ICOTERA-I6800-SERIES
Icotera A/SThe Icotera management information base SMI definitions
snmptranslate -m ICOTERA-I6800-SERIES -Tpsnmpwalk -v2c -c <community> -m ICOTERA-I6800-SERIES <host> 1.3.6.1.4.1.29865Imports
| IF-MIB | InterfaceIndex, ifIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Iicotera | 1.3.6.1.4.1.29865 | |||
identity The Icotera management information base SMI definitions | ||||
| NictIGW4k | 1.3.6.1.4.1.29865.12 | |||
node · current Device related SNMP options | ||||
| NictMgmt | 1.3.6.1.4.1.29865.12.2 | |||
| NictMgmtMib | 1.3.6.1.4.1.29865.12.2.1 | |||
node · current The MIB which allows managing the CPE | ||||
| NictFwUpg | 1.3.6.1.4.1.29865.12.2.1.1 | |||
node · current The MIB of firmware upgrade | ||||
| SupgUrl | 1.3.6.1.4.1.29865.12.2.1.1.1 | OCTET STRING (SIZE (0..255)) | RW | |
scalar · OCTET STRING (SIZE (0..255)) · read-write · current Path to file with firmware. | ||||
| SupgExecute | 1.3.6.1.4.1.29865.12.2.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current MIB responsible for trigerring firmware upgrade.
| ||||
| SupgStatus | 1.3.6.1.4.1.29865.12.2.1.1.3 | OCTET STRING (SIZE (0..255)) | RO | |
scalar · OCTET STRING (SIZE (0..255)) · read-only · current MIB show upgrade status. | ||||
| NictCfgUpdate | 1.3.6.1.4.1.29865.12.2.1.2 | |||
node · current The MIB of configuration update | ||||
| ScfgTftpPath | 1.3.6.1.4.1.29865.12.2.1.2.1 | OCTET STRING (SIZE (0..255)) | RW | |
scalar · OCTET STRING (SIZE (0..255)) · read-write · current Path to cofiguration file stored at TFTP server. | ||||
| ScfgExecute | 1.3.6.1.4.1.29865.12.2.1.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current MIB responsible for trigerring config upload at CPE.
| ||||
| ScfgStatus | 1.3.6.1.4.1.29865.12.2.1.2.3 | OCTET STRING (SIZE (0..255)) | RO | |
scalar · OCTET STRING (SIZE (0..255)) · read-only · current MIB show configuration upgrade status. | ||||
| NictReboot | 1.3.6.1.4.1.29865.12.2.1.3 | |||
node · current The MIB responsible for CPE reboot | ||||
| SperformCpeReboot | 1.3.6.1.4.1.29865.12.2.1.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current MIB responsible for trigerring CPE reboot.
| ||||
| NictServices | 1.3.6.1.4.1.29865.12.3 | |||
| NictCatv | 1.3.6.1.4.1.29865.12.3.1 | |||
node · current The MIB module for managing Icotera services | ||||
| NictCatvMib | 1.3.6.1.4.1.29865.12.3.1.1 | |||
node · current The MIB module for managing Icotera services | ||||
| ScatvModuleAdminStatus | 1.3.6.1.4.1.29865.12.3.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The administrative status of the module, this can be enabled(1) or disabled(0).
| ||||
| ScatvModuleFilter | 1.3.6.1.4.1.29865.12.3.1.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Package filter selected for catv module
| ||||
| ScatvModuleRflevel | 1.3.6.1.4.1.29865.12.3.1.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current RF signal amplification on CATV output
| ||||
| ScatvModuleLowSignal | 1.3.6.1.4.1.29865.12.3.1.1.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Low signal level of catv led | ||||
| ScatvModuleSignalDetected | 1.3.6.1.4.1.29865.12.3.1.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Tells whether CATV signal is detected: yes(1) - detected, no(0) - not detected.
