JNX-IPSEC-MONITOR-MIB
Juniper Networks, Inc.snmptranslate -m JNX-IPSEC-MONITOR-MIB -Tpsnmpwalk -v2c -c <community> -m JNX-IPSEC-MONITOR-MIB <host> 1.3.6.1.4.1.2636.3.22Imports
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
|---|---|
| JUNIPER-IPSEC-FLOW-MON-MIB | JnxAuthAlgo, JnxDiffHellmanGrp, JnxEncapMode, JnxEncryptAlgo, JnxIkeAuthMethod, JnxIkeHashAlgo, JnxIkeNegoMode, JnxIkePeerRole, JnxIkePeerType, JnxKeyType, JnxRemotePeerType, JnxSAType |
| JUNIPER-SMI | jnxMibs |
| JUNIPER-SP-MIB | jnxSpSvcSetName |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeInterval |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjnxIpSecMonitorMIB | 1.3.6.1.4.1.2636.3.22 | |||
| NjnxIpSecMIBObjects | 1.3.6.1.4.1.2636.3.22.1 | |||
| NjnxIpSecLevels | 1.3.6.1.4.1.2636.3.22.1.1 | |||
| SjnxIpSecMibLevel | 1.3.6.1.4.1.2636.3.22.1.1.1 | Integer32 (1..4096) | RO | |
scalar · Integer32 (1..4096) · read-only · current The version of the IPsec MIB. | ||||
| NjnxIpSecPhaseOne | 1.3.6.1.4.1.2636.3.22.1.2 | |||
| TjnxIkeTunnelTable | 1.3.6.1.4.1.2636.3.22.1.2.1 | NA | ||
table · not-accessible · current The IPsec Phase-1 Internet Key Exchange Tunnel Table. There is one entry in this table for each active IPsec Phase-1 IKE Tunnel. | ||||
| RjnxIkeTunnelEntry | 1.3.6.1.4.1.2636.3.22.1.2.1.1 | NA | ||
row · not-accessible · current Each entry contains the attributes associated with an active IPsec Phase-1 IKE Tunnel. | ||||
| CjnxIkeTunIndex | 1.3.6.1.4.1.2636.3.22.1.2.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index of the IPsec Phase-1 IKE Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647. | ||||
| CjnxIkeTunLocalRole | 1.3.6.1.4.1.2636.3.22.1.2.1.1.2 | JnxIkePeerRole | RO | |
column · JnxIkePeerRole · read-only · current The role of local peer identity. The Role of
the local peer can be:
1. initiator.
2. or responder. | ||||
| CjnxIkeTunNegState | 1.3.6.1.4.1.2636.3.22.1.2.1.1.3 | JnxIkeNegState | RO | |
column · JnxIkeNegState · read-only · current The state of the current negotiation , It can be 1. matured 2. not matured | ||||
| CjnxIkeTunInitiatorCookie | 1.3.6.1.4.1.2636.3.22.1.2.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Cookie as generated by the peer that initiated the IKE Phase-1 negotiation. This cookie is carried in the ISAKMP header. | ||||
| CjnxIkeTunResponderCookie | 1.3.6.1.4.1.2636.3.22.1.2.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Cookie as generated by the peer responding to the IKE Phase-1 negotiation initiated by the remote peer. This cookie is carried in the ISAKMP header. | ||||
| CjnxIkeTunLocalIdType | 1.3.6.1.4.1.2636.3.22.1.2.1.1.6 | JnxIkePeerType | RO | |
column · JnxIkePeerType · read-only · current The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. or a fully qualified domain name string. 3. or a distinguished name string. | ||||
| CjnxIkeTunLocalIdValue | 1.3.6.1.4.1.2636.3.22.1.2.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is id_fqdn, then this is the FQDN of the remote peer. If the local peer type is a id_dn, then this is the distinguished name string of the local peer. | ||||
| CjnxIkeTunLocalGwAddrType | 1.3.6.1.4.1.2636.3.22.1.2.1.1.8 | InetAddressType | RO | |
