LUM-OCM-MIB
Nokia (formerly 'Lumentis AB')The optical control interface MIB. - General - Monitor interfaces Note that, every time a get operation is performed and both ports are set to admin status up, the switch will switch to update both ports. (unless commissioning mode) The guaranteed durability of switching is 10 million times. That means, if you switch (perform a get operation) more than every 50 second, product lifetime of 15 years can not be guaranteed.
snmptranslate -m LUM-OCM-MIB -Tpsnmpwalk -v2c -c <community> -m LUM-OCM-MIB <host> 1.3.6.1.4.1.8708.1.1.33Imports
| LUM-REG | lumModules, lumOcmMIB |
|---|---|
| LUM-TC | BoardOrInterfaceAdminStatus, BoardOrInterfaceOperStatus, CommandString, FaultStatus, LambdaFrequency, MgmtNameString, PortNumber, SlotNumber, SubrackNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IlumOcmMIBModule | 1.3.6.1.4.1.8708.1.1.33 | ||||||||||||||||||||
identity The optical control interface MIB. - General - Monitor interfaces Note that, every time a get operation is performed and both ports are set to admin status up, the switch will switch to update both ports. (unless commissioning mode) The guaranteed durability of switching is 10 million times. That means, if you switch (perform a get operation) more than every 50 second, product lifetime of 15 years can not be guaranteed. | |||||||||||||||||||||
| NlumOcmConfs | 1.3.6.1.4.1.8708.2.33.1 | ||||||||||||||||||||
| NlumOcmGroups | 1.3.6.1.4.1.8708.2.33.1.1 | ||||||||||||||||||||
| GocmGeneralGroup | 1.3.6.1.4.1.8708.2.33.1.1.1 | ||||||||||||||||||||
group · current The general objects. | |||||||||||||||||||||
| GocmIfGroup | 1.3.6.1.4.1.8708.2.33.1.1.2 | deprecated | |||||||||||||||||||
group · deprecated The ocm interface objects.
| |||||||||||||||||||||
| GocmChannelGroup | 1.3.6.1.4.1.8708.2.33.1.1.3 | deprecated | |||||||||||||||||||
group · deprecated The ocm channel objects. | |||||||||||||||||||||
| GocmIfGroupV2 | 1.3.6.1.4.1.8708.2.33.1.1.4 | deprecated | |||||||||||||||||||
group · deprecated The ocm interface objects.
| |||||||||||||||||||||
| GocmIfGroupV3 | 1.3.6.1.4.1.8708.2.33.1.1.5 | deprecated | |||||||||||||||||||
group · deprecated The ocm interface objects.
| |||||||||||||||||||||
| GocmChannelGroupV2 | 1.3.6.1.4.1.8708.2.33.1.1.6 | ||||||||||||||||||||
group · current The ocm channel objects. | |||||||||||||||||||||
| GocmIfGroupV4 | 1.3.6.1.4.1.8708.2.33.1.1.7 | ||||||||||||||||||||
group · current The ocm interface objects.
| |||||||||||||||||||||
| NlumOcmCompl | 1.3.6.1.4.1.8708.2.33.1.2 | ||||||||||||||||||||
| MlumOcmBasicComplV1 | 1.3.6.1.4.1.8708.2.33.1.2.1 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OCM MIB V1.
| |||||||||||||||||||||
| MlumOcmBasicComplV2 | 1.3.6.1.4.1.8708.2.33.1.2.2 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OCM MIB V2 (14.0).
| |||||||||||||||||||||
| MlumOcmBasicComplV3 | 1.3.6.1.4.1.8708.2.33.1.2.3 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OCM MIB V2 (23.0).
| |||||||||||||||||||||
| MlumOcmBasicComplV4 | 1.3.6.1.4.1.8708.2.33.1.2.4 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OCM MIB V2 (30.0).
| |||||||||||||||||||||
| MlumOcmBasicComplV5 | 1.3.6.1.4.1.8708.2.33.1.2.5 | ||||||||||||||||||||
compliance · current Basic implementation requirements for the OCM MIB V2 (31.0).
| |||||||||||||||||||||
| NlumOcmMinimalGroups | 1.3.6.1.4.1.8708.2.33.1.3 | ||||||||||||||||||||
| NlumOcmMinimalCompl | 1.3.6.1.4.1.8708.2.33.1.4 | ||||||||||||||||||||
| MlumOcmMinimalComplV1 | 1.3.6.1.4.1.8708.2.33.1.4.1 | ||||||||||||||||||||
compliance · current Minimal implementation requirements for the OCM MIB V1.
