LUM-IFOTNMON-MIB
Nokia (formerly 'Lumentis AB')The MIB module for management of OTN monitor objects (SM, TCM, PM
and trace objects).
This module describes the SM, TCM and PM in ITU-T Recommendation
G.709.
The references refers to the following:
G.709/Y.1331 (03/2003)
G.798 (06/2004)
G.806 (03/2006)
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps
and tables sizes.
(2) The sm group contains information and configuration for the SM
section objects.
(3) The tandem connection monitoring (tcm) group contains information
and configuration for the Tcm layer objects.
(4) The path monitoring (pm) group contains information and configu-
ration for the Pm layer objects.
(5) The trace group contains information and configuration for the
trace objects defined in G.709.snmptranslate -m LUM-IFOTNMON-MIB -Tpsnmpwalk -v2c -c <community> -m LUM-IFOTNMON-MIB <host> 1.3.6.1.4.1.8708.1.1.55Imports
| LUM-REG | lumIfOtnMonMIB, lumModules |
|---|---|
| LUM-TC | DisplayStringWithNA, EnabledDisabledWithNA, FaultStatusWithNA, MgmtNameString, OtnAlarmMode, OtnDirectionWithNA, OtnTIMDetModeWithNA, OtnTypeWithNA, SignalStatusWithNA, TcmMode, TcmNumber, TruthValueWithNA, Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IlumIfOtnMonMIBModule | 1.3.6.1.4.1.8708.1.1.55 | ||||||||||||
identity The MIB module for management of OTN monitor objects (SM, TCM, PM
and trace objects).
This module describes the SM, TCM and PM in ITU-T Recommendation
G.709.
The references refers to the following:
G.709/Y.1331 (03/2003)
G.798 (06/2004)
G.806 (03/2006)
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps
and tables sizes.
(2) The sm group contains information and configuration for the SM
section objects.
(3) The tandem connection monitoring (tcm) group contains information
and configuration for the Tcm layer objects.
(4) The path monitoring (pm) group contains information and configu-
ration for the Pm layer objects.
(5) The trace group contains information and configuration for the
trace objects defined in G.709. | |||||||||||||
| NlumIfOtnMonConfs | 1.3.6.1.4.1.8708.2.55.1 | ||||||||||||
| NlumIfOtnMonGroups | 1.3.6.1.4.1.8708.2.55.1.1 | ||||||||||||
| GifOtnMonGeneralGroupV1 | 1.3.6.1.4.1.8708.2.55.1.1.1 | ||||||||||||
group · current The general objects.
| |||||||||||||
| GifOtnMonSmGroupV1 | 1.3.6.1.4.1.8708.2.55.1.1.2 | ||||||||||||
group · current The ifOtnMon sm objects (R20.0). | |||||||||||||
| GifOtnMonTcmGroupV1 | 1.3.6.1.4.1.8708.2.55.1.1.3 | deprecated | |||||||||||
group · deprecated The ifOtnMon tcm objects (R20.0).
| |||||||||||||
| GifOtnMonPmGroupV1 | 1.3.6.1.4.1.8708.2.55.1.1.4 | deprecated | |||||||||||
group · deprecated The ifOtnMon pm objects (R20.0). | |||||||||||||
| GifOtnMonTraceGroupV1 | 1.3.6.1.4.1.8708.2.55.1.1.5 | deprecated | |||||||||||
group · deprecated The ifOtnMon trace objects (R20.0).
| |||||||||||||
| GifOtnMonPmGroupV2 | 1.3.6.1.4.1.8708.2.55.1.1.6 | deprecated | |||||||||||
group · deprecated The ifOtnMon pm objects (R22.0).
| |||||||||||||
| GifOtnMonTcmGroupV2 | 1.3.6.1.4.1.8708.2.55.1.1.7 | ||||||||||||
group · current The ifOtnMon tcm objects (R23.0).
| |||||||||||||
| GifOtnMonTraceGroupV2 | 1.3.6.1.4.1.8708.2.55.1.1.8 | deprecated | |||||||||||
group · deprecated The ifOtnMon trace objects (R23.0).
