IBM-GbTOR-G8264CS-MIB
IBM eServer XMIB for IBM Networking Operating System RackSwitch G8264CS All Rights reserved DEVICE VERSION: 7.8.10.0
snmptranslate -m IBM-GbTOR-G8264CS-MIB -Tpsnmpwalk -v2c -c <community> -m IBM-GbTOR-G8264CS-MIB <host> 1.3.6.1.4.1.20301.3Imports
| BRIDGE-MIB | BridgeId, dot1dBasePort, dot1dBasePortEntry, dot1dBridge, dot1dTp, dot1dTpPort |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv6, InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString, SnmpEngineID, SnmpMessageProcessingModel, SnmpSecurityLevel, SnmpSecurityModel |
| SNMP-USER-BASED-SM-MIB | usmNoAuthProtocol, usmNoPrivProtocol |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysContact, sysLocation, sysName |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, mib-2 |
| SNMPv2-TC | AutonomousType, DisplayString, MacAddress, PhysAddress, RowPointer, RowStatus, StorageType, TAddress, TDomain, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nibmnetwork | 1.3.6.1.4.1.20301 | |||
| Nregistration | 1.3.6.1.4.1.20301.1 | |||
| Nibm-switch | 1.3.6.1.4.1.20301.1.7 | |||
| Ng8264CS | 1.3.6.1.4.1.20301.1.7.15 | |||
| Nprivate-mibs | 1.3.6.1.4.1.20301.2 | |||
| Nibm-switch-mgmt | 1.3.6.1.4.1.20301.2.7 | |||
| Ng8264CS-mgmt | 1.3.6.1.4.1.20301.2.7.15 | |||
| Nagent | 1.3.6.1.4.1.20301.2.7.15.1 | |||
| NagentConfig | 1.3.6.1.4.1.20301.2.7.15.1.1 | |||
| NagSystem | 1.3.6.1.4.1.20301.2.7.15.1.1.1 | |||
| SagApplyConfiguration | 1.3.6.1.4.1.20301.2.7.15.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new configuration block. other(1) is returned when this object ie read.
| ||||
| SagSavePending | 1.3.6.1.4.1.20301.2.7.15.1.1.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
| ||||
| SagSaveConfiguration | 1.3.6.1.4.1.20301.2.7.15.1.1.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.
| ||||
| SagRevert | 1.3.6.1.4.1.20301.2.7.15.1.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new configuration block. other(1) is returned when this object is read.
| ||||
| SagRevertApply | 1.3.6.1.4.1.20301.2.7.15.1.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read.
| ||||
| SagReset | 1.3.6.1.4.1.20301.2.7.15.1.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to reboot the agent. other(1) is returned always when read.
| ||||
| SagConfigForNxtReset | 1.3.6.1.4.1.20301.2.7.15.1.1.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block
| ||||
| SagImageForNxtReset | 1.3.6.1.4.1.20301.2.7.15.1.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2
| ||||
| SagSoftwareVersion | 1.3.6.1.4.1.20301.2.7.15.1.1.1.10 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available. | ||||
| SagBootVer | 1.3.6.1.4.1.20301.2.7.15.1.1.1.11 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. | ||||
| SagImage1Ver | 1.3.6.1.4.1.20301.2.7.15.1.1.1.12 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SagImage2Ver | 1.3.6.1.4.1.20301.2.7.15.1.1.1.13 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SagRtcDate | 1.3.6.1.4.1.20301.2.7.15.1.1.1.14 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available. | ||||
| SagRtcTime | 1.3.6.1.4.1.20301.2.7.15.1.1.1.15 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available. | ||||
| SagLastSetErrorReason | 1.3.6.1.4.1.20301.2.7.15.1.1.1.16 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The error reason of the last SET failure. | ||||
| SagCurCfgHttpServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.17 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the HTTP server is listening to in the current configuration block. | ||||
| SagNewCfgHttpServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.18 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the HTTP server is listening to in the new configuration block. | ||||
| SagCurCfgLoginBanner | 1.3.6.1.4.1.20301.2.7.15.1.1.1.19 | DisplayString (SIZE (0..80)) | RO | |
scalar · DisplayString (SIZE (0..80)) · read-only · current The user defined login banner. | ||||
| SagNewCfgLoginBanner | 1.3.6.1.4.1.20301.2.7.15.1.1.1.20 | DisplayString (SIZE (0..80)) | RW | |
scalar · DisplayString (SIZE (0..80)) · read-write · current The user defined login banner. | ||||
| SagCurCfgConsole | 1.3.6.1.4.1.20301.2.7.15.1.1.1.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable console output of syslog messages.
| ||||
| SagNewCfgConsole | 1.3.6.1.4.1.20301.2.7.15.1.1.1.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable console output of syslog messages.
| ||||
| SagCurCfgBootp | 1.3.6.1.4.1.20301.2.7.15.1.1.1.29 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable the use of BootP, as currently configured in the current configuration block.
| ||||
| SagNewCfgBootp | 1.3.6.1.4.1.20301.2.7.15.1.1.1.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable the use of BootP, in the new configuration block.
| ||||
| SagSlotNumber | 1.3.6.1.4.1.20301.2.7.15.1.1.1.31 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning. | ||||
| SagCurCfgSnmpTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.1.32 | INTEGER (1..30) | RO | |
scalar · INTEGER (1..30) · read-only · current Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user. | ||||
| SagNewCfgSnmpTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.1.33 | INTEGER (1..30) | RW | |
scalar · INTEGER (1..30) · read-write · current Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user. | ||||
| SagCurCfgTelnetServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.34 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the telnet server listens for telnet sessions. | ||||
| SagNewCfgTelnetServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.35 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the telnet server listens for telnet sessions. | ||||
| SagClearFlashDump | 1.3.6.1.4.1.20301.2.7.15.1.1.1.36 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to clear the FLASH dump. ok(1) is returned when this object is read.
| ||||
| SagCurCfgTrapSrcIf | 1.3.6.1.4.1.20301.2.7.15.1.1.1.39 | Integer32 | RO | |
scalar · Integer32 · read-only · current The SNMP trap source interface number. | ||||
| SagNewCfgTrapSrcIf | 1.3.6.1.4.1.20301.2.7.15.1.1.1.40 | Integer32 | RW | |
scalar · Integer32 · read-write · current The SNMP trap source interface number. | ||||
| SagCurCfgHttpsServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.49 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the HTTPS server is listening to in the current configuration block. | ||||
| SagNewCfgHttpsServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.50 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the HTTPS server is listening to in the new configuration block. | ||||
| SagCurCfgTftpServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.51 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the TFTP server is listening to in the current configuration block. | ||||
| SagNewCfgTftpServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.52 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the TFTP server is listening to in the new configuration block. | ||||
| SagRackId | 1.3.6.1.4.1.20301.2.7.15.1.1.1.53 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The rack unique identifier. | ||||
| SagChassis | 1.3.6.1.4.1.20301.2.7.15.1.1.1.54 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current Chassis serial number. | ||||
| SagCurTimeZone | 1.3.6.1.4.1.20301.2.7.15.1.1.1.55 | INTEGER | RO | |
scalar · INTEGER · read-only · current The time zone. Note: Locations are alphabetically ordered and the corresponding code is not reflected in CLI.
| ||||
| SagNewTimeZone | 1.3.6.1.4.1.20301.2.7.15.1.1.1.56 | INTEGER | RW | |
scalar · INTEGER · read-write · current The time zone. Note: Locations are alphabetically ordered and the corresponding code is not reflected in CLI.
| ||||
| SagCurCfgIdleCLITimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.1.57 | Integer32 | RO | |
scalar · Integer32 · read-only · current Set idle CLI sessions timeout. | ||||
| SagNewCfgIdleCLITimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.1.58 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set idle CLI sessions timeout. | ||||
| SagCurCfgHttpsServerAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.1.62 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current HTTPS server access state.
| ||||
| SagNewCfgHttpsServerAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.1.63 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable HTTPS server access.
| ||||
| SagCurBootNxtCliMode | 1.3.6.1.4.1.20301.2.7.15.1.1.1.64 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current boot mode.
| ||||
| SagNewBootNxtCliMode | 1.3.6.1.4.1.20301.2.7.15.1.1.1.65 | INTEGER | RW | |
scalar · INTEGER · read-write · current Next cli boot mode.
| ||||
| SagCurHttpAcces | 1.3.6.1.4.1.20301.2.7.15.1.1.1.66 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current HTTP server access state.
| ||||
| SagNewHttpAcces | 1.3.6.1.4.1.20301.2.7.15.1.1.1.67 | INTEGER | RW | |
scalar · INTEGER · read-write · current New HTTP server access state.
| ||||
| SagCurCfgDhcp | 1.3.6.1.4.1.20301.2.7.15.1.1.1.68 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable the use of DHCP, as currently configured in the current configuration block.
| ||||
| SagNewCfgDhcp | 1.3.6.1.4.1.20301.2.7.15.1.1.1.69 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable the use of DHCP, in the new configuration block.
| ||||
| SagCurCfgReminders | 1.3.6.1.4.1.20301.2.7.15.1.1.1.70 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of reminders feature.
| ||||
| SagNewCfgReminders | 1.3.6.1.4.1.20301.2.7.15.1.1.1.71 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable reminders feature.
| ||||
| SagCurCfgHprompt | 1.3.6.1.4.1.20301.2.7.15.1.1.1.72 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of hprompt.
| ||||
| SagNewCfgHprompt | 1.3.6.1.4.1.20301.2.7.15.1.1.1.73 | INTEGER | RW | |
scalar · INTEGER · read-write · current New status of hprompt.
| ||||
| SagCurCfgUserBBI | 1.3.6.1.4.1.20301.2.7.15.1.1.1.74 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of user configuration from BBI.
| ||||
| SagNewCfgUserBBI | 1.3.6.1.4.1.20301.2.7.15.1.1.1.75 | INTEGER | RW | |
scalar · INTEGER · read-write · current New status of user configuration from BBI.
| ||||
| SagCurBootNxtCliModePrompt | 1.3.6.1.4.1.20301.2.7.15.1.1.1.76 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of selectable CLI mode prompt.
| ||||
| SagNewBootNxtCliModePrompt | 1.3.6.1.4.1.20301.2.7.15.1.1.1.77 | INTEGER | RW | |
scalar · INTEGER · read-write · current Next status of selectable CLI mode prompt.
| ||||
| SagCurCfgLoginNotice | 1.3.6.1.4.1.20301.2.7.15.1.1.1.78 | DisplayString (SIZE (0..80)) | RO | |
scalar · DisplayString (SIZE (0..80)) · read-only · current The user defined login notice. | ||||
| SagNewCfgLoginNotice | 1.3.6.1.4.1.20301.2.7.15.1.1.1.79 | DisplayString (SIZE (0..80)) | RW | |
scalar · DisplayString (SIZE (0..80)) · read-write · current The user defined login notice. | ||||
| SagCurCfgSysCustomDstState | 1.3.6.1.4.1.20301.2.7.15.1.1.1.98 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of Custom DST
| ||||
| SagNewCfgSysCustomDstState | 1.3.6.1.4.1.20301.2.7.15.1.1.1.99 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable Custom DST
| ||||
| SagCurCfgSysCustomDstStart | 1.3.6.1.4.1.20301.2.7.15.1.1.1.100 | DisplayString (SIZE (0..8)) | RO | |
scalar · DisplayString (SIZE (0..8)) · read-only · current The current Custom DST start rule | ||||
| SagNewCfgSysCustomDstStart | 1.3.6.1.4.1.20301.2.7.15.1.1.1.101 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current Set Custom DST start rule | ||||
| SagCurCfgSysCustomDstEnd | 1.3.6.1.4.1.20301.2.7.15.1.1.1.102 | DisplayString (SIZE (0..8)) | RO | |
scalar · DisplayString (SIZE (0..8)) · read-only · current The current Custom DST end rule | ||||
| SagNewCfgSysCustomDstEnd | 1.3.6.1.4.1.20301.2.7.15.1.1.1.103 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current Set Custom DST end rule | ||||
| SagHavePanicDump | 1.3.6.1.4.1.20301.2.7.15.1.1.1.104 | INTEGER | RO | |
scalar · INTEGER · read-only · current The presence of a panic dump in the flash memory.
| ||||
| SagCurCfgResetControl | 1.3.6.1.4.1.20301.2.7.15.1.1.1.111 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current reset control state.
| ||||
| SagNewCfgResetControl | 1.3.6.1.4.1.20301.2.7.15.1.1.1.112 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable reset control after panic.
| ||||
| SagCurCfgSysDlight | 1.3.6.1.4.1.20301.2.7.15.1.1.1.113 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current daylight savings time status.
| ||||
| SagNewCfgSysDlight | 1.3.6.1.4.1.20301.2.7.15.1.1.1.114 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable daylight savings time.
| ||||
| SagCurCfgErrDisableRecovery | 1.3.6.1.4.1.20301.2.7.15.1.1.1.115 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object indicates whether the system will automatically re-enable an error-disabled port after the time interval indicated by agCurCfgErrDisableTimeout has elapsed. A port is in error-disabled state when it has been operationally disabled due to abnormal conditions detected on the port. An error-disabled port will only be automatically re-enabled by the system if and only if this object and the port's agPortCurCfgErrDisableRecovery object both have a value of 'enable(1)'.
| ||||
| SagNewCfgErrDisableRecovery | 1.3.6.1.4.1.20301.2.7.15.1.1.1.116 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object specifies whether the system should automatically re-enable an error-disabled port. Use this object to change the global setting of the error-disable recovery action.
| ||||
| SagCurCfgErrDisableTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.1.117 | INTEGER (30..86400) | RO | |
scalar · INTEGER (30..86400) · read-only · current This object indicates the time, in seconds, that the system will wait before it automatically re-enables any port that is in error-disabled state.
| ||||
| SagNewCfgErrDisableTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.1.118 | INTEGER (30..86400) | RW | |
scalar · INTEGER (30..86400) · read-write · current This object specifies the time, in seconds, that the system should wait before it automatically re-enables a port that is in error-disabled state. Use this object to change the global error-disable timeout value.
| ||||
| SagCurCfgTelnetAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.1.119 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current telnet access state.
| ||||
| SagNewCfgTelnetAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.1.120 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable telnet access.
| ||||
| SagCurCfgDcbx | 1.3.6.1.4.1.20301.2.7.15.1.1.1.121 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current DCBX state.
| ||||
| SagNewCfgDcbx | 1.3.6.1.4.1.20301.2.7.15.1.1.1.122 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable DCBX feature.
| ||||
| SserverPortsCurCfgPorts | 1.3.6.1.4.1.20301.2.7.15.1.1.1.127 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The current configured server port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the server ports list
0 - The represented port does not belong to the server ports list | ||||
| SserverPortsNewCfgPorts | 1.3.6.1.4.1.20301.2.7.15.1.1.1.128 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current New configuration server port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the server ports list
0 - The represented port does not belong to the server ports list | ||||
| SserverPortsNewCfgAddPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.129 | PortNumber | RC | |
scalar · PortNumber · read-create · current The port to be added to the server ports list. A '0' value is returned when read. | ||||
| SserverPortsNewCfgRemovePort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.130 | PortNumber | RC | |
scalar · PortNumber · read-create · current The port to be removed from the server ports list. A '0' value is returned when read. | ||||
| SagNetboot | 1.3.6.1.4.1.20301.2.7.15.1.1.1.133 | INTEGER | RW | |
scalar · INTEGER · read-write · current Ena/dis loading of config over n/w during bootup
| ||||
| SagNetbootTftpAddr | 1.3.6.1.4.1.20301.2.7.15.1.1.1.134 | IpAddress | RW | |
scalar · IpAddress · read-write · current Tftp server address from where config file needs to be downloaded | ||||
| SagNetbootCfgFile | 1.3.6.1.4.1.20301.2.7.15.1.1.1.135 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Config file location on tftp server | ||||
| SagCurCfgLinkscanMode | 1.3.6.1.4.1.20301.2.7.15.1.1.1.136 | INTEGER | RO | |
scalar · INTEGER · read-only · current Set linkscan mode
| ||||
| SagNewCfgLinkscanMode | 1.3.6.1.4.1.20301.2.7.15.1.1.1.137 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set linkscan mode
| ||||
| SagUSBboot | 1.3.6.1.4.1.20301.2.7.15.1.1.1.138 | INTEGER | RW | |
scalar · INTEGER · read-write · current Ena/dis USB Boot capability
| ||||
| SagCurServiceLED | 1.3.6.1.4.1.20301.2.7.15.1.1.1.139 | INTEGER | RO | |
scalar · INTEGER · read-only · current Ena/dis Service Required LED
| ||||
| SagNewServiceLED | 1.3.6.1.4.1.20301.2.7.15.1.1.1.140 | INTEGER | RW | |
scalar · INTEGER · read-write · current Ena/dis Service Required LED
| ||||
| SagUSBeject | 1.3.6.1.4.1.20301.2.7.15.1.1.1.141 | INTEGER | RW | |
scalar · INTEGER · read-write · current Eject USB - eject(1) Get current USB state: usbready(2) - USB mounted nousb(3) - no USB mounted
| ||||
| SagCurRFC4741NetconfAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.1.142 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current NETCONF server access state.
| ||||
| SagNewRFC4741NetconfAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.1.143 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable NETCONF server access state.
| ||||
| SagCurRFC4741NetconfSessionTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.1.144 | INTEGER (60..3600) | RO | |
scalar · INTEGER (60..3600) · read-only · current Once NETCONF session setup, NETCONF server will allocate resource for this session. agCurRFC4741NetconfSessionTimeout indicates the number of seconds before the resources are freed if there is no operation on this session | ||||
| SagNewRFC4741NetconfSessionTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.1.145 | INTEGER (60..3600) | RW | |
scalar · INTEGER (60..3600) · read-write · current Once NETCONF session setup, NETCONF server will allocate resource for this session. agNewRFC4741NetconfSessionTimeout specifies the number of seconds before the resources are freed if there is no operation on this session | ||||
| SagCurRFC4741NetconfSshAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.1.146 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current NETCONF server over SSH access state.
| ||||
| SagNewRFC4741NetconfSshAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.1.147 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable NETCONF server over SSH access state.
| ||||
| SagCurRFC4741NetconfSshPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.148 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the NETCONF server over SSH is listening to in the current configuration block. | ||||
| SagNewRFC4741NetconfSshPort | 1.3.6.1.4.1.20301.2.7.15.1.1.1.149 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the NETCONF server over SSH is listening to in the new configuration block. | ||||
| SagCurCfgLFDStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.1.158 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object indicates whether the system will put any port in an error-disabled state due to excessive link flaps. A port will be put in an error-disabled state due to excessive link flaps if this object and the port's agPortCurCfgLFDStatus object both have a value of 'enable'. A port has an excessive number of link flaps if the number of link flaps detected during a time period in seconds indicated by agCurCfgLFDTime exceeds the maximum number of allowed flaps indicated by agCurCfgLFDFlaps.
| ||||
| SagNewCfgLFDStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.1.159 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates whether the system should put any port in an error-disabled state due to excessive link flaps. Use this object to change the global setting of the Link Flap Dampening error-disable action.
| ||||
| SagCurCfgLFDFlaps | 1.3.6.1.4.1.20301.2.7.15.1.1.1.160 | INTEGER (1..100) | RO | |
scalar · INTEGER (1..100) · read-only · current This object indicates the maximum number of flaps allowed in a time period set by agCurCfgLFDTime. | ||||
| SagNewCfgLFDFlaps | 1.3.6.1.4.1.20301.2.7.15.1.1.1.161 | INTEGER (1..100) | RW | |
scalar · INTEGER (1..100) · read-write · current This object specifies the maximum number of flaps that should be allowed in a time period. Use this object to change the global maximum number of flaps allowed in a time period. | ||||
| SagCurCfgLFDTime | 1.3.6.1.4.1.20301.2.7.15.1.1.1.162 | INTEGER (5..500) | RO | |
scalar · INTEGER (5..500) · read-only · current This object indicates the length of time period in seconds during which link flaps are counted.
| ||||
| SagNewCfgLFDTime | 1.3.6.1.4.1.20301.2.7.15.1.1.1.163 | INTEGER (5..500) | RW | |
scalar · INTEGER (5..500) · read-write · current This object specifies the length of time period in seconds that should be used to count link flaps.
| ||||
| SagCurCfgTrapSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.1.164 | INTEGER | RO | |
scalar · INTEGER · read-only · current The index of the loopback interface that should be used for the source IP of the SNMP trap; 0 means that no loopback interface is used as the source of the SNMP trap. | ||||
| SagNewCfgTrapSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.1.165 | INTEGER | RW | |
scalar · INTEGER · read-write · current The index of the loopback interface that should be used for the source IP of the SNMP trap; 0 means that no loopback interface is used as the source of the SNMP trap. | ||||
| SagCfgMtm | 1.3.6.1.4.1.20301.2.7.15.1.1.1.166 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object specifies the new value for MTM.
The available MTM values are:
1455-64F (1)
7309-DFX (2)
7309-DRX (3)
7309-HCM (4)
7309-HCK (5)
7120-64F (6)
| ||||
| SagNewSecurityMode | 1.3.6.1.4.1.20301.2.7.15.1.1.1.177 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to change switch security mode. There are thtree security modes for IBM switch: strict mode, compatibility mode and strict mode with SNMP not comply. Strict mode: Strict mode will have higher security level. Encryption algorithms in strict mode will be compliance with the NIST SP 800-131A. Detailed information please refer NIST SP 800-131A mode Functional Specification. SSH will be enabled by default in strict mode for all platforms. It's strict(1) in this node. Compatibility mode: This is the default mode when switch first boot up. MD5/SHA/DES are selected as Hash/Encryption algorithms. It's compatibility(2) in this node. Strict mode with SNMP not comply: To provide backward compatibility option, insecure MD5/DES are supported. It's strictsnmpolduser(3) in this node. The next time reload security mode is returned when this object ie read.
| ||||
| SagNewCfgSslVersionLevel | 1.3.6.1.4.1.20301.2.7.15.1.1.1.178 | INTEGER | RW | |
scalar · INTEGER · read-write · current New status of SSL Server Minimum Acceptable Protocol Version.
| ||||
| SagCurCfgSslVersionLevel | 1.3.6.1.4.1.20301.2.7.15.1.1.1.179 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of SSL Server Minimum Acceptable Protocol Version.
| ||||
| SagCurSecurityMode | 1.3.6.1.4.1.20301.2.7.15.1.1.1.180 | INTEGER | RO | |
scalar · INTEGER · read-only · current This is an action object to change switch security mode. There are thtree security modes for IBM switch: strict mode, compatibility mode and strict mode with SNMP not comply. Strict mode: Strict mode will have higher security level. Encryption algorithms in strict mode will be compliance with the NIST SP 800-131A. Detailed information please refer NIST SP 800-131A mode Functional Specification. SSH will be enabled by default in strict mode for all platforms. It's strict(1) in this node. Compatibility mode: This is the default mode when switch first boot up. MD5/SHA/DES are selected as Hash/Encryption algorithms. It's compatibility(2) in this node. Strict mode with SNMP not comply: To provide backward compatibility option, insecure MD5/DES are supported. It's strictsnmpolduser(3) in this node. The current security mode is returned when this object ie read.
| ||||
| NagPortConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.2 | |||
| SagPortTableMaxEnt | 1.3.6.1.4.1.20301.2.7.15.1.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the port configuration host table. | ||||
| TagPortCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2 | NA | ||
table · not-accessible · current The table of port configuration in the current configuration block. | ||||
| RagPortCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1 | NA | ||
row · not-accessible · current A row in the port table in the current configuration block.
| ||||
| CagPortCurCfgIndx | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in port configurations table. | ||||
| CagPortCurCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This is the state of the port.
| ||||
| CagPortCurCfgVlanTag | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This is VLAN tag state of the port
| ||||
| CagPortCurCfgRmon | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to turn RMON on or off on the port.
| ||||
| CagPortCurCfgPVID | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The default VLAN ID for the port. | ||||
| CagPortCurCfgGigEthAutoNeg | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthFctl | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to select port flow control for gigabit Ethernet connection.
| ||||
| CagPortCurCfgPortName | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.13 | DisplayString (SIZE (0..63)) | RO | |
column · DisplayString (SIZE (0..63)) · read-only · current The switch port name. | ||||
| CagPortCurCfgLinkTrap | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| CagPortCurCfgGigEthSpeed | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Selects the port speed for Gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthMode | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to select port mode for Gigabit Ethernet connection.
| ||||
| CagPortCurCfgDscpRemarking | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable Dscp remarking for the switch port.
| ||||
| CagPortCurCfgPortAlias | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.24 | DisplayString (SIZE (0..15)) | RO | |
column · DisplayString (SIZE (0..15)) · read-only · current The switch port alias. | ||||
| CagPortCurCfgTagPVID | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current This is PVID tag state of the port
| ||||
| CagPortCurCfgLearning | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable L2 (FDB) Learning for the switch port.
| ||||
| CagPortCurCfgFloodBlocking | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable flood blocking for the switch port.
| ||||
| CagPortCurCfgType | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.29 | DisplayString (SIZE (0..7)) | RO | |
column · DisplayString (SIZE (0..7)) · read-only · current The switch port type. | ||||
| CagPortCurCfgLinkType | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current The type of port connection. (for PVRST only)
| ||||
| CagPortCurCfgEdge | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current The state of port edge.
| ||||
| CagPortCurCfgErrDisableRecovery | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.35 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether the system will automatically re-enable this port if it becomes error-disabled. This port will be re-enabled after the time interval specified by the agCurCfgErrDisableTimeout object has elapsed. A port is in error-disabled state when it is operationally disabled due to abnormal conditions detected on the port. If this port is error-disabled, it will only be re-enabled by the system if the agCurCfgErrDisableRecovery object and this object both have a value of 'enable(1)'.
| ||||
| CagPortCurCfgUdld | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.37 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable UDLD for the switch port.
| ||||
| CagPortCurCfgUdldMode | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.38 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable UDLD mode for the switch port.
| ||||
| CagPortCurCfgOam | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.39 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable OAM Discovery process for the switch port.
| ||||
| CagPortCurCfgOamMode | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.40 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable OAM mode for the switch port.
| ||||
| CagPortCurCfgBpduGuard | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.41 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable BPDU guard for the switch port.
| ||||
| CagPortCurCfgMulticastThreshold | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.42 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Multicast Threshold.
| ||||
| CagPortCurCfgMulticastThresholdRate | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.43 | INTEGER | RO | |
column · INTEGER · read-only · current Current port's Multicast Threshold Rate. | ||||
| CagPortCurCfgBroadcastThreshold | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.44 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Broadcast Threshold.
| ||||
| CagPortCurCfgBroadcastThresholdRate | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.45 | INTEGER | RO | |
column · INTEGER · read-only · current Current port's Broadcast Threshold Rate. | ||||
| CagPortCurCfgDLFThreshold | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.46 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Destination Lookup Fail Threshold.
| ||||
| CagPortCurCfgDLFThresholdRate | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.47 | INTEGER | RO | |
column · INTEGER · read-only · current Current port's Destination Lookup Fail Threshold Rate. | ||||
| CagPortCurCfgMacAddrNotif | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.48 | INTEGER | RO | |
column · INTEGER · read-only · current This is the state of the MAC address notification syslog messages on the port.
| ||||
| CagPortCurCfgTagiPVID | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.49 | INTEGER | RO | |
column · INTEGER · read-only · current This is ingress PVID tag state of the port
| ||||
| CagPortCurCfgStpExtGuard | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.52 | INTEGER | RO | |
column · INTEGER · read-only · current Current state for spanning tree guard type
| ||||
| CagPortCurCfgLFDStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.53 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether the system will put this port in an error-disabled state due to excessive link flaps. A port will be put in an error-disabled state due to excessive link flaps if this object and the global agCurCfgLFDStatus object both have a value of 'enable'. A port has an excessive number of link flaps if the number of link flaps detected during a time period in seconds indicated by agCurCfgLFDTime exceeds the maximum number of allowed flaps indicated by agCurCfgLFDFlaps.
| ||||
| CagPortCurCfgEvbProfId | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.56 | INTEGER (0..16) | RO | |
column · INTEGER (0..16) · read-only · current Current EVB Profile ID | ||||
| CagPortCurCfgReflectRelay | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.59 | INTEGER | RO | |
column · INTEGER · read-only · current Current state of reflective relay
| ||||
| CagPortCurCfgPrivateVlanStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.61 | INTEGER | RO | |
column · INTEGER · read-only · current Current state of Private VLAN on this port
| ||||
| CagPortCurCfgMappedPrimaryVlans | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.62 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented primary VLAN associated to the port
0 - The represented primary VLAN does not associated to the port | ||||
| CagPortCurCfgAssociatedSecondaryVlans | 1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.63 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented secondary VLAN associated to the port
0 - The represented secondary VLAN does not be associated to the port | ||||
| TagPortNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3 | NA | ||
table · not-accessible · current The table of port configuration in the new configuration block. | ||||
| RagPortNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1 | NA | ||
row · not-accessible · current A row in the port configuration table in the new configuration block.
| ||||
| CagPortNewCfgIndx | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in port configurations table. | ||||
| CagPortNewCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This is the state of the port.
| ||||
| CagPortNewCfgVlanTag | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This is VLAN tag state of the port
| ||||
| CagPortNewCfgRmon | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to turn RMON on or off on the port.
| ||||
| CagPortNewCfgPVID | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The default VLAN ID for the port. | ||||
| CagPortNewCfgGigEthAutoNeg | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthFctl | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to select port flow control for gigabit Ethernet connection.
| ||||
| CagPortNewCfgPortName | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.13 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current The switch port name. | ||||
| CagPortNewCfgLinkTrap | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| CagPortNewCfgGigEthSpeed | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current Selects the port speed for Gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthMode | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to select port mode for Gigabit Ethernet connection.
| ||||
| CagPortNewCfgDscpRemarking | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable Dscp remarking for the switch port.
| ||||
| CagPortNewCfgTagPVID | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current This is PVID tag state of the port
| ||||
| CagPortNewCfgLearning | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable L2 (FDB) Learning for the switch port.
| ||||
| CagPortNewCfgFloodBlocking | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable flood blocking for the switch port.
| ||||
| CagPortNewCfgType | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.29 | DisplayString (SIZE (0..7)) | RO | |
column · DisplayString (SIZE (0..7)) · read-only · current The switch port type. | ||||
| CagPortNewCfgLinkType | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.30 | INTEGER | RC | |
column · INTEGER · read-create · current The type of port connection. (for PVRST only)
| ||||
| CagPortNewCfgEdge | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.31 | INTEGER | RC | |
column · INTEGER · read-create · current The state of port edge.
| ||||
| CagPortNewCfgErrDisableRecovery | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.35 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies whether the system should automatically re-enable this port when it becomes error-disabled. Use this object to change the port-level setting of the error-disable recovery action.
| ||||
| CagPortNewCfgUdld | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.37 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable UDLD for the switch port.
| ||||
| CagPortNewCfgUdldMode | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.38 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable UDLD mode for the switch port.
| ||||
| CagPortNewCfgOam | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.39 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable OAM Discovery process for the switch port.
| ||||
| CagPortNewCfgOamMode | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.40 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable OAM mode for the switch port.
| ||||
| CagPortNewCfgBpduGuard | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable BPDU guard for the switch port.
| ||||
| CagPortNewCfgMulticastThreshold | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.42 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Multicast Threshold.
| ||||
| CagPortNewCfgMulticastThresholdRate | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.43 | INTEGER | RW | |
column · INTEGER · read-write · current New port's Multicast Threshold Rate. | ||||
| CagPortNewCfgBroadcastThreshold | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.44 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Broadcast Threshold.
| ||||
| CagPortNewCfgBroadcastThresholdRate | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.45 | INTEGER | RW | |
column · INTEGER · read-write · current New port's Broadcast Threshold Rate. | ||||
| CagPortNewCfgDLFThreshold | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.46 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Destination Lookup Fail Threshold.
| ||||
| CagPortNewCfgDLFThresholdRate | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.47 | INTEGER | RW | |
column · INTEGER · read-write · current New port's Destination Lookup Fail Threshold Rate. | ||||
| CagPortNewCfgMacAddrNotif | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.48 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or Disables the MAC address notification syslog messages on the port.
| ||||
| CagPortNewCfgTagiPVID | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.49 | INTEGER | RW | |
column · INTEGER · read-write · current This is ingress PVID tag state of the port
| ||||
| CagPortNewCfgStpExtGuard | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.52 | INTEGER | RW | |
column · INTEGER · read-write · current Set spanning tree guard type
| ||||
| CagPortNewCfgLFDStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.53 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates whether the system should put this port in an error-disabled state due to excessive link flaps. Use this object to change the port setting of the Link Flap Dampening error-disable action.
| ||||
| CagPortNewCfgEvbProfId | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.56 | INTEGER (0..16) | RW | |
column · INTEGER (0..16) · read-write · current Set EVB Profile ID | ||||
| CagPortNewCfgReflectRelay | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.59 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable reflective relay for port
| ||||
| CagPortNewCfgPrivateVlanStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.61 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the Private VLAN on this port
| ||||
| CagPortNewCfgMappedPrimaryVlans | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.62 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented primary VLAN associate to the port
0 - The represented primary VLAN does not associate to the port | ||||
| CagPortNewCfgAddPrimaryVlan | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.63 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Adds the port to the specified primary VLAN. A '0' value is returned when read. | ||||
| CagPortNewCfgDelPrimaryVlan | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.64 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Removes the port from the specified primary VLAN. A '0' value is returned when read. | ||||
| CagPortNewCfgAssociatedSecondaryVlans | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.65 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented secondary VLAN associated to the port
0 - The represented secondary VLAN does not be associated to the port | ||||
| CagPortNewCfgAddSecondaryVlan | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.66 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Adds the port to the specified secondary VLAN. A '0' value is returned when read. | ||||
| CagPortNewCfgDelSecondaryVlan | 1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.67 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Removes the port from the secondary VLAN. A '0' value is returned when read. | ||||
| NagRadiusConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.3 | |||
| SradCurCfgPrimaryServer | 1.3.6.1.4.1.20301.2.7.15.1.1.3.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Primary RADIUS server. | ||||
| SradNewCfgPrimaryServer | 1.3.6.1.4.1.20301.2.7.15.1.1.3.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Primary RADIUS server. | ||||
| SradCurCfgSecondaryServer | 1.3.6.1.4.1.20301.2.7.15.1.1.3.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Secondary RADIUS server. | ||||
| SradNewCfgSecondaryServer | 1.3.6.1.4.1.20301.2.7.15.1.1.3.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Secondary RADIUS server. | ||||
| SradCurCfgPort | 1.3.6.1.4.1.20301.2.7.15.1.1.3.5 | INTEGER (1500..3000) | RO | |
scalar · INTEGER (1500..3000) · read-only · current Specify the RADIUS port number. | ||||
| SradNewCfgPort | 1.3.6.1.4.1.20301.2.7.15.1.1.3.6 | INTEGER (1500..3000) | RW | |
scalar · INTEGER (1500..3000) · read-write · current Specify the RADIUS port number. | ||||
| SradCurCfgTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.3.7 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current The maximum number of seconds before resending authentication to RADIUS server. | ||||
| SradNewCfgTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.3.8 | INTEGER (1..10) | RW | |
scalar · INTEGER (1..10) · read-write · current The maximum number of seconds before resending authentication to RADIUS server. | ||||
| SradCurCfgRetries | 1.3.6.1.4.1.20301.2.7.15.1.1.3.9 | INTEGER (1..3) | RO | |
scalar · INTEGER (1..3) · read-only · current Number of retries to the RADIUS server. | ||||
| SradNewCfgRetries | 1.3.6.1.4.1.20301.2.7.15.1.1.3.10 | INTEGER (1..3) | RW | |
scalar · INTEGER (1..3) · read-write · current Number of retries to the RADIUS server. | ||||
| SradCurCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.3.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable RADIUS authentication.
| ||||
| SradNewCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.3.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS authentication.
| ||||
| SradCurCfgAuthenString | 1.3.6.1.4.1.20301.2.7.15.1.1.3.13 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The RADIUS authentication string. | ||||
| SradNewCfgAuthenString | 1.3.6.1.4.1.20301.2.7.15.1.1.3.14 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The RADIUS authentication string. | ||||
| SradCurCfgBackdoor | 1.3.6.1.4.1.20301.2.7.15.1.1.3.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable RADIUS backdoor for telnet/ssh/http/https.
| ||||
| SradNewCfgBackdoor | 1.3.6.1.4.1.20301.2.7.15.1.1.3.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS backdoor for telnet/ssh/http/https.
| ||||
| SradCurCfgAuthenSecondString | 1.3.6.1.4.1.20301.2.7.15.1.1.3.17 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The second RADIUS authentication string. | ||||
| SradNewCfgAuthenSecondString | 1.3.6.1.4.1.20301.2.7.15.1.1.3.18 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The second RADIUS authentication string. | ||||
| SradCurCfgSecBd | 1.3.6.1.4.1.20301.2.7.15.1.1.3.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable RADIUS secure backdoor for telnet.
| ||||
| SradNewCfgSecBd | 1.3.6.1.4.1.20301.2.7.15.1.1.3.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS secure backdoor for telnet.
| ||||
| SradCurCfgPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.3.21 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify whether the Radius should be performed over the data port or the management port.
| ||||
| SradNewCfgPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.3.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether the Radius should be performed over the data port or the management port.
| ||||
| SradCurCfgSecPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.3.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify whether the Radius should be performed over the data port or the management port.
| ||||
| SradNewCfgSecPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.3.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether the Radius should be performed over the data port or the management port.
| ||||
| SradCurCfgSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.3.25 | INTEGER | RO | |
scalar · INTEGER · read-only · current The index of the loopback interface that should be used for the source IP of the Radius message; 0 means that no loopback interface is used as the source of the Radius message. | ||||
| SradNewCfgSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.3.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current The index of the loopback interface that should be used for the source IP of the Radius message; 0 means that no loopback interface is used as the source of the Radius message. | ||||
| NagNTP | 1.3.6.1.4.1.20301.2.7.15.1.1.4 | |||
| SagCurCfgNTPServer | 1.3.6.1.4.1.20301.2.7.15.1.1.4.1 | DisplayString (SIZE (0..46)) | RO | |
scalar · DisplayString (SIZE (0..46)) · read-only · current The NTP Server Address. | ||||
| SagNewCfgNTPServer | 1.3.6.1.4.1.20301.2.7.15.1.1.4.2 | DisplayString (SIZE (0..46)) | RW | |
scalar · DisplayString (SIZE (0..46)) · read-write · current The NTP Server Address. | ||||
| SagCurCfgNTPResyncInterval | 1.3.6.1.4.1.20301.2.7.15.1.1.4.3 | INTEGER (5..44640) | RO | |
scalar · INTEGER (5..44640) · read-only · current The NTP Server resync interval in minutes. | ||||
| SagNewCfgNTPResyncInterval | 1.3.6.1.4.1.20301.2.7.15.1.1.4.4 | INTEGER (5..44640) | RW | |
scalar · INTEGER (5..44640) · read-write · current The NTP Server resync interval in minutes. | ||||
| SagCurCfgNTPService | 1.3.6.1.4.1.20301.2.7.15.1.1.4.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable NTP Service.
| ||||
| SagNewCfgNTPService | 1.3.6.1.4.1.20301.2.7.15.1.1.4.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable NTP Service.
| ||||
| SagCurCfgNTPSecServer | 1.3.6.1.4.1.20301.2.7.15.1.1.4.11 | DisplayString (SIZE (0..46)) | RO | |
scalar · DisplayString (SIZE (0..46)) · read-only · current The Secondary NTP Server Address. | ||||
| SagNewCfgNTPSecServer | 1.3.6.1.4.1.20301.2.7.15.1.1.4.12 | DisplayString (SIZE (0..46)) | RW | |
scalar · DisplayString (SIZE (0..46)) · read-write · current The Secondary NTP Server Address. | ||||
| SagCurCfgNTPServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.4.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current Choose the port that the primary server is connected to.
| ||||
| SagNewCfgNTPServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.4.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Choose the port that the primary server is connected to.
| ||||
| SagCurCfgNTPSecServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.4.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Choose the port that the secondary server is connected to.
| ||||
| SagNewCfgNTPSecServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.4.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Choose the port that the secondary server is connected to.
| ||||
| SagCurCfgNTPSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.4.17 | INTEGER | RO | |
scalar · INTEGER · read-only · current The index of the loopback interface that should be used for the source IP of the NTP packet; 0 means that no loopback interface is used as the source of the NTP packet. | ||||
| SagNewCfgNTPSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.4.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current The index of the loopback interface that should be used for the source IP of the NTP packet; 0 means that no loopback interface is used as the source of the NTP packet. | ||||
| NagSyslog | 1.3.6.1.4.1.20301.2.7.15.1.1.5 | |||
| SagCurCfgSyslogHost | 1.3.6.1.4.1.20301.2.7.15.1.1.5.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current The syslog host IP address in the current configuration block. | ||||
| SagNewCfgSyslogHost | 1.3.6.1.4.1.20301.2.7.15.1.1.5.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current The syslog host IP address in the new configuration block. | ||||
| SagCurCfgSyslog2Host | 1.3.6.1.4.1.20301.2.7.15.1.1.5.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The second syslog host IP address in the current configuration block. | ||||
| SagNewCfgSyslog2Host | 1.3.6.1.4.1.20301.2.7.15.1.1.5.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current The second syslog host IP address in the new configuration block. | ||||
| SagCurCfgSyslogFac | 1.3.6.1.4.1.20301.2.7.15.1.1.5.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The facility level of syslog host in the current configuration block.
| ||||
| SagNewCfgSyslogFac | 1.3.6.1.4.1.20301.2.7.15.1.1.5.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The facility level of syslog host in the new configuration block.
| ||||
| SagCurCfgSyslog2Fac | 1.3.6.1.4.1.20301.2.7.15.1.1.5.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The facility level of second syslog host in the current configuration block.
| ||||
| SagNewCfgSyslog2Fac | 1.3.6.1.4.1.20301.2.7.15.1.1.5.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The facility level of second syslog host in the new configuration block.
| ||||
| SagClrSyslogMsgs | 1.3.6.1.4.1.20301.2.7.15.1.1.5.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clears all current Syslog messages.
| ||||
| SagSyslogMsgTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.1.1.5.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the syslog message table. | ||||
| TagSyslogMsgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.5.11 | NA | ||
table · not-accessible · current The table of syslog messages. | ||||
| RagSyslogMsgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.5.11.1 | NA | ||
| CagSyslogMsgIndex | 1.3.6.1.4.1.20301.2.7.15.1.1.5.11.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The syslog message table index. | ||||
| CagSyslogMessage | 1.3.6.1.4.1.20301.2.7.15.1.1.5.11.1.2 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The syslog message. | ||||
| NagLog | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12 | |||
| SagNewCfgSyslogTrapConsole | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable console syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapConsole | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable console syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapSystem | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable system level syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapSystem | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable system level syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapMgmt | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable management(flash, config, login) syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapMgmt | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable management(flash, config, login) syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapCli | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable CLI generated error syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapCli | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable CLI generated error syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapStg | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable spanning tree syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapStg | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable spanning tree syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapVlan | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VLAN syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapVlan | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable VLAN syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapSsh | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable SSH, RADIUS syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapSsh | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.20 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable SSH, RADIUS syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapVrrp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VRRP syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapVrrp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.22 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable VRRP syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapBgp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable BGP syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapBgp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.24 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable BGP syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapNtp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable NTP syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapNtp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.26 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable NTP syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapIp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.31 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable IP related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapIp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.32 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable IP related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapWeb | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.35 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable WEBUI related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapWeb | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.36 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable WEBUI related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapOspf | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.41 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable OSPF related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapOspf | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.42 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable OSPF related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapRmon | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.45 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RMON related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapRmon | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.46 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable RMON related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrap8021x | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.49 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable 802.1x related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrap8021x | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.50 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable 802.1x related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapCfg | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.53 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable CFG related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapCfg | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.54 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable CFG related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapServer | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.55 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable Server related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapServer | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.56 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable Server related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapDifftrak | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.57 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable Difftrak related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapDifftrak | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.58 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable Difftrak related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapHotlinks | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.61 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable Hot Links related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapHotlinks | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.62 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable Hot Links related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapLldp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.63 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable LLDP related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapLldp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.64 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable LLDP related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapAll | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.65 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all syslog and SNMP traps in the new configuration block.
| ||||
| SagCurCfgSyslogTrapAll | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.66 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all syslog and SNMP traps, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapIpv6 | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.67 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable IPv6 related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapIpv6 | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.68 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable IPv6 related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapFailover | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.73 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable failover related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapFailover | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.74 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable failover related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapLacp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.77 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable LACP syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapLacp | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.78 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable LACP syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapLink | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.79 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all syslog and SNMP traps, in link up/down.
| ||||
| SagCurCfgSyslogTrapLink | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.80 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all syslog and SNMP traps, as currently configured in link up/down.
| ||||
| SagNewCfgSyslogTrapOspfv3 | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.81 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable OSPFv3 related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapOspfv3 | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.82 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable OSPFv3 related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapDcbx | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.85 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all DCBX-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogTrapDcbx | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.86 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all DCBX-related syslog and SNMP traps.
| ||||
| SagNewCfgSyslogTrapFcoe | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.87 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all FCOE-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogTrapFcoe | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.88 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all FCOE-related syslog and SNMP traps.
| ||||
| SagNewCfgSyslogTrapVm | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.89 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all VM-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogTrapVm | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.90 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all VM-related syslog and SNMP traps.
| ||||
| SagNewCfgSyslogTrapVnic | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.91 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all VNIC-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogTrapVnic | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.92 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all VNIC-related syslog and SNMP traps.
| ||||
| SagNewCfgSyslogTrapCfgchg | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.93 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable configuration change related syslog and SNMP trap in the new configuration block.
| ||||
| SagCurCfgSyslogTrapCfgchg | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.94 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable configuration change related syslog and SNMP trap, as configured in the current configuration block.
| ||||
| SagNewCfgSyslogTrapVlag | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.95 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable Vlag related syslog and SNMP trap.
| ||||
| SagCurCfgSyslogTrapVlag | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.96 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable Vlag related syslog and SNMP trap.
| ||||
| SagNewCfgSyslogTrapIgmpGroup | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.99 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all IGMP GROUP-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogTrapIgmpGroup | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.100 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all IGMP GROUP-related syslog and SNMP traps.
| ||||
| SagNewCfgSyslogTrapIgmpMrouter | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.101 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all IGMP MROUTER-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogTrapIgmpMrouter | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.102 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all IGMP MROUTER-related syslog and SNMP traps.
| ||||
| SagNewCfgSyslogTrapIgmpQuerier | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.103 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all IGMP QUERIER-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogTrapIgmpQuerier | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.104 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all IGMP QUERIER-related syslog and SNMP traps.
| ||||
| SagNewCfgSyslogTrapMld | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.105 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all MLD-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogTrapMld | 1.3.6.1.4.1.20301.2.7.15.1.1.5.12.106 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all MLD-related syslog and SNMP traps.
| ||||
| SagCurCfgSyslogSev | 1.3.6.1.4.1.20301.2.7.15.1.1.5.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current The severity of syslog host in the current configuration block.
| ||||
| SagNewCfgSyslogSev | 1.3.6.1.4.1.20301.2.7.15.1.1.5.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current The severity of syslog host in the new configuration block.
| ||||
| SagCurCfgSyslog2Sev | 1.3.6.1.4.1.20301.2.7.15.1.1.5.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current The severity of syslog2 host in the current configuration block.
| ||||
| SagNewCfgSyslog2Sev | 1.3.6.1.4.1.20301.2.7.15.1.1.5.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current The severity of syslogs host in the new configuration block.
| ||||
| SagCurCfgSyslogHostPort | 1.3.6.1.4.1.20301.2.7.15.1.1.5.17 | INTEGER | RO | |
scalar · INTEGER · read-only · current Choose the port that the primary Syslog server is connected to.
| ||||
| SagNewCfgSyslogHostPort | 1.3.6.1.4.1.20301.2.7.15.1.1.5.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current Choose the port that the primary Syslog server is connected to.
| ||||
| SagCurCfgSyslog2HostPort | 1.3.6.1.4.1.20301.2.7.15.1.1.5.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current Choose the port that the secondary Syslog server is connected to.
| ||||
| SagNewCfgSyslog2HostPort | 1.3.6.1.4.1.20301.2.7.15.1.1.5.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Choose the port that the secondary Syslog server is connected to.
| ||||
| SagCurCfgSyslogSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.5.21 | INTEGER | RO | |
scalar · INTEGER · read-only · current The index of the loopback interface that should be used for the source IP of the syslog message; 0 means that no loopback interface is used as the source of the syslog message. | ||||
| SagNewCfgSyslogSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.5.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current The index of the loopback interface that should be used for the source IP of the syslog message; 0 means that no loopback interface is used as the source of the syslog message. | ||||
| SagCurCfgSyslogConsoleSev | 1.3.6.1.4.1.20301.2.7.15.1.1.5.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current The severity of syslogs console in the current configuration block.
| ||||
| SagNewCfgSyslogConsoleSev | 1.3.6.1.4.1.20301.2.7.15.1.1.5.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current The severity of syslogs console in the new configuration block.
| ||||
| SagCurCfgSyslogFlashSev | 1.3.6.1.4.1.20301.2.7.15.1.1.5.25 | INTEGER | RO | |
scalar · INTEGER · read-only · current The severity of syslogs flash in the current configuration block.
| ||||
| SagNewCfgSyslogFlashSev | 1.3.6.1.4.1.20301.2.7.15.1.1.5.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current The severity of syslogs flash in the new configuration block.
| ||||
| NagTransfer | 1.3.6.1.4.1.20301.2.7.15.1.1.7 | |||
| SagTransferServer | 1.3.6.1.4.1.20301.2.7.15.1.1.7.1 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The FTP/TFTP server IP address or domain name. | ||||
| SagTransferImage | 1.3.6.1.4.1.20301.2.7.15.1.1.7.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether the image file should be loaded in image1 or image2 in flash.
| ||||
| SagTransferImageFileName | 1.3.6.1.4.1.20301.2.7.15.1.1.7.3 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The image file name to be transferred. | ||||
| SagTransferCfgFileName | 1.3.6.1.4.1.20301.2.7.15.1.1.7.4 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The configuration file name. | ||||
| SagTransferDumpFileName | 1.3.6.1.4.1.20301.2.7.15.1.1.7.5 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The core dump file name. | ||||
| SagTransferAction | 1.3.6.1.4.1.20301.2.7.15.1.1.7.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to perform various FTP/TFTP Get or Put functions.
The FTP/TFTP sever is specified in agTransferServer object.
img-get(2) - Download switch image from a specified image
file(agTransferImageFileName) on the FTP/TFTP server to
the destinated storage(agTransferImage).
The duration of the action will depend on the image
downloading and writting time on the network element.
Sugguest 150 seconds timeout setting in MIB Browser to get
the correct response for this action.
cfg-get(3) - Download switch configuration from a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
dump-put(5) - Download switch core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
bkpdump-put(6)- Download switch backup core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
img-put(7) - Upload specified switch image to a specified image
file(agTransferImageFileName) on the FTP/TFTP server.
tsdump-put(8) - Download switch tech support dump to a specified
file(agTransferTSDumpFileName) on the FTP/TFTP server.
bogon-get(9) - Download bogon config file from a specified bogon
file(uses agTransferImageFileName) on the FTP/TFTP server.
ca-get(14) - Download CA root certificate from a specified
file(agTransferCaFileName) on the TFTP server.
This command did not support FTP.
hostcert-get(15) - Download host certificate from a specified
file(agTransferHostCertFileName) on the TFTP server.
This command did not support FTP.
hostkey-get(16) - Download host private key from a specified
file(agTransferHostKeyFileName) on the TFTP server.
This command did not support FTP.
other(1) is returned always when read.
| ||||
| SagTransferLastActionStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.7.7 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The recorded status of the previous FTP/TFTP activity. | ||||
| SagTransferPort | 1.3.6.1.4.1.20301.2.7.15.1.1.7.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether the FTP/TFTP operation should be performed over the data port or the management port.
| ||||
| SagTransferUserName | 1.3.6.1.4.1.20301.2.7.15.1.1.7.9 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The username for the FTP server or blank for TFTP server. | ||||
| SagTransferPassword | 1.3.6.1.4.1.20301.2.7.15.1.1.7.10 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The password for the FTP server. For security reason, an empty string will be returned when the OID is read. | ||||
| SagTransferTSDumpFileName | 1.3.6.1.4.1.20301.2.7.15.1.1.7.11 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The TS dump file name. | ||||
| SagTransferLastConfigurationActionStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.7.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current The status of the last configuration action using the file ftp/tftp'd from server.
| ||||
| SagTransferCaFileName | 1.3.6.1.4.1.20301.2.7.15.1.1.7.15 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The CA certificate file name. | ||||
| SagTransferHostCertFileName | 1.3.6.1.4.1.20301.2.7.15.1.1.7.16 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The Host certificate file name. | ||||
| SagTransferHostKeyFileName | 1.3.6.1.4.1.20301.2.7.15.1.1.7.17 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The Host private key file name. | ||||
| SagTransferProtocol | 1.3.6.1.4.1.20301.2.7.15.1.1.7.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current The protocol used by this transfer.
| ||||
| SagServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.7.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port is listened on the server.
| ||||
| SagSIFabricMode | 1.3.6.1.4.1.20301.2.7.15.1.1.7.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set mode to SI Fabric image.
| ||||
| NagApply | 1.3.6.1.4.1.20301.2.7.15.1.1.8 | |||
| SagApplyPending | 1.3.6.1.4.1.20301.2.7.15.1.1.8.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.
| ||||
| SagApplyConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.8.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned.
idle(2) indicates that there is no apply in progess.
complete(4) indicates that the last apply operation is completed.
Setting the value to apply(1), will write all the changes made
since the last apply to the current configuration block.
If the apply is successful this variable will return the state
'complete' else it will return 'failed'. In case of failure,
to read the reason for failure use the agApplyTable.
Once the operation is completed or the agApplyTable is read in case
of failure, the apply buffer needs to be freed and the agApplyState
should be set back to 'idle' state so others can issue the apply
command via SNMP.
| ||||
| SagApplyTableSize | 1.3.6.1.4.1.20301.2.7.15.1.1.8.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the apply table. | ||||
| TagApplyTable | 1.3.6.1.4.1.20301.2.7.15.1.1.8.5 | NA | ||
table · not-accessible · current The table of failure reasons for an apply of current configuration block changes. | ||||
| RagApplyTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.8.5.1 | NA | ||
row · not-accessible · current A row in the table of failure reasons for an apply (information about a particular reason of failure).
| ||||
| CagApplyIndex | 1.3.6.1.4.1.20301.2.7.15.1.1.8.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagApplyString | 1.3.6.1.4.1.20301.2.7.15.1.1.8.5.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the apply table. | ||||
| NagTacacsConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.11 | |||
| StacCurCfgPrimaryServer | 1.3.6.1.4.1.20301.2.7.15.1.1.11.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Primary TACACS+ server. | ||||
| StacNewCfgPrimaryServer | 1.3.6.1.4.1.20301.2.7.15.1.1.11.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Primary TACACS+ server. | ||||
| StacCurCfgSecondaryServer | 1.3.6.1.4.1.20301.2.7.15.1.1.11.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Secondary TACACS+ server. | ||||
| StacNewCfgSecondaryServer | 1.3.6.1.4.1.20301.2.7.15.1.1.11.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Secondary TACACS+ server. | ||||
| StacCurCfgPort | 1.3.6.1.4.1.20301.2.7.15.1.1.11.5 | INTEGER (1..65000) | RO | |
scalar · INTEGER (1..65000) · read-only · current Specify the TACACS+ port number. | ||||
| StacNewCfgPort | 1.3.6.1.4.1.20301.2.7.15.1.1.11.6 | INTEGER (1..65000) | RW | |
scalar · INTEGER (1..65000) · read-write · current Specify the TACACS+ port number. | ||||
| StacCurCfgTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.11.7 | INTEGER (4..15) | RO | |
scalar · INTEGER (4..15) · read-only · current The maximum number of seconds before resending authentication to TACACS+ server. | ||||
| StacNewCfgTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.11.8 | INTEGER (4..15) | RW | |
scalar · INTEGER (4..15) · read-write · current The maximum number of seconds before resending authentication to TACACS+ server. | ||||
| StacCurCfgRetries | 1.3.6.1.4.1.20301.2.7.15.1.1.11.9 | INTEGER (1..3) | RO | |
scalar · INTEGER (1..3) · read-only · current Number of retries to the TACACS+ server. | ||||
| StacNewCfgRetries | 1.3.6.1.4.1.20301.2.7.15.1.1.11.10 | INTEGER (1..3) | RW | |
scalar · INTEGER (1..3) · read-write · current Number of retries to the TACACS+ server. | ||||
| StacCurCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.11.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ authentication.
| ||||
| StacNewCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.11.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ authentication.
| ||||
| StacCurCfgAuthenString | 1.3.6.1.4.1.20301.2.7.15.1.1.11.13 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The TACACS+ authentication string. | ||||
| StacNewCfgAuthenString | 1.3.6.1.4.1.20301.2.7.15.1.1.11.14 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The TACACS+ authentication string. | ||||
| StacCurCfgBackdoor | 1.3.6.1.4.1.20301.2.7.15.1.1.11.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ backdoor for telnet/ssh/http/https.
| ||||
| StacNewCfgBackdoor | 1.3.6.1.4.1.20301.2.7.15.1.1.11.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ backdoor for telnet/ssh/http/https.
| ||||
| StacCurCfgAuthenSecondString | 1.3.6.1.4.1.20301.2.7.15.1.1.11.17 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The second TACACS+ authentication string. | ||||
| StacNewCfgAuthenSecondString | 1.3.6.1.4.1.20301.2.7.15.1.1.11.18 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The second TACACS+ authentication string. | ||||
| StacCurCfgCmdAuthor | 1.3.6.1.4.1.20301.2.7.15.1.1.11.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ command authorization.
| ||||
| StacNewCfgCmdAuthor | 1.3.6.1.4.1.20301.2.7.15.1.1.11.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ command authorization.
| ||||
| StacCurCfgCmdLogging | 1.3.6.1.4.1.20301.2.7.15.1.1.11.21 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ command logging.
| ||||
| StacNewCfgCmdLogging | 1.3.6.1.4.1.20301.2.7.15.1.1.11.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ command logging.
| ||||
| StacCurCfgSecBd | 1.3.6.1.4.1.20301.2.7.15.1.1.11.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ secure backdoor for telnet.
| ||||
| StacNewCfgSecBd | 1.3.6.1.4.1.20301.2.7.15.1.1.11.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ secure backdoor for telnet.
| ||||
| StacCurCfgCmap | 1.3.6.1.4.1.20301.2.7.15.1.1.11.25 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable Tacacs+ new privilege level mapping, as configured in the current configuration block.
| ||||
| StacNewCfgCmap | 1.3.6.1.4.1.20301.2.7.15.1.1.11.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable Tacacs+ new privilege level mapping.
| ||||
| StacCurCfgEnaPassChange | 1.3.6.1.4.1.20301.2.7.15.1.1.11.29 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable Tacacs+ password change.
| ||||
| StacNewCfgEnaPassChange | 1.3.6.1.4.1.20301.2.7.15.1.1.11.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable Tacacs+ password change.
| ||||
| StacChangePassForUser | 1.3.6.1.4.1.20301.2.7.15.1.1.11.31 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The username for changing server password. | ||||
| StacChangePassCurPass | 1.3.6.1.4.1.20301.2.7.15.1.1.11.32 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The current password for tacacs server. | ||||
| StacChangePassNewPass | 1.3.6.1.4.1.20301.2.7.15.1.1.11.33 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The new password for tacacs server. | ||||
| StacChangePassForServer | 1.3.6.1.4.1.20301.2.7.15.1.1.11.34 | INTEGER | RW | |
scalar · INTEGER · read-write · current Change password for <1/2> Tacacs+ server.
| ||||
| StacCurCfgPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.11.35 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify whether the Tacacs should be performed over the data port or the management port.
| ||||
| StacNewCfgPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.11.36 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether the Tacacs should be performed over the data port or the management port.
| ||||
| StacCurCfgSecPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.11.37 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify whether the Tacacs should be performed over the data port or the management port.
| ||||
| StacNewCfgSecPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.11.38 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether the Tacacs should be performed over the data port or the management port.
| ||||
| TagTacacsUserMapCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.11.39 | NA | ||
table · not-accessible · current The table of tacacs+ user map current configuration. | ||||
| RagTacacsUserMapCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.11.39.1 | NA | ||
| CagTacacsUserMapCurCfgUId | 1.3.6.1.4.1.20301.2.7.15.1.1.11.39.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The current config remote privilege identifier. The identifier value corresponds to the remote privilege. | ||||
| CagTacacsUserMapCurCfgMapping | 1.3.6.1.4.1.20301.2.7.15.1.1.11.39.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Current Tacacs+ user privilege mappings. The correspondence between the local privilege and the remote privilege is: - The remote privilege is the privilege identifier value - The local privilege is the mapped value(user, oper, admin) Example: For the remote privilege 15, we have the index 16: agTacacsUserMapCurCfgUId.16 = 15.
| ||||
| TagTacacsUserMapNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.11.40 | NA | ||
table · not-accessible · current The table of tacacs+ user map new configuration. | ||||
| RagTacacsUserMapNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.11.40.1 | NA | ||
| CagTacacsUserMapNewCfgUId | 1.3.6.1.4.1.20301.2.7.15.1.1.11.40.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The new config remote privilege identifier. The identifier value corresponds to the remote privilege. | ||||
| CagTacacsUserMapNewCfgMapping | 1.3.6.1.4.1.20301.2.7.15.1.1.11.40.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Set new Tacacs+ user privilege mappings. The correspondence between the local privilege and the remote privilege is: - The remote privilege is the privilege identifier value - The local privilege is the mapped value(user, oper, admin) Example: For the remote privilege 15, we have the index 16: agTacacsUserMapNewCfgUId.16 = 15.
| ||||
| StacNewCfgDirectedRequest | 1.3.6.1.4.1.20301.2.7.15.1.1.11.41 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable tacacs directed request.
| ||||
| StacCurCfgDirectedRequest | 1.3.6.1.4.1.20301.2.7.15.1.1.11.42 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current tacacs directed request state.
| ||||
| StacCurCfgAttempts | 1.3.6.1.4.1.20301.2.7.15.1.1.11.43 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current Number of login attempts to the TACACS+ server. | ||||
| StacNewCfgAttempts | 1.3.6.1.4.1.20301.2.7.15.1.1.11.44 | INTEGER (1..10) | RW | |
scalar · INTEGER (1..10) · read-write · current Number of login attempts to the TACACS+ server. | ||||
| StacCurBypassEnable | 1.3.6.1.4.1.20301.2.7.15.1.1.11.45 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of the enable bypass.If the status of this object is enabled, user authenticated via TACACS+ with admin previllage is granted enable previllage access.If disabled, admin users will be provided with enable previllage access based on enable password configured.
| ||||
| StacNewBypassEnable | 1.3.6.1.4.1.20301.2.7.15.1.1.11.46 | INTEGER | RW | |
scalar · INTEGER · read-write · current Status of the enable bypass.If the status of this object is enabled, user authenticated via TACACS+ with admin previllage is granted enable previllage access.If disabled, admin users will be provided with enable previllage access based on enable password configured.
| ||||
| StacCurCfgEnableAccounting | 1.3.6.1.4.1.20301.2.7.15.1.1.11.47 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current TACACS+ accounting state.
| ||||
| StacNewCfgEnableAccounting | 1.3.6.1.4.1.20301.2.7.15.1.1.11.48 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable TACACS+ accounting.
| ||||
| StacCurCfgSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.11.49 | INTEGER | RO | |
scalar · INTEGER · read-only · current The index of the loopback interface that should be used for the source IP of the Tacacs+ message; 0 means that no loopback interface is used as the source of the Tacacs+ message. | ||||
| StacNewCfgSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.1.1.11.50 | INTEGER | RW | |
scalar · INTEGER · read-write · current The index of the loopback interface that should be used for the source IP of the Tacacs+ message; 0 means that no loopback interface is used as the source of the Tacacs+ message. | ||||
| NagMgmtNetConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.12 | |||
| SagMgmtNetTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.1.1.12.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in the Management Network Table. | ||||
| TagCurCfgMgmtNetTable | 1.3.6.1.4.1.20301.2.7.15.1.1.12.2 | NA | ||
table · not-accessible · current The table for Management Network definitions in the current configuration block. | ||||
| RagCurCfgMgmtNetEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.12.2.1 | NA | ||
row · not-accessible · current A row in the management network definition table.
| ||||
| CagCurCfgMgmtNetIndex | 1.3.6.1.4.1.20301.2.7.15.1.1.12.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Management Network Definition table. | ||||
| CagCurCfgMgmtNetSubnet | 1.3.6.1.4.1.20301.2.7.15.1.1.12.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The Management Network Address in the current configuration block. | ||||
| CagCurCfgMgmtNetMask | 1.3.6.1.4.1.20301.2.7.15.1.1.12.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The Management Network Mask/Prefix Length in the current configuration block. | ||||
| TagNewCfgMgmtNetTable | 1.3.6.1.4.1.20301.2.7.15.1.1.12.3 | NA | ||
table · not-accessible · current The table for Management Network definitions in the new configuration block. | ||||
| RagNewCfgMgmtNetEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1 | NA | ||
row · not-accessible · current A row in the management network definition table.
| ||||
| CagNewCfgMgmtNetIndex | 1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Management Network Definition table. | ||||
| CagNewCfgMgmtNetSubnet | 1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current The Management Network Address in the new configuration block. | ||||
| CagNewCfgMgmtNetMask | 1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current The Management Network Mask/Prefix length in the new configuration block. | ||||
| CagNewCfgMgmtNetDelete | 1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current By setting the value to delete(2), the entire row is deleted.
| ||||
| SagMgmtNetClear | 1.3.6.1.4.1.20301.2.7.15.1.1.12.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current By setting the value to delete(2), the entire table is cleared.
| ||||
| NagBoot | 1.3.6.1.4.1.20301.2.7.15.1.1.13 | |||
| SagCfgBootResetParameters | 1.3.6.1.4.1.20301.2.7.15.1.1.13.1 | DisplayString (SIZE (0..255)) | RW | |
scalar · DisplayString (SIZE (0..255)) · read-write · current String formatated as 'weekday hour minute' where - weekday is none(0),sunday(1),monday(2), tuesday(3),wednesday(4),thursday(5),friday(6), saturday(7) - hour is the hour in 24-hour format for reboot - minutes are the minutes [00] for reboot | ||||
| SagCfgBootReset | 1.3.6.1.4.1.20301.2.7.15.1.1.13.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Cancel pending switch reset.
| ||||
| SagCfgBootNxtResetTime | 1.3.6.1.4.1.20301.2.7.15.1.1.13.5 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Display the next scheduled reboot time. | ||||
| SagCfgBootPendingReset | 1.3.6.1.4.1.20301.2.7.15.1.1.13.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Shows if there is any pending reboot scheduled. You should cancel any pending reboot scheduled before setting another.
| ||||
| NagAccess | 1.3.6.1.4.1.20301.2.7.15.1.1.19 | |||
| SagAccessUserMaxUserID | 1.3.6.1.4.1.20301.2.7.15.1.1.19.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of User IDs. | ||||
| TagAccessUserCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.19.2 | NA | ||
table · not-accessible · current The table of Access user configuration. | ||||
| RagAccessUserCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1 | NA | ||
row · not-accessible · current A row in the Access user configuration table. | ||||
| CagAccessUserCurCfgUId | 1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The User identifier. | ||||
| CagAccessUserCurCos | 1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The user class of service.
| ||||
| CagAccessUserCurCfgName | 1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.3 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The user name. Please note, the max length is 8 in stacking mode. | ||||
| CagAccessUserCurCfgPswd | 1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.4 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The character string representing the user password. | ||||
| CagAccessUserCurCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current User validation (enabled or disabled) in current configuration block.
| ||||
| TagAccessUserNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.19.3 | NA | ||
table · not-accessible · current The table of Access user configuration. | ||||
| RagAccessUserNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1 | NA | ||
row · not-accessible · current A row in the Access user configuration table. | ||||
| CagAccessUserNewCfgUId | 1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The User identifier. | ||||
| CagAccessUserNewCos | 1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The user class of service.
| ||||
| CagAccessUserNewCfgName | 1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.3 | DisplayString (SIZE (0..64)) | RC | |
column · DisplayString (SIZE (0..64)) · read-create · current The user name. Please note, the max length is 8 in stacking mode. | ||||
| CagAccessUserNewCfgPswd | 1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.4 | DisplayString (SIZE (0..128)) | RC | |
column · DisplayString (SIZE (0..128)) · read-create · current The character string representing the user password. | ||||
| CagAccessUserNewCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current User validation (enabled or disabled) in new configuration block.
| ||||
| CagAccessUserNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
| ||||
| SagAccessCurStrongPassword | 1.3.6.1.4.1.20301.2.7.15.1.1.19.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of strong password.
| ||||
| SagAccessNewStrongPassword | 1.3.6.1.4.1.20301.2.7.15.1.1.19.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to enabled(1) enables strong password support, while disabled(0) disables it.
