LUM-WDM-MIB
Nokia (formerly 'Lumentis AB')The WDM trunk interface and protection group MIB. - General - WDM trunk interfaces - WDM passive interfaces - Protection groups
snmptranslate -m LUM-WDM-MIB -Tpsnmpwalk -v2c -c <community> -m LUM-WDM-MIB <host> 1.3.6.1.4.1.8708.1.1.6Imports
| LUM-REG | lumModules, lumWdmMIB |
|---|---|
| LUM-TC | AdminStatusWithNA, BerLevel, BoardOrInterfaceAdminStatus, BoardOrInterfaceOperStatus, CommandString, EnabledDisabledWithNA, FaultStatus, LambdaFrequency, LambdaType, MgmtNameString, ObjectProperty, OperStatusWithNA, PortNumber, PortType, ResetWithNA, SignalFormat, Signed32WithNA, SlotNumber, SubrackNumber, TruthValueWithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TestAndIncr |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IlumWdmMIBModule | 1.3.6.1.4.1.8708.1.1.6 | ||||||||||||||||||||
identity The WDM trunk interface and protection group MIB. - General - WDM trunk interfaces - WDM passive interfaces - Protection groups | |||||||||||||||||||||
| NlumWdmConfs | 1.3.6.1.4.1.8708.2.4.1 | ||||||||||||||||||||
| NlumWdmGroups | 1.3.6.1.4.1.8708.2.4.1.1 | ||||||||||||||||||||
| GwdmGeneralGroup | 1.3.6.1.4.1.8708.2.4.1.1.1 | ||||||||||||||||||||
group · current The general objects. | |||||||||||||||||||||
| GwdmIfGroup | 1.3.6.1.4.1.8708.2.4.1.1.2 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects.
| |||||||||||||||||||||
| GwdmProtGroup | 1.3.6.1.4.1.8708.2.4.1.1.3 | deprecated | |||||||||||||||||||
group · deprecated Note: This group is deprecated. The protection group objects. | |||||||||||||||||||||
| GwdmNotificationGroup | 1.3.6.1.4.1.8708.2.4.1.1.4 | deprecated | |||||||||||||||||||
group · deprecated The WDM notifications. | |||||||||||||||||||||
| GwdmPassiveIfGroup | 1.3.6.1.4.1.8708.2.4.1.1.5 | deprecated | |||||||||||||||||||
group · deprecated The passive i/f group objects. | |||||||||||||||||||||
| GwdmGeneralGroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.6 | deprecated | |||||||||||||||||||
| GwdmIfGroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.7 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V2.
| |||||||||||||||||||||
| GwdmPassiveIfGroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.8 | deprecated | |||||||||||||||||||
group · deprecated The passive i/f group objects V2. | |||||||||||||||||||||
| GwdmIfGroupV3 | 1.3.6.1.4.1.8708.2.4.1.1.9 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V3.
| |||||||||||||||||||||
| GwdmPassiveIfGroupV3 | 1.3.6.1.4.1.8708.2.4.1.1.10 | deprecated | |||||||||||||||||||
group · deprecated The passive i/f group objects V3. | |||||||||||||||||||||
| GwdmIfGroupV4 | 1.3.6.1.4.1.8708.2.4.1.1.11 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V4.
| |||||||||||||||||||||
| GwdmPassiveIfGroupV4 | 1.3.6.1.4.1.8708.2.4.1.1.12 | deprecated | |||||||||||||||||||
group · deprecated The passive i/f group objects V4. | |||||||||||||||||||||
| GwdmIfGroupV5 | 1.3.6.1.4.1.8708.2.4.1.1.13 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V5.
| |||||||||||||||||||||
| GwdmProtGroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.14 | deprecated | |||||||||||||||||||
group · deprecated The protection group objects v2.
| |||||||||||||||||||||
| GwdmIfGroupV6 | 1.3.6.1.4.1.8708.2.4.1.1.15 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V6.
| |||||||||||||||||||||
| GwdmNotificationGroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.16 | ||||||||||||||||||||
group · current The WDM notifications V2. | |||||||||||||||||||||
| GwdmIfGroupV7 | 1.3.6.1.4.1.8708.2.4.1.1.17 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V7.
| |||||||||||||||||||||
| GwdmGeneralGroupV3 | 1.3.6.1.4.1.8708.2.4.1.1.18 | deprecated | |||||||||||||||||||
group · deprecated The WDM general objects v3. | |||||||||||||||||||||
| GwdmIfGroupV8 | 1.3.6.1.4.1.8708.2.4.1.1.19 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V8.
| |||||||||||||||||||||
| GwdmIfGroupV9 | 1.3.6.1.4.1.8708.2.4.1.1.20 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V9.
| |||||||||||||||||||||
| GwdmIfGroupV10 | 1.3.6.1.4.1.8708.2.4.1.1.21 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V10.
| |||||||||||||||||||||
| GwdmIfGroupV11 | 1.3.6.1.4.1.8708.2.4.1.1.22 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V11.
| |||||||||||||||||||||
| GwdmIfGroupV12 | 1.3.6.1.4.1.8708.2.4.1.1.23 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V12. (2.2)
| |||||||||||||||||||||
| GwdmPassiveIfGroupV5 | 1.3.6.1.4.1.8708.2.4.1.1.24 | deprecated | |||||||||||||||||||
group · deprecated The passive i/f group objects V5.
| |||||||||||||||||||||
| GwdmIfGroupV13 | 1.3.6.1.4.1.8708.2.4.1.1.25 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V13. (3.0)
| |||||||||||||||||||||
| GwdmGeneralGroupV4 | 1.3.6.1.4.1.8708.2.4.1.1.26 | deprecated | |||||||||||||||||||
group · deprecated The WDM general objects v4 (3.1). | |||||||||||||||||||||
| GwdmProtGroupV3 | 1.3.6.1.4.1.8708.2.4.1.1.27 | deprecated | |||||||||||||||||||
group · deprecated The protection group objects v3 (3.1).
| |||||||||||||||||||||
| GwdmIfGroupV14 | 1.3.6.1.4.1.8708.2.4.1.1.28 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V14. (4.0)
| |||||||||||||||||||||
| GwdmPassiveIfGroupV6 | 1.3.6.1.4.1.8708.2.4.1.1.29 | ||||||||||||||||||||
group · current The passive i/f group objects V6 (4.0).
| |||||||||||||||||||||
| GwdmProtGroupV4 | 1.3.6.1.4.1.8708.2.4.1.1.30 | deprecated | |||||||||||||||||||
group · deprecated The protection group objects v4 (4.0).
| |||||||||||||||||||||
| GwdmProtGroupV5 | 1.3.6.1.4.1.8708.2.4.1.1.31 | deprecated | |||||||||||||||||||
group · deprecated The protection group objects v5 (4.1).
| |||||||||||||||||||||
| GwdmIfGroupV15 | 1.3.6.1.4.1.8708.2.4.1.1.32 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V15. (5.0)
| |||||||||||||||||||||
| GwdmIfGroupV16 | 1.3.6.1.4.1.8708.2.4.1.1.33 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V16. (6.0)
| |||||||||||||||||||||
| GwdmIfGroupV17 | 1.3.6.1.4.1.8708.2.4.1.1.34 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V17. (9.0)
| |||||||||||||||||||||
| GwdmIfGroupV18 | 1.3.6.1.4.1.8708.2.4.1.1.35 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V18. (9.1)
| |||||||||||||||||||||
| GwdmIfGroupV19 | 1.3.6.1.4.1.8708.2.4.1.1.36 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V19. (10.0)
| |||||||||||||||||||||
| GwdmVc4Group | 1.3.6.1.4.1.8708.2.4.1.1.38 | deprecated | |||||||||||||||||||
group · deprecated The vc4 objects (10.0). | |||||||||||||||||||||
| GwdmGeneralGroupV5 | 1.3.6.1.4.1.8708.2.4.1.1.39 | ||||||||||||||||||||
group · current The WDM general objects v5 (10.0). | |||||||||||||||||||||
| GwdmIfGroupV20 | 1.3.6.1.4.1.8708.2.4.1.1.40 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V20. (11.0)
| |||||||||||||||||||||
| GwdmIfGroupV21 | 1.3.6.1.4.1.8708.2.4.1.1.41 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V21. (12.0)
| |||||||||||||||||||||
| GwdmIfGroupV22 | 1.3.6.1.4.1.8708.2.4.1.1.42 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V22. (13.0)
| |||||||||||||||||||||
| GwdmRemoteProtGroup | 1.3.6.1.4.1.8708.2.4.1.1.43 | ||||||||||||||||||||
group · current The remote protection group objects. (13.0)
| |||||||||||||||||||||
| GwdmProtGroupV6 | 1.3.6.1.4.1.8708.2.4.1.1.44 | ||||||||||||||||||||
group · current The protection group objects v6 (13.0).
| |||||||||||||||||||||
| GwdmCtrlChannelGroup | 1.3.6.1.4.1.8708.2.4.1.1.45 | deprecated | |||||||||||||||||||
group · deprecated The wdm optical control channel objects. (13.0)
| |||||||||||||||||||||
| GwdmCtrlGroupGroup | 1.3.6.1.4.1.8708.2.4.1.1.46 | deprecated | |||||||||||||||||||
group · deprecated The wdm optical control group objects. (13.0)
| |||||||||||||||||||||
| GwdmCtrlGroupGroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.48 | deprecated | |||||||||||||||||||
group · deprecated The wdm optical control group objects. (14.0)
| |||||||||||||||||||||
| GwdmSubChannelGroup | 1.3.6.1.4.1.8708.2.4.1.1.49 | deprecated | |||||||||||||||||||
group · deprecated The wdm subchannel objects. (15.0) | |||||||||||||||||||||
| GwdmGeneralGroupV6 | 1.3.6.1.4.1.8708.2.4.1.1.50 | deprecated | |||||||||||||||||||
group · deprecated The WDM general objects v6 (15.0). | |||||||||||||||||||||
| GwdmIfGroupV23 | 1.3.6.1.4.1.8708.2.4.1.1.51 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V23. (15.0)
| |||||||||||||||||||||
| GwdmVc4GroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.52 | ||||||||||||||||||||
group · current The vc4 objects (16.0).
| |||||||||||||||||||||
| GwdmCtrlChannelGroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.53 | deprecated | |||||||||||||||||||
group · deprecated The wdm optical control channel objects. (16.0)
| |||||||||||||||||||||
| GwdmCtrlGlobalGroup | 1.3.6.1.4.1.8708.2.4.1.1.54 | ||||||||||||||||||||
group · current The wdm optical control general objects. (16.0) | |||||||||||||||||||||
| GwdmSubChannelGroupV2 | 1.3.6.1.4.1.8708.2.4.1.1.55 | ||||||||||||||||||||
group · current The wdm subchannel objects. (16.0) | |||||||||||||||||||||
| GwdmProtGroupV7 | 1.3.6.1.4.1.8708.2.4.1.1.56 | deprecated | |||||||||||||||||||
group · deprecated The protection group objects v6 (17.0).
| |||||||||||||||||||||
| GwdmIfGroupV24 | 1.3.6.1.4.1.8708.2.4.1.1.57 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V24. (17.0)
| |||||||||||||||||||||
| GwdmIfGroupV25 | 1.3.6.1.4.1.8708.2.4.1.1.58 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V25. (18.0)
| |||||||||||||||||||||
| GwdmCtrlChannelGroupV3 | 1.3.6.1.4.1.8708.2.4.1.1.59 | deprecated | |||||||||||||||||||
group · deprecated The wdm optical control channel objects. (19.0)
| |||||||||||||||||||||
| GwdmIfGroupV26 | 1.3.6.1.4.1.8708.2.4.1.1.60 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V26. (20.0)
| |||||||||||||||||||||
| GwdmProtGroupV8 | 1.3.6.1.4.1.8708.2.4.1.1.61 | deprecated | |||||||||||||||||||
group · deprecated The protection group objects v8 (20.0).
| |||||||||||||||||||||
| GwdmProtGroupV9 | 1.3.6.1.4.1.8708.2.4.1.1.62 | ||||||||||||||||||||
group · current The protection group objects v9 (22.0).
| |||||||||||||||||||||
| GwdmCtrlGroupGroupV3 | 1.3.6.1.4.1.8708.2.4.1.1.63 | deprecated | |||||||||||||||||||
group · deprecated The wdm optical control group objects. (23.0)
| |||||||||||||||||||||
| GwdmIfGroupV27 | 1.3.6.1.4.1.8708.2.4.1.1.64 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V27. (23.0)
| |||||||||||||||||||||
| GwdmIfGroupV28 | 1.3.6.1.4.1.8708.2.4.1.1.65 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V28. (23.1)
| |||||||||||||||||||||
| GwdmIfGroupV29 | 1.3.6.1.4.1.8708.2.4.1.1.66 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V29. (25.0)
| |||||||||||||||||||||
| GwdmDelayCompPGGroup | 1.3.6.1.4.1.8708.2.4.1.1.67 | ||||||||||||||||||||
group · current The wdm delay compensation for PG objects. (27.1)
| |||||||||||||||||||||
| GwdmDelayCompLinkGroup | 1.3.6.1.4.1.8708.2.4.1.1.68 | ||||||||||||||||||||
group · current The wdm delay compensation for link objects. (27.1) | |||||||||||||||||||||
| GwdmCtrlChannelGroupV4 | 1.3.6.1.4.1.8708.2.4.1.1.69 | deprecated | |||||||||||||||||||
group · deprecated The wdm optical control channel objects. (28.0)
| |||||||||||||||||||||
| GwdmIfGroupV30 | 1.3.6.1.4.1.8708.2.4.1.1.70 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface objects V30. (28.0)
| |||||||||||||||||||||
| GwdmPassiveIfGroupV7 | 1.3.6.1.4.1.8708.2.4.1.1.71 | ||||||||||||||||||||
group · current The passive i/f group objects V7 (28.0).
| |||||||||||||||||||||
| GwdmMeanChannelPowerControlGroupV1 | 1.3.6.1.4.1.8708.2.4.1.1.72 | ||||||||||||||||||||
group · current The wdm mean channel power control loop objects version 1 (27.0)
| |||||||||||||||||||||
| GwdmMeanChannelPowerControlGlobalGroupV1 | 1.3.6.1.4.1.8708.2.4.1.1.73 | ||||||||||||||||||||
group · current The bogus table used only to create entries in wdmMeanChannelPowerControl v1 (28.0) | |||||||||||||||||||||
| GwdmGeneralGroupV7 | 1.3.6.1.4.1.8708.2.4.1.1.74 | ||||||||||||||||||||
group · current The WDM general objects v7 (28.0).