| |||||||||||||
| GifOtnMonTraceGroupV3 | 1.3.6.1.4.1.8708.2.55.1.1.9 | deprecated | |||||||||||
group · deprecated The ifOtnMon trace objects (R25.0).
| |||||||||||||
| GifOtnMonPmGroupV3 | 1.3.6.1.4.1.8708.2.55.1.1.10 | ||||||||||||
group · current The ifOtnMon pm objects (R28.0).
| |||||||||||||
| GifOtnMonTraceGroupV4 | 1.3.6.1.4.1.8708.2.55.1.1.11 | ||||||||||||
group · current The ifOtnMon trace objects (R28.0).
| |||||||||||||
| NlumIfOtnMonCompl | 1.3.6.1.4.1.8708.2.55.1.2 | ||||||||||||
| MlumIfOtnMonComplV1 | 1.3.6.1.4.1.8708.2.55.1.2.1 | deprecated | |||||||||||
compliance · deprecated Basic implementation requirements for the ifOtnMon MIB. (R20.0) | |||||||||||||
| MlumIfOtnMonComplV2 | 1.3.6.1.4.1.8708.2.55.1.2.2 | deprecated | |||||||||||
compliance · deprecated Basic implementation requirements for the ifOtnMon MIB. (R22.0) | |||||||||||||
| MlumIfOtnMonComplV3 | 1.3.6.1.4.1.8708.2.55.1.2.3 | deprecated | |||||||||||
compliance · deprecated Basic implementation requirements for the ifOtnMon MIB. (R23.0) | |||||||||||||
| MlumIfOtnMonComplV4 | 1.3.6.1.4.1.8708.2.55.1.2.4 | deprecated | |||||||||||
compliance · deprecated Basic implementation requirements for the ifOtnMon MIB. (R25.0) | |||||||||||||
| MlumIfOtnMonComplV5 | 1.3.6.1.4.1.8708.2.55.1.2.5 | ||||||||||||
compliance · current Basic implementation requirements for the ifOtnMon MIB. (R28.0) | |||||||||||||
| NlumIfOtnMonMIBObjects | 1.3.6.1.4.1.8708.2.55.2 | ||||||||||||
| NifOtnMonGeneral | 1.3.6.1.4.1.8708.2.55.2.1 | ||||||||||||
| SifOtnMonGeneralConfigLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.1 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the MIB was last changed. | |||||||||||||
| SifOtnMonGeneralStateLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.2 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the state of the MIB was last changed. | |||||||||||||
| SifOtnMonGeneralIfOtnMonSmTableSize | 1.3.6.1.4.1.8708.2.55.2.1.3 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Size of SM table. | |||||||||||||
| SifOtnMonGeneralIfOtnMonSmConfigLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.4 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the table was last changed. | |||||||||||||
| SifOtnMonGeneralIfOtnMonSmStateLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.5 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the state and/or configuration of the table was last changed. | |||||||||||||
| SifOtnMonGeneralIfOtnMonTcmTableSize | 1.3.6.1.4.1.8708.2.55.2.1.6 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Size of otn tcm table | |||||||||||||
| SifOtnMonGeneralIfOtnMonTcmConfigLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.7 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the table was last changed. | |||||||||||||
| SifOtnMonGeneralIfOtnMonTcmStateLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.8 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the state and/or configuration of the table was last changed. | |||||||||||||
| SifOtnMonGeneralIfOtnMonPmTableSize | 1.3.6.1.4.1.8708.2.55.2.1.9 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Size of otn pm table | |||||||||||||
| SifOtnMonGeneralIfOtnMonPmConfigLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.10 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the table was last changed. | |||||||||||||
| SifOtnMonGeneralIfOtnMonPmStateLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.11 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the state and/or configuration of the table was last changed. | |||||||||||||
| SifOtnMonGeneralIfOtnMonTraceTableSize | 1.3.6.1.4.1.8708.2.55.2.1.12 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Size of otn trace table | |||||||||||||
| SifOtnMonGeneralIfOtnMonTraceConfigLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.13 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the table was last changed. | |||||||||||||
| SifOtnMonGeneralIfOtnMonTraceStateLastChangeTime | 1.3.6.1.4.1.8708.2.55.2.1.14 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time when the state and/or configuration of the table was last changed. | |||||||||||||
| NifOtnMonSmList | 1.3.6.1.4.1.8708.2.55.2.2 | ||||||||||||
