CORIANT-GROOVE-MIB
Nokia (formerly 'Coriant R&D GmbH')SNMP MIB for Groove G30 release 2.1.0
snmptranslate -m CORIANT-GROOVE-MIB -Tpsnmpwalk -v2c -c <community> -m CORIANT-GROOVE-MIB <host> 1.3.6.1.4.1.42229.1.2Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowPointer, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ncoriant | 1.3.6.1.4.1.42229 | ||||||||||||||||||||
| Nproducts | 1.3.6.1.4.1.42229.1 | ||||||||||||||||||||
| Igroove | 1.3.6.1.4.1.42229.1.2 | ||||||||||||||||||||
identity SNMP MIB for Groove G30 release 2.1.0 | |||||||||||||||||||||
| Nfault | 1.3.6.1.4.1.42229.1.2.1 | ||||||||||||||||||||
| NnotificationInfo | 1.3.6.1.4.1.42229.1.2.1.1 | ||||||||||||||||||||
| NnotificationObject | 1.3.6.1.4.1.42229.1.2.1.1.1 | ||||||||||||||||||||
| SnotificationFmEntity | 1.3.6.1.4.1.42229.1.2.1.1.1.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The management object instance which the alarm or condition is reported against. | |||||||||||||||||||||
| SnotificationConditionType | 1.3.6.1.4.1.42229.1.2.1.1.1.2 | CoriantFmtypesConditionType | RO | ||||||||||||||||||
scalar · CoriantFmtypesConditionType · read-only · current Identifies the current standing conditions which cause alarms and/or events. | |||||||||||||||||||||
| SnotificationLocation | 1.3.6.1.4.1.42229.1.2.1.1.1.3 | CoriantTypesManagementLocation | RO | ||||||||||||||||||
scalar · CoriantTypesManagementLocation · read-only · current Indicates if the alarm or event location is near end or far end. | |||||||||||||||||||||
| SnotificationDirection | 1.3.6.1.4.1.42229.1.2.1.1.1.4 | CoriantTypesManagementDirection | RO | ||||||||||||||||||
scalar · CoriantTypesManagementDirection · read-only · current Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA. | |||||||||||||||||||||
| SnotificationTimePeriod | 1.3.6.1.4.1.42229.1.2.1.1.1.5 | CoriantTypesManagementTimePeriod | RO | ||||||||||||||||||
scalar · CoriantTypesManagementTimePeriod · read-only · current Indicates the time-period increments during which PM data is collected. | |||||||||||||||||||||
| SnotificationServiceAffect | 1.3.6.1.4.1.42229.1.2.1.1.1.6 | CoriantFmtypesServiceAffectFm | RO | ||||||||||||||||||
scalar · CoriantFmtypesServiceAffectFm · read-only · current Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting. | |||||||||||||||||||||
| SnotificationSeverityLevel | 1.3.6.1.4.1.42229.1.2.1.1.1.7 | CoriantFmtypesSeverityLevel | RO | ||||||||||||||||||
scalar · CoriantFmtypesSeverityLevel · read-only · current Indicates the notification code (severity level) associated with the alarm type of service affecting. | |||||||||||||||||||||
| SnotificationOccurrenceDateTime | 1.3.6.1.4.1.42229.1.2.1.1.1.8 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
scalar · IetfYangTypesDateAndTime · read-only · current Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute. | |||||||||||||||||||||
| SnotificationConditionDescription | 1.3.6.1.4.1.42229.1.2.1.1.1.9 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..255)) · read-only · current Describes the condition that caused the alarm. | |||||||||||||||||||||
| SnotificationAlarmConditionType | 1.3.6.1.4.1.42229.1.2.1.1.1.10 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Alarm condition types, for example, standing or transient.
| |||||||||||||||||||||
| SnotificationLastSeverityLevel | 1.3.6.1.4.1.42229.1.2.1.1.1.11 | CoriantFmtypesSeverityLevel | RO | ||||||||||||||||||
scalar · CoriantFmtypesSeverityLevel · read-only · current Indicates the last severity level associated with the alarm type, which provides the info of alarm severity declared and cleared. | |||||||||||||||||||||
| SnotificationExtensionDescription | 1.3.6.1.4.1.42229.1.2.1.1.1.12 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..255)) · read-only · current The description in alarm notification to provide additional information. | |||||||||||||||||||||
| SnotificationFmEntityType | 1.3.6.1.4.1.42229.1.2.1.1.1.13 | CoriantFmtypesEntityTypeFm | RO | ||||||||||||||||||
scalar · CoriantFmtypesEntityTypeFm · read-only · current Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application. | |||||||||||||||||||||
| NnotificationTrap | 1.3.6.1.4.1.42229.1.2.1.2 | ||||||||||||||||||||
| !alarmNotification | 1.3.6.1.4.1.42229.1.2.1.2.1 | ||||||||||||||||||||
notification · current <description>
| |||||||||||||||||||||
| !notAlarmedEventNotification | 1.3.6.1.4.1.42229.1.2.1.2.2 | ||||||||||||||||||||
notification · current <description>
| |||||||||||||||||||||
| NalarmProfile | 1.3.6.1.4.1.42229.1.2.1.4 | ||||||||||||||||||||
| TalarmProfileTable | 1.3.6.1.4.1.42229.1.2.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current Alarm profile defines the severity profile of alarm and event. | |||||||||||||||||||||
| RalarmProfileEntry | 1.3.6.1.4.1.42229.1.2.1.4.1.1 | NA | |||||||||||||||||||
| CalarmProfileId | 1.3.6.1.4.1.42229.1.2.1.4.1.1.1 | Unsigned32 (1..255) | RO | ||||||||||||||||||
column · Unsigned32 (1..255) · read-only · current alarm profile identifier which uniquely specify alarm profile. alarm profile 1 is supported firstly and applicable to all entities implicitly. | |||||||||||||||||||||
| NalarmProfileENTR | 1.3.6.1.4.1.42229.1.2.1.5 | ||||||||||||||||||||
| TalarmProfileENTRTable | 1.3.6.1.4.1.42229.1.2.1.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The list includes alarm/event entries of an alarm-profile. | |||||||||||||||||||||
| RalarmProfileENTREntry | 1.3.6.1.4.1.42229.1.2.1.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of alarmProfileENTRTable | |||||||||||||||||||||
| CalarmProfileENTRConditionType | 1.3.6.1.4.1.42229.1.2.1.5.1.1.1 | CoriantFmtypesConditionType | RO | ||||||||||||||||||
column · CoriantFmtypesConditionType · read-only · current Identifies the current standing conditions which cause conditions and/or events. | |||||||||||||||||||||
| CalarmProfileENTRFmEntityType | 1.3.6.1.4.1.42229.1.2.1.5.1.1.2 | CoriantFmtypesEntityTypeFm | RO | ||||||||||||||||||
column · CoriantFmtypesEntityTypeFm · read-only · current Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application. | |||||||||||||||||||||
| CalarmProfileENTRTimePeriod | 1.3.6.1.4.1.42229.1.2.1.5.1.1.3 | CoriantTypesManagementTimePeriod | RO | ||||||||||||||||||
column · CoriantTypesManagementTimePeriod · read-only · current Indicates the time-period increments during which PM data is collected. | |||||||||||||||||||||
| CalarmProfileENTRSeverityLevelSa | 1.3.6.1.4.1.42229.1.2.1.5.1.1.4 | CoriantFmtypesSeverityLevel | RO | ||||||||||||||||||
column · CoriantFmtypesSeverityLevel · read-only · current Indicates the notification code (severity level) associated with the condition type of service affecting. | |||||||||||||||||||||
| CalarmProfileENTRSeverityLevelNsa | 1.3.6.1.4.1.42229.1.2.1.5.1.1.5 | CoriantFmtypesSeverityLevel | RO | ||||||||||||||||||
column · CoriantFmtypesSeverityLevel · read-only · current Indicates the notification code (severity level) associated with the condition type of non-service affecting. | |||||||||||||||||||||
| NstandingCondition | 1.3.6.1.4.1.42229.1.2.1.6 | ||||||||||||||||||||
| TstandingConditionTable | 1.3.6.1.4.1.42229.1.2.1.6.1 | NA | |||||||||||||||||||
table · not-accessible · current The list includes active standing alarms. | |||||||||||||||||||||
| RstandingConditionEntry | 1.3.6.1.4.1.42229.1.2.1.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of standingConditionTable | |||||||||||||||||||||
| CstandingConditionFmEntity | 1.3.6.1.4.1.42229.1.2.1.6.1.1.1 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current The management object instance which the alarm or condition is reported against. | |||||||||||||||||||||
| CstandingConditionConditionType | 1.3.6.1.4.1.42229.1.2.1.6.1.1.2 | CoriantFmtypesConditionType | RO | ||||||||||||||||||
column · CoriantFmtypesConditionType · read-only · current Identifies the current standing conditions which cause alarms and/or events. | |||||||||||||||||||||
| CstandingConditionLocation | 1.3.6.1.4.1.42229.1.2.1.6.1.1.3 | CoriantTypesManagementLocation | RO | ||||||||||||||||||
column · CoriantTypesManagementLocation · read-only · current Indicates if the alarm or event location is near end or far end. | |||||||||||||||||||||
| CstandingConditionDirection | 1.3.6.1.4.1.42229.1.2.1.6.1.1.4 | CoriantTypesManagementDirection | RO | ||||||||||||||||||
column · CoriantTypesManagementDirection · read-only · current Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA. | |||||||||||||||||||||
| CstandingConditionTimePeriod | 1.3.6.1.4.1.42229.1.2.1.6.1.1.5 | CoriantTypesManagementTimePeriod | RO | ||||||||||||||||||
column · CoriantTypesManagementTimePeriod · read-only · current Indicates the time-period increments during which PM data is collected. | |||||||||||||||||||||
| CstandingConditionServiceAffect | 1.3.6.1.4.1.42229.1.2.1.6.1.1.6 | CoriantFmtypesServiceAffectFm | RO | ||||||||||||||||||
column · CoriantFmtypesServiceAffectFm · read-only · current Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting. | |||||||||||||||||||||
| CstandingConditionSeverityLevel | 1.3.6.1.4.1.42229.1.2.1.6.1.1.7 | CoriantFmtypesSeverityLevel | RO | ||||||||||||||||||
column · CoriantFmtypesSeverityLevel · read-only · current Indicates the notification code (severity level) associated with the alarm type of service affecting. | |||||||||||||||||||||
| CstandingConditionOccurrenceDateTime | 1.3.6.1.4.1.42229.1.2.1.6.1.1.8 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute. | |||||||||||||||||||||
| CstandingConditionConditionDescription | 1.3.6.1.4.1.42229.1.2.1.6.1.1.9 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current Describes the condition that caused the alarm. | |||||||||||||||||||||
| CstandingConditionFmEntityType | 1.3.6.1.4.1.42229.1.2.1.6.1.1.10 | CoriantFmtypesEntityTypeFm | RO | ||||||||||||||||||
column · CoriantFmtypesEntityTypeFm · read-only · current Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application. | |||||||||||||||||||||
| Nne | 1.3.6.1.4.1.42229.1.2.2 | ||||||||||||||||||||
| NneInfo | 1.3.6.1.4.1.42229.1.2.2.1 | ||||||||||||||||||||
| SneId | 1.3.6.1.4.1.42229.1.2.2.1.1 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..256)) · read-only · current Network Element's system identification code. Note that this is unique identifier for each NE. default value : | |||||||||||||||||||||
| SneName | 1.3.6.1.4.1.42229.1.2.2.1.2 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..256)) · read-only · current Name assigned to this particular NE. A readable name for the NE. It can be used for NE. But not expected to be used by NM for unique NE identification The different function from ne-id is that user can keep ne-id unchanged, which uniquely identifies the NE, and update ne-name if necessary. default value : | |||||||||||||||||||||
| SneType | 1.3.6.1.4.1.42229.1.2.2.1.3 | OCTET STRING | RO | GROOVE_G30 | |||||||||||||||||
scalar · OCTET STRING · read-only · current Type of the NE default value :GROOVE_G30 Example values from LibreNMS test devices
| |||||||||||||||||||||
| SneLocation | 1.3.6.1.4.1.42229.1.2.2.1.4 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..256)) · read-only · current Name of the location of this particular NE | |||||||||||||||||||||
| SneSite | 1.3.6.1.4.1.42229.1.2.2.1.5 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..64)) · read-only · current Name or CLLI of the site where this NE is located | |||||||||||||||||||||
| SneAltitude | 1.3.6.1.4.1.42229.1.2.2.1.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The altitude of the Network Element in meters UNITS:meters | |||||||||||||||||||||
| SneVendor | 1.3.6.1.4.1.42229.1.2.2.1.7 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Vendor name of this NE default value :Coriant | |||||||||||||||||||||
| SneTemperature | 1.3.6.1.4.1.42229.1.2.2.1.8 | CoriantTypesTemperature | RO | ||||||||||||||||||
scalar · CoriantTypesTemperature · read-only · current Ambient temperature sensed by the primary shelf for NE level | |||||||||||||||||||||
| Nsystem | 1.3.6.1.4.1.42229.1.2.2.2 | ||||||||||||||||||||
| SsystemUnknownPluggableReport | 1.3.6.1.4.1.42229.1.2.2.2.1 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
scalar · CoriantTypesEnableSwitch · read-only · current The attribute will enable/disable the alarm reporting for unknown pluggables present on the NE. default value :enabled | |||||||||||||||||||||
| SsystemPowerConsumptionCurrent | 1.3.6.1.4.1.42229.1.2.2.2.2 | CoriantTypesPower | RO | ||||||||||||||||||
scalar · CoriantTypesPower · read-only · current Current power consumption of the system. | |||||||||||||||||||||
| SsystemPowerConsumptionEstimatedMax | 1.3.6.1.4.1.42229.1.2.2.2.3 | CoriantTypesPower | RO | ||||||||||||||||||
scalar · CoriantTypesPower · read-only · current Derived maximal power consumption around room temperature. | |||||||||||||||||||||
| SsystemFactoryResetButton | 1.3.6.1.4.1.42229.1.2.2.2.4 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
scalar · CoriantTypesEnableSwitch · read-only · current The attribute will enable/disable factory reset button function on the NE. default value :enabled | |||||||||||||||||||||
| Nconsole | 1.3.6.1.4.1.42229.1.2.2.3 | ||||||||||||||||||||
| SconsoleBaudRate | 1.3.6.1.4.1.42229.1.2.2.3.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The baud rate of console port default value :9600
| |||||||||||||||||||||
| Nequipment | 1.3.6.1.4.1.42229.1.2.3 | ||||||||||||||||||||
| Nshelf | 1.3.6.1.4.1.42229.1.2.3.1 | ||||||||||||||||||||
| TshelfTable | 1.3.6.1.4.1.42229.1.2.3.1.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RshelfEntry | 1.3.6.1.4.1.42229.1.2.3.1.1.1 | NA | |||||||||||||||||||
| CshelfId | 1.3.6.1.4.1.42229.1.2.3.1.1.1.1 | CoriantTypesShelfId | RO | 1 | |||||||||||||||||
column · CoriantTypesShelfId · read-only · current Identifier of the shelf. It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CshelfLocation | 1.3.6.1.4.1.42229.1.2.3.1.1.1.2 | OCTET STRING (SIZE (0..64)) | RO | The Datacentre | |||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Name of the location of this particular shelf. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CshelfInletTemperature | 1.3.6.1.4.1.42229.1.2.3.1.1.1.3 | CoriantTypesTemperature | RO | 23.8 | |||||||||||||||||
column · CoriantTypesTemperature · read-only · current shelf inlet temperature Example values from LibreNMS test devices
| |||||||||||||||||||||
| CshelfOutletTemperature | 1.3.6.1.4.1.42229.1.2.3.1.1.1.4 | CoriantTypesTemperature | RO | 27.1 | |||||||||||||||||
column · CoriantTypesTemperature · read-only · current shelf outlet temperature Example values from LibreNMS test devices
| |||||||||||||||||||||
| CshelfAdminStatus | 1.3.6.1.4.1.42229.1.2.3.1.1.1.5 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CshelfOperStatus | 1.3.6.1.4.1.42229.1.2.3.1.1.1.6 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CshelfAvailStatus | 1.3.6.1.4.1.42229.1.2.3.1.1.1.7 | Bits | RO | 00 00 00 00 | |||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CshelfAliasName | 1.3.6.1.4.1.42229.1.2.3.1.1.1.8 | OCTET STRING (SIZE (0..256)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nslot | 1.3.6.1.4.1.42229.1.2.3.2 | ||||||||||||||||||||
| TslotTable | 1.3.6.1.4.1.42229.1.2.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RslotEntry | 1.3.6.1.4.1.42229.1.2.3.2.1.1 | NA | |||||||||||||||||||
| CslotId | 1.3.6.1.4.1.42229.1.2.3.2.1.1.1 | CoriantTypesSlotId | RO | 1 | |||||||||||||||||
column · CoriantTypesSlotId · read-only · current Identifier of the slot. It shall be an integer number and assigned implicitly by the system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotActualCardType | 1.3.6.1.4.1.42229.1.2.3.2.1.1.2 | CoriantTypesEquipmentType | RO | 17 | |||||||||||||||||
column · CoriantTypesEquipmentType · read-only · current Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotPossibleCardTypes | 1.3.6.1.4.1.42229.1.2.3.2.1.1.3 | OCTET STRING | RO | OMD48-O, OMD48-S, OMD96, OCC2, CHM2LH, CHM1LH, … | |||||||||||||||||
column · OCTET STRING · read-only · current Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotAdminStatus | 1.3.6.1.4.1.42229.1.2.3.2.1.1.4 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotOperStatus | 1.3.6.1.4.1.42229.1.2.3.2.1.1.5 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotAvailStatus | 1.3.6.1.4.1.42229.1.2.3.2.1.1.6 | Bits | RO | 00 00 00 00 | |||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotAliasName | 1.3.6.1.4.1.42229.1.2.3.2.1.1.7 | OCTET STRING (SIZE (0..256)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ncard | 1.3.6.1.4.1.42229.1.2.3.3 | ||||||||||||||||||||
| TcardTable | 1.3.6.1.4.1.42229.1.2.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current Card is a container carried by a slot. | |||||||||||||||||||||
| RcardEntry | 1.3.6.1.4.1.42229.1.2.3.3.1.1 | NA | |||||||||||||||||||
| CcardRequiredType | 1.3.6.1.4.1.42229.1.2.3.3.1.1.1 | CoriantTypesCardType | RO | 17 | |||||||||||||||||
column · CoriantTypesCardType · read-only · current The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardEquipmentName | 1.3.6.1.4.1.42229.1.2.3.3.1.1.2 | OCTET STRING (SIZE (0..64)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current The attribute indicates an additional field to identify the module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardAdminStatus | 1.3.6.1.4.1.42229.1.2.3.3.1.1.3 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardOperStatus | 1.3.6.1.4.1.42229.1.2.3.3.1.1.4 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardAvailStatus | 1.3.6.1.4.1.42229.1.2.3.3.1.1.5 | Bits | RO | 00 00 00 00 | |||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardAliasName | 1.3.6.1.4.1.42229.1.2.3.3.1.1.6 | OCTET STRING (SIZE (0..256)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardFanSpeedRate | 1.3.6.1.4.1.42229.1.2.3.3.1.1.7 | CoriantTypesPercentage | RO | 60 | |||||||||||||||||
column · CoriantTypesPercentage · read-only · current The fan speed of percentage. Conditions:../required-type = 'FAN' Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardSwitchingType | 1.3.6.1.4.1.42229.1.2.3.3.1.1.8 | INTEGER | RO | otn(0) | |||||||||||||||||
column · INTEGER · read-only · current The traffic switching type of card. Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') default value :otn
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardTemperature | 1.3.6.1.4.1.42229.1.2.3.3.1.1.9 | CoriantTypesTemperature | RO | 34.0 | |||||||||||||||||
column · CoriantTypesTemperature · read-only · current Temperature at the monitoring point. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcardMode | 1.3.6.1.4.1.42229.1.2.3.3.1.1.10 | INTEGER | RO | normal(1) | |||||||||||||||||
column · INTEGER · read-only · current Specify the card mode, e.g. normal or regen. default value :normal
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nsubslot | 1.3.6.1.4.1.42229.1.2.3.4 | ||||||||||||||||||||
| TsubslotTable | 1.3.6.1.4.1.42229.1.2.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RsubslotEntry | 1.3.6.1.4.1.42229.1.2.3.4.1.1 | NA | |||||||||||||||||||
| CsubslotId | 1.3.6.1.4.1.42229.1.2.3.4.1.1.1 | CoriantTypesSlotId | RO | ||||||||||||||||||
column · CoriantTypesSlotId · read-only · current Identifier of the subslot. | |||||||||||||||||||||
| CsubslotActualCardType | 1.3.6.1.4.1.42229.1.2.3.4.1.1.2 | CoriantTypesEquipmentType | RO | ||||||||||||||||||
column · CoriantTypesEquipmentType · read-only · current Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty | |||||||||||||||||||||
| CsubslotPossibleCardTypes | 1.3.6.1.4.1.42229.1.2.3.4.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs. | |||||||||||||||||||||
| CsubslotAdminStatus | 1.3.6.1.4.1.42229.1.2.3.4.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CsubslotOperStatus | 1.3.6.1.4.1.42229.1.2.3.4.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CsubslotAvailStatus | 1.3.6.1.4.1.42229.1.2.3.4.1.1.6 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CsubslotAliasName | 1.3.6.1.4.1.42229.1.2.3.4.1.1.7 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Nsubcard | 1.3.6.1.4.1.42229.1.2.3.5 | ||||||||||||||||||||
| TsubcardTable | 1.3.6.1.4.1.42229.1.2.3.5.1 | NA | |||||||||||||||||||
table · not-accessible · current Subcard is a container carried by a subslot. | |||||||||||||||||||||
| RsubcardEntry | 1.3.6.1.4.1.42229.1.2.3.5.1.1 | NA | |||||||||||||||||||
| CsubcardRequiredType | 1.3.6.1.4.1.42229.1.2.3.5.1.1.1 | CoriantTypesCardType | RO | ||||||||||||||||||
column · CoriantTypesCardType · read-only · current The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model. | |||||||||||||||||||||
| CsubcardEquipmentName | 1.3.6.1.4.1.42229.1.2.3.5.1.1.2 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current The attribute indicates an additional field to identify the module. | |||||||||||||||||||||
| CsubcardAdminStatus | 1.3.6.1.4.1.42229.1.2.3.5.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CsubcardOperStatus | 1.3.6.1.4.1.42229.1.2.3.5.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CsubcardAvailStatus | 1.3.6.1.4.1.42229.1.2.3.5.1.1.5 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
| |||||||||||||||||||||
| CsubcardAliasName | 1.3.6.1.4.1.42229.1.2.3.5.1.1.6 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CsubcardTemperature | 1.3.6.1.4.1.42229.1.2.3.5.1.1.7 | CoriantTypesTemperature | RO | ||||||||||||||||||
column · CoriantTypesTemperature · read-only · current Temperature at the monitoring point. | |||||||||||||||||||||
| Nport | 1.3.6.1.4.1.42229.1.2.3.6 | ||||||||||||||||||||
| TportTable | 1.3.6.1.4.1.42229.1.2.3.6.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RportEntry | 1.3.6.1.4.1.42229.1.2.3.6.1.1 | NA | |||||||||||||||||||
| CportId | 1.3.6.1.4.1.42229.1.2.3.6.1.1.1 | CoriantTypesPortId | RO | 1 | |||||||||||||||||
column · CoriantTypesPortId · read-only · current The identifier is defined to uniquely identify the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportPossiblePluggableTypes | 1.3.6.1.4.1.42229.1.2.3.6.1.1.2 | OCTET STRING | RO | CFP2 | |||||||||||||||||
column · OCTET STRING · read-only · current Defined all the pluggable types which can be equipped on the port. Needs to be re-defined in the project specific model. This is a leaf list, encode by some leafs. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportActualPluggableType | 1.3.6.1.4.1.42229.1.2.3.6.1.1.3 | CoriantTypesEquipmentType | RO | 22 | |||||||||||||||||
column · CoriantTypesEquipmentType · read-only · current Pluggable type for each port according to the actually equipping. Needs to be re-defined in the project specific model. Conditions:../port-type != 'optical' default value :empty Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportRxOpticalPower | 1.3.6.1.4.1.42229.1.2.3.6.1.1.4 | CoriantTypesOpticalPower | RO | -14.5 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportTxOpticalPower | 1.3.6.1.4.1.42229.1.2.3.6.1.1.5 | CoriantTypesOpticalPower | RO | 0.0 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportRxOpticalPowerSelectedChannel | 1.3.6.1.4.1.42229.1.2.3.6.1.1.6 | CoriantTypesOpticalPower | RO | -14.7 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Optical power of the selected channel on coherent receiver, which will be different from the rx-optical-power when multiple channels input simultaneously. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportRxOpticalPowerLane1 | 1.3.6.1.4.1.42229.1.2.3.6.1.1.7 | CoriantTypesOpticalPower | RO | -0.2 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power of lane 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportRxOpticalPowerLane2 | 1.3.6.1.4.1.42229.1.2.3.6.1.1.8 | CoriantTypesOpticalPower | RO | -0.5 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power of lane 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportRxOpticalPowerLane3 | 1.3.6.1.4.1.42229.1.2.3.6.1.1.9 | CoriantTypesOpticalPower | RO | -0.3 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power of lane 3. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportRxOpticalPowerLane4 | 1.3.6.1.4.1.42229.1.2.3.6.1.1.10 | CoriantTypesOpticalPower | RO | -0.3 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power of lane 4. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportTxOpticalPowerLane1 | 1.3.6.1.4.1.42229.1.2.3.6.1.1.11 | CoriantTypesOpticalPower | RO | 0.3 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power lane 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportTxOpticalPowerLane2 | 1.3.6.1.4.1.42229.1.2.3.6.1.1.12 | CoriantTypesOpticalPower | RO | 0.3 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power lane 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportTxOpticalPowerLane3 | 1.3.6.1.4.1.42229.1.2.3.6.1.1.13 | CoriantTypesOpticalPower | RO | 0.3 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power lane 3. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportTxOpticalPowerLane4 | 1.3.6.1.4.1.42229.1.2.3.6.1.1.14 | CoriantTypesOpticalPower | RO | 0.3 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power lane 4. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportDirectionType | 1.3.6.1.4.1.42229.1.2.3.6.1.1.15 | CoriantTypesTypeOfDirection | RO | ||||||||||||||||||
column · CoriantTypesTypeOfDirection · read-only · current Supported direction of the optical port. | |||||||||||||||||||||
| CportName | 1.3.6.1.4.1.42229.1.2.3.6.1.1.16 | CoriantTypesNameIdentifier | RO | 01:Line:TxRx | |||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current The name of the port. default value :unspecified Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportType | 1.3.6.1.4.1.42229.1.2.3.6.1.1.17 | INTEGER | RO | line(2) | |||||||||||||||||
column · INTEGER · read-only · current The type of port. Needs to be provided upon Port creation
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportMode | 1.3.6.1.4.1.42229.1.2.3.6.1.1.18 | CoriantTypesPortMode | RO | 7 | |||||||||||||||||
column · CoriantTypesPortMode · read-only · current The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') default value :not-applicable Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportAdminStatus | 1.3.6.1.4.1.42229.1.2.3.6.1.1.19 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportOperStatus | 1.3.6.1.4.1.42229.1.2.3.6.1.1.20 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportAvailStatus | 1.3.6.1.4.1.42229.1.2.3.6.1.1.21 | Bits | RO | 00 00 00 00 | |||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportAliasName | 1.3.6.1.4.1.42229.1.2.3.6.1.1.22 | OCTET STRING (SIZE (0..256)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportServiceLabel | 1.3.6.1.4.1.42229.1.2.3.6.1.1.23 | OCTET STRING (SIZE (0..128)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportConnectedTo | 1.3.6.1.4.1.42229.1.2.3.6.1.1.24 | OCTET STRING (SIZE (0..128)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Indicate neighbour port/facility entity to which the current port/facility is connected to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportArcConfig | 1.3.6.1.4.1.42229.1.2.3.6.1.1.25 | INTEGER | RO | nalmQi(2) | |||||||||||||||||
column · INTEGER · read-only · current The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportArcState | 1.3.6.1.4.1.42229.1.2.3.6.1.1.26 | INTEGER | RO | alm(1) | |||||||||||||||||
column · INTEGER · read-only · current The current mode of the Alarm Report Control (ARC).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportArcSubState | 1.3.6.1.4.1.42229.1.2.3.6.1.1.27 | INTEGER | RO | notApplicable(0) | |||||||||||||||||
column · INTEGER · read-only · current Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportArcTimer | 1.3.6.1.4.1.42229.1.2.3.6.1.1.28 | Unsigned32 (0..10080) | RO | 1440 | |||||||||||||||||
column · Unsigned32 (0..10080) · read-only · current The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportArcRemainingTime | 1.3.6.1.4.1.42229.1.2.3.6.1.1.29 | OCTET STRING | RO | 00d-00h:00m:00s | |||||||||||||||||
column · OCTET STRING · read-only · current The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CportExternalConnectivity | 1.3.6.1.4.1.42229.1.2.3.6.1.1.30 | CoriantTypesYesNo | RO | 2 | |||||||||||||||||
column · CoriantTypesYesNo · read-only · current Indicates the port is connected externally or not. default value :no Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nsubport | 1.3.6.1.4.1.42229.1.2.3.7 | ||||||||||||||||||||
| TsubportTable | 1.3.6.1.4.1.42229.1.2.3.7.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RsubportEntry | 1.3.6.1.4.1.42229.1.2.3.7.1.1 | NA | |||||||||||||||||||
| CsubportId | 1.3.6.1.4.1.42229.1.2.3.7.1.1.1 | CoriantTypesPortId | RO | ||||||||||||||||||
column · CoriantTypesPortId · read-only · current The identifier is defined to uniquely identify the subport. | |||||||||||||||||||||
| CsubportPortName | 1.3.6.1.4.1.42229.1.2.3.7.1.1.2 | CoriantTypesNameIdentifier | RO | ||||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current The name of the port. default value :unspecified | |||||||||||||||||||||
| CsubportPortType | 1.3.6.1.4.1.42229.1.2.3.7.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of port. Needs to be provided upon Port creation
| |||||||||||||||||||||
| CsubportPortMode | 1.3.6.1.4.1.42229.1.2.3.7.1.1.4 | CoriantTypesPortMode | RO | ||||||||||||||||||
column · CoriantTypesPortMode · read-only · current The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') default value :not-applicable | |||||||||||||||||||||
| CsubportAdminStatus | 1.3.6.1.4.1.42229.1.2.3.7.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CsubportOperStatus | 1.3.6.1.4.1.42229.1.2.3.7.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CsubportAvailStatus | 1.3.6.1.4.1.42229.1.2.3.7.1.1.7 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CsubportAliasName | 1.3.6.1.4.1.42229.1.2.3.7.1.1.8 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CsubportServiceLabel | 1.3.6.1.4.1.42229.1.2.3.7.1.1.9 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| CsubportConnectedTo | 1.3.6.1.4.1.42229.1.2.3.7.1.1.10 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Indicate neighbour port/facility entity to which the current port/facility is connected to. | |||||||||||||||||||||
| CsubportArcConfig | 1.3.6.1.4.1.42229.1.2.3.7.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi
| |||||||||||||||||||||
| CsubportArcState | 1.3.6.1.4.1.42229.1.2.3.7.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current mode of the Alarm Report Control (ARC).