| |||||||||||||||||||||
| GwdmCtrlGroupGroupV4 | 1.3.6.1.4.1.8708.2.4.1.1.75 | deprecated | |||||||||||||||||||
group · deprecated The wdm optical control group objects. (29.0)
| |||||||||||||||||||||
| GwdmCtrlGroupGroupV5 | 1.3.6.1.4.1.8708.2.4.1.1.76 | ||||||||||||||||||||
group · current The wdm optical control group objects. (R30.0)
| |||||||||||||||||||||
| GwdmCtrlChannelGroupV5 | 1.3.6.1.4.1.8708.2.4.1.1.77 | ||||||||||||||||||||
group · current The wdm optical control channel objects. (30.0)
| |||||||||||||||||||||
| GwdmIfGroupV31 | 1.3.6.1.4.1.8708.2.4.1.1.78 | ||||||||||||||||||||
group · current The wdm trunk interface objects V31. (32.1)
| |||||||||||||||||||||
| NlumWdmCompl | 1.3.6.1.4.1.8708.2.4.1.2 | ||||||||||||||||||||
| MlumWdmBasicComplV1 | 1.3.6.1.4.1.8708.2.4.1.2.1 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB. | |||||||||||||||||||||
| MlumWdmBasicComplV2 | 1.3.6.1.4.1.8708.2.4.1.2.2 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V2. | |||||||||||||||||||||
| MlumWdmBasicComplV3 | 1.3.6.1.4.1.8708.2.4.1.2.3 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V3. | |||||||||||||||||||||
| MlumWdmBasicComplV4 | 1.3.6.1.4.1.8708.2.4.1.2.4 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V4. | |||||||||||||||||||||
| MlumWdmBasicComplV5 | 1.3.6.1.4.1.8708.2.4.1.2.5 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V5. | |||||||||||||||||||||
| MlumWdmBasicComplV6 | 1.3.6.1.4.1.8708.2.4.1.2.6 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V6. | |||||||||||||||||||||
| MlumWdmBasicComplV7 | 1.3.6.1.4.1.8708.2.4.1.2.7 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V7. | |||||||||||||||||||||
| MlumWdmBasicComplV8 | 1.3.6.1.4.1.8708.2.4.1.2.8 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V8. | |||||||||||||||||||||
| MlumWdmBasicComplV9 | 1.3.6.1.4.1.8708.2.4.1.2.9 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V9. | |||||||||||||||||||||
| MlumWdmBasicComplV10 | 1.3.6.1.4.1.8708.2.4.1.2.10 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V10. | |||||||||||||||||||||
| MlumWdmBasicComplV11 | 1.3.6.1.4.1.8708.2.4.1.2.11 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V11. | |||||||||||||||||||||
| MlumWdmBasicComplV12 | 1.3.6.1.4.1.8708.2.4.1.2.12 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V12. | |||||||||||||||||||||
| MlumWdmBasicComplV13 | 1.3.6.1.4.1.8708.2.4.1.2.13 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V13. | |||||||||||||||||||||
| MlumWdmBasicComplV14 | 1.3.6.1.4.1.8708.2.4.1.2.14 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V14. | |||||||||||||||||||||
| MlumWdmBasicComplV15 | 1.3.6.1.4.1.8708.2.4.1.2.15 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V15. | |||||||||||||||||||||
| MlumWdmBasicComplV16 | 1.3.6.1.4.1.8708.2.4.1.2.16 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V16. | |||||||||||||||||||||
| MlumWdmBasicComplV17 | 1.3.6.1.4.1.8708.2.4.1.2.17 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V17. (2.2) | |||||||||||||||||||||
| MlumWdmBasicComplV18 | 1.3.6.1.4.1.8708.2.4.1.2.18 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V18. (3.0) | |||||||||||||||||||||
| MlumWdmBasicComplV19 | 1.3.6.1.4.1.8708.2.4.1.2.19 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V19. (3.1) | |||||||||||||||||||||
| MlumWdmBasicComplV20 | 1.3.6.1.4.1.8708.2.4.1.2.20 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V20. (4.0) | |||||||||||||||||||||
| MlumWdmBasicComplV21 | 1.3.6.1.4.1.8708.2.4.1.2.21 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V21. (4.1) | |||||||||||||||||||||
| MlumWdmBasicComplV22 | 1.3.6.1.4.1.8708.2.4.1.2.22 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V22. (5.0) | |||||||||||||||||||||
| MlumWdmBasicComplV23 | 1.3.6.1.4.1.8708.2.4.1.2.23 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V23. (6.0) | |||||||||||||||||||||
| MlumWdmBasicComplV24 | 1.3.6.1.4.1.8708.2.4.1.2.24 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V24. (8.0) | |||||||||||||||||||||
| MlumWdmBasicComplV25 | 1.3.6.1.4.1.8708.2.4.1.2.25 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V25. (9.0) | |||||||||||||||||||||
| MlumWdmBasicComplV26 | 1.3.6.1.4.1.8708.2.4.1.2.26 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V26. (9.1) | |||||||||||||||||||||
| MlumWdmBasicComplV27 | 1.3.6.1.4.1.8708.2.4.1.2.27 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V27. (10.0) | |||||||||||||||||||||
| MlumWdmBasicComplV28 | 1.3.6.1.4.1.8708.2.4.1.2.28 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V28. (11.0) | |||||||||||||||||||||
| MlumWdmBasicComplV29 | 1.3.6.1.4.1.8708.2.4.1.2.29 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V29. (12.0) | |||||||||||||||||||||
| MlumWdmBasicComplV30 | 1.3.6.1.4.1.8708.2.4.1.2.30 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V30. (13.0) | |||||||||||||||||||||
| MlumWdmBasicComplV31 | 1.3.6.1.4.1.8708.2.4.1.2.31 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V31. (14.0) | |||||||||||||||||||||
| MlumWdmBasicComplV32 | 1.3.6.1.4.1.8708.2.4.1.2.32 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V32. (15.0) | |||||||||||||||||||||
| MlumWdmBasicComplV33 | 1.3.6.1.4.1.8708.2.4.1.2.33 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V33. (16.0) | |||||||||||||||||||||
| MlumWdmBasicComplV34 | 1.3.6.1.4.1.8708.2.4.1.2.34 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V34. (17.0) | |||||||||||||||||||||
| MlumWdmBasicComplV35 | 1.3.6.1.4.1.8708.2.4.1.2.35 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V35. (18.0) | |||||||||||||||||||||
| MlumWdmBasicComplV36 | 1.3.6.1.4.1.8708.2.4.1.2.36 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V36. (19.0) | |||||||||||||||||||||
| MlumWdmBasicComplV37 | 1.3.6.1.4.1.8708.2.4.1.2.37 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V37. (20.0) | |||||||||||||||||||||
| MlumWdmBasicComplV38 | 1.3.6.1.4.1.8708.2.4.1.2.38 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V38. (22.0) | |||||||||||||||||||||
| MlumWdmBasicComplV39 | 1.3.6.1.4.1.8708.2.4.1.2.39 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V38. (22.0) | |||||||||||||||||||||
| MlumWdmBasicComplV40 | 1.3.6.1.4.1.8708.2.4.1.2.40 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V40. (23.1) | |||||||||||||||||||||
| MlumWdmBasicComplV41 | 1.3.6.1.4.1.8708.2.4.1.2.41 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V41. (25.0) | |||||||||||||||||||||
| MlumWdmBasicComplV42 | 1.3.6.1.4.1.8708.2.4.1.2.42 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V42. (27.1)
| |||||||||||||||||||||
| MlumWdmBasicComplV43 | 1.3.6.1.4.1.8708.2.4.1.2.43 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V43. (28.0) | |||||||||||||||||||||
| MlumWdmBasicComplV44 | 1.3.6.1.4.1.8708.2.4.1.2.44 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V44. (29.0) | |||||||||||||||||||||
| MlumWdmBasicComplV45 | 1.3.6.1.4.1.8708.2.4.1.2.45 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V45. (30.0) | |||||||||||||||||||||
| MlumWdmBasicComplV46 | 1.3.6.1.4.1.8708.2.4.1.2.46 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the WDM MIB V46. (30.1) | |||||||||||||||||||||
| MlumWdmBasicComplV47 | 1.3.6.1.4.1.8708.2.4.1.2.47 | ||||||||||||||||||||
compliance · current Basic implementation requirements for the WDM MIB V47. (32.1) | |||||||||||||||||||||
| NlumWdmMinimalGroups | 1.3.6.1.4.1.8708.2.4.1.3 | ||||||||||||||||||||
| GwdmGeneralMinimalGroupV1 | 1.3.6.1.4.1.8708.2.4.1.3.1 | ||||||||||||||||||||
group · current The minimal general wdm objects. | |||||||||||||||||||||
| GwdmIfMinimalGroupV1 | 1.3.6.1.4.1.8708.2.4.1.3.2 | deprecated | |||||||||||||||||||
group · deprecated The wdm trunk interface minimal objects.
| |||||||||||||||||||||
| GwdmPassiveIfMinimalGroupV1 | 1.3.6.1.4.1.8708.2.4.1.3.3 | deprecated | |||||||||||||||||||
group · deprecated The passive i/f group minimal objects.
| |||||||||||||||||||||
| GwdmIfMinimalGroupV2 | 1.3.6.1.4.1.8708.2.4.1.3.4 | ||||||||||||||||||||
group · current The wdm trunk interface minimal objects.
| |||||||||||||||||||||
| GwdmPassiveIfMinimalGroupV2 | 1.3.6.1.4.1.8708.2.4.1.3.5 | ||||||||||||||||||||
group · current The passive i/f group minimal objects.
| |||||||||||||||||||||
| NlumWdmMinimalCompl | 1.3.6.1.4.1.8708.2.4.1.4 | ||||||||||||||||||||
| MlumWdmMinimalComplV1 | 1.3.6.1.4.1.8708.2.4.1.4.1 | deprecated | |||||||||||||||||||
compliance · deprecated Minimal implementation requirements for the wdm MIB v1. | |||||||||||||||||||||
| MlumWdmMinimalComplV2 | 1.3.6.1.4.1.8708.2.4.1.4.2 | deprecated | |||||||||||||||||||
compliance · deprecated Minimal implementation requirements for the wdm MIB v2. | |||||||||||||||||||||
| MlumWdmMinimalComplV3 | 1.3.6.1.4.1.8708.2.4.1.4.3 | deprecated | |||||||||||||||||||
compliance · deprecated Minimal implementation requirements for the wdm MIB v3 (30.1). | |||||||||||||||||||||
| MlumWdmMinimalComplV4 | 1.3.6.1.4.1.8708.2.4.1.4.4 | ||||||||||||||||||||
compliance · current Minimal implementation requirements for the wdm MIB v4 (31.1). | |||||||||||||||||||||
| NlumWdmMIBObjects | 1.3.6.1.4.1.8708.2.4.2 | ||||||||||||||||||||
| NwdmGeneral | 1.3.6.1.4.1.8708.2.4.2.1 | ||||||||||||||||||||
| SwdmGeneralTestAndIncr | 1.3.6.1.4.1.8708.2.4.2.1.1 | TestAndIncr | RW | ||||||||||||||||||
scalar · TestAndIncr · read-write · current Protection against simultaneous access from multiple managers. See SNMPv2-TC. | |||||||||||||||||||||
| SwdmGeneralMibSpecVersion | 1.3.6.1.4.1.8708.2.4.2.1.2 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The MIB specification version. tbd: persistent? | |||||||||||||||||||||
| SwdmGeneralMibImplVersion | 1.3.6.1.4.1.8708.2.4.2.1.3 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The MIB implementation version. tbd: persistent? | |||||||||||||||||||||
| SwdmGeneralLastChangeTime | 1.3.6.1.4.1.8708.2.4.2.1.4 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the MIB was last changed. | |||||||||||||||||||||
| SwdmGeneralStateLastChangeTime | 1.3.6.1.4.1.8708.2.4.2.1.5 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the state of the MIB was last changed. | |||||||||||||||||||||
| SwdmGeneralWdmIfTableSize | 1.3.6.1.4.1.8708.2.4.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmPassiveIfTableSize | 1.3.6.1.4.1.8708.2.4.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmProtTableSize | 1.3.6.1.4.1.8708.2.4.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmVc4TableSize | 1.3.6.1.4.1.8708.2.4.2.1.9 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmRemoteProtTableSize | 1.3.6.1.4.1.8708.2.4.2.1.10 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmCtrlChannelTableSize | 1.3.6.1.4.1.8708.2.4.2.1.11 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmCtrlGroupTableSize | 1.3.6.1.4.1.8708.2.4.2.1.12 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmSubChannelTableSize | 1.3.6.1.4.1.8708.2.4.2.1.13 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmDelayCompPGTableSize | 1.3.6.1.4.1.8708.2.4.2.1.14 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmDelayCompLinkTableSize | 1.3.6.1.4.1.8708.2.4.2.1.15 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmMeanChannelPowerControlTableSize | 1.3.6.1.4.1.8708.2.4.2.1.16 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SwdmGeneralWdmMeanChannelPowerControlGlobalTableSize | 1.3.6.1.4.1.8708.2.4.2.1.17 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| NwdmIfList | 1.3.6.1.4.1.8708.2.4.2.2 | ||||||||||||||||||||
| TwdmIfTable | 1.3.6.1.4.1.8708.2.4.2.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RwdmIfEntry | 1.3.6.1.4.1.8708.2.4.2.2.1.1 | NA | |||||||||||||||||||
| CwdmIfIndex | 1.3.6.1.4.1.8708.2.4.2.2.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each if entry. | |||||||||||||||||||||
| CwdmIfName | 1.3.6.1.4.1.8708.2.4.2.2.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'wdm:1:2:1'. | |||||||||||||||||||||
| CwdmIfDescr | 1.3.6.1.4.1.8708.2.4.2.2.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CwdmIfSubrack | 1.3.6.1.4.1.8708.2.4.2.2.1.1.4 | SubrackNumber | RO | ||||||||||||||||||
column · SubrackNumber · read-only · current The number of the subrack where the interface is located. | |||||||||||||||||||||
| CwdmIfSlot | 1.3.6.1.4.1.8708.2.4.2.2.1.1.5 | SlotNumber | RO | ||||||||||||||||||
column · SlotNumber · read-only · current The number of the slot where the interface is located. | |||||||||||||||||||||
| CwdmIfTxPort | 1.3.6.1.4.1.8708.2.4.2.2.1.1.6 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the port where the interface is located. | |||||||||||||||||||||
| CwdmIfInvPhysIndexOrZero | 1.3.6.1.4.1.8708.2.4.2.2.1.1.7 | Unsigned32 (0..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current The row in the invPhysTable for this interface. Set to 0 if not known. | |||||||||||||||||||||
| CwdmIfTxLambda | 1.3.6.1.4.1.8708.2.4.2.2.1.1.8 | LambdaFrequency | RO | ||||||||||||||||||
column · LambdaFrequency · read-only · current The transmitted frequency given in hundreds of GHz (0.01 GHz). | |||||||||||||||||||||
| CwdmIfHighSpeedMin | 1.3.6.1.4.1.8708.2.4.2.2.1.1.9 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The minimum speed in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. | |||||||||||||||||||||
| CwdmIfHighSpeedMax | 1.3.6.1.4.1.8708.2.4.2.2.1.1.10 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The maximum speed in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. | |||||||||||||||||||||
| CwdmIfPowerLevel | 1.3.6.1.4.1.8708.2.4.2.2.1.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The received power level in units of 0.1 dBm. | |||||||||||||||||||||
| CwdmIfPowerLevelHighThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.12 | Integer32 (-380..-60) | RW | ||||||||||||||||||
column · Integer32 (-380..-60) · read-write · current The upper threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary. | |||||||||||||||||||||
| CwdmIfPowerLevelLowThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.13 | Integer32 (-380..-60) | RW | ||||||||||||||||||
column · Integer32 (-380..-60) · read-write · current The lower threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary. | |||||||||||||||||||||
| CwdmIfLaserTemp | 1.3.6.1.4.1.8708.2.4.2.2.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The pre-set laser temperature in units of 0.1 degrees centigrade. | |||||||||||||||||||||
| CwdmIfLaserTempOffset | 1.3.6.1.4.1.8708.2.4.2.2.1.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current offset from the pre-set temperature in units of 0.1 degrees centigrade. | |||||||||||||||||||||
| CwdmIfLaserTempOffsetThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.16 | Unsigned32 (1..100) | RW | ||||||||||||||||||
column · Unsigned32 (1..100) · read-write · current The absolute value of the offset for the LTL and LTH alarms in units of 0.1 degrees centigrade. | |||||||||||||||||||||
| CwdmIfLaserMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.17 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The administrative state of the TX-side laser. on - The laser is turned on. als - Automatic Laser Shutdown/Turn-Off when lossOfSignal is detected on the RX side of the trunk interface. Note, als is not available for MBA boards.
| |||||||||||||||||||||
| CwdmIfLaserStatus | 1.3.6.1.4.1.8708.2.4.2.2.1.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state of the TX-side laser. off - The laser is turned off. on - The laser is turned on.
