Juniper-IP-POLICY-MIB
Juniper Networks/UnisphereThe IP Policy MIB for the Juniper Networks enterprise.
snmptranslate -m Juniper-IP-POLICY-MIB -Tpsnmpwalk -v2c -c <community> -m Juniper-IP-POLICY-MIB <host> 1.3.6.1.4.1.4874.2.2.13Imports
| Juniper-MIBs | juniMibs |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IjuniIpPolicyMIB | 1.3.6.1.4.1.4874.2.2.13 | |||
identity The IP Policy MIB for the Juniper Networks enterprise. | ||||
| NjuniIpPolicyObjects | 1.3.6.1.4.1.4874.2.2.13.1 | |||
| NjuniIpAccessList | 1.3.6.1.4.1.4874.2.2.13.1.1 | |||
| TjuniIpAccessListTable | 1.3.6.1.4.1.4874.2.2.13.1.1.1 | NA | ||
table · not-accessible · current This table contains entries for elements of IP access lists. Entries belonging to the same access list are ordered, and comparisons to those entries are performed in that order until a match is detected. If no match is found, the default action is to 'deny'. | ||||
| RjuniIpAccessListEntry | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an IP access list element. | ||||
| CjuniIpAccessListId | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.1 | Integer32 (1..10000) | NA | |
column · Integer32 (1..10000) · not-accessible · current The number of the access list to which this entry belongs. | ||||
| CjuniIpAccessListElemId | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.2 | Integer32 (0..10000) | NA | |
column · Integer32 (0..10000) · not-accessible · current The relative position of this entry within its access list. Access list entries are searched in this sequence (low to high values) until a match is found. NOTE: The value zero is reserved for use with SET operations to perform special-purpose table entry creations/deletions; see the DESCRIPTION of juniIpAccessListRowStatus for details. Get/GetNext/GetBulk retrievals never return an entry for which this object is zero-valued. | ||||
| CjuniIpAccessListRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
Two configuration levels are defined, limited and full. EARLY
IMPLEMENTATIONS MIGHT PROVIDE ONLY THE LIMITED LEVEL OF CONFIGURATION
CAPABILITY.
*** LIMITED ACCESS LIST CONFIGURATION LEVEL ***
1) RowStatus createAndGo/destroy operations directed to a target table
entry for which juniIpAccessListElemId is ZERO, have the following
special-purpose semantics:
createAndGo Create an entry having the specified
configuration and append it to the target list,
i.e. assign it a value of juniIpAccessListElemId
that is one greater than the current last
element in the list.
destroy Destroy the specified list and all of its
constituent elements.
2) RowStatus createAndGo/destroy operations directed to a target table
entry for which juniIpAccessListElemId is NONZERO are disallowed.
*** FULL ACCESS LIST CONFIGURATION LEVEL ***
Permit conventional RowStatus-based management of table entries having a
nonzero value for juniIpAccessListElemId, IN ADDITION TO the special
RowStatus semantics applied to entries having a zero value for
juniIpAccessListElemId.
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpAccessListRowStatus
In addition, when creating an entry the following conditions must hold:
The value of juniIpAccessListElemId is nonzero.
Once created, element attributes cannot be modified except by a
RowStatus destroy operation to delete the list element. | ||||
| CjuniIpAccessListAction | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.4 | JuniIpPolicyPolicy | RC | |
column · JuniIpPolicyPolicy · read-create · current Specifies the disposition of an item that matches the comparison criteria described by this entry. | ||||
| CjuniIpAccessListSrc | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current A source IP address. A subject IP address is first masked with the value of juniIpAccessListSrcMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any source IP address. | ||||
| CjuniIpAccessListSrcMask | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.6 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address mask to be applied to a subject source IP address before comparing it to juniIpAccessListSrc. Ones in the mask identify which bits in the subject IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask. | ||||
| CjuniIpAccessListDst | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.7 | IpAddress | RC | |
column · IpAddress · read-create · current A destination IP address. A subject IP address is first masked with the value of juniIpAccessListDstMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any destination IP address. | ||||
| CjuniIpAccessListDstMask | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.8 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address mask to be applied to a subject destination IP address before comparing it to juniIpAccessListDst. Ones in the mask identify which bits in the IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask. | ||||
| CjuniIpAccessListProtocol | 1.3.6.1.4.1.4874.2.2.13.1.1.1.1.9 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current An IP Protocol value. Nonzero values match a specific IP Protocol value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as a wildcard, matching any IP Protocol. | ||||
| NjuniIpNamedAccessList | 1.3.6.1.4.1.4874.2.2.13.1.2 | |||
| TjuniIpNamedAccessListTable | 1.3.6.1.4.1.4874.2.2.13.1.2.1 | NA | ||
table · not-accessible · current This table contains entries for elements of IP access lists. Entries belonging to the same access list are ordered, and comparisons to those entries are performed in that order until a match is detected. If no match is found, the default action is to 'deny'. | ||||
| RjuniIpNamedAccessListEntry | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an IP access list element. | ||||
| CjuniIpNamedAccessListName | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.1 | JuniIpPolicyName | NA | |
column · JuniIpPolicyName · not-accessible · current The name of the access list to which this entry belongs. | ||||
| CjuniIpNamedAccessListElemId | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.2 | Integer32 (0..10000) | NA | |
column · Integer32 (0..10000) · not-accessible · current The relative position of this entry within its access list. Access list entries are searched in this sequence (low to high values) until a match is found. NOTE: The value zero is reserved for use with SET operations to perform special-purpose table entry creations/deletions; see the DESCRIPTION of juniIpNamedAccessListRowStatus for details. Get/GetNext/GetBulk retrievals never return an entry for which this object is zero-valued. | ||||
| CjuniIpNamedAccessListRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
Two configuration levels are defined, limited and full. EARLY
IMPLEMENTATIONS MIGHT PROVIDE ONLY THE LIMITED LEVEL OF CONFIGURATION
CAPABILITY.