| |||||||||||||||||||||
| CsubportArcSubState | 1.3.6.1.4.1.42229.1.2.3.7.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr
| |||||||||||||||||||||
| CsubportArcTimer | 1.3.6.1.4.1.42229.1.2.3.7.1.1.14 | Unsigned32 (0..10080) | RO | ||||||||||||||||||
column · Unsigned32 (0..10080) · read-only · current The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440 | |||||||||||||||||||||
| CsubportArcRemainingTime | 1.3.6.1.4.1.42229.1.2.3.7.1.1.15 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported. | |||||||||||||||||||||
| CsubportRxOpticalPower | 1.3.6.1.4.1.42229.1.2.3.7.1.1.16 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power | |||||||||||||||||||||
| CsubportTxOpticalPower | 1.3.6.1.4.1.42229.1.2.3.7.1.1.17 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power | |||||||||||||||||||||
| CsubportExternalConnectivity | 1.3.6.1.4.1.42229.1.2.3.7.1.1.18 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Indicates the port is connected externally or not. default value :no | |||||||||||||||||||||
| Npluggable | 1.3.6.1.4.1.42229.1.2.3.8 | ||||||||||||||||||||
| TpluggableTable | 1.3.6.1.4.1.42229.1.2.3.8.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the Pluggable object | |||||||||||||||||||||
| RpluggableEntry | 1.3.6.1.4.1.42229.1.2.3.8.1.1 | NA | |||||||||||||||||||
| CpluggableRequiredType | 1.3.6.1.4.1.42229.1.2.3.8.1.1.1 | CoriantTypesPluggableType | RO | ||||||||||||||||||
column · CoriantTypesPluggableType · read-only · current The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model. | |||||||||||||||||||||
| CpluggableFormFactor | 1.3.6.1.4.1.42229.1.2.3.8.1.1.2 | CoriantTypesPluggableFormFactor | RO | ||||||||||||||||||
column · CoriantTypesPluggableFormFactor · read-only · current Indicating the exact form factor of the pluggable. default value :Unrecognized | |||||||||||||||||||||
| CpluggableInterfaceType | 1.3.6.1.4.1.42229.1.2.3.8.1.1.3 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Indicating interface type of the pluggable. default value : | |||||||||||||||||||||
| CpluggableLaserSource | 1.3.6.1.4.1.42229.1.2.3.8.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of laser frequency. Only tx-lo-independent type support och-os rx-frequency working Conditions:../required-type = 'CFP2' default value :not-available
| |||||||||||||||||||||
| CpluggableHwVersion | 1.3.6.1.4.1.42229.1.2.3.8.1.1.5 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current The attribute Identifies the Hardware Version of the module that populates the slot. | |||||||||||||||||||||
| CpluggableVendor | 1.3.6.1.4.1.42229.1.2.3.8.1.1.6 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Vendor information. | |||||||||||||||||||||
| CpluggableSerialNumber | 1.3.6.1.4.1.42229.1.2.3.8.1.1.7 | OCTET STRING (SIZE (0..18)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..18)) · read-only · current This is the value of serial number stored in EEPROM of the equipment. | |||||||||||||||||||||
| CpluggableFwVersion | 1.3.6.1.4.1.42229.1.2.3.8.1.1.8 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current Current Firmware (FW) version on the equipment. | |||||||||||||||||||||
| CpluggablePartNumber | 1.3.6.1.4.1.42229.1.2.3.8.1.1.9 | OCTET STRING (SIZE (0..18)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..18)) · read-only · current Identifies the Part Number of the equipment. | |||||||||||||||||||||
| CpluggableClei | 1.3.6.1.4.1.42229.1.2.3.8.1.1.10 | OCTET STRING (SIZE (0..18)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..18)) · read-only · current Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages. | |||||||||||||||||||||
| CpluggableEquipmentName | 1.3.6.1.4.1.42229.1.2.3.8.1.1.11 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current The attribute indicates an additional field to identify the module. | |||||||||||||||||||||
| CpluggableAdminStatus | 1.3.6.1.4.1.42229.1.2.3.8.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CpluggableOperStatus | 1.3.6.1.4.1.42229.1.2.3.8.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CpluggableAvailStatus | 1.3.6.1.4.1.42229.1.2.3.8.1.1.14 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
| |||||||||||||||||||||
| CpluggableAliasName | 1.3.6.1.4.1.42229.1.2.3.8.1.1.15 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CpluggableTemperature | 1.3.6.1.4.1.42229.1.2.3.8.1.1.16 | CoriantTypesTemperature | RO | ||||||||||||||||||
column · CoriantTypesTemperature · read-only · current Temperature at the monitoring point. | |||||||||||||||||||||
| Namplifier | 1.3.6.1.4.1.42229.1.2.3.9 | ||||||||||||||||||||
| TamplifierTable | 1.3.6.1.4.1.42229.1.2.3.9.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of optical amplifier on an equipment. | |||||||||||||||||||||
| RamplifierEntry | 1.3.6.1.4.1.42229.1.2.3.9.1.1 | NA | |||||||||||||||||||
| CamplifierName | 1.3.6.1.4.1.42229.1.2.3.9.1.1.1 | CoriantTypesNameIdentifier | RO | ||||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current User-defined name assigned to identify a specific amplifier in the device | |||||||||||||||||||||
| CamplifierSupportingInputPort | 1.3.6.1.4.1.42229.1.2.3.9.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Identifier of the supporting input port. | |||||||||||||||||||||
| CamplifierSupportingOutputPort | 1.3.6.1.4.1.42229.1.2.3.9.1.1.3 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Identifier of the supporting output port. | |||||||||||||||||||||
| CamplifierAdminStatus | 1.3.6.1.4.1.42229.1.2.3.9.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CamplifierOperStatus | 1.3.6.1.4.1.42229.1.2.3.9.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CamplifierAvailStatus | 1.3.6.1.4.1.42229.1.2.3.9.1.1.6 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CamplifierAliasName | 1.3.6.1.4.1.42229.1.2.3.9.1.1.7 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CamplifierEnable | 1.3.6.1.4.1.42229.1.2.3.9.1.1.8 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Configuration for enable or disable the amplifier. default value :disabled | |||||||||||||||||||||
| CamplifierInputLosShutdown | 1.3.6.1.4.1.42229.1.2.3.9.1.1.9 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Enable or disable the function of automatic shutdown per input LOS. default value :enabled | |||||||||||||||||||||
| CamplifierControlMode | 1.3.6.1.4.1.42229.1.2.3.9.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Control mode of the amplifier. default value :auto
| |||||||||||||||||||||
| CamplifierMode | 1.3.6.1.4.1.42229.1.2.3.9.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operating mode of the amplifier default value :constant-gain
| |||||||||||||||||||||
| CamplifierType | 1.3.6.1.4.1.42229.1.2.3.9.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Type of the amplifier. default value :variable-gain-EDFA
| |||||||||||||||||||||
| CamplifierTargetGain | 1.3.6.1.4.1.42229.1.2.3.9.1.1.13 | CoriantTypesOpticalDB | RO | ||||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current Setting gain to the amplifier for constant-gain mode in manual control mode. | |||||||||||||||||||||
| CamplifierOperatingGain | 1.3.6.1.4.1.42229.1.2.3.9.1.1.14 | CoriantTypesOpticalDB | RO | ||||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current Operating gain of the amplifier, which is the actually configured gain on the amplifier. | |||||||||||||||||||||
| CamplifierGainAdjustment | 1.3.6.1.4.1.42229.1.2.3.9.1.1.15 | CoriantTypesOpticalDB | RO | ||||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current The value is used for adjustment of gain when the amplifier in automatic control mode, the automatically caculated gain will include offset of this attribute. default value :0.0 | |||||||||||||||||||||
| CamplifierGainRangeMin | 1.3.6.1.4.1.42229.1.2.3.9.1.1.16 | CoriantTypesOpticalDB | RO | ||||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current The minimum of settable gain. | |||||||||||||||||||||
| CamplifierGainRangeMax | 1.3.6.1.4.1.42229.1.2.3.9.1.1.17 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current The maximum of settable gain. UNITS:dB | |||||||||||||||||||||
| CamplifierOutputPowerMon | 1.3.6.1.4.1.42229.1.2.3.9.1.1.18 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Monitored aggregation signal output power. UNITS:dBm | |||||||||||||||||||||
| CamplifierOutputPowerMonWithAse | 1.3.6.1.4.1.42229.1.2.3.9.1.1.19 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Monitored aggregation total output power including both signal and ASE. UNITS:dBm | |||||||||||||||||||||
| CamplifierInputPowerMon | 1.3.6.1.4.1.42229.1.2.3.9.1.1.20 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Monitored aggregation input power. UNITS:dBm | |||||||||||||||||||||
| CamplifierOutputVoa | 1.3.6.1.4.1.42229.1.2.3.9.1.1.21 | CoriantTypesOpticalDB | RO | ||||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current Configurable optical attenuation at output of the amplifier. default value :0.0 | |||||||||||||||||||||
| CamplifierPowerBeforeOutputVoa | 1.3.6.1.4.1.42229.1.2.3.9.1.1.22 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Monitored optical power after output VOA. UNITS:dBm | |||||||||||||||||||||
| Ntdc | 1.3.6.1.4.1.42229.1.2.3.10 | ||||||||||||||||||||
| TtdcTable | 1.3.6.1.4.1.42229.1.2.3.10.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of optical tdc on an equipment. | |||||||||||||||||||||
| RtdcEntry | 1.3.6.1.4.1.42229.1.2.3.10.1.1 | NA | |||||||||||||||||||
| CtdcName | 1.3.6.1.4.1.42229.1.2.3.10.1.1.1 | CoriantTypesNameIdentifier | RO | ||||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current User-defined name assigned to identify a specific tdc in the device | |||||||||||||||||||||
| CtdcSupportingInputPort | 1.3.6.1.4.1.42229.1.2.3.10.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Identifier of the supporting input port. | |||||||||||||||||||||
| CtdcSupportingOutputPort | 1.3.6.1.4.1.42229.1.2.3.10.1.1.3 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Identifier of the supporting output port. | |||||||||||||||||||||
| CtdcAdminStatus | 1.3.6.1.4.1.42229.1.2.3.10.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CtdcOperStatus | 1.3.6.1.4.1.42229.1.2.3.10.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CtdcAvailStatus | 1.3.6.1.4.1.42229.1.2.3.10.1.1.6 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CtdcAliasName | 1.3.6.1.4.1.42229.1.2.3.10.1.1.7 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CtdcMode | 1.3.6.1.4.1.42229.1.2.3.10.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Control mode of the tunable dispersion compensation; Manual: CD value will be decided per configured CD value; Auto: system will automatically decide the CD value per measured chromatic dispersion in the span. default value :auto
| |||||||||||||||||||||
| CtdcReferenceFrequency | 1.3.6.1.4.1.42229.1.2.3.10.1.1.9 | CoriantTypesFreq | RO | ||||||||||||||||||
column · CoriantTypesFreq · read-only · current Indicating the reference wavelength of the TDC. UNITS:MHz | |||||||||||||||||||||
| CtdcActualReferenceFrequency | 1.3.6.1.4.1.42229.1.2.3.10.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Indicating the actual reference wavelength of the TDC. UNITS:MHz | |||||||||||||||||||||
| CtdcFrequencyRangeMin | 1.3.6.1.4.1.42229.1.2.3.10.1.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The minimum of supported wavelength. UNITS:MHz | |||||||||||||||||||||
| CtdcFrequencyRangeMax | 1.3.6.1.4.1.42229.1.2.3.10.1.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum of supported wavelength. UNITS:MHz | |||||||||||||||||||||
| CtdcChromaticDispersion | 1.3.6.1.4.1.42229.1.2.3.10.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The setting value of Chromatic Dispersion. UNITS:ps/nm default value :0 | |||||||||||||||||||||
| CtdcChromaticDispersionAdjustment | 1.3.6.1.4.1.42229.1.2.3.10.1.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The value will be used to adjust target chromatic dispersion by adding the value with auto decided dispersion in auto tdc mode. UNITS:ps/nm | |||||||||||||||||||||
| CtdcActualChromaticDispersion | 1.3.6.1.4.1.42229.1.2.3.10.1.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The actual value of Chromatic Dispersion. UNITS:ps/nm | |||||||||||||||||||||
| CtdcCdRangeMin | 1.3.6.1.4.1.42229.1.2.3.10.1.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The minimum of supported chromatic dispersion. UNITS:ps/nm | |||||||||||||||||||||
| CtdcCdRangeMax | 1.3.6.1.4.1.42229.1.2.3.10.1.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The maximum of supported chromatic dispersion. UNITS:ps/nm | |||||||||||||||||||||
| Ninventory | 1.3.6.1.4.1.42229.1.2.3.12 | ||||||||||||||||||||
| TinventoryTable | 1.3.6.1.4.1.42229.1.2.3.12.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RinventoryEntry | 1.3.6.1.4.1.42229.1.2.3.12.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of inventoryTable | |||||||||||||||||||||
| CinventoryEquipmentType | 1.3.6.1.4.1.42229.1.2.3.12.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The equipment type that the inventory data refers to
| |||||||||||||||||||||
| CinventoryShelfId | 1.3.6.1.4.1.42229.1.2.3.12.1.1.2 | CoriantTypesShelfId | RO | ||||||||||||||||||
column · CoriantTypesShelfId · read-only · current Identifier of the shelf. | |||||||||||||||||||||
| CinventorySlotId | 1.3.6.1.4.1.42229.1.2.3.12.1.1.3 | CoriantTypesSlotId | RO | ||||||||||||||||||
column · CoriantTypesSlotId · read-only · current Identifier of the slot. | |||||||||||||||||||||
| CinventorySubslotId | 1.3.6.1.4.1.42229.1.2.3.12.1.1.4 | CoriantTypesSlotId | RO | ||||||||||||||||||
column · CoriantTypesSlotId · read-only · current Identifier of the subslot. | |||||||||||||||||||||
| CinventoryPortId | 1.3.6.1.4.1.42229.1.2.3.12.1.1.5 | CoriantTypesPortId | RO | ||||||||||||||||||
column · CoriantTypesPortId · read-only · current Identifier of the port. | |||||||||||||||||||||
| CinventoryEquipmentVersion | 1.3.6.1.4.1.42229.1.2.3.12.1.1.6 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current The attribute Identifies the Hardware Version of the module that populates the slot. | |||||||||||||||||||||
| CinventoryModuleType | 1.3.6.1.4.1.42229.1.2.3.12.1.1.7 | OCTET STRING (SIZE (0..18)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..18)) · read-only · current This is the value of module type stored in EEPROM of the equipment. | |||||||||||||||||||||
| CinventoryVendor | 1.3.6.1.4.1.42229.1.2.3.12.1.1.8 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Vendor information. | |||||||||||||||||||||
| CinventorySerialNumber | 1.3.6.1.4.1.42229.1.2.3.12.1.1.9 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current This is the value of serial number stored in EEPROM of the equipment. | |||||||||||||||||||||
| CinventoryFwVersion | 1.3.6.1.4.1.42229.1.2.3.12.1.1.10 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current Current Firmware (FW) version on the equipment. | |||||||||||||||||||||
| CinventoryPartNumber | 1.3.6.1.4.1.42229.1.2.3.12.1.1.11 | OCTET STRING (SIZE (0..18)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..18)) · read-only · current Identifies the Part Number of the equipment. | |||||||||||||||||||||
| CinventoryClei | 1.3.6.1.4.1.42229.1.2.3.12.1.1.12 | OCTET STRING (SIZE (0..18)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..18)) · read-only · current Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages. CLEI codes have 4 data elements: - Characters 1 to 4: Define family or subfamily of product. - Characters 5 to 7: Define features. - Character 8: Manufacturer and System ID. - Characters 9 and 10: Identifies version, issue, and release #. | |||||||||||||||||||||
| CinventoryInterfaceType | 1.3.6.1.4.1.42229.1.2.3.12.1.1.13 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Indicating interface type of the pluggable. default value : | |||||||||||||||||||||
| CinventoryManufactureDate | 1.3.6.1.4.1.42229.1.2.3.12.1.1.14 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The equipment manufacture date get from equipment. format is mm/dd/yyyy. When there is no date information show nothing Conditions:(../equipment-type = 'shelf') or (../equipment-type = 'card') or (../equipment-type = 'subcard') or (../equipment-type = 'pluggable') default value : | |||||||||||||||||||||
| CinventoryManufacturerNumber | 1.3.6.1.4.1.42229.1.2.3.12.1.1.16 | OCTET STRING (SIZE (0..18)) | RO | magicserialnumber | |||||||||||||||||
column · OCTET STRING (SIZE (0..18)) · read-only · current This is the value of manufacturer number stored in EEPROM of the equipment. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nled | 1.3.6.1.4.1.42229.1.2.3.14 | ||||||||||||||||||||
| TledTable | 1.3.6.1.4.1.42229.1.2.3.14.1 | NA | |||||||||||||||||||
table · not-accessible · current Attributes related with LED Applicable to Shelf, FAN, PSU, CHM1, CHM2, CHM1G, OCC2 in DCI. | |||||||||||||||||||||
| RledEntry | 1.3.6.1.4.1.42229.1.2.3.14.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of ledTable | |||||||||||||||||||||
| CledEquipmentType | 1.3.6.1.4.1.42229.1.2.3.14.1.1.1 | OCTET STRING (SIZE (0..16)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..16)) · read-only · current The attribute indicates the equipment type to identify the module. for example, if the card is CHM1, 'CHM1' shall be used. DCI supporting LEDs: CHM1, CHM2, SHELF, FAN | |||||||||||||||||||||
| CledShelfId | 1.3.6.1.4.1.42229.1.2.3.14.1.1.2 | CoriantTypesShelfId | RO | ||||||||||||||||||
column · CoriantTypesShelfId · read-only · current Identifier of the shelf. | |||||||||||||||||||||
| CledSlotId | 1.3.6.1.4.1.42229.1.2.3.14.1.1.3 | CoriantTypesSlotId | RO | ||||||||||||||||||
column · CoriantTypesSlotId · read-only · current Identifier of the slot. | |||||||||||||||||||||
| CledName | 1.3.6.1.4.1.42229.1.2.3.14.1.1.4 | OCTET STRING (SIZE (0..16)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..16)) · read-only · current The functional name of LED. DCI NE: location_led port(n)_led (CHM1: n = 1 to 6, CHM2 n = 1 to 12, e.g. Port12) active_led power_led fault_led status_led subslot(n)_led | |||||||||||||||||||||
| CledStatus | 1.3.6.1.4.1.42229.1.2.3.14.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Current LED status. DCI NE: For Location_LED: OFF, BLINK For others: red, red-blink,green,green-blink,amber,amber-blink,off,notAvailable
| |||||||||||||||||||||
| CledSubslotId | 1.3.6.1.4.1.42229.1.2.3.14.1.1.6 | CoriantTypesSubslotId | RO | ||||||||||||||||||
column · CoriantTypesSubslotId · read-only · current Identifier of the subslot. | |||||||||||||||||||||
| NtemperatureDetails | 1.3.6.1.4.1.42229.1.2.3.15 | ||||||||||||||||||||
| TtemperatureDetailsTable | 1.3.6.1.4.1.42229.1.2.3.15.1 | NA | |||||||||||||||||||
table · not-accessible · current The detailed information of temperature in each monitoring-point of current module | |||||||||||||||||||||
| RtemperatureDetailsEntry | 1.3.6.1.4.1.42229.1.2.3.15.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of temperatureDetailsTable | |||||||||||||||||||||
| CtemperatureDetailsMonitoringPoint | 1.3.6.1.4.1.42229.1.2.3.15.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The point of temperature monitoring. It could be the sensor or chip internal. | |||||||||||||||||||||
| CtemperatureDetailsTemperature | 1.3.6.1.4.1.42229.1.2.3.15.1.1.2 | CoriantTypesTemperature | RO | ||||||||||||||||||
column · CoriantTypesTemperature · read-only · current Temperature at the monitoring point. | |||||||||||||||||||||
| CtemperatureDetailsTemperatureRangeLow | 1.3.6.1.4.1.42229.1.2.3.15.1.1.3 | CoriantTypesTemperature | RO | ||||||||||||||||||
column · CoriantTypesTemperature · read-only · current The lowest temperature threshold of this monitoring point in working mode. | |||||||||||||||||||||
| CtemperatureDetailsTemperatureRangeHigh | 1.3.6.1.4.1.42229.1.2.3.15.1.1.4 | CoriantTypesTemperature | RO | ||||||||||||||||||
column · CoriantTypesTemperature · read-only · current The highest temperature threshold of this monitoring point in working mode. | |||||||||||||||||||||
| Notdr | 1.3.6.1.4.1.42229.1.2.3.16 | ||||||||||||||||||||
| TotdrTable | 1.3.6.1.4.1.42229.1.2.3.16.1 | NA | |||||||||||||||||||
table · not-accessible · current Container of OTDR. | |||||||||||||||||||||
| RotdrEntry | 1.3.6.1.4.1.42229.1.2.3.16.1.1 | NA | |||||||||||||||||||
| CotdrState | 1.3.6.1.4.1.42229.1.2.3.16.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating the current status of the OTDR. default value :not-available
| |||||||||||||||||||||
| CotdrMeasurementTime | 1.3.6.1.4.1.42229.1.2.3.16.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Indicating the time remaining in current measurement running. UNITS:second default value :0 | |||||||||||||||||||||
| CotdrError | 1.3.6.1.4.1.42229.1.2.3.16.1.1.3 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Error message produced when the measurement ends with error. | |||||||||||||||||||||
| CotdrLaserStatus | 1.3.6.1.4.1.42229.1.2.3.16.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating the current status of the OTDR laser. default value :not-available
| |||||||||||||||||||||
| CotdrMeasurementPort | 1.3.6.1.4.1.42229.1.2.3.16.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current 0 indicates that the card is not measuring any port; non-zero indicates the OTDR port number where a measurement is currently taking place. default value :0 | |||||||||||||||||||||
| NotdrPort | 1.3.6.1.4.1.42229.1.2.3.18 | ||||||||||||||||||||
| TotdrPortTable | 1.3.6.1.4.1.42229.1.2.3.18.1 | NA | |||||||||||||||||||
table · not-accessible · current Containing attributes of OTDR port. | |||||||||||||||||||||
| RotdrPortEntry | 1.3.6.1.4.1.42229.1.2.3.18.1.1 | NA | |||||||||||||||||||
| CotdrPortOtdrRange | 1.3.6.1.4.1.42229.1.2.3.18.1.1.1 | OtdrOtdrRange | RO | ||||||||||||||||||
column · OtdrOtdrRange · read-only · current OTDR measurement range. UNITS:km default value :auto | |||||||||||||||||||||
| CotdrPortOtdrPulseWidth | 1.3.6.1.4.1.42229.1.2.3.18.1.1.2 | OtdrOtdrPulseWidth | RO | ||||||||||||||||||
column · OtdrOtdrPulseWidth · read-only · current Indicates pulse width to be used in otdr measurement. UNITS:nano-second default value :auto | |||||||||||||||||||||
| CotdrPortOtdrMeasurementSpeed | 1.3.6.1.4.1.42229.1.2.3.18.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating OTDR measurement speed. default value :auto
| |||||||||||||||||||||
| CotdrPortOtdrIor | 1.3.6.1.4.1.42229.1.2.3.18.1.1.4 | OtdrOtdrIor | RO | ||||||||||||||||||
column · OtdrOtdrIor · read-only · current Specifies the group index of refraction (IOR) of the fiber to be measured. default value :auto | |||||||||||||||||||||
| CotdrPortOtdrFiberType | 1.3.6.1.4.1.42229.1.2.3.18.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating fiber type to be measured. default value :auto
| |||||||||||||||||||||
| CotdrPortOtdrLastMeasurement | 1.3.6.1.4.1.42229.1.2.3.18.1.1.6 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current Indicates the last otdr measurement date and time on the port. default value :0000-00-00T00:00:00Z | |||||||||||||||||||||
| CotdrPortOtdrResolution | 1.3.6.1.4.1.42229.1.2.3.18.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Specifies the OTDR data sampling resolution. UNITS:meter default value :auto | |||||||||||||||||||||
| Nops | 1.3.6.1.4.1.42229.1.2.3.20 | ||||||||||||||||||||
| TopsTable | 1.3.6.1.4.1.42229.1.2.3.20.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of optical protection switch (ops) on an equipment. | |||||||||||||||||||||
| RopsEntry | 1.3.6.1.4.1.42229.1.2.3.20.1.1 | NA | |||||||||||||||||||
| CopsName | 1.3.6.1.4.1.42229.1.2.3.20.1.1.1 | CoriantTypesNameIdentifier | RO | ||||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current The name assigned to identify a specific ops in the device | |||||||||||||||||||||
| CopsWorkingEntity | 1.3.6.1.4.1.42229.1.2.3.20.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Identifier of the working port of the OPS. | |||||||||||||||||||||
| CopsProtectionEntity | 1.3.6.1.4.1.42229.1.2.3.20.1.1.3 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Identifier of the protection port of the OPS | |||||||||||||||||||||
| CopsAdminStatus | 1.3.6.1.4.1.42229.1.2.3.20.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CopsOperStatus | 1.3.6.1.4.1.42229.1.2.3.20.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CopsAvailStatus | 1.3.6.1.4.1.42229.1.2.3.20.1.1.6 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CopsAliasName | 1.3.6.1.4.1.42229.1.2.3.20.1.1.7 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CopsProtectionStatus | 1.3.6.1.4.1.42229.1.2.3.20.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the status of the protection switch.
| |||||||||||||||||||||
| CopsActivePath | 1.3.6.1.4.1.42229.1.2.3.20.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating the active port of the protection switch. default value :unknown
| |||||||||||||||||||||
| CopsRevertive | 1.3.6.1.4.1.42229.1.2.3.20.1.1.10 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Revertive behavior of the aps. If True, then automatically revert after protection switch once the fault is restored. default value :no | |||||||||||||||||||||
| CopsWaitToRestore | 1.3.6.1.4.1.42229.1.2.3.20.1.1.11 | Unsigned32 (0..3600) | RO | ||||||||||||||||||
column · Unsigned32 (0..3600) · read-only · current Wait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately, after expiration of the timer, the working is restored and a norequest state is transmitted. UNITS:second default value :300 | |||||||||||||||||||||
| CopsWorkingSwitchThreshold | 1.3.6.1.4.1.42229.1.2.3.20.1.1.12 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current The switching threshold of the working port which indicates the optical power threshold of signal degrade. default value :-18.0 | |||||||||||||||||||||
| CopsProtectionSwitchThreshold | 1.3.6.1.4.1.42229.1.2.3.20.1.1.13 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current The switching threshold of the protection port which indicates the optical power threshold of signal degrade. default value :-18.0 | |||||||||||||||||||||
| CopsWorkingLosThreshold | 1.3.6.1.4.1.42229.1.2.3.20.1.1.14 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current The switching threshold of the working port, power level below it will lead to loss of signal. default value :-23.0 | |||||||||||||||||||||
| CopsProtectionLosThreshold | 1.3.6.1.4.1.42229.1.2.3.20.1.1.15 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current The switching threshold of the protection port, power level below it will lead to loss of signal. default value :-23.0 | |||||||||||||||||||||
| CopsHoldoffTimer | 1.3.6.1.4.1.42229.1.2.3.20.1.1.16 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of the protection switch. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| CopsWavelengthBand | 1.3.6.1.4.1.42229.1.2.3.20.1.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies the band of the signal going through the optical protection switch unit. UNITS:nm default value :1550
| |||||||||||||||||||||
| NsubportStatistics | 1.3.6.1.4.1.42229.1.2.3.25 | ||||||||||||||||||||
| TsubportStatisticsTable | 1.3.6.1.4.1.42229.1.2.3.25.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RsubportStatisticsEntry | 1.3.6.1.4.1.42229.1.2.3.25.1.1 | NA | |||||||||||||||||||
| CsubportStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.3.25.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| NportStatistics | 1.3.6.1.4.1.42229.1.2.3.26 | ||||||||||||||||||||
| TportStatisticsTable | 1.3.6.1.4.1.42229.1.2.3.26.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RportStatisticsEntry | 1.3.6.1.4.1.42229.1.2.3.26.1.1 | NA | |||||||||||||||||||
| CportStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.3.26.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| NsubcardStatistics | 1.3.6.1.4.1.42229.1.2.3.27 | ||||||||||||||||||||
| TsubcardStatisticsTable | 1.3.6.1.4.1.42229.1.2.3.27.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RsubcardStatisticsEntry | 1.3.6.1.4.1.42229.1.2.3.27.1.1 | NA | |||||||||||||||||||
| CsubcardStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.3.27.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| NcardStatistics | 1.3.6.1.4.1.42229.1.2.3.28 | ||||||||||||||||||||
| TcardStatisticsTable | 1.3.6.1.4.1.42229.1.2.3.28.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RcardStatisticsEntry | 1.3.6.1.4.1.42229.1.2.3.28.1.1 | NA | |||||||||||||||||||
| CcardStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.3.28.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| NshelfStatistics | 1.3.6.1.4.1.42229.1.2.3.29 | ||||||||||||||||||||
| TshelfStatisticsTable | 1.3.6.1.4.1.42229.1.2.3.29.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RshelfStatisticsEntry | 1.3.6.1.4.1.42229.1.2.3.29.1.1 | NA | |||||||||||||||||||
| CshelfStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.3.29.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Nservices | 1.3.6.1.4.1.42229.1.2.4 | ||||||||||||||||||||
| Notn | 1.3.6.1.4.1.42229.1.2.4.1 | ||||||||||||||||||||
| Neth10g | 1.3.6.1.4.1.42229.1.2.4.1.1 | ||||||||||||||||||||
| Teth10gTable | 1.3.6.1.4.1.42229.1.2.4.1.1.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the 10GBE object. | |||||||||||||||||||||
| Reth10gEntry | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1 | NA | |||||||||||||||||||
| Ceth10gEthFecType | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.1 | CoriantTypesEthFec | RO | ||||||||||||||||||
column · CoriantTypesEthFec · read-only · current The FEC working type of etyn port. default value :auto | |||||||||||||||||||||
| Ceth10gEthFecTypeState | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.2 | CoriantTypesEthFec | RO | ||||||||||||||||||
column · CoriantTypesEthFec · read-only · current The FEC working state of etyn port. default value :disabled | |||||||||||||||||||||
| Ceth10gTransmitInterpacketgap | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.3 | Unsigned32 (8..12) | RO | ||||||||||||||||||
column · Unsigned32 (8..12) · read-only · current Specifies the minimum transmit IPG value. default value :8 | |||||||||||||||||||||
| Ceth10gGfpPayloadFcs | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.4 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled | |||||||||||||||||||||
| Ceth10gMappingMode | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
| |||||||||||||||||||||
| Ceth10gAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Ceth10gOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Ceth10gAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.8 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Ceth10gAliasName | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.9 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Ceth10gClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.10 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Ceth10gClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.11 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Ceth10gNearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.12 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Ceth10gAlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.13 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Ceth10gLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.14 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Ceth10gLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Ceth10gTestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.16 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| Ceth10gTestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.17 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| Ceth10gServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.18 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Ceth10gLldpStatusIf | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
| |||||||||||||||||||||
| Ceth10gUpiValue | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The value of ODU2 upi in PREAMBLE mapping mode. default value :not-applicable
| |||||||||||||||||||||
| Ceth10gHoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.21 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| NtestSignalFacilityStatus | 1.3.6.1.4.1.42229.1.2.4.1.2 | ||||||||||||||||||||
| TtestSignalFacilityStatusTable | 1.3.6.1.4.1.42229.1.2.4.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current Test signal status for current facility. | |||||||||||||||||||||
| RtestSignalFacilityStatusEntry | 1.3.6.1.4.1.42229.1.2.4.1.2.1.1 | NA | |||||||||||||||||||
| CtestSignalFacilityStatusPrbsSync | 1.3.6.1.4.1.42229.1.2.4.1.2.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The test result of PRBS Synchronization default value :not-applicable
| |||||||||||||||||||||
| CtestSignalFacilityStatusTestTimeDuration | 1.3.6.1.4.1.42229.1.2.4.1.2.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The time duration of signal test UNITS:seconds | |||||||||||||||||||||
| CtestSignalFacilityStatusPrbsBitErrorCount | 1.3.6.1.4.1.42229.1.2.4.1.2.1.1.3 | IetfYangTypesGauge64 | RO | ||||||||||||||||||
column · IetfYangTypesGauge64 · read-only · current The counting of bit error by PRBS Synchronization | |||||||||||||||||||||
| NlldpRemoteSystem | 1.3.6.1.4.1.42229.1.2.4.1.3 | ||||||||||||||||||||
| TlldpRemoteSystemTable | 1.3.6.1.4.1.42229.1.2.4.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current List of LLDP neighbors. | |||||||||||||||||||||
| RlldpRemoteSystemEntry | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1 | NA | |||||||||||||||||||
| ClldpRemoteSystemLldpRemoteIndex | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This attribute represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. | |||||||||||||||||||||
| ClldpRemoteSystemRemoteChassisIdSubtype | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This attribute describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value.
