InterSeptor-MIB
Jacarta Ltd.snmptranslate -m InterSeptor-MIB -Tpsnmpwalk -v2c -c <community> -m InterSeptor-MIB <host> 1.3.6.1.4.1.19011Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Njacarta | 1.3.6.1.4.1.19011 | ||||||||||||||||
| Nproduct | 1.3.6.1.4.1.19011.1 | ||||||||||||||||
| NwebAppliance | 1.3.6.1.4.1.19011.1.3 | ||||||||||||||||
| NinSept | 1.3.6.1.4.1.19011.1.3.1 | ||||||||||||||||
| NinSeptObjects | 1.3.6.1.4.1.19011.1.3.1.1 | ||||||||||||||||
| NinSeptIdent | 1.3.6.1.4.1.19011.1.3.1.1.1 | ||||||||||||||||
| SinSeptIdentManufacturer | 1.3.6.1.4.1.19011.1.3.1.1.1.1 | DisplayString (SIZE (0..31)) | RO | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..31)) · read-only · mandatory The name of the interSeptor manufacturer. | |||||||||||||||||
| SinSeptIdentModel | 1.3.6.1.4.1.19011.1.3.1.1.1.2 | DisplayString (SIZE (0..63)) | RO | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · mandatory The interSeptor Model designation. | |||||||||||||||||
| SinSeptIdentAgentSoftwareVersion | 1.3.6.1.4.1.19011.1.3.1.1.1.3 | DisplayString (SIZE (0..31)) | RO | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..31)) · read-only · mandatory The interSeptor software/firmware version. | |||||||||||||||||
| SinSeptIdentName | 1.3.6.1.4.1.19011.1.3.1.1.1.4 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · mandatory A string identifying the interSeptor. This object should be set by the administrator. | |||||||||||||||||
| NinSeptConfig | 1.3.6.1.4.1.19011.1.3.1.1.2 | ||||||||||||||||
| SinSeptConfigMibVersion | 1.3.6.1.4.1.19011.1.3.1.1.2.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The version of MIB spec. | |||||||||||||||||
| NinSeptConfigNetwork | 1.3.6.1.4.1.19011.1.3.1.1.2.2 | ||||||||||||||||
| SinSeptConfigIpAddress | 1.3.6.1.4.1.19011.1.3.1.1.2.2.1 | IpAddress | RW | mandatory | |||||||||||||
scalar · IpAddress · read-write · mandatory The ip address that NMS can identify the managed device | |||||||||||||||||
| SinSeptConfigGateway | 1.3.6.1.4.1.19011.1.3.1.1.2.2.2 | IpAddress | RW | mandatory | |||||||||||||
scalar · IpAddress · read-write · mandatory The default gateway that allows the device to be managed through routers | |||||||||||||||||
| SinSeptConfigSubnetMask | 1.3.6.1.4.1.19011.1.3.1.1.2.2.3 | IpAddress | RW | mandatory | |||||||||||||
scalar · IpAddress · read-write · mandatory Internet address subnet mask | |||||||||||||||||
| NinSeptConfigDateTime | 1.3.6.1.4.1.19011.1.3.1.1.2.3 | ||||||||||||||||
| SinSeptConfigDate | 1.3.6.1.4.1.19011.1.3.1.1.2.3.1 | DisplayString (SIZE (10)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (10)) · read-write · mandatory The date in inSept, format is (dd/mm/yyyy) | |||||||||||||||||
| SinSeptConfigTime | 1.3.6.1.4.1.19011.1.3.1.1.2.3.2 | DisplayString (SIZE (8)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (8)) · read-write · mandatory The time in interSeptor, format is (hh:mm:ss) | |||||||||||||||||
| SinSeptConfigTimeFromNtp | 1.3.6.1.4.1.19011.1.3.1.1.2.3.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable update date/time from NTP server.
| |||||||||||||||||
| SinSeptConfigNtpIpAddress | 1.3.6.1.4.1.19011.1.3.1.1.2.3.4 | IpAddress | RW | mandatory | |||||||||||||
scalar · IpAddress · read-write · mandatory NTP IP address. | |||||||||||||||||
| SinSeptConfigNtpTimeZone | 1.3.6.1.4.1.19011.1.3.1.1.2.3.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable update date/time from NTP server.