*** LIMITED ACCESS LIST CONFIGURATION LEVEL ***
1) RowStatus createAndGo/destroy operations directed to a target table
entry for which juniIpNamedAccessListElemId is ZERO, have the
following special-purpose semantics:
createAndGo Create an entry having the specified
configuration and append it to the target list,
i.e. assign it a value of
juniIpNamedAccessListElemId that is one greater
than the current last element in the list.
destroy Destroy the specified list and all of its
constituent elements.
2) RowStatus createAndGo/destroy operations directed to a target table
entry for which juniIpNamedAccessListElemId is NONZERO are
disallowed.
*** FULL ACCESS LIST CONFIGURATION LEVEL ***
Permit conventional RowStatus-based management of table entries having a
nonzero value for juniIpNamedAccessListElemId, IN ADDITION TO the
special RowStatus semantics applied to entries having a zero value for
juniIpNamedAccessListElemId.
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpNamedAccessListRowStatus
In addition, when creating an entry the following conditions must hold:
The value of juniIpNamedAccessListElemId is nonzero.
Once created, element attributes cannot be modified except by a
RowStatus destroy operation to delete the list element. | ||||
| CjuniIpNamedAccessListAction | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.4 | JuniIpPolicyPolicy | RC | |
column · JuniIpPolicyPolicy · read-create · current Specifies the disposition of an item that matches the comparison criteria described by this entry. | ||||
| CjuniIpNamedAccessListSrc | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current A source IP address. A subject IP address is first masked with the value of juniIpNamedAccessListSrcMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any source IP address. | ||||
| CjuniIpNamedAccessListSrcMask | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.6 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address mask to be applied to a subject source IP address before comparing it to juniIpNamedAccessListSrc. Ones in the mask identify which bits in the subject IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask. | ||||
| CjuniIpNamedAccessListDst | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.7 | IpAddress | RC | |
column · IpAddress · read-create · current A destination IP address. A subject IP address is first masked with the value of juniIpNamedAccessListDstMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any destination IP address. | ||||
| CjuniIpNamedAccessListDstMask | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.8 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address mask to be applied to a subject destination IP address before comparing it to juniIpNamedAccessListDst. Ones in the mask identify which bits in the IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask. | ||||
| CjuniIpNamedAccessListProtocol | 1.3.6.1.4.1.4874.2.2.13.1.2.1.1.9 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current An IP Protocol value. Nonzero values match a specific IP Protocol value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as a wildcard, matching any IP Protocol. | ||||
| NjuniIpAspAccessList | 1.3.6.1.4.1.4874.2.2.13.1.3 | |||
| TjuniIpAspAccessTable | 1.3.6.1.4.1.4874.2.2.13.1.3.1 | NA | ||
table · not-accessible · current This table contains entries for elements of IP AS-Path access entries. | ||||
| RjuniIpAspAccessEntry | 1.3.6.1.4.1.4874.2.2.13.1.3.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an IP AS-Path access element. | ||||
| CjuniIpAspAccessName | 1.3.6.1.4.1.4874.2.2.13.1.3.1.1.1 | JuniIpPolicyName | NA | |
column · JuniIpPolicyName · not-accessible · current The name of the AS-Path Access List to which this entry belongs. | ||||
| CjuniIpAspAccessElemId | 1.3.6.1.4.1.4874.2.2.13.1.3.1.1.2 | Integer32 (0..10000) | NA | |
column · Integer32 (0..10000) · not-accessible · current The element ID portion of the IP AS-Path for this entry. | ||||
| CjuniIpAspAccessCreatedInternally | 1.3.6.1.4.1.4874.2.2.13.1.3.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicated whether this entry was created internally by the system, or dynamically via a management interface. A true value for this object indicates that this entry was created internally; false indicates externally. | ||||
| CjuniIpAspAccessPolicy | 1.3.6.1.4.1.4874.2.2.13.1.3.1.1.4 | JuniIpPolicyPolicy | RC | |
column · JuniIpPolicyPolicy · read-create · current Indicates the action to take for this AS-Path access list. | ||||
| CjuniIpAspAccessExpression | 1.3.6.1.4.1.4874.2.2.13.1.3.1.1.5 | OCTET STRING (SIZE (1..256)) | RC | |
column · OCTET STRING (SIZE (1..256)) · read-create · current The AS-Path access list expression for this entry. | ||||
| CjuniIpAspAccessRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.3.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpCommunityRowStatus
In addition, when creating an entry the following conditions must hold:
Once created, only certain attributes can be modified. | ||||
| NjuniIpPrefixList | 1.3.6.1.4.1.4874.2.2.13.1.4 | |||
| TjuniIpPrefixListTable | 1.3.6.1.4.1.4874.2.2.13.1.4.1 | NA | ||
table · not-accessible · current This table contains entries for elements of IP prefix lists. Entries belonging to the same prefix list are ordered, and comparisons to those entries are performed in that order until a match is detected. If no match is found, the default action is to 'deny'. | ||||
| RjuniIpPrefixListEntry | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an IP prefix list element. | ||||
| CjuniIpPrefixListName | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.1 | JuniIpPolicyName | NA | |
column · JuniIpPolicyName · not-accessible · current The name of the prefix list to which this entry belongs. | ||||
| CjuniIpPrefixListElemId | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.2 | Integer32 (0..10000) | NA | |
column · Integer32 (0..10000) · not-accessible · current The relative position of this entry within its prefix list. Access list entries are searched in this sequence (low to high values) until a match is found. | ||||
| CjuniIpPrefixListIpAddress | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP Address portion of the IP List value for this entry. | ||||
| CjuniIpPrefixListLength | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.4 | Integer32 (0..32) | NA | |
column · Integer32 (0..32) · not-accessible · current The length portion of the IP List value for this entry. | ||||
| CjuniIpPrefixListPolicy | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.5 | JuniIpPolicyPolicy | RC | |
column · JuniIpPolicyPolicy · read-create · current The IP Prefix list action to perform for this entry. | ||||
| CjuniIpPrefixListGeValue | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.6 | Integer32 (0..32) | RC | |
column · Integer32 (0..32) · read-create · current The minimum prefix length to apply to address. | ||||
| CjuniIpPrefixListLeValue | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.7 | Integer32 (0..32) | RC | |
column · Integer32 (0..32) · read-create · current The maximum prefix length to apply to address. | ||||
| CjuniIpPrefixListDescription | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.8 | DisplayString | RC | |
column · DisplayString · read-create · current The administratively assigned description for this entry. | ||||
| CjuniIpPrefixListHitCount | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of hits for this entry. | ||||
| CjuniIpPrefixListRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.4.1.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpPrefixListRowStatus
In addition, when creating an entry the following conditions must hold:
The value of juniIpPrefixListElemId is nonzero.
Once created, only certain attributes can be modified. | ||||
| NjuniIpPrefixTree | 1.3.6.1.4.1.4874.2.2.13.1.5 | |||
| TjuniIpPrefixTreeTable | 1.3.6.1.4.1.4874.2.2.13.1.5.1 | NA | ||
table · not-accessible · current This table contains entries for elements of IP prefix trees. Entries belonging to the same prefix tree are ordered, and comparisons to those entries are performed in that order until a match is detected. If no match is found, the default action is to 'deny'. | ||||
| RjuniIpPrefixTreeEntry | 1.3.6.1.4.1.4874.2.2.13.1.5.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an IP prefix tree element. | ||||
| CjuniIpPrefixTreeName | 1.3.6.1.4.1.4874.2.2.13.1.5.1.1.1 | JuniIpPolicyName | NA | |
column · JuniIpPolicyName · not-accessible · current The name of the prefix tree to which this entry belongs. | ||||
| CjuniIpPrefixTreeIpAddress | 1.3.6.1.4.1.4874.2.2.13.1.5.1.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP Address portion of the IP Prefix value for this entry. | ||||
| CjuniIpPrefixTreeLength | 1.3.6.1.4.1.4874.2.2.13.1.5.1.1.3 | Integer32 (0..32) | NA | |
column · Integer32 (0..32) · not-accessible · current The length portion of the IP Prefix value for this entry. | ||||
| CjuniIpPrefixTreePolicy | 1.3.6.1.4.1.4874.2.2.13.1.5.1.1.4 | JuniIpPolicyPolicy | RC | |
column · JuniIpPolicyPolicy · read-create · current The IP Prefix tree policy perform for this entry. | ||||
| CjuniIpPrefixTreeDescription | 1.3.6.1.4.1.4874.2.2.13.1.5.1.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current The administratively assigned description for this entry. | ||||
| CjuniIpPrefixTreeHitCount | 1.3.6.1.4.1.4874.2.2.13.1.5.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of hits for this entry. | ||||
| CjuniIpPrefixTreeRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.5.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpPrefixTreeRowStatus
In addition, when creating an entry the following conditions must hold:
The value of juniIpPrefixTreeIpAddress and juniIpPrefixTreeLength
are nonzero.
