LUM-IFBASIC-MIB
Nokia (formerly 'Lumentis AB')The MIB module for management of basic port objects.
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps
and tables sizes.
(2) The If group contains information about the name of the port that
is used in GUI.
(2) The Admin group contains information and configuration for all
interfaces available for If Basic Admin objects.
(3) The Signal group contains information and configuration for all
interfaces available for If Basic Signal objects.snmptranslate -m LUM-IFBASIC-MIB -Tpsnmpwalk -v2c -c <community> -m LUM-IFBASIC-MIB <host> 1.3.6.1.4.1.8708.1.1.46Imports
| LUM-REG | lumIfBasicMIB, lumModules |
|---|---|
| LUM-TC | AdminStatusWithNA, AutoAlarmStatus, CommandString, ConnectorType, DisplayStringWithNA, EnabledDisabledWithNA, FaultStatusWithNA, InterfaceStatus, InterfaceType, Layer, MgmtNameString, OperStatusWithNA, OpticalLayerMappingType, PhysicalLayerMappingType, ResetWithNA, SignalDirection, SignalFormat, SignalStatusWithNA, Time7200min, Time7200minNo0, TribPortIdType, TruthValueWithNA, Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IlumIfBasicMIBModule | 1.3.6.1.4.1.8708.1.1.46 | ||||||||||||||||||||
identity The MIB module for management of basic port objects.
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps
and tables sizes.
(2) The If group contains information about the name of the port that
is used in GUI.
(2) The Admin group contains information and configuration for all
interfaces available for If Basic Admin objects.
(3) The Signal group contains information and configuration for all
interfaces available for If Basic Signal objects. | |||||||||||||||||||||
| NlumIfBasicConfs | 1.3.6.1.4.1.8708.2.46.1 | ||||||||||||||||||||
| NlumIfBasicGroups | 1.3.6.1.4.1.8708.2.46.1.1 | ||||||||||||||||||||
| GifBasicGeneralGroupV1 | 1.3.6.1.4.1.8708.2.46.1.1.1 | ||||||||||||||||||||
group · current The general objects.
| |||||||||||||||||||||
| GifBasicIfGroupV1 | 1.3.6.1.4.1.8708.2.46.1.1.2 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic if objects (R20.0). | |||||||||||||||||||||
| GifBasicAdminGroupV1 | 1.3.6.1.4.1.8708.2.46.1.1.3 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic admin objects (R20.0). | |||||||||||||||||||||
| GifBasicSignalGroupV1 | 1.3.6.1.4.1.8708.2.46.1.1.4 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic signal objects (R20.0).
| |||||||||||||||||||||
| GifBasicSignalGroupV2 | 1.3.6.1.4.1.8708.2.46.1.1.5 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic signal objects (R22.0).
| |||||||||||||||||||||
| GifBasicSignalGroupV3 | 1.3.6.1.4.1.8708.2.46.1.1.6 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic signal objects (R23.0).
| |||||||||||||||||||||
| GifBasicSignalGroupV4 | 1.3.6.1.4.1.8708.2.46.1.1.7 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic signal objects (R26.0).
| |||||||||||||||||||||
| GifBasicIfGroupV2 | 1.3.6.1.4.1.8708.2.46.1.1.8 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic if objects (R26.0). | |||||||||||||||||||||
| GifBasicSignalGroupV5 | 1.3.6.1.4.1.8708.2.46.1.1.9 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic signal objects (R26.1).
| |||||||||||||||||||||
| GifBasicSignalGroupV6 | 1.3.6.1.4.1.8708.2.46.1.1.10 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic signal objects (R28.0).
| |||||||||||||||||||||
| GifBasicAdminGroupV2 | 1.3.6.1.4.1.8708.2.46.1.1.11 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic admin objects (R28.0). | |||||||||||||||||||||
| GifBasicIfGroupV3 | 1.3.6.1.4.1.8708.2.46.1.1.12 | ||||||||||||||||||||
group · current The ifBasic if objects (R28.0). | |||||||||||||||||||||
| GifBasicAdminGroupV3 | 1.3.6.1.4.1.8708.2.46.1.1.13 | deprecated | |||||||||||||||||||
group · deprecated The ifBasic admin objects (R31.0).
