LUM-OA-MIB
Nokia (formerly 'Lumentis AB')The optical amplifier interface MIB. - General - Amplifier interfaces
snmptranslate -m LUM-OA-MIB -Tpsnmpwalk -v2c -c <community> -m LUM-OA-MIB <host> 1.3.6.1.4.1.8708.1.1.20Imports
| LUM-REG | lumModules, lumOaMIB |
|---|---|
| LUM-TC | BoardOrInterfaceAdminStatus, BoardOrInterfaceOperStatus, CommandString, FaultStatus, LambdaFrequency, MgmtNameString, ObjectProperty, PortNumber, SlotNumber, SubrackNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IlumOaMIBModule | 1.3.6.1.4.1.8708.1.1.20 | ||||||||||||||||||||
identity The optical amplifier interface MIB. - General - Amplifier interfaces | |||||||||||||||||||||
| NlumOaConfs | 1.3.6.1.4.1.8708.2.19.1 | ||||||||||||||||||||
| NlumOaGroups | 1.3.6.1.4.1.8708.2.19.1.1 | ||||||||||||||||||||
| GoaGeneralGroup | 1.3.6.1.4.1.8708.2.19.1.1.1 | deprecated | |||||||||||||||||||
| GoaIfGroup | 1.3.6.1.4.1.8708.2.19.1.1.2 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects.
| |||||||||||||||||||||
| GoaIfGroupV2 | 1.3.6.1.4.1.8708.2.19.1.1.3 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects.
| |||||||||||||||||||||
| GoaIfGroupV3 | 1.3.6.1.4.1.8708.2.19.1.1.4 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects.
| |||||||||||||||||||||
| GoaGeneralGroupV2 | 1.3.6.1.4.1.8708.2.19.1.1.5 | ||||||||||||||||||||
group · current The general objects. (3.1) | |||||||||||||||||||||
| GoaIfGroupV4 | 1.3.6.1.4.1.8708.2.19.1.1.6 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (3.2)
| |||||||||||||||||||||
| GoaIfGroupV5 | 1.3.6.1.4.1.8708.2.19.1.1.7 | ||||||||||||||||||||
group · current The oa interface objects. (4.0)
| |||||||||||||||||||||
| GoaIfGroupV6 | 1.3.6.1.4.1.8708.2.19.1.1.8 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (5.0)
| |||||||||||||||||||||
| GoaVoaIfGroupV1 | 1.3.6.1.4.1.8708.2.19.1.1.9 | ||||||||||||||||||||
group · current The voa interface objects. (5.0)
| |||||||||||||||||||||
| GoaIfGroupV7 | 1.3.6.1.4.1.8708.2.19.1.1.10 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (6.0)
| |||||||||||||||||||||
| GoaIfGroupV8 | 1.3.6.1.4.1.8708.2.19.1.1.11 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (10.0)
| |||||||||||||||||||||
| GoaVoaClientIfGroupV1 | 1.3.6.1.4.1.8708.2.19.1.1.12 | deprecated | |||||||||||||||||||
group · deprecated The voa client interface objects. (10.0)
| |||||||||||||||||||||
| GoaVoaLineIfGroupV1 | 1.3.6.1.4.1.8708.2.19.1.1.13 | ||||||||||||||||||||
group · current The voa line interface objects. (10.0) | |||||||||||||||||||||
| GoaGeneralGroupV3 | 1.3.6.1.4.1.8708.2.19.1.1.14 | deprecated | |||||||||||||||||||
group · deprecated The general objects. (10.0) | |||||||||||||||||||||
| GoaVoaClientIfGroupV2 | 1.3.6.1.4.1.8708.2.19.1.1.15 | deprecated | |||||||||||||||||||
group · deprecated The voa client interface objects. (11.0)
| |||||||||||||||||||||
| GoaModuleGroupV1 | 1.3.6.1.4.1.8708.2.19.1.1.16 | deprecated | |||||||||||||||||||
group · deprecated The module objects. (11.0) | |||||||||||||||||||||
| GoaGeneralGroupV4 | 1.3.6.1.4.1.8708.2.19.1.1.17 | ||||||||||||||||||||
group · current The general objects. (11.0) | |||||||||||||||||||||
| GoaIfGroupV9 | 1.3.6.1.4.1.8708.2.19.1.1.18 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (11.0)
| |||||||||||||||||||||
| GoaModuleGroupV2 | 1.3.6.1.4.1.8708.2.19.1.1.19 | deprecated | |||||||||||||||||||
group · deprecated The module objects. (12.0)
| |||||||||||||||||||||
| GoaIfGroupV10 | 1.3.6.1.4.1.8708.2.19.1.1.20 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (15.0)
| |||||||||||||||||||||
| GoaIfGroupV11 | 1.3.6.1.4.1.8708.2.19.1.1.21 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (17.0)
| |||||||||||||||||||||
| GoaVoaClientIfGroupV3 | 1.3.6.1.4.1.8708.2.19.1.1.22 | ||||||||||||||||||||
group · current The voa client interface objects. (19.0)
| |||||||||||||||||||||
| GoaIfGroupV12 | 1.3.6.1.4.1.8708.2.19.1.1.23 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (20.0)
| |||||||||||||||||||||
| GoaModuleGroupV3 | 1.3.6.1.4.1.8708.2.19.1.1.24 | deprecated | |||||||||||||||||||
group · deprecated The module objects. (23.0)
| |||||||||||||||||||||
| GoaIfGroupV13 | 1.3.6.1.4.1.8708.2.19.1.1.25 | deprecated | |||||||||||||||||||
group · deprecated The oa interface objects. (23.0)
| |||||||||||||||||||||
| GoaIfGroupV14 | 1.3.6.1.4.1.8708.2.19.1.1.26 | ||||||||||||||||||||
group · current The oa interface objects. (24.0)
| |||||||||||||||||||||
| GoaIfGroupV15 | 1.3.6.1.4.1.8708.2.19.1.1.27 | ||||||||||||||||||||
group · current The oa interface objects. (27.0)
| |||||||||||||||||||||
| GoaModuleGroupV4 | 1.3.6.1.4.1.8708.2.19.1.1.28 | ||||||||||||||||||||
group · current The module objects. (28.0)
| |||||||||||||||||||||
| NlumOaCompl | 1.3.6.1.4.1.8708.2.19.1.2 | ||||||||||||||||||||
| MlumOaBasicComplV1 | 1.3.6.1.4.1.8708.2.19.1.2.1 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V1.
| |||||||||||||||||||||
| MlumOaBasicComplV2 | 1.3.6.1.4.1.8708.2.19.1.2.2 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V2.