Once created, only certain attributes can be modified. | ||||
| NjuniIpCommunityList | 1.3.6.1.4.1.4874.2.2.13.1.6 | |||
| TjuniIpCommunityListTable | 1.3.6.1.4.1.4874.2.2.13.1.6.1 | NA | ||
table · not-accessible · current This table contains entries for elements of IP Community Lists. Entries belonging to the same Community List are ordered. The table supports standard and extended community lists. | ||||
| RjuniIpCommunityListEntry | 1.3.6.1.4.1.4874.2.2.13.1.6.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an IP Community List element. | ||||
| CjuniIpCommunityListName | 1.3.6.1.4.1.4874.2.2.13.1.6.1.1.1 | JuniIpPolicyName | NA | |
column · JuniIpPolicyName · not-accessible · current The name of the Community List to which this entry belongs. | ||||
| CjuniIpCommunityListElemId | 1.3.6.1.4.1.4874.2.2.13.1.6.1.1.2 | Integer32 (0..10000) | NA | |
column · Integer32 (0..10000) · not-accessible · current The IP Address portion of the IP Prefix value for this entry. | ||||
| CjuniIpCommunityListCreatedInternally | 1.3.6.1.4.1.4874.2.2.13.1.6.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicated whether this entry was created internally by the system, or dynamically via a management interface. A true value for this object indicates that this entry was created internally; false indicates externally. | ||||
| CjuniIpCommunityListExtended | 1.3.6.1.4.1.4874.2.2.13.1.6.1.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates whether this entry is a standard or extended Community List. True indicates extended, false indicates standard | ||||
| CjuniIpCommunityListPolicy | 1.3.6.1.4.1.4874.2.2.13.1.6.1.1.5 | JuniIpPolicyPolicy | RC | |
column · JuniIpPolicyPolicy · read-create · current Indicates the policy action to perform for this list. | ||||
| CjuniIpCommunityListExpression | 1.3.6.1.4.1.4874.2.2.13.1.6.1.1.6 | OCTET STRING (SIZE (1..256)) | RC | |
column · OCTET STRING (SIZE (1..256)) · read-create · current The community list expression for this entry. | ||||
| CjuniIpCommunityListRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.6.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpCommunityRowStatus
In addition, when creating an entry the following conditions must hold:
Once created, only certain attributes can be modified. | ||||
| TjuniIpExtCommunityListTable | 1.3.6.1.4.1.4874.2.2.13.1.6.2 | NA | ||
table · not-accessible · current This table contains entries for Extended IP Community Lists. Entries belonging to the same Extended Community List are ordered. | ||||
| RjuniIpExtCommunityListEntry | 1.3.6.1.4.1.4874.2.2.13.1.6.2.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an Extended IP Community List element. | ||||
| CjuniIpExtCommunityListName | 1.3.6.1.4.1.4874.2.2.13.1.6.2.1.1 | JuniIpPolicyName | NA | |
column · JuniIpPolicyName · not-accessible · current The name of the Extended Community List to which this entry belongs. | ||||
| CjuniIpExtCommunityListElemId | 1.3.6.1.4.1.4874.2.2.13.1.6.2.1.2 | Integer32 (0..10000) | NA | |
column · Integer32 (0..10000) · not-accessible · current The element ID value for this entry. | ||||
| CjuniIpExtCommunityListCreatedInternally | 1.3.6.1.4.1.4874.2.2.13.1.6.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicated whether this entry was created internally by the system, or dynamically via a management interface. A true value for this object indicates that this entry was created internally; false indicates externally. | ||||
| CjuniIpExtCommunityListPolicy | 1.3.6.1.4.1.4874.2.2.13.1.6.2.1.4 | JuniIpPolicyPolicy | RC | |
column · JuniIpPolicyPolicy · read-create · current Indicates the policy action to perform for this list. | ||||
| CjuniIpExtCommunityListExpression | 1.3.6.1.4.1.4874.2.2.13.1.6.2.1.5 | OCTET STRING (SIZE (8..256)) | RC | |
column · OCTET STRING (SIZE (8..256)) · read-create · current The extended community list expression for this entry. | ||||
| CjuniIpExtCommunityListRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.6.2.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpExtCommunityRowStatus
In addition, when creating an entry the following conditions must hold:
The value of juniIpExtCommunityListElemId is included in this table
as a key for future use. It must be the value zero.