| ||||
| ScatvModulePowerLevel | 1.3.6.1.4.1.29865.12.3.1.1.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current CATV power level. It can have one of the following values: - any integer between -1299 and 199 when the power level is higher than -13.00 and lower than 2.00, which is the power level in dBm multiplied by 100. - a value of -2147483648 when the power level is lower than -13 dBm - a value of 2147483647 when the power level is higher than 2 dBm. | ||||
| ScatvModuleRfOutputLevel | 1.3.6.1.4.1.29865.12.3.1.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Parameter is supported by special CATV solution. No data will be provided if CPE is not compatible. Calculated RF output value which should be expected. - Expected value is presented in dBuV multiplied by 100. - if value of 0 is received, either CATV fiber is not connected or CATV is turned off. | ||||
| ScatvModuleOmi | 1.3.6.1.4.1.29865.12.3.1.1.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Parameter is supported by special CATV solution. No data will be provided if CPE is not compatible. Currently OMI value set at CPE. | ||||
| NictVoip | 1.3.6.1.4.1.29865.12.3.2 | |||
node · current The MIB module for checking VoIP service | ||||
| NictVoipMib | 1.3.6.1.4.1.29865.12.3.2.1 | |||
node · current The MIB module for checking VoIP service status | ||||
| SvoipFXSport1 | 1.3.6.1.4.1.29865.12.3.2.1.1 | OCTET STRING (SIZE (0..255)) | RO | |
scalar · OCTET STRING (SIZE (0..255)) · read-only · current The administrative status of the FXS port 1 | ||||
| SvoipFXSport2 | 1.3.6.1.4.1.29865.12.3.2.1.2 | OCTET STRING (SIZE (0..255)) | RO | |
scalar · OCTET STRING (SIZE (0..255)) · read-only · current The administrative status of the FXS port 2 | ||||
| NictDuplex | 1.3.6.1.4.1.29865.12.4 | |||
| NictDuplexMib | 1.3.6.1.4.1.29865.12.4.15 | |||
node · current Initial release. | ||||
| NduplexConfig | 1.3.6.1.4.1.29865.12.4.15.1 | |||
| TifDuplexTable | 1.3.6.1.4.1.29865.12.4.15.1.1 | NA | ||
table · not-accessible · current A table containing interface duplex status. | ||||
| RifDuplexEntry | 1.3.6.1.4.1.29865.12.4.15.1.1.1 | NA | ||
row · not-accessible · current Status for a specific interface using ethernet-like medium.
| ||||
| CifDuplexIndex | 1.3.6.1.4.1.29865.12.4.15.1.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | ||||
| CifDuplexStatus | 1.3.6.1.4.1.29865.12.4.15.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current duplex mode of operation of the interface. 'unknown' indicates that the current duplex mode could not be determined.
| ||||
| NictReset | 1.3.6.1.4.1.29865.12.5 | |||
| NictFacRst | 1.3.6.1.4.1.29865.12.5.1 | |||
node · current The MIB parent for CPE reset | ||||
| NictFacRstMib | 1.3.6.1.4.1.29865.12.5.1.1 | |||
node · current The MIB which makes Factory Reset of CPE | ||||
| SperformFactoryReset | 1.3.6.1.4.1.29865.12.5.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Status of FactoryReset feature.
| ||||
| NictDhcp | 1.3.6.1.4.1.29865.12.6 | |||
| TictDHCPsrv | 1.3.6.1.4.1.29865.12.6.1 | NA | ||
table · not-accessible · current Table of DHCPd leases. | ||||
| RictDHCPsrvLeases | 1.3.6.1.4.1.29865.12.6.1.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about lease.
| ||||
| CictDHCPsrvIndex | 1.3.6.1.4.1.29865.12.6.1.1.1 | INTEGER (1..96) | RO | |
column · INTEGER (1..96) · read-only · current A unique value for LEASE index. | ||||
| CictMacAddress | 1.3.6.1.4.1.29865.12.6.1.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address of Lease. | ||||
| CictExpire | 1.3.6.1.4.1.29865.12.6.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Lease time until Expire | ||||
| CictIPaddress | 1.3.6.1.4.1.29865.12.6.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current IP address learned from host. | ||||
| CictHostName | 1.3.6.1.4.1.29865.12.6.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Hostname. | ||||