| ||||
| SagAccessCurStrongPassValidity | 1.3.6.1.4.1.20301.2.7.15.1.1.19.6 | INTEGER (1..365) | RO | |
scalar · INTEGER (1..365) · read-only · current Password validity in days. | ||||
| SagAccessNewStrongPassValidity | 1.3.6.1.4.1.20301.2.7.15.1.1.19.7 | INTEGER (1..365) | RW | |
scalar · INTEGER (1..365) · read-write · current Get or set password validity in days. | ||||
| SagAccessCurStrongPassWarning | 1.3.6.1.4.1.20301.2.7.15.1.1.19.8 | INTEGER (1..365) | RO | |
scalar · INTEGER (1..365) · read-only · current Warning days before password expires. | ||||
| SagAccessNewStrongPassWarning | 1.3.6.1.4.1.20301.2.7.15.1.1.19.9 | INTEGER (1..365) | RW | |
scalar · INTEGER (1..365) · read-write · current Get or set warning days before password expires. | ||||
| SagAccessCurStrongPassFailLog | 1.3.6.1.4.1.20301.2.7.15.1.1.19.10 | INTEGER (1..255) | RO | |
scalar · INTEGER (1..255) · read-only · current Number of failed logins that trigger security notifications. | ||||
| SagAccessNewStrongPassFailLog | 1.3.6.1.4.1.20301.2.7.15.1.1.19.11 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current Get or set number of failed logins that trigger security notifications. | ||||
| SagAccessCurDefaultAdmin | 1.3.6.1.4.1.20301.2.7.15.1.1.19.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current Get default admin account state. (1) indicates enabled and (0) indicates disabled (0). Default it is enabled.
| ||||
| SagAccessNewDefaultAdmin | 1.3.6.1.4.1.20301.2.7.15.1.1.19.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to enabled (1) will enable the default admin account while disabled (0) will disable the default admin account. Default it is enabled.
| ||||
| SagAccessCurStrongPassLockout | 1.3.6.1.4.1.20301.2.7.15.1.1.19.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of Lockout
| ||||
| SagAccessNewStrongPassLockout | 1.3.6.1.4.1.20301.2.7.15.1.1.19.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to enabled (1) enables account locking after trying for failed login attempts. While disabled (0) disables account locking.
| ||||
| SagAccessCurStrongPassAttemptsMaxFail | 1.3.6.1.4.1.20301.2.7.15.1.1.19.16 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current The max number of failed logins before disabling account. Default value is 6 | ||||
| SagAccessNewStrongPassAttemptsMaxFail | 1.3.6.1.4.1.20301.2.7.15.1.1.19.17 | INTEGER (1..10) | RW | |
scalar · INTEGER (1..10) · read-write · current Sets Max number of failed logins before disabling account. Default value is 6 | ||||
| NagLdapConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.21 | |||
| SldapCurCfgPrimaryIpAddr | 1.3.6.1.4.1.20301.2.7.15.1.1.21.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Primary LDAP server. | ||||
| SldapNewCfgPrimaryIpAddr | 1.3.6.1.4.1.20301.2.7.15.1.1.21.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Primary LDAP server. | ||||
| SldapCurCfgSecondaryIpAddr | 1.3.6.1.4.1.20301.2.7.15.1.1.21.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Secondary LDAP server. | ||||
| SldapNewCfgSecondaryIpAddr | 1.3.6.1.4.1.20301.2.7.15.1.1.21.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Secondary LDAP server. | ||||
| SldapCurCfgPort | 1.3.6.1.4.1.20301.2.7.15.1.1.21.5 | INTEGER (1..65000) | RO | |
scalar · INTEGER (1..65000) · read-only · current Specify the LDAP port number. | ||||
| SldapNewCfgPort | 1.3.6.1.4.1.20301.2.7.15.1.1.21.6 | INTEGER (1..65000) | RW | |
scalar · INTEGER (1..65000) · read-write · current Specify the LDAP port number. | ||||
| SldapCurCfgRetries | 1.3.6.1.4.1.20301.2.7.15.1.1.21.7 | INTEGER (1..3) | RO | |
scalar · INTEGER (1..3) · read-only · current Number of retries to the LDAP server. | ||||
| SldapNewCfgRetries | 1.3.6.1.4.1.20301.2.7.15.1.1.21.8 | INTEGER (1..3) | RW | |
scalar · INTEGER (1..3) · read-write · current Number of retries to the LDAP server. | ||||
| SldapCurCfgTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.21.9 | INTEGER (4..15) | RO | |
scalar · INTEGER (4..15) · read-only · current The maximum number of seconds before resending authentication to LDAP server. | ||||
| SldapNewCfgTimeout | 1.3.6.1.4.1.20301.2.7.15.1.1.21.10 | INTEGER (4..15) | RW | |
scalar · INTEGER (4..15) · read-write · current The maximum number of seconds before resending authentication to LDAP server. | ||||
| SldapCurCfgDomain | 1.3.6.1.4.1.20301.2.7.15.1.1.21.11 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The LDAP domain name. | ||||
| SldapNewCfgDomain | 1.3.6.1.4.1.20301.2.7.15.1.1.21.12 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current The LDAP domain name. | ||||
| SldapCurCfgBackdoor | 1.3.6.1.4.1.20301.2.7.15.1.1.21.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable LDAP backdoor for telnet/ssh/http/https.
| ||||
| SldapNewCfgBackdoor | 1.3.6.1.4.1.20301.2.7.15.1.1.21.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable LDAP backdoor for telnet/ssh/http/https.
| ||||
| SldapCurCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.21.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable LDAP authentication.
| ||||
| SldapNewCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.21.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable LDAP authentication.
| ||||
| SldapCurCfgPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.21.17 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify whether the LDAP should be performed over the data port or the management port.
| ||||
| SldapNewCfgPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.21.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether the LDAP should be performed over the data port or the management port.
| ||||
| SldapCurCfgSecPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.21.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify whether the LDAP should be performed over the data port or the management port.
| ||||
| SldapNewCfgSecPorttoUse | 1.3.6.1.4.1.20301.2.7.15.1.1.21.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether the LDAP should be performed over the data port or the management port.
| ||||
| SldapCurCfgUserNameAttribute | 1.3.6.1.4.1.20301.2.7.15.1.1.21.21 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The LDAP username attribute. | ||||
| SldapNewCfgUserNameAttribute | 1.3.6.1.4.1.20301.2.7.15.1.1.21.22 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current The LDAP username attribute (default = uid). | ||||
| NagSSHConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.22 | |||
| SsshCurCfgScpAdm | 1.3.6.1.4.1.20301.2.7.15.1.1.22.3 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current SCP-only admin password. | ||||
| SsshNewCfgScpAdm | 1.3.6.1.4.1.20301.2.7.15.1.1.22.4 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Set SCP-only admin password. | ||||
| SsshNewCfgHKeyGen | 1.3.6.1.4.1.20301.2.7.15.1.1.22.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to generate the RSA host key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA host key.
| ||||
| SsshCurCfgSSHPort | 1.3.6.1.4.1.20301.2.7.15.1.1.22.7 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current SSH server port number. | ||||
| SsshNewCfgSSHPort | 1.3.6.1.4.1.20301.2.7.15.1.1.22.8 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Set SSH server port number. | ||||
| SsshCurCfgScpApplySave | 1.3.6.1.4.1.20301.2.7.15.1.1.22.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current SCP apply and save.
| ||||
| SsshNewCfgScpApplySave | 1.3.6.1.4.1.20301.2.7.15.1.1.22.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable the SCP apply and save.
| ||||
| SsshCurCfgStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.22.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current SSH server status.
| ||||
| SsshNewCfgStatus | 1.3.6.1.4.1.20301.2.7.15.1.1.22.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Turn SSH server ON/OFF.
| ||||
| NagsFlowConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.24 | |||
| SsflowCurCfgServerAddress | 1.3.6.1.4.1.20301.2.7.15.1.1.24.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the sFlow server. | ||||
| SsflowNewCfgServerAddress | 1.3.6.1.4.1.20301.2.7.15.1.1.24.2 | DisplayString (SIZE (0..46)) | RW | |
scalar · DisplayString (SIZE (0..46)) · read-write · current The IP address of the sFlow server. | ||||
| SsflowCurCfgServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.24.3 | INTEGER (1..65000) | RO | |
scalar · INTEGER (1..65000) · read-only · current Specify the sFlow server port number. | ||||
| SsflowNewCfgServerPort | 1.3.6.1.4.1.20301.2.7.15.1.1.24.4 | INTEGER (1..65000) | RW | |
scalar · INTEGER (1..65000) · read-write · current Specify the sFlow server port number. | ||||
| SsflowCurCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.24.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable sFlow.
| ||||
| SsflowNewCfgState | 1.3.6.1.4.1.20301.2.7.15.1.1.24.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable sFlow
| ||||
| TsflowCurPortCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.24.7 | NA | ||
table · not-accessible · current The table of sFlow port configuration. | ||||
| RsflowCurPortCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.24.7.1 | NA | ||
row · not-accessible · current A row in the sFlow port configuration table. | ||||
| CsflowCurPortCfgTableId | 1.3.6.1.4.1.20301.2.7.15.1.1.24.7.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current sFlow port number. | ||||
| CsflowCurPortSampling | 1.3.6.1.4.1.20301.2.7.15.1.1.24.7.1.2 | INTEGER (256..65536) | RO | |
column · INTEGER (256..65536) · read-only · current The current sFlow port sampling rate. | ||||
| CsflowCurPortPolling | 1.3.6.1.4.1.20301.2.7.15.1.1.24.7.1.3 | INTEGER (5..60) | RO | |
column · INTEGER (5..60) · read-only · current The current sFlow port polling interval. | ||||
| TsflowNewPortCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.24.8 | NA | ||
table · not-accessible · current The table of sFlow port configuration. | ||||
| RsflowNewPortCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.24.8.1 | NA | ||
row · not-accessible · current A row in the sFlow port configuration table. | ||||
| CsflowNewPortCfgTableId | 1.3.6.1.4.1.20301.2.7.15.1.1.24.8.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current sFlow port number. | ||||
| CsflowNewPortSampling | 1.3.6.1.4.1.20301.2.7.15.1.1.24.8.1.2 | INTEGER (256..65536) | RW | |
column · INTEGER (256..65536) · read-write · current The new sFlow port sampling rate. Valid range: 256-65536| 0 for disable | ||||
| CsflowNewPortPolling | 1.3.6.1.4.1.20301.2.7.15.1.1.24.8.1.3 | INTEGER (5..60) | RW | |
column · INTEGER (5..60) · read-write · current The new sFlow port polling interval. Valid range: 5-60| 0 for disable | ||||
| SsflowCurCfgMgmtPort | 1.3.6.1.4.1.20301.2.7.15.1.1.24.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The port that the sFlow server is connected to
| ||||
| SsflowNewCfgMgmtPort | 1.3.6.1.4.1.20301.2.7.15.1.1.24.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Chose the port that the sFlow server will connect to
| ||||
| NagUSBCopy | 1.3.6.1.4.1.20301.2.7.15.1.1.25 | |||
| SagUSBoperation | 1.3.6.1.4.1.20301.2.7.15.1.1.25.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set operation: fromUSB(1): from USB to Flash toUSB(2): from Flash to USB
| ||||
| SagUSBfile | 1.3.6.1.4.1.20301.2.7.15.1.1.25.2 | DisplayString (SIZE (0..255)) | RW | |
scalar · DisplayString (SIZE (0..255)) · read-write · current USB filename (to copy from or to copy to) | ||||
| SagUSBflashFile | 1.3.6.1.4.1.20301.2.7.15.1.1.25.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set flash file involved (boot image, image 1, active configuration, syslog, crashdump). Syslog and crashdump can only be copied to USB. (it is forbidden to copy from USB to flash)
| ||||
| SagUSBcopyFile | 1.3.6.1.4.1.20301.2.7.15.1.1.25.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned. idle(1) indicates that there is no copy in progess. complete(4) indicates that the last copy operation is completed. Setting the value to copy(1), will execute the operation (copy to or from USB stick). If the copy is successful this variable will return the state 'complete' else it will return 'failed'. Once the operation is completed, agUSBcopyFile should be set back to 'idle' state so others can issue the copy command via SNMP.
| ||||
| SagUSBresult | 1.3.6.1.4.1.20301.2.7.15.1.1.25.5 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Last USB Copy action result. | ||||
| NagQsfp40GConfig | 1.3.6.1.4.1.20301.2.7.15.1.1.26 | |||
| TagQsfp40GCfgTable | 1.3.6.1.4.1.20301.2.7.15.1.1.26.1 | NA | ||
table · not-accessible · current The QSFP 40G ports configuration table | ||||
| Rqsfp40GPortEntry | 1.3.6.1.4.1.20301.2.7.15.1.1.26.1.1 | NA | ||
| CqsfpPortNumber | 1.3.6.1.4.1.20301.2.7.15.1.1.26.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The port number | ||||
| CqsfpPortBootedMode | 1.3.6.1.4.1.20301.2.7.15.1.1.26.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The booted port configuration, either mode10G(1) for 10 G, or mode40G(2) for 40 G mode.
| ||||
| CqsfpPortSavedMode | 1.3.6.1.4.1.20301.2.7.15.1.1.26.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The saved port configuration, either mode10G(1) for 10 G, or mode40G(2) for 40 G mode.
| ||||
| NagentStats | 1.3.6.1.4.1.20301.2.7.15.1.2 | |||
| NpktStats | 1.3.6.1.4.1.20301.2.7.15.1.2.1 | |||
| SpktStatsAllocs | 1.3.6.1.4.1.20301.2.7.15.1.2.1.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsFrees | 1.3.6.1.4.1.20301.2.7.15.1.2.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsAllocFails | 1.3.6.1.4.1.20301.2.7.15.1.2.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsMediums | 1.3.6.1.4.1.20301.2.7.15.1.2.1.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsJumbos | 1.3.6.1.4.1.20301.2.7.15.1.2.1.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsSmalls | 1.3.6.1.4.1.20301.2.7.15.1.2.1.6 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsMediumsHiWatermark | 1.3.6.1.4.1.20301.2.7.15.1.2.1.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsJumbosHiWatermark | 1.3.6.1.4.1.20301.2.7.15.1.2.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsSmallsHiWatermark | 1.3.6.1.4.1.20301.2.7.15.1.2.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size less than or equal to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| NmpCpuStats | 1.3.6.1.4.1.20301.2.7.15.1.2.2 | |||
| SmpCpuStatsUtil1Second | 1.3.6.1.4.1.20301.2.7.15.1.2.2.1 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The utilization of MP CPU over 1 second. It shows the percentage. | ||||
| SmpCpuStatsUtil5Seconds | 1.3.6.1.4.1.20301.2.7.15.1.2.2.2 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The utilization of MP CPU over 5 seconds. It shows the percentage. | ||||
| SmpCpuStatsUtil1Minute | 1.3.6.1.4.1.20301.2.7.15.1.2.2.3 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The utilization of MP CPU over 1 minute. It shows the percentage. | ||||
| TcpuUtilProcessStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5 | NA | ||
table · not-accessible · current The table of CPU utilization per process statistics. | ||||
| RcpuUtilProcessStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1 | NA | ||
| CprocessId | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The process ID. | ||||
| CprocessName | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Process Name. | ||||
| CcpuProcessUtil1Sec | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.3 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The utilization of MP CPU over 1 second. It shows the percentage. | ||||
| CcpuProcessUtil5Sec | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.4 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The utilization of MP CPU over 5 seconds. It shows the percentage. | ||||
| CcpuProcessUtil1Min | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.5 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The utilization of MP CPU over 1 min. It shows the percentage. | ||||
| CcpuProcessUtil5Min | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.6 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The utilization of MP CPU over 5 min. It shows the percentage. | ||||
| CprocessStatus | 1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.7 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Process Status | ||||
| SmpCpuStatsUtil5Minutes | 1.3.6.1.4.1.20301.2.7.15.1.2.2.6 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The utilization of MP CPU over 5 minutes. It shows the percentage. | ||||
| NportStats | 1.3.6.1.4.1.20301.2.7.15.1.2.3 | |||
| TportStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1 | NA | ||
table · not-accessible · current The table of port statistics. | ||||
| RportStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1 | NA | ||
| CportStatsIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index. | ||||
| CportStatsPhyIfInOctets | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of octets received on the interface, including framing characters. | ||||
| CportStatsPhyIfInUcastPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of subnetwork-unicast packets delivered to a higher-layer protocol. | ||||
| CportStatsPhyIfInNUcastPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | ||||
| CportStatsPhyIfInDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | ||||
| CportStatsPhyIfInErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | ||||
| CportStatsPhyIfInUnknownProtos | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. | ||||
| CportStatsPhyIfOutOctets | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of octets transmitted out of the interface, including framing characters. | ||||
| CportStatsPhyIfOutUcastPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | ||||
| CportStatsPhyIfOutNUcastPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | ||||
| CportStatsPhyIfOutDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | ||||
| CportStatsPhyIfOutErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound packets that could not be transmitted because of errors. | ||||
| CportStatsPhyIfOutQLen | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current The length of the output packet queue (in packets). | ||||
| CportStatsPhyIfInBroadcastPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. | ||||
| CportStatsPhyIfOutBroadcastPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. | ||||
| CportStatsClear | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(2) clears the stats for this port.
| ||||
| CportStatsPhyIfInMulticastPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. | ||||
| CportStatsPhyIfOutMulticastPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. | ||||
| CportStatsLinkStateChange | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current Number of link state changes. | ||||
| CportStatsPhyIfInFctlPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound flow control packets. | ||||
| CportStatsPhyIfOutFctlPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound flow control packets. | ||||
| CportStatsPhyIfInFctlPktsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound flow control packets per second. | ||||
| CportStatsPhyIfOutFctlPktsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound flow control packets per second. | ||||
| CportStatsPhyIfIngDiscdVlan | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of VLAN. | ||||
| CportStatsPhyIfIngDiscdEgrMap | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of empty egress portmap. | ||||
| CportStatsPhyIfIngDiscdFilter | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of filter. | ||||
| CportStatsPhyIfIngDiscdPolicy | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of policy. | ||||
| CportStatsPhyIfIngDiscdNonFwdStat | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of Non-Forwarding State. | ||||
| CportStatsPhyIfIngDiscdIbpCbp | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded because of IBP/CBP. | ||||
| CportStatsDot1PortInFrames | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.31 | Counter32 | RO | |
column · Counter32 · read-only · current The number of IN frames per port. | ||||
| CportStatsDot1PortOutFrames | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.32 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OUT frames per port. | ||||
| CportStatsDot1PortInDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.33 | Counter32 | RO | |
column · Counter32 · read-only · current The number of IN packets discarded per port. | ||||
| CportStatsDot1TpLearnedEntryDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.34 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Dot1Tp learned entries discarded. | ||||
| CportStatsDot1StpPortForwardTransitions | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.35 | Counter32 | RO | |
column · Counter32 · read-only · current The number of transitions .... | ||||
| CportStatsPhyIfEgrHOLBlockDiscd | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.36 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of HOL Blocking. | ||||
| CportStatsPhyIfEgrMMUDiscd | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.37 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded by MMU because of zero port bitmap. | ||||
| CportStatsPhyIfEgrCellErrDiscd | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.38 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of Cell Errors or purging. | ||||
| CportStatsPhyIfEgrMMUAgeDiscd | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.39 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of MMU Aging. Applicable in 10/100 mode, incremented for frames aborted which were deferred for an excessive period of time. | ||||
| CportStatsPhyIfEgrOtherDiscd | 1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.40 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, discarded because of Other reasons. | ||||
| Tdot1xPortStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2 | NA | ||
table · not-accessible · current The table of 802.1x port statistics. | ||||
| Rdot1xPortStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1 | NA | ||
| Cdot1xPortStatsIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The 802.1x port stats index. | ||||
| CeapolFramesRx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.2 | Integer32 | RO | |
| CeapolFramesTx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.3 | Integer32 | RO | |
| CeapolStartFramesRx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.4 | Integer32 | RO | |
| CeapolLogoffFramesRx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.5 | Integer32 | RO | |
| CeapolRespIdFramesRx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.6 | Integer32 | RO | |
| CeapolRespFramesRx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.7 | Integer32 | RO | |
| CeapolReqIdFramesTx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.8 | Integer32 | RO | |
| CeapolReqFramesTx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.9 | Integer32 | RO | |
| CinvalidEapolFramesRx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.10 | Integer32 | RO | |
| CeapLengthErrorFramesRx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.11 | Integer32 | RO | |
| CauthEntersConnecting | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.12 | Integer32 | RO | |
| CauthEapLogoffsWhileConnecting | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.13 | Integer32 | RO | |
| CauthEntersAuthenticating | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.14 | Integer32 | RO | |
| CauthSuccessesWhileAuthenticating | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.15 | Integer32 | RO | |
| CauthTimeoutsWhileAuthenticating | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.16 | Integer32 | RO | |
| CauthFailWhileAuthenticating | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.17 | Integer32 | RO | |
| CauthReauthsWhileAuthenticating | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.18 | Integer32 | RO | |
| CauthEapStartsWhileAuthenticating | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.19 | Integer32 | RO | |
| CauthEapLogoffWhileAuthenticating | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.20 | Integer32 | RO | |
| CauthReauthsWhileAuthenticated | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.21 | Integer32 | RO | |
| CauthEapStartsWhileAuthenticated | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.22 | Integer32 | RO | |
| CauthEapLogoffWhileAuthenticated | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.23 | Integer32 | RO | |
| CbackendResponses | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.24 | Integer32 | RO | |
| CbackendAccessChallenges | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.25 | Integer32 | RO | |
| CbackendOtherRequestsToSupplicant | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.26 | Integer32 | RO | |
| CbackendNonNakResponsesFromSupplicant | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.27 | Integer32 | RO | |
| CbackendAuthSuccesses | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.28 | Integer32 | RO | |
| CbackendAuthFails | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.29 | Integer32 | RO | |
| ClastEapolFrameVersion | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.30 | Integer32 | RO | |
| ClastEapolFrameSource | 1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.31 | MacAddress | RO | |
| TportMgmtStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3 | NA | ||
table · not-accessible · current The table of port statistics. | ||||
| RportMgmtStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1 | NA | ||
| CportMgmtStatsIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The management port index. | ||||
| CportMgmtStatsRxBytes | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of bytes received. | ||||
| CportMgmtStatsTxBytes | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of bytes transmitted. | ||||
| CportMgmtStatsRxpackets | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. | ||||
| CportMgmtStatsTxpackets | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. | ||||
| CportMgmtStatsRxErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | ||||
| CportMgmtStatsTxErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | ||||
| CportMgmtStatsRxDropped | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound packets that were dropped. | ||||
| CportMgmtStatsTxDropped | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound packets that were dropped. | ||||
| CportMgmtStatsRxOverruns | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of data overruns over this link. | ||||
| CportMgmtStatsTxOverruns | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of data overruns over this link. | ||||
| CportMgmtStatsRxFrame | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of frames received on this link. | ||||
| CportMgmtStatsTxCarrier | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface. | ||||
| CportMgmtStatsRxMulticast | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of multicast packets received. | ||||
| CportMgmtStatsTxCollisions | 1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of collisions on this outbound segment. | ||||
| TallportsStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4 | NA | ||
table · not-accessible · current The table of all ports statistics. | ||||
| RallportsStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1 | NA | ||
| CallportsStatsIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number. | ||||
| CallportsStatsDescr | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.2 | DisplayString (SIZE (0..7)) | RO | |
column · DisplayString (SIZE (0..7)) · read-only · current The port description. | ||||
| CallportsStatsSpeed | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational speed of the port.
| ||||
| CallportsStatsPhysAddress | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.4 | PhysAddress | RO | |
column · PhysAddress · read-only · current The port MAC Address. | ||||
| CallportsStatsAdminStatus | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The port Admin state.
| ||||
| CallportsStatsOperStatus | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The port Operational Status.
| ||||
| CallportsStatsInOctets | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Octets In for port. | ||||
| CallportsStatsOutOctets | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Octets Out for port. | ||||
| CallportsStatsInPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Packets In for port. | ||||
| CallportsStatsOutPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Packets Out for port. | ||||
| CallportsStatsInUcast | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.11 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Unicast Packets In for port. | ||||
| CallportsStatsOutUcast | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.12 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Unicast Packets Out for port. | ||||
| CallportsStatsInBcast | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.13 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Broadcasts Packets In for port. | ||||
| CallportsStatsOutBcast | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.14 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Broadcasts Packets Out for port. | ||||
| CallportsStatsInMcast | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.15 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Multicast Packets In for port. | ||||
| CallportsStatsOutMcast | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.16 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Multicast Packets Out for port. | ||||
| CallportsStatsInDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current Discarded Packets for port. | ||||
| CallportsStatsOutDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current Outbound Packets for port. | ||||
| CallportsStatsInErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current Error Packets for port. | ||||
| CallportsStatsOutErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current Not sent packets due to error. | ||||
| CallportsStatsInUnknownProtos | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.21 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Unknown protocol packets. | ||||
| CallportsStatsOutQLen | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.22 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Outbound Packet Queue Length. | ||||
| CallportsStatsipInReceives | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Receives. | ||||
| CallportsStatsipInHeaderErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Header Errors. | ||||
| CallportsStatsipInDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Discards. | ||||
| CallportsStatsLinkStateChange | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current Number of link state changes. | ||||
| CallportsStatsipInReceivesRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Receives rate. | ||||
| CallportsStatsipInHeaderErrorsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Header Errors rate. | ||||
| CallportsStatsipInDiscardsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Discards rate. | ||||
| CallportsStatsInOctetsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current Octets In rate for port. | ||||
| CallportsStatsOutOctetsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.31 | Counter32 | RO | |
column · Counter32 · read-only · current Octets Out rate for port. | ||||
| CallportsStatsInUcastRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.32 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Unicast Packets In rate for port. | ||||
| CallportsStatsOutUcastRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.33 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Unicast Packets Out rate for port. | ||||
| CallportsStatsInBcastRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.34 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Broadcasts Packets In rate for port. | ||||
| CallportsStatsOutBcastRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.35 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Broadcasts Packets Out rate for port. | ||||
| CallportsStatsInMcastRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.36 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Multicast Packets In rate for port. | ||||
| CallportsStatsOutMcastRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.37 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Multicast Packets Out rate for port. | ||||
| CallportsStatsInDiscardsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.38 | Counter32 | RO | |
column · Counter32 · read-only · current Discarded In Packets rate for port. | ||||
| CallportsStatsOutDiscardsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.39 | Counter32 | RO | |
column · Counter32 · read-only · current Discarded Out Packets rate for port. | ||||
| CallportsStatsInErrorsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.40 | Counter32 | RO | |
column · Counter32 · read-only · current Erroneus inbound packets rate for port. | ||||
| CallportsStatsOutErrorsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.41 | Counter32 | RO | |
column · Counter32 · read-only · current Not sent packets due to error rate. | ||||
| SclearPortsStats | 1.3.6.1.4.1.20301.2.7.15.1.2.3.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(2) results in clearing the statistics for all ports.
| ||||
| Tdot1RateStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.3.7 | NA | ||
table · not-accessible · current The table of bridging statistics per second. | ||||
| Rdot1RateStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1 | NA | ||
| Cdot1RateStatsIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index. | ||||
| Cdot1RatePortInFrames | 1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The number of frames that have been received per second by this port from its segment. | ||||
| Cdot1RatePortOutFrames | 1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of frames that have been transmitted per second by this port to its segment. | ||||
| Cdot1RatePortInDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Count of valid frames received which were discarded per second. | ||||
| Cdot1RateTpLearnedEntryDiscards | 1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number per second of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them. | ||||
| Cdot1RateStpPortForwardTransitions | 1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this port has transitioned per second from the Learning state to the Forwarding state. | ||||
| Tdot3RateStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8 | NA | ||
table · not-accessible · current The table of Ethernet statistics per second. | ||||
| Rdot3RateStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1 | NA | ||
| Cdot3RateStatsIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index. | ||||
| Cdot3RateStatsAlignmentErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current A count of frames received per second on a particular interface that are not an integral number of octets in length and do not pass the FCS check. | ||||
| Cdot3RateStatsFCSErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current A count of frames received per second on a particular interface that are an integral number of octets in length but do not pass the FCS check. | ||||
| Cdot3RateStatsSingleCollisionFrames | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current A count of successfully transmitted frames per second on a particular interface for which transmission is inhibited by exactly one collision. | ||||
| Cdot3RateStatsMultipleCollisionFrames | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current A count of successfully transmitted frames per second on a particular interface for which transmission is inhibited by more than one collision. | ||||
| Cdot3RateStatsLateCollisions | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times per second that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. | ||||
| Cdot3RateStatsExcessiveCollisions | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current A count per second of frames for which transmission on a particular interface fails due to excessive collisions. | ||||
| Cdot3RateStatsInternalMacTransmitErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current A count per second of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. | ||||
| Cdot3RateStatsFrameTooLongs | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current A count per second of frames received on a particular interface that exceed the maximum permitted frame size. | ||||
| Cdot3RateStatsInternalMacReceiveErrors | 1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current A count per second of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. | ||||
| TportQoSCounterTable | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9 | NA | ||
table · not-accessible · current The table for QoS counters. | ||||
| RportQoSCounterTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1 | NA | ||
| CportQoSIndex | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the port | ||||
| CqueueQoSIndex | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the queue per port. | ||||
| CtxPackets | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total Tx packets. | ||||
| CdroppedPackets | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The dropped packets. | ||||
| CtxBytes | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total Tx bytes. | ||||
| CdroppedBytes | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The dropped bytes. | ||||
| CtxPacketsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The Tx packets rate. | ||||
| CdroppedPacketsRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The dropped packets rate. | ||||
| CtxBytesRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The Tx bytes rate. | ||||
| CdroppedBytesRate | 1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The dropped bytes rate. | ||||
| NagClearStats | 1.3.6.1.4.1.20301.2.7.15.1.2.7 | |||
| SsnmpClearStats | 1.3.6.1.4.1.20301.2.7.15.1.2.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(2) results in clearing the SNMP statistics.
| ||||
| NntpStats | 1.3.6.1.4.1.20301.2.7.15.1.2.9 | |||
| SntpPrimaryServerReqSent | 1.3.6.1.4.1.20301.2.7.15.1.2.9.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP requests sent to Primary NTP Server. | ||||
| SntpPrimaryServerRespRcvd | 1.3.6.1.4.1.20301.2.7.15.1.2.9.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP responces received from Primary NTP Server. | ||||
| SntpPrimaryServerUpdates | 1.3.6.1.4.1.20301.2.7.15.1.2.9.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP Updates by Primary NTP Server. | ||||
| SntpSecondaryServerReqSent | 1.3.6.1.4.1.20301.2.7.15.1.2.9.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP requests sent to Secondary NTP Server. | ||||
| SntpSecondaryServerRespRcvd | 1.3.6.1.4.1.20301.2.7.15.1.2.9.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP responces received from Secondary NTP Server. | ||||
| SntpSecondaryServerUpdates | 1.3.6.1.4.1.20301.2.7.15.1.2.9.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP Updates by Secondary NTP Server. | ||||
| SntpLastUpdateServer | 1.3.6.1.4.1.20301.2.7.15.1.2.9.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The type of ntp server updated last time.
| ||||
| SntpLastUpdateTime | 1.3.6.1.4.1.20301.2.7.15.1.2.9.8 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The last time updated by ntp server. | ||||
| SntpClearStats | 1.3.6.1.4.1.20301.2.7.15.1.2.9.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the stats for ntp.
| ||||
| SntpSystemCurrentTime | 1.3.6.1.4.1.20301.2.7.15.1.2.9.10 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The current system time. | ||||
| NaclStats | 1.3.6.1.4.1.20301.2.7.15.1.2.11 | |||
| TaclStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.11.1 | NA | ||
table · not-accessible · current The table of ACL statistics. | ||||
| RaclStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.11.1.1 | NA | ||
row · not-accessible · current Statistics about a particular ACL configuration entry.
| ||||
| CaclStatsIndex | 1.3.6.1.4.1.20301.2.7.15.1.2.11.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The acl index. | ||||
| CaclStatsHits | 1.3.6.1.4.1.20301.2.7.15.1.2.11.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of hits for this ACL entry | ||||
| CaclClearStats | 1.3.6.1.4.1.20301.2.7.15.1.2.11.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(2) clears the stats for the ACL.
| ||||
| TvmapStatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.11.2 | NA | ||
table · not-accessible · current The table of VMAP statistics. | ||||
| RvmapStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.11.2.1 | NA | ||
row · not-accessible · current Statistics about a particular VMAP configuration entry.
| ||||
| CvmapStatsIndex | 1.3.6.1.4.1.20301.2.7.15.1.2.11.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vmap index. | ||||
| CvmapStatsHits | 1.3.6.1.4.1.20301.2.7.15.1.2.11.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of hits for this VMAP entry | ||||
| CvmapClearStats | 1.3.6.1.4.1.20301.2.7.15.1.2.11.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(2) clears the stats for the VMAP.
| ||||
| Tacl6StatsTable | 1.3.6.1.4.1.20301.2.7.15.1.2.11.3 | NA | ||
table · not-accessible · current The table of IPv6 ACL statistics. | ||||
| Racl6StatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.11.3.1 | NA | ||
row · not-accessible · current Statistics about a particular IPv6 ACL configuration entry.
| ||||
| Cacl6StatsIndex | 1.3.6.1.4.1.20301.2.7.15.1.2.11.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The ipv6 acl index. | ||||
| Cacl6StatsHits | 1.3.6.1.4.1.20301.2.7.15.1.2.11.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of hits for this IPv6 ACL entry | ||||
| Cacl6ClearStats | 1.3.6.1.4.1.20301.2.7.15.1.2.11.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(2) clears the stats for the IPv6 ACL.
| ||||
| NmemoryStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12 | |||
| StotalMemoryStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total memory in bytes. | ||||
| SmemoryFreeStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The free memory in bytes. | ||||
| SmemorySharedStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current The shared memory in bytes. | ||||
| SmemoryBufferStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12.4 | Counter64 | RO | |
scalar · Counter64 · read-only · current The buffer memory in bytes. | ||||
| SswapTotalStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total swap memory in bytes. | ||||
| SswapFreeStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The free swap memory in bytes. | ||||
| ShighTotalStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12.7 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total high memory in bytes. | ||||
| ShighFreeStats | 1.3.6.1.4.1.20301.2.7.15.1.2.12.8 | Counter64 | RO | |
scalar · Counter64 · read-only · current The free high memory in bytes. | ||||
| NsnmpStats | 1.3.6.1.4.1.20301.2.7.15.1.2.20 | |||
| SnsnmpInPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.20.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInPkts | ||||
| SnsnmpInBadCommunityNames | 1.3.6.1.4.1.20301.2.7.15.1.2.20.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInBadCommunityNames | ||||
| SnsnmpInASNParseErrs | 1.3.6.1.4.1.20301.2.7.15.1.2.20.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInASNParseErrs | ||||
| SnsnmpOutPkts | 1.3.6.1.4.1.20301.2.7.15.1.2.20.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutPkts | ||||
| SnsnmpInTooBigs | 1.3.6.1.4.1.20301.2.7.15.1.2.20.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInTooBigs | ||||
| SnsnmpInBadValues | 1.3.6.1.4.1.20301.2.7.15.1.2.20.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInBadValues | ||||
| SnsnmpInGenErrs | 1.3.6.1.4.1.20301.2.7.15.1.2.20.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInGenErrs | ||||
| SnsnmpInTotalSetVars | 1.3.6.1.4.1.20301.2.7.15.1.2.20.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInTotalSetVars | ||||
| SnsnmpInGetNexts | 1.3.6.1.4.1.20301.2.7.15.1.2.20.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInGetNexts | ||||
| SnsnmpInGetResponses | 1.3.6.1.4.1.20301.2.7.15.1.2.20.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInGetResponses | ||||
| SnsnmpOutTooBigs | 1.3.6.1.4.1.20301.2.7.15.1.2.20.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutTooBigs | ||||
| SnsnmpOutBadValues | 1.3.6.1.4.1.20301.2.7.15.1.2.20.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutBadValues | ||||
| SnsnmpOutGenErrs | 1.3.6.1.4.1.20301.2.7.15.1.2.20.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutGenErrs | ||||
| SnsnmpOutGetNexts | 1.3.6.1.4.1.20301.2.7.15.1.2.20.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutGetNexts | ||||
| SnsnmpOutGetResponses | 1.3.6.1.4.1.20301.2.7.15.1.2.20.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutGetResponses | ||||
| SnsnmpSilentDrops | 1.3.6.1.4.1.20301.2.7.15.1.2.20.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpSilentDrops | ||||
| SnsnmpInBadVersions | 1.3.6.1.4.1.20301.2.7.15.1.2.20.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInBadVersions | ||||
| SnsnmpInBadCommunityUses | 1.3.6.1.4.1.20301.2.7.15.1.2.20.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInBadCommunityUses | ||||
| SnsnmpEnableAuthTraps | 1.3.6.1.4.1.20301.2.7.15.1.2.20.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpEnableAuthTraps | ||||
| SnsnmpInBadTypes | 1.3.6.1.4.1.20301.2.7.15.1.2.20.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInBadTypes | ||||
| SnsnmpInNoSuchNames | 1.3.6.1.4.1.20301.2.7.15.1.2.20.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInNoSuchNames | ||||
| SnsnmpInReadOnlys | 1.3.6.1.4.1.20301.2.7.15.1.2.20.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInReadOnlys | ||||
| SnsnmpInTotalReqVars | 1.3.6.1.4.1.20301.2.7.15.1.2.20.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInTotalReqVars | ||||
| SnsnmpInGetRequests | 1.3.6.1.4.1.20301.2.7.15.1.2.20.24 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInGetRequests | ||||
| SnsnmpInSetRequests | 1.3.6.1.4.1.20301.2.7.15.1.2.20.25 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInSetRequests | ||||
| SnsnmpInTraps | 1.3.6.1.4.1.20301.2.7.15.1.2.20.26 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpInTraps | ||||
| SnsnmpOutNoSuchNames | 1.3.6.1.4.1.20301.2.7.15.1.2.20.27 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutNoSuchNames | ||||
| SnsnmpOutReadOnlys | 1.3.6.1.4.1.20301.2.7.15.1.2.20.28 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutReadOnlys | ||||
| SnsnmpOutGetRequests | 1.3.6.1.4.1.20301.2.7.15.1.2.20.29 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutGetRequests | ||||
| SnsnmpOutSetRequests | 1.3.6.1.4.1.20301.2.7.15.1.2.20.30 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutSetRequests | ||||
| SnsnmpOutTraps | 1.3.6.1.4.1.20301.2.7.15.1.2.20.31 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpOutTraps | ||||
| SnsnmpProxyDrops | 1.3.6.1.4.1.20301.2.7.15.1.2.20.32 | Counter32 | RO | |
scalar · Counter32 · read-only · current snmpProxyDrops | ||||
| NmpTcbStats | 1.3.6.1.4.1.20301.2.7.15.1.2.21 | |||
| TtcpControlBlocksTable | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1 | NA | ||
table · not-accessible · current All TCP allocated control blocks | ||||
| RtcpControlBlocksTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1 | NA | ||
| CtcpControlBlocksIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The TCP blocks index. | ||||
| CdestAddr | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The TCP block destination address. | ||||
| CremotePort | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Tcp informations concerning the remote port | ||||
| CsourceAddr | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current IP address of the source of the Tcp block | ||||
| ClocalPort | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Tcp informations concerning the local port | ||||
| Cstate | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The state of the Tcp | ||||
| CportType | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The type of the local port | ||||
| CportState | 1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The state of the local port | ||||
| TtcpMGMTControlBlocksTable | 1.3.6.1.4.1.20301.2.7.15.1.2.21.2 | NA | ||
table · not-accessible · current All TCP allocated control blocks on MGMT port | ||||
| RtcpMGMTTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1 | NA | ||
| CtcpMGMTIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Index in the tcpMGMTControlBlocksTable table. | ||||
| CrecvQ | 1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The size of the received TCP queue. | ||||
| CsentQ | 1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The size of the sent TCP blocks queue. | ||||
| ClocalAddress | 1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The local address for the TCP. | ||||
| CforeignAddress | 1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The remote address for the TCP. | ||||
| CstateMgmt | 1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The port's state. | ||||
| NmpUdpStats | 1.3.6.1.4.1.20301.2.7.15.1.2.22 | |||
| TudpControlBlocksTable | 1.3.6.1.4.1.20301.2.7.15.1.2.22.1 | NA | ||
table · not-accessible · current All UDP control blocks in use | ||||
| RudpControlBlocksTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.22.1.1 | NA | ||
| CudpMpLocalPort | 1.3.6.1.4.1.20301.2.7.15.1.2.22.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The current UDP local port. | ||||
| CudpMpState | 1.3.6.1.4.1.20301.2.7.15.1.2.22.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The port's state. | ||||
| TudpMGMTControlBlocksTable | 1.3.6.1.4.1.20301.2.7.15.1.2.22.2 | NA | ||
table · not-accessible · current All UDP control blocks allocated on MGMT port | ||||
| RudpMGMTTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1 | NA | ||
| CudpMGMTIndx | 1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Index in the udpMGMTControlBlocksTable table. | ||||
| CrecvQUdp | 1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The size of the received UDP queue. | ||||
| CsentQUdp | 1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The size of the sent UDP blocks queue. | ||||
| ClocalAddressUdp | 1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The local address for the UDP. | ||||
| CforeignAddressUdp | 1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The remote address for the UDP. | ||||
| CstateMgmtUdp | 1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The port's state. | ||||
| NagentInfo | 1.3.6.1.4.1.20301.2.7.15.1.3 | |||
| Nhardware | 1.3.6.1.4.1.20301.2.7.15.1.3.1 | |||
| ShwPartNumber | 1.3.6.1.4.1.20301.2.7.15.1.3.1.1 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The hardware part number of the Switch. | ||||
| ShwRevision | 1.3.6.1.4.1.20301.2.7.15.1.3.1.2 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The hardware revision. If the revision is not available, a zero length string should be returned. | ||||
| ShwFanStatus | 1.3.6.1.4.1.20301.2.7.15.1.3.1.12 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The fan status on the system. | ||||
| ShwFanSpeed | 1.3.6.1.4.1.20301.2.7.15.1.3.1.13 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The fan speed on the system. | ||||
| ShwTempSensors | 1.3.6.1.4.1.20301.2.7.15.1.3.1.14 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The temperature sensors on the system. | ||||
| ShwGlobalHealthStatus | 1.3.6.1.4.1.20301.2.7.15.1.3.1.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current This variable summarizes the statuses of several key elements of the device. OK: - All temperature sensors are below the warning threshold (eg. < 85 C); - All fans are running at >= 100 RPMs; - Both power supplies are on; - No panic dump exists in flash. Non-critical: - One or more temperature sensors is in the warning range (eg. >= 85 and < 100 C); - A panic dump exists in flash. Critical: - One or more temperature sensors is in the failure range (eg. >= 100 C); - One or more fans are running < 100 RPM; - One power supply is off.
| ||||
| NportInfo | 1.3.6.1.4.1.20301.2.7.15.1.3.2 | |||
| TportInfoTable | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1 | NA | ||
table · not-accessible · current The table of port information. | ||||
| RportInfoTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1 | NA | ||
| CportInfoIndx | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index. | ||||
| CportInfoSpeed | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational speed of the port.
| ||||
| CportInfoMode | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational mode of the port.
| ||||
| CportInfoFlowCtrl | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational flow control of the port.
| ||||
| CportInfoLink | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational link status of the port.
| ||||
| CportInfoPhyIfDescr | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.6 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface. | ||||
| CportInfoPhyIfType | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
| ||||
| CportInfoPhyIfMtu | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. | ||||
| CportInfoPhyIfPhysAddress | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.9 | PhysAddress | RO | |
column · PhysAddress · read-only · current The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. | ||||
| CportInfoPhyIfOperStatus | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
| ||||
| CportInfoPhyIfLastChange | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.11 | TimeTicks | RO | |
column · TimeTicks · read-only · current The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | ||||
| CportInfoLearning | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current The port L2 (FDB) Learning state.
| ||||
| CportInfoBpduGuard | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current The operational status of BPDU Guard on the port.
| ||||
| CportInfoPvid | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.21 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This is the operational port vlan-id of the port. Typically, the value of this object is the same as the value of the agPortCurCfgPVID object. But if, for example, 802.1x is enabled on the port and the port is assigned a vlan-id via 802.1x, this port will be moved to the assigned vlan even when the port is configured with a different PVID. | ||||
| CportInfoVlanTag | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This is the operational VLAN tag state of the port. Typically, the value of this object is the same as the value of the agPortCurCfgVlanTag objec. But if, for example, 802.1x is enabled on the port and if the port is assigned a vlan via 802.1x, the port will be operationally untagged even when the port is configured to be tagged.
| ||||
| CportInfoErrDisableRecovery | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether the system will automatically re-enable an error-disabled port after the time interval indicated by agCurCfgErrDisableTimeout has elapsed. A port is in error-disabled state when it has been operationally disabled by the system due to an error condition. The value of this object is 'enable' if the values of both the global agCurCfgErrDisableRecovery object and the port's agPortCurCfgErrDisableRecovery object are 'enable'.
| ||||
| CportInfoErrDisableTimeLeft | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.24 | INTEGER (0..86400) | RO | |
column · INTEGER (0..86400) · read-only · current If the portInfoErrDisableRecovery object has a value of 'enable' and the portInfoLink object has a value of 'errdisabled', the value of this object indicates the remaining time, in seconds, before the system automatically re-enables this port. | ||||
| CportInfoExtGuard | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current The operational status of STP Loop/Root Guard on the port.
| ||||
| CportInfoLFDState | 1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether the port is error-disabled due to excessive link flaps. The value of this object is 'yes' if the port is error-disabled due to excessive link flaps, otherwise the value is 'no'.
| ||||
| NagDiff | 1.3.6.1.4.1.20301.2.7.15.1.3.4 | |||
| SagDiffState | 1.3.6.1.4.1.20301.2.7.15.1.3.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete. Once the agDiffTable is read the state should be set back to 'idle' which frees the diff buffer and others can issue a diff command via SNMP.
| ||||
| SagDiffTableSize | 1.3.6.1.4.1.20301.2.7.15.1.3.4.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the diff table. | ||||
| TagDiffTable | 1.3.6.1.4.1.20301.2.7.15.1.3.4.4 | NA | ||
table · not-accessible · current The table of diff strings. | ||||
| RagDiffTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.3.4.4.1 | NA | ||
| CagDiffIndex | 1.3.6.1.4.1.20301.2.7.15.1.3.4.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagDiffString | 1.3.6.1.4.1.20301.2.7.15.1.3.4.4.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the diff table. | ||||
| NagCfgDump | 1.3.6.1.4.1.20301.2.7.15.1.3.5 | |||
| SagCfgDumpState | 1.3.6.1.4.1.20301.2.7.15.1.3.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP.
| ||||
| SagCfgDumpTableSize | 1.3.6.1.4.1.20301.2.7.15.1.3.5.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the dump table. | ||||
| TagCfgDumpTable | 1.3.6.1.4.1.20301.2.7.15.1.3.5.4 | NA | ||
table · not-accessible · current The table of dump strings. | ||||
| RagCfgDumpTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.3.5.4.1 | NA | ||
| CagCfgDumpIndex | 1.3.6.1.4.1.20301.2.7.15.1.3.5.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagCfgDumpString | 1.3.6.1.4.1.20301.2.7.15.1.3.5.4.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the dump table. | ||||
| NgeaportInfo | 1.3.6.1.4.1.20301.2.7.15.1.3.9 | |||
| TgeaportInfoTable | 1.3.6.1.4.1.20301.2.7.15.1.3.9.1 | NA | ||
table · not-accessible · current The table of gea port mapping. | ||||
| RgeaportInfoTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1 | NA | ||
| CgeaportInfoLogicalIndex | 1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The logical port index. | ||||
| CgeaportInfoAlias | 1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The GEA Port Alias. | ||||
| CgeaportInfoPort | 1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The GEA Port (0-based). | ||||
| CgeaportInfoUnit | 1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The GEA Unit. | ||||
| NsfpInfo | 1.3.6.1.4.1.20301.2.7.15.1.3.11 | |||
| TsfpInfoTable | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1 | NA | ||
table · not-accessible · current The table of external port SFP information. | ||||
| RsfpInfoTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1 | NA | ||
| CsfpInfoIndx | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The external port SFX index. | ||||
| CsfpInfoPort | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.2 | DisplayString (SIZE (0..6)) | RO | |
column · DisplayString (SIZE (0..6)) · read-only · current External Port SFP/XFP alias. | ||||
| CsfpInfoDevice | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.3 | DisplayString (SIZE (0..6)) | RO | |
column · DisplayString (SIZE (0..6)) · read-only · current External Port SFP/XFP Device. | ||||
| CsfpInfoTXEnable | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current External Port SFP/XFP TX-Enable.
| ||||
| CsfpInfoRXSignal | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current External Port SFP/XFP RX-Signal.
| ||||
| CsfpInfoTXFault | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current External Port SFP/XFP TX-Fault.
| ||||
| CsfpInfoApproved | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current External Port SFP/XFP Approval.
| ||||
| CsfpInfoVendor | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.8 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current External Port SFP/XFP device vendor. | ||||
| CsfpInfoSerial | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.9 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current External Port SFP/XFP device serial. | ||||
| CsfpInfoPartNumber | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.10 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current External Port SFP/XFP device part number. | ||||
| CsfpInfoRevision | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.11 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current External Port SFP/XFP device revision. | ||||
| CsfpInfoVoltage | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.12 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current External Port SFP/XFP device voltage. | ||||
| CsfpInfoTemperature | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.13 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current External Port SFP/XFP device temperature. | ||||
| CsfpInfoWaveLength | 1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.14 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current External Port SFP/XFP device laser wave length. | ||||
| NagVMGroupInfo | 1.3.6.1.4.1.20301.2.7.15.1.3.12 | |||
| TvmGroupInfoTbl | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1 | NA | ||
table · not-accessible · current Virtual MAC information table | ||||
| RvmGroupInfolistEntry | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1 | NA | ||
| CvmGroupInfoIdx | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Table index, 1 based. | ||||
| CvmGroupInfoMac | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.2 | PhysAddress | RO | |
column · PhysAddress · read-only · current The virtual machine MAC address. | ||||
| CvmGroupInfoIP | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The virtual machine IP address. | ||||
| CvmGroupInfoPort | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.4 | PortNumber | RO | |
column · PortNumber · read-only · current System port connected to the virtual machine. | ||||
| CvmGroupInfoGroup | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The virtual machine group. | ||||
| CvmGroupInfoVlan | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The virtual machine VLAN | ||||
| CvmGroupInfoIsESXSvcCon | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Set to 1 if ESX Service Console Interface, else 0. | ||||
| CvmGroupInfoIsVMK | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Set to 1 if VM Kernel Interface, else 0. | ||||
| CvmGroupInfoName | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current Virtual Machine Name, if available. | ||||
| CvmGroupInfoUUID | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Virtual Machine UUID, if available. | ||||
| CvmGroupInfoVSwitch | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current Virtual Machine VSwitch, if available. | ||||
| CvmGroupInfoPortGroup | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current Virtual Machine Port Group, if available. | ||||
| CvmGroupInfoHost | 1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current Virtual Machine Host, if available. | ||||
| NaccessInfo | 1.3.6.1.4.1.20301.2.7.15.1.3.13 | |||
| SaccessInfoClearAllUserFailAttempts | 1.3.6.1.4.1.20301.2.7.15.1.3.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action Object. When set to clear(2),clears all the unsuccessful attempts of users. Otherwise nothing is done. ok(1) is returned always when read.
| ||||
| SaccessInfoClearAllUserLocks | 1.3.6.1.4.1.20301.2.7.15.1.3.13.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action Object. When set to clear(2), Unlock all locked users. Otherwise nothing is done. ok(1) is returned always when read.
| ||||
| TaccessUserInfoTable | 1.3.6.1.4.1.20301.2.7.15.1.3.13.3 | NA | ||
table · not-accessible · current The table of user information. | ||||
| RaccessUserInfoTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1 | NA | ||
| CaccessUserInfoIndex | 1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. The index value corresponds to the same value of agAccessUserCurCfgUId for the user. | ||||
| CaccessUserInfoLockState | 1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Lock State of a specific user, unlocked(1) or locked(2). When the state is locked the user is not allowed to login until the account is unlocked by the administrator.
| ||||
| CaccessUserInfoClearFailAttempts | 1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Action Object. When set to clear(2), clears the unsuccessful attempts of a particular user. Otherwise nothing is done. ok(1) is returned always when read.
| ||||
| CaccessUserInfoClearLock | 1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Action Object. When set to clear(2), unlock a particular user. Otherwise nothing is done. ok(1) is returned always when read.
| ||||
| NagentOper | 1.3.6.1.4.1.20301.2.7.15.1.4 | |||
| TagPortOperTable | 1.3.6.1.4.1.20301.2.7.15.1.4.1 | NA | ||
table · not-accessible · current The table of port operations. | ||||
| RagPortOperTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.4.1.1 | NA | ||
| CportOperIdx | 1.3.6.1.4.1.20301.2.7.15.1.4.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index. | ||||
| CportOperState | 1.3.6.1.4.1.20301.2.7.15.1.4.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable port.
| ||||
| CportOperRmon | 1.3.6.1.4.1.20301.2.7.15.1.4.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable RMON for port.
| ||||
| CportOperLearning | 1.3.6.1.4.1.20301.2.7.15.1.4.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable L2 (FDB) Learning for this port.
| ||||
| NagNTPOper | 1.3.6.1.4.1.20301.2.7.15.1.4.2 | |||
| SntpOperSendReq | 1.3.6.1.4.1.20301.2.7.15.1.4.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Allows the user to send requests to the NTP server.
| ||||
| TportOperDot1xTable | 1.3.6.1.4.1.20301.2.7.15.1.4.4 | NA | ||
table · not-accessible · current The table of port operations. | ||||
| RportOperDot1xTableEntry | 1.3.6.1.4.1.20301.2.7.15.1.4.4.1 | NA | ||
| CportOperDot1xIndx | 1.3.6.1.4.1.20301.2.7.15.1.4.4.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index. | ||||
| CportOperDot1xReset | 1.3.6.1.4.1.20301.2.7.15.1.4.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Reinitialize 802.1x access control on port.
| ||||
| CportOperDot1xReauth | 1.3.6.1.4.1.20301.2.7.15.1.4.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Initiate reauthentication on port.
| ||||
| NagSrvLedOper | 1.3.6.1.4.1.20301.2.7.15.1.4.5 | |||
| SsrvLedOper | 1.3.6.1.4.1.20301.2.7.15.1.4.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable Service Required LED.
| ||||
| Nlayer2 | 1.3.6.1.4.1.20301.2.7.15.2 | |||
| Nlayer2Configs | 1.3.6.1.4.1.20301.2.7.15.2.1 | |||
| Nvlan | 1.3.6.1.4.1.20301.2.7.15.2.1.1 | |||
| SvlanMaxEnt | 1.3.6.1.4.1.20301.2.7.15.2.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the VLAN configuration table. | ||||
| TvlanCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2 | NA | ||
table · not-accessible · current The table of VLAN configuration. | ||||
| RvlanCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1 | NA | ||
| CvlanCurCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier. | ||||
| CvlanCurCfgPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| CvlanCurCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable a VLAN
| ||||
| CvlanCurCfgStg | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The Spanning Tree Group for the VLAN. | ||||
| CvlanCurCfgVlanName | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.9 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The VLAN name. | ||||
| CvlanCurCfgPrVlanType | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the Private VLAN.
| ||||
| CvlanCurCfgPrVlanMapPriId | 1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The primary vlan id | ||||
| TvlanNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3 | NA | ||
table · not-accessible · current The table of VLAN configuration. | ||||
| RvlanNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1 | NA | ||
| CvlanNewCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier. | ||||
| CvlanNewCfgVlanName | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.2 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current The VLAN name. | ||||
| CvlanNewCfgPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| CvlanNewCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable a VLAN
| ||||
| CvlanNewCfgAddPort | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.5 | PortNumber | RC | |
column · PortNumber · read-create · current The port to be added to the specified VLAN. A '0' value is returned when read. | ||||
| CvlanNewCfgRemovePort | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.6 | PortNumber | RC | |
column · PortNumber · read-create · current The port to be removed from the specified VLAN. A '0' value is returned when read. | ||||
| CvlanNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
| ||||
| CvlanNewCfgStg | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current The Spanning Tree Group for the VLAN. | ||||
| CvlanNewCfgPrVlanType | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The type of the Private VLAN.
| ||||
| CvlanNewCfgPrVlanMapPriId | 1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current The primary vlan id. To delete set 0. | ||||
| SvlanMaxVlanID | 1.3.6.1.4.1.20301.2.7.15.2.1.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum allowed VLAN ID. | ||||
| TpvlanCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5 | NA | ||
table · not-accessible · current The table of PROTOCOL VLAN configuration. | ||||
| RpvlanCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1 | NA | ||
row · not-accessible · current A row in the Protocol VLAN configuration table. | ||||
| CpvlanCurCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier. | ||||
| CpvlanCurCfgPvlanId | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The PVLAN identifier. | ||||
| CpvlanCurCfgPvlanFrameType | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The frame type of the PVLAN.
| ||||
| CpvlanCurCfgPvlanEtherType | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The Ether type of the PVLAN. | ||||
| CpvlanCurCfgPvlanPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the PVLAN. The ports are presented in bitmap format. | ||||
| CpvlanCurCfgPvlanPrio | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The priority of the PVLAN. | ||||
| CpvlanCurCfgPvlanState | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable a PVLAN.
| ||||
| CpvlanCurCfgPvlanTagPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The list of tagged-PVLAN ports. The ports are presented in bitmap format. | ||||
| CpvlanCurCfgPvlanPredefProto | 1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current A predefined Protocol (setting EtherType and FrameType to predefined values).
| ||||
| TpvlanNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6 | NA | ||
table · not-accessible · current The table of PROTOCOL VLAN configuration. | ||||
| RpvlanNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1 | NA | ||
row · not-accessible · current A row in the Protocol VLAN configuration table. | ||||
| CpvlanNewCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier. | ||||
| CpvlanNewCfgPvlanId | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The PVLAN identifier. | ||||
| CpvlanNewCfgPvlanFrameType | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The frame type of the PVLAN.
| ||||
| CpvlanNewCfgPvlanEtherType | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current The Ehter type of the PVLAN. | ||||
| CpvlanNewCfgPvlanAddPort | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.5 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be added to the specified PVLAN. A '0' value is returned when read. | ||||
| CpvlanNewCfgPvlanRemovePort | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.6 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be removed to the specified PVLAN. A '0' value is returned when read. | ||||
| CpvlanNewCfgPvlanPrio | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The priority of the PVLAN. | ||||
| CpvlanNewCfgPvlanState | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable a PVLAN
| ||||
| CpvlanNewCfgPvlanTagPort | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.9 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be tagged for the specified PVLAN. A '0' value is returned when read. | ||||
| CpvlanNewCfgPvlanUntagPort | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.10 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be untagged for the specified PVLAN. A '0' value is returned when read. | ||||
| CpvlanNewCfgPvlanPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the PVLAN. The ports are presented in bitmap format. | ||||
| CpvlanNewCfgPvlanTagPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The list of tagged-PVLAN ports. The ports are presented in bitmap format. | ||||
| CpvlanNewCfgPvlanDelete | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Delete a PVLAN
| ||||
| CpvlanNewCfgPvlanPredefProto | 1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current A predefined Protocol (setting EtherType and FrameType to predefined values).
| ||||
| Ntrunkgroup | 1.3.6.1.4.1.20301.2.7.15.2.1.2 | |||
| StrunkGroupTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.2.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in trunk group table. | ||||
| TtrunkGroupCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.2.2 | NA | ||
table · not-accessible · current The table of trunk group configuration. | ||||
| RtrunkGroupCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.2.2.1 | NA | ||
row · not-accessible · current A row in the trunk group configuration table. | ||||
| CtrunkGroupCurCfgIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the trunk group. | ||||
| CtrunkGroupCurCfgPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.2.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group | ||||
| CtrunkGroupCurCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable a trunk group.
| ||||
| TtrunkGroupNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.2.3 | NA | ||
table · not-accessible · current The table of trunk group configuration. | ||||
| RtrunkGroupNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1 | NA | ||
row · not-accessible · current A row in the trunk group configuration table. | ||||
| CtrunkGroupNewCfgIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the trunk group. | ||||
| CtrunkGroupNewCfgPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group | ||||
| CtrunkGroupNewCfgAddPort | 1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.3 | PortNumber | RC | |
column · PortNumber · read-create · current The port to be added in the trunk group. When read, 0 is returned. | ||||
| CtrunkGroupNewCfgRemovePort | 1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.4 | PortNumber | RC | |
column · PortNumber · read-create · current The port to be deleted from the trunk group. when read, 0 is returned. | ||||
| CtrunkGroupNewCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable a trunk group.
| ||||
| CtrunkGroupNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
| ||||
| StrunkLacpGroupTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.2.1.2.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in LACP trunk group table. | ||||
| TtrunkLacpGroupCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.2.5 | NA | ||
table · not-accessible · current The table of LACP trunk group configuration. | ||||
| RtrunkLacpGroupCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.2.5.1 | NA | ||
row · not-accessible · current A row in the LACP trunk group configuration table. | ||||
| CtrunkLacpGroupCurCfgIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.2.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the LACP trunk group. | ||||
| CtrunkLacpGroupCurCfgAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.1.2.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The administrative key of the LACP trunk group. Ports whose LACP key is same will be member ports of the trunk. | ||||
| TtrunkLacpGroupNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.2.6 | NA | ||
table · not-accessible · current The table of LACP trunk group configuration. | ||||
| RtrunkLacpGroupNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.2.6.1 | NA | ||
row · not-accessible · current A row in the LACP trunk group configuration table. | ||||
| CtrunkLacpGroupNewCfgIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.2.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the LACP trunk group. | ||||
| CtrunkLacpGroupNewCfgAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.1.2.6.1.2 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The administrative key of the LACP trunk group. Ports whose LACP key is same will be member ports of the trunk. Value 0 means LACP trunk group deletion. | ||||
| NstgCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.3 | |||
| TstgCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1 | NA | ||
table · not-accessible · current The table of Spanning Tree Group configuration. | ||||
| RstgCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1 | NA | ||
row · not-accessible · current Information about a particular Spanning Tree Group configuration.
| ||||
| CstgCurCfgIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgCurCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
| ||||
| CstgCurCfgPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.5 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. | ||||
| CstgCurCfgBrgHelloTime | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.6 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current The value in seconds that all bridges use for HelloTime when this bridge is acting as the root. | ||||
| CstgCurCfgBrgForwardDelay | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.7 | INTEGER (4..30) | RO | |
column · INTEGER (4..30) · read-only · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| CstgCurCfgBrgMaxAge | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.8 | INTEGER (6..40) | RO | |
column · INTEGER (6..40) · read-only · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| CstgCurCfgVlanBmap | 1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.10 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| TstgNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2 | NA | ||
table · not-accessible · current The table of Spanning Tree Groups configuration in the new_config. | ||||
| RstgNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1 | NA | ||
row · not-accessible · current Information about a particular Spanning Tree Group configuration.
| ||||
| CstgNewCfgIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgNewCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
| ||||
| CstgNewCfgDefaultCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything.
| ||||
| CstgNewCfgAddVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read. | ||||
| CstgNewCfgRemoveVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read. | ||||
| CstgNewCfgPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.8 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. | ||||
| CstgNewCfgBrgHelloTime | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.9 | INTEGER (1..10) | RW | |
column · INTEGER (1..10) · read-write · current The value in seconds that all bridges use for HelloTime when this bridge is acting as the root. | ||||
| CstgNewCfgBrgForwardDelay | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.10 | INTEGER (4..30) | RW | |
column · INTEGER (4..30) · read-write · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| CstgNewCfgBrgMaxAge | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.11 | INTEGER (6..40) | RW | |
column · INTEGER (6..40) · read-write · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| CstgNewCfgVlanBmap | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.13 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| CstgNewCfgRemoveAllVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current The all vlans to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
| ||||
| TstgCurCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.2.1.3.3 | NA | ||
table · not-accessible · current The table of Spanning Tree Group port configuration in the current_config. | ||||
| RstgCurCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1 | NA | ||
row · not-accessible · current Information about port configuration of a particular Spanning Tree Group. | ||||
| CstgCurCfgStgIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgCurCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The port identifier of a particular Spanning Tree Group. | ||||
| CstgCurCfgPortState | 1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
| ||||
| CstgCurCfgPortPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.4 | INTEGER (0..240) | RO | |
column · INTEGER (0..240) · read-only · current The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. | ||||
| CstgCurCfgPortPathCost | 1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The contribution of this port to the path cost of paths towards the spanning tree root which include this port ( range is (0..200000000) ). | ||||
| TstgNewCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.2.1.3.4 | NA | ||
table · not-accessible · current The table of Spanning Tree Group port configuration in the new_config. | ||||
| RstgNewCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1 | NA | ||
row · not-accessible · current Information about port configuration of a particular Spanning Tree Group. | ||||
| CstgNewCfgStgIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgNewCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The port identifier of a particular Spanning Tree Group. | ||||
| CstgNewCfgPortState | 1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
| ||||
| CstgNewCfgPortPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.4 | INTEGER (0..240) | RC | |
column · INTEGER (0..240) · read-create · current The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. | ||||
| CstgNewCfgPortPathCost | 1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The contribution of this port to the path cost of paths towards the spanning tree root which include this port ( range is (0..200000000) ). | ||||
| Nmirroring | 1.3.6.1.4.1.20301.2.7.15.2.1.4 | |||
| NmirrPortMirr | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1 | |||
| SpmCurCfgPortMirrState | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of port-based port mirroring.
| ||||
| SpmNewCfgPortMirrState | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The state of port-based port mirroring.
| ||||
| TpmCurCfgPortMonitorTable | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3 | NA | ||
table · not-accessible · current The table of monitoring ports. | ||||
| RpmCurCfgPortMonitorEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3.1 | NA | ||
row · not-accessible · current A row in the monitoring port table. | ||||
| CpmCurCfgPmirrMoniPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The monitoring port number. | ||||
| CpmCurCfgPmirrMirrPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The mirrored port number | ||||
| CpmCurCfgPmirrDirection | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The type of traffic to be monitored with respect to the mirrored port.
| ||||
| TpmNewCfgPortMonitorTable | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4 | NA | ||
table · not-accessible · current The table of monitoring ports. | ||||
| RpmNewCfgPortMonitorEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1 | NA | ||
row · not-accessible · current A row in the monitoring port table. | ||||
| CpmNewCfgPmirrMoniPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The monitoring port number. | ||||
| CpmNewCfgPmirrMirrPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The mirrored port number | ||||
| CpmNewCfgPmirrDirection | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The type of traffic to be monitored with respect to the mirrored port.
| ||||
| CpmNewCfgPmirrDelete | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
| ||||
| CpmNewCfgPmonDelete | 1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned.
| ||||
| Nlacp | 1.3.6.1.4.1.20301.2.7.15.2.1.5 | |||
| SlacpCurSystemPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.5.1 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current A 2-octet read-write value indicating the priority value associated with the Actor's System ID. | ||||
| SlacpNewSystemPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.5.2 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current A 2-octet read-write value indicating the priority value associated with the Actor's System ID. | ||||
| SlacpCurSystemTimeoutTime | 1.3.6.1.4.1.20301.2.7.15.2.1.5.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
| ||||
| SlacpNewSystemTimeoutTime | 1.3.6.1.4.1.20301.2.7.15.2.1.5.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
| ||||
| TlacpCurPortCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.5.7 | NA | ||
table · not-accessible · current The table of LACP port configuration. | ||||
| RlacpCurPortCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1 | NA | ||
| ClacpCurPortCfgTableId | 1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current LACP port number. | ||||
| ClacpCurPortState | 1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
| ||||
| ClacpCurPortActorPortPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.3 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The priority value assigned to this Aggregation Port. This 16-bit value is read-only. | ||||
| ClacpCurPortActorAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance. | ||||
| ClacpCurPortActorMinLinks | 1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.5 | INTEGER (1..16) | RO | |
column · INTEGER (1..16) · read-only · current The current minimum links for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance. | ||||
| ClacpCurPortSuspendIndividual | 1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current It indicates if the port can be treated as an individual link when it does not get LACPDU from the peer port. suspend (can't be treated as a normal link) individual (can be treated as a normal link)
| ||||
| TlacpNewPortCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8 | NA | ||
table · not-accessible · current The table of LACP port configuration. | ||||
| RlacpNewPortCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1 | NA | ||
| ClacpNewPortCfgTableId | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current LACP port number. | ||||
| ClacpNewPortState | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
| ||||
| ClacpNewPortActorPortPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.3 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The priority value assigned to this Aggregation Port. This 16-bit value is read-write. | ||||
| ClacpNewPortActorAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.4 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance. | ||||
| ClacpNewPortActorMinLinks | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.5 | INTEGER (1..16) | RW | |
column · INTEGER (1..16) · read-write · current The current minimum links for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance. | ||||
| ClacpNewPortSetToDefault | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current When read, always returns none(1). When setting setDefault(2) value, the LACP port settings are set to the default values.
| ||||
| ClacpNewPortSuspendIndividual | 1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current It indicates if the port can be treated as an individual link when it does not get LACPDU from the peer port. suspend (can't be treated as a normal link) individual (can be treated as a normal link)
| ||||
| SlacpDeleteTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.5.9 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Delete a trunk with specified admin key | ||||
| SlacpNewSystemSetToDefault | 1.3.6.1.4.1.20301.2.7.15.2.1.5.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current When read, always returns none(1). When setting setDefault(2) value, the LACP system settings are set to the default values.
| ||||
| Nthash | 1.3.6.1.4.1.20301.2.7.15.2.1.6 | |||
| NthashL2L3 | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1 | |||
| Sl2ThashCurCfgSmacState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable smac hash for traffic.
| ||||
| Sl2ThashNewCfgSmacState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable smac hash for traffic.
| ||||
| Sl2ThashCurCfgDmacState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable dmac hash for traffic.
| ||||
| Sl2ThashNewCfgDmacState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable dmac hash for traffic.
| ||||
| Sl3ThashCurCfgIpUseL2State | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable L2 hash for IP traffic.
| ||||
| Sl3ThashNewCfgIpUseL2State | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable L2 hash for IP traffic.
| ||||
| Sl3ThashCurCfgSipState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable sip hash for IP traffic.
| ||||
| Sl3ThashNewCfgSipState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable sip hash for IP traffic.
| ||||
| Sl3ThashCurCfgDipState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable dip hash for IP traffic.
| ||||
| Sl3ThashNewCfgDipState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable dip hash for IP traffic.