| |||||||||||||||||||||
| CwdmIfAdminStatus | 1.3.6.1.4.1.8708.2.4.2.2.1.1.19 | BoardOrInterfaceAdminStatus | RW | ||||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the interface. down - The interface is de-activated. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. Note that there is no difference between 'up' and 'service', if no alarms can be raised from this object. up - The interface will be activated when available. Alarms are not suppressed. This attribute can be written via SNMP. | |||||||||||||||||||||
| CwdmIfOperStatus | 1.3.6.1.4.1.8708.2.4.2.2.1.1.20 | BoardOrInterfaceOperStatus | RO | ||||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing its transition to the 'up' state. up - The interface is active. | |||||||||||||||||||||
| CwdmIfLossOfSignal | 1.3.6.1.4.1.8708.2.4.2.2.1.1.21 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. | |||||||||||||||||||||
| CwdmIfReceivedPowerHigh | 1.3.6.1.4.1.8708.2.4.2.2.1.1.22 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Received power level is too high. Applicable for all signal formats. A: The received power level exceeds the the built-in overload threshold. D: The received power level is 0.5 dB below the overload threshold. | |||||||||||||||||||||
| CwdmIfReceivedPowerLow | 1.3.6.1.4.1.8708.2.4.2.2.1.1.23 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Received power level low threshold exceeded. Applicable for all signal formats. A: The received power level is below the associated threshold. D: The received power level is 0.5 dB above the threshold. | |||||||||||||||||||||
| CwdmIfLaserBiasHigh | 1.3.6.1.4.1.8708.2.4.2.2.1.1.24 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Laser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated threshold. | |||||||||||||||||||||
| CwdmIfErroredSeconds | 1.3.6.1.4.1.8708.2.4.2.2.1.1.25 | FaultStatus | RO | deprecated | |||||||||||||||||
column · FaultStatus · read-only · deprecated Note: This attribute is deprecated! Errored seconds (ES) threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new period. | |||||||||||||||||||||
| CwdmIfSeverelyErroredSeconds | 1.3.6.1.4.1.8708.2.4.2.2.1.1.26 | FaultStatus | RO | deprecated | |||||||||||||||||
column · FaultStatus · read-only · deprecated Note: This attribute is deprecated! Severely errored seconds (SES) threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At the start of a new period. | |||||||||||||||||||||
| CwdmIfBackgroundBlockErrors | 1.3.6.1.4.1.8708.2.4.2.2.1.1.27 | FaultStatus | RO | deprecated | |||||||||||||||||
column · FaultStatus · read-only · deprecated Note: This attribute is deprecated! Background block errors (BBE) threshold exceeded. A: The number of errors during a period exceeds the associated threshold. D: At the start of a new period. | |||||||||||||||||||||
| CwdmIfUnavailableSeconds | 1.3.6.1.4.1.8708.2.4.2.2.1.1.28 | FaultStatus | RO | deprecated | |||||||||||||||||
column · FaultStatus · read-only · deprecated Note: This attribute is deprecated! Unavailable seconds (UAS) threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start of a new period. | |||||||||||||||||||||
| CwdmIfForwardDefectIndication | 1.3.6.1.4.1.8708.2.4.2.2.1.1.29 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Forward defect indication. Applicable for all signal formats; detected at WDM level. This alarm suppresses the corresponding SDH/Sonet alarm. A: Forward defect indication (in wrapper) active. D: Forward defect indication inactive. | |||||||||||||||||||||
| CwdmIfBackwardDefectIndication | 1.3.6.1.4.1.8708.2.4.2.2.1.1.30 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Backward defect indication. Applicable for all signal formats; detected at WDM level. This alarm suppresses the corresponding SDH/Sonet alarm. A: Backward defect indication (in wrapper) active. D: Backward defect indication inactive. | |||||||||||||||||||||
| CwdmIfLossOfFrame | 1.3.6.1.4.1.8708.2.4.2.2.1.1.31 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Loss of frame. Applicable for SDH/Sonet signal formats. A: SDH frame can not be located. D: SDH frame is located. | |||||||||||||||||||||
| CwdmIfAlarmIndicationSignal | 1.3.6.1.4.1.8708.2.4.2.2.1.1.32 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm indication signal. Applicable for SDH/Sonet signal formats. For other proprietary formats, e.g. for the tpDDGbE line signal, a similar functionality is emulated. A: An 'all ones' SDH/Sonet signal is detected. D: SDH/Sonet signal recovered. | |||||||||||||||||||||
| CwdmIfRemoteDefectIndication | 1.3.6.1.4.1.8708.2.4.2.2.1.1.33 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Remote defect indication. Applicable for SDH/Sonet signal formats. A: RDI indication (in SDH/Sonet frame) active. D: RDI indication inactive. | |||||||||||||||||||||
| CwdmIfLossOfSync | 1.3.6.1.4.1.8708.2.4.2.2.1.1.34 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Loss of sync (GbE). Applicable for GbE signal formats. A: GbE 'frame' can not be located. D: GbE 'frame' is located. | |||||||||||||||||||||
| CwdmIfLossOfForwardingErrorCorrection | 1.3.6.1.4.1.8708.2.4.2.2.1.1.35 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Loss of forwarding error correction (FEC). Applicable for all signal formats. A: The interface is unable to perform forwarding error correction. D: The interface is able to perform FEC. | |||||||||||||||||||||
| CwdmIfLaserTempHigh | 1.3.6.1.4.1.8708.2.4.2.2.1.1.36 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Laser temperature high threshold exceeded. A: The temperature exceeds the associated threshold. D: Temperature is 0.5 degrees centigrade below the associated threshold. | |||||||||||||||||||||
| CwdmIfLaserTempLow | 1.3.6.1.4.1.8708.2.4.2.2.1.1.37 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Laser temperatur low threshold exceeded. The temperature exceeds the associated threshold. A: The temperature exceeds the associated threshold. D: Temperature is 0.5 degrees centigrade above the associated threshold. | |||||||||||||||||||||
| CwdmIfRxPort | 1.3.6.1.4.1.8708.2.4.2.2.1.1.38 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the port where the interface is located. | |||||||||||||||||||||
| CwdmIfBitrateMismatch | 1.3.6.1.4.1.8708.2.4.2.2.1.1.39 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Bitrate mismatch (Other). Applicable for other signal formats. A: The interface is unable to lock to the inserted signal. D: The interface is able to lock to the inserted signal. | |||||||||||||||||||||
| CwdmIfLaserBias | 1.3.6.1.4.1.8708.2.4.2.2.1.1.40 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Measures laser bias current value in tenths of mA (0.1 mA). | |||||||||||||||||||||
| CwdmIfLaserBiasThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.41 | Unsigned32 (0..300) | RW | ||||||||||||||||||
column · Unsigned32 (0..300) · read-write · current Sets the threshold for the laser bias alarm. in percentage relative to the value set during production. The preset value is 100%. | |||||||||||||||||||||
| CwdmIfLossOfSignalThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.42 | Integer32 (-380..-220) | RW | ||||||||||||||||||
column · Integer32 (-380..-220) · read-write · current The upper threshold received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary. | |||||||||||||||||||||
| CwdmIfJ0PathTrace | 1.3.6.1.4.1.8708.2.4.2.2.1.1.44 | OCTET STRING (SIZE (1 | 16)) | RO | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (1 | 16)) · read-only · deprecated The received J0 path trace string. Applicable for SDH/Sonet signal formats. | |||||||||||||||||||||
| CwdmIfInbandMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.45 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The administrative state the in-band management channel of the WDM interface. down - The management channel is disabled. up - The management channel is in use.
| |||||||||||||||||||||
| CwdmIfInbandStatus | 1.3.6.1.4.1.8708.2.4.2.2.1.1.46 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The operational state the in-band management channel of the WDM interface. down - The management channel is disabled. up - The management channel is in use.
| |||||||||||||||||||||
| CwdmIfExpectedTxLambda | 1.3.6.1.4.1.8708.2.4.2.2.1.1.47 | LambdaFrequency | RW | ||||||||||||||||||
column · LambdaFrequency · read-write · current The expected frequency or wavelength. ch871 means the frequency 187.1 THz. w1310 means the wavelength 1310 nm. The semantic of this attribute is different depending on the laser frequency type. Fixed frequency: 'Unexpected frequency' is raised if the expected frequency is not equal to actual frequency. Tunable frequency: The attribute is used to tune the laser frequency. 'No frequency set' is raised if no frequency has been selected. This attribute can be written via SNMP. | |||||||||||||||||||||
| CwdmIfForwardingErrorCorrectionMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.48 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The administrative state of the forwarding error
correction function.
disabled - FEC is disabled.
enabled - FEC is activated.
auto - autonegotiation is used to enable or disable
FEC. Note, auto is not available for all
boards.
| |||||||||||||||||||||
| CwdmIfUnexpectedTxLambda | 1.3.6.1.4.1.8708.2.4.2.2.1.1.49 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual frequencies. A: The configured frequency does not match the actual frequency. D: The configured frequency matches the actual frequency. | |||||||||||||||||||||
| CwdmIfTraceIntrusionMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.50 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Indicates whether the trace identifier should be inserted in the transmitted signal. disabled - The trace identifier is taken from the received signal if possible. enabled - The trace identifier set is inserted in the transmitted signal.
| |||||||||||||||||||||
| CwdmIfTraceTransmitted | 1.3.6.1.4.1.8708.2.4.2.2.1.1.51 | DisplayString (SIZE (0..62)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..62)) · read-write · current The trace identifier to be transmitted from this interface. The identifier length is by default 0 to 15. For mxp8iiSonet boards the length is 0 to 62. Set to empty string for default value: <IP address>:<subrack>:<slot>:<port> Note that only the last part of the address is used. | |||||||||||||||||||||
| CwdmIfTraceReceived | 1.3.6.1.4.1.8708.2.4.2.2.1.1.52 | DisplayString (SIZE (0..62)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..62)) · read-only · current The received trace identifier for this interface. | |||||||||||||||||||||
| CwdmIfTraceExpected | 1.3.6.1.4.1.8708.2.4.2.2.1.1.53 | DisplayString (SIZE (0..62)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..62)) · read-write · current Trace identifier used for matching against the received trace identifier. The identifier length is by default 0 to 15. For mxp8iiSonet boards the length is 0 to 62. | |||||||||||||||||||||
| CwdmIfTraceAlarmMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.54 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Controls if the trace identifier mismatch alarm should be raised. disabled - The alarm is disabled. enabled - The alarm is raised if expected trace identifier differs from the received trace identifier.
| |||||||||||||||||||||
| CwdmIfTraceMismatch | 1.3.6.1.4.1.8708.2.4.2.2.1.1.55 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Indicates if the expected trace identifier differs from the received trace identifier. A: The received trace identifier differs from the expected trace identifier. D: The identifiers match. | |||||||||||||||||||||
| CwdmIfLaserStatusLastChangeTime | 1.3.6.1.4.1.8708.2.4.2.2.1.1.56 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The time when the laser status was last changed. | |||||||||||||||||||||
| CwdmIfSuppressRemoteAlarms | 1.3.6.1.4.1.8708.2.4.2.2.1.1.57 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Suppress AIS, FDI and RDI in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms are suppressed.
| |||||||||||||||||||||
| CwdmIfSerialNumberMismatch | 1.3.6.1.4.1.8708.2.4.2.2.1.1.58 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Wrong HW unit installed. The link has not been optimized for this individual, wrong serial number. Action: The installation optimization procedure must be run again. A: The installed board does not match the installation. D: The installed board matches the installation. | |||||||||||||||||||||
| CwdmIfOptimizeDecisionThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.59 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Optimize the threshold for distinguishing between
1s and 0s.
This attribute is of 'action type' - it will always
have the value 'normal'
normal - just a placeholder, is never set by the
user.
run - run the optimization procedure. | |||||||||||||||||||||
| CwdmIfThresholdOptimizationState | 1.3.6.1.4.1.8708.2.4.2.2.1.1.60 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current State of the optimization procedure
normal - no operation has been started
started - the operation is started
searchingFirstLow - Search for the first value of
the lower flank
searchingSecondLow - Search for the second value of
the lower flank
searchingThirdLow - Search for the third value of
the lower flank
searchingFirstHigh - Search for the first value of
the upper flank
searchingSecondHigh - Search for the second value of
the upper flank
searchingThirdHigh - Search for the third value of
the upper flank
finishedOk - the operation has been
successfully finished
finishedFailed - the operation failed
searchingFrameLow - Search for the frame at the
lower end
searchingFrameHigh - Search for the frame at the
upper end
foundFrame - frame has been found
waitOptimize - wait for HW-optimize procedure
| |||||||||||||||||||||
| CwdmIfUseHwDefaultDecisionThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.61 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Use the HW default decision threshold.
This attribute is of 'action type' - it will always
have the value 'normal'
normal - just a placeholder, is never set by the
user.
reset - reset to the default value stored in HW unit.
| |||||||||||||||||||||
| CwdmIfFecCorrectedZeros | 1.3.6.1.4.1.8708.2.4.2.2.1.1.62 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of corrected zeros. | |||||||||||||||||||||
| CwdmIfFecCorrectedOnes | 1.3.6.1.4.1.8708.2.4.2.2.1.1.63 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of corrected ones. | |||||||||||||||||||||
| CwdmIfOptimizedForSerialNumber | 1.3.6.1.4.1.8708.2.4.2.2.1.1.64 | DisplayString (SIZE (0..40)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..40)) · read-create · current This field contains the serial number of the transponder unit, for which the decision threshold is optimized and stored. | |||||||||||||||||||||
| CwdmIfRelativeDecisionThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.65 | Integer32 (-1000000..1000000) | RC | ||||||||||||||||||
column · Integer32 (-1000000..1000000) · read-create · current The 1/0 decision threshold computed at installation. The threshold is automatically optimized if the 'Continous optimization' functionality is enabled. Press the 'Optimize' button to manually trigger the optimization routine once. | |||||||||||||||||||||
| CwdmIfTrxCodeMismatch | 1.3.6.1.4.1.8708.2.4.2.2.1.1.66 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The inserted transceiver does not have a legal manufacturer code. A: A transceiver with illegal code is inserted. D: The transceiver with illegal code is removed. | |||||||||||||||||||||
| CwdmIfTrxBitrateUnavailable | 1.3.6.1.4.1.8708.2.4.2.2.1.1.67 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The inserted transceiver does not support the requested bit rate. A: A transceiver with other supported bit rate than the requested bit rate is inserted. D: The transceiver with the non-requested bit rate is removed, or the object is reconfigured. | |||||||||||||||||||||
| CwdmIfTrxMissing | 1.3.6.1.4.1.8708.2.4.2.2.1.1.68 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current An expected transceiver is missing. A: An expected transceiver is missing. D: The missing transceiver is inserted. | |||||||||||||||||||||
| CwdmIfTrxClass | 1.3.6.1.4.1.8708.2.4.2.2.1.1.69 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current String that describes the transceiver class. | |||||||||||||||||||||
| CwdmIfLaserTempHighRelativeThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.70 | Integer32 (-100..100) | RW | ||||||||||||||||||
column · Integer32 (-100..100) · read-write · current Threshold for the Laser Temp High alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade. | |||||||||||||||||||||
| CwdmIfLaserTempLowRelativeThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.71 | Integer32 (-100..100) | RW | ||||||||||||||||||
column · Integer32 (-100..100) · read-write · current Threshold for the Laser Temp Low alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade. | |||||||||||||||||||||
| CwdmIfTransmitterFailed | 1.3.6.1.4.1.8708.2.4.2.2.1.1.72 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The transceiver HW has detected a failure in the transmitter part. A: The transmitter has failed D: The transmitter is OK again | |||||||||||||||||||||
| CwdmIfReceiverSensitivity | 1.3.6.1.4.1.8708.2.4.2.2.1.1.73 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The lowest power that the receiver is guaranteed to handle, in units of 0.1 dBm. | |||||||||||||||||||||
| CwdmIfPowerLevelLowRelativeThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.74 | Integer32 (-50..100) | RW | ||||||||||||||||||
column · Integer32 (-50..100) · read-write · current The lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity, or loss of signal threshold. - For fixed transceivers it is measured with respect to the loss threshold. - For pluggable transceivers (SFP/XFP) it is measured with respect to the receiver sensitivity. | |||||||||||||||||||||
| CwdmIfIllegalFrequency | 1.3.6.1.4.1.8708.2.4.2.2.1.1.75 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The frequency supported by the transceiver is not recognized by the system. A: Invalid or unknown frequency information is detected in the (pluggable) transceiver or board production data. D: The (pluggable) transceiver or board is replaced. | |||||||||||||||||||||
| CwdmIfLaserForcedOn | 1.3.6.1.4.1.8708.2.4.2.2.1.1.76 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enabled, the laser is on regardless of whether
there is a client signal or not.
disabled - the laser is only on when there is a
client signal.
enabled - the laser is always on. This is intended
to be used at installation to generate
light on the WDM-side for the QMR board
even if there are not client equipment
available.
| |||||||||||||||||||||
| CwdmIfTrafficCombination | 1.3.6.1.4.1.8708.2.4.2.2.1.1.77 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Specifies how different traffic formats can be
combined on different ports on gxp2500, gxp2500Sfp,
fhmxp10g, msMxp10G and msMxp. All combinations
can not be used on all boards.
undefined - no format selected yet
fcGbEx2 - 2 ports can carry either GbE
or Fc, or 1 port can carry 2G
Fc.
dvbEsconx8 - 8 ports can carry either DvB,
Escon, or Escon-LL.
esconx10 - 10 ports can carry Escon.
framedGbEx10 - 10 ports can carry a rate
limited GbE.
esconx6FcGbE - 6 ports can carry Escon,
combined with 1 port carrying
Fc or GbE.
dvbEsconx4FcGbE - 4 ports can carry DvB, Escon,
Escon-LL, combined with 1 port
carrying Fc or GbE.
mixed - All ports can be freely
combined, for experimental
use.
framedGbEx10Vc4 - Like framedGbEx10, but uses
VC4s instead of VC-3
fcx2VcatVc4 - 2 x FC over VCAT VC-4
fc2GVcatVc4 - 2G FC over VCAT VC-4
dvbEsconx8VcatVc4 - Like dvbEsconx8, but uses VCAT
VC-4 instead
mixedVcatVc4 - Like mixed but uses VCAT VC-4
instead
fcGbEx2VcatVc4 - Like fcGbEx2 but uses VCAT
VC-4 instead
gbEx3Stm4Oc12x1Stm1Oc3x3 - 3 ports carry GbE, 1 port can
carry Stm4/Oc12 or Stm1/Oc3, 3 ports
can carry only Stm1/Oc3 (MsMxp)
gbEx1Stm16Oc48x1Stm1Oc3x3 - 1 port carries GbE, 1 port
carries Stm16/Oc48, 3 ports carry
Stm1/Oc3 (MsMxp)
gbESyncEx3Stm4Oc12Stm1Oc3x1 - 3 ports carry synchron GbE, 1
port can carry Stm4/Oc12 or Stm1/Oc3
(MsMxp)
gbEx4Stm16Oc48x2 - 4 ports carry GbE, 2 ports
carry Stm16/Oc48 (MsMxp10GTCEr,
MsMxp10G)
stm16Oc48x4 - 4 ports carry Stm16/Oc48
(MsMxp10GTCEr, MsMxp10G)
gbEx4x2 - 2 x (4 ports carry GbE)
(MsMxpDQgbe)
gbEx2Fcx2x2 - 2 x (2 ports carry GbE, 2
ports carry 1G Fc or 1 port
carries 2G Fc) (MsMxpDQgbe)
gbEStm16Oc48Stm4Oc12Stm1Oc3 - 2 transponders carry GbE or
Stm16/Oc48, 2 transponders carry
Stm4/Oc12 or Stm1/Oc3 (MsMxpQMS2G5)
gbEStm16Oc48 - 4 transponders carry GbE or
Stm16/Oc48 (MsMxpQMS2G5)
syncEx14GLinex2 - 2 ports carry 4G MSMXP Lines
w. Protection, 1 port carry
Synchron GbE (MsMxp10G)
syncEx10 - 10 ports carry synchron GbE
(MsMxp10G)
gbEx3Stm4Oc12x1Stm1Oc3x3Basic - Like gbEx3Stm4Oc12x1Stm1Oc3x3,
with an alternative processing
of the STM client signal (MsMxp)
gbESyncEx3Stm4Oc12Stm1Oc3x1Basic - Like
gbESyncEx3Stm4Oc12Stm1Oc3x1,
with an alternative processing
of STM client signal (MsMxp)
cpri3x3syncEx2 - 3 ports carry cpri3 (2457.6 Mbps),
2 ports carry synchron GbE (fhmxp10g)
syncEx1Cpri4x3 - 3 ports carry cpri4 (3072.0 Mbps),
1 port carries synchron GbE (fhmxp10g)
| |||||||||||||||||||||
| CwdmIfSelectTrafficCombination | 1.3.6.1.4.1.8708.2.4.2.2.1.1.78 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select the traffic combination of the board. | |||||||||||||||||||||
| CwdmIfObjectProperty | 1.3.6.1.4.1.8708.2.4.2.2.1.1.79 | ObjectProperty | RO | ||||||||||||||||||
column · ObjectProperty · read-only · current Property mask. | |||||||||||||||||||||
| CwdmIfTxPowerLevel | 1.3.6.1.4.1.8708.2.4.2.2.1.1.80 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The transmitted power level in units of 0.1 dBm. | |||||||||||||||||||||
| CwdmIfLaserTempActual | 1.3.6.1.4.1.8708.2.4.2.2.1.1.81 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The actual laser temperature in units of 0.1 degrees centigrade. | |||||||||||||||||||||
| CwdmIfTrxFailed | 1.3.6.1.4.1.8708.2.4.2.2.1.1.82 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current A transceiver hardware failure is detected. A: The transceiver fails. D: The transceiver is replaced. | |||||||||||||||||||||
| CwdmIfDisabled | 1.3.6.1.4.1.8708.2.4.2.2.1.1.83 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The interface is disabled. A: Interface disabled. D: Interface enabled. | |||||||||||||||||||||
| CwdmIfLoopback | 1.3.6.1.4.1.8708.2.4.2.2.1.1.84 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The interface is set in loopback mode. A: Loopback enabled. D: Loopback disabled. | |||||||||||||||||||||
| CwdmIfContinousOptimization | 1.3.6.1.4.1.8708.2.4.2.2.1.1.85 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Continuously run the optimization of the decision threshold. enabled - continous optimization enabled. disabled - continous optimization disabled.