| TifOtnMonSmTable | 1.3.6.1.4.1.8708.2.55.2.2.1 | NA | |||||||||||
table · not-accessible · current The SM group contains information and configuration for the SM section objects. | |||||||||||||
| RifOtnMonSmEntry | 1.3.6.1.4.1.8708.2.55.2.2.1.1 | NA | |||||||||||
| CifOtnMonSmIndex | 1.3.6.1.4.1.8708.2.55.2.2.1.1.1 | Unsigned32 | RO | 149 | |||||||||
column · Unsigned32 · read-only · current An index assigned to each entry. Example values from LibreNMS test devices
| |||||||||||||
| CifOtnMonSmName | 1.3.6.1.4.1.8708.2.55.2.2.1.1.2 | MgmtNameString | RO | lineSm:1:2:21-22 | |||||||||
column · MgmtNameString · read-only · current The management name of the otn otu, for example 'otu:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. Example values from LibreNMS test devices
| |||||||||||||
| CifOtnMonSmConnIfBasicIfIndex | 1.3.6.1.4.1.8708.2.55.2.2.1.1.3 | Unsigned32WithNA | RO | 149 | |||||||||
column · Unsigned32WithNA · read-only · current An index that describes to which index in ifBasicIf table this object is related. Example values from LibreNMS test devices
| |||||||||||||
| CifOtnMonSmTxSignalStatus | 1.3.6.1.4.1.8708.2.55.2.2.1.1.4 | SignalStatusWithNA | RO | 3 | |||||||||
column · SignalStatusWithNA · read-only · current The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. Example values from LibreNMS test devices
| |||||||||||||
| CifOtnMonSmRxSignalStatus | 1.3.6.1.4.1.8708.2.55.2.2.1.1.5 | SignalStatusWithNA | RO | 3 | |||||||||
column · SignalStatusWithNA · read-only · current The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. Example values from LibreNMS test devices
| |||||||||||||
| CifOtnMonSmBackwardDefectIndication | 1.3.6.1.4.1.8708.2.55.2.2.1.1.6 | FaultStatusWithNA | RO | 1 | |||||||||
column · FaultStatusWithNA · read-only · current Backward defect indication (BDI). Indicates if backward defect indication (BDI) alarm exists or not. Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798 alarm: Backward defect indication (in wrapper) active. ok: Backward defect indication (in wrapper) inactive. Example values from LibreNMS test devices
| |||||||||||||
| CifOtnMonSmIncomingAlignmentError | 1.3.6.1.4.1.8708.2.55.2.2.1.1.7 | FaultStatusWithNA | RO | 1 | |||||||||
column · FaultStatusWithNA · read-only · current Incoming alignment error (IAE). Indicates an incoming frame alignment error. Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798 A: Incoming frame alignment error (IAE) is active. D: IAE is inactive. Example values from LibreNMS test devices
| |||||||||||||
| CifOtnMonSmBackwardIncomingAlignmentError | 1.3.6.1.4.1.8708.2.55.2.2.1.1.8 | FaultStatusWithNA | RO | 1 | |||||||||
column · FaultStatusWithNA · read-only · current Backward incoming alignment error (BIAE). Indicates a backward incoming alignment error. Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798 A: Backward incoming alignment error (BIAE) is active. D: BIAE is inactive. Example values from LibreNMS test devices
| |||||||||||||
| NifOtnMonTcmList | 1.3.6.1.4.1.8708.2.55.2.3 | ||||||||||||
| TifOtnMonTcmTable | 1.3.6.1.4.1.8708.2.55.2.3.1 | NA | |||||||||||
table · not-accessible · current The tandem connection monitoring (tcm) group contains information and configuration for the Tcm layer objects. | |||||||||||||
| RifOtnMonTcmEntry | 1.3.6.1.4.1.8708.2.55.2.3.1.1 | NA | |||||||||||
| CifOtnMonTcmIndex | 1.3.6.1.4.1.8708.2.55.2.3.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current An index assigned to each entry. | |||||||||||||
| CifOtnMonTcmName | 1.3.6.1.4.1.8708.2.55.2.3.1.1.2 | MgmtNameString | RO | ||||||||||
column · MgmtNameString · read-only · current The management name of the otn tcm, for example 'tcm:1:2:1-2:1', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. The last number tells which TCM in the ODU header it is. | |||||||||||||
| CifOtnMonTcmConnOduIndex | 1.3.6.1.4.1.8708.2.55.2.3.1.1.3 | Unsigned32WithNA | RO | ||||||||||
column · Unsigned32WithNA · read-only · current An index that describes to which index in ifOtnMonOdu table this object is related. | |||||||||||||
| CifOtnMonTcmAlarmMode | 1.3.6.1.4.1.8708.2.55.2.3.1.1.4 | OtnAlarmMode | RO | ||||||||||
column · OtnAlarmMode · read-only · current Tells how section specific alarms are handled.
