JUNIPER-ATM-MIB
Juniper Networks, Inc.The Juniper enterprise MIB for ATM interfaces and VCs
snmptranslate -m JUNIPER-ATM-MIB -Tpsnmpwalk -v2c -c <community> -m JUNIPER-ATM-MIB <host> 1.3.6.1.4.1.2636.3.10Imports
| ATM-MIB | atmInterfaceConfEntry, atmVclEntry, atmVplEntry |
|---|---|
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddressIPv4, InetAddressIPv6 |
| JUNIPER-SMI | jnxMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjnxAtm | 1.3.6.1.4.1.2636.3.10 | |||
identity The Juniper enterprise MIB for ATM interfaces and VCs | ||||
| TjnxAtmIfTable | 1.3.6.1.4.1.2636.3.10.1 | NA | ||
table · not-accessible · current This table contains config and stats parameters, one entry per physical interface (ATM port). | ||||
| RjnxAtmIfEntry | 1.3.6.1.4.1.2636.3.10.1.1 | NA | ||
row · not-accessible · current This entry contains additional ATM interface config and stats objects, not covered in standard mibs. Each entry is an extension of atmInterfaceConfEntry defined in ATM-MIB.
| ||||
| CjnxAtmIfPortType | 1.3.6.1.4.1.2636.3.10.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The physical port type.
| ||||
| CjnxAtmIfEncaps | 1.3.6.1.4.1.2636.3.10.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current ATM physical link layer encapsulation.
| ||||
| CjnxAtmIfLpBackInfo | 1.3.6.1.4.1.2636.3.10.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Loop back config and type.
| ||||
| CjnxAtmIfScrambleEnable | 1.3.6.1.4.1.2636.3.10.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Shows whether scrambling is enabled or disabled
| ||||
| CjnxAtmIfTxCellCount | 1.3.6.1.4.1.2636.3.10.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The number of ATM cells transmitted by the interface. Includes Idle cells transmitted. | ||||
| CjnxAtmIfRxCellCount | 1.3.6.1.4.1.2636.3.10.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The number of ATM cells received by the interface. Excludes Idle cells received. | ||||
| CjnxAtmIfTxIdleCellCount | 1.3.6.1.4.1.2636.3.10.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of idle cells sent by the port. When the ATM interface has nothing to send, it sends idle cells to fill the time slot. | ||||
| CjnxAtmIfUncorrHCSErrs | 1.3.6.1.4.1.2636.3.10.1.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of uncorrectable cell Header Check Sequence (HCS) Errors that occurred. | ||||
| CjnxAtmIfCorrHCSErrs | 1.3.6.1.4.1.2636.3.10.1.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of correctable cell Header Check Sequence (HCS) Errors that occurred. | ||||
| CjnxAtmIfTxCellFIFOOverRuns | 1.3.6.1.4.1.2636.3.10.1.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The number of overruns in the Transmit FIFO. | ||||
| CjnxAtmIfRxCellFIFOOverRuns | 1.3.6.1.4.1.2636.3.10.1.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The number of overruns in the Receive FIFO. | ||||
| CjnxAtmIfRxCellFIFOUnderRuns | 1.3.6.1.4.1.2636.3.10.1.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The number of underruns in the receive FIFO. | ||||
| CjnxAtmIfInInvalidVCCells | 1.3.6.1.4.1.2636.3.10.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Cells that arrived for non existent VC. | ||||
| CjnxAtmIfInNoBufferOAMCells | 1.3.6.1.4.1.2636.3.10.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The number of received OAM cells or raw cells dropped because no buffers were available to handle them. | ||||
| CjnxAtmIfInNoBufDropPkts | 1.3.6.1.4.1.2636.3.10.1.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The number of AAL5 packets dropped because there was no enough buffer to handle them. | ||||
| CjnxAtmIfOutVCQueueDrops | 1.3.6.1.4.1.2636.3.10.1.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets dropped because of queue limits on each VC. | ||||
| CjnxAtmIfInBadCrcs | 1.3.6.1.4.1.2636.3.10.1.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of incoming CRC errors. | ||||
| CjnxAtmIfInLenErrPkts | 1.3.6.1.4.1.2636.3.10.1.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The number of AAL5 packets dropped because their length was incorrect. | ||||
| CjnxAtmIfInTimeoutPkts | 1.3.6.1.4.1.2636.3.10.1.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The number of AAL5 packets dropped because of reassembly timeout. | ||||
| CjnxAtmIfL2CircuitMode | 1.3.6.1.4.1.2636.3.10.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current The layer 2 circuit mode of this Atm interface. Note, this applies only to interfaces on AtmII pics.