| |||||||||||||||||||||
| ClldpRemoteSystemRemoteChassisId | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.3 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current This attribute describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instance. If the associated LldpChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated LldpChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated LldpChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated LldpChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated LldpChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID. | |||||||||||||||||||||
| ClldpRemoteSystemRemotePortIdSubtype | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
| |||||||||||||||||||||
| ClldpRemoteSystemRemotePortId | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.5 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID. | |||||||||||||||||||||
| ClldpRemoteSystemRemotePortDesc | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.6 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The string value used to identify the description of the given port associated with the remote system. | |||||||||||||||||||||
| ClldpRemoteSystemRemoteSysName | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.7 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The string value used to identify the system name of the remote system. sys-name: system name | |||||||||||||||||||||
| ClldpRemoteSystemRemoteSysDesc | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.8 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The string value used to identify the system description of the remote system. sys-desc: system description | |||||||||||||||||||||
| ClldpRemoteSystemRemoteSysCapSupported | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.9 | LldpLldpSysCap | RO | ||||||||||||||||||
column · LldpLldpSysCap · read-only · current This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality. sys-cap-supported: supported system capability | |||||||||||||||||||||
| ClldpRemoteSystemRemoteSysCapEnabled | 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10 | LldpLldpSysCap | RO | ||||||||||||||||||
column · LldpLldpSysCap · read-only · current This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality. | |||||||||||||||||||||
| NremoteManAddresses | 1.3.6.1.4.1.42229.1.2.4.1.4 | ||||||||||||||||||||
| TremoteManAddressesTable | 1.3.6.1.4.1.42229.1.2.4.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current List of management addresses of LLDP neighbor. man:managment, remote management addresses | |||||||||||||||||||||
| RremoteManAddressesEntry | 1.3.6.1.4.1.42229.1.2.4.1.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of remoteManAddressesTable | |||||||||||||||||||||
| CremoteManAddressesRemoteManAddrSubtype | 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object. | |||||||||||||||||||||
| CremoteManAddressesRemoteManAddr | 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.2 | OCTET STRING (SIZE (0..62)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..62)) · read-only · current The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity. man: management addr: address | |||||||||||||||||||||
| CremoteManAddressesRemoteManAddrIfSubtype | 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This attribute describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' represents interface identifier based on the ifIndex MIB object. The enumeration 'systemPortNumber(3)' represents interface identifier based on the system port numbering convention. man: management addr: address | |||||||||||||||||||||
| CremoteManAddressesRemoteManAddrIfId | 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The integer value used to identify the interface number regarding the management address component associated with the remote system. man: management addr: address | |||||||||||||||||||||
| CremoteManAddressesRemoteManAddrOid | 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.5 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. man: management addr: address oid: object identifier | |||||||||||||||||||||
| Nodu | 1.3.6.1.4.1.42229.1.2.4.1.5 | ||||||||||||||||||||
| ToduTable | 1.3.6.1.4.1.42229.1.2.4.1.5.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RoduEntry | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1 | NA | |||||||||||||||||||
| CodutypeL1 | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.1 | CoriantTypesOduType | RO | ||||||||||||||||||
column · CoriantTypesOduType · read-only · current Level 1 ODU type | |||||||||||||||||||||
| CoduidL1 | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Identifier of level 1 ODU | |||||||||||||||||||||
| CodutypeL2 | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.3 | CoriantTypesOduType | RO | ||||||||||||||||||
column · CoriantTypesOduType · read-only · current Level 2 ODU type | |||||||||||||||||||||
| CoduidL2 | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Identifier of level 2 ODU | |||||||||||||||||||||
| CodutypeL3 | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.5 | CoriantTypesOduType | RO | ||||||||||||||||||
column · CoriantTypesOduType · read-only · current Level 3 ODU type | |||||||||||||||||||||
| CoduidL3 | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Identifier of level 3 ODU | |||||||||||||||||||||
| CodutypeL4 | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.7 | CoriantTypesOduType | RO | ||||||||||||||||||
column · CoriantTypesOduType · read-only · current Level 4 ODU type | |||||||||||||||||||||
| CoduidL4 | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Identifier of level 4 ODU | |||||||||||||||||||||
| CoduAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CoduOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CoduAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.11 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CoduAliasName | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.12 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CoduServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.13 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| CoduTribSlot | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.14 | CoriantTypesNumberList | RO | ||||||||||||||||||
column · CoriantTypesNumberList · read-only · current Tributary slots of ODU, range 1 to 80 | |||||||||||||||||||||
| CoduRxPayloadType | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.15 | OCTET STRING (SIZE (0 | 4)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0 | 4)) · read-only · current Received payload-type of ODU | |||||||||||||||||||||
| CoduTxPayloadType | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.16 | OCTET STRING (SIZE (0 | 4)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0 | 4)) · read-only · current Transmitter payload-type of ODU | |||||||||||||||||||||
| CoduNimEnable | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.17 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of nim function default value :enabled | |||||||||||||||||||||
| CoduDelayMeasurementEnable | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.18 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of delay-measurement function default value :disabled | |||||||||||||||||||||
| CoduOpuConfigActual | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The actual opu configuration type default value :not-applicable
| |||||||||||||||||||||
| CoduClientSignalType | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The ODUflex rate for special signal type default value :not-applicable
| |||||||||||||||||||||
| CoduExpSapi | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.21 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected sapi(Source Access Point Identifier) | |||||||||||||||||||||
| CoduExpDapi | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.22 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| CoduExpOperator | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.23 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The expected operator TTI | |||||||||||||||||||||
| CoduTxSapi | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.24 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter sapi(Source Access Point Identifier) | |||||||||||||||||||||
| CoduTxDapi | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.25 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| CoduTxOperator | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.26 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The transmitter operator TTI | |||||||||||||||||||||
| CoduTimDefectMode | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.27 | CoriantTypesTimMode | RO | ||||||||||||||||||
column · CoriantTypesTimMode · read-only · current The tim defect selection mode default value :NONE | |||||||||||||||||||||
| CoduTimAct | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.28 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| CoduRxSapi | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.29 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received sapi(Source Access Point Identifier) | |||||||||||||||||||||
| CoduRxDapi | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.30 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| CoduRxOperator | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.31 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The received operator TTI | |||||||||||||||||||||
| CoduDegradeInterval | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.32 | Unsigned32 (2..10) | RO | ||||||||||||||||||
column · Unsigned32 (2..10) · read-only · current The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7 | |||||||||||||||||||||
| CoduDegradeThreshold | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.33 | Unsigned32 (1..2590845) | RO | ||||||||||||||||||
column · Unsigned32 (1..2590845) · read-only · current The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 | |||||||||||||||||||||
| CoduTestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.34 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| CoduTestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.35 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| CoduTerminationMode | 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.36 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Termination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation default value :terminated
| |||||||||||||||||||||
| NoduEncryption | 1.3.6.1.4.1.42229.1.2.4.1.6 | ||||||||||||||||||||
| ToduEncryptionTable | 1.3.6.1.4.1.42229.1.2.4.1.6.1 | NA | |||||||||||||||||||
table · not-accessible · current Encryption function for the ODU channel. | |||||||||||||||||||||
| RoduEncryptionEntry | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1 | NA | |||||||||||||||||||
| CoduEncryptionEncryptionEnable | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Setting AES-256 encryption on OTN default value :disabled
| |||||||||||||||||||||
| CoduEncryptionBlockCipherMode | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies the block cipher mode of operation. default value :CTR
| |||||||||||||||||||||
| CoduEncryptionEncryptionInterval | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.3 | Unsigned32 (10..1440) | RO | ||||||||||||||||||
column · Unsigned32 (10..1440) · read-only · current The encryption key rotation interval (in minutes) UNITS:minutes default value :30 | |||||||||||||||||||||
| CoduEncryptionEncryptionTxStatus | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.4 | CoriantCommonOtnEncryStatusEnum | RO | ||||||||||||||||||
column · CoriantCommonOtnEncryStatusEnum · read-only · current The encryption status at transmit side of the ODU, which reflects the status of both encryption data and communication sessions. | |||||||||||||||||||||
| CoduEncryptionEncryptionRxStatus | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.5 | CoriantCommonOtnEncryStatusEnum | RO | ||||||||||||||||||
column · CoriantCommonOtnEncryStatusEnum · read-only · current The encryption status at receive side of the ODU, which reflects the status of both encryption data and communication sessions. | |||||||||||||||||||||
| CoduEncryptionOduKeySyncSession | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.6 | CoriantCommonOtnKeySyncSession | RO | ||||||||||||||||||
column · CoriantCommonOtnKeySyncSession · read-only · current Indicate the associated session for the ODU channel to synchronize keys. default value :none | |||||||||||||||||||||
| CoduEncryptionEncryptionTxChannelId | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.7 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current Specify channel identifier of the encrypted ODU, which shall be unique within the NE. | |||||||||||||||||||||
| CoduEncryptionTimeToNextKey | 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The time left to rotate the ODU encryption key. UNITS:seconds default value :0 | |||||||||||||||||||||
| NtestSignalStatus | 1.3.6.1.4.1.42229.1.2.4.1.7 | ||||||||||||||||||||
| TtestSignalStatusTable | 1.3.6.1.4.1.42229.1.2.4.1.7.1 | NA | |||||||||||||||||||
table · not-accessible · current Test signal status on ODU | |||||||||||||||||||||
| RtestSignalStatusEntry | 1.3.6.1.4.1.42229.1.2.4.1.7.1.1 | NA | |||||||||||||||||||
| CtestSignalStatusPrbsSync | 1.3.6.1.4.1.42229.1.2.4.1.7.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The test result of PRBS Synchronization default value :not-applicable
| |||||||||||||||||||||
| CtestSignalStatusTestTimeDuration | 1.3.6.1.4.1.42229.1.2.4.1.7.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The time duration of signal test UNITS:seconds | |||||||||||||||||||||
| CtestSignalStatusPrbsBitErrorCount | 1.3.6.1.4.1.42229.1.2.4.1.7.1.1.3 | IetfYangTypesGauge64 | RO | ||||||||||||||||||
column · IetfYangTypesGauge64 · read-only · current The counting of bit error by PRBS Synchronization | |||||||||||||||||||||
| Neth40g | 1.3.6.1.4.1.42229.1.2.4.1.8 | ||||||||||||||||||||
| Teth40gTable | 1.3.6.1.4.1.42229.1.2.4.1.8.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the 40GBE object. | |||||||||||||||||||||
| Reth40gEntry | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1 | NA | |||||||||||||||||||
| Ceth40gEthFecType | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.1 | CoriantTypesEthFec | RO | ||||||||||||||||||
column · CoriantTypesEthFec · read-only · current The FEC working type of etyn port. default value :auto | |||||||||||||||||||||
| Ceth40gEthFecTypeState | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.2 | CoriantTypesEthFec | RO | ||||||||||||||||||
column · CoriantTypesEthFec · read-only · current The FEC working state of etyn port. default value :disabled | |||||||||||||||||||||
| Ceth40gTransmitInterpacketgap | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.3 | Unsigned32 (8..12) | RO | ||||||||||||||||||
column · Unsigned32 (8..12) · read-only · current Specifies the minimum transmit IPG value. default value :8 | |||||||||||||||||||||
| Ceth40gGfpPayloadFcs | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.4 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled | |||||||||||||||||||||
| Ceth40gMappingMode | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
| |||||||||||||||||||||
| Ceth40gAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Ceth40gOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Ceth40gAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.8 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Ceth40gAliasName | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.9 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Ceth40gClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.10 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Ceth40gClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.11 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Ceth40gNearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.12 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Ceth40gAlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.13 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Ceth40gLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.14 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Ceth40gLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Ceth40gTestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.16 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| Ceth40gTestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.17 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| Ceth40gServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.18 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Ceth40gLldpStatusIf | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
| |||||||||||||||||||||
| Ceth40gHoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.20 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| Neth100g | 1.3.6.1.4.1.42229.1.2.4.1.9 | ||||||||||||||||||||
| Teth100gTable | 1.3.6.1.4.1.42229.1.2.4.1.9.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the 100GBE object. | |||||||||||||||||||||
| Reth100gEntry | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1 | NA | |||||||||||||||||||
| Ceth100gEthFecType | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.1 | CoriantTypesEthFec | RO | 1 | |||||||||||||||||
column · CoriantTypesEthFec · read-only · current The FEC working type of etyn port. default value :auto Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gEthFecTypeState | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.2 | CoriantTypesEthFec | RO | 1 | |||||||||||||||||
column · CoriantTypesEthFec · read-only · current The FEC working state of etyn port. default value :disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gTransmitInterpacketgap | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.3 | Unsigned32 (8..12) | RO | 8 | |||||||||||||||||
column · Unsigned32 (8..12) · read-only · current Specifies the minimum transmit IPG value. default value :8 Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gGfpPayloadFcs | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.4 | CoriantTypesEnableSwitch | RO | 2 | |||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gMappingMode | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.5 | INTEGER | RO | gmp(1) | |||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.6 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.7 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.8 | Bits | RO | 00 00 00 00 | |||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gAliasName | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.9 | OCTET STRING (SIZE (0..256)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.10 | CoriantTypesYesNo | RO | 2 | |||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.11 | Unsigned32 (0..1000) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gNearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.12 | CoriantTypesYesNo | RO | 2 | |||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gAlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.13 | CoriantTypesEnableSwitch | RO | 2 | |||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.14 | CoriantTypesEnableSwitch | RO | 2 | |||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.15 | INTEGER | RO | none(0) | |||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gTestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.16 | CoriantTypesTestSignalType | RO | 0 | |||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gTestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.17 | CoriantTypesTestSignalConfig | RO | 0 | |||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.18 | OCTET STRING (SIZE (0..128)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gLldpStatusIf | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.19 | INTEGER | RO | disabled(4) | |||||||||||||||||
column · INTEGER · read-only · current Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gHoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.20 | CoriantTypesYesNo | RO | 2 | |||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no Example values from LibreNMS test devices
| |||||||||||||||||||||
| Notu4 | 1.3.6.1.4.1.42229.1.2.4.1.10 | ||||||||||||||||||||
| Totu4Table | 1.3.6.1.4.1.42229.1.2.4.1.10.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the otu4 object | |||||||||||||||||||||
| Rotu4Entry | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1 | NA | |||||||||||||||||||
| Cotu4FecType | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.1 | CoriantTypesOtukFec | RO | ||||||||||||||||||
column · CoriantTypesOtukFec · read-only · current The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 | |||||||||||||||||||||
| Cotu4AdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cotu4OperStatus | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cotu4AvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cotu4AliasName | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cotu4ServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.6 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cotu4ExpSapi | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.7 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu4ExpDapi | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.8 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu4ExpOperator | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.9 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The expected operator TTI | |||||||||||||||||||||
| Cotu4TxSapi | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.10 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu4TxDapi | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.11 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu4TxOperator | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.12 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The transmitter operator TTI | |||||||||||||||||||||
| Cotu4TimDefectMode | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.13 | CoriantTypesTimMode | RO | ||||||||||||||||||
column · CoriantTypesTimMode · read-only · current The tim defect selection mode default value :NONE | |||||||||||||||||||||
| Cotu4TimAct | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.14 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Cotu4RxSapi | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.15 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu4RxDapi | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu4RxOperator | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.17 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The received operator TTI | |||||||||||||||||||||
| Cotu4DegradeInterval | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.18 | Unsigned32 (2..10) | RO | ||||||||||||||||||
column · Unsigned32 (2..10) · read-only · current The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7 | |||||||||||||||||||||
| Cotu4DegradeThreshold | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.19 | Unsigned32 (1..2590845) | RO | ||||||||||||||||||
column · Unsigned32 (1..2590845) · read-only · current The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 | |||||||||||||||||||||
| Cotu4LoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.20 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Cotu4LoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Cotu4ClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.22 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Cotu4ClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.23 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Cotu4HoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.24 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| Cotu4NearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.25 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Cotu4AlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.26 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Notu2 | 1.3.6.1.4.1.42229.1.2.4.1.11 | ||||||||||||||||||||
| Totu2Table | 1.3.6.1.4.1.42229.1.2.4.1.11.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the otu2 object | |||||||||||||||||||||
| Rotu2Entry | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1 | NA | |||||||||||||||||||
| Cotu2FecType | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.1 | CoriantTypesOtukFec | RO | ||||||||||||||||||
column · CoriantTypesOtukFec · read-only · current The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 | |||||||||||||||||||||
| Cotu2AdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cotu2OperStatus | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cotu2AvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cotu2AliasName | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cotu2ServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.6 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cotu2ExpSapi | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.7 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu2ExpDapi | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.8 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu2ExpOperator | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.9 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The expected operator TTI | |||||||||||||||||||||
| Cotu2TxSapi | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.10 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu2TxDapi | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.11 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu2TxOperator | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.12 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The transmitter operator TTI | |||||||||||||||||||||
| Cotu2TimDefectMode | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.13 | CoriantTypesTimMode | RO | ||||||||||||||||||
column · CoriantTypesTimMode · read-only · current The tim defect selection mode default value :NONE | |||||||||||||||||||||
| Cotu2TimAct | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.14 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Cotu2RxSapi | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.15 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu2RxDapi | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu2RxOperator | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.17 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The received operator TTI | |||||||||||||||||||||
| Cotu2DegradeInterval | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.18 | Unsigned32 (2..10) | RO | ||||||||||||||||||
column · Unsigned32 (2..10) · read-only · current The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7 | |||||||||||||||||||||
| Cotu2DegradeThreshold | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.19 | Unsigned32 (1..2590845) | RO | ||||||||||||||||||
column · Unsigned32 (1..2590845) · read-only · current The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 | |||||||||||||||||||||
| Cotu2LoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.20 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Cotu2LoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Notu2e | 1.3.6.1.4.1.42229.1.2.4.1.12 | ||||||||||||||||||||
| Totu2eTable | 1.3.6.1.4.1.42229.1.2.4.1.12.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the otu2e object | |||||||||||||||||||||
| Rotu2eEntry | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1 | NA | |||||||||||||||||||
| Cotu2eFecType | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.1 | CoriantTypesOtukFec | RO | ||||||||||||||||||
column · CoriantTypesOtukFec · read-only · current The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 | |||||||||||||||||||||
| Cotu2eAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cotu2eOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cotu2eAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cotu2eAliasName | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cotu2eServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.6 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cotu2eExpSapi | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.7 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu2eExpDapi | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.8 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu2eExpOperator | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.9 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The expected operator TTI | |||||||||||||||||||||
| Cotu2eTxSapi | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.10 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu2eTxDapi | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.11 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu2eTxOperator | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.12 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The transmitter operator TTI | |||||||||||||||||||||
| Cotu2eTimDefectMode | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.13 | CoriantTypesTimMode | RO | ||||||||||||||||||
column · CoriantTypesTimMode · read-only · current The tim defect selection mode default value :NONE | |||||||||||||||||||||
| Cotu2eTimAct | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.14 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Cotu2eRxSapi | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.15 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotu2eRxDapi | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotu2eRxOperator | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.17 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The received operator TTI | |||||||||||||||||||||
| Cotu2eDegradeInterval | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.18 | Unsigned32 (2..10) | RO | ||||||||||||||||||
column · Unsigned32 (2..10) · read-only · current The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7 | |||||||||||||||||||||
| Cotu2eDegradeThreshold | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.19 | Unsigned32 (1..2590845) | RO | ||||||||||||||||||
column · Unsigned32 (1..2590845) · read-only · current The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 | |||||||||||||||||||||
| Cotu2eLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.20 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Cotu2eLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Nfc8g | 1.3.6.1.4.1.42229.1.2.4.1.13 | ||||||||||||||||||||
| Tfc8gTable | 1.3.6.1.4.1.42229.1.2.4.1.13.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the FC8G object. | |||||||||||||||||||||
| Rfc8gEntry | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1 | NA | |||||||||||||||||||
| Cfc8gMappingMode | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
| |||||||||||||||||||||
| Cfc8gAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cfc8gOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cfc8gAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cfc8gAliasName | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cfc8gClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.6 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Cfc8gClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.7 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Cfc8gNearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.8 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Cfc8gAlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.9 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Cfc8gLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.10 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Cfc8gLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Cfc8gTestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.12 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| Cfc8gTestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.13 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| Cfc8gServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.14 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cfc8gHoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.15 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| Nfc16g | 1.3.6.1.4.1.42229.1.2.4.1.14 | ||||||||||||||||||||
| Tfc16gTable | 1.3.6.1.4.1.42229.1.2.4.1.14.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the FC16G object. | |||||||||||||||||||||
| Rfc16gEntry | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1 | NA | |||||||||||||||||||
| Cfc16gMappingMode | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
| |||||||||||||||||||||
| Cfc16gAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cfc16gOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cfc16gAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cfc16gAliasName | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cfc16gClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.6 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Cfc16gClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.7 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Cfc16gNearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.8 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Cfc16gAlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.9 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Cfc16gLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.10 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Cfc16gLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Cfc16gTestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.12 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| Cfc16gTestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.13 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| Cfc16gServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.14 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cfc16gHoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.15 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| Noc192 | 1.3.6.1.4.1.42229.1.2.4.1.15 | ||||||||||||||||||||
| Toc192Table | 1.3.6.1.4.1.42229.1.2.4.1.15.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the OC192 object. | |||||||||||||||||||||
| Roc192Entry | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1 | NA | |||||||||||||||||||
| Coc192MappingMode | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
| |||||||||||||||||||||
| Coc192AdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Coc192OperStatus | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Coc192AvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Coc192AliasName | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Coc192ClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.6 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Coc192ClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.7 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Coc192NearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.8 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Coc192AlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.9 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Coc192LoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.10 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Coc192LoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Coc192TestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.12 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| Coc192TestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.13 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| Coc192ServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.14 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Coc192ExpTrc | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.15 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected trc(trail trace identification) | |||||||||||||||||||||
| Coc192TxTrc | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm' | |||||||||||||||||||||
| Coc192RxTrc | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.17 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received trc(trail trace identification) | |||||||||||||||||||||
| Coc192TimAct | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.18 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Coc192TimMonitor | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.19 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of tim defect monitor mode default value :disabled | |||||||||||||||||||||
| Coc192AisType | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current NULL default value :Generic-AIS
| |||||||||||||||||||||
| Coc192HoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.21 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| Nstm64 | 1.3.6.1.4.1.42229.1.2.4.1.16 | ||||||||||||||||||||
| Tstm64Table | 1.3.6.1.4.1.42229.1.2.4.1.16.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the STM64 object. | |||||||||||||||||||||
| Rstm64Entry | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1 | NA | |||||||||||||||||||
| Cstm64MappingMode | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
| |||||||||||||||||||||
| Cstm64AdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cstm64OperStatus | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cstm64AvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cstm64AliasName | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cstm64ClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.6 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Cstm64ClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.7 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Cstm64NearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.8 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Cstm64AlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.9 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Cstm64LoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.10 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Cstm64LoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Cstm64TestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.12 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| Cstm64TestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.13 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| Cstm64ServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.14 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cstm64ExpTrc | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.15 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected trc(trail trace identification) | |||||||||||||||||||||
| Cstm64TxTrc | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm' | |||||||||||||||||||||
| Cstm64RxTrc | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.17 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received trc(trail trace identification) | |||||||||||||||||||||
| Cstm64TimAct | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.18 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Cstm64TimMonitor | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.19 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of tim defect monitor mode default value :disabled | |||||||||||||||||||||
| Cstm64AisType | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current NULL default value :Generic-AIS
| |||||||||||||||||||||
| Cstm64HoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.21 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| Notuc2 | 1.3.6.1.4.1.42229.1.2.4.1.17 | ||||||||||||||||||||
| Totuc2Table | 1.3.6.1.4.1.42229.1.2.4.1.17.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the otuc2 object | |||||||||||||||||||||
| Rotuc2Entry | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1 | NA | |||||||||||||||||||
| Cotuc2FecType | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.1 | CoriantTypesOtukFec | RO | ||||||||||||||||||
column · CoriantTypesOtukFec · read-only · current The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 | |||||||||||||||||||||
| Cotuc2AdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cotuc2OperStatus | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cotuc2AvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cotuc2AliasName | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cotuc2ServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.6 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cotuc2ExpSapi | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.7 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotuc2ExpDapi | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.8 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotuc2ExpOperator | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.9 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The expected operator TTI | |||||||||||||||||||||
| Cotuc2TxSapi | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.10 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotuc2TxDapi | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.11 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotuc2TxOperator | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.12 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The transmitter operator TTI | |||||||||||||||||||||
| Cotuc2TimDefectMode | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.13 | CoriantTypesTimMode | RO | ||||||||||||||||||
column · CoriantTypesTimMode · read-only · current The tim defect selection mode default value :NONE | |||||||||||||||||||||
| Cotuc2TimAct | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.14 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Cotuc2RxSapi | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.15 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotuc2RxDapi | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotuc2RxOperator | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.17 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The received operator TTI | |||||||||||||||||||||
| Cotuc2DegradeInterval | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.18 | Unsigned32 (2..10) | RO | ||||||||||||||||||
column · Unsigned32 (2..10) · read-only · current The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7 | |||||||||||||||||||||
| Cotuc2DegradeThreshold | 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.19 | Unsigned32 (1..2590845) | RO | ||||||||||||||||||
column · Unsigned32 (1..2590845) · read-only · current The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 | |||||||||||||||||||||
| Notuc3 | 1.3.6.1.4.1.42229.1.2.4.1.18 | ||||||||||||||||||||
| Totuc3Table | 1.3.6.1.4.1.42229.1.2.4.1.18.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the otuc3 object | |||||||||||||||||||||
| Rotuc3Entry | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1 | NA | |||||||||||||||||||
| Cotuc3FecType | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.1 | CoriantTypesOtukFec | RO | ||||||||||||||||||
column · CoriantTypesOtukFec · read-only · current The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 | |||||||||||||||||||||
| Cotuc3AdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cotuc3OperStatus | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cotuc3AvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cotuc3AliasName | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cotuc3ServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.6 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cotuc3ExpSapi | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.7 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotuc3ExpDapi | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.8 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotuc3ExpOperator | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.9 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The expected operator TTI | |||||||||||||||||||||
| Cotuc3TxSapi | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.10 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotuc3TxDapi | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.11 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotuc3TxOperator | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.12 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The transmitter operator TTI | |||||||||||||||||||||
| Cotuc3TimDefectMode | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.13 | CoriantTypesTimMode | RO | ||||||||||||||||||
column · CoriantTypesTimMode · read-only · current The tim defect selection mode default value :NONE | |||||||||||||||||||||
| Cotuc3TimAct | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.14 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Cotuc3RxSapi | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.15 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received sapi(Source Access Point Identifier) | |||||||||||||||||||||
| Cotuc3RxDapi | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received dapi(Destination Access Point Identifier) | |||||||||||||||||||||
| Cotuc3RxOperator | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.17 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The received operator TTI | |||||||||||||||||||||
| Cotuc3DegradeInterval | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.18 | Unsigned32 (2..10) | RO | ||||||||||||||||||
column · Unsigned32 (2..10) · read-only · current The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7 | |||||||||||||||||||||
| Cotuc3DegradeThreshold | 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.19 | Unsigned32 (1..2590845) | RO | ||||||||||||||||||
column · Unsigned32 (1..2590845) · read-only · current The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 | |||||||||||||||||||||
| NochOs | 1.3.6.1.4.1.42229.1.2.4.1.19 | ||||||||||||||||||||
| TochOsTable | 1.3.6.1.4.1.42229.1.2.4.1.19.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the och-os MO | |||||||||||||||||||||
| RochOsEntry | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1 | NA | |||||||||||||||||||
| CochOsModulationFormat | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.1 | INTEGER | RO | dp16qam(2) | |||||||||||||||||
column · INTEGER · read-only · current Currently och-os modulation format
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsLineEncoding | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.2 | INTEGER | RO | nonDifferential(1) | |||||||||||||||||
column · INTEGER · read-only · current Currently line-encoding mode
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsFrequency | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.3 | CoriantTypesFreq | RO | 194200000 | |||||||||||||||||
column · CoriantTypesFreq · read-only · current The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only. UNITS:MHz default value :0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsActualFrequency | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.4 | CoriantTypesFreq | RO | 194200000 | |||||||||||||||||
column · CoriantTypesFreq · read-only · current The actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsRxFrequency | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.5 | CoriantTypesFreq | RO | 0 | |||||||||||||||||
column · CoriantTypesFreq · read-only · current The rx laser frequency. Special for 0 means it is same as tx laser frequency. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsActualRxFrequency | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.6 | CoriantTypesFreq | RO | 194200214 | |||||||||||||||||
column · CoriantTypesFreq · read-only · current The actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and Rx. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsLaserEnable | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.7 | CoriantTypesEnableSwitch | RO | 1 | |||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of output laser. default value :disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsRequiredTxOpticalPower | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.8 | CoriantTypesOpticalPower | RO | 0.0 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current This is to support adjustable optical power of Line side. default value :1.0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsActualTxOpticalPower | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.9 | CoriantTypesOpticalPower | RO | 0.0 | |||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current This is the actual transmitting optical power of Line side. default value :-99.0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsFecType | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.10 | CoriantTypesOtukFec | RO | 8 | |||||||||||||||||
column · CoriantTypesOtukFec · read-only · current The FEC type of och-os default value :SDFEC25 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsRxAttenuation | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.11 | CoriantTypesOpticalDB | RO | 0.0 | |||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default value :0.0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsTxFilterRollOff | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.12 | OCTET STRING | RO | 0.4 | |||||||||||||||||
column · OCTET STRING · read-only · current Transmitter filter roll off factor. default value :0.2 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsPreemphasis | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.13 | CoriantTypesEnableSwitch | RO | 1 | |||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Preemphasis of transmitted signal. default value :enabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsPreemphasisValue | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.14 | OCTET STRING | RO | 1.0 | |||||||||||||||||
column · OCTET STRING · read-only · current Preemphasis of transmitted signal. default value :1.0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.15 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.16 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.17 | Bits | RO | 00 00 00 00 | |||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsAliasName | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.18 | OCTET STRING (SIZE (0..256)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.19 | CoriantTypesEnableSwitch | RO | 2 | |||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.20 | INTEGER | RO | none(0) | |||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.21 | OCTET STRING (SIZE (0..128)) | RO | | |||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsDGD | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.22 | Unsigned32 | RO | 3 | |||||||||||||||||
column · Unsigned32 · read-only · current Value of Differential Group Delay UNITS:ps Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsCD | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.23 | INTEGER | RO | 156 | |||||||||||||||||
column · INTEGER · read-only · current Value of Chromatic Dispersion UNITS:ps/nm Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsOSNR | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.24 | CoriantTypesOpticalDB | RO | 33.0 | |||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current Current value of OSNR. The result could be OSNR value with dB Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsQFactor | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.25 | CoriantTypesOpticalDB | RO | 8.9 | |||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current Current value of Q-factor Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsPreFecBer | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.26 | OCTET STRING | RO | 3.343653e-03 | |||||||||||||||||
column · OCTET STRING · read-only · current Current value of PreFEC Bit Error Ratio. default value :-99.0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsCdRangeLow | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.27 | INTEGER | RO | -45000 | |||||||||||||||||
column · INTEGER · read-only · current low value of chromatic dispersion search range. UNITS:ps/nm default value :-45000 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsCdRangeHigh | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.28 | INTEGER | RO | 45000 | |||||||||||||||||
column · INTEGER · read-only · current high value of chromatic dispersion search range. UNITS:ps/nm default value :45000 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CochOsPropagateShutdown | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.29 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current When the attribute value is set to yes, the transmit laser will be shutdown if the whole service of the direction has signal failure, the function mainly used in regeneration node to propagate signal failure as LOS. default value :no | |||||||||||||||||||||
| CochOsFastSopMode | 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.31 | CoriantTypesEnableSwitch | RO | 2 | |||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default value :disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nwan10gSonet | 1.3.6.1.4.1.42229.1.2.4.1.30 | ||||||||||||||||||||
| Twan10gSonetTable | 1.3.6.1.4.1.42229.1.2.4.1.30.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the 10GWAN_SONET object. | |||||||||||||||||||||
| Rwan10gSonetEntry | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1 | NA | |||||||||||||||||||
| Cwan10gSonetMappingMode | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
| |||||||||||||||||||||
| Cwan10gSonetAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cwan10gSonetOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cwan10gSonetAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cwan10gSonetAliasName | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cwan10gSonetClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.6 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Cwan10gSonetClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.7 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Cwan10gSonetHoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.8 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| Cwan10gSonetNearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.9 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Cwan10gSonetAlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.10 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Cwan10gSonetLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.11 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Cwan10gSonetLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Cwan10gSonetTestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.13 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| Cwan10gSonetTestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.14 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| Cwan10gSonetServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.15 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cwan10gSonetExpTrc | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected trc(trail trace identification) | |||||||||||||||||||||
| Cwan10gSonetTxTrc | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.17 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm' | |||||||||||||||||||||
| Cwan10gSonetRxTrc | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.18 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received trc(trail trace identification) | |||||||||||||||||||||
| Cwan10gSonetTimAct | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.19 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Cwan10gSonetTimMonitor | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.20 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of tim defect monitor mode default value :disabled | |||||||||||||||||||||
| Cwan10gSonetAisType | 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current NULL default value :Generic-AIS
| |||||||||||||||||||||
| Nwan10gSdh | 1.3.6.1.4.1.42229.1.2.4.1.31 | ||||||||||||||||||||
| Twan10gSdhTable | 1.3.6.1.4.1.42229.1.2.4.1.31.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the 10GWAN_SDH object. | |||||||||||||||||||||
| Rwan10gSdhEntry | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1 | NA | |||||||||||||||||||
| Cwan10gSdhMappingMode | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mapping mode of client port packets into ODUk. default value :not-applicable
| |||||||||||||||||||||
| Cwan10gSdhAdminStatus | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| Cwan10gSdhOperStatus | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| Cwan10gSdhAvailStatus | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| Cwan10gSdhAliasName | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Cwan10gSdhClientShutdown | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.6 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of client-shutdown. default value :no | |||||||||||||||||||||
| Cwan10gSdhClientShutdownHoldoffTimer | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.7 | Unsigned32 (0..1000) | RO | ||||||||||||||||||
column · Unsigned32 (0..1000) · read-only · current The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 | |||||||||||||||||||||
| Cwan10gSdhHoldoffSignal | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.8 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no | |||||||||||||||||||||
| Cwan10gSdhNearEndAls | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.9 | CoriantTypesYesNo | RO | ||||||||||||||||||
column · CoriantTypesYesNo · read-only · current The switching of near end ALS. default value :no | |||||||||||||||||||||
| Cwan10gSdhAlsDegradeMode | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.10 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The switching of defect BERSD-ODU trig ALS default value :disabled | |||||||||||||||||||||
| Cwan10gSdhLoopbackEnable | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.11 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of loopback function. default value :disabled | |||||||||||||||||||||
| Cwan10gSdhLoopbackType | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type mode of loopback function default value :none
| |||||||||||||||||||||
| Cwan10gSdhTestSignalType | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.13 | CoriantTypesTestSignalType | RO | ||||||||||||||||||
column · CoriantTypesTestSignalType · read-only · current The type mode of test signal. default value :NONE | |||||||||||||||||||||
| Cwan10gSdhTestSignalEnable | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.14 | CoriantTypesTestSignalConfig | RO | ||||||||||||||||||
column · CoriantTypesTestSignalConfig · read-only · current The enable switching of test signal function default value :NONE | |||||||||||||||||||||
| Cwan10gSdhServiceLabel | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.15 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection related facility. | |||||||||||||||||||||
| Cwan10gSdhExpTrc | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.16 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The expected trc(trail trace identification) | |||||||||||||||||||||
| Cwan10gSdhTxTrc | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.17 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm' | |||||||||||||||||||||
| Cwan10gSdhRxTrc | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.18 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The received trc(trail trace identification) | |||||||||||||||||||||
| Cwan10gSdhTimAct | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.19 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of inserting AIS by tim function default value :disabled | |||||||||||||||||||||
| Cwan10gSdhTimMonitor | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.20 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current The enable switching of tim defect monitor mode default value :disabled | |||||||||||||||||||||
| Cwan10gSdhAisType | 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current NULL default value :Generic-AIS
| |||||||||||||||||||||
| Neth10gStatistics | 1.3.6.1.4.1.42229.1.2.4.1.32 | ||||||||||||||||||||
| Teth10gStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.32.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Reth10gStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1 | NA | |||||||||||||||||||
| Ceth10gStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Ceth10gStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Ceth10gStatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits | |||||||||||||||||||||
| Ceth10gStatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks | |||||||||||||||||||||
| Ceth10gStatisticsEntryInSymbolErrors | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics Times counting for input signal symbol errors UNITS:Events | |||||||||||||||||||||
| Ceth10gStatisticsEntryInDropEvents | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal drop events UNITS:events | |||||||||||||||||||||