| |||||||||||||||||||||
| MlumOaBasicComplV3 | 1.3.6.1.4.1.8708.2.19.1.2.3 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V3.
| |||||||||||||||||||||
| MlumOaBasicComplV4 | 1.3.6.1.4.1.8708.2.19.1.2.4 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V4 (3.1).
| |||||||||||||||||||||
| MlumOaBasicComplV5 | 1.3.6.1.4.1.8708.2.19.1.2.5 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V5 (3.2).
| |||||||||||||||||||||
| MlumOaBasicComplV6 | 1.3.6.1.4.1.8708.2.19.1.2.6 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V6 (4.0).
| |||||||||||||||||||||
| MlumOaBasicComplV7 | 1.3.6.1.4.1.8708.2.19.1.2.7 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V7 (5.0).
| |||||||||||||||||||||
| MlumOaBasicComplV8 | 1.3.6.1.4.1.8708.2.19.1.2.8 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V8 (6.0).
| |||||||||||||||||||||
| MlumOaBasicComplV9 | 1.3.6.1.4.1.8708.2.19.1.2.9 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V9 (10.0). | |||||||||||||||||||||
| MlumOaBasicComplV10 | 1.3.6.1.4.1.8708.2.19.1.2.10 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V10 (11.0). | |||||||||||||||||||||
| MlumOaBasicComplV11 | 1.3.6.1.4.1.8708.2.19.1.2.11 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V11 (12.0). | |||||||||||||||||||||
| MlumOaBasicComplV12 | 1.3.6.1.4.1.8708.2.19.1.2.12 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V12 (15.0). | |||||||||||||||||||||
| MlumOaBasicComplV13 | 1.3.6.1.4.1.8708.2.19.1.2.13 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V13 (17.0). | |||||||||||||||||||||
| MlumOaBasicComplV14 | 1.3.6.1.4.1.8708.2.19.1.2.14 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V14 (19.0). | |||||||||||||||||||||
| MlumOaBasicComplV15 | 1.3.6.1.4.1.8708.2.19.1.2.15 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V14 (20.0). | |||||||||||||||||||||
| MlumOaBasicComplV16 | 1.3.6.1.4.1.8708.2.19.1.2.16 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V16 (23.0). | |||||||||||||||||||||
| MlumOaBasicComplV17 | 1.3.6.1.4.1.8708.2.19.1.2.17 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V16 (24.0). | |||||||||||||||||||||
| MlumOaBasicComplV18 | 1.3.6.1.4.1.8708.2.19.1.2.18 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the OA MIB V16 (27.0). | |||||||||||||||||||||
| MlumOaBasicComplV19 | 1.3.6.1.4.1.8708.2.19.1.2.19 | ||||||||||||||||||||
compliance · current Basic implementation requirements for the OA MIB V17 (28.0). | |||||||||||||||||||||
| NlumOaMinimalGroups | 1.3.6.1.4.1.8708.2.19.1.3 | ||||||||||||||||||||
| NlumOaMinimalCompl | 1.3.6.1.4.1.8708.2.19.1.4 | ||||||||||||||||||||
| MlumOaMinimalComplV1 | 1.3.6.1.4.1.8708.2.19.1.4.1 | ||||||||||||||||||||
compliance · current Minimal implementation requirements for the OA MIB V1.
| |||||||||||||||||||||
| NlumOaMIBObjects | 1.3.6.1.4.1.8708.2.19.2 | ||||||||||||||||||||
| NoaGeneral | 1.3.6.1.4.1.8708.2.19.2.1 | ||||||||||||||||||||
| SoaGeneralLastChangeTime | 1.3.6.1.4.1.8708.2.19.2.1.1 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the MIB was last changed. | |||||||||||||||||||||
| SoaGeneralStateLastChangeTime | 1.3.6.1.4.1.8708.2.19.2.1.2 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the state of the MIB was last changed. | |||||||||||||||||||||
| SoaGeneralOaIfTableSize | 1.3.6.1.4.1.8708.2.19.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SoaGeneralVoaIfTableSize | 1.3.6.1.4.1.8708.2.19.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SoaGeneralVoaClientIfTableSize | 1.3.6.1.4.1.8708.2.19.2.1.5 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SoaGeneralVoaLineIfTableSize | 1.3.6.1.4.1.8708.2.19.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| SoaGeneralOaModuleTableSize | 1.3.6.1.4.1.8708.2.19.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of table | |||||||||||||||||||||
| NoaIfList | 1.3.6.1.4.1.8708.2.19.2.2 | ||||||||||||||||||||
| ToaIfTable | 1.3.6.1.4.1.8708.2.19.2.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RoaIfEntry | 1.3.6.1.4.1.8708.2.19.2.2.1.1 | NA | |||||||||||||||||||
| CoaIfIndex | 1.3.6.1.4.1.8708.2.19.2.2.1.1.1 | Unsigned32 (1..2147483647) | RO | 45 | |||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfName | 1.3.6.1.4.1.8708.2.19.2.2.1.1.2 | MgmtNameString | RO | oa:1:11:1-2 | |||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'oa:1:2:1-2', where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: oa:s:s:p - Optical amplifier interface Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfDescr | 1.3.6.1.4.1.8708.2.19.2.2.1.1.3 | DisplayString | RW | Pre-Amp von xy | |||||||||||||||||
column · DisplayString · read-write · current User configurable label. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfSubrack | 1.3.6.1.4.1.8708.2.19.2.2.1.1.4 | SubrackNumber | RC | 1 | |||||||||||||||||
column · SubrackNumber · read-create · current The number of the subrack where the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfSlot | 1.3.6.1.4.1.8708.2.19.2.2.1.1.5 | SlotNumber | RC | 11 | |||||||||||||||||
column · SlotNumber · read-create · current The number of the slot where the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfTxPort | 1.3.6.1.4.1.8708.2.19.2.2.1.1.6 | PortNumber | RC | 1 | |||||||||||||||||
column · PortNumber · read-create · current The number of the port where the TX-side of the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfRxPort | 1.3.6.1.4.1.8708.2.19.2.2.1.1.7 | PortNumber | RC | 2 | |||||||||||||||||
column · PortNumber · read-create · current The number of the port where the RX-side of the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfInvPhysIndexOrZero | 1.3.6.1.4.1.8708.2.19.2.2.1.1.8 | Unsigned32 (0..2147483647) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current The row in the invPhysTable for this interface. Set to 0 if not known. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfAdminStatus | 1.3.6.1.4.1.8708.2.19.2.2.1.1.9 | BoardOrInterfaceAdminStatus | RW | 3 | |||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. This attribute can be written via SNMP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfOperStatus | 1.3.6.1.4.1.8708.2.19.2.2.1.1.10 | BoardOrInterfaceOperStatus | RO | 3 | |||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventing it from going to the 'up'-state. up - The interface is operational. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserStatus | 1.3.6.1.4.1.8708.2.19.2.2.1.1.11 | INTEGER | RO | on(2) | |||||||||||||||||
column · INTEGER · read-only · current The operational state of the laser. off - The laser is turned off. on - The laser is turned on.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfAmplifierType | 1.3.6.1.4.1.8708.2.19.2.2.1.1.12 | INTEGER | RC | constantGainLI(9) | |||||||||||||||||
column · INTEGER · read-create · current The type of amplifier for this interface.