| ||||
| TjnxAtmVCTable | 1.3.6.1.4.1.2636.3.10.2 | NA | ||
table · not-accessible · current A table of all p2p/p2mp/multicast VC entries. | ||||
| RjnxAtmVCEntry | 1.3.6.1.4.1.2636.3.10.2.1 | NA | ||
row · not-accessible · current Special Cases: - No traffic Stats for multicast VCs. (0 by default). - Multipoint Destination IP Address for a p2p vc is invalid (0.0.0.0 by default). - When the encapsulation type for the logical interface (to which VC belongs) is 'atmCccCellRelay', only Generic VC Info is valid. - If OAM is disabled (indicated in jnxAtmVCFlags), then all the OAM config & F5 stats info is invalid. (zeroed by default).
| ||||
| CjnxAtmVCConnType | 1.3.6.1.4.1.2636.3.10.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The type of connection. The type 'other' means vc type is unknown or is not one of the other types.
| ||||
| CjnxAtmVCEncapsulation | 1.3.6.1.4.1.2636.3.10.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The atm encapsulation type associated with the VC.
atmCccCellRelay : ATM Cell Relay for CCC
atmCccVcMux : ATM VC for CCC
atmCiscoNlpid : Cisco-compatible ATM NLPID encapsulation
atmNlpid : ATM NLPID encapsulation
atmSnap : ATM LLC/SNAP encapsulation
atmVcMux : ATM VC multiplexing
atmTccVcMux : TCC (Translational Cross Connection)
over ATM VC MUX encapsulation
atmTccSnap : TCC (Translational Cross Connection)
over ATM LLC/SNAP encapsulation
| ||||
| CjnxAtmVCMpDestIPv4Addr | 1.3.6.1.4.1.2636.3.10.2.1.3 | InetAddressIPv4 | RO | |
column · InetAddressIPv4 · read-only · current This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint destination IPv4 address. When the VC connection type is other than p2mp OR when the multipoint destination address type is of IPv6, this object returns 0.0.0.0 by default. | ||||
| CjnxAtmVCMpDestIPv6Addr | 1.3.6.1.4.1.2636.3.10.2.1.4 | InetAddressIPv6 | RO | |
column · InetAddressIPv6 · read-only · current This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint destination IPv6 address. When the VC connection type is other than p2mp OR when the multipoint destination address type is of IPv4, this object returns all the bytes of addr filled with 0. | ||||
| CjnxAtmVCFlags | 1.3.6.1.4.1.2636.3.10.2.1.5 | JnxAtmFlags | RO | |
column · JnxAtmFlags · read-only · current Flags related to the VC. | ||||
| CjnxAtmVCTotalDownTime | 1.3.6.1.4.1.2636.3.10.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The total VC down time in seconds ever since the system rebooted. | ||||
| CjnxAtmVCInBytes | 1.3.6.1.4.1.2636.3.10.2.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes received on the VC. | ||||
| CjnxAtmVCOutBytes | 1.3.6.1.4.1.2636.3.10.2.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes sent out on the VC. | ||||
| CjnxAtmVCInPkts | 1.3.6.1.4.1.2636.3.10.2.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets received on the VC. | ||||
| CjnxAtmVCOutPkts | 1.3.6.1.4.1.2636.3.10.2.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets sent out on the VC. | ||||