ignore - Do not show fault status nor alarms for
non-operational sections.
display - Show fault status, but do not generate
alarms for non-operational sections.
alarm - Show fault status and generate alarms also
for non-operational sections. | |||||||||||||
| CifOtnMonTcmMode | 1.3.6.1.4.1.8708.2.55.2.3.1.1.5 | TcmMode | RO | ||||||||||
column · TcmMode · read-only · current TCM mode sets the mode of the TCM according to 14.5 in
G.798 (06/2004).
operational - The TCM overhead is operational.
transparent - The TCM overhead is transparent.
monitor - If TCM overhead is transparent but
consequent actions will be executed
in sink adaption. | |||||||||||||
| CifOtnMonTcmTcmNumber | 1.3.6.1.4.1.8708.2.55.2.3.1.1.6 | TcmNumber | RO | ||||||||||
column · TcmNumber · read-only · current TCM number in ODU overhead. Can be tcm1 .. tcm6. | |||||||||||||
| CifOtnMonTcmTxSignalStatus | 1.3.6.1.4.1.8708.2.55.2.3.1.1.7 | SignalStatusWithNA | RO | ||||||||||
column · SignalStatusWithNA · read-only · current The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. | |||||||||||||
| CifOtnMonTcmRxSignalStatus | 1.3.6.1.4.1.8708.2.55.2.3.1.1.8 | SignalStatusWithNA | RO | ||||||||||
column · SignalStatusWithNA · read-only · current The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. | |||||||||||||
| CifOtnMonTcmBackwardDefectIndication | 1.3.6.1.4.1.8708.2.55.2.3.1.1.9 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Rx Backward defect indication (BDI). Indicates if backward defect indication (BDI) alarm exists or not. Reference: 15.8.2.2.3 G.709, 2.6.6.1 G.798 alarm: Backward defect indication (in wrapper) active. ok: Backward defect indication (in wrapper) inactive. | |||||||||||||
| CifOtnMonTcmBackwardIncomingAlignmentError | 1.3.6.1.4.1.8708.2.55.2.3.1.1.10 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Backward incoming alignment error (BIAE). Indicates a backward incoming alignment error. A: Backward incoming alignment error (BIAE) is active. D: BIAE is inactive. | |||||||||||||
| CifOtnMonTcmRxAlarmIndicationSignal | 1.3.6.1.4.1.8708.2.55.2.3.1.1.11 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Rx Alarm indication signal (AIS). Indicates if alarm indication signal (AIS) alarm exists or not in receiving direction. Reference: 16.5.1 G.709, 15.8.2.1.5 G.709, 6.2.6.3.2 G.798 alarm: An AIS in OTU signal is detected. ok: AIS inactive. | |||||||||||||
| CifOtnMonTcmRxOpenConnectionIndication | 1.3.6.1.4.1.8708.2.55.2.3.1.1.12 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Rx Open connection indication (OCI). Indicates if an open connection indication (OCI) alarm exists or not in receiving direction. Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798 alarm: An 'open connection' in OTU signal is detected. ok: OCI inactive. | |||||||||||||
| CifOtnMonTcmRxLockedDefectIndication | 1.3.6.1.4.1.8708.2.55.2.3.1.1.13 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Rx Locked defect indication (LCK). Indicates if locked defect indication alarm exists or not. Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798 alarm: Locked defect indication active. ok: Locked defect indication inactive. | |||||||||||||
| CifOtnMonTcmLossOfTandemConnection | 1.3.6.1.4.1.8708.2.55.2.3.1.1.14 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Loss of tandem connection (LTC). No operational tandem connection is found in other end. Reference: 6.2.1.4 in G.798 alarm: No other operational TCM is found. ok: An operation TCM is found. | |||||||||||||