| |||||||||||||||||
| SinSeptConfigDayLightSaving | 1.3.6.1.4.1.19011.1.3.1.1.2.3.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable daylight saving for NTP time, if enabled, the time get from NTP will be set set one hour in advance to reflect daylight saving status.
| |||||||||||||||||
| NinSeptConfigLog | 1.3.6.1.4.1.19011.1.3.1.1.2.4 | ||||||||||||||||
| SinSeptConfigHistoryLogFrequency | 1.3.6.1.4.1.19011.1.3.1.1.2.4.1 | INTEGER (5..3600) | RW | mandatory | |||||||||||||
scalar · INTEGER (5..3600) · read-write · mandatory The frequency of the update of the history log. The value is in seconds | |||||||||||||||||
| SinSeptConfigExtHistoryLogFrequency | 1.3.6.1.4.1.19011.1.3.1.1.2.4.2 | INTEGER (1..1440) | RW | mandatory | |||||||||||||
scalar · INTEGER (1..1440) · read-write · mandatory The frequency of the update of the extended history log. The value is in seconds | |||||||||||||||||
| SinSeptConfigConfigurationLog | 1.3.6.1.4.1.19011.1.3.1.1.2.4.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable inSept to log parameter change.
| |||||||||||||||||
| SinSeptConfigDhcpStatue | 1.3.6.1.4.1.19011.1.3.1.1.2.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable or disable DHCP/BootP capability
| |||||||||||||||||
| SinSeptConfigPingStatue | 1.3.6.1.4.1.19011.1.3.1.1.2.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable or disable Ping Echo capability
| |||||||||||||||||
| SinSeptConfigTftpStatue | 1.3.6.1.4.1.19011.1.3.1.1.2.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable or disable TFTP network upgrade capability
| |||||||||||||||||
| NinSeptConfigTelnet | 1.3.6.1.4.1.19011.1.3.1.1.2.8 | ||||||||||||||||
| SinSeptConfigTelnetStatue | 1.3.6.1.4.1.19011.1.3.1.1.2.8.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable or disable telnet access
| |||||||||||||||||
| SinSeptConfigTelnetPortNumber | 1.3.6.1.4.1.19011.1.3.1.1.2.8.2 | INTEGER (1..65535) | RW | mandatory | |||||||||||||
scalar · INTEGER (1..65535) · read-write · mandatory Setting the server port of telnet. | |||||||||||||||||
| NinSeptConfigHttp | 1.3.6.1.4.1.19011.1.3.1.1.2.9 | ||||||||||||||||
| SinSeptConfigHttpStatue | 1.3.6.1.4.1.19011.1.3.1.1.2.9.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable or disable HTTP access
| |||||||||||||||||
| SinSeptConfigHttpPortNumber | 1.3.6.1.4.1.19011.1.3.1.1.2.9.2 | INTEGER (1..65535) | RW | mandatory | |||||||||||||
scalar · INTEGER (1..65535) · read-write · mandatory Setting the server port of HTTP. | |||||||||||||||||
| SinSeptConfigHttpSecurity | 1.3.6.1.4.1.19011.1.3.1.1.2.9.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable HTTP access for read-only users
| |||||||||||||||||
| NinSeptConfigSnmp | 1.3.6.1.4.1.19011.1.3.1.1.2.10 | ||||||||||||||||
| SinSeptConfigSnmpStatue | 1.3.6.1.4.1.19011.1.3.1.1.2.10.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable or disable SNMP access
| |||||||||||||||||
| SinSeptConfigSnmpPortNumber | 1.3.6.1.4.1.19011.1.3.1.1.2.10.2 | INTEGER (1..65535) | RW | mandatory | |||||||||||||
scalar · INTEGER (1..65535) · read-write · mandatory Setting the server port of SNMP. | |||||||||||||||||
| NinSeptConfigControl | 1.3.6.1.4.1.19011.1.3.1.1.2.11 | ||||||||||||||||
| SinSeptConfigResetToDefault | 1.3.6.1.4.1.19011.1.3.1.1.2.11.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Reset all parameters of interSeptor to default value
| |||||||||||||||||
| SinSeptConfigRestart | 1.3.6.1.4.1.19011.1.3.1.1.2.11.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Restart interSeptor
| |||||||||||||||||
| NinSeptConfigTrap | 1.3.6.1.4.1.19011.1.3.1.1.2.12 | ||||||||||||||||
| SinSeptConfigTrapRetryCount | 1.3.6.1.4.1.19011.1.3.1.1.2.12.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The count of repeat traps to send to NMS before trap acknowledgement is received. | |||||||||||||||||
| SinSeptConfigTrapRetryTime | 1.3.6.1.4.1.19011.1.3.1.1.2.12.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The time between retrying to send traps to NMS. | |||||||||||||||||
| SinSeptConfigTrapAckSignature | 1.3.6.1.4.1.19011.1.3.1.1.2.12.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The signature of trap acknowledgement. | |||||||||||||||||
| SinSeptConfigPollRate | 1.3.6.1.4.1.19011.1.3.1.1.2.13 | INTEGER (3..60) | RW | mandatory | |||||||||||||