| ||||
| Sl2ThashCurCfgIngressState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable ingres port hash.
| ||||
| Sl2ThashNewCfgIngressState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable ingres port hash.
| ||||
| Sl3ThashCurCfgL4PortState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable L4 port hash.
| ||||
| Sl3ThashNewCfgL4PortState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.1.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable L4 port hash.
| ||||
| NthashFcoe | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2 | |||
| SfcoeThashCurCfgSourceState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable fcoe source-id hash.
| ||||
| SfcoeThashNewCfgSourceState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable fcoe source-id hash.
| ||||
| SfcoeThashCurCfgDestinationState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable fcoe destination-id hash.
| ||||
| SfcoeThashNewCfgDestinationState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable fcoe destination-id hash.
| ||||
| SfcoeThashCurCfgCntagState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable fcoe cntag-id hash.
| ||||
| SfcoeThashNewCfgCntagState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable fcoe cntag-id hash.
| ||||
| SfcoeThashCurCfgOriginatorState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable fcoe originator-id hash.
| ||||
| SfcoeThashNewCfgOriginatorState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable fcoe originator-id hash.
| ||||
| SfcoeThashCurCfgResponderState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable fcoe responder-id hash.
| ||||
| SfcoeThashNewCfgResponderState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable fcoe responder-id hash.
| ||||
| SfcoeThashCurCfgFabricState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable fcoe fabric-id hash.
| ||||
| SfcoeThashNewCfgFabricState | 1.3.6.1.4.1.20301.2.7.15.2.1.6.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable fcoe fabric-id hash.
| ||||
| NmstCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.7 | |||
| NmstGeneralCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1 | |||
| SmstCurCfgRegionName | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1.3 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Name for the Region's configuration. | ||||
| SmstNewCfgRegionName | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1.4 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The Name for the Region's configuration. | ||||
| SmstCurCfgRegionRevision | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1.5 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current Revision of the MST Region. | ||||
| SmstNewCfgRegionRevision | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1.6 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current Revision of the MST Region. | ||||
| SmstCurCfgMaxHopCount | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1.7 | INTEGER (4..60) | RO | |
scalar · INTEGER (4..60) · read-only · current Indicates the maximum hop count value. | ||||
| SmstNewCfgMaxHopCount | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1.8 | INTEGER (4..60) | RW | |
scalar · INTEGER (4..60) · read-write · current Indicates the maximum hop count value. | ||||
| SmstCurCfgStpMode | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The version of Spanning Tree Protocal the bridge is currently running.
| ||||
| SmstNewCfgStpMode | 1.3.6.1.4.1.20301.2.7.15.2.1.7.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The version of Spanning Tree Protocal the bridge is currently running.
| ||||
| NmstCistCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2 | |||
| SmstCistDefaultCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not mean anything.
| ||||
| NmstCistBridgeCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2 | |||
| SmstCistCurCfgBridgePriority | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.1 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current The value of the writable portion of the Brigde Identifier comprising of the first two octets. | ||||
| SmstCistNewCfgBridgePriority | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.2 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The value of the writable portion of the Brigde Identifier comprising of the first two octets. | ||||
| SmstCistCurCfgBridgeMaxAge | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.5 | INTEGER (6..40) | RO | |
scalar · INTEGER (6..40) · read-only · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| SmstCistNewCfgBridgeMaxAge | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.6 | INTEGER (6..40) | RW | |
scalar · INTEGER (6..40) · read-write · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| SmstCistCurCfgBridgeForwardDelay | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.7 | INTEGER (4..30) | RO | |
scalar · INTEGER (4..30) · read-only · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| SmstCistNewCfgBridgeForwardDelay | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.8 | INTEGER (4..30) | RW | |
scalar · INTEGER (4..30) · read-write · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| SmstCistCurCfgVlanBmap | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.9 | OCTET STRING (SIZE (0..512)) | RO | |
scalar · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group | ||||
| SmstCistNewCfgVlanBmap | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.10 | OCTET STRING (SIZE (0..512)) | RO | |
scalar · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group | ||||
| SmstCistNewCfgAddVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.11 | Integer32 | RC | |
scalar · Integer32 · read-create · current The vlan to be added to the CIST Group. A '0' value is returned when read. | ||||
| TmstCistCurCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3 | NA | ||
table · not-accessible · current The table of CIST Port configuration. | ||||
| RmstCistCurCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1 | NA | ||
row · not-accessible · current Information about a particular CIST Port configuration. | ||||
| CmstCistCurCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number of the port for which this entry contains spanning tree configuration. | ||||
| CmstCistCurCfgPortPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.2 | INTEGER (0..240) | RO | |
column · INTEGER (0..240) · read-only · current The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value. | ||||
| CmstCistCurCfgPortPathCost | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.3 | INTEGER (0..200000000) | RO | |
column · INTEGER (0..200000000) · read-only · current The contribution of this port to the path cost of paths towards the CIST Root which include this port. | ||||
| CmstCistCurCfgPortLinkType | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. (for MSTP only)
| ||||
| CmstCistCurCfgPortEdge | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The value of the Edge Port parameter. (for MSTP only)
| ||||
| CmstCistCurCfgPortStpState | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Turn port's Spanning Tree on/off.
| ||||
| CmstCistCurCfgPortHelloTime | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.7 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current The amount of time between the transmission of Configuration Port PDUs in seconds. | ||||
| CmstCistCurCfgPortPvstProtection | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The value of the PVST Protection parameter.
| ||||
| TmstCistNewCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4 | NA | ||
table · not-accessible · current The table of CIST Port configuration. | ||||
| RmstCistNewCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1 | NA | ||
row · not-accessible · current Information about a particular CIST Port configuration. | ||||
| CmstCistNewCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number of the port for which this entry contains spanning tree configuration. | ||||
| CmstCistNewCfgPortPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.2 | INTEGER (0..240) | RW | |
column · INTEGER (0..240) · read-write · current The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value. | ||||
| CmstCistNewCfgPortPathCost | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.3 | INTEGER (0..200000000) | RW | |
column · INTEGER (0..200000000) · read-write · current The contribution of this port to the path cost of paths towards the CIST Root which include this port. | ||||
| CmstCistNewCfgPortStpState | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Turn port's Spanning Tree on/off.
| ||||
| CmstCistNewCfgPortHelloTime | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.7 | INTEGER (1..10) | RW | |
column · INTEGER (1..10) · read-write · current The amount of time between the transmission of Configuration Port PDUs in seconds. | ||||
| CmstCistNewCfgPortPvstProtection | 1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The value of the PVST Protection parameter.
| ||||
| Nl2GeneralCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.8 | |||
| SpvstCompatibilityCurCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.8.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable PVST+ compatibility
| ||||
| SpvstCompatibilityNewCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.8.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable PVST+ compatibility
| ||||
| SnostpCurCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.8.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current STP Mode Disable global state.
| ||||
| SnostpNewCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.8.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable STP Mode Disable.
| ||||
| SstpLoopGuardCurCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.8.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current STP loop guard global state.
| ||||
| SstpLoopGuardNewCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.8.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable STP loop guard.
| ||||
| SvlanAutoStgCurCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.8.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current VLAN automatic STG assignment global state.
| ||||
| SvlanAutoStgNewCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.8.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VLAN automatic STG assignment.
| ||||
| NfailoverCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.10 | |||
| SfailoverCurCfgOnState | 1.3.6.1.4.1.20301.2.7.15.2.1.10.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Failover ON/OFF setting.
| ||||
| SfailoverNewCfgOnState | 1.3.6.1.4.1.20301.2.7.15.2.1.10.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Failover ON/OFF settings.
| ||||
| SfailoverMaxTriggerEntries | 1.3.6.1.4.1.20301.2.7.15.2.1.10.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in the Failover Trigger Table. | ||||
| TfailoverCurCfgTriggerTable | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6 | NA | ||
table · not-accessible · current The Failover Trigger Table. | ||||
| RfailoverCurCfgTriggerTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1 | NA | ||
| CfailoverCurCfgTriggerId | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Trigger identifier. | ||||
| CfailoverCurCfgTriggerState | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable Trigger state
| ||||
| CfailoverCurCfgTriggerLimit | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Limit # of operational links | ||||
| CfailoverCurCfgTriggerMmonPort | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Manual Monitor port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Monitor
0 - The represented port does not belong to the Manual Monitor | ||||
| CfailoverCurCfgTriggerMmonTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Manual Monitor trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Monitor
0 - The represented trunk does not belong to the Manual Monitor | ||||
| CfailoverCurCfgTriggerMmonKey | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The LACP admin key. This is an array of 16-bit read-only values. | ||||
| CfailoverCurCfgTriggerMconPort | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Manual Control port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Control
0 - The represented port does not belong to the Manual Control | ||||
| CfailoverCurCfgTriggerMconTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Manual Control trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Control
0 - The represented trunk does not belong to the Manual Control | ||||
| CfailoverCurCfgTriggerMconKey | 1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The LACP admin key. This is an array of 16-bit read-only values. | ||||
| TfailoverNewCfgTriggerTable | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7 | NA | ||
table · not-accessible · current The Failover Trigger Table. | ||||
| RfailoverNewCfgTriggerTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1 | NA | ||
| CfailoverNewCfgTriggerId | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Trigger identifier. | ||||
| CfailoverNewCfgTriggerState | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable Trigger state
| ||||
| CfailoverNewCfgTriggerLimit | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.3 | INTEGER (0..1024) | RW | |
column · INTEGER (0..1024) · read-write · current Limit # of operational links | ||||
| CfailoverNewCfgTriggerMmonPort | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Manual Monitor port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Monitor
0 - The represented port does not belong to the Manual Monitor | ||||
| CfailoverNewCfgTriggerMmonPortAdd | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.11 | PortNumber | RC | |
column · PortNumber · read-create · current Add port to Manual Monitor. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMmonPortRem | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.12 | PortNumber | RC | |
column · PortNumber · read-create · current Remove port from Manual Monitor. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMmonTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Manual Monitor trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Monitor
0 - The represented trunk does not belong to the Manual Monitor | ||||
| CfailoverNewCfgTriggerMmonTrunkAdd | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Add trunk to Manual Monitor. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMmonTrunkRem | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Remove trunk from Manual Monitor. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMmonKey | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.16 | DisplayString | RO | |
column · DisplayString · read-only · current The LACP admin key. This is an array of 16-bit read-only values. | ||||
| CfailoverNewCfgTriggerMmonKeyAdd | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.17 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Add LACP admin key to Manual Monitor. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMmonKeyRem | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.18 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Remove LACP admin key from Manual Monitor. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMconPort | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.19 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Manual Control port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Control
0 - The represented port does not belong to the Manual Control | ||||
| CfailoverNewCfgTriggerMconPortAdd | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.20 | PortNumber | RC | |
column · PortNumber · read-create · current Add port to Manual Control. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMconPortRem | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.21 | PortNumber | RC | |
column · PortNumber · read-create · current Remove port from Manual Control. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMconTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.25 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Manual Control trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Control
0 - The represented trunk does not belong to the Manual Control | ||||
| CfailoverNewCfgTriggerMconTrunkAdd | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.26 | INTEGER | RC | |
column · INTEGER · read-create · current Add trunk to Manual Control. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMconTrunkRem | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.27 | INTEGER | RC | |
column · INTEGER · read-create · current Remove trunk from Manual Control. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMconKey | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.28 | DisplayString | RO | |
column · DisplayString · read-only · current The LACP admin key. This is an array of 16-bit read-only values. | ||||
| CfailoverNewCfgTriggerMconKeyAdd | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.29 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Add LACP admin key to Manual Control. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerMconKeyRem | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.30 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Remove LACP admin key from Manual Control. When read, 0 is returned. | ||||
| CfailoverNewCfgTriggerDelete | 1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.31 | INTEGER | RC | |
column · INTEGER · read-create · current Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
| ||||
| Ndot1x | 1.3.6.1.4.1.20301.2.7.15.2.1.12 | |||
| Sdot1xCurStatus | 1.3.6.1.4.1.20301.2.7.15.2.1.12.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Dot1x status
| ||||
| Sdot1xNewStatus | 1.3.6.1.4.1.20301.2.7.15.2.1.12.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Dot1x status
| ||||
| Tdot1xCurCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3 | NA | ||
table · not-accessible · current The table of 8021x configuration in the Current_config. | ||||
| Rdot1xCurCfgPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1 | NA | ||
| Cdot1xCurCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The 8021x Port number for which the table is related. | ||||
| Cdot1xCurCfgPortMode | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Port authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)
| ||||
| Cdot1xCurCfgPortQtPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.3 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current Quiet period (0-65535) | ||||
| Cdot1xCurCfgPortTxPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Tx Period | ||||
| Cdot1xCurCfgPortSupTmout | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Supplicant timeout (1..65535) | ||||
| Cdot1xCurCfgPortSrvTmout | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Server timeout (1..65535) | ||||
| Cdot1xCurCfgPortMaxRq | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.7 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current Maximum numer of requests (1..10) | ||||
| Cdot1xCurCfgPortRaPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.8 | INTEGER (0..604800) | RO | |
column · INTEGER (0..604800) · read-only · current Reautentication period (0..604800) | ||||
| Cdot1xCurCfgPortReAuth | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current ReAuthentication state
off(0),
on(1)
| ||||
| Cdot1xCurCfgPortVlanAssign | 1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Vlan assignment state
off(0),
on(1)
| ||||
| Tdot1xNewCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4 | NA | ||
table · not-accessible · current The table of 8021x configuration in the new_config. | ||||
| Rdot1xNewCfgPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1 | NA | ||
| Cdot1xNewCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The 8021x Port number for which the table is related. | ||||
| Cdot1xNewCfgPortMode | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Port authentication mode
forceUnauth(0),
auto(1),
forceAuth(2)
| ||||
| Cdot1xNewCfgPortQtPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.3 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current Quiet period (0..65535) | ||||
| Cdot1xNewCfgPortTxPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.4 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Tx Period (1..65535) | ||||
| Cdot1xNewCfgPortSupTmout | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.5 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Supplicant Timeout (1..65535) | ||||
| Cdot1xNewCfgPortSrvTmout | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.6 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Server Timeout (1..65535) | ||||
| Cdot1xNewCfgPortMaxRq | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.7 | INTEGER (1..10) | RC | |
column · INTEGER (1..10) · read-create · current Maximum number of requests (1..10) | ||||
| Cdot1xNewCfgPortRaPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.8 | INTEGER (1..604800) | RC | |
column · INTEGER (1..604800) · read-create · current Reauthentication period (1..604800) | ||||
| Cdot1xNewCfgPortReAuth | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Reauthentication state
off(0),
on(1)
| ||||
| Cdot1xNewCfgPortDefault | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Port default settings
| ||||
| Cdot1xNewCfgPortApplyGlobal | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Apply Global config
| ||||
| Cdot1xNewCfgPortVlanAssign | 1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/Disable the assignment of vlan from radius server when the
port is successfully autheticated.
Vlan assignment state
off(0),
on(1)
| ||||
| Ndot1xCurCfgGlobalTable | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5 | |||
| Ndot1xCurCfgGuestVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.1 | |||
| Sdot1xCurCfgGuestVlanNumber | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.1.1 | INTEGER (1..4094) | RO | |
scalar · INTEGER (1..4094) · read-only · current 8021.x Guest VLAN number | ||||
| Sdot1xCurCfgGuestVlanStatus | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current 8021.x Guest VLAN status enabled(1), disabled(2)
| ||||
| Sdot1xCurCfgGlobalMode | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Autehtication Mode
forceUnauth(0),
auto(1),
forceAuth(2)
| ||||
| Sdot1xCurCfgGlobalQtPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.4 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current Quiet period (0..65535) | ||||
| Sdot1xCurCfgGlobalTxPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.5 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current Tx period (1..65535) | ||||
| Sdot1xCurCfgGlobalSupTmout | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.6 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current Supplicant timeout (1..65535) | ||||
| Sdot1xCurCfgGlobalSrvTmout | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.7 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current Server timeout (1..65535) | ||||
| Sdot1xCurCfgGlobalMaxRq | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.8 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current Maximum number of requests (1..10) | ||||
| Sdot1xCurCfgGlobalRaPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.9 | INTEGER (0..604800) | RO | |
scalar · INTEGER (0..604800) · read-only · current Reauthentication period (0..604800) | ||||
| Sdot1xCurCfgGlobalReAuth | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| Sdot1xCurCfgGlobalVlanAssign | 1.3.6.1.4.1.20301.2.7.15.2.1.12.5.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current Vlan assignment status
| ||||
| Ndot1xNewCfgGlobalTable | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6 | |||
| Ndot1xNewCfgGuestVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.1 | |||
| Sdot1xNewCfgGuestVlanNumber | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.1.1 | INTEGER (0..4094) | RW | |
scalar · INTEGER (0..4094) · read-write · current 8021.x Guest VLAN number | ||||
| Sdot1xNewCfgGuestVlanStatus | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current 8021.x Guest VLAN status enabled(1), disabled(2)
| ||||
| Sdot1xNewCfgGlobalMode | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.3 | INTEGER | RC | |
scalar · INTEGER · read-create · current Authentication Mode
| ||||
| Sdot1xNewCfgGlobalQtPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.4 | INTEGER (0..65535) | RC | |
scalar · INTEGER (0..65535) · read-create · current Quiet Period (0..65535) | ||||
| Sdot1xNewCfgGlobalTxPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.5 | INTEGER (1..65535) | RC | |
scalar · INTEGER (1..65535) · read-create · current Tx Period (1..65535) | ||||
| Sdot1xNewCfgGlobalSupTmout | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.6 | INTEGER (1..65535) | RC | |
scalar · INTEGER (1..65535) · read-create · current Supplicand timeout (1..65535) | ||||
| Sdot1xNewCfgGlobalSrvTmout | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.7 | INTEGER (1..65535) | RC | |
scalar · INTEGER (1..65535) · read-create · current Server timeout (1..65535) | ||||
| Sdot1xNewCfgGlobalMaxRq | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.8 | INTEGER (1..10) | RC | |
scalar · INTEGER (1..10) · read-create · current Maximum number of requests (1..10) | ||||
| Sdot1xNewCfgGlobalRaPeriod | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.9 | INTEGER (1..604800) | RC | |
scalar · INTEGER (1..604800) · read-create · current Reauthentication period (1..604800) | ||||
| Sdot1xNewCfgGlobalReAuth | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.10 | INTEGER | RC | |
scalar · INTEGER · read-create · current Reauthentication status
| ||||
| Sdot1xNewCfgGlobalDefault | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.11 | INTEGER | RC | |
scalar · INTEGER · read-create · current Restore default 802.1x configuration
| ||||
| Sdot1xNewCfgGlobalVlanAssign | 1.3.6.1.4.1.20301.2.7.15.2.1.12.6.12 | INTEGER | RC | |
scalar · INTEGER · read-create · current Enable/Disable the assignment of vlan from radius server when the port is successfully autheticated.
| ||||
| Nfdb | 1.3.6.1.4.1.20301.2.7.15.2.1.13 | |||
| NfdbGeneralCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.13.1 | |||
| SfdbCurCfgAgingTime | 1.3.6.1.4.1.20301.2.7.15.2.1.13.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Fdb current aging time | ||||
| SfdbNewCfgAgingTime | 1.3.6.1.4.1.20301.2.7.15.2.1.13.1.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Fdb new aging time. | ||||
| TfdbCurCfgStaticTable | 1.3.6.1.4.1.20301.2.7.15.2.1.13.2 | NA | ||
table · not-accessible · current The table of FDB static entries. | ||||
| RfdbCurCfgStaticEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1 | NA | ||
| CfdbCurCfgEntryIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The fdb entry index | ||||
| CfdbCurCfgVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Add vlan for fdb entry index | ||||
| CfdbCurCfgPort | 1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.3 | PortNumber | RO | |
column · PortNumber · read-only · current The MAC address port number. | ||||
| CfdbCurCfgMac | 1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.4 | PhysAddress | RO | |
column · PhysAddress · read-only · current Add a fdb entry. | ||||
| CfdbCurCfgTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The MAC address trunk number. | ||||
| CfdbCurCfgAdminkey | 1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The MAC address LACP trunk adminkey. | ||||
| TfdbNewCfgStaticTable | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3 | NA | ||
table · not-accessible · current The table of FDB static entries. | ||||
| RfdbNewCfgStaticEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1 | NA | ||
| CfdbNewCfgEntryIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The fdb entry index | ||||
| CfdbNewCfgAddVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Add vlan for fdb entry index | ||||
| CfdbNewCfgAddPort | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.3 | PortNumber | RC | |
column · PortNumber · read-create · current The MAC address port number. | ||||
| CfdbNewCfgAddMac | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.4 | PhysAddress | RC | |
column · PhysAddress · read-create · current Add a fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05 | ||||
| CfdbNewCfgDelStaticEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CfdbNewCfgAddTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The MAC address trunk number. | ||||
| CfdbNewCfgAddAdminkey | 1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current The MAC address LACP trunk adminkey. | ||||
| TmcastFdbCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.13.8 | NA | ||
table · not-accessible · current The table of multicast FDB static entries. | ||||
| RmcastFdbCurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1 | NA | ||
| CmcastFdbCurCfgEntryIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The multicast fdb entry index | ||||
| CmcastFdbCurCfgVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Add vlan for multicast fdb entry index | ||||
| CmcastFdbCurCfgPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1.3 | PortNumber | RO | |
column · PortNumber · read-only · current The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address. | ||||
| CmcastFdbCurCfgMac | 1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1.4 | MacAddress | RO | |
column · MacAddress · read-only · current Add a multicast fdb entry. | ||||
| TmcastFdbNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9 | NA | ||
table · not-accessible · current The table of multicast FDB static entries. | ||||
| RmcastFdbNewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1 | NA | ||
| CmcastFdbNewCfgEntryIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The multicast fdb entry index | ||||
| CmcastFdbNewCfgAddVlan | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Add vlan for multicast fdb entry index | ||||
| CmcastFdbNewCfgPorts | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address. | ||||
| CmcastFdbNewCfgAddPort | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.4 | PortNumber | RC | |
column · PortNumber · read-create · current The multicast MAC address port number to be added. A '0' value is returned when read. | ||||
| CmcastFdbNewCfgRemPort | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.5 | PortNumber | RC | |
column · PortNumber · read-create · current The multicast MAC address port number to be removed. A '0' value is returned when read. | ||||
| CmcastFdbNewCfgAddMac | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.6 | MacAddress | RC | |
column · MacAddress · read-create · current Add a multicast fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05 | ||||
| CmcastFdbNewCfgDelStaticEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| NhotlinksCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.14 | |||
| ShotlinksCurCfgOnState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Hot Links ON/OFF setting.
| ||||
| ShotlinksNewCfgOnState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Hot Links ON/OFF settings.
| ||||
| ShotlinksCurCfgFdbUpdateState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable Hot Links FDB Update setting.
| ||||
| ShotlinksNewCfgFdbUpdateState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable Hot Links FDB Update setting.
| ||||
| ShotlinksMaxTriggerEntries | 1.3.6.1.4.1.20301.2.7.15.2.1.14.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in the Hot Links Trigger Table. | ||||
| ThotlinksCurCfgTriggerTable | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6 | NA | ||
table · not-accessible · current The Hot Links Trigger Table. | ||||
| RhotlinksCurCfgTriggerTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1 | NA | ||
| ChotlinksCurCfgTriggerId | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Trigger identifier. | ||||
| ChotlinksCurCfgTriggerName | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current A textual string containing the trigger name. | ||||
| ChotlinksCurCfgTriggerState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable Trigger state.
| ||||
| ChotlinksCurCfgTriggerPreemptState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable Preemption state.
| ||||
| ChotlinksCurCfgTriggerFdelay | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Forward Delay setting (in secs). | ||||
| ChotlinksCurCfgTriggerMasterPort | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The master interface port number. | ||||
| ChotlinksCurCfgTriggerMasterTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The master interface trunk number. | ||||
| ChotlinksCurCfgTriggerBackupPort | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The backup interface port number. | ||||
| ChotlinksCurCfgTriggerBackupTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The backup interface trunk number. | ||||
| ChotlinksCurCfgTriggerDelete | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Delete a Hot Links trigger configuration.
| ||||
| ChotlinksCurCfgTriggerMasterAdminkey | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The master interface admin key number. | ||||
| ChotlinksCurCfgTriggerBackupAdminkey | 1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The backup interface admin key number. | ||||
| ThotlinksNewCfgTriggerTable | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7 | NA | ||
table · not-accessible · current The Hot Links Trigger Table. | ||||
| RhotlinksNewCfgTriggerTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1 | NA | ||
| ChotlinksNewCfgTriggerId | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Trigger identifier. | ||||
| ChotlinksNewCfgTriggerName | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.2 | DisplayString (SIZE (0..33)) | RW | |
column · DisplayString (SIZE (0..33)) · read-write · current A textual string containing the trigger name. | ||||
| ChotlinksNewCfgTriggerState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable Trigger state.
| ||||
| ChotlinksNewCfgTriggerPreemptState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable Preemption state.
| ||||
| ChotlinksNewCfgTriggerFdelay | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Forward Delay setting (in secs). | ||||
| ChotlinksNewCfgTriggerMasterPort | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The master interface port number. | ||||
| ChotlinksNewCfgTriggerMasterTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current The master interface trunk number. | ||||
| ChotlinksNewCfgTriggerBackupPort | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current The backup interface port number. | ||||
| ChotlinksNewCfgTriggerBackupTrunk | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current The backup interface trunk number. | ||||
| ChotlinksNewCfgTriggerDelete | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Delete a Hot Links trigger configuration.
| ||||
| ChotlinksNewCfgTriggerMasterAdminkey | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current The master interface admin key number. | ||||
| ChotlinksNewCfgTriggerBackupAdminkey | 1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.12 | Integer32 | RW | |
column · Integer32 · read-write · current The backup interface admin key number. | ||||
| ShotlinksCurCfgBpduState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable Hot Links BPDU flood setting.
| ||||
| ShotlinksNewCfgBpduState | 1.3.6.1.4.1.20301.2.7.15.2.1.14.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable Hot Links BPDU flood setting.
| ||||
| ShotlinksCurCfgFdbUpdateRate | 1.3.6.1.4.1.20301.2.7.15.2.1.14.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current Hot Links FDB update rate (packets per second). | ||||
| ShotlinksNewCfgFdbUpdateRate | 1.3.6.1.4.1.20301.2.7.15.2.1.14.11 | Integer32 | RW | |
scalar · Integer32 · read-write · current Hot Links FDB update rate (packets per second). | ||||
| NlldpCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.15 | |||
| SlldpPortTableMaxEnt | 1.3.6.1.4.1.20301.2.7.15.2.1.15.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of rows in the port configuration host table. | ||||
| TlldpCurCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2 | NA | ||
table · not-accessible · current The table of LLDP port configuration in the current_configuration block. | ||||
| RlldpCurCfgPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1 | NA | ||
row · not-accessible · current A row in the LLDP port configuration table in the current_configuration block.
| ||||
| ClldpCurCfgPortIndx | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in LLDP port configurations table. | ||||
| ClldpCurCfgPortAdmStat | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This is the admin status of the LLDP port.
| ||||
| ClldpCurCfgPortSnmpTrap | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This is the SNMP trap notification state of the LLDP port.
| ||||
| ClldpCurCfgPortportdesctlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Port Description TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortsysnametlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This is the System Name TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortsysdescrtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This is the System Description TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortsyscaptlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This is the System Capabilities TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortmgmtaddrtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Management Address TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortportvidtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Port VLAN ID TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortportprottlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Port and Protocol VLAN ID TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortvlannametlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This is the VLAN Name TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortprotidtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Protocol Identity TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortmacphytlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortpowermditlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Power Via MDI TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortlinkaggrtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Link Aggregation TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortframesztlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Maximum Frame Size TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortdcbxtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current This is the DCBX TLV state of the LLDP port.
| ||||
| ClldpCurCfgPortevbtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current This is the EVB TLV state of the LLDP port.
| ||||
| TlldpNewCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3 | NA | ||
table · not-accessible · current The table of LLDP port configuration in the new_configuration block. | ||||
| RlldpNewCfgPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1 | NA | ||
row · not-accessible · current A row in the LLDP port configuration table in the new_configuration block.
| ||||
| ClldpNewCfgPortIndx | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in LLDP port configurations table. | ||||
| ClldpNewCfgPortAdmStat | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This is the admin status of the LLDP port.
| ||||
| ClldpNewCfgPortSnmpTrap | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This is the SNMP trap notification state of the LLDP port
| ||||
| ClldpNewCfgPortportdesctlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This is the Port Description TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortsysnametlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This is the System Name TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortsysdescrtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This is the System Description TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortsyscaptlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This is the System Capabilities TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortmgmtaddrtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This is the Management Address TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortportvidtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This is the Port VLAN ID TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortportprottlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This is the Port and Protocol VLAN ID TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortvlannametlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This is the VLAN Name TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortprotidtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This is the Protocol Identity TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortmacphytlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortpowermditlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This is the Power Via MDI TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortlinkaggrtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current This is the Link Aggregation TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortframesztlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This is the Maximum Frame Size TLV state of the LLDP port.
| ||||
| ClldpNewCfgPortalltlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Set the corresponding state for all the LLDP port's TLVs. other(3) is returned when the object is read.
| ||||
| ClldpNewCfgPortdcbxtlv | 1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current This is the DCBX TLV state of the LLDP port.
| ||||
| NlldpGeneral | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4 | |||
| SlldpCurCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current LLDP global state.
| ||||
| SlldpNewCfgState | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn LLDP on or off.
| ||||
| SlldpCurCfgMsgTxInt | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.3 | INTEGER (5..32768) | RO | |
scalar · INTEGER (5..32768) · read-only · current LLDP message transmission interval for LLDPDU. | ||||
| SlldpNewCfgMsgTxInt | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.4 | INTEGER (5..32768) | RW | |
scalar · INTEGER (5..32768) · read-write · current LLDP message transmission interval for LLDPDU. | ||||
| SlldpCurCfgMsgTxHld | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.5 | INTEGER (2..10) | RO | |
scalar · INTEGER (2..10) · read-only · current LLDP message transmission holdtime-multiplier. | ||||
| SlldpNewCfgMsgTxHld | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.6 | INTEGER (2..10) | RW | |
scalar · INTEGER (2..10) · read-write · current LLDP message transmission holdtime-multiplier. | ||||
| SlldpCurCfgNotifInt | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.7 | INTEGER (1..3600) | RO | |
scalar · INTEGER (1..3600) · read-only · current LLDP minimum SNMP trap notification interval. | ||||
| SlldpNewCfgNotifInt | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.8 | INTEGER (1..3600) | RW | |
scalar · INTEGER (1..3600) · read-write · current LLDP minimum SNMP trap notification interval. | ||||
| SlldpCurCfgTxDelay | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.9 | INTEGER (1..8192) | RO | |
scalar · INTEGER (1..8192) · read-only · current LLDP delay interval between advertisements. | ||||
| SlldpNewCfgTxDelay | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.10 | INTEGER (1..8192) | RW | |
scalar · INTEGER (1..8192) · read-write · current LLDP delay interval between advertisements. | ||||
| SlldpCurCfgReinitDelay | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.11 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current LLDP reinit delay interval. | ||||
| SlldpNewCfgReinitDelay | 1.3.6.1.4.1.20301.2.7.15.2.1.15.4.12 | INTEGER (1..10) | RW | |
scalar · INTEGER (1..10) · read-write · current LLDP reinit delay interval. | ||||
| NvlagCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.18 | |||
| NvlagIslCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.18.1 | |||
| SvlagCurIslCfgPortChannel | 1.3.6.1.4.1.20301.2.7.15.2.1.18.1.1 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current Current vLAG ISL portchannel | ||||
| SvlagNewIslCfgPortChannel | 1.3.6.1.4.1.20301.2.7.15.2.1.18.1.2 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current This object is used to change the vLAG ISL portchannel. | ||||
| SvlagCurIslCfgAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.1.18.1.3 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current Current vLAG ISL admin key. | ||||
| SvlagNewIslCfgAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.1.18.1.4 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current This object is used to change the vLAG ISL admin key. | ||||
| SvlagCurCfgSwitchPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.18.4 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current Current vLAG switch priority | ||||
| SvlagNewCfgSwitchPriority | 1.3.6.1.4.1.20301.2.7.15.2.1.18.5 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current This object is used to change the vLAG priority of this switch. | ||||
| TvlagCurCfgTrunkTable | 1.3.6.1.4.1.20301.2.7.15.2.1.18.6 | NA | ||
table · not-accessible · current A table of objects of the vLAG groups configured in this switch. | ||||
| RvlagCurCfgTrunkTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.18.6.1 | NA | ||
| CvlagCurCfgTrunkIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.18.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the trunk group. | ||||
| CvlagCurCfgTrunkState | 1.3.6.1.4.1.20301.2.7.15.2.1.18.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current administrative state of the vLAG group.
| ||||
| TvlagNewCfgTrunkTable | 1.3.6.1.4.1.20301.2.7.15.2.1.18.7 | NA | ||
table · not-accessible · current A table of objects of the vLAG groups configured in this switch. | ||||
| RvlagNewCfgTrunkTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.18.7.1 | NA | ||
| CvlagNewCfgTrunkIndex | 1.3.6.1.4.1.20301.2.7.15.2.1.18.7.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current The identifier of the trunk group. | ||||
| CvlagNewCfgTrunkState | 1.3.6.1.4.1.20301.2.7.15.2.1.18.7.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The new administrative state of the vLAG group.
| ||||
| TvlagCurCfgLacpTable | 1.3.6.1.4.1.20301.2.7.15.2.1.18.8 | NA | ||
table · not-accessible · current A table of objects of the vLAG groups configured in this switch. | ||||
| RvlagCurCfgLacpTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.18.8.1 | NA | ||
| CvlagCurCfgLacpKey | 1.3.6.1.4.1.20301.2.7.15.2.1.18.8.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The identifier of the trunk group. | ||||
| CvlagCurCfgLacpState | 1.3.6.1.4.1.20301.2.7.15.2.1.18.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current administrative state of the vLAG group.
| ||||
| TvlagNewCfgLacpTable | 1.3.6.1.4.1.20301.2.7.15.2.1.18.9 | NA | ||
table · not-accessible · current A table of objects of the vLAG groups configured in this switch. | ||||
| RvlagNewCfgLacpTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.1.18.9.1 | NA | ||
| CvlagNewCfgLacpKey | 1.3.6.1.4.1.20301.2.7.15.2.1.18.9.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The identifier of the trunk group. | ||||
| CvlagNewCfgLacpState | 1.3.6.1.4.1.20301.2.7.15.2.1.18.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The new administrative state of the vLAG group.
| ||||
| SvlagCurCfgHlthchkPeerIp | 1.3.6.1.4.1.20301.2.7.15.2.1.18.10 | IpAddress | RO | |
scalar · IpAddress · read-only · current The current Health check Peer ip address. | ||||
| SvlagNewCfgHlthchkPeerIp | 1.3.6.1.4.1.20301.2.7.15.2.1.18.11 | IpAddress | RW | |
scalar · IpAddress · read-write · current The New Health check Peer ip address. | ||||
| SvlagCurCfgTierId | 1.3.6.1.4.1.20301.2.7.15.2.1.18.12 | INTEGER (0..512) | RO | |
scalar · INTEGER (0..512) · read-only · current Current vLAG Tier ID | ||||
| SvlagNewCfgTierId | 1.3.6.1.4.1.20301.2.7.15.2.1.18.13 | INTEGER (0..512) | RW | |
scalar · INTEGER (0..512) · read-write · current This object is used to change the vLAG Tier ID of this switch. vLAG consist of 2 vLAG peer switches connected by ISL link, the system formed by the switches is referred to as a vLAG tier. This object is used to specify the vLAG tier. And the tier id is used to generate vLAG system MAC. | ||||
| SvlagCurCfgStartupDelayInterval | 1.3.6.1.4.1.20301.2.7.15.2.1.18.14 | INTEGER (0..3600) | RO | |
scalar · INTEGER (0..3600) · read-only · current Current vLAG Startup delay interval | ||||
| SvlagNewCfgStartupDelayInterval | 1.3.6.1.4.1.20301.2.7.15.2.1.18.15 | INTEGER (0..3600) | RW | |
scalar · INTEGER (0..3600) · read-write · current This object is used to change the vLAG startup Delay Timer interval. The Timer is used to prevent traffic lost for the vLAG ports may be up before the ISL is up. The Timer is st- arted when the ISL is up and the role has been elected. And when the timer expires, all vLAG ports will be up. Before and during the timer running, all vLAG ports should be err- disabled. | ||||
| SvlagCurCfgGlobalEnable | 1.3.6.1.4.1.20301.2.7.15.2.1.18.16 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current vLAG global status on switch.
| ||||
| SvlagNewCfgGlobalEnable | 1.3.6.1.4.1.20301.2.7.15.2.1.18.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set true to enable vLAG globally or Set false to disable vLAG globally on switch.
| ||||
| SvlagCurCfgHlthchkConnectRetryInterval | 1.3.6.1.4.1.20301.2.7.15.2.1.18.18 | INTEGER (1..300) | RO | |
scalar · INTEGER (1..300) · read-only · current In case of healtcheck TCP connection can not be established, interval at which the retry attempt will be made to connect to the peer. | ||||
| SvlagNewCfgHlthchkConnectRetryInterval | 1.3.6.1.4.1.20301.2.7.15.2.1.18.19 | INTEGER (1..300) | RW | |
scalar · INTEGER (1..300) · read-write · current In case of healtcheck TCP connection can not be established, interval at which the retry attempt will be made to connect to the peer. | ||||
| SvlagCurCfgHlthchkKeepaliveAttempts | 1.3.6.1.4.1.20301.2.7.15.2.1.18.20 | INTEGER (1..24) | RO | |
scalar · INTEGER (1..24) · read-only · current Number of keepalive attempts made before declaring peer is down. Within this time, atleast one of the keepalive message should have been received from the peer. | ||||
| SvlagNewCfgHlthchkKeepaliveAttempts | 1.3.6.1.4.1.20301.2.7.15.2.1.18.21 | INTEGER (1..24) | RW | |
scalar · INTEGER (1..24) · read-write · current Number of keepalive attempts made before declaring peer is down.Within this time, atleast one of the keepalive message should have been received from the peer. | ||||
| SvlagCurCfgHlthchkKeepaliveInterval | 1.3.6.1.4.1.20301.2.7.15.2.1.18.22 | INTEGER (2..300) | RO | |
scalar · INTEGER (2..300) · read-only · current Interval between keepalives sent over healthcheck TCP session to keep the session alive. | ||||
| SvlagNewCfgHlthchkKeepaliveInterval | 1.3.6.1.4.1.20301.2.7.15.2.1.18.23 | INTEGER (2..300) | RW | |
scalar · INTEGER (2..300) · read-write · current Interval between keepalives sent over healthcheck TCP session to keep the session alive. | ||||
| SvlagCurCfgAutoRecoveryInterval | 1.3.6.1.4.1.20301.2.7.15.2.1.18.24 | INTEGER (240..3600) | RO | |
scalar · INTEGER (240..3600) · read-only · current Current vLAG Auto Recovery interval | ||||
| SvlagNewCfgAutoRecoveryInterval | 1.3.6.1.4.1.20301.2.7.15.2.1.18.25 | INTEGER (240..3600) | RW | |
scalar · INTEGER (240..3600) · read-write · current This object is used to change the vLAG Auto Recovery Timer interval. The Timer is used to prevent all vlag ports stay in ErrDisabled state when booting two vLAG switches but one can not be up. | ||||
| NecpCfg | 1.3.6.1.4.1.20301.2.7.15.2.1.19 | |||
| SecpCurCfgRetrans | 1.3.6.1.4.1.20301.2.7.15.2.1.19.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The ECP retransmission interval in millisecond | ||||
| SecpNewCfgRetrans | 1.3.6.1.4.1.20301.2.7.15.2.1.19.2 | INTEGER (100..9000) | RW | |
scalar · INTEGER (100..9000) · read-write · current The ECP retransmission interval in millisecond | ||||
| Nlayer2Stats | 1.3.6.1.4.1.20301.2.7.15.2.2 | |||
| NfdbStats | 1.3.6.1.4.1.20301.2.7.15.2.2.1 | |||
| SfdbStatsCurrent | 1.3.6.1.4.1.20301.2.7.15.2.2.1.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Current number of entries in the Forwarding Database. | ||||
| SfdbStatsHiwat | 1.3.6.1.4.1.20301.2.7.15.2.2.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Highest number of entries recorded at any given time in the Forwarding Database. | ||||
| SfdbStatsClear | 1.3.6.1.4.1.20301.2.7.15.2.2.1.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear FDB statistics
| ||||
| NstpStats | 1.3.6.1.4.1.20301.2.7.15.2.2.2 | |||
| TstgStatsPortTable | 1.3.6.1.4.1.20301.2.7.15.2.2.2.1 | NA | ||
table · not-accessible · current The table of Spanning Tree Group port statistics. | ||||
| RstgStatsPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1 | NA | ||
row · not-accessible · current Statistics about port of a particular Spanning Tree Group. | ||||
| CstgStatsStpIndex | 1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. | ||||
| CstgStatsPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The port identifier of a particular Spanning Tree Group. | ||||
| CstgStatsPortRcvCfgBpdus | 1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Number of Configuration BPDU's received on this port. | ||||
| CstgStatsPortRcvTcnBpdus | 1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Number of TCN BPDU's received on this port. | ||||
| CstgStatsPortXmtCfgBpdus | 1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Number of Configuration BPDU's trasmitted from the port. | ||||
| CstgStatsPortXmtTcnBpdus | 1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Number of TCN BPDU's trasmitted from the port. | ||||
| NlacpStats | 1.3.6.1.4.1.20301.2.7.15.2.2.4 | |||
| TlacpStatsTable | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1 | NA | ||
table · not-accessible · current The table of LACP Stats. | ||||
| RlacpStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1 | NA | ||
| ClacpStatsIndex | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current Index | ||||
| ClacpdusRx | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Valid LACPDUs received | ||||
| CmarkerpdusRx | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Valid Marker PDUs received | ||||
| CmarkerresponsepdusRx | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Valid Marker Rsp PDUs received | ||||
| CunknownRx | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Unknown version/TLV type | ||||
| CillegalRx | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Illegal subtype received | ||||
| ClacpdusTx | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current LACPDUs transmitted | ||||
| CmarkerpdusTx | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Market PDUs transmitted | ||||
| CmarkerresponsepdusTx | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Marker Rsp PDUs transmitted | ||||
| ClacpClearStats | 1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this to clear(2) results in clearing the LACP statistics.
| ||||
| NhotlinksStats | 1.3.6.1.4.1.20301.2.7.15.2.2.6 | |||
| ThotlinksStatsTriggerTable | 1.3.6.1.4.1.20301.2.7.15.2.2.6.1 | NA | ||
table · not-accessible · current The Hot Links Trigger Table Stats. | ||||
| RhotlinksStatsTriggerTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1 | NA | ||
row · not-accessible · current A row in the Hot Links Trigger Table Stats. | ||||
| ChotlinksStatsTriggerId | 1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Trigger identifier. | ||||
| ChotlinksStatsTriggerName | 1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current A textual string containing the trigger name. | ||||
| ChotlinksStatsTriggerMasterActive | 1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The number of times the master interface was set to active. | ||||
| ChotlinksStatsTriggerBackupActive | 1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The number of times the backup interface was set to active. | ||||
| ChotlinksStatsTriggerFdbUpdate | 1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The number of times an FDB update was performed. | ||||
| ChotlinksStatsTriggerFdbFailed | 1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The number of times an FDB update failed. | ||||
| NlldpStats | 1.3.6.1.4.1.20301.2.7.15.2.2.7 | |||
| SlldpStatsTableMaxEnt | 1.3.6.1.4.1.20301.2.7.15.2.2.7.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of rows in the statistics host table. | ||||
| TlldpStatsTable | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2 | NA | ||
table · not-accessible · current The table of LLDP statistics. | ||||
| RlldpStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1 | NA | ||
| ClldpStatsIndex | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in LLDP port statistics. | ||||
| ClldpStatsFramesOutTotal | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of LLDP frames transmitted in this port. | ||||
| ClldpStatsFramesInTotal | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of LLDP frames received in this port. | ||||
| ClldpStatsFramesInErrorsTotal | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of erroneous LLDP frames received in this port. | ||||
| ClldpStatsFramesDiscardedTotal | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of received LLDP frames discarded in this port. | ||||
| ClldpStatsTLVsUnrecognizedTotal | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of unrecognized TLVs in this port. | ||||
| ClldpStatsAgeoutsTotal | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbor's information deleted in this port. | ||||
| ClldpStatsClear | 1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this to clear(2) results in clearing the LLDP statistics.
| ||||
| SlldpStatsClearAll | 1.3.6.1.4.1.20301.2.7.15.2.2.7.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(2) results in clearing the LLDP statistics for all the ports.
| ||||
| NoamStats | 1.3.6.1.4.1.20301.2.7.15.2.2.8 | |||
| ToamStatsPortTable | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1 | NA | ||
table · not-accessible · current The table of OAM port statistics. | ||||
| RoamStatsPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1 | NA | ||
| CoamStatsPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The OAM Port number for which the table is related. | ||||
| CoamStatsPortInfoTx | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The number of transmitted OAM information packets | ||||
| CoamStatsPortInfoRx | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The number of received OAM information packets | ||||
| CoamStatsPortUnsupTx | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The number of transmitted OAM unsupported packets | ||||
| CoamStatsPortUnsupRx | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The number of received OAM unsupported packets | ||||
| CoamStatsPortLocalLinkFaults | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The number of local OAM link fault packets | ||||
| CoamStatsPortLocalCriticalEvents | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The number of local OAM critical event packets | ||||
| CoamStatsPortLocalDyingGasps | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The number of local OAM dying gasp packets | ||||
| CoamStatsPortRemoteLinkFaults | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The number of remote OAM link fault packets | ||||
| CoamStatsPortRemoteCriticalEvents | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The number of remote OAM critical event packets | ||||
| CoamStatsPortRemoteDyingGasps | 1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The number of remote OAM dying gasp packets | ||||
| NvlagStats | 1.3.6.1.4.1.20301.2.7.15.2.2.11 | |||
| NvlagStatsSystem | 1.3.6.1.4.1.20301.2.7.15.2.2.11.1 | |||
| SvlagStatsClear | 1.3.6.1.4.1.20301.2.7.15.2.2.11.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object to 'clear' will reset all statistics objects of VLAG. A get action of this object will always return 'other'. Setting this object to 'other' is not allowed.
| ||||
| NvlagStatsIsl | 1.3.6.1.4.1.20301.2.7.15.2.2.11.2 | |||
| SvlagStatsIslInOctets | 1.3.6.1.4.1.20301.2.7.15.2.2.11.2.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag ISL octets received. | ||||
| SvlagStatsIslInPackets | 1.3.6.1.4.1.20301.2.7.15.2.2.11.2.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag ISL packets received. | ||||
| SvlagStatsIslOutOctets | 1.3.6.1.4.1.20301.2.7.15.2.2.11.2.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag ISL octets sent. | ||||
| SvlagStatsIslOutPackets | 1.3.6.1.4.1.20301.2.7.15.2.2.11.2.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag ISL packets sent. | ||||
| NvlagStatsHealth | 1.3.6.1.4.1.20301.2.7.15.2.2.11.3 | |||
| NvlagStatsLacp | 1.3.6.1.4.1.20301.2.7.15.2.2.11.4 | |||
| NvlagStatsPdu | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5 | |||
| SvlagStatsPduSentRoleElection | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for role elections | ||||
| SvlagStatsPduSentSystemInfo | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for system info | ||||
| SvlagStatsPduSentFdbDynamicAdd | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for addition of FDB dynamic entry | ||||
| SvlagStatsPduSentFdbDynamicDel | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for deletion of FDB dynamic entry | ||||
| SvlagStatsPduSentFdbInactiveAdd | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for addition of FDB inactive entry | ||||
| SvlagStatsPduSentFdbInactiveDel | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for deletion of FDB inactive entry | ||||
| SvlagStatsPduSentHlthCheck | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for Health check | ||||
| SvlagStatsPduSentOther | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for others | ||||
| SvlagStatsPduSentUnknown | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for unknowns | ||||
| SvlagStatsPduRcvRoleElection | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for role elections | ||||
| SvlagStatsPduRcvSystemInfo | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for system info | ||||
| SvlagStatsPduRcvFdbDynamicAdd | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for addition of FDB dynamic entry | ||||
| SvlagStatsPduRcvFdbDynamicDel | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.24 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for deletion of FDB dynamic entry | ||||
| SvlagStatsPduRcvFdbInactiveAdd | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.25 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for addition of FDB inactive entry | ||||
| SvlagStatsPduRcvFdbInactiveDel | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.26 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for deletion of FDB inactive entry | ||||
| SvlagStatsPduRcvHlthCheck | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.29 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for Health check | ||||
| SvlagStatsPduRcvOther | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.31 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for others | ||||
| SvlagStatsPduRcvUnknown | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.32 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for unknowns | ||||
| SvlagStatsPduSentPeerInstanceEnable | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.33 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for peer instance enable | ||||
| SvlagStatsPduSentPeerInstanceDisable | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.34 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for peer instance disable | ||||
| SvlagStatsPduSentISLHello | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.35 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs sent for ISL hello | ||||
| SvlagStatsPduRcvISLHello | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.36 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for ISL hello | ||||
| SvlagStatsPduRcvPeerInstanceEnable | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.37 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for peer instance enable | ||||
| SvlagStatsPduRcvPeerInstanceDisable | 1.3.6.1.4.1.20301.2.7.15.2.2.11.5.38 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of vlag PDUs received for peer instance disable | ||||
| NvlagStatsIgmp | 1.3.6.1.4.1.20301.2.7.15.2.2.11.6 | |||
| SvlagStatsIgmpReportsForwarded | 1.3.6.1.4.1.20301.2.7.15.2.2.11.6.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP reports forwarded to the peer | ||||
| SvlagStatsIgmpLeavesForwarded | 1.3.6.1.4.1.20301.2.7.15.2.2.11.6.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP leaves forwarded to the peer | ||||
| Nlayer2Info | 1.3.6.1.4.1.20301.2.7.15.2.3 | |||
| NfdbInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.1 | |||
| SfdbClear | 1.3.6.1.4.1.20301.2.7.15.2.3.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the entire master FDB.
| ||||
| TfdbTable | 1.3.6.1.4.1.20301.2.7.15.2.3.1.2 | NA | ||
table · not-accessible · current The table of FDB entries. | ||||
| RfdbEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1 | NA | ||
| CfdbMacAddr | 1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address for the FDB entry. | ||||
| CfdbVlan | 1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN ID for the FDB entry. | ||||
| CfdbSrcPort | 1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.3 | PortNumber | RO | |
column · PortNumber · read-only · current Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address. | ||||
| CfdbState | 1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group
| ||||
| CfdbSrcTrunk | 1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk. | ||||
| CfdbStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current '1' if it is permanent '0' if it is not permanent | ||||
| TmcastFdbTable | 1.3.6.1.4.1.20301.2.7.15.2.3.1.3 | NA | ||
table · not-accessible · current The table of static multicast FDB entries. | ||||
| RmcastFdbEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1 | NA | ||
| CmcastFdbEntryIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The static multicast fdb entry index | ||||
| CmcastFdbMacAddr | 1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current The static multicast MAC address for the FDB entry. | ||||
| CmcastFdbVlan | 1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN ID for the FDB entry. | ||||
| CmcastFdbSrcPorts | 1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1.4 | PortNumber | RO | |
column · PortNumber · read-only · current The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address. | ||||
| NstpInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.2 | |||
| TstpInfoTable | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1 | NA | ||
table · not-accessible · current The table of Spanning Tree Group information. | ||||
| RstpInfoTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1 | NA | ||
| CstpInfoIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstpInfoTimeSinceTopChange | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.2 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. | ||||
| CstpInfoTopChanges | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of topology changes detected by this bridge since the management entity was last reset or initialized. | ||||
| CstpInfoDesignatedRoot | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.4 | BridgeId | RO | |
column · BridgeId · read-only · current The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| CstpInfoRootCost | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The cost of the path to the root as seen from this bridge. | ||||
| CstpInfoRootPort | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.6 | PortNumber | RO | |
column · PortNumber · read-only · current The port number of the port which offers the lowest cost path from this bridge to the root bridge. | ||||
| CstpInfoMaxAge | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| CstpInfoHelloTime | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| CstpInfoForwardDelay | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. | ||||
| CstpInfoHoldTime | 1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | ||||
| TstpInfoPortTable | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2 | NA | ||
table · not-accessible · current The table of Spanning Tree Group port information. | ||||
| RstpInfoPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1 | NA | ||
row · not-accessible · current Information about port configuration for a particular Spanning Tree Group. | ||||
| CstpInfoPortStpIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. | ||||
| CstpInfoPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The port identifier of a particular Spanning Tree Group. | ||||
| CstpInfoPortState | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled, this object will have a value of disabled(1). If port is not controlled by STP, this object will have a value of na (8).
| ||||
| CstpInfoPortDesignatedRoot | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.4 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | ||||
| CstpInfoPortDesignatedCost | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | ||||
| CstpInfoPortDesignatedBridge | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.6 | BridgeId | RO | |
column · BridgeId · read-only · current The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. | ||||
| CstpInfoPortDesignatedPort | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.7 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The Port Identifier of the port on the Designated Bridge for this port's segment. | ||||
| CstpInfoPortForwardTransitions | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this port has transitioned from the Learning state to the Forwarding state. | ||||
| CstpInfoPortPathCost | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The path cost of the port. | ||||
| CstpInfoPortRole | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The port role. Returns unknown(7) when MSTP/RSTP is not enabled, otherwise returns appropriate port role.
| ||||
| CstpInfoPortLinkType | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The point-to-point status of the LAN segment attached to this port. A value of p2p (1) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(2) indicates that this port is being treated as having a shared media connection.
| ||||
| CstpInfoPortEdge | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The port is an edge port or not. Returns disabled(2) when the port is not an edge port and returns enabled(1) when it is an edge port.
| ||||
| CstpInfoPortExtGuard | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Current STP guard state. Not include BPDU Guard.
| ||||
| CstpInfoPortPriority | 1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value. | ||||
| NlacpInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.3 | |||
| TlacpInfoAggrTable | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1 | NA | ||
table · not-accessible · current The table of LACP aggregator information. | ||||
| RlacpInfoAggrTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1 | NA | ||
| ClacpInfoAggrIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The aggregator identifier. | ||||
| ClacpInfoAggrId | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current LACP aggregator ID | ||||
| ClacpInfoAggrMac | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current LACP aggregator MAC address | ||||
| ClacpInfoAggrActSysPrio | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current LACP aggregator actor system priority | ||||
| ClacpInfoAggrActSysId | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current LACP aggregator actor system ID | ||||
| ClacpInfoAggrIndivState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current LACP aggregator individual state
| ||||
| ClacpInfoAggrActAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current LACP aggregator actor admin key | ||||
| ClacpInfoAggrActOperKey | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current LACP aggregator actor oper key | ||||
| ClacpInfoAggrPartSysPrio | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current LACP aggregator partner system priority | ||||
| ClacpInfoAggrPartSysId | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current LACP aggregator partner system ID | ||||
| ClacpInfoAggrPartOperKey | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current LACP aggregator partner oper key | ||||
| ClacpInfoAggrReadyState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current LACP aggregator ready state
| ||||
| ClacpInfoAggrNumPorts | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Number of ports in aggregator | ||||
| ClacpInfoAggrMinLinks | 1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Min Links of ports in aggregator | ||||
| NlacpInfoPort | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2 | |||
| TlacpInfoPortGeneralTable | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1 | NA | ||
table · not-accessible · current The table of LACP port general information. | ||||
| RlacpInfoPortGeneralTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1 | NA | ||
| ClacpInfoPortGeneralIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port identifier. | ||||
| ClacpInfoPortLacpEna | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current LACP enabled on port
| ||||
| ClacpInfoPortAdminEna | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current LACP port admin enabled
| ||||
| ClacpInfoPortActSysId | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current LACP port actor system ID | ||||
| ClacpInfoPortActSysPrio | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port actor system priority | ||||
| ClacpInfoPortActAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port actor admin key | ||||
| ClacpInfoPortActOperKey | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port actor oper key | ||||
| ClacpInfoPortActPortNum | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port number | ||||
| ClacpInfoPortActPortPrio | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port priority | ||||
| ClacpInfoPortIndivState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current LACP port individual state
| ||||
| ClacpInfoSelAggrId | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port selected aggregator ID | ||||
| ClacpInfoAttAggrId | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port attached aggregator ID | ||||
| ClacpInfoPortReadyN | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port.
| ||||
| ClacpInfoPortNtt | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
| ||||
| ClacpInfoPortSelected | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently prevent the port from being enabled as part of the aggregation, and so the port is being held in standby condition. A value of suspended indicates that the port in a LACP port-channel cannot be aggregated due to, for example, incompatible LACP system/port attributes of the remote endpoints. A value of suspended indicates that the port in a LACP port-channel cannot be aggregated due to, for example, not receiveing LACPDU. A value of individual indicates that the port works as a normal link-up port due to not receiving LACPDU.
| ||||
| ClacpInfoPortMoved | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been used by received in an incoming LACPDU on a different port.
| ||||
| ClacpInfoCollDetState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current LACP port collision and detection state
| ||||
| ClacpInfoPortRxState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.18 | DisplayString | RO | |
column · DisplayString · read-only · current LACP port RX machine state | ||||
| ClacpInfoPortMuxState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.19 | DisplayString | RO | |
column · DisplayString · read-only · current LACP port Mux machine state | ||||
| ClacpInfoPortPerState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.20 | DisplayString | RO | |
column · DisplayString · read-only · current LACP port periodic machine state | ||||
| ClacpInfoPortPerTraTimer | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current Periodic Transmit Timer | ||||
| ClacpInfoPortCurWhileTimer | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current Current While Timer | ||||
| ClacpInfoPortOperState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational state of LACP on the port.
| ||||
| TlacpInfoPortAdminTable | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2 | NA | ||
table · not-accessible · current The table of LACP port admin information. | ||||
| RlacpInfoPortAdminTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1 | NA | ||
| ClacpInfoPortAdminIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port identifier. | ||||
| ClacpInfoPortActAdPortState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state | ||||
| ClacpInfoPortActAdActiv | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Administrator Port Activity
| ||||
| ClacpInfoPortActAdSync | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Administrator Port Synchronization
| ||||
| ClacpInfoPortActAdDef | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Administrator Port Defaulted
| ||||
| ClacpInfoPortActAdTimeout | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Administrator Port Timeout
| ||||
| ClacpInfoPortActAdColl | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Administrator Port Collecting
| ||||
| ClacpInfoPortActAdExp | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Administrator Port Expired
| ||||
| ClacpInfoPortActAdAggr | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Administrator Port Aggregation
| ||||
| ClacpInfoPortActAdDist | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Administrator Port Distributing
| ||||
| TlacpInfoPortOperTable | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3 | NA | ||
table · not-accessible · current The table of LACP port oper information. | ||||
| RlacpInfoPortOperTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1 | NA | ||
| ClacpInfoPortOperIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port identifier. | ||||
| ClacpInfoPortPartOpSysPrio | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The value of Partner Operator Port System Priority | ||||
| ClacpInfoPortPartOpSysId | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The value of Partner Operator Port System ID | ||||
| ClacpInfoPortPartOpKey | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The value of Partner Operator Port Key | ||||
| ClacpInfoPortPartOpPortNum | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The Partner Operator Port Number | ||||
| ClacpInfoPortPartOpPortPrio | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The value of Partner Operator Port Priority | ||||
| ClacpInfoPortActOpPortState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state | ||||
| ClacpInfoPortActOpActiv | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Operator Port Activity
| ||||
| ClacpInfoPortActOpSync | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Operator Port Synchronization
| ||||
| ClacpInfoPortActOpDef | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Operator Port Defaulted
| ||||
| ClacpInfoPortActOpTimeout | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Operator Port Timeout
| ||||
| ClacpInfoPortActOpColl | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Operator Port Collecting
| ||||
| ClacpInfoPortActOpExp | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Operator Port Expired
| ||||
| ClacpInfoPortActOpAggr | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Operator Port Aggregation
| ||||
| ClacpInfoPortActOpDist | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Actor Operator Port Distributing
| ||||
| ClacpInfoPortPartOpPortState | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.16 | DisplayString | RO | |
column · DisplayString · read-only · current The state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state | ||||
| ClacpInfoPortPartOpActiv | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Partner Operator Port Activity
| ||||
| ClacpInfoPortPartOpSync | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Partner Operator Port Synchronization
| ||||
| ClacpInfoPortPartOpDef | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Partner Operator Port Defaulted
| ||||
| ClacpInfoPortPartOpTimeout | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Partner Operator Port Timeout
| ||||
| ClacpInfoPortPartOpColl | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Partner Operator Port Collecting
| ||||
| ClacpInfoPortPartOpExp | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Partner Operator Port Expired
| ||||
| ClacpInfoPortPartOpAggr | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Partner Operator Port Aggregation
| ||||
| ClacpInfoPortPartOpDist | 1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Partner Operator Port Distributing
| ||||
| NcistInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.4 | |||
| NcistGeneralInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1 | |||
| ScistRoot | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.1 | BridgeId | RO | |
scalar · BridgeId · read-only · current The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| ScistRootPathCost | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The cost of the path to the CIST Root as seen from this bridge. | ||||
| ScistRootPort | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.3 | PortNumber | RO | |
scalar · PortNumber · read-only · current The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge. | ||||
| ScistBridgeHelloTime | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The amount of time between the transmission of Configuration bridge PDUs in seconds. | ||||
| ScistBridgeMaxAge | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| ScistBridgeForwardDelay | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| ScistRegionalRoot | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.7 | BridgeId | RO | |
scalar · BridgeId · read-only · current The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| ScistRegionalPathCost | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Cost of the path to the CIST Regional Root as seen from this bridge. | ||||
| SmstpDigest | 1.3.6.1.4.1.20301.2.7.15.2.3.4.1.9 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current The digest of the mstp. | ||||
| TcistInfoPortTable | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2 | NA | ||
table · not-accessible · current The table of CIST Port information. | ||||
| RcistInfoPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1 | NA | ||
| CcistInfoPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number of the port for which this entry contains spanning tree configuration. | ||||
| CcistInfoPortPriority | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value. | ||||
| CcistInfoPortPathCost | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The contribution of this port to the path cost of paths towards the CIST Root which include this port. | ||||
| CcistInfoPortState | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Current state of the Port as defined by the Common spanning tree protocol.
| ||||
| CcistInfoPortRole | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Selected Port Role of the port for this spanning tree instance.
| ||||
| CcistInfoPortDesignatedBridge | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.6 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. | ||||
| CcistInfoPortDesignatedPort | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.7 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The Port identifier of the port on the Designated Bridge for this port's segment. | ||||
| CcistInfoPortLinkType | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The point-to-point status of the LAN segment attached to this port. A value of p2p (1) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(2) indicates that this port is being treated as having a shared media connection.
| ||||
| CcistInfoPortHelloTime | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current CIST port Hello Time | ||||
| CcistInfoPortEdge | 1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The port is an edge port or not. Returns disabled(2) when the port is not an edge port and returns enabled(1) when it is an edge port.
| ||||
| NvlanInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.5 | |||
| TvlanInfoTable | 1.3.6.1.4.1.20301.2.7.15.2.3.5.1 | NA | ||
table · not-accessible · current The table of VLAN information. | ||||
| RvlanInfoTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1 | NA | ||
| CvlanInfoId | 1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1.1 | INTEGER (1..4090) | RO | |
column · INTEGER (1..4090) · read-only · current The VLAN identifier. | ||||
| CvlanInfoName | 1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The VLAN name. | ||||
| CvlanInfoStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable, VLAN state information
| ||||
| CvlanInfoPorts | 1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| Ndot1xInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.6 | |||
| Tdot1xInfoPortTable | 1.3.6.1.4.1.20301.2.7.15.2.3.6.1 | NA | ||
table · not-accessible · current The table of 8021x configuration in the Current_config. | ||||
| Rdot1xInfoPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1 | NA | ||
| Cdot1xInfoPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The 8021x Port number for which the table is related. | ||||
| Cdot1xInfoPortAuthMode | 1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication mode
| ||||
| Cdot1xInfoPortAuthStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication status
| ||||
| Cdot1xInfoPortAuthPAEState | 1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Authenticator PAE State
| ||||
| Cdot1xInfoPortBackAuthState | 1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Backend authenticator PAE state
| ||||
| Cdot1xInfoPortAssignedVlan | 1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Vlan assigned from radius server.Value of 0 indicates , no vlan assigned via Radius | ||||
| Ndot1xSystemInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.6.2 | |||
| Sdot1xSystemCapability | 1.3.6.1.4.1.20301.2.7.15.2.3.6.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current System capability
| ||||
| Sdot1xSystemStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.6.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current System status
| ||||
| Sdot1xSystemProtoVersion | 1.3.6.1.4.1.20301.2.7.15.2.3.6.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Protocol version | ||||
| NgenInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.7 | |||
| NtrunkGroupInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.9 | |||
| TtrunkGroupInfoTable | 1.3.6.1.4.1.20301.2.7.15.2.3.9.1 | NA | ||
table · not-accessible · current The table of trunk group information. | ||||
| RtrunkGroupInfoTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1 | NA | ||
| CtrunkGroupInfoIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the trunk group. | ||||
| CtrunkGroupInfoState | 1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Trunk group state.
| ||||
| CtrunkGroupInfoPorts | 1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group | ||||
| CtrunkGroupInfoProtocol | 1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Trunk group protocol Static - static trunk group Lacp - dynamic trunk group
| ||||
| TtrunkGroupInfoPortTable | 1.3.6.1.4.1.20301.2.7.15.2.3.9.2 | NA | ||
table · not-accessible · current The table of Trunk Group Info. | ||||
| RtrunkGroupInfoPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.9.2.1 | NA | ||
row · not-accessible · current A row in the Trunk Info table. | ||||
| CtrunkGroupInfoPortTrunkId | 1.3.6.1.4.1.20301.2.7.15.2.3.9.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Trunk identifier. | ||||
| CtrunkGroupInfoPortPortId | 1.3.6.1.4.1.20301.2.7.15.2.3.9.2.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The Port identifier. | ||||
| CtrunkGroupInfoPortStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.9.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The Port Status.
| ||||
| NhotlinksInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.10 | |||
| ShotlinksInfoOnState | 1.3.6.1.4.1.20301.2.7.15.2.3.10.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Hot Links ON/OFF setting info.
| ||||
| ShotlinksInfoFdbUpdateState | 1.3.6.1.4.1.20301.2.7.15.2.3.10.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable Hot Links FDB Update setting info.
| ||||
| ThotlinksInfoTriggerTable | 1.3.6.1.4.1.20301.2.7.15.2.3.10.3 | NA | ||
table · not-accessible · current The Hot Links Trigger Table Info. | ||||
| RhotlinksInfoTriggerTableEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1 | NA | ||
| ChotlinksInfoTriggerId | 1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Trigger identifier. | ||||
| ChotlinksInfoTriggerName | 1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current A textual string containing the trigger name. | ||||
| ChotlinksInfoTriggerState | 1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable Trigger state info.
| ||||
| ChotlinksInfoTriggerPreemptState | 1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable Preemption state info.
| ||||
| ChotlinksInfoTriggerFdelay | 1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Forward Delay setting info (in secs). | ||||
| ChotlinksInfoTriggerActive | 1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current A textual string containing the active interface info. | ||||
| ShotlinksInfoBpduState | 1.3.6.1.4.1.20301.2.7.15.2.3.10.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable Hot Links BPDU flood setting info.
| ||||
| ShotlinksInfoFdbUpdateRate | 1.3.6.1.4.1.20301.2.7.15.2.3.10.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Hot Links FDB update rate (packets per second). | ||||
| NlldpInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.11 | |||
| TlldpInfoPortTable | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1 | NA | ||
table · not-accessible · current The table of LLDP Port Info. | ||||
| RlldpInfoPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1 | NA | ||
| ClldpInfoPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in LLDP info port table. | ||||
| ClldpInfoPortAlias | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The port alias of the port in LLDP info port table. | ||||
| ClldpInfoPortMacAddress | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.3 | PhysAddress | RO | |
column · PhysAddress · read-only · current The mac address of the port in LLDP info port table. | ||||
| ClldpInfoPortMtu | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The MTU size of the port in LLDP info port table. | ||||
| ClldpInfoPortEnabled | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The PortEnabled field of the port in LLDP info port table.
| ||||
| ClldpInfoPortAdminStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The Admin Status of the port in LLDP info port table.
| ||||
| ClldpInfoPortRxChanges | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The rxChanges field of the port in LLDP info port table.
| ||||
| ClldpInfoPortportdesctlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Port Description TLV state of the LLDP port.
| ||||
| ClldpInfoPortsysnametlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This is the System Name TLV state of the LLDP port.
| ||||
| ClldpInfoPortsysdescrtlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This is the System Description TLV state of the LLDP port.
| ||||
| ClldpInfoPortsyscaptlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This is the System Capabilities TLV state of the LLDP port.
| ||||
| ClldpInfoPortmgmtaddrtlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Management Address TLV state of the LLDP port.
| ||||
| ClldpInfoPortportvidtlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Port VLAN ID TLV state of the LLDP port.
| ||||
| ClldpInfoPortportprottlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Port and Protocol VLAN ID TLV state of the LLDP port.
| ||||
| ClldpInfoPortvlannametlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current This is the VLAN Name TLV state of the LLDP port.
| ||||
| ClldpInfoPortprotidtlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Protocol Identity TLV state of the LLDP port.
| ||||
| ClldpInfoPortmacphytlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current This is the MAC/PHY Configuration/Status TLV state of the LLDP port.
| ||||
| ClldpInfoPortpowermditlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Power Via MDI TLV state of the LLDP port.
| ||||
| ClldpInfoPortlinkaggrtlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Link Aggregation TLV state of the LLDP port.
| ||||
| ClldpInfoPortframesztlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current This is the Maximum Frame Size TLV state of the LLDP port.