| CifOtnMonTcmIncomingAlignmentError | 1.3.6.1.4.1.8708.2.55.2.3.1.1.15 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Incoming alignment error (IAE). Indicates an incoming frame alignment error when TCM is in use. A: Incoming frame alignment error (IAE) is active. D: IAE is inactive. Reference: 14 in G.798 | |||||||||||||
| CifOtnMonTcmSwitchCriteria | 1.3.6.1.4.1.8708.2.55.2.3.1.1.16 | EnabledDisabledWithNA | RO | ||||||||||
column · EnabledDisabledWithNA · read-only · current TCM switch criteria set current TCM as protection switch criteria. disable - The TCM is not set as switch criteria. enable - The TCM is set as switch criteria. | |||||||||||||
| NifOtnMonPmList | 1.3.6.1.4.1.8708.2.55.2.4 | ||||||||||||
| TifOtnMonPmTable | 1.3.6.1.4.1.8708.2.55.2.4.1 | NA | |||||||||||
table · not-accessible · current The path monitoring (pm) group contains information and configu- ration for the Pm layer objects. | |||||||||||||
| RifOtnMonPmEntry | 1.3.6.1.4.1.8708.2.55.2.4.1.1 | NA | |||||||||||
| CifOtnMonPmIndex | 1.3.6.1.4.1.8708.2.55.2.4.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current An index assigned to each entry. | |||||||||||||
| CifOtnMonPmName | 1.3.6.1.4.1.8708.2.55.2.4.1.1.2 | MgmtNameString | RO | ||||||||||
column · MgmtNameString · read-only · current The management name of the otn pm, for example 'pm:1:2:1-2:1',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers. The
last number tells in which of the ODU the PM is located. | |||||||||||||
| CifOtnMonPmConnOduIndex | 1.3.6.1.4.1.8708.2.55.2.4.1.1.4 | Unsigned32WithNA | RO | ||||||||||
column · Unsigned32WithNA · read-only · current An index that describes to which index in ifOtnMonOdu table this object is related. | |||||||||||||
| CifOtnMonPmAlarmMode | 1.3.6.1.4.1.8708.2.55.2.4.1.1.5 | OtnAlarmMode | RO | ||||||||||
column · OtnAlarmMode · read-only · current Tells how section specific alarms are handled. ignore - Do not show fault status nor alarms for non-operational sections. display - Show fault status, but do not generate alarms for non-operational sections. alarm - Show fault status and generate alarms also for non-operational sections. | |||||||||||||
| CifOtnMonPmTxSignalStatus | 1.3.6.1.4.1.8708.2.55.2.4.1.1.6 | SignalStatusWithNA | RO | ||||||||||
column · SignalStatusWithNA · read-only · current The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. | |||||||||||||
| CifOtnMonPmRxSignalStatus | 1.3.6.1.4.1.8708.2.55.2.4.1.1.7 | SignalStatusWithNA | RO | ||||||||||
column · SignalStatusWithNA · read-only · current The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. | |||||||||||||
| CifOtnMonPmRxBackwardDefectIndication | 1.3.6.1.4.1.8708.2.55.2.4.1.1.8 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Rx Backward defect indication (BDI),
Monitored overhead: ODUk-PM-BDI
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the BDI is sent towards
the board-internal G.805 Matrix.
Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798
Values:
alarm: The ODUk-PM-BDI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-BDI overhead is declared as inactive according to
the G.798 processing rules | |||||||||||||
| CifOtnMonPmRxAlarmIndicationSignal | 1.3.6.1.4.1.8708.2.55.2.4.1.1.9 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Rx Alarm indication signal (AIS),
Monitored overhead: ODUk-PM-AIS
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the AIS is sent towards
the board-internal G.805 Matrix.