| |||||||||||||||||||||
| CwdmIfThresholdOptimizationResultCause | 1.3.6.1.4.1.8708.2.4.2.2.1.1.86 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This text descibes the cause why the latest optimize command failed. The information is only valid if the thresholdOptimizationState is finishedFailed. | |||||||||||||||||||||
| CwdmIfDistributionRole | 1.3.6.1.4.1.8708.2.4.2.2.1.1.87 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Note: This attribute is deprecated! The distribution role of the line function - terminal: normal point-to-point operation - broadcastHub: broadcast on both lines. - broadcastSatellite: drop-and-continue
| |||||||||||||||||||||
| CwdmIfConfigurationCommand | 1.3.6.1.4.1.8708.2.4.2.2.1.1.88 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Note: This attribute is deprecated! Select the operation mode of the line. - terminal: normal point-to-point operation - broadcastHub: broadcast on both lines. - broadcastSatellite: drop-and-continue | |||||||||||||||||||||
| CwdmIfNoFrequencySet | 1.3.6.1.4.1.8708.2.4.2.2.1.1.89 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The tunable laser frequency has not been set. A: Tunable laser frequency is not set. D: Tunable laser frequency is set. | |||||||||||||||||||||
| CwdmIfFormat | 1.3.6.1.4.1.8708.2.4.2.2.1.1.90 | SignalFormat | RC | ||||||||||||||||||
column · SignalFormat · read-create · current The signal format FecLan10GbE1A: iWDM 10G framing format type 1A (TPD10GBE-BU, GBE9/MXP10GFEC) FecLan10GbE1B: iWDM 10G framing format type 1B (TPQ10GFEC, MS-MXP/10G,TPQ10GFECI) Iwdm40Gb: iWDM 40G framing format (MS-TP/40G, MS-MXP/40G) | |||||||||||||||||||||
| CwdmIfConfigurationFormatCommand | 1.3.6.1.4.1.8708.2.4.2.2.1.1.91 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Command to change the signal format. OTU-2 can be selected. | |||||||||||||||||||||
| CwdmIfOHTransparency | 1.3.6.1.4.1.8708.2.4.2.2.1.1.92 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Note: This attribute is deprecated! The 'OH Transparency' setting shall be set to 'off' for standard SDH/SONET mode. Does not work when client wrapper is enabled. When set to 'on', the following tributary OH-bytes are transparently transported: E1, E2, F1, D1-D3, D4-D12, K1, K2, J0 The following are always terminated: B1, B2, M1 and S1.
| |||||||||||||||||||||
| CwdmIfLinkDown | 1.3.6.1.4.1.8708.2.4.2.2.1.1.93 | FaultStatus | RO | deprecated | |||||||||||||||||
column · FaultStatus · read-only · deprecated Note: This attribute is deprecated! A: Failure to negotiate a connection with the other party. D: A connection is negotiated. | |||||||||||||||||||||
| CwdmIfAutoNegotiationMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.94 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Note: This attribute is deprecated! The wanted auto negotiation mode. off - auto negotiation process is disabled on - auto negotiation process is enabled
| |||||||||||||||||||||
| CwdmIfAutoNegotiationStatus | 1.3.6.1.4.1.8708.2.4.2.2.1.1.95 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated Note: This attribute is deprecated! The result of the auto negotiation procedure incomplete - the result is still pending half - half duplex full - full duplex
| |||||||||||||||||||||
| CwdmIfFlowControlMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.96 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Note: This attribute is deprecated! The mode for handling of pause messages between the peers. noPause - PAUSE frame reception and transmission is disabled rxPause - PAUSE frame reception is enabled (asymmetric) txPause - PAUSE frame transmission is enabled (asymetric) bothPause - send and accept pause messages (symmetric).
| |||||||||||||||||||||
| CwdmIfGroupLineMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.97 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the interface is grouped into a ROADM-Line-group. disabled - The interface is not grouped into a ROADM-Line-group. enabled - The interface is grouped into a ROADM-Line-group.
| |||||||||||||||||||||
| CwdmIfFecType | 1.3.6.1.4.1.8708.2.4.2.2.1.1.98 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Set type of FEC.
enhancedFec - 2nd generation Enhanced FEC
(rate compatible with G.709
but > 2 dB additional coding
gain)
g709 - 1st generation FEC according to
ITU-T G.709 (near 6 dB coding gain).
| |||||||||||||||||||||
| CwdmIfFarEndLoopback | 1.3.6.1.4.1.8708.2.4.2.2.1.1.99 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Loop the wdm RX signal back to the wdm TX. This is also called Facility loopback. disabled - the signal is not looped enabled - the signal is looped.
| |||||||||||||||||||||
| CwdmIfFarEndLoopbackTimeout | 1.3.6.1.4.1.8708.2.4.2.2.1.1.100 | Integer32 (0..1200) | RC | ||||||||||||||||||
column · Integer32 (0..1200) · read-create · current Timeout for far end loopback (a.k.a. facility loopback) to make sure connection to node is not lost if ppp link is broken. The unit is hour. 0.1 means 6 minutes. | |||||||||||||||||||||
| CwdmIfFarEndLoopbackEnabled | 1.3.6.1.4.1.8708.2.4.2.2.1.1.101 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Far end loopback (a.k.a. facility loopback) is enabled. | |||||||||||||||||||||
| CwdmIfChangeLoopbackCommand | 1.3.6.1.4.1.8708.2.4.2.2.1.1.102 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Command to change Loopback and loopbacktimeout | |||||||||||||||||||||
| CwdmIfFecFailure | 1.3.6.1.4.1.8708.2.4.2.2.1.1.103 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Too many errors to get valid FEC statistics. It is not possible to run control loops based on FEC statistics. A: Too many errors to get valid FEC statistics. D: The FEC statistics is valid. | |||||||||||||||||||||
| CwdmIfTxSignalStatus | 1.3.6.1.4.1.8708.2.4.2.2.1.1.104 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. up - The signal is OK. notApplicable (2147483647) - Attribute is not used on board.
| |||||||||||||||||||||
| CwdmIfRxSignalStatus | 1.3.6.1.4.1.8708.2.4.2.2.1.1.105 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for incoming (RX) signal of the interface. down - A major fault has occurred degraded - The signal quality is impaired. up - The signal is OK. notApplicable (2147483647) - Attribute is not used on board
| |||||||||||||||||||||
| CwdmIfNearEndLoopback | 1.3.6.1.4.1.8708.2.4.2.2.1.1.106 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Loop the wdm TX signal back to the wdm RX. This is also called Terminal loopback. disabled - the signal is not looped enabled - the signal is looped.
| |||||||||||||||||||||
| CwdmIfNearEndLoopbackTimeout | 1.3.6.1.4.1.8708.2.4.2.2.1.1.107 | Integer32 (0..1200) | RC | ||||||||||||||||||
column · Integer32 (0..1200) · read-create · current Timeout for near end loopback (a.k.a. terminal loopback) to make sure connection to node is not lost if ppp link is broken. The unit is hours. 0.1 means 6 minutes. | |||||||||||||||||||||
| CwdmIfNearEndLoopbackEnabled | 1.3.6.1.4.1.8708.2.4.2.2.1.1.108 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Near end loopback (a.k.a. terminal loopback) is enabled. | |||||||||||||||||||||
| CwdmIfChangeNearEndLoopbackCommand | 1.3.6.1.4.1.8708.2.4.2.2.1.1.109 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Command to change near end loopback (a.k.a. terminal loopback) and loopbacktimeout | |||||||||||||||||||||
| CwdmIfSignalDegraded | 1.3.6.1.4.1.8708.2.4.2.2.1.1.110 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Too many error corrected. If more errors are corrected it might effect the client signal in a negative way. | |||||||||||||||||||||
| CwdmIfHubProtectionMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.111 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Choose if the line should be used in hub protection. (needs to be setup in mba) disabled - Port is not in hub protection (default) enabled - Hub protection is enabled
| |||||||||||||||||||||
| CwdmIfActualFormat | 1.3.6.1.4.1.8708.2.4.2.2.1.1.112 | SignalFormat | RO | ||||||||||||||||||
column · SignalFormat · read-only · current The actual signal format. | |||||||||||||||||||||
| CwdmIfTdcDispersion | 1.3.6.1.4.1.8708.2.4.2.2.1.1.113 | Integer32 (-800..800) | RC | ||||||||||||||||||
column · Integer32 (-800..800) · read-create · current Shows current dispersion value in the unit. | |||||||||||||||||||||
| CwdmIfTdcDispersionCommand | 1.3.6.1.4.1.8708.2.4.2.2.1.1.114 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Sets state and dispersion in the unit. | |||||||||||||||||||||
| CwdmIfTdcDispersionMode | 1.3.6.1.4.1.8708.2.4.2.2.1.1.115 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current States the current mode of the TDC dispersion.
Mode:
auto - The TDC is in auto optimising state.
startValue - Starts with the desired value,
then it goes to auto afterward.
manula - The TDC is in manual/forced mode.
| |||||||||||||||||||||
| CwdmIfLineControlLoopCurrentState | 1.3.6.1.4.1.8708.2.4.2.2.1.1.116 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The current state of the unit. The unit is ready if state=Automatic fine-tuning. The states could be one of the followings: Init DPSK. DPSK Tx Locked. Init EDFA. Coarse-tune DPSK. Coarse-tune TDC, first step. Coarse-tune TDC, second step. Fine-tune TDC. Fine-tune DPSK. TDC in manual/forced mode. Automatic fine-tuning. | |||||||||||||||||||||
| CwdmIfSignalDegradeThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.117 | BerLevel | RW | ||||||||||||||||||
column · BerLevel · read-write · current Threshold for signal degraded alarm, based on BER value. The threshold is settable on the first line port, affecting all line ports. Predefined BER levels rxBerLevel1 = 1E-12 rxBerLevel2 = 1E-13 rxBerLevel3 = 1E-15 | |||||||||||||||||||||
| CwdmIfTrxThresholdOptimizationState | 1.3.6.1.4.1.8708.2.4.2.2.1.1.118 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Threshold Optimization State.
Idle - No regulation done
Searching - Rough threshold regulation
is being performed
Optimizing - Fine threshold regulation
is being performed
Steady State - Regulation at steady state
Failed(trafficLoss) - Failure due to traffic loss
(FEC failure, Loss of sync,
LOF, Bitrate Mismatch)
Failed(LOS) - Failure due to loss of singal
| |||||||||||||||||||||
| CwdmIfTrxDecisionThreshold | 1.3.6.1.4.1.8708.2.4.2.2.1.1.119 | Integer32 (0..100) | RO | ||||||||||||||||||
column · Integer32 (0..100) · read-only · current The threshold is automatically optimized if the 'Continous optimization' functionality is enabled. Press the 'Optimize' button to manually trigger the optimization routine once. | |||||||||||||||||||||
| CwdmIfSwControlledLaserShutdown | 1.3.6.1.4.1.8708.2.4.2.2.1.1.120 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current enabled - the laser is turned off for a specified time, until the timer expires disabled - normal state
| |||||||||||||||||||||
| CwdmIfChangeSwControlledLaserShutdownCommand | 1.3.6.1.4.1.8708.2.4.2.2.1.1.121 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Command to shut the laser down for a user-defined period of time. This setting will over-ride other laser control functions like ALS and protection. The timer can be selected in minutes: [1..30] minutes. When the timer expires, the normal laser control functions will take over the control of the laser. When in the shut-down state, the same command can be issued to cancel the operation prematurely. | |||||||||||||||||||||
| CwdmIfControlledLaserShutdownEnabled | 1.3.6.1.4.1.8708.2.4.2.2.1.1.122 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Software controlled laser shutdown is enabled. Activation - When the command is successfully applied. De-activation - When the timer expires, or the operation is manually cancelled. | |||||||||||||||||||||
| CwdmIfAid | 1.3.6.1.4.1.8708.2.4.2.2.1.1.123 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The access identifier (AID) of the interface. The format is according to GR-833. | |||||||||||||||||||||
| CwdmIfPhysicalLocation | 1.3.6.1.4.1.8708.2.4.2.2.1.1.124 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The physical location of the if. | |||||||||||||||||||||
| CwdmIfTrxTunable | 1.3.6.1.4.1.8708.2.4.2.2.1.1.125 | TruthValueWithNA | RO | ||||||||||||||||||
column · TruthValueWithNA · read-only · current The transceiver is of tunable type. | |||||||||||||||||||||
| NwdmProtList | 1.3.6.1.4.1.8708.2.4.2.3 | ||||||||||||||||||||
| TwdmProtTable | 1.3.6.1.4.1.8708.2.4.2.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The protection group table. | |||||||||||||||||||||
| RwdmProtEntry | 1.3.6.1.4.1.8708.2.4.2.3.1.1 | NA | |||||||||||||||||||
| CwdmProtIndex | 1.3.6.1.4.1.8708.2.4.2.3.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. | |||||||||||||||||||||
| CwdmProtName | 1.3.6.1.4.1.8708.2.4.2.3.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The name of the object, for example 'pg:1:2:1-2:1:3:1-2', where the numbers indicate the subrack, slot and TX-RX port number for the left and right interface of the group. The interface is either a client interface or a line interface. This depends on the protection type, which in turn depends on the type of board that is involved. | |||||||||||||||||||||
| CwdmProtDescr | 1.3.6.1.4.1.8708.2.4.2.3.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CwdmProtRightSubrack | 1.3.6.1.4.1.8708.2.4.2.3.1.1.4 | SubrackNumber | RC | ||||||||||||||||||
column · SubrackNumber · read-create · current The subrack number for this protected interface. | |||||||||||||||||||||
| CwdmProtRightSlot | 1.3.6.1.4.1.8708.2.4.2.3.1.1.5 | SlotNumber | RC | ||||||||||||||||||
column · SlotNumber · read-create · current The slot number for this protected interface. | |||||||||||||||||||||
| CwdmProtRightPort | 1.3.6.1.4.1.8708.2.4.2.3.1.1.6 | PortNumber | RC | ||||||||||||||||||
column · PortNumber · read-create · current The port number for the TX side of this protected interface. Not necessary for boards with only one interface. | |||||||||||||||||||||
| CwdmProtLeftSubrack | 1.3.6.1.4.1.8708.2.4.2.3.1.1.7 | SubrackNumber | RC | ||||||||||||||||||
column · SubrackNumber · read-create · current The subrack number for the other protected interface. | |||||||||||||||||||||
| CwdmProtLeftSlot | 1.3.6.1.4.1.8708.2.4.2.3.1.1.8 | SlotNumber | RC | ||||||||||||||||||
column · SlotNumber · read-create · current The slot number for the other protected interface. | |||||||||||||||||||||
| CwdmProtLeftPort | 1.3.6.1.4.1.8708.2.4.2.3.1.1.9 | PortNumber | RC | ||||||||||||||||||
column · PortNumber · read-create · current The port number for the TX side of the other protected interface. Not necessary for boards with only one interface. | |||||||||||||||||||||
| CwdmProtLastChangeTime | 1.3.6.1.4.1.8708.2.4.2.3.1.1.10 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The time the operational state of the protection group was last changed. | |||||||||||||||||||||
| CwdmProtAdminStatus | 1.3.6.1.4.1.8708.2.4.2.3.1.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The administrative state for the protection group. down - The protection group is inactive. leftForced - The left side is forced active. rightForced - The right side is forced active. auto - The application choses which side should be active. This should be the normal mode of operation. toggle - Switch the active side of the protection group. Only applicable in 'auto' state. After setting adminStatus to 'toggle' it again receives the 'auto' value.