| ||||
| ClldpInfoPortdcbxtlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current This is the DCBX TLV state of the LLDP port.
| ||||
| ClldpInfoPortevbtlv | 1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This is the EVB TLV state of the LLDP port.
| ||||
| TlldpInfoTxTable | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2 | NA | ||
table · not-accessible · current The table of LLDP Transmit State Machine Info. | ||||
| RlldpInfoTxEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1 | NA | ||
| ClldpInfoTxIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in LLDP Transmit State Machine info table. | ||||
| ClldpInfoTxState | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The transmit state of the port in LLDP Transmit State Machine.
| ||||
| ClldpInfoTxLocalChanged | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The somethingChangedLocal field of the port in LLDP Transmit State Machine.
| ||||
| ClldpInfoTxTTL | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The txTTL timer of the port in LLDP Transmit State Machine. | ||||
| ClldpInfoTxTxTTR | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The txTTR timer of the port in LLDP Transmit State Machine. | ||||
| ClldpInfoTxDelayWhile | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The txDelayWhile timer of the port in LLDP Transmit State Machine. | ||||
| ClldpInfoTxShutdownWhile | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The txShutdownWhile timer of the port in LLDP Transmit State Machine. | ||||
| ClldpInfoTxReinitDelay | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The reinitDelay timer of the port in LLDP Transmit State Machine. | ||||
| ClldpInfoTxHoldMultiplier | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The msgTxHold timer of the port in LLDP Transmit State Machine. | ||||
| ClldpInfoTxTransmitInterval | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The msgTxInterval timer of the port in LLDP Transmit State Machine. | ||||
| ClldpInfoTxTransmitDelay | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The txDelay timer of the port in LLDP Transmit State Machine. | ||||
| ClldpInfoTxDMAC | 1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.12 | DisplayString (SIZE (1..128)) | RO | |
column · DisplayString (SIZE (1..128)) · read-only · current The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00 | ||||
| TlldpInfoRxTable | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3 | NA | ||
table · not-accessible · current The table of LLDP Receive State Machine Info. | ||||
| RlldpInfoRxEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1 | NA | ||
| ClldpInfoRxIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in LLDP Receive State Machine info table. | ||||
| ClldpInfoRxState | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The receive state of the port in LLDP Receive State Machine.
| ||||
| ClldpInfoRxBadFrame | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The badFrame field of the port in LLDP Receive State Machine.
| ||||
| ClldpInfoRxRcvFrame | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The rcvFrame field of the port in LLDP Receive State Machine.
| ||||
| ClldpInfoRxRxInfoAge | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The rxInfoAge field of the port in LLDP Receive State Machine.
| ||||
| ClldpInfoRxRemoteChanged | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The somethingChangedRemote field of the port in LLDP Receive State Machine.
| ||||
| ClldpInfoRxTooManyNeighbors | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The tooManyNeighbors field of the port in LLDP Receive State Machine.
| ||||
| ClldpInfoRxSNMPNotify | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The tooManyNeighbors field of the port in LLDP Receive State Machine.
| ||||
| ClldpInfoRxRxTTL | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The rxTTL timer of the port in LLDP Receive State Machine. | ||||
| ClldpInfoRxTooManyNeighborTimer | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The tooManyNeighborsTimer timer of the port in LLDP Receive State Machine. | ||||
| ClldpInfoRxDMAC | 1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.11 | DisplayString (SIZE (1..128)) | RO | |
column · DisplayString (SIZE (1..128)) · read-only · current The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00 | ||||
| TlldpInfoRemoteDevicesTable | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4 | NA | ||
table · not-accessible · current The table of LLDP remote devices Info. | ||||
| RlldpInfoRemoteDevicesEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1 | NA | ||
| ClldpInfoRemoteDevicesIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.1 | INTEGER (1..256) | RO | |
column · INTEGER (1..256) · read-only · current The index of the row in LLDP remote devices info table. | ||||
| ClldpInfoRemoteDevicesRemoteTTL | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The remote TTL of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesRxChanges | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The rxChanges field of the LLDP remote devices entry.
| ||||
| ClldpInfoRemoteDevicesLocalPort | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.5 | DisplayString (SIZE (1..128)) | RO | |
column · DisplayString (SIZE (1..128)) · read-only · current The local port alias of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesChassisSubtype | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The chassis ID subtype of the LLDP remote devices entry.
| ||||
| ClldpInfoRemoteDevicesChassisId | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.7 | DisplayString (SIZE (1..255)) | RO | |
column · DisplayString (SIZE (1..255)) · read-only · current The chassis ID of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesPortSubtype | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The port ID subtype of the LLDP remote devices entry.
| ||||
| ClldpInfoRemoteDevicesPortId | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.9 | DisplayString (SIZE (1..255)) | RO | |
column · DisplayString (SIZE (1..255)) · read-only · current The port ID of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesSystemName | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.10 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The system name of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesSystemDescription | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.11 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The system description of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesPortDescription | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.12 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The port description of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesSystemCapSupported | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.13 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The supported system capabilities of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesSystemCapEnabled | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.14 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The enabled system capabilities of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDMAC | 1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.15 | DisplayString (SIZE (1..128)) | RO | |
column · DisplayString (SIZE (1..128)) · read-only · current The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00 | ||||
| TlldpInfoRemoteDevicesManAddrTable | 1.3.6.1.4.1.20301.2.7.15.2.3.11.5 | NA | ||
table · not-accessible · current The table of LLDP remote devices management address Info. | ||||
| RlldpInfoRemoteDevicesManAddrEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1 | NA | ||
row · not-accessible · current LLDP remote devices management address Info. | ||||
| ClldpInfoRemoteDevicesManAddrSubtype | 1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The management address subtype of the LLDP remote devices entry.
| ||||
| ClldpInfoRemoteDevicesManAddr | 1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.2 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current The management address of the LLDP remote devices entry. | ||||
| ClldpInfoRemoteDevicesManAddrIfSubtype | 1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The interface numbering subtype of the LLDP remote devices management address entry.
| ||||
| ClldpInfoRemoteDevicesManAddrIfId | 1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number of the LLDP remote devices management address entry. | ||||
| ClldpInfoRemoteDevicesManAddrOID | 1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.5 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The object identifier of the LLDP remote devices management address entry. | ||||
| SlldpClearMsap | 1.3.6.1.4.1.20301.2.7.15.2.3.11.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear LLDP remote devices information when setting clearMsap(1). When read, ok(0) is always returned.
| ||||
| TevbTLVInfoTable | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7 | NA | ||
table · not-accessible · current The table of ECDP TLV Info. | ||||
| RevbTLVInfoEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1 | NA | ||
| CevbTLVInfoEntryIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the vsi info table. | ||||
| CevbPort | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The evb tlv port info. | ||||
| CevbLocalCapability | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The local evb tlv capabilityinfo. | ||||
| CevbLocalCurrent | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The local evb tlv current info. | ||||
| CevbLocalRTEVal | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The local evb tlv ECP RTE info. | ||||
| CevbRemoteCapability | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The remote evb tlv capability nfo. | ||||
| CevbRemoteCurrent | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The remote evb tlv cuurent info. | ||||
| CevbRemoteRTEVal | 1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The remote evb tlv ECP RTE info. | ||||
| NoamInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.12 | |||
| ToamInfoPortTable | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1 | NA | ||
table · not-accessible · current The table of OAM port information. | ||||
| RoamInfoPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1 | NA | ||
| CoamInfoPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The OAM Port number for which the table is related. | ||||
| CoamInfoPortLocalState | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current OAM local port state
| ||||
| CoamInfoPortLocalMode | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current OAM local port mode
| ||||
| CoamInfoPortLocalLinkStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current OAM local port link status
| ||||
| CoamInfoPortLocalStable | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current OAM local port stable
| ||||
| CoamInfoPortLocalSatisfied | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current OAM local port satisfied
| ||||
| CoamInfoPortLocalEvaluating | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current OAM local port evaluating
| ||||
| CoamInfoPortRemoteMode | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current OAM remote port mode
| ||||
| CoamInfoPortRemoteMAC | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.9 | PhysAddress | RO | |
column · PhysAddress · read-only · current OAM remote port MAC address | ||||
| CoamInfoPortRemoteStable | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current OAM remote port stable
| ||||
| CoamInfoPortRemoteStateValid | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current OAM remote port state valid
| ||||
| CoamInfoPortRemoteEvaluating | 1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current OAM remote port evaluating
| ||||
| NudldInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.13 | |||
| TudldInfoPortTable | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1 | NA | ||
table · not-accessible · current The table of UDLD port info. | ||||
| RudldInfoPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1 | NA | ||
| CudldInfoPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the row in UDLD port configuration table. | ||||
| CudldInfoPortConfig | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The Config field of the port in UDLD port info table. Shows the administative state of the current port.
| ||||
| CudldInfoPortMode | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The Mode field of the port in UDLD info port table. Shows the udld administrative mode for the current port.
| ||||
| CudldInfoPortLink | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The Link field of the port in UDLD info port table. Shows the state of the link associated with the port.
| ||||
| CudldInfoPortOperationalStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The OperationalStatus field of the port in UDLD info port table. Contains the udld operational state for the current port.
| ||||
| CudldInfoPortBidirectionalStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The BidirectionalStatus field of the port in UDLD info port table. Contains the udld bidirectional state for the current port.
| ||||
| CudldInfoPortInterval | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The Interval field of the port in UDLD info port table. The duration, measured in seconds, of the interval during which UDLD probes are sent, after the linkup or detection phases. Its time unit is 1 second. | ||||
| CudldInfoPortTimeout | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The Timeout field of the port in UDLD info port table. Length of the detection phase, measured in seconds. | ||||
| CudldInfoPortNeighborCount | 1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The Neighbor field of the port in UDLD info port table. Contains the number of udld neighbors for the current port. | ||||
| TudldInfoNeighborTable | 1.3.6.1.4.1.20301.2.7.15.2.3.13.2 | NA | ||
table · not-accessible · current The table of UDLD port neighbor info. | ||||
| RudldInfoNeighborEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1 | NA | ||
row · not-accessible · current A row inside UDLD port info table. | ||||
| CudldInfoNeighborLocalPortIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The index of the port for which neighbor information will be returned. | ||||
| CudldInfoNeighborIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the target neighbor among the port neighbors. | ||||
| CudldInfoNeighborExpiration | 1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Hold time for the given neighbor. | ||||
| CudldInfoNeighborDeviceName | 1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Device name reported by neigbor. | ||||
| CudldInfoNeighborDeviceID | 1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Device ID reported by neigbor. | ||||
| CudldInfoNeighborPortID | 1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Port ID reported by neigbor. | ||||
| NfailoverInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.14 | |||
| SfailoverInfoState | 1.3.6.1.4.1.20301.2.7.15.2.3.14.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current state of failover
| ||||
| TfailoverInfoTriggerTable | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3 | NA | ||
table · not-accessible · current This table holds the information for individual triggers | ||||
| RfailoverInfoTriggerEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1 | NA | ||
| CfailoverInfoTriggerId | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The trigger identifier. | ||||
| CfailoverInfoTriggerState | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The trigger state.
| ||||
| CfailoverInfoTriggerLimit | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Limit number of operational links | ||||
| CfailoverInfoTriggerMonitorState | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The runtime monitor state
| ||||
| CfailoverInfoTriggerMonitorPorts | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The list of ports that are monitored. The ports are
represented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to Monitor list
0 - The represented port does not belong to Monitor list | ||||
| CfailoverInfoTriggerControlState | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The runtime control state
| ||||
| CfailoverInfoTriggerControlPorts | 1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The list of ports that are controlled. The ports are
represented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to Control list
0 - The represented port does not belong to Control list | ||||
| TfailoverInfoMonPortStateTable | 1.3.6.1.4.1.20301.2.7.15.2.3.14.4 | NA | ||
table · not-accessible · current This table holds the information for individual triggers | ||||
| RfailoverInfoTriggerMonPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.14.4.1 | NA | ||
row · not-accessible · current A row in the failover trigger table. | ||||
| CfailoverInfoTriggerMonId | 1.3.6.1.4.1.20301.2.7.15.2.3.14.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The trigger identifier. | ||||
| CfailoverInfoTriggerMonPortId | 1.3.6.1.4.1.20301.2.7.15.2.3.14.4.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The Port identifier. | ||||
| CfailoverInfoTriggerMonPortStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.14.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The Port Status.
| ||||
| TfailoverInfoCtlPortStateTable | 1.3.6.1.4.1.20301.2.7.15.2.3.14.5 | NA | ||
table · not-accessible · current This table holds the information for individual triggers | ||||
| RfailoverInfoTriggerCtlPortEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.14.5.1 | NA | ||
row · not-accessible · current A row in the failover trigger table. | ||||
| CfailoverInfoTriggerCtlId | 1.3.6.1.4.1.20301.2.7.15.2.3.14.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The trigger identifier. | ||||
| CfailoverInfoTriggerCtlPortId | 1.3.6.1.4.1.20301.2.7.15.2.3.14.5.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The Port identifier. | ||||
| CfailoverInfoTriggerCtlPortStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.14.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The Port Status.
| ||||
| NvlagInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.16 | |||
| NvlagInfoSystem | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1 | |||
| SvlagInfoState | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current running state of vLAG.
| ||||
| SvlagInfoAdminRole | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current running role of the switch. Role can be Primary(1), secondary(2) and unelected(3). Primary role indicates that the this switch controls the centralized operation in a vLAG domain. Secondary role indicates that this switch can take up the primary role when primary is not available. Unelected indicates that switches are not detected by one another
| ||||
| SvlagInfoISLId | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current vLAG ISL trunk id. | ||||
| SvlagInfoLocalMac | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.4 | PhysAddress | RO | |
scalar · PhysAddress · read-only · current Local vLAG MAC address. | ||||
| SvlagInfoLocalPriority | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Local vLAG Priority. | ||||
| SvlagInfoRemoteMac | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.6 | PhysAddress | RO | |
scalar · PhysAddress · read-only · current Local vLAG MAC address. | ||||
| SvlagInfoRemotePriority | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current Local vLAG Priority. | ||||
| SvlagInfoHlthchkStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current health check running status.
| ||||
| SvlagInfoStartupDelayInterval | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current Startup Delay Timer Interval. The value may be different from vlagCurCfgStartupDelayInterval for the configuration of the interval after the timer is started can only take effect next startup. | ||||
| SvlagInfoStartupDelayStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current Startup Delay Timer Status.
| ||||
| SvlagInfoSystemMac | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.11 | PhysAddress | RO | |
scalar · PhysAddress · read-only · current System vLAG MAC address | ||||
| SvlagInfoOperaRole | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current vLAG switch operational role.
| ||||
| SvlagInfoAutoRecoveryInterval | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current Auto Recovery Timer Interval. The value may be different from vlagCurCfgAutoRecoveryInterval for the configuration of the interval after the timer is started can only take effect next startup. | ||||
| SvlagInfoAutoRecoveryStatus | 1.3.6.1.4.1.20301.2.7.15.2.3.16.1.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current Auto Recovery Timer Status.
| ||||
| NvlagInfoGroup | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2 | |||
| TvlagInfoInstanceTable | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1 | NA | ||
table · not-accessible · current A table of objects of the running vLAG instances. | ||||
| RvlagInfoInstanceEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1 | NA | ||
| CvlagInstanceId | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of this instance. | ||||
| CvlagInstanceTrunkId | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The trunk id of this vLAG instance. | ||||
| CvlagInstanceAdminKey | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current AdminKey of this vLAG instance. Applicable only incase of dynamic trunks. | ||||
| CvlagInstanceState | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The current running state of the vLAG instance.
| ||||
| NvlagInfoIslGroup | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2 | |||
| SvlagInfoIslId | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current vLAG ISL Id | ||||
| SvlagInfoIslProtocol | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current vLAG ISL trunk group state Static - static trunk group Lacp - dynamic trunk group
| ||||
| SvlagInfoIslPortchannel | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current vLAG ISL portchannel number | ||||
| SvlagInfoIslAdminkey | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current vLAG ISL lacp admin key | ||||
| SvlagInfoIslPorts | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The port list that forms the ISL. The ports are presented
in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL
0 - The represented port does not belong to ISL | ||||
| SvlagInfoIslPortState | 1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.7 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The ISL member ports state. The ports state are presented
in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL and state is up
0 - The represented port does not belong to ISL or state is down | ||||
| NecpInfo | 1.3.6.1.4.1.20301.2.7.15.2.3.17 | |||
| TecpChnlInfoTable | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1 | NA | ||
table · not-accessible · current The table of ECP channel Info. | ||||
| RecpChnlInfoEntry | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1 | NA | ||
| CecpChnlInfoEntryIndex | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the ecp chnl info table. | ||||
| CecpChnlPort | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel port info. | ||||
| CecpChnlStag | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel stag info. | ||||
| CecpChnlSndlen | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel send length info. | ||||
| CecpChnlSndnxt | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel send next info. | ||||
| CecpChnlRcvlast | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel recv last sequence info. | ||||
| CecpChnlStateMachine | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel state machineinfo. | ||||
| CecpChnlRxCnt | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel Rx count info. | ||||
| CecpChnlTxCnt | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel Tx count info. | ||||
| CecpChnlRxDrop | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel RxDrop info. | ||||
| CecpChnlTxDrop | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel TxDrop info. | ||||
| CecpChnlState | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The ecp channel state info.
| ||||
| CecpChnlAckErr | 1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The ecp channel ACK error info. | ||||
| Nlayer2Oper | 1.3.6.1.4.1.20301.2.7.15.2.4 | |||
| Nlayer3 | 1.3.6.1.4.1.20301.2.7.15.3 | |||
| Nlayer3Configs | 1.3.6.1.4.1.20301.2.7.15.3.1 | |||
| NipInterfaceCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.1 | |||
| SipInterfaceTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP interface table. | ||||
| TipCurCfgIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2 | NA | ||
table · not-accessible · current The table of IP interface configuration. | ||||
| RipCurCfgIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1 | NA | ||
| CipCurCfgIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the IP information is related. | ||||
| CipCurCfgIntfAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.2 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current This field configures the new IP/IPv6 addr of the interface. Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| CipCurCfgIntfMask | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.3 | DisplayString (SIZE (0..15)) | RO | |
column · DisplayString (SIZE (0..15)) · read-only · current The subnet mask as IPv4 dotted-quads OR the IPv6 prefix length (integer in range 0..128) associated with this IP address . | ||||
| CipCurCfgIntfBroadcast | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.4 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete The broadcast address of the interface. | ||||
| CipCurCfgIntfVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN associated with the interface. | ||||
| CipCurCfgIntfState | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the interface.
| ||||
| CipCurCfgIntfBootpRelay | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable BOOTP relay.
| ||||
| CipCurCfgIntfRouteAdv | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable route advertisement of the interface.
| ||||
| CipCurCfgIntfManagedCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable Managed config flag of the interface, which allows the host to use DHCP for address configuration.
| ||||
| CipCurCfgIntfOtherCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable Other config flag of the interface, which allows the host to use DHCP for other stateful configuration.
| ||||
| CipCurCfgIntfAdvLifetime | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.15 | INTEGER (0..9000) | RO | |
column · INTEGER (0..9000) · read-only · current Set Router Advertisement lifetime of the interface. | ||||
| CipCurCfgIntfDadAttempts | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.16 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current Set the number of duplicate address detection (dad) attempts of the interface. | ||||
| CipCurCfgIntfReachTime | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.17 | Gauge32 (0..3600000) | RO | |
column · Gauge32 (0..3600000) · read-only · current Set the advertised reachability time of the interface in ms. | ||||
| CipCurCfgIntfAdvInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.18 | INTEGER (4..1800) | RO | |
column · INTEGER (4..1800) · read-only · current Set the IPv6 Router Advertisement interval of the interface. | ||||
| CipCurCfgIntfAdvIntervalMin | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.19 | INTEGER (3..1350) | RO | |
column · INTEGER (3..1350) · read-only · current Set the IPv6 Router Advertisement Minimum interval limit of the interface. | ||||
| CipCurCfgIntfRetransmitTimer | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.20 | Gauge32 (0..4294967295) | RO | |
column · Gauge32 (0..4294967295) · read-only · current Set the IPv6 Router Advertisement Retransmit Timer in ms. | ||||
| CipCurCfgIntfHopLimit | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.21 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current Set the IPv6 Router Advertisement Current Hop Limit | ||||
| CipCurCfgIntfAdvMtu | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable Advertise MTU option.
| ||||
| CipCurCfgIntfIp6Host | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable IPv6 host mode on the interface.
| ||||
| CipCurCfgSecIntfAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.25 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current This field configures the new IP/IPv6 addr of the interface. Address should be in IPv6 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| CipCurCfgSecIntfPrefix | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current The IPv6 prefix length (integer in range 0..128) associated with this IP address . | ||||
| CipCurCfgIntfAnycast | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current This field has the value of anycast(1) if IPv6 interface address is anycast and none(2) if not.
| ||||
| CipCurCfgSecIntfAnycast | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current This field has the value of anycast(1) if secondary IPv6 interface address is anycast and none(2) if not.
| ||||
| CipCurCfgIntfIp6Dstun | 1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable sending of ICMP Unreachable messages.
| ||||
| TipNewCfgIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3 | NA | ||
table · not-accessible · current The table of interface in the new configuration block. | ||||
| RipNewCfgIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1 | NA | ||
| CipNewCfgIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the IP information is related. | ||||
| CipNewCfgIntfAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current This field configures the new IP/IPv6 addr of the interface. Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| CipNewCfgIntfMask | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.3 | DisplayString (SIZE (0..15)) | RC | |
column · DisplayString (SIZE (0..15)) · read-create · current The subnet mask as IPv4 dotted-quads OR the IPv6 prefix length (integer in range 0..128) associated with this IP address . | ||||
| CipNewCfgIntfVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The VLAN associated with the interface. | ||||
| CipNewCfgIntfState | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the interface.
| ||||
| CipNewCfgIntfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CipNewCfgIntfBootpRelay | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable BOOTP relay.
| ||||
| CipNewCfgIntfRouteAdv | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable route advertisement of the interface.
| ||||
| CipNewCfgIntfManagedCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable Managed config flag of the interface, which allows the host to use DHCP for address configuration.
| ||||
| CipNewCfgIntfOtherCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable Other config flag of the interface, which allows the host to use DHCP for other stateful configuration.
| ||||
| CipNewCfgIntfAdvLifetime | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.16 | INTEGER (0..9000) | RC | |
column · INTEGER (0..9000) · read-create · current Set Router Advertisement lifetime of the interface. | ||||
| CipNewCfgIntfDadAttempts | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.17 | INTEGER (1..10) | RC | |
column · INTEGER (1..10) · read-create · current Set the number of duplicate address detection (dad) attempts of the interface. | ||||
| CipNewCfgIntfReachTime | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.18 | Gauge32 (0..3600000) | RC | |
column · Gauge32 (0..3600000) · read-create · current Set the advertised reachability time of the interface in ms. | ||||
| CipNewCfgIntfAdvInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.19 | INTEGER (4..1800) | RC | |
column · INTEGER (4..1800) · read-create · current Set the IPv6 Router Advertisement interval of the interface. | ||||
| CipNewCfgIntfAdvIntervalMin | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.20 | INTEGER (3..1350) | RC | |
column · INTEGER (3..1350) · read-create · current Set the IPv6 Router Advertisement Minimum interval limit of the interface. | ||||
| CipNewCfgIntfRetransmitTimer | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.21 | Gauge32 (0..4294967295) | RC | |
column · Gauge32 (0..4294967295) · read-create · current Set the IPv6 Router Advertisement Retransmit Timer in ms. | ||||
| CipNewCfgIntfHopLimit | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.22 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current Set the IPv6 Router Advertisement Current Hop Limit | ||||
| CipNewCfgIntfAdvMtu | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable Advertise MTU option.
| ||||
| CipNewCfgIntfIp6Host | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable IPv6 host mode on the interface.
| ||||
| CipNewCfgSecIntfAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.26 | DisplayString (SIZE (0..40)) | RW | |
column · DisplayString (SIZE (0..40)) · read-write · current This field configures the new IPv6 addr of the interface. Address should be in IPv6 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| CipNewCfgSecIntfPrefix | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.27 | Integer32 | RW | |
column · Integer32 · read-write · current The IPv6 prefix length (integer in range 0..128) associated with this IP address . | ||||
| CipNewCfgIntfAnycast | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.28 | INTEGER | RW | |
column · INTEGER · read-write · current This field has the value of anycast(1) if IPv6 interface address is anycast and none(2) if not.
| ||||
| CipNewCfgSecIntfAnycast | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.29 | INTEGER | RW | |
column · INTEGER · read-write · current This field has the value of anycast(1) if secondary IPv6 interface address is anycast and none(2) if not.
| ||||
| CipNewCfgIntfIp6Dstun | 1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.30 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable sending of ICMP Unreachable messages.
| ||||
| NipGatewayCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.2 | |||
| SipGatewayTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.2.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP gateway table. | ||||
| TipCurCfgGwTable | 1.3.6.1.4.1.20301.2.7.15.3.1.2.4 | NA | ||
table · not-accessible · current The table of gateways in the current configuration block. | ||||
| RipCurCfgGwEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1 | NA | ||
| CipCurCfgGwIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The gateway number for which the information is related. | ||||
| CipCurCfgGwAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the default gateway. | ||||
| CipCurCfgGwInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.3 | INTEGER (0..60) | RO | |
column · INTEGER (0..60) · read-only · current The interval between ping attempts. | ||||
| CipCurCfgGwRetry | 1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.4 | INTEGER (1..120) | RO | |
column · INTEGER (1..120) · read-only · current The number of failed attempts to declare the default gateway DOWN. | ||||
| CipCurCfgGwState | 1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the default gateway.
| ||||
| CipCurCfgGwArp | 1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of ARP only health checks.
| ||||
| TipNewCfgGwTable | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5 | NA | ||
table · not-accessible · current The table of gateway in the new configuration block. | ||||
| RipNewCfgGwEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1 | NA | ||
| CipNewCfgGwIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The gateway number for which the information is related. | ||||
| CipNewCfgGwAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the default gateway. | ||||
| CipNewCfgGwInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.3 | INTEGER (0..60) | RC | |
column · INTEGER (0..60) · read-create · current The interval in seconds between ping attempts. | ||||
| CipNewCfgGwRetry | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.4 | INTEGER (1..120) | RC | |
column · INTEGER (1..120) · read-create · current The number of failed attempts to declare the default gateway DOWN. | ||||
| CipNewCfgGwState | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the default gateway.
| ||||
| CipNewCfgGwDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CipNewCfgGwArp | 1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the ARP only health checks.
| ||||
| NipStaticRouteCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.3 | |||
| SipStaticRouteTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.3.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the Static Route table. | ||||
| TipCurCfgStaticRouteTable | 1.3.6.1.4.1.20301.2.7.15.3.1.3.2 | NA | ||
table · not-accessible · current The table of static routes in the current configuration block. | ||||
| RipCurCfgStaticRouteEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1 | NA | ||
| CipCurCfgStaticRouteIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static routing table. | ||||
| CipCurCfgStaticRouteDestIp | 1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of this route. | ||||
| CipCurCfgStaticRouteMask | 1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The current subnet mask of this route. | ||||
| CipCurCfgStaticRouteGateway | 1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The current gateway of this route. | ||||
| CipCurCfgStaticRouteInterface | 1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing. | ||||
| TipNewCfgStaticRouteTable | 1.3.6.1.4.1.20301.2.7.15.3.1.3.3 | NA | ||
table · not-accessible · current The table of static routes in the new configuration block. | ||||
| RipNewCfgStaticRouteEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1 | NA | ||
| CipNewCfgStaticRouteIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static routing table. | ||||
| CipNewCfgStaticRouteDestIp | 1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IP address of this route. | ||||
| CipNewCfgStaticRouteMask | 1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet mask of this route. | ||||
| CipNewCfgStaticRouteGateway | 1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the gateway for this route. | ||||
| CipNewCfgStaticRouteAction | 1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CipNewCfgStaticRouteInterface | 1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing. | ||||
| SipStaticRouteClearAllByDestIp | 1.3.6.1.4.1.20301.2.7.15.3.1.3.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current Clears all static routes with the specified destination IP address. | ||||
| SipStaticRouteClearAllByGatewayIp | 1.3.6.1.4.1.20301.2.7.15.3.1.3.5 | IpAddress | RW | |
scalar · IpAddress · read-write · current Clears all static routes with the specified gateway IP address. | ||||
| SipStaticRouteClearAllByInterface | 1.3.6.1.4.1.20301.2.7.15.3.1.3.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clears all routes on the specified inteface number. | ||||
| SipStaticRouteClearAll | 1.3.6.1.4.1.20301.2.7.15.3.1.3.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to clear(2),clears all static routes. Otherwhise nothing is done.
| ||||
| SipStaticRouteCurPingInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.3.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The time between ping retries. | ||||
| SipStaticRouteNewPingInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.3.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The time between ping retries. | ||||
| SipStaticRouteCurPingRetries | 1.3.6.1.4.1.20301.2.7.15.3.1.3.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current The number of ping retries. | ||||
| SipStaticRouteNewPingRetries | 1.3.6.1.4.1.20301.2.7.15.3.1.3.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current The number of ping retries. | ||||
| SipStaticRouteCurEcmpHash | 1.3.6.1.4.1.20301.2.7.15.3.1.3.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current Ecmp Hash based on dipsip/sip.
| ||||
| SipStaticRouteNewEcmpHash | 1.3.6.1.4.1.20301.2.7.15.3.1.3.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Ecmp Hash based on dipsip/sip.
| ||||
| SipStaticRouteCurHealthcheck | 1.3.6.1.4.1.20301.2.7.15.3.1.3.16 | INTEGER | RO | |
scalar · INTEGER · read-only · current Gateway healthcheck functionality
| ||||
| SipStaticRouteNewHealthcheck | 1.3.6.1.4.1.20301.2.7.15.3.1.3.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Gateway healthcheck functionality
| ||||
| NipForwardCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.4 | |||
| NipFwdGeneralCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1 | |||
| SipFwdCurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current IP forwarding global state.
| ||||
| SipFwdNewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current IP forwarding global state.
| ||||
| SipFwdCurCfgDirectedBcast | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable forwarding directed broadcasts.
| ||||
| SipFwdNewCfgDirectedBcast | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable forwarding directed broadcasts.
| ||||
| SipFwdCurCfgNoICMPRedirect | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable no icmp redirects.
| ||||
| SipFwdNewCfgNoICMPRedirect | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable no icmp redirects.
| ||||
| SipFwdCurCfgICMP6Redirect | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable ICMPv6 redirects.
| ||||
| SipFwdNewCfgICMP6Redirect | 1.3.6.1.4.1.20301.2.7.15.3.1.4.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable ICMPv6 redirects.
| ||||
| NvrrpCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.6 | |||
| NvrrpGeneral | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1 | |||
| SvrrpCurCfgGenState | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable VRRP operation globally.
| ||||
| SvrrpNewCfgGenState | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VRRP operation globally.
| ||||
| SvrrpCurCfgGenTckVirtRtrInc | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.3 | INTEGER (0..254) | RO | |
scalar · INTEGER (0..254) · read-only · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers. | ||||
| SvrrpNewCfgGenTckVirtRtrInc | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.4 | INTEGER (0..254) | RW | |
scalar · INTEGER (0..254) · read-write · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers. | ||||
| SvrrpCurCfgGenTckIpIntfInc | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.5 | INTEGER (0..254) | RO | |
scalar · INTEGER (0..254) · read-only · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces. | ||||
| SvrrpNewCfgGenTckIpIntfInc | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.6 | INTEGER (0..254) | RW | |
scalar · INTEGER (0..254) · read-write · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces. | ||||
| SvrrpCurCfgGenTckVlanPortInc | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.7 | INTEGER (0..254) | RO | |
scalar · INTEGER (0..254) · read-only · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router. | ||||
| SvrrpNewCfgGenTckVlanPortInc | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.8 | INTEGER (0..254) | RW | |
scalar · INTEGER (0..254) · read-write · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router. | ||||
| SvrrpCurCfgGenHoldoff | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.19 | INTEGER (0..255) | RO | |
scalar · INTEGER (0..255) · read-only · current The time for VRRP virtual router to hold before it begins to change state to backup or master state. | ||||
| SvrrpNewCfgGenHoldoff | 1.3.6.1.4.1.20301.2.7.15.3.1.6.1.20 | INTEGER (0..255) | RW | |
scalar · INTEGER (0..255) · read-write · current The time for VRRP virtual router to hold before it begins to change state to backup or master state. | ||||
| SvrrpVirtRtrTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.6.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in VRRP virtual router table. | ||||
| TvrrpCurCfgVirtRtrTable | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3 | NA | ||
table · not-accessible · current The table of VRRP virtual routers in the current configuration block. | ||||
| RvrrpCurCfgVirtRtrTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1 | NA | ||
| CvrrpCurCfgVirtRtrIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router table index. | ||||
| CvrrpCurCfgVirtRtrID | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.2 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The VRRP virtual router identifier. | ||||
| CvrrpCurCfgVirtRtrAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The VRRP virtual router IP address. | ||||
| CvrrpCurCfgVirtRtrIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpCurCfgVirtRtrInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.5 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The time interval between VRRP advertisements in seconds. When FAST_ADVERTISEMENT is enabled, this object indicates advertisement interval in centi-seconds | ||||
| CvrrpCurCfgVirtRtrPriority | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.6 | INTEGER (1..254) | RO | |
column · INTEGER (1..254) · read-only · current The priority value to be used by the specified VRRP virtual routers. | ||||
| CvrrpCurCfgVirtRtrPreempt | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
| ||||
| CvrrpCurCfgVirtRtrTckVirtRtr | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
| ||||
| CvrrpCurCfgVirtRtrTckIpIntf | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
| ||||
| CvrrpCurCfgVirtRtrTckVlanPort | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
| ||||
| CvrrpCurCfgVirtRtrState | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the VRRP virtual router.
| ||||
| CvrrpCurCfgVirtRtrFastAdvertisement | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides the status of FAST_ADVERTISEMENT. When FAST_ADVERTISEMENT is enabled, - New message type FAST_ADVERTISEMENT(2) will be used in the VRRP advertisements - Can interop only with another FAST_ADVERTISEMENT enabled router - VRRP advertisement interval will be sent in units of centi-seconds - Timers will be running with centi-second granularity
| ||||
| CvrrpCurCfgVirtRtrPreDelay | 1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.18 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The pre-emptive delay interval in seconds. | ||||
| TvrrpNewCfgVirtRtrTable | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4 | NA | ||
table · not-accessible · current The table of VRRP virtual routers in the current configuration block. | ||||
| RvrrpNewCfgVirtRtrTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1 | NA | ||
| CvrrpNewCfgVirtRtrIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router table index. | ||||
| CvrrpNewCfgVirtRtrID | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.2 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The VRRP virtual router identifier. | ||||
| CvrrpNewCfgVirtRtrAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The VRRP virtual router IP address. | ||||
| CvrrpNewCfgVirtRtrIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpNewCfgVirtRtrInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.5 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The time interval between VRRP advertisements in seconds. When FAST_ADVERTISEMENT is enabled, this object indicates advertisement interval in centi-seconds | ||||
| CvrrpNewCfgVirtRtrPriority | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.6 | INTEGER (1..254) | RC | |
column · INTEGER (1..254) · read-create · current The priority value to be used by the specified VRRP virtual router. | ||||
| CvrrpNewCfgVirtRtrPreempt | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
| ||||
| CvrrpNewCfgVirtRtrDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
| ||||
| CvrrpNewCfgVirtRtrTckVirtRtr | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
| ||||
| CvrrpNewCfgVirtRtrTckIpIntf | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
| ||||
| CvrrpNewCfgVirtRtrTckVlanPort | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
| ||||
| CvrrpNewCfgVirtRtrState | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the VRRP virtual router.
| ||||
| CvrrpNewCfgVirtRtrFastAdvertisement | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current This object can be enabled if sub-second advertisement interval is required. When FAST_ADVERTISEMENT is enabled, - New message type FAST_ADVERTISEMENT(2) will be used in the VRRP advertisements - Can interop only with another FAST_ADVERTISEMENT enabled router - VRRP advertisement interval will be sent in units of centi-seconds - Timers will be running with centi-second granularity
| ||||
| CvrrpNewCfgVirtRtrPreDelay | 1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.19 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The pre-emptive delay interval in seconds. | ||||
| SvrrpIfTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.6.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in VRRP interface table. | ||||
| TvrrpCurCfgIfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.6.6 | NA | ||
table · not-accessible · current The table of VRRP interface in the current configuration block. | ||||
| RvrrpCurCfgIfTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.6.6.1 | NA | ||
| CvrrpCurCfgIfIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.6.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP interface index. This is eqivalent to IfIndex. | ||||
| CvrrpCurCfgIfAuthType | 1.3.6.1.4.1.20301.2.7.15.3.1.6.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication.
| ||||
| CvrrpCurCfgIfPasswd | 1.3.6.1.4.1.20301.2.7.15.3.1.6.6.1.3 | DisplayString (SIZE (0..7)) | RO | |
column · DisplayString (SIZE (0..7)) · read-only · current The password for authentication. | ||||
| TvrrpNewCfgIfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.6.7 | NA | ||
table · not-accessible · current The table of VRRP interface in the current configuration block. | ||||
| RvrrpNewCfgIfTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1 | NA | ||
| CvrrpNewCfgIfIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP interface index. This is eqivalent to IfIndex. | ||||
| CvrrpNewCfgIfAuthType | 1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication.
| ||||
| CvrrpNewCfgIfPasswd | 1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1.3 | DisplayString (SIZE (0..8)) | RC | |
column · DisplayString (SIZE (0..8)) · read-create · current The password for authentication. | ||||
| CvrrpNewCfgIfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
| ||||
| SvrrpVirtRtrGrpTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.6.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in VRRP Group table. | ||||
| TvrrpCurCfgVirtRtrGrpTable | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9 | NA | ||
table · not-accessible · current The table of VRRP virtual router group in the current configuration block. | ||||
| RvrrpCurCfgVirtRtrGrpTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1 | NA | ||
row · not-accessible · current Information about a VRRP failover virtual router. | ||||
| CvrrpCurCfgVirtRtrGrpIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router table index. | ||||
| CvrrpCurCfgVirtRtrGrpID | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.2 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The VRRP virtual router identifier. | ||||
| CvrrpCurCfgVirtRtrGrpIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpCurCfgVirtRtrGrpInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.4 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The time interval between VRRP advertisements in seconds. | ||||
| CvrrpCurCfgVirtRtrGrpPriority | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.5 | INTEGER (1..254) | RO | |
column · INTEGER (1..254) · read-only · current The priority value to be used by the specified VRRP virtual routers. | ||||
| CvrrpCurCfgVirtRtrGrpPreempt | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
| ||||
| CvrrpCurCfgVirtRtrGrpState | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the VRRP virtual router.
| ||||
| CvrrpCurCfgVirtRtrGrpTckIpIntf | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
| ||||
| CvrrpCurCfgVirtRtrGrpTckVlanPort | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
| ||||
| CvrrpCurCfgVirtRtrGrpFastAdvertisement | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides the status of FAST_ADVERTISEMENT. When FAST_ADVERTISEMENT is enabled, - New message type FAST_ADVERTISEMENT(2) will be used in the VRRP advertisements - Can interop only with another FAST_ADVERTISEMENT enabled router - VRRP advertisement interval will be sent in units of centi-seconds - Timers will be running with centi-second granularity
| ||||
| CvrrpCurCfgVirtRtrGrpPredelay | 1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.21 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The pre-emptive delay interval in seconds for specified VRRP virtual routers. | ||||
| TvrrpNewCfgVirtRtrGrpTable | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10 | NA | ||
table · not-accessible · current The table of VRRP virtual router group in the new configuration block. | ||||
| RvrrpNewCfgVirtRtrGrpTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1 | NA | ||
row · not-accessible · current Information about a VRRP failover virtual router. | ||||
| CvrrpNewCfgVirtRtrGrpIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router table index. | ||||
| CvrrpNewCfgVirtRtrGrpID | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.2 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The VRRP virtual router identifier. | ||||
| CvrrpNewCfgVirtRtrGrpIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpNewCfgVirtRtrGrpInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.4 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The time interval between VRRP advertisements in seconds. | ||||
| CvrrpNewCfgVirtRtrGrpPriority | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.5 | INTEGER (1..254) | RC | |
column · INTEGER (1..254) · read-create · current The priority value to be used by the specified VRRP virtual router. | ||||
| CvrrpNewCfgVirtRtrGrpPreempt | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
| ||||
| CvrrpNewCfgVirtRtrGrpState | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the VRRP virtual router.
| ||||
| CvrrpNewCfgVirtRtrGrpDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
| ||||
| CvrrpNewCfgVirtRtrGrpTckIpIntf | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
| ||||
| CvrrpNewCfgVirtRtrGrpTckVlanPort | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
| ||||
| CvrrpNewCfgVirtRtrGrpFastAdvertisement | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current This object can be enabled if sub-second advertisement interval is required. When FAST_ADVERTISEMENT is enabled, - New message type FAST_ADVERTISEMENT(2) will be used in the VRRP advertisements - Can interop only with another FAST_ADVERTISEMENT enabled router - VRRP advertisement interval will be sent in units of centi-seconds - Timers will be running with centi-second granularity
| ||||
| CvrrpNewCfgVirtRtrGrpPredelay | 1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.21 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The pre-emptive delay interval in seconds. | ||||
| NarpCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.7 | |||
| SarpCurCfgReARPPeriod | 1.3.6.1.4.1.20301.2.7.15.3.1.7.1 | INTEGER (2..120) | RO | |
scalar · INTEGER (2..120) · read-only · current Re-ARP Period in seconds. | ||||
| SarpNewCfgReARPPeriod | 1.3.6.1.4.1.20301.2.7.15.3.1.7.2 | INTEGER (2..120) | RW | |
scalar · INTEGER (2..120) · read-write · current Re-ARP Period in seconds. | ||||
| NipBootpCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.8 | |||
| SipCurCfgBootpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.8.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of BOOTP server. | ||||
| SipNewCfgBootpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.8.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of BOOTP server. | ||||
| SipCurCfgBootpAddr2 | 1.3.6.1.4.1.20301.2.7.15.3.1.8.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of second BOOTP server. | ||||
| SipNewCfgBootpAddr2 | 1.3.6.1.4.1.20301.2.7.15.3.1.8.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of second BOOTP server. | ||||
| SipCurCfgBootpState | 1.3.6.1.4.1.20301.2.7.15.3.1.8.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of BOOTP relay.
| ||||
| SipNewCfgBootpState | 1.3.6.1.4.1.20301.2.7.15.3.1.8.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The state of BOOTP relay.
| ||||
| TipCurCfgBootpGlobalServerTable | 1.3.6.1.4.1.20301.2.7.15.3.1.8.20 | NA | ||
table · not-accessible · current The table of global BOOTP server addresses | ||||
| RipCurCfgBootpGlobalServerEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.8.20.1 | NA | ||
row · not-accessible · current A row in the ipCurCfgBootpGlobalServerAddrTable | ||||
| CipCurCfgBootpGlobalServerIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.8.20.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of ipCurCfgBootpGlobalServerTable | ||||
| CipCurCfgBootpGlobalServerAddress | 1.3.6.1.4.1.20301.2.7.15.3.1.8.20.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The current global server IP. | ||||
| TipNewCfgBootpGlobalServerTable | 1.3.6.1.4.1.20301.2.7.15.3.1.8.21 | NA | ||
table · not-accessible · current The table of global BOOTP server addresses | ||||
| RipNewCfgBootpGlobalServerEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.8.21.1 | NA | ||
row · not-accessible · current A row in the ipNewCfgBootpGlobalServerAddrTable | ||||
| CipNewCfgBootpGlobalServerIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.8.21.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of ipCurCfgBootpGlobalServerTable | ||||
| CipNewCfgBootpGlobalServerAddress | 1.3.6.1.4.1.20301.2.7.15.3.1.8.21.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The current global server IP. | ||||
| TipCurCfgBootpBcastDomainTable | 1.3.6.1.4.1.20301.2.7.15.3.1.8.22 | NA | ||
table · not-accessible · current The table of broadcast domain settings | ||||
| RipCurCfgBootpBcastDomainEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.8.22.1 | NA | ||
| CipCurCfgBootpBcastDomainIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.8.22.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the broadcast domain entry | ||||
| CipCurCfgBootpBcastDomainVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.8.22.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN of the broadcast domain entry | ||||
| CipCurCfgBootpBcastDomainEnable | 1.3.6.1.4.1.20301.2.7.15.3.1.8.22.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the broadcast domain entry
| ||||
| TipNewCfgBootpBcastDomainTable | 1.3.6.1.4.1.20301.2.7.15.3.1.8.23 | NA | ||
table · not-accessible · current The table of broadcast domain settings | ||||
| RipNewCfgBootpBcastDomainEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1 | NA | ||
| CipNewCfgBootpBcastDomainIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the broadcast domain entry | ||||
| CipNewCfgBootpBcastDomainVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The VLAN of the broadcast domain entry | ||||
| CipNewCfgBootpBcastDomainEnable | 1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The state of the broadcast domain entry
| ||||
| CipNewCfgBootpBcastDomainAction | 1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the broadcast domain is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of broadcast domain.
| ||||
| TipCurCfgBootpBcastDomainServerTable | 1.3.6.1.4.1.20301.2.7.15.3.1.8.24 | NA | ||
table · not-accessible · current The table of broadcast domain servers | ||||
| RipCurCfgBootpBcastDomainServerEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.8.24.1 | NA | ||
row · not-accessible · current A row in the broadcast domain server table | ||||
| CipCurCfgBootpBcastDomainBDIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.8.24.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the broadcast domain entry in the server table | ||||
| CipCurCfgBootpBcastDomainServIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.8.24.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the server in the server table | ||||
| CipCurCfgBootpBcastDomainServerIP | 1.3.6.1.4.1.20301.2.7.15.3.1.8.24.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The current broadcast domain server IP. | ||||
| TipNewCfgBootpBcastDomainServerTable | 1.3.6.1.4.1.20301.2.7.15.3.1.8.25 | NA | ||
table · not-accessible · current The table of broadcast domain servers | ||||
| RipNewCfgBootpBcastDomainServerEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.8.25.1 | NA | ||
row · not-accessible · current A row in the broadcast domain server table | ||||
| CipNewCfgBootpBcastDomainBDIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.8.25.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the broadcast domain entry in the server table | ||||
| CipNewCfgBootpBcastDomainServIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.8.25.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the server in the server table | ||||
| CipNewCfgBootpBcastDomainServerIP | 1.3.6.1.4.1.20301.2.7.15.3.1.8.25.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The current broadcast domain server IP. | ||||
| SipCurCfgBootpOpt82State | 1.3.6.1.4.1.20301.2.7.15.3.1.8.26 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of Bootp relay option 82
| ||||
| SipNewCfgBootpOpt82State | 1.3.6.1.4.1.20301.2.7.15.3.1.8.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the stare of Bootp relay option 82
| ||||
| SipCurCfgBootpOpt82Policy | 1.3.6.1.4.1.20301.2.7.15.3.1.8.28 | INTEGER | RO | |
scalar · INTEGER · read-only · current The policy of Bootp relay option 82
| ||||
| SipNewCfgBootpOpt82Policy | 1.3.6.1.4.1.20301.2.7.15.3.1.8.29 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the policy of Bootp relay option 82
| ||||
| NdnsCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.9 | |||
| SdnsCurCfgPrimaryIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.9.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current The DNS primary IP address in the current configuration block. | ||||
| SdnsNewCfgPrimaryIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.9.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current The DNS primary IP address in the new configuration block. | ||||
| SdnsCurCfgSecondaryIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.9.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The DNS primary IP address in the current configuration block. | ||||
| SdnsNewCfgSecondaryIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.9.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current The DNS primary IP address in the new configuration block. | ||||
| SdnsCurCfgDomainName | 1.3.6.1.4.1.20301.2.7.15.3.1.9.5 | DisplayString (SIZE (0..191)) | RO | |
scalar · DisplayString (SIZE (0..191)) · read-only · current The DNS doamin name in the current configuration block. | ||||
| SdnsNewCfgDomainName | 1.3.6.1.4.1.20301.2.7.15.3.1.9.6 | DisplayString (SIZE (0..191)) | RW | |
scalar · DisplayString (SIZE (0..191)) · read-write · current The DNS doamin name in the new configuration block. | ||||
| SdnsNewCfgFirstRequestAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.9.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Type of the first request to dns
| ||||
| SdnsCurCfgFirstRequestAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.9.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current Type of the first request to dns
| ||||
| SdnsCurCfgPriServerPort | 1.3.6.1.4.1.20301.2.7.15.3.1.9.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Choose the port that the primary server is connected to.
| ||||
| SdnsNewCfgPriServerPort | 1.3.6.1.4.1.20301.2.7.15.3.1.9.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Choose the port that the primary server is connected to.
| ||||
| SdnsCurCfgSecServerPort | 1.3.6.1.4.1.20301.2.7.15.3.1.9.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current Choose the port that the secondary server is connected to.
| ||||
| SdnsNewCfgSecServerPort | 1.3.6.1.4.1.20301.2.7.15.3.1.9.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Choose the port that the secondary server is connected to.
| ||||
| NipNwfCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.10 | |||
| SipNwfTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.10.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP network filter table. | ||||
| TipCurCfgNwfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.10.2 | NA | ||
table · not-accessible · current The table of IP network filter in the current configuration block. | ||||
| RipCurCfgNwfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1 | NA | ||
| CipCurCfgNwfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The netowrk filter number for which the NWF is related. | ||||
| CipCurCfgNwfAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the network filter. | ||||
| CipCurCfgNwfMask | 1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP network filter mask. | ||||
| CipCurCfgNwfState | 1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the network filter.
| ||||
| TipNewCfgNwfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.10.3 | NA | ||
table · not-accessible · current The table of IP network filter in the current configuration block. | ||||
| RipNewCfgNwfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1 | NA | ||
| CipNewCfgNwfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The netowrk filter number for which the NWF is related. | ||||
| CipNewCfgNwfAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the network filter. | ||||
| CipNewCfgNwfMask | 1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The IP network filter mask. | ||||
| CipNewCfgNwfState | 1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the network filter.
| ||||
| CipNewCfgNwfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| NipRmapCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.11 | |||
| SipRmapTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.11.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP route map table. | ||||
| TipCurCfgRmapTable | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2 | NA | ||
table · not-accessible · current The table of IP route map in the current configuration block. | ||||
| RipCurCfgRmapEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1 | NA | ||
| CipCurCfgRmapIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipCurCfgRmapLp | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.2 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The local-preference of the route map. 4294967295 means none | ||||
| CipCurCfgRmapMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.3 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current The metric of the route map. 4294967295 means none. Range is [1-16777214] if OSPF metric-type is used. | ||||
| CipCurCfgRmapPrec | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.4 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The precedence of the route map. | ||||
| CipCurCfgRmapWeight | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.5 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The weight of the route map. 65535 means none | ||||
| CipCurCfgRmapState | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the route map.
| ||||
| CipCurCfgRmapAp | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.7 | DisplayString (SIZE (0..17)) | RO | |
column · DisplayString (SIZE (0..17)) · read-only · current The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is:<AS number> [<AS number>][ <AS number>] | ||||
| CipCurCfgRmapMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The OSPF metric-type of the matched route.
| ||||
| CipCurCfgRmapNexthop | 1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Peer address as nexthop of the matched route(only for BGP).
| ||||
| TipNewCfgRmapTable | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3 | NA | ||
table · not-accessible · current The table of IP route map in the new configuration block. | ||||
| RipNewCfgRmapEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1 | NA | ||
| CipNewCfgRmapIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipNewCfgRmapLp | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.2 | Unsigned32 (0..4294967295) | RC | |
column · Unsigned32 (0..4294967295) · read-create · current The local-preference of the route map. 4294967295 means none | ||||
| CipNewCfgRmapMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.3 | Unsigned32 (1..4294967295) | RC | |
column · Unsigned32 (1..4294967295) · read-create · current The metric of the route map. 4294967295 means none. Range is [1-16777214] if OSPF metric-type is used. | ||||
| CipNewCfgRmapPrec | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.4 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The precedence of the route map. | ||||
| CipNewCfgRmapWeight | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.5 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The weight of the route map. 65535 means none | ||||
| CipNewCfgRmapState | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the route map.
| ||||
| CipNewCfgRmapAp | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.7 | DisplayString (SIZE (0..17)) | RC | |
column · DisplayString (SIZE (0..17)) · read-create · current The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is:<AS number> [<AS number>][ <AS number>] | ||||
| CipNewCfgRmapMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The OSPF metric-type of the matched route.
| ||||
| CipNewCfgRmapDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CipNewCfgRmapNexthop | 1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Peer address as nexthop of the matched route(only for BGP).
| ||||
| SipAlistTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.11.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP route map table. | ||||
| TipCurCfgAlistTable | 1.3.6.1.4.1.20301.2.7.15.3.1.11.5 | NA | ||
table · not-accessible · current The table of IP route map access list in the current configuration block. | ||||
| RipCurCfgAlistEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1 | NA | ||
row · not-accessible · current Information about an IP route map. | ||||
| CipCurCfgAlistRmapIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipCurCfgAlistIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The access list number for which the access list is related. | ||||
| CipCurCfgAlistNwf | 1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.3 | INTEGER (0..256) | RO | |
column · INTEGER (0..256) · read-only · current The network filter number of the route map access list. 0 means none | ||||
| CipCurCfgAlistMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.4 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current The metric of the route map access list. 4294967295 means none | ||||
| CipCurCfgAlistAction | 1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Action of the route map access list.
| ||||
| CipCurCfgAlistState | 1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the route map access list.
| ||||
| TipNewCfgAlistTable | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6 | NA | ||
table · not-accessible · current The table of IP route map access list in the current configuration block. | ||||
| RipNewCfgAlistEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1 | NA | ||
row · not-accessible · current Information about an IP route map. | ||||
| CipNewCfgAlistRmapIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipNewCfgAlistIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The access list number for which the access list is related. | ||||
| CipNewCfgAlistNwf | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.3 | INTEGER (1..256) | RC | |
column · INTEGER (1..256) · read-create · current The network filter number of the route map access list. 0 means none | ||||
| CipNewCfgAlistMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.4 | Unsigned32 (1..4294967295) | RC | |
column · Unsigned32 (1..4294967295) · read-create · current The metric of the route map access list. 4294967295 means none | ||||
| CipNewCfgAlistAction | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Action of the route map access list.
| ||||
| CipNewCfgAlistState | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the route map access list.
| ||||
| CipNewCfgAlistDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| SipAspathTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.11.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP route map table. | ||||
| TipCurCfgAspathTable | 1.3.6.1.4.1.20301.2.7.15.3.1.11.8 | NA | ||
table · not-accessible · current The table of IP route map access path configuration. | ||||
| RipCurCfgAspathEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1 | NA | ||
row · not-accessible · current Information about an IP route map. | ||||
| CipCurCfgAspathRmapIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipCurCfgAspathIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The access path number for which the access list is related. | ||||
| CipCurCfgAspathAS | 1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.3 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The AS number of the route map access path. 0 means none | ||||
| CipCurCfgAspathAction | 1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Action of the route map access path.
| ||||
| CipCurCfgAspathState | 1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the route map access path.
| ||||
| TipNewCfgAspathTable | 1.3.6.1.4.1.20301.2.7.15.3.1.11.9 | NA | ||
table · not-accessible · current The table of IP route map access path configuration | ||||
| RipNewCfgAspathEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1 | NA | ||
row · not-accessible · current Information about an IP route map. | ||||
| CipNewCfgAspathRmapIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipNewCfgAspathIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The access path number for which the access list is related. | ||||
| CipNewCfgAspathAS | 1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.3 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The AS number of the route map access path. 0 means none | ||||
| CipNewCfgAspathAction | 1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Action of the route map access path.
| ||||
| CipNewCfgAspathState | 1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the route map access path.
| ||||
| CipNewCfgAspathDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| NbgpCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.12 | |||
| NbgpGeneral | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1 | |||
| SbgpCurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current BGP global state.
| ||||
| SbgpNewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn BGP on or off.
| ||||
| SbgpCurCfgLocalPref | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.3 | Unsigned32 (0..4294967294) | RO | |
scalar · Unsigned32 (0..4294967294) · read-only · current Local preference value. | ||||
| SbgpNewCfgLocalPref | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.4 | Unsigned32 (0..4294967294) | RW | |
scalar · Unsigned32 (0..4294967294) · read-write · current Local Preference value. | ||||
| SbgpCurCfgASNumber | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.5 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current The autonomous system (AS) number. | ||||
| SbgpNewCfgASNumber | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.6 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The autonomous system (AS) number. | ||||
| SbgpCurCfgEbgpMaxPaths | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.7 | Unsigned32 (0..4294967294) | RO | |
scalar · Unsigned32 (0..4294967294) · read-only · current Maximum eBGP Paths. | ||||
| SbgpNewCfgEbgpMaxPaths | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.8 | Unsigned32 (0..4294967294) | RW | |
scalar · Unsigned32 (0..4294967294) · read-write · current Maximum eBGP Paths. | ||||
| SbgpCurCfgIbgpMaxPaths | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.9 | Unsigned32 (0..4294967294) | RO | |
scalar · Unsigned32 (0..4294967294) · read-only · current Maximum iBGP Paths. | ||||
| SbgpNewCfgIbgpMaxPaths | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.10 | Unsigned32 (0..4294967294) | RW | |
scalar · Unsigned32 (0..4294967294) · read-write · current Maximum iBGP Paths. | ||||
| SbgpCurCfgAsn4Comp | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current ASN4 to ASN2 compatibility.
| ||||
| SbgpNewCfgAsn4Comp | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current ASN4 to ASN2 compatibility.
| ||||
| SbgpCurCfgDscp | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.13 | INTEGER (0..63) | RO | |
scalar · INTEGER (0..63) · read-only · current BGP dscp marking value. | ||||
| SbgpNewCfgDscp | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.14 | INTEGER (0..63) | RW | |
scalar · INTEGER (0..63) · read-write · current BGP dscp marking value. | ||||
| SbgpNewCfgClusterId | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.15 | IpAddress | RW | |
scalar · IpAddress · read-write · current Cluster ID. | ||||
| SbgpCurCfgClusterId | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.16 | IpAddress | RO | |
scalar · IpAddress · read-only · current Cluster ID. | ||||
| SbgpNewCfgClientToClientReflection | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable client to client route reflection
| ||||
| SbgpCurCfgClientToClientReflection | 1.3.6.1.4.1.20301.2.7.15.3.1.12.1.18 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable client to client route reflection
| ||||
| SbgpPeerTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.12.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the BGP peer table. | ||||
| TbgpCurCfgPeerTable | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3 | NA | ||
table · not-accessible · current The table of BGP peer in the current configuration block. | ||||
| RbgpCurCfgPeerEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1 | NA | ||
| CbgpCurCfgPeerIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP peer number for which the BGP peer table is related. | ||||
| CbgpCurCfgPeerRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The remote IP address of the BGP peer. | ||||
| CbgpCurCfgPeerRemoteAs | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.3 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The remote AS number of the BGP peer. 0 means none | ||||
| CbgpCurCfgPeerTtl | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.4 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The time-to-live value of the BGP peer IP datagram. 0 means none. | ||||
| CbgpCurCfgPeerState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the peer.
| ||||
| CbgpCurCfgPeerMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.10 | Unsigned32 (0..4294967294) | RO | |
column · Unsigned32 (0..4294967294) · read-only · current The metric value of the BGP peer. A value of '0' means none | ||||
| CbgpCurCfgPeerDefaultAction | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The value of default route action.
| ||||
| CbgpCurCfgPeerOspfState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable advertising OSPF routes.
| ||||
| CbgpCurCfgPeerFixedState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable advertising fixed routes.
| ||||
| CbgpCurCfgPeerStaticState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable advertising static routes.
| ||||
| CbgpCurCfgPeerInRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.16 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The route maps present in the in route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| CbgpCurCfgPeerOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| CbgpCurCfgPeerHold | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.18 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The hold time | ||||
| CbgpCurCfgPeerAlive | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.19 | INTEGER (0..21845) | RO | |
column · INTEGER (0..21845) · read-only · current The keep alive time | ||||
| CbgpCurCfgPeerAdvert | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.20 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The min time between advertisements | ||||
| CbgpCurCfgPeerRetry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.21 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The connect retry interval | ||||
| CbgpCurCfgPeerOrig | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.22 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The min time between route originations | ||||
| CbgpCurCfgPeerRipState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable advertising RIP routes
| ||||
| CbgpCurCfgPeerPassword | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.24 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current Peer BGP password | ||||
| CbgpCurCfgPeerPassive | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable BGP passive peer
| ||||
| CbgpCurCfgPeerUpdateSrcIf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current BGP peer update source interface index | ||||
| CbgpCurCfgPeerUpdateSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current BGP peer update source loopback interface index | ||||
| CbgpCurCfgPeerTtlSecHops | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.32 | INTEGER (0..254) | RO | |
column · INTEGER (0..254) · read-only · current The BGP ttl security hops. 0 means none. | ||||
| CbgpCurCfgPeerNexthopSelf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/Disable using this router as next-hop in BGP updates.
| ||||
| CbgpCurCfgPeerClient | 1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable BGP client peer
| ||||
| TbgpNewCfgPeerTable | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4 | NA | ||
table · not-accessible · current The table of BGP peer in the new configuration block. | ||||
| RbgpNewCfgPeerEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1 | NA | ||
| CbgpNewCfgPeerIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP peer number for which the BGP peer table is related. | ||||
| CbgpNewCfgPeerRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The remote IP address of the BGP peer. | ||||
| CbgpNewCfgPeerRemoteAs | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.3 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The remote AS number of the BGP peer. 0 means none | ||||
| CbgpNewCfgPeerTtl | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.4 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The time-to-live value of the BGP peer IP datagram. 0 means none. | ||||
| CbgpNewCfgPeerState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the peer.
| ||||
| CbgpNewCfgPeerDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CbgpNewCfgPeerMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.10 | Unsigned32 (0..4294967294) | RC | |
column · Unsigned32 (0..4294967294) · read-create · current The metric value of the BGP peer. A value of '0' means none | ||||
| CbgpNewCfgPeerDefaultAction | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current The value of default route action.
| ||||
| CbgpNewCfgPeerOspfState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable advertising OSPF routes.
| ||||
| CbgpNewCfgPeerFixedState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable advertising fixed routes.
| ||||
| CbgpNewCfgPeerStaticState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable advertising static routes.
| ||||
| CbgpNewCfgPeerInRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.16 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The route maps present in the in route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| CbgpNewCfgPeerOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| CbgpNewCfgPeerAddInRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.18 | Integer32 | RC | |
column · Integer32 · read-create · current The route map to be add into in-rmap list. When read, 0 is returned. | ||||
| CbgpNewCfgPeerAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.19 | Integer32 | RC | |
column · Integer32 · read-create · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| CbgpNewCfgPeerRemoveInRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.20 | Integer32 | RC | |
column · Integer32 · read-create · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| CbgpNewCfgPeerRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.21 | Integer32 | RC | |
column · Integer32 · read-create · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| CbgpNewCfgPeerHold | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.22 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The hold time | ||||
| CbgpNewCfgPeerAlive | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.23 | INTEGER (0..21845) | RC | |
column · INTEGER (0..21845) · read-create · current The keep alive time | ||||
| CbgpNewCfgPeerAdvert | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.24 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The min time between advertisements | ||||
| CbgpNewCfgPeerRetry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.25 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The connect retry interval | ||||
| CbgpNewCfgPeerOrig | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.26 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The min time between route originations | ||||
| CbgpNewCfgPeerRipState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.27 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable advertising RIP routes
| ||||
| CbgpNewCfgPeerPassword | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.28 | DisplayString (SIZE (0..16)) | RC | |
column · DisplayString (SIZE (0..16)) · read-create · current Peer BGP password | ||||
| CbgpNewCfgPeerPassive | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.29 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable BGP passive peer
| ||||
| CbgpNewCfgPeerUpdateSrcIf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.30 | INTEGER | RC | |
column · INTEGER · read-create · current BGP peer update source interface index | ||||
| CbgpNewCfgPeerUpdateSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.31 | INTEGER | RC | |
column · INTEGER · read-create · current BGP peer update source loopback interface index | ||||
| CbgpNewCfgPeerTtlSecHops | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.32 | INTEGER (0..254) | RC | |
column · INTEGER (0..254) · read-create · current The BGP ttl security hops. 0 means none. | ||||
| CbgpNewCfgPeerNexthopSelf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.33 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/Disable using this router as next-hop in BGP updates.
| ||||
| CbgpNewCfgPeerClient | 1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.34 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable BGP client peer
| ||||
| SbgpAggrTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.12.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the BGP aggregation table. | ||||
| TbgpCurCfgAggrTable | 1.3.6.1.4.1.20301.2.7.15.3.1.12.6 | NA | ||
table · not-accessible · current The table of BGP aggregation configuration. | ||||
| RbgpCurCfgAggrEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1 | NA | ||
| CbgpCurCfgAggrIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The aggregation number for which the BGP aggregation is related. | ||||
| CbgpCurCfgAggrAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the BGP aggregation. | ||||
| CbgpCurCfgAggrMask | 1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask of the BGP aggregation. | ||||
| CbgpCurCfgAggrState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the BGP aggregation.
| ||||
| TbgpNewCfgAggrTable | 1.3.6.1.4.1.20301.2.7.15.3.1.12.7 | NA | ||
table · not-accessible · current The table of BGP aggregation configuration. | ||||
| RbgpNewCfgAggrEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1 | NA | ||
| CbgpNewCfgAggrIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The aggregation number for which the BGP aggregation is related. | ||||
| CbgpNewCfgAggrAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the BGP aggregation. | ||||
| CbgpNewCfgAggrMask | 1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet mask of the BGP aggregation. | ||||
| CbgpNewCfgAggrState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the BGP aggregation.
| ||||
| CbgpNewCfgAggrDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| SbgpGroupTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.12.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of groups in the BGP groups table. | ||||
| TbgpCurCfgGroupTable | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9 | NA | ||
table · not-accessible · current The table of BGP group in the current configuration block. | ||||
| RbgpCurCfgGroupEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1 | NA | ||
| CbgpCurCfgGroupIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP group number for which the BGP group table is related. | ||||
| CbgpCurCfgGroupName | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The group name. | ||||
| CbgpCurCfgGroupRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the BGP group. | ||||
| CbgpCurCfgGroupRemoteMask | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask of the BGP group. | ||||
| CbgpCurCfgGroupLimit | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.5 | INTEGER (1..96) | RO | |
column · INTEGER (1..96) · read-only · current The maximum number of BGP dynamic peers. | ||||
| CbgpCurCfgGroupUpdateSrcIf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current BGP group update source interface index | ||||
| CbgpCurCfgGroupUpdateSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current BGP group update source loopback interface index | ||||
| CbgpCurCfgGroupHold | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.8 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The hold time | ||||
| CbgpCurCfgGroupAlive | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.9 | INTEGER (0..21845) | RO | |
column · INTEGER (0..21845) · read-only · current The keep alive time | ||||
| CbgpCurCfgGroupAdvert | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.10 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The min time between advertisements | ||||
| CbgpCurCfgGroupOrig | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.11 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The min time between route originations | ||||
| CbgpCurCfgGroupMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.12 | Unsigned32 (0..4294967294) | RO | |
column · Unsigned32 (0..4294967294) · read-only · current The metric value of the BGP group. A value of '0' means none | ||||
| CbgpCurCfgGroupTtl | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.13 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The time-to-live value of the BGP peer IP datagram. 0 means none. | ||||
| CbgpCurCfgGroupDefaultAction | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current The value of default route action.
| ||||
| CbgpCurCfgGroupOspfState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable advertising OSPF routes.
| ||||
| CbgpCurCfgGroupRipState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable advertising RIP routes
| ||||
| CbgpCurCfgGroupFixedState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable advertising fixed routes.
| ||||
| CbgpCurCfgGroupStaticState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable advertising static routes.
| ||||
| CbgpCurCfgGroupInRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.19 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected | ||||
| CbgpCurCfgGroupOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.20 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected | ||||
| CbgpCurCfgGroupPassword | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.21 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current Peer BGP password | ||||
| CbgpCurCfgGroupState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the group.
| ||||
| CbgpCurCfgGroupTtlSecHops | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.23 | INTEGER (0..254) | RO | |
column · INTEGER (0..254) · read-only · current The BGP ttl security hops. 0 means none. | ||||
| CbgpCurCfgGroupNexthopSelf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/Disable using this router as next-hop in BGP updates.
| ||||
| CbgpCurCfgGroupClient | 1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/Disable Route Reflector for this client.
| ||||
| TbgpNewCfgGroupTable | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10 | NA | ||
table · not-accessible · current The table of BGP group in the new configuration block. | ||||
| RbgpNewCfgGroupEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1 | NA | ||
| CbgpNewCfgGroupIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current The BGP group number for which the BGP group table is related. | ||||
| CbgpNewCfgGroupName | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.2 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current The group name. | ||||
| CbgpNewCfgGroupRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the BGP group. | ||||
| CbgpNewCfgGroupRemoteMask | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet mask of the BGP group. | ||||
| CbgpNewCfgGroupLimit | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.5 | INTEGER (1..96) | RC | |
column · INTEGER (1..96) · read-create · current The maximum number of BGP dynamic peers. | ||||
| CbgpNewCfgGroupUpdateSrcIf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current BGP group update source interface index | ||||
| CbgpNewCfgGroupUpdateSrcLoopIf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current BGP group update source loopback interface index | ||||
| CbgpNewCfgGroupHold | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.8 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The hold time | ||||
| CbgpNewCfgGroupAlive | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.9 | INTEGER (0..21845) | RC | |
column · INTEGER (0..21845) · read-create · current The keep alive time | ||||
| CbgpNewCfgGroupAdvert | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.10 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The min time between advertisements | ||||
| CbgpNewCfgGroupOrig | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.11 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The min time between route originations | ||||
| CbgpNewCfgGroupMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.12 | Unsigned32 (0..4294967294) | RC | |
column · Unsigned32 (0..4294967294) · read-create · current The metric value of the BGP group. A value of '0' means none | ||||
| CbgpNewCfgGroupTtl | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.13 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The time-to-live value of the BGP peer IP datagram. 0 means none. | ||||
| CbgpNewCfgGroupDefaultAction | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current The value of default route action.