Reference: 16.5.1 G.709, 15.8.2.2.5 G.709, 6.2.3.2 G.798
Values:
alarm: The ODUk-PM-AIS overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-AIS overhead is declared as inactive according to
the G.798 processing rules | |||||||||||||
| CifOtnMonPmRxOpenConnectionIndication | 1.3.6.1.4.1.8708.2.55.2.4.1.1.10 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Rx Open connection indication (OCI).
Monitored overhead: ODUk-PM-OCI
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the OCI is sent towards
the board-internal G.805 Matrix.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
Values:
alarm: The ODUk-PM-OCI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-OCI overhead is declared as inactive according to
the G.798 processing rules | |||||||||||||
| CifOtnMonPmRxLockedDefectIndication | 1.3.6.1.4.1.8708.2.55.2.4.1.1.11 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Rx Locked defect indication (LCK).
Monitored overhead: ODUk-PM-LCK
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the LCK is sent towards
the board-internal G.805 Matrix.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
Values:
alarm: The ODUk-PM-LCK overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-LCK overhead is declared as inactive according to
the G.798 processing rules | |||||||||||||
| CifOtnMonPmTxBackwardDefectIndication | 1.3.6.1.4.1.8708.2.55.2.4.1.1.12 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Tx Backward defect indication (BDI).
Monitored overhead: ODUk-PM-BDI
Direction: Received from the board-internal G.805 Matrix and,
if applicable, sent towards the physical interface.
Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798
Values:
alarm: The ODUk-PM-BDI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-BDI overhead is declared as inactive according to
the G.798 processing rules | |||||||||||||
| CifOtnMonPmTxAlarmIndicationSignal | 1.3.6.1.4.1.8708.2.55.2.4.1.1.13 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Tx Alarm indication signal (AIS).
Monitored overhead: ODUk-PM-AIS
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 16.5.1 G.709, 15.8.2.2.5 G.709, 6.2.3.2 G.798
Values:
alarm: The ODUk-PM-AIS overhead is declared as active according
to the G.798 processing rules
ok: The ODUk-PM-AIS overhead is declared as inactive according
to the G.798 processing rules | |||||||||||||
| CifOtnMonPmTxOpenConnectionIndication | 1.3.6.1.4.1.8708.2.55.2.4.1.1.14 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Tx Open connection indication (OCI).
Monitored overhead: ODUk-PM-AIS
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
Values:
alarm: The ODUk-PM-OCI overhead is declared as active
according to the G.798 processing rules
ok: The ODUk-PM-OCI overhead is declared as inactive
according to the G.798 processing rules | |||||||||||||
| CifOtnMonPmTxLockedDefectIndication | 1.3.6.1.4.1.8708.2.55.2.4.1.1.15 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Tx Locked Defect Indication (LCK).
Monitored overhead: ODUk-PM-LCK
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
Values:
alarm: The ODUk-PM-LCK overhead is declared as active
according to the G.798 processing rules
ok: The ODUk-PM-LCK overhead is declared as inactive
according to the G.798 processing rules | |||||||||||||
| CifOtnMonPmUpPortId | 1.3.6.1.4.1.8708.2.55.2.4.1.1.16 | Integer32 (-1..2147483647) | RO | ||||||||||
column · Integer32 (-1..2147483647) · read-only · current Internal port reference for traffic unit. | |||||||||||||
| NifOtnMonTraceList | 1.3.6.1.4.1.8708.2.55.2.5 | ||||||||||||
| TifOtnMonTraceTable | 1.3.6.1.4.1.8708.2.55.2.5.1 | NA | |||||||||||
table · not-accessible · current The trace group contains information and configuration for the trace objects defined in G.709. | |||||||||||||
| RifOtnMonTraceEntry | 1.3.6.1.4.1.8708.2.55.2.5.1.1 | NA | |||||||||||
| CifOtnMonTraceIndex | 1.3.6.1.4.1.8708.2.55.2.5.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current An index assigned to each entry. | |||||||||||||
| CifOtnMonTraceName | 1.3.6.1.4.1.8708.2.55.2.5.1.1.2 | MgmtNameString | RC | ||||||||||