| |||||||||||||||||||||
| GifBasicSignalGroupV7 | 1.3.6.1.4.1.8708.2.46.1.1.14 | ||||||||||||||||||||
group · current The ifBasic signal objects (R31.0).
| |||||||||||||||||||||
| GifBasicAdminGroupV4 | 1.3.6.1.4.1.8708.2.46.1.1.15 | ||||||||||||||||||||
group · current The ifBasic admin objects (R32.0).
| |||||||||||||||||||||
| NlumIfBasicCompl | 1.3.6.1.4.1.8708.2.46.1.2 | ||||||||||||||||||||
| MlumIfBasicBasicComplV1 | 1.3.6.1.4.1.8708.2.46.1.2.1 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the ifBasic MIB. (R20.0) | |||||||||||||||||||||
| MlumIfBasicBasicComplV2 | 1.3.6.1.4.1.8708.2.46.1.2.2 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the ifBasic MIB. (R22.0) | |||||||||||||||||||||
| MlumIfBasicBasicComplV3 | 1.3.6.1.4.1.8708.2.46.1.2.3 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the ifBasic MIB. (R23.0) | |||||||||||||||||||||
| MlumIfBasicBasicComplV4 | 1.3.6.1.4.1.8708.2.46.1.2.4 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the ifBasic MIB. (R26.0) | |||||||||||||||||||||
| MlumIfBasicBasicComplV5 | 1.3.6.1.4.1.8708.2.46.1.2.5 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the ifBasic MIB. (R26.1) | |||||||||||||||||||||
| MlumIfBasicBasicComplV6 | 1.3.6.1.4.1.8708.2.46.1.2.6 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the ifBasic MIB. (R28.0) | |||||||||||||||||||||
| MlumIfBasicBasicComplV7 | 1.3.6.1.4.1.8708.2.46.1.2.7 | deprecated | |||||||||||||||||||
compliance · deprecated Basic implementation requirements for the ifBasic MIB. (R31.0) | |||||||||||||||||||||
| MlumIfBasicBasicComplV8 | 1.3.6.1.4.1.8708.2.46.1.2.8 | ||||||||||||||||||||
compliance · current Basic implementation requirements for the ifBasic MIB. (R32.0) | |||||||||||||||||||||
| NlumIfBasicMIBObjects | 1.3.6.1.4.1.8708.2.46.2 | ||||||||||||||||||||
| NifBasicGeneral | 1.3.6.1.4.1.8708.2.46.2.1 | ||||||||||||||||||||
| SifBasicGeneralConfigLastChangeTime | 1.3.6.1.4.1.8708.2.46.2.1.1 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the MIB was last changed. | |||||||||||||||||||||
| SifBasicGeneralStateLastChangeTime | 1.3.6.1.4.1.8708.2.46.2.1.2 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the state of the MIB was last changed. | |||||||||||||||||||||
| SifBasicGeneralIfBasicIfTableSize | 1.3.6.1.4.1.8708.2.46.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of if table | |||||||||||||||||||||
| SifBasicGeneralIfBasicIfConfigLastChangeTime | 1.3.6.1.4.1.8708.2.46.2.1.4 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the table was last changed. | |||||||||||||||||||||
| SifBasicGeneralIfBasicIfStateLastChangeTime | 1.3.6.1.4.1.8708.2.46.2.1.5 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the state and/or configuration of the table was last changed. | |||||||||||||||||||||
| SifBasicGeneralIfBasicAdminTableSize | 1.3.6.1.4.1.8708.2.46.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of admin table | |||||||||||||||||||||
| SifBasicGeneralIfBasicAdminConfigLastChangeTime | 1.3.6.1.4.1.8708.2.46.2.1.7 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the table was last changed. | |||||||||||||||||||||
| SifBasicGeneralIfBasicAdminStateLastChangeTime | 1.3.6.1.4.1.8708.2.46.2.1.8 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the state and/or configuration of the table was last changed. | |||||||||||||||||||||
| SifBasicGeneralIfBasicSignalTableSize | 1.3.6.1.4.1.8708.2.46.2.1.9 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Size of signal table | |||||||||||||||||||||
| SifBasicGeneralIfBasicSignalConfigLastChangeTime | 1.3.6.1.4.1.8708.2.46.2.1.10 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the configuration of the table was last changed. | |||||||||||||||||||||
