PROTEON-MIB
NxNetworkssnmptranslate -m PROTEON-MIB -Tpsnmpwalk -v2c -c <community> -m PROTEON-MIB <host> 1.3.6.1.4.1.1Imports
| IF-MIB | ifIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nproteon | 1.3.6.1.4.1.1 | |||
| !proElsTrapV1 | 1.3.6.1.4.1.1.0.1 | |||
| !proElsTrapV2 | 1.3.6.1.4.1.1.0.2 | |||
notification An ELS trap event. proElsSubSysEventMsg provides a textual description of the event.
| ||||
| NproAdmin | 1.3.6.1.4.1.1.1 | |||
| NproSysObjId | 1.3.6.1.4.1.1.1.1 | |||
| SproElsTrapSeqs | 1.3.6.1.4.1.1.1.1.1 | Counter | RO | deprecated |
scalar · Counter · read-only · deprecated ELS trap sequence number | ||||
| SproElsTrapSubSystem | 1.3.6.1.4.1.1.1.1.2 | INTEGER | RO | deprecated |
scalar · INTEGER · read-only · deprecated ELS trap subsystem number | ||||
| SproElsTrapEvent | 1.3.6.1.4.1.1.1.1.3 | INTEGER | RO | deprecated |
scalar · INTEGER · read-only · deprecated ELS trap event number | ||||
| NproElsTrapVar1 | 1.3.6.1.4.1.1.1.1.5 | |||
| NproElsTrapVar2 | 1.3.6.1.4.1.1.1.1.6 | |||
| NproElsTrapVar3 | 1.3.6.1.4.1.1.1.1.7 | |||
| NproElsTrapVar4 | 1.3.6.1.4.1.1.1.1.8 | |||
| NproElsTrapVar5 | 1.3.6.1.4.1.1.1.1.9 | |||
| NproElsTrapVar6 | 1.3.6.1.4.1.1.1.1.10 | |||
| NproElsTrapVar7 | 1.3.6.1.4.1.1.1.1.11 | |||
| NproElsTrapVar8 | 1.3.6.1.4.1.1.1.1.12 | |||
| NproElsTrapVar9 | 1.3.6.1.4.1.1.1.1.13 | |||
| NproSysObjIdP4100 | 1.3.6.1.4.1.1.1.1.41 | |||
| NproSysObjIdP4200 | 1.3.6.1.4.1.1.1.1.42 | |||
| NproSysObjIdDNX300 | 1.3.6.1.4.1.1.1.1.43 | |||
| NproSysObjIdCNX400 | 1.3.6.1.4.1.1.1.1.44 | |||
| NproSysObjIdCNX600 | 1.3.6.1.4.1.1.1.1.46 | |||
| NproSysObjIdRBX200 | 1.3.6.1.4.1.1.1.1.47 | |||
| NproSysObjIdCNX500 | 1.3.6.1.4.1.1.1.1.49 | |||
| NproSysObjIdRBX250 | 1.3.6.1.4.1.1.1.1.50 | |||
| NproSysObjIdBOSS3Slot | 1.3.6.1.4.1.1.1.1.53 | |||
| NproSysObjIdBOSSs90 | 1.3.6.1.4.1.1.1.1.54 | |||
| NproStatus | 1.3.6.1.4.1.1.1.2 | |||
| SproStatusReloadTime | 1.3.6.1.4.1.1.1.2.1 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory The time (in hundredths of a second) since the last time the router software was reloaded. | ||||
| SproStatusStarts | 1.3.6.1.4.1.1.1.2.2 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of times the router has started since the last reload. | ||||
| SproStatusCrashes | 1.3.6.1.4.1.1.1.2.3 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of times the router has crashed since the last reload. Only those crashes that caused the router to deliberately restart due to a software error are counted by this object. | ||||
| SproStatusCrashMsg | 1.3.6.1.4.1.1.1.2.4 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The last crash message. The message will indicate if the router has not crashed since the last reload. | ||||
| NproPriv | 1.3.6.1.4.1.1.1.5 | |||
| SproActionReset | 1.3.6.1.4.1.1.1.5.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This object, when read, returns a value of zero. A set of this object causes the router to be reset. The value represents the delay (in seconds) before the reset will take affect. This object should only be SET to 0 or a positive number | ||||
