Juniper-ROUTER-MIB
Juniper Networks/UnisphereThe Router MIB is used to manage the creation and deletion as well as the administrative states of the protocols and functions that run within a designated router.
snmptranslate -m Juniper-ROUTER-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-ROUTER-MIB <host> 1.3.6.1.4.1.4874.2.2.32Imports
| Juniper-IP-POLICY-MIB | JuniIpPolicyExtendedCommunity, JuniIpPolicyName |
|---|---|
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniName |
| SNMP-FRAMEWORK-MIB | SnmpEngineID |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniRouterMIB | 1.3.6.1.4.1.4874.2.2.32 | |||
identity The Router MIB is used to manage the creation and deletion as well as the administrative states of the protocols and functions that run within a designated router. | ||||
| NjuniRouterObjects | 1.3.6.1.4.1.4874.2.2.32.1 | |||
| SjuniRouterNextRouterIndex | 1.3.6.1.4.1.4874.2.2.32.1.1 | JuniNextRouterIndex | RO | |
scalar · JuniNextRouterIndex · read-only · current Coordinates routerIndex and juniRouterVrfIndex value allocation for entries in the juniRouterTable and juniRouterVrfTable, respectively. A GET of this object returns the next available routerIndex value to be used to create an entry in the associated router table; or zero, if no valid routerIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that routerIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | ||||
| TjuniRouterTable | 1.3.6.1.4.1.4874.2.2.32.1.2 | NA | ||
table · not-accessible · current This table contains entries for routers present in the system. | ||||
| RjuniRouterEntry | 1.3.6.1.4.1.4874.2.2.32.1.2.1 | NA | ||
row · not-accessible · current Each entry in this table represents a single router. Creating and/or deleting entries in this table causes corresponding entries to be created or deleted in the juniRouterProtocolTable. Note that VRFs also appear as entries in this table and can be differentiated by the juniRouterVrf object. The juniRouterVrfTable shows the parent / child relationship between routers and VRFs present in the system.
| ||||
| CjuniRouterIndex | 1.3.6.1.4.1.4874.2.2.32.1.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The routerIndex of this router. When creating entries in this table, suitable values for this object are determined by reading juniRouterNextRouterIndex. | ||||
| CjuniRouterName | 1.3.6.1.4.1.4874.2.2.32.1.2.1.2 | JuniName | RC | |
column · JuniName · read-create · current The administratively assigned name given to this router. The name must be unique within the context of this table and cannot be changed after the router instance is created. | ||||
| CjuniRouterRowStatus | 1.3.6.1.4.1.4874.2.2.32.1.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniRouterRowStatus
juniRouterName
In addition, when creating an entry the following conditions must hold:
A value for juniRouterIndex must have been determined previously by
reading juniRouterNextRouterIndex.
A corresponding entries in juniRouterProtocolTable are created/destroyed
as a result of creating/destroying an entry in this table. | ||||
| CjuniRouterVrf | 1.3.6.1.4.1.4874.2.2.32.1.2.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Identifies whether this router is a VRF or not. A value of true(1) indicates that this is a VRF; a value of false(2) indicates that it is not. | ||||
| CjuniRouterContextName | 1.3.6.1.4.1.4874.2.2.32.1.2.1.5 | OCTET STRING (SIZE (7..14)) | RO | |
column · OCTET STRING (SIZE (7..14)) · read-only · current An internally derived/assigned name given to this router with a
specific format:
routerN
where N is a decimal number (with no leading zeroes) in the range
1..16777215 corresponding to the value of the least significant 24 bits
of the juniRouterIndex (the router UID). The name is unique within the
context of this table. | ||||
| CjuniRouterContextEngineID | 1.3.6.1.4.1.4874.2.2.32.1.2.1.6 | SnmpEngineID | RO | |
column · SnmpEngineID · read-only · current The virtual router SNMP engine's administratively-unique identifier. This is used as the contextEngineId to reach the virtual router's SNMP context via the system-wide SNMP engine using SNMPv3. | ||||
| CjuniRouterSummaryVRFCount | 1.3.6.1.4.1.4874.2.2.32.1.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of VRFs contained in the VR. | ||||
| TjuniRouterProtocolTable | 1.3.6.1.4.1.4874.2.2.32.1.3 | NA | ||
table · not-accessible · current This table contains entries for each protocol supported by the router entry created in the juniRouterTable. | ||||
| RjuniRouterProtocolEntry | 1.3.6.1.4.1.4874.2.2.32.1.3.1 | NA | ||
row · not-accessible · current Each entry provides administrative control on a router protocol for the router designated by the first indice to this table. The second indice identifies the router protocol. Entries in this table are created as a side-effect of row creation in the juniRouterTable or juniRouterVrfTable. | ||||
| CjuniRouterProtocolRouterIndex | 1.3.6.1.4.1.4874.2.2.32.1.3.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The routerIndex of this router. This object is the same as the juniRouterIndex object defined in the juniRouterTable. | ||||
| CjuniRouterProtocolProtocolIndex | 1.3.6.1.4.1.4874.2.2.32.1.3.1.2 | JuniRouterProtocolIndex | NA | |
column · JuniRouterProtocolIndex · not-accessible · current Identities the router protocol. | ||||
| CjuniRouterProtocolRowStatus | 1.3.6.1.4.1.4874.2.2.32.1.3.1.3 | RowStatus | RW | |
column · RowStatus · read-write · current Administrative control and status of a protocol on a router.