scalar · INTEGER (3..60) · read-write · mandatory The frequency that interSeptor updates readings from sensors (unit : second). | |||||||||||||||||
| TinSeptConfigTrapsReceiversTable | 1.3.6.1.4.1.19011.1.3.1.1.2.14 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A list of managers to send traps to. The number of entries is given by the value of inSeptConfigNumTrapReceivers | |||||||||||||||||
| RinSeptConfigTrapsReceiversEntry | 1.3.6.1.4.1.19011.1.3.1.1.2.14.1 | NA | mandatory | ||||||||||||||
| CinSepttrapsIndex | 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.1 | INTEGER (1..2147483647) | RO | mandatory | |||||||||||||
column · INTEGER (1..2147483647) · read-only · mandatory The index to a trap receiver entry. | |||||||||||||||||
| CinSepttrapsReceiverAddr | 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.2 | IpAddress | RW | mandatory | |||||||||||||
column · IpAddress · read-write · mandatory The IP address of the manager to send a trap to. | |||||||||||||||||
| CinSeptreceiverCommunityString | 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.3 | DisplayString (SIZE (0..19)) | RW | mandatory | |||||||||||||
column · DisplayString (SIZE (0..19)) · read-write · mandatory The community name to use in the trap when sent to the manager. | |||||||||||||||||
| CinSeptreceiverSeverityLevel | 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.4 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory The severity level of traps to be received by this manager.
| |||||||||||||||||
| CinSeptreceiverDescription | 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.5 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · mandatory Description of trap receivers | |||||||||||||||||
| TinSeptConfigAccessControlTable | 1.3.6.1.4.1.19011.1.3.1.1.2.15 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A list of managers which can access interSeptor with private community string. | |||||||||||||||||
| RinSeptConfigAccessControlEntry | 1.3.6.1.4.1.19011.1.3.1.1.2.15.1 | NA | mandatory | ||||||||||||||
| CaccessIndex | 1.3.6.1.4.1.19011.1.3.1.1.2.15.1.1 | INTEGER (1..2147483647) | RO | mandatory | |||||||||||||
column · INTEGER (1..2147483647) · read-only · mandatory The index to a access control entry. | |||||||||||||||||
| CaccessControlAddr | 1.3.6.1.4.1.19011.1.3.1.1.2.15.1.2 | IpAddress | RW | mandatory | |||||||||||||
column · IpAddress · read-write · mandatory The IP address of the manager to access interSeptor | |||||||||||||||||
| CaccessCommunityString | 1.3.6.1.4.1.19011.1.3.1.1.2.15.1.3 | DisplayString (SIZE (0..19)) | RW | mandatory | |||||||||||||
column · DisplayString (SIZE (0..19)) · read-write · mandatory The community name to use in the manager when access interSeptor | |||||||||||||||||
| CaccessControlMode | 1.3.6.1.4.1.19011.1.3.1.1.2.15.1.4 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Access type, only read/Write access type can change parameter of interSeptor
| |||||||||||||||||
| SinSeptConfigTemperatureUnit | 1.3.6.1.4.1.19011.1.3.1.1.2.16 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The temperature unit of the system, can be Celsius or Farenheit
| |||||||||||||||||
| SinSeptConfigDateFormat | 1.3.6.1.4.1.19011.1.3.1.1.2.17 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The date format of the system, can be dd/mm/yyyy or mm/dd/yyyy
| |||||||||||||||||
| NinSeptsensorMonitor | 1.3.6.1.4.1.19011.1.3.1.1.3 | ||||||||||||||||
| SinSeptsensorMonitorSensorNumber | 1.3.6.1.4.1.19011.1.3.1.1.3.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The number of sensors that can be monitored. | |||||||||||||||||
| TinSeptsensorMonitorSensorTable | 1.3.6.1.4.1.19011.1.3.1.1.3.2 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A list of sensor devices to be monitored. | |||||||||||||||||
| RinSeptsensorMonitorSensorEntry | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1 | NA | mandatory | ||||||||||||||
| CinSeptsensorMonitorDeviceIndex | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.1 | INTEGER (1..2147483647) | RO | mandatory | |||||||||||||
column · INTEGER (1..2147483647) · read-only · mandatory The index to a sensor device entry. | |||||||||||||||||
| CinSeptsensorMonitorDeviceStatus | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The device type connected to interSeptor.