| Ceth10gStatisticsEntryInOctets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal octets UNITS:octets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInPackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInBroadcastPackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input broadcast packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInMulticastPackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.10 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input multicast packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInCrcAlignErrors | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.11 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input CRC error packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInUndersizePackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.12 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input undersize packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInOversizePackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.13 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input oversize packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInFragments | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.14 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input fragment packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInJabbers | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.15 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input jabber packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInPackets64octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.16 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 64 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInPackets65to127octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.17 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 65 to 127 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInPackets128to255octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.18 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 128 to 255 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInPackets256to511octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.19 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 256 to 511 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInPackets512to1023octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.20 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 512 to 1023 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryInPackets1024to1518octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.21 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 1024 to 1518 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutSymbolErrors | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.22 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics Times counting for output signal symbol errors UNITS:Events | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutDropEvents | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.23 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal drop events UNITS:events | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutOctets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.24 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal octets UNITS:octets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutPackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.25 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutBroadcastPackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.26 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output broadcast packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutMulticastPackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.27 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output multicast packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutCrcAlignErrors | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.28 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output CRC error packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutUndersizePackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.29 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output undersize packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutOversizePackets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.30 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output oversize packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutFragments | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.31 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output fragment packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutJabbers | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.32 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output jabber packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutPackets64octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.33 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 64 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutPackets65to127octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.34 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 65 to 127 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutPackets128to255octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.35 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 128 to 255 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutPackets256to511octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.36 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 256 to 511 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutPackets512to1023octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.37 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 512 to 1023 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth10gStatisticsEntryOutPackets1024to1518octets | 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.38 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 1024 to 1518 octets packets UNITS:packets | |||||||||||||||||||||
| NoduStatistics | 1.3.6.1.4.1.42229.1.2.4.1.33 | ||||||||||||||||||||
| ToduStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.33.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RoduStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.33.1.1 | NA | |||||||||||||||||||
| CoduStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| CoduStatisticsEntryErroredBlocks | 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for errored blocks UNITS:blocks | |||||||||||||||||||||
| CoduStatisticsEntryErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for errored signal UNITS:seconds | |||||||||||||||||||||
| CoduStatisticsEntrySeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for severely errored signal UNITS:seconds | |||||||||||||||||||||
| CoduStatisticsEntryUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for unavailable signal UNITS:seconds | |||||||||||||||||||||
| CoduStatisticsEntryEncryptionFailRx | 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Failed Encryption Frames of Receive side UNITS:frames | |||||||||||||||||||||
| Neth40gStatistics | 1.3.6.1.4.1.42229.1.2.4.1.34 | ||||||||||||||||||||
| Teth40gStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.34.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Reth40gStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1 | NA | |||||||||||||||||||
| Ceth40gStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Ceth40gStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Ceth40gStatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits | |||||||||||||||||||||
| Ceth40gStatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks | |||||||||||||||||||||
| Ceth40gStatisticsEntryInSymbolErrors | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics Times counting for input signal symbol errors UNITS:Events | |||||||||||||||||||||
| Ceth40gStatisticsEntryInDropEvents | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal drop events UNITS:events | |||||||||||||||||||||
| Ceth40gStatisticsEntryInOctets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal octets UNITS:octets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInPackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInBroadcastPackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input broadcast packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInMulticastPackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.10 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input multicast packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInCrcAlignErrors | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.11 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input CRC error packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInUndersizePackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.12 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input undersize packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInOversizePackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.13 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input oversize packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInFragments | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.14 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input fragment packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInJabbers | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.15 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input jabber packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInPackets64octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.16 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 64 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInPackets65to127octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.17 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 65 to 127 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInPackets128to255octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.18 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 128 to 255 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInPackets256to511octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.19 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 256 to 511 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInPackets512to1023octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.20 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 512 to 1023 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryInPackets1024to1518octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.21 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 1024 to 1518 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutSymbolErrors | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.22 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics Times counting for output signal symbol errors UNITS:Events | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutDropEvents | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.23 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal drop events UNITS:events | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutOctets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.24 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal octets UNITS:octets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutPackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.25 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutBroadcastPackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.26 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output broadcast packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutMulticastPackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.27 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output multicast packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutCrcAlignErrors | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.28 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output CRC error packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutUndersizePackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.29 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output undersize packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutOversizePackets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.30 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output oversize packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutFragments | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.31 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output fragment packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutJabbers | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.32 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output jabber packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutPackets64octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.33 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 64 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutPackets65to127octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.34 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 65 to 127 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutPackets128to255octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.35 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 128 to 255 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutPackets256to511octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.36 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 256 to 511 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutPackets512to1023octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.37 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 512 to 1023 octets packets UNITS:packets | |||||||||||||||||||||
| Ceth40gStatisticsEntryOutPackets1024to1518octets | 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.38 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 1024 to 1518 octets packets UNITS:packets | |||||||||||||||||||||
| Neth100gStatistics | 1.3.6.1.4.1.42229.1.2.4.1.35 | ||||||||||||||||||||
| Teth100gStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.35.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Reth100gStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1 | NA | |||||||||||||||||||
| Ceth100gStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.1 | IetfYangTypesDateAndTime | RO | 2018-11-29T02:05:42+00:00 | |||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.2 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.3 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.4 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInSymbolErrors | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.5 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics Times counting for input signal symbol errors UNITS:Events Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInDropEvents | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.6 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal drop events UNITS:events Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInOctets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.7 | OCTET STRING | RO | 17993747593662867 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal octets UNITS:octets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInPackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.8 | OCTET STRING | RO | 27018746695281 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input signal packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInBroadcastPackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.9 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input broadcast packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInMulticastPackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.10 | OCTET STRING | RO | 240353 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input multicast packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInCrcAlignErrors | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.11 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input CRC error packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInUndersizePackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.12 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input undersize packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInOversizePackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.13 | OCTET STRING | RO | 4848900214085 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input oversize packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInFragments | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.14 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input fragment packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInJabbers | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.15 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input jabber packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInPackets64octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.16 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 64 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInPackets65to127octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.17 | OCTET STRING | RO | 11233964853734 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 65 to 127 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInPackets128to255octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.18 | OCTET STRING | RO | 3706563357995 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 128 to 255 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInPackets256to511octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.19 | OCTET STRING | RO | 1150502399621 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 256 to 511 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInPackets512to1023octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.20 | OCTET STRING | RO | 907097152673 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 512 to 1023 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryInPackets1024to1518octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.21 | OCTET STRING | RO | 5171722526313 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for input 1024 to 1518 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutSymbolErrors | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.22 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics Times counting for output signal symbol errors UNITS:Events Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutDropEvents | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.23 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal drop events UNITS:events Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutOctets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.24 | OCTET STRING | RO | 23851963645187670 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal octets UNITS:octets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutPackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.25 | OCTET STRING | RO | 26923699213009 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output signal packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutBroadcastPackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.26 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output broadcast packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutMulticastPackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.27 | OCTET STRING | RO | 240349 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output multicast packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutCrcAlignErrors | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.28 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output CRC error packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutUndersizePackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.29 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output undersize packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutOversizePackets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.30 | OCTET STRING | RO | 10110458562570 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output oversize packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutFragments | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.31 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output fragment packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutJabbers | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.32 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output jabber packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutPackets64octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.33 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 64 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutPackets65to127octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.34 | OCTET STRING | RO | 8644636844352 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 65 to 127 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutPackets128to255octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.35 | OCTET STRING | RO | 2261810539972 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 128 to 255 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutPackets256to511octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.36 | OCTET STRING | RO | 904686926414 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 256 to 511 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutPackets512to1023octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.37 | OCTET STRING | RO | 816759238264 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 512 to 1023 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ceth100gStatisticsEntryOutPackets1024to1518octets | 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.38 | OCTET STRING | RO | 4185351953443 | |||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for output 1024 to 1518 octets packets UNITS:packets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Notu4Statistics | 1.3.6.1.4.1.42229.1.2.4.1.36 | ||||||||||||||||||||
| Totu4StatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.36.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rotu4StatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1 | NA | |||||||||||||||||||
| Cotu4StatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cotu4StatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cotu4StatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits | |||||||||||||||||||||
| Cotu4StatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks | |||||||||||||||||||||
| Cotu4StatisticsEntryErroredBlocks | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for errored blocks UNITS:blocks | |||||||||||||||||||||
| Cotu4StatisticsEntryErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for errored signal UNITS:seconds | |||||||||||||||||||||
| Cotu4StatisticsEntrySeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for severely errored signal UNITS:seconds | |||||||||||||||||||||
| Cotu4StatisticsEntryUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for unavailable signal UNITS:seconds | |||||||||||||||||||||
| Notu2Statistics | 1.3.6.1.4.1.42229.1.2.4.1.37 | ||||||||||||||||||||
| Totu2StatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.37.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rotu2StatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1 | NA | |||||||||||||||||||
| Cotu2StatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cotu2StatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cotu2StatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits | |||||||||||||||||||||
| Cotu2StatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks | |||||||||||||||||||||
| Cotu2StatisticsEntryErroredBlocks | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for errored blocks UNITS:blocks | |||||||||||||||||||||
| Cotu2StatisticsEntryErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for errored signal UNITS:seconds | |||||||||||||||||||||
| Cotu2StatisticsEntrySeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for severely errored signal UNITS:seconds | |||||||||||||||||||||
| Cotu2StatisticsEntryUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for unavailable signal UNITS:seconds | |||||||||||||||||||||
| Notu2eStatistics | 1.3.6.1.4.1.42229.1.2.4.1.38 | ||||||||||||||||||||
| Totu2eStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.38.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rotu2eStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1 | NA | |||||||||||||||||||
| Cotu2eStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cotu2eStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cotu2eStatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits | |||||||||||||||||||||
| Cotu2eStatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks | |||||||||||||||||||||
| Cotu2eStatisticsEntryErroredBlocks | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for errored blocks UNITS:blocks | |||||||||||||||||||||
| Cotu2eStatisticsEntryErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for errored signal UNITS:seconds | |||||||||||||||||||||
| Cotu2eStatisticsEntrySeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for severely errored signal UNITS:seconds | |||||||||||||||||||||
| Cotu2eStatisticsEntryUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for unavailable signal UNITS:seconds | |||||||||||||||||||||
| Noc192Statistics | 1.3.6.1.4.1.42229.1.2.4.1.39 | ||||||||||||||||||||
| Toc192StatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.39.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Roc192StatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.39.1.1 | NA | |||||||||||||||||||
| Coc192StatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Coc192StatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Coc192StatisticsEntryInCodingViolation | 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for ingress coding violation UNITS:bits | |||||||||||||||||||||
| Coc192StatisticsEntryInErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX errored signal UNITS:seconds | |||||||||||||||||||||
| Coc192StatisticsEntryInSeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX severely errored signal UNITS:seconds | |||||||||||||||||||||
| Coc192StatisticsEntryInUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX unavailable signal UNITS:seconds | |||||||||||||||||||||
| Coc192StatisticsEntryInSeverelyErroredFrameSecond | 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for ingress signal frame severely errored UNITS:seconds | |||||||||||||||||||||
| Nstm64Statistics | 1.3.6.1.4.1.42229.1.2.4.1.40 | ||||||||||||||||||||
| Tstm64StatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.40.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rstm64StatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.40.1.1 | NA | |||||||||||||||||||
| Cstm64StatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cstm64StatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cstm64StatisticsEntryInBackgroundBlockError | 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for ingress errored blocks UNITS:blocks | |||||||||||||||||||||
| Cstm64StatisticsEntryInErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX errored signal UNITS:seconds | |||||||||||||||||||||
| Cstm64StatisticsEntryInSeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX severely errored signal UNITS:seconds | |||||||||||||||||||||
| Cstm64StatisticsEntryInUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX unavailable signal UNITS:seconds | |||||||||||||||||||||
| Cstm64StatisticsEntryInOutOfFrameSeconds | 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for ingress signal lose of frame UNITS:seconds | |||||||||||||||||||||
| Nwan10gSonetStatistics | 1.3.6.1.4.1.42229.1.2.4.1.41 | ||||||||||||||||||||
| Twan10gSonetStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.41.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rwan10gSonetStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.41.1.1 | NA | |||||||||||||||||||
| Cwan10gSonetStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cwan10gSonetStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cwan10gSonetStatisticsEntryInCodingViolation | 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for ingress coding violation UNITS:bits | |||||||||||||||||||||
| Cwan10gSonetStatisticsEntryInErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX errored signal UNITS:seconds | |||||||||||||||||||||
| Cwan10gSonetStatisticsEntryInSeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX severely errored signal UNITS:seconds | |||||||||||||||||||||
| Cwan10gSonetStatisticsEntryInUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX unavailable signal UNITS:seconds | |||||||||||||||||||||
| Cwan10gSonetStatisticsEntryInSeverelyErroredFrameSecond | 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for ingress signal frame severely errored UNITS:seconds | |||||||||||||||||||||
| Nwan10gSdhStatistics | 1.3.6.1.4.1.42229.1.2.4.1.42 | ||||||||||||||||||||
| Twan10gSdhStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.42.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rwan10gSdhStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.42.1.1 | NA | |||||||||||||||||||
| Cwan10gSdhStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cwan10gSdhStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cwan10gSdhStatisticsEntryInBackgroundBlockError | 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for ingress errored blocks UNITS:blocks | |||||||||||||||||||||
| Cwan10gSdhStatisticsEntryInErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX errored signal UNITS:seconds | |||||||||||||||||||||
| Cwan10gSdhStatisticsEntryInSeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX severely errored signal UNITS:seconds | |||||||||||||||||||||
| Cwan10gSdhStatisticsEntryInUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for RX unavailable signal UNITS:seconds | |||||||||||||||||||||
| Cwan10gSdhStatisticsEntryInOutOfFrameSeconds | 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for ingress signal lose of frame UNITS:seconds | |||||||||||||||||||||
| Nfc8gStatistics | 1.3.6.1.4.1.42229.1.2.4.1.43 | ||||||||||||||||||||
| Tfc8gStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.43.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rfc8gStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.43.1.1 | NA | |||||||||||||||||||
| Cfc8gStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.43.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cfc8gStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.43.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cfc8gStatisticsEntryInSymbolErrors | 1.3.6.1.4.1.42229.1.2.4.1.43.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics Times counting for signal symbol errors UNITS:Events | |||||||||||||||||||||
| Nfc16gStatistics | 1.3.6.1.4.1.42229.1.2.4.1.44 | ||||||||||||||||||||
| Tfc16gStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.44.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rfc16gStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.44.1.1 | NA | |||||||||||||||||||
| Cfc16gStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.44.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cfc16gStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.44.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cfc16gStatisticsEntryInSymbolErrors | 1.3.6.1.4.1.42229.1.2.4.1.44.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics Times counting for signal symbol errors UNITS:Events | |||||||||||||||||||||
| Notuc2Statistics | 1.3.6.1.4.1.42229.1.2.4.1.45 | ||||||||||||||||||||
| Totuc2StatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.45.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rotuc2StatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1 | NA | |||||||||||||||||||
| Cotuc2StatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cotuc2StatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cotuc2StatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits | |||||||||||||||||||||
| Cotuc2StatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks | |||||||||||||||||||||
| Cotuc2StatisticsEntryErroredBlocks | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for errored blocks UNITS:blocks | |||||||||||||||||||||
| Cotuc2StatisticsEntryErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for errored signal UNITS:seconds | |||||||||||||||||||||
| Cotuc2StatisticsEntrySeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for severely errored signal UNITS:seconds | |||||||||||||||||||||
| Cotuc2StatisticsEntryUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for unavailable signal UNITS:seconds | |||||||||||||||||||||
| Notuc3Statistics | 1.3.6.1.4.1.42229.1.2.4.1.46 | ||||||||||||||||||||
| Totuc3StatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.46.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| Rotuc3StatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1 | NA | |||||||||||||||||||
| Cotuc3StatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Cotuc3StatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| Cotuc3StatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits | |||||||||||||||||||||
| Cotuc3StatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks | |||||||||||||||||||||
| Cotuc3StatisticsEntryErroredBlocks | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics counting for errored blocks UNITS:blocks | |||||||||||||||||||||
| Cotuc3StatisticsEntryErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for errored signal UNITS:seconds | |||||||||||||||||||||
| Cotuc3StatisticsEntrySeverelyErroredSeconds | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for severely errored signal UNITS:seconds | |||||||||||||||||||||
| Cotuc3StatisticsEntryUnavailableSeconds | 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for unavailable signal UNITS:seconds | |||||||||||||||||||||
| NochOsStatistics | 1.3.6.1.4.1.42229.1.2.4.1.47 | ||||||||||||||||||||
| TochOsStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.1.47.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RochOsStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.1.47.1.1 | NA | |||||||||||||||||||
| CochOsStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.1.47.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| CochOsStatisticsEntryLossOfSignalSeconds | 1.3.6.1.4.1.42229.1.2.4.1.47.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics seconds counting for signal loss UNITS:seconds | |||||||||||||||||||||
| CochOsStatisticsEntryBitErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.47.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics bits counting for error bit forward error correction UNITS:bits | |||||||||||||||||||||
| CochOsStatisticsEntryUncorrectedBlockErrorFec | 1.3.6.1.4.1.42229.1.2.4.1.47.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks | |||||||||||||||||||||
| NcRS | 1.3.6.1.4.1.42229.1.2.4.3 | ||||||||||||||||||||
| TcRSTable | 1.3.6.1.4.1.42229.1.2.4.3.1 | NA | |||||||||||||||||||
table · not-accessible · current Cross connection table. | |||||||||||||||||||||
| RcRSEntry | 1.3.6.1.4.1.42229.1.2.4.3.1.1 | NA | |||||||||||||||||||
| CcRSSrcTp | 1.3.6.1.4.1.42229.1.2.4.3.1.1.1 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Source tp of cross connection. | |||||||||||||||||||||
| CcRSDstTp | 1.3.6.1.4.1.42229.1.2.4.3.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Destination tp of cross connection. | |||||||||||||||||||||
| CcRSServiceLabel | 1.3.6.1.4.1.42229.1.2.4.3.1.1.3 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current Path/service name of cross-connection. | |||||||||||||||||||||
| CcRSManagedBy | 1.3.6.1.4.1.42229.1.2.4.3.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user
| |||||||||||||||||||||
| CcRSAliasName | 1.3.6.1.4.1.42229.1.2.4.3.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| NfiberConnection | 1.3.6.1.4.1.42229.1.2.4.4 | ||||||||||||||||||||
| TfiberConnectionTable | 1.3.6.1.4.1.42229.1.2.4.4.1 | NA | |||||||||||||||||||
table · not-accessible · current Fiber connection table which will be user managed and be explicitly provisioned by user. Fiber Connection indicates the physical fiber connection between physical ports or subports. | |||||||||||||||||||||
| RfiberConnectionEntry | 1.3.6.1.4.1.42229.1.2.4.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of fiberConnectionTable | |||||||||||||||||||||
| CfiberConnectionSrcPort | 1.3.6.1.4.1.42229.1.2.4.4.1.1.1 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Source port of fiber connection. | |||||||||||||||||||||
| CfiberConnectionDstPort | 1.3.6.1.4.1.42229.1.2.4.4.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Destination port of fiber connection. | |||||||||||||||||||||
| CfiberConnectionType | 1.3.6.1.4.1.42229.1.2.4.4.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates fiber connection type. default value :two-way
| |||||||||||||||||||||
| CfiberConnectionFiberLabel | 1.3.6.1.4.1.42229.1.2.4.4.1.1.4 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current Label of fiber connection. | |||||||||||||||||||||
| CfiberConnectionAliasName | 1.3.6.1.4.1.42229.1.2.4.4.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Noptical | 1.3.6.1.4.1.42229.1.2.4.5 | ||||||||||||||||||||
| Nots | 1.3.6.1.4.1.42229.1.2.4.5.2 | ||||||||||||||||||||
| TotsTable | 1.3.6.1.4.1.42229.1.2.4.5.2.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the Optical Transmission Section (OTS) interface entity | |||||||||||||||||||||
| RotsEntry | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1 | NA | |||||||||||||||||||
| CotsName | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.1 | CoriantTypesNameIdentifier | RO | ||||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current The name is defined to uniquely identify the ots optical interface. | |||||||||||||||||||||
| CotsAdminStatus | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CotsOperStatus | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CotsAvailStatus | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CotsAliasName | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CotsSupportingRxPort | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.6 | OpticalCommonSupportingPort | RO | ||||||||||||||||||
column · OpticalCommonSupportingPort · read-only · current Supporting Rx port for the optical interface. | |||||||||||||||||||||
| CotsSupportingTxPort | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.7 | OpticalCommonSupportingPort | RO | ||||||||||||||||||
column · OpticalCommonSupportingPort · read-only · current Supporting Tx port for the optical interface. | |||||||||||||||||||||
| CotsMeasuredSpanLoss | 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.8 | CoriantTypesOpticalDB | RO | ||||||||||||||||||
column · CoriantTypesOpticalDB · read-only · current The measured span loss excluding offset. | |||||||||||||||||||||
| Noms | 1.3.6.1.4.1.42229.1.2.4.5.3 | ||||||||||||||||||||
| TomsTable | 1.3.6.1.4.1.42229.1.2.4.5.3.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the optical multiplex section (OMS) interface MO | |||||||||||||||||||||
| RomsEntry | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1 | NA | |||||||||||||||||||
| ComsName | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.1 | CoriantTypesNameIdentifier | RO | ||||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current The name is defined to uniquely identify the oms optical interface. | |||||||||||||||||||||
| ComsAdminStatus | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| ComsOperStatus | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| ComsAvailStatus | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| ComsAliasName | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| ComsSupportingRxPort | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.6 | OpticalCommonSupportingPort | RO | ||||||||||||||||||
column · OpticalCommonSupportingPort · read-only · current Supporting Rx port for the optical interface. | |||||||||||||||||||||
| ComsSupportingTxPort | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.7 | OpticalCommonSupportingPort | RO | ||||||||||||||||||
column · OpticalCommonSupportingPort · read-only · current Supporting Tx port for the optical interface. | |||||||||||||||||||||
| ComsParentOtsInterface | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.8 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Supporting OTS interface. | |||||||||||||||||||||
| ComsRxOpticalPower | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.9 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power | |||||||||||||||||||||
| ComsTxOpticalPower | 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.10 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power | |||||||||||||||||||||
| Nosc | 1.3.6.1.4.1.42229.1.2.4.5.4 | ||||||||||||||||||||
| ToscTable | 1.3.6.1.4.1.42229.1.2.4.5.4.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the Optical Supervision Channel (OSC) MO | |||||||||||||||||||||
| RoscEntry | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1 | NA | |||||||||||||||||||
| CoscName | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.1 | CoriantTypesNameIdentifier | RO | ||||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current The name is defined to uniquely identify the osc optical interface. | |||||||||||||||||||||
| CoscAdminStatus | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CoscOperStatus | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CoscAvailStatus | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CoscAliasName | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CoscSupportingRxPort | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.6 | OpticalCommonSupportingPort | RO | ||||||||||||||||||
column · OpticalCommonSupportingPort · read-only · current Supporting Rx port for the optical interface. | |||||||||||||||||||||
| CoscSupportingTxPort | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.7 | OpticalCommonSupportingPort | RO | ||||||||||||||||||
column · OpticalCommonSupportingPort · read-only · current Supporting Tx port for the optical interface. | |||||||||||||||||||||
| CoscParentOtsInterface | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.8 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Supporting OTS insterface. | |||||||||||||||||||||
| CoscMode | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating the current OSC mode. default value :155M52
| |||||||||||||||||||||
| CoscWavelength | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.10 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Indicates the wavelength band of the OSC channel. UNITS:nm default value :1510 | |||||||||||||||||||||
| CoscDataCommunication | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.11 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Configuration for enable or disable data communication network support of the OSC. default value :enabled | |||||||||||||||||||||
| CoscRxOpticalPower | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.12 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power | |||||||||||||||||||||
| CoscTxOpticalPower | 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.13 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power | |||||||||||||||||||||
| Ngopt | 1.3.6.1.4.1.42229.1.2.4.5.5 | ||||||||||||||||||||
| TgoptTable | 1.3.6.1.4.1.42229.1.2.4.5.5.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents the Generic Optical Section Interface (GOPT) MO | |||||||||||||||||||||
| RgoptEntry | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1 | NA | |||||||||||||||||||
| CgoptName | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.1 | CoriantTypesNameIdentifier | RO | ||||||||||||||||||
column · CoriantTypesNameIdentifier · read-only · current The name is defined to uniquely identify the gopt optical interface. | |||||||||||||||||||||
| CgoptAdminStatus | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CgoptOperStatus | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CgoptAvailStatus | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CgoptAliasName | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.5 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CgoptSupportingRxPort | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.6 | OpticalCommonSupportingPort | RO | ||||||||||||||||||
column · OpticalCommonSupportingPort · read-only · current Supporting Rx port for the optical interface. | |||||||||||||||||||||
| CgoptSupportingTxPort | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.7 | OpticalCommonSupportingPort | RO | ||||||||||||||||||
column · OpticalCommonSupportingPort · read-only · current Supporting Tx port for the optical interface. | |||||||||||||||||||||
| CgoptRxOpticalPower | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.8 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Received optical power | |||||||||||||||||||||
| CgoptTxOpticalPower | 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.9 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current Transmitted optical power | |||||||||||||||||||||
| NomsStatistics | 1.3.6.1.4.1.42229.1.2.4.5.9 | ||||||||||||||||||||
| TomsStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.5.9.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RomsStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.5.9.1.1 | NA | |||||||||||||||||||
| ComsStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.5.9.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| NoscStatistics | 1.3.6.1.4.1.42229.1.2.4.5.10 | ||||||||||||||||||||
| ToscStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.5.10.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RoscStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.5.10.1.1 | NA | |||||||||||||||||||
| CoscStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.5.10.1.1.1 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| NgoptStatistics | 1.3.6.1.4.1.42229.1.2.4.5.11 | ||||||||||||||||||||
| TgoptStatisticsTable | 1.3.6.1.4.1.42229.1.2.4.5.11.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RgoptStatisticsEntry | 1.3.6.1.4.1.42229.1.2.4.5.11.1.1 | NA | |||||||||||||||||||
| CgoptStatisticsEntryProtectionSwitchDuration | 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Protection Switch Duration UNITS:seconds | |||||||||||||||||||||
| CgoptStatisticsEntryProtectionSwitchCount | 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Protection Switch Count UNITS:times | |||||||||||||||||||||
| CgoptStatisticsEntryLossTx | 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Loss of Signal Seconds of Transmit side UNITS:seconds | |||||||||||||||||||||
| CgoptStatisticsEntryLossRx | 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Loss of Signal Seconds of Receive side UNITS:seconds | |||||||||||||||||||||
| CgoptStatisticsEntryLastClear | 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.5 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The start time of statistics monitor default value :0000-00-00T00:00:00.000Z | |||||||||||||||||||||
| Nlldp | 1.3.6.1.4.1.42229.1.2.4.6 | ||||||||||||||||||||
| SlldpStatusNe | 1.3.6.1.4.1.42229.1.2.4.6.1 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
scalar · CoriantTypesEnableSwitch · read-only · current Global lldp control on NE level. Value of 'enabled', then the LLDP agent will receive, but it will not transmit LLDP frames on all ports with port level lldp not disabled of the NE. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on all ports of the NE. If there is remote systems information which is received on ports supporting LLDP and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. default value :disabled | |||||||||||||||||||||
| Nperformance | 1.3.6.1.4.1.42229.1.2.5 | ||||||||||||||||||||
| NperformanceInfo | 1.3.6.1.4.1.42229.1.2.5.1 | ||||||||||||||||||||
| SperformancePmdaystart | 1.3.6.1.4.1.42229.1.2.5.1.1 | Unsigned32 (0..23) | RO | ||||||||||||||||||
scalar · Unsigned32 (0..23) · read-only · current Specifies the hour of starting collecting 1-DAY monitoring parameters. To reset the NE clock to the default value of 00:00 hours, the parameter should contain the value 0. UNITS:hour default value :0 | |||||||||||||||||||||
| SperformanceStatisticsEnable | 1.3.6.1.4.1.42229.1.2.5.1.2 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
scalar · CoriantTypesEnableSwitch · read-only · current The global switch for all system statistics data collection. default value :enabled | |||||||||||||||||||||
| NpmPoint | 1.3.6.1.4.1.42229.1.2.5.2 | ||||||||||||||||||||
| TpmPointTable | 1.3.6.1.4.1.42229.1.2.5.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of performance monitoring points associated with the monitored management object. | |||||||||||||||||||||
| RpmPointEntry | 1.3.6.1.4.1.42229.1.2.5.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of pmPointTable | |||||||||||||||||||||
| CpmPointPmEntity | 1.3.6.1.4.1.42229.1.2.5.2.1.1.1 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Specifies the management object instance the performance monitoring data are collected for. | |||||||||||||||||||||
| CpmPointPmpType | 1.3.6.1.4.1.42229.1.2.5.2.1.1.2 | CoriantPmtypesPmpType | RO | ||||||||||||||||||
column · CoriantPmtypesPmpType · read-only · current Specifies the type of performance monitoring point. | |||||||||||||||||||||
| CpmPointPmTimePeriod | 1.3.6.1.4.1.42229.1.2.5.2.1.1.3 | CoriantTypesManagementTimePeriod | RO | ||||||||||||||||||
column · CoriantTypesManagementTimePeriod · read-only · current Specifies the time-period increments during which PM data are collected. | |||||||||||||||||||||
| CpmPointSupervisionSwitch | 1.3.6.1.4.1.42229.1.2.5.2.1.1.4 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Enable/disable counting for all performance monitoring parameters of the given PMP. default value :disabled | |||||||||||||||||||||
| CpmPointThresholdingSwitch | 1.3.6.1.4.1.42229.1.2.5.2.1.1.5 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Enable/disable the TCA processing and reporting for all performance monitoring parameters of the given PM point. default value :enabled | |||||||||||||||||||||
| CpmPointHistoryRecording | 1.3.6.1.4.1.42229.1.2.5.2.1.1.6 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Enable/disable the history data storage for all performance monitoring parameters of the given PM point. default value :enabled | |||||||||||||||||||||
| NpmData | 1.3.6.1.4.1.42229.1.2.5.3 | ||||||||||||||||||||
| TpmDataCurrentTable | 1.3.6.1.4.1.42229.1.2.5.3.2 | NA | |||||||||||||||||||
table · not-accessible · current Defines the get-pm output of record performance data for current time | |||||||||||||||||||||
| RpmDataCurrentEntry | 1.3.6.1.4.1.42229.1.2.5.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of pmDataCurrentTable | |||||||||||||||||||||
| CpmDataCurrentMonitoringDateTime | 1.3.6.1.4.1.42229.1.2.5.3.2.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Monitoring data and time' | |||||||||||||||||||||
| CpmDataCurrentPmParameter | 1.3.6.1.4.1.42229.1.2.5.3.2.1.2 | CoriantPmtypesPmParameter | NA | ||||||||||||||||||
column · CoriantPmtypesPmParameter · not-accessible · current Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. | |||||||||||||||||||||
| CpmDataCurrentPmValue | 1.3.6.1.4.1.42229.1.2.5.3.2.1.3 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current PM counter or gauge value of the PM parameter. | |||||||||||||||||||||
| CpmDataCurrentPmUnit | 1.3.6.1.4.1.42229.1.2.5.3.2.1.4 | CoriantCommonpmUnitOfValue | RO | ||||||||||||||||||
column · CoriantCommonpmUnitOfValue · read-only · current Unit of PM value. | |||||||||||||||||||||
| CpmDataCurrentValidity | 1.3.6.1.4.1.42229.1.2.5.3.2.1.5 | CoriantPmtypesValidityType | RO | ||||||||||||||||||
column · CoriantPmtypesValidityType · read-only · current Indicates whether or not a performance monitoring value is valid. | |||||||||||||||||||||
| TpmDataLatestHistoryTable | 1.3.6.1.4.1.42229.1.2.5.3.3 | NA | |||||||||||||||||||
table · not-accessible · current Defines the get-pm output of record performance data for latest history time | |||||||||||||||||||||
| RpmDataLatestHistoryEntry | 1.3.6.1.4.1.42229.1.2.5.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of pmDataLatestHistoryTable | |||||||||||||||||||||
| CpmDataLatestHistoryMonitoringDateTime | 1.3.6.1.4.1.42229.1.2.5.3.3.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Monitoring data and time' | |||||||||||||||||||||
| CpmDataLatestHistoryPmParameter | 1.3.6.1.4.1.42229.1.2.5.3.3.1.2 | CoriantPmtypesPmParameter | NA | ||||||||||||||||||
column · CoriantPmtypesPmParameter · not-accessible · current Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. | |||||||||||||||||||||
| CpmDataLatestHistoryPmValue | 1.3.6.1.4.1.42229.1.2.5.3.3.1.3 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current PM counter or gauge value of the PM parameter. | |||||||||||||||||||||
| CpmDataLatestHistoryPmUnit | 1.3.6.1.4.1.42229.1.2.5.3.3.1.4 | CoriantCommonpmUnitOfValue | RO | ||||||||||||||||||
column · CoriantCommonpmUnitOfValue · read-only · current Unit of PM value. | |||||||||||||||||||||
| CpmDataLatestHistoryValidity | 1.3.6.1.4.1.42229.1.2.5.3.3.1.5 | CoriantPmtypesValidityType | RO | ||||||||||||||||||
column · CoriantPmtypesValidityType · read-only · current Indicates whether or not a performance monitoring value is valid. | |||||||||||||||||||||
| TpmDataHistoryTable | 1.3.6.1.4.1.42229.1.2.5.3.4 | NA | |||||||||||||||||||
table · not-accessible · current Defines the get-pm output of record performance data for history | |||||||||||||||||||||
| RpmDataHistoryEntry | 1.3.6.1.4.1.42229.1.2.5.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of pmDataHistoryTable | |||||||||||||||||||||
| CpmDataHistoryRecordIndex | 1.3.6.1.4.1.42229.1.2.5.3.4.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Index of PM data records. | |||||||||||||||||||||
| CpmDataHistoryMonitoringDateTime | 1.3.6.1.4.1.42229.1.2.5.3.4.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Monitoring data and time' | |||||||||||||||||||||
| CpmDataHistoryPmParameter | 1.3.6.1.4.1.42229.1.2.5.3.4.1.3 | CoriantPmtypesPmParameter | NA | ||||||||||||||||||
column · CoriantPmtypesPmParameter · not-accessible · current Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. | |||||||||||||||||||||
| CpmDataHistoryPmValue | 1.3.6.1.4.1.42229.1.2.5.3.4.1.4 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current PM counter or gauge value of the PM parameter. | |||||||||||||||||||||
| CpmDataHistoryPmUnit | 1.3.6.1.4.1.42229.1.2.5.3.4.1.5 | CoriantCommonpmUnitOfValue | RO | ||||||||||||||||||
column · CoriantCommonpmUnitOfValue · read-only · current Unit of PM value. | |||||||||||||||||||||
| CpmDataHistoryValidity | 1.3.6.1.4.1.42229.1.2.5.3.4.1.6 | CoriantPmtypesValidityType | RO | ||||||||||||||||||
column · CoriantPmtypesValidityType · read-only · current Indicates whether or not a performance monitoring value is valid. | |||||||||||||||||||||
| NpmThresholdsValue | 1.3.6.1.4.1.42229.1.2.5.4 | ||||||||||||||||||||
| TpmThresholdsValueTable | 1.3.6.1.4.1.42229.1.2.5.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of entries of performance monitoring threshold value. | |||||||||||||||||||||
| RpmThresholdsValueEntry | 1.3.6.1.4.1.42229.1.2.5.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of pmThresholdsValueTable | |||||||||||||||||||||
| CpmThresholdsValuePmParameter | 1.3.6.1.4.1.42229.1.2.5.4.1.1.1 | CoriantPmtypesPmParameter | RO | ||||||||||||||||||
column · CoriantPmtypesPmParameter · read-only · current Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. | |||||||||||||||||||||
| CpmThresholdsValuePmHighThreshold | 1.3.6.1.4.1.42229.1.2.5.4.1.1.2 | CoriantCommonpmThresholdValue | RO | ||||||||||||||||||
column · CoriantCommonpmThresholdValue · read-only · current Specifies the desired high threshold value of the selected performance monitoring parameter. | |||||||||||||||||||||
| CpmThresholdsValuePmLowThreshold | 1.3.6.1.4.1.42229.1.2.5.4.1.1.3 | CoriantCommonpmThresholdValue | RO | ||||||||||||||||||
column · CoriantCommonpmThresholdValue · read-only · current Specifies the desired low threshold value of the selected performance monitoring parameter. | |||||||||||||||||||||
| CpmThresholdsValuePmUnit | 1.3.6.1.4.1.42229.1.2.5.4.1.1.4 | CoriantCommonpmUnitOfValue | RO | ||||||||||||||||||
column · CoriantCommonpmUnitOfValue · read-only · current The unit of the performance monitoring value. | |||||||||||||||||||||
| Nnetworking | 1.3.6.1.4.1.42229.1.2.6 | ||||||||||||||||||||
| NnetworkingInfo | 1.3.6.1.4.1.42229.1.2.6.1 | ||||||||||||||||||||
| SnetworkingSourceAddressSelectMode | 1.3.6.1.4.1.42229.1.2.6.1.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Select the source address for route next-hop entry. loopback-prefer mode select the numerically lowest address configured on loopback interfaces if exist, link-prefer mode select the address configured on the outgoing interface default value :link-prefer
| |||||||||||||||||||||
| Ninterface | 1.3.6.1.4.1.42229.1.2.6.2 | ||||||||||||||||||||
| TinterfaceTable | 1.3.6.1.4.1.42229.1.2.6.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of configured interfaces on the device. | |||||||||||||||||||||
| RinterfaceEntry | 1.3.6.1.4.1.42229.1.2.6.2.1.1 | NA | |||||||||||||||||||
| CinterfaceIfName | 1.3.6.1.4.1.42229.1.2.6.2.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The name of the interface. | |||||||||||||||||||||
| CinterfaceIfDescription | 1.3.6.1.4.1.42229.1.2.6.2.1.1.2 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current A textual description of the interface. | |||||||||||||||||||||
| CinterfaceIfType | 1.3.6.1.4.1.42229.1.2.6.2.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of the interface. Refer to http://www.iana.org/assignments/smi-numbers
| |||||||||||||||||||||
| CinterfaceAdminStatus | 1.3.6.1.4.1.42229.1.2.6.2.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CinterfaceOperStatus | 1.3.6.1.4.1.42229.1.2.6.2.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CinterfaceAvailStatus | 1.3.6.1.4.1.42229.1.2.6.2.1.1.6 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
| |||||||||||||||||||||
| CinterfaceAliasName | 1.3.6.1.4.1.42229.1.2.6.2.1.1.7 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Nethernet | 1.3.6.1.4.1.42229.1.2.6.3 | ||||||||||||||||||||
| TethernetTable | 1.3.6.1.4.1.42229.1.2.6.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The Ethernet attributes of an Ethernet interface. | |||||||||||||||||||||
| RethernetEntry | 1.3.6.1.4.1.42229.1.2.6.3.1.1 | NA | |||||||||||||||||||
| CethernetAutoNegotiation | 1.3.6.1.4.1.42229.1.2.6.3.1.1.1 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Auto negotiation mode. default value :disabled | |||||||||||||||||||||
| CethernetDuplexMode | 1.3.6.1.4.1.42229.1.2.6.3.1.1.2 | CoriantTypesDuplexMode | RO | ||||||||||||||||||
column · CoriantTypesDuplexMode · read-only · current Duplex Mode; only valid if auto negotiation is disabled. default value :full | |||||||||||||||||||||
| CethernetOperationalDuplexMode | 1.3.6.1.4.1.42229.1.2.6.3.1.1.3 | CoriantTypesDuplexMode | RO | ||||||||||||||||||
column · CoriantTypesDuplexMode · read-only · current Operational duplex mode. default value :NA | |||||||||||||||||||||
| CethernetRate | 1.3.6.1.4.1.42229.1.2.6.3.1.1.4 | CoriantTypesEthernetRate | RO | ||||||||||||||||||
column · CoriantTypesEthernetRate · read-only · current Required Ethernet Rate; only valid if auto negotiation is disabled. default value :max-rate | |||||||||||||||||||||
| CethernetOperationalEthernetRate | 1.3.6.1.4.1.42229.1.2.6.3.1.1.5 | CoriantTypesEthernetRate | RO | ||||||||||||||||||
column · CoriantTypesEthernetRate · read-only · current Operation ethernet rate. default value :NA | |||||||||||||||||||||
| CethernetFlowControl | 1.3.6.1.4.1.42229.1.2.6.3.1.1.6 | CoriantTypesFlowControl | RO | ||||||||||||||||||
column · CoriantTypesFlowControl · read-only · current Specifies the type of flow control to be supported. default value :tx-rx | |||||||||||||||||||||
| CethernetOperationalFlowControl | 1.3.6.1.4.1.42229.1.2.6.3.1.1.7 | CoriantTypesFlowControl | RO | ||||||||||||||||||
column · CoriantTypesFlowControl · read-only · current Operational flow control. default value :NA | |||||||||||||||||||||
| CethernetMacAddress | 1.3.6.1.4.1.42229.1.2.6.3.1.1.8 | IetfYangTypesMacAddress | RO | ||||||||||||||||||
column · IetfYangTypesMacAddress · read-only · current MAC Address of the port. default value :00:00:00:00:00:00 | |||||||||||||||||||||
| CethernetAliasName | 1.3.6.1.4.1.42229.1.2.6.3.1.1.9 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Nppp | 1.3.6.1.4.1.42229.1.2.6.4 | ||||||||||||||||||||
| TpppTable | 1.3.6.1.4.1.42229.1.2.6.4.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RpppEntry | 1.3.6.1.4.1.42229.1.2.6.4.1.1 | NA | |||||||||||||||||||
| CpppType | 1.3.6.1.4.1.42229.1.2.6.4.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies the link type associated with the ppp.