| |||||||||||||||||||||
| NlumOcmMIBObjects | 1.3.6.1.4.1.8708.2.33.2 | ||||||||||||||||||||
| NocmGeneral | 1.3.6.1.4.1.8708.2.33.2.1 | ||||||||||||||||||||
| SocmGeneralLastChangeTime | 1.3.6.1.4.1.8708.2.33.2.1.1 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the MIB was last changed. | |||||||||||||||||||||
| SocmGeneralStateLastChangeTime | 1.3.6.1.4.1.8708.2.33.2.1.2 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the state of the MIB was last changed. | |||||||||||||||||||||
| SocmGeneralOcmIfTableSize | 1.3.6.1.4.1.8708.2.33.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SocmGeneralOcmChannelTableSize | 1.3.6.1.4.1.8708.2.33.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| NocmIfList | 1.3.6.1.4.1.8708.2.33.2.2 | ||||||||||||||||||||
| TocmIfTable | 1.3.6.1.4.1.8708.2.33.2.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RocmIfEntry | 1.3.6.1.4.1.8708.2.33.2.2.1.1 | NA | |||||||||||||||||||
| CocmIfIndex | 1.3.6.1.4.1.8708.2.33.2.2.1.1.1 | Unsigned32 (1..2147483647) | RO | 1025 | |||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfName | 1.3.6.1.4.1.8708.2.33.2.2.1.1.2 | MgmtNameString | RO | ocm:1:16:1-A | |||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'ocm:1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: ocm:s:s:p - Optical channel module interface Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfDescr | 1.3.6.1.4.1.8708.2.33.2.2.1.1.3 | DisplayString | RW | Monitor nach xy | |||||||||||||||||
column · DisplayString · read-write · current User configurable label. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfSubrack | 1.3.6.1.4.1.8708.2.33.2.2.1.1.4 | SubrackNumber | RC | 1 | |||||||||||||||||
column · SubrackNumber · read-create · current The number of the subrack where the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfSlot | 1.3.6.1.4.1.8708.2.33.2.2.1.1.5 | SlotNumber | RC | 16 | |||||||||||||||||
column · SlotNumber · read-create · current The number of the slot where the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfRxPort | 1.3.6.1.4.1.8708.2.33.2.2.1.1.6 | PortNumber | RC | 1 | |||||||||||||||||
column · PortNumber · read-create · current The number of the port where the RX-side of the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfInvPhysIndexOrZero | 1.3.6.1.4.1.8708.2.33.2.2.1.1.7 | Unsigned32 (0..2147483647) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current The row in the invPhysTable for this interface. Set to 0 if not known. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfAdminStatus | 1.3.6.1.4.1.8708.2.33.2.2.1.1.8 | BoardOrInterfaceAdminStatus | RW | 3 | |||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfOperStatus | 1.3.6.1.4.1.8708.2.33.2.2.1.1.9 | BoardOrInterfaceOperStatus | RO | 3 | |||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventing it from going to the 'up'-state. up - The interface is operational. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfPowerThreshold | 1.3.6.1.4.1.8708.2.33.2.2.1.1.12 | Integer32 (-50..100) | RC | -24 | |||||||||||||||||
column · Integer32 (-50..100) · read-create · current The threshold for power levels. If the measured power level is below the threshold, it is regarded as no signal. For OCM8p: Default -13dBm Range -35 to 100dBm For OCM2p: Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfUpdateLastChangeTime | 1.3.6.1.4.1.8708.2.33.2.2.1.1.13 | DateAndTime | RO | 07:e5:04:06:10:37:0c:00:2b:02:00 | |||||||||||||||||
column · DateAndTime · read-only · current The time when the last measurement was done. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfConnectedSubrack | 1.3.6.1.4.1.8708.2.33.2.2.1.1.14 | SubrackNumber | RC | 1 | |||||||||||||||||
column · SubrackNumber · read-create · current The number of the subrack where the connected interface is located. (0 is not valid) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfConnectedSlot | 1.3.6.1.4.1.8708.2.33.2.2.1.1.15 | SlotNumber | RC | 15 | |||||||||||||||||
column · SlotNumber · read-create · current The number of the slot where the connected interface is located. (not possible to set 0, 1, 19-22, oa/roadm can not be placed in those slots) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfConnectedPort | 1.3.6.1.4.1.8708.2.33.2.2.1.1.16 | PortNumber | RC | 3 | |||||||||||||||||