The following values can be read from this object:
active(1) - Indicates that the protocol on the designated router
is created, configured, and running.
notReady(3) - Indicates that the protocol requires additional
configuration in a protocol specific MIB module.
Examples include the BGP and OSPF protocols, which
require additional configuration of protocol specific
parameters such as: Autonomous System (AS) for BGP,
and Process Id for OSPF.
destroy(6) - The destroy(3) operation can fail if there are
executing applications dependent on the protocol.
If an attempt is made to destroy(6) an active(1)
protocol that other applications are dependent on,
the rowStatus will read destroy(6). Normally, when
a row is destroyed, the agent will cleaup and remove
the entry.
The following values can be written to this object:
active(1) - Activate protocol on the designated router.
createAndGo(4) - Create protocol on designated router. The router
indicated by juniRouterProtocolRouterIndex must
already exist in the juniRouterTable. The value of
the juniRouterProtocolProtocolIndex must be from the
set of protocol values defined by the
JuniRouterProtocolIndex type.
destroy(6) - Destroy protocol on designated router. If the
operation is successful, the agent will remove the
entry. If the operation failed, the row will remain
in the table with a rowStatus value of destroy(6).
Conditions on destroy(6):
1) The default router can not be deleted.
2) The local router can not be deleted. A local router is defined
as the router that sourced the SNMP request.
Upon creation of a router in the juniRouterTable, some protocol entries
will appear in this table by default, which indicates that these
protocols are created by the action of creating a router. It is
important to note, that this behavior may change over time by protocol
type. | ||||
| TjuniRouterVrfTable | 1.3.6.1.4.1.4874.2.2.32.1.4 | NA | ||
table · not-accessible · current This table contains entries for each VRF on each router entry created in the juniRouterTable. | ||||
| RjuniRouterVrfEntry | 1.3.6.1.4.1.4874.2.2.32.1.4.1 | NA | ||
row · not-accessible · current Each entry provides administrative control on a router VRF for the router designated by the first indice of this table. The second indice identifies the router VRF. The parent router must exist in the juniRouterTable before performing VRF row creation in this table | ||||
| CjuniRouterVrfRouterIndex | 1.3.6.1.4.1.4874.2.2.32.1.4.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The router index of this router, also referred to as the parent of the VRF. This object is the same as the juniRouterIndex object defined in the juniRouterTable. | ||||
| CjuniRouterVrfRouterVrfIndex | 1.3.6.1.4.1.4874.2.2.32.1.4.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The VRF router index for this entry, also referred as the child of the parent router, which is identified by the first indice to this table. | ||||
| CjuniRouterVrfIpv4UnicastImportRouteMap | 1.3.6.1.4.1.4874.2.2.32.1.4.1.3 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current The VRF router import route map for IPv4 unicast routes. | ||||
| CjuniRouterVrfIpv4UnicastExportRouteMap | 1.3.6.1.4.1.4874.2.2.32.1.4.1.4 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current The VRF router export route map for IPv4 unicast routes. | ||||
| CjuniRouterVrfRouteDistinguisher | 1.3.6.1.4.1.4874.2.2.32.1.4.1.5 | JuniIpPolicyExtendedCommunity | RC | |
column · JuniIpPolicyExtendedCommunity · read-create · current The VRF router route distinguisher. | ||||
| CjuniRouterVrfRowStatus | 1.3.6.1.4.1.4874.2.2.32.1.4.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
*** LIMITED CONFIGURATION LEVEL ***
RowStatus createAndGo/destroy operations have the following
special-purpose semantics:
createAndGo Create an entry having the specified configuration
and append it to the target list, i.e. create an
juniRouterVrfEntry table entry with the associated
characteristics.
destroy Destroy the specified element.