| |||||||||||||||||||||
| CwdmProtOperStatus | 1.3.6.1.4.1.8708.2.4.2.3.1.1.12 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated Note: This object is deprecated. The operational state for the protection group. bothDown - both sides down leftDownRightUp - left side down, right side up leftDownRightStandby - left side down (forced), right side standby leftStandbyRightDown - left side standby, right side down (forced) leftStandbyRightUp - left side standby, right side up leftUpRightDown - left side up, right side down leftUpRightStandby - left side up, right side standby
| |||||||||||||||||||||
| CwdmProtRowStatus | 1.3.6.1.4.1.8708.2.4.2.3.1.1.13 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Manages creation and deletion of conceptual rows. See also SNMPv2-TC. | |||||||||||||||||||||
| CwdmProtServiceDegraded | 1.3.6.1.4.1.8708.2.4.2.3.1.1.14 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Protection service degraded. A: One of the sides of the protection group has signal failure or one side is forced active. D: Both sides of the protection group are available (The signal is recovered or the forced active side is released). | |||||||||||||||||||||
| CwdmProtServiceFailure | 1.3.6.1.4.1.8708.2.4.2.3.1.1.15 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Protection service failure. A: Both sides of the protection group has signal failure or the side that is forced active has signal failure. D: One of the sides of the protection group is available (The signal is recovered or the forced active side is released). | |||||||||||||||||||||
| CwdmProtActiveSide | 1.3.6.1.4.1.8708.2.4.2.3.1.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for the protection group. none - no side is active. left - the left side is active. right - the right side is active.
| |||||||||||||||||||||
| CwdmProtLeftStatus | 1.3.6.1.4.1.8708.2.4.2.3.1.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for the left side of the protection group. down - this side is out of service. up - this side is active.
| |||||||||||||||||||||
| CwdmProtRightStatus | 1.3.6.1.4.1.8708.2.4.2.3.1.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for the right side of the protection group. down - this side is out of service. up - this side is active.
| |||||||||||||||||||||
| CwdmProtProtectionType | 1.3.6.1.4.1.8708.2.4.2.3.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Different types of protection realisation
and modelling. The information is intended
for the TNM.
eqAndFiberProtection - multiple boards,
e.g. two tpMr2500 or tpMr25v2
fiberProtectionI - single board,
e.g. FPU
fiberProtectionII - single board,
e.g. QMR
fiberProtectionIII - single board,
e.g. tpDDGbE
fiberProtectionIIII - single board,
e.g. tpD10GbE
singleEndedBiDirLineProtection - single ended bidirection line protection,
e.g. fhau1
| |||||||||||||||||||||
| CwdmProtObjectProperty | 1.3.6.1.4.1.8708.2.4.2.3.1.1.20 | ObjectProperty | RO | ||||||||||||||||||
column · ObjectProperty · read-only · current Property mask. | |||||||||||||||||||||
| CwdmProtWrapperMode | 1.3.6.1.4.1.8708.2.4.2.3.1.1.21 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Defines how the wrapper will operate in correlation with the traffic switch. followTraffic - use the same interface as the traffic is selected from. fixedToDefaultInterface - wrapper is fixed to the predefined interface. This is the interface over which the PPP-link is defined.
| |||||||||||||||||||||
| CwdmProtWrapperState | 1.3.6.1.4.1.8708.2.4.2.3.1.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Shows which interface that currently is used for wrapper communication.
| |||||||||||||||||||||
| CwdmProtLeftCommSubrack | 1.3.6.1.4.1.8708.2.4.2.3.1.1.23 | SubrackNumber | RC | ||||||||||||||||||
column · SubrackNumber · read-create · current The subrack number of the left communication link for this protection group. | |||||||||||||||||||||
| CwdmProtLeftCommSlot | 1.3.6.1.4.1.8708.2.4.2.3.1.1.24 | SlotNumber | RC | ||||||||||||||||||
column · SlotNumber · read-create · current The slot number of the left communication link for this protection group. | |||||||||||||||||||||
| CwdmProtLeftCommPort | 1.3.6.1.4.1.8708.2.4.2.3.1.1.25 | PortNumber | RC | ||||||||||||||||||
column · PortNumber · read-create · current The port number of the left communication link for this protection group | |||||||||||||||||||||
| CwdmProtRightCommSubrack | 1.3.6.1.4.1.8708.2.4.2.3.1.1.26 | SubrackNumber | RC | ||||||||||||||||||
column · SubrackNumber · read-create · current The subrack number of the right communication link for this protection group. | |||||||||||||||||||||
| CwdmProtRightCommSlot | 1.3.6.1.4.1.8708.2.4.2.3.1.1.27 | SlotNumber | RC | ||||||||||||||||||
column · SlotNumber · read-create · current The slot number of the right communication link for this protection group. | |||||||||||||||||||||
| CwdmProtRightCommPort | 1.3.6.1.4.1.8708.2.4.2.3.1.1.28 | PortNumber | RC | ||||||||||||||||||
column · PortNumber · read-create · current The port number of the right communication link for this protection group | |||||||||||||||||||||
| CwdmProtLeftCommInterface | 1.3.6.1.4.1.8708.2.4.2.3.1.1.29 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The interface used for the left communication link for this protection group. | |||||||||||||||||||||
| CwdmProtRightCommInterface | 1.3.6.1.4.1.8708.2.4.2.3.1.1.30 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The interface used for the right communication link for this protection group. | |||||||||||||||||||||
| CwdmProtCommunicationFailure | 1.3.6.1.4.1.8708.2.4.2.3.1.1.31 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Protection group communication failure A: There are several underlying criterias for this: - Loss of signal on the communication link - Errors on the communication link - Supervision failures - Missing status messages for the protection group D: Status messages are coming in as they should and the link supervision works. | |||||||||||||||||||||
| CwdmProtHubTrafficConfigMismatch | 1.3.6.1.4.1.8708.2.4.2.3.1.1.32 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Traffic configuration received over the two lines differ. A: The traffic configuration received over the two lines do not match. D: Both lines have the same traffic configuration | |||||||||||||||||||||
| CwdmProtSignalDegradeProtection | 1.3.6.1.4.1.8708.2.4.2.3.1.1.33 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Include signal degraded alarm as a protection switch criteria.
| |||||||||||||||||||||
| CwdmProtRevertiveSwitchWtrTimer | 1.3.6.1.4.1.8708.2.4.2.3.1.1.34 | Unsigned32 (1..1440) | RW | ||||||||||||||||||
column · Unsigned32 (1..1440) · read-write · current When revertive mode is enabled and traffic is running on secondary path, this timer decides when to switch back to primary path (when the primary path is up and working again). Please note! To make sure that the desired timer value is used, always change this separatly from other settings. | |||||||||||||||||||||
| CwdmProtRevertiveSwitch | 1.3.6.1.4.1.8708.2.4.2.3.1.1.35 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If revertive protection switch is enabled, the primary path will automaticly be chosen as working path if it is operational. A switch back to the primary path will however be delayed with the period of time given by the user.
| |||||||||||||||||||||
| CwdmProtRevertiveSwitchPrimaryPath | 1.3.6.1.4.1.8708.2.4.2.3.1.1.36 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The interface in the protection group that should be used as prefered working path.
| |||||||||||||||||||||
| CwdmProtRevertiveSwitchSecondaryPath | 1.3.6.1.4.1.8708.2.4.2.3.1.1.37 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The interface in the protection group that is used as prefered protection path. This is set automatically when choosing the primary working path.
| |||||||||||||||||||||
| CwdmProtSecondaryPathUsed | 1.3.6.1.4.1.8708.2.4.2.3.1.1.38 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm indicating that the alternative secondary path is currently used, when revertive switching is enabled. A: Secondary path is used as working path. D: Primary path is used as working path. | |||||||||||||||||||||
| NlumentisWdmNotifications | 1.3.6.1.4.1.8708.2.4.2.4 | ||||||||||||||||||||
| NwdmNotifyPrefix | 1.3.6.1.4.1.8708.2.4.2.4.0 | ||||||||||||||||||||
| !wdmProtOperStatusBothDown | 1.3.6.1.4.1.8708.2.4.2.4.0.1 | deprecated | |||||||||||||||||||
notification · deprecated Sent when the protection group changes operational status.
| |||||||||||||||||||||
| !wdmProtOperStatusLeftDownRightUp | 1.3.6.1.4.1.8708.2.4.2.4.0.2 | deprecated | |||||||||||||||||||
notification · deprecated Sent when the protection group changes operational status.
| |||||||||||||||||||||
| !wdmProtOperStatusLeftDownRightStandby | 1.3.6.1.4.1.8708.2.4.2.4.0.3 | deprecated | |||||||||||||||||||
notification · deprecated Sent when the protection group changes operational status.
| |||||||||||||||||||||
| !wdmProtOperStatusLeftStandbyRightDown | 1.3.6.1.4.1.8708.2.4.2.4.0.4 | deprecated | |||||||||||||||||||
notification · deprecated Sent when the protection group changes operational status.
| |||||||||||||||||||||
| !wdmProtOperStatusLeftStandbyRightUp | 1.3.6.1.4.1.8708.2.4.2.4.0.5 | deprecated | |||||||||||||||||||
notification · deprecated Sent when the protection group changes operational status.
| |||||||||||||||||||||
| !wdmProtOperStatusLeftUpRightDown | 1.3.6.1.4.1.8708.2.4.2.4.0.6 | deprecated | |||||||||||||||||||
notification · deprecated Sent when the protection group changes operational status.
| |||||||||||||||||||||
| !wdmProtOperStatusLeftUpRightStandby | 1.3.6.1.4.1.8708.2.4.2.4.0.7 | deprecated | |||||||||||||||||||
notification · deprecated Sent when the protection group changes operational status.
| |||||||||||||||||||||
| !wdmIfLaserStatusOn | 1.3.6.1.4.1.8708.2.4.2.4.0.8 | ||||||||||||||||||||
notification · current Sent when the laser of the interface is turned on. | |||||||||||||||||||||
| !wdmIfLaserStatusOff | 1.3.6.1.4.1.8708.2.4.2.4.0.9 | ||||||||||||||||||||
notification · current Sent when the laser of the interface is turned off. | |||||||||||||||||||||
| !wdmProtStatusChanged | 1.3.6.1.4.1.8708.2.4.2.4.0.10 | ||||||||||||||||||||
notification · current Sent when the protection group changes operational status. | |||||||||||||||||||||
| NwdmPassiveIfList | 1.3.6.1.4.1.8708.2.4.2.5 | ||||||||||||||||||||
| TwdmPassiveIfTable | 1.3.6.1.4.1.8708.2.4.2.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RwdmPassiveIfEntry | 1.3.6.1.4.1.8708.2.4.2.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the interface list. Each interface consists of a uni- or bi-directional port.
| |||||||||||||||||||||
| CwdmPassiveIfIndex | 1.3.6.1.4.1.8708.2.4.2.5.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. | |||||||||||||||||||||
| CwdmPassiveIfName | 1.3.6.1.4.1.8708.2.4.2.5.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'wdmi:1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port number. | |||||||||||||||||||||
| CwdmPassiveIfDescr | 1.3.6.1.4.1.8708.2.4.2.5.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CwdmPassiveIfSubrack | 1.3.6.1.4.1.8708.2.4.2.5.1.1.5 | SubrackNumber | RO | ||||||||||||||||||
column · SubrackNumber · read-only · current The number of the subrack where the interface is located. | |||||||||||||||||||||
| CwdmPassiveIfSlot | 1.3.6.1.4.1.8708.2.4.2.5.1.1.6 | SlotNumber | RO | ||||||||||||||||||
column · SlotNumber · read-only · current The number of the slot where the interface is located. | |||||||||||||||||||||
| CwdmPassiveIfPort | 1.3.6.1.4.1.8708.2.4.2.5.1.1.7 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the port where the interface is located. | |||||||||||||||||||||
| CwdmPassiveIfInvPhysIndexOrZero | 1.3.6.1.4.1.8708.2.4.2.5.1.1.8 | Unsigned32 (0..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current The row in the invPhysTable for this interface. Set to 0 if not known. | |||||||||||||||||||||
| CwdmPassiveIfDirection | 1.3.6.1.4.1.8708.2.4.2.5.1.1.9 | PortType | RO | ||||||||||||||||||
column · PortType · read-only · current The type of signal the interface expects. rx - Only ingoing signal. LambdaType, LambdaMin and LambdaMax indicates the frequency properties for the ingoing signal. tx - Only outgoing signal. LambdaType, LambdaMin and LambdaMax indicates the frequency properties for the outgoing signal. biDi - Ingoing and outgoing signal on the same port. LambdaType, LambdaMin and LambdaMax indicates the frequency properties for the bi-directional signal. | |||||||||||||||||||||
| CwdmPassiveIfLambdaType | 1.3.6.1.4.1.8708.2.4.2.5.1.1.10 | LambdaType | RO | ||||||||||||||||||
column · LambdaType · read-only · current The type of wavelengths the port of the interface can accomodate. fixed - The port received or transmits a fixed frequency. range - The port can handle a range of frequencies. Not used. transparent - There are no frequency properties associated with the port. | |||||||||||||||||||||
| CwdmPassiveIfLambda | 1.3.6.1.4.1.8708.2.4.2.5.1.1.11 | LambdaFrequency | RO | ||||||||||||||||||
column · LambdaFrequency · read-only · current The frequency given in hundreds of GHz (0.01 GHz). Set to 0 for transparent ports. | |||||||||||||||||||||
| CwdmPassiveIfLambdaMax | 1.3.6.1.4.1.8708.2.4.2.5.1.1.12 | LambdaFrequency | RO | ||||||||||||||||||
column · LambdaFrequency · read-only · current The maximum frequency (for the 'wavelength') in GHz. | |||||||||||||||||||||
| CwdmPassiveIfLastChangeTime | 1.3.6.1.4.1.8708.2.4.2.5.1.1.13 | DateAndTime | RO | deprecated | |||||||||||||||||
column · DateAndTime · read-only · deprecated The time when the state of the interface entry was last changed. | |||||||||||||||||||||
| CwdmPassiveIfExpectedLambda | 1.3.6.1.4.1.8708.2.4.2.5.1.1.14 | LambdaFrequency | RW | ||||||||||||||||||
column · LambdaFrequency · read-write · current The frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz). This attribute can be written via SNMP. | |||||||||||||||||||||
| CwdmPassiveIfUnexpectedLambda | 1.3.6.1.4.1.8708.2.4.2.5.1.1.15 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The actual frequency does not match the hundreds of GHz (0.01 GHz). The actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual frequencies. A: The configured frequency does not match the actual frequency. D: The configured frequency matches the actual frequency. | |||||||||||||||||||||
| CwdmPassiveIfAdminStatus | 1.3.6.1.4.1.8708.2.4.2.5.1.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The administrative state for the port. down - The alarm are inhibited up - Alarms are reported
| |||||||||||||||||||||
| CwdmPassiveIfOperStatus | 1.3.6.1.4.1.8708.2.4.2.5.1.1.17 | BoardOrInterfaceOperStatus | RO | ||||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the port. notPresent - The board is missing down - Admin down up - The board is present and admin up | |||||||||||||||||||||
| CwdmPassiveIfObjectProperty | 1.3.6.1.4.1.8708.2.4.2.5.1.1.18 | ObjectProperty | RO | ||||||||||||||||||
column · ObjectProperty · read-only · current Property mask. | |||||||||||||||||||||
| CwdmPassiveIfExpectedLambdaMax | 1.3.6.1.4.1.8708.2.4.2.5.1.1.19 | LambdaFrequency | RW | ||||||||||||||||||
column · LambdaFrequency · read-write · current The Max frequency of the 'wavelength' range given in hundreds of GHz (0.01 GHz). This attribute can be written via SNMP. | |||||||||||||||||||||
| CwdmPassiveIfAid | 1.3.6.1.4.1.8708.2.4.2.5.1.1.20 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The access identifier (AID) of the interface. The format is according to GR-833. | |||||||||||||||||||||
| CwdmPassiveIfPhysicalLocation | 1.3.6.1.4.1.8708.2.4.2.5.1.1.21 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The physical location of the if. The format is according to GR-833. | |||||||||||||||||||||
| CwdmPassiveIfIfNo | 1.3.6.1.4.1.8708.2.4.2.5.1.1.22 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the port where the interface is located. | |||||||||||||||||||||
| NwdmVc4List | 1.3.6.1.4.1.8708.2.4.2.6 | ||||||||||||||||||||
| TwdmVc4Table | 1.3.6.1.4.1.8708.2.4.2.6.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RwdmVc4Entry | 1.3.6.1.4.1.8708.2.4.2.6.1.1 | NA | |||||||||||||||||||
| CwdmVc4Index | 1.3.6.1.4.1.8708.2.4.2.6.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each if entry. | |||||||||||||||||||||
| CwdmVc4Name | 1.3.6.1.4.1.8708.2.4.2.6.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the vc4/vc3/STS-1, e.g. vc4:1:2:1-2:8 where the first number indicates sub-rack, the second slot number and the third/forth are the port numbers. The last number is the vc4/vc3/STS-1 id within the STM16/STS-48 frame. | |||||||||||||||||||||
| CwdmVc4Descr | 1.3.6.1.4.1.8708.2.4.2.6.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CwdmVc4Subrack | 1.3.6.1.4.1.8708.2.4.2.6.1.1.4 | SubrackNumber | RO | ||||||||||||||||||
column · SubrackNumber · read-only · current The number of the subrack where the vc4/vc3/STS-1 is located. | |||||||||||||||||||||
| CwdmVc4Slot | 1.3.6.1.4.1.8708.2.4.2.6.1.1.5 | SlotNumber | RO | ||||||||||||||||||
column · SlotNumber · read-only · current The number of the slot where the vc4/vc3/STS-1 is located. | |||||||||||||||||||||
| CwdmVc4TxPort | 1.3.6.1.4.1.8708.2.4.2.6.1.1.6 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the port where the TX-side of the vc4/vc3/STS-1 is located. | |||||||||||||||||||||
| CwdmVc4RxPort | 1.3.6.1.4.1.8708.2.4.2.6.1.1.7 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the port where the RX-side of the vc4/vc3/STS-1 is located. | |||||||||||||||||||||
| CwdmVc4Vc4 | 1.3.6.1.4.1.8708.2.4.2.6.1.1.8 | Unsigned32 (1..64) | RO | ||||||||||||||||||
column · Unsigned32 (1..64) · read-only · current The id of the vc4 within the STM64/STM16 frame. When Sonet, the id of the STS3 within the OC192/OC48 frame. | |||||||||||||||||||||
| CwdmVc4ObjectProperty | 1.3.6.1.4.1.8708.2.4.2.6.1.1.9 | ObjectProperty | RO | ||||||||||||||||||
column · ObjectProperty · read-only · current Property mask. | |||||||||||||||||||||
| CwdmVc4AuAlarmIndicationSignal | 1.3.6.1.4.1.8708.2.4.2.6.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Alarm indication signal (AIS). Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH/Sonet signal is detected. D: SDH/Sonet signal recovered.