Once created, only certain attributes can be modified. | ||||
| NjuniIpRedistributeList | 1.3.6.1.4.1.4874.2.2.13.1.7 | |||
| TjuniIpDynRedistributeTable | 1.3.6.1.4.1.4874.2.2.13.1.7.1 | NA | ||
table · not-accessible · current This table contains entries for elements of IP Dynamic Route Redistribution elements. | ||||
| RjuniIpDynRedistributeEntry | 1.3.6.1.4.1.4874.2.2.13.1.7.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of a dynamic IP Route Redistribute element. | ||||
| CjuniIpDynRedistributeToProtocol | 1.3.6.1.4.1.4874.2.2.13.1.7.1.1.1 | JuniIpDynRedistributeProtocol | NA | |
column · JuniIpDynRedistributeProtocol · not-accessible · current Identifies the protocol associated with this Dynamic Route Redistribution element that routes are redistributed to. | ||||
| CjuniIpDynRedistributeState | 1.3.6.1.4.1.4874.2.2.13.1.7.1.1.2 | JuniIpPolicyAdminStatus | RC | |
column · JuniIpPolicyAdminStatus · read-create · current Indicates the enable/disable state of this redistribution element. | ||||
| CjuniIpDynRedistributeRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.7.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpDynRedistributeRowStatus
Once created, only the juniIpDynRedistributeState object can be
modified. | ||||
| TjuniIpRedistributeTable | 1.3.6.1.4.1.4874.2.2.13.1.7.2 | NA | ||
table · not-accessible · current This table contains entries for elements of IP Route Redistribution elements. | ||||
| RjuniIpRedistributeEntry | 1.3.6.1.4.1.4874.2.2.13.1.7.2.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an IP Route Redistribution element. | ||||
| CjuniIpRedistributeToProtocol | 1.3.6.1.4.1.4874.2.2.13.1.7.2.1.1 | JuniIpRedistributeProtocol | NA | |
column · JuniIpRedistributeProtocol · not-accessible · current Identifies the protocol for this element that routes are redistributed to. | ||||
| CjuniIpRedistributeFromProtocol | 1.3.6.1.4.1.4874.2.2.13.1.7.2.1.2 | JuniIpRedistributeProtocol | NA | |
column · JuniIpRedistributeProtocol · not-accessible · current Identifies the protocol for this element that routes are redistributed from. | ||||
| CjuniIpRedistributeState | 1.3.6.1.4.1.4874.2.2.13.1.7.2.1.3 | JuniIpPolicyAdminStatus | RC | |
column · JuniIpPolicyAdminStatus · read-create · current Indicates the enable/disable state of this redistribution element. | ||||
| CjuniIpRedistributeRouteMapName | 1.3.6.1.4.1.4874.2.2.13.1.7.2.1.4 | JuniIpPolicyName | RC | |
column · JuniIpPolicyName · read-create · current Identifies the IP route-map associated with this IP Route Redistribution element. | ||||
| CjuniIpRedistributeRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.7.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpRedistributeRowStatus
juniIpRedistributeRouteMapName
Once created, only the juniIpRedistributeState object can be modified. | ||||
| NjuniIpRouteMapTree | 1.3.6.1.4.1.4874.2.2.13.1.8 | |||
| TjuniIpRouteMapTable | 1.3.6.1.4.1.4874.2.2.13.1.8.1 | NA | ||
table · not-accessible · current This table contains entries for elements of IP Route Maps. | ||||
| RjuniIpRouteMapEntry | 1.3.6.1.4.1.4874.2.2.13.1.8.1.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of an IP Route Map element. | ||||
| CjuniIpRouteMapName | 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.1 | JuniIpPolicyName | NA | |
column · JuniIpPolicyName · not-accessible · current The name of the route map to which this entry belongs. | ||||
| CjuniIpRouteMapSequenceNum | 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.2 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current The element ID value for this entry. | ||||
| CjuniIpRouteMapElemId | 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.3 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current The element ID to which this entry belongs. | ||||
| CjuniIpRouteMapSubElemId | 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.4 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current The sub-element ID to which this entry belongs. | ||||
| CjuniIpRouteMapCreatedInternally | 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Indicated whether this entry was created internally by the system, or dynamically via a management interface. A true value for this object indicates that this entry was created internally; false indicates externally. | ||||
| CjuniIpRouteMapPolicy | 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.6 | JuniIpPolicyPolicy | RO | |
column · JuniIpPolicyPolicy · read-only · current Indicates the policy action performed by this element. | ||||
| CjuniIpRouteMapDisplay | 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.7 | OCTET STRING (SIZE (0..2048)) | RO | |
column · OCTET STRING (SIZE (0..2048)) · read-only · current Textual information taken from the NVT ASCII character set (i.e. RFC1903 DisplayString), but with increased length. The information in this object is the series of set, match, and/or match & set clauses for this route map. It is assumed that the information conveyed in this object is used for display purposes and in general, is not parsed. The information in this string is a concatentation of routemap clauses configured via the systems non SNMP interface. | ||||
| TjuniIpRouteMapV2Table | 1.3.6.1.4.1.4874.2.2.13.1.8.2 | NA | ||
table · not-accessible · current This table contains entries for route maps instances. | ||||
| RjuniIpRouteMapV2Entry | 1.3.6.1.4.1.4874.2.2.13.1.8.2.1 | NA | ||
row · not-accessible · current Each entry is a specific instance of the Route Map. | ||||
| CjuniIpRouteMapV2Name | 1.3.6.1.4.1.4874.2.2.13.1.8.2.1.1 | JuniIpPolicyName | NA | |
column · JuniIpPolicyName · not-accessible · current The name of the route map to which this instance entry belongs. | ||||
| CjuniIpRouteMapV2SequenceNum | 1.3.6.1.4.1.4874.2.2.13.1.8.2.1.2 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Multiple instances of the same route map can be created by assigning a different sequence number to it. Each instance is identified by the route map name and the sequence number. The value of the sequence number associated with the particular route map instance determines the order in which the routing protocol evaluates routes; the instance of having lowest sequence number is evaluated first. If the routes pass all the match conditions specified in the lowest-numbered instance, and if all set clause elements are successfully configured, then no other instance of the route map is considered. However, any routes that do not pass all the match conditions are evaluated against the next instance of the route map. | ||||
| CjuniIpRouteMapV2Policy | 1.3.6.1.4.1.4874.2.2.13.1.8.2.1.3 | JuniIpPolicyPolicy | RC | |
column · JuniIpPolicyPolicy · read-create · current Indicates the policy action performed by this route map instance. | ||||
| CjuniIpRouteMapV2RowStatus | 1.3.6.1.4.1.4874.2.2.13.1.8.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpRouteMapV2RowStatus
To delete an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpRouteMapV2RowStatus
Once created, juniIpRouteMapV2Policy attribute can be modified.