| CjnxAtmVCTailQueuePktDrops | 1.3.6.1.4.1.2636.3.10.2.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than allowed. | ||||
| CjnxAtmVCOAMPeriod | 1.3.6.1.4.1.2636.3.10.2.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current This time interval indicates how often the F5 cells are sent to know the status of the VC. | ||||
| CjnxAtmVCOAMUpCellCount | 1.3.6.1.4.1.2636.3.10.2.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The minimum number of loopback cells to be received to declare that the VC is up. | ||||
| CjnxAtmVCOAMDownCellCount | 1.3.6.1.4.1.2636.3.10.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The minimum number of loopback cells to be received to declare that the VC is down. This object would have zero value if OAM is not enabled. (indicated in jnxAtmVCFlags) | ||||
| CjnxAtmVCInOAMF5LoopCells | 1.3.6.1.4.1.2636.3.10.2.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F5 loopback cells received. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | ||||
| CjnxAtmVCOutOAMF5LoopCells | 1.3.6.1.4.1.2636.3.10.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F5 loopback cells sent. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | ||||
| CjnxAtmVCInOAMF5RDICells | 1.3.6.1.4.1.2636.3.10.2.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F5 cells received, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | ||||
| CjnxAtmVCOutOAMF5RDICells | 1.3.6.1.4.1.2636.3.10.2.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F5 cells transmitted, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | ||||
| CjnxAtmVCInOAMF5AISCells | 1.3.6.1.4.1.2636.3.10.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F5 cells received, with AIS(Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | ||||
| CjnxAtmVCOutOAMF5AISCells | 1.3.6.1.4.1.2636.3.10.2.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F5 cells transmitted, with AIS (Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | ||||
| TjnxAtmVpTable | 1.3.6.1.4.1.2636.3.10.3 | NA | ||
table · not-accessible · current The table of ATM VPs. This table augments atmVplTable defined in standard ATM mib. | ||||
| RjnxAtmVpEntry | 1.3.6.1.4.1.2636.3.10.3.1 | NA | ||
row · not-accessible · current Each entry represents config, status and statistics info related to an ATM VP configured. This entry augments the atmVplEntry defined in standard ATM mib (RFC 2515). So ifIndex and VPI are the indices to this table. Caveats: - Traffic stats are available per VP tunnel, only if shaping is configured on the VP. Object 'jnxAtmVpFlags' can be used to determine if shaping is enabled. - When no OAM is configured, OAM config and OAM stat objects' values are invalid (zero by default). Object 'jnxAtmVpFlags' contains info on whether OAM is configured or not. - For atm-1 VPs, the only valid object is jnxAtmVpFlags.
| ||||
| CjnxAtmVpFlags | 1.3.6.1.4.1.2636.3.10.3.1.1 | Bits | RO | |
column · Bits · read-only · current The flags associated with this VP.