column · InetAddressType · read-only · current The IP address type of the local endpoint (gateway) for the IPsec Phase-1 IKE Tunnel. | ||||
| CjnxIkeTunLocalGwAddr | 1.3.6.1.4.1.2636.3.22.1.2.1.1.9 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address of the local endpoint (gateway) for the IPsec Phase-1 IKE Tunnel. | ||||
| CjnxIkeTunLocalCertName | 1.3.6.1.4.1.2636.3.22.1.2.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the certificate used for authentication of the local tunnel endpoint. This object will have some valid value only if negotiated IKE authentication method is other than pre-saherd key. If the IKE negotiation do not use certificate based authentication method, then the value of this object will be a NULL string. | ||||
| CjnxIkeTunRemoteIdType | 1.3.6.1.4.1.2636.3.22.1.2.1.1.11 | JnxIkePeerType | RO | |
column · JnxIkePeerType · read-only · current The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. or a fully qualified domain name string. 3. or a distinguished name string. | ||||
| CjnxIkeTunRemoteIdValue | 1.3.6.1.4.1.2636.3.22.1.2.1.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is id_fqdn, then this is the FQDN of the remote peer. If the remote peer type is a id_dn, then this is the distinguished named string of the remote peer. | ||||
| CjnxIkeTunRemoteGwAddrType | 1.3.6.1.4.1.2636.3.22.1.2.1.1.13 | InetAddressType | RO | |
column · InetAddressType · read-only · current The IP address type of the remote gateway (endpoint) for the IPsec Phase-1 IKE Tunnel. | ||||
| CjnxIkeTunRemoteGwAddr | 1.3.6.1.4.1.2636.3.22.1.2.1.1.14 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address of the remote gateway (endpoint) for the IPsec Phase-1 IKE Tunnel. | ||||
| CjnxIkeTunNegoMode | 1.3.6.1.4.1.2636.3.22.1.2.1.1.15 | JnxIkeNegoMode | RO | |
column · JnxIkeNegoMode · read-only · current The negotiation mode of the IPsec Phase-1 IKE Tunnel. | ||||
| CjnxIkeTunDiffHellmanGrp | 1.3.6.1.4.1.2636.3.22.1.2.1.1.16 | JnxDiffHellmanGrp | RO | |
column · JnxDiffHellmanGrp · read-only · current The Diffie Hellman Group used in IPsec Phase-1 IKE negotiations. | ||||
| CjnxIkeTunEncryptAlgo | 1.3.6.1.4.1.2636.3.22.1.2.1.1.17 | JnxEncryptAlgo | RO | |
column · JnxEncryptAlgo · read-only · current The encryption algorithm used in IPsec Phase-1 IKE negotiations. | ||||
| CjnxIkeTunHashAlgo | 1.3.6.1.4.1.2636.3.22.1.2.1.1.18 | JnxIkeHashAlgo | RO | |
column · JnxIkeHashAlgo · read-only · current The hash algorithm used in IPsec Phase-1 IKE negotiations. | ||||
| CjnxIkeTunAuthMethod | 1.3.6.1.4.1.2636.3.22.1.2.1.1.19 | JnxIkeAuthMethod | RO | |
column · JnxIkeAuthMethod · read-only · current The authentication method used in IPsec Phase-1 IKE negotiations. | ||||
| CjnxIkeTunLifeTime | 1.3.6.1.4.1.2636.3.22.1.2.1.1.20 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds.
| ||||
| CjnxIkeTunActiveTime | 1.3.6.1.4.1.2636.3.22.1.2.1.1.21 | TimeInterval | RO | |
column · TimeInterval · read-only · current The length of time the IPsec Phase-1 IKE tunnel has been active in hundredths of seconds. | ||||
| CjnxIkeTunInOctets | 1.3.6.1.4.1.2636.3.22.1.2.1.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets received by this IPsec Phase-1 IKE security association.