preAmp25GAd - pre-amplifier for 2.5 G,
add-drop
preAmp25GTm - pre-amplifier for 2.5 G,
terminal multiplexor
powAmp10G - power amplifier for 10 G
preAmp10GAd - pre-amplifier for 10 G,
add-drop
preAmp10GTm - pre-amplifier for 10 G,
terminal multiplexor
constantGain - used for pre-amps and other
point-to-point links. Uses ASE compensation.
=> specify wantedGain
constantGainLI - Default value. Works as constantGain
but uses low input power mode. Please,
refer to OA commissioning manual to decideoaIfRxSignalStatus
which gain mode that should be used.
constantGainHI - Works as constantGain but uses high
input power mode. Please, refer to OA
commissioning manual to decide which gain
mode that should be used.
constantSignalPower - used in combination
with 2 channel add-drop filters.
Uses ASE compensation.
=> specify wantedSignalPower
constantPower - For test purposes
No ASE compensation.
=> specify wantedAbsolutePower
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfWantedAbsolutePowerLevel | 1.3.6.1.4.1.8708.2.19.2.2.1.1.13 | Integer32 (0..195) | RW | 280 | |||||||||||||||||
column · Integer32 (0..195) · read-write · current For powAmp10G and constantPower, the user can give the wanted absolute power level in units of 0.1 dBm. For OA10 and OA17 in constantGain and constantSignalPower, this parameter shows the derived absolute power level. The value is calculated from the other given parameters. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfWantedRelativePowerLevel | 1.3.6.1.4.1.8708.2.19.2.2.1.1.14 | Integer32 (-60..60) | RW | 0 | |||||||||||||||||
column · Integer32 (-60..60) · read-write · current Wanted offset from production setting in units of 0.1 dBm. Applicable for preAmp25GAd and preAmp10GAd. Note that the output power level is dependent on the power of the input signal, so you might not always get the power that you want. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfWantedGain | 1.3.6.1.4.1.8708.2.19.2.2.1.1.15 | Integer32 (130..330) | RW | 280 | |||||||||||||||||
column · Integer32 (130..330) · read-write · current Signal gain setting in units of 0.1 dB. Applicable for preAmp25GTm, preAmp10GTm and constantGain/LI/HI. This attribute can be written via SNMP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfFrequencyMin | 1.3.6.1.4.1.8708.2.19.2.2.1.1.16 | LambdaFrequency | RW | 19210 | |||||||||||||||||
column · LambdaFrequency · read-write · current Lowest amplified freqency in hundreds of GHz (0.01 GHz). Supported range 19210 ... 19590 (c921 .. c959) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfFrequencyMax | 1.3.6.1.4.1.8708.2.19.2.2.1.1.17 | LambdaFrequency | RW | 19590 | |||||||||||||||||
column · LambdaFrequency · read-write · current Highest amplified freqency in hundreds of GHz (0.01 GHz). Supported range 19210 ... 19590 (c921 .. c959) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfNominalTxPower | 1.3.6.1.4.1.8708.2.19.2.2.1.1.18 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The production setting for output power in units of 0.1 dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfTxPowerLevel | 1.3.6.1.4.1.8708.2.19.2.2.1.1.19 | Integer32 | RO | 86 | |||||||||||||||||
column · Integer32 · read-only · current The transmitted power level in units of 0.1 dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfRxPowerLevel | 1.3.6.1.4.1.8708.2.19.2.2.1.1.20 | Integer32 | RO | -201 | |||||||||||||||||
column · Integer32 · read-only · current The received power level in units of 0.1 dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfRxPowerLevelLowThreshold | 1.3.6.1.4.1.8708.2.19.2.2.1.1.21 | Integer32 (-50..80) | RW | 30 | |||||||||||||||||
column · Integer32 (-50..80) · read-write · current The lower threshold for received power level relative to the loss of signal threshold, in units of 0.1 dB. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserBias | 1.3.6.1.4.1.8708.2.19.2.2.1.1.22 | Unsigned32 | RO | 1031 | |||||||||||||||||
column · Unsigned32 · read-only · current Measures laser bias current value in tenths of mA (0.1 mA). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfNominalLaserTemp | 1.3.6.1.4.1.8708.2.19.2.2.1.1.23 | Unsigned32 | RO | 250 | |||||||||||||||||
column · Unsigned32 · read-only · current The pre-set laser temperature (0.1 deg C) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfRelativeLaserTemp | 1.3.6.1.4.1.8708.2.19.2.2.1.1.24 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The current offset from the pre-set temperature in units of 0.1 degrees centigrade. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLossOfSignalThreshold | 1.3.6.1.4.1.8708.2.19.2.2.1.1.25 | Integer32 (-560..80) | RW | -400 | |||||||||||||||||
column · Integer32 (-560..80) · read-write · current The threshold for loss of signal. Note: Depending on the type of optical amplifier the value range may vary. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLossOfSignal | 1.3.6.1.4.1.8708.2.19.2.2.1.1.26 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfPumpLaserTempHigh | 1.3.6.1.4.1.8708.2.19.2.2.1.1.27 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Pump laser temperature too high. A(ctivation): Temperature exceedes threshold. D(e-activation): Temperature below threshold again. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfRegulationProblemRxPowerHigh | 1.3.6.1.4.1.8708.2.19.2.2.1.1.28 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The input power is above meassuring range. A: The received power level exceeds the associated threshold. D: The received power level is 0.5 dBm below the threshold. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfRegulationProblemTxPowerHigh | 1.3.6.1.4.1.8708.2.19.2.2.1.1.29 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The output power is above meassuring range. A: The received power level exceeds the associated threshold. D: The received power level is 0.5 dBm below the threshold. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfRegulationProblemTxPowerLow | 1.3.6.1.4.1.8708.2.19.2.2.1.1.30 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The output power is below meassuring range. A: The transmitted power level below the associated threshold. D: The transmitted power level is 0.5 dBm above the threshold. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfReceivedPowerLow | 1.3.6.1.4.1.8708.2.19.2.2.1.1.31 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Received power level low threshold exceeded. A: The received power level is below the associated threshold. D: The received power level is 0.5 dBm above the threshold. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserBiasHigh | 1.3.6.1.4.1.8708.2.19.2.2.1.1.32 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Laser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated threshold. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserTempControlFault | 1.3.6.1.4.1.8708.2.19.2.2.1.1.33 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The pump laser temperature exceeds the associated threshold. A: The temperature exceeds the value. D: The temperature is below the value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfHwMissing | 1.3.6.1.4.1.8708.2.19.2.2.1.1.34 | FaultStatus | RO | deprecated | |||||||||||||||||
column · FaultStatus · read-only · deprecated The HW for this i/f is not present A: Wrong HW is inserted in subrack. D: Correct HW is inserted in subrack. | |||||||||||||||||||||
| CoaIfConfigurationCommand | 1.3.6.1.4.1.8708.2.19.2.2.1.1.35 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select which amplifier type to use. All modes are not applicable
for all type of amplifier boards.