| |||||||||||||||||||||
| CpppPfRef | 1.3.6.1.4.1.42229.1.2.6.4.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Reference of the ppp profile. | |||||||||||||||||||||
| CpppResourceRef | 1.3.6.1.4.1.42229.1.2.6.4.1.1.3 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Reference of the lower layer resource associated with this interface. | |||||||||||||||||||||
| CpppAliasName | 1.3.6.1.4.1.42229.1.2.6.4.1.1.4 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Nipv4 | 1.3.6.1.4.1.42229.1.2.6.5 | ||||||||||||||||||||
| Tipv4Table | 1.3.6.1.4.1.42229.1.2.6.5.1 | NA | |||||||||||||||||||
table · not-accessible · current Parameters for the IPv4 address family. | |||||||||||||||||||||
| Ripv4Entry | 1.3.6.1.4.1.42229.1.2.6.5.1.1 | NA | |||||||||||||||||||
| Cipv4Forwarding | 1.3.6.1.4.1.42229.1.2.6.5.1.1.1 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Controls IPv4 packet forwarding of datagrams received by, but not addressed to, this interface. IPv4 routers forward datagrams. IPv4 hosts do not (except those source-routed via the host). default value :true | |||||||||||||||||||||
| Cipv4Mtu | 1.3.6.1.4.1.42229.1.2.6.5.1.1.2 | Unsigned32 (68..65535) | RO | ||||||||||||||||||
column · Unsigned32 (68..65535) · read-only · current The size, in octets, of the largest IPv4 packet that the interface will send and receive. The server may restrict the allowed values for this leaf, depending on the interface's type. If this leaf is not configured, the operationally used MTU depends on the interface's type. UNITS:octets | |||||||||||||||||||||
| Cipv4AddressAssignmentMethod | 1.3.6.1.4.1.42229.1.2.6.5.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current IPv4 address assignment method. default value :static
| |||||||||||||||||||||
| NipAddress | 1.3.6.1.4.1.42229.1.2.6.6 | ||||||||||||||||||||
| TipAddressTable | 1.3.6.1.4.1.42229.1.2.6.6.1 | NA | |||||||||||||||||||
table · not-accessible · current The IPv4 address on the interface. | |||||||||||||||||||||
| RipAddressEntry | 1.3.6.1.4.1.42229.1.2.6.6.1.1 | NA | |||||||||||||||||||
| CipAddressIp | 1.3.6.1.4.1.42229.1.2.6.6.1.1.1 | IetfInetTypesIpv4Address | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Address · read-only · current The IPv4 address on the interface. | |||||||||||||||||||||
| CipAddressOrigin | 1.3.6.1.4.1.42229.1.2.6.6.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The origin of this address. default value :static
| |||||||||||||||||||||
| CipAddressPrefixLength | 1.3.6.1.4.1.42229.1.2.6.6.1.1.3 | Unsigned32 (0..32) | RO | ||||||||||||||||||
column · Unsigned32 (0..32) · read-only · current The length of the subnet prefix. | |||||||||||||||||||||
| NipUnnumbered | 1.3.6.1.4.1.42229.1.2.6.7 | ||||||||||||||||||||
| TipUnnumberedTable | 1.3.6.1.4.1.42229.1.2.6.7.1 | NA | |||||||||||||||||||
table · not-accessible · current The IP unnumbered configurations. | |||||||||||||||||||||
| RipUnnumberedEntry | 1.3.6.1.4.1.42229.1.2.6.7.1.1 | NA | |||||||||||||||||||
| CipUnnumberedUnnumEnabled | 1.3.6.1.4.1.42229.1.2.6.7.1.1.1 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates that the interface is unnumbered. By default the interface is numbered, i.e., expected to have an IP address configuration. default value :false | |||||||||||||||||||||
| CipUnnumberedParentInterface | 1.3.6.1.4.1.42229.1.2.6.7.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Reference of the parent interface of the unnumbered interface. | |||||||||||||||||||||
| NroutingProtocol | 1.3.6.1.4.1.42229.1.2.6.9 | ||||||||||||||||||||
| TroutingProtocolTable | 1.3.6.1.4.1.42229.1.2.6.9.1 | NA | |||||||||||||||||||
table · not-accessible · current Routing protocol instance. | |||||||||||||||||||||
| RroutingProtocolEntry | 1.3.6.1.4.1.42229.1.2.6.9.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of routingProtocolTable | |||||||||||||||||||||
| CroutingProtocolRtpType | 1.3.6.1.4.1.42229.1.2.6.9.1.1.1 | CoriantTypesRtpType | RO | ||||||||||||||||||
column · CoriantTypesRtpType · read-only · current The type of the routing protocol instance. | |||||||||||||||||||||
| CroutingProtocolRtpName | 1.3.6.1.4.1.42229.1.2.6.9.1.1.2 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The name of the routing protocol instance. For system-controlled instances this name is persistent, i.e., it SHOULD NOT change across reboots. | |||||||||||||||||||||
| CroutingProtocolDescription | 1.3.6.1.4.1.42229.1.2.6.9.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Textual description of the routing protocol instance. | |||||||||||||||||||||
| NstaticRoute | 1.3.6.1.4.1.42229.1.2.6.10 | ||||||||||||||||||||
| TstaticRouteTable | 1.3.6.1.4.1.42229.1.2.6.10.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of static routes. | |||||||||||||||||||||
| RstaticRouteEntry | 1.3.6.1.4.1.42229.1.2.6.10.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of staticRouteTable | |||||||||||||||||||||
| CstaticRouteDestinationPrefix | 1.3.6.1.4.1.42229.1.2.6.10.1.1.1 | IetfInetTypesIpv4Prefix (SIZE (1..64)) | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Prefix (SIZE (1..64)) · read-only · current IPv4 destination prefix. | |||||||||||||||||||||
| CstaticRouteDescription | 1.3.6.1.4.1.42229.1.2.6.10.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Textual description of the static route. | |||||||||||||||||||||
| CstaticRouteAdvertised | 1.3.6.1.4.1.42229.1.2.6.10.1.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current When set to YES, the static route is advertised in the routing protocol. For OSPF, the static route will be advertised as an AS external route, if OSPF is configured as an ASBR. default value :false | |||||||||||||||||||||
| NnextHop | 1.3.6.1.4.1.42229.1.2.6.11 | ||||||||||||||||||||
| TnextHopTable | 1.3.6.1.4.1.42229.1.2.6.11.1 | NA | |||||||||||||||||||
table · not-accessible · current Configuration of static next-hop. | |||||||||||||||||||||
| RnextHopEntry | 1.3.6.1.4.1.42229.1.2.6.11.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of nextHopTable | |||||||||||||||||||||
| CnextHopIndex | 1.3.6.1.4.1.42229.1.2.6.11.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current An user-specified identifier utilised to uniquely reference the next-hop entry in the next-hop list. The value of this index has no semantic meaning other than for referencing the entry. | |||||||||||||||||||||
| CnextHopOutgoingInterface | 1.3.6.1.4.1.42229.1.2.6.11.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Reference of the outgoing interface. | |||||||||||||||||||||
| CnextHopAddress | 1.3.6.1.4.1.42229.1.2.6.11.1.1.3 | IetfInetTypesIpv4Address | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Address · read-only · current IPv4 address of the next-hop. | |||||||||||||||||||||
| CnextHopMetric | 1.3.6.1.4.1.42229.1.2.6.11.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current metric of the next-hop. default value :0 | |||||||||||||||||||||
| Nospf | 1.3.6.1.4.1.42229.1.2.6.12 | ||||||||||||||||||||
| TospfTable | 1.3.6.1.4.1.42229.1.2.6.12.1 | NA | |||||||||||||||||||
table · not-accessible · current OSPF protocol. | |||||||||||||||||||||
| RospfEntry | 1.3.6.1.4.1.42229.1.2.6.12.1.1 | NA | |||||||||||||||||||
| CospfRouterId | 1.3.6.1.4.1.42229.1.2.6.12.1.1.1 | IetfYangTypesDottedQuad | RO | ||||||||||||||||||
column · IetfYangTypesDottedQuad · read-only · current OSPF Router ID. | |||||||||||||||||||||
| CospfDescription | 1.3.6.1.4.1.42229.1.2.6.12.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Textual description of the OSPF instance. | |||||||||||||||||||||
| CospfAsbr | 1.3.6.1.4.1.42229.1.2.6.12.1.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current OSPF Autonomous System Boundary Router. default value :true | |||||||||||||||||||||
| CospfAdminStatus | 1.3.6.1.4.1.42229.1.2.6.12.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CospfOperStatus | 1.3.6.1.4.1.42229.1.2.6.12.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CospfAliasName | 1.3.6.1.4.1.42229.1.2.6.12.1.1.6 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| NospfArea | 1.3.6.1.4.1.42229.1.2.6.13 | ||||||||||||||||||||
| TospfAreaTable | 1.3.6.1.4.1.42229.1.2.6.13.1 | NA | |||||||||||||||||||
table · not-accessible · current Configuration of ospf area. | |||||||||||||||||||||
| RospfAreaEntry | 1.3.6.1.4.1.42229.1.2.6.13.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of ospfAreaTable | |||||||||||||||||||||
| CospfAreaId | 1.3.6.1.4.1.42229.1.2.6.13.1.1.1 | IetfYangTypesDottedQuad (SIZE (1..64)) | RO | ||||||||||||||||||
column · IetfYangTypesDottedQuad (SIZE (1..64)) · read-only · current OSPF Router Area ID. | |||||||||||||||||||||
| CospfAreaAdminStatus | 1.3.6.1.4.1.42229.1.2.6.13.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CospfAreaOperStatus | 1.3.6.1.4.1.42229.1.2.6.13.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
| |||||||||||||||||||||
| CospfAreaAliasName | 1.3.6.1.4.1.42229.1.2.6.13.1.1.4 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| CospfAreaType | 1.3.6.1.4.1.42229.1.2.6.13.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current OSPF Router Area Type. default value :normal
| |||||||||||||||||||||
| NospfInterface | 1.3.6.1.4.1.42229.1.2.6.14 | ||||||||||||||||||||
| TospfInterfaceTable | 1.3.6.1.4.1.42229.1.2.6.14.1 | NA | |||||||||||||||||||
table · not-accessible · current Configuration of interface in an ospf area. | |||||||||||||||||||||
| RospfInterfaceEntry | 1.3.6.1.4.1.42229.1.2.6.14.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of ospfInterfaceTable | |||||||||||||||||||||
| CospfInterfaceOspfIfName | 1.3.6.1.4.1.42229.1.2.6.14.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current Reference of the interface in OSPF area. | |||||||||||||||||||||
| CospfInterfaceOspfLinkpf | 1.3.6.1.4.1.42229.1.2.6.14.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Reference of the ospf link profile associated with the interface. | |||||||||||||||||||||
| CospfInterfaceOspfCost | 1.3.6.1.4.1.42229.1.2.6.14.1.1.3 | Unsigned32 (0..65535) | RO | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-only · current OSPF link cost. | |||||||||||||||||||||
| CospfInterfaceOspfIfRouting | 1.3.6.1.4.1.42229.1.2.6.14.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies if Routing is enabled and if so, if Routing is passive or active. ACTIVE - This link is advertised and routing messages are transported over this link. PASSIVE - This link is advertised, routing messages are not transported over this link. default value :active
| |||||||||||||||||||||
| CospfInterfaceOspfNetworkType | 1.3.6.1.4.1.42229.1.2.6.14.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current OSPF Interface Network Types.
| |||||||||||||||||||||
| NospfAdjacency | 1.3.6.1.4.1.42229.1.2.6.15 | ||||||||||||||||||||
| TospfAdjacencyTable | 1.3.6.1.4.1.42229.1.2.6.15.1 | NA | |||||||||||||||||||
table · not-accessible · current attributes of OSPF adjacency. | |||||||||||||||||||||
| RospfAdjacencyEntry | 1.3.6.1.4.1.42229.1.2.6.15.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of ospfAdjacencyTable | |||||||||||||||||||||
| CospfAdjacencyOspfNeighborAddress | 1.3.6.1.4.1.42229.1.2.6.15.1.1.1 | IetfInetTypesIpv4Address (SIZE (1..64)) | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Address (SIZE (1..64)) · read-only · current neighbor IP address of the OSPF adjacency. | |||||||||||||||||||||
| CospfAdjacencyNeighborRouterId | 1.3.6.1.4.1.42229.1.2.6.15.1.1.2 | IetfYangTypesDottedQuad | RO | ||||||||||||||||||
column · IetfYangTypesDottedQuad · read-only · current OSPF neighbor Router ID. | |||||||||||||||||||||
| CospfAdjacencyOspfAdjStatus | 1.3.6.1.4.1.42229.1.2.6.15.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current OSPF adjacency status.
| |||||||||||||||||||||
| Nrib | 1.3.6.1.4.1.42229.1.2.6.16 | ||||||||||||||||||||
| TribTable | 1.3.6.1.4.1.42229.1.2.6.16.1 | NA | |||||||||||||||||||
table · not-accessible · current Each entry represents a RIB identified by the 'name' key. All routes in a RIB MUST belong to the same address family. For each routing instance, an implementation SHOULD provide one system-controlled default RIB for each supported address family. | |||||||||||||||||||||
| RribEntry | 1.3.6.1.4.1.42229.1.2.6.16.1.1 | NA | |||||||||||||||||||
| CribName | 1.3.6.1.4.1.42229.1.2.6.16.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The name of the RIB. | |||||||||||||||||||||
| CribAddressFamily | 1.3.6.1.4.1.42229.1.2.6.16.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Address family.
| |||||||||||||||||||||
| CribDefaultRib | 1.3.6.1.4.1.42229.1.2.6.16.1.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current This flag has the value of 'true' if and only if the RIB is the default RIB for the given address family. A default RIB always receives direct routes. By default it also receives routes from all routing protocols. default value :true | |||||||||||||||||||||
| CribDescription | 1.3.6.1.4.1.42229.1.2.6.16.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Textual description of the RIB. | |||||||||||||||||||||
| Nroute | 1.3.6.1.4.1.42229.1.2.6.17 | ||||||||||||||||||||
| TrouteTable | 1.3.6.1.4.1.42229.1.2.6.17.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of static routes. | |||||||||||||||||||||
| RrouteEntry | 1.3.6.1.4.1.42229.1.2.6.17.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of routeTable | |||||||||||||||||||||
| CrouteSourceProtocol | 1.3.6.1.4.1.42229.1.2.6.17.1.1.1 | CoriantTypesSourceProtocol | RO | ||||||||||||||||||
column · CoriantTypesSourceProtocol · read-only · current Type of the routing protocol from which the route originated. | |||||||||||||||||||||
| CrouteDestinationPrefix | 1.3.6.1.4.1.42229.1.2.6.17.1.1.2 | IetfInetTypesIpv4Prefix (SIZE (1..64)) | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Prefix (SIZE (1..64)) · read-only · current IPv4 destination prefix. | |||||||||||||||||||||
| CrouteDescription | 1.3.6.1.4.1.42229.1.2.6.17.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Textual description of the route. | |||||||||||||||||||||
| CroutePreference | 1.3.6.1.4.1.42229.1.2.6.17.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This route attribute, also known as administrative distance, allows for selecting the preferred route among routes with the same destination prefix. A smaller value means a more preferred route. | |||||||||||||||||||||
| CrouteActive | 1.3.6.1.4.1.42229.1.2.6.17.1.1.5 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates that the route is preferred among all routes in the same RIB that have the same destination prefix. | |||||||||||||||||||||
| Nprofiles | 1.3.6.1.4.1.42229.1.2.6.18 | ||||||||||||||||||||
| NpppProfile | 1.3.6.1.4.1.42229.1.2.6.18.1 | ||||||||||||||||||||
| TpppProfileTable | 1.3.6.1.4.1.42229.1.2.6.18.1.1 | NA | |||||||||||||||||||
table · not-accessible · current Profile for the point-to-point interface. | |||||||||||||||||||||
| RpppProfileEntry | 1.3.6.1.4.1.42229.1.2.6.18.1.1.1 | NA | |||||||||||||||||||
| CpppProfilePppPfName | 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.1 | OCTET STRING (SIZE (1..63)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..63)) · read-only · current The name of the point-to-point protocol profile. | |||||||||||||||||||||
| CpppProfilePppFcsLength | 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies whether the frame check sequence is a 16-bit or 32-bit value. default value :16
| |||||||||||||||||||||
| CpppProfilePppMru | 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.3 | Unsigned32 (64..1500) | RO | ||||||||||||||||||
column · Unsigned32 (64..1500) · read-only · current Specifies the maximum number of octets in the Information and Padding fields. UNITS:octets default value :1500 | |||||||||||||||||||||
| CpppProfilePppRestartTimer | 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.4 | Unsigned32 (1..10) | RO | ||||||||||||||||||
column · Unsigned32 (1..10) · read-only · current Specifies the restart timer of the PPP protocol in seconds. UNITS:seconds default value :3 | |||||||||||||||||||||
| CpppProfilePppMaxFailure | 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.5 | Unsigned32 (2..10) | RO | ||||||||||||||||||
column · Unsigned32 (2..10) · read-only · current Specifies the maximum failure value of the PPP protocol profile. default value :5 | |||||||||||||||||||||
| NospfLinkProfile | 1.3.6.1.4.1.42229.1.2.6.18.2 | ||||||||||||||||||||
| TospfLinkProfileTable | 1.3.6.1.4.1.42229.1.2.6.18.2.1 | NA | |||||||||||||||||||
table · not-accessible · current Profile for the OSPF protocol link. | |||||||||||||||||||||
| RospfLinkProfileEntry | 1.3.6.1.4.1.42229.1.2.6.18.2.1.1 | NA | |||||||||||||||||||
| CospfLinkProfileOspfLinkpfName | 1.3.6.1.4.1.42229.1.2.6.18.2.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The name of the OSPF protocol link profile. | |||||||||||||||||||||
| CospfLinkProfileHelloInterval | 1.3.6.1.4.1.42229.1.2.6.18.2.1.1.2 | Unsigned32 (1..255) | RO | ||||||||||||||||||
column · Unsigned32 (1..255) · read-only · current Specifies the Hello Interval in seconds. UNITS:seconds default value :10 | |||||||||||||||||||||
| CospfLinkProfileRouterDeadInterval | 1.3.6.1.4.1.42229.1.2.6.18.2.1.1.3 | Unsigned32 (4..1024) | RO | ||||||||||||||||||
column · Unsigned32 (4..1024) · read-only · current Specifies the Router Dead Interval in seconds. UNITS:seconds default value :40 | |||||||||||||||||||||
| CospfLinkProfileRetransmissionInterval | 1.3.6.1.4.1.42229.1.2.6.18.2.1.1.4 | Unsigned32 (1..255) | RO | ||||||||||||||||||
column · Unsigned32 (1..255) · read-only · current Specifies the Retransmission Interval in seconds. UNITS:seconds default value :5 | |||||||||||||||||||||
| Noscx | 1.3.6.1.4.1.42229.1.2.6.19 | ||||||||||||||||||||
| ToscxTable | 1.3.6.1.4.1.42229.1.2.6.19.1 | NA | |||||||||||||||||||
table · not-accessible · current OSCX (Optical Supervisory Channel Extended) interface | |||||||||||||||||||||
| RoscxEntry | 1.3.6.1.4.1.42229.1.2.6.19.1.1 | NA | |||||||||||||||||||
| CoscxChannel | 1.3.6.1.4.1.42229.1.2.6.19.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies the OSCX channel within the Optical Supervisory Channel.
| |||||||||||||||||||||
| CoscxResourceRef | 1.3.6.1.4.1.42229.1.2.6.19.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Reference of the lower layer resource associated with this interface. | |||||||||||||||||||||
| CoscxAliasName | 1.3.6.1.4.1.42229.1.2.6.19.1.1.3 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current User defined alias for this entity. Must be an alphanumeric string with dash or underscore | |||||||||||||||||||||
| Nsecurity | 1.3.6.1.4.1.42229.1.2.7 | ||||||||||||||||||||
| NsecurityInfo | 1.3.6.1.4.1.42229.1.2.7.1 | ||||||||||||||||||||
| SsecuritySshPublicKey | 1.3.6.1.4.1.42229.1.2.7.1.1 | OCTET STRING (SIZE (0..2500)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..2500)) · read-only · current The system's public key for use with SSH or SFTP.This is a leaf list, encode by some leafs. | |||||||||||||||||||||
| SsecuritySshPublicKeyFingerprint | 1.3.6.1.4.1.42229.1.2.7.1.2 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..256)) · read-only · current The fingerprint of the system's public key.This is a leaf list, encode by some leafs. | |||||||||||||||||||||
| SsecurityPreLoginMessage | 1.3.6.1.4.1.42229.1.2.7.1.3 | OCTET STRING (SIZE (0..1440)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..1440)) · read-only · current Welcome message displayed before user login default value :****************************************** Warning ****************************************** This system is restricted to authorized users for business purposes. Unauthorized access is a violation of the law. This service may be monitored for administrative and security reasons. By proceeding, you consent to this monitoring. ********************************************************************************************* | |||||||||||||||||||||
| SsecurityWarningMessage | 1.3.6.1.4.1.42229.1.2.7.1.4 | OCTET STRING (SIZE (0..1440)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..1440)) · read-only · current Welcome message displayed after user login default value :****************************************** Warning ****************************************** This system is restricted to authorized users for business purposes. Unauthorized access is a violation of the law. This service may be monitored for administrative and security reasons. By proceeding, you consent to this monitoring. ********************************************************************************************* | |||||||||||||||||||||
| SsecurityAaaAuthenticationMethod | 1.3.6.1.4.1.42229.1.2.7.1.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current specify authentication method for the user login to the NE. default value :local-only
| |||||||||||||||||||||
| SsecuritySystemFips | 1.3.6.1.4.1.42229.1.2.7.1.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current specifies whether the system security is operating in compliance with FIPS. default value :disabled
| |||||||||||||||||||||
| SsecurityHttpSupport | 1.3.6.1.4.1.42229.1.2.7.1.7 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
scalar · CoriantTypesEnableSwitch · read-only · current Defines whether unsecure HTTP protocol is allowed; includes file transfer, or any other application that uses HTTP default value :disabled | |||||||||||||||||||||
| Nuser | 1.3.6.1.4.1.42229.1.2.7.2 | ||||||||||||||||||||
| TuserTable | 1.3.6.1.4.1.42229.1.2.7.2.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RuserEntry | 1.3.6.1.4.1.42229.1.2.7.2.1.1 | NA | |||||||||||||||||||
| CuserName | 1.3.6.1.4.1.42229.1.2.7.2.1.1.1 | CoriantTypesUserName | RO | ||||||||||||||||||
column · CoriantTypesUserName · read-only · current User name. | |||||||||||||||||||||
| CuserPassword | 1.3.6.1.4.1.42229.1.2.7.2.1.1.2 | OCTET STRING (SIZE (8..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (8..32)) · read-only · current The password of the user. | |||||||||||||||||||||
| CuserClass | 1.3.6.1.4.1.42229.1.2.7.2.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The access class for the user. default value :supervision
| |||||||||||||||||||||
| CuserMaxInvalidLogin | 1.3.6.1.4.1.42229.1.2.7.2.1.1.4 | Unsigned32 (0..9) | RO | ||||||||||||||||||
column · Unsigned32 (0..9) · read-only · current This attribute is the maximum number of consecutive and invalid login attempts before an account is suspended (lockedout). default value :3 | |||||||||||||||||||||
| CuserSuspensionTime | 1.3.6.1.4.1.42229.1.2.7.2.1.1.5 | Unsigned32 (0..300) | RO | ||||||||||||||||||
column · Unsigned32 (0..300) · read-only · current This attribute is the duration of UID suspension following consecutive invalid login attempts. Setting the value to 0 disables this attribute. UNITS:seconds default value :60 | |||||||||||||||||||||
| CuserTimeout | 1.3.6.1.4.1.42229.1.2.7.2.1.1.6 | Unsigned32 (0..300) | RO | ||||||||||||||||||
column · Unsigned32 (0..300) · read-only · current This attribute is the Session Time Out Interval. If there are no messages between the user and the NE over the Time Out interval, the session is logged off. Setting the value to 0 disables this attribute (meaning the session will not time out). UNITS:minutes default value :30 | |||||||||||||||||||||
| CuserPasswordAgingInterval | 1.3.6.1.4.1.42229.1.2.7.2.1.1.7 | Unsigned32 (0..365) | RO | ||||||||||||||||||
column · Unsigned32 (0..365) · read-only · current This attribute is the Password Aging Interval. Setting the value to 0 disables this attribute. UNITS:days default value :0 | |||||||||||||||||||||
| CuserPasswordExpirationDate | 1.3.6.1.4.1.42229.1.2.7.2.1.1.8 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current This attribute shows the password expiration date. | |||||||||||||||||||||
| CuserAdminStatus | 1.3.6.1.4.1.42229.1.2.7.2.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The attribute allows administrators to modify the user administration status. default value :enabled
| |||||||||||||||||||||
| CuserStatus | 1.3.6.1.4.1.42229.1.2.7.2.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This attribute shows the user status. User with status 'enabled' will have access to the system. User with status 'disabled' not have access to the system. User with status 'password-aged' will have access to the system but will be forced to change his password on first-time login. User with status 'lockout' means the account is locked out due to unsuccessful login attempts. default value :disabled
| |||||||||||||||||||||
| CuserMaxSessions | 1.3.6.1.4.1.42229.1.2.7.2.1.1.11 | Unsigned32 (1..20) | RO | ||||||||||||||||||
column · Unsigned32 (1..20) · read-only · current This attribute specifies the maximum number of sessions allowed for this user. default value :6 | |||||||||||||||||||||
| CuserLastLoginDate | 1.3.6.1.4.1.42229.1.2.7.2.1.1.12 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The last login date/time of the user. default value :1970-01-01T00:00:00Z | |||||||||||||||||||||
| CuserAaaType | 1.3.6.1.4.1.42229.1.2.7.2.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the authentication method of the user. default value :local
| |||||||||||||||||||||
| Nsession | 1.3.6.1.4.1.42229.1.2.7.3 | ||||||||||||||||||||
| TsessionTable | 1.3.6.1.4.1.42229.1.2.7.3.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RsessionEntry | 1.3.6.1.4.1.42229.1.2.7.3.1.1 | NA | |||||||||||||||||||
| CsessionId | 1.3.6.1.4.1.42229.1.2.7.3.1.1.1 | CoriantTypesSessionId | RO | ||||||||||||||||||
column · CoriantTypesSessionId · read-only · current Specifies a unique identifier of the current session. It indicates the IP address and transport layer port number associated with this session. If the session is initiated from the serial port, the value is 'NA'. | |||||||||||||||||||||
| CsessionUser | 1.3.6.1.4.1.42229.1.2.7.3.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Points to a user instance. | |||||||||||||||||||||
| CsessionType | 1.3.6.1.4.1.42229.1.2.7.3.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Session type.