| ||||
| CjnxIkeTunInPkts | 1.3.6.1.4.1.2636.3.22.1.2.1.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this IPsec Phase-1 IKE security association.
| ||||
| CjnxIkeTunOutOctets | 1.3.6.1.4.1.2636.3.22.1.2.1.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets sent by this IPsec Phase-1 IKE security association.
| ||||
| CjnxIkeTunOutPkts | 1.3.6.1.4.1.2636.3.22.1.2.1.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets sent by this IPsec Phase-1 IKE security association.
| ||||
| NjnxIpSecPhaseTwo | 1.3.6.1.4.1.2636.3.22.1.3 | |||
| TjnxIpSecTunnelTable | 1.3.6.1.4.1.2636.3.22.1.3.1 | NA | ||
table · not-accessible · current The IPsec Phase-2 Tunnel Table. There is one entry in this table for each active IPsec Phase-2 Tunnel. | ||||
| RjnxIpSecTunnelEntry | 1.3.6.1.4.1.2636.3.22.1.3.1.1 | NA | ||
row · not-accessible · current Each entry contains the attributes associated with an active IPsec Phase-2 Tunnel. | ||||
| CjnxIpSecTunIndex | 1.3.6.1.4.1.2636.3.22.1.3.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index of the IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647. | ||||
| CjnxIpSecRuleName | 1.3.6.1.4.1.2636.3.22.1.3.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the rule configured in IPSec configuration. | ||||
| CjnxIpSecTermName | 1.3.6.1.4.1.2636.3.22.1.3.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the term configured under IPSec rule. | ||||
| CjnxIpSecTunLocalGwAddrType | 1.3.6.1.4.1.2636.3.22.1.3.1.1.4 | InetAddressType | RO | |
column · InetAddressType · read-only · current The IP address type of the local gateway (endpoint) for the IPsec Phase-2 Tunnel. | ||||
| CjnxIpSecTunLocalGwAddr | 1.3.6.1.4.1.2636.3.22.1.3.1.1.5 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address of the local gateway (endpoint) for the IPsec Phase-2 Tunnel. | ||||
| CjnxIpSecTunRemoteGwAddrType | 1.3.6.1.4.1.2636.3.22.1.3.1.1.6 | InetAddressType | RO | |
column · InetAddressType · read-only · current The IP address type of the remote gateway (endpoint) for the IPsec Phase-2 Tunnel. | ||||
| CjnxIpSecTunRemoteGwAddr | 1.3.6.1.4.1.2636.3.22.1.3.1.1.7 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address of the remote gateway (endpoint) for the IPsec Phase-2 Tunnel. | ||||
| CjnxIpSecTunLocalProxyId | 1.3.6.1.4.1.2636.3.22.1.3.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Identifier for the local end. | ||||
| CjnxIpSecTunRemoteProxyId | 1.3.6.1.4.1.2636.3.22.1.3.1.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current Identifier for the remote end. | ||||
| CjnxIpSecTunKeyType | 1.3.6.1.4.1.2636.3.22.1.3.1.1.10 | JnxKeyType | RO | |
column · JnxKeyType · read-only · current The type of key used by the IPsec Phase-2 Tunnel. It can be one of the following two types: - IKE negotiated - Manually installed | ||||
| CjnxIpSecRemotePeerType | 1.3.6.1.4.1.2636.3.22.1.3.1.1.11 | JnxRemotePeerType | RO | |
column · JnxRemotePeerType · read-only · current The type of the remote peer gateway (endpoint). It can be one
of the following two types:
- static (Remote peer whose IP address is known beforehand)
- dynamic (Remote peer whose IP address is not known
beforehand) | ||||
| CjnxIpSecTunMtu | 1.3.6.1.4.1.2636.3.22.1.3.1.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current MTU value of this Phase-2 tunnel. | ||||
| CjnxIpSecTunOutEncryptedBytes | 1.3.6.1.4.1.2636.3.22.1.3.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current Number of bytes encrypted by this Phase-2 tunnel. | ||||