| SifBasicGeneralIfBasicSignalStateLastChangeTime | 1.3.6.1.4.1.8708.2.46.2.1.11 | DateAndTime | RO | ||||||||||||||||||
scalar · DateAndTime · read-only · current The time when the state and/or configuration of the table was last changed. | |||||||||||||||||||||
| NifBasicIfList | 1.3.6.1.4.1.8708.2.46.2.2 | ||||||||||||||||||||
| TifBasicIfTable | 1.3.6.1.4.1.8708.2.46.2.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The if basic if interface list. | |||||||||||||||||||||
| RifBasicIfEntry | 1.3.6.1.4.1.8708.2.46.2.2.1.1 | NA | |||||||||||||||||||
| CifBasicIfIndex | 1.3.6.1.4.1.8708.2.46.2.2.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current An index assigned to each entry. | |||||||||||||||||||||
| CifBasicIfName | 1.3.6.1.4.1.8708.2.46.2.2.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'client:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. | |||||||||||||||||||||
| CifBasicIfTxSignalStatus | 1.3.6.1.4.1.8708.2.46.2.2.1.1.3 | SignalStatusWithNA | RO | ||||||||||||||||||
column · SignalStatusWithNA · read-only · current The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. | |||||||||||||||||||||
| CifBasicIfRxSignalStatus | 1.3.6.1.4.1.8708.2.46.2.2.1.1.4 | SignalStatusWithNA | RO | ||||||||||||||||||
column · SignalStatusWithNA · read-only · current The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. | |||||||||||||||||||||
| CifBasicIfUpId | 1.3.6.1.4.1.8708.2.46.2.2.1.1.5 | Unsigned32 (0..2147483647) | RO | ||||||||||||||||||
column · Unsigned32 (0..2147483647) · read-only · current Identity in the UP for the interface. The upId is used internally between CU and TU to define a certain interface in the TU. | |||||||||||||||||||||
| CifBasicIfAid | 1.3.6.1.4.1.8708.2.46.2.2.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The access identifier (AID) of the interface. The format is according to GR-833. | |||||||||||||||||||||
| CifBasicIfPhysicalLocation | 1.3.6.1.4.1.8708.2.46.2.2.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The physical location of the if. The format is according to GR-833. | |||||||||||||||||||||
| NifBasicAdminList | 1.3.6.1.4.1.8708.2.46.2.3 | ||||||||||||||||||||
| TifBasicAdminTable | 1.3.6.1.4.1.8708.2.46.2.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The if basic admin interface list. | |||||||||||||||||||||
| RifBasicAdminEntry | 1.3.6.1.4.1.8708.2.46.2.3.1.1 | NA | |||||||||||||||||||
| CifBasicAdminIndex | 1.3.6.1.4.1.8708.2.46.2.3.1.1.1 | Unsigned32 | RO | 129 | |||||||||||||||||
column · Unsigned32 · read-only · current An index assigned to each entry. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminName | 1.3.6.1.4.1.8708.2.46.2.3.1.1.2 | MgmtNameString | RO | clientAdmin:1:2:1-2 | |||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'admin:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminDescr | 1.3.6.1.4.1.8708.2.46.2.3.1.1.3 | DisplayStringWithNA | RW | | |||||||||||||||||
column · DisplayStringWithNA · read-write · current User configurable label. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminSubrack | 1.3.6.1.4.1.8708.2.46.2.3.1.1.4 | Unsigned32WithNA | RC | 1 | |||||||||||||||||
column · Unsigned32WithNA · read-create · current The subrack of the physical port that this interface is bound to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminSlot | 1.3.6.1.4.1.8708.2.46.2.3.1.1.5 | Unsigned32WithNA | RC | 2 | |||||||||||||||||
