) · accessible-for-notify · current Subscriber IP address. | ||||
| SjnxJsSrcNatPoolType | 1.3.6.1.4.1.2636.3.39.1.7.1.2.11 | DisplayString (SIZE (1..8)) | AN | |
scalar · DisplayString (SIZE (1..8)) · accessible-for-notify · current NAT Pool Type. | ||||
| SjnxJsNatSubsPoolUtil | 1.3.6.1.4.1.2636.3.39.1.7.1.2.12 | Integer32 (0..100) | AN | |
scalar · Integer32 (0..100) · accessible-for-notify · current Subscriber utilization of pool in percentage. | ||||
Traps / Notifications
- jnxJsNatAddrPoolThresholdStatus
1.3.6.1.4.1.2636.3.39.1.7.1.0.1 - jnxJsNatRuleThresholdStatus
1.3.6.1.4.1.2636.3.39.1.7.1.0.3 - jnxJsSrcNatOverloadedPoolThresholdStatus
1.3.6.1.4.1.2636.3.39.1.7.1.0.4 - jnxJsSrcNatPoolThresholdStatus
1.3.6.1.4.1.2636.3.39.1.7.1.0.2 - jnxJsSrcNatSubThresholdStatus
1.3.6.1.4.1.2636.3.39.1.7.1.0.5