constantGain: Amplifier will set output power according to
the input power and the given gain
constantSignalPower: Amplifier will set a constant output power
with noise-compensation
constantPower: Amplifier will set a constant output power
independent of input power
constantGainLI: Amplifier will work with constant gain in the low
input power region (-35 to -5 dBm)
constantGainHI: Amplifier will work with constant gain in the
high input power region (-25 to +8 dBm)
pow10: Power amplifier for 10G
pre10ad: Pre-amplifier for 10G in add/drop config.
pre25ad: Pre-amplifier for 2.5G in add/drop config.
pre10tm: Pre-amplifier for 10G in TM configuration
pre25tm: Pre-amplifier for 2.5G in TM configuration | |||||||||||||||||||||
| CoaIfPumpLaserTempLow | 1.3.6.1.4.1.8708.2.19.2.2.1.1.36 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Pump laser temperature too low. A(ctivation): Temperature exceedes threshold. D(e-activation): Temperature above threshold again. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserTempLowRelativeThreshold | 1.3.6.1.4.1.8708.2.19.2.2.1.1.37 | Integer32 (-100..150) | RW | -30 | |||||||||||||||||
column · Integer32 (-100..150) · read-write · current Threshold for the Laser Temp Low alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserTempHighRelativeThreshold | 1.3.6.1.4.1.8708.2.19.2.2.1.1.38 | Integer32 (-250..450) | RW | 30 | |||||||||||||||||
column · Integer32 (-250..450) · read-write · current Threshold for the Laser Temp High alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfAmpTypeNotSupportedByHw | 1.3.6.1.4.1.8708.2.19.2.2.1.1.39 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The HW revision does not support the selected amplifier type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfWantedSignalPowerLevel | 1.3.6.1.4.1.8708.2.19.2.2.1.1.40 | Integer32 (-150..-50) | RW | -100 | |||||||||||||||||
column · Integer32 (-150..-50) · read-write · current Wanted offset from production setting in units of 0.1 dBm. Applicable for preAmp25GAd and preAmp10GAd. Note that the output power level is dependent on the power of the input signal, so you might not always get the power that you want. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfObjectProperty | 1.3.6.1.4.1.8708.2.19.2.2.1.1.41 | ObjectProperty | RO | 0 | |||||||||||||||||
column · ObjectProperty · read-only · current Property mask. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserForcedOn | 1.3.6.1.4.1.8708.2.19.2.2.1.1.42 | INTEGER | RW | disabled(1) | |||||||||||||||||
column · INTEGER · read-write · current When enabled, the laser control is on regardless of
whether there is an input signal present or not.
disabled - the laser control is activated first
after input signal is detected
enabled - the laser control is always on
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfActualLaserTemp | 1.3.6.1.4.1.8708.2.19.2.2.1.1.43 | Integer32 | RO | 250 | |||||||||||||||||
column · Integer32 · read-only · current The current laser temperature in units of 0.1 degrees centigrade. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfAutomaticPowerShutdown | 1.3.6.1.4.1.8708.2.19.2.2.1.1.44 | INTEGER | RW | disabled(1) | |||||||||||||||||
column · INTEGER · read-write · current When enabled, the laser is turned off if
the input signal to the other gain block
is lost.
disabled - the laser is NOT affected by
the other gain block.
enabled - the laser is turned off if
the input to the other gain block
is lost.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfDisabled | 1.3.6.1.4.1.8708.2.19.2.2.1.1.45 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The interface is disabled. A: Interface disabled. D: Interface enabled. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfWantedPowerLimit | 1.3.6.1.4.1.8708.2.19.2.2.1.1.46 | Integer32 (-70..195) | RW | 167 | |||||||||||||||||
column · Integer32 (-70..195) · read-write · current Applicable for constantGainLI/HI. Sets the maximum allowed output power. This attribute can be written via SNMP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfModuleInfo | 1.3.6.1.4.1.8708.2.19.2.2.1.1.47 | DisplayString | RO | FW:TRM_0.5.36.B20080917 / SN:371072480 | |||||||||||||||||
column · DisplayString · read-only · current Information (for example firmware and serial number) about the module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfMonitorInsertionLoss | 1.3.6.1.4.1.8708.2.19.2.2.1.1.48 | DisplayString | RO | 19.3 dB | |||||||||||||||||
column · DisplayString · read-only · current The insertion loss for the monitor port. When the real insertion loss is not possible to read from unit (older HW revsions), 20 (default) dB will be shown which is the normal value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfNumMonitorInsertionLoss | 1.3.6.1.4.1.8708.2.19.2.2.1.1.49 | Unsigned32 | RO | 193 | |||||||||||||||||
column · Unsigned32 · read-only · current This is the same parameter as Monitor Port Insertion Loss. The difference is that you will not see if the value can be read from the port or not (if not 20 dB will be shown). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfFunctionalType | 1.3.6.1.4.1.8708.2.19.2.2.1.1.50 | INTEGER | RW | preAmp(2) | |||||||||||||||||
column · INTEGER · read-write · current The functional type of amplifier. This attribute is ONLY used
by TNM and the traffic is not affected if changed.
undefined - default
preAmp - pre-amplifier. Receiving amplifier on a
terminal node.
offLinePreAmp - offline pre-amplifier. Receiving amplifier
in a non-terminal node. Offline pre-amplifier
amplifies dropped traffic, NOT line traffic.
lineAmp - line amplifier. Amplifier situated between
the terminal nodes, which amplifies passing
line traffic and (if applicable) added
traffic.