column · Unsigned32WithNA · read-create · current The slot of the physical port that this interface is bound to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminTxPort | 1.3.6.1.4.1.8708.2.46.2.3.1.1.6 | Unsigned32WithNA | RC | 1 | |||||||||||||||||
column · Unsigned32WithNA · read-create · current The transmitting physical port that this interface is bound to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminRxPort | 1.3.6.1.4.1.8708.2.46.2.3.1.1.7 | Unsigned32WithNA | RC | 2 | |||||||||||||||||
column · Unsigned32WithNA · read-create · current The receiving physical port that this interface is bound to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminAdminStatus | 1.3.6.1.4.1.8708.2.46.2.3.1.1.8 | AdminStatusWithNA | RW | 1 | |||||||||||||||||
column · AdminStatusWithNA · read-write · current The administrative state of the ifBasic interface. down - The interface is de-activated. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. Note that there is no difference between 'up' and 'service', if no alarms can be raised from this object. up - The interface will be activated when available. Alarms are not suppressed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminOperStatus | 1.3.6.1.4.1.8708.2.46.2.3.1.1.9 | OperStatusWithNA | RO | 2 | |||||||||||||||||
column · OperStatusWithNA · read-only · current The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing its transition to the 'up' state. up - The interface is active. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminAutoAlarmEnableStatus | 1.3.6.1.4.1.8708.2.46.2.3.1.1.10 | AutoAlarmStatus | RO | 3 | |||||||||||||||||
column · AutoAlarmStatus · read-only · current The state of auto alarm enable for the interface.
suppressTrxAndSignal - Both signal alarms and trx alarms are suppressed
suppressSignal - Only signal alarms are suppressed
suppressNone - Neither trx nor signal alarms
are suppressedExample values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminAutoAlarmEnableReset | 1.3.6.1.4.1.8708.2.46.2.3.1.1.11 | ResetWithNA | RO | 2 | |||||||||||||||||
column · ResetWithNA · read-only · current When the attribute is set to reset the auto-alarm enable function is re-initialised. Then the attribute is set to normal again automatically. reset - Re-initialises the auto-alarm enable function normal - The auto-alarm enable function is in normal state Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifBasicAdminInterfaceStatus | 1.3.6.1.4.1.8708.2.46.2.3.1.1.12 | InterfaceStatus | RO | ||||||||||||||||||
column · InterfaceStatus · read-only · current The status of the traffic interface. outOfService - No PM and no alarms. autoInService - No PM and no alarms. Changes to 'inService' when OK. inService - Reports PM and alarms. maintenance - Maintenance mode. | |||||||||||||||||||||
| CifBasicAdminIfNo | 1.3.6.1.4.1.8708.2.46.2.3.1.1.13 | Unsigned32WithNA | RC | ||||||||||||||||||
column · Unsigned32WithNA · read-create · current The physical interface number of the actual multi-connector port. | |||||||||||||||||||||
| CifBasicAdminIfType | 1.3.6.1.4.1.8708.2.46.2.3.1.1.14 | InterfaceType | RC | ||||||||||||||||||
column · InterfaceType · read-create · current Type of interface (Individual or bundled). | |||||||||||||||||||||
| CifBasicAdminNotAvailableForUse | 1.3.6.1.4.1.8708.2.46.2.3.1.1.15 | TruthValueWithNA | RO | ||||||||||||||||||
column · TruthValueWithNA · read-only · current Is the interface not available for use. The interface may be created in order to show some physical properties but may otherwise be unavailable for service depending on setup and available resources. | |||||||||||||||||||||
| NifBasicSignalList | 1.3.6.1.4.1.8708.2.46.2.4 | ||||||||||||||||||||
