IBMHPRROUTETEST-MIB
IBM (https://w3.ibm.com/standards )snmptranslate -m IBMHPRROUTETEST-MIB -Tpsnmpwalk -v2c -c <community> -m IBMHPRROUTETEST-MIB <host> 1.3.6.1.4.1.2Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nibm | 1.3.6.1.4.1.2 | |||
| NibmArchitecture | 1.3.6.1.4.1.2.5 | |||
| Nhpr | 1.3.6.1.4.1.2.5.10 | |||
| NibmHprRouteTest | 1.3.6.1.4.1.2.5.10.4 | |||
| NibmHprRtGlobe | 1.3.6.1.4.1.2.5.10.4.1 | |||
| SibmHprRtGlobeConnTrigger | 1.3.6.1.4.1.2.5.10.4.1.1 | OCTET STRING (SIZE (0 | 10..17)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0 | 10..17)) · read-write · mandatory This object is used to trigger an HPR route test of the
physical path of an existing RTP Connection. The format of
this object is: nceid-length.nceid.tcid, where
- nceid-length: 1 octet. valid values are 1-8.
- nceid: 1-8 octets.
- tcid: 8 octets. | ||||
| SibmHprRtGlobeNameTrigger | 1.3.6.1.4.1.2.5.10.4.1.2 | DisplayString (SIZE (0 | 5..26)) | RW | mandatory |
scalar · DisplayString (SIZE (0 | 5..26)) · read-write · mandatory This object is used to trigger an HPR route test of the
physical path of an existing or non-existing RTP Connection.
The names will be used to generate a HPR Route which may or may
not match an existing RTP Connection; but must be reside on a
current or potential RTP Connection endpoint node. The format
of this object is: netid.lu-name.mode-name, where
- netid: 1-8 octets.
- period: 1 octet.
- lu-name: 1-8 octets.
- period: 1 octet.
- mode-name: 1-8 octets. | ||||
| NibmHprRtGenResults | 1.3.6.1.4.1.2.5.10.4.2 | |||
| TibmHprRtGenTable | 1.3.6.1.4.1.2.5.10.4.2.1 | NA | mandatory | |
table · not-accessible · mandatory The HPR Route Test General Results Table. | ||||
| RibmHprRtGenEntry | 1.3.6.1.4.1.2.5.10.4.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory The HPR Route Test Id is used to index to this table. This Id is an integer that begins at 1 and is incremented with each route test executed on the agent node.
| ||||
| CibmHprRtGenTestId | 1.3.6.1.4.1.2.5.10.4.2.1.1.1 | Gauge | RO | mandatory |
column · Gauge · read-only · mandatory The route test id. This Id is an integer that begins at 1 and is incremented with each route test execution. | ||||
| CibmHprRtGenTestType | 1.3.6.1.4.1.2.5.10.4.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The route test type. This indicates whether the route test
was triggered by setting the:
1. global connection trigger, or
2. global name trigger.
| ||||
| CibmHprRtGenConnTrigger | 1.3.6.1.4.1.2.5.10.4.2.1.1.3 | OCTET STRING (SIZE (0 | 10..17)) | RO | mandatory |
column · OCTET STRING (SIZE (0 | 10..17)) · read-only · mandatory This object will be valid if the route test was triggered by
setting the global connection trigger. If the route test was
triggered by setting the global name trigger, this object will
return the zero-length string. When it is not null, the format
of this object is: nceid-length.nceid.tcid, where
- nceid-length: 1 octet. valid values are 1-8.
- nceid: 1-8 octets.
- tcid: 8 octets. | ||||
| CibmHprRtGenNameTrigger | 1.3.6.1.4.1.2.5.10.4.2.1.1.4 | DisplayString (SIZE (0 | 5..26)) | RO | mandatory |
column · DisplayString (SIZE (0 | 5..26)) · read-only · mandatory This object will be valid if the route test was triggered by
setting the global name trigger. If the route test was
triggered by setting the global connection trigger, this object
will return the zero-length string. When it is not null, the
format of this object is: netid.lu-name.mode-name, where
- netid: 1-8 octets.
- period: 1 octet.
- lu-name: 1-8 octets.
- period: 1 octet.