column · MgmtNameString · read-create · current The management name of the OTN trace, for example 'clientSmTrace:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. | |||||||||||||
| CifOtnMonTraceConnOtnType | 1.3.6.1.4.1.8708.2.55.2.5.1.1.3 | OtnTypeWithNA | RO | ||||||||||
column · OtnTypeWithNA · read-only · current What type of monitoring object the trace is related to. sm - Section monitoring (SM). pm - Path monitoring (PM). tcm1 - Tandem connection monitoring (TCM) tcm2 - Tandem connection monitoring (TCM) tcm3 - Tandem connection monitoring (TCM) tcm4 - Tandem connection monitoring (TCM) tcm5 - Tandem connection monitoring (TCM) tcm6 - Tandem connection monitoring (TCM) | |||||||||||||
| CifOtnMonTraceConnOtnIndex | 1.3.6.1.4.1.8708.2.55.2.5.1.1.4 | Unsigned32WithNA | RO | ||||||||||
column · Unsigned32WithNA · read-only · current An index that describes to which index in SM, TCM or PM table this object is related. | |||||||||||||
| CifOtnMonTraceSapiTraceTransmitted | 1.3.6.1.4.1.8708.2.55.2.5.1.1.5 | DisplayStringWithNA (SIZE (0..15)) | RW | ||||||||||
column · DisplayStringWithNA (SIZE (0..15)) · read-write · current The Source Access Point Identifier to be transmitted from this interface. Note, it is only possible to enter 15 characters since the first character is added automatically according to standard. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that this attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceSapiTraceReceivedByte0 | 1.3.6.1.4.1.8708.2.55.2.5.1.1.6 | Unsigned32WithNA | RO | deprecated | |||||||||
column · Unsigned32WithNA · read-only · deprecated The received Source Access Point Identifier for this interface. The value 255 is used by SNMP agent to show that the attribute is not valid in current configuration. The value 254 is used by SNMP agent to show that the attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceSapiTraceReceived | 1.3.6.1.4.1.8708.2.55.2.5.1.1.7 | DisplayStringWithNA (SIZE (0..15)) | RO | ||||||||||
column · DisplayStringWithNA (SIZE (0..15)) · read-only · current The received Source Access Point Identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that this attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceSapiTraceExpected | 1.3.6.1.4.1.8708.2.55.2.5.1.1.8 | DisplayStringWithNA (SIZE (0..15)) | RW | ||||||||||
column · DisplayStringWithNA (SIZE (0..15)) · read-write · current SAPI used for matching against the received SAPI. Note, it is only possible to enter 15 characters since first character is added automatically according to standard. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that this attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceDapiTraceTransmitted | 1.3.6.1.4.1.8708.2.55.2.5.1.1.9 | DisplayStringWithNA (SIZE (0..15)) | RW | ||||||||||
column · DisplayStringWithNA (SIZE (0..15)) · read-write · current The Destination Access Point Identifier to be transmitted from this interface. Note, it is only possible to enter 15 characters since first character is added automatically according to standard. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that this attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceDapiTraceReceivedByte0 | 1.3.6.1.4.1.8708.2.55.2.5.1.1.10 | Unsigned32WithNA | RO | deprecated | |||||||||
column · Unsigned32WithNA · read-only · deprecated The received Destination Access Point Identifier for this interface. The value 255 is used by SNMP agent to show that the attribute is not valid in current configuration. The value 254 is used by SNMP agent to show that the attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceDapiTraceReceived | 1.3.6.1.4.1.8708.2.55.2.5.1.1.11 | DisplayStringWithNA (SIZE (0..15)) | RO | ||||||||||
column · DisplayStringWithNA (SIZE (0..15)) · read-only · current The received Destination Access Point Identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that this attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceDapiTraceExpected | 1.3.6.1.4.1.8708.2.55.2.5.1.1.12 | DisplayStringWithNA (SIZE (0..15)) | RW | ||||||||||