| CjnxIpSecTunOutEncryptedPkts | 1.3.6.1.4.1.2636.3.22.1.3.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current Number of packets encrypted by this Phase-2 tunnel. | ||||
| CjnxIpSecTunInDecryptedBytes | 1.3.6.1.4.1.2636.3.22.1.3.1.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current Number of bytes decrypted by this Phase-2 tunnel. | ||||
| CjnxIpSecTunInDecryptedPkts | 1.3.6.1.4.1.2636.3.22.1.3.1.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current Number of packets decrypted by this Phase-2 tunnel. | ||||
| CjnxIpsSecTunAHInBytes | 1.3.6.1.4.1.2636.3.22.1.3.1.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current Number of incoming bytes authenticated using AH by this Phase-2 tunnel. | ||||
| CjnxIpsSecTunAHInPkts | 1.3.6.1.4.1.2636.3.22.1.3.1.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current Number of incoming packets authenticated using AH by this Phase-2 tunnel. | ||||
| CjnxIpsSecTunAHOutBytes | 1.3.6.1.4.1.2636.3.22.1.3.1.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current Number of outgoing bytes applied AH by this Phase-2 tunnel. | ||||
| CjnxIpsSecTunAHOutPkts | 1.3.6.1.4.1.2636.3.22.1.3.1.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current Number of outgoing packets applied AH by this Phase-2 tunnel. | ||||
| CjnxIpSecTunReplayDropPkts | 1.3.6.1.4.1.2636.3.22.1.3.1.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current Number of packets dropped by this Phase-2 tunnel due to anti replay check failure. | ||||
| CjnxIpSecTunAhAuthFails | 1.3.6.1.4.1.2636.3.22.1.3.1.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current Number of packets received by this Phase-2 tunnel that failed AH authentication. | ||||
| CjnxIpSecTunEspAuthFails | 1.3.6.1.4.1.2636.3.22.1.3.1.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current Number of packets received by this Phase-2 tunnel that failed ESP authentication. | ||||
| CjnxIpSecTunDecryptFails | 1.3.6.1.4.1.2636.3.22.1.3.1.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current Number of packets received by this Phase-2 tunnel that failed decryption. | ||||
| CjnxIpSecTunBadHeaders | 1.3.6.1.4.1.2636.3.22.1.3.1.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current Number of packets received by this Phase-2 tunnel that failed due to bad headers. | ||||
| CjnxIpSecTunBadTrailers | 1.3.6.1.4.1.2636.3.22.1.3.1.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current Number of packets received by this Phase-2 tunnel that failed due to bad ESP trailers. | ||||
| CjnxIpSecTunDroppedPkts | 1.3.6.1.4.1.2636.3.22.1.3.1.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of dropped packets for this Phase-2 tunnel. | ||||
| TjnxIpSecSaTable | 1.3.6.1.4.1.2636.3.22.1.3.2 | NA | ||
table · not-accessible · current The IPsec Phase-2 Security Association Table.
This table identifies the structure (in terms of
component SAs) of each active Phase-2 IPsec tunnel.
This table contains an entry for each active and
expiring security association and maps each entry
in the active Phase-2 tunnel table (ipSecTunTable)
into a number of entries in this table. The index of this
table reflects the
<destination-address, protocol, spi>
rule for identifying Security Associations. | ||||
| RjnxIpSecSaEntry | 1.3.6.1.4.1.2636.3.22.1.3.2.1 | NA | ||
row · not-accessible · current Each entry contains the attributes associated with active and expiring IPsec Phase-2 security associations. | ||||
| CjnxIpSecSaProtocol | 1.3.6.1.4.1.2636.3.22.1.3.2.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The index, represents the security protocol (AH, ESP or IPComp) for which this security association was setup.
