IBMESCONCUB-MIB
IBM (https://w3.ibm.com/standards )snmptranslate -m IBMESCONCUB-MIB -Tpsnmpwalk -v2c -c <community> -m IBMESCONCUB-MIB <host> 1.3.6.1.4.1.2.6.119.4.14Imports
| IF-MIB | ifIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| SNMPv2-TC-v1 | MacAddress |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NibmIROCescon | 1.3.6.1.4.1.2.6.119.4.14 | |||
| NesconPortData | 1.3.6.1.4.1.2.6.119.4.14.1 | |||
| TesconPortTable | 1.3.6.1.4.1.2.6.119.4.14.1.1 | NA | mandatory | |
table · not-accessible · mandatory Table of objects that describe an ESCON channel port. | ||||
| ResconPortEntry | 1.3.6.1.4.1.2.6.119.4.14.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Table of objects that describe an ESCON channel port. This table is indexed by ifIndex from MIB-II.
| ||||
| CesconPortInFiberStatus | 1.3.6.1.4.1.2.6.119.4.14.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of the fiber into this device from the host:
inLoff = the light is off on the fiber into
this device from the host
inOls = the fiber into this device from the
host is in an intermediate state between
light-off and light-on
inIdle = the fiber into this device from the
host is in the light-on state, and is
ready to transfer data from the host to
this device
inUnknown = the agent cannot determine the status of
the fiber into this device from the host
| ||||
| CesconPortOutFiberStatus | 1.3.6.1.4.1.2.6.119.4.14.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of the fiber out of this device to the host:
outDisableReq = out disable obtained; the fiber
out of this device into the host
is not in the light-on state
outDisableForced = out ESCON emits OLS; the fiber
out of this device into the host
is not in the light-on state
outLoffForced = out ESCON forced light-off; the fiber
out of this device into the host
is not in the light-on state
outOls = the fiber out of this device into the
host is in an intermediate state
between light-off and light-on
outOlsforced = out ESCON forced OLS; the fiber
out of this device into the host
is not in the light-on state
outEnable = the fiber out of this device into the
host is in the light-on state, and is
ready to transfer data from this
device to the host
outError = the status of the fiber out of this
device to the host is none of those
listed above. This is a state that
should not occur
| ||||
| NesconLinkData | 1.3.6.1.4.1.2.6.119.4.14.2 | |||
| TesconLinkTable | 1.3.6.1.4.1.2.6.119.4.14.2.1 | NA | mandatory | |
table · not-accessible · mandatory Table of objects that describe an ESCON channel link. | ||||
| ResconLinkEntry | 1.3.6.1.4.1.2.6.119.4.14.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Table of objects that describe an ESCON channel link. This table is indexed by ifIndex from MIB-II, by host link address, (host) control unit address, and by (host) partition number. | ||||
| CesconLinkHostLinkAddress | 1.3.6.1.4.1.2.6.119.4.14.2.1.1.1 | OCTET STRING (SIZE (1)) | NA | mandatory |
column · OCTET STRING (SIZE (1)) · not-accessible · mandatory This address identifies the ESCON Director port to which the optical fiber between the ESCON Director and the host is attached. | ||||
| CesconLinkControlUnitAddress | 1.3.6.1.4.1.2.6.119.4.14.2.1.1.2 | OCTET STRING (SIZE (1)) | NA | mandatory |
column · OCTET STRING (SIZE (1)) · not-accessible · mandatory A number identifying a logical control unit within an actual host. | ||||
| CesconLinkPartitionNumber | 1.3.6.1.4.1.2.6.119.4.14.2.1.1.3 | OCTET STRING (SIZE (1)) | NA | mandatory |
column · OCTET STRING (SIZE (1)) · not-accessible · mandatory A number identifying a logical host within an actual host. | ||||
| CesconLinkStatus | 1.3.6.1.4.1.2.6.119.4.14.2.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Gives the status of the link: hlpNotEstab = Host Logical Path not established hlpEstab = Host Logical Path established hlpError = Host Logical Path error
| ||||
| NesconStationData | 1.3.6.1.4.1.2.6.119.4.14.3 | |||
| TesconStationTable | 1.3.6.1.4.1.2.6.119.4.14.3.1 | NA | mandatory | |
table · not-accessible · mandatory Table of objects that describe an ESCON channel station. | ||||
| ResconStationEntry | 1.3.6.1.4.1.2.6.119.4.14.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Table of objects that describe an ESCON channel station. This table is indexed by ifIndex from MIB-II, by host link address, by (host) control unit address, by (host) partition number, and by ESCON device address. | ||||
| CesconStationHostLinkAddress | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.1 | OCTET STRING (SIZE (1)) | NA | mandatory |
column · OCTET STRING (SIZE (1)) · not-accessible · mandatory This address identifies the ESCON Director port to which the optical fiber between the ESCON Director and the host is attached. | ||||
| CesconStationControlUnitAddress | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.2 | OCTET STRING (SIZE (1)) | NA | mandatory |