| TifBasicSignalTable | 1.3.6.1.4.1.8708.2.46.2.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The if basic signal interface list. | |||||||||||||||||||||
| RifBasicSignalEntry | 1.3.6.1.4.1.8708.2.46.2.4.1.1 | NA | |||||||||||||||||||
| CifBasicSignalIndex | 1.3.6.1.4.1.8708.2.46.2.4.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current An index assigned to each entry. | |||||||||||||||||||||
| CifBasicSignalName | 1.3.6.1.4.1.8708.2.46.2.4.1.1.2 | MgmtNameString | RO | ||||||||||||||||||
column · MgmtNameString · read-only · current The management name of the interface, for example 'signal:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. | |||||||||||||||||||||
| CifBasicSignalSignalStructure | 1.3.6.1.4.1.8708.2.46.2.4.1.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The signal structure used. Bitfield 64 bit wide. For internal use. Bit 0 tells if mib ifBasicPhysicalTrx is loaded, bit 1 ifBasicOpticalTranssection, etc according to list below. Add new items last. ifPhysicalTrx ifOpticalTranssection ifOpticalChannel ifOpticalDigitalSignalRate ifEthPhysical ifEthMac ifOtnOdu ifOtnOtu ifOtnOpu ifOtnMonSm ifOtnMonPm ifOtnMonTcm ifOtnMonTrace ifSdhRs ifSdhMs ifSonetSection ifSonetLine ifPerfFec ifPerfAdmin ifPerfG826 ifPerfL2Error ifPerfL1 ifPerfL0 ifOpticalFec ifFcPhysical ifOtnTp ifOpticalTransportLaneCarrier ifOpticalTransportLaneCarrierGroup ifPerfL2Stat ifIwdmRs ifIwdmMS ifAmplifierAmplifier ifAmplifierModule ifAmplifierRaman ifAmplifierEdfa ifIwdmPath ifFhCpri ifFhObsai ifPhysicalCage ifEthRsFec ifPerfDelay ifOtdr | |||||||||||||||||||||
| CifBasicSignalSignalFormat | 1.3.6.1.4.1.8708.2.46.2.4.1.1.4 | SignalFormat | RW | ||||||||||||||||||
column · SignalFormat · read-write · current The signal format. | |||||||||||||||||||||
| CifBasicSignalFarEndLoopbackTerminatingLayer | 1.3.6.1.4.1.8708.2.46.2.4.1.1.5 | Layer | RO | ||||||||||||||||||
column · Layer · read-only · current The layer where the far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) is done. This is coded in a bitmask | |||||||||||||||||||||
| CifBasicSignalFarEndLoopback | 1.3.6.1.4.1.8708.2.46.2.4.1.1.6 | EnabledDisabledWithNA | RW | ||||||||||||||||||
column · EnabledDisabledWithNA · read-write · current The far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) setting. disabled - Far end loopback is not set. This is the default setting. enabled - Far end loopback is set. | |||||||||||||||||||||
| CifBasicSignalFarEndLoopbackTimeout | 1.3.6.1.4.1.8708.2.46.2.4.1.1.7 | Time7200min | RW | ||||||||||||||||||
column · Time7200min · read-write · current Timeout for far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interfac) to make sure connection to node is not lost if ppp link is broken. The unit is minutes. The value 0 is used in SNMP to indicate that the setting will last forever. Note! This attribute is not saved in backup, meaning the loopback will be set to disabled when rebooting CU. | |||||||||||||||||||||
| CifBasicSignalNearEndLoopbackTerminatingLayer | 1.3.6.1.4.1.8708.2.46.2.4.1.1.8 | Layer | RO | ||||||||||||||||||
column · Layer · read-only · current The layer where the near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) is done. This is coded in a bitmask. | |||||||||||||||||||||
| CifBasicSignalNearEndLoopback | 1.3.6.1.4.1.8708.2.46.2.4.1.1.9 | EnabledDisabledWithNA | RW | ||||||||||||||||||
column · EnabledDisabledWithNA · read-write · current The near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) setting. disabled - Near end loopback is not set. This is the default setting. enabled - Near end loopback is set. | |||||||||||||||||||||