| ||||
| CbgpNewCfgGroupOspfState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable advertising OSPF routes.
| ||||
| CbgpNewCfgGroupRipState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable advertising RIP routes
| ||||
| CbgpNewCfgGroupFixedState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable advertising fixed routes.
| ||||
| CbgpNewCfgGroupStaticState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable advertising static routes.
| ||||
| CbgpNewCfgGroupInRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.19 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected | ||||
| CbgpNewCfgGroupOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.20 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected | ||||
| CbgpNewCfgGroupAddInRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.21 | Integer32 | RC | |
column · Integer32 · read-create · current The route map to be add into in-rmap list. When read, 0 is returned. | ||||
| CbgpNewCfgGroupAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.22 | Integer32 | RC | |
column · Integer32 · read-create · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| CbgpNewCfgGroupRemoveInRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.23 | Integer32 | RC | |
column · Integer32 · read-create · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| CbgpNewCfgGroupRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.24 | Integer32 | RC | |
column · Integer32 · read-create · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| CbgpNewCfgGroupPassword | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.25 | DisplayString (SIZE (0..16)) | RC | |
column · DisplayString (SIZE (0..16)) · read-create · current Peer BGP password | ||||
| CbgpNewCfgGroupDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.26 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CbgpNewCfgGroupState | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.27 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the group.
| ||||
| CbgpNewCfgGroupTtlSecHops | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.28 | INTEGER (0..254) | RC | |
column · INTEGER (0..254) · read-create · current The BGP ttl security hops. 0 means none. | ||||
| CbgpNewCfgGroupNexthopSelf | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.29 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/Disable using this router as next-hop in BGP updates.
| ||||
| CbgpNewCfgGroupClient | 1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.30 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/Disable Route Reflector for this client.
| ||||
| TbgpCurCfgGroupRASTable | 1.3.6.1.4.1.20301.2.7.15.3.1.12.11 | NA | ||
table · not-accessible · current The table of BGP group RASs in the current configuration block. | ||||
| RbgpCurCfgGroupRASEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.11.1 | NA | ||
row · not-accessible · current Information about a BGP group RAS. | ||||
| CbgpCurCfgGroupRASIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.12.11.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP remote-as number for which the BGP RAS table is related. | ||||
| CbgpCurCfgGroupRAS | 1.3.6.1.4.1.20301.2.7.15.3.1.12.11.1.2 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The remote AS number of the BGP group bgpCurCfgGroupIndex. 0 means none | ||||
| TbgpNewCfgGroupRASTable | 1.3.6.1.4.1.20301.2.7.15.3.1.12.12 | NA | ||
table · not-accessible · current The table of BGP group RASs in the new configuration block. | ||||
| RbgpNewCfgGroupRASEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.12.12.1 | NA | ||
row · not-accessible · current Information about a BGP group RAS. | ||||
| CbgpNewCfgGroupRASIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.12.12.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP group RAS number for which the BGP group RASs table is related. | ||||
| CbgpNewCfgGroupRAS | 1.3.6.1.4.1.20301.2.7.15.3.1.12.12.1.2 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The remote AS number of the BGP group bgpNewCfgGroupIndex. 0 means none | ||||
| NospfCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.13 | |||
| NospfGeneral | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1 | |||
| SospfCurCfgDefaultRouteMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current Specify the metric to be assigned. | ||||
| SospfNewCfgDefaultRouteMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current Specify the metric to be assigned. | ||||
| SospfCurCfgDefaultRouteMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify the AS External metric type to be assigned.
| ||||
| SospfNewCfgDefaultRouteMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify the AS External metric type to be assigned.
| ||||
| SospfIntfTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Interface table. | ||||
| SospfAreaTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Area table. | ||||
| SospfRangeTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Range table. | ||||
| SospfVirtIntfTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Virtual Interface table. | ||||
| SospfHostTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Host table. | ||||
| SospfCurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPF global state.
| ||||
| SospfNewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn OSPF on or off.
| ||||
| SospfCurCfgLSDB | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The LSDB limit for external LSA. | ||||
| SospfNewCfgLSDB | 1.3.6.1.4.1.20301.2.7.15.3.1.13.1.13 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set the LSDB limit for external LSA. | ||||
| TospfCurCfgAreaTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2 | NA | ||
table · not-accessible · current The table of OSPF area in the current configuration block. | ||||
| RospfCurCfgAreaEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1 | NA | ||
| CospfCurCfgAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF area number for which the OSPF area table is related. | ||||
| CospfCurCfgAreaId | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF area. | ||||
| CospfCurCfgAreaSpfInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.3 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The SPF interval for the OSPF area. | ||||
| CospfCurCfgAreaAuthType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
| ||||
| CospfCurCfgAreaType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Type of Area. transit(0) stub(1) nssa(2)
| ||||
| CospfCurCfgAreaMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Metric (1-65535) | ||||
| CospfCurCfgAreaStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0) enabled(1)
| ||||
| TospfNewCfgAreaTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3 | NA | ||
table · not-accessible · current The table of OSPF area in the new configuration block. | ||||
| RospfNewCfgAreaEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1 | NA | ||
| CospfNewCfgAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF area number for which the OSPF area table is related. | ||||
| CospfNewCfgAreaId | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the OSPF area. | ||||
| CospfNewCfgAreaSpfInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.3 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The SPF interval for the OSPF area. | ||||
| CospfNewCfgAreaAuthType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Type of authentication being used.
none(1) - no authentication
password(2) - use password.
md5(3) - use MD5 authentication.
| ||||
| CospfNewCfgAreaType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Type of Area. transit(0) stub(1) nssa(2)
| ||||
| CospfNewCfgAreaMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.6 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current Metric (1-65535) | ||||
| CospfNewCfgAreaStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Status disabled(0) enabled(1)
| ||||
| CospfNewCfgAreaDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the area
no(0),
yes(1)
| ||||
| NospfRouteRedistribution | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4 | |||
| NospfRedistributeStatic | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1 | |||
| SospfCurCfgStaticMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The metric to be assigned to static routes. | ||||
| SospfNewCfgStaticMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current The metric to be assigned to static routes. | ||||
| SospfCurCfgStaticMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for static routes.
| ||||
| SospfNewCfgStaticMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for static routes.
| ||||
| SospfCurCfgStaticOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgStaticOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgStaticAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SospfNewCfgStaticRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NospfRedistributeEbgp | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2 | |||
| SospfCurCfgEbgpMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The export metric to be assigned to External BGP routes. | ||||
| SospfNewCfgEbgpMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current The export metric to be assigned to External BGP routes. | ||||
| SospfCurCfgEbgpMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for External BGP routes.
| ||||
| SospfNewCfgEbgpMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for External BGP routes.
| ||||
| SospfCurCfgEbgpOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgEbgpOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgEbgpAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SospfNewCfgEbgpRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NospfRedistributeIbgp | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3 | |||
| SospfCurCfgIbgpMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The export metric for Internal BGP routes. | ||||
| SospfNewCfgIbgpMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current The export metric for Internal BGP routes. | ||||
| SospfCurCfgIbgpMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for Internal BGP routes.
| ||||
| SospfNewCfgIbgpMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for Internal BGP routes.
| ||||
| SospfCurCfgIbgpOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgIbgpOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgIbgpAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SospfNewCfgIbgpRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NospfRedistributeFixed | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4 | |||
| SospfCurCfgFixedMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The export metric for fixed routes. | ||||
| SospfNewCfgFixedMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current The export metric for fixed routes. | ||||
| SospfCurCfgFixedMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for fixed routes.
| ||||
| SospfNewCfgFixedMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for fixed routes.
| ||||
| SospfCurCfgFixedOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgFixedOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgFixedAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SospfNewCfgFixedRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NospfRedistributeRip | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5 | |||
| SospfCurCfgRipMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The export metric for RIP routes. | ||||
| SospfNewCfgRipMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current The export metric for RIP routes. | ||||
| SospfCurCfgRipMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for RIP routes.
| ||||
| SospfNewCfgRipMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for RIP routes.
| ||||
| SospfCurCfgRipOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgRipOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgRipAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SospfNewCfgRipRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| TospfCurCfgMdkeyTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.5 | NA | ||
table · not-accessible · current The table of OSPF MD5 keys in the current configuration block. | ||||
| RospfCurCfgMdkeyEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.5.1 | NA | ||
| CospfCurCfgMdkeyIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF MD5 Key number for which the OSPF MdKey table is related. | ||||
| CospfCurCfgMdkeyKey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.5.1.2 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current The character string representing the MD5 Key. | ||||
| TospfNewCfgMdkeyTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.6 | NA | ||
table · not-accessible · current The table of OSPF MD5 keys in the new configuration block. | ||||
| RospfNewCfgMdkeyEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.6.1 | NA | ||
| CospfNewCfgMdkeyIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF MD5 Key number for which the OSPF MdKey table is related. | ||||
| CospfNewCfgMdkeyKey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.6.1.2 | DisplayString (SIZE (0..16)) | RC | |
column · DisplayString (SIZE (0..16)) · read-create · current The character string representing the MD5 Key. | ||||
| CospfNewCfgMdkeyDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.13.6.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| TospfCurCfgIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7 | NA | ||
table · not-accessible · current The table of OSPF Interface in the current configuration block. | ||||
| RospfCurCfgIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1 | NA | ||
| CospfCurCfgIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Interface number for which the OSPF Interface table is related. | ||||
| CospfCurCfgIntfArea | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.2 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the area that the interface belongs (0..2) | ||||
| CospfCurCfgIntfMdkey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.3 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The MD5 key for the OSPF interface 0 (none) no MD5 authentication. | ||||
| CospfCurCfgIntfCost | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Interface cost | ||||
| CospfCurCfgIntfPrio | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.5 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Interface router priority | ||||
| CospfCurCfgIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval | ||||
| CospfCurCfgIntfHelloMS | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
| ||||
| CospfCurCfgIntfDead | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.8 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval | ||||
| CospfCurCfgIntfDeadMS | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
| ||||
| CospfCurCfgIntfTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.10 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Transit delay | ||||
| CospfCurCfgIntfRetra | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.11 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval | ||||
| CospfCurCfgIntfAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.12 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Authentication Key | ||||
| CospfCurCfgIntfPassive | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Passive interface
disabled(0),
enabled(1)
| ||||
| CospfCurCfgIntfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the interface
disabled(0),
enabled(1)
| ||||
| CospfCurCfgIntfPtop | 1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Point-to-point interface
disabled(0),
enabled(1)
| ||||
| TospfNewCfgIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8 | NA | ||
table · not-accessible · current The table of OSPF interface in the new configuration block. | ||||
| RospfNewCfgIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1 | NA | ||
| CospfNewCfgIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Interface number for which the OSPF Interface table is related. | ||||
| CospfNewCfgIntfArea | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.2 | INTEGER (0..2) | RC | |
column · INTEGER (0..2) · read-create · current The index of the area that the interface belongs (0..2) | ||||
| CospfNewCfgIntfMdkey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.3 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The MD5 key for the OSPF interface 0 (none) no MD5 authentication. | ||||
| CospfNewCfgIntfCost | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.4 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Interface cost(1..65535) | ||||
| CospfNewCfgIntfPrio | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.5 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current Interface router priority(0..255) | ||||
| CospfNewCfgIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.6 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Hello interval(1..65535s | 50..65535ms) | ||||
| CospfNewCfgIntfHelloMS | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
| ||||
| CospfNewCfgIntfDead | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.8 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Dead interval(1..65535s |1000..65535ms) | ||||
| CospfNewCfgIntfDeadMS | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
| ||||
| CospfNewCfgIntfTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.10 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Transit delay(1..3600) | ||||
| CospfNewCfgIntfRetra | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.11 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Retransmit interval(1..3600) | ||||
| CospfNewCfgIntfAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.12 | DisplayString (SIZE (0..8)) | RC | |
column · DisplayString (SIZE (0..8)) · read-create · current Authentication Key | ||||
| CospfNewCfgIntfPassive | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Passive interface
disabled(0),
enabled(1)
| ||||
| CospfNewCfgIntfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the interface
disabled(0),
enabled(1)
| ||||
| CospfNewCfgIntfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the interface other(0), delete(1)
| ||||
| CospfNewCfgIntfPtop | 1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Point-to-point interface
disabled(0),
enabled(1)
| ||||
| TospfCurCfgVirtIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9 | NA | ||
table · not-accessible · current The table of OSPF Virtual Interface configuration in the current configuration. | ||||
| RospfCurCfgVirtIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1 | NA | ||
row · not-accessible · current Information about an OSPF virtual Interface. | ||||
| CospfCurCfgVirtIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related. | ||||
| CospfCurCfgVirtIntfAreaId | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.2 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the OSPF area to which this virtual interface belongs. | ||||
| CospfCurCfgVirtIntfNbr | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF neighbor for this virtual interface. | ||||
| CospfCurCfgVirtIntfMdkey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.4 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication. | ||||
| CospfCurCfgVirtIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval | ||||
| CospfCurCfgVirtIntfHelloMS | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Hello interval seconds(0), milliseconds(1)
| ||||
| CospfCurCfgVirtIntfDead | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.7 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval | ||||
| CospfCurCfgVirtIntfDeadMS | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Dead interval seconds(0), milliseconds(1)
| ||||
| CospfCurCfgVirtIntfTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.9 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Transit delay | ||||
| CospfCurCfgVirtIntfRetra | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.10 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval | ||||
| CospfCurCfgVirtIntfAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.11 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Authentication Key | ||||
| CospfCurCfgVirtIntfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0), enabled(1)
| ||||
| TospfNewCfgVirtIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10 | NA | ||
table · not-accessible · current The table of OSPF Virtual interface in the new configuration block. | ||||
| RospfNewCfgVirtIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1 | NA | ||
row · not-accessible · current Information about an OSPF virtual interface. | ||||
| CospfNewCfgVirtIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related. | ||||
| CospfNewCfgVirtIntfAreaId | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.2 | INTEGER (0..2) | RC | |
column · INTEGER (0..2) · read-create · current The index of the OSPF area to which this virtual interface belongs. | ||||
| CospfNewCfgVirtIntfNbr | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the OSPF neighbor for this virtual interface. | ||||
| CospfNewCfgVirtIntfMdkey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.4 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication. | ||||
| CospfNewCfgVirtIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.5 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Hello interval(1..65535s | 50..65535ms) | ||||
| CospfNewCfgVirtIntfHelloMS | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Units of time measurement fo Hello interval seconds(0), milliseconds(1)
| ||||
| CospfNewCfgVirtIntfDead | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.7 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Dead interval(1..65535s | 1000..65535ms) | ||||
| CospfNewCfgVirtIntfDeadMS | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Units of time measurement fo Dead interval seconds(0), milliseconds(1)
| ||||
| CospfNewCfgVirtIntfTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.9 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Transit delay(1..3600) | ||||
| CospfNewCfgVirtIntfRetra | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.10 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Retransmit interval(1..3600) | ||||
| CospfNewCfgVirtIntfAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.11 | DisplayString (SIZE (0..8)) | RC | |
column · DisplayString (SIZE (0..8)) · read-create · current Authentication Key SIZE(0..8) | ||||
| CospfNewCfgVirtIntfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Status disabled(0), enabled(1)
| ||||
| CospfNewCfgVirtIntfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Delete
other(0),
delete(1)
| ||||
| SospfMdkeyTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.13.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Mdkey table. | ||||
| TospfCurCfgHostTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.12 | NA | ||
table · not-accessible · current The table of OSPF Host configuration. | ||||
| RospfCurCfgHostEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1 | NA | ||
| CospfCurCfgHostIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF host number for which the OSPF host table is related. | ||||
| CospfCurCfgHostIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF host. | ||||
| CospfCurCfgHostAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| CospfCurCfgHostCost | 1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The cost of the OSPF host. | ||||
| CospfCurCfgHostState | 1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable an OSPF Host
| ||||
| TospfNewCfgHostTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.13 | NA | ||
table · not-accessible · current The table of OSPF Host configuration. | ||||
| RospfNewCfgHostEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1 | NA | ||
| CospfNewCfgHostIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF host number for which the OSPF host table is related. | ||||
| CospfNewCfgHostIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the OSPF host. | ||||
| CospfNewCfgHostAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The OSPF area index. | ||||
| CospfNewCfgHostCost | 1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.4 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The cost of the OSPF host. | ||||
| CospfNewCfgHostState | 1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable an OSPF Host
| ||||
| CospfNewCfgHostDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the OSPF host: no(0), yes(1)
| ||||
| TospfCurCfgRangeTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.14 | NA | ||
table · not-accessible · current The table of OSPF summary range in the current configuration. | ||||
| RospfCurCfgRangeEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1 | NA | ||
| CospfCurCfgRangeIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPF summary range table is related. | ||||
| CospfCurCfgRangeAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the range. | ||||
| CospfCurCfgRangeMask | 1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The mask of the range. | ||||
| CospfCurCfgRangeAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| CospfCurCfgRangeHideState | 1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the hide range.
| ||||
| CospfCurCfgRangeState | 1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the range.
| ||||
| TospfNewCfgRangeTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15 | NA | ||
table · not-accessible · current The table of OSPF summary range in the new configuration. | ||||
| RospfNewCfgRangeEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1 | NA | ||
| CospfNewCfgRangeIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPF summary range table is related. | ||||
| CospfNewCfgRangeAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the range. | ||||
| CospfNewCfgRangeMask | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The mask of the range. | ||||
| CospfNewCfgRangeAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The area index. | ||||
| CospfNewCfgRangeHideState | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the hide range.
| ||||
| CospfNewCfgRangeState | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the range.
| ||||
| CospfNewCfgRangeDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| TospfCurCfgLoopIfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.20 | NA | ||
table · not-accessible · current The table of OSPF Loopback Interfaces in the current configuration block. | ||||
| RospfCurCfgLoopIfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.20.1 | NA | ||
row · not-accessible · current Information about an OSPF Loopback Interface. | ||||
| CospfCurCfgLoopIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.20.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Loopback Interface number for which the OSPF Interface table is related. | ||||
| CospfCurCfgLoopIfArea | 1.3.6.1.4.1.20301.2.7.15.3.1.13.20.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the area that the loopback interface belongs | ||||
| CospfCurCfgLoopIfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.13.20.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the loopback interface disabled(0), enabled(1)
| ||||
| TospfNewCfgLoopIfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.13.21 | NA | ||
table · not-accessible · current The table of OSPF loopback interface in the new configuration block. | ||||
| RospfNewCfgLoopIfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1 | NA | ||
row · not-accessible · current Information about an OSPF loopback interface. | ||||
| CospfNewCfgLoopIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF loopback interface number for which the OSPF Loopback Interface table is related. | ||||
| CospfNewCfgLoopIfArea | 1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1.2 | INTEGER (0..5) | RC | |
column · INTEGER (0..5) · read-create · current The index of the area that the loopback interface belongs (0..5) | ||||
| CospfNewCfgLoopIfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the loopback interface disabled(0), enabled(1)
| ||||
| CospfNewCfgLoopIfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the loopback interface other(0), delete(1)
| ||||
| NipGeneralCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.14 | |||
| SipCurCfgRouterID | 1.3.6.1.4.1.20301.2.7.15.3.1.14.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The router ID of the switch. | ||||
| SipNewCfgRouterID | 1.3.6.1.4.1.20301.2.7.15.3.1.14.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The router ID of the switch. | ||||
| NipStaticArpCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.15 | |||
| SipStaticArpTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.15.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the Static ARP table. | ||||
| TipCurCfgStaticArpTable | 1.3.6.1.4.1.20301.2.7.15.3.1.15.2 | NA | ||
table · not-accessible · current The table of static ARPs in the current configuration block. | ||||
| RipCurCfgStaticArpEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1 | NA | ||
| CipCurCfgStaticArpIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static ARP table. | ||||
| CipCurCfgStaticArpIp | 1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address for the ARP entry. | ||||
| CipCurCfgStaticArpMAC | 1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The MAC address for the ARP entry. | ||||
| CipCurCfgStaticArpVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN for the ARP entry. | ||||
| CipCurCfgStaticArpPort | 1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.5 | PortNumber | RO | |
column · PortNumber · read-only · current The port for the ARP entry. | ||||
| TipNewCfgStaticArpTable | 1.3.6.1.4.1.20301.2.7.15.3.1.15.3 | NA | ||
table · not-accessible · current The table of static ARPs in the new configuration block. | ||||
| RipNewCfgStaticArpEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1 | NA | ||
| CipNewCfgStaticArpIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static ARP table. | ||||
| CipNewCfgStaticArpIp | 1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address for the ARP entry. | ||||
| CipNewCfgStaticArpMAC | 1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current The MAC address for the ARP entry. | ||||
| CipNewCfgStaticArpVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The VLAN for the ARP entry. | ||||
| CipNewCfgStaticArpPort | 1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.5 | PortNumber | RC | |
column · PortNumber · read-create · current The port for the ARP entry. | ||||
| CipNewCfgStaticArpAction | 1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| SipStaticArpClearAll | 1.3.6.1.4.1.20301.2.7.15.3.1.15.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to clear(2), clears all static ARP entries. Otherwise nothing is done.
| ||||
| Nrip2Cfg | 1.3.6.1.4.1.20301.2.7.15.3.1.18 | |||
| TripCurCfgIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1 | NA | ||
table · not-accessible · current The table of RIP on IP interface in the current configuration block. | ||||
| RripCurCfgIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1 | NA | ||
| CripCurCfgIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the RIP information is related. | ||||
| CripCurCfgIntfVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current RIP version.
| ||||
| CripCurCfgIntfState | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable RIP protocol.
| ||||
| CripCurCfgIntfListen | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable listening to route updates.
| ||||
| CripCurCfgIntfTrigUpdate | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable triggered updates.
| ||||
| CripCurCfgIntfMcastUpdate | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable multicast updates.
| ||||
| CripCurCfgIntfPoisonReverse | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current RIP poison reverse.
| ||||
| CripCurCfgIntfSupply | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable supplying route updates.
| ||||
| CripCurCfgIntfMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.10 | INTEGER (1..15) | RO | |
column · INTEGER (1..15) · read-only · current RIP route metric for this interface. | ||||
| CripCurCfgIntfAuth | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The type of Authentication used on this interface.
| ||||
| CripCurCfgIntfKey | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.12 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current RIP update authentication password. | ||||
| CripCurCfgIntfDefault | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies what RIP does with default routes.
| ||||
| CripCurCfgIntfSplitHorizon | 1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current RIP split horizon.
| ||||
| TripNewCfgIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2 | NA | ||
table · not-accessible · current The table of RIP on IP interface in the new configuration block. | ||||
| RripNewCfgIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1 | NA | ||
| CripNewCfgIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the RIP information is related. | ||||
| CripNewCfgIntfVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current RIP version.
| ||||
| CripNewCfgIntfSupply | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable supplying route updates.
| ||||
| CripNewCfgIntfListen | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable listening to route updates.
| ||||
| CripNewCfgIntfTrigUpdate | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable triggered updates.
| ||||
| CripNewCfgIntfMcastUpdate | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable multicast updates.
| ||||
| CripNewCfgIntfPoisonReverse | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current RIP poison reverse.
| ||||
| CripNewCfgIntfState | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable RIP protocol.
| ||||
| CripNewCfgIntfMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.10 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current RIP route metric for this interface. | ||||
| CripNewCfgIntfAuth | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The type of Authentication used on this interface.
| ||||
| CripNewCfgIntfKey | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.12 | DisplayString (SIZE (0..16)) | RC | |
column · DisplayString (SIZE (0..16)) · read-create · current RIP update authentication password. | ||||
| CripNewCfgIntfDefault | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none.
| ||||
| CripNewCfgIntfSplitHorizon | 1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current RIP split horizon.
| ||||
| NripGeneral | 1.3.6.1.4.1.20301.2.7.15.3.1.18.3 | |||
| Srip2CurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.18.3.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current RIP global state.
| ||||
| Srip2NewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.18.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn RIP on or off.
| ||||
| Srip2CurCfgUpdatePeriod | 1.3.6.1.4.1.20301.2.7.15.3.1.18.3.3 | INTEGER (1..120) | RO | |
scalar · INTEGER (1..120) · read-only · current Update Period in seconds. | ||||
| Srip2NewCfgUpdatePeriod | 1.3.6.1.4.1.20301.2.7.15.3.1.18.3.4 | INTEGER (1..120) | RW | |
scalar · INTEGER (1..120) · read-write · current Update Period in seconds. | ||||
| NripRouteRedistribution | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4 | |||
| NripRedistributeStatic | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1 | |||
| SripCurCfgStaticMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The metric to be assigned to static routes. A value of 0 indicates none. | ||||
| SripNewCfgStaticMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The metric to be assigned to static routes. A value of 0 indicates none. | ||||
| SripCurCfgStaticOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgStaticOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgStaticAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgStaticRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NripRedistributeEbgp | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2 | |||
| SripCurCfgEbgpMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The export metric to be assigned to External BGP routes. A value of 0 indicates none. | ||||
| SripNewCfgEbgpMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The export metric to be assigned to External BGP routes. A value of 0 indicates none. | ||||
| SripCurCfgEbgpOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgEbgpOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgEbgpAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgEbgpRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NripRedistributeIbgp | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3 | |||
| SripCurCfgIbgpMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The export metric for Internal BGP routes. A value of 0 indicates none. | ||||
| SripNewCfgIbgpMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The export metric for Internal BGP routes. A value of 0 indicates none. | ||||
| SripCurCfgIbgpOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgIbgpOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgIbgpAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgIbgpRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NripRedistributeFixed | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4 | |||
| SripCurCfgFixedMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The export metric for fixed routes. A value of 0 indicates none | ||||
| SripNewCfgFixedMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The export metric for fixed routes. A value of 0 indicates none | ||||
| SripCurCfgFixedOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgFixedOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgFixedAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgFixedRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NripRedistributeOspf | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5 | |||
| SripCurCfgOspfMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SripNewCfgOspfMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SripCurCfgOspfOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgOspfOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgOspfAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgOspfRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NripRedistributeEospf | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6 | |||
| SripCurCfgEospfMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SripNewCfgEospfMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SripCurCfgEospfOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgEospfOutRmapList | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgEospfAddOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgEospfRemoveOutRmap | 1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NigmpCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.19 | |||
| SigmpCurCfgOnOff | 1.3.6.1.4.1.20301.2.7.15.3.1.19.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Globally turn IGMP On/Off.
| ||||
| SigmpNewCfgOnOff | 1.3.6.1.4.1.20301.2.7.15.3.1.19.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn IGMP On/Off.
| ||||
| NigmpSnoopCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9 | |||
| SigmpSnoopCurCfgMrto | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value of multicast router timeout in the current config. | ||||
| SigmpSnoopNewCfgMrto | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The value of multicast router timeout in the new config. | ||||
| SigmpSnoopCurCfgAggrEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable of IGMP Report aggregation.
| ||||
| SigmpSnoopNewCfgAggrEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable of IGMP Report aggregation.
| ||||
| SigmpSnoopCurCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of IGMP Snooping.
| ||||
| SigmpSnoopNewCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set Enable/Disable of IGMP Snooping.
| ||||
| SigmpSnoopNewCfgVlanAdd | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.13 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be added to snooping vlan list. When read, 0 is returned. | ||||
| SigmpSnoopNewCfgVlanRem | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.14 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be removed from snooping vlan list. When read, 0 is returned. | ||||
| SigmpSnoopNewCfgVlanClear | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Removing ALL Snooping Vlans.
| ||||
| SigmpSnoopCurCfgVlanBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.16 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The snooping vlans present in the vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled. | ||||
| SigmpSnoopNewCfgVlanBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.17 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The snooping vlans present in the vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled. | ||||
| SigmpSnoopCurCfgSrcIp | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.26 | IpAddress | RO | |
scalar · IpAddress · read-only · current The source ip for GSQ proxy in current config. | ||||
| SigmpSnoopNewCfgSrcIp | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.27 | IpAddress | RW | |
scalar · IpAddress · read-write · current The source ip for GSQ proxy in new config. | ||||
| SigmpSnoopSetToDefault | 1.3.6.1.4.1.20301.2.7.15.3.1.19.9.33 | INTEGER | RW | |
scalar · INTEGER · read-write · current When setting the value setDefault(2), the IGMP Snooping configuration is set to the default values. When reading, none(1) is always returned.
| ||||
| NigmpStaticMrtrCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10 | |||
| TigmpStaticMrtrCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1 | NA | ||
table · not-accessible · current The IGMP Static Multicast Router table in the current configuration block. | ||||
| RigmpStaticMrtrCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1 | NA | ||
row · not-accessible · current A row in the Static Multicast Router table. | ||||
| CigmpStaticMrtrCurCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMP Multicast Router table port index. | ||||
| CigmpStaticMrtrCurCfgPortId | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1.2 | PortNumber | RO | |
column · PortNumber · read-only · current The IGMP Multicast Router port in the current configuration block. | ||||
| CigmpStaticMrtrCurCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMP Multicast Router port in the current configuration block. | ||||
| CigmpStaticMrtrCurCfgVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMP version of the IGMP Static Multicast Router.
| ||||
| TigmpStaticMrtrNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2 | NA | ||
table · not-accessible · current The IGMP Static Multicast Router table in the new configuration block. | ||||
| RigmpStaticMrtrNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1 | NA | ||
row · not-accessible · current A row in the Static Multicast Router table. | ||||
| CigmpStaticMrtrNewCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMP Multicast Router table port index. | ||||
| CigmpStaticMrtrNewCfgPortId | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.2 | PortNumber | RW | |
column · PortNumber · read-write · current The IGMP Multicast Router port in the new configuration block. | ||||
| CigmpStaticMrtrNewCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The IGMP Multicast Router port in the new configuration block. | ||||
| CigmpStaticMrtrNewCfgVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The IGMP version of the IGMP Static Multicast Router.
| ||||
| CigmpStaticMrtrNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| SigmpStaticMrtrNewCfgClear | 1.3.6.1.4.1.20301.2.7.15.3.1.19.10.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to the value of 2 (clear), the entire table is deleted. When read, other(1) is returned. Setting the value to anything other than 2(clear) has no effect on the table.
| ||||
| NigmpFilterCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11 | |||
| TigmpFltCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1 | NA | ||
table · not-accessible · current The IGMP filtering table in the current configuration block. | ||||
| RigmpFltCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1 | NA | ||
| CigmpFltCurCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMP filter table index. | ||||
| CigmpFltCurCfgMcastIp1 | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Range1 Multicast IP address to be filtered. | ||||
| CigmpFltCurCfgMcastIp2 | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Range2 Multicast IP address to be filtered. | ||||
| CigmpFltCurCfgAction | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The action for the IGMP filtering rule.
| ||||
| CigmpFltCurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of this IGMP filtering rule.
| ||||
| TigmpFltNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2 | NA | ||
table · not-accessible · current The IGMP filtering table in the current configuration block. | ||||
| RigmpFltNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1 | NA | ||
| CigmpFltNewCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMP filter table index. | ||||
| CigmpFltNewCfgMcastIp1 | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current Range1 Multicast source IP address to be filtered. | ||||
| CigmpFltNewCfgMcastIp2 | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current Range2 Multicast source IP address to be filtered. | ||||
| CigmpFltNewCfgAction | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The action for the IGMP filtering rule.
| ||||
| CigmpFltNewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The state of this IGMP filtering rule.
| ||||
| CigmpFltNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| TigmpFltCurCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3 | NA | ||
table · not-accessible · current The IGMP filtering port table in the current configuration block. | ||||
| RigmpFltCurCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3.1 | NA | ||
| CigmpFltCurCfgPortIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index. | ||||
| CigmpFltCurCfgPortState | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable IGMP filtering.
| ||||
| CigmpFltCurCfgPortFiltBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3.1.3 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current The IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to igmpFltCurCfgTable)
where x : 1 - The represented IGMP filter rule applied to the port
0 - The represented IGMP filter rule not applied to the port | ||||
| TigmpFltNewCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4 | NA | ||
table · not-accessible · current The IGMP filtering port table in the new configuration block. | ||||
| RigmpFltNewCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1 | NA | ||
| CigmpFltNewCfgPortIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index. | ||||
| CigmpFltNewCfgPortState | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable IGMP filtering.
| ||||
| CigmpFltNewCfgPortFiltBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.3 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current The IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltNewCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the port | ||||
| CigmpFltNewCfgPortAddFiltRule | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always. | ||||
| CigmpFltNewCfgPortRemFiltRule | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always. | ||||
| SigmpFltCurCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable of IGMP Filtering.
| ||||
| SigmpFltNewCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.11.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable of IGMP Filtering.
| ||||
| NigmpRelayCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12 | |||
| SigmpRelayCurCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of IGMP Relay.
| ||||
| SigmpRelayNewCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable of IGMP Relay.
| ||||
| SigmpRelayNewCfgAddVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be added to relay vlan list. When read, 0 is returned. | ||||
| SigmpRelayNewCfgRemVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be removed from relay vlan list. When read, 0 is returned. | ||||
| SigmpRelayNewCfgClearVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Removing ALL Relay Vlans.
| ||||
| SigmpRelayCurCfgVlanBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The relay vlans present in the vlan map list. The relay vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has relay enabled 0 - The represented vlan does not have relay enabled. | ||||
| SigmpRelayNewCfgVlanBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.7 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The relay vlans present in the vlan map list. The relay vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has relay enabled 0 - The represented vlan does not have relay enabled. | ||||
| SigmpRelayCurCfgReport | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.8 | INTEGER (0..150) | RO | |
scalar · INTEGER (0..150) · read-only · current The Unsolicited Report Interval. | ||||
| SigmpRelayNewCfgReport | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.9 | INTEGER (0..150) | RW | |
scalar · INTEGER (0..150) · read-write · current Set Unsolicited Report Interval. | ||||
| TigmpRelayMrtrCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10 | NA | ||
table · not-accessible · current The IGMP relay multicast router table in the current configuration block. | ||||
| RigmpRelayMrtrCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1 | NA | ||
row · not-accessible · current A row in the IGMP relay multicast router table. | ||||
| CigmpRelayMrtrCurCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.1 | INTEGER (1..2) | RO | |
column · INTEGER (1..2) · read-only · current The IGMP relay multicast router table index. | ||||
| CigmpRelayMrtrCurCfgAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the multicast router. | ||||
| CigmpRelayMrtrCurCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the multicast router.
| ||||
| CigmpRelayMrtrCurCfgInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.4 | INTEGER (1..60) | RO | |
column · INTEGER (1..60) · read-only · current The interval between ping attempts. | ||||
| CigmpRelayMrtrCurCfgRetry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.5 | INTEGER (1..120) | RO | |
column · INTEGER (1..120) · read-only · current The number of failed attempts to declare router DOWN. | ||||
| CigmpRelayMrtrCurCfgRestr | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.6 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The number of successful attempts to declare router UP. | ||||
| CigmpRelayMrtrCurCfgVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMP version.
| ||||
| TigmpRelayMrtrNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11 | NA | ||
table · not-accessible · current The IGMP relay multicast router table in the new configuration block. | ||||
| RigmpRelayMrtrNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1 | NA | ||
row · not-accessible · current A row in the IGMP relay multicast router table. | ||||
| CigmpRelayMrtrNewCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.1 | INTEGER (1..2) | RO | |
column · INTEGER (1..2) · read-only · current The IGMP relay multicast router table index. | ||||
| CigmpRelayMrtrNewCfgAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the multicast router. | ||||
| CigmpRelayMrtrNewCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The status of the multicast router.
| ||||
| CigmpRelayMrtrNewCfgInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.4 | INTEGER (1..60) | RW | |
column · INTEGER (1..60) · read-write · current The interval between ping attempts. | ||||
| CigmpRelayMrtrNewCfgRetry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.5 | INTEGER (1..120) | RW | |
column · INTEGER (1..120) · read-write · current The number of failed attempts to declare router DOWN. | ||||
| CigmpRelayMrtrNewCfgRestr | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.6 | INTEGER (1..128) | RW | |
column · INTEGER (1..128) · read-write · current The number of successful attempts to declare router UP. | ||||
| CigmpRelayMrtrNewCfgVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The IGMP version.
| ||||
| CigmpRelayMrtrNewCfgRemove | 1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the IGMP Relay multicast router.
| ||||
| NigmpAdvCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13 | |||
| SigmpAdvCurCfgQInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.1 | INTEGER (1..600) | RO | |
scalar · INTEGER (1..600) · read-only · current The IGMP Query Interval of current config. | ||||
| SigmpAdvNewCfgQInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.2 | INTEGER (1..600) | RW | |
scalar · INTEGER (1..600) · read-write · current The IGMP Query Interval of new config. | ||||
| SigmpAdvCurCfgRobust | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.3 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current The value of expected packet loss on subnet in current config. | ||||
| SigmpAdvNewCfgRobust | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.4 | INTEGER (1..10) | RW | |
scalar · INTEGER (1..10) · read-write · current Set the value of expected packet loss on subnet. | ||||
| SigmpAdvCurCfgTimeout | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.5 | INTEGER (1..255) | RO | |
scalar · INTEGER (1..255) · read-only · current The IGMP Report timeout. | ||||
| SigmpAdvNewCfgTimeout | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.6 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current Set IGMP Report timeout. | ||||
| SigmpAdvNewCfgVlanFastlvAdd | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be added to quick-leave vlan list. When read, 0 is returned. | ||||
| SigmpAdvNewCfgVlanFastlvRem | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be removed from quick-leave vlan list. When read, 0 is returned. | ||||
| SigmpAdvCurCfgVlanFastlvBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.9 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The fast-leave enabled vlans present in the vlan map list. The fast-leave enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fast-leave enabled 0 - The represented vlan does not have fast-leave enabled. | ||||
| SigmpAdvNewCfgVlanFastlvBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.10 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The fast-leave enabled vlans present in the vlan map list. The fast-leave enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fast-leave enabled 0 - The represented vlan does not have fast-leave enabled. | ||||
| SigmpAdvCurCfgRtrAlert | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable sending IGMP messages with Router Alert option.
| ||||
| SigmpAdvNewCfgRtrAlert | 1.3.6.1.4.1.20301.2.7.15.3.1.19.13.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable sending IGMP messages with Router Alert option.
| ||||
| NigmpV3SnoopCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14 | |||
| SigmpV3SnoopCurCfgSources | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of sources to snoop in a group record in current config. | ||||
| SigmpV3SnoopNewCfgSources | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Number of sources to snoop in a group record in new config. | ||||
| SigmpV3SnoopCurCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of IGMP V3 Snooping.
| ||||
| SigmpV3SnoopNewCfgEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set Enable/Disable of IGMP V3 Snooping.
| ||||
| SigmpV3SnoopCurCfgExcludeEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of IGMP V3 EXCLUDE filter-mode Snooping.
| ||||
| SigmpV3SnoopNewCfgExcludeEnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping.
| ||||
| SigmpV3SnoopCurCfgV1V2EnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of IGMP V1/V2 Report Snooping.
| ||||
| SigmpV3SnoopNewCfgV1V2EnaDis | 1.3.6.1.4.1.20301.2.7.15.3.1.19.14.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set Enable/Disable of IGMP V1/V2 Report Snooping.
| ||||
| TigmpCurQurCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15 | NA | ||
table · not-accessible · current The table of IGMP querier configuration. | ||||
| RigmpCurQurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1 | NA | ||
row · not-accessible · current A row in the IGMP querier configuration table | ||||
| CigmpCurQurCfgVlanIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.1 | INTEGER (1..4094) | RO | |
column · INTEGER (1..4094) · read-only · current The vlan number for which the IGMP querier information is related. | ||||
| CigmpCurQuerierState | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the switch is running as a querier in the VLAN. Based on the querier election, if elected as a querier, it will send query messages. If the switch receives the query message with lower IP/MAC any other querier in the VLAN, It will move to non querier state. If a leave is received then querier moves to checking membership state.
| ||||
| CigmpCurCfgQuerier | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The snooping switch can be configured to send IGMP queries. querier are not present in the VLAN and it set to 'enabled' the switch will generate general query messages. The query messages will be suppressed if the switch receives the query message from any other querier with lower IP/MAC in the VLAN.
| ||||
| CigmpCurCfgQueryInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.4 | INTEGER (1..608) | RO | |
column · INTEGER (1..608) · read-only · current This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. | ||||
| CigmpCurCfgQurSrcIp | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The source ip for GSQ proxy in this vlan. This Src Ip will be used in querier election mechanism. It will be the source address in queries sent bye the switch. | ||||
| CigmpCurCfgElectionType | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The querier selection type specify the criteria to be used to elect querier for this VLAN. When a switch is configured as a querier, this will define the election criteria . e.g. MAC or source IP-address.
| ||||
| CigmpCurCfgQurRobustness | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.7 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current The Robustness Variable allows tuning for the Other Querier Present Interval. | ||||
| CigmpCurCfgQurStartupCnt | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.8 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current Represents the number of Queries sent out on startup of querier election, separated by the Startup Query Interval. | ||||
| CigmpCurCfgQurStartupInt | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.9 | INTEGER (1..608) | RO | |
column · INTEGER (1..608) · read-only · current This variable represents the interval(in seconds) between General Queries sent by a Querier on startup. By default: 1/4 the Query Interval. | ||||
| CigmpCurCfgQurMaxRespTime | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.10 | INTEGER (1..256) | RO | |
column · INTEGER (1..256) · read-only · current The maximum query response interval advertised in IGMP queries on this VLAN. | ||||
| CigmpCurCfgOtherQurAddress | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.11 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The IP/MAC Address of the Querier, which has won the Querier election, when bosSnoopVlanCfgQuerier is enabled on this vlan. | ||||
| CigmpCurCfgOtherQurPresentInt | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.12 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The Other Querier Present Interval is the length of time that must pass before switch decides that there is no longer another multicast router which should be the querier. This value is ((the Robustness Variable) times (the Query Interval)) plus (one half of one Query Response Interval). | ||||
| CigmpCurCfgVlanOperVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the operating version of the IGMP snooping switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3). The 'bosIgsVlanCfgOperVersion' should be configured on the basis of the version of the router present in the VLAN.
| ||||
| CigmpCurVlanOperVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the operating version of the IGMP snooping switch for specific VLAN. The default operating mode on a specific VLAN IGMP version 3 i.e, V3(3).
| ||||
| CigmpCurVlanOlderVerTimer | 1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.15 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current Indicates the remaining time of lowest operating version of the vlan. For interoperability with multicast routers/switches/Hosts, running older versions of IGMP, systems maintain a IGMP Version variable for each Vlan. In order to switch gracefully between versions of IGMP, hosts keep both an IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan. According to RFC 3376 this value is ((the Robustness Variable) times (the Query Interval)) plus (one Query Response Interval). | ||||
| TigmpNewQurCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16 | NA | ||
table · not-accessible · current The table of IGMP querier configuration. | ||||
| RigmpNewQurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1 | NA | ||
row · not-accessible · current A row in the IGMP querier configuration table | ||||
| CigmpNewQurCfgVlanIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.1 | INTEGER (1..4094) | RO | |
column · INTEGER (1..4094) · read-only · current The vlan number for which the IGMP querier information is related. | ||||
| CigmpNewQuerierState | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the switch is running as a querier in the VLAN. Based on the querier election, if elected as a querier, it will send query messages. If the switch receives the query message with lower IP/MAC any other querier in the VLAN, It will move to non querier state. If a leave is received then querier moves to checking membership state.
| ||||
| CigmpNewCfgQuerier | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The snooping switch can be configured to send IGMP queries. querier are not present in the VLAN and it set to 'enabled' the switch will generate general query messages. The query messages will be suppressed if the switch receives the query message from any other querier with lower IP/MAC in the VLAN.
| ||||
| CigmpNewCfgQueryInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.4 | INTEGER (1..608) | RW | |
column · INTEGER (1..608) · read-write · current This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. | ||||
| CigmpNewCfgQurSrcIp | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.5 | IpAddress | RW | |
column · IpAddress · read-write · current The source ip for GSQ proxy in this vlan. This Src Ip will be used in querier election mechanism. It will be the source address in queries sent bye the switch. | ||||
| CigmpNewCfgElectionType | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The querier selection type specify the criteria to be used to elect querier for this VLAN. When a switch is configured as a querier, this will define the election criteria . e.g. MAC or source IP-address.
| ||||
| CigmpNewCfgQurRobustness | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.7 | INTEGER (1..10) | RW | |
column · INTEGER (1..10) · read-write · current The Robustness Variable allows tuning for the Other Querier Present Interval. | ||||
| CigmpNewCfgQurStartupCnt | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.8 | INTEGER (1..10) | RW | |
column · INTEGER (1..10) · read-write · current Represents the number of Queries sent out on startup of querier election, separated by the Startup Query Interval. | ||||
| CigmpNewCfgQurStartupInt | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.9 | INTEGER (1..608) | RW | |
column · INTEGER (1..608) · read-write · current This variable represents the interval(in seconds) between General Queries sent by a Querier on startup. By default: 1/4 the Query Interval. | ||||
| CigmpNewCfgQurMaxRespTime | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.10 | INTEGER (1..256) | RW | |
column · INTEGER (1..256) · read-write · current The maximum query response interval advertised in IGMP queries on this VLAN. | ||||
| CigmpNewCfgOtherQurAddress | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.11 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The IP/MAC Address of the Querier, which has won the Querier election, when bosSnoopVlanCfgQuerier is enabled on this vlan. | ||||
| CigmpNewCfgOtherQurPresentInt | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.12 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The Other Querier Present Interval is the length of time that must pass before switch decides that there is no longer another multicast router which should be the querier. This value is ((the Robustness Variable) times (the Query Interval)) plus (one half of one Query Response Interval). | ||||
| CigmpNewCfgVlanOperVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the operating version of the IGMP snooping switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOperVersion' should be configured on the basis of the version of the mrouter present in the VLAN.
| ||||
| CigmpNewVlanOperVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the operating version of the IGMP snooping switch for specific VLAN. The default operating mode on a specific VLAN IGMP version 3 i.e, V3(3).
| ||||
| CigmpNewVlanOlderVerTimer | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.15 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current Indicates the remaining time of lowest operating version of the vlan. For interoperability with multicast routers/switches/Hosts, running older versions of IGMP, systems maintain a IGMP Version variable for each Vlan. In order to switch gracefully between versions of IGMP, hosts keep both an IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan. According to RFC 3376 this value is ((the Robustness Variable) times (the Query Interval)) plus (one Query Response Interval). | ||||
| CigmpNewCfgQuerierDefault | 1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Action to set the default IGMP Querier settings on a Vlan. Returns other(1) when read.
| ||||
| SigmpCurCfgQuerierOnOff | 1.3.6.1.4.1.20301.2.7.15.3.1.19.17 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of IGMP Querier.
| ||||
| SigmpNewCfgQuerierOnOff | 1.3.6.1.4.1.20301.2.7.15.3.1.19.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn IGMP Querier On/Off.
| ||||
| NipmcStaticRouteCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.20 | |||
| SipmcStaticRouteTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.20.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IPMC Static Route table. | ||||
| TipmcCurCfgStaticRouteTable | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2 | NA | ||
table · not-accessible · current The table of static IPMC routes in the current configuration block. | ||||
| RipmcCurCfgStaticRouteEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1 | NA | ||
| CipmcCurCfgStaticRouteIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the IPMC static routing table. | ||||
| CipmcCurCfgStaticRouteDestIp | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IPMC address of this IPMC route. | ||||
| CipmcCurCfgStaticRouteVlanId | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan id of this route. | ||||
| CipmcCurCfgStaticRouteHostBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Host Port is added
0 - The represented Host Port is not added | ||||
| CipmcCurCfgStaticRoutePMrtrBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Primary Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Primary Mrouter Port is added
0 - The represented Primary Mrouter Port is not added | ||||
| CipmcCurCfgStaticRouteBMrtrBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Backup Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Backup Mrouter Port is added
0 - The represented Backup Mrouter Port is not added | ||||
| CipmcCurCfgStaticRouteVrid | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The virtual router id of this route. | ||||
| CipmcCurCfgStaticRouteAdminkeys | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.8 | DisplayString (SIZE (1..128)) | RO | |
column · DisplayString (SIZE (1..128)) · read-only · current The LACP port adminkey of this route. Adminkeys on five positions alligned to right, separated by commas. | ||||
| CipmcCurCfgStaticRouteTrunks | 1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to IPMC route
0 - The represented trunk does not belong to IPMC route | ||||
| TipmcNewCfgStaticRouteTable | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3 | NA | ||
table · not-accessible · current The table of IPMC static routes in the new configuration block. When creating a new route, Destination IP and Vlan id must be set first. The actual change in configuration occurs on using PortInfo leaf. | ||||
| RipmcNewCfgStaticRouteEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1 | NA | ||
| CipmcNewCfgStaticRouteIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the IPMC static routing table. | ||||
| CipmcNewCfgStaticRouteDestIp | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IPMC address of this route. It must be set along Vlan id before creating new route. | ||||
| CipmcNewCfgStaticRouteVlanId | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The vlan id of this route. It must be set along Destination IP before creating new route. | ||||
| CipmcNewCfgStaticRouteHostBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Host Port is added
0 - The represented Host Port is not added | ||||
| CipmcNewCfgStaticRoutePMrtrBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Primary Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Primary Mrouter Port is added
0 - The represented Primary Mrouter Port is not added | ||||
| CipmcNewCfgStaticRouteBMrtrBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Backup Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Backup Mrouter Port is added
0 - The represented Backup Mrouter Port is not added | ||||
| CipmcNewCfgStaticRouteAddPort | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current The port to be added to this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. When creating a new route, be sure to set Destination IP and Vlan Id before using this leaf. | ||||
| CipmcNewCfgStaticRouteTrunks | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to ipmc
0 - The represented trunk does not belong to ipmc | ||||
| CipmcNewCfgStaticRouteAddTrunk | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current The trunk group number to be added to this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. A '0' value is returned when read. When creating a new route, be sure to set Destination IP and Vlan Id before using this leaf. | ||||
| CipmcNewCfgStaticRouteRemTrunk | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current The trunk group number to be removed from this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. A '0' value is returned when read. | ||||
| CipmcNewCfgStaticRouteAdminkeys | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.11 | DisplayString (SIZE (1..128)) | RO | |
column · DisplayString (SIZE (1..128)) · read-only · current The LACP port adminkeys list for to this IPMC route. Adminkeys on five positions alligned to right, separated by commas | ||||
| CipmcNewCfgStaticRouteAddAdminkey | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current The LACP port adminkey to be added to this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. A '0' value is returned when read. When creating a new route, be sure to set Destination IP and Vlan Id before using this leaf. | ||||
| CipmcNewCfgStaticRouteRemAdminkey | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The LACP port adminkey to be removed from this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. A '0' value is returned when read. | ||||
| CipmcNewCfgStaticRoutePortInfo | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current The Port/Trunk/Adminkey Information to be added to this IPMC route (host/primary/backup). Use it only right after you set a new port/trunk/adminkey to specify its type. Warning: If snooping is enabled, primary/backup routes will be converted to host.
| ||||
| CipmcNewCfgStaticRouteVrid | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.15 | Integer32 | RC | |
column · Integer32 · read-create · current The virtual router id of this route. | ||||
| CipmcNewCfgStaticRouteDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Delete this route.
| ||||
| CipmcNewCfgStaticRouteRemPort | 1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.17 | Integer32 | RC | |
column · Integer32 · read-create · current The port to be removed from this IPMC route. Not allowed to delete ports that are part of trunks. | ||||
| SipmcStaticRouteClearAll | 1.3.6.1.4.1.20301.2.7.15.3.1.20.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to clear(2),clears all static IPMC routes. Otherwhise nothing is done.
| ||||
| NipStaticNbrCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.21 | |||
| SipStaticNbrTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.21.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the Static NBR Cache table. | ||||
| TipCurCfgStaticNbrTable | 1.3.6.1.4.1.20301.2.7.15.3.1.21.2 | NA | ||
table · not-accessible · current The table of static NBR Cache entries in the current configuration block. | ||||
| RipCurCfgStaticNbrEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1 | NA | ||
| CipCurCfgStaticNbrIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static NBR Cache table. | ||||
| CipCurCfgStaticNbrIp | 1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The IP address for the NBR Cache entry. | ||||
| CipCurCfgStaticNbrMAC | 1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The MAC address for the NBR Cache entry. | ||||
| CipCurCfgStaticNbrVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN for the NBR Cache entry. | ||||
| CipCurCfgStaticNbrPort | 1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.5 | PortNumber | RO | |
column · PortNumber · read-only · current The port for the NBR Cache entry. | ||||
| TipNewCfgStaticNbrTable | 1.3.6.1.4.1.20301.2.7.15.3.1.21.3 | NA | ||
table · not-accessible · current The table of static NBR Cache entries in the new configuration block. | ||||
| RipNewCfgStaticNbrEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1 | NA | ||
| CipNewCfgStaticNbrIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static NBR Cache table. | ||||
| CipNewCfgStaticNbrIp | 1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The IP address for the NBR Cache entry. | ||||
| CipNewCfgStaticNbrMAC | 1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current The MAC address for the NBR Cache entry. | ||||
| CipNewCfgStaticNbrVlan | 1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The VLAN for the NBR Cache entry. | ||||
| CipNewCfgStaticNbrPort | 1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.5 | PortNumber | RC | |
column · PortNumber · read-create · current The port for the NBR Cache entry. | ||||
| CipNewCfgStaticNbrAction | 1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| SipStaticNbrClearAll | 1.3.6.1.4.1.20301.2.7.15.3.1.21.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to clear(2),clears all static NBR Cache entries. Otherwhise nothing is done.
| ||||
| NipGatewayIpv6Cfg | 1.3.6.1.4.1.20301.2.7.15.3.1.22 | |||
| SipGatewayIpv6TableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.22.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IPv6 gateway table. | ||||
| TipCurCfgGwIpv6Table | 1.3.6.1.4.1.20301.2.7.15.3.1.22.2 | NA | ||
table · not-accessible · current The table of IPv6 gateways in the Current configuration Block. | ||||
| RipCurCfgGwIpv6Entry | 1.3.6.1.4.1.20301.2.7.15.3.1.22.2.1 | NA | ||
| CipCurCfgGwIpv6Index | 1.3.6.1.4.1.20301.2.7.15.3.1.22.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IPv6 gateway number for which the information is related. | ||||
| CipCurCfgGwIpv6Addr | 1.3.6.1.4.1.20301.2.7.15.3.1.22.2.1.2 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current The IPv6 address of the gateway. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or fe80:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx%interface | ||||
| CipCurCfgGwIpv6State | 1.3.6.1.4.1.20301.2.7.15.3.1.22.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the default IPv6 gateway.
| ||||
| TipNewCfgGwIpv6Table | 1.3.6.1.4.1.20301.2.7.15.3.1.22.3 | NA | ||
table · not-accessible · current The table of IPv6 gateways in the new configuration block. | ||||
| RipNewCfgGwIpv6Entry | 1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1 | NA | ||
| CipNewCfgGwIpv6Index | 1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IPv6 gateway number for which the information is related. | ||||
| CipNewCfgGwIpv6Addr | 1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The IPv6 address of the gateway. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| CipNewCfgGwIpv6State | 1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the default IPv6 gateway.
| ||||
| CipNewCfgGwIpv6Delete | 1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the default gw is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the default IPv6 gw.
| ||||
| NipStaticRoute6Cfg | 1.3.6.1.4.1.20301.2.7.15.3.1.23 | |||
| SipStaticRoute6TableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.23.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the Static Route6 table. | ||||
| TipCurCfgStaticRoute6Table | 1.3.6.1.4.1.20301.2.7.15.3.1.23.2 | NA | ||
table · not-accessible · current The table of static IP6 routes in the current configuration block. | ||||
| RipCurCfgStaticRoute6Entry | 1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1 | NA | ||
| CipCurCfgStaticRoute6Indx | 1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static IP6 routing table. | ||||
| CipCurCfgStaticRoute6DestIp | 1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The destination IP6 address of this route. | ||||
| CipCurCfgStaticRoute6Mask | 1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.3 | INTEGER (0..128) | RO | |
column · INTEGER (0..128) · read-only · current The destination IP6 prefix len of this route. | ||||
| CipCurCfgStaticRoute6Gateway | 1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The IP6 address of the gateway for this route. | ||||
| CipCurCfgStaticRoute6Interface | 1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The IP6 interface of this route. The IP6 address of the specified interface shall be used as source IP when performs routing. | ||||
| TipNewCfgStaticRoute6Table | 1.3.6.1.4.1.20301.2.7.15.3.1.23.3 | NA | ||
table · not-accessible · current The table of static IP6 routes in the new configuration block. | ||||
| RipNewCfgStaticRoute6Entry | 1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1 | NA | ||
| CipNewCfgStaticRoute6Indx | 1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static IP6 routing table. | ||||
| CipNewCfgStaticRoute6DestIp | 1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The destination IP6 address of this route. Address should be 16-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| CipNewCfgStaticRoute6Mask | 1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.3 | INTEGER (0..128) | RC | |
column · INTEGER (0..128) · read-create · current The prefix length of this route. | ||||
| CipNewCfgStaticRoute6Gateway | 1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.4 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The IP6 address of the gateway for this route. Address should be 16-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| CipNewCfgStaticRoute6Action | 1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Set the value '2' to delete the entire route entry. Value 1 (other) is returned when read.
| ||||
| CipNewCfgStaticRoute6Interface | 1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The IP6 interface of this route. The IP6 address of the specified interface shall be used as source IP when performs routing. | ||||
| SipStaticRoute6ClearAllByDestIp | 1.3.6.1.4.1.20301.2.7.15.3.1.23.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current Clears all static IP6 routes with the specified destination IP6 address. | ||||
| SipStaticRoute6ClearAllByGatewayIp | 1.3.6.1.4.1.20301.2.7.15.3.1.23.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current Clears all static IP6 routes with the specified gateway IP address. | ||||
| SipStaticRoute6ClearAllByInterface | 1.3.6.1.4.1.20301.2.7.15.3.1.23.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clears all IP6 routes on the specified inteface number. | ||||
| SipStaticRoute6ClearAll | 1.3.6.1.4.1.20301.2.7.15.3.1.23.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to clear(2), clears all IP6 static routes. Otherwise nothing is done.
| ||||
| NipInterfaceLoopbackCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.24 | |||
| SipInterfaceLoopbackTableMax | 1.3.6.1.4.1.20301.2.7.15.3.1.24.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP Loopback interface table. | ||||
| TipCurCfgIntfLoopbackTable | 1.3.6.1.4.1.20301.2.7.15.3.1.24.2 | NA | ||
table · not-accessible · current The table of IP Loopback interface configuration. | ||||
| RipCurCfgIntfLoopbackEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1 | NA | ||
row · not-accessible · current A row in the Ip Loopback interface table | ||||
| CipCurCfgIntfLoopbackIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Loopback interface number for which the IP information is related. | ||||
| CipCurCfgIntfLoopbackAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the interface. | ||||
| CipCurCfgIntfLoopbackMask | 1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask of the interface. | ||||
| CipCurCfgIntfLoopbackBroadcast | 1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The broadcast address of the interface. | ||||
| CipCurCfgIntfLoopbackState | 1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the interface.
| ||||
| TipNewCfgIntfLoopbackTable | 1.3.6.1.4.1.20301.2.7.15.3.1.24.3 | NA | ||
table · not-accessible · current The table of loopback interface in the new configuration block. | ||||
| RipNewCfgIntfLoopbackEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1 | NA | ||
row · not-accessible · current A row in the Ip Loopback interface table | ||||
| CipNewCfgIntfLoopbackIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Loopback interface number for which the IP information is related. | ||||
| CipNewCfgIntfLoopbackAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the interface. | ||||
| CipNewCfgIntfLoopbackMask | 1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet mask of the interface. | ||||
| CipNewCfgIntfLoopbackState | 1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the interface.
| ||||
| CipNewCfgIntfLoopbackDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| Nospf3Cfg | 1.3.6.1.4.1.20301.2.7.15.3.1.26 | |||
| Nospf3General | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1 | |||
| Sospf3IntfTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPFv3 Interface table. | ||||
| Sospf3AreaTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPFv3 Area table. | ||||
| Sospf3RangeTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPFv3 Range table. | ||||
| Sospf3ExtRangeTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPFv3 Summary Prefix table. | ||||
| Sospf3RedistTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPFv3 Redist Config table. | ||||
| Sospf3VirtIntfTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPFv3 Virtual Interface table. | ||||
| Sospf3HostTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPFv3 Host table. | ||||
| Sospf3NbrTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPFv3 Neighbor table. | ||||
| Sospf3CurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPFv3 global state.
| ||||
| Sospf3NewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn OSPFv3 on or off.
| ||||
| Sospf3CurCfgRouterId | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.11 | IpAddress | RO | |
scalar · IpAddress · read-only · current The router ID. | ||||
| Sospf3NewCfgRouterId | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.12 | IpAddress | RC | |
scalar · IpAddress · read-create · current The router ID. | ||||
| Sospf3CurCfgAbrType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPFv3 alternative ABR type.
| ||||
| Sospf3NewCfgAbrType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the OSPFv3 alternative ABR type.
| ||||
| Sospf3CurCfgLSDB | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.15 | INTEGER (-1..2147483647) | RO | |
scalar · INTEGER (-1..2147483647) · read-only · current The LSDB limit for external LSA. | ||||
| Sospf3NewCfgLSDB | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.16 | INTEGER (-1..2147483647) | RW | |
scalar · INTEGER (-1..2147483647) · read-write · current Set the LSDB limit for external LSA, -1 for none. | ||||
| Sospf3CurCfgExitOverflow | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.17 | Unsigned32 (0..4294967295) | RO | |
scalar · Unsigned32 (0..4294967295) · read-only · current The exit overflow interval in seconds. | ||||
| Sospf3NewCfgExitOverflow | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.18 | Unsigned32 (0..4294967295) | RW | |
scalar · Unsigned32 (0..4294967295) · read-write · current Set the exit overflow interval in seconds. | ||||
| Sospf3CurCfgReferenceBw | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.19 | Unsigned32 (0..4294967295) | RO | |
scalar · Unsigned32 (0..4294967295) · read-only · current The reference bandwidth for default interface metric calculation. | ||||
| Sospf3NewCfgReferenceBw | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.20 | Unsigned32 (0..4294967295) | RW | |
scalar · Unsigned32 (0..4294967295) · read-write · current The reference bandwidth for default interface metric calculation. | ||||
| Sospf3CurCfgSpfDelay | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.21 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current The delay between topology change and SPF calculation. | ||||
| Sospf3NewCfgSpfDelay | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.22 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The delay between topology change and SPF calculation. | ||||
| Sospf3CurCfgSpfHold | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.23 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current The hold time between two consecutive SPF calculation. | ||||
| Sospf3NewCfgSpfHold | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.24 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The hold time between two consecutive SPF calculation. | ||||
| Sospf3CurCfgNssaAsbrDfRtTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.29 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPFv3 state of setting P-bit by an NSSA internal ASBR.
| ||||
| Sospf3NewCfgNssaAsbrDfRtTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.26.1.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current OSPFv3 state of setting P-bit by an NSSA internal ASBR.