To modify juniIpRouteMapV2Policy, set juniIpRouteMapV2RowStatus also.
Note: Match, match-set and set clause elements can be configured for a
specific instance of the route map. First create the route map
instance to make use of the same to configure in the clause table.
Deletion of the route map instance will also delete all the clause
elements confgured for that instance as clause elements are
configured for that instance. | ||||
| TjuniIpRouteMapClauseTable | 1.3.6.1.4.1.4874.2.2.13.1.8.3 | NA | ||
table · not-accessible · current This table contains entries for instances of the route map clause elements. | ||||
| RjuniIpRouteMapClauseEntry | 1.3.6.1.4.1.4874.2.2.13.1.8.3.1 | NA | ||
row · not-accessible · current Each entry describes the characteristics of one route map clause element instance. | ||||
| CjuniIpRouteMapClauseElemId | 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The clause element selection option. Select the appropriate element option to configure each element instance of match, match-set and set clauses. For the complete configuration map table refer to the juniIpRouteMapClauseRowStatus object's DESCRIPTION.
| ||||
| CjuniIpRouteMapClauseSubElemId | 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.2 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The clause element sub ID used to distinguish specific instance of the element. This value is determined by choosing the next available by walking the table. | ||||
| CjuniIpRouteMapClauseElemIdAddon | 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This represents clause element instance add-on option selected along with the main option (juniIpRouteMapClauseElemId) whenever it applies. For more information on how to map this object value to each value, refer to the mapping table in the juniIpRouteMapClauseRowStatus object's DESCRIPTION.
| ||||
| CjuniIpRouteMapClauseElementValue | 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.4 | DisplayString (SIZE (0..100)) | RC | |
column · DisplayString (SIZE (0..100)) · read-create · current This represents set, match-set and match clauses' different element instance values in character string form. Whatever may be the data type of the attribute element instance value, it is always interpreted as a set of characters for both configuration and display purposes. It is up to the user to know the element's data type mapping in order to input the correct value while configuring. Refer to the mapping table in the juniIpRouteMapClauseRowStatus object descrption for detailed information. | ||||
| CjuniIpRouteMapClauseRowStatus | 1.3.6.1.4.1.4874.2.2.13.1.8.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniIpRouteMapClauseElementValue
juniIpRouteMapClauseRowStatus
Additional object juniIpRouteMapClauseElemIdAddon may become OPTIONAL
for some elements creation/deletion along with the above. Refer the
mapping table below to determine which elements are required.
The table entry elements may not be modified. Only create and delete
are allowed.
Note#1: Make sure route map(s) are created before configuring their
corresponding clause elements.
Note#2: The mapping table below is the extensive guide for the options,
values and ranges of the table objects
juniIpRouteMapClauseElemId, juniIpRouteMapClauseElemIdAddon and
juniIpRouteMapClauseElementValue.
Clause element configuration selection mapping table
====================================================
ClauseElemId ClauseElemIdAddon ClauseElementValue
============ ================= ==================
matchAsPath notApplicable DisplayString (SIZE(1..32))
matchCommunity exact/ DisplayString (SIZE(1..32))
notApplicable
matchExtendedCommunity exact/ DisplayString (SIZE(1..32))
notApplicable
Note#3: At a given time only one can be configured for access list and
prefix-list/trees'.
matchAccessList notApplicable DisplayString (SIZE(1..32))
matchPrefixList notApplicable DisplayString (SIZE(1..32))
matchPrefixTree notApplicable DisplayString (SIZE(1..32))
matchNextHop notApplicable DisplayString (SIZE(1..32))
matchNextHopPreList notApplicable DisplayString (SIZE(1..32))
matchNextHopPreTree notApplicable DisplayString (SIZE(1..32))
Note#4: For matchLevel, matchMetricType and matchRouteType element
selection choose the exact case-sensitive string to set the
option.