| SproActionReload | 1.3.6.1.4.1.1.1.5.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This object, when read, returns a value of zero. A set of this object causes the router to be reloaded. The value represents the delay (in seconds) before the reload will take affect. This object should only be SET to 0 or a positive number | ||||
| NproSystem | 1.3.6.1.4.1.1.6 | |||
| NproResource | 1.3.6.1.4.1.1.6.1 | |||
| NproResMemory | 1.3.6.1.4.1.1.6.1.1 | |||
| NproResMemHeap | 1.3.6.1.4.1.1.6.1.1.1 | |||
| SproResMemHeapTotal | 1.3.6.1.4.1.1.6.1.1.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The total number of bytes of heap memory available for allocation. | ||||
| SproResMemHeapReserve | 1.3.6.1.4.1.1.6.1.1.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The minimum amount of memory needed by the currently configured protocols and features. | ||||
| SproResMemHeapNeverAlloc | 1.3.6.1.4.1.1.6.1.1.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The memory that has never been allocated. | ||||
| SproResMemHeapPermAlloc | 1.3.6.1.4.1.1.6.1.1.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The memory that is permanently allocated to router tasks. | ||||
| SproResMemHeapTempAlloc | 1.3.6.1.4.1.1.6.1.1.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The memory that is temporarily allocated to router tasks. | ||||
| SproResMemHeapPrevAlloc | 1.3.6.1.4.1.1.6.1.1.1.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The memory that was temporarily allocated and returned to the free pool. | ||||
| NproResMemBuf | 1.3.6.1.4.1.1.6.1.1.2 | |||
| SproResMemBufTotal | 1.3.6.1.4.1.1.6.1.1.2.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The total number of bytes of buffer memory available for allocation. | ||||
| SproResMemBufReserve | 1.3.6.1.4.1.1.6.1.1.2.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The minimum amount of memory needed by the currently configured protocols and features. | ||||
| SproResMemBufNeverAlloc | 1.3.6.1.4.1.1.6.1.1.2.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The memory that has never been allocated. | ||||
| SproResMemBufPermAlloc | 1.3.6.1.4.1.1.6.1.1.2.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The memory that is permanently allocated to router tasks. | ||||
| NproResBuffers | 1.3.6.1.4.1.1.6.1.2 | |||
| NproResBufGlobal | 1.3.6.1.4.1.1.6.1.2.1 | |||
| SproResBufGlobalTotal | 1.3.6.1.4.1.1.6.1.2.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The total number of global buffers in the system. | ||||
| SproResBufGlobalFree | 1.3.6.1.4.1.1.6.1.2.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The total number of free buffers in the system. | ||||
| SproResBufGlobalFair | 1.3.6.1.4.1.1.6.1.2.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The 'fair' number of buffers for each interface. | ||||
| SproResBufGlobalLow | 1.3.6.1.4.1.1.6.1.2.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The low mark for free buffers. If the value of proResBufGlobalFree is less than this object then freed buffers will not be placed on any queue that has more than the 'fair' number of buffers on it. | ||||
| TproResBufTable | 1.3.6.1.4.1.1.6.1.2.2 | NA | mandatory | |
table · not-accessible · mandatory The per-port buffer table. | ||||
| RproResBufTableEntry | 1.3.6.1.4.1.1.6.1.2.2.1 | NA | mandatory | |
row · not-accessible · mandatory An entry indicating the buffers allocated per interface.