| ||||
| Tospf3CurCfgAreaTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2 | NA | ||
table · not-accessible · current The table of OSPFv3 area in the current configuration block. | ||||
| Rospf3CurCfgAreaEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1 | NA | ||
| Cospf3CurCfgAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 area number for which the OSPFv3 area table is related. | ||||
| Cospf3CurCfgAreaId | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPFv3 area. | ||||
| Cospf3CurCfgAreaStbInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.3 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The stability interval for the NSSA area | ||||
| Cospf3CurCfgAreaType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Type of Area. transit(1) stub(2) nssa(3)
| ||||
| Cospf3CurCfgAreaNoSumm | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0) enabled(1)
| ||||
| Cospf3CurCfgAreaDefaultMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.6 | INTEGER (1..16777215) | RO | |
column · INTEGER (1..16777215) · read-only · current Metric for stub/NSSA area (1-16777215) | ||||
| Cospf3CurCfgAreaDefaultMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.7 | INTEGER (1..3) | RO | |
column · INTEGER (1..3) · read-only · current Metric Type for stub/NSSA area (1-3) | ||||
| Cospf3CurCfgAreaTranslRole | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Translation role for the NSSA area. always(1) candidate(2)
| ||||
| Cospf3CurCfgAreaStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0) enabled(1)
| ||||
| Tospf3NewCfgAreaTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3 | NA | ||
table · not-accessible · current The table of OSPFv3 Area configuration in the new configuration block. | ||||
| Rospf3NewCfgAreaEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1 | NA | ||
| Cospf3NewCfgAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 area number for which the OSPFv3 area table is related. | ||||
| Cospf3NewCfgAreaId | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the OSPFv3 area. | ||||
| Cospf3NewCfgAreaStbInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.3 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The Stability interval for the NSSA area. | ||||
| Cospf3NewCfgAreaType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Type of Area. transit(1) stub(2) nssa(3)
| ||||
| Cospf3NewCfgAreaNoSumm | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Status disabled(0) enabled(1)
| ||||
| Cospf3NewCfgAreaDefaultMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.6 | INTEGER (1..16777215) | RC | |
column · INTEGER (1..16777215) · read-create · current Metric for stub/NSSA area (1-16777215) | ||||
| Cospf3NewCfgAreaDefaultMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.7 | INTEGER (1..3) | RC | |
column · INTEGER (1..3) · read-create · current Metric Type for stub/NSSA area (1-3) | ||||
| Cospf3NewCfgAreaTranslRole | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Translation role for the NSSA area. always(1) candidate(2)
| ||||
| Cospf3NewCfgAreaStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Status disabled(0) enabled(1)
| ||||
| Cospf3NewCfgAreaDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the area
no(0),
yes(1)
| ||||
| Tospf3CurCfgHostTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.4 | NA | ||
table · not-accessible · current The table of OSPFv3 Host configuration. | ||||
| Rospf3CurCfgHostEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1 | NA | ||
| Cospf3CurCfgHostIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 host number for which the OSPFv3 host table is related. | ||||
| Cospf3CurCfgHostIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 Address of the OSPFv3 host. | ||||
| Cospf3CurCfgHostAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| Cospf3CurCfgHostCost | 1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The cost of the OSPFv3 host. | ||||
| Cospf3CurCfgHostState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable an OSPFv3 Host
| ||||
| Tospf3NewCfgHostTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.5 | NA | ||
table · not-accessible · current The table of OSPFv3 Host configuration. | ||||
| Rospf3NewCfgHostEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1 | NA | ||
| Cospf3NewCfgHostIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 host number for which the OSPFv3 host table is related. | ||||
| Cospf3NewCfgHostIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The IP6 Address of the OSPFv3 host. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx | ||||
| Cospf3NewCfgHostAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The OSPFv3 area index. | ||||
| Cospf3NewCfgHostCost | 1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.4 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The cost of the OSPFv3 host. | ||||
| Cospf3NewCfgHostState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable an OSPFv3 Host
| ||||
| Cospf3NewCfgHostDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the OSPFv3 host: no(0), yes(1)
| ||||
| Tospf3CurCfgNbrTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.6 | NA | ||
table · not-accessible · current The table of OSPFv3 Neighbor configuration. | ||||
| Rospf3CurCfgNbrEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1 | NA | ||
| Cospf3CurCfgNbrIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 neighbor number for which the OSPFv3 neighbor table is related. | ||||
| Cospf3CurCfgNbrIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 Address of the OSPFv3 neighbor. | ||||
| Cospf3CurCfgNbrIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The interface index. | ||||
| Cospf3CurCfgNbrPriority | 1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.4 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The priority of the OSPFv3 neighbor. | ||||
| Cospf3CurCfgNbrState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable an OSPFv3 neighbor
| ||||
| Tospf3NewCfgNbrTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.7 | NA | ||
table · not-accessible · current The table of OSPFv3 Neighbor configuration. | ||||
| Rospf3NewCfgNbrEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1 | NA | ||
| Cospf3NewCfgNbrIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 neighbor number for which the OSPFv3 neighbor table is related. | ||||
| Cospf3NewCfgNbrIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The IP6 Address of the OSPFv3 neighbor. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx | ||||
| Cospf3NewCfgNbrIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The OSPFv3 interface index. | ||||
| Cospf3NewCfgNbrPriority | 1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.4 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The cost of the OSPFv3 neighbor. | ||||
| Cospf3NewCfgNbrState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable an OSPFv3 Neighbor
| ||||
| Cospf3NewCfgNbrDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the OSPFv3 neighbor: no(0), yes(1)
| ||||
| Tospf3CurCfgIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8 | NA | ||
table · not-accessible · current The table of OSPFv3 Interface in the current configuration block. | ||||
| Rospf3CurCfgIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1 | NA | ||
| Cospf3CurCfgIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 Interface number for which the OSPFv3 Interface table is related. | ||||
| Cospf3CurCfgIntfInstId | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.2 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current Interface Instance Id | ||||
| Cospf3CurCfgIntfArea | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.3 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the area that the interface belongs | ||||
| Cospf3CurCfgIntfCost | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.4 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current Interface cost | ||||
| Cospf3CurCfgIntfPrio | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.5 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Interface router priority | ||||
| Cospf3CurCfgIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval | ||||
| Cospf3CurCfgIntfDead | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.7 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval | ||||
| Cospf3CurCfgIntfPoll | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.8 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current Poll interval(1..4294967295) | ||||
| Cospf3CurCfgIntfTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.9 | INTEGER (1..1800) | RO | |
column · INTEGER (1..1800) · read-only · current Transmit delay | ||||
| Cospf3CurCfgIntfRetra | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.10 | INTEGER (1..1800) | RO | |
column · INTEGER (1..1800) · read-only · current Retransmit interval | ||||
| Cospf3CurCfgIntfPassive | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Passive interface
disabled(0),
enabled(1)
| ||||
| Cospf3CurCfgIntfNetworkType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Network Type. broadcast(1), non-broadcast(2), point-to-point(3), point-to-multipoint(4)
| ||||
| Cospf3CurCfgIntfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the interface
disabled(0),
enabled(1)
| ||||
| Cospf3CurCfgIntfAuthSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.17 | Unsigned32 (256..4294967295) | RO | |
column · Unsigned32 (256..4294967295) · read-only · current Spi Id(256 - 4294967295) | ||||
| Cospf3CurCfgIntfAuthEnable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0), enabled(1)
| ||||
| Cospf3CurCfgIntfAuthType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication Type none(0), md5(2), sha1(1)
| ||||
| Cospf3CurCfgIntfAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.20 | OCTET STRING (SIZE (4..40)) | RO | |
column · OCTET STRING (SIZE (4..40)) · read-only · current Authentication Key Hex-string MD5 key - 32 chars (128 bits) Hex-string SHA-1 key - 40 chars (160 bits) | ||||
| Cospf3CurCfgIntfEncrySpi | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.21 | Unsigned32 (256..4294967295) | RO | |
column · Unsigned32 (256..4294967295) · read-only · current Spi Id(256 - 4294967295) | ||||
| Cospf3CurCfgIntfEncryEnable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0), enabled(1)
| ||||
| Cospf3CurCfgIntfEncryType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Encryption Type null(0), 3des(2), aes(3)
| ||||
| Cospf3CurCfgIntfEncryKey | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.24 | OCTET STRING (SIZE (4..48)) | RO | |
column · OCTET STRING (SIZE (4..48)) · read-only · current Encryption Key Hex-string AES key - 32 chars (128 bits) Hex-string 3DES key - 48 chars (192 bits) | ||||
| Cospf3CurCfgIntfEncryAuthType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current Encryption Authentication Type none(0), md5(2), sha1(1)
| ||||
| Cospf3CurCfgIntfEncryAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.26 | OCTET STRING (SIZE (4..40)) | RO | |
column · OCTET STRING (SIZE (4..40)) · read-only · current Encryption Authentication Key Hex-string MD5 key - 32 chars (128 bits) Hex-string SHA-1 key - 40 chars (160 bits) | ||||
| Cospf3CurCfgIntfLsaSupress | 1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current LSA Supression on interface
disabled(0),
enabled(1)
| ||||
| Tospf3NewCfgIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9 | NA | ||
table · not-accessible · current The table of OSPFv3 interface in the new configuration block. | ||||
| Rospf3NewCfgIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1 | NA | ||
| Cospf3NewCfgIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 Interface number for which the OSPFv3 Interface table is related. | ||||
| Cospf3NewCfgIntfInstId | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.2 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current Interface Instance Id (0..255) | ||||
| Cospf3NewCfgIntfArea | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.3 | INTEGER (0..2) | RC | |
column · INTEGER (0..2) · read-create · current The index of the area that the interface belongs (0..2) | ||||
| Cospf3NewCfgIntfCost | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.4 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current Interface cost(1..65535) and 0 for none | ||||
| Cospf3NewCfgIntfPrio | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.5 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current Interface router priority(0..255) | ||||
| Cospf3NewCfgIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.6 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Hello interval(1..65535) | ||||
| Cospf3NewCfgIntfDead | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.7 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Dead interval(1..65535) | ||||
| Cospf3NewCfgIntfPoll | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.8 | Unsigned32 (1..4294967295) | RC | |
column · Unsigned32 (1..4294967295) · read-create · current Poll interval(1..4294967295) | ||||
| Cospf3NewCfgIntfTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.9 | INTEGER (1..1800) | RC | |
column · INTEGER (1..1800) · read-create · current Transmit delay(1..1800) | ||||
| Cospf3NewCfgIntfRetra | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.10 | INTEGER (1..1800) | RC | |
column · INTEGER (1..1800) · read-create · current Retransmit interval(1..1800) | ||||
| Cospf3NewCfgIntfPassive | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Passive interface
disabled(0),
enabled(1)
| ||||
| Cospf3NewCfgIntfNetworkType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Network Type. broadcast(1), non-broadcast(2), point-to-point(3), point-to-multipoint(4)
| ||||
| Cospf3NewCfgIntfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the interface
disabled(0),
enabled(1)
| ||||
| Cospf3NewCfgIntfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the interface other(0), delete(1)
| ||||
| Cospf3NewCfgIntfAuthSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.18 | Unsigned32 (256..4294967295) | RW | |
column · Unsigned32 (256..4294967295) · read-write · current Authentication Spi Id(256 - 4294967295) | ||||
| Cospf3NewCfgIntfAuthEnable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Authentication Status disabled(0), enabled(1)
| ||||
| Cospf3NewCfgIntfAuthType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current Authentication Type none(0), md5(2), sha1(1)
| ||||
| Cospf3NewCfgIntfAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.21 | OCTET STRING (SIZE (4..40)) | RW | |
column · OCTET STRING (SIZE (4..40)) · read-write · current Authentication Type Hex-string MD5 key - 32 chars (128 bits), Hex-string SHA-1 key - 40 chars (160 bits) | ||||
| Cospf3NewCfgIntfAuthReset | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current Reset AH configuration other(0), reset(1)
| ||||
| Cospf3NewCfgIntfEncrySpi | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.23 | Unsigned32 (256..4294967295) | RW | |
column · Unsigned32 (256..4294967295) · read-write · current Encryption Spi Id(256 - 4294967295) | ||||
| Cospf3NewCfgIntfEncryEnable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current Encryption Status disabled(0), enabled(1)
| ||||
| Cospf3NewCfgIntfEncryType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current Encryption Type null(0), 3des(2), aes(3)
| ||||
| Cospf3NewCfgIntfEncryKey | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.26 | OCTET STRING (SIZE (4..48)) | RW | |
column · OCTET STRING (SIZE (4..48)) · read-write · current Encryption Key Hex-string AES key - 32 chars (128 bits) Hex-string 3DES key - 48 chars (192 bits) | ||||
| Cospf3NewCfgIntfEncryAuthType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current Encryption Authentication Type none(0), md5(2), sha1(1)
| ||||
| Cospf3NewCfgIntfEncryAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.28 | OCTET STRING (SIZE (4..40)) | RW | |
column · OCTET STRING (SIZE (4..40)) · read-write · current Encryption Authentication Key Hex-string MD5 key - 32 chars (128 bits), Hex-string SHA-1 key - 40 chars (160 bits) | ||||
| Cospf3NewCfgIntfEncryReset | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.29 | INTEGER | RW | |
column · INTEGER · read-write · current Reset Encryption configuration other(0), reset(1)
| ||||
| Cospf3NewCfgIntfLsaSupress | 1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.30 | INTEGER | RC | |
column · INTEGER · read-create · current LSA Supression on interface
disabled(0),
enabled(1)
| ||||
| Tospf3CurCfgVirtIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10 | NA | ||
table · not-accessible · current The table of OSPFv3 Virtual Interface configuration in the current configuration. | ||||
| Rospf3CurCfgVirtIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1 | NA | ||
row · not-accessible · current Information about an OSPFv3v3 virtual Interface. | ||||
| Cospf3CurCfgVirtIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 Virtual Interface number for which the OSPFv3 Virtual Interface table is related. | ||||
| Cospf3CurCfgVirtIntfAreaId | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.3 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the OSPFv3 area to which this virtual interface belongs. | ||||
| Cospf3CurCfgVirtIntfNbr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPFv3 neighbor for this virtual interface. | ||||
| Cospf3CurCfgVirtIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval | ||||
| Cospf3CurCfgVirtIntfDead | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval | ||||
| Cospf3CurCfgVirtIntfTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.7 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Transmit delay | ||||
| Cospf3CurCfgVirtIntfRetra | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.8 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval | ||||
| Cospf3CurCfgVirtIntfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0), enabled(1)
| ||||
| Tospf3NewCfgVirtIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11 | NA | ||
table · not-accessible · current The table of OSPFv3 Virtual interface in the new configuration block. | ||||
| Rospf3NewCfgVirtIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1 | NA | ||
row · not-accessible · current Information about an OSPFv3 virtual interface. | ||||
| Cospf3NewCfgVirtIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 Virtual Interface number for which the OSPFv3 Virtual Interface table is related. | ||||
| Cospf3NewCfgVirtIntfAreaId | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.3 | INTEGER (0..2) | RC | |
column · INTEGER (0..2) · read-create · current The index of the OSPFv3 area to which this virtual interface belongs. | ||||
| Cospf3NewCfgVirtIntfNbr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the OSPFv3 neighbor for this virtual interface. | ||||
| Cospf3NewCfgVirtIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.5 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Hello interval(1..65535) | ||||
| Cospf3NewCfgVirtIntfDead | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.6 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Dead interval(1..65535) | ||||
| Cospf3NewCfgVirtIntfTrans | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.7 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Transmit delay(1..3600) | ||||
| Cospf3NewCfgVirtIntfRetra | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.8 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Retransmit interval(1..3600) | ||||
| Cospf3NewCfgVirtIntfStatus | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Status disabled(0), enabled(1)
| ||||
| Cospf3NewCfgVirtIntfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Delete
other(0),
delete(1)
| ||||
| Tospf3CurCfgRangeTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12 | NA | ||
table · not-accessible · current The table of OSPFv3 summary range in the current configuration. | ||||
| Rospf3CurCfgRangeEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1 | NA | ||
| Cospf3CurCfgRangeIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPFv3 summary range table is related. | ||||
| Cospf3CurCfgRangeAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 Address of the range. | ||||
| Cospf3CurCfgRangePrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.3 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The prefix length of the range. | ||||
| Cospf3CurCfgRangeAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| Cospf3CurCfgRangeHideState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the hide range.
| ||||
| Cospf3CurCfgRangeLsaType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The LSA type for aggregation. summary(8195), type7(8199)
| ||||
| Cospf3CurCfgRangeRouteTag | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.7 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The route tag of the range. | ||||
| Cospf3CurCfgRangeState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the range.
| ||||
| Tospf3NewCfgRangeTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13 | NA | ||
table · not-accessible · current The table of OSPFv3 summary range in the new configuration. | ||||
| Rospf3NewCfgRangeEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1 | NA | ||
| Cospf3NewCfgRangeIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPFv3 summary range table is related. | ||||
| Cospf3NewCfgRangeAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The IPv6 Address of the range. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx | ||||
| Cospf3NewCfgRangePrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.3 | INTEGER (1..128) | RC | |
column · INTEGER (1..128) · read-create · current The prefix length of the range. | ||||
| Cospf3NewCfgRangeAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The area index. | ||||
| Cospf3NewCfgRangeHideState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the hide range.
| ||||
| Cospf3NewCfgRangeLsaType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The LSA type for aggregation. summary(8195), type7(8199)
| ||||
| Cospf3NewCfgRangeRouteTag | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.7 | Unsigned32 (0..4294967295) | RC | |
column · Unsigned32 (0..4294967295) · read-create · current The route tag of the range. | ||||
| Cospf3NewCfgRangeState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the range.
| ||||
| Cospf3NewCfgRangeDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| Tospf3CurCfgExtRangeTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14 | NA | ||
table · not-accessible · current The table of OSPFv3 AS-External range in the current configuration. | ||||
| Rospf3CurCfgExtRangeEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1 | NA | ||
row · not-accessible · current Information about an OSPFv3 AS-External range. | ||||
| Cospf3CurCfgExtRangeIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPFv3 AS-External range table is related. | ||||
| Cospf3CurCfgExtRangeAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 Address of the AS-External range. | ||||
| Cospf3CurCfgExtRangePrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.3 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The prefix length of the AS-External range. | ||||
| Cospf3CurCfgExtRangeAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| Cospf3CurCfgExtRangeTranslation | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the setting the P-bit in the generated LSA.
| ||||
| Cospf3CurCfgExtRangeAggrEffect | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The aggregation effect. advertise(1), not-advertise(2), allowAll(3), denyAll(4)
| ||||
| Cospf3CurCfgExtRangeState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the AS-External range.
| ||||
| Tospf3NewCfgExtRangeTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15 | NA | ||
table · not-accessible · current The table of OSPFv3 summary AS-External range in the new configuration. | ||||
| Rospf3NewCfgExtRangeEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1 | NA | ||
row · not-accessible · current Information about an OSPFv3 summary AS-External range. | ||||
| Cospf3NewCfgExtRangeIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPFv3 AS-External range table is related. | ||||
| Cospf3NewCfgExtRangeAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The IPv6 Address of the AS-External range. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx | ||||
| Cospf3NewCfgExtRangePrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.3 | INTEGER (1..128) | RC | |
column · INTEGER (1..128) · read-create · current The prefix length of the AS-External range. | ||||
| Cospf3NewCfgExtRangeAreaIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The area index. | ||||
| Cospf3NewCfgExtRangeTranslation | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the setting the P-bit in the generated LSA.
| ||||
| Cospf3NewCfgExtRangeAggrEffect | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The aggregation effect. advertise(1), not-advertise(2), allowAll(3), denyAll(4)
| ||||
| Cospf3NewCfgExtRangeState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the AS-External range.
| ||||
| Cospf3NewCfgExtRangeDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| Tospf3CurCfgRedistTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16 | NA | ||
table · not-accessible · current The table of OSPFv3 redistribution entries in the current configuration. | ||||
| Rospf3CurCfgRedistEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1 | NA | ||
row · not-accessible · current Information about an OSPFv3 redistribution entry. | ||||
| Cospf3CurCfgRedistIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The redistribution entry number for which the OSPFv3 redistribution entry table is related. | ||||
| Cospf3CurCfgRedistAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 Address of the redistribution entry. | ||||
| Cospf3CurCfgRedistPrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.3 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The prefix length of the redistribution entry. | ||||
| Cospf3CurCfgRedistMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.4 | INTEGER (1..16777215) | RO | |
column · INTEGER (1..16777215) · read-only · current The metric to be applied to the route. | ||||
| Cospf3CurCfgRedistMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The metric type. asExttype1(3), asExttype2(4)
| ||||
| Cospf3CurCfgRedistRouteTag | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.6 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The route tag of the redistribution entry. | ||||
| Cospf3CurCfgRedistRouteTagTypeManual | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates if the route tag is set manually.
| ||||
| Cospf3CurCfgRedistState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the redistribution entry.
| ||||
| Tospf3NewCfgRedistTable | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17 | NA | ||
table · not-accessible · current The table of OSPFv3 summary redistribution entry in the new configuration. | ||||
| Rospf3NewCfgRedistEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1 | NA | ||
row · not-accessible · current Information about an OSPFv3 summary redistribution entry. | ||||
| Cospf3NewCfgRedistIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The redistribution entry number for which the OSPFv3 redistribution entry table is related. | ||||
| Cospf3NewCfgRedistAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The IPv6 Address of the redistribution entry. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx | ||||
| Cospf3NewCfgRedistPrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.3 | INTEGER (1..128) | RC | |
column · INTEGER (1..128) · read-create · current The prefix length of the redistribution entry. | ||||
| Cospf3NewCfgRedistMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.4 | INTEGER (1..16777215) | RC | |
column · INTEGER (1..16777215) · read-create · current The metric to be applied to the route. | ||||
| Cospf3NewCfgRedistMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The metric type. asExttype1(3), asExttype2(4)
| ||||
| Cospf3NewCfgRedistRouteTag | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.6 | Unsigned32 (0..4294967295) | RC | |
column · Unsigned32 (0..4294967295) · read-create · current The route tag of the redistribution entry. | ||||
| Cospf3NewCfgRedistRouteTagTypeManual | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates if the route tag is set manually.
| ||||
| Cospf3NewCfgRedistState | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the redistribution entry.
| ||||
| Cospf3NewCfgRedistDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| Nospf3RouteRedistribution | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18 | |||
| Nospf3RedistributeConnected | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1 | |||
| Sospf3CurCfgConnectedMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.1 | INTEGER (0..16777215) | RO | |
scalar · INTEGER (0..16777215) · read-only · current The metric to be assigned to Connected routes. | ||||
| Sospf3NewCfgConnectedMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.2 | INTEGER (0..16777215) | RW | |
scalar · INTEGER (0..16777215) · read-write · current The metric to be assigned to Connected routes. | ||||
| Sospf3CurCfgConnectedMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for Connected routes.
| ||||
| Sospf3NewCfgConnectedMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for Connected routes.
| ||||
| Sospf3CurCfgConnectedRouteTag | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.5 | Unsigned32 (0..4294967295) | RO | |
scalar · Unsigned32 (0..4294967295) · read-only · current Assigned route tag | ||||
| Sospf3NewCfgConnectedRouteTag | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.6 | Unsigned32 (0..4294967295) | RW | |
scalar · Unsigned32 (0..4294967295) · read-write · current Assigned route tag | ||||
| Sospf3CurCfgConnectedRouteTagTypeManual | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates if the route tag is set manually.
| ||||
| Sospf3NewCfgConnectedRouteTagTypeManual | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates if the route tag is set manually.
| ||||
| Nospf3RedistributeStatic | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2 | |||
| Sospf3CurCfgStaticMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.1 | INTEGER (0..16777215) | RO | |
scalar · INTEGER (0..16777215) · read-only · current The metric to be assigned to static routes. | ||||
| Sospf3NewCfgStaticMetric | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.2 | INTEGER (0..16777215) | RW | |
scalar · INTEGER (0..16777215) · read-write · current The metric to be assigned to static routes. | ||||
| Sospf3CurCfgStaticMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for static routes.
| ||||
| Sospf3NewCfgStaticMetricType | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for static routes.
| ||||
| Sospf3CurCfgStaticRouteTag | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.5 | Unsigned32 (0..4294967295) | RO | |
scalar · Unsigned32 (0..4294967295) · read-only · current Assigned route tag | ||||
| Sospf3NewCfgStaticRouteTag | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.6 | Unsigned32 (0..4294967295) | RW | |
scalar · Unsigned32 (0..4294967295) · read-write · current Assigned route tag | ||||
| Sospf3CurCfgStaticRouteTagTypeManual | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates if the route tag is set manually.
| ||||
| Sospf3NewCfgStaticRouteTagTypeManual | 1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates if the route tag is set manually.
| ||||
| NpptCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.27 | |||
| SpptTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.27.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the Prefix policy table. | ||||
| TpptCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.27.2 | NA | ||
table · not-accessible · current The table of prefix policy table entries in the current configuration block. | ||||
| RpptCurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1 | NA | ||
| CpptCurCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the prefix policy table. | ||||
| CpptCurCfgPrefix | 1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The prefix address for the prefix policy table entry. | ||||
| CpptCurCfgPrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The prefix length for the prefix policy table entry. | ||||
| CpptCurCfgPrecedence | 1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The precedence for the prefix policy table entry. | ||||
| CpptCurCfgLabel | 1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The label for the prefix policy table entry. | ||||
| TpptNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.27.3 | NA | ||
table · not-accessible · current The table of prefix policy table entries in the new configuration block. | ||||
| RpptNewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1 | NA | ||
| CpptNewCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the prefix policy table. | ||||
| CpptNewCfgPrefix | 1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.2 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current The prefix address for the prefix policy table entry. | ||||
| CpptNewCfgPrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The prefix length the prefix policy table entry. | ||||
| CpptNewCfgPrecedence | 1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The precedence for the prefix policy table entry. | ||||
| CpptNewCfgLabel | 1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The label for the prefix policy table entry. | ||||
| CpptNewCfgAction | 1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| Nipv6pmtuCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.28 | |||
| Sipv6PmtuCurTimeout | 1.3.6.1.4.1.20301.2.7.15.3.1.28.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current IPv6 PMTU Expired Time Value(0|10-100), 0 indicates INFINITY. Other values should be in [10, 100] | ||||
| Sipv6PmtuNewTimeout | 1.3.6.1.4.1.20301.2.7.15.3.1.28.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current IPv6 PMTU Expired Time Value(0|10-100), 0 indicates INFINITY. Other values should be in [10, 100] | ||||
| Sipv6PmtuEntriesClearAll | 1.3.6.1.4.1.20301.2.7.15.3.1.28.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to clear(2),clears all ipv6 PMTU entries. Otherwhise nothing is done.
| ||||
| NfloodingCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.29 | |||
| TvlanFloodCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.29.1 | NA | ||
table · not-accessible · current The table of VLAN flooding configuration. | ||||
| RvlanFloodCurCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1 | NA | ||
row · not-accessible · current A row in the VLAN flooding configuration table. | ||||
| CvlanFloodCurCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier. | ||||
| CvlanFloodCurCfgFlood | 1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable flooding unregistered IPMCs
| ||||
| CvlanFloodCurCfgCpu | 1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable sending unregistered IPMCs to CPU
| ||||
| CvlanFloodCurCfgOptFlood | 1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable optimized flooding
| ||||
| TvlanFloodNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.29.2 | NA | ||
table · not-accessible · current The table of VLAN flooding configuration. | ||||
| RvlanFloodNewCfgTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1 | NA | ||
row · not-accessible · current A row in the VLAN flooding configuration table. | ||||
| CvlanFloodNewCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier. | ||||
| CvlanFloodNewCfgFlood | 1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable flooding unregistered IPMCs
| ||||
| CvlanFloodNewCfgCpu | 1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable sending unregistered IPMCs to CPU
| ||||
| CvlanFloodNewCfgOptFlood | 1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable optimized flooding
| ||||
| NmldCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.30 | |||
| SmldCurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.30.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current MLD global state.
| ||||
| SmldNewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.30.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current MLD global state.
| ||||
| TmldCurInterfaceTable | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3 | NA | ||
table · not-accessible · current The (conceptual) table listing the interfaces on which MLD is enabled. | ||||
| RmldCurInterfaceEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing an interface on which MLD is enabled. | ||||
| CmldCurInterfaceIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The internetwork-layer interface value of the interface for which MLD is enabled. | ||||
| CmldCurInterfaceQueryInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The frequency at which MLD Host-Query packets are transmitted on this interface.
| ||||
| CmldCurInterfaceVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The version of MLD which is running on this interface. This object is a place holder to allow for new versions of MLD to be introduced. Version 1 of MLD is defined in RFC 2710.
| ||||
| CmldCurInterfaceQueryMaxResponseIntvl | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The maximum query response time advertised in MLD queries on this interface.
| ||||
| CmldCurInterfaceRobustness | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. MLD is robust to (Robustness Variable-1) packet losses. The discussion of the Robustness Variable is in Section 7.1 of RFC 2710. | ||||
| CmldCurInterfaceLastListenQueryIntvl | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The Last Member Query Interval is the Max Response Delay inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.
| ||||
| CmldCurInterfaceDMrtrEna | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Dynamic MRouter learning.
| ||||
| CmldCurInterfaceState | 1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current State of the MLD interface.
| ||||
| TmldNewInterfaceTable | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4 | NA | ||
table · not-accessible · current The (conceptual) table listing the interfaces on which MLD is enabled. | ||||
| RmldNewInterfaceEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing an interface on which MLD is enabled. | ||||
| CmldNewInterfaceIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The internetwork-layer interface value of the interface for which MLD is enabled. | ||||
| CmldNewInterfaceQueryInterval | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.2 | INTEGER (2..65535) | RW | |
column · INTEGER (2..65535) · read-write · current The frequency at which MLD Host-Query packets are transmitted on this interface.
| ||||
| CmldNewInterfaceVersion | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The version of MLD which is running on this interface. This object is a place holder to allow for new versions of MLD to be introduced. Version 1 of MLD is defined in RFC 2710.
| ||||
| CmldNewInterfaceQueryMaxResponseIntvl | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.4 | INTEGER (1000..65535) | RW | |
column · INTEGER (1000..65535) · read-write · current The maximum query response time advertised in MLD queries on this interface.
| ||||
| CmldNewInterfaceRobustness | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.5 | INTEGER (1..10) | RW | |
column · INTEGER (1..10) · read-write · current The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. MLD is robust to (Robustness Variable-1) packet losses. The discussion of the Robustness Variable is in Section 7.1 of RFC 2710. | ||||
| CmldNewInterfaceLastListenQueryIntvl | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.6 | INTEGER (1..32) | RW | |
column · INTEGER (1..32) · read-write · current The Last Member Query Interval is the Max Response Delay inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.
| ||||
| CmldNewInterfaceDMrtrEna | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Dynamic MRouter learning.
| ||||
| CmldNewInterfaceState | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current State of the MLD interface.
| ||||
| CmldNewInterfaceDefault | 1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Action to set the MLD interface configuration to default. Returns other(1) when read.
| ||||
| SmldDefaultCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.30.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action to set the global MLD configuration to default. Returns other(1) when read.
| ||||
| NndprefixCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.31 | |||
| SndprefixTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.3.1.31.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the NDPrefix table. | ||||
| TndprefixCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2 | NA | ||
table · not-accessible · current The ndprefix table entries in the current configuration block. | ||||
| RndprefixCurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1 | NA | ||
| CndprefixCurCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.1 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The index of the ndprefix table. | ||||
| CndprefixCurCfgPrefix | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The prefix address for the prefix table entry. | ||||
| CndprefixCurCfgPrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.3 | INTEGER (0..128) | RO | |
column · INTEGER (0..128) · read-only · current The prefix length for the prefix table entry. | ||||
| CndprefixCurCfgInterfaceIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The interface index for the prefix table entry. | ||||
| CndprefixCurCfgProfileIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.5 | INTEGER (0..127) | RO | |
column · INTEGER (0..127) · read-only · current The profile index for the prefix table entry Profile 0 is the default profile. | ||||
| CndprefixCurCfgValidLifetime | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.6 | Gauge32 (0..4294967295) | RO | |
column · Gauge32 (0..4294967295) · read-only · current The Valid lifetime for the prefix table entry. | ||||
| CndprefixCurCfgValidLifetimeFlag | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The Valid lifetime fixed flag for the prefix table entry.
| ||||
| CndprefixCurCfgPreferredLifetime | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.8 | Gauge32 (0..4294967295) | RO | |
column · Gauge32 (0..4294967295) · read-only · current The Preferred Lifetime for the prefix table entry. | ||||
| CndprefixCurCfgPreferredLifetimeFlag | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The Preferred Lifetime fixed flag for the prefix table entry.
| ||||
| CndprefixCurCfgOnlinkFlag | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The Onlink flag for the prefix table entry.
| ||||
| CndprefixCurCfgAutonomousFlag | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The Autonomous flag for the prefix table entry.
| ||||
| CndprefixCurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The state for the prefix table entry.
| ||||
| TndprefixNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3 | NA | ||
table · not-accessible · current The ndprefix table entries in the new configuration block. | ||||
| RndprefixNewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1 | NA | ||
| CndprefixNewCfgIndx | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the prefix table. | ||||
| CndprefixNewCfgPrefix | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current The prefix address for the prefix table entry. | ||||
| CndprefixNewCfgPrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.3 | INTEGER (0..128) | RC | |
column · INTEGER (0..128) · read-create · current The prefix length for the prefix table entry. | ||||
| CndprefixNewCfgInterfaceIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The interface index for the prefix table entry. | ||||
| CndprefixNewCfgProfileIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.5 | INTEGER (0..127) | RC | |
column · INTEGER (0..127) · read-create · current The profile index for the prefix table entry. Profile 0 is the default profile. | ||||
| CndprefixNewCfgValidLifetime | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.6 | Gauge32 (0..4294967295) | RC | |
column · Gauge32 (0..4294967295) · read-create · current The Valid lifetime for the prefix table entry. | ||||
| CndprefixNewCfgValidLifetimeFlag | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The Valid lifetime fixed flag for the prefix table entry.
| ||||
| CndprefixNewCfgPreferredLifetime | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.8 | Gauge32 (0..4294967295) | RC | |
column · Gauge32 (0..4294967295) · read-create · current The Preferred Lifetime for the prefix table entry. | ||||
| CndprefixNewCfgPreferredLifetimeFlag | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current The Preferred Lifetime fixed flag for the prefix table entry.
| ||||
| CndprefixNewCfgOnlinkFlag | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current The Onlink flag for the prefix table entry.
| ||||
| CndprefixNewCfgAutonomousFlag | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current The Autonomous flag for the prefix table entry.
| ||||
| CndprefixNewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The state for the prefix table entry.
| ||||
| CndprefixNewCfgAction | 1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When set to the value of 3 (deleteall), all entries are deleted. When read, other is returned. Setting the value to anything other than 2(delete) or 3(deleteall) has no effect on the state of the row.
| ||||
| NipsecCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.32 | |||
| NikeGroup | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1 | |||
| NikeCurCfgProposal | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.1 | |||
| SikeCurCfgPropCipher | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current encription algorithm used by IKEv2
| ||||
| SikeCurCfgPropAuth | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current authentication algorithm used by IKEv2
| ||||
| SikeCurCfgPropGroup | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current Diffie-Hellman groups used by IKEv2
| ||||
| NikeNewCfgProposal | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.2 | |||
| SikeNewCfgPropCipher | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current New encription algorithm used by IKEv2
| ||||
| SikeNewCfgPropAuth | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current New authentication algorithm used by IKEv2
| ||||
| SikeNewCfgPropGroup | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current New Diffie-Hellman groups used by IKEv2
| ||||
| NikeCurCfgPsk | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3 | |||
| SikeCurCfgPskLocalKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.1 | IPsecKeyString (SIZE (1..256)) | RO | |
scalar · IPsecKeyString (SIZE (1..256)) · read-only · current Current local pre-shared key. | ||||
| TikeCurCfgPskRemoteTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2 | NA | ||
table · not-accessible · current The (conceptual) table listing the remote pre-shared key by peer address used by IKEv2. | ||||
| RikeCurCfgPskRemoteEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a remote pre-shared key for a peer address. | ||||
| CikeCurCfgPskRemoteIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ikeCurCfgPskRemoteTable. | ||||
| CikeCurCfgPskRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1.2 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current Current IPv6 address of peer. | ||||
| CikeCurCfgPskRemoteKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1.3 | IPsecKeyString (SIZE (1..256)) | RO | |
column · IPsecKeyString (SIZE (1..256)) · read-only · current Current remote pre-shared key. | ||||
| CikeCurCfgPskRemoteDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| NikeNewCfgPsk | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4 | |||
| SikeNewCfgPskLocalKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.1 | IPsecKeyString (SIZE (1..256)) | RW | |
scalar · IPsecKeyString (SIZE (1..256)) · read-write · current New local pre-shared key. | ||||
| TikeNewCfgPskRemoteTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2 | NA | ||
table · not-accessible · current The (conceptual) table listing the remote pre-shared key by peer address used by IKEv2. | ||||
| RikeNewCfgPskRemoteEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a remote pre-shared key for a peer address. | ||||
| CikeNewCfgPskRemoteIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ikeNewCfgPskRemoteTable. | ||||
| CikeNewCfgPskRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1.2 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current New IPv6 address of peer. | ||||
| CikeNewCfgPskRemoteKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1.3 | IPsecKeyString (SIZE (1..256)) | RC | |
column · IPsecKeyString (SIZE (1..256)) · read-create · current New remote pre-shared key. | ||||
| CikeNewCfgPskRemoteDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| NikeCurCfgIdentity | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.5 | |||
| SikeCurCfgIdType | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.5.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specifies the type of Identification being used.
| ||||
| SikeCurCfgIdData | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.5.2 | DisplayString (SIZE (1..100)) | RO | |
scalar · DisplayString (SIZE (1..100)) · read-only · current Value as indicated by the Identification Type. It can be a fully-qualified domain name string (example.com) or a fully-qualified email address string ([email protected]). | ||||
| NikeNewCfgIdentity | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.6 | |||
| SikeNewCfgIdType | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.6.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the type of Identification being used.
| ||||
| SikeNewCfgIdData | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.6.2 | DisplayString (SIZE (1..100)) | RW | |
scalar · DisplayString (SIZE (1..100)) · read-write · current Value as indicated by the Identification Type. It can be a fully-qualified domain name string (example.com) or a fully-qualified email address string ([email protected]). | ||||
| SikeCurCfgTxTimeout | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.7 | Unsigned32 (1..15) | RO | |
scalar · Unsigned32 (1..15) · read-only · current The value of this object specify the IKEv2 PDU retransmission timeout in seconds. | ||||
| SikeNewCfgTxTimeout | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.8 | Unsigned32 (1..15) | RW | |
scalar · Unsigned32 (1..15) · read-write · current The value of this object specify the new IKEv2 PDU retransmission timeout. | ||||
| SikeCurCfgCookie | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Globally enable/disable IKEv2 cookie notify.
| ||||
| SikeNewCfgCookie | 1.3.6.1.4.1.20301.2.7.15.3.1.32.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally enable/disable IKEv2 cookie notify.
| ||||
| NipsecGroup | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2 | |||
| SipsecCurCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Globally enable/disable IPsec.
| ||||
| SipsecNewCfgState | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally enable/disable IPsec.
| ||||
| TipsecCurCfgTxformTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec transform-set. | ||||
| RipsecCurCfgTxformEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec transform-set. | ||||
| CipsecCurCfgTxformIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ipsecCurCfgTxformTable. | ||||
| CipsecCurCfgTxformAuth | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The authentication algorithm of the IPsec transform-set
| ||||
| CipsecCurCfgTxformCipher | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The encryption algorithm of the IPsec transform-set
| ||||
| CipsecCurCfgTxformIntegrity | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The interity algorithm of the IPsec transform-set
| ||||
| CipsecCurCfgTxformMode | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The tunnel/transport mode of the IPsec transform-set
| ||||
| CipsecCurCfgTxformDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecNewCfgTxformTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the new IPsec transform-set to be apply. | ||||
| RipsecNewCfgTxformEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec transform-set. | ||||
| CipsecNewCfgTxformIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ipsecNewCfgTxformTable. | ||||
| CipsecNewCfgTxformAuth | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The authentication algorithm of the IPsec transform-set
| ||||
| CipsecNewCfgTxformCipher | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The encryption algorithm of the IPsec transform-set
| ||||
| CipsecNewCfgTxformIntegrity | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The interity algorithm of the IPsec transform-set
| ||||
| CipsecNewCfgTxformMode | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The tunnel/transport mode of the IPsec transform-set
| ||||
| CipsecNewCfgTxformDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecCurCfgSelectorTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec selector. | ||||
| RipsecCurCfgSelectorEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec selector. | ||||
| CipsecCurCfgSelectorIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ipsecCurCfgSelectorTable. | ||||
| CipsecCurCfgSelectorAction | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The action of the IPsec selector
| ||||
| CipsecCurCfgSelectorProto | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The protocol of the IPsec selector
| ||||
| CipsecCurCfgSelectorIcmpType | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.4 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current When the protocol of the IPsec selector is icmp(2), This object specify the ICMP type for the traffic selector. 0 = any. | ||||
| CipsecCurCfgSelectorDst | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.6 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The destination ip address of the IPsec selector | ||||
| CipsecCurCfgSelectorDstPrefix | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.7 | Unsigned32 (1..128) | RO | |
column · Unsigned32 (1..128) · read-only · current The destination ipv6 address prefix length of the IPsec selector | ||||
| CipsecCurCfgSelectorSrc | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.8 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The source ip address of the IPsec selector | ||||
| CipsecCurCfgSelectorDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecNewCfgSelectorTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec selector. | ||||
| RipsecNewCfgSelectorEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec selector. | ||||
| CipsecNewCfgSelectorIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ipsecNewCfgSelectorTable. | ||||
| CipsecNewCfgSelectorAction | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The action of the IPsec selector
| ||||
| CipsecNewCfgSelectorProto | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The protocol of the IPsec selector
| ||||
| CipsecNewCfgSelectorIcmpType | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.4 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current When the protocol of the IPsec selector is icmp(2), This object specify the ICMP type for the traffic selector. 0 = any. | ||||
| CipsecNewCfgSelectorDst | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.6 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current The destination ipv6 address of the IPsec selector | ||||
| CipsecNewCfgSelectorDstPrefix | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.7 | Unsigned32 (1..128) | RC | |
column · Unsigned32 (1..128) · read-create · current The destination ipv6 address prefix length of the IPsec selector | ||||
| CipsecNewCfgSelectorSrc | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.8 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current The source ip address of the IPsec selector | ||||
| CipsecNewCfgSelectorDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecCurCfgDynamicPolicyTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec dynamic policies. | ||||
| RipsecCurCfgDynamicPolicyEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec dynamic policy. | ||||
| CipsecCurCfgDynamicPolicyIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ipsecCurCfgDynamicPolicyTable. | ||||
| CipsecCurCfgDynamicPolicyPeer | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.2 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The remote peer ip address. | ||||
| CipsecCurCfgDynamicPolicySelector | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.3 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTable. 0 = unspecified. | ||||
| CipsecCurCfgDynamicPolicyTxform | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.4 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTable. 0 = unspecified. | ||||
| CipsecCurCfgDynamicPolicyLifetime | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.5 | Unsigned32 (120..86400) | RO | |
column · Unsigned32 (120..86400) · read-only · current The SA lifetime for an IPsec policy. | ||||
| CipsecCurCfgDynamicPolicyPfs | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable perfect forward security.
| ||||
| CipsecCurCfgDynamicPolicyDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecNewCfgDynamicPolicyTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec dynamic policies. | ||||
| RipsecNewCfgDynamicPolicyEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec dynamic policy. | ||||
| CipsecNewCfgDynamicPolicyIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ipsecNewCfgDynamicPolicyTable. | ||||
| CipsecNewCfgDynamicPolicyPeer | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.2 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current The remote peer ip address. | ||||
| CipsecNewCfgDynamicPolicySelector | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.3 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTable. 0 = unspecified. | ||||
| CipsecNewCfgDynamicPolicyTxform | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.4 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTable. 0 = unspecified. | ||||
| CipsecNewCfgDynamicPolicyLifetime | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.5 | Unsigned32 (120..86400) | RC | |
column · Unsigned32 (120..86400) · read-create · current The SA lifetime for an IPsec policy. | ||||
| CipsecNewCfgDynamicPolicyPfs | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable perfect forward security.
| ||||
| CipsecNewCfgDynamicPolicyDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecCurCfgManualPolicyTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec manual policies. | ||||
| RipsecCurCfgManualPolicyEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec manual policy. | ||||
| CipsecCurCfgManualPolicyIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ipsecCurCfgManualPolicyTable. | ||||
| CipsecCurCfgManualPolicyPeer | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.2 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The remote peer ip address. | ||||
| CipsecCurCfgManualPolicySelector | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.3 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTable | ||||
| CipsecCurCfgManualPolicyTxform | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.4 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTable | ||||
| CipsecCurCfgManualPolicyInAhKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.5 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The AH inbound session key for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyInAhSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.6 | Unsigned32 (0 | 256..4294967295) | RO | |
column · Unsigned32 (0 | 256..4294967295) · read-only · current The AH inbound SPI for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyOutAhKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.7 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The AH outbound session key for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyOutAhSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.8 | Unsigned32 (0 | 256..4294967295) | RO | |
column · Unsigned32 (0 | 256..4294967295) · read-only · current The AH outbound SPI for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyInEspEncKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.9 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The Esp inbound cipher key for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyInEspAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.10 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The Esp inbound authenticator key for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyInEspSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.11 | Unsigned32 (0 | 256..4294967295) | RO | |
column · Unsigned32 (0 | 256..4294967295) · read-only · current The Esp inbound SPI for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyOutEspEncKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.12 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The Esp outbound cipher key for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyOutEspAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.13 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The Esp outbound authenticator key for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyOutEspSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.14 | Unsigned32 (0 | 256..4294967295) | RO | |
column · Unsigned32 (0 | 256..4294967295) · read-only · current The Esp outbound SPI for an IPsec policy. | ||||
| CipsecCurCfgManualPolicyDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecNewCfgManualPolicyTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec manual policies. | ||||
| RipsecNewCfgManualPolicyEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec manual policy. | ||||
| CipsecNewCfgManualPolicyIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.1 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The index of ipsecNewCfgManualPolicyTable. | ||||
| CipsecNewCfgManualPolicyPeer | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.2 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current The remote peer ip address. | ||||
| CipsecNewCfgManualPolicySelector | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.3 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTable | ||||
| CipsecNewCfgManualPolicyTxform | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.4 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTable | ||||
| CipsecNewCfgManualPolicyInAhKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.5 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current The AH inbound session key for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyInAhSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.6 | Unsigned32 (0 | 256..4294967295) | RC | |
column · Unsigned32 (0 | 256..4294967295) · read-create · current The AH inbound SPI for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyOutAhKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.7 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current The AH outbound session key for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyOutAhSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.8 | Unsigned32 (0 | 256..4294967295) | RC | |
column · Unsigned32 (0 | 256..4294967295) · read-create · current The AH outbound SPI for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyInEspEncKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.9 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current The Esp inbound cipher key for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyInEspAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.10 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current The Esp inbound authenticator key for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyInEspSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.11 | Unsigned32 (0 | 256..4294967295) | RC | |
column · Unsigned32 (0 | 256..4294967295) · read-create · current The Esp inbound SPI for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyOutEspEncKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.12 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current The Esp outbound cipher key for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyOutEspAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.13 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current The Esp outbound authenticator key for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyOutEspSpi | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.14 | Unsigned32 (0 | 256..4294967295) | RC | |
column · Unsigned32 (0 | 256..4294967295) · read-create · current The Esp outbound SPI for an IPsec policy. | ||||
| CipsecNewCfgManualPolicyDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecCurCfgIfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11 | NA | ||
table · not-accessible · current The table of interface IPsec policy configuration. | ||||
| RipsecCurCfgIfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1 | NA | ||
row · not-accessible · current The table of interface IPsec policy configuration.
| ||||
| CipsecCurCfgIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The identifier of a particular interface. | ||||
| CipsecCurCfgIfDynamicPolicyBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1.2 | OCTET STRING (SIZE (0..4)) | RO | |
column · OCTET STRING (SIZE (0..4)) · read-only · current The IPsec dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface. | ||||
| CipsecCurCfgIfManualPolicyBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1.5 | OCTET STRING (SIZE (0..4)) | RO | |
column · OCTET STRING (SIZE (0..4)) · read-only · current The manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface. | ||||
| CipsecCurCfgIfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| TipsecNewCfgIfTable | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12 | NA | ||
table · not-accessible · current The table of interface IPsec policy configuration. | ||||
| RipsecNewCfgIfEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1 | NA | ||
row · not-accessible · current The table of interface IPsec policy configuration.
| ||||
| CipsecNewCfgIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The identifier of a particular interface. | ||||
| CipsecNewCfgIfDynamicPolicyBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.2 | OCTET STRING (SIZE (0..4)) | RO | |
column · OCTET STRING (SIZE (0..4)) · read-only · current The dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface. | ||||
| CipsecNewCfgIfAddDynamicPolicy | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.3 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current Set the value to a IPsec dynamic policy ID when add the policy to IP interface. A value of 0 is always returned when this object is read. | ||||
| CipsecNewCfgIfDelDynamicPolicy | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.4 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current Set the value to a IPsec dynamic policy ID when delete the policy to IP interface. A value of 0 is always returned when this object is read. | ||||
| CipsecNewCfgIfManualPolicyBmap | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.5 | OCTET STRING (SIZE (0..4)) | RO | |
column · OCTET STRING (SIZE (0..4)) · read-only · current The manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface. | ||||
| CipsecNewCfgIfAddManualPolicy | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.6 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current Set the value to a IPsec manual policy ID when add the policy to IP interface. A value of 0 is always returned when this object is read. | ||||
| CipsecNewCfgIfDelManualPolicy | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.7 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current Set the value to a IPsec manual policy ID when delete the policy to IP interface. A value of 0 is always returned when this object is read. | ||||
| CipsecNewCfgIfDelete | 1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Set a value of delete(2) for this object will delete the entry, A value of other(1) is always returned when this object is read.
| ||||
| NdhcpsnpCfg | 1.3.6.1.4.1.20301.2.7.15.3.1.33 | |||
| SdhcpSnoopingCurCfgOnState | 1.3.6.1.4.1.20301.2.7.15.3.1.33.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current DHCP Snooping ON/OFF settings.
| ||||
| SdhcpSnoopingNewCfgOnState | 1.3.6.1.4.1.20301.2.7.15.3.1.33.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP Snooping ON/OFF setting.
| ||||
| SdhcpSnoopingCurCfgOption82OnState | 1.3.6.1.4.1.20301.2.7.15.3.1.33.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current on/off state of DHCP Snooping option82.
| ||||
| SdhcpSnoopingNewCfgOption82OnState | 1.3.6.1.4.1.20301.2.7.15.3.1.33.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable DHCP Snooping option82
| ||||
| TdhcpSnoopingCurCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.3.1.33.5 | NA | ||
table · not-accessible · current DHCP Snooping Port Configuration Table. | ||||
| RdhcpSnoopingCurCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.33.5.1 | NA | ||
row · not-accessible · current A row in DHCP Snooping Port Configuration Table | ||||
| CdhcpSnoopingCurCfgPortId | 1.3.6.1.4.1.20301.2.7.15.3.1.33.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Port ID of this DHCP Snooping port configration. | ||||
| CdhcpSnoopingCurCfgPortTrusted | 1.3.6.1.4.1.20301.2.7.15.3.1.33.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Set port as trusted or untrusted port.
| ||||
| CdhcpSnoopingCurCfgPortRateLimit | 1.3.6.1.4.1.20301.2.7.15.3.1.33.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Set port DHCP packet rate limit(pps). Its ranges is 0 ~ 2048, set 0 to disable rate limit. | ||||
| TdhcpSnoopingNewCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.3.1.33.6 | NA | ||
table · not-accessible · current DHCP Snooping Port Configuration Table. | ||||
| RdhcpSnoopingNewCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.33.6.1 | NA | ||
row · not-accessible · current A row in the DHCP Snooping Port Configuration Table | ||||
| CdhcpSnoopingNewCfgportId | 1.3.6.1.4.1.20301.2.7.15.3.1.33.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Port ID of this DHCP Snooping port configration. | ||||
| CdhcpSnoopingNewCfgportTrusted | 1.3.6.1.4.1.20301.2.7.15.3.1.33.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set port as trusted or untrusted port.
| ||||
| CdhcpSnoopingNewCfgportRateLimit | 1.3.6.1.4.1.20301.2.7.15.3.1.33.6.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Set port DHCP packet rate limit(pps). Set 0 to disable rate limit. | ||||
| TdhcpSnoopingCurCfgVlanTable | 1.3.6.1.4.1.20301.2.7.15.3.1.33.7 | NA | ||
table · not-accessible · current DHCP Snooping VLAN Table. | ||||
| RdhcpSnoopingCurCfgVlanTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.33.7.1 | NA | ||
| CdhcpSnoopingCurCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.3.1.33.7.1.1 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current VLAN ID of this DHCP Snooping VLAN configration. | ||||
| CdhcpSnoopingCurCfgVlanOnState | 1.3.6.1.4.1.20301.2.7.15.3.1.33.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current on/off state of DHCP Snooping on this VLAN.
| ||||
| TdhcpSnoopingNewCfgVlanTable | 1.3.6.1.4.1.20301.2.7.15.3.1.33.8 | NA | ||
table · not-accessible · current DHCP Snooping VLAN Table. | ||||
| RdhcpSnoopingNewCfgVlanTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.1.33.8.1 | NA | ||
| CdhcpSnoopingNewCfgVlanId | 1.3.6.1.4.1.20301.2.7.15.3.1.33.8.1.1 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current VLAN ID of this DHCP Snooping VLAN configration. | ||||
| CdhcpSnoopingNewCfgVlanOnState | 1.3.6.1.4.1.20301.2.7.15.3.1.33.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable DHCP Snooping on this VLAN.
| ||||
| Nlayer3Stats | 1.3.6.1.4.1.20301.2.7.15.3.2 | |||
| NarpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.2 | |||
| SarpStatEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.2.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of ARP entries. | ||||
| SarpStatHighWater | 1.3.6.1.4.1.20301.2.7.15.3.2.2.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The highest number of ARP entries. | ||||
| SarpStatMaxEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.2.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The maximum number of ARP entries. | ||||
| NrouteStats | 1.3.6.1.4.1.20301.2.7.15.3.2.3 | |||
| SrouteStatEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of IP routes. | ||||
| SrouteStatHighWater | 1.3.6.1.4.1.20301.2.7.15.3.2.3.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The highest number of IP routes. | ||||
| SrouteStatStaticEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Current static routes. | ||||
| SrouteStatRipEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Current RIP routes. | ||||
| SrouteStatOspfEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Current OSPF routes. | ||||
| SrouteStatBgpEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.6 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Current BGP routes. | ||||
| SrouteStatMaxEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.7 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The maximum number of IP routes. | ||||
| SrouteStatEcmpMaxEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.8 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Maximum number of ECMP routes. | ||||
| SrouteStatEcmpMaxStaticEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.9 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Maximum number of static ECMP routes. | ||||
| SrouteStatEcmpPathsEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.3.11 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Number of routes with ECMP paths. | ||||
| NdnsStats | 1.3.6.1.4.1.20301.2.7.15.3.2.4 | |||
| SdnsStatInGoodDnsRequests | 1.3.6.1.4.1.20301.2.7.15.3.2.4.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of DNS request packets which are received. | ||||
| SdnsStatInBadDnsRequests | 1.3.6.1.4.1.20301.2.7.15.3.2.4.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of DNS request packets received that were dropped. | ||||
| SdnsStatOutDnsRequests | 1.3.6.1.4.1.20301.2.7.15.3.2.4.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of DNS request packets that have been transmitted. | ||||
| NvrrpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.5 | |||
| SvrrpStatInAdvers | 1.3.6.1.4.1.20301.2.7.15.3.2.5.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of good VRRP advertisements which are received. | ||||
| SvrrpStatOutAdvers | 1.3.6.1.4.1.20301.2.7.15.3.2.5.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of good VRRP advertisements which are transmitted. | ||||
| SvrrpStatBadAdvers | 1.3.6.1.4.1.20301.2.7.15.3.2.5.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP advertisements which are received. | ||||
| SvrrpStatBadVersion | 1.3.6.1.4.1.20301.2.7.15.3.2.5.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP version adv which are received. | ||||
| SvrrpStatBadAddress | 1.3.6.1.4.1.20301.2.7.15.3.2.5.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP addres adv which are received. | ||||
| SvrrpStatBadPassword | 1.3.6.1.4.1.20301.2.7.15.3.2.5.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP advertisements which are received. | ||||
| SvrrpStatBadVrid | 1.3.6.1.4.1.20301.2.7.15.3.2.5.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP version ID adv which are received. | ||||
| SvrrpStatBadData | 1.3.6.1.4.1.20301.2.7.15.3.2.5.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP advertisements which are received. | ||||
| SvrrpStatBadInterval | 1.3.6.1.4.1.20301.2.7.15.3.2.5.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP intervals which are received. | ||||
| SvrrpStatOutGratuitousARPs | 1.3.6.1.4.1.20301.2.7.15.3.2.5.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of gratuitous ARP packets which are transmitted. | ||||
| NospfStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6 | |||
| NospfGeneralStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1 | |||
| NospfCumRxTxStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1 | |||
| SospfCumRxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all OSPF packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all OSPF packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Hello packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Hello packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Database Description packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Database Description packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Request packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Update packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces. | ||||
| NospfCumNbrChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2 | |||
| SospfCumNbrhello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces. | ||||
| SospfCumNbrStart | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces. | ||||
| SospfCumNbrAdjointOk | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces. | ||||
| SospfCumNbrNegotiationDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces. | ||||
| SospfCumNbrExchangeDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces. | ||||
| SospfCumNbrBadRequests | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas. | ||||
| SospfCumNbrBadSequence | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces. | ||||
| SospfCumNbrLoadingDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces. | ||||
| SospfCumNbrN1way | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas. | ||||
| SospfCumNbrRstAd | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces. | ||||
| SospfCumNbrDown | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces. | ||||
| SospfCumNbrN2way | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas. | ||||
| NospfCumIntfChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3 | |||
| SospfCumIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Hello packets sent on all interfaces and areas | ||||
| SospfCumIntfDown | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of interfaces down in all OSPF areas. | ||||
| SospfCumIntfLoop | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces. | ||||
| SospfCumIntfUnloop | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of interfaces, connected to the attatched network in all OSPF areas. | ||||
| SospfCumIntfWaitTimer | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces. | ||||
| SospfCumIntfBackup | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces. | ||||
| SospfCumIntfNbrChange | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas. | ||||
| NospfTimersKickOffStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4 | |||
| SospfTmrsKckOffHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces. | ||||
| SospfTmrsKckOffRetransmit | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces. | ||||
| SospfTmrsKckOffLsaLock | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces. | ||||
| SospfTmrsKckOffLsaAck | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces. | ||||
| SospfTmrsKckOffDbage | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times the Dbage has been fired. | ||||
| SospfTmrsKckOffSummary | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times the Summary timer has been fired. | ||||
| SospfTmrsKckOffAseExport | 1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times the ASE Export timer has been fired. | ||||
| NospfArea | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2 | |||
| TospfAreaRxTxStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1 | NA | ||
table · not-accessible · current The table of OSPF Area Rx/Tx Statistics. | ||||
| RospfAreaRxTxStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1 | NA | ||
| CospfAreaRxTxIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the ospf Area for which these statistics apply. | ||||
| CospfAreaRxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of OSPF packets received in this OSPF area. | ||||
| CospfAreaTxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of OSPF packets transmitted in this OSPF area. | ||||
| CospfAreaRxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received in this OSPF area. | ||||
| CospfAreaTxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets transmitted in this OSPF area. | ||||
| CospfAreaRxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this OSPF area. | ||||
| CospfAreaTxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this OSPF area. | ||||
| CospfAreaRxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets received for this OSPF area. | ||||
| CospfAreaTxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets transmitted for this OSPF area. | ||||
| CospfAreaRxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets received for this OSPF area. | ||||
| CospfAreaTxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets transmitted for this OSPF area. | ||||
| CospfAreaRxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets received for this OSPF area. | ||||
| CospfAreaTxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets transmitted for this OSPF area. | ||||
| TospfAreaNbrChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2 | NA | ||
table · not-accessible · current The table of OSPF Area Neighbour Statistics. | ||||
| RospfAreaNbrChangeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1 | NA | ||
row · not-accessible · current Area Neighbour Change Statistics about a OSPF area.
| ||||
| CospfAreaNbrIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the ospf Area for which these statistics apply. | ||||
| CospfAreaNbrhello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours in this OSPF area. | ||||
| CospfAreaNbrStart | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area. | ||||
| CospfAreaNbrAdjointOk | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area. | ||||
| CospfAreaNbrNegotiationDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area. | ||||
| CospfAreaNbrExchangeDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area. | ||||
| CospfAreaNbrBadRequests | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area. | ||||
| CospfAreaNbrBadSequence | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area. | ||||
| CospfAreaNbrLoadingDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of link state updates received for all out-of-date portions of the database in this OSPF area. | ||||
| CospfAreaNbrN1way | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area. | ||||
| CospfAreaNbrRstAd | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the Neighbour adjacency has been reset across this OPSF area. | ||||
| CospfAreaNbrDown | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area. | ||||
| CospfAreaNbrN2way | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area. | ||||
| TospfAreaChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3 | NA | ||
table · not-accessible · current The table of OSPF Area Change Statistics. | ||||
| RospfAreaChangeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1 | NA | ||
| CospfAreaIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Area for which these statistics apply. | ||||
| CospfAreaIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets sent on this OSPF area. | ||||
| CospfAreaIntfDown | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of interfaces down in this OSPF area. | ||||
| CospfAreaIntfLoop | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of interfaces no longer connected to the attatched network in this OSPF area. | ||||
| CospfAreaIntfUnloop | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of interfaces connected to the attatched network in this OSPF area.. | ||||
| CospfAreaIntfWaitTimer | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area. | ||||
| CospfAreaIntfBackup | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Backup Designated Routers on the attatched network for this OSPF area. | ||||
| CospfAreaIntfNbrChange | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area. | ||||
| TospfAreaErrorStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4 | NA | ||
table · not-accessible · current The table of OSPF Area Error Statistics. | ||||
| RospfAreaErrorStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1 | NA | ||
| CospfAreaErrIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Area for which these statistics apply. | ||||
| CospfAreaErrAuthFailure | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong password in this area. | ||||
| CospfAreaErrNetmaskMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong netmask in this area. | ||||
| CospfAreaErrHelloMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different hello interval in this area. | ||||
| CospfAreaErrDeadMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different dead interval in this area. | ||||
| CospfAreaErrOptionsMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different options in this area. | ||||
| CospfAreaErrUnknownNbr | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received from an unknown neighbor in this area. | ||||
| CospfAreaErrAreaMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong area. | ||||
| CospfAreaErrInvalidSelfOrigLsa | 1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with invalid self originated LSAs. | ||||
| NospfInterface | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3 | |||
| TospfIntfRxTxStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1 | NA | ||
table · not-accessible · current The table of OSPF Interface Rx/Tx packet Statistics. | ||||
| RospfIntfRxTxStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1 | NA | ||
| CospfIntfRxTxIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF interface for which these statistics apply. | ||||
| CospfIntfRxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of OSPF packets received for this OSPF interface. | ||||
| CospfIntfTxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of OSPF packets transmitted for this OSPF interface. | ||||
| CospfIntfRxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received for this OSPF interface. | ||||
| CospfIntfTxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets transmitted for this OSPF interface. | ||||
| CospfIntfRxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets received for this OSPF interface. | ||||
| CospfIntfTxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this OSPF interface. | ||||
| CospfIntfRxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets received for this OSPF interface. | ||||
| CospfIntfTxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets transmitted for this OSPF interface. | ||||
| CospfIntfRxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets received for this OSPF interface. | ||||
| CospfIntfTxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets transmitted for this OSPF interface. | ||||
| CospfIntfRxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets received for this OSPF interface. | ||||
| CospfIntfTxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets transmitted for this OSPF interface. | ||||
| TospfIntfNbrChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2 | NA | ||
table · not-accessible · current The table of OSPF Interface Neighbour change Statistics. | ||||
| RospfIntfNbrChangeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1 | NA | ||
| CospfIntfNbrIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Interface for which these statistics apply. | ||||
| CospfIntfNbrhello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours in this OSPF interface. | ||||
| CospfIntfNbrStart | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface. | ||||
| CospfIntfNbrAdjointOk | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface. | ||||
| CospfIntfNbrNegotiationDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface. | ||||
| CospfIntfNbrExchangeDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface. | ||||
| CospfIntfNbrBadRequests | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface. | ||||
| CospfIntfNbrBadSequence | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface. | ||||
| CospfIntfNbrLoadingDone | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of link state updates received for all out-of-date portions of the database for this OSPF interface. | ||||
| CospfIntfNbrN1way | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface. | ||||
| CospfIntfNbrRstAd | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The sum total number of times the Neighbour adjacency has been reset on this interface. | ||||
| CospfIntfNbrDown | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface. | ||||
| CospfIntfNbrN2way | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface. | ||||
| TospfIntfChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3 | NA | ||
table · not-accessible · current The table of OSPF Interface change Statistics. | ||||
| RospfIntfChangeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1 | NA | ||
| CospfIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Interface for which these statistics apply. | ||||
| CospfIntfHello | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets sent by this interface. | ||||
| CospfIntfDown | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the interface was down. | ||||
| CospfIntfLoop | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the interface was no longer connected to the attatched network. | ||||
| CospfIntfUnloop | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the interface, connected back to the attatched network. | ||||
| CospfIntfWaitTimer | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface. | ||||
| CospfIntfBackup | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Backup Designated Routers on the attatched network for this OSPF interface. | ||||
| CospfIntfNbrChange | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface. | ||||
| TospfIntfErrorStats | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4 | NA | ||
table · not-accessible · current The table of OSPF Interface Error Statistics. | ||||
| RospfIntfErrorStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1 | NA | ||
| CospfIntfErrIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Intf for which these statistics apply. | ||||
| CospfIntfErrAuthFailure | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong password in this area. | ||||
| CospfIntfErrNetmaskMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong netmask in this area. | ||||
| CospfIntfErrHelloMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different hello interval in this area. | ||||
| CospfIntfErrDeadMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different dead interval in this area. | ||||
| CospfIntfErrOptionsMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different options in this area. | ||||
| CospfIntfErrUnknownNbr | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received from an unknown neighbor in this area. | ||||
| CospfIntfErrAreaMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong area. | ||||
| CospfIntfErrInvalidSelfOrigLSA | 1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with invalid self-orig LSAs. | ||||
| NclearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7 | |||
| SipClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(2) results in clearing the IP statistics.
| ||||
| SvrrpClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(2) results in clearing the VRRP statistics.
| ||||
| SospfClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the OSPF statistics.
| ||||
| StcpClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the TCP statistics.
| ||||
| SudpClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the UDP statistics.
| ||||
| SdnsClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the DNS statistics.
| ||||
| SarpClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the ARP statistics.
| ||||
| SicmpClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the ICMP statistics.
| ||||
| SrouteClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the Route statistics.
| ||||
| Sipv6ClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the IPv6 statistics.
| ||||
| Sipv6ClearIcmpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the ICMP6 statistics.
| ||||
| Sipv6ClearUdpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the UDP6 statistics.
| ||||
| Sospf3ClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the ospf3 statistics.
| ||||
| SripClearStats | 1.3.6.1.4.1.20301.2.7.15.3.2.7.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the RIP statistics.
| ||||
| NigmpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.9 | |||
| TigmpSnoopStats | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1 | NA | ||
table · not-accessible · current Statistics for IGMP Snooping. | ||||
| RigmpSnoopStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1 | NA | ||
| CigmpSnoopVlanIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the VLAN for which these statistics apply. | ||||
| CrxIgmpValidPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of valid IGMP packets received on this VLAN. | ||||
| CrxIgmpInvalidPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of invalid IGMP packets received on this VLAN. | ||||
| CrxIgmpGenQueries | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP General Query packets received on this VLAN. | ||||
| CrxIgmpGrpSpecificQueries | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Group Specific Query packets received on this VLAN. | ||||
| CrxIgmpLeaves | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Leave packets received on this VLAN. | ||||
| CrxIgmpReports | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Report packets received on this VLAN. | ||||
| CtxIgmpGrpSpecificQueries | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Group Specific Query packets transmitted on this VLAN. | ||||
| CtxIgmpReports | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Report packets transmitted on this VLAN. | ||||
| CtxIgmpLeaves | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Leave packets transmitted on this VLAN. | ||||
| CrxIgmpGroupSourceSpecificQueries | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Group Source Specific (GSSQ) Queries received on this VLAN. | ||||
| CrxIgmpV3CurrentStateRecords | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Current State Records (CSRs) received on this VLAN. | ||||
| CrxIgmpV3SourceListChangeRecords | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Source List Change Records (SLCRs) received on this VLAN. | ||||
| CrxIgmpV3FilterChangeRecords | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Filter Mode Change Records (FMCRs) received on this VLAN. | ||||
| CtxIgmpGenQueries | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP General Query packets send on this VLAN. | ||||
| CrxIgmpDiscardPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP packets discarded on this VLAN. | ||||
| CrxIgmpPimHellos | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Pim Hello packets received on this VLAN. | ||||
| CigmpClearVlanStats | 1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this to clear(1) results in clearing the statistics for this snooping VLAN.
| ||||
| SigmpClearAllStats | 1.3.6.1.4.1.20301.2.7.15.3.2.9.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the IGMP statistics.