- mode-name: 1-8 octets. | ||||
| CibmHprRtGenResult | 1.3.6.1.4.1.2.5.10.4.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The route test result. This indicates whether the route test
was:
1. successfully executed, or
2. in progress and has not completed yet, or
3. no response was received from one or more nodes, or
4. the nce id used to trigger the route test was invalid, or
5. the tcid used to trigger the route test was invalid, or
6. the lu name used to trigger the route test was invalid, or
7. the mode name used to trigger the route test was invalid
for the lu name specified, or
8. a contiguous hpr route from this node to the target lu
does not exist and cannot be created.
| ||||
| CibmHprRtGenSenseCode | 1.3.6.1.4.1.2.5.10.4.2.1.1.6 | OCTET STRING (SIZE (4)) | RO | mandatory |
column · OCTET STRING (SIZE (4)) · read-only · mandatory The SNA sense data that corresponds to the route test result. | ||||
| CibmHprRtGenCosName | 1.3.6.1.4.1.2.5.10.4.2.1.1.7 | DisplayString (SIZE (1..8)) | RO | mandatory |
column · DisplayString (SIZE (1..8)) · read-only · mandatory The class of service name used for this route test. | ||||
| CibmHprRtGenRscv | 1.3.6.1.4.1.2.5.10.4.2.1.1.8 | OCTET STRING (SIZE (0..255)) | RO | mandatory |
column · OCTET STRING (SIZE (0..255)) · read-only · mandatory The route selection control vector used for this route test. | ||||
| NibmHprRtDetResults | 1.3.6.1.4.1.2.5.10.4.3 | |||
| TibmHprRtDetTable | 1.3.6.1.4.1.2.5.10.4.3.1 | NA | mandatory | |
table · not-accessible · mandatory The HPR Route Test Detailed Results Table. | ||||
| RibmHprRtDetEntry | 1.3.6.1.4.1.2.5.10.4.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory The HPR Route Test Id and HPR Route Sub Test Id are used to index this table. The Test Id is an integer that begins at 1 and is incremented with each route test execution. The Sub Test Id is an integer that begins at 1 and is incremented with each node along the path being tested. | ||||
| CibmHprRtDetTestId | 1.3.6.1.4.1.2.5.10.4.3.1.1.1 | Gauge | RO | mandatory |
column · Gauge · read-only · mandatory The route test id. This Id is an integer that begins at 1 and is incremented with each route test execution. If this object has the same value as the ibmHprRtGenTestId, then the two objects apply to the same route test. | ||||
| CibmHprRtDetSubTestId | 1.3.6.1.4.1.2.5.10.4.3.1.1.2 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The sub test id. This Id is an integer that begins at 1 and is incremented with each node along the path being tested. The last entry of the test will be designated by a value 255. | ||||
| CibmHprRtDetDestNode | 1.3.6.1.4.1.2.5.10.4.3.1.1.3 | DisplayString (SIZE (0..17)) | RO | mandatory |
column · DisplayString (SIZE (0..17)) · read-only · mandatory The destination node name for this portion of the route test. | ||||
| CibmHprRtDetPriorNode | 1.3.6.1.4.1.2.5.10.4.3.1.1.4 | DisplayString (SIZE (0..17)) | RO | mandatory |
column · DisplayString (SIZE (0..17)) · read-only · mandatory The name of the node which is prior to the destination node for this portion of the route test. | ||||
| CibmHprRtDetLastTgNumber | 1.3.6.1.4.1.2.5.10.4.3.1.1.5 | INTEGER (0..255) | RO | mandatory |
column · INTEGER (0..255) · read-only · mandatory The last TG number for this portion of the route test. | ||||
| CibmHprRtDetRtripTime | 1.3.6.1.4.1.2.5.10.4.3.1.1.6 | Gauge | RO | mandatory |
column · Gauge · read-only · mandatory The round trip time for this portion of the route test. It is the total time from when the test frame was sent by this node to the time when the test frame was received back at this node. | ||||
| CibmHprRtDetResult | 1.3.6.1.4.1.2.5.10.4.3.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The result of this portion of the route test. It indicates
whether this portion of the route test was:
1. successfully executed, or
2. no response was received.
| ||||