| |||||||||||||||||||||
| CwdmVc4AuLossOfPointer | 1.3.6.1.4.1.8708.2.4.2.6.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Loss of pointer detected. Applicable for SDH/Sonet signal formats. A: A loss of pointer is detected. D: SDH/Sonet signal recovered.
| |||||||||||||||||||||
| CwdmVc4RxSignalStatus | 1.3.6.1.4.1.8708.2.4.2.6.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for incoming (RX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. up - The signal is OK.
| |||||||||||||||||||||
| CwdmVc4ConcatenationStatus | 1.3.6.1.4.1.8708.2.4.2.6.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Describes if and how the VC4s are concatenated. In case of sonet how the STS3s are concatenated. on - Concatenation is used. off - No concatenation is used. can be vc3 (STS-1), vc4 (STS-3, STM1/OC3), vc4x4c (STM4/OC12), vc4x16c (STS-48, STM16/OC48), vc4x64c (STS-128, STM64/OC192), sts1 (STS-1), sts3c (STS-3 concatenated), sts12c (STS-12 concatenated).
| |||||||||||||||||||||
| CwdmVc4PayloadStatus | 1.3.6.1.4.1.8708.2.4.2.6.1.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Describes if the VC4/STS3 contains payload. equipped - VC4/STS3 contains payload. unequipped - No payload in VC4/STS3.
| |||||||||||||||||||||
| CwdmVc4ConnectionStatus | 1.3.6.1.4.1.8708.2.4.2.6.1.1.15 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Shows the name of the client port and possible subchannel/vc4 that it is connected to or Unconnected if not connected. | |||||||||||||||||||||
| CwdmVc4ConnectedForeignIndex | 1.3.6.1.4.1.8708.2.4.2.6.1.1.16 | Unsigned32 (0..2147483647) | RW | ||||||||||||||||||
column · Unsigned32 (0..2147483647) · read-write · current Shows the index of the connected interface. Or 0 if unconnected. | |||||||||||||||||||||
| CwdmVc4AdminStatus | 1.3.6.1.4.1.8708.2.4.2.6.1.1.17 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The administrative state for the vc4/vc3/STS-1. down - The vc3/vc4/STS-1 should not be used. This vc4/vc3 will not affect rxSignalStatus. up - The vc4/vc3/STS-1 should be used. This vc4/vc3/STS-1 will affect rxSignalStatus.
| |||||||||||||||||||||
| NwdmRemoteProtList | 1.3.6.1.4.1.8708.2.4.2.7 | ||||||||||||||||||||
| TwdmRemoteProtTable | 1.3.6.1.4.1.8708.2.4.2.7.1 | NA | |||||||||||||||||||
table · not-accessible · current The protection group table. | |||||||||||||||||||||
| RwdmRemoteProtEntry | 1.3.6.1.4.1.8708.2.4.2.7.1.1 | NA | |||||||||||||||||||
| CwdmRemoteProtIndex | 1.3.6.1.4.1.8708.2.4.2.7.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. | |||||||||||||||||||||
| CwdmRemoteProtName | 1.3.6.1.4.1.8708.2.4.2.7.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The name of the object, for example 'rpg:1:2:1', where the numbers indicate the subrack, slot and TX port number for the local interface of the group. The interface is either a client interface or a line interface. This depends on the protection type, which in turn depends on the type of board that is involved. | |||||||||||||||||||||
| CwdmRemoteProtDescr | 1.3.6.1.4.1.8708.2.4.2.7.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CwdmRemoteProtLocalSubrack | 1.3.6.1.4.1.8708.2.4.2.7.1.1.4 | SubrackNumber | RC | ||||||||||||||||||
column · SubrackNumber · read-create · current The subrack number for this protected interface. | |||||||||||||||||||||
| CwdmRemoteProtLocalSlot | 1.3.6.1.4.1.8708.2.4.2.7.1.1.5 | SlotNumber | RC | ||||||||||||||||||
column · SlotNumber · read-create · current The slot number for this protected interface. | |||||||||||||||||||||
| CwdmRemoteProtLocalPort | 1.3.6.1.4.1.8708.2.4.2.7.1.1.6 | PortNumber | RC | ||||||||||||||||||
column · PortNumber · read-create · current The port number for the TX side of this protected interface. | |||||||||||||||||||||
| CwdmRemoteProtCommSubrack | 1.3.6.1.4.1.8708.2.4.2.7.1.1.7 | SubrackNumber | RC | ||||||||||||||||||
column · SubrackNumber · read-create · current The subrack number of the communication link for this protection group. | |||||||||||||||||||||
| CwdmRemoteProtCommSlot | 1.3.6.1.4.1.8708.2.4.2.7.1.1.8 | SlotNumber | RC | ||||||||||||||||||
column · SlotNumber · read-create · current The slot number of the communication link for this protection group. | |||||||||||||||||||||
| CwdmRemoteProtCommPort | 1.3.6.1.4.1.8708.2.4.2.7.1.1.9 | PortNumber | RC | ||||||||||||||||||
column · PortNumber · read-create · current The port number of the communication link for this protection group | |||||||||||||||||||||
| CwdmRemoteProtCommInterface | 1.3.6.1.4.1.8708.2.4.2.7.1.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The port number of the communication link for this protection group | |||||||||||||||||||||
| CwdmRemoteProtLastChangeTime | 1.3.6.1.4.1.8708.2.4.2.7.1.1.11 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The time the operational state of the protection group was last changed. | |||||||||||||||||||||
| CwdmRemoteProtIpAddress | 1.3.6.1.4.1.8708.2.4.2.7.1.1.12 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current The IP-address of the remote node. | |||||||||||||||||||||
| CwdmRemoteProtIdentifier | 1.3.6.1.4.1.8708.2.4.2.7.1.1.13 | DisplayString | RC | ||||||||||||||||||
column · DisplayString · read-create · current The identifier (name) of the protection group that is understod by both the local and the remote node. | |||||||||||||||||||||
| CwdmRemoteProtRole | 1.3.6.1.4.1.8708.2.4.2.7.1.1.14 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The role of the node in this protection group. master - the manager should read info from this node. slave - the manager should read from the other node
| |||||||||||||||||||||
| CwdmRemoteProtAdminStatus | 1.3.6.1.4.1.8708.2.4.2.7.1.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The administrative state for the protection group. down - The protection group is inactive. localForced - The local side is forced active. remoteForced - The remote side is forced active. auto - The application choses which side should be active. This should be the normal mode of operation. toggle - Switch the active side of the protection group. Only applicable in 'auto' state. After setting adminStatus to 'toggle' it again receives the 'auto' value.
| |||||||||||||||||||||
| CwdmRemoteProtRowStatus | 1.3.6.1.4.1.8708.2.4.2.7.1.1.16 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Manages creation and deletion of conceptual rows. See also SNMPv2-TC. | |||||||||||||||||||||
| CwdmRemoteProtActiveSide | 1.3.6.1.4.1.8708.2.4.2.7.1.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for the protection group. none - no side is active. local - the local side is active. remote - the remote side is active.
| |||||||||||||||||||||
| CwdmRemoteProtLocalStatus | 1.3.6.1.4.1.8708.2.4.2.7.1.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for the local side of the protection group. down - this side is out of service. up - this side is working.
| |||||||||||||||||||||
| CwdmRemoteProtRemoteStatus | 1.3.6.1.4.1.8708.2.4.2.7.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state for the remote side of the protection group. down - this side is out of service. up - this side is working.
| |||||||||||||||||||||
| CwdmRemoteProtObjectProperty | 1.3.6.1.4.1.8708.2.4.2.7.1.1.20 | ObjectProperty | RO | ||||||||||||||||||
column · ObjectProperty · read-only · current Property mask. | |||||||||||||||||||||
| CwdmRemoteProtServiceDegraded | 1.3.6.1.4.1.8708.2.4.2.7.1.1.21 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Protection service degraded. A: One of the sides of the protection group has signal failure or one side is forced active. D: Both sides of the protection group are available (The signal is recovered or the forced active side is released). | |||||||||||||||||||||
| CwdmRemoteProtServiceFailure | 1.3.6.1.4.1.8708.2.4.2.7.1.1.22 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Protection service failure. A: Both sides of the protection group has signal failure or the side that is forced active has signal failure. D: One of the sides of the protection group is available (The signal is recovered or the forced active side is released). | |||||||||||||||||||||
| CwdmRemoteProtSetup | 1.3.6.1.4.1.8708.2.4.2.7.1.1.23 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Procedure to setup the protection group. - Communication Interface Select from a list of available interfaces - Remote IP-address Select from a list of discovered addresses or enter a value - Identifier Select from a list of identifiers that have been published by the node with the IP-address selected above, or enter a unique value. The identifier must be unique both in the local node and in the remote node. - Role Select whether the local end of the protection group shall be master or slave. | |||||||||||||||||||||
| CwdmRemoteProtSetupFailure | 1.3.6.1.4.1.8708.2.4.2.7.1.1.24 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Protection group setup failure. A: The defined remote IP-address and/or protection group identifier can not be resolved with the peer node. D: The protection group can be resolved | |||||||||||||||||||||
| CwdmRemoteProtRoleConflict | 1.3.6.1.4.1.8708.2.4.2.7.1.1.25 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Protection group master/slave conflict. A: The protection group is resolved, but the two peers have the same role defined - both master, or both slave D: Their respective roles differ | |||||||||||||||||||||
| CwdmRemoteProtCommunicationFailure | 1.3.6.1.4.1.8708.2.4.2.7.1.1.26 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Protection group communication failure A: There are several underlying criterias for this: - Loss of signal on the communication link - Errors on the communication link - Supervision failures - Missing status messages for the protection group D: Status messages are coming in as they should and the link supervision works. | |||||||||||||||||||||
| NwdmCtrlChannelList | 1.3.6.1.4.1.8708.2.4.2.8 | ||||||||||||||||||||
| TwdmCtrlChannelTable | 1.3.6.1.4.1.8708.2.4.2.8.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RwdmCtrlChannelEntry | 1.3.6.1.4.1.8708.2.4.2.8.1.1 | NA | |||||||||||||||||||
| CwdmCtrlChannelIndex | 1.3.6.1.4.1.8708.2.4.2.8.1.1.1 | Unsigned32 (1..2147483647) | RO | 34817 | |||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelName | 1.3.6.1.4.1.8708.2.4.2.8.1.1.2 | MgmtNameString | RO | ch:1:8:1:919 | |||||||||||||||||
column · MgmtNameString · read-only · current The management name of the channel, for example 'ch:1:2:1:959' (ch:[subrack]:[slot]:[port]:[channel]). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelSubrack | 1.3.6.1.4.1.8708.2.4.2.8.1.1.3 | SubrackNumber | RC | 1 | |||||||||||||||||
column · SubrackNumber · read-create · current The subrack number of the unit where the controlled channel is attenuated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelSlot | 1.3.6.1.4.1.8708.2.4.2.8.1.1.4 | SlotNumber | RC | 8 | |||||||||||||||||
column · SlotNumber · read-create · current The slot number of the unit where the controlled channel is attenuated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelTxPort | 1.3.6.1.4.1.8708.2.4.2.8.1.1.5 | PortNumber | RO | 1 | |||||||||||||||||
column · PortNumber · read-only · current The port number of the controlled channel in the unit where the channel is attenuated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelChannel | 1.3.6.1.4.1.8708.2.4.2.8.1.1.6 | LambdaFrequency | RC | 19190 | |||||||||||||||||
column · LambdaFrequency · read-create · current The frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelGroupNumber | 1.3.6.1.4.1.8708.2.4.2.8.1.1.7 | Unsigned32 (1..64) | RC | 2 | |||||||||||||||||
column · Unsigned32 (1..64) · read-create · current The number of the group to which the controlled channel belongs. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelAdminStatus | 1.3.6.1.4.1.8708.2.4.2.8.1.1.8 | BoardOrInterfaceAdminStatus | RW | 1 | |||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the channel control. down - The channel control is inactive. Channel attenuation is set to its maximum value. service - The channel control is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The channel control is active. Alarms are not suppressed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelWantedOutputPower | 1.3.6.1.4.1.8708.2.4.2.8.1.1.9 | Integer32 (-260..120) | RW | -130 | |||||||||||||||||
column · Integer32 (-260..120) · read-write · current The wanted output power. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelCurrentOutputPower | 1.3.6.1.4.1.8708.2.4.2.8.1.1.10 | Integer32 | RO | -2147483648 | |||||||||||||||||
column · Integer32 · read-only · current The actual output power. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelCurrentAttenuation | 1.3.6.1.4.1.8708.2.4.2.8.1.1.11 | Unsigned32 | RO | 200 | |||||||||||||||||
column · Unsigned32 · read-only · current The current attenuation. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelForceRegulationCommand | 1.3.6.1.4.1.8708.2.4.2.8.1.1.12 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Starts a regulation manually | |||||||||||||||||||||
| CwdmCtrlChannelOuputPowerControlFailure | 1.3.6.1.4.1.8708.2.4.2.8.1.1.13 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the wanted output power can not be obtained. That is a) The wanted power has not been obtained after the maximum number of consequent control cycles. b) Failure to read the current output power. c) Failure to set attenuation when regulating channel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelCurrentPowerOutOfRange | 1.3.6.1.4.1.8708.2.4.2.8.1.1.14 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the current output power is outside the 'regulation range' for the group. At this point, no regulation will be performed on the channel. The operator must change the wantedOutputPower or the regulationRange. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelAttenuationOutOfRange | 1.3.6.1.4.1.8708.2.4.2.8.1.1.15 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the attenuation is at the maximum or minimum values for the controlled device and the wantedOutputPower cannot be obtained. At this point, no regulation will be performed on the channel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelStatus | 1.3.6.1.4.1.8708.2.4.2.8.1.1.16 | INTEGER | RO | initial(1) | |||||||||||||||||
column · INTEGER · read-only · current The regulation status of the channel.
initial - No regulation has been performed yet.
searching - The system is trying to detect the channel.
regulating - The system is regulating the output
power of the channel to the wanted
level.
ok - The output power of the channel is at the
wanted level.
notFound - Channel could not be detected in monitor.
error - Regulation of channel output power failed.