Entries in this table can be modified once the row has been created.
To create an entry in this table, the following entry objects MUST be
explicitly configured:
A value for juniRouterVrfRouterIndex must have been determined
previously by reading juniRouterNextRouterIndex.
A parent router must exist in the juniRouterTable. | ||||
| CjuniRouterVrfRouterName | 1.3.6.1.4.1.4874.2.2.32.1.4.1.8 | JuniName | RC | |
column · JuniName · read-create · current The administratively assigned name given to this VRF router. The name must be unique within the context of this table and cannot be changed after the router instance is created. | ||||
| CjuniRouterVrfRouterDescription | 1.3.6.1.4.1.4874.2.2.32.1.4.1.9 | DisplayString (SIZE (0..80)) | RC | |
column · DisplayString (SIZE (0..80)) · read-create · current The administratively assigned description given to this VRF router. | ||||
| CjuniRouterVrfIpv4UnicastGlobalExportRouteMap | 1.3.6.1.4.1.4874.2.2.32.1.4.1.10 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current The VRF router global export route map for IPv4 unicast routes. | ||||
| CjuniRouterVrfIpv4UnicastExportRouteMapFilter | 1.3.6.1.4.1.4874.2.2.32.1.4.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current Is the VRF export map for IPv4 unicast routes allowed to filter routes? | ||||
| CjuniRouterVrfIpv6UnicastImportRouteMap | 1.3.6.1.4.1.4874.2.2.32.1.4.1.12 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current The VRF router import route map for IPv6 unicast routes. | ||||
| CjuniRouterVrfIpv6UnicastExportRouteMap | 1.3.6.1.4.1.4874.2.2.32.1.4.1.13 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current The VRF router export route map for IPv6 unicast routes. | ||||
| CjuniRouterVrfIpv6UnicastGlobalExportRouteMap | 1.3.6.1.4.1.4874.2.2.32.1.4.1.14 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current The VRF router global export route map for IPv6 unicast routes. | ||||
| CjuniRouterVrfIpv6UnicastExportRouteMapFilter | 1.3.6.1.4.1.4874.2.2.32.1.4.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current Is the VRF export map for IPv6 unicast routes allowed to filter routes? | ||||
| CjuniRouterVrfIpv4UnicastGlobalImportRouteMap | 1.3.6.1.4.1.4874.2.2.32.1.4.1.16 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current The VRF router global import route map for IPv4 unicast routes. | ||||
| CjuniRouterVrfIpv4UnicastGlobalImportMaxRoutes | 1.3.6.1.4.1.4874.2.2.32.1.4.1.17 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The maximum number of IPv4 unicast routes which can be globaly imported. | ||||
| CjuniRouterVrfIpv6UnicastGlobalImportRouteMap | 1.3.6.1.4.1.4874.2.2.32.1.4.1.18 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current The VRF router global import route map for IPv6 unicast routes. | ||||
| CjuniRouterVrfIpv6UnicastGlobalImportMaxRoutes | 1.3.6.1.4.1.4874.2.2.32.1.4.1.19 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The maximum number of IPv6 unicast routes which can be globaly imported. | ||||
| TjuniRouterVrfRouteTargetTable | 1.3.6.1.4.1.4874.2.2.32.1.5 | NA | ||
table · not-accessible · current This table contains entries for each route target for the router/VRF entry created in the juniRouterTable and juniRouterVrfTable. | ||||
| RjuniRouterVrfRouteTargetEntry | 1.3.6.1.4.1.4874.2.2.32.1.5.1 | NA | ||
row · not-accessible · current Each entry provides administrative control on VRF route targets for the router/VRF pair designated by the first and second indice of this table. The third indice identifies the route target. The parent router must exist in the juniRouterTable and the VRF router must exist in the juniRouterVrfTable before performing creation of the route target in this table. | ||||
| CjuniRouterVrfRouteTargetRouterIndex | 1.3.6.1.4.1.4874.2.2.32.1.5.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The routerIndex of this router, also referred to as the parent of the VRF. This object is the same as the juniRouterIndex object defined in the juniRouterTable. | ||||
| CjuniRouterVrfRouteTargetRouterVrfIndex | 1.3.6.1.4.1.4874.2.2.32.1.5.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The VRF router index for this entry, also referred as the child of the parent router, which is identified by the first indice to this table. | ||||
| CjuniRouterVrfRouteTargetAddrFormat | 1.3.6.1.4.1.4874.2.2.32.1.5.1.3 | INTEGER | NA | |
column · INTEGER · not-accessible · current The address format of the route target.