booster - booster. The transmitting amplifier from a
terminal node.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfActualGain | 1.3.6.1.4.1.8708.2.19.2.2.1.1.51 | Integer32 | RO | 280 | |||||||||||||||||
column · Integer32 · read-only · current Actual measured gain in units of 0.1 dB. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfSaturationFault | 1.3.6.1.4.1.8708.2.19.2.2.1.1.52 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Saturation alarm threshold is passed. Actual Gain < (Wanted Gain -1 dB). The alarm can be cleared be cleared by reducing the wanted gain attribute. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfWantedGainTilt | 1.3.6.1.4.1.8708.2.19.2.2.1.1.53 | Integer32 (-20..20) | RW | 0 | |||||||||||||||||
column · Integer32 (-20..20) · read-write · current Settable gain tilt for variable gain OA in units of 0.1 dB. Positive gain tilt is defined as gain increasing wavelength. Negative gain tilt is defined as gain decreasing wavelength. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfTxPowerLevelLowThreshold | 1.3.6.1.4.1.8708.2.19.2.2.1.1.54 | Integer32 (0..207) | RW | 5 | |||||||||||||||||
column · Integer32 (0..207) · read-write · current The lower threshold for transmitted power level transmits to the loss of signal threshold, in units of 0.1 dB. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserPumpBias | 1.3.6.1.4.1.8708.2.19.2.2.1.1.55 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current Measures laser pump bias current in per cent (%) of max value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfCaseTempOutOfrange | 1.3.6.1.4.1.8708.2.19.2.2.1.1.56 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The module has shutdown automatically because of too high case temp (>85 degC) or too low case temp (-40 degC). A(ctivation): Case temperature exceedes pre-set temp range. D(e-activation): Case temperature within pre-set temp range again. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfLaserTempOutOfRange | 1.3.6.1.4.1.8708.2.19.2.2.1.1.57 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current the module has shutdown automatically because of pump laser temp out of range (15-35 degC). A(ctivation): Laser temperature exceedes pre-set value. D(e-activation): Laser temperature below pre-set value again. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfSupportsReadMonitorInsertionLoss | 1.3.6.1.4.1.8708.2.19.2.2.1.1.58 | TruthValue | RO | 1 | |||||||||||||||||
column · TruthValue · read-only · current This value tells whether a OA interface has the ability to read the insertion loss value for the monitor port on an interface. true: Insertion loss can be read for this interface false: Insertion loss cannot be read for this interface Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfTxSignalStatus | 1.3.6.1.4.1.8708.2.19.2.2.1.1.59 | INTEGER | RO | up(3) | |||||||||||||||||
column · INTEGER · read-only · current The operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. up - The signal is OK. notApplicable (2147483647) - Attribute is not used on board.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfRxSignalStatus | 1.3.6.1.4.1.8708.2.19.2.2.1.1.60 | INTEGER | RO | up(3) | |||||||||||||||||
column · INTEGER · read-only · current The operational state for incoming (RX) signal of the interface. down - A major fault has occurred degraded - The signal quality is impaired. up - The signal is OK. notApplicable (2147483647) - Attribute is not used on board
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaIfOutputPowerFail | 1.3.6.1.4.1.8708.2.19.2.2.1.1.61 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Output power failed alarm threshold is passed. Actual Gain < (Wanted Gain -1 dB) and Output Power < (Power Limit -1 dB). Example values from LibreNMS test devices
| |||||||||||||||||||||
| NlumentisOaNotifications | 1.3.6.1.4.1.8708.2.19.2.3 | ||||||||||||||||||||
| NoaVoaIfList | 1.3.6.1.4.1.8708.2.19.2.4 | ||||||||||||||||||||
| ToaVoaIfTable | 1.3.6.1.4.1.8708.2.19.2.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RoaVoaIfEntry | 1.3.6.1.4.1.8708.2.19.2.4.1.1 | NA | |||||||||||||||||||
| CoaVoaIfIndex | 1.3.6.1.4.1.8708.2.19.2.4.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. | |||||||||||||||||||||
| CoaVoaIfName | 1.3.6.1.4.1.8708.2.19.2.4.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'voa:1:2:1'. | |||||||||||||||||||||
| CoaVoaIfDescr | 1.3.6.1.4.1.8708.2.19.2.4.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CoaVoaIfSubrack | 1.3.6.1.4.1.8708.2.19.2.4.1.1.4 | SubrackNumber | RO | ||||||||||||||||||
column · SubrackNumber · read-only · current The number of the subrack where the interface is located. | |||||||||||||||||||||
| CoaVoaIfSlot | 1.3.6.1.4.1.8708.2.19.2.4.1.1.5 | SlotNumber | RO | ||||||||||||||||||
column · SlotNumber · read-only · current The number of the slot where the interface is located. | |||||||||||||||||||||
| CoaVoaIfTxPort | 1.3.6.1.4.1.8708.2.19.2.4.1.1.6 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the port where the TX part of the interface is located. | |||||||||||||||||||||
| CoaVoaIfRxPort | 1.3.6.1.4.1.8708.2.19.2.4.1.1.7 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the port where the RX part of the interface is located. | |||||||||||||||||||||
| CoaVoaIfInvPhysIndexOrZero | 1.3.6.1.4.1.8708.2.19.2.4.1.1.8 | Unsigned32 (0..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current The row in the invPhysTable for this interface. Set to 0 if not known. | |||||||||||||||||||||
| CoaVoaIfAdminStatus | 1.3.6.1.4.1.8708.2.19.2.4.1.1.9 | BoardOrInterfaceAdminStatus | RW | ||||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. Note that there is no difference between 'up' and 'service', if no alarms can be rasied from this object. up - The interface should be activated when it becomes available. Alarms are not suppressed. This attribute can be written via SNMP. | |||||||||||||||||||||
| CoaVoaIfOperStatus | 1.3.6.1.4.1.8708.2.19.2.4.1.1.10 | BoardOrInterfaceOperStatus | RO | ||||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active. | |||||||||||||||||||||
| CoaVoaIfObjectProperty | 1.3.6.1.4.1.8708.2.19.2.4.1.1.11 | ObjectProperty | RO | ||||||||||||||||||
column · ObjectProperty · read-only · current Property mask. | |||||||||||||||||||||
| CoaVoaIfControlMode | 1.3.6.1.4.1.8708.2.19.2.4.1.1.12 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The control mode of the VOA channel.
constPower - regulate slowly towards a given
output power.