Example: For matchLevel, option levelOne, levelOneAndTwo, etc.
can be set.
matchLevel notApplicable { levelOne,
levelOneAndTwo,
levelTwo,
backbone,
stubArea }
matchMetricType notApplicable { internal or typeOne,
external or typeTwo }
matchRouteType notApplicable { external,
internal,
internalInter,
internalIntra }
matchDistance notApplicable Integer32 (0..255)
matchMetric notApplicable Unsigned32
matchTag notApplicable Unsigned32
matchPolicyList notApplicable DisplayString (SIZE(1..32))
setAsPath notApplicable DisplayString (SIZE(1..32))
setCommunityAdd notApplicable DisplayString (SIZE(1..32))
setCommList delete/ DisplayString (SIZE(1..32))
notApplicable
setCommunity notApplicable DisplayString (SIZE(1..32))
Note#5: For below elements selection choose the exact case-sensitive
string to set the option.
Example: For setOrigin, egp or igp or incomplete will be the
valid options to select.
setAutoTag notApplicable { autoTag }
setCommunityNone notApplicable { communityNone }
Note#6: setCommunityCreateList and setCommunityCreateListAdd will have
only one instance and all will be set in one instance of the
element (either setCommunityCreateList or
setCommunityCreateListAdd), i.e., all options and values will
aggregate in one SubElementId.
setCommunityCreateList notApplicable Unsigned32
setCommunityCreateListAdd notApplicable Unsigned32
setCommunityCreateList notApplicable { none,
localAs,
noAdvertise,
noExport }
setCommunityCreateListAdd notApplicable { none,
localAs,
noAdvertise,
noExport }
setLevel notApplicable { backbone,
levelOne,
levelOneAndTwo,
levelTwo,
stubArea }
setRouteType notApplicable { external,
internal,
internalInter,
internalIntra }
setNextHopPeerAddr notApplicable { peerAddress }
setMetricType notApplicable { external,
internal }
setOrigin notApplicable { egp,
igp,
incomplete }
setAsPathCreateList notApplicable Interger32 (1..65535)
setTag notApplicable Unsigned32
setWeight notApplicable Unsigned32
setDistance notApplicable Interger32 (1..255)
setLocalPref notApplicable Unsigned32
setMetric relativeNeg/ Unsigned32
relativePos/
notApplicable
Note#7: setExtendedCommunityCreate and setExtendedCommunityCreateAdd
will have only one instance and all will be set in one instance
of the element (either setExtendedCommunityCreate or
setExtendedCommunityCreateAdd) i.e. all options and values will
aggregate in one SubElementId.
setExtendedCommunityCreate extCommRt/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreate extCommSoo/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreateAdd extCommRt/ IPADDRESS:Unsigned32 or
notApplicable IPADDRESS-in-ASN:Unsigned32
setExtendedCommunityCreateAdd extCommSoo/ IPADDRESS:Unsigned32
notApplicable IPADDRESS-in-ASN:Unsigned32
Note#8: Damping element has only one instance at any given time. It can
be deleted by just refering to the instance (elementID and
subElementId) without refering the exact value; i.e., while
deleting, values doesn't matter.
setDampingCreate notApplicable
1. HalfLifeiTime-Interger32 (1..45)
2. RtSuppressTime-Interger32 (1..20000)
3. SuppressedRtReuseTime-Interger32 (1..20000)
4. MaxRtSuppressTime-Interger32 (1..255)
5. UnreachableRtHalfLifeTime-Interger32 (1..45)
Note#9: 1, 2, 3 and 4 values are MUST values to be specified (in
minutes) for route flap damping and 5th one is optional. Format
for specifying the values are very rigid and strict. Always
specify four MUST values. The first value shouldn't be preceded
with space characters and last the value always should be
followed with one space character. From first value to till
last value, all the values will be separated from each other by
one space character.
setNextHop interfaceValue/ Unsigned32
notApplicable
setNextHop ipAddress/ IPADDRESS
notApplicable | ||||
| NjuniIpPolicyConformance | 1.3.6.1.4.1.4874.2.2.13.4 | |||
| NjuniIpPolicyCompliances | 1.3.6.1.4.1.4874.2.2.13.4.1 | |||
| MjuniIpPolicyCompliance | 1.3.6.1.4.1.4874.2.2.13.4.1.1 | obsolete | ||
compliance · obsolete An obsolete compliance statement for entities that implement the Juniper IP Policy MIB. This statement became obsolete when support was added for the IP Named Access List.