| |||||||||||||||||
| CinSeptsensorMonitorDeviceTemperature | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.3 | INTEGER | RO | mandatory | 291 | ||||||||||||
column · INTEGER · read-only · mandatory The temperature of sensor on device interSeptor, the unit is 0.1 degree. Example values from LibreNMS test devices
| |||||||||||||||||
| CinSeptsensorMonitorDeviceTemperatureAlarm | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The alarm type of sensor on device interSeptor.
| |||||||||||||||||
| CinSeptsensorMonitorDeviceHumidity | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.5 | INTEGER | RO | mandatory | 386 | ||||||||||||
column · INTEGER · read-only · mandatory The humidity of sensor on device interSeptor, the unit is 0.1%. Example values from LibreNMS test devices
| |||||||||||||||||
| CinSeptsensorMonitorDeviceHumidityAlarm | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.6 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The alarm type of sensor on device interSeptor.
| |||||||||||||||||
| CinSeptsensorMonitorAlarm1 | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.7 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The device status of sensor 1 connected to interSeptor.
| |||||||||||||||||
| CinSeptsensorMonitorAlarm2 | 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.8 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The device status of sensor 2 connected to interSeptor.
| |||||||||||||||||
| NinSeptsensorConfig | 1.3.6.1.4.1.19011.1.3.1.1.4 | ||||||||||||||||
| SinSeptsensorConfigSensorNumber | 1.3.6.1.4.1.19011.1.3.1.1.4.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The number of sensors that are connected to interSeptor. | |||||||||||||||||
| TinSeptsensorConfigSensorTable | 1.3.6.1.4.1.19011.1.3.1.1.4.2 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A list of sensor devices to be configured. | |||||||||||||||||
| RinSeptsensorConfigSensorEntry | 1.3.6.1.4.1.19011.1.3.1.1.4.2.1 | NA | mandatory | ||||||||||||||
| CinSeptsensorConfigDeviceIndex | 1.3.6.1.4.1.19011.1.3.1.1.4.2.1.1 | INTEGER (1..2147483647) | RO | mandatory | |||||||||||||
column · INTEGER (1..2147483647) · read-only · mandatory The index to a sensor device entry. | |||||||||||||||||
| CinSeptsensorConfigDeviceName | 1.3.6.1.4.1.19011.1.3.1.1.4.2.1.2 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
column · DisplayString (SIZE (0..15)) · read-write · mandatory The name of the sensor device for identification. | |||||||||||||||||
| CinSeptsensorConfigDeviceState | 1.3.6.1.4.1.19011.1.3.1.1.4.2.1.3 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory The setup of sensor device type.
| |||||||||||||||||
| NinSeptsensorConfigSensor1 | 1.3.6.1.4.1.19011.1.3.1.1.4.3 | ||||||||||||||||
| SinSeptsensorConfigSensor1DeviceName | 1.3.6.1.4.1.19011.1.3.1.1.4.3.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The name of sensor device. | |||||||||||||||||
| SinSeptsensorConfigSensor1DeviceState | 1.3.6.1.4.1.19011.1.3.1.1.4.3.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The setup of sensor device type.
| |||||||||||||||||
| NinSeptsensorConfigSensor1Temperature | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3 | ||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureName | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The temperature sensor name. | |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureLowWarning | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set point to trigger low warning alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureLowCritical | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger low critical alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureHighWarning | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger high warning alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureHighCritical | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger high critical alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureHysteresis | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to prevent too many alarms when temperature is hovering around the set threshold. | |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureCalibration | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to get the correct temperature according to your reference temperature.
| |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureLowWarningStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.8 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger low warning alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureLowCriticalStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.9 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger low critical alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureHighWarningStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.10 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger high warning alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor1TemperatureHighCriticalStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.11 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger high critical alarm.