constAttenuation - set a fix attenuation
constPowerAtInstallation -
like constPower but allow faster changes
(this mode is not released)
| |||||||||||||||||||||
| CoaVoaIfWantedOutputPower | 1.3.6.1.4.1.8708.2.19.2.4.1.1.13 | Integer32 (-300..170) | RW | ||||||||||||||||||
column · Integer32 (-300..170) · read-write · current The wanted output power. Applicable for constPower. | |||||||||||||||||||||
| CoaVoaIfCurrentOutputPower | 1.3.6.1.4.1.8708.2.19.2.4.1.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The actual output power. | |||||||||||||||||||||
| CoaVoaIfRegulationRange | 1.3.6.1.4.1.8708.2.19.2.4.1.1.15 | Unsigned32 (0..200) | RW | ||||||||||||||||||
column · Unsigned32 (0..200) · read-write · current An offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the wanted output power, the regulation stops and the alarm is raised. Applicable for constPower. | |||||||||||||||||||||
| CoaVoaIfWantedAttenuation | 1.3.6.1.4.1.8708.2.19.2.4.1.1.16 | Unsigned32 (0..200) | RW | ||||||||||||||||||
column · Unsigned32 (0..200) · read-write · current The wanted attenuation. voa8ch: applicable for constAttenuation voa2ch: always applicable This attribute can be written via SNMP. | |||||||||||||||||||||
| CoaVoaIfCurrentAttenuation | 1.3.6.1.4.1.8708.2.19.2.4.1.1.17 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The current attenuation. Applicable for constPower. | |||||||||||||||||||||
| CoaVoaIfSamplePeriod | 1.3.6.1.4.1.8708.2.19.2.4.1.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The approximate period between 2 consecutive measurements of the output power | |||||||||||||||||||||
| CoaVoaIfOuputPowerControlFailure | 1.3.6.1.4.1.8708.2.19.2.4.1.1.19 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the wanted output power can not be obtained. That is, even if the attenuation is reduced to zero, the wanted power can not be obtained. | |||||||||||||||||||||
| CoaVoaIfCurrentPowerOutOfRange | 1.3.6.1.4.1.8708.2.19.2.4.1.1.20 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the current output power is outside the 'regulation range'. The regulation range is defined by Wanted Output Power +/- Regulation Range At this point, no regulation will be performed. The operator must change the wantedOutputPower. | |||||||||||||||||||||
| CoaVoaIfConfigurationCommand | 1.3.6.1.4.1.8708.2.19.2.4.1.1.21 | CommandString | RO | ||||||||||||||||||
column · CommandString · read-only · current Select which control mode to use: constPower constAttenuation | |||||||||||||||||||||
| CoaVoaIfInInstallationMode | 1.3.6.1.4.1.8708.2.19.2.4.1.1.22 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current Alarm raised when the VOA is put in the mode constPowerAtInstallation. | |||||||||||||||||||||
| NoaVoaClientIfList | 1.3.6.1.4.1.8708.2.19.2.5 | ||||||||||||||||||||
| ToaVoaClientIfTable | 1.3.6.1.4.1.8708.2.19.2.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RoaVoaClientIfEntry | 1.3.6.1.4.1.8708.2.19.2.5.1.1 | NA | |||||||||||||||||||
| CoaVoaClientIfIndex | 1.3.6.1.4.1.8708.2.19.2.5.1.1.1 | Unsigned32 (1..2147483647) | RO | 641 | |||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfName | 1.3.6.1.4.1.8708.2.19.2.5.1.1.2 | MgmtNameString | RO | client:1:8:1-2:919 | |||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'voaClient:1:2:1' which indicates subrack 1, board 2 and port 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfDescr | 1.3.6.1.4.1.8708.2.19.2.5.1.1.3 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current User configurable label. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfSubrack | 1.3.6.1.4.1.8708.2.19.2.5.1.1.4 | SubrackNumber | RO | 1 | |||||||||||||||||
column · SubrackNumber · read-only · current The number of the subrack where the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfSlot | 1.3.6.1.4.1.8708.2.19.2.5.1.1.5 | SlotNumber | RO | 8 | |||||||||||||||||
column · SlotNumber · read-only · current The number of the slot where the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfTxPort | 1.3.6.1.4.1.8708.2.19.2.5.1.1.6 | PortNumber | RO | 1 | |||||||||||||||||
column · PortNumber · read-only · current The number of the port where the Tx part of the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfRxPort | 1.3.6.1.4.1.8708.2.19.2.5.1.1.7 | PortNumber | RO | 2 | |||||||||||||||||
column · PortNumber · read-only · current The number of the port where the Rx part of the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfInvPhysIndexOrZero | 1.3.6.1.4.1.8708.2.19.2.5.1.1.8 | Unsigned32 (0..2147483647) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current The row in the invPhysTable for this interface. Set to 0 if not known. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfAdminStatus | 1.3.6.1.4.1.8708.2.19.2.5.1.1.9 | BoardOrInterfaceAdminStatus | RW | 1 | |||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfOperStatus | 1.3.6.1.4.1.8708.2.19.2.5.1.1.10 | BoardOrInterfaceOperStatus | RO | 2 | |||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfObjectProperty | 1.3.6.1.4.1.8708.2.19.2.5.1.1.11 | ObjectProperty | RO | 0 | |||||||||||||||||
column · ObjectProperty · read-only · current Property mask. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfControlMode | 1.3.6.1.4.1.8708.2.19.2.5.1.1.12 | INTEGER | RC | constAttenuation(1) | |||||||||||||||||
column · INTEGER · read-create · current The control mode of the VOA channel. constAttenuation - set a fix attenuation
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfWantedAttenuation | 1.3.6.1.4.1.8708.2.19.2.5.1.1.13 | Unsigned32 (0..200 | 2147483647) | RW | 200 | |||||||||||||||||
column · Unsigned32 (0..200 | 2147483647) · read-write · current The wanted attenuation. Applicable for constAttenuation This attribute can be written via SNMP if not set to 2147483647. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfCurrentAttenuation | 1.3.6.1.4.1.8708.2.19.2.5.1.1.14 | Unsigned32 | RO | 200 | |||||||||||||||||
column · Unsigned32 · read-only · current The current attenuation. Applicable in case of MDU40 boards. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfLambda | 1.3.6.1.4.1.8708.2.19.2.5.1.1.15 | LambdaFrequency | RO | 19190 | |||||||||||||||||
column · LambdaFrequency · read-only · current The frequency given in hundreds of GHz (0.01 GHz). Set to 0 for transparent ports. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfAbsoluteAttenuation | 1.3.6.1.4.1.8708.2.19.2.5.1.1.16 | Unsigned32 (0..300) | RW | 200 | |||||||||||||||||