| ||||
| CjnxIpSecSaIndex | 1.3.6.1.4.1.2636.3.22.1.3.2.1.2 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index, in the context of the IPsec tunnel ipSecTunIndex, of the security association represented by this table entry. The value of this index is a number which begins at one and is incremented with each SPI associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647. | ||||
| CjnxIpSecSaInSpi | 1.3.6.1.4.1.2636.3.22.1.3.2.1.3 | JnxSpi | RO | |
column · JnxSpi · read-only · current The value of the incoming SPI. | ||||
| CjnxIpSecSaOutSpi | 1.3.6.1.4.1.2636.3.22.1.3.2.1.4 | JnxSpi | RO | |
column · JnxSpi · read-only · current The value of the outgoing SPI. | ||||
| CjnxIpSecSaInAuxSpi | 1.3.6.1.4.1.2636.3.22.1.3.2.1.5 | JnxSpi | RO | |
column · JnxSpi · read-only · current The value of the incoming auxiliary SPI. This is valid for AH and ESP bundles. | ||||
| CjnxIpSecSaOutAuxSpi | 1.3.6.1.4.1.2636.3.22.1.3.2.1.6 | JnxSpi | RO | |
column · JnxSpi · read-only · current The value of the outgoing auxiliary SPI. This is valid for AH and ESP bundles. | ||||
| CjnxIpSecSaType | 1.3.6.1.4.1.2636.3.22.1.3.2.1.7 | JnxSAType | RO | |
column · JnxSAType · read-only · current This field represents the type of security associations which can be either manual or dynamic | ||||
| CjnxIpSecSaEncapMode | 1.3.6.1.4.1.2636.3.22.1.3.2.1.8 | JnxEncapMode | RO | |
column · JnxEncapMode · read-only · current The encapsulation mode used by an IPsec Phase-2 Tunnel. | ||||
| CjnxIpSecSaLifeSize | 1.3.6.1.4.1.2636.3.22.1.3.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes. | ||||
| CjnxIpSecSaLifeTime | 1.3.6.1.4.1.2636.3.22.1.3.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds. | ||||
| CjnxIpSecSaActiveTime | 1.3.6.1.4.1.2636.3.22.1.3.2.1.11 | TimeInterval | RO | |
column · TimeInterval · read-only · current The length of time the IPsec Phase-2 Tunnel has been active in seconds. | ||||
| CjnxIpSecSaLifeSizeThreshold | 1.3.6.1.4.1.2636.3.22.1.3.2.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The security association LifeSize refresh threshold in kilobytes. | ||||
| CjnxIpSecSaLifeTimeThreshold | 1.3.6.1.4.1.2636.3.22.1.3.2.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The security association LifeTime refresh threshold in seconds. | ||||
| CjnxIpSecSaEncryptAlgo | 1.3.6.1.4.1.2636.3.22.1.3.2.1.14 | JnxEncryptAlgo | RO | |
column · JnxEncryptAlgo · read-only · current The Encryption algorithm used to encrypt the packets which can be either es-cbc or 3des-cbc. | ||||
| CjnxIpSecSaAuthAlgo | 1.3.6.1.4.1.2636.3.22.1.3.2.1.15 | JnxAuthAlgo | RO | |
column · JnxAuthAlgo · read-only · current The algorithm used for authentication of packets which can be hmac-md5-96 or hmac-sha1-96 | ||||
| CjnxIpSecSaState | 1.3.6.1.4.1.2636.3.22.1.3.2.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current This column represents the status of the security association represented by this table entry. If the status of the SA is 'active', the SA is ready for active use. The status 'expiring' represents any of the various states that the security association transitions through before being purged.
| ||||
Textual conventions
JnxIkeNegStateINTEGERmatured(1)notmatured(2)State of the Phase-1 IKE negotiation.
JnxSpiUnsigned32 (256..4294967295)The type of the SPI associated with IPsec Phase-2 security associations.