| |||||||||||||||||
| NinSeptsensorConfigSensor1Humidity | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4 | ||||||||||||||||
| SinSeptsensorConfigSensor1HumdityName | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The humidity sensor name. | |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityLowWarning | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set point to trigger low warning alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityLowCritical | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshole to trigger low critical alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityHighWarning | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger high warning alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityHighCritical | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger high critical alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityHysteresis | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to prevent too many alarms when Humidity is hovering around the set threshold. | |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityCalibration | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to get the correct temperature according to your reference temperature.
| |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityLowWarningStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.8 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger low warning alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityLowCriticalStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.9 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger low critical alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityHighWarningStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.10 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger high warning alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor1HumidityHighCriticalStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.11 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger high critical alarm.
| |||||||||||||||||
| NinSeptsensorConfigSensor1Alarm1 | 1.3.6.1.4.1.19011.1.3.1.1.4.3.5 | ||||||||||||||||
| SinSeptsensorConfigSensor1Alarm1Name | 1.3.6.1.4.1.19011.1.3.1.1.4.3.5.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The name of alarm-1. | |||||||||||||||||
| SinSeptsensorConfigSensor1Alarm1State | 1.3.6.1.4.1.19011.1.3.1.1.4.3.5.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Setup the signal type to trigger alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor1Alarm1Hysteresis | 1.3.6.1.4.1.19011.1.3.1.1.4.3.5.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to delay the alarm triggered when event occurs. | |||||||||||||||||
| NinSeptsensorConfigSensor1Alarm2 | 1.3.6.1.4.1.19011.1.3.1.1.4.3.6 | ||||||||||||||||
| SinSeptsensorConfigSensor1Alarm2Name | 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The name of alarm-1. | |||||||||||||||||
| SinSeptsensorConfigSensor1Alarm2State | 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Setup the signal type to trigger alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor1Alarm2Hysteresis | 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to delay the alarm triggered when event occurs. | |||||||||||||||||
| NinSeptsensorConfigSensor2 | 1.3.6.1.4.1.19011.1.3.1.1.4.4 | ||||||||||||||||
| SinSeptsensorConfigSensor2DeviceName | 1.3.6.1.4.1.19011.1.3.1.1.4.4.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The name of sensor device. | |||||||||||||||||
| SinSeptsensorConfigSensor2DeviceState | 1.3.6.1.4.1.19011.1.3.1.1.4.4.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The setup of sensor device type.
| |||||||||||||||||
| NinSeptsensorConfigSensor2Temperature | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3 | ||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureName | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The temperature sensor name. | |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureLowWarning | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set point to trigger low warning alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureLowCritical | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger low critical alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureHighWarning | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger high warning alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureHighCritical | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger high critical alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureHysteresis | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to prevent too many alarms when temperature is hovering around the set threshold. | |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureCalibration | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to get the correct temperature according to your reference temperature.
| |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureLowWarningStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.8 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger low warning alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureLowCriticalStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.9 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger low critical alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureHighWarningStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.10 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger high warning alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor2TemperatureHighCriticalStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.11 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger high critical alarm.
| |||||||||||||||||
| NinSeptsensorConfigSensor2Humidity | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4 | ||||||||||||||||
| SinSeptsensorConfigSensor2HumdityName | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The humidity sensor name. | |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityLowWarning | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set point to trigger low warning alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityLowCritical | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger low critical alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityHighWarning | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger high warning alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityHighCritical | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The threshold to trigger high critical alarm. | |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityHysteresis | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to prevent too many alarms when Humidity is hovering around the set threshold. | |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityCalibration | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to get the correct temperature according to your reference temperature.
| |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityLowWarningStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.8 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger low warning alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityLowCriticalStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.9 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger low critical alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityHighWarningStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.10 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger high warning alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor2HumidityHighCriticalStatus | 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.11 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the set point to trigger high critical alarm.