| ||||
| CjnxAtmVpTotalDownTime | 1.3.6.1.4.1.2636.3.10.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The total VP downtime in seconds, ever since the system rebooted. | ||||
| CjnxAtmVpOamPeriod | 1.3.6.1.4.1.2636.3.10.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This time interval indicates how often the OAM F4 cells are sent to determine the status of the VP. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled. | ||||
| CjnxAtmVpOamUpCellCount | 1.3.6.1.4.1.2636.3.10.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The minimum number of consecutive loopback cells to be received to declare that the VP is up. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled. | ||||
| CjnxAtmVpOamDownCellCount | 1.3.6.1.4.1.2636.3.10.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The minimum number of consecutive loopback cells to be received to declare that the VP is down. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled. | ||||
| CjnxAtmVpInBytes | 1.3.6.1.4.1.2636.3.10.3.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes received on the VP. | ||||
| CjnxAtmVpOutBytes | 1.3.6.1.4.1.2636.3.10.3.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes sent out on the VP. | ||||
| CjnxAtmVpInPkts | 1.3.6.1.4.1.2636.3.10.3.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets received on the VP. | ||||
| CjnxAtmVpOutPkts | 1.3.6.1.4.1.2636.3.10.3.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets sent out on the VP. | ||||
| CjnxAtmVpInOamF4Cells | 1.3.6.1.4.1.2636.3.10.3.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 cells received on the VP. | ||||
| CjnxAtmVpOutOamF4Cells | 1.3.6.1.4.1.2636.3.10.3.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 cells transmitted on the VP. | ||||
| CjnxAtmVpInOamF4LoopCells | 1.3.6.1.4.1.2636.3.10.3.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 loopback cells received on the VP. | ||||
| CjnxAtmVpOutOamF4LoopCells | 1.3.6.1.4.1.2636.3.10.3.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 cells transmitted on the VP. | ||||
| CjnxAtmVpInOamF4RdiCells | 1.3.6.1.4.1.2636.3.10.3.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 RDI cells received on the VP. | ||||
| CjnxAtmVpOutOamF4RdiCells | 1.3.6.1.4.1.2636.3.10.3.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 RDI cells transmitted on the VP. | ||||
| CjnxAtmVpInOamF4AisCells | 1.3.6.1.4.1.2636.3.10.3.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 AIS cells received on the VP. | ||||
| TjnxAtmTrunkTable | 1.3.6.1.4.1.2636.3.10.4 | NA | ||
table · not-accessible · current A table of all ATM Trunk entries. | ||||
| RjnxAtmTrunkEntry | 1.3.6.1.4.1.2636.3.10.4.1 | NA | ||
row · not-accessible · current Special Cases: - When the encapsulation type for the logical interface (to which Trunk belongs) is 'atmCccCellRelay', only Generic Trunk Info is valid.
| ||||
| CjnxAtmTrunkId | 1.3.6.1.4.1.2636.3.10.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier for this ATM Trunk. | ||||
| CjnxAtmTrunkConnType | 1.3.6.1.4.1.2636.3.10.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of connection. The type 'other' means trunk type is unknown or is not one of the other types.
| ||||
| CjnxAtmTrunkEncapsulation | 1.3.6.1.4.1.2636.3.10.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The atm encapsulation type associated with the VC or Trunk. atmCccCellRelay : ATM Cell Relay for CCC
| ||||
| CjnxAtmTrunkFlags | 1.3.6.1.4.1.2636.3.10.4.1.4 | JnxAtmFlags | RO | |
column · JnxAtmFlags · read-only · current Flags related to the Trunk. | ||||
| CjnxAtmTrunkTotalDownTime | 1.3.6.1.4.1.2636.3.10.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The total Trunk down time in seconds ever since the system rebooted. | ||||
| CjnxAtmTrunkInBytes | 1.3.6.1.4.1.2636.3.10.4.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes received on the Trunk. | ||||
| CjnxAtmTrunkOutBytes | 1.3.6.1.4.1.2636.3.10.4.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes sent out on the Trunk. | ||||
| CjnxAtmTrunkInPkts | 1.3.6.1.4.1.2636.3.10.4.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets received on the Trunk. | ||||
| CjnxAtmTrunkOutPkts | 1.3.6.1.4.1.2636.3.10.4.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets sent out on the Trunk. | ||||
| CjnxAtmTrunkTailQueuePktDrops | 1.3.6.1.4.1.2636.3.10.4.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than allowed. | ||||
| CjnxAtmTrunkInOAMF4AISCells | 1.3.6.1.4.1.2636.3.10.4.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 cells received, with AIS(Alarm Indication Signal) bit set. | ||||
| CjnxAtmTrunkOutOAMF4AISCells | 1.3.6.1.4.1.2636.3.10.4.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OAM F4 cells sent, with AIS(Alarm Indication Signal) bit set. | ||||
Textual conventions
JnxAtmFlagsBitsactive(8)closed(6)cosEnabled(9)down(7)ilmiEnabled(1)inverseArpEnabled(0)multicast(5)oamEnabled(2)passiveOam(4)shapingEnabled(3)Flags related to the VC or Trunk.