| ||||
| SigmpStatsTotalIgmpGroups | 1.3.6.1.4.1.20301.2.7.15.3.2.9.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP groups. | ||||
| SigmpStatsTotalIpmcGroups | 1.3.6.1.4.1.20301.2.7.15.3.2.9.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IPMC groups. | ||||
| Nipv6Stats | 1.3.6.1.4.1.20301.2.7.15.3.2.10 | |||
| Sipv6InReceives | 1.3.6.1.4.1.20301.2.7.15.3.2.10.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of input datagrams received from interfaces, including those received in error. | ||||
| Sipv6InMcasts | 1.3.6.1.4.1.20301.2.7.15.3.2.10.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of multicast packets received from interfaces, including those received in error. | ||||
| Sipv6InDelivers | 1.3.6.1.4.1.20301.2.7.15.3.2.10.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams given to upper layer - ICMP/UDP | ||||
| Sipv6InDiscards | 1.3.6.1.4.1.20301.2.7.15.3.2.10.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams discarded despite no errors | ||||
| Sipv6InHdrerrs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams with error in IPv6/Option headers | ||||
| Sipv6InAddrerrs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams with error in destination address | ||||
| Sipv6InUnkprots | 1.3.6.1.4.1.20301.2.7.15.3.2.10.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams with unknown/unsupported protocol | ||||
| Sipv6InTruncs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams with insufficient data | ||||
| Sipv6OutMcasts | 1.3.6.1.4.1.20301.2.7.15.3.2.10.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total sent multicast pkts | ||||
| Sipv6ForwDgrams | 1.3.6.1.4.1.20301.2.7.15.3.2.10.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams attempted to be forwarded | ||||
| Sipv6TooBigerrs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams which could not be forwarded as their size exceeds (Path) MTU | ||||
| Sipv6OutReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams attempted to be sent | ||||
| Sipv6OutDiscards | 1.3.6.1.4.1.20301.2.7.15.3.2.10.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total outgoing Datagrams discarded despite no errors | ||||
| Sipv6OutNorts | 1.3.6.1.4.1.20301.2.7.15.3.2.10.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams discarded due to no routes | ||||
| Sipv6Reasmreqs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams needing reassembly | ||||
| Sipv6Reasmoks | 1.3.6.1.4.1.20301.2.7.15.3.2.10.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams successfully reassembled | ||||
| Sipv6Reasmfails | 1.3.6.1.4.1.20301.2.7.15.3.2.10.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams for witch reassembly failured | ||||
| Sipv6Fragoks | 1.3.6.1.4.1.20301.2.7.15.3.2.10.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams successfully fragmented | ||||
| Sipv6Fragfails | 1.3.6.1.4.1.20301.2.7.15.3.2.10.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total datagrams for witch fragmentation failured | ||||
| Sipv6Fragcreates | 1.3.6.1.4.1.20301.2.7.15.3.2.10.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of fragments created | ||||
| Sipv6InNsols | 1.3.6.1.4.1.20301.2.7.15.3.2.10.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of received Neighbor Solicitations | ||||
| Sipv6InNadvs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of received Neighbor Advertisements | ||||
| Sipv6InRoutsols | 1.3.6.1.4.1.20301.2.7.15.3.2.10.25 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of received Router Solicitations | ||||
| Sipv6InRoutadvs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.26 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of received Router Advertisements | ||||
| Sipv6InRoutRedirs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.27 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of received Router Redirect messages | ||||
| Sipv6OutNsols | 1.3.6.1.4.1.20301.2.7.15.3.2.10.28 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of sent Neighbor Solicitations | ||||
| Sipv6OutNadvs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.29 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of sent Neighbor Advertisements | ||||
| Sipv6OutRoutadvs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.30 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of sent Router Advertisements | ||||
| Sipv6OutRedirs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.31 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of sent Redirects | ||||
| Sipv6OutRoutSols | 1.3.6.1.4.1.20301.2.7.15.3.2.10.32 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of sent Router Solicitations | ||||
| Sipv6icmpInMsgs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.39 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of ICMP messages received. | ||||
| Sipv6icmpInErrs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.40 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of ICMP messages attempted to send. | ||||
| Sipv6icmpInBadcode | 1.3.6.1.4.1.20301.2.7.15.3.2.10.41 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of ICMP messages in bad code. | ||||
| Sipv6icmpInToobig | 1.3.6.1.4.1.20301.2.7.15.3.2.10.42 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP too big messages received. | ||||
| Sipv6icmpInDstUnreach | 1.3.6.1.4.1.20301.2.7.15.3.2.10.43 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Destination Unreachable messages received. | ||||
| Sipv6icmpInTmexceeded | 1.3.6.1.4.1.20301.2.7.15.3.2.10.44 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Time Exceeded messages received. | ||||
| Sipv6icmpInParamprob | 1.3.6.1.4.1.20301.2.7.15.3.2.10.45 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Parameter Problem messages received. | ||||
| Sipv6icmpInEchoReq | 1.3.6.1.4.1.20301.2.7.15.3.2.10.46 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Echo request messages received. | ||||
| Sipv6icmpInEchoResp | 1.3.6.1.4.1.20301.2.7.15.3.2.10.47 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Echo Reply messages received. | ||||
| Sipv6icmpOutMsgs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.48 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of ICMP messages which this entity attempted to send. | ||||
| Sipv6icmpOutErrs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.49 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. | ||||
| Sipv6icmpOutDstUnreach | 1.3.6.1.4.1.20301.2.7.15.3.2.10.50 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Destination Unreachable messages sent. | ||||
| Sipv6icmpOutToobig | 1.3.6.1.4.1.20301.2.7.15.3.2.10.51 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP too big messages sent. | ||||
| Sipv6icmpOutTmexceeded | 1.3.6.1.4.1.20301.2.7.15.3.2.10.52 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Time Exceeded messages sent. | ||||
| Sipv6icmpOutParamprob | 1.3.6.1.4.1.20301.2.7.15.3.2.10.53 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Parameter Problem messages sent. | ||||
| Sipv6icmpOutEchoReq | 1.3.6.1.4.1.20301.2.7.15.3.2.10.54 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Echo request messages sent. | ||||
| Sipv6icmpOutEchoResp | 1.3.6.1.4.1.20301.2.7.15.3.2.10.55 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Echo Reply messages sent. | ||||
| Sipv6icmpInRouterSol | 1.3.6.1.4.1.20301.2.7.15.3.2.10.56 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP router solicitations received. | ||||
| Sipv6icmpInRouterAdv | 1.3.6.1.4.1.20301.2.7.15.3.2.10.57 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP router advertisements received. | ||||
| Sipv6icmpInNeighSol | 1.3.6.1.4.1.20301.2.7.15.3.2.10.58 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP neighbor solicitations received. | ||||
| Sipv6icmpInNeighAdv | 1.3.6.1.4.1.20301.2.7.15.3.2.10.59 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP neighbor advertisements received. | ||||
| Sipv6icmpInRedir | 1.3.6.1.4.1.20301.2.7.15.3.2.10.60 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Redirect messages received. | ||||
| Sipv6icmpOutRouterSol | 1.3.6.1.4.1.20301.2.7.15.3.2.10.61 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP router solicitations sent. | ||||
| Sipv6icmpOutRouterAdv | 1.3.6.1.4.1.20301.2.7.15.3.2.10.62 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP router advertisements sent. | ||||
| Sipv6icmpOutNeighSol | 1.3.6.1.4.1.20301.2.7.15.3.2.10.63 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP neighbor solicitations sent. | ||||
| Sipv6icmpOutNeighAdv | 1.3.6.1.4.1.20301.2.7.15.3.2.10.64 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP neighbor advertisements sent. | ||||
| Sipv6icmpOutRedir | 1.3.6.1.4.1.20301.2.7.15.3.2.10.65 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ICMP Redirect messages sent. | ||||
| Sipv6udpInDgrams | 1.3.6.1.4.1.20301.2.7.15.3.2.10.66 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of UDP received datagrams. | ||||
| Sipv6udpInErrs | 1.3.6.1.4.1.20301.2.7.15.3.2.10.67 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of UDP error encountered during processing of packet. | ||||
| Sipv6udpOutDgrams | 1.3.6.1.4.1.20301.2.7.15.3.2.10.68 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of UDP datagrams passed to IP6 layer. | ||||
| Sipv6udpNumPorts | 1.3.6.1.4.1.20301.2.7.15.3.2.10.69 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of UDP ports that are currently open. | ||||
| Sipv6icmpInAdminProhib | 1.3.6.1.4.1.20301.2.7.15.3.2.10.70 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of received Destination Unreachable ICMP packets. | ||||
| Sipv6icmpOutAdminProhib | 1.3.6.1.4.1.20301.2.7.15.3.2.10.71 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of sent Destination Unreachable ICMP packets. | ||||
| Nrip2Stats | 1.3.6.1.4.1.20301.2.7.15.3.2.13 | |||
| SripStatInPackets | 1.3.6.1.4.1.20301.2.7.15.3.2.13.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP packets received. | ||||
| SripStatOutPackets | 1.3.6.1.4.1.20301.2.7.15.3.2.13.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP packets transmitted. | ||||
| SripStatInRequestPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.13.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP requests received. | ||||
| SripStatInResponsePkts | 1.3.6.1.4.1.20301.2.7.15.3.2.13.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP response received. | ||||
| SripStatOutRequestPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.13.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP requests transmitted. | ||||
| SripStatOutResponsePkts | 1.3.6.1.4.1.20301.2.7.15.3.2.13.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP responses transmitted. | ||||
| SripStatRouteTimeout | 1.3.6.1.4.1.20301.2.7.15.3.2.13.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP route timeouts. | ||||
| SripStatInBadSizePkts | 1.3.6.1.4.1.20301.2.7.15.3.2.13.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of bad size RIP packets received. | ||||
| SripStatInBadVersion | 1.3.6.1.4.1.20301.2.7.15.3.2.13.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP bad versions received. | ||||
| SripStatInBadZeros | 1.3.6.1.4.1.20301.2.7.15.3.2.13.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP bad zeros received. | ||||
| SripStatInBadSourcePort | 1.3.6.1.4.1.20301.2.7.15.3.2.13.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP bad source port received. | ||||
| SripStatInBadSourceIP | 1.3.6.1.4.1.20301.2.7.15.3.2.13.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP bad source IP received. | ||||
| SripStatInSelfRcvPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.13.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP packets from self received. | ||||
| NgeaStats | 1.3.6.1.4.1.20301.2.7.15.3.2.14 | |||
| TgeaStatBucketTable | 1.3.6.1.4.1.20301.2.7.15.3.2.14.1 | NA | ||
table · not-accessible · current The table of GEA L3 bucket for IP address. | ||||
| RgeaStatBucketTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.14.1.1 | NA | ||
| CgeaStatDestIp | 1.3.6.1.4.1.20301.2.7.15.3.2.14.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of the GEA entry. | ||||
| CgeaStatEntryNumber | 1.3.6.1.4.1.20301.2.7.15.3.2.14.1.1.2 | INTEGER (1..8) | RO | |
column · INTEGER (1..8) · read-only · current The entry number. | ||||
| CgeaStatEntryIp | 1.3.6.1.4.1.20301.2.7.15.3.2.14.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP of the entry. | ||||
| SmaxL3TableSize | 1.3.6.1.4.1.20301.2.7.15.3.2.14.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The GEA Max L3 table size | ||||
| SnoL3EntriesUsed | 1.3.6.1.4.1.20301.2.7.15.3.2.14.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of L3 entries used. | ||||
| SmaxLpmTableSize | 1.3.6.1.4.1.20301.2.7.15.3.2.14.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The GEA Max LPM table size. | ||||
| SnoLpmEntriesUsed | 1.3.6.1.4.1.20301.2.7.15.3.2.14.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of LPM entries used. | ||||
| SmaxEcmpTableSize | 1.3.6.1.4.1.20301.2.7.15.3.2.14.8 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Max ECMP table size | ||||
| SnoEcmpPathsUsed | 1.3.6.1.4.1.20301.2.7.15.3.2.14.9 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Max ECMP table size | ||||
| SmaxRoutesAllowedEcmpPaths | 1.3.6.1.4.1.20301.2.7.15.3.2.14.10 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Max routes allowed to have ECMP paths | ||||
| SmaxEcmpPathsAllowedForOneRoute | 1.3.6.1.4.1.20301.2.7.15.3.2.14.11 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Max ECMP paths allowed for one route | ||||
| SnoRoutesEcmp | 1.3.6.1.4.1.20301.2.7.15.3.2.14.12 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Number of routes has ECMP | ||||
| NipStats | 1.3.6.1.4.1.20301.2.7.15.3.2.16 | |||
| SipStatsInReceives | 1.3.6.1.4.1.20301.2.7.15.3.2.16.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InReceive | ||||
| SipStatsInHdrErrors | 1.3.6.1.4.1.20301.2.7.15.3.2.16.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InHdrError | ||||
| SipStatsInAddrErrors | 1.3.6.1.4.1.20301.2.7.15.3.2.16.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InAddrErrors | ||||
| SipStatsInUnknownProtos | 1.3.6.1.4.1.20301.2.7.15.3.2.16.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InUnknownProtos | ||||
| SipStatsInDiscards | 1.3.6.1.4.1.20301.2.7.15.3.2.16.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InDiscards | ||||
| SipStatsInDelivers | 1.3.6.1.4.1.20301.2.7.15.3.2.16.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InDelivers | ||||
| SipStatsOutRequests | 1.3.6.1.4.1.20301.2.7.15.3.2.16.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip OutRequests | ||||
| SipStatsOutDiscards | 1.3.6.1.4.1.20301.2.7.15.3.2.16.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip OutDiscards | ||||
| SipStatsDefaultTTL | 1.3.6.1.4.1.20301.2.7.15.3.2.16.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip DefaultTTL | ||||
| NicmpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.17 | |||
| SicmpStatsInMsgs | 1.3.6.1.4.1.20301.2.7.15.3.2.17.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InMsgs | ||||
| SicmpStatsInErrors | 1.3.6.1.4.1.20301.2.7.15.3.2.17.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InErrors | ||||
| SicmpStatsInDestUnreachs | 1.3.6.1.4.1.20301.2.7.15.3.2.17.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InDestUnreachs | ||||
| SicmpStatsInTimeExcds | 1.3.6.1.4.1.20301.2.7.15.3.2.17.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InTimeExcds | ||||
| SicmpStatsInParmProbs | 1.3.6.1.4.1.20301.2.7.15.3.2.17.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InParmProbs | ||||
| SicmpStatsInSrcQuenchs | 1.3.6.1.4.1.20301.2.7.15.3.2.17.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InSrcQuenchs | ||||
| SicmpStatsInRedirects | 1.3.6.1.4.1.20301.2.7.15.3.2.17.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InRedirects | ||||
| SicmpStatsInEchos | 1.3.6.1.4.1.20301.2.7.15.3.2.17.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InEchos | ||||
| SicmpStatsInEchoReps | 1.3.6.1.4.1.20301.2.7.15.3.2.17.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InEchoReps | ||||
| SicmpStatsInTimestamps | 1.3.6.1.4.1.20301.2.7.15.3.2.17.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InTimestamps | ||||
| SicmpStatsInTimestampReps | 1.3.6.1.4.1.20301.2.7.15.3.2.17.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InTimestampReps | ||||
| SicmpStatsInAddrMasks | 1.3.6.1.4.1.20301.2.7.15.3.2.17.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InAddrMasks | ||||
| SicmpStatsInAddrMaskReps | 1.3.6.1.4.1.20301.2.7.15.3.2.17.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp InAddrMaskReps | ||||
| SicmpStatsOutMsgs | 1.3.6.1.4.1.20301.2.7.15.3.2.17.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutMsgs | ||||
| SicmpStatsOutErrors | 1.3.6.1.4.1.20301.2.7.15.3.2.17.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutErrors | ||||
| SicmpStatsOutDestUnreachs | 1.3.6.1.4.1.20301.2.7.15.3.2.17.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutDestUnreachs | ||||
| SicmpStatsOutTimeExcds | 1.3.6.1.4.1.20301.2.7.15.3.2.17.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutTimeExcds | ||||
| SicmpStatsOutParmProbs | 1.3.6.1.4.1.20301.2.7.15.3.2.17.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutParmProbs | ||||
| SicmpStatsOutSrcQuenchs | 1.3.6.1.4.1.20301.2.7.15.3.2.17.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutSrcQuenchs | ||||
| SicmpStatsOutRedirects | 1.3.6.1.4.1.20301.2.7.15.3.2.17.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutRedirects | ||||
| SicmpStatsOutEchos | 1.3.6.1.4.1.20301.2.7.15.3.2.17.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutEchos | ||||
| SicmpStatsOutEchoReps | 1.3.6.1.4.1.20301.2.7.15.3.2.17.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutEchoReps | ||||
| SicmpStatsOutTimestamps | 1.3.6.1.4.1.20301.2.7.15.3.2.17.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutTimestamps | ||||
| SicmpStatsOutTimestampReps | 1.3.6.1.4.1.20301.2.7.15.3.2.17.24 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutTimestampReps | ||||
| SicmpStatsOutAddrMasks | 1.3.6.1.4.1.20301.2.7.15.3.2.17.25 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutAddrMasks | ||||
| SicmpStatsOutAddrMaskReps | 1.3.6.1.4.1.20301.2.7.15.3.2.17.26 | Counter32 | RO | |
scalar · Counter32 · read-only · current icmp OutAddrMaskReps | ||||
| NtcpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.18 | |||
| StcpStatsRtoAlgorithm | 1.3.6.1.4.1.20301.2.7.15.3.2.18.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp RtoAlgorithm | ||||
| StcpStatsRtoMin | 1.3.6.1.4.1.20301.2.7.15.3.2.18.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp RtoMin | ||||
| StcpStatsRtoMax | 1.3.6.1.4.1.20301.2.7.15.3.2.18.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp RtoMax | ||||
| StcpStatsMaxConn | 1.3.6.1.4.1.20301.2.7.15.3.2.18.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp MaxConn | ||||
| StcpStatsActiveOpens | 1.3.6.1.4.1.20301.2.7.15.3.2.18.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp ActiveOpens | ||||
| StcpStatsPassiveOpens | 1.3.6.1.4.1.20301.2.7.15.3.2.18.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp PassiveOpens | ||||
| StcpStatsAttemptFails | 1.3.6.1.4.1.20301.2.7.15.3.2.18.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp AttemptFails | ||||
| StcpStatsEstabResets | 1.3.6.1.4.1.20301.2.7.15.3.2.18.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp EstabResets | ||||
| StcpStatsInSegs | 1.3.6.1.4.1.20301.2.7.15.3.2.18.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp InSegs | ||||
| StcpStatsOutSegs | 1.3.6.1.4.1.20301.2.7.15.3.2.18.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp OutSegs | ||||
| StcpStatsRetransSegs | 1.3.6.1.4.1.20301.2.7.15.3.2.18.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp RetransSegs | ||||
| StcpStatsInErrs | 1.3.6.1.4.1.20301.2.7.15.3.2.18.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp InErrs | ||||
| StcpStatsCurrEstab | 1.3.6.1.4.1.20301.2.7.15.3.2.18.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp CurrEstab | ||||
| StcpStatsCurrConn | 1.3.6.1.4.1.20301.2.7.15.3.2.18.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp CurrConn | ||||
| StcpStatsOutRsts | 1.3.6.1.4.1.20301.2.7.15.3.2.18.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current tcp OutRsts | ||||
| NudpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.19 | |||
| SudpStatsInDatagrams | 1.3.6.1.4.1.20301.2.7.15.3.2.19.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current udp InDatagrams | ||||
| SudpStatsOutDatagrams | 1.3.6.1.4.1.20301.2.7.15.3.2.19.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current udp OutDatagrams | ||||
| SudpStatsInErrors | 1.3.6.1.4.1.20301.2.7.15.3.2.19.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current udp InErrors | ||||
| SudpStatsNoPorts | 1.3.6.1.4.1.20301.2.7.15.3.2.19.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current udp NoPorts | ||||
| NbootpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.20 | |||
| TbootpRelayStatsTable | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1 | NA | ||
table · not-accessible · current The BOOTP relay agent statistics. | ||||
| RbootpRelayStatsTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1 | NA | ||
row · not-accessible · current A row in the BOOTP relay agent statistics table.
| ||||
| CbootpRelayStatsIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number of the port associated with this BOOTP relay statistics entry. | ||||
| CbootpRelayStatsRequestsReceived | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of BOOTP request packets received on the port. | ||||
| CbootpRelayStatsRequestsRelayed | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of request packets relayed to the BOOTP server. If there is more than one server, a request is relayed once for each server; hence, with two servers, this counter will be twice as many as the value of the bootpRelayStatsRequestsReceived object. | ||||
| CbootpRelayStatsRequestsDroppedNoRelay | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current This counter increases each time a request could not be relayed because BOOTP relay is disabled or not allowed on the port. | ||||
| CbootpRelayStatsRequestsDroppedNoServer | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current This counter increases each time a request is dropped because there is no configured server or the server is unreachable because there is no active IP interface that can be used for relaying the request to the server. | ||||
| CbootpRelayStatsRequestsDroppedError | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current This counter increases each time a request is dropped due to various errors encountered while processing the request packet. Such errors include short packet length, invalid 'hops' value, and memory allocation errors. | ||||
| CbootpRelayStatsRepliesReceived | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current This is the total number of BOOTP response packets received on the port associated with this object. | ||||
| CbootpRelayStatsRepliesRelayed | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current This is the total number of response packets that were relayed to the client. | ||||
| CbootpRelayStatsRepliesDroppedError | 1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current This counter increases each time a response packet is dropped
due to various errors encountered while processing the packet.
Errors include unknown relay agent addresses ('giaddr'), and
memory allocation errors. | ||||
| Nospf3Stats | 1.3.6.1.4.1.20301.2.7.15.3.2.22 | |||
| Nospf3GeneralStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1 | |||
| Nospf3CumRxTxDisdStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1 | |||
| Sospf3CumRxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Ospf3 packets received on all of the router's interfaces. | ||||
| Sospf3CumTxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Ospf3 packets transmitted on all of the router's interfaces. | ||||
| Sospf3CumDisdPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Ospf3 packets discaded on all of the router's interfaces. | ||||
| Sospf3CumRxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Hello packets received on all of the router's interfaces. | ||||
| Sospf3CumTxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Hello packets transmitted on all of the router's interfaces. | ||||
| Sospf3CumDisdHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Hello packets discaded on all of the router's interfaces. | ||||
| Sospf3CumRxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Database Description packets received on all of the router's interfaces. | ||||
| Sospf3CumTxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Database Description packets transmitted on all of the router's interfaces. | ||||
| Sospf3CumDisdDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Database Description packets discarded on all of the router's interfaces. | ||||
| Sospf3CumRxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Request packets received on all of the router's interfaces. | ||||
| Sospf3CumTxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Request packets transmitted on all of the router's interfaces. | ||||
| Sospf3CumDisdlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Request packets discarded on all of the router's interfaces. | ||||
| Sospf3CumRxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Acknowledgement packets received on all of the router's interfaces. | ||||
| Sospf3CumTxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Acknowledgement packets transmitted on all of the router's interfaces. | ||||
| Sospf3CumDisdlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Acknowledgement packets discarded on all of the router's interfaces. | ||||
| Sospf3CumRxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Update packets received on all of the router's interfaces. | ||||
| Sospf3CumTxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Update packets transmitted on all of the router's interfaces. | ||||
| Sospf3CumDisdlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Link State Update packets discarded on all of the router's interfaces. | ||||
| Nospf3CumNbrChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2 | |||
| Sospf3CumNbrDown | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing on the interfaces now present on the router have changed into DOWN state. | ||||
| Sospf3CumNbrAttempt | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing the on interfaces now present on the router have changed into ATTEMPT state. | ||||
| Sospf3CumNbrInit | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing the on interfaces now present on the router have changed into INIT state. | ||||
| Sospf3CumNbrN2way | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing the on interfaces now present on the router have changed into 2WAY state. | ||||
| Sospf3CumNbrExStart | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing the on interfaces now present on the router have changed into EXSTART state. | ||||
| Sospf3CumNbrExchange | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing the on interfaces now present on the router have changed into EXCHANGE state. | ||||
| Sospf3CumNbrLoading | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing the on interfaces now present on the router have changed into LOADING state. | ||||
| Sospf3CumNbrFull | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing the on interfaces now present on the router have changed into FULL state. | ||||
| Sospf3CumNbrAllEvents | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times neighbors now existing the on interfaces now present on the router have changed state. | ||||
| Nospf3CumIntfChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3 | |||
| Sospf3CumIntfDown | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times, for all the interfaces on the router, an interface was down. | ||||
| Sospf3CumIntfLoop | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times , for all the interfaces on the router, an interface changed State into the LOOP State. | ||||
| Sospf3CumIntfWaiting | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times , for all the interfaces on the router, an interface changed State into the WAITING State. | ||||
| Sospf3CumIntfPtop | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times , for all the interfaces on the router, an interface changed State into the PTOP State. | ||||
| Sospf3CumIntfDr | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times , for all the interfaces on the router, an interface changed State into the DR State. | ||||
| Sospf3CumIntfBackup | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times , for all the interfaces on the router, an interface changed State into the BACKUP State. | ||||
| Sospf3CumIntfDrOther | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times , for all the interfaces on the router, an interface changed State into the DROTHER State. | ||||
| Sospf3CumIntfAllEvents | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times , for all the interfaces on the router, an interface changed it's state. | ||||
| Nospf3TimersKickOffStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4 | |||
| Sospf3TmrsKckOffHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces. | ||||
| Sospf3TmrsKckOffWait | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the KickOffWait timer has been fired (which triggers the send of a KickOffWait packet) across all OPSF areas and interfaces. | ||||
| Sospf3TmrsKckOffPoll | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the KickOffPoll timer has been fired (which triggers the send of a KickOffPoll packet) across all OPSF areas and interfaces. | ||||
| Sospf3TmrsKckOffNbrProbe | 1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the KickOffNbrProbe timer has been fired (which triggers the send of a KickOffNbrProbe packet) across all OPSF areas and interfaces. | ||||
| Nospf3Area | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2 | |||
| Tospf3AreaRxTxDisdStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1 | NA | ||
table · not-accessible · current The table of Ospf3 Area Rx/Tx Statistics. | ||||
| Rospf3AreaRxTxDisdStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1 | NA | ||
row · not-accessible · current Rx Tx packet Statistics about a Ospf3 area. | ||||
| Cospf3AreaRxTxDisdIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the ospf3 Area for which these statistics apply. | ||||
| Cospf3AreaRxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Ospf3 packets received in this Ospf3 area. | ||||
| Cospf3AreaTxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Ospf3 packets transmitted in this Ospf3 area. | ||||
| Cospf3AreaDisdPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Ospf3 packets discaded in this Ospf3 area. | ||||
| Cospf3AreaRxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received in this Ospf3 area. | ||||
| Cospf3AreaTxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets transmitted in this Ospf3 area. | ||||
| Cospf3AreaDisdHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets discaded in this Ospf3 area. | ||||
| Cospf3AreaRxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this Ospf3 area. | ||||
| Cospf3AreaTxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this Ospf3 area. | ||||
| Cospf3AreaDisdDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets discarded for this Ospf3 area. | ||||
| Cospf3AreaRxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets received for this Ospf3 area. | ||||
| Cospf3AreaTxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets transmitted for this Ospf3 area. | ||||
| Cospf3AreaDisdlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets discarded for this Ospf3 area. | ||||
| Cospf3AreaRxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets received for this Ospf3 area. | ||||
| Cospf3AreaTxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets transmitted for this Ospf3 area. | ||||
| Cospf3AreaDisdlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets discarded for this Ospf3 area. | ||||
| Cospf3AreaRxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets received for this Ospf3 area. | ||||
| Cospf3AreaTxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets transmitted for this Ospf3 area. | ||||
| Cospf3AreaDisdlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets discarded for this Ospf3 area. | ||||
| Tospf3AreaNbrChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2 | NA | ||
table · not-accessible · current The table of Ospf3 Neighbor change Statistics. | ||||
| Rospf3AreaNbrChangeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1 | NA | ||
| Cospf3AreaNbrIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Ospf3 Area for which these statistics apply. | ||||
| Cospf3AreaNbrDown | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed into DOWN state. | ||||
| Cospf3AreaNbrAttempt | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed into ATTEMPT state. | ||||
| Cospf3AreaNbrInit | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed into INIT state. | ||||
| Cospf3AreaNbrN2way | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed into 2WAY state. | ||||
| Cospf3AreaNbrExStart | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed into EXSTART state. | ||||
| Cospf3AreaNbrExchange | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed into EXCHANGE state. | ||||
| Cospf3AreaNbrLoading | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed into LOADING state. | ||||
| Cospf3AreaNbrFull | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed into FULL state. | ||||
| Cospf3AreaNbrAllEvents | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this area have changed state or an error had occured. | ||||
| Tospf3AreaIntfChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3 | NA | ||
table · not-accessible · current The table of Ospf3 Interface change Statistics. | ||||
| Rospf3AreaIntfChangeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1 | NA | ||
| Cospf3AreaIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Ospf3 Interface for which these statistics apply. | ||||
| Cospf3AreaIntfDown | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes into the DOWN State of the interfaces associated with this OSPF area. | ||||
| Cospf3AreaIntfLoop | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes into the LOOP State of the interfaces associated with this OSPF area. | ||||
| Cospf3AreaIntfWaiting | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes into the WAITING State of the interfaces associated with this OSPF area. | ||||
| Cospf3AreaIntfPtop | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes into the PTOP State of the interfaces associated with this OSPF area. | ||||
| Cospf3AreaIntfDr | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes into the DR State of the interfaces associated with this OSPF area. | ||||
| Cospf3AreaIntfBackup | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes into the BACKUP State of the interfaces associated with this OSPF area. | ||||
| Cospf3AreaIntfDrOther | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes into the DROTHER State of the interfaces associated with this OSPF area. | ||||
| Cospf3AreaIntfAllEvents | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of State changes of the interfaces associated with this OSPF area | ||||
| Tospf3AreaErrorStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4 | NA | ||
table · not-accessible · current The table of Ospf3 Interface Error Statistics. | ||||
| Rospf3AreaErrorStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1 | NA | ||
| Cospf3AreaErrIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Ospf3 Area for which these statistics apply. | ||||
| Cospf3AreaErrRxOnPasv | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by all of the interfaces in this area that are received on a passive interface. | ||||
| Cospf3AreaErrRxOspfOff | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by all of the interfaces in this area that are received while OSPF was disabled. | ||||
| Cospf3AreaErrRxOnNotup | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by all of the interfaces in this area that are received while the interface was disabled. | ||||
| Cospf3AreaErrRxVerMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by all of the interfaces in this area that have an OSPF version number not equal to the one of the interface. | ||||
| Cospf3AreaErrRxZeroRTRID | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by all of the interfaces in this area that have a RouterID of 0. | ||||
| Cospf3AreaErrRxSameRTRID | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by all of the interfaces in this area that have the same RouterID as this Router. | ||||
| Cospf3AreaErrRxMismatchInstID | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by all of the interfaces in this area that have an instance number not equal to the one of the interface. | ||||
| Cospf3AreaErrBadAreaID | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by all of the interfaces in this area that have an area number not equal to the one of the area of the interface. | ||||
| Cospf3AreaErrBadDestAddr | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets discarded by all of the interfaces in this area because of a destination address mismatch. | ||||
| Cospf3AreaErrBadChecksum | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets discarded by all of the interfaces in this area because of a bad checksum. | ||||
| Cospf3AreaErrBadNeighbour | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets discarded by all of the interfaces in this area because they could not be associated with any neighbor. | ||||
| Cospf3AreaErrBadPktType | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets discarded by all of the interfaces in this area because the packet type was not recognized. | ||||
| Cospf3AreaErrHelloMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different hello interval by all of the interfaces in this area . | ||||
| Cospf3AreaErrOptionsMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different options by all of the interfaces in this area . | ||||
| Cospf3AreaErrDeadMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different dead interval in this area. | ||||
| Cospf3AreaErrHelloNoNbr | 1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received from an unknown neighbor when all of the interfaces in this area has a Network Type of NBMA or PTOMP. | ||||
| Nospf3Interface | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3 | |||
| Tospf3IntfRxTxDisdStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1 | NA | ||
table · not-accessible · current The table of Ospf3 Intf Rx/Tx Statistics. | ||||
| Rospf3IntfRxTxDisdStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1 | NA | ||
row · not-accessible · current Rx Tx packet Statistics about a Ospf3 area. | ||||
| Cospf3IntfRxTxDisdIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the ospf3 Intf for which these statistics apply. | ||||
| Cospf3IntfRxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Ospf3 packets received on this Ospf3 interface. | ||||
| Cospf3IntfTxPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Ospf3 packets transmitted on this Ospf3 interface. | ||||
| Cospf3IntfDisdPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Ospf3 packets discaded on this Ospf3 interface. | ||||
| Cospf3IntfRxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received on this Ospf3 interface. | ||||
| Cospf3IntfTxHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets transmitted on this Ospf3 interface. | ||||
| Cospf3IntfDisdHello | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets discaded in this Ospf3 interface. | ||||
| Cospf3IntfRxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this Ospf3 interface. | ||||
| Cospf3IntfTxDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this Ospf3 interface. | ||||
| Cospf3IntfDisdDatabase | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets discarded for this Ospf3 interface. | ||||
| Cospf3IntfRxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets received for this Ospf3 interface. | ||||
| Cospf3IntfTxlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets transmitted for this Ospf3 interface. | ||||
| Cospf3IntfDisdlsReqs | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets discarded for this Ospf3 interface. | ||||
| Cospf3IntfRxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets received for this Ospf3 interface. | ||||
| Cospf3IntfTxlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets transmitted for this Ospf3 interface. | ||||
| Cospf3IntfDisdlsAcks | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets discarded for this Ospf3 interface. | ||||
| Cospf3IntfRxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets received for this Ospf3 interface. | ||||
| Cospf3IntfTxlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets transmitted for this Ospf3 interface. | ||||
| Cospf3IntfDisdlsUpdates | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets discarded for this Ospf3 interface. | ||||
| Tospf3IntfNbrChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2 | NA | ||
table · not-accessible · current The table of Ospf3 Interface Neighbour change Statistics. | ||||
| Rospf3IntfNbrChangeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1 | NA | ||
| Cospf3IntfNbrIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Ospf3 Interface for which these statistics apply. | ||||
| Cospf3IntfNbrDown | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed into DOWN state. | ||||
| Cospf3IntfNbrAttempt | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed into ATTEMPT state. | ||||
| Cospf3IntfNbrInit | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed into INIT state. | ||||
| Cospf3IntfNbrN2way | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed into 2WAY state. | ||||
| Cospf3IntfNbrExStart | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed into EXSTART state. | ||||
| Cospf3IntfNbrExchange | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed into EXCHANGE state. | ||||
| Cospf3IntfNbrLoading | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed into LOADING state. | ||||
| Cospf3IntfNbrFull | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed into FULL state. | ||||
| Cospf3IntfNbrAllEvents | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times neighbors now existing on this interface have changed state or an error had occured. | ||||
| Tospf3IntfChangeStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3 | NA | ||
table · not-accessible · current The table of Ospf3 Interface change Statistics. | ||||
| Rospf3IntfChangeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1 | NA | ||
| Cospf3IntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Ospf3 Interface for which these statistics apply. | ||||
| Cospf3IntfDown | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the interface was down. | ||||
| Cospf3IntfLoop | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times this interface changed State into the LOOP State. | ||||
| Cospf3IntfWaiting | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times this interface changed State into the Waiting State. | ||||
| Cospf3IntfPtop | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times this interface changed State into the PTOP State. | ||||
| Cospf3IntfDr | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times this interface changed State into the DR State. | ||||
| Cospf3IntfBackup | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times this interface changed State into the Backup State. | ||||
| Cospf3IntfDrOther | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times this interface changed State into the DrOther State. | ||||
| Cospf3IntfAllEvents | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times this interface changed State. | ||||
| Tospf3IntfErrorStats | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4 | NA | ||
table · not-accessible · current The table of Ospf3 Interface Error Statistics. | ||||
| Rospf3IntfErrorStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1 | NA | ||
| Cospf3IntfErrIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Ospf3 Intf for which these statistics apply. | ||||
| Cospf3IntfErrRxOnPasv | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this interface that are received on a passive interface. | ||||
| Cospf3IntfErrRxOspfOff | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this interface that are received while OSPF was disabled. | ||||
| Cospf3IntfErrRxOnNotup | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this interface that are received while the interface was disabled. | ||||
| Cospf3IntfErrRxVerMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this interface that have an OSPF version number not equal to the one of the interface. | ||||
| Cospf3IntfErrRxZeroRTRID | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this interface that have a RouterID of 0. | ||||
| Cospf3IntfErrRxSameRTRID | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this interface that have the same RouterID as this Router. | ||||
| Cospf3IntfErrRxMismatchInstID | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this interface that have an instance number not equal to the one of the interface. | ||||
| Cospf3IntfErrBadAreaID | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received by this interface that have an area number not equal to the one of the area of the interface. | ||||
| Cospf3IntfErrBadDestAddr | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets discarded by this interface because of a destination address mismatch. | ||||
| Cospf3IntfErrBadChecksum | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets discarded by this interface because of a bad checksum. | ||||
| Cospf3IntfErrBadNeighbour | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets discarded by this interface because they could not be associated with any neighbor. | ||||
| Cospf3IntfErrBadPktType | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets discarded by this interface because the packet type was not recognized. | ||||
| Cospf3IntfErrHelloMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different hello interval by this interface. | ||||
| Cospf3IntfErrOptionsMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different options by this interface. | ||||
| Cospf3IntfErrDeadMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different dead interval by this interface. | ||||
| Cospf3IntfErrMTUMismatch | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different MTU size by this interface. | ||||
| Cospf3IntfErrHelloNoNbr | 1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received from an unknown neighbor when this interface has a Network Type of NBMA or PTOMP. | ||||
| NmldStats | 1.3.6.1.4.1.20301.2.7.15.3.2.23 | |||
| TmldIfStatsTable | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1 | NA | ||
table · not-accessible · current The table listing the interfaces on which MLD is enabled. | ||||
| RmldIfStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1 | NA | ||
row · not-accessible · current An entry representing an interface stats on which MLD is enabled.
| ||||
| CmldIfStatsIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The internetwork-layer interface value of the interface for which MLD msg stats is counted. | ||||
| CrxMldIfStatsGeneralQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Queries received. | ||||
| CrxMldIfStatsMASQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener MAS Queries received. | ||||
| CrxMldIfStatsMASSQQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener MASSQ Queries received. | ||||
| CrxMldIfStatsMLDv1Report | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Reports (v1) received. | ||||
| CrxMldIfStatsMLDv1Done | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Dones (v1/v2) received. | ||||
| CrxMldIfStatsMLDv2Report | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Reports (v2) received. | ||||
| CrxMldIfStatsIncCrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD INC CRs (v2) received. | ||||
| CrxMldIfStatsExcCrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD EXC CRs (v2) received. | ||||
| CrxMldIfStatsToIncFmcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD TO_INC FMCRs (v2) received. | ||||
| CrxMldIfStatsToExcFmcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD TO_EXC FMCRs (v2) received. | ||||
| CrxMldIfStatsAllowSlcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD ALLOW SLCRs (v2) received. | ||||
| CrxMldIfStatsBlockSlcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD BLOCK SLCRs (v2) received. | ||||
| CtxMldIfStatsGeneralQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Queries sent. | ||||
| CtxMldIfStatsMASQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener MAS Queries sent. | ||||
| CtxMldIfStatsMASSQQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener MASSQ Queries sent. | ||||
| CtxMldIfStatsMLDv1Report | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Reports (v1) sent. | ||||
| CtxMldIfStatsMLDv1Done | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Dones (v1/v2) sent. | ||||
| CtxMldIfStatsMLDv2Report | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Reports (v2) sent. | ||||
| CtxMldIfStatsIncCrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD INC CRs (v2) sent | ||||
| CtxMldIfStatsExcCrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD EXC CRs (v2) sent | ||||
| CtxMldIfStatsToIncFmcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD TO_INC FMCRs (v2) sent | ||||
| CtxMldIfStatsToExcFmcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD TO_EXC FMCRs (v2) sent | ||||
| CtxMldIfStatsAllowSlcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD ALLOW SLCRs (v2) sent | ||||
| CtxMldIfStatsBlockSlcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD BLOCK SLCRs (v2) received. | ||||
| CerrMldIfStatsGeneralQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Queries errors. | ||||
| CerrMldIfStatsMASQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener MAS Queries errors. | ||||
| CerrMldIfStatsMASSQQuery | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener MASSQ Queries errors. | ||||
| CerrMldIfStatsMLDv1Report | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Report (v1) errors. | ||||
| CerrMldIfStatsMLDv1Done | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.31 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Done (v1/v2) errors. | ||||
| CerrMldIfStatsMLDv2Report | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.32 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD Listener Report (v2) errors. | ||||
| CerrMldIfStatsIncCrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.33 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD INC CRs (v2) errors. | ||||
| CerrMldIfStatsExcCrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.34 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD EXC CRs (v2) errors. | ||||
| CerrMldIfStatsToIncFmcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.35 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD TO_INC FMCRs (v2) errors. | ||||
| CerrMldIfStatsToExcFmcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.36 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD TO_EXC FMCRs (v2) errors. | ||||
| CerrMldIfStatsAllowSlcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.37 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD ALLOW SLCRs (v2) errors. | ||||
| CerrMldIfStatsBlockSlcrsv2 | 1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.38 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of MLD BLOCK SLCRs (v2) errors. | ||||
| SmldStatBadLength | 1.3.6.1.4.1.20301.2.7.15.3.2.23.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of bad length mld packet. | ||||
| SmldStatBadChecksum | 1.3.6.1.4.1.20301.2.7.15.3.2.23.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of bad checksum mld packet. | ||||
| SmldStatBadReceiveIf | 1.3.6.1.4.1.20301.2.7.15.3.2.23.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of bad reveive if mld packet. | ||||
| SmldStatReceiveNonLocal | 1.3.6.1.4.1.20301.2.7.15.3.2.23.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of non local received mld packet. | ||||
| SmldStatInvalidPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.23.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of invalid packets. | ||||
| SmldStatTotalL3Ipv6SgvEntries | 1.3.6.1.4.1.20301.2.7.15.3.2.23.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total L3 IPv6 (S, G, V) entries | ||||
| SmldStatTotalMLDGroups | 1.3.6.1.4.1.20301.2.7.15.3.2.23.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of MLD Groups. | ||||
| SmldStatClearAll | 1.3.6.1.4.1.20301.2.7.15.3.2.23.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear all MLD stats. Returns other(1) when read.
| ||||
| NipsecStats | 1.3.6.1.4.1.20301.2.7.15.3.2.24 | |||
| TipsecSaStatsTable | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec SA statistics. | ||||
| RipsecSaStatsEntry | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec SA statistics.
| ||||
| CipsecSaStatsIndex | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of ipsecSaStatsEntry. | ||||
| CipsecSaStatsSpi | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The SPI used by the SA. | ||||
| CipsecSaStatsProto | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The proto(AH,ESP,or Both) used by the SA.
| ||||
| CipsecSaStatsDstAddr | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.4 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The destination IP address for the SA. | ||||
| CipsecSaStatsUsageTime | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The time (in seconds) since the SA was first used. | ||||
| CipsecSaStatsBytes | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The count of bytes for the SA. | ||||
| CipsecSaStatsPkts | 1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of packets sent or received for the SA. | ||||
| NdhcpsnpStats | 1.3.6.1.4.1.20301.2.7.15.3.2.25 | |||
| SdhcpSnoopingStatInPacketRequest | 1.3.6.1.4.1.20301.2.7.15.3.2.25.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Counter of DHCP REQUEST messages received. | ||||
| SdhcpSnoopingStatInPacketReply | 1.3.6.1.4.1.20301.2.7.15.3.2.25.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Counter of DHCP REPLY messages received. | ||||
| SdhcpSnoopingStatDroppedPacketInvalid | 1.3.6.1.4.1.20301.2.7.15.3.2.25.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Counter of dropped DHCP messages due to invalid packet. | ||||
| SdhcpSnoopingStatDroppedPacketRateLimit | 1.3.6.1.4.1.20301.2.7.15.3.2.25.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Counter of dropped DHCP messages due to Rate Limit in software. | ||||
| SdhcpSnoopingStatDroppedPacketOther | 1.3.6.1.4.1.20301.2.7.15.3.2.25.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Counter of dropped DHCP messages due to other reason. | ||||
| Nlayer3Info | 1.3.6.1.4.1.20301.2.7.15.3.3 | |||
| NipRoutingInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.1 | |||
| TipDataRouteInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1 | NA | ||
table · not-accessible · current The table of run-time IP routes. | ||||
| RipDataRouteInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1 | NA | ||
| CipDataRouteInfoIndx | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of this route table. | ||||
| CipDataRouteInfoDestIp | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of this route. | ||||
| CipDataRouteInfoMask | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP mask of this route. | ||||
| CipDataRouteInfoGateway | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CipDataRouteInfoTag | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The tag-type for this route.
| ||||
| CipDataRouteInfoType | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the route.
| ||||
| CipDataRouteInfoInterface | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the destination address is applicable. Loopback interfaces are numbered starting with maximum allowed IP interfaces +1. | ||||
| CipDataRouteInfoGateway1 | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.8 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CipDataRouteInfoGateway2 | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.9 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CipDataRouteInfoMetric | 1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The Metric for this route. | ||||
| SrouteTableClear | 1.3.6.1.4.1.20301.2.7.15.3.3.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the route table.
| ||||
| TipMgmtRouteInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3 | NA | ||
table · not-accessible · current The table of run-time IP routes. | ||||
| RipMgmtRouteInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1 | NA | ||
| CipMgmtRouteInfoIndx | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of this route table. | ||||
| CipMgmtRouteInfoDestIp | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of this route. | ||||
| CipMgmtRouteInfoMask | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP mask of this route. | ||||
| CipMgmtRouteInfoGateway | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CipMgmtRouteInfoTag | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The tag-type for this route.
| ||||
| CipMgmtRouteInfoType | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the route.
| ||||
| CipMgmtRouteInfoInterface | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the destination address is applicable. | ||||
| CipMgmtRouteInfoGateway1 | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.8 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CipMgmtRouteInfoGateway2 | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.9 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CipMgmtRouteInfoMetric | 1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The Metric for this route. | ||||
| NarpInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.2 | |||
| TarpInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.2.1 | NA | ||
table · not-accessible · current The table of ARP entries. | ||||
| RarpInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1 | NA | ||
| CarpInfoDestIp | 1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of the ARP entry. | ||||
| CarpInfoMacAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.2 | PhysAddress | RO | |
column · PhysAddress · read-only · current The MAC address for the ARP entry. | ||||
| CarpInfoVLAN | 1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier for the ARP entry. | ||||
| CarpInfoSrcPort | 1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.4 | PortNumber | RO | |
column · PortNumber · read-only · current The port number on which this entry's equivalence is effective. | ||||
| CarpInfoFlag | 1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The flag associated with this ARP entry.
| ||||
| SarpCacheClear | 1.3.6.1.4.1.20301.2.7.15.3.3.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the ARP cache.
| ||||
| NvrrpInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.3 | |||
| TvrrpInfoVirtRtrTable | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1 | NA | ||
table · not-accessible · current The table of VRRP virtual router run-time information. | ||||
| RvrrpInfoVirtRtrTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1 | NA | ||
row · not-accessible · current The run-time information about a VRRP virtual router.
| ||||
| CvrrpInfoVirtRtrIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router index. | ||||
| CvrrpInfoVirtRtrState | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The VRRP virtual router state.
| ||||
| CvrrpInfoVirtRtrOwnership | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The VRRP virtual router ownership status.
| ||||
| CvrrpInfoVirtRtrConfig | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the VRRP virtual router.
| ||||
| CvrrpInfoVirtRtrID | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.5 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The VRRP virtual router identifier. | ||||
| CvrrpInfoVirtRtrAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The VRRP virtual router IP address. | ||||
| CvrrpInfoVirtRtrIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpInfoVirtRtrPriority | 1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.8 | INTEGER (1..254) | RO | |
column · INTEGER (1..254) · read-only · current The priority value to be used by the specified VRRP virtual routers. | ||||
| SvrrpInfoVirtGroupState | 1.3.6.1.4.1.20301.2.7.15.3.3.3.2 | DisplayString (SIZE (1..128)) | RO | |
scalar · DisplayString (SIZE (1..128)) · read-only · current VRRP group state. | ||||
| SvrrpInfoVirtGroupPriority | 1.3.6.1.4.1.20301.2.7.15.3.3.3.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current VRRP group priority. | ||||
| Nospfinfo | 1.3.6.1.4.1.20301.2.7.15.3.3.4 | |||
| NospfGeneralInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1 | |||
| SospfStartTime | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.1 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time when ospf has been started. | ||||
| SospfProcessUptime | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.2 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time since ospf has been started. | ||||
| SospfLsTypesSupported | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Link State Types that are supported. | ||||
| SospfIntfCountForRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of interfaces for this router. | ||||
| SospfVlinkCountForRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of virtual links for this router. | ||||
| SospfTotalNeighbours | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of OSPF neighbours. | ||||
| SospfNbrInInitState | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of neighbours in the initial state of exchange. | ||||
| SospfNbrInExchState | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of neighbours in the exchange state. | ||||
| SospfNbrInFullState | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of neighbours in the Full state of exchange. | ||||
| SospfTotalAreas | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of areas. | ||||
| SospfTotalTransitAreas | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of Transit areas. | ||||
| SospfTotalNssaAreas | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of NSSA areas. | ||||
| SospfTotalStubAreas | 1.3.6.1.4.1.20301.2.7.15.3.3.4.1.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of STUB areas. | ||||
| TospfAreaInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2 | NA | ||
table · not-accessible · current The table of OSPF Area information. | ||||
| RospfAreaInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1 | NA | ||
| CospfAreaInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF area number for which the OSPF info table is related. | ||||
| CospfAreaInfoId | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the OSPF area. | ||||
| CospfTotalNumberOfInterfaces | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of interfaces for this OSPF area. | ||||
| CospfNumberOfInterfacesUp | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The number of interfaces UP in area. | ||||
| CospfNumberOfLsdbEntries | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The number of Link State Database entries for this OSPF area. | ||||
| CospfAreaInfoAuthType | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Area authentication.
| ||||
| CospfAreaInfoLsTypesAccepted | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.7 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current LS types accepted by this area. | ||||
| CospfAreaInfoSPF | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Number of times SPF algorithm has been executed. | ||||
| CospfAreaInfoAreaBorderRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Count of ABR local to this area. | ||||
| CospfAreaInfoASBoundaryRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Count of ASBR local to this area. | ||||
| CospfAreaInfoTotalNeighbours | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of OSPF neighbors. | ||||
| CospfAreaInfoNeighborsINITstate | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Total neighbors in INIT state. | ||||
| CospfAreaInfoNeighborsEXCHstate | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Total neighbors in EXCH state. | ||||
| CospfAreaInfoNeighborsFULLstate | 1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Total neighbors in FULL state. | ||||
| TospfIntfInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3 | NA | ||
table · not-accessible · current The table of OSPF Interface information. | ||||
| RospfIntfInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1 | NA | ||
| CospfIfInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF interface number for which the OSPF info table is related. | ||||
| CospfIfInfoIpAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the OSPF interface. | ||||
| CospfIfInfoArea | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.3 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the area that the interface belongs. | ||||
| CospfIfInfoAdminStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Admin Status of the interface: down(0), up(1).
| ||||
| CospfIfInfoPassive | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Passive status of the interface: disabled(0), enabled(1).
| ||||
| CospfIfInfoRouterIP | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The router ID of the switch. | ||||
| CospfIfInfoState | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
| ||||
| CospfIfInfoPriority | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.8 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Interface router priority | ||||
| CospfIfInfoDesignatedRouterIP | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.9 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Designated Router IP (IP Address) for this OSPF interface. | ||||
| CospfIfInfoDesignatedRouterIpAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.10 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Designated Router IP Address for this OSPF interface. | ||||
| CospfIfInfoBackupDesignatedRouterIP | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.11 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Backup Designated Router IP for this OSPF interface. | ||||
| CospfIfInfoBackupDesignatedRouterIpAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.12 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Backup Designated Router Ip Address for this OSPF interface. | ||||
| CospfIfInfoHello | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.13 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The hello timer for this OSPF interface. | ||||
| CospfIfInfoHelloMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Hello interval
seconds(0),
milliseconds(1)
| ||||
| CospfIfInfoDead | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.15 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The dead timer for this OSPF interface. | ||||
| CospfIfInfoDeadMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Dead interval
seconds(0),
milliseconds(1)
| ||||
| CospfIfInfoWaitInterval | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Wait interval for this OSPF interface. | ||||
| CospfIfInfoWaitIntervalMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Wait interval
seconds(0),
milliseconds(1)
| ||||
| CospfIfInfoRetransmit | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.19 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current The retransmit interval for this OSPF interface. | ||||
| CospfIfInfoTransitDelay | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.20 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current The transit delay for this OSPF interface. | ||||
| CospfIfInfoTotalNeighbours | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current The Total number of neighbours for this OSPF interface. | ||||
| CospfIfInfoEvents | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of events for this OSPF interface. | ||||
| CospfIfInfoAuthType | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used: none(1) - no authentication, password(2) - use password, md5(3) - use MD5 authentication.
| ||||
| CospfIfInfoPtop | 1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Point-to-point status of the interface: disabled(0), enabled(1).
| ||||
| TospfVirtIntfInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4 | NA | ||
table · not-accessible · current The table of OSPF virtual interfaces information. | ||||
| RospfVirtIntfInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1 | NA | ||
row · not-accessible · current Information about an OSPF virtual interface. | ||||
| CospfVirtIntfInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Virtual Interface number for which this table is related. | ||||
| CospfVirtIntfInfoIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of this virtual interface. | ||||
| CospfVirtIntfInfoArea | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.3 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the OSPF area to which this virtual interface belongs. | ||||
| CospfVirtIntfInfoRouterId | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The Router ID. | ||||
| CospfVirtIntfInfoState | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current State disabled(0), enabled(1)
| ||||
| CospfVirtIntfInfoCost | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The cost of the virtual interface. | ||||
| CospfVirtIntfInfoTrans | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The transit delay for the virtual interface. | ||||
| CospfVirtIntfInfoHello | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.8 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval. | ||||
| CospfVirtIntfInfoHelloMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Hello interval seconds(0), milliseconds(1)
| ||||
| CospfVirtIntfInfoDead | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.10 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval. | ||||
| CospfVirtIntfInfoDeadMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Dead interval seconds(0), milliseconds(1)
| ||||
| CospfVirtIntfInfoWait | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.12 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Wait interval. | ||||
| CospfVirtIntfInfoWaitMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Wait interval seconds(0), milliseconds(1)
| ||||
| CospfVirtIntfInfoRetra | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.14 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval. | ||||
| CospfVirtIntfInfoAuth | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.15 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Authentication. | ||||
| CospfVirtIntfInfoEvents | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Events. | ||||
| CospfVirtIntfInfoNbr | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.17 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF neighbor for this virtual interface. | ||||
| CospfVirtIntfInfoNbrState | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current State down(0),attempt(1),init(2),2 way(3), exstart(4),exchange(5),loading(6),full(7)
| ||||
| CospfVirtIntfInfoAreaId | 1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.19 | IpAddress | RO | |
column · IpAddress · read-only · current The AreaId of the virtual interface. | ||||
| TospfIfNbrTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5 | NA | ||
table · not-accessible · current The table of OSPF Interface Neighbor information. | ||||
| RospfIfNbrEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1 | NA | ||
row · not-accessible · current Information about a OSPF interface, neighbor pair. | ||||
| CospfIfNbrIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Interface number for which this Interface/Nbr table is related. | ||||
| CospfIfNbrIpAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Neighbor ID . | ||||
| CospfIfNbrPriority | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The priority of the OSPF neighbor. | ||||
| CospfIfNbrState | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the OSPF neighbor.
| ||||
| CospfIfNbrDesignatedRtr | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the Designated Router for this OSPF Neighbor. | ||||
| CospfIfNbrBackupDesignatedRtr | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the backup designated Router for this OSPF Neighbor. | ||||
| CospfIfNbrIpAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.7 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF Neighbor. | ||||
| TospfSumRangesInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.6 | NA | ||
table · not-accessible · current The table of OSPF summary ranges information. | ||||
| RospfSumRangesInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1 | NA | ||
| CospfSumRangesInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF range index for which this table is related. | ||||
| CospfSumRangesInfoArea | 1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.2 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current Area. | ||||
| CospfSumRangesInfoNetwork | 1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Network. | ||||
| CospfSumRangesInfoMask | 1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Mask. | ||||
| CospfSumRangesInfoAction | 1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Action propagate(0), hide(1)
| ||||
| CospfSumRangesInfoListType | 1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Summary address list Non-NSSA(0), NSSA(1)
| ||||
| TospfRoutesInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.7 | NA | ||
table · not-accessible · current The table of OSPF routes information. | ||||
| RospfRoutesInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1 | NA | ||
| CospfRoutesInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF route table entry index for which this table is related. | ||||
| CospfRoutesInfoDestination | 1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Destination. | ||||
| CospfRoutesInfoMask | 1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Mask. | ||||
| CospfRoutesInfoVia | 1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Next hop. | ||||
| CospfRoutesInfoType | 1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.5 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Route type. Codes: IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 * - best | ||||
| TospfLsdbInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8 | NA | ||
table · not-accessible · current The OSPF Process's Link State Database. | ||||
| RospfLsdbInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1 | NA | ||
| CospfLsdbInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 32 bit index in the table. | ||||
| CospfLsdbInfoAreaId | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The 32 bit identifier of the Area from which the LSA was received. | ||||
| CospfLsdbInfoType | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertise- ment format.
| ||||
| CospfLsdbInfoLsid | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CospfLsdbInfoRouterId | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CospfLsdbInfoSequence | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.6 | OCTET STRING (SIZE (10)) | RO | |
column · OCTET STRING (SIZE (10)) · read-only · current The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal. | ||||
| CospfLsdbInfoAge | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state adver- tisement in seconds. | ||||
| CospfLsdbInfoChecksum | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CospfLsdbInfoAdvertisement | 1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.9 | OCTET STRING (SIZE (36)) | RO | |
column · OCTET STRING (SIZE (36)) · read-only · current The entire Link State Advertisement, including its header. When the LSA is invalid, it is message string 'Invalid LSDB'. | ||||
| TospfExtLsdbInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9 | NA | ||
table · not-accessible · current The OSPF Process's Links State Database. | ||||
| RospfExtLsdbInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1 | NA | ||
| CospfExtLsdbInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 32 bit index in the table. | ||||
| CospfExtLsdbInfoType | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertise- ment format.
| ||||
| CospfExtLsdbInfoLsid | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CospfExtLsdbInfoRouterId | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CospfExtLsdbInfoSequence | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.5 | OCTET STRING (SIZE (10)) | RO | |
column · OCTET STRING (SIZE (10)) · read-only · current The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal. | ||||
| CospfExtLsdbInfoAge | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state adver- tisement in seconds. | ||||
| CospfExtLsdbInfoChecksum | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CospfExtLsdbInfoAdvertisement | 1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.8 | OCTET STRING (SIZE (36)) | RO | |
column · OCTET STRING (SIZE (36)) · read-only · current The entire Link State Advertisement, including its header. | ||||
| TospfLoopIfInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10 | NA | ||
table · not-accessible · current The table of OSPF Loopback Interface information. | ||||
| RospfLoopIfInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1 | NA | ||
| CospfLoopIfInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF loopback interface number for which the OSPF info table is related. | ||||
| CospfLoopIfInfoIpAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the OSPF loopback interface. | ||||
| CospfLoopIfInfoArea | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the area that the loopback interface belongs. | ||||
| CospfLoopIfInfoAdminStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Admin Status of the interface: down(0), up(1).
| ||||
| CospfLoopIfInfoPassive | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Passive status of the interface: disabled(0), enabled(1).
| ||||
| CospfLoopIfInfoRouterIP | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The router ID of the switch. | ||||
| CospfLoopIfInfoState | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
| ||||
| CospfLoopIfInfoPriority | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.8 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Interface router priority | ||||
| CospfLoopIfInfoDesignatedRouterIP | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.9 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Designated Router IP (IP Address) for this OSPF interface. | ||||
| CospfLoopIfInfoDesignatedRouterIpAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.10 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Designated Router IP Address for this OSPF interface. | ||||
| CospfLoopIfInfoBackupDesignatedRouterIP | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.11 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Backup Designated Router IP for this OSPF interface. | ||||
| CospfLoopIfInfoBackupDesignatedRouterIpAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.12 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Backup Designated Router Ip Address for this OSPF interface. | ||||
| CospfLoopIfInfoHello | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.13 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The hello timer for this OSPF interface. | ||||
| CospfLoopIfInfoHelloMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Hello interval seconds(0), milliseconds(1)
| ||||
| CospfLoopIfInfoDead | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.15 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The dead timer for this OSPF interface. | ||||
| CospfLoopIfInfoDeadMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Dead interval seconds(0), milliseconds(1)
| ||||
| CospfLoopIfInfoWaitInterval | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Wait interval for this OSPF interface. | ||||
| CospfLoopIfInfoWaitIntervalMS | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Units of time measurement for Wait interval seconds(0), milliseconds(1)
| ||||
| CospfLoopIfInfoRetransmit | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.19 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current The retransmit interval for this OSPF interface. | ||||
| CospfLoopIfInfoTransitDelay | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.20 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current The transit delay for this OSPF interface. | ||||
| CospfLoopIfInfoTotalNeighbours | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current The Total number of neighbours for this OSPF interface. | ||||
| CospfLoopIfInfoEvents | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of events for this OSPF interface. | ||||
| CospfLoopIfInfoAuthType | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used: none(1) - no authentication, password(2) - use password, md5(3) - use MD5 authentication.
| ||||
| CospfLoopIfInfoPtop | 1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Point-to-point status of the interface: disabled(0), enabled(1).
| ||||
| NgatewayInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.5 | |||
| TgatewayInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.5.1 | NA | ||
table · not-accessible · current The table containing information for the default gateways. | ||||
| RgatewayInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.5.1.1 | NA | ||
| CgatewayInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.5.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The gateway number for which the information is related. | ||||
| CgatewayInfoAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.5.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the default gateway. | ||||
| CgatewayInfoStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.5.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the default gateway.
| ||||
| NigmpInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.6 | |||
| TigmpInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1 | NA | ||
table · not-accessible · current The table of IGMP group membership information. | ||||
| RigmpInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1 | NA | ||
| CigmpInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The igmp group number for which the IGMP info table is related. | ||||
| CigmpInfoGroupId | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the IGMP group. | ||||
| CigmpInfoVlanId | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The VLAN ID for this IGMP group. | ||||
| CigmpInfoSrcTrunk | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The downstream trunk number. | ||||
| CigmpInfoSrcPort | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.5 | PortNumber | RO | |
column · PortNumber · read-only · current The downstream port number. | ||||
| CigmpInfoVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The Version of IGMP host.
| ||||
| CigmpInfoExpires | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The expiration time for this host. | ||||
| CigmpInfoMode | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMPv3 filter-mode for this host. Returned values: exclude(1) - the IGMPv3 filter-mode is exclude. include(2) - the IGMPv3 filter-mode is include. na(3) - not applicable(v1 and v2).
| ||||
| CigmpInfoSourceIp | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.9 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address of the IGMP group. | ||||
| CigmpInfoFwd | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMPv3 forwarding for this source/group IP for this host.
| ||||
| CigmpInfoGrpExpires | 1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current The expiration time for the group. | ||||
| TigmpMrtrInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2 | NA | ||
table · not-accessible · current The table of IGMP mrouters. | ||||
| RigmpMrtrInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1 | NA | ||
| CigmpMrtrInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The mrouter number for which the IGMP mrouter info table is related. | ||||
| CigmpMrtrInfoVlanId | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The VLAN ID on which this IGMP mrouter is attached. | ||||
| CigmpMrtrInfoPortId | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.3 | PortNumber | RO | |
column · PortNumber · read-only · current The port on which this IGMP mrouter is attached. | ||||
| CigmpMrtrInfoVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The version of this IGMP mrouter.
| ||||
| CigmpMrtrInfoExpires | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The expiration time for this mrouter. | ||||
| CigmpMrtrInfoMrt | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The Maximum Query Response time of this IGMP mrouter. | ||||
| CigmpMrtrInfoQrv | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The Querier Robustness value of this IGMP mrouter. | ||||
| CigmpMrtrInfoQqic | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The Querier query interval code of this IGMP mrouter. | ||||
| CigmpMrtrInfoSrcIp | 1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.10 | IpAddress | RO | |
column · IpAddress · read-only · current The Source IP of this IGMP mrouter. | ||||
| SigmpClearTables | 1.3.6.1.4.1.20301.2.7.15.3.3.6.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear the IGMP tables. When setting clearGroups(1), the dynamic groups are removed, when setting clearMrouters(2), the mrouter tables are removed and when setting clearAll(3), both the dynamic groups and the mrouter tables are removed. When read, ok(0) is always returned.
| ||||
| NipInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.8 | |||
| SipInfoRouterID | 1.3.6.1.4.1.20301.2.7.15.3.3.8.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current Router ID information. | ||||
| SipInfoBootpRelayState | 1.3.6.1.4.1.20301.2.7.15.3.3.8.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of BOOTP relay.
| ||||
| SipInfoBootpRelayAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.8.5 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of BOOTP server. | ||||
| SipInfoBootpRelayAddr2 | 1.3.6.1.4.1.20301.2.7.15.3.3.8.6 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of second BOOTP server. | ||||
| SipInfoFwdState | 1.3.6.1.4.1.20301.2.7.15.3.3.8.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current IP forwarding global state.
| ||||
| SipInfoFwdDirectedBcast | 1.3.6.1.4.1.20301.2.7.15.3.3.8.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of forwarding directed broadcasts.
| ||||
| NipIntfInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.9 | |||
| TipIntfInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.9.1 | NA | ||
table · not-accessible · current The table of IP interface information. | ||||
| RintfInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1 | NA | ||
| CintfInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the information is related. | ||||
| CintfInfoAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The IP address of the interface. | ||||
| CintfInfoNetMask | 1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The subnet mask of the interface. | ||||
| CintfInfoBcastAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The broadcast address of the interface. | ||||
| CintfInfoVlan | 1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN number for this interface. | ||||
| CintfInfoStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the interface.
| ||||
| Nrip2Info | 1.3.6.1.4.1.20301.2.7.15.3.3.10 | |||
| Nrip2GeneralInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.10.1 | |||
| SripInfoState | 1.3.6.1.4.1.20301.2.7.15.3.3.10.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current RIP global state.
| ||||
| SripInfoUpdatePeriod | 1.3.6.1.4.1.20301.2.7.15.3.3.10.1.2 | INTEGER (1..120) | RO | |
scalar · INTEGER (1..120) · read-only · current Update Period in seconds. | ||||
| Trip2InfoIntfTable | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2 | NA | ||
table · not-accessible · current The information table of RIP. | ||||
| RripInfoIntfEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1 | NA | ||
| CripInfoIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the RIP information is related. | ||||
| CripInfoIntfVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current RIP version.
| ||||
| CripInfoIntfAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The interface address. | ||||
| CripInfoIntfState | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of RIP protocol.
| ||||
| CripInfoIntfListen | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The status of listening to route updates.
| ||||
| CripInfoIntfTrigUpdate | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The status of triggered updates.
| ||||
| CripInfoIntfMcastUpdate | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The status of multicast updates.
| ||||
| CripInfoIntfPoisonReverse | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The status of RIP poison reverse.
| ||||
| CripInfoIntfSupply | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The status of supplying route updates.
| ||||
| CripInfoIntfMetric | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.10 | INTEGER (1..15) | RO | |
column · INTEGER (1..15) · read-only · current RIP route metric for this interface. | ||||
| CripInfoIntfAuth | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The type of Authentication used on this interface.
| ||||
| CripInfoIntfKey | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.12 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current RIP update authentication password. | ||||
| CripInfoIntfDefault | 1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies what RIP does with default routes.
| ||||
| Trip2InfoRtrTable | 1.3.6.1.4.1.20301.2.7.15.3.3.10.3 | NA | ||
table · not-accessible · current The routing information table of RIP. | ||||
| RripInfoRtrEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1 | NA | ||
| CripInfoRtrIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index number of RIP route. | ||||
| CripInfoRtrDestIp | 1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The destination ip address of this route. | ||||
| CripInfoRtrMask | 1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The destination ip mask of this route. | ||||
| CripInfoRtrGateway | 1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CripInfoRtrMetric | 1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The metric for this route. | ||||
| NbgpInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.11 | |||
| TbgpInfoPeerTable | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1 | NA | ||
table · not-accessible · current The table of BGP peer in the current configuration block. | ||||
| RbgpInfoPeerEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1 | NA | ||
| CbgpInfoPeerIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP peer number for which the BGP peer table is related. | ||||
| CbgpInfoPeerRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The remote IP address of the BGP peer. | ||||
| CbgpInfoPeerVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The version negotiated by the BGP peer. | ||||
| CbgpInfoPeerTtl | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The time-to-live value of the BGP peer IP datagram. | ||||
| CbgpInfoPeerRemoteAs | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The remote IP address of the BGP peer. | ||||
| CbgpInfoPeerRouterId | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The router IP address. | ||||
| CbgpInfoPeerState | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The BGP status.
| ||||
| CbgpInfoPeerLastState | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The BGP old status.
| ||||
| CbgpInfoTotalReceivedPackets | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of received packets. | ||||
| CbgpInfoTotalSentPackets | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of sent packets. | ||||
| CbgpInfoReceivedUpdates | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The number of received updates. | ||||
| CbgpInfoSentUpdates | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The number of sent updates. | ||||
| CbgpInfoKeepalive | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The keep alive time. | ||||
| CbgpInfoHoldtime | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The hold time. | ||||
| CbgpInfoMinAdvTime | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The MinAdvTime. | ||||
| CbgpInfoLastErrorCode | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The last error code. | ||||
| CbgpInfoLastErrorSubCode | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The last error subcode. | ||||
| CbgpInfoEstTransitions | 1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The established state transitions. | ||||
| TbgpInfoSummaryTable | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2 | NA | ||
table · not-accessible · current The table of BGP Peer Information. | ||||
| RbgpInfoSummaryEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1 | NA | ||
| CbgpInfoSummaryIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP Peer number for which the BGP Peer table is related. | ||||
| CbgpInfoSummaryRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The remote IP address of the BGP Peer. | ||||
| CbgpInfoSummaryVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The version negotiated by the BGP Peer. | ||||
| CbgpInfoSummaryRemoteAs | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The Remote AS. | ||||
| CbgpInfoSummaryState | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The BGP status.
| ||||
| CbgpInfoSummaryTotalReceivedPackets | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of received packets. | ||||
| CbgpInfoSummaryTotalSentPackets | 1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of sent packets. | ||||
| TbgpInfoRtrTable | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3 | NA | ||
table · not-accessible · current The table of BGP router run-time information | ||||
| RbgpInfoRtrTableEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1 | NA | ||
| CbgpInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The BGP router index which is the network address. | ||||
| CbgpInfoNetwork | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The BGP network address. | ||||
| CbgpInfoNextHop | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The BGPs NextHop addresses from a network. | ||||
| CbgpInfoMetr | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The BGPs metric from a network. | ||||
| CbgpInfoLcPrf | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The BGPs local preference from a network. | ||||
| CbgpInfoWght | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Total weight of AS paths from a network. | ||||
| CbgpInfoPath | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The AS paths from a network. | ||||
| CbgpInfoOrigin | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The BGPs route origin from a network | ||||
| CbgpInfoMask | 1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current The BGP router subnet mask. | ||||
| TbgpInfoGroupTable | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4 | NA | ||
table · not-accessible · current The table of BGP group in the current configuration block. | ||||
| RbgpInfoGroupEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1 | NA | ||
| CbgpInfoGroupIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP group number for which the BGP group table is related. | ||||
| CbgpInfoGroupName | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The BGP group nname for which the BGP group table is related. | ||||
| CbgpInfoGroupRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The remote IP address of the BGP group. | ||||
| CbgpInfoGroupRemoteMask | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The remote mask of the BGP group. | ||||
| CbgpInfoGroupLimit | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum number of BGP dynamic peers. | ||||
| CbgpInfoGroupPeersNum | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of BGP dynamic peers. | ||||
| CbgpInfoGroupState | 1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current BGP group state.
| ||||
| TbgpInfoGroupRASTable | 1.3.6.1.4.1.20301.2.7.15.3.3.11.5 | NA | ||
table · not-accessible · current The table of BGP group RASs in the current configuration block. | ||||
| RbgpInfoGroupRASEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.11.5.1 | NA | ||
row · not-accessible · current Information about a BGP group RAS. | ||||
| CbgpInfoGroupRASIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.11.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP group RAS number for which the BGP group RAS table is related. | ||||
| CbgpInfoGroupRAS | 1.3.6.1.4.1.20301.2.7.15.3.3.11.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The remote AS number of the BGP group bgpInfoGroupIndex. | ||||
| TbgpInfoDynamicPeerTable | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6 | NA | ||
table · not-accessible · current The table of BGP dynamic peers. | ||||
| RbgpInfoDynamicPeerEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1 | NA | ||
| CbgpInfoDynamicPeerIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The BGP dynamic peer number for which the BGP peer table is related. | ||||
| CbgpInfoDynamicPeerRemoteAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The remote IP address of the BGP dynamic peer. | ||||
| CbgpInfoDynamicPeerGroup | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The group of BGP dynamic peer. | ||||
| CbgpInfoDynamicPeerVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The version negotiated by the BGP dynamic peer. | ||||
| CbgpInfoDynamicPeerTtl | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The time-to-live value of the BGP dynamic peer IP datagram. | ||||
| CbgpInfoDynamicPeerRemoteAs | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The remote AS number of the BGP dynamic peer. | ||||
| CbgpInfoDynamicPeerRouterId | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.7 | IpAddress | RO | |
column · IpAddress · read-only · current The router IP address. | ||||
| CbgpInfoDynamicTotalReceivedPackets | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of received packets. | ||||
| CbgpInfoDynamicTotalSentPackets | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of sent packets. | ||||
| CbgpInfoDynamicReceivedUpdates | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The number of received updates. | ||||
| CbgpInfoDynamicSentUpdates | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The number of sent updates. | ||||
| CbgpInfoDynamicKeepalive | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The keep alive time. | ||||
| CbgpInfoDynamicHoldtime | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The hold time. | ||||
| CbgpInfoDynamicMinAdvTime | 1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The MinAdvTime. | ||||
| NnbrInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.12 | |||
| TnbrInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1 | NA | ||
table · not-accessible · current The table of nbrcache information. | ||||
| RnbrInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1 | NA | ||
| CnbrInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the nbrcache entry. | ||||
| CnbrInfoDestIp | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The destination IP address of the nbrcache entry. | ||||
| CnbrInfoState | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the nbrcache entry.
| ||||
| CnbrInfoMacAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.4 | PhysAddress | RO | |
column · PhysAddress · read-only · current The MAC address for the nbrcache entry. | ||||
| CnbrInfoVlanId | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier for the nbrcache entry. | ||||
| CnbrInfoPortNum | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The port number on which this entry's equivalence is effective. | ||||
| CnbrInfoAge | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The used time for the nbrcache entry. | ||||
| CnbrInfoInterface | 1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the destination address is applicable. | ||||
| SnbrClear | 1.3.6.1.4.1.20301.2.7.15.3.3.12.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the Nbr cache, When read ok(1) is returned.
| ||||
| NgatewayIPv6Info | 1.3.6.1.4.1.20301.2.7.15.3.3.13 | |||
| TgatewayIPv6InfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.13.1 | NA | ||
table · not-accessible · current The table containing information for the IPv6 default gateways. | ||||
| RgatewayIPv6InfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.13.1.1 | NA | ||
row · not-accessible · current A row in the IPv6 gateway information table | ||||
| CipGatewayIPv6InfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.13.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IPv6 gateway number for which the information is related. | ||||
| CipGatewayIPv6InfoAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.13.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address for the IPv6 default gateway. | ||||
| CipGatewayIPv6InfoState | 1.3.6.1.4.1.20301.2.7.15.3.3.13.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The state for the IPv6 Default Gateway.
| ||||
| NipRoute6Info | 1.3.6.1.4.1.20301.2.7.15.3.3.14 | |||
| TipRoute6InfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.14.1 | NA | ||
table · not-accessible · current The table of run-time IP6 routes. | ||||
| RipRoute6InfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1 | NA | ||
| CipRoute6InfoIndx | 1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of this route6 table. | ||||
| CipRoute6InfoDestIp | 1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The destination of the route. | ||||
| CipRoute6InfoPrefLen | 1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.3 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The destination prefix length of the route. | ||||
| CipRoute6InfoInterface | 1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The interface of the route. | ||||
| CipRoute6InfoNextHop | 1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The next hop of the route. | ||||
| CipRoute6InfoProto | 1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The protocol type of the route.