| ||||
| CproResInputBufsReq | 1.3.6.1.4.1.1.6.1.2.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of buffers requested for this interface. | ||||
| CproResInputBufsAlloc | 1.3.6.1.4.1.1.6.1.2.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of buffers allocated for this interface. | ||||
| CproResInputBufsLow | 1.3.6.1.4.1.1.6.1.2.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The low water mark for number of buffers. | ||||
| CproResInputBufsCurrent | 1.3.6.1.4.1.1.6.1.2.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current number of buffers for this device. A value of zero indicates that the device is disabled. If, on receipt of a packet, the value of this object is less than proResInputBufsLow than the packet is eligible for flow control. | ||||
| CproResInputBufsSize | 1.3.6.1.4.1.1.6.1.2.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The size, in bytes, of each buffer allocated to this interface. | ||||
| CproResInputBufsTotalBytes | 1.3.6.1.4.1.1.6.1.2.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The total number of bytes allocated to this interface. This is obtained by multiplying proResInputBufsAlloc by proResInputBufsSize. | ||||
| NproEls | 1.3.6.1.4.1.1.6.2 | |||
| NproElsGeneric | 1.3.6.1.4.1.1.6.2.1 | |||
| SproElsPin | 1.3.6.1.4.1.1.6.2.1.1 | INTEGER (0..65535) | RW | mandatory |
scalar · INTEGER (0..65535) · read-write · mandatory The number of ELS enterprise specific traps which may be generated per second. A value of zero indicates no limit. This object reflects the operational pin value currently in use by ELS. A SET of this object immediately affects ELS. This variable should only be SET to a value in the range 0 to 65535. | ||||
| SproElsDropped | 1.3.6.1.4.1.1.6.2.1.2 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of ELS enterprise specific traps which were not sent because the pin had been reached. | ||||
| SproElsTimestamp | 1.3.6.1.4.1.1.6.2.1.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This object indicates whether ELS messages should be timestamped and, if yes, the timebase to use. Setting the object to proTSOff(1) disables timestamping. Setting the object to proTSSysUpTime(2) uses the sysUpTime value as the timestamp. Setting the object to proTSTimeOfDay(3) uses the real-time clock value as the timestamp. This object reflects the operational timestamp value currently in use by ELS. A SET of this object immediately affects ELS.
| ||||
| SproElsAction | 1.3.6.1.4.1.1.6.2.1.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory A read of this object always returns the value other(1). Setting the object to elsActionClear(2) clears all ELS configuration. Specifically, this clears all ELS related sram records. This action is the same as entering the <clear> command at the ELS config menu in the gateway console. Setting the object to proElsActionDefault(3) turns off logging of ELS events to both the console and SNMP traps for all configured subsystems. Note that it only affects subsystem configuration and not individual event or group configuration. A SET of this object affects the configuration values defined for ELS, but not the current operational parameters. Therefore, these changes will only become active when the configuration is updated.
| ||||
| SproElsTrapVersion | 1.3.6.1.4.1.1.6.2.1.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The format of the ELS trap has been changed so that the trap info is more useful to a majority of net managers. It now contains the fully constructed ELS message text, as opposed to the values that are presented in the text. See the ELS enterprise specific trap definition for more information.
| ||||
| TproElsSubSysTable | 1.3.6.1.4.1.1.6.2.2 | NA | mandatory | |
table · not-accessible · mandatory The ELS sub-system table. | ||||
| RproElsSubSysTableEntry | 1.3.6.1.4.1.1.6.2.2.1 | NA | mandatory | |
row · not-accessible · mandatory An entry corresponding to a specific subsystem.
| ||||
| CproElsSubSysIndex | 1.3.6.1.4.1.1.6.2.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object is used to identify a specific subsystem.