column · Unsigned32 (0..300) · read-write · current The wanted absolute attenuation including the insertion loss. This value can never be set below the upper limit of the insertion loss. VOA8CHSFP: The range is dependent on the inserted VOA SFP. This attribute can be written via SNMP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfVoa2CurrentAttenuation | 1.3.6.1.4.1.8708.2.19.2.5.1.1.17 | Unsigned32 (0..300) | RO | 2147483648 | |||||||||||||||||
column · Unsigned32 (0..300) · read-only · current This value shows the current set absolute attenua- tion on VOA8ch-II and voa8chsfp. This value is usually the same value as the absolute attenuation except when a decrase or increase of attenuation is ongoing or when administrative status is set to down. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfDecreaseAttenuation | 1.3.6.1.4.1.8708.2.19.2.5.1.1.18 | Unsigned32 (0..300) | RW | 0 | |||||||||||||||||
column · Unsigned32 (0..300) · read-write · current The wanted decrease of the current attenuation. This attribute can be written via SNMP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfIncreaseAttenuation | 1.3.6.1.4.1.8708.2.19.2.5.1.1.19 | Unsigned32 (0..300) | RW | 0 | |||||||||||||||||
column · Unsigned32 (0..300) · read-write · current The wanted increase of the current attenuation. This attribute can be written via SNMP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfInsertionLoss | 1.3.6.1.4.1.8708.2.19.2.5.1.1.20 | Unsigned32 (0..200) | RO | 2147483648 | |||||||||||||||||
column · Unsigned32 (0..200) · read-only · current The insertion loss for the port. The attenuation can never be set to a value below this value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfExpectedFrequency | 1.3.6.1.4.1.8708.2.19.2.5.1.1.21 | LambdaFrequency | RW | 0 | |||||||||||||||||
column · LambdaFrequency · read-write · current The frequency given in hundreds of GHz (0.01 GHz). This value is only used for presentation purposes in name of port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfSfpMissing | 1.3.6.1.4.1.8708.2.19.2.5.1.1.22 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current An expected VOA SFP is missing. A(ctivation): An expected SFP is missing. D(e-activation): The missing SFP is inserted. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfSfpClass | 1.3.6.1.4.1.8708.2.19.2.5.1.1.23 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current String that contains general information about the SFP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfSfpTransmitterFailed | 1.3.6.1.4.1.8708.2.19.2.5.1.1.24 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The SFP has detected a failure in the transmitter part. A(ctivation): The transmitter has failed D(e-activation): The transmitter is OK again Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfSfpMediaMismatch | 1.3.6.1.4.1.8708.2.19.2.5.1.1.25 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The type of the inserted SFP is not the expected one. A(ctivation): Invalid or mismatching SFP media is detected. D(e-activation): The correct SFP is used. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfLossOfSignal | 1.3.6.1.4.1.8708.2.19.2.5.1.1.26 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current Loss of signal. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfSfpCodeMismatch | 1.3.6.1.4.1.8708.2.19.2.5.1.1.27 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The inserted SFP does not have a legal manufacturer code. A(ctivation): A SFP with illegal code is inserted. D(e-activation): The SFP with illegal code is removed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaClientIfAttenuationConfigMismatch | 1.3.6.1.4.1.8708.2.19.2.5.1.1.28 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The wanted attenuation is not supported by the inserted SFP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NoaVoaLineIfList | 1.3.6.1.4.1.8708.2.19.2.6 | ||||||||||||||||||||
| ToaVoaLineIfTable | 1.3.6.1.4.1.8708.2.19.2.6.1 | NA | |||||||||||||||||||
table · not-accessible · current The interface list. | |||||||||||||||||||||
| RoaVoaLineIfEntry | 1.3.6.1.4.1.8708.2.19.2.6.1.1 | NA | |||||||||||||||||||
| CoaVoaLineIfIndex | 1.3.6.1.4.1.8708.2.19.2.6.1.1.1 | Unsigned32 (1..2147483647) | RO | 593 | |||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfName | 1.3.6.1.4.1.8708.2.19.2.6.1.1.2 | MgmtNameString | RO | line:1:8:81-82 | |||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'VoaLine:1:2:1-2', where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: oaVoaLine:s:s:p - line interface Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfDescr | 1.3.6.1.4.1.8708.2.19.2.6.1.1.3 | DisplayString | RW | Richtung xy | |||||||||||||||||
column · DisplayString · read-write · current User configurable label. This attribute can be written via SNMP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfSubrack | 1.3.6.1.4.1.8708.2.19.2.6.1.1.4 | SubrackNumber | RC | 1 | |||||||||||||||||
column · SubrackNumber · read-create · current The number of the subrack where the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfSlot | 1.3.6.1.4.1.8708.2.19.2.6.1.1.5 | SlotNumber | RC | 8 | |||||||||||||||||
column · SlotNumber · read-create · current The number of the slot where the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfTxPort | 1.3.6.1.4.1.8708.2.19.2.6.1.1.6 | PortNumber | RC | 81 | |||||||||||||||||
column · PortNumber · read-create · current The number of the port where the TX-side of the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfRxPort | 1.3.6.1.4.1.8708.2.19.2.6.1.1.7 | PortNumber | RC | 82 | |||||||||||||||||
column · PortNumber · read-create · current The number of the port where the RX-side of the interface is located. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfInvPhysIndexOrZero | 1.3.6.1.4.1.8708.2.19.2.6.1.1.8 | Unsigned32 (0..2147483647) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current The row in the invPhysTable for this interface. Set to 0 if not known. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfAdminStatus | 1.3.6.1.4.1.8708.2.19.2.6.1.1.9 | BoardOrInterfaceAdminStatus | RW | 3 | |||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. up - The interface should be activated when it becomes available. Alarms are not suppressed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfOperStatus | 1.3.6.1.4.1.8708.2.19.2.6.1.1.10 | BoardOrInterfaceOperStatus | RO | 3 | |||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfModuleFailure | 1.3.6.1.4.1.8708.2.19.2.6.1.1.11 | FaultStatus | RO | 1 | |||||||||||||||||