column · DisplayStringWithNA (SIZE (0..15)) · read-write · current DAPI used for matching against the received DAPI. Note, it is only possible to enter 15 characters since the first character is added automatically according to standard. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that this attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceOpSpecificTraceTransmitted | 1.3.6.1.4.1.8708.2.55.2.5.1.1.13 | DisplayStringWithNA (SIZE (0..32)) | RW | ||||||||||
column · DisplayStringWithNA (SIZE (0..32)) · read-write · current The operator specific trace identifier to be transmitted from this interface. Set to empty string for default value. <IP address>:<subrack>:<slot>:<port> Note that only the last part of the address is used. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that this attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceOpSpecificTraceReceived | 1.3.6.1.4.1.8708.2.55.2.5.1.1.14 | DisplayStringWithNA (SIZE (0..32)) | RO | ||||||||||
column · DisplayStringWithNA (SIZE (0..32)) · read-only · current The received operator specific trace identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that this attribute is not possible to read at the moment. | |||||||||||||
| CifOtnMonTraceTraceIdMMDetectionMode | 1.3.6.1.4.1.8708.2.55.2.5.1.1.15 | OtnTIMDetModeWithNA | RW | ||||||||||
column · OtnTIMDetModeWithNA · read-write · current The method to detect a trace identifier mismatch value. off - Mismatch will be ignored on all levels sapi - Mismatch is based on mismatch in expected and received SAPI trace dapi - Mismatch is based on mismatch in expected and received DAPI trace both - Mismatch is based on both SAPI and DAPI traces. | |||||||||||||
| CifOtnMonTraceTraceAlarmMode | 1.3.6.1.4.1.8708.2.55.2.5.1.1.16 | EnabledDisabledWithNA | RO | deprecated | |||||||||
column · EnabledDisabledWithNA · read-only · deprecated Controls if the trace identifier mismatch alarm should be raised. If trace alarm mode is enabled and if object is set in terminating or monitor mode, BDI is sent in backward direction if received trace and expected trace differs. disabled - The alarm is disabled. enabled - The alarm is raised if expected trace identifier differs from the received trace identifier. | |||||||||||||
| CifOtnMonTraceTIMConsequenceActionsDisabled | 1.3.6.1.4.1.8708.2.55.2.5.1.1.17 | TruthValueWithNA | RO | ||||||||||
column · TruthValueWithNA · read-only · current Controls if the trace identifier mismatch should give rise to any consequent actions in the downstream direction. Consequent actions for the upstream direction are always enabled regardless of this value. true - No consequent actions due to trace identifier mis- match alarm. false - Consequent actions enabled. Reference: 9, 13 and 14 in G.798 | |||||||||||||
| CifOtnMonTraceTxSignalStatus | 1.3.6.1.4.1.8708.2.55.2.5.1.1.18 | SignalStatusWithNA | RO | ||||||||||
column · SignalStatusWithNA · read-only · current The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. | |||||||||||||
| CifOtnMonTraceRxSignalStatus | 1.3.6.1.4.1.8708.2.55.2.5.1.1.19 | SignalStatusWithNA | RO | ||||||||||
column · SignalStatusWithNA · read-only · current The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. | |||||||||||||
| CifOtnMonTraceTraceMismatch | 1.3.6.1.4.1.8708.2.55.2.5.1.1.20 | FaultStatusWithNA | RO | ||||||||||
column · FaultStatusWithNA · read-only · current Trace identifier mismatch (TIM). Indicates if the expected SM/PM/TCM trace identifier (SAPI and/or DAPI) differs from the received trace identifier. Reference: 15.8.2.2.1 G.709 alarm: The received trace identifier differs from the expected trace identifier. ok: The identifiers match. | |||||||||||||
| CifOtnMonTraceConnOtnDirection | 1.3.6.1.4.1.8708.2.55.2.5.1.1.21 | OtnDirectionWithNA | RO | ||||||||||
column · OtnDirectionWithNA · read-only · current Direction of the trail trace identifier object
on the interface.
none - Direction is unambiguous.
rx - Received from the board-internal G.805 Matrix and,
if applicable, sent towards the physical interface.
tx - Received from the physical interface and, if applicable,
sent towards the board-internal G.805 Matrix. | |||||||||||||
| CifOtnMonTraceUpPortId | 1.3.6.1.4.1.8708.2.55.2.5.1.1.22 | Integer32 (-1..2147483647) | RO | ||||||||||
column · Integer32 (-1..2147483647) · read-only · current Internal port reference for traffic unit. | |||||||||||||