| ||||
| CjuniRouterVrfRouteTargetRouteTarget | 1.3.6.1.4.1.4874.2.2.32.1.5.1.4 | JuniIpPolicyExtendedCommunity | NA | |
column · JuniIpPolicyExtendedCommunity · not-accessible · current The VRF router route target. | ||||
| CjuniRouterVrfRouteTargetType | 1.3.6.1.4.1.4874.2.2.32.1.5.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The VRF router route target type.
| ||||
| CjuniRouterVrfRouteTargetRowStatus | 1.3.6.1.4.1.4874.2.2.32.1.5.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
*** LIMITED CONFIGURATION LEVEL ***
RowStatus createAndGo/destroy operations have the following
special-purpose semantics:
createAndGo Create an entry having the specified configuration
and append it to the target list, i.e., create an
juniRouterVrfRouteTargetEntry table entry with the
associated characteristics.
destroy Destroy the specified element.
To create an entry in this table, the following entry objects MUST be
explicitly configured:
A parent router must exist in the juniRouterTable.
A VRF router must exist in the juniRouterVrfTable. | ||||
| NjuniRouterSummaryCounts | 1.3.6.1.4.1.4874.2.2.32.1.6 | |||
| NjuniRouterSummaryScalars | 1.3.6.1.4.1.4874.2.2.32.1.6.1 | |||
| SjuniRouterSummaryNonParentVRsConfigured | 1.3.6.1.4.1.4874.2.2.32.1.6.1.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of VRs without VRFs configured. | ||||
| SjuniRouterSummaryParentVRsConfigured | 1.3.6.1.4.1.4874.2.2.32.1.6.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of VRs with VRFs configured. | ||||
| SjuniRouterSummaryVRFsConfigured | 1.3.6.1.4.1.4874.2.2.32.1.6.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of VRFs configured. | ||||
| SjuniRouterSummaryTotalConfigured | 1.3.6.1.4.1.4874.2.2.32.1.6.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of Virtual Routers and VRFs configured. | ||||
| NjuniRouterConformance | 1.3.6.1.4.1.4874.2.2.32.4 | |||
| NjuniRouterCompliances | 1.3.6.1.4.1.4874.2.2.32.4.1 | |||
| MjuniRouterCompliance | 1.3.6.1.4.1.4874.2.2.32.4.1.1 | obsolete | ||
compliance · obsolete An obsolete compliance statement for entities which implement the Juniper Router MIB. This statement became obsolete when support was added for VRFs within routers.
| ||||
| MjuniRouterCompliance2 | 1.3.6.1.4.1.4874.2.2.32.4.1.2 | obsolete | ||
compliance · obsolete An obsolete compliance statement for entities which implement the Juniper Router MIB. This statement became obsolete when support was added for the router context name.
| ||||
| MjuniRouterCompliance3 | 1.3.6.1.4.1.4874.2.2.32.4.1.3 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper Router MIB. This statement became obsolete when support was added for the router context engine ID.
| ||||
| MjuniRouterCompliance4 | 1.3.6.1.4.1.4874.2.2.32.4.1.4 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper Router MIB. This statement became obsolete when the global export map and the export map filter option were added to the VRF group.
| ||||
| MjuniRouterCompliance5 | 1.3.6.1.4.1.4874.2.2.32.4.1.5 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper Router MIB.