| ||||
| CproElsSubSysDescr | 1.3.6.1.4.1.1.6.2.2.1.2 | DisplayString (SIZE (0..16)) | RO | mandatory |
column · DisplayString (SIZE (0..16)) · read-only · mandatory This is a textual string indicating the name of the subsystem. | ||||
| CproElsSubSysNumEvents | 1.3.6.1.4.1.1.6.2.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of events defined for this subsystem. | ||||
| CproElsSubSysDisplayEnable | 1.3.6.1.4.1.1.6.2.2.1.4 | ProElsMsgLogLevel | RW | mandatory |
column · ProElsMsgLogLevel · read-write · mandatory A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrDisplayLevel variable. A SET of this object to one of the other enumerated values has the effect of enabling ELS events of the specified level to the console. For 2210 platform, this SET changes the configuration parameters and also immediately affects the operational parameters in use by ELS. For other platforms, this SET only affects the configuration parameters and not the current operational parameters in use by ELS. So in order for these changes to take effect, the configuration must be updated. | ||||
| CproElsSubSysDisplayDisable | 1.3.6.1.4.1.1.6.2.2.1.5 | ProElsMsgLogLevel | RW | mandatory |
column · ProElsMsgLogLevel · read-write · mandatory A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrDisplayLevel variable. A SET of this object to one of the other enumerated values has the effect of disabling ELS events of the specified level to the console. For 2210 platform, this SET changes the configuration parameters and also immediately affects the operational parameters in use by ELS. For other platforms, this SET only affects the configuration parameters and not the current operational parameters in use by ELS. So in order for these changes to take effect, the configuration must be updated. | ||||
| CproElsSubSysTrapEnable | 1.3.6.1.4.1.1.6.2.2.1.6 | ProElsMsgLogLevel | RW | mandatory |
column · ProElsMsgLogLevel · read-write · mandatory A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrTrapLevel variable. A SET of this object to one of the other enumerated values has the effect of enabling ELS events of the specified level to be sent via an SNMP trap. For 2210 platform, this SET changes the configuration parameters and also immediately affects the operational parameters in use by ELS. For other platforms, this SET only affects the configuration parameters and not the current operational parameters in use by ELS. So in order for these changes to take effect, the configuration must be updated. | ||||
| CproElsSubSysTrapDisable | 1.3.6.1.4.1.1.6.2.2.1.7 | ProElsMsgLogLevel | RW | mandatory |
column · ProElsMsgLogLevel · read-write · mandatory A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrTrapLevel variable. A SET of this object to one of the other enumerated values has the effect of disabling ELS events of the specified level to be sent via an SNMP trap. For 2210 platform, this SET changes the configuration parameters and also immediately affects the operational parameters in use by ELS. For other platforms, this SET only affects the configuration parameters and not the current operational parameters in use by ELS. So in order for these changes to take effect, the configuration must be updated. | ||||
| CproElsSubSysCurrDisplayLevel | 1.3.6.1.4.1.1.6.2.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current event log levels that are enabled for display
to console. This information reflects the configuration
values not the current operational parameters in use
by ELS.
The value represents a bit string having a bit defined
for each of the values defined in the ProElsMsgLogLevel
textual convention (excluding the other(1) value, which
is not relevant here.)
The bit string is interpretted as follows:
Bit 15 Bit 1
..............................................
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
..............................................
1 1 1 1 1 1 1 9 8 7 6 5 4 3 2 <== proElsMsgLogLevel
6 5 4 3 2 1 0 value
For example:
proMsgLevelUIError(2), bit 1
proMsgLevelCIError(3), bit 2
etc.
Note also that the levels:
proMsgLevelError
proMsgLevelInfo
proMsgLevelTrace
proMsgLevelStandard
proMsgLevelAll
are aggregates of other logging levels. So, for example,
turning on proMsgLogLevelError(6) will turn on (set the
bits) for all sub-levels in this category (i.e values
2,3,4 and 5).
Although this MIB variable can take on many values based on
what combination of levels is enabled, the following
represents the values of this MIB variable assuming just the
given level is enabled:
Level Set Value
========= =====
proMsgLevelUIError(2) 1
proMsgLevelCIError(3) 2
proMsgLevelUEError(4) 4
proMsgLevelCEError(5) 8
proMsgLevelError(6) 15
proMsgLevelUInfo(7) 16
proMsgLevelCInfo(8) 32
proMsgLevelInfo(9) 48
proMsgLevelPTrace(10) 256
proMsgLevelUTrace(11) 512
proMsgLevelCTrace(12) 1024
proMsgLevelTrace(13) 1792
proMsgLevelAlways(14) 32768
proMsgLevelStandard(15) 31
proMsgLevelAll(16) 61439
No level set 0
A value of 0 means no ELS logging is enabled. | ||||
| CproElsSubSysCurrTrapLevel | 1.3.6.1.4.1.1.6.2.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current event log levels that are enabled for sending
via SNMP trap. This information reflects the configuration
values not the current operational parameters in use
by ELS.
The value represents a bit string having a bit defined
for each of the values defined in the ProElsMsgLogLevel
textual convention (excluding the other(1) value, which
is not relevant here.)
The bit string is interpretted as follows:
Bit 15 Bit 1
..............................................
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
..............................................
1 1 1 1 1 1 1 9 8 7 6 5 4 3 2 <== proElsMsgLogLevel
6 5 4 3 2 1 0 value
For example:
proMsgLevelUIError(2), bit 1
proMsgLevelCIError(3), bit 2
etc.