column · FaultStatus · read-only · current The module HW has detected a failure. A: The module has failed D: The module is OK again Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoaVoaLineIfObjectProperty | 1.3.6.1.4.1.8708.2.19.2.6.1.1.12 | ObjectProperty | RO | 0 | |||||||||||||||||
column · ObjectProperty · read-only · current Property mask. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NoaModuleList | 1.3.6.1.4.1.8708.2.19.2.7 | ||||||||||||||||||||
| ToaModuleTable | 1.3.6.1.4.1.8708.2.19.2.7.1 | NA | |||||||||||||||||||
table · not-accessible · current The module list. | |||||||||||||||||||||
| RoaModuleEntry | 1.3.6.1.4.1.8708.2.19.2.7.1.1 | NA | |||||||||||||||||||
| CoaModuleIndex | 1.3.6.1.4.1.8708.2.19.2.7.1.1.1 | Unsigned32 (1..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (1..2147483647) · read-only · current An arbitrary index assigned to each entry. | |||||||||||||||||||||
| CoaModuleName | 1.3.6.1.4.1.8708.2.19.2.7.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'module:1:2:1'. | |||||||||||||||||||||
| CoaModuleDescr | 1.3.6.1.4.1.8708.2.19.2.7.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User configurable label. | |||||||||||||||||||||
| CoaModuleSubrack | 1.3.6.1.4.1.8708.2.19.2.7.1.1.4 | SubrackNumber | RO | ||||||||||||||||||
column · SubrackNumber · read-only · current The number of the subrack where the module is located. | |||||||||||||||||||||
| CoaModuleSlot | 1.3.6.1.4.1.8708.2.19.2.7.1.1.5 | SlotNumber | RO | ||||||||||||||||||
column · SlotNumber · read-only · current The number of the slot where the module is located. | |||||||||||||||||||||
| CoaModuleNumber | 1.3.6.1.4.1.8708.2.19.2.7.1.1.6 | PortNumber | RO | ||||||||||||||||||
column · PortNumber · read-only · current The number of the module on the board. | |||||||||||||||||||||
| CoaModuleInvPhysIndexOrZero | 1.3.6.1.4.1.8708.2.19.2.7.1.1.7 | Unsigned32 (0..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current The row in the invPhysTable for this interface. Set to 0 if not known. | |||||||||||||||||||||
| CoaModuleAdminStatus | 1.3.6.1.4.1.8708.2.19.2.7.1.1.8 | BoardOrInterfaceAdminStatus | RW | ||||||||||||||||||
column · BoardOrInterfaceAdminStatus · read-write · current The administrative state for the module. up - Alarms are not suppressed. service - Alarms from the module are suppressed. The module is still activated. down - Currently not used. | |||||||||||||||||||||
| CoaModuleOperStatus | 1.3.6.1.4.1.8708.2.19.2.7.1.1.9 | BoardOrInterfaceOperStatus | RO | ||||||||||||||||||
column · BoardOrInterfaceOperStatus · read-only · current The operational state for the module. notPresent - The module is not available. down - The module is not used. up - The module is active. | |||||||||||||||||||||
| CoaModuleObjectProperty | 1.3.6.1.4.1.8708.2.19.2.7.1.1.10 | ObjectProperty | RO | ||||||||||||||||||
column · ObjectProperty · read-only · current Property mask. | |||||||||||||||||||||
| CoaModuleNominalTemp | 1.3.6.1.4.1.8708.2.19.2.7.1.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The set temperature in units of 0.1 degrees centigrade. | |||||||||||||||||||||
| CoaModuleRelativeTemp | 1.3.6.1.4.1.8708.2.19.2.7.1.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The relative temperature in units of 0.1 degrees centigrade. | |||||||||||||||||||||
| CoaModuleTempFailure | 1.3.6.1.4.1.8708.2.19.2.7.1.1.13 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The module temperature is above/below expected one. A: The temperature is not correct. D: The temperature becomes correct. | |||||||||||||||||||||
| CoaModuleTemperature | 1.3.6.1.4.1.8708.2.19.2.7.1.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the module in 0.1 degrees centigrade | |||||||||||||||||||||
| CoaModuleCommunicationFailure | 1.3.6.1.4.1.8708.2.19.2.7.1.1.15 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The communication with the module failed. A(ctivation): Failed to talk to the module D(e-activation): Could talk to the module again | |||||||||||||||||||||
| CoaModuleModuleInfo | 1.3.6.1.4.1.8708.2.19.2.7.1.1.16 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Information (for example firmware and serial number) about the module. | |||||||||||||||||||||
| CoaModuleVcomThresholdExceeded | 1.3.6.1.4.1.8708.2.19.2.7.1.1.17 | FaultStatus | RO | deprecated | |||||||||||||||||
column · FaultStatus · read-only · deprecated The common voltage supply in the ROADM module has exceeded recommended threshold. Firmware upgrade is recommended to resolve this alarm. A(ctivation): The VCOM threshold is exceeded D(e-activation): The VCOM threshold is OK again | |||||||||||||||||||||
| CoaModuleFirmwareUpgradeAvailable | 1.3.6.1.4.1.8708.2.19.2.7.1.1.18 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current An upgrade is available for the ROADM module. See release notes for details on how to obtain and install the upgrade | |||||||||||||||||||||
| CoaModuleWarmingUp | 1.3.6.1.4.1.8708.2.19.2.7.1.1.19 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current ROADM module is warming up, the optics has not reached a stable temperature, all channels are blocked. A(ctivation): cold start of ROADM board D(e-activation): the warning is cleared as soon as the module has reached a stable temperature, this takes 3-8 minutes | |||||||||||||||||||||
| CoaModuleFailure | 1.3.6.1.4.1.8708.2.19.2.7.1.1.20 | FaultStatus | RO | ||||||||||||||||||
column · FaultStatus · read-only · current The module HW has detected a failure. A(ctivation): The module has failed D(e-activation): The module is OK again | |||||||||||||||||||||
Groups and compliance
- lumOaBasicComplV1
- lumOaBasicComplV10
- lumOaBasicComplV11
- lumOaBasicComplV12
- lumOaBasicComplV13
- lumOaBasicComplV14
- lumOaBasicComplV15
- lumOaBasicComplV16
- lumOaBasicComplV17
- lumOaBasicComplV18
- lumOaBasicComplV19
- lumOaBasicComplV2
- lumOaBasicComplV3
- lumOaBasicComplV4
- lumOaBasicComplV5
- lumOaBasicComplV6
- lumOaBasicComplV7
- lumOaBasicComplV8
- lumOaBasicComplV9
- lumOaMinimalComplV1
- oaGeneralGroup
- oaGeneralGroupV2
- oaGeneralGroupV3
- oaGeneralGroupV4
- oaIfGroup
- oaIfGroupV10
- oaIfGroupV11
- oaIfGroupV12
- oaIfGroupV13
- oaIfGroupV14
- oaIfGroupV15
- oaIfGroupV2
- oaIfGroupV3
- oaIfGroupV4
- oaIfGroupV5
- oaIfGroupV6
- oaIfGroupV7
- oaIfGroupV8
- oaIfGroupV9
- oaModuleGroupV1
- oaModuleGroupV2
- oaModuleGroupV3
- oaModuleGroupV4
- oaVoaClientIfGroupV1
- oaVoaClientIfGroupV2
- oaVoaClientIfGroupV3
- oaVoaIfGroupV1
- oaVoaLineIfGroupV1