| CifBasicSignalNearEndLoopbackTimeout | 1.3.6.1.4.1.8708.2.46.2.4.1.1.10 | Time7200min | RW | ||||||||||||||||||
column · Time7200min · read-write · current Timeout for near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) to make sure connection to node is not lost if ppp link is broken. The unit is minutes. The value 0 is used in SNMP to indicate that the setting will last forever. Note! This attribute is not saved in backup, meaning the loopback will be set to disabled when rebooting CU. | |||||||||||||||||||||
| CifBasicSignalFarEndLoopbackEnabled | 1.3.6.1.4.1.8708.2.46.2.4.1.1.11 | FaultStatusWithNA | RO | ||||||||||||||||||
column · FaultStatusWithNA · read-only · current Far end end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) is enabled. alarm: Far end loopback is enabled. ok: Far end loopback is disabled. | |||||||||||||||||||||
| CifBasicSignalNearEndLoopbackEnabled | 1.3.6.1.4.1.8708.2.46.2.4.1.1.12 | FaultStatusWithNA | RO | ||||||||||||||||||
column · FaultStatusWithNA · read-only · current Near end end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) is enabled. alarm: Near end loopback is enabled. ok: Near end loopback is disabled. | |||||||||||||||||||||
| CifBasicSignalOpticalLayerMapping | 1.3.6.1.4.1.8708.2.46.2.4.1.1.13 | OpticalLayerMappingType | RW | ||||||||||||||||||
column · OpticalLayerMappingType · read-write · current The optical layer mapping. | |||||||||||||||||||||
| CifBasicSignalConfigurationMismatch | 1.3.6.1.4.1.8708.2.46.2.4.1.1.14 | FaultStatusWithNA | RO | deprecated | |||||||||||||||||
column · FaultStatusWithNA · read-only · deprecated The inserted transceiver does not support the
configuration of the optical layer mapping.
alarm: A transceiver with other supported optical layer
mapping than the requested mapping is inserted.
ok: The transceiver with the non-requested optical
layer mapping is removed, or the object is reconfigured. | |||||||||||||||||||||
| CifBasicSignalActualOpticalLayerMapping | 1.3.6.1.4.1.8708.2.46.2.4.1.1.15 | OpticalLayerMappingType | RO | ||||||||||||||||||
column · OpticalLayerMappingType · read-only · current The actual optical layer mapping. | |||||||||||||||||||||
| CifBasicSignalSpeed | 1.3.6.1.4.1.8708.2.46.2.4.1.1.16 | Unsigned32WithNA (61440..1402500 | 2147483647) | RW | ||||||||||||||||||
column · Unsigned32WithNA (61440..1402500 | 2147483647) · read-write · current The expected signal bit rate in units of 10,000 bits (0.01 Mb) per second. | |||||||||||||||||||||
| CifBasicSignalDirection | 1.3.6.1.4.1.8708.2.46.2.4.1.1.17 | SignalDirection | RO | ||||||||||||||||||
column · SignalDirection · read-only · current The direction in which this object is referred to. rx - In bound direction. (1) tx - out bound direction. (2) biDir - the interface has one connector used for both rx and tx. (3) txRx - the interface has two connectors one for tx and one for rx. (4) Not Available - the direction is not available. | |||||||||||||||||||||
| CifBasicSignalFormatConfigurable | 1.3.6.1.4.1.8708.2.46.2.4.1.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This atttribute indicates if the interface is format configurable or not true - The interface is format configurable false - The interface is not format configurable
| |||||||||||||||||||||
| CifBasicSignalFormatConfigurationSharedWithInterface | 1.3.6.1.4.1.8708.2.46.2.4.1.1.19 | Unsigned32WithNA | RO | ||||||||||||||||||