| |||||||||||||||||||||
| CsessionProtocol | 1.3.6.1.4.1.42229.1.2.7.3.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates which protocol has been used to establish the session.
| |||||||||||||||||||||
| CsessionCreatedTime | 1.3.6.1.4.1.42229.1.2.7.3.1.1.5 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The timestamp the user has created this session. | |||||||||||||||||||||
| NaaaServer | 1.3.6.1.4.1.42229.1.2.7.4 | ||||||||||||||||||||
| TaaaServerTable | 1.3.6.1.4.1.42229.1.2.7.4.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RaaaServerEntry | 1.3.6.1.4.1.42229.1.2.7.4.1.1 | NA | |||||||||||||||||||
| CaaaServerServerName | 1.3.6.1.4.1.42229.1.2.7.4.1.1.1 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current specify the name of aaa server. | |||||||||||||||||||||
| CaaaServerServerPriority | 1.3.6.1.4.1.42229.1.2.7.4.1.1.2 | Unsigned32 (1..10) | RO | ||||||||||||||||||
column · Unsigned32 (1..10) · read-only · current This is used to sort the servers in the order of precedence. | |||||||||||||||||||||
| CaaaServerProtocolSupported | 1.3.6.1.4.1.42229.1.2.7.4.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current specify the protocol used for AAA. default value :TACACSPLUS
| |||||||||||||||||||||
| CaaaServerServerIp | 1.3.6.1.4.1.42229.1.2.7.4.1.1.4 | IetfInetTypesIpv4Address | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Address · read-only · current The IPv4 address of AAA server. | |||||||||||||||||||||
| CaaaServerServerPort | 1.3.6.1.4.1.42229.1.2.7.4.1.1.5 | IetfInetTypesPortNumber | RO | ||||||||||||||||||
column · IetfInetTypesPortNumber · read-only · current AAA server port number. default value :49 | |||||||||||||||||||||
| CaaaServerSharedSecret | 1.3.6.1.4.1.42229.1.2.7.4.1.1.6 | OCTET STRING (SIZE (0..100)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..100)) · read-only · current The shared secret of the aaa server. The shared secret will be displayed as *. default value :sharedkey | |||||||||||||||||||||
| CaaaServerRoleSupported | 1.3.6.1.4.1.42229.1.2.7.4.1.1.7 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current specify the role of the server for AAA. default value :authentication authorization
| |||||||||||||||||||||
| CaaaServerAdminStatus | 1.3.6.1.4.1.42229.1.2.7.4.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifes the permission to use or prohibition against using the resource. The administrative state can be modified by the user. default value :up
| |||||||||||||||||||||
| CaaaServerTimeOut | 1.3.6.1.4.1.42229.1.2.7.4.1.1.9 | Unsigned32 (1..60) | RO | ||||||||||||||||||
column · Unsigned32 (1..60) · read-only · current Specifies the response timeout of Access-Request messages sent to a AAA server in seconds. UNITS:seconds default value :5 | |||||||||||||||||||||
| CaaaServerRetry | 1.3.6.1.4.1.42229.1.2.7.4.1.1.10 | Unsigned32 (1..10) | RO | ||||||||||||||||||
column · Unsigned32 (1..10) · read-only · current Specifies the number of attempted Access-Request messages to a single AAA server before failing authentication. default value :3 | |||||||||||||||||||||
| NkeySyncSession | 1.3.6.1.4.1.42229.1.2.7.5 | ||||||||||||||||||||
| TkeySyncSessionTable | 1.3.6.1.4.1.42229.1.2.7.5.1 | NA | |||||||||||||||||||
table · not-accessible · current TLS session to synchronize ODU encryption key. | |||||||||||||||||||||
| RkeySyncSessionEntry | 1.3.6.1.4.1.42229.1.2.7.5.1.1 | NA | |||||||||||||||||||
| CkeySyncSessionId | 1.3.6.1.4.1.42229.1.2.7.5.1.1.1 | Unsigned32 (1..65535) | RO | ||||||||||||||||||
column · Unsigned32 (1..65535) · read-only · current Specifies a unique identifier of the key synchronization session. | |||||||||||||||||||||
| CkeySyncSessionAdminStatus | 1.3.6.1.4.1.42229.1.2.7.5.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
| |||||||||||||||||||||
| CkeySyncSessionSessionStatus | 1.3.6.1.4.1.42229.1.2.7.5.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating the status of key sync session.
| |||||||||||||||||||||
| CkeySyncSessionRemoteIp | 1.3.6.1.4.1.42229.1.2.7.5.1.1.5 | IetfInetTypesIpv4Address | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Address · read-only · current The IP address of remote session server. | |||||||||||||||||||||
| CkeySyncSessionRemotePort | 1.3.6.1.4.1.42229.1.2.7.5.1.1.6 | IetfInetTypesPortNumber | RO | ||||||||||||||||||
column · IetfInetTypesPortNumber · read-only · current The port number of remote session server. default value :8443 | |||||||||||||||||||||
| CkeySyncSessionLocalIp | 1.3.6.1.4.1.42229.1.2.7.5.1.1.7 | IetfInetTypesIpv4Address | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Address · read-only · current The source IP address of a manual session. | |||||||||||||||||||||
| CkeySyncSessionLocalPort | 1.3.6.1.4.1.42229.1.2.7.5.1.1.8 | IetfInetTypesPortNumber | RO | ||||||||||||||||||
column · IetfInetTypesPortNumber · read-only · current The source port number of a manual session. | |||||||||||||||||||||
| CkeySyncSessionSourceAddressFrom | 1.3.6.1.4.1.42229.1.2.7.5.1.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current specifies the interface of the source IP address of the outgoing packets. Conditions:../key-sync-session-type = 'manual' default value :auto | |||||||||||||||||||||
| CkeySyncSessionConnectedTime | 1.3.6.1.4.1.42229.1.2.7.5.1.1.10 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current The timestamp the user has created this session. | |||||||||||||||||||||
| CkeySyncSessionType | 1.3.6.1.4.1.42229.1.2.7.5.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating the type of key sync session, 'manual' is for the session user configured, and 'auto' is for the session automatically created by system. default value :manual
| |||||||||||||||||||||
| CkeySyncSessionAuthType | 1.3.6.1.4.1.42229.1.2.7.5.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicating the authentication type of the key sync session. default value :proprietary-psk
| |||||||||||||||||||||
| CkeySyncSessionLocalCertificate | 1.3.6.1.4.1.42229.1.2.7.5.1.1.13 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Previously installed certificate that authenticates the NE. default value :none | |||||||||||||||||||||
| NpskMap | 1.3.6.1.4.1.42229.1.2.7.7 | ||||||||||||||||||||
| TpskMapTable | 1.3.6.1.4.1.42229.1.2.7.7.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RpskMapEntry | 1.3.6.1.4.1.42229.1.2.7.7.1.1 | NA | |||||||||||||||||||
| CpskMapPskIdentity | 1.3.6.1.4.1.42229.1.2.7.7.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The PSK identity encoded as a UTF-8 string. For details how certain common PSK identity formats can be encoded in UTF-8, see section 5.1. of RFC 4279. | |||||||||||||||||||||
| CpskMapKey | 1.3.6.1.4.1.42229.1.2.7.7.1.1.2 | IetfYangTypesHexString | RO | ||||||||||||||||||
column · IetfYangTypesHexString · read-only · current The key associated with the PSK identity | |||||||||||||||||||||
| CpskMapPskStatus | 1.3.6.1.4.1.42229.1.2.7.7.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status of the psk-map. psk-map can be updated only if psk-status is in init or sync status; the previous psk-map updating can be cancelled only if psk-satus is updating; psk-map cannot be updated and previous psk-map updating cannot be cancelled if psk-status is candidate-key-authenticate. default value :init
| |||||||||||||||||||||
| CpskMapPskInfo | 1.3.6.1.4.1.42229.1.2.7.7.1.1.5 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The label of the psk-map. default value : | |||||||||||||||||||||
| CpskMapWarningTimer | 1.3.6.1.4.1.42229.1.2.7.7.1.1.6 | Unsigned32 (1..240) | RO | ||||||||||||||||||
column · Unsigned32 (1..240) · read-only · current Warning Time before psk-map updating completes. UNITS:minutes default value :5 | |||||||||||||||||||||
| CpskMapCriticalTimer | 1.3.6.1.4.1.42229.1.2.7.7.1.1.7 | Unsigned32 (1..480) | RO | ||||||||||||||||||
column · Unsigned32 (1..480) · read-only · current Critical time before psk-map updating completes. UNITS:minutes default value :30 | |||||||||||||||||||||
| CpskMapTrafficOffTimer | 1.3.6.1.4.1.42229.1.2.7.7.1.1.8 | Unsigned32 (1..1440) | RO | ||||||||||||||||||
column · Unsigned32 (1..1440) · read-only · current Traffic off time before psk-map updating completes. UNITS:minutes default value :1440 | |||||||||||||||||||||
| CpskMapEffectiveTimestamp | 1.3.6.1.4.1.42229.1.2.7.7.1.1.9 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current Indicates the Time of new psk starts to take effect. | |||||||||||||||||||||
| Nkey | 1.3.6.1.4.1.42229.1.2.7.9 | ||||||||||||||||||||
| TkeyTable | 1.3.6.1.4.1.42229.1.2.7.9.1 | NA | |||||||||||||||||||
table · not-accessible · current A key maintained by the keystore. | |||||||||||||||||||||
| RkeyEntry | 1.3.6.1.4.1.42229.1.2.7.9.1.1 | NA | |||||||||||||||||||
| CkeyName | 1.3.6.1.4.1.42229.1.2.7.9.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current An arbitrary name for the key. | |||||||||||||||||||||
| CkeyAlgorithmIdentifier | 1.3.6.1.4.1.42229.1.2.7.9.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Identifies which algorithm is to be used with the key. This value determines how the 'private-key' and 'public-key' fields are interpreted.
| |||||||||||||||||||||
| CkeyPublicKey | 1.3.6.1.4.1.42229.1.2.7.9.1.1.3 | OCTET STRING (SIZE (0..2500)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..2500)) · read-only · current A binary string that contains the value of the public key. The interpretation of the content is defined in the registration of the key algorithm. For example, a DSA key is an INTEGER, an RSA key is represented as RSAPublicKey as defined in [RFC3447], and an Elliptic Curve Cryptography (ECC) key is represented using the 'publicKey' described in [RFC5915] | |||||||||||||||||||||
| Ncertificate | 1.3.6.1.4.1.42229.1.2.7.10 | ||||||||||||||||||||
| TcertificateTable | 1.3.6.1.4.1.42229.1.2.7.10.1 | NA | |||||||||||||||||||
table · not-accessible · current A certificate for this private key. | |||||||||||||||||||||
| RcertificateEntry | 1.3.6.1.4.1.42229.1.2.7.10.1.1 | NA | |||||||||||||||||||
| CcertificateName | 1.3.6.1.4.1.42229.1.2.7.10.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current An arbitrary name for the certificate. The name must be a unique across all keys, not just within this key. | |||||||||||||||||||||
| CcertificateVersion | 1.3.6.1.4.1.42229.1.2.7.10.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current version of the certificate. default value :x509v1
| |||||||||||||||||||||
| CcertificateSerialNumber | 1.3.6.1.4.1.42229.1.2.7.10.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current serial number of the certificate. | |||||||||||||||||||||
| CcertificateSignatureAlgorithm | 1.3.6.1.4.1.42229.1.2.7.10.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current signature algorithm of the certificate. | |||||||||||||||||||||
| CcertificateIssuer | 1.3.6.1.4.1.42229.1.2.7.10.1.1.5 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current issuer of the certificate. | |||||||||||||||||||||
| CcertificateValidFrom | 1.3.6.1.4.1.42229.1.2.7.10.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current valid-from date and time of the certificate. | |||||||||||||||||||||
| CcertificateValidTo | 1.3.6.1.4.1.42229.1.2.7.10.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current valid-to date and time of the certificate. | |||||||||||||||||||||
| CcertificateSubject | 1.3.6.1.4.1.42229.1.2.7.10.1.1.8 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current subject of the certificate. | |||||||||||||||||||||
| CcertificatePublicKeyAlgorithm | 1.3.6.1.4.1.42229.1.2.7.10.1.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current public-key-algorithm of the certificate. | |||||||||||||||||||||
| NtrustedCertificateGroup | 1.3.6.1.4.1.42229.1.2.7.11 | ||||||||||||||||||||
| TtrustedCertificateGroupTable | 1.3.6.1.4.1.42229.1.2.7.11.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of trusted certificates. These certificates can be used by a server to authenticate clients, or by clients to authenticate servers. The certificates may be endpoint specific or for certificate authorities, to authenticate many clients at once. Each list of certificates SHOULD be specific to a purpose, as the list as a whole may be referenced by other modules. For instance, a NETCONF server model might point to a list of certificates to use when authenticating client certificates. | |||||||||||||||||||||
| RtrustedCertificateGroupEntry | 1.3.6.1.4.1.42229.1.2.7.11.1.1 | NA | |||||||||||||||||||
| CtrustedCertificateGroupName | 1.3.6.1.4.1.42229.1.2.7.11.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current An arbitrary name for this list of trusted certificates. | |||||||||||||||||||||
| NtrustedCertificate | 1.3.6.1.4.1.42229.1.2.7.12 | ||||||||||||||||||||
| TtrustedCertificateTable | 1.3.6.1.4.1.42229.1.2.7.12.1 | NA | |||||||||||||||||||
table · not-accessible · current A trusted certificate for a specific use. Note, this 'certificate' is a list in order to encode any associated intermediate certificates. | |||||||||||||||||||||
| RtrustedCertificateEntry | 1.3.6.1.4.1.42229.1.2.7.12.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of trustedCertificateTable | |||||||||||||||||||||
| CtrustedCertificateName | 1.3.6.1.4.1.42229.1.2.7.12.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current An arbitrary name for this trusted certificate. Must be unique across all lists of trusted certificates (not just this list) so that a leafref to it from another module can resolve to unique values. | |||||||||||||||||||||
| CtrustedCertificateVersion | 1.3.6.1.4.1.42229.1.2.7.12.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current version of the certificate. default value :x509v1
| |||||||||||||||||||||
| CtrustedCertificateSerialNumber | 1.3.6.1.4.1.42229.1.2.7.12.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current serial number of the certificate. | |||||||||||||||||||||
| CtrustedCertificateSignatureAlgorithm | 1.3.6.1.4.1.42229.1.2.7.12.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current signature algorithm of the certificate. | |||||||||||||||||||||
| CtrustedCertificateIssuer | 1.3.6.1.4.1.42229.1.2.7.12.1.1.5 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current issuer of the certificate. | |||||||||||||||||||||
| CtrustedCertificateValidFrom | 1.3.6.1.4.1.42229.1.2.7.12.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current valid-from date and time of the certificate. | |||||||||||||||||||||
| CtrustedCertificateValidTo | 1.3.6.1.4.1.42229.1.2.7.12.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current valid-to date and time of the certificate. | |||||||||||||||||||||
| CtrustedCertificateSubject | 1.3.6.1.4.1.42229.1.2.7.12.1.1.8 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current subject of the certificate. | |||||||||||||||||||||
| CtrustedCertificatePublicKeyAlgorithm | 1.3.6.1.4.1.42229.1.2.7.12.1.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current public-key-algorithm of the certificate. | |||||||||||||||||||||
| Nnbi | 1.3.6.1.4.1.42229.1.2.8 | ||||||||||||||||||||
| Nsnmp | 1.3.6.1.4.1.42229.1.2.8.1 | ||||||||||||||||||||
| Nsnmpv3 | 1.3.6.1.4.1.42229.1.2.8.1.1 | ||||||||||||||||||||
| Tsnmpv3Table | 1.3.6.1.4.1.42229.1.2.8.1.1.1 | NA | |||||||||||||||||||
table · not-accessible · current SNMPv3 configuration for user | |||||||||||||||||||||
| Rsnmpv3Entry | 1.3.6.1.4.1.42229.1.2.8.1.1.1.1 | NA | |||||||||||||||||||
| Csnmpv3UserSecLevel | 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies the SNMPv3 user security level. default value :no-auth-no-priv
| |||||||||||||||||||||
| Csnmpv3AuthProtocol | 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies the authentication protocol that the SNMPv3 user being created will use. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv') default value :SHA
| |||||||||||||||||||||
| Csnmpv3AuthPassphrase | 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.3 | OCTET STRING (SIZE (0 | 8..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0 | 8..64)) · read-only · current Specifies the SNMPv3 authentication pass phrase. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv') | |||||||||||||||||||||
| Csnmpv3PrivProtocol | 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies the privacy protocol that the SNMPv3 user being created will use. Conditions:../user-sec-level = 'auth-priv' default value :AES
| |||||||||||||||||||||
| Csnmpv3PrivPassphrase | 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.5 | OCTET STRING (SIZE (0 | 8..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0 | 8..64)) · read-only · current Specifies the SNMPv3 privacy pass phrase. Conditions:../user-sec-level = 'auth-priv' | |||||||||||||||||||||
| NsnmpInfo | 1.3.6.1.4.1.42229.1.2.8.1.2 | ||||||||||||||||||||
| SsnmpEngineId | 1.3.6.1.4.1.42229.1.2.8.1.2.1 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..256)) · read-only · current snmp EngineID of the NE. The EngineID will follow the EngineID format 3 defined in RFC3411. The MAC address in the Engine ID will be the first MAC address of the MAC addresses Pool of the NE. | |||||||||||||||||||||
| NsnmpCommunity | 1.3.6.1.4.1.42229.1.2.8.1.3 | ||||||||||||||||||||
| TsnmpCommunityTable | 1.3.6.1.4.1.42229.1.2.8.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current List of SNMP Community Strings. Please note that the trap-community-string is located in the snmp-target MO. | |||||||||||||||||||||
| RsnmpCommunityEntry | 1.3.6.1.4.1.42229.1.2.8.1.3.1.1 | NA | |||||||||||||||||||
| CsnmpCommunityCommunityString | 1.3.6.1.4.1.42229.1.2.8.1.3.1.1.1 | CoriantTypesSnmpString | RO | ||||||||||||||||||
column · CoriantTypesSnmpString · read-only · current Community String. | |||||||||||||||||||||
| CsnmpCommunityCommunityStringAccess | 1.3.6.1.4.1.42229.1.2.8.1.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current snmp access right of this community string. default value :read-only
| |||||||||||||||||||||
| NsnmpTarget | 1.3.6.1.4.1.42229.1.2.8.1.4 | ||||||||||||||||||||
| TsnmpTargetTable | 1.3.6.1.4.1.42229.1.2.8.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current List of SNMP targets (trap listeners) | |||||||||||||||||||||
| RsnmpTargetEntry | 1.3.6.1.4.1.42229.1.2.8.1.4.1.1 | NA | |||||||||||||||||||
| CsnmpTargetSnmpVersion | 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current snmp version. default value :v2c
| |||||||||||||||||||||
| CsnmpTargetSnmpv3User | 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.2 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Indicate the snmpv3 user. Conditions:../snmp-version = 'v3' | |||||||||||||||||||||
| CsnmpTargetTargetName | 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.3 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current Identifies the SNMP target | |||||||||||||||||||||
| CsnmpTargetTargetIp | 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.4 | IetfInetTypesIpv4Address | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Address · read-only · current IP address of the SNMP target | |||||||||||||||||||||
| CsnmpTargetTargetPort | 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.5 | IetfInetTypesPortNumber | RO | ||||||||||||||||||
column · IetfInetTypesPortNumber · read-only · current UDP port number. default value :162 | |||||||||||||||||||||
| CsnmpTargetTargetTransport | 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Type of transport for the SNMP target default value :udp
| |||||||||||||||||||||
| CsnmpTargetTrapCommunityString | 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.7 | CoriantTypesSnmpString | RO | ||||||||||||||||||
column · CoriantTypesSnmpString · read-only · current Community string used for SNMP traps Conditions:../snmp-version = 'v2c' default value :groove | |||||||||||||||||||||
| Ncli | 1.3.6.1.4.1.42229.1.2.8.2 | ||||||||||||||||||||
| NcliConfig | 1.3.6.1.4.1.42229.1.2.8.2.1 | ||||||||||||||||||||
| TcliConfigTable | 1.3.6.1.4.1.42229.1.2.8.2.1.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RcliConfigEntry | 1.3.6.1.4.1.42229.1.2.8.2.1.1.1 | NA | |||||||||||||||||||
| CcliConfigCliLines | 1.3.6.1.4.1.42229.1.2.8.2.1.1.1.1 | Unsigned32 (10..1000) | RO | ||||||||||||||||||
column · Unsigned32 (10..1000) · read-only · current Number of rows to be used for display. This value is automatically discovered when possible default value :40 | |||||||||||||||||||||
| CcliConfigCliColumns | 1.3.6.1.4.1.42229.1.2.8.2.1.1.1.2 | Unsigned32 (80..4000) | RO | ||||||||||||||||||
column · Unsigned32 (80..4000) · read-only · current Number of columns to be used for display. This value is automatically discovered when possible default value :140 | |||||||||||||||||||||
| CcliConfigMaxHistorySize | 1.3.6.1.4.1.42229.1.2.8.2.1.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Command history maximum size for the current session default value :500 | |||||||||||||||||||||
| CcliConfigInteractiveMode | 1.3.6.1.4.1.42229.1.2.8.2.1.1.1.4 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current This determines if the CLI shall issue interactive prompt (e.g. for prompting additional information, or for confirmation of user initiated actions). Enabled = CLI will prompt user (default) Disabled = CLI will suppress any prompt to the user This parameter is set per CLI session and is not persistent. default value :enabled | |||||||||||||||||||||
| Nrestconf | 1.3.6.1.4.1.42229.1.2.8.3 | ||||||||||||||||||||
| SrestconfRestHttpSupport | 1.3.6.1.4.1.42229.1.2.8.3.1 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
scalar · CoriantTypesEnableSwitch · read-only · current Defines if the HTTP port (8080) is enabled for RESTCONF default value :disabled | |||||||||||||||||||||
| SrestconfRestHttpsSupport | 1.3.6.1.4.1.42229.1.2.8.3.2 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
scalar · CoriantTypesEnableSwitch · read-only · current Defines if the HTTPS port (8181) is enabled for RESTCONF default value :enabled | |||||||||||||||||||||
| SrestconfRestSessionTimeout | 1.3.6.1.4.1.42229.1.2.8.3.3 | Unsigned32 (1..300) | RO | ||||||||||||||||||
scalar · Unsigned32 (1..300) · read-only · current Timeout of a cookie based RESTCONF session. The cookie expiration date is reset every time there is activity on the session. UNITS:minutes default value :5 | |||||||||||||||||||||
| NcliAlias | 1.3.6.1.4.1.42229.1.2.8.4 | ||||||||||||||||||||
| TcliAliasTable | 1.3.6.1.4.1.42229.1.2.8.4.1 | NA | |||||||||||||||||||
table · not-accessible · current List of aliases used in CLI. Can only be accessed via 'alias/unalias' CLI commands. | |||||||||||||||||||||
| RcliAliasEntry | 1.3.6.1.4.1.42229.1.2.8.4.1.1 | NA | |||||||||||||||||||
| CcliAliasName | 1.3.6.1.4.1.42229.1.2.8.4.1.1.1 | OCTET STRING (SIZE (1..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..256)) · read-only · current Name of the alias | |||||||||||||||||||||
| CcliAliasValue | 1.3.6.1.4.1.42229.1.2.8.4.1.1.2 | OCTET STRING (SIZE (1..1024)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..1024)) · read-only · current Value of the alias | |||||||||||||||||||||
| NcliScript | 1.3.6.1.4.1.42229.1.2.8.5 | ||||||||||||||||||||
| TcliScriptTable | 1.3.6.1.4.1.42229.1.2.8.5.1 | NA | |||||||||||||||||||
table · not-accessible · current List of available CLI scripts. Scripts can be executed with the 'run' command | |||||||||||||||||||||
| RcliScriptEntry | 1.3.6.1.4.1.42229.1.2.8.5.1.1 | NA | |||||||||||||||||||
| CcliScriptScriptName | 1.3.6.1.4.1.42229.1.2.8.5.1.1.1 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current File name of the CLI script | |||||||||||||||||||||
| CcliScriptDescription | 1.3.6.1.4.1.42229.1.2.8.5.1.1.2 | OCTET STRING (SIZE (0..256)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..256)) · read-only · current Description of the CLI script | |||||||||||||||||||||
| Nfilesw | 1.3.6.1.4.1.42229.1.2.9 | ||||||||||||||||||||
| Nsoftwareload | 1.3.6.1.4.1.42229.1.2.9.2 | ||||||||||||||||||||
| TsoftwareloadTable | 1.3.6.1.4.1.42229.1.2.9.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of the software loads in the system. | |||||||||||||||||||||
| RsoftwareloadEntry | 1.3.6.1.4.1.42229.1.2.9.2.1.1 | NA | |||||||||||||||||||
| CsoftwareloadSwloadId | 1.3.6.1.4.1.42229.1.2.9.2.1.1.1 | Unsigned32 (1..10) | RO | ||||||||||||||||||
column · Unsigned32 (1..10) · read-only · current software load identifier which is uniquely identify specific software load. | |||||||||||||||||||||
| CsoftwareloadSwloadState | 1.3.6.1.4.1.42229.1.2.9.2.1.1.2 | INTEGER | RO | active(1) | |||||||||||||||||
column · INTEGER · read-only · current Indicates the state of the software load.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsoftwareloadSwloadVersion | 1.3.6.1.4.1.42229.1.2.9.2.1.1.3 | CoriantFileSwTypesSwVersion | RO | FP3.0.3 | |||||||||||||||||
column · CoriantFileSwTypesSwVersion · read-only · current Indicates the software version of the software load. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsoftwareloadSwloadVendor | 1.3.6.1.4.1.42229.1.2.9.2.1.1.4 | CoriantFileSwTypesSwloadVendor | RO | ||||||||||||||||||
column · CoriantFileSwTypesSwloadVendor · read-only · current Vendor information of the software load. | |||||||||||||||||||||
| CsoftwareloadSwloadProduct | 1.3.6.1.4.1.42229.1.2.9.2.1.1.5 | CoriantFileSwTypesSwloadProduct | RO | ||||||||||||||||||
column · CoriantFileSwTypesSwloadProduct · read-only · current Indicates the network element family this software belongs to. | |||||||||||||||||||||
| CsoftwareloadSwloadLabel | 1.3.6.1.4.1.42229.1.2.9.2.1.1.6 | OCTET STRING (SIZE (0..1024)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1024)) · read-only · current The label of the software load including summary information. | |||||||||||||||||||||
| Ndatabase | 1.3.6.1.4.1.42229.1.2.9.3 | ||||||||||||||||||||
| TdatabaseTable | 1.3.6.1.4.1.42229.1.2.9.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The list of the databases in the system. | |||||||||||||||||||||
| RdatabaseEntry | 1.3.6.1.4.1.42229.1.2.9.3.1.1 | NA | |||||||||||||||||||
| CdatabaseId | 1.3.6.1.4.1.42229.1.2.9.3.1.1.1 | Unsigned32 (1..10) | RO | ||||||||||||||||||
column · Unsigned32 (1..10) · read-only · current database identifier which is uniquely identify specific database. | |||||||||||||||||||||
| CdatabaseState | 1.3.6.1.4.1.42229.1.2.9.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the state of the database.