| |||||||||||||||||
| NinSeptsensorConfigSensor2Alarm1 | 1.3.6.1.4.1.19011.1.3.1.1.4.4.5 | ||||||||||||||||
| SinSeptsensorConfigSensor2Alarm1Name | 1.3.6.1.4.1.19011.1.3.1.1.4.4.5.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The name of alarm-1. | |||||||||||||||||
| SinSeptsensorConfigSensor2Alarm1State | 1.3.6.1.4.1.19011.1.3.1.1.4.4.5.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Setup the signal type to trigger alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor2Alarm1Hysteresis | 1.3.6.1.4.1.19011.1.3.1.1.4.4.5.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to delay the alarm triggered when event occurs. | |||||||||||||||||
| NinSeptsensorConfigSensor2Alarm2 | 1.3.6.1.4.1.19011.1.3.1.1.4.4.6 | ||||||||||||||||
| SinSeptsensorConfigSensor2Alarm2Name | 1.3.6.1.4.1.19011.1.3.1.1.4.4.6.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory The name of alarm-1. | |||||||||||||||||
| SinSeptsensorConfigSensor2Alarm2State | 1.3.6.1.4.1.19011.1.3.1.1.4.4.6.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Setup the signal type to trigger alarm.
| |||||||||||||||||
| SinSeptsensorConfigSensor2Alarm2Hysteresis | 1.3.6.1.4.1.19011.1.3.1.1.4.4.6.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set value to delay the alarm triggered when event occurs. | |||||||||||||||||
| NinSeptTraps | 1.3.6.1.4.1.19011.1.3.1.2 | ||||||||||||||||
| !inSeptCommunicationRestored | 1.3.6.1.4.1.19011.1.3.1.2.0.1 | ||||||||||||||||
notification INFORMATION: Communication between interSeptor and sensor has been established. | |||||||||||||||||
| !inSeptCommunicationLost | 1.3.6.1.4.1.19011.1.3.1.2.0.2 | ||||||||||||||||
notification WARNING: Communication between interSeptor and sensor has been lost. | |||||||||||||||||
| !inSeptAlarm1Inactive | 1.3.6.1.4.1.19011.1.3.1.2.0.3 | ||||||||||||||||
notification INFORMATION: Alarm1 of sensor has returned from active state. | |||||||||||||||||
| !inSeptAlarm1Active | 1.3.6.1.4.1.19011.1.3.1.2.0.4 | ||||||||||||||||
notification WARNING: Alarm1 has become active. | |||||||||||||||||
| !inSeptAlarm2Inactive | 1.3.6.1.4.1.19011.1.3.1.2.0.5 | ||||||||||||||||
notification INFORMATION: Alarm2 of sensor has returned from active state. | |||||||||||||||||
| !inSeptAlarm2Active | 1.3.6.1.4.1.19011.1.3.1.2.0.6 | ||||||||||||||||
notification WARNING: Alarm2 has become active. | |||||||||||||||||
| !inSeptTemperatureNotHighWarning | 1.3.6.1.4.1.19011.1.3.1.2.0.7 | ||||||||||||||||
notification INFORMATION: The temperature of sensor has returned from High warning to normal. | |||||||||||||||||
| !inSeptTemperatureHighWarning | 1.3.6.1.4.1.19011.1.3.1.2.0.8 | ||||||||||||||||
notification WARNING: The temperature of sensor is higher than High warning set point. | |||||||||||||||||
| !inSeptTemperatureNotLowWarning | 1.3.6.1.4.1.19011.1.3.1.2.0.9 | ||||||||||||||||
notification INFORMATION: The temperature of sensor has returned from low warning to normal. | |||||||||||||||||
| !inSeptTemperatureLowWarning | 1.3.6.1.4.1.19011.1.3.1.2.0.10 | ||||||||||||||||
notification WARNING: The temperature of sensor is lower than low warning set point. | |||||||||||||||||
| !inSeptTemperatureNotHighCritical | 1.3.6.1.4.1.19011.1.3.1.2.0.11 | ||||||||||||||||
notification INFORMATION: The temperature of sensor is lower than high critical set point. | |||||||||||||||||