column · PortNumber · read-create · current The number of the connected port. (the tx port number). 1 or 3 for OA, 5 for 1x2ROADM/100G/50G, 9 for 1x4ROADM/100G,ROADM1x4f, 17 for 1x8ROADM/50G, 19 for ROADM1x9f, 1 for OA26C, 5 for OARAED21HG 81 for MDU40. and 1 to 82 for other boards. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfActivePort | 1.3.6.1.4.1.8708.2.33.2.2.1.1.17 | PortNumber | RO | 1 | |||||||||||||||||
column · PortNumber · read-only · current The number of the active port. Only valid when commissioning mode. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfControlMode | 1.3.6.1.4.1.8708.2.33.2.2.1.1.18 | INTEGER | RO | normal(1) | |||||||||||||||||
column · INTEGER · read-only · current What mode the ocm is in. normal - the switch toggle every hour and measure both ports. commissioning - the switch is set to one active port and measurement is made continuously on this port. After 15 minutes it will change back to normal mode. Note that it is not possible to get updated values on port that is not chosen as active during commissioning mode.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfReferenceTime | 1.3.6.1.4.1.8708.2.33.2.2.1.1.21 | DisplayString | RC | | |||||||||||||||||
column · DisplayString · read-create · current Time where reference values were saved. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfSwitchFailure | 1.3.6.1.4.1.8708.2.33.2.2.1.1.22 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Switch failure. A: The switch is stuck and it is not possible to change port. It is not sure if it the values comes from the expected port. D: The switch works as expected. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfDataSourceNotDefined | 1.3.6.1.4.1.8708.2.33.2.2.1.1.23 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Data source not defined, A: No connected slot, connected subrack nor connected port is defined. D: Connected slot, connected subrack and connected port is ok. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfCommissioningMode | 1.3.6.1.4.1.8708.2.33.2.2.1.1.24 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Data source not defined, A: Commissioning mode is used D: Normal mode Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfModuleFailure | 1.3.6.1.4.1.8708.2.33.2.2.1.1.25 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The module HW has detected a failure. A: The module has failed D: The module is OK again Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfConfigurationCommand | 1.3.6.1.4.1.8708.2.33.2.2.1.1.26 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select which control mode to use. normal - the switch toggle every hour and measure both ports. commissioning - the switch is set to one port while adjusting surrounding boards. | |||||||||||||||||||||
| CocmIfChangeConnectedPort | 1.3.6.1.4.1.8708.2.33.2.2.1.1.27 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select which monitor port that is connected to this ocm port. | |||||||||||||||||||||
| CocmIfSaveReference | 1.3.6.1.4.1.8708.2.33.2.2.1.1.28 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Save current measurement as reference values | |||||||||||||||||||||
| CocmIfPowerOffset | 1.3.6.1.4.1.8708.2.33.2.2.1.1.29 | Integer32 (0..350) | RC | 198 | |||||||||||||||||
column · Integer32 (0..350) · read-create · current An offset value added to all power levels to get an accurate presentation of channel powers at the line port. Generally offset values depends upon board type connected. oa - 20.0 roadm - 17.0 oa26c - 20.0 mdu40 - 20.0 other - 20.0 oaraed21hg - 20.0 oaraed20lg - 20.0 OA boards have more accurate values for power offset named Monitor port insertion loss visible in the OA interface. Note however that the reference power level values are not affected by a change of this offset. A new reference calculation should be made after a change. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfConnectedBoardType | 1.3.6.1.4.1.8708.2.33.2.2.1.1.30 | INTEGER | RC | oa(1) | |||||||||||||||||
column · INTEGER · read-create · current What board type that is connected to the ocm. The power offset default value is changed based on the chosen board type. Please note that this function is not applicable for mdu40lite boards.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfChangeConnectedBoardType | 1.3.6.1.4.1.8708.2.33.2.2.1.1.31 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select board type for the monitor port connected to this ocm port. | |||||||||||||||||||||
| CocmIfMaxPowerLevel | 1.3.6.1.4.1.8708.2.33.2.2.1.1.32 | Integer32 | RO | 11 | |||||||||||||||||