waiting - Channel is in queue for regulation startup
and will be started when ongoing
regulations and prior elements in the
startup queue have been processed.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelStartupChannel | 1.3.6.1.4.1.8708.2.4.2.8.1.1.17 | INTEGER | RW | normal(1) | |||||||||||||||||
column · INTEGER · read-write · current Initiates a safe startup procedure for the channel when set to 'start'. If the administrative status of the channel is 'down' or the channel is not detected by the monitor unit, the system attempts to detect the channel as follows: 1) The attenuation is set to its maximum value. 2) The attenuation is decreased until the channel is detected by the monitor. When the channel is detected, regulation of the channel is started, ignoring the regulation range. If the channel cannot be detected, channelStatus is set to notFound. If regulation in fails, channelStatus is set to error and an alarm is raised. When the startup sequence is finished, the administrative status of the channel is set to 'up'. If a regulation is ongoing when the startup procedure is initiated, the channel is put on a waiting queue until the ongoing regulation is finished. The startup queue has a limited length. If the queue is filled up with waiting channels, further startup commands will be blocked until all the queued channels have been started. At times when it is not allowed to start the channel, e.g. in commissioning mode or when the queue is full, this attribute is set to 'blocked' and cannot be set to start. NOTE: The 'blocked' state is handled entirely by the system and cannot be set or reset by the user. The state of this attribute immediately returns to 'normal' when the startup procedure has been initiated or the channel is put on the startup queue.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelMonitorIndex | 1.3.6.1.4.1.8708.2.4.2.8.1.1.18 | Unsigned32 (0..2147483647) | RO | 1026 | |||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current Shows the index of the connected monitor interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelStartupCommand | 1.3.6.1.4.1.8708.2.4.2.8.1.1.19 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Initiates a safe startup sequence for the channel. If the administrative status of the channel is 'down' or the channel is not detected by the monitor unit, the system attempts to detect the channel as follows: 1) The attenuation is set to its maximum value. 2) The attenuation is decreased until the channel is detected by the monitor. When the channel is detected, regulation of the channel is started, ignoring the regulation range. If the channel cannot be detected, channelStatus is set to notFound. If regulation fails, channelStatus is set to 'error' and an alarm is raised. When the startup sequence is finished, the administrative status of the channel is set to 'up'. If a regulation is ongoing when the startup procedure is initiated, the channel is put on a waiting queue until the ongoing regulation is finished. The startup queue has a limited length. If the queue is filled up with waiting channels, further startup commands will be blocked until all the queued channels have been started. | |||||||||||||||||||||
| CwdmCtrlChannelSfpMissing | 1.3.6.1.4.1.8708.2.4.2.8.1.1.20 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current An expected SFP is missing. A(ctivation): An expected SFP is missing. D(e-activation): The missing SFP is inserted. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelSfpMediaMismatch | 1.3.6.1.4.1.8708.2.4.2.8.1.1.21 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The type of the SFP used for the channel port is not the expected. A(ctivation): Invalid or mismatching SFP media is detected. D(e-activation): The correct SFP is used. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelLossOfSignal | 1.3.6.1.4.1.8708.2.4.2.8.1.1.22 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Loss of signal at the channel port. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelDescr | 1.3.6.1.4.1.8708.2.4.2.8.1.1.23 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current User configurable label. This attribute can be written via SNMP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelMaxAttenuation | 1.3.6.1.4.1.8708.2.4.2.8.1.1.24 | Unsigned32 | RO | 200 | |||||||||||||||||
column · Unsigned32 · read-only · current The max attenuation limit on channel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelMinAttenuation | 1.3.6.1.4.1.8708.2.4.2.8.1.1.25 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current The min attenuation limit on channel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelAttenControlOffset | 1.3.6.1.4.1.8708.2.4.2.8.1.1.26 | Unsigned32 (0..1000) | RW | 10 | |||||||||||||||||
column · Unsigned32 (0..1000) · read-write · current The threshold offset to max/min attenuation on the channel. If the threshold is reached, AttenControlDegraded alarm will be raised. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelAttenControlDegraded | 1.3.6.1.4.1.8708.2.4.2.8.1.1.27 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Alarm is raised when channel attenuation
is crossing threshold to max/min attenuation.
A(ctivation): Active the alarm indication.
D(e-activation): Inactive the alarm indication.Example values from LibreNMS test devices
| |||||||||||||||||||||
| CwdmCtrlChannelNotFound | 1.3.6.1.4.1.8708.2.4.2.8.1.1.28 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Channel not found. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NwdmCtrlGroupList | 1.3.6.1.4.1.8708.2.4.2.9 | ||||||||||||||||||||
| TwdmCtrlGroupTable | 1.3.6.1.4.1.8708.2.4.2.9.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RwdmCtrlGroupEntry | 1.3.6.1.4.1.8708.2.4.2.9.1.1 | NA | |||||||||||||||||||
| CwdmCtrlGroupIndex | 1.3.6.1.4.1.8708.2.4.2.9.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An index assigned to each entry. Index contains information about group number, subrack, slot and port. | |||||||||||||||||||||
| CwdmCtrlGroupName | 1.3.6.1.4.1.8708.2.4.2.9.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the group, for example 'group:1' (group:[groupNumber]). | |||||||||||||||||||||
| CwdmCtrlGroupDescr | 1.3.6.1.4.1.8708.2.4.2.9.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CwdmCtrlGroupGroupNumber | 1.3.6.1.4.1.8708.2.4.2.9.1.1.4 | Unsigned32 (1..64) | RC | ||||||||||||||||||
column · Unsigned32 (1..64) · read-create · current A unique number identifying the group. | |||||||||||||||||||||
| CwdmCtrlGroupSubrack | 1.3.6.1.4.1.8708.2.4.2.9.1.1.5 | SubrackNumber | RC | ||||||||||||||||||
column · SubrackNumber · read-create · current The number of the subrack where the monitor unit is located. | |||||||||||||||||||||
| CwdmCtrlGroupSlot | 1.3.6.1.4.1.8708.2.4.2.9.1.1.6 | SlotNumber | RC | ||||||||||||||||||
column · SlotNumber · read-create · current The number of the slot where the monitor is located. | |||||||||||||||||||||
| CwdmCtrlGroupPort | 1.3.6.1.4.1.8708.2.4.2.9.1.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The monitor port where the group is connected. Each character represents a port number, as shown: a->1, b->2, c->3, d->4, e->5, f->6, g->7, h->8.
| |||||||||||||||||||||
| CwdmCtrlGroupMonitorName | 1.3.6.1.4.1.8708.2.4.2.9.1.1.8 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the monitor port, for example 'ocm:1:2:1-A' ([monitortype]:[subrack]:[slot]:[port]). | |||||||||||||||||||||
| CwdmCtrlGroupAdminStatus | 1.3.6.1.4.1.8708.2.4.2.9.1.1.9 | BoardOrInterfaceAdminStatus | RW | ||||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the group. down - The group is de-activated. No regulations will be performed. service - The group is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The group is active. Regulations will be performed regularly and on user orders. Alarms are not suppressed. | |||||||||||||||||||||
| CwdmCtrlGroupControlMode | 1.3.6.1.4.1.8708.2.4.2.9.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current control group mode. normal - regulation is performed at the interval defined in General -> Regulation interval commissioning - the regulation is performed continuously. After 15 minutes it will change back to normal mode. Note! When control group is in commissioning mode the corresponding monitor port will still be in 'normal' mode.
| |||||||||||||||||||||
| CwdmCtrlGroupConfigurationCommand | 1.3.6.1.4.1.8708.2.4.2.9.1.1.11 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select which control mode to use: normal - regulation is performed at the interval defined in General -> Regulation interval commissioning - the regulation is performed continuously. After 15 minutes it will change back to normal mode. | |||||||||||||||||||||
| CwdmCtrlGroupForceRegulationCommand | 1.3.6.1.4.1.8708.2.4.2.9.1.1.12 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Starts a regulation manually | |||||||||||||||||||||
| CwdmCtrlGroupLockedRange | 1.3.6.1.4.1.8708.2.4.2.9.1.1.13 | Integer32 (1..30) | RW | ||||||||||||||||||
column · Integer32 (1..30) · read-write · current To avoid frequent changes of attenuation, a range can be defined around the wanted output power. A control loop will not try to adjust power values within the range. | |||||||||||||||||||||
| CwdmCtrlGroupRegulationRange | 1.3.6.1.4.1.8708.2.4.2.9.1.1.14 | Unsigned32 (0..1000) | RW | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-write · current An offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the wanted output power, the regulation stops and the alarm is raised. Applicable for normal mode. | |||||||||||||||||||||
| CwdmCtrlGroupRegulationLastChangeTime | 1.3.6.1.4.1.8708.2.4.2.9.1.1.15 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The time when the group was last regulated. | |||||||||||||||||||||
| CwdmCtrlGroupCommissioningMode | 1.3.6.1.4.1.8708.2.4.2.9.1.1.16 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the group is put in commissioning mode. A: Commissioning mode is used D: Normal mode | |||||||||||||||||||||
| CwdmCtrlGroupAssociateChannel | 1.3.6.1.4.1.8708.2.4.2.9.1.1.17 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Creates one or several control channel objects and associates them to the selected group. User needs to specify: - The board where the added channels are attenuated. - The port(s) or channel(s) of that board to add. - The wanted output power of the channel. | |||||||||||||||||||||
| CwdmCtrlGroupNoOfChannels | 1.3.6.1.4.1.8708.2.4.2.9.1.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The current number of channels associated with this group. | |||||||||||||||||||||
| CwdmCtrlGroupStatus | 1.3.6.1.4.1.8708.2.4.2.9.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The regulation status for the group
starting - the system is starting up
noRegulation - the group contains no channels to
regulate
reading - the control loop is reading the power from
the monitor
regulating - the control loop is calculating and
setting new attenuations
idle - the control loop is inactive until next
regulation
| |||||||||||||||||||||
| CwdmCtrlGroupTimeLeft | 1.3.6.1.4.1.8708.2.4.2.9.1.1.20 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The remaining time (in seconds) to next regulation. | |||||||||||||||||||||
| CwdmCtrlGroupOutputPowerMismatch | 1.3.6.1.4.1.8708.2.4.2.9.1.1.21 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The total output power of the OCM differs by more than 1.4dB from the monitor port insertion loss value of the OA. A: The total output power of the OCM differs from the monitor port insertion loss by more than 1.4dB D: Output power of OCM is within 1.4dB of the monitor port insertion loss value again | |||||||||||||||||||||
| CwdmCtrlGroupTotalPower | 1.3.6.1.4.1.8708.2.4.2.9.1.1.22 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Total power of channels associated to this group, based on OCM measurements. | |||||||||||||||||||||
| CwdmCtrlGroupChannelStartupCommand | 1.3.6.1.4.1.8708.2.4.2.9.1.1.23 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Initiates a safe startup sequence for all the channels of selected group. If the administrative status of the channel is 'down' or the channel is not detected by the monitor unit, the system attempts to detect the channel as follows: 1) The attenuation is set to its maximum value. 2) The attenuation is decreased until the channel is detected by the monitor. When the channel is detected, regulation of the channel is started, ignoring the regulation range. If the channel cannot be detected, channelStatus is set to notFound. If regulation fails, channelStatus is set to 'error' and an alarm is raised. When the startup sequence is finished, the administrative status of the channel is set to 'up'. If a regulation is ongoing when the startup procedure is initiated, the channel is put on a waiting queue until the ongoing regulation is finished. The startup queue has a limited length. If the queue is filled up with waiting channels, further startup commands will be blocked until all the queued channels have been started. | |||||||||||||||||||||
| NwdmSubChannelList | 1.3.6.1.4.1.8708.2.4.2.10 | ||||||||||||||||||||
| TwdmSubChannelTable | 1.3.6.1.4.1.8708.2.4.2.10.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RwdmSubChannelEntry | 1.3.6.1.4.1.8708.2.4.2.10.1.1 | NA | |||||||||||||||||||
| CwdmSubChannelIndex | 1.3.6.1.4.1.8708.2.4.2.10.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel. | |||||||||||||||||||||
| CwdmSubChannelName | 1.3.6.1.4.1.8708.2.4.2.10.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'channel:1:2:1-2:19' (channel:[subrack]:[slot]:[port]:[channel]). | |||||||||||||||||||||
| CwdmSubChannelId | 1.3.6.1.4.1.8708.2.4.2.10.1.1.3 | Unsigned32 (1..30) | RO | ||||||||||||||||||
column · Unsigned32 (1..30) · read-only · current The channelId within the line signal. | |||||||||||||||||||||
| CwdmSubChannelType | 1.3.6.1.4.1.8708.2.4.2.10.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Shows what format(s) this channel is used for. (e1t1, fe or gbeFe)
| |||||||||||||||||||||
| CwdmSubChannelUnequipped | 1.3.6.1.4.1.8708.2.4.2.10.1.1.5 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Shows whether the remote node has inserted payload into this channel. A: No payload is received on this channel D: Payload is received again | |||||||||||||||||||||
| CwdmSubChannelConnectionStatus | 1.3.6.1.4.1.8708.2.4.2.10.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Shows the name of the client port and possible subchannel that it is connected to or Unconnected if not connected. | |||||||||||||||||||||
| CwdmSubChannelConnectedForeignIndex | 1.3.6.1.4.1.8708.2.4.2.10.1.1.7 | Unsigned32 (0..2147483647) | RW | ||||||||||||||||||
column · Unsigned32 (0..2147483647) · read-write · current Shows the index of the connected interface. Or 0 if unconnected. | |||||||||||||||||||||
| CwdmSubChannelCrossConnect | 1.3.6.1.4.1.8708.2.4.2.10.1.1.8 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Connect a subchannel to a specific client and subchannel | |||||||||||||||||||||
| CwdmSubChannelDisconnect | 1.3.6.1.4.1.8708.2.4.2.10.1.1.9 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Disconnect existing crossConnections | |||||||||||||||||||||
| CwdmSubChannelRemoteAccessInterface | 1.3.6.1.4.1.8708.2.4.2.10.1.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Shows the name of the client port in the remote access node that terminated the sub channel. For sub channels that are not terminated in the remote node, 'Not Terminated' is shown. | |||||||||||||||||||||
| CwdmSubChannelProtectedChannelIndex | 1.3.6.1.4.1.8708.2.4.2.10.1.1.11 | Unsigned32 (0..2147483647) | RW | ||||||||||||||||||
column · Unsigned32 (0..2147483647) · read-write · current Shows the index of the protected chanel. Or 0 if not active protection. updates when protection state is changed. | |||||||||||||||||||||
| NwdmCtrlGlobal | 1.3.6.1.4.1.8708.2.4.2.11 | ||||||||||||||||||||
| SwdmCtrlGlobalRegulationInterval | 1.3.6.1.4.1.8708.2.4.2.11.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The time interval between regulations in normal mode. interval5min - 5 minutes interval interval30min - 30 minutes interval
| |||||||||||||||||||||
| SwdmCtrlGlobalRegulationStatus | 1.3.6.1.4.1.8708.2.4.2.11.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The current status of the control loop. initial - No regulation has been performed yet. searching - Trying to detect channels. reading - Reading power values from monitor unit. regulating - Adjusting power levels. idle - No regulation is ongoing.
| |||||||||||||||||||||
| SwdmCtrlGlobalLastRegulation | 1.3.6.1.4.1.8708.2.4.2.11.3 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The date and time of the last regulation. | |||||||||||||||||||||
| SwdmCtrlGlobalTimeLeft | 1.3.6.1.4.1.8708.2.4.2.11.4 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Time left to next scheduled regulation. Unit: seconds. | |||||||||||||||||||||
| NwdmDelayCompPGList | 1.3.6.1.4.1.8708.2.4.2.12 | ||||||||||||||||||||
| TwdmDelayCompPGTable | 1.3.6.1.4.1.8708.2.4.2.12.1 | NA | |||||||||||||||||||
table · not-accessible · current Delay compensation for protection groups table. | |||||||||||||||||||||
| RwdmDelayCompPGEntry | 1.3.6.1.4.1.8708.2.4.2.12.1.1 | NA | |||||||||||||||||||
| CwdmDelayCompPGIndex | 1.3.6.1.4.1.8708.2.4.2.12.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel. | |||||||||||||||||||||
| CwdmDelayCompPGName | 1.3.6.1.4.1.8708.2.4.2.12.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the entry, for example 'dcpg:1:3:17-18:1:3:19-20' (dcpg:[subrack]:[slot]:[leftporttx]-[leftportrx]:[subrack]:[slot]:[rightporttx]-[rightportrx]). | |||||||||||||||||||||
| CwdmDelayCompPGUpId | 1.3.6.1.4.1.8708.2.4.2.12.1.1.3 | Unsigned32 (1..30) | RO | ||||||||||||||||||
column · Unsigned32 (1..30) · read-only · current The UpId within the table. | |||||||||||||||||||||
| CwdmDelayCompPGAdminStatus | 1.3.6.1.4.1.8708.2.4.2.12.1.1.4 | AdminStatusWithNA | RW | ||||||||||||||||||
column · AdminStatusWithNA · read-write · current The administrative state for the object. service - The object is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The object is active. Regulations will be performed regularly and on user orders. Alarms are not suppressed. | |||||||||||||||||||||
| CwdmDelayCompPGOperStatus | 1.3.6.1.4.1.8708.2.4.2.12.1.1.5 | OperStatusWithNA | RO | ||||||||||||||||||
column · OperStatusWithNA · read-only · current The operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its transition to the 'up' state. up - The object is active. | |||||||||||||||||||||
| CwdmDelayCompPGAutoCompensationMode | 1.3.6.1.4.1.8708.2.4.2.12.1.1.6 | EnabledDisabledWithNA | RW | ||||||||||||||||||
column · EnabledDisabledWithNA · read-write · current The automatic delay compensation mode. | |||||||||||||||||||||
| CwdmDelayCompPGAutoCompensationState | 1.3.6.1.4.1.8708.2.4.2.12.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The automatic delay compensation state.