column · OCTET STRING (SIZE (1)) · not-accessible · mandatory A number identifying a logical control unit within an actual host. | ||||
| CesconStationPartitionNumber | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.3 | OCTET STRING (SIZE (1)) | NA | mandatory |
column · OCTET STRING (SIZE (1)) · not-accessible · mandatory A number identifying a logical host within an actual host. | ||||
| CesconStationDeviceAddress | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.4 | OCTET STRING (SIZE (1)) | NA | mandatory |
column · OCTET STRING (SIZE (1)) · not-accessible · mandatory A unique hexadecimal number allocated to each station on the same host link. | ||||
| CesconStationState | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current state of the station.
| ||||
| CesconStationAttentionDelay | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.6 | INTEGER (0..420) | RW | mandatory |
column · INTEGER (0..420) · read-write · mandatory Specifies the amount of time in seconds that elapses from the receipt of a packet at an ESCON station (when no other packets are queued) before that station sends buffered data to the Host. An update to this object takes effect the next time the station establishes communications with the host. | ||||
| CesconStationAttentionTimeOut | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.7 | INTEGER (10..840) | RW | mandatory |
column · INTEGER (10..840) · read-write · mandatory Specifies the amount of time in seconds that the station is to wait for a response to an attention signal it sent to the host before initiating channel disconnect. An update to this object takes effect the next time the station establishes communications with the host. | ||||
| CesconStationMaxBfru | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.8 | INTEGER (1..65535) | RO | mandatory |
column · INTEGER (1..65535) · read-only · mandatory Number of buffers in the host buffer pool for receiving data from this station. | ||||
| CesconStationUnitSize | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.9 | INTEGER (64..4000) | RO | mandatory |
column · INTEGER (64..4000) · read-only · mandatory Maximum size of a buffer, in bytes, that the host can receive from this station. | ||||
| CesconStationMaxMsgSizeReceived | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.10 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory The maximum length of a message that can be received on this station. An update to this object takes effect the next time the station establishes communications with the host. | ||||
| CesconStationMaxMsgSizeSent | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.11 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory The maximum length of a message that can be sent from this station to the host. An update to this object takes effect the next time the station establishes communications with the host. | ||||
| CesconStationDataPacketsOkReceived | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.12 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of data packets received from the host by this station without Data Check. | ||||
| CesconStationDataPacketsKoReceived | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.13 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of data packets received from the host by this station with Data Check. | ||||
| CesconStationDataPacketsSent | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.14 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of data packets sent to the host by this station. | ||||
| CesconStationTotalFramesSent | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.15 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of data packets and control packets sent to the host by this station. | ||||
| CesconStationDataPacketsRetransmitted | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.16 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of data packets retransmitted by this station | ||||
| CesconStationPositiveAckDataPackets | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.17 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of data packets sent by this station to the host that the host has positively acknowledged. When the host sends a positive acknowledgement for a group of n data packets, this counter is incremented by n. | ||||
| CesconStationSecondChanceAttentions | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.18 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times this station has sent a Second Chance Attention signal to the host. | ||||
| CesconStationCommandsRetried | 1.3.6.1.4.1.2.6.119.4.14.3.1.1.19 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times a command has been retried on this station | ||||
| NesconConformance | 1.3.6.1.4.1.2.6.119.4.14.4 | |||