| !inSeptTemperatureHighCritical | 1.3.6.1.4.1.19011.1.3.1.2.0.12 | ||||||||||||||||
notification CRITICAL: The temperature of sensor is higher than high critical set point. | |||||||||||||||||
| !inSeptTemperatureNotLowCritical | 1.3.6.1.4.1.19011.1.3.1.2.0.13 | ||||||||||||||||
notification INFORMATION: The temperature of sensor is higher than low critical set point. | |||||||||||||||||
| !inSeptTemperatureLowCritical | 1.3.6.1.4.1.19011.1.3.1.2.0.14 | ||||||||||||||||
notification CRITICAL: The temperature of sensor is lower than low critical set point. | |||||||||||||||||
| !inSeptHumidityNotHighWarning | 1.3.6.1.4.1.19011.1.3.1.2.0.15 | ||||||||||||||||
notification INFORMATION: The humidity of sensor has returned from High warning to normal. | |||||||||||||||||
| !inSeptHumidityHighWarning | 1.3.6.1.4.1.19011.1.3.1.2.0.16 | ||||||||||||||||
notification WARNING: The humidity of sensor is higher than High warning set point. | |||||||||||||||||
| !inSeptHumidityNotLowWarning | 1.3.6.1.4.1.19011.1.3.1.2.0.17 | ||||||||||||||||
notification INFORMATION: The humidity of sensor has returned from low warning to normal. | |||||||||||||||||
| !inSeptHumidityLowWarning | 1.3.6.1.4.1.19011.1.3.1.2.0.18 | ||||||||||||||||
notification WARNING: The humidity of sensor is lower than low warning set point. | |||||||||||||||||
| !inSeptHumidityNotHighCritical | 1.3.6.1.4.1.19011.1.3.1.2.0.19 | ||||||||||||||||
notification INFORMATION: The humidity of sensor is lower than high critical set point. | |||||||||||||||||
| !inSeptHumidityHighCritical | 1.3.6.1.4.1.19011.1.3.1.2.0.20 | ||||||||||||||||
notification CRITICAL: The humidity of sensor is higher than high critical set point. | |||||||||||||||||
| !inSeptHumidityNotLowCritical | 1.3.6.1.4.1.19011.1.3.1.2.0.21 | ||||||||||||||||
notification INFORMATION: The humidity of sensor is higher than low critical set point. | |||||||||||||||||
| !inSeptHumidityLowCritical | 1.3.6.1.4.1.19011.1.3.1.2.0.22 | ||||||||||||||||
notification CRITICAL: The humidity of sensor is lower than low critical set point. | |||||||||||||||||
Traps / Notifications
- inSeptAlarm1Active
1.3.6.1.4.1.19011.1.3.1.2.0.4 - inSeptAlarm1Inactive
1.3.6.1.4.1.19011.1.3.1.2.0.3 - inSeptAlarm2Active
1.3.6.1.4.1.19011.1.3.1.2.0.6 - inSeptAlarm2Inactive
1.3.6.1.4.1.19011.1.3.1.2.0.5 - inSeptCommunicationLost
1.3.6.1.4.1.19011.1.3.1.2.0.2 - inSeptCommunicationRestored
1.3.6.1.4.1.19011.1.3.1.2.0.1 - inSeptHumidityHighCritical
1.3.6.1.4.1.19011.1.3.1.2.0.20 - inSeptHumidityHighWarning
1.3.6.1.4.1.19011.1.3.1.2.0.16 - inSeptHumidityLowCritical
1.3.6.1.4.1.19011.1.3.1.2.0.22 - inSeptHumidityLowWarning
1.3.6.1.4.1.19011.1.3.1.2.0.18 - inSeptHumidityNotHighCritical
1.3.6.1.4.1.19011.1.3.1.2.0.19 - inSeptHumidityNotHighWarning
1.3.6.1.4.1.19011.1.3.1.2.0.15 - inSeptHumidityNotLowCritical
1.3.6.1.4.1.19011.1.3.1.2.0.21 - inSeptHumidityNotLowWarning
1.3.6.1.4.1.19011.1.3.1.2.0.17 - inSeptTemperatureHighCritical
1.3.6.1.4.1.19011.1.3.1.2.0.12 - inSeptTemperatureHighWarning
1.3.6.1.4.1.19011.1.3.1.2.0.8 - inSeptTemperatureLowCritical
1.3.6.1.4.1.19011.1.3.1.2.0.14 - inSeptTemperatureLowWarning
1.3.6.1.4.1.19011.1.3.1.2.0.10 - inSeptTemperatureNotHighCritical
1.3.6.1.4.1.19011.1.3.1.2.0.11 - inSeptTemperatureNotHighWarning
1.3.6.1.4.1.19011.1.3.1.2.0.7 - inSeptTemperatureNotLowCritical
1.3.6.1.4.1.19011.1.3.1.2.0.13 - inSeptTemperatureNotLowWarning
1.3.6.1.4.1.19011.1.3.1.2.0.9