| ||||
| MjuniRouterCompliance6 | 1.3.6.1.4.1.4874.2.2.32.4.1.7 | obsolete | ||
compliance · obsolete Obsolete compliance statement for entities which implement the Juniper Router MIB. | ||||
| MjuniRouterCompliance7 | 1.3.6.1.4.1.4874.2.2.32.4.1.8 | |||
compliance · current The compliance statement for entities which implement the Juniper Router MIB. | ||||
| NjuniRouterGroups | 1.3.6.1.4.1.4874.2.2.32.4.2 | |||
| GjuniRouterGroup | 1.3.6.1.4.1.4874.2.2.32.4.2.1 | obsolete | ||
group · obsolete An obsolete collection of objects providing management of routers and routing protocols in a Juniper product. This group became obsolete when support was added for VRFs within routers. | ||||
| GjuniRouterGroup2 | 1.3.6.1.4.1.4874.2.2.32.4.2.2 | obsolete | ||
group · obsolete An obsolete collection of objects providing management of routers and routing protocols in a Juniper product. This group became obsolete when support was added for the router context name. | ||||
| GjuniRouterVrfGroup | 1.3.6.1.4.1.4874.2.2.32.4.2.3 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of VRFs within routers in a Juniper product. This group became obsolete when the VRF router description object was added. | ||||
| GjuniRouterGroup3 | 1.3.6.1.4.1.4874.2.2.32.4.2.4 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of routers and routing protocols in a Juniper product. This group became obsolete when the contect engine ID object was added. | ||||
| GjuniRouterVrfGroup2 | 1.3.6.1.4.1.4874.2.2.32.4.2.5 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of VRFs within routers in a Juniper product. This group became obsolete when the global export map and the export map filter option were added. | ||||
| GjuniRouterGroup4 | 1.3.6.1.4.1.4874.2.2.32.4.2.6 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of routers and routing protocols in a Juniper product. This group became obsolete when the summaryVRfCount object was added. | ||||
| GjuniRouterVrfGroup3 | 1.3.6.1.4.1.4874.2.2.32.4.2.7 | obsolete | ||
group · obsolete Obsolete collection of objects providing management of VRFs within routers in a Juniper product. This group became obsolete when the global import map was added and when support for separate ipv4 and ipv6 route maps was added.
| ||||
| GjuniRouterGroup5 | 1.3.6.1.4.1.4874.2.2.32.4.2.8 | |||
group · current A collection of objects providing management of routers and routing protocols in a Juniper product. | ||||
| GjuniRouterSummaryScalarsGroup | 1.3.6.1.4.1.4874.2.2.32.4.2.9 | |||
group · current A collection of objects providing summary counts for number of virtual routers and virtual router forwarding instances (VRFs) in a Juniper product. | ||||
| GjuniRouterVrfGroup4 | 1.3.6.1.4.1.4874.2.2.32.4.2.10 | |||
group · current A collection of objects providing management of VRFs within routers in a Juniper product.
| ||||
Textual conventions
JuniNextRouterIndexUnsigned32Coordinates routerIndex value allocation for entries in an associated router table. Clients must first read the routerIndex value from this object, then create an entry having the routerIndex value in the associated router table. The DESCRIPTION clause for an object of this type must identify the associated router table. A GET of this object returns the next available routerIndex value to be used to create an entry in the associated router table; or zero, if no valid routerIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that routerIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. Unless specified otherwise by its MAX-ACCESS and DESCRIPTION clauses, an object of this type is read-only, and a SET of such an object returns a notWritable error.
JuniRouterProtocolIndexINTEGERbgp(7)cops(20)dhcpLocalServer(28)dhcpProxy(15)dhcpRelay(16)dhcpv6LocalServer(31)dvmrp(22)generator(13)icmp(3)igmp(4)ip(1)isis(9)localAddressServer(14)mgtm(21)mpls(25)mplsMgr(27)msdp(24)nameResolver(17)ntp(12)osi(2)ospf(8)pim(23)policyManager(18)radius(26)radiusDisconnect(30)radiusProxy(32)rip(10)snmp(11)sscClient(19)tacacsPlus(29)tcp(5)udp(6)Identifies the router protocol.
Groups and compliance
- juniRouterCompliance
- juniRouterCompliance2
- juniRouterCompliance3
- juniRouterCompliance4
- juniRouterCompliance5
- juniRouterCompliance6
- juniRouterCompliance7
- juniRouterGroup
- juniRouterGroup2
- juniRouterGroup3
- juniRouterGroup4
- juniRouterGroup5
- juniRouterSummaryScalarsGroup
- juniRouterVrfGroup
- juniRouterVrfGroup2
- juniRouterVrfGroup3
- juniRouterVrfGroup4
Used by
- Juniper-AAA-MIB (juniper/junose)
- Juniper-ADDRESS-POOL-MIB (juniper/junose)
- Juniper-DHCP-MIB (juniper/junose)