| ||||
| MjuniIpPolicyCompliance2 | 1.3.6.1.4.1.4874.2.2.13.4.1.2 | obsolete | ||
compliance · obsolete An obsolete compliance statement for entities that implement the Juniper IP Policy MIB. This statement became obsolete when support was added for the IP ASP Access List, the IP Prefix List, the IP Prefix Tree, the IP Community List, the IP Extended Community List, IP Dynamic Route Redistribution, and the IP Route Map. | ||||
| MjuniIpPolicyCompliance3 | 1.3.6.1.4.1.4874.2.2.13.4.1.3 | |||
compliance · current An obsolete compliance statement for entities that implement the Juniper IP Policy MIB. This statement became obsolete when support was added for the IP Route Map configurations. | ||||
| MjuniIpPolicyCompliance4 | 1.3.6.1.4.1.4874.2.2.13.4.1.4 | |||
compliance · current The compliance statement for entities that implement the Juniper IP Policy MIB. | ||||
| NjuniIpPolicyGroups | 1.3.6.1.4.1.4874.2.2.13.4.2 | |||
| GjuniIpAccessListGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.1 | |||
group · current A collection of objects for managing IP access list capabilities in a Juniper product. | ||||
| GjuniIpNamedAccessListGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.2 | |||
group · current A named collection of objects for managing IP access list capabilities in a Juniper product. | ||||
| GjuniIpAspAccessListGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.3 | |||
group · current A named collection of objects for managing AS-Path access list capabilities in a Juniper product. | ||||
| GjuniIpPrefixListGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.4 | |||
group · current A named collection of objects for managing Prefix list capabilities in a Juniper product. | ||||
| GjuniIpPrefixTreeGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.5 | |||
group · current A named collection of objects for managing Prefix Tree capabilities in a Juniper product. | ||||
| GjuniIpCommunityListGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.6 | |||
group · current A named collection of objects for managing Community List capabilities in a Juniper product. | ||||
| GjuniIpExtCommunityListGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.7 | |||
group · current A named collection of objects for managing Extended Community List capabilities in a Juniper product. | ||||
| GjuniIpRedistributeGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.8 | |||
group · current A collection of objects for managing IP route redistribution list capabilities in a Juniper product. | ||||
| GjuniIpRouteMapGroup | 1.3.6.1.4.1.4874.2.2.13.4.2.9 | obsolete | ||
group · obsolete A collection of objects for managing IP route map list capabilities in a Juniper product. | ||||
| GjuniIpRouteMapGroup2 | 1.3.6.1.4.1.4874.2.2.13.4.2.10 | |||
group · current A collection of objects for managing IP route map list capabilities in a Juniper product. | ||||
Textual conventions
JuniIpDynRedistributeProtocolINTEGERipRedistrProtocolBgp(6)ipRedistrProtocolConnected(5)ipRedistrProtocolDefaultRoute(17)ipRedistrProtocolDvmrp(11)ipRedistrProtocolDvmrpAggregate(12)ipRedistrProtocolHidden(13)ipRedistrProtocolIsis(1)ipRedistrProtocolMBgp(7)ipRedistrProtocolOspf(3)ipRedistrProtocolOspfExtern(10)ipRedistrProtocolOspfIntern(9)ipRedistrProtocolOwnerAccess(14)ipRedistrProtocolOwnerAccessInternal(15)ipRedistrProtocolOwnerDialout(16)ipRedistrProtocolRip(2)ipRedistrProtocolStatic(4)ipRedistrProtocolStaticLow(8)The set of protocols choices used to configure to/from settings in an IP Dynamic Route Redistribution element.
JuniIpPolicyAdminStatusINTEGERipPolicyAdminStateDisable(0)ipPolicyAdminStateEnable(1)The administratively assigned management state for an IP route policy.
JuniIpPolicyExtendedCommunityOCTET STRING (SIZE (0..22))Display hint:
22aThe extended community specification. Represents textual information taken from the NVT ASCII character set. The format of the text string is defined by either one of these choices: In: ASN::nn where ASN is a 16 bit decimal number and nn is a 32 bit decimal number Or: IP-address::nn where IP-address is in dotted decimal format and nn is a 16 bit decimal numberJuniIpPolicyNameOCTET STRING (SIZE (0..32))Display hint:
32aIP access list name. Represents textual information taken from the NVT ASCII character set.
JuniIpPolicyPolicyINTEGERdeny(1)permit(0)The set of IP policy actions.
JuniIpRedistributeProtocolINTEGERipRedistrProtocolAccess(9)ipRedistrProtocolAccessInternal(10)ipRedistrProtocolBgp(2)ipRedistrProtocolConnected(7)ipRedistrProtocolDefaultRoute(8)ipRedistrProtocolDialout(12)ipRedistrProtocolDvmrp(11)ipRedistrProtocolIsis(5)ipRedistrProtocolLdpUcast(15)ipRedistrProtocolMBgp(3)ipRedistrProtocolOspf(4)ipRedistrProtocolOspfM(13)ipRedistrProtocolRip(6)ipRedistrProtocolStatic(1)ipRedistrProtocolStaticMcast(14)The set of protocols choices used to configure to/from settings in an IP Redistribution element.
Groups and compliance
- juniIpAccessListGroup
- juniIpAspAccessListGroup
- juniIpCommunityListGroup
- juniIpExtCommunityListGroup
- juniIpNamedAccessListGroup
- juniIpPolicyCompliance
- juniIpPolicyCompliance2
- juniIpPolicyCompliance3
- juniIpPolicyCompliance4
- juniIpPrefixListGroup
- juniIpPrefixTreeGroup
- juniIpRedistributeGroup
- juniIpRouteMapGroup
- juniIpRouteMapGroup2