column · Integer32 · read-only · current The maximum received power level for this port in units of 0.1 dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfMinPowerLevel | 1.3.6.1.4.1.8708.2.33.2.2.1.1.33 | Integer32 | RO | 8 | |||||||||||||||||
column · Integer32 · read-only · current The minimum received power level for this port in units of 0.1 dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfDeltaPower | 1.3.6.1.4.1.8708.2.33.2.2.1.1.34 | Integer32 | RO | 3 | |||||||||||||||||
column · Integer32 · read-only · current The difference between the maximum and the minimum received power level for this port in units of 0.1 dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfChangePowerThreshold | 1.3.6.1.4.1.8708.2.33.2.2.1.1.35 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select the power threshold for this ocm port. If the measured power level is below the threshold, it is regarded as no signal. | |||||||||||||||||||||
| CocmIfChangePowerOffset | 1.3.6.1.4.1.8708.2.33.2.2.1.1.36 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select the power offset for this ocm port. The power offset is a value added to all power levels to get an accurate presentation of channel powers at the line port. | |||||||||||||||||||||
| CocmIfPowerOffsetAdjustment | 1.3.6.1.4.1.8708.2.33.2.2.1.1.37 | Integer32 (0..350) | RO | 0 | |||||||||||||||||
column · Integer32 (0..350) · read-only · current An offset adjustment added to the power offset to mitigate the effects of differences between actual power measured at the OCM and the configured power offset value. This adjustment allows the optical control loop to regulate with better precision. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfSpacingMode | 1.3.6.1.4.1.8708.2.33.2.2.1.1.38 | INTEGER | RC | spacing50GHz(1) | |||||||||||||||||
column · INTEGER · read-create · current Spacing mode is configured for monitoring channel power with the channel spacing of 50GHz. spacing50GHz: interface with channels in 50 GHz intervals
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CocmIfHighInputPower | 1.3.6.1.4.1.8708.2.33.2.2.1.1.39 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The OCM module has detected a high input power.
A: OCM module has dectected high input power (above 20dBm)
on particular port.
D: Optical input power is within the limit (below 20dBm).Example values from LibreNMS test devices
| |||||||||||||||||||||
| NocmChannelList | 1.3.6.1.4.1.8708.2.33.2.3 | ||||||||||||||||||||
| TocmChannelTable | 1.3.6.1.4.1.8708.2.33.2.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The channel list. | |||||||||||||||||||||
| RocmChannelEntry | 1.3.6.1.4.1.8708.2.33.2.3.1.1 | NA | |||||||||||||||||||
| CocmChannelIndex | 1.3.6.1.4.1.8708.2.33.2.3.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. | |||||||||||||||||||||
| CocmChannelName | 1.3.6.1.4.1.8708.2.33.2.3.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'ocm:1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: ocm:s:s:p - Optical channel module interface | |||||||||||||||||||||
| CocmChannelFrequency | 1.3.6.1.4.1.8708.2.33.2.3.1.1.3 | LambdaFrequency | RC | ||||||||||||||||||
column · LambdaFrequency · read-create · current Freqency in hundreds of GHz (0.01 GHz). | |||||||||||||||||||||
| CocmChannelPowerLevel | 1.3.6.1.4.1.8708.2.33.2.3.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The received power level in units of 0.1 dBm. | |||||||||||||||||||||
| CocmChannelUpdateLastChangeTime | 1.3.6.1.4.1.8708.2.33.2.3.1.1.5 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current Time when last measurement was done. | |||||||||||||||||||||
| CocmChannelOcmRefIfIndex | 1.3.6.1.4.1.8708.2.33.2.3.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The SNMP-index of the OCM i/f object related to this object. | |||||||||||||||||||||
| CocmChannelReferencePowerLevel | 1.3.6.1.4.1.8708.2.33.2.3.1.1.7 | Integer32 (-1000..1000) | RC | ||||||||||||||||||
column · Integer32 (-1000..1000) · read-create · current The reference power level in units of 0.1 dBm. | |||||||||||||||||||||
| CocmChannelReferenceTime | 1.3.6.1.4.1.8708.2.33.2.3.1.1.8 | DisplayString | RC | ||||||||||||||||||
column · DisplayString · read-create · current Time where reference values were saved. | |||||||||||||||||||||
| CocmChannelSaveReference | 1.3.6.1.4.1.8708.2.33.2.3.1.1.9 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Save current measurement as reference values | |||||||||||||||||||||
| NlumentisOcmNotifications | 1.3.6.1.4.1.8708.2.33.2.4 | ||||||||||||||||||||