column · Unsigned32WithNA · read-only · current This attribute specifies whether this object instances shares the format configuration with another object instance. value == 0: it is not shared value != 0: it is shared with the interface object with index = value in IfBasicIfEntry If it is shared, it means that updating the format (and optionally speed) will affect the configuration of the other object instance | |||||||||||||||||||||
| CifBasicSignalPhysicalLayerMapping | 1.3.6.1.4.1.8708.2.46.2.4.1.1.20 | PhysicalLayerMappingType | RW | ||||||||||||||||||
column · PhysicalLayerMappingType · read-write · current The expected physical layer mapping. | |||||||||||||||||||||
| CifBasicSignalFacilityLoopback | 1.3.6.1.4.1.8708.2.46.2.4.1.1.21 | EnabledDisabledWithNA | RW | ||||||||||||||||||
column · EnabledDisabledWithNA · read-write · current The facility loopback setting. Rx is looped to Tx. The purpose of facility loopback is to test the line interface termination. disabled - Facility loopback is not set. This is the default setting. enabled - Facility loopback is set. | |||||||||||||||||||||
| CifBasicSignalFacilityLoopbackTimeout | 1.3.6.1.4.1.8708.2.46.2.4.1.1.22 | Time7200minNo0 | RW | ||||||||||||||||||
column · Time7200minNo0 · read-write · current Timeout for facility loopback to make sure connection to node is not lost if ppp link is broken. The unit is minutes. Note! This attribute is not saved in backup, meaning the loopback will be set to disabled when rebooting CU. | |||||||||||||||||||||
| CifBasicSignalFacilityLoopbackEnabled | 1.3.6.1.4.1.8708.2.46.2.4.1.1.23 | FaultStatusWithNA | RO | ||||||||||||||||||
column · FaultStatusWithNA · read-only · current Facility loopback is enabled. alarm: Facility loopback is enabled. ok: Facility loopback is disabled. | |||||||||||||||||||||
| CifBasicSignalTerminalLoopback | 1.3.6.1.4.1.8708.2.46.2.4.1.1.24 | EnabledDisabledWithNA | RW | ||||||||||||||||||
column · EnabledDisabledWithNA · read-write · current The terminal loopback setting. Tx is looped to Rx. The purpose of a terminal loopback is to test the path through the equipment (a cross-connect, mux/demux stage, or similar) and execute the loop close to the outgoing interface. disabled - Terminal loopback is not set. This is the default setting. enabled - Terminal loopback is set. | |||||||||||||||||||||
| CifBasicSignalTerminalLoopbackTimeout | 1.3.6.1.4.1.8708.2.46.2.4.1.1.25 | Time7200minNo0 | RW | ||||||||||||||||||
column · Time7200minNo0 · read-write · current Timeout for terminal loopback to make sure connection to node is not lost if ppp link is broken. The unit is minutes. Note! This attribute is not saved in backup, meaning the loopback will be set to disabled when rebooting CU. | |||||||||||||||||||||
| CifBasicSignalTerminalLoopbackEnabled | 1.3.6.1.4.1.8708.2.46.2.4.1.1.26 | FaultStatusWithNA | RO | ||||||||||||||||||
column · FaultStatusWithNA · read-only · current Terminal loopback is enabled. alarm: Terminal loopback is enabled. ok: Terminal loopback is disabled. | |||||||||||||||||||||
| CifBasicSignalConnectorType | 1.3.6.1.4.1.8708.2.46.2.4.1.1.27 | ConnectorType | RO | ||||||||||||||||||
column · ConnectorType · read-only · current The connector type. | |||||||||||||||||||||
Groups and compliance
- ifBasicAdminGroupV1
- ifBasicAdminGroupV2
- ifBasicAdminGroupV3
- ifBasicAdminGroupV4
- ifBasicGeneralGroupV1
- ifBasicIfGroupV1
- ifBasicIfGroupV2
- ifBasicIfGroupV3
- ifBasicSignalGroupV1
- ifBasicSignalGroupV2
- ifBasicSignalGroupV3
- ifBasicSignalGroupV4
- ifBasicSignalGroupV5
- ifBasicSignalGroupV6
- ifBasicSignalGroupV7
- lumIfBasicBasicComplV1
- lumIfBasicBasicComplV2
- lumIfBasicBasicComplV3
- lumIfBasicBasicComplV4
- lumIfBasicBasicComplV5
- lumIfBasicBasicComplV6
- lumIfBasicBasicComplV7
- lumIfBasicBasicComplV8