| |||||||||||||||||||||
| CwdmDelayCompPGDelayDifference | 1.3.6.1.4.1.8708.2.4.2.12.1.1.8 | Signed32WithNA | RO | ||||||||||||||||||
column · Signed32WithNA · read-only · current The current delay difference in nanoseconds, after compensation. The difference is calculated as (right line current delay) - (left line current delay). | |||||||||||||||||||||
| CwdmDelayCompPGDelayCompensationOOR | 1.3.6.1.4.1.8708.2.4.2.12.1.1.9 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Delay compensation out-of-range. alarm: The delay compensation is out-of-range. ok: The delay compensation is in range. | |||||||||||||||||||||
| CwdmDelayCompPGFiberLengthDifferenceOOR | 1.3.6.1.4.1.8708.2.4.2.12.1.1.10 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Fiber length difference out-of-range. alarm: The fiber length difference is out-of-range. ok: The fiber length difference is in range. | |||||||||||||||||||||
| CwdmDelayCompPGDelayCompensationReset | 1.3.6.1.4.1.8708.2.4.2.12.1.1.11 | ResetWithNA | RO | ||||||||||||||||||
column · ResetWithNA · read-only · current Resets the automatic delay compensation. After a successful reset the default value (normal) is restored in this attribute. | |||||||||||||||||||||
| NwdmDelayCompLinkList | 1.3.6.1.4.1.8708.2.4.2.13 | ||||||||||||||||||||
| TwdmDelayCompLinkTable | 1.3.6.1.4.1.8708.2.4.2.13.1 | NA | |||||||||||||||||||
table · not-accessible · current Delay compensation for protection group links table. | |||||||||||||||||||||
| RwdmDelayCompLinkEntry | 1.3.6.1.4.1.8708.2.4.2.13.1.1 | NA | |||||||||||||||||||
| CwdmDelayCompLinkIndex | 1.3.6.1.4.1.8708.2.4.2.13.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel. | |||||||||||||||||||||
| CwdmDelayCompLinkName | 1.3.6.1.4.1.8708.2.4.2.13.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the entry, for example 'dclink:1:3:17-18' (dclink:[subrack]:[slot]:[porttx]-[portrx]). | |||||||||||||||||||||
| CwdmDelayCompLinkUpId | 1.3.6.1.4.1.8708.2.4.2.13.1.1.3 | Unsigned32 (1..30) | RO | ||||||||||||||||||
column · Unsigned32 (1..30) · read-only · current The UpId within the table. | |||||||||||||||||||||
| CwdmDelayCompLinkCurrentDelayCompensation | 1.3.6.1.4.1.8708.2.4.2.13.1.1.4 | Signed32WithNA (0..47233) | RO | ||||||||||||||||||
column · Signed32WithNA (0..47233) · read-only · current The current delay compensation in nanoseconds. Note, the granularity of this value is determined by the hardware capabilities. | |||||||||||||||||||||
| CwdmDelayCompLinkWantedDelayCompensation | 1.3.6.1.4.1.8708.2.4.2.13.1.1.5 | Signed32WithNA (0..47233) | RW | ||||||||||||||||||
column · Signed32WithNA (0..47233) · read-write · current The wanted delay compensation in nanoseconds. Note, this value is only used by the system when automatic delay compensation mode is disabled. | |||||||||||||||||||||
| NwdmMeanChannelPowerControlGlobalList | 1.3.6.1.4.1.8708.2.4.2.14 | ||||||||||||||||||||
| TwdmMeanChannelPowerControlGlobalTable | 1.3.6.1.4.1.8708.2.4.2.14.1 | NA | |||||||||||||||||||
table · not-accessible · current Bogus table to hold one entry with a dialog attribute to create entries in another table. | |||||||||||||||||||||
| RwdmMeanChannelPowerControlGlobalEntry | 1.3.6.1.4.1.8708.2.4.2.14.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A list of links where the channel power will be adjusted | |||||||||||||||||||||
| CwdmMeanChannelPowerControlGlobalIndex | 1.3.6.1.4.1.8708.2.4.2.14.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlGlobalName | 1.3.6.1.4.1.8708.2.4.2.14.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of this bogus entry, that only exists to create other entries. 'bogus' | |||||||||||||||||||||
| CwdmMeanChannelPowerControlGlobalEntryCreate | 1.3.6.1.4.1.8708.2.4.2.14.1.1.3 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Creates a wdmMeanChannelPowerControl entry in another table | |||||||||||||||||||||
| NwdmMeanChannelPowerControlList | 1.3.6.1.4.1.8708.2.4.2.15 | ||||||||||||||||||||
| TwdmMeanChannelPowerControlTable | 1.3.6.1.4.1.8708.2.4.2.15.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of local links to balance channel power on | |||||||||||||||||||||
| RwdmMeanChannelPowerControlEntry | 1.3.6.1.4.1.8708.2.4.2.15.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A list of links where the channel power will be adjusted | |||||||||||||||||||||
| CwdmMeanChannelPowerControlIndex | 1.3.6.1.4.1.8708.2.4.2.15.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlName | 1.3.6.1.4.1.8708.2.4.2.15.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the local link adjustment entry 'meanChannelPowerControl:1:2:1' (meanChannelPowerControl[oa subrack]:[oa slot]:[oa port]). | |||||||||||||||||||||
| CwdmMeanChannelPowerControlDescr | 1.3.6.1.4.1.8708.2.4.2.15.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlOcmSubrack | 1.3.6.1.4.1.8708.2.4.2.15.1.1.4 | SubrackNumber | RC | ||||||||||||||||||
column · SubrackNumber · read-create · current The subrack number of the ocm reading the oa monitor port. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlOcmSlot | 1.3.6.1.4.1.8708.2.4.2.15.1.1.5 | SlotNumber | RC | ||||||||||||||||||
column · SlotNumber · read-create · current The slot number of the ocm reading the oa monitor port. channel is attenuated. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlOcmPort | 1.3.6.1.4.1.8708.2.4.2.15.1.1.6 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The monitor port of this local link adjustment loop.
| |||||||||||||||||||||
| CwdmMeanChannelPowerControlOaSubrack | 1.3.6.1.4.1.8708.2.4.2.15.1.1.7 | SubrackNumber | RO | ||||||||||||||||||
column · SubrackNumber · read-only · current The subrack number of the oa that is being controlled by this local link adjustment entry | |||||||||||||||||||||
| CwdmMeanChannelPowerControlOaSlot | 1.3.6.1.4.1.8708.2.4.2.15.1.1.8 | SlotNumber | RO | ||||||||||||||||||
column · SlotNumber · read-only · current The slot number of the oa that is being controlled by this local link adjustment entry | |||||||||||||||||||||
| CwdmMeanChannelPowerControlOaPort | 1.3.6.1.4.1.8708.2.4.2.15.1.1.9 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The port number of the oa that is being controlled by this local link adjustment entry | |||||||||||||||||||||
| CwdmMeanChannelPowerControlMonitorName | 1.3.6.1.4.1.8708.2.4.2.15.1.1.10 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the monitor port, for example 'ocm:1:2:1-A' ([monitortype]:[subrack]:[slot]:[port]). | |||||||||||||||||||||
| CwdmMeanChannelPowerControlAdminStatus | 1.3.6.1.4.1.8708.2.4.2.15.1.1.11 | AdminStatusWithNA | RW | ||||||||||||||||||
column · AdminStatusWithNA · read-write · current The administrative state for the local link adjustment entry. down - The link adjustment is disabled service - The link is adjusting the channel power but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The link adjustment is active. Regulations will be performed regularly and on user orders. Alarms are not suppressed. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlOperStatus | 1.3.6.1.4.1.8708.2.4.2.15.1.1.12 | BoardOrInterfaceOperStatus | RO | ||||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the control group down - The control group cannot operate due to missing resources or other complications up - The control group is active | |||||||||||||||||||||
| CwdmMeanChannelPowerControlStartRegulation | 1.3.6.1.4.1.8708.2.4.2.15.1.1.13 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Starts a regulation manually | |||||||||||||||||||||
| CwdmMeanChannelPowerControlRegulationRange | 1.3.6.1.4.1.8708.2.4.2.15.1.1.14 | Unsigned32 (0..1000) | RW | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-write · current An offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the wanted output power, the regulation stops and the alarm is raised. Applicable for normal mode. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlLatestRegulation | 1.3.6.1.4.1.8708.2.4.2.15.1.1.15 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The time when the link was last regulated. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlLatestChange | 1.3.6.1.4.1.8708.2.4.2.15.1.1.16 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The time when the link was latest adjusted | |||||||||||||||||||||
| CwdmMeanChannelPowerControlMonitorOffsetCalibrationFailed | 1.3.6.1.4.1.8708.2.4.2.15.1.1.17 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when calibration of the OCM port fails. A: calibration of OCM port failed D: Normal mode | |||||||||||||||||||||
| CwdmMeanChannelPowerControlRegulationState | 1.3.6.1.4.1.8708.2.4.2.15.1.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The regulation status for the link
starting - the local link adjustment loop is
reading the power from the
monitor
regulating - the local link adjustment loop
is calculating and setting new
attenuation / wanted gain
idle - the local link adjustment loop is
inactive until next regulation
| |||||||||||||||||||||
| CwdmMeanChannelPowerControlTimeToNextRegulation | 1.3.6.1.4.1.8708.2.4.2.15.1.1.19 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The remaining time (in minutes) to next regulation. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlWantedChannelPower | 1.3.6.1.4.1.8708.2.4.2.15.1.1.20 | Integer32 (-150..100) | RW | ||||||||||||||||||
column · Integer32 (-150..100) · read-write · current The wanted output power. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlCurrentChannelPower | 1.3.6.1.4.1.8708.2.4.2.15.1.1.21 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The actual output power. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlCurrentGain | 1.3.6.1.4.1.8708.2.4.2.15.1.1.22 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current OA signal gain set by the local link adjustment loop | |||||||||||||||||||||
| CwdmMeanChannelPowerControlTotalChannelOutputPower | 1.3.6.1.4.1.8708.2.4.2.15.1.1.23 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Total channel output power | |||||||||||||||||||||
| CwdmMeanChannelPowerControlNumberOfChannels | 1.3.6.1.4.1.8708.2.4.2.15.1.1.24 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Number of channels read from OCM | |||||||||||||||||||||
| CwdmMeanChannelPowerControlAbsolutePowerOffset | 1.3.6.1.4.1.8708.2.4.2.15.1.1.25 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Absolute power offset | |||||||||||||||||||||
| CwdmMeanChannelPowerControlRemainingPowerOffset | 1.3.6.1.4.1.8708.2.4.2.15.1.1.26 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Remaining power offset | |||||||||||||||||||||
| CwdmMeanChannelPowerControlMonitorOffsetTooLarge | 1.3.6.1.4.1.8708.2.4.2.15.1.1.27 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the OCM monitor port offset is too large A: OCM port offset too large D: Normal mode | |||||||||||||||||||||
| CwdmMeanChannelPowerControlChannelPowerOutOfRange | 1.3.6.1.4.1.8708.2.4.2.15.1.1.28 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the incomming channelpower is too high or too low to regulate to the wanted mean channel power A: channel power out of range D: Normal mode | |||||||||||||||||||||
| CwdmMeanChannelPowerControlRegulationInterval | 1.3.6.1.4.1.8708.2.4.2.15.1.1.29 | Unsigned32 (10..30) | RW | ||||||||||||||||||
column · Unsigned32 (10..30) · read-write · current Minimum time between two regulations, a random wait time of up to 15 seconds is added to this value when calculating when the next regulation should occurr. | |||||||||||||||||||||
| CwdmMeanChannelPowerControlAmplifierOutputPort | 1.3.6.1.4.1.8708.2.4.2.15.1.1.30 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the OA port controlled by this control loop | |||||||||||||||||||||
| CwdmMeanChannelPowerControlLatestAmplifierRxPower | 1.3.6.1.4.1.8708.2.4.2.15.1.1.31 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The latest amplifier input power | |||||||||||||||||||||
| CwdmMeanChannelPowerControlLatestAmplifierTxPower | 1.3.6.1.4.1.8708.2.4.2.15.1.1.32 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The latest amplifier output power | |||||||||||||||||||||
| CwdmMeanChannelPowerControlLocalId | 1.3.6.1.4.1.8708.2.4.2.15.1.1.33 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Store the local ID since it will be needed when reading backup | |||||||||||||||||||||
Traps / Notifications
- wdmIfLaserStatusOff
1.3.6.1.4.1.8708.2.4.2.4.0.9 - wdmIfLaserStatusOn
1.3.6.1.4.1.8708.2.4.2.4.0.8 - wdmProtOperStatusBothDown
1.3.6.1.4.1.8708.2.4.2.4.0.1 - wdmProtOperStatusLeftDownRightStandby
1.3.6.1.4.1.8708.2.4.2.4.0.3 - wdmProtOperStatusLeftDownRightUp
1.3.6.1.4.1.8708.2.4.2.4.0.2 - wdmProtOperStatusLeftStandbyRightDown
1.3.6.1.4.1.8708.2.4.2.4.0.4 - wdmProtOperStatusLeftStandbyRightUp
1.3.6.1.4.1.8708.2.4.2.4.0.5 - wdmProtOperStatusLeftUpRightDown
1.3.6.1.4.1.8708.2.4.2.4.0.6 - wdmProtOperStatusLeftUpRightStandby
1.3.6.1.4.1.8708.2.4.2.4.0.7 - wdmProtStatusChanged
1.3.6.1.4.1.8708.2.4.2.4.0.10
Groups and compliance
- lumWdmBasicComplV1
- lumWdmBasicComplV10
- lumWdmBasicComplV11
- lumWdmBasicComplV12
- lumWdmBasicComplV13
- lumWdmBasicComplV14
- lumWdmBasicComplV15
- lumWdmBasicComplV16
- lumWdmBasicComplV17
- lumWdmBasicComplV18
- lumWdmBasicComplV19
- lumWdmBasicComplV2
- lumWdmBasicComplV20
- lumWdmBasicComplV21
- lumWdmBasicComplV22
- lumWdmBasicComplV23
- lumWdmBasicComplV24
- lumWdmBasicComplV25
- lumWdmBasicComplV26
- lumWdmBasicComplV27
- lumWdmBasicComplV28
- lumWdmBasicComplV29
- lumWdmBasicComplV3
- lumWdmBasicComplV30
- lumWdmBasicComplV31
- lumWdmBasicComplV32
- lumWdmBasicComplV33
- lumWdmBasicComplV34
- lumWdmBasicComplV35
- lumWdmBasicComplV36
- lumWdmBasicComplV37
- lumWdmBasicComplV38
- lumWdmBasicComplV39
- lumWdmBasicComplV4
- lumWdmBasicComplV40
- lumWdmBasicComplV41
- lumWdmBasicComplV42
- lumWdmBasicComplV43
- lumWdmBasicComplV44
- lumWdmBasicComplV45
- lumWdmBasicComplV46
- lumWdmBasicComplV47
- lumWdmBasicComplV5
- lumWdmBasicComplV6
- lumWdmBasicComplV7
- lumWdmBasicComplV8
- lumWdmBasicComplV9
- lumWdmMinimalComplV1
- lumWdmMinimalComplV2
- lumWdmMinimalComplV3
- lumWdmMinimalComplV4
- wdmCtrlChannelGroup
- wdmCtrlChannelGroupV2
- wdmCtrlChannelGroupV3
- wdmCtrlChannelGroupV4
- wdmCtrlChannelGroupV5
- wdmCtrlGlobalGroup
- wdmCtrlGroupGroup
- wdmCtrlGroupGroupV2
- wdmCtrlGroupGroupV3
- wdmCtrlGroupGroupV4
- wdmCtrlGroupGroupV5
- wdmDelayCompLinkGroup
- wdmDelayCompPGGroup
- wdmGeneralGroup
- wdmGeneralGroupV2
- wdmGeneralGroupV3
- wdmGeneralGroupV4
- wdmGeneralGroupV5
- wdmGeneralGroupV6
- wdmGeneralGroupV7
- wdmGeneralMinimalGroupV1
- wdmIfGroup
- wdmIfGroupV10
- wdmIfGroupV11
- wdmIfGroupV12
- wdmIfGroupV13
- wdmIfGroupV14
- wdmIfGroupV15
- wdmIfGroupV16
- wdmIfGroupV17
- wdmIfGroupV18
- wdmIfGroupV19
- wdmIfGroupV2
- wdmIfGroupV20
- wdmIfGroupV21
- wdmIfGroupV22
- wdmIfGroupV23
- wdmIfGroupV24
- wdmIfGroupV25
- wdmIfGroupV26
- wdmIfGroupV27
- wdmIfGroupV28
- wdmIfGroupV29
- wdmIfGroupV3
- wdmIfGroupV30
- wdmIfGroupV31
- wdmIfGroupV4
- wdmIfGroupV5
- wdmIfGroupV6
- wdmIfGroupV7
- wdmIfGroupV8
- wdmIfGroupV9
- wdmIfMinimalGroupV1
- wdmIfMinimalGroupV2
- wdmMeanChannelPowerControlGlobalGroupV1
- wdmMeanChannelPowerControlGroupV1
- wdmNotificationGroup
- wdmNotificationGroupV2
- wdmPassiveIfGroup
- wdmPassiveIfGroupV2
- wdmPassiveIfGroupV3
- wdmPassiveIfGroupV4
- wdmPassiveIfGroupV5
- wdmPassiveIfGroupV6
- wdmPassiveIfGroupV7
- wdmPassiveIfMinimalGroupV1
- wdmPassiveIfMinimalGroupV2
- wdmProtGroup
- wdmProtGroupV2
- wdmProtGroupV3
- wdmProtGroupV4
- wdmProtGroupV5
- wdmProtGroupV6
- wdmProtGroupV7
- wdmProtGroupV8
- wdmProtGroupV9
- wdmRemoteProtGroup
- wdmSubChannelGroup
- wdmSubChannelGroupV2
- wdmVc4Group
- wdmVc4GroupV2