| |||||||||||||||||||||
| CdatabaseVersion | 1.3.6.1.4.1.42229.1.2.9.3.1.1.3 | CoriantFileSwTypesSwVersion | RO | ||||||||||||||||||
column · CoriantFileSwTypesSwVersion · read-only · current Indicates the database version. | |||||||||||||||||||||
| CdatabaseVendor | 1.3.6.1.4.1.42229.1.2.9.3.1.1.4 | CoriantFileSwTypesSwloadVendor | RO | ||||||||||||||||||
column · CoriantFileSwTypesSwloadVendor · read-only · current Vendor information of the database. | |||||||||||||||||||||
| CdatabaseProduct | 1.3.6.1.4.1.42229.1.2.9.3.1.1.5 | CoriantFileSwTypesSwloadProduct | RO | ||||||||||||||||||
column · CoriantFileSwTypesSwloadProduct · read-only · current Indicates the network element family this database belongs to. | |||||||||||||||||||||
| CdatabaseBackupTime | 1.3.6.1.4.1.42229.1.2.9.3.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Indicates the database last backup time. default value : | |||||||||||||||||||||
| NfwVersionMap | 1.3.6.1.4.1.42229.1.2.9.4 | ||||||||||||||||||||
| TfwVersionMapTable | 1.3.6.1.4.1.42229.1.2.9.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The firmware information of the upgradable devices included in the software load. | |||||||||||||||||||||
| RfwVersionMapEntry | 1.3.6.1.4.1.42229.1.2.9.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of fwVersionMapTable | |||||||||||||||||||||
| CfwVersionMapDeviceName | 1.3.6.1.4.1.42229.1.2.9.4.1.1.1 | CoriantFileSwTypesDeviceName | RO | ||||||||||||||||||
column · CoriantFileSwTypesDeviceName · read-only · current Indicates the name of the device. | |||||||||||||||||||||
| CfwVersionMapDeviceFwVersion | 1.3.6.1.4.1.42229.1.2.9.4.1.1.2 | CoriantFileSwTypesDeviceFwVersion | RO | ||||||||||||||||||
column · CoriantFileSwTypesDeviceFwVersion · read-only · current Indicates the version of the firmware. | |||||||||||||||||||||
| NcurrentFwVersion | 1.3.6.1.4.1.42229.1.2.9.5 | ||||||||||||||||||||
| TcurrentFwVersionTable | 1.3.6.1.4.1.42229.1.2.9.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The firmware information of the upgradable devices included in the software load. | |||||||||||||||||||||
| RcurrentFwVersionEntry | 1.3.6.1.4.1.42229.1.2.9.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of currentFwVersionTable | |||||||||||||||||||||
| CcurrentFwVersionEquipmentEntity | 1.3.6.1.4.1.42229.1.2.9.5.1.1.1 | RowPointer | RO | ||||||||||||||||||
column · RowPointer · read-only · current Indicates the entity of the equipment carrying the device. | |||||||||||||||||||||
| CcurrentFwVersionFwEquipmentType | 1.3.6.1.4.1.42229.1.2.9.5.1.1.2 | CoriantTypesEquipmentType | RO | ||||||||||||||||||
column · CoriantTypesEquipmentType · read-only · current Indicates the type of the equipment carrying the device. | |||||||||||||||||||||
| CcurrentFwVersionDeviceName | 1.3.6.1.4.1.42229.1.2.9.5.1.1.3 | CoriantFileSwTypesDeviceName | RO | ||||||||||||||||||
column · CoriantFileSwTypesDeviceName · read-only · current Indicates the name of the device. | |||||||||||||||||||||
| CcurrentFwVersionDeviceFwVersion | 1.3.6.1.4.1.42229.1.2.9.5.1.1.4 | CoriantFileSwTypesDeviceFwVersion | RO | ||||||||||||||||||
column · CoriantFileSwTypesDeviceFwVersion · read-only · current Indicates the version of the firmware. | |||||||||||||||||||||
| CcurrentFwVersionFwState | 1.3.6.1.4.1.42229.1.2.9.5.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates firmware state of the device. Current: indicates the loaded firmware is the version of current software load. Not-current: indicates the loaded firmware is not the version of current software load. default value :not-available
| |||||||||||||||||||||
| NrollbackPoint | 1.3.6.1.4.1.42229.1.2.9.6 | ||||||||||||||||||||
| TrollbackPointTable | 1.3.6.1.4.1.42229.1.2.9.6.1 | NA | |||||||||||||||||||
table · not-accessible · current Represents a rollback point stored in the system. A rollback point represents the system configuration of a specific point in time, that the user may create with the 'create-rollback-point' command, visualize with the 'diff' command' and rollback to with the 'rollback' command. The system is able to store up to 10 rollback-points, rolling over old instances as new ones are created. The incremental IDs of 1..10 are automatically generated by the system whenever the rollback-point is created. Rollback points can be deleted as any normal object. A special 'backup' rollback-point can also be created with ID 0; unlike normal rollback-points, this instance will be kept even after activation with the 'rollback' RPC. | |||||||||||||||||||||
| RrollbackPointEntry | 1.3.6.1.4.1.42229.1.2.9.6.1.1 | NA | |||||||||||||||||||
| CrollbackPointId | 1.3.6.1.4.1.42229.1.2.9.6.1.1.1 | Unsigned32 (0..10) | RO | ||||||||||||||||||
column · Unsigned32 (0..10) · read-only · current Integer ID of the rollback-point. Generated dynamically whenever a rollback-point is created, with range 1 to 100 | |||||||||||||||||||||
| CrollbackPointCreationTime | 1.3.6.1.4.1.42229.1.2.9.6.1.1.2 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
column · IetfYangTypesDateAndTime · read-only · current Timestamp when this rollback-point was created | |||||||||||||||||||||
| CrollbackPointCreationTrigger | 1.3.6.1.4.1.42229.1.2.9.6.1.1.3 | CoriantTypesUserName | RO | ||||||||||||||||||
column · CoriantTypesUserName · read-only · current Describes the author user-name of this rollback-point | |||||||||||||||||||||
| CrollbackPointDescription | 1.3.6.1.4.1.42229.1.2.9.6.1.1.4 | OCTET STRING (SIZE (0..200)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..200)) · read-only · current User defined description of this rollback-point | |||||||||||||||||||||
| CrollbackPointType | 1.3.6.1.4.1.42229.1.2.9.6.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of the rollback-point default value :normal
| |||||||||||||||||||||
| NlogServer | 1.3.6.1.4.1.42229.1.2.9.8 | ||||||||||||||||||||
| TlogServerTable | 1.3.6.1.4.1.42229.1.2.9.8.1 | NA | |||||||||||||||||||
table · not-accessible · current Grouping the configuration parameters for log forwarding. | |||||||||||||||||||||
| RlogServerEntry | 1.3.6.1.4.1.42229.1.2.9.8.1.1 | NA | |||||||||||||||||||
| ClogServerName | 1.3.6.1.4.1.42229.1.2.9.8.1.1.1 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The name for the endpoint to forwarding logs to. | |||||||||||||||||||||
| ClogServerIpAddress | 1.3.6.1.4.1.42229.1.2.9.8.1.1.2 | IetfInetTypesIpv4Address | RO | ||||||||||||||||||
column · IetfInetTypesIpv4Address · read-only · current The leaf uniquely specifies the ipv4 address of the remote host. | |||||||||||||||||||||
| ClogServerTransport | 1.3.6.1.4.1.42229.1.2.9.8.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It is the transport protocol used when forwarding logs. default value :udp
| |||||||||||||||||||||
| ClogServerPort | 1.3.6.1.4.1.42229.1.2.9.8.1.1.4 | IetfInetTypesPortNumber | RO | ||||||||||||||||||
column · IetfInetTypesPortNumber · read-only · current This leaf specifies the port number used to deliver messages to the remote server. default value :514 | |||||||||||||||||||||
| ClogServerDestinationFacilityType | 1.3.6.1.4.1.42229.1.2.9.8.1.1.5 | CoriantTypesEnableSwitch | RO | ||||||||||||||||||
column · CoriantTypesEnableSwitch · read-only · current Switching of the function destination-facility default value :disabled | |||||||||||||||||||||
| ClogServerDestinationFacility | 1.3.6.1.4.1.42229.1.2.9.8.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current This leaf specifies the facility used in messages delivered to the remote server. default value :23 | |||||||||||||||||||||
| NlogFacility | 1.3.6.1.4.1.42229.1.2.9.10 | ||||||||||||||||||||
| TlogFacilityTable | 1.3.6.1.4.1.42229.1.2.9.10.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RlogFacilityEntry | 1.3.6.1.4.1.42229.1.2.9.10.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry of logFacilityTable | |||||||||||||||||||||
| ClogFacilityLogSelectorFacility | 1.3.6.1.4.1.42229.1.2.9.10.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The leaf uniquely identifies a syslog facility for forwarding.
| |||||||||||||||||||||
| ClogFacilityLogSelectorSeverity | 1.3.6.1.4.1.42229.1.2.9.10.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The system log selected severity level for forwarding default value :debug
| |||||||||||||||||||||
| ClogFacilityCompareOp | 1.3.6.1.4.1.42229.1.2.9.10.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This leaf describes the option to specify how the severity comparison is performed. default value :equals-or-higher
| |||||||||||||||||||||
| NtimeManager | 1.3.6.1.4.1.42229.1.2.10 | ||||||||||||||||||||
| NtimeManagerInfo | 1.3.6.1.4.1.42229.1.2.10.1 | ||||||||||||||||||||
| StimeManagerTimezone | 1.3.6.1.4.1.42229.1.2.10.1.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates the Name of the Time Zone of this NE. default value :Greenwich_Mean_Time:Dublin-Edinburgh-Lisbon-London[GMT]
| |||||||||||||||||||||
| StimeManagerCurrentTime | 1.3.6.1.4.1.42229.1.2.10.1.2 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
scalar · IetfYangTypesDateAndTime · read-only · current Indicates the current Date and Time of this NE. | |||||||||||||||||||||
| StimeManagerLastStartTime | 1.3.6.1.4.1.42229.1.2.10.1.3 | IetfYangTypesDateAndTime | RO | ||||||||||||||||||
scalar · IetfYangTypesDateAndTime · read-only · current Indicate the time of last system boot. | |||||||||||||||||||||
| StimeManagerUpTime | 1.3.6.1.4.1.42229.1.2.10.1.4 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Indicate how long the system has been running. | |||||||||||||||||||||
| StimeManagerTimeSourceState | 1.3.6.1.4.1.42229.1.2.10.1.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates the state of the time source.
| |||||||||||||||||||||
| Nntp | 1.3.6.1.4.1.42229.1.2.10.2 | ||||||||||||||||||||
| SntpEnabled | 1.3.6.1.4.1.42229.1.2.10.2.1 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates if NTP is enabled. default value :false | |||||||||||||||||||||
| SntpCurrentTimeSource | 1.3.6.1.4.1.42229.1.2.10.2.2 | IetfInetTypesIpv4AddressNoZone | RO | ||||||||||||||||||
scalar · IetfInetTypesIpv4AddressNoZone · read-only · current Indicates the current time source. default value :0.0.0.0 | |||||||||||||||||||||
| NntpAssociation | 1.3.6.1.4.1.42229.1.2.10.3 | ||||||||||||||||||||
| TntpAssociationTable | 1.3.6.1.4.1.42229.1.2.10.3.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RntpAssociationEntry | 1.3.6.1.4.1.42229.1.2.10.3.1.1 | NA | |||||||||||||||||||
| CntpAssociationSource | 1.3.6.1.4.1.42229.1.2.10.3.1.1.1 | IetfInetTypesIpv4AddressNoZone (SIZE (1..64)) | RO | ||||||||||||||||||
column · IetfInetTypesIpv4AddressNoZone (SIZE (1..64)) · read-only · current Indicates the ntp-association-source. | |||||||||||||||||||||
| CntpAssociationType | 1.3.6.1.4.1.42229.1.2.10.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the ntp association type.
| |||||||||||||||||||||
| CntpAssociationPreferredNtpAssociation | 1.3.6.1.4.1.42229.1.2.10.3.1.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates if this is preferred. | |||||||||||||||||||||
| CntpAssociationNtpAdminState | 1.3.6.1.4.1.42229.1.2.10.3.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The administrative state specifies the permission to use or prohibition against using the resource. default value :up
| |||||||||||||||||||||
| NntpAssociationStatus | 1.3.6.1.4.1.42229.1.2.10.4 | ||||||||||||||||||||
| TntpAssociationStatusTable | 1.3.6.1.4.1.42229.1.2.10.4.1 | NA | |||||||||||||||||||
table · not-accessible · current NULL | |||||||||||||||||||||
| RntpAssociationStatusEntry | 1.3.6.1.4.1.42229.1.2.10.4.1.1 | NA | |||||||||||||||||||
| CntpAssociationStatusNtpAssociationRefid | 1.3.6.1.4.1.42229.1.2.10.4.1.1.1 | OCTET STRING (SIZE (16)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Reference clock type or address for the peer. | |||||||||||||||||||||
| CntpAssociationStatusNtpStratum | 1.3.6.1.4.1.42229.1.2.10.4.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This attribute indicates the stratum of local clock. A value of 0, indicates that Stratum in Unspecified. | |||||||||||||||||||||
| CntpAssociationStatusNtpPollingInterval | 1.3.6.1.4.1.42229.1.2.10.4.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current NTP polling interval. This is an integer number indicating the HOST polling interval between transmitted messages, in seconds. UNITS:seconds | |||||||||||||||||||||
| CntpAssociationStatusNtpPrecision | 1.3.6.1.4.1.42229.1.2.10.4.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current This is an unsigned floating-point number indicating the precision of the various clocks, in milliseconds. UNITS:milliseconds | |||||||||||||||||||||
| CntpAssociationStatusNtpAssociationOffset | 1.3.6.1.4.1.42229.1.2.10.4.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Indicates the offset between the local clock and the superior reference clock. UNITS:milliseconds | |||||||||||||||||||||
| CntpAssociationStatusNtpAssociationReach | 1.3.6.1.4.1.42229.1.2.10.4.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Indicates the reachability of the configured server or peer. | |||||||||||||||||||||
| CntpAssociationStatusNtpAssociationDelay | 1.3.6.1.4.1.42229.1.2.10.4.1.1.7 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Indicates the delay between the local clock and the superior reference clock, in milliseconds. UNITS:milliseconds | |||||||||||||||||||||
| CntpAssociationStatusNtpAssociationDispersion | 1.3.6.1.4.1.42229.1.2.10.4.1.1.8 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Indicates the dispersion between the local clock and the peer clock, in milliseconds. UNITS:milliseconds | |||||||||||||||||||||
| Nztc | 1.3.6.1.4.1.42229.1.2.11 | ||||||||||||||||||||
| NztcInfo | 1.3.6.1.4.1.42229.1.2.11.1 | ||||||||||||||||||||
| SztcEnabled | 1.3.6.1.4.1.42229.1.2.11.1.1 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current enable/disable Zero Touch commissioning. default value :true | |||||||||||||||||||||
| SztcStatus | 1.3.6.1.4.1.42229.1.2.11.1.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Shows the ZTC process status: disabled - ZTC will not be attempted because it was disabled via configuration ready - ZTC will be attempted when able to communicate with external ZTC server ongoing - ZTC is ongoing failed - some problems occurred during ZTC done - ZTC completed successfully. default value :ready
| |||||||||||||||||||||
| Ncommon | 1.3.6.1.4.1.42229.1.2.13 | ||||||||||||||||||||
| NbitErrorRatePreFec | 1.3.6.1.4.1.42229.1.2.13.1 | ||||||||||||||||||||
| TbitErrorRatePreFecTable | 1.3.6.1.4.1.42229.1.2.13.1.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for bit error rate before fec | |||||||||||||||||||||
| RbitErrorRatePreFecEntry | 1.3.6.1.4.1.42229.1.2.13.1.1.1 | NA | |||||||||||||||||||
| CbitErrorRatePreFecInstant | 1.3.6.1.4.1.42229.1.2.13.1.1.1.1 | OCTET STRING | RO | 1.00000000000 | |||||||||||||||||
column · OCTET STRING · read-only · current the instant value of statistics counter UNITS:bit-ratio Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbitErrorRatePreFecAvg | 1.3.6.1.4.1.42229.1.2.13.1.1.1.2 | OCTET STRING | RO | 0.61180616032 | |||||||||||||||||
column · OCTET STRING · read-only · current the average value of statistics counter UNITS:bit-ratio Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbitErrorRatePreFecMin | 1.3.6.1.4.1.42229.1.2.13.1.1.1.3 | OCTET STRING | RO | 0.00000000000 | |||||||||||||||||
column · OCTET STRING · read-only · current the minimum value of statistics counter UNITS:bit-ratio Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbitErrorRatePreFecMax | 1.3.6.1.4.1.42229.1.2.13.1.1.1.4 | OCTET STRING | RO | 1.00000000000 | |||||||||||||||||
column · OCTET STRING · read-only · current the maximum value of statistics counter UNITS:bit-ratio Example values from LibreNMS test devices
| |||||||||||||||||||||
| NbitErrorRatePostFec | 1.3.6.1.4.1.42229.1.2.13.2 | ||||||||||||||||||||
| TbitErrorRatePostFecTable | 1.3.6.1.4.1.42229.1.2.13.2.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for bit error rate post fec | |||||||||||||||||||||
| RbitErrorRatePostFecEntry | 1.3.6.1.4.1.42229.1.2.13.2.1.1 | NA | |||||||||||||||||||
| CbitErrorRatePostFecInstant | 1.3.6.1.4.1.42229.1.2.13.2.1.1.1 | OCTET STRING | RO | 0.000000000 | |||||||||||||||||
column · OCTET STRING · read-only · current the instant value of statistics counter UNITS:bit-ratio Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbitErrorRatePostFecAvg | 1.3.6.1.4.1.42229.1.2.13.2.1.1.2 | OCTET STRING | RO | 0.000000000 | |||||||||||||||||
column · OCTET STRING · read-only · current the average value of statistics counter UNITS:bit-ratio Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbitErrorRatePostFecMin | 1.3.6.1.4.1.42229.1.2.13.2.1.1.3 | OCTET STRING | RO | 0.000000000 | |||||||||||||||||
column · OCTET STRING · read-only · current the minimum value of statistics counter UNITS:bit-ratio Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbitErrorRatePostFecMax | 1.3.6.1.4.1.42229.1.2.13.2.1.1.4 | OCTET STRING | RO | 0.000000000 | |||||||||||||||||
column · OCTET STRING · read-only · current the maximum value of statistics counter UNITS:bit-ratio Example values from LibreNMS test devices
| |||||||||||||||||||||
| NinUtilization | 1.3.6.1.4.1.42229.1.2.13.3 | ||||||||||||||||||||
| TinUtilizationTable | 1.3.6.1.4.1.42229.1.2.13.3.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for RX utilization | |||||||||||||||||||||
| RinUtilizationEntry | 1.3.6.1.4.1.42229.1.2.13.3.1.1 | NA | |||||||||||||||||||
| CinUtilizationInstant | 1.3.6.1.4.1.42229.1.2.13.3.1.1.1 | CoriantTypesPercentage | RO | ||||||||||||||||||
column · CoriantTypesPercentage · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CinUtilizationAvg | 1.3.6.1.4.1.42229.1.2.13.3.1.1.2 | CoriantTypesPercentage | RO | ||||||||||||||||||
column · CoriantTypesPercentage · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CinUtilizationMin | 1.3.6.1.4.1.42229.1.2.13.3.1.1.3 | CoriantTypesPercentage | RO | ||||||||||||||||||
column · CoriantTypesPercentage · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CinUtilizationMax | 1.3.6.1.4.1.42229.1.2.13.3.1.1.4 | CoriantTypesPercentage | RO | ||||||||||||||||||
column · CoriantTypesPercentage · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NoutUtilization | 1.3.6.1.4.1.42229.1.2.13.4 | ||||||||||||||||||||
| ToutUtilizationTable | 1.3.6.1.4.1.42229.1.2.13.4.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for TX utilization | |||||||||||||||||||||
| RoutUtilizationEntry | 1.3.6.1.4.1.42229.1.2.13.4.1.1 | NA | |||||||||||||||||||
| CoutUtilizationInstant | 1.3.6.1.4.1.42229.1.2.13.4.1.1.1 | CoriantTypesPercentage | RO | ||||||||||||||||||
column · CoriantTypesPercentage · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CoutUtilizationAvg | 1.3.6.1.4.1.42229.1.2.13.4.1.1.2 | CoriantTypesPercentage | RO | ||||||||||||||||||
column · CoriantTypesPercentage · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CoutUtilizationMin | 1.3.6.1.4.1.42229.1.2.13.4.1.1.3 | CoriantTypesPercentage | RO | ||||||||||||||||||
column · CoriantTypesPercentage · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CoutUtilizationMax | 1.3.6.1.4.1.42229.1.2.13.4.1.1.4 | CoriantTypesPercentage | RO | ||||||||||||||||||
column · CoriantTypesPercentage · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NoduDelay | 1.3.6.1.4.1.42229.1.2.13.23 | ||||||||||||||||||||
| ToduDelayTable | 1.3.6.1.4.1.42229.1.2.13.23.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for measured odu signal delay | |||||||||||||||||||||
| RoduDelayEntry | 1.3.6.1.4.1.42229.1.2.13.23.1.1 | NA | |||||||||||||||||||
| CoduDelayInstant | 1.3.6.1.4.1.42229.1.2.13.23.1.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the instant value of statistics counter UNITS:microseconds | |||||||||||||||||||||
| CoduDelayAvg | 1.3.6.1.4.1.42229.1.2.13.23.1.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the average value of statistics counter UNITS:microseconds | |||||||||||||||||||||
| CoduDelayMin | 1.3.6.1.4.1.42229.1.2.13.23.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the minimum value of statistics counter UNITS:microseconds | |||||||||||||||||||||
| CoduDelayMax | 1.3.6.1.4.1.42229.1.2.13.23.1.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current the maximum value of statistics counter UNITS:microseconds | |||||||||||||||||||||
| NinOpticalPower | 1.3.6.1.4.1.42229.1.2.13.24 | ||||||||||||||||||||
| TinOpticalPowerTable | 1.3.6.1.4.1.42229.1.2.13.24.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for RX optical power | |||||||||||||||||||||
| RinOpticalPowerEntry | 1.3.6.1.4.1.42229.1.2.13.24.1.1 | NA | |||||||||||||||||||
| CinOpticalPowerInstant | 1.3.6.1.4.1.42229.1.2.13.24.1.1.1 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerAvg | 1.3.6.1.4.1.42229.1.2.13.24.1.1.2 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerMin | 1.3.6.1.4.1.42229.1.2.13.24.1.1.3 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerMax | 1.3.6.1.4.1.42229.1.2.13.24.1.1.4 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NoutOpticalPower | 1.3.6.1.4.1.42229.1.2.13.25 | ||||||||||||||||||||
| ToutOpticalPowerTable | 1.3.6.1.4.1.42229.1.2.13.25.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for TX optical power | |||||||||||||||||||||
| RoutOpticalPowerEntry | 1.3.6.1.4.1.42229.1.2.13.25.1.1 | NA | |||||||||||||||||||
| CoutOpticalPowerInstant | 1.3.6.1.4.1.42229.1.2.13.25.1.1.1 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerAvg | 1.3.6.1.4.1.42229.1.2.13.25.1.1.2 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerMin | 1.3.6.1.4.1.42229.1.2.13.25.1.1.3 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerMax | 1.3.6.1.4.1.42229.1.2.13.25.1.1.4 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NdifferentialGroupDelay | 1.3.6.1.4.1.42229.1.2.13.26 | ||||||||||||||||||||
| TdifferentialGroupDelayTable | 1.3.6.1.4.1.42229.1.2.13.26.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for differential group delay | |||||||||||||||||||||
| RdifferentialGroupDelayEntry | 1.3.6.1.4.1.42229.1.2.13.26.1.1 | NA | |||||||||||||||||||
| CdifferentialGroupDelayInstant | 1.3.6.1.4.1.42229.1.2.13.26.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the instant value of statistics counter UNITS:ps | |||||||||||||||||||||
| CdifferentialGroupDelayAvg | 1.3.6.1.4.1.42229.1.2.13.26.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the average value of statistics counter UNITS:ps | |||||||||||||||||||||
| CdifferentialGroupDelayMin | 1.3.6.1.4.1.42229.1.2.13.26.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the minimum value of statistics counter UNITS:ps | |||||||||||||||||||||
| CdifferentialGroupDelayMax | 1.3.6.1.4.1.42229.1.2.13.26.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the maximum value of statistics counter UNITS:ps | |||||||||||||||||||||
| NchromaticDispersion | 1.3.6.1.4.1.42229.1.2.13.27 | ||||||||||||||||||||
| TchromaticDispersionTable | 1.3.6.1.4.1.42229.1.2.13.27.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for chromatic dispersion | |||||||||||||||||||||
| RchromaticDispersionEntry | 1.3.6.1.4.1.42229.1.2.13.27.1.1 | NA | |||||||||||||||||||
| CchromaticDispersionInstant | 1.3.6.1.4.1.42229.1.2.13.27.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current the instant value of statistics counter UNITS:ps/nm | |||||||||||||||||||||
| CchromaticDispersionAvg | 1.3.6.1.4.1.42229.1.2.13.27.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current the average value of statistics counter UNITS:ps/pm | |||||||||||||||||||||
| CchromaticDispersionMin | 1.3.6.1.4.1.42229.1.2.13.27.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current the minimum value of statistics counter UNITS:ps/pm | |||||||||||||||||||||
| CchromaticDispersionMax | 1.3.6.1.4.1.42229.1.2.13.27.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current the maximum value of statistics counter UNITS:ps/pm | |||||||||||||||||||||
| Nosnr | 1.3.6.1.4.1.42229.1.2.13.28 | ||||||||||||||||||||
| TosnrTable | 1.3.6.1.4.1.42229.1.2.13.28.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for osnr | |||||||||||||||||||||
| RosnrEntry | 1.3.6.1.4.1.42229.1.2.13.28.1.1 | NA | |||||||||||||||||||
| CosnrInstant | 1.3.6.1.4.1.42229.1.2.13.28.1.1.1 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CosnrAvg | 1.3.6.1.4.1.42229.1.2.13.28.1.1.2 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CosnrMin | 1.3.6.1.4.1.42229.1.2.13.28.1.1.3 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CosnrMax | 1.3.6.1.4.1.42229.1.2.13.28.1.1.4 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NqFactor | 1.3.6.1.4.1.42229.1.2.13.29 | ||||||||||||||||||||
| TqFactorTable | 1.3.6.1.4.1.42229.1.2.13.29.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for q-factor | |||||||||||||||||||||
| RqFactorEntry | 1.3.6.1.4.1.42229.1.2.13.29.1.1 | NA | |||||||||||||||||||
| CqFactorInstant | 1.3.6.1.4.1.42229.1.2.13.29.1.1.1 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CqFactorAvg | 1.3.6.1.4.1.42229.1.2.13.29.1.1.2 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CqFactorMin | 1.3.6.1.4.1.42229.1.2.13.29.1.1.3 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CqFactorMax | 1.3.6.1.4.1.42229.1.2.13.29.1.1.4 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NpolarizationDependentLoss | 1.3.6.1.4.1.42229.1.2.13.30 | ||||||||||||||||||||
| TpolarizationDependentLossTable | 1.3.6.1.4.1.42229.1.2.13.30.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for polarization dependent loss | |||||||||||||||||||||
| RpolarizationDependentLossEntry | 1.3.6.1.4.1.42229.1.2.13.30.1.1 | NA | |||||||||||||||||||
| CpolarizationDependentLossInstant | 1.3.6.1.4.1.42229.1.2.13.30.1.1.1 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CpolarizationDependentLossAvg | 1.3.6.1.4.1.42229.1.2.13.30.1.1.2 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CpolarizationDependentLossMin | 1.3.6.1.4.1.42229.1.2.13.30.1.1.3 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CpolarizationDependentLossMax | 1.3.6.1.4.1.42229.1.2.13.30.1.1.4 | CoriantTypesDBPrecision1 | RO | ||||||||||||||||||
column · CoriantTypesDBPrecision1 · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NinOpticalFrequency | 1.3.6.1.4.1.42229.1.2.13.31 | ||||||||||||||||||||
| TinOpticalFrequencyTable | 1.3.6.1.4.1.42229.1.2.13.31.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for RX optical frequency | |||||||||||||||||||||
| RinOpticalFrequencyEntry | 1.3.6.1.4.1.42229.1.2.13.31.1.1 | NA | |||||||||||||||||||
| CinOpticalFrequencyInstant | 1.3.6.1.4.1.42229.1.2.13.31.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the instant value of statistics counter UNITS:MHz | |||||||||||||||||||||
| CinOpticalFrequencyAvg | 1.3.6.1.4.1.42229.1.2.13.31.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the average value of statistics counter UNITS:MHz | |||||||||||||||||||||
| CinOpticalFrequencyMin | 1.3.6.1.4.1.42229.1.2.13.31.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the minimum value of statistics counter UNITS:MHz | |||||||||||||||||||||
| CinOpticalFrequencyMax | 1.3.6.1.4.1.42229.1.2.13.31.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the maximum value of statistics counter UNITS:MHz | |||||||||||||||||||||
| NoutOpticalFrequency | 1.3.6.1.4.1.42229.1.2.13.32 | ||||||||||||||||||||
| ToutOpticalFrequencyTable | 1.3.6.1.4.1.42229.1.2.13.32.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for TX optical frequency | |||||||||||||||||||||
| RoutOpticalFrequencyEntry | 1.3.6.1.4.1.42229.1.2.13.32.1.1 | NA | |||||||||||||||||||
| CoutOpticalFrequencyInstant | 1.3.6.1.4.1.42229.1.2.13.32.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the instant value of statistics counter UNITS:MHz | |||||||||||||||||||||
| CoutOpticalFrequencyAvg | 1.3.6.1.4.1.42229.1.2.13.32.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the average value of statistics counter UNITS:MHz | |||||||||||||||||||||
| CoutOpticalFrequencyMin | 1.3.6.1.4.1.42229.1.2.13.32.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the minimum value of statistics counter UNITS:MHz | |||||||||||||||||||||
| CoutOpticalFrequencyMax | 1.3.6.1.4.1.42229.1.2.13.32.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current the maximum value of statistics counter UNITS:MHz | |||||||||||||||||||||
| NinOpticalPowerLaneHigh | 1.3.6.1.4.1.42229.1.2.13.33 | ||||||||||||||||||||
| TinOpticalPowerLaneHighTable | 1.3.6.1.4.1.42229.1.2.13.33.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for highest value of RX lane optical power | |||||||||||||||||||||
| RinOpticalPowerLaneHighEntry | 1.3.6.1.4.1.42229.1.2.13.33.1.1 | NA | |||||||||||||||||||
| CinOpticalPowerLaneHighInstant | 1.3.6.1.4.1.42229.1.2.13.33.1.1.1 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneHighAvg | 1.3.6.1.4.1.42229.1.2.13.33.1.1.2 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneHighMin | 1.3.6.1.4.1.42229.1.2.13.33.1.1.3 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneHighMax | 1.3.6.1.4.1.42229.1.2.13.33.1.1.4 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NinOpticalPowerLaneLow | 1.3.6.1.4.1.42229.1.2.13.34 | ||||||||||||||||||||
| TinOpticalPowerLaneLowTable | 1.3.6.1.4.1.42229.1.2.13.34.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for lowest value of RX lane optical power | |||||||||||||||||||||
| RinOpticalPowerLaneLowEntry | 1.3.6.1.4.1.42229.1.2.13.34.1.1 | NA | |||||||||||||||||||
| CinOpticalPowerLaneLowInstant | 1.3.6.1.4.1.42229.1.2.13.34.1.1.1 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneLowAvg | 1.3.6.1.4.1.42229.1.2.13.34.1.1.2 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneLowMin | 1.3.6.1.4.1.42229.1.2.13.34.1.1.3 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneLowMax | 1.3.6.1.4.1.42229.1.2.13.34.1.1.4 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NinOpticalPowerLaneTotal | 1.3.6.1.4.1.42229.1.2.13.35 | ||||||||||||||||||||
| TinOpticalPowerLaneTotalTable | 1.3.6.1.4.1.42229.1.2.13.35.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for total value of RX lane optical power | |||||||||||||||||||||
| RinOpticalPowerLaneTotalEntry | 1.3.6.1.4.1.42229.1.2.13.35.1.1 | NA | |||||||||||||||||||
| CinOpticalPowerLaneTotalInstant | 1.3.6.1.4.1.42229.1.2.13.35.1.1.1 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneTotalAvg | 1.3.6.1.4.1.42229.1.2.13.35.1.1.2 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneTotalMin | 1.3.6.1.4.1.42229.1.2.13.35.1.1.3 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CinOpticalPowerLaneTotalMax | 1.3.6.1.4.1.42229.1.2.13.35.1.1.4 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NoutOpticalPowerLaneHigh | 1.3.6.1.4.1.42229.1.2.13.36 | ||||||||||||||||||||
| ToutOpticalPowerLaneHighTable | 1.3.6.1.4.1.42229.1.2.13.36.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for highest value of TX lane optical power | |||||||||||||||||||||
| RoutOpticalPowerLaneHighEntry | 1.3.6.1.4.1.42229.1.2.13.36.1.1 | NA | |||||||||||||||||||
| CoutOpticalPowerLaneHighInstant | 1.3.6.1.4.1.42229.1.2.13.36.1.1.1 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneHighAvg | 1.3.6.1.4.1.42229.1.2.13.36.1.1.2 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneHighMin | 1.3.6.1.4.1.42229.1.2.13.36.1.1.3 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneHighMax | 1.3.6.1.4.1.42229.1.2.13.36.1.1.4 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NoutOpticalPowerLaneLow | 1.3.6.1.4.1.42229.1.2.13.37 | ||||||||||||||||||||
| ToutOpticalPowerLaneLowTable | 1.3.6.1.4.1.42229.1.2.13.37.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for lowest value of TX lane optical power | |||||||||||||||||||||
| RoutOpticalPowerLaneLowEntry | 1.3.6.1.4.1.42229.1.2.13.37.1.1 | NA | |||||||||||||||||||
| CoutOpticalPowerLaneLowInstant | 1.3.6.1.4.1.42229.1.2.13.37.1.1.1 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneLowAvg | 1.3.6.1.4.1.42229.1.2.13.37.1.1.2 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneLowMin | 1.3.6.1.4.1.42229.1.2.13.37.1.1.3 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneLowMax | 1.3.6.1.4.1.42229.1.2.13.37.1.1.4 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NoutOpticalPowerLaneTotal | 1.3.6.1.4.1.42229.1.2.13.38 | ||||||||||||||||||||
| ToutOpticalPowerLaneTotalTable | 1.3.6.1.4.1.42229.1.2.13.38.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for total value of TX lane optical power | |||||||||||||||||||||
| RoutOpticalPowerLaneTotalEntry | 1.3.6.1.4.1.42229.1.2.13.38.1.1 | NA | |||||||||||||||||||
| CoutOpticalPowerLaneTotalInstant | 1.3.6.1.4.1.42229.1.2.13.38.1.1.1 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneTotalAvg | 1.3.6.1.4.1.42229.1.2.13.38.1.1.2 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneTotalMin | 1.3.6.1.4.1.42229.1.2.13.38.1.1.3 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CoutOpticalPowerLaneTotalMax | 1.3.6.1.4.1.42229.1.2.13.38.1.1.4 | CoriantTypesOpticalPower | RO | ||||||||||||||||||
column · CoriantTypesOpticalPower · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NmoduleTemperature | 1.3.6.1.4.1.42229.1.2.13.39 | ||||||||||||||||||||
| TmoduleTemperatureTable | 1.3.6.1.4.1.42229.1.2.13.39.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for module temperature | |||||||||||||||||||||
| RmoduleTemperatureEntry | 1.3.6.1.4.1.42229.1.2.13.39.1.1 | NA | |||||||||||||||||||
| CmoduleTemperatureInstant | 1.3.6.1.4.1.42229.1.2.13.39.1.1.1 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CmoduleTemperatureAvg | 1.3.6.1.4.1.42229.1.2.13.39.1.1.2 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CmoduleTemperatureMin | 1.3.6.1.4.1.42229.1.2.13.39.1.1.3 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CmoduleTemperatureMax | 1.3.6.1.4.1.42229.1.2.13.39.1.1.4 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NinletTemperature | 1.3.6.1.4.1.42229.1.2.13.40 | ||||||||||||||||||||
| TinletTemperatureTable | 1.3.6.1.4.1.42229.1.2.13.40.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for inlet temperature | |||||||||||||||||||||
| RinletTemperatureEntry | 1.3.6.1.4.1.42229.1.2.13.40.1.1 | NA | |||||||||||||||||||
| CinletTemperatureInstant | 1.3.6.1.4.1.42229.1.2.13.40.1.1.1 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CinletTemperatureAvg | 1.3.6.1.4.1.42229.1.2.13.40.1.1.2 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CinletTemperatureMin | 1.3.6.1.4.1.42229.1.2.13.40.1.1.3 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CinletTemperatureMax | 1.3.6.1.4.1.42229.1.2.13.40.1.1.4 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
| NoutletTemperature | 1.3.6.1.4.1.42229.1.2.13.41 | ||||||||||||||||||||
| ToutletTemperatureTable | 1.3.6.1.4.1.42229.1.2.13.41.1 | NA | |||||||||||||||||||
table · not-accessible · current statistics value: average, minimum, maximum and instant value for outlet temperature | |||||||||||||||||||||
| RoutletTemperatureEntry | 1.3.6.1.4.1.42229.1.2.13.41.1.1 | NA | |||||||||||||||||||
| CoutletTemperatureInstant | 1.3.6.1.4.1.42229.1.2.13.41.1.1.1 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the instant value of statistics counter | |||||||||||||||||||||
| CoutletTemperatureAvg | 1.3.6.1.4.1.42229.1.2.13.41.1.1.2 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the average value of statistics counter | |||||||||||||||||||||
| CoutletTemperatureMin | 1.3.6.1.4.1.42229.1.2.13.41.1.1.3 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the minimum value of statistics counter | |||||||||||||||||||||
| CoutletTemperatureMax | 1.3.6.1.4.1.42229.1.2.13.41.1.1.4 | CoriantTypesTemperaturePrecision3 | RO | ||||||||||||||||||
column · CoriantTypesTemperaturePrecision3 · read-only · current the maximum value of statistics counter | |||||||||||||||||||||
Textual conventions
CoriantCommonOtnEncryStatusEnumBitsauthenticationFailed(10)connectFailed(6)disabled(7)encryptFail(8)encryptNormal(9)handshake(1)keyInSync(3)keyInitializing(2)mismatch(5)notAvailable(0)trafficSquelched(11)unreachable(4)NULL
CoriantCommonOtnKeySyncSessionOCTET STRINGIndicate the associated session for the ODU channel to synchronize keys.