Note also that the levels:
proMsgLevelError
proMsgLevelInfo
proMsgLevelTrace
proMsgLevelStandard
proMsgLevelAll
are aggregates of other logging levels. So, for example,
turning on proMsgLogLevelError(6) will turn on (set the
bits) for all sub-levels in this category (i.e values
2,3,4 and 5).
Although this MIB variable can take on many values based on
what combination of levels is enabled, the following
represents the values of this MIB variable assuming just the
given level is enabled:
Level Set Value
========= =====
proMsgLevelUIError(2) 1
proMsgLevelCIError(3) 2
proMsgLevelUEError(4) 4
proMsgLevelCEError(5) 8
proMsgLevelError(6) 15
proMsgLevelUInfo(7) 16
proMsgLevelCInfo(8) 32
proMsgLevelInfo(9) 48
proMsgLevelPTrace(10) 256
proMsgLevelUTrace(11) 512
proMsgLevelCTrace(12) 1024
proMsgLevelTrace(13) 1792
proMsgLevelAlways(14) 32768
proMsgLevelStandard(15) 31
proMsgLevelAll(16) 61439
No level set 0
A value of 0 means no ELS logging is enabled. | ||||
| TproElsSubSysEventTable | 1.3.6.1.4.1.1.6.2.3 | NA | mandatory | |
table · not-accessible · mandatory The ELS Sub system event table. | ||||
| RproElsSubSysEventTableEntry | 1.3.6.1.4.1.1.6.2.3.1 | NA | mandatory | |
row · not-accessible · mandatory An entry corresponding to a specific event in the particular subsystem. | ||||
| CproElsSubSysEventIndex | 1.3.6.1.4.1.1.6.2.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The identifier of the event message for a given subsystem. | ||||
| CproElsSubSysEventMsg | 1.3.6.1.4.1.1.6.2.3.1.2 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The unformatted textual description for the message. It provides the message text related to this event and indiates where specific information will be filled in when the message is displayed on the console or sent in an SNMP trap. For example, the text for the IP.008 event is: no rte %I -> %I dsc When sent in an SNMP trap, the variable binding of the trap has this text with the specific IP addresses fillled in. The format of this string is one of the two following formats: If ELS timestamping is enabled: hr:min:sec subsys_name.event_num: message_text For example - 09:32:56 IP.008: no rte 9.7.1.8 -> 9.7.4.3 dsc If ELS timestamping is disabled: subsys_name.event_num: message_text For example - IP.008: no rte 9.7.1.8 -> 9.7.4.3 dsc | ||||
| CproElsSubSysEventCount | 1.3.6.1.4.1.1.6.2.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of times this event has occurred. This number will increment even if the event is not enabled to be displayed on the console or sent in an SNMP trap. | ||||
| CproElsSubSysEventLogLevel | 1.3.6.1.4.1.1.6.2.3.1.4 | ProElsMsgLogLevel | RO | mandatory |
column · ProElsMsgLogLevel · read-only · mandatory The pre-defined setting that classifies this message. | ||||
| CproElsSubSysEventLogToConsole | 1.3.6.1.4.1.1.6.2.3.1.5 | ProElsLogStatus | RW | mandatory |
column · ProElsLogStatus · read-write · mandatory This object indicates whether this event should be logged to the console. For 2210 platform, this SET changes the configuration parameters and also immediately affects the operational parameters in use by ELS. For other platforms, this SET only affects the configuration parameters and not the current operational parameters in use by ELS. So in order for these changes to take effect, the configuration must be updated. | ||||
| CproElsSubSysEventLogToTrap | 1.3.6.1.4.1.1.6.2.3.1.6 | ProElsLogStatus | RW | mandatory |
column · ProElsLogStatus · read-write · mandatory This object indicates whether this event should be sent as an SNMP trap. For 2210 platform, this SET changes the configuration parameters and also immediately affects the operational parameters in use by ELS. For other platforms, this SET only affects the configuration parameters and not the current operational parameters in use by ELS. So in order for these changes to take effect, the configuration must be updated. | ||||
| NproTemp | 1.3.6.1.4.1.1.6.3 | |||
| SproTempScale | 1.3.6.1.4.1.1.6.3.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the scale used when reporting temperature values. If Celsius(1), all temperature values are in degrees Celsius. If Fahrenheit(2), all temperature values are in degrees Fahrenheit.