CoriantCommonpmThresholdValueOCTET STRING (SIZE (1..32))NULL
CoriantCommonpmUnitOfValueINTEGERbitRatio(15)bits(10)bitsS(11)blocks(12)db(5)dbm(1)degreec(17)events(8)frames(18)mhz(16)microseconds(2)notApplicable(0)octets(9)packets(7)percentage(14)ps(3)psNm(4)seconds(6)times(13)NULL
CoriantFileSwTypesDeviceFwVersionOCTET STRING (SIZE (0..64))NULL
CoriantFileSwTypesDeviceNameOCTET STRING (SIZE (0..64))NULL
CoriantFileSwTypesSwVersionOCTET STRING (SIZE (0..20))NULL
CoriantFileSwTypesSwloadProductOCTET STRING (SIZE (0..32))NULL
CoriantFileSwTypesSwloadVendorOCTET STRING (SIZE (0..32))NULL
CoriantFmtypesConditionTypeINTEGERaisL(51)aisOdu(29)aisOtu(25)authnFailed(11029)autoshutoff(106)bdi(104)bdiO(105)bdiOdu(30)bdiOtu(23)bdiP(108)bersdOdu(26)bersdOtu(24)cabs(99)candidatePskAuthenticated(11033)candidatePskMismatch(11031)connectFail(101)contcom(48)csfFdiGfp(42)csfLosGfp(40)csfLosyncGfp(41)csfOpu(36)csfRdiGfp(43)dbactFail(11012)dnr(11028)encTrafficSquelch(114)encryptFail(102)fibrconnMiss(107)fstoprot(11015)fstowkg(11016)idp(1)inactive(11013)init(11001)intrusion(11007)keyexFail(103)latchOpen(49)lckOdu(27)lf(38)linkdown(17)lockout(11017)lof(50)lofOtu(20)lofdGfp(44)loflom(35)loginFailed(11030)lol(19)lomOtu(21)loomfi(33)los(18)losMsa(109)losync(37)losyncCd(112)lpbkfacility(46)lpbkfterm(47)mantoprot(11018)mantowkg(11019)mea(5)meaHwvm(4)mgmtrst(14)msAis(52)msRfi(56)msim(34)noreq(11020)ntppu(16)ociOdu(28)oog(100)plmGfp(45)plmOdu(32)progflt(15)protna(110)prswwk(11026)pwra(6)pwrb(7)restart(11014)rf(39)rfiL(55)rsTim(54)rupDeg(2)rupFail(3)rupMiss(8)sbanr(9)sdcardfail(13)sdcardmiss(12)sdf(10)sdonprot(11021)sdonwkg(11022)sfonprot(11023)sfonwkg(11024)switchThres(111)swupgCompld(11002)swupgFail(11003)swupgIp(11009)swupgRollback(11004)tBbeRs(10052)tBeFec(10019)tBerFecHt(10021)tBroadcastpkts(10005)tCdHt(10034)tCdLt(10033)tCrcalignerrors(10007)tCvS(10047)tDelayOduHt(10030)tDelayOduLt(10031)tDgdHt(10032)tDropevents(10002)tEbOdu(10026)tEbOtu(10022)tEsOdu(10027)tEsOtu(10023)tEsRs(10053)tEsS(10048)tFragments(10010)tJabbers(10011)tLoss(10036)tLossRx(10066)tLossTx(10065)tMulticastpkts(10006)tOctets(10003)tOfrHt(10045)tOfrLt(10046)tOfs(10056)tOftHt(10043)tOftLt(10044)tOprHt(10037)tOprLaneHt(10057)tOprLaneLt(10058)tOprLt(10038)tOprTotalHt(10059)tOprTotalLt(10060)tOptHt(10040)tOptLaneHt(10061)tOptLaneLt(10062)tOptLt(10041)tOptTotalHt(10063)tOptTotalLt(10064)tOsnrLt(10035)tOversizepkts(10009)tPdlHt(10042)tPkts(10004)tPkts1024to1518octets(10017)tPkts128to255octets(10014)tPkts256to511octets(10015)tPkts512to1023octets(10016)tPkts64octets(10012)tPkts65to127octets(10013)tQfactorLt(10039)tSe(10001)tSefs(10051)tSesOdu(10028)tSesOtu(10024)tSesRs(10054)tSesS(10049)tUasOdu(10029)tUasOtu(10025)tUasRs(10055)tUasS(10050)tUbeFec(10020)tUndersizepkts(10008)tUtilHt(10018)thermal(11)timOdu(31)timOtu(22)timR(53)updatePskCompld(11032)updatePskFail(113)updatePskReqRcv(11034)upgCompld(11005)upgFail(11006)userlock(11008)wkswpr(11025)wtr(11027)ztcComplete(11011)ztcFail(11010)NULL
CoriantFmtypesEntityTypeFmINTEGERamplifier(53)bahofp2(48)bauofp2(58)bfm(20)cfp2(28)chm1(18)chm1g(56)chm1lh(68)chm2(19)chm2lh(69)db(23)fan(17)fc16g(35)fc8g(34)gopt(42)log(25)mgteth(21)ntppeer(22)oc192(39)occ2(51)ochOs(4)odu2(13)odu2e(12)odu3(11)odu4(10)oduc2(8)oduc3(9)oduflex(36)omd48O(55)omd48S(54)omd8b1ofp2(64)omd8b2ofp2(65)omd96(52)oms(41)ops(67)opsofp2(66)osc(60)otdrofp2(72)ots(61)otu2(37)otu2e(38)otu4(5)otuc2(6)otuc3(7)pabaofp2(44)paerofp2(47)pairofp2(45)palrofp2(46)paoscofp2(43)paulrofp2(59)port(16)ppp(33)psu(27)qsfp(29)security(26)sfpplus(62)shelf(14)slot(15)stm64(40)subslot(50)sw(24)t100gbe(3)t10gbe(1)t10gwanSdh(71)t10gwanSonet(70)t40gbe(2)tdcmofp2(57)time(30)user(31)xtm2(63)ztc(32)NULL
CoriantFmtypesServiceAffectFmINTEGERnsa(2)sa(1)SA: service affecting NSA: non-service affecting
CoriantFmtypesSeverityLevelINTEGERcleared(6)critical(1)major(2)minor(3)notAlarmed(4)notApplicable(0)notReported(5)alarm severity
CoriantPmtypesPmParameterINTEGERall(0)bbe(61)beFec(44)berFec(46)berFecMax(47)berFecMin(48)berPostFec(95)berPostFecMax(96)berPostFecMin(97)broadcastpkts(28)cd(11)cdMax(12)cdMin(13)crcalignerrors(30)cv(66)delay(5)delayMax(6)delayMin(7)dgd(8)dgdMax(9)dgdMin(10)dropevents(25)eb(1)encryptionFailRx(102)es(2)fragments(33)jabbers(34)loss(23)lossRx(101)lossTx(100)multicastpkts(29)octets(26)ofr(58)ofrMax(59)ofrMin(60)ofs(65)oft(55)oftMax(56)oftMin(57)opr(20)oprLaneHigh(68)oprLaneHighMax(69)oprLaneHighMin(70)oprLaneLow(71)oprLaneLowMax(72)oprLaneLowMin(73)oprMax(21)oprMin(22)oprTotal(74)oprTotalMax(75)oprTotalMin(76)opt(49)optLaneHigh(77)optLaneHighMax(78)optLaneHighMin(79)optLaneLow(80)optLaneLowMax(81)optLaneLowMin(82)optMax(50)optMin(51)optTotal(83)optTotalMax(84)optTotalMin(85)osnr(14)osnrMax(15)osnrMin(16)oversizepkts(32)pdl(52)pdlMax(53)pdlMin(54)pkts(27)pkts1024to1518octets(40)pkts128to255octets(37)pkts256to511octets(38)pkts512to1023octets(39)pkts64octets(35)pkts65to127octets(36)psc(99)psd(98)qFactor(17)qFactorMax(18)qFactorMin(19)se(24)sefs(67)ses(3)tinlet(87)tinletMax(91)tinletMin(92)tmodule(86)tmoduleMax(89)tmoduleMin(90)toutlet(88)toutletMax(93)toutletMin(94)uas(4)ubeFec(45)undersizepkts(31)utilization(41)utilizationMax(42)utilizationMin(43)NULL
CoriantPmtypesPmpTypeINTEGERall(100)coherentOpticalInterface(5)delayMeasurementOdu(4)equipmentTemperature(17)ethernetNendEgress(9)ethernetNendIngress(8)fcNendIngress(11)fec(10)loss(7)lossTxrx(20)notApplicable(0)oduEncryption(23)oduNendEgress(1)oduNendIngress(2)opticalPower(6)opticalPowerEgress(22)opticalPowerIngress(21)opticalPowerLane(18)otuNendIngress(3)protectionSwitch(19)sdhRsNendEgress(15)sdhRsNendIngress(13)shelfTemperature(16)sonetSNendEgress(14)sonetSNendIngress(12)NULL
CoriantPmtypesValidityTypeINTEGERcomplete(1)notAvailable(3)partial(2)NULL
CoriantRpcConfigurableLedTypesINTEGERledTest(1)locationLed(2)Types of LEDs that can be enabled/disabled by the user.
CoriantTypesCardTypeINTEGERbahofp2(107)bauofp2(112)chm1(13)chm1g(17)chm1lh(18)chm2(14)chm2lh(19)fan(11)occ2(100)omd48O(110)omd48S(109)omd8b1ofp2(114)omd8b2ofp2(115)omd96(101)opsofp2(116)otdrofp2(117)pabaofp2(103)paerofp2(106)pairofp2(104)palrofp2(105)paoscofp2(102)paulrofp2(113)psu(12)tdcmofp2(111)xtm2(16)NULL
CoriantTypesCreationscopeINTEGERsystemCreated(0)userCreated(1)NULL
CoriantTypesDBPrecision1OCTET STRINGdB for 0.1 precision UNITS:dB
CoriantTypesDateOCTET STRING (SIZE (0 | 10))The type of date show the mm/dd/year. The date type does not allow negative years
CoriantTypesDecimalFract1OCTET STRINGNULL
CoriantTypesDuplexModeINTEGERfull(1)half(2)na(0)NULL
CoriantTypesEnableSwitchINTEGERdisabled(2)enabled(1)NULL
CoriantTypesEquipmentTypeINTEGERbahofp2(107)bauofp2(112)bfm(15)cfp2(22)chm1(13)chm1g(17)chm1lh(18)chm2(14)chm2lh(19)empty(0)fan(11)filled(1)occ2(100)omd48O(110)omd48S(109)omd8b1ofp2(114)omd8b2ofp2(115)omd96(101)opsofp2(116)otdrofp2(117)pabaofp2(103)paerofp2(106)pairofp2(104)palrofp2(105)paoscofp2(102)paulrofp2(113)psu(12)qsfp(21)reserved(2)sfpplus(23)tdcmofp2(111)unrecognized(3)xtm2(16)NULL
CoriantTypesEthFecINTEGERauto(3)disabled(2)enabled(1)NULL
CoriantTypesEthernetRateINTEGERmaxRate(4)na(0)t10(1)t100(2)t1000(3)NULL UNITS:Mbit/s
CoriantTypesFilenameOCTET STRING (SIZE (1..128))String representing a filename
CoriantTypesFlowControlINTEGERna(0)off(1)rx(4)tx(3)txRx(2)NULL
CoriantTypesFreqUnsigned32 (0 | 191300000..196111250)Supported Frequency Range. UNITS:MHz
CoriantTypesFtpPathOCTET STRING (SIZE (1..1024))Representation of a FTP/STPF/FTPS/SCP path 'ftp://user@hostname/directorypath/filename' or an HTTP URL 'http://domain.com/filename'
CoriantTypesManagementDirectionINTEGERegress(2)ingress(1)notApplicable(0)NULL
CoriantTypesManagementLocationINTEGERfarEnd(2)nearEnd(1)notApplicable(3)NULL
CoriantTypesManagementTimePeriodINTEGERall(4)notApplicable(0)t15min(1)t1h(6)t1min(5)t24h(2)NULL
CoriantTypesNameIdentifierOCTET STRING (SIZE (1..32))NULL
CoriantTypesNumberListOCTET STRING (SIZE (0..255))List of numbers using ',' as separator and '..' to represent ranges. Examples: '12' , '1..4' , '1,5,10..12,20'
CoriantTypesOduTypeINTEGERodu0(1)odu1(2)odu2(3)odu2e(4)odu3(5)odu3e(6)odu4(7)oduc2(9)oduc3(10)oduflex(8)unused(0)NULL
CoriantTypesOnOffINTEGERoff(2)on(1)NULL
CoriantTypesOpticalDBOCTET STRINGOptical Attribute value with Unit dB UNITS:dB
CoriantTypesOpticalPowerOCTET STRINGOptical Power value in dBm UNITS:dBm
CoriantTypesOtukFecINTEGERg709(3)i4(4)i7(5)nofec(6)sdfec15(1)sdfec15nd(8)sdfec25(2)staircase7(7)NULL
CoriantTypesPasswordOCTET STRING (SIZE (8..32))Any ASCII values between 32 and 126 decimal
CoriantTypesPercentageUnsigned32 (0..100)NULL UNITS:%
CoriantTypesPluggableFormFactorINTEGERcfp2Aco(4)notApplicable(0)qsfp28(3)qsfpplus(2)sfp(6)sfpplus(5)unrecognized(1)xfp(7)Indicating the exact form factor of the pluggable.
CoriantTypesPluggableTypeINTEGERcfp2(22)qsfp(21)sfpplus(23)NULL
CoriantTypesPortIdUnsigned32NULL
CoriantTypesPortModeINTEGERfc16g(8)fc8g(9)notApplicable(0)oc192(14)ochosOtu2(16)ochosOtu2e(17)otu2(12)otu2e(13)otu4(10)qpsk100g(5)stm64(15)subport(4)t100gbe(3)t10gbe(1)t10gwanSdh(20)t10gwanSonet(19)t16qam200g(7)t40gbe(2)t8qam200g(18)t8qam300g(6)NULL
CoriantTypesPowerOCTET STRINGPower consumption value in W(WAT) UNITS:W
CoriantTypesRtpTypeINTEGERdirect(1)ospfv2(3)static(2)Type of the routing protocol.
CoriantTypesSessionIdOCTET STRING (SIZE (0..21))NULL
CoriantTypesShelfIdUnsigned32 (1..65535)NULL
CoriantTypesSlotIdUnsigned32NULL
CoriantTypesSnmpStringOCTET STRING (SIZE (1..32))NULL
CoriantTypesSourceProtocolINTEGERdirect(1)ospfv2(3)static(2)NULL
CoriantTypesSubslotIdUnsigned32NULL
CoriantTypesTemperatureOCTET STRINGTemperature value in degree Celsius. UNITS:Celsius
CoriantTypesTemperaturePrecision3OCTET STRINGTemperature value in Celsius with 0.001 precision UNITS:Celsius
CoriantTypesTestSignalConfigINTEGERnone(0)rxtx(3)NULL
CoriantTypesTestSignalTypeINTEGERidle(3)none(0)prbs(1)NULL
CoriantTypesTimModeINTEGERdapi(2)dapiOper(6)none(0)oper(3)sapi(1)sapiDapi(4)sapiDapiOper(7)sapiOper(5)NULL
CoriantTypesTimePeriodOCTET STRING (SIZE (8))Representation of a time period in 'hh:mm:ss'
CoriantTypesTypeOfDirectionINTEGERnotApplicable(0)rx(3)rxtx(4)tx(2)NULL
CoriantTypesUserNameOCTET STRING (SIZE (1..20))According with Linux user-name pattern
CoriantTypesYesNoINTEGERno(2)yes(1)NULL
IetfInetTypesAsNumberUnsigned32The as-number type represents autonomous system numbers which identify an Autonomous System (AS). An AS is a set of routers under a single technical administration, using an interior gateway protocol and common metrics to route packets within the AS, and using an exterior gateway protocol to route packets to other ASes. IANA maintains the AS number space and has delegated large parts to the regional registries. Autonomous system numbers were originally limited to 16 bits. BGP extensions have enlarged the autonomous system number space to 32 bits. This type therefore uses an uint32 base type without a range restriction in order to support a larger autonomous system number space. In the value set and its semantics, this type is equivalent to the InetAutonomousSystemNumber textual convention of the SMIv2.
IetfInetTypesDomainNameOCTET STRING (SIZE (1..253))The domain-name type represents a DNS domain name. The name SHOULD be fully qualified whenever possible. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. The description clause of schema nodes using the domain-name type MUST describe when and how these names are resolved to IP addresses. Note that the resolution of a domain-name value may require to query multiple DNS records (e.g., A for IPv4 and AAAA for IPv6). The order of the resolution process and which DNS record takes precedence can either be defined explicitly or may depend on the configuration of the resolver. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be A-labels as per RFC 5890.
IetfInetTypesDscpUnsigned32 (0..63)The dscp type represents a Differentiated Services Code Point that may be used for marking packets in a traffic stream. In the value set and its semantics, this type is equivalent to the Dscp textual convention of the SMIv2.
IetfInetTypesHostOCTET STRINGThe host type represents either an IP address or a DNS domain name.
IetfInetTypesIpAddressOCTET STRINGThe ip-address type represents an IP address and is IP version neutral. The format of the textual representation implies the IP version. This type supports scoped addresses by allowing zone identifiers in the address format.
IetfInetTypesIpAddressNoZoneOCTET STRINGThe ip-address-no-zone type represents an IP address and is IP version neutral. The format of the textual representation implies the IP version. This type does not support scoped addresses since it does not allow zone identifiers in the address format.
IetfInetTypesIpPrefixOCTET STRINGThe ip-prefix type represents an IP prefix and is IP version neutral. The format of the textual representations implies the IP version.
IetfInetTypesIpVersionINTEGERipv4(1)ipv6(2)unknown(0)This value represents the version of the IP protocol. In the value set and its semantics, this type is equivalent to the InetVersion textual convention of the SMIv2.
IetfInetTypesIpv4AddressOCTET STRINGThe ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format
IetfInetTypesIpv4AddressNoZoneOCTET STRINGAn IPv4 address without a zone index. This type, derived from ipv4-address, may be used in situations where the zone is known from the context and hence no zone index is needed.
IetfInetTypesIpv4PrefixOCTET STRINGThe ipv4-prefix type represents an IPv4 address prefix. The prefix length is given by the number following the slash character and must be less than or equal to 32. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The canonical format of an IPv4 prefix has all bits of the IPv4 address set to zero that are not part of the IPv4 prefix.
IetfInetTypesIpv6AddressOCTET STRINGThe ipv6-address type represents an IPv6 address in full, mixed, shortened, and shortened-mixed notation. The IPv6 address may include a zone index, separated by a % sign. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format of IPv6 addresses uses the textual representation defined in Section 4 of RFC 5952. The canonical format for the zone index is the numerical format as described in Section 11.2 of RFC 4007.
IetfInetTypesIpv6AddressNoZoneOCTET STRINGAn IPv6 address without a zone index. This type, derived from ipv6-address, may be used in situations where the zone is known from the context and hence no zone index is needed.
IetfInetTypesIpv6FlowLabelUnsigned32 (0..1048575)The ipv6-flow-label type represents the flow identifier or Flow Label in an IPv6 packet header that may be used to discriminate traffic flows. In the value set and its semantics, this type is equivalent to the IPv6FlowLabel textual convention of the SMIv2.
IetfInetTypesIpv6PrefixOCTET STRINGThe ipv6-prefix type represents an IPv6 address prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The IPv6 address should have all bits that do not belong to the prefix set to zero. The canonical format of an IPv6 prefix has all bits of the IPv6 address set to zero that are not part of the IPv6 prefix. Furthermore, the IPv6 address is represented as defined in Section 4 of RFC 5952.
IetfInetTypesPortNumberUnsigned32 (0..65535)The port-number type represents a 16-bit port number of an Internet transport-layer protocol such as UDP, TCP, DCCP, or SCTP. Port numbers are assigned by IANA. A current list of all assignments is available from <http://www.iana.org/>. Note that the port number value zero is reserved by IANA. In situations where the value zero does not make sense, it can be excluded by subtyping the port-number type. In the value set and its semantics, this type is equivalent to the InetPortNumber textual convention of the SMIv2.
IetfInetTypesUriOCTET STRINGThe uri type represents a Uniform Resource Identifier (URI) as defined by STD 66. Objects using the uri type MUST be in US-ASCII encoding, and MUST be normalized as described by RFC 3986 Sections 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary percent-encoding is removed, and all case-insensitive characters are set to lowercase except for hexadecimal digits, which are normalized to uppercase as described in Section 6.2.2.1. The purpose of this normalization is to help provide unique URIs. Note that this normalization is not sufficient to provide uniqueness. Two URIs that are textually distinct after this normalization may still be equivalent. Objects using the uri type may restrict the schemes that they permit. For example, 'data:' and 'urn:' schemes might not be appropriate. A zero-length URI is not a valid URI. This can be used to express 'URI absent' where required. In the value set and its semantics, this type is equivalent to the Uri SMIv2 textual convention defined in RFC 5017.
IetfNetconfAcmAccessOperationsTypeBitscreate(0)delete(3)exec(4)read(1)update(2)NETCONF Access Operation.
IetfNetconfAcmActionTypeINTEGERdeny(1)permit(0)Action taken by the server when a particular rule matches.
IetfNetconfAcmGroupNameTypeOCTET STRING (SIZE (1..65535))Name of administrative group to which users can be assigned.
IetfNetconfAcmMatchallStringTypeOCTET STRINGThe string containing a single asterisk '*' is used to conceptually represent all possible values for the particular leaf using this data type.
IetfNetconfAcmNodeInstanceIdentifierOCTET STRINGPath expression used to represent a special data node instance identifier string. A node-instance-identifier value is an unrestricted YANG instance-identifier expression. All the same rules as an instance-identifier apply except predicates for keys are optional. If a key predicate is missing, then the node-instance-identifier represents all possible server instances for that key. This XPath expression is evaluated in the following context: o The set of namespace declarations are those in scope on the leaf element where this type is used. o The set of variable bindings contains one variable, 'USER', which contains the name of the user of the current session. o The function library is the core function library, but note that due to the syntax restrictions of an instance-identifier, no functions are allowed. o The context node is the root node in the data tree.IetfNetconfAcmUserNameTypeOCTET STRING (SIZE (1..65535))General Purpose Username string.
IetfNetconfEditOperationTypeINTEGERcreate(2)delete(3)merge(0)remove(4)replace(1)NETCONF 'operation' attribute values
IetfNetconfErrorSeverityTypeINTEGERerror(0)warning(1)NETCONF Error Severity
IetfNetconfErrorTagTypeINTEGERaccessDenied(10)badAttribute(4)badElement(7)dataExists(14)dataMissing(15)inUse(0)invalidValue(1)lockDenied(11)malformedMessage(19)missingAttribute(3)missingElement(6)operationFailed(17)operationNotSupported(16)partialOperation(18)resourceDenied(12)rollbackFailed(13)tooBig(2)unknownAttribute(5)unknownElement(8)unknownNamespace(9)NETCONF Error Tag
IetfNetconfSessionIdOrZeroTypeUnsigned32NETCONF Session Id or Zero to indicate none
IetfNetconfSessionIdTypeUnsigned32 (1..4294967295)NETCONF Session Id
IetfNetconfWithDefaultsWithDefaultsModeINTEGERexplicit(3)reportAll(0)reportAllTagged(1)trim(2)Possible modes to report default data.
IetfYangTypesCounter32Unsigned32The counter32 type represents a non-negative integer that monotonically increases until it reaches a maximum value of 2^32-1 (4294967295 decimal), when it wraps around and starts increasing again from zero. Counters have no defined 'initial' value, and thus, a single value of a counter has (in general) no information content. Discontinuities in the monotonically increasing value normally occur at re-initialization of the management system, and at other times as specified in the description of a schema node using this type. If such other times can occur, for example, the creation of a schema node of type counter32 at times other than re-initialization, then a corresponding schema node should be defined, with an appropriate type, to indicate the last discontinuity. The counter32 type should not be used for configuration schema nodes. A default statement SHOULD NOT be used in combination with the type counter32. In the value set and its semantics, this type is equivalent to the Counter32 type of the SMIv2.
IetfYangTypesCounter64OCTET STRINGThe counter64 type represents a non-negative integer that monotonically increases until it reaches a maximum value of 2^64-1 (18446744073709551615 decimal), when it wraps around and starts increasing again from zero. Counters have no defined 'initial' value, and thus, a single value of a counter has (in general) no information content. Discontinuities in the monotonically increasing value normally occur at re-initialization of the management system, and at other times as specified in the description of a schema node using this type. If such other times can occur, for example, the creation of a schema node of type counter64 at times other than re-initialization, then a corresponding schema node should be defined, with an appropriate type, to indicate the last discontinuity. The counter64 type should not be used for configuration schema nodes. A default statement SHOULD NOT be used in combination with the type counter64. In the value set and its semantics, this type is equivalent to the Counter64 type of the SMIv2.
IetfYangTypesDateAndTimeOCTET STRINGThe date-and-time type is a profile of the ISO 8601 standard for representation of dates and times using the Gregorian calendar. The profile is defined by the date-time production in Section 5.6 of RFC 3339. The date-and-time type is compatible with the dateTime XML schema type with the following notable exceptions: (a) The date-and-time type does not allow negative years. (b) The date-and-time time-offset -00:00 indicates an unknown time zone (see RFC 3339) while -00:00 and +00:00 and Z all represent the same time zone in dateTime. (c) The canonical format (see below) of data-and-time values differs from the canonical format used by the dateTime XML schema type, which requires all times to be in UTC using the time-offset 'Z'. This type is not equivalent to the DateAndTime textual convention of the SMIv2 since RFC 3339 uses a different separator between full-date and full-time and provides higher resolution of time-secfrac. The canonical format for date-and-time values with a known time zone uses a numeric time zone offset that is calculated using the device's configured known offset to UTC time. A change of the device's offset to UTC time will cause date-and-time values to change accordingly. Such changes might happen periodically in case a server follows automatically daylight saving time (DST) time zone offset changes. The canonical format for date-and-time values with an unknown time zone (usually referring to the notion of local time) uses the time-offset -00:00.IetfYangTypesDottedQuadOCTET STRINGAn unsigned 32-bit number expressed in the dotted-quad notation, i.e., four octets written as decimal numbers and separated with the '.' (full stop) character.
IetfYangTypesGauge32Unsigned32The gauge32 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value cannot be greater than 2^32-1 (4294967295 decimal), and the minimum value cannot be smaller than 0. The value of a gauge32 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the gauge32 also decreases (increases). In the value set and its semantics, this type is equivalent to the Gauge32 type of the SMIv2.
IetfYangTypesGauge64OCTET STRINGThe gauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value cannot be greater than 2^64-1 (18446744073709551615), and the minimum value cannot be smaller than 0. The value of a gauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the gauge64 also decreases (increases). In the value set and its semantics, this type is equivalent to the CounterBasedGauge64 SMIv2 textual convention defined in RFC 2856
IetfYangTypesHexStringOCTET STRINGA hexadecimal string with octets represented as hex digits separated by colons. The canonical representation uses lowercase characters.
IetfYangTypesMacAddressOCTET STRINGThe mac-address type represents an IEEE 802 MAC address. The canonical representation uses lowercase characters. In the value set and its semantics, this type is equivalent to the MacAddress textual convention of the SMIv2.
IetfYangTypesObjectIdentifierOCTET STRINGThe object-identifier type represents administratively assigned names in a registration-hierarchical-name tree. Values of this type are denoted as a sequence of numerical non-negative sub-identifier values. Each sub-identifier value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers are separated by single dots and without any intermediate whitespace. The ASN.1 standard restricts the value space of the first sub-identifier to 0, 1, or 2. Furthermore, the value space of the second sub-identifier is restricted to the range 0 to 39 if the first sub-identifier is 0 or 1. Finally, the ASN.1 standard requires that an object identifier has always at least two sub-identifiers. The pattern captures these restrictions. Although the number of sub-identifiers is not limited, module designers should realize that there may be implementations that stick with the SMIv2 limit of 128 sub-identifiers. This type is a superset of the SMIv2 OBJECT IDENTIFIER type since it is not restricted to 128 sub-identifiers. Hence, this type SHOULD NOT be used to represent the SMIv2 OBJECT IDENTIFIER type; the object-identifier-128 type SHOULD be used instead.
IetfYangTypesObjectIdentifier128OCTET STRINGThis type represents object-identifiers restricted to 128 sub-identifiers. In the value set and its semantics, this type is equivalent to the OBJECT IDENTIFIER type of the SMIv2.
IetfYangTypesPhysAddressOCTET STRINGRepresents media- or physical-level addresses represented as a sequence octets, each octet represented by two hexadecimal numbers. Octets are separated by colons. The canonical representation uses lowercase characters. In the value set and its semantics, this type is equivalent to the PhysAddress textual convention of the SMIv2.
IetfYangTypesTimestampUnsigned32The timestamp type represents the value of an associated timeticks schema node at which a specific occurrence happened. The specific occurrence must be defined in the description of any schema node defined using this type. When the specific occurrence occurred prior to the last time the associated timeticks attribute was zero, then the timestamp value is zero. Note that this requires all timestamp values to be reset to zero when the value of the associated timeticks attribute reaches 497+ days and wraps around to zero. The associated timeticks schema node must be specified in the description of any schema node using this type. In the value set and its semantics, this type is equivalent to the TimeStamp textual convention of the SMIv2.
IetfYangTypesTimeticksUnsigned32The timeticks type represents a non-negative integer that represents the time, modulo 2^32 (4294967296 decimal), in hundredths of a second between two epochs. When a schema node is defined that uses this type, the description of the schema node identifies both of the reference epochs. In the value set and its semantics, this type is equivalent to the TimeTicks type of the SMIv2.
IetfYangTypesUuidOCTET STRINGA Universally Unique IDentifier in the string representation defined in RFC 4122. The canonical representation uses lowercase characters. The following is an example of a UUID in string representation: f81d4fae-7dec-11d0-a765-00a0c91e6bf6
IetfYangTypesXpath10OCTET STRINGThis type represents an XPATH 1.0 expression. When a schema node is defined that uses this type, the description of the schema node MUST specify the XPath context in which the XPath expression is evaluated.
IetfYangTypesYangIdentifierOCTET STRING (SIZE (1..65535))A YANG identifier string as defined by the 'identifier' rule in Section 12 of RFC 6020. An identifier must start with an alphabetic character or an underscore followed by an arbitrary sequence of alphabetic or numeric characters, underscores, hyphens, or dots. A YANG identifier MUST NOT start with any possible combination of the lowercase or uppercase character sequence 'xml'.
IetfYangTypesZeroBasedCounter32Unsigned32The zero-based-counter32 type represents a counter32 that has the defined 'initial' value zero. A schema node of this type will be set to zero (0) on creation and will thereafter increase monotonically until it reaches a maximum value of 2^32-1 (4294967295 decimal), when it wraps around and starts increasing again from zero. Provided that an application discovers a new schema node of this type within the minimum time to wrap, it can use the 'initial' value as a delta. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. In the value set and its semantics, this type is equivalent to the ZeroBasedCounter32 textual convention of the SMIv2.
IetfYangTypesZeroBasedCounter64OCTET STRINGThe zero-based-counter64 type represents a counter64 that has the defined 'initial' value zero. A schema node of this type will be set to zero (0) on creation and will thereafter increase monotonically until it reaches a maximum value of 2^64-1 (18446744073709551615 decimal), when it wraps around and starts increasing again from zero. Provided that an application discovers a new schema node of this type within the minimum time to wrap, it can use the 'initial' value as a delta. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. In the value set and its semantics, this type is equivalent to the ZeroBasedCounter64 textual convention of the SMIv2.
KeySyncSessionCertificateRefOCTET STRINGcertificate to be referred to.
KeySyncSessionInterfaceRefOCTET STRINGInterface to be referred to.
LldpLldpSysCapBitsbridge(2)cvlancomponent(8)docsiscabledevice(6)other(0)repeater(1)router(4)stationonly(7)svlancomponent(9)telephone(5)twoportmacrelay(10)wlanaccesspoint(3)NULL
OpticalCommonSupportingPortOCTET STRINGReferences one individual port, or no port at all
OtdrOtdrIorOCTET STRINGNULL
OtdrOtdrPulseWidthOCTET STRINGNULL
OtdrOtdrRangeOCTET STRINGNULL
Traps / Notifications
- alarmNotification
1.3.6.1.4.1.42229.1.2.1.2.1 - notAlarmedEventNotification
1.3.6.1.4.1.42229.1.2.1.2.2