| ||||
| SproMaxHwTemp | 1.3.6.1.4.1.1.6.3.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This attribute indicates the maximum temperature that the thermometer system can record. This attribute is used as an upper bound for all temperature ranges. | ||||
| SproMinHwTemp | 1.3.6.1.4.1.1.6.3.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This attribute indicates the minimum temperature that the thermometer system can record. This attribute is used as a lower bound for all temperature ranges. | ||||
| SproTempPollPeriod | 1.3.6.1.4.1.1.6.3.4 | INTEGER (10..600) | RO | mandatory |
scalar · INTEGER (10..600) · read-only · mandatory This attribute determines how often the thermometer system will recalculate the current temperature and any temperature range checks. This value represents time in seconds between temperature recalculations. | ||||
| SproCurrentTemp | 1.3.6.1.4.1.1.6.3.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The current ambient temperature of the system. This value is recalculated by the system once per proTempPollPeriod. | ||||
| SproLowTempThreshold | 1.3.6.1.4.1.1.6.3.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature that will cause a Low Temperature
Condition to become true. The Low Temperature Condition will
become true when:
proCurrentTemp <= proLowTempThreshold.
The low temperature condition will reset when:
proCurrentTemp > (proLowTempThreshold + proTempHysteresis).
This range is checked one per proTempPollPeriod. | ||||
| SproHighTempThreshold | 1.3.6.1.4.1.1.6.3.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature that will cause a High Temperature
Condition to become true. The High Temperature Condition will
become true when:
proCurrentTemp >= proHighTempThreshold.
The high temperature condition will reset when:
proCurrentTemp < (proHighTempThreshold - proTempHysteresis).
This range is checked one per proTempPollPeriod. | ||||
| SproTempHysteresis | 1.3.6.1.4.1.1.6.3.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of degrees that the current ambient temperature must drop below proHighTempThreshold or above proLowTempTheshold before the threshold's condition is deactivated. | ||||
| SproHighTempCondition | 1.3.6.1.4.1.1.6.3.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates whether a High Temperature Condition is active. This attribute will be set ON(2) if a High Temperature Condition is active.
| ||||
| SproLowTempCondition | 1.3.6.1.4.1.1.6.3.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates whether a Low Temperature Condition is active. This attribute will be set ON(2) if a Low Temperature Condition is active.
| ||||
| SproHighestTemp | 1.3.6.1.4.1.1.6.3.11 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This is the highest temperature recorded by the router since last reset. | ||||
| SproHighTempTime | 1.3.6.1.4.1.1.6.3.12 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This is the time (in hundreds of seconds) that has elapsed since proHighestTemp was last recorded. | ||||
| SproLowestTemp | 1.3.6.1.4.1.1.6.3.13 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This is the lowest temperature recorded by the router since last reset. | ||||
| SproLowTempTime | 1.3.6.1.4.1.1.6.3.14 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This is the time (in hundreds of seconds) that has elapsed since proLowestTemp was last recorded. | ||||
| NproConfig | 1.3.6.1.4.1.1.6.4 | |||
| NproCfgLoad | 1.3.6.1.4.1.1.6.4.1 | |||
| SproCfgProtocols | 1.3.6.1.4.1.1.6.4.1.1 | DisplayString (SIZE (0..255)) | RO | mandatory |
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory This object returns an ASCII string containing the short names of all protocol types supported in the current load. | ||||
| SproCfgDatalinks | 1.3.6.1.4.1.1.6.4.1.2 | DisplayString (SIZE (0..255)) | RO | mandatory |
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory This object returns an ASCII string containing the short names of all datalink/MAC types supported in the current load. | ||||
| SproCfgFeatures | 1.3.6.1.4.1.1.6.4.1.3 | DisplayString (SIZE (0..255)) | RO | mandatory |
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory This object returns an ASCII string containing the short names of all router features supported in the current load. | ||||
Traps / Notifications
- proElsTrapV1
1.3.6.1.4.1.1.0.1 - proElsTrapV2
1.3.6.1.4.1.1.0.2