| ||||
| NdhcpInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.15 | |||
| SdhcpInfoMacAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.15.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current The MAC address of the interface. | ||||
| SdhcpInfoAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.15.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the interface. | ||||
| SdhcpInfoSubnetMask | 1.3.6.1.4.1.20301.2.7.15.3.3.15.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The subnet mask of the interface. | ||||
| SdhcpInfoDefaultGateway | 1.3.6.1.4.1.20301.2.7.15.3.3.15.4 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of default gateway for the interface. | ||||
| SdhcpInfoServer | 1.3.6.1.4.1.20301.2.7.15.3.3.15.5 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the DHCP server that leased the ip of the interface. | ||||
| SdhcpInfoLeaseObtained | 1.3.6.1.4.1.20301.2.7.15.3.3.15.6 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The time and date when the lease was obtained . | ||||
| SdhcpInfoLeaseExpires | 1.3.6.1.4.1.20301.2.7.15.3.3.15.7 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The time and date when the lease was obtained . | ||||
| NipIntfLoopbackInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.16 | |||
| TipIntfLoopbackInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.16.1 | NA | ||
table · not-accessible · current The table of IP Loopback interface information. | ||||
| RintfLoopbackInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1 | NA | ||
row · not-accessible · current A row in IP Loopback interface information table. | ||||
| CintfLoopbackInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Loopback interface number for which the information is related. | ||||
| CintfLoopbackInfoAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The IP address of the interface. | ||||
| CintfLoopbackInfoNetMask | 1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The subnet mask of the interface. | ||||
| CintfLoopbackInfoBcastAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The broadcast address of the interface. | ||||
| CintfLoopbackInfoStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the interface.
| ||||
| Nospf3Info | 1.3.6.1.4.1.20301.2.7.15.3.3.18 | |||
| Nospf3GeneralInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1 | |||
| Sospf3Version | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPF version.
| ||||
| Sospf3RouterID | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current The router ID of the switch. | ||||
| Sospf3StartTime | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The time when ospf has been started. | ||||
| Sospf3ProcessUptime | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The time since ospf has been started. | ||||
| Sospf3AreaBorderRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Area Border Router Role.
| ||||
| Sospf3ASBoundaryRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current AS Boundary Router Role.
| ||||
| Sospf3ExternalLsa | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of external LSAs. | ||||
| Sospf3IntfCountForRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of interfaces for this router. | ||||
| Sospf3VlinkCountForRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of virtual links for this router. | ||||
| Sospf3NewLsaReceived | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of new LSAs reveived. | ||||
| Sospf3TotalLsaOriginated | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of LSAs originated. | ||||
| Sospf3TotalNumberOfAsScopeLsas | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of entries in the Link State Database. | ||||
| Sospf3TotalNeighbours | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of OSPF neighbours. | ||||
| Sospf3NbrInXchgOrLoadState | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of neighbours in the exchange or loading state. | ||||
| Sospf3TotalAreas | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.15 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of areas. | ||||
| Sospf3TotalActiveAreas | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.16 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of areas containing active interfaces. | ||||
| Sospf3TotalNssaAreas | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.17 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of NSSA areas. | ||||
| Sospf3OverFlowState | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.18 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates whether router is in overflow state or not.
| ||||
| Sospf3SpfDelay | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.19 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current The Delay at which routing calculation is carried after a topology change. | ||||
| Sospf3SpfHoldTime | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.20 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current The minimum time between two consecutive SPF calculations. | ||||
| Sospf3ABRType | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.21 | INTEGER | RO | |
scalar · INTEGER · read-only · current Different Types of ABRs supported
| ||||
| Sospf3NssaAsbrDefRtTrans | 1.3.6.1.4.1.20301.2.7.15.3.3.18.1.22 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When disabled, P-Bit is clear in the generated default Lsa. When enabled, P-Bit is set in the generated Type-7 default Lsa.
| ||||
| Tospf3AreaInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2 | NA | ||
table · not-accessible · current The table of OSPFv3 Area information. | ||||
| Rospf3AreaInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1 | NA | ||
| Cospf3AreaInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 area number for which the OSPFv3 info table is related. | ||||
| Cospf3AreaInfoId | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the OSPFv3 area. | ||||
| Cospf3AreaInfoStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Area Status: active(1), notInService(2), notReady(3).
| ||||
| Cospf3TotalNumberOfInterfaces | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of interfaces for this OSPFv3 area. | ||||
| Cospf3NumberOfInterfacesUp | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The number of interfaces UP in area. | ||||
| Cospf3AreaInfoSPF | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The number of times SPF ran. | ||||
| Cospf3NumberOfLsdbEntries | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of Area-scope link state advertisements in this area's link state database. | ||||
| Cospf3AreaInfoAreaBorderRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The Area Border Router count. | ||||
| Cospf3AreaInfoASBoundaryRouter | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The AS Boundary Router count. | ||||
| Cospf3AreaInfoNeighborsFULLstate | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Total neighbors in FULL state. | ||||
| Cospf3AreaInfoVirtNeighborsFULLstate | 1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Total neighbors in FULL state. | ||||
| Tospf3IntfInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3 | NA | ||
table · not-accessible · current The table of OSPFv3 Interface information. | ||||
| Rospf3IntfInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1 | NA | ||
| Cospf3IfInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 interface number for which the OSPFv3 info table is related. | ||||
| Cospf3IfInfoInstanceID | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The OSPFv3 interface instance id. | ||||
| Cospf3IfInfoLLocalAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The IP address of the OSPFv3 interface. | ||||
| Cospf3IfInfoAreaID | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The AreaID of the area that the interface belongs. | ||||
| Cospf3IfInfoAdminStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Admin Status of the interface: down(0), up(1).
| ||||
| Cospf3IfInfoPassive | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Passive status of the interface: disabled(0), enabled(1).
| ||||
| Cospf3IfInfoNetworkType | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Network type of the interface: broadcast(1),nbma(2),pointToPoint(3),pointToMultipoint(5).
| ||||
| Cospf3IfInfoState | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
| ||||
| Cospf3IfInfoPriority | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.9 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Interface router priority | ||||
| Cospf3IfInfoDesignatedRouterID | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.10 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPFv3 Designated Router ID for this OSPFv3 interface. | ||||
| Cospf3IfInfoBackupDesignatedRouterID | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.11 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPFv3 Backup Designated Router ID for this OSPFv3 interface. | ||||
| Cospf3IfInfoHello | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.12 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The hello timer for this OSPF3 interface. | ||||
| Cospf3IfInfoDead | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.13 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The dead timer for this OSPFv3 interface. | ||||
| Cospf3IfInfoPoll | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 Poll interval for this OSPFv3 interface. | ||||
| Cospf3IfInfoRetransmit | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.15 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current The retransmit interval for this OSPFv3 interface. | ||||
| Cospf3IfInfoTransitDelay | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.16 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current The transit delay for this OSPFv3 interface. | ||||
| Cospf3IfInfoTotalNeighbours | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of neighbours for this OSPFv3 interface. | ||||
| Cospf3IfInfoEvents | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of events for this OSPF3 interface. | ||||
| Cospf3IfInfoMetricCost | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current The cost of this OSPF3 interface. | ||||
| Cospf3IfInfoAuthSpi | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.20 | Unsigned32 (256..4294967295) | RO | |
column · Unsigned32 (256..4294967295) · read-only · current Authentication Spi Id(256 - 4294967295) | ||||
| Cospf3IfInfoAuthEnable | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication Status disabled(0), enabled(1)
| ||||
| Cospf3IfInfoAuthType | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication Type none(0), md5(2), sha1(1)
| ||||
| Cospf3IfInfoAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.23 | OCTET STRING (SIZE (4..40)) | RO | |
column · OCTET STRING (SIZE (4..40)) · read-only · current Authentication Key Hex-string MD5 key - 32 chars (128 bits) Hex-string SHA-1 key - 40 chars (160 bits) | ||||
| Cospf3IfInfoEncrySpi | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.24 | Unsigned32 (256..4294967295) | RO | |
column · Unsigned32 (256..4294967295) · read-only · current Encryption Spi Id(256 - 4294967295) | ||||
| Cospf3IfInfoEncryEnable | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current Encryption Status disabled(0), enabled(1)
| ||||
| Cospf3IfInfoEncryType | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current Encryption Authentication Type null(0), 3des(2), aes(3)
| ||||
| Cospf3IfInfoEncryKey | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.27 | OCTET STRING (SIZE (4..48)) | RO | |
column · OCTET STRING (SIZE (4..48)) · read-only · current Encryption Key Hex-string AES key - 32 chars (128 bits) Hex-string 3DES key - 48 chars (192 bits) | ||||
| Cospf3IfInfoEncryAuthType | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current Encryption Authentication Type none(0), md5(2), sha1(1)
| ||||
| Cospf3IfInfoEncryAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.29 | OCTET STRING (SIZE (4..40)) | RO | |
column · OCTET STRING (SIZE (4..40)) · read-only · current Encryption Authentication Key Hex-string MD5 key - 32 chars (128 bits) Hex-string SHA-1 key - 40 chars (160 bits) | ||||
| Cospf3IfInfoLsaSupress | 1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current Lsa supression status of the interface: disabled(0), enabled(1).
| ||||
| Tospf3VirtIntfInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4 | NA | ||
table · not-accessible · current The table of OSPFv3 Virtual Interface information. | ||||
| Rospf3VirtIntfInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1 | NA | ||
row · not-accessible · current Information about a single virtual interface.
| ||||
| Cospf3VirtIfInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 virtual interface number for which the OSPFv3 info table is related. | ||||
| Cospf3VirtIfInfoAreaId | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The transit area that the virtual link traverses. By definition, this is not Area 0. | ||||
| Cospf3VirtIfInfoNeighbor | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Router ID of the virtual neighbor. | ||||
| Cospf3VirtIfInfoTransitDelay | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The estimated number of seconds it takes to transmit a Link State Update packet over this interface.
| ||||
| Cospf3VirtIfInfoRetransInterval | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State Request packets. This value should be well over the expected round-trip time.
| ||||
| Cospf3VirtIfInfoHelloInterval | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
| ||||
| Cospf3VirtIfInfoRtrDeadInterval | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
| ||||
| Cospf3VirtIfInfoState | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current OSPF virtual interface states.
| ||||
| Cospf3VirtIfInfoEvents | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime. | ||||
| Cospf3VirtIfInfoStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| Cospf3VirtIfInfoLinkScopeLsaCount | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The total number of Link-scope link state advertisements in this virtual link's link state database. | ||||
| Cospf3VirtIfInfoLinkLsaCksumSum | 1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this virtual link's link state database. The sum can be used to determine if there has been a change in a router's link state database or to compare the link state database of two routers. | ||||
| Tospf3IfNbrTable | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5 | NA | ||
table · not-accessible · current The table of OSPFv3 Interface Neighbor information. | ||||
| Rospf3IfNbrEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1 | NA | ||
row · not-accessible · current Information about a OSPFv3 interface, neighbor pair.
| ||||
| Cospf3IfNbrInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 neighbor table entry index for which this table is related. | ||||
| Cospf3IfNbrIntfIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 Interface number for which this Nbr table is related. | ||||
| Cospf3IfNbrIntfInstanceID | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The OSPFv3 Interface instance id for which this Nbr table is related. | ||||
| Cospf3IfNbrRtrID | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current A 32-bit unsigned integer uniquely identifying the neighboring router in the Autonomous System. | ||||
| Cospf3IfNbrIpAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 address of the neighbor associated with the local link. | ||||
| Cospf3IfNbrPriority | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The priority of the OSPFv3 neighbor. | ||||
| Cospf3IfNbrState | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the relationship with this neighbor.
| ||||
| Cospf3IfNbrEvents | 1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The number of times this neighbor relationship has changed state or an error has occurred. | ||||
| Tospf3RoutesInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6 | NA | ||
table · not-accessible · current The table of OSPFv3 routes information. | ||||
| Rospf3RoutesInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1 | NA | ||
| Cospf3RoutesInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPFv3 route table entry index for which this table is related. | ||||
| Cospf3RoutesInfoDestination | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The Destination IPv6 Address of this route. | ||||
| Cospf3RoutesInfoPrefixLen | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.3 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current Indicates the prefix length of the destination Address. | ||||
| Cospf3RoutesInfoNextHop | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Next Hop IPv6 Address for this route. For direct routes it has the value ::0. | ||||
| Cospf3RoutesInfoType | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Type of the route
| ||||
| Cospf3RoutesInfoAreaId | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current Area ID associated with the route | ||||
| Cospf3RoutesInfoCost | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.7 | INTEGER (1..16777215) | RO | |
column · INTEGER (1..16777215) · read-only · current It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost are present, Type1 external metrics always take precedence. | ||||
| Cospf3RoutesInfoType2Cost | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.8 | INTEGER (1..16777215) | RO | |
column · INTEGER (1..16777215) · read-only · current Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the need for conversion of external costs to
internal link state metrics. | ||||
| Cospf3RoutesInfoInterfaceIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.9 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current Interface Index associated with the route | ||||
| NipEcmpRoutingInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.19 | |||
| TipRouteEcmpInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1 | NA | ||
table · not-accessible · current The table of run-time IP routes. | ||||
| RipRouteEcmpInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1 | NA | ||
row · not-accessible · current A row in the run-time IP route table | ||||
| CipRouteEcmpInfoDestIndx | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of unique destinations IP. | ||||
| CipRouteEcmpInfoGwIndx | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the gateway per destination. | ||||
| CipRouteEcmpInfoDest | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP of this route. | ||||
| CipRouteEcmpInfoMask | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP mask of this route. | ||||
| CipRouteEcmpInfoGateway | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CipRouteEcmpInfoInterface | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The interface for the next-hop. | ||||
| CipRouteEcmpInfoGwStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The Up/Down status of the gateway
| ||||
| NipEcmpHash | 1.3.6.1.4.1.20301.2.7.15.3.3.20 | |||
| SipEcmpHashSIPAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.20.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The SIP Address. | ||||
| SipEcmpHashDIPAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.20.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The DIP Address (enter 0 for SIP only). | ||||
| SipEcmpHashNumberPaths | 1.3.6.1.4.1.20301.2.7.15.3.3.20.3 | INTEGER (2..5) | RW | |
scalar · INTEGER (2..5) · read-write · current The number of ECMP paths. | ||||
| SipEcmpHashRouteNumber | 1.3.6.1.4.1.20301.2.7.15.3.3.20.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The result of the hash algorithm. For this to work the values for ipEcmpHashSIPAddr, ipEcmpHashDIPAddr, ipEcmpHashNumberPaths must be set. If the result is 0 ipEcmpHashNumberPaths is not correctly set. | ||||
| Nipv6PmtuInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.21 | |||
| Tipv6PmtuInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.21.1 | NA | ||
table · not-accessible · current The table of Ipv6 PMTU entries. | ||||
| Ripv6PmtuInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1 | NA | ||
| Cipv6PmtuInfoIndx | 1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of this ipv6 PMTU table entries. | ||||
| Cipv6PmtuInfoDestIp | 1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The destination of the pMTU. | ||||
| Cipv6PmtuInfoSinceTime | 1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The addubt time of the pMTU. | ||||
| Cipv6PmtuInfoValue | 1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The vlaue of this ipv6 PMTU table entries. | ||||
| NmldInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.22 | |||
| TmldInfoGroupsTable | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1 | NA | ||
table · not-accessible · current The table listing the IPv6 multicast groups for which there are members on a particular interface. | ||||
| RmldInfoGroupEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1 | NA | ||
| CmldInfoGroupIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The internetwork-layer interface for which this entry contains information for an IPv6 multicast group address. | ||||
| CmldInfoGroupAddress | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.2 | InetAddressIPv6 | RO | |
column · InetAddressIPv6 · read-only · current The IPv6 multicast group address for which this entry contains information. Its address MUST be of format: 2x:2x:2x:2x:2x:2x:2x:2x | ||||
| CmldInfoGroupPortNumber | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The port number for which this entry contains information for an IPv6 multicast group address. | ||||
| CmldInfoGroupVlanID | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN ID for which this entry contains information for an IPv6 multicast group address. | ||||
| CmldInfoGroupLastReporter | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.5 | InetAddressIPv6 | RO | |
column · InetAddressIPv6 · read-only · current The IPv6 address of the source of the last membership report received for this IPv6 Multicast group address on this interface. If no membership report has been received, this object has the value 00:0:00:00:00:00:00:00. Its address MUST be of format:2x:2x:2x:2x:2x:2x:2x:2x | ||||
| CmldInfoGroupSource | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.6 | InetAddressIPv6 | RO | |
column · InetAddressIPv6 · read-only · current ONLY for MLDv2. The IPv6 address for which the this entry's filter is applied. Its address MUST be of format: 2x:2x:2x:2x:2x:2x:2x:2x | ||||
| CmldInfoGroupFilterType | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current ONLY for MLDv2. The filter type for the specified source. | ||||
| CmldInfoGroupExpiryTime | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The minimum amount of time remaining before this entry will be aged out. A value of 0 indicates that the entry is only present because mldCacheSelf is true and that if the router left the group, this entry would be aged out immediately. Note that some implementations may process Membership Reports from the local system in the same way as reports from other hosts, so a value of 0 is not required. | ||||
| CmldInfoGroupVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The version of this MLD entry. | ||||
| CmldInfoGroupFwd | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Specifies if forwarding is enabled for this entry. | ||||
| CmldInfoGroupId | 1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current MLD group index. | ||||
| TmldInfoMRoutersTable | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2 | NA | ||
table · not-accessible · current The table listing the IPv6 multicast routers on an interface. | ||||
| RmldInfoMRouterEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1 | NA | ||
| CmldInfoMRouterIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface on which the multicast router is learnt. | ||||
| CmldInfoMRouterSrcIp | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.2 | InetAddressIPv6 | RO | |
column · InetAddressIPv6 · read-only · current The multicast router's ip. | ||||
| CmldInfoMRouterPortNumber | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The port on which the multicast router is learnt. | ||||
| CmldInfoMRouterVlan | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan in which the multicast router is learnt. | ||||
| CmldInfoMRouterQrv | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This multicast router's Maximum Response Delay | ||||
| CmldInfoMRouterQqic | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current ONLY for MLDv2. This multicast router's QQIC | ||||
| CmldInfoMRouterMaxRespDelay | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This multicast router's Maximum Response Delay. | ||||
| CmldInfoMRouterVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This multicast router's MLD version. | ||||
| CmldInfoMRouterExpiryTime | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current This multicast router's expiry time. | ||||
| CmldInfoMRouterId | 1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This multicast router's index. | ||||
| SmldClearTables | 1.3.6.1.4.1.20301.2.7.15.3.3.22.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear the MLD tables. When setting clearGroups(1), the dynamic groups are removed, when setting clearMrouters(2), the mrouter tables are removed and when setting clearAll(3), both the dynamic groups and the mrouter tables are removed. When read, none(0) is always returned.
| ||||
| TmldInfoInterfaceTable | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4 | NA | ||
table · not-accessible · current The (conceptual) table listing the informatio of interfaces on which MLD is enabled. | ||||
| RmldInfoInterfaceEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing the information of an interface on which MLD is enabled. | ||||
| CmldInfoInterfaceIfIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The internetwork-layer interface value of the interface for which MLD is enabled. | ||||
| CmldInfoInterfaceState | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The internetwork-layer interface value of the interface for which MLD is enabled.
| ||||
| CmldInfoInterfaceVersion | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The version of MLD which is running on this interface. This object is a place holder to allow for new versions of MLD to be introduced. Version 1 of MLD is defined in RFC 2710. | ||||
| CmldInfoInterfaceQuerierStatus | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies if the switch is Querier or not | ||||
| CmldInfoInterfaceQuerier | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.5 | InetAddressIPv6 | RO | |
column · InetAddressIPv6 · read-only · current The address of the MLD Querier on the IPv6 subnet to which this interface is attached. Its address MUST be of format:2x:2x:2x:2x:2x:2x:2x:2x | ||||
| CmldInfoInterfaceQuerierExpiryTime | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The time remaining before the Other Querier Present Timer expires. If the local system is the querier, the value of this object is zero. | ||||
| CmldInfoInterfaceQuerierPort | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The port on which the Querier is learnt. If the local system is the querier, the value of this object is zero. | ||||
| CmldInfoInterfaceGroups | 1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The current number of entries for this interface in the Cache Table. | ||||
| NipsecInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.23 | |||
| TipsecSaInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec SA information. | ||||
| RipsecSaInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec SA information.
| ||||
| CipsecSaInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of ipsecSaInfoEntry. | ||||
| CipsecSaInfoSpi | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The SPI used by the SA. | ||||
| CipsecSaInfoProto | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The proto(AH,ESP,or Both) used by the SA.
| ||||
| CipsecSaInfoDstAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.4 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The destination IP address for the SA. | ||||
| CipsecSaInfoSrcAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.5 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The source IP address for the SA. | ||||
| CipsecSaInfoFlags | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The direction, initiator and etc for an SA; see flag constants below: SA_FLAG_INUSE 0x0001 SA_FLAG_DELETED 0x0002 SA_FLAG_INBOUND 0x0004 SA_FLAG_INITIATOR 0x0008 SA_FLAG_MATURE 0x0010 SA_FLAG_MIRRORED 0x0100 SA_FLAG_IP6 0x0200 SA_FLAG_IKE2 0x0400 SA_FLAG_PFS 0x0800 | ||||
| CipsecSaInfoUlp | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The upper layer protocol for an SA; 0=any; see protocol constants below: ICMP 1 IPv4 4 TCP 6 UDP 17 ESP 50 AH 51 IPv6 41 ICMPv6 58 | ||||
| CipsecSaInfoMode | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The mode for the SA.
| ||||
| CipsecSaInfoAuthAlg | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The authentication algorithm for the SA.
| ||||
| CipsecSaInfoAuthKey | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.10 | OCTET STRING (SIZE (20..64)) | RO | |
column · OCTET STRING (SIZE (20..64)) · read-only · current The authentication key for the SA. | ||||
| CipsecSaInfoEncrAlg | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The encryption algorithm for the SA.
| ||||
| CipsecSaInfoEncrKey | 1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.12 | OCTET STRING (SIZE (20..64)) | RO | |
column · OCTET STRING (SIZE (20..64)) · read-only · current The encryption key for the SA. | ||||
| TipsecSpdInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2 | NA | ||
table · not-accessible · current The (conceptual) table listing all of the IPsec security policy information. | ||||
| RipsecSpdInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a IPsec security policy information.
| ||||
| CipsecSpdInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of ipsecSpdInfoEntry. | ||||
| CipsecSpdInfoFlags | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The direction, initiator and etc for an SA; see flag constants below: SP_FLAG_INUSE 0x00000001 SP_FLAG_DELETED 0x00000002 SP_FLAG_INBOUND 0x00000004 SP_FLAG_MIRRORED 0x00000008 SP_FLAG_PFP_LADDR 0x00000100 SP_FLAG_PFP_RADDR 0x00000200 SP_FLAG_PFP_LPORT 0x00000400 SP_FLAG_PFP_RPORT 0x00000800 SP_FLAG_PFP_ULP 0x00001000 SP_MASK_PFP 0x00001f00 SP_FLAG_DF 0x00002000 SP_FLAG_DF_BIT 0x00004000 SP_MASK_DF 0x00006000 SP_FLAG_DSCP 0x00008000 SP_FLAG_ECN 0x00010000 SP_FLAG_IP6 0x00000010 SP_FLAG_IP6_TUNNEL 0x00000020 SP_FLAG_INIT 0x00000040 | ||||
| CipsecSpdInfoULP | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The transport layer protocol for the SA. 0 = any. see protocol constants below: ICMP 1 IPv4 4 TCP 6 UDP 17 ESP 50 AH 51 IPv6 41 ICMPv6 58 | ||||
| CipsecSpdInfoAction | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The IPsec action for the SA.
| ||||
| CipsecSpdInfoDstAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.5 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The destination IP address for the SA. | ||||
| CipsecSpdInfoSrcAddr | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.6 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The source IP address for the SA. | ||||
| CipsecSpdInfoMode | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The mode for the SA.
| ||||
| CipsecSpdInfoSaSize | 1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The SA bundle size of an Security policy. | ||||
| TipsecSpdInfoSaTable | 1.3.6.1.4.1.20301.2.7.15.3.3.23.3 | NA | ||
table · not-accessible · current The (conceptual) table listing all information of the SA nested in an IPsec security policy. | ||||
| RipsecSpdInfoSaEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a SA information netsted in an IPsec security policy. | ||||
| CipsecSpdInfoSaIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index that enumerates the IPsec nested SAs . | ||||
| CipsecSpdInfoSaSecuProto | 1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The security protocol for the SA.
| ||||
| CipsecSpdInfoSaAuthAlg | 1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The hash algorithm used by the SA.
| ||||
| CipsecSpdInfoSaEncrAlg | 1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The encryption algorithm used by the SA.
| ||||
| CipsecSpdInfoSaEncrKeyLen | 1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The encryption key length of an nested SA. | ||||
| NdhcpsnpInfo | 1.3.6.1.4.1.20301.2.7.15.3.3.24 | |||
| TdhcpSnoopingBindingInfoTable | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1 | NA | ||
table · not-accessible · current DHCP Snooping binding Table. | ||||
| RdhcpSnoopingBindingInfoEntry | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1 | NA | ||
row · not-accessible · current A row in the DHCP Snooping binding Table | ||||
| CdhcpSnoopingBindingInfoIndex | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Index of this DHCP Snooping binding entry. | ||||
| CdhcpSnoopingBindingInfoMac | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.2 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Mac Address of this DHCP Snooping binding entry. | ||||
| CdhcpSnoopingBindingInfoIp | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current Ip Address of this DHCP Snooping binding entry. | ||||
| CdhcpSnoopingBindingInfoVLAN | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current VLAN ID of this DHCP Snooping binding entry. | ||||
| CdhcpSnoopingBindingInfoPort | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Port Number of this DHCP Snooping binding entry. | ||||
| CdhcpSnoopingBindingInfoExpiry | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The lease time of this DHCP Snooping binding entry. Set 0 to remove this entry | ||||
| CdhcpSnoopingBindingInfoType | 1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Show How this DHCP Snooping binding entry come from.
| ||||
| Nlayer3Oper | 1.3.6.1.4.1.20301.2.7.15.3.4 | |||
| NvrrpOper | 1.3.6.1.4.1.20301.2.7.15.3.4.1 | |||
| TvrrpOperVirtRtrTable | 1.3.6.1.4.1.20301.2.7.15.3.4.1.1 | NA | ||
table · not-accessible · current An entry in the table of virtual routers. | ||||
| RvrrpOperVirtRtrEntry | 1.3.6.1.4.1.20301.2.7.15.3.4.1.1.1 | NA | ||
| CvrrpOperVirtRtrIndex | 1.3.6.1.4.1.20301.2.7.15.3.4.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index for the VRRP virtual router. | ||||
| CvrrpOperVirtRtrBackup | 1.3.6.1.4.1.20301.2.7.15.3.4.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object is read.
| ||||
| SvrrpOperVirtRtrGroupBackup | 1.3.6.1.4.1.20301.2.7.15.3.4.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read.
| ||||
| Ntraps | 1.3.6.1.4.1.20301.2.7.15.7 | |||
| NibmSNMPv2Notifications | 1.3.6.1.4.1.20301.2.7.15.7.0 | |||
| !swPrimaryPowerSupplyFailure | 1.3.6.1.4.1.20301.2.7.15.7.0.1 | |||
notification A swPrimaryPowerSupplyFailure trap signifies that the primary power supply failed.
| ||||
| !swPrimaryPowerSupplyFailureNotify | 1.3.6.1.4.1.20301.2.7.15.7.0.1 | |||
notification · current A swPrimaryPowerSupplyFailure trap signifies that the primary power supply failed.
| ||||
| !swDefGwUp | 1.3.6.1.4.1.20301.2.7.15.7.0.2 | |||
notification A swDefGwUp trap signifies that the default gateway is alive. ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax. ipCurCfgGwAddr is the IP address of the default gateway. | ||||
| !swDefGwDown | 1.3.6.1.4.1.20301.2.7.15.7.0.3 | |||
notification A swDefGwDown trap signifies that the default gateway is down. ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax. ipCurCfgGwAddr is the IP address of the default gateway. | ||||
| !swDefGwInService | 1.3.6.1.4.1.20301.2.7.15.7.0.4 | |||
notification A swDefGwInService trap signifies that the default gateway is up and in service. ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax. ipCurCfgGwAddr is the IP address of the default gateway. | ||||
| !swDefGwNotInService | 1.3.6.1.4.1.20301.2.7.15.7.0.5 | |||
notification A swDefGwNotInService trap signifies that the default gateway is alive but not in service. ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax. ipCurCfgGwAddr is the IP address of the default gateway. | ||||
| !swVrrpNewMaster | 1.3.6.1.4.1.20301.2.7.15.7.0.16 | |||
notification The swVrrpNewMaster trap indicates that the sending agent has transitioned to 'Master' state. vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to vrrpVirtRtrTableMaxSize. vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address. | ||||
| !swVrrpNewBackup | 1.3.6.1.4.1.20301.2.7.15.7.0.17 | |||
notification The swVrrpNewBackup trap indicates that the sending agent has transitioned to 'Backup' state. vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to vrrpVirtRtrTableMaxSize. vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address. | ||||
| !swVrrpAuthFailure | 1.3.6.1.4.1.20301.2.7.15.7.0.18 | |||
notification A swVrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. Implementation of this trap is optional. vrrpCurCfgIfIndx is the VRRP interface index. This is equivalent to ifIndex in RFC 1213 mib. The range is from 1 to vrrpIfTableMaxSize. vrrpCurCfgIfPasswd is the password for authentication. It is a DisplayString of 0 to 7 characters. | ||||
| !swLoginFailure | 1.3.6.1.4.1.20301.2.7.15.7.0.19 | |||
notification A swLoginFailure trap signifies that someone failed to enter a valid username/password combination. swTrapDisplayString specifies whether the login attempt was from CONSOLE or TELNET. In case of TELNET login it also specifies the IP address of the host from which the attempt was made.
| ||||
| !swTempExceedThreshold | 1.3.6.1.4.1.20301.2.7.15.7.0.22 | |||
notification A swTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
| ||||
| !swFanFailure | 1.3.6.1.4.1.20301.2.7.15.7.0.24 | |||
notification A swFanFailure trap signifies that the fan failure has been detected.
| ||||
| !swValidLogin | 1.3.6.1.4.1.20301.2.7.15.7.0.25 | |||
notification A swValidLogin trap signifies that a user login has occured.
| ||||
| !swApplyComplete | 1.3.6.1.4.1.20301.2.7.15.7.0.27 | |||
notification A swApplyComplete signifies that new configuration has been applied.
| ||||
| !swSaveComplete | 1.3.6.1.4.1.20301.2.7.15.7.0.28 | |||
notification A swApplyComplete signifies that new configuration has been saved.
| ||||
| !swFwDownloadSucess | 1.3.6.1.4.1.20301.2.7.15.7.0.29 | |||
notification A swFwDownloadSuccess signifies that firmware has been downloaded to [image1|image2|boot image].
| ||||
| !swFwDownloadFailure | 1.3.6.1.4.1.20301.2.7.15.7.0.30 | |||
notification A swFwDownloadFailure signifies that firmware downloaded failed to [image1|image2|boot image].
| ||||
| !swTempReturnThreshold | 1.3.6.1.4.1.20301.2.7.15.7.0.31 | |||
notification A swTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
| ||||
| !swFanFailureFixed | 1.3.6.1.4.1.20301.2.7.15.7.0.33 | |||
notification A swFanFailureFixed trap signifies that the fan failure has been fixed.
| ||||
| !swStgNewRoot | 1.3.6.1.4.1.20301.2.7.15.7.0.42 | |||
notification A swStgNewRoot trap signifies that the bridge has become the new root of the STG. | ||||
| !swCistNewRoot | 1.3.6.1.4.1.20301.2.7.15.7.0.43 | |||
notification A swCistNewRoot trap signifies that the bridge has become the new root of the CIST.
| ||||
| !swStgTopologyChanged | 1.3.6.1.4.1.20301.2.7.15.7.0.44 | |||
notification A swStgTopologyChanged trap signifies that there was a STG topology change. | ||||
| !swCistTopologyChanged | 1.3.6.1.4.1.20301.2.7.15.7.0.45 | |||
notification A swCistTopologyChanged trap signifies that there was a CIST topology change.
| ||||
| !swHotlinksMasterUp | 1.3.6.1.4.1.20301.2.7.15.7.0.46 | |||
notification A swHotlinksMasterUp trap signifies that the Master interface is active.
| ||||
| !swHotlinksMasterDn | 1.3.6.1.4.1.20301.2.7.15.7.0.47 | |||
notification A swHotlinksMasterDn trap signifies that the Master interface is not active.
| ||||
| !swHotlinksBackupUp | 1.3.6.1.4.1.20301.2.7.15.7.0.48 | |||
notification A swHotlinksBackupUp trap signifies that the Backup interface is active.
| ||||
| !swHotlinksBackupDn | 1.3.6.1.4.1.20301.2.7.15.7.0.49 | |||
notification A swHotlinksBackupDn trap signifies that the Backup interface is not active.
| ||||
| !swHotlinksNone | 1.3.6.1.4.1.20301.2.7.15.7.0.50 | |||
notification A swHotlinksNone trap signifies that there are no active interfaces.
| ||||
| !swNTPSyncFailed | 1.3.6.1.4.1.20301.2.7.15.7.0.61 | |||
notification A swNTPSyncFailed trap signifies that sync with NTP server failed.
| ||||
| !swNTPUpdateClock | 1.3.6.1.4.1.20301.2.7.15.7.0.62 | |||
notification A swNTPUpdateClock trap signifies that update system clock with NTP server.
| ||||
| !swValidLogout | 1.3.6.1.4.1.20301.2.7.15.7.0.63 | |||
notification A swValidLogout trap signifies that a user logout has occured.
| ||||
| !swECMPGatewayUp | 1.3.6.1.4.1.20301.2.7.15.7.0.65 | |||
notification A swECMPGatewayUp trap signifies that the ECMP gateway is up.
| ||||
| !swECMPGatewayDown | 1.3.6.1.4.1.20301.2.7.15.7.0.66 | |||
notification A swECMPGatewayDown trap signifies that the ECMP gateway is down.
| ||||
| !swTeamingCtrlUp | 1.3.6.1.4.1.20301.2.7.15.7.0.67 | |||
notification A swTeamingCtrlUp trap signifies that the teaming is up.
| ||||
| !swTeamingCtrlDown | 1.3.6.1.4.1.20301.2.7.15.7.0.68 | |||
notification A swTeamingCtrlDown trap signifies that the teaming control is down.
| ||||
| !swTeamingCtrlDownTearDownBlked | 1.3.6.1.4.1.20301.2.7.15.7.0.69 | |||
notification A swTeamingCtrlDownTearDownBlked trap signifies that the teaming control is down but teardown is blocked.
| ||||
| !swTeamingCtrlError | 1.3.6.1.4.1.20301.2.7.15.7.0.70 | |||
notification A swTeamingCtrlError trap signifies error, action is undefined.
| ||||
| !swLACPPortBlocked | 1.3.6.1.4.1.20301.2.7.15.7.0.71 | |||
notification A swLACPPortBlocked trap signifies that LACP is operationally down on a port, and traffic is blocked on the port.
| ||||
| !swLACPPortUnblocked | 1.3.6.1.4.1.20301.2.7.15.7.0.72 | |||
notification A swLACPPortUnblocked trap signifies that LACP is operationally up on a port, and traffic is no longer blocked on the port.
| ||||
| !swVMGroupVMotion | 1.3.6.1.4.1.20301.2.7.15.7.0.77 | |||
notification A altVMGroupVMotion trap signifies that a virtual machine has moved from a port to another.
| ||||
| !swVMGroupVMOnline | 1.3.6.1.4.1.20301.2.7.15.7.0.78 | |||
notification A altVMGroupVMOnline trap signifies that a advance provisioned virtual machine has came online.
| ||||
| !swVMGroupVMVlanChange | 1.3.6.1.4.1.20301.2.7.15.7.0.79 | |||
notification A altVMGroupVMVlanChange trap signifies that a virtual machine has entered into a vlan, or changed the vlan.
| ||||
| !swPrimaryPowerSupplyFixed | 1.3.6.1.4.1.20301.2.7.15.7.0.97 | |||
notification A swPrimaryPowerSupplyFixed trap signifies that the primary power supply has been restored.
| ||||
| !swPrimaryPowerSupplyFixedNotify | 1.3.6.1.4.1.20301.2.7.15.7.0.97 | |||
notification · current A swPrimaryPowerSupplyFixed trap signifies that the primary power supply has been restored.
| ||||
| !swLFDPortErrdisabled | 1.3.6.1.4.1.20301.2.7.15.7.0.103 | |||
notification An swLFDPortErrdisabled trap signifies that a port is error-disabled due to excessive link flaps.
| ||||
| !swVlagInstanceUp | 1.3.6.1.4.1.20301.2.7.15.7.0.106 | |||
notification A swVlagInstanceUp trap signifies that vLAG instance is up identified in the trap message.
| ||||
| !swVlagInstanceRemoteUp | 1.3.6.1.4.1.20301.2.7.15.7.0.107 | |||
notification A swVlagInstanceRemoteUp trap signifies that vLAG is down but remote instance is Up.
| ||||
| !swVlagInstanceLocalUp | 1.3.6.1.4.1.20301.2.7.15.7.0.108 | |||
notification A swVlagInstanceLocalUp trap signifies that vLAG is down but local instance is Up.
| ||||
| !swVlagInstanceDown | 1.3.6.1.4.1.20301.2.7.15.7.0.109 | |||
notification A swVlagInstanceDown trap signifies that vLAG instance is down identified in the trap message.
| ||||
| !swVlagIslUp | 1.3.6.1.4.1.20301.2.7.15.7.0.110 | |||
notification A swVlagIslUp trap signifies that connection between vLAG switches is up.
| ||||
| !swVlagIslDown | 1.3.6.1.4.1.20301.2.7.15.7.0.111 | |||
notification A swVlagInstanceDown trap signifies that connection between vLAG switches is down.
| ||||
| !sw8021x | 1.3.6.1.4.1.20301.2.7.15.7.0.158 | |||
notification A sw8021x trap is sent when dot1x feature is enabled.
| ||||
| !swDefAdminDisable | 1.3.6.1.4.1.20301.2.7.15.7.0.162 | |||
notification A swDefAdminDisable trap signifies that default admin account has been disabled.
| ||||
| !swAcntStrngPswdNotMet | 1.3.6.1.4.1.20301.2.7.15.7.0.163 | |||
notification A swAcntStrngPswdNotMet trap signifies that configured password does not match strong password complexity.
| ||||
| !swAcntLocked | 1.3.6.1.4.1.20301.2.7.15.7.0.164 | |||
notification A swAcntLocked trap signifies that account has been locked.
| ||||
| !swAcntUnlocked | 1.3.6.1.4.1.20301.2.7.15.7.0.165 | |||
notification A swAcntUnlocked trap signifies that account has been unlocked.
| ||||
| !swFcZoneErr | 1.3.6.1.4.1.20301.2.7.15.7.0.169 | |||
notification This trap specifies the FC zoning configuration errors
| ||||
| SswTrapDisplayString | 1.3.6.1.4.1.20301.2.7.15.7.1000 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Temporary string object used to store information being sent in a Switch trap. | ||||
| Nqos | 1.3.6.1.4.1.20301.2.7.15.8 | |||
| NqosConfig | 1.3.6.1.4.1.20301.2.7.15.8.1 | |||
| Nqos8021p | 1.3.6.1.4.1.20301.2.7.15.8.1.1 | |||
| TqosCurCfgPortPriorityTable | 1.3.6.1.4.1.20301.2.7.15.8.1.1.1 | NA | ||
table · not-accessible · current The table of QOS Port Priority configuration. | ||||
| RqosCurCfgPortPriorityEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.1.1.1 | NA | ||
row · not-accessible · current Information about a particular QOS Port Priority configuration.
| ||||
| CqosCurCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.1.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current Switch Port Number | ||||
| CqosCurCfgPortPriority | 1.3.6.1.4.1.20301.2.7.15.8.1.1.1.1.2 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Switch Port Priority Should be between 0 and 7 | ||||
| TqosNewCfgPortPriorityTable | 1.3.6.1.4.1.20301.2.7.15.8.1.1.2 | NA | ||
table · not-accessible · current The table of QOS Port Priority configuration. | ||||
| RqosNewCfgPortPriorityEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.1.2.1 | NA | ||
row · not-accessible · current Information about a particular QOS Port Priority configuration.
| ||||
| CqosNewCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.1.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current Switch Port Number | ||||
| CqosNewCfgPortPriority | 1.3.6.1.4.1.20301.2.7.15.8.1.1.2.1.2 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Switch Port Priority Should be between 0 and 7 | ||||
| TqosCurCfgPriorityCoSTable | 1.3.6.1.4.1.20301.2.7.15.8.1.1.3 | NA | ||
table · not-accessible · current The table of Frame Priority and COSq configuration. | ||||
| RqosCurCfgPriorityCoSEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.1.3.1 | NA | ||
row · not-accessible · current Information about a particular Frame Priority and COSq configuration. | ||||
| CqosCurCfgPriorityIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.1.3.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Frame priority Number | ||||
| CqosCurCfgPriorityCoSq | 1.3.6.1.4.1.20301.2.7.15.8.1.1.3.1.2 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current CoSq for a Frame Priority Should be between 0 and 7 | ||||
| TqosNewCfgPriorityCoSTable | 1.3.6.1.4.1.20301.2.7.15.8.1.1.4 | NA | ||
table · not-accessible · current The table of Frame Priority and COSq configuration. | ||||
| RqosNewCfgPriorityCoSEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.1.4.1 | NA | ||
row · not-accessible · current Information about a particular Frame Priority and COSq configuration. | ||||
| CqosNewCfgPriorityIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.1.4.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Frame priority Number | ||||
| CqosNewCfgPriorityCoSq | 1.3.6.1.4.1.20301.2.7.15.8.1.1.4.1.2 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current CoSq for a Frame Priority Should be between 0 and 7 | ||||
| TqosCurCfgCosWeightTable | 1.3.6.1.4.1.20301.2.7.15.8.1.1.5 | NA | ||
table · not-accessible · current The table of CoSq and Weight configuration. | ||||
| RqosCurCfgCosWeightEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.1.5.1 | NA | ||
row · not-accessible · current Information about a particular CoSq and Weight configuration.
| ||||
| CqosCurCfgCosIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.1.5.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current CoSq Number | ||||
| CqosCurCfgCosWeight | 1.3.6.1.4.1.20301.2.7.15.8.1.1.5.1.2 | INTEGER (0..15) | RO | |
column · INTEGER (0..15) · read-only · current Weight of CoSq | ||||
| TqosNewCfgCosWeightTable | 1.3.6.1.4.1.20301.2.7.15.8.1.1.6 | NA | ||
table · not-accessible · current The table of CoSq and Weight configuration. | ||||
| RqosNewCfgCosWeightEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.1.6.1 | NA | ||
row · not-accessible · current Information about a particular CoSq and Weight configuration.
| ||||
| CqosNewCfgCosIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.1.6.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current CoSq Number | ||||
| CqosNewCfgCosWeight | 1.3.6.1.4.1.20301.2.7.15.8.1.1.6.1.2 | INTEGER (0..15) | RW | |
column · INTEGER (0..15) · read-write · current Weight of CoSq | ||||
| SqosCurCfgCosNum | 1.3.6.1.4.1.20301.2.7.15.8.1.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Number of CoSq.
| ||||
| SqosDefaultCfg | 1.3.6.1.4.1.20301.2.7.15.8.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Load default configuration.
| ||||
| Nqosdscp | 1.3.6.1.4.1.20301.2.7.15.8.1.2 | |||
| TqosCurCfgDscpTable | 1.3.6.1.4.1.20301.2.7.15.8.1.2.1 | NA | ||
table · not-accessible · current The table of Dscp to New Dscp/802.1p priority configuration. | ||||
| RqosCurCfgDscpEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.2.1.1 | NA | ||
row · not-accessible · current Information about a particular Dscp to New Dscp/802.1p priority configuration
| ||||
| CqosCurCfgDscpIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.2.1.1.1 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Dscp value | ||||
| CqosCurCfgMapDscp | 1.3.6.1.4.1.20301.2.7.15.8.1.2.1.1.2 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Map Dscp Value | ||||
| CqosCurCfgMap8021p | 1.3.6.1.4.1.20301.2.7.15.8.1.2.1.1.3 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Map 802.1p value | ||||
| TqosNewCfgDscpTable | 1.3.6.1.4.1.20301.2.7.15.8.1.2.2 | NA | ||
table · not-accessible · current The table of Dscp to New Dscp/802.1p priority configuration. | ||||
| RqosNewCfgDscpEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.2.2.1 | NA | ||
row · not-accessible · current Information about a particular Dscp to New Dscp/802.1p priority configuration
| ||||
| CqosNewCfgDscpIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.2.2.1.1 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Dscp value | ||||
| CqosNewCfgMapDscp | 1.3.6.1.4.1.20301.2.7.15.8.1.2.2.1.2 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Map Dscp Value | ||||
| CqosNewCfgMap8021p | 1.3.6.1.4.1.20301.2.7.15.8.1.2.2.1.3 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Map 802.1p value | ||||
| SqosCurCfgDscpState | 1.3.6.1.4.1.20301.2.7.15.8.1.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current This is for turning on/off DSCP globally.
| ||||
| SqosNewCfgDscpState | 1.3.6.1.4.1.20301.2.7.15.8.1.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is for turning on/off DSCP globally.
| ||||
| Nqoswredecn | 1.3.6.1.4.1.20301.2.7.15.8.1.3 | |||
| TqosCurCfgPortProfileTable | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1 | NA | ||
table · not-accessible · current The table of QOS port WRED ECN profile configuration. | ||||
| RqoSCurCfgPortProfileEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1 | NA | ||
row · not-accessible · current Information about a particular Transmit queue of a port WRED ECN profile configuration. | ||||
| CqosCurCfgProfilePortIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current Switch Port Number | ||||
| CqosCurCfgTrqIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.2 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Transmit Queue Number | ||||
| CqosCurCfgTrqNonTcpMin | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.3 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Port Transmit queue WRED ECN nontcp profile MinThreshold value. | ||||
| CqosCurCfgTrqNonTcpMax | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.4 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Port Transmit queue WRED ECN nontcp profile MaxThreshold value | ||||
| CqosCurCfgTrqNonTcpRate | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.5 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Port Transmit queue WRED ECN nontcp profile DropRate value. | ||||
| CqosCurCfgTrqTcpMin | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.6 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Port Transmit queue WRED ECN tcp profile MinThreshold value. | ||||
| CqosCurCfgTrqTcpMax | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.7 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Port Transmit queue WRED ECN tcp profile MaxThreshold value | ||||
| CqosCurCfgTrqTcpRate | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.8 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Port Transmit queue WRED ECN tcp profile DropRate value. | ||||
| CqosCurCfgPortTrqWredState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This is for turning on/off WRED per transmit queue per port.
| ||||
| TqosNewCfgPortProfileTable | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2 | NA | ||
table · not-accessible · current The table of QOS Port WRED ECN configuration. | ||||
| RqoSNewCfgPortProfileEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1 | NA | ||
row · not-accessible · current Information about a particular Transmit queue of a port WRED ECN configuration. | ||||
| CqosNewCfgProfilePortIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current Switch Port Number | ||||
| CqosNewCfgTrqIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.2 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Transmit Queue Number | ||||
| CqosNewCfgTrqNonTcpMin | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.3 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Port Transmit queue WRED ECN nontcp profile MinThreshold value. | ||||
| CqosNewCfgTrqNonTcpMax | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.4 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Port Transmit queue WRED ECN nontcp profile MaxThreshold value. | ||||
| CqosNewCfgTrqNonTcpRate | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.5 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Port Transmit queue WRED ECN nontcp profile DropRate value. | ||||
| CqosNewCfgTrqTcpMin | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.6 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Port Transmit queue WRED ECN tcp profile MinThreshold value. | ||||
| CqosNewCfgTrqTcpMax | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.7 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Port Transmit queue WRED ECN tcp profile MaxThreshold value. | ||||
| CqosNewCfgTrqTcpRate | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.8 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Port Transmit queue WRED ECN tcp profile DropRate value. | ||||
| CqosNewCfgPortTrqWredState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This is for turning on/off WRED per transmit queue per port.
| ||||
| TqosCurCfgPortStateTable | 1.3.6.1.4.1.20301.2.7.15.8.1.3.3 | NA | ||
table · not-accessible · current The table of QOS port WRED ECN state configuration. | ||||
| RqoSCurCfgPortStateEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.3.3.1 | NA | ||
row · not-accessible · current Information about a particular port WRED ECN state configuration. | ||||
| CqosCurCfgStatePortIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.3.3.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current Switch Port Number | ||||
| CqosCurCfgPortWredState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This is for turning on/off WRED per port.
| ||||
| CqosCurCfgPortEcnState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This is for turning on/off ECN per port.
| ||||
| TqosNewCfgPortStateTable | 1.3.6.1.4.1.20301.2.7.15.8.1.3.4 | NA | ||
table · not-accessible · current The table of QOS port WRED ECN state configuration. | ||||
| RqoSNewCfgPortStateEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.3.4.1 | NA | ||
row · not-accessible · current Information about a particular port WRED ECN state configuration. | ||||
| CqosNewCfgStatePortIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.3.4.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current Switch Port Number | ||||
| CqosNewCfgPortWredState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This is for turning on/off WRED per port
| ||||
| CqosNewCfgPortEcnState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This is for turning on/off ECN per port.
| ||||
| TqosCurCfgGlobalProfileTable | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5 | NA | ||
table · not-accessible · current The table of QOS global WRED ECN profile configuration. | ||||
| RqoSCurCfgGlobalProfileEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1 | NA | ||
row · not-accessible · current Information about a particular Transmit queue of global WRED ECN profile configuration. | ||||
| CqosCurCfgGlobalTrqIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Global Transmit Queue Number | ||||
| CqosCurCfgGlobalTrqNonTcpMin | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.2 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Global transmit queue WRED ECN nontcp profile MinThreshold value | ||||
| CqosCurCfgGlobalTrqNonTcpMax | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.3 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Global transmit queue WRED ECN nontcp profile MaxThreshold value | ||||
| CqosCurCfgGlobalTrqNonTcpRate | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.4 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Global transmit queue WRED ECN nontcp profile DropRate value | ||||
| CqosCurCfgGlobalTrqTcpMin | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.5 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Global transmit queue WRED ECN tcp profile MinThreshold value | ||||
| CqosCurCfgGlobalTrqTcpMax | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.6 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Global transmit queue WRED ECN tcp profile MaxThreshold value | ||||
| CqosCurCfgGlobalTrqTcpRate | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.7 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current Global transmit queue WRED ECN tcp profile DropRate value | ||||
| CqosCurCfgGlobalTrqWredState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This is for turning on/off WRED per global transmit queue
| ||||
| TqosNewCfgGlobalProfileTable | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6 | NA | ||
table · not-accessible · current The table of QOS global WRED ECN profile configuration. | ||||
| RqoSNewCfgGlobalProfileEntry | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1 | NA | ||
row · not-accessible · current Information about a particular Transmit queue of global WRED ECN profile configuration. | ||||
| CqosNewCfgGlobalTrqIndex | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Global Transmit Queue Number | ||||
| CqosNewCfgGlobalTrqNonTcpMin | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.2 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Global transmit queue WRED ECN nontcp profile MinThreshold value | ||||
| CqosNewCfgGlobalTrqNonTcpMax | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.3 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Global transmit queue WRED ECN nontcp profile MaxThreshold value | ||||
| CqosNewCfgGlobalTrqNonTcpRate | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.4 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Global transmit queue WRED ECN nontcp profile DropRate value | ||||
| CqosNewCfgGlobalTrqTcpMin | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.5 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Global transmit queue WRED ECN tcp profile MinThreshold value | ||||
| CqosNewCfgGlobalTrqTcpMax | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.6 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Global transmit queue WRED ECN tcp profile MaxThreshold value | ||||
| CqosNewCfgGlobalTrqTcpRate | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.7 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current Global transmit queue WRED ECN tcp profile DropRate value | ||||
| CqosNewCfgGlobalTrqWredState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This is for turning on/off WRED per global transmit queue
| ||||
| SqosCurCfgGlobalWredState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current This is for turning on/off WRED globally.
| ||||
| SqosCurCfgGlobalEcnState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current This is for turning on/off ECN globally.
| ||||
| SqosNewCfgGlobalWredState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is for turning on/off WRED globally.
| ||||
| SqosNewCfgGlobalEcnState | 1.3.6.1.4.1.20301.2.7.15.8.1.3.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is for turning on/off ECN globally.
| ||||
| Nacl | 1.3.6.1.4.1.20301.2.7.15.9 | |||
| NacConfig | 1.3.6.1.4.1.20301.2.7.15.9.1 | |||
| NacList | 1.3.6.1.4.1.20301.2.7.15.9.1.1 | |||
| TaclCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1 | NA | ||
table · not-accessible · current The table of current ACL configuration. | ||||
| RaclCurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1 | NA | ||
row · not-accessible · current Current information about a particular ACL configuration entry.
| ||||
| CaclCurCfgIndex | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL entry. | ||||
| CaclCurCfgGroup | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group. | ||||
| CaclCurCfgFilterAction | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The action to be performed on a packet that matches the filter settings of this ACL entry.
| ||||
| CaclCurCfgFilterActionSetPrio | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The value to be used when the action to be performed is setprio for this ACL entry.
| ||||
| CaclCurCfgEthFmt | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The packet ethernet format to be filtered.
| ||||
| CaclCurCfgTagFmt | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The packet tag format to be filtered.
| ||||
| CaclCurCfgIPFmt | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The packet IP format to be filtered.
| ||||
| CaclCurCfgSrcMACAddress | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.9 | MacAddress | RO | |
column · MacAddress · read-only · current The source MAC address to be filtered. | ||||
| CaclCurCfgSrcMACMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.10 | MacAddress | RO | |
column · MacAddress · read-only · current The address mask applied to aclCurCfgSrcMACAddress for filtering. | ||||
| CaclCurCfgDstMACAddress | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.11 | MacAddress | RO | |
column · MacAddress · read-only · current The destination MAC address to be filtered. | ||||
| CaclCurCfgDstMACMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.12 | MacAddress | RO | |
column · MacAddress · read-only · current The address mask applied to aclCurCfgDstMACAddress for filtering. | ||||
| CaclCurCfgEthernetTypeName | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered.
| ||||
| CaclCurCfgEthernetTypeValue | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.14 | INTEGER (1536..65535) | RO | |
column · INTEGER (1536..65535) · read-only · current The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object. | ||||
| CaclCurCfgVLanId | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.15 | INTEGER (0..4095) | RO | |
column · INTEGER (0..4095) · read-only · current The virtual LAN identifier to be filtered. | ||||
| CaclCurCfgVLanMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.16 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to aclCurCfgVLanId for filtering. | ||||
| CaclCurCfg8021pPriority | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current The 802.1p priority to be filtered.
| ||||
| CaclCurCfgTypeOfService | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.18 | DisplayString | RO | |
column · DisplayString · read-only · current The type of service to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| CaclCurCfgProtocol | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.19 | DisplayString | RO | |
column · DisplayString · read-only · current The protocol to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| CaclCurCfgSrcIPAddress | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.20 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address to be filtered. | ||||
| CaclCurCfgSrcIPMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.21 | IpAddress | RO | |
column · IpAddress · read-only · current The address mask applied to aclCurCfgSrcIPAddress for filtering. | ||||
| CaclCurCfgDstIPAddress | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.22 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address to be filtered. | ||||
| CaclCurCfgDstIPMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.23 | IpAddress | RO | |
column · IpAddress · read-only · current The address mask applied to aclCurCfgDstIPAddress for filtering. | ||||
| CaclCurCfgSrcPort | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.24 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The source TCP/UDP port number to be filtered. | ||||
| CaclCurCfgSrcPortMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.25 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to aclCurCfgSrcPort for filtering. | ||||
| CaclCurCfgDstPort | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.26 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The destination TCP/UDP port number to be filtered. | ||||
| CaclCurCfgDstPortMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.27 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to aclCurCfgDstPort for filtering. | ||||
| CaclCurCfgTCPFlags | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.28 | Bits | RO | |
column · Bits · read-only · current The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CaclCurCfgEgressPorts | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.29 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering. | ||||
| CaclCurCfgStatistics | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current Whether statistics collection for this ACL is enabled or not.
| ||||
| CaclCurCfgTCPFlagsMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.39 | Bits | RO | |
column · Bits · read-only · current The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CaclCurCfgMeterAction | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.41 | INTEGER | RO | |
column · INTEGER · read-only · current Meter Action for this ACL.
| ||||
| CaclCurCfgMeterEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.42 | INTEGER | RO | |
column · INTEGER · read-only · current Meter state for this ACL.
| ||||
| CaclCurCfgKbitsSec | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.43 | Unsigned32 (64..40000000) | RO | |
column · Unsigned32 (64..40000000) · read-only · current The commited rate of meter associated with this ACL entry. | ||||
| CaclCurCfgKbitsBurst | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.44 | INTEGER | RO | |
column · INTEGER · read-only · current The maxmium burst sizeof meter associated with this ACL entry.
| ||||
| CaclCurCfgUser | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.45 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Set user defined priority for this ACL. | ||||
| CaclCurCfgInprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.46 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Set in profile pkts DSCP value. | ||||
| CaclCurCfgTos | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.47 | INTEGER | RO | |
column · INTEGER · read-only · current To enable/disable setting pkts based on TOS bits.
| ||||
| CaclCurCfgOutprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.48 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Set out profile pkts DSCP value. | ||||
| CaclCurCfgUserEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.49 | INTEGER | RO | |
column · INTEGER · read-only · current Set update method for this ACL.
| ||||
| CaclCurCfgInprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.50 | INTEGER | RO | |
column · INTEGER · read-only · current Whether in profile update DSCP for this ACL is enabled or not.
| ||||
| CaclCurCfgOutprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.51 | INTEGER | RO | |
column · INTEGER · read-only · current Whether out profile update DSCP for this ACL is enabled or not.
| ||||
| CaclCurCfgMirrorPort | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.74 | Integer32 | RO | |
column · Integer32 · read-only · current Set port in the ACL for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring. | ||||
| CaclCurCfgLog | 1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.81 | INTEGER | RO | |
column · INTEGER · read-only · current Whether log for this ACL is enabled or not.
| ||||
| TaclNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2 | NA | ||
table · not-accessible · current The table of new ACL configuration. | ||||
| RaclNewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1 | NA | ||
row · not-accessible · current New information about a particular ACL configuration.
| ||||
| CaclNewCfgIndex | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL entry. | ||||
| CaclNewCfgGroup | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group. | ||||
| CaclNewCfgFilterAction | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The action to be performed on a packet that matches the filter settings of this ACL entry.
| ||||
| CaclNewCfgFilterActionSetPrio | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The COS queue to be used when the action for this ACL entry is set to setprio.
| ||||
| CaclNewCfgEthFmt | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The packet ethernet format to be filtered.
| ||||
| CaclNewCfgTagFmt | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The packet tagging format to be filtered.
| ||||
| CaclNewCfgIPFmt | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The packet IP format to be filtered.
| ||||
| CaclNewCfgSrcMACAddress | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.9 | MacAddress | RW | |
column · MacAddress · read-write · current The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff:ff. | ||||
| CaclNewCfgSrcMACMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.10 | MacAddress | RW | |
column · MacAddress · read-write · current The address mask to be applied to aclNewCfgSrcMACAddress for filtering. | ||||
| CaclNewCfgDstMACAddress | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.11 | MacAddress | RW | |
column · MacAddress · read-write · current The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff:ff. | ||||
| CaclNewCfgDstMACMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.12 | MacAddress | RW | |
column · MacAddress · read-write · current The address mask to be applied to aclNewCfgDstMACAddress for filtering. | ||||
| CaclNewCfgEthernetTypeName | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)
| ||||
| CaclNewCfgEthernetTypeValue | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.14 | INTEGER (1536..65535) | RW | |
column · INTEGER (1536..65535) · read-write · current The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object. | ||||
| CaclNewCfgVLanId | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.15 | INTEGER (0..4095) | RW | |
column · INTEGER (0..4095) · read-write · current The virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically set to 4095 (0xfff). When this object is set to 0, the Vlan ACL filter is disabled. | ||||
| CaclNewCfgVLanMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.16 | DisplayString | RW | |
column · DisplayString · read-write · current The mask to be applied to aclNewCfgVLanId for filtering. | ||||
| CaclNewCfg8021pPriority | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current The 802.1p priority to be filtered.
| ||||
| CaclNewCfgTypeOfService | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.18 | DisplayString | RW | |
column · DisplayString · read-write · current The type of service to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| CaclNewCfgProtocol | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.19 | DisplayString | RW | |
column · DisplayString · read-write · current The protocol to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| CaclNewCfgSrcIPAddress | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.20 | IpAddress | RW | |
column · IpAddress · read-write · current The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set to 255.255.255.255. | ||||
| CaclNewCfgSrcIPMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.21 | IpAddress | RW | |
column · IpAddress · read-write · current The address mask to be applied to aclNewCfgSrcIPAddress for filtering. | ||||
| CaclNewCfgDstIPAddress | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.22 | IpAddress | RW | |
column · IpAddress · read-write · current The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically set to 255.255.255.255. | ||||
| CaclNewCfgDstIPMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.23 | IpAddress | RW | |
column · IpAddress · read-write · current The address mask to be applied to aclNewCfgDstIPAddress for filtering. | ||||
| CaclNewCfgSrcPort | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.24 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0xffff). | ||||
| CaclNewCfgSrcPortMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.25 | DisplayString | RW | |
column · DisplayString · read-write · current The mask to be applied to aclNewCfgSrcPort for filtering. | ||||
| CaclNewCfgDstPort | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.26 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff). | ||||
| CaclNewCfgDstPortMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.27 | DisplayString | RW | |
column · DisplayString · read-write · current The mask to be applied to aclNewCfgDstPort for filtering. | ||||
| CaclNewCfgTCPFlags | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.28 | Bits | RW | |
column · Bits · read-write · current The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CaclNewCfgEgressPorts | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.29 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering. | ||||
| CaclNewCfgStatistics | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current Whether statistics collection for this ACL is enabled or not.
| ||||
| CaclNewCfgAddEgressPort | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.31 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read. | ||||
| CaclNewCfgRemoveEgressPort | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.32 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be removed from the specified ACL. A value of zero is always returned when this object is read. | ||||
| CaclNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.33 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgTCPFlagsMask | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.39 | Bits | RW | |
column · Bits · read-write · current The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Default value is 0x3f.
| ||||
| CaclNewCfgMeterAction | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current Meter Action for this ACL.
| ||||
| CaclNewCfgMeterEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.42 | INTEGER | RW | |
column · INTEGER · read-write · current Meter state for this ACL.
| ||||
| CaclNewCfgKbitsSec | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.43 | Unsigned32 (64..40000000) | RW | |
column · Unsigned32 (64..40000000) · read-write · current The commited rate of meter associated with this ACL entry. | ||||
| CaclNewCfgKbitsBurst | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.44 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum burst size of the meter associated with this ACL entry.
| ||||
| CaclNewCfgUser | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.45 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Set user defined priority for this ACL. | ||||
| CaclNewCfgInprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.46 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Set in profile pkts DSCP value. | ||||
| CaclNewCfgTos | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.47 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable setting pkts based on TOS bits.
| ||||
| CaclNewCfgOutprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.48 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Set out profile pkts DSCP value. | ||||
| CaclNewCfgUserEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.49 | INTEGER | RW | |
column · INTEGER · read-write · current Set update method for this ACL.
| ||||
| CaclNewCfgInprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.50 | INTEGER | RW | |
column · INTEGER · read-write · current Whether in profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for this ACL. The value enable(1) is automatically set when setting a value for aclNewCfgInprofDscp object.
| ||||
| CaclNewCfgOutprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.51 | INTEGER | RW | |
column · INTEGER · read-write · current Whether out profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the out profile update DSCP to be disabled for this ACL. The value enable(1) is automatically set when setting a value for aclNewCfgOutprofDscp object.
| ||||
| CaclNewCfgReset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.52 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgEthernetReset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.53 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Ethernet entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgIpv4Reset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.54 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgTcpudpReset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.55 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Tcpudp entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgMeterReset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.56 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Meter entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgRemarkReset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.57 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Remark entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgRemarkInprofReset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.58 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgRemarkOutprofReset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.59 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgPktfmtReset | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.60 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Pktfmt entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgMirrorPort | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.74 | Integer32 | RW | |
column · Integer32 · read-write · current Set port in the ACL for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring. | ||||
| CaclNewCfgLog | 1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.81 | INTEGER | RW | |
column · INTEGER · read-write · current Whether log for this ACL is enabled or not.
| ||||
| SaclTableMaxSize | 1.3.6.1.4.1.20301.2.7.15.9.1.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in the acl config tables. | ||||
| NaclGroup | 1.3.6.1.4.1.20301.2.7.15.9.1.3 | |||
| TaclGroupCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.9.1.3.1 | NA | ||
table · not-accessible · current The table of current ACL Group configuration. | ||||
| RaclGroupCurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.9.1.3.1.1 | NA | ||
row · not-accessible · current Information about a particular ACL configuration.
| ||||
| CaclGroupCurCfgIndex | 1.3.6.1.4.1.20301.2.7.15.9.1.3.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL Group entry. | ||||
| CaclGroupCurCfgMemberAcls | 1.3.6.1.4.1.20301.2.7.15.9.1.3.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group. | ||||
| CaclGroupCurCfgMemberAcl6s | 1.3.6.1.4.1.20301.2.7.15.9.1.3.1.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ACL6 members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL6 9 || || || ||___ ACL6 8 || |____ ACL6 7 || . . . ||_________ ACL6 2 |__________ ACL6 1 where x: 1 - the represented ACL6 is a member of the group. 0 - the represented ACL6 is not a member of the group. | ||||
| TaclGroupNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2 | NA | ||
table · not-accessible · current The table of new ACL Group configuration. | ||||
| RaclGroupNewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1 | NA | ||
row · not-accessible · current New information about a particular ACL configuration.
| ||||
| CaclGroupNewCfgIndex | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL Group entry. | ||||
| CaclGroupNewCfgMemberAcls | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group. | ||||
| CaclGroupNewCfgAddAcl | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read. | ||||
| CaclGroupNewCfgRemoveAcl | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read. | ||||
| CaclGroupNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to delete an ACL group. A value of other(1) is always returned when this object is read.
| ||||
| CaclGroupNewCfgMemberAcl6s | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ACL6 members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL6 9 || || || ||___ ACL6 8 || |____ ACL6 7 || . . . ||_________ ACL6 2 |__________ ACL6 1 where x: 1 - the represented ACL6 is a member of the group. 0 - the represented ACL6 is not a member of the group. | ||||
| CaclGroupNewCfgAddAcl6 | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.10 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The index of the ACL6 entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL6 entry in the aclGroupNewCfgMemberAcl6s bitmap. A value of zero is always returned when this object is read. | ||||
| CaclGroupNewCfgRemoveAcl6 | 1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.11 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read. | ||||
| NaclCfg | 1.3.6.1.4.1.20301.2.7.15.9.1.4 | |||
| TaclCurCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.9.1.4.1 | NA | ||
table · not-accessible · current The table of port acl groups configuration. | ||||
| RaclCurCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1 | NA | ||
row · not-accessible · current Information about a particular port acl configuration.
| ||||
| CaclCurCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB. | ||||
| CaclCurCfgPortAclBmap | 1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1.2 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port. | ||||
| CaclCurCfgPortAclGrpBmap | 1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1.4 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port. | ||||
| CaclCurCfgPortAcl6Bmap | 1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1.13 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl6 9
|| ||
|| ||___ acl6 8
|| |____ acl6 7
|| . . .
||_________ acl6 2
|__________ acl6 1
where x : 1 - The represented acl6 applied to the port.
0 - The represented acl6 not applied to the port. | ||||
| TaclNewCfgPortTable | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2 | NA | ||
table · not-accessible · current The table of port acl configuration. | ||||
| RaclNewCfgPortTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1 | NA | ||
row · not-accessible · current Information about a particular port acl groups configuration.
| ||||
| CaclNewCfgPortIndex | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB. | ||||
| CaclNewCfgPortAddAcl | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl to be added to the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortAddAclGrp | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl group to be added to the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortRemoveAcl | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl to be removed from the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortRemoveAclGrp | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl group to be removed from the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortAclBmap | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.8 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port. | ||||
| CaclNewCfgPortAclGrpBmap | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.10 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl group applied to the port.
0 - The represented acl group not applied to the port. | ||||
| CaclNewCfgPortAddAcl6 | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.11 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl6 to be added to the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortRemoveAcl6 | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.12 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl6 to be removed from the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortAcl6Bmap | 1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.13 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acl6s applied to the port. The acl6s are presented in bitmap format. This string displays acl number from 1 to 128. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ acl6 9 || || || ||___ acl6 8 || |____ acl6 7 || . . . ||_________ acl6 2 |__________ acl6 1 where x : 1 - The represented acl6 applied to the port. 0 - The represented acl6 not applied to the port. | ||||
| Nacl6List | 1.3.6.1.4.1.20301.2.7.15.9.1.5 | |||
| Tacl6CurCfgTable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1 | NA | ||
table · not-accessible · current The table of current ACL6 configuration. | ||||
| Racl6CurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1 | NA | ||
row · not-accessible · current Current information about a particular ACL6 configuration entry.
| ||||
| Cacl6CurCfgIndex | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL6 entry. | ||||
| Cacl6CurCfgGroup | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the ACL group to which this ACL6 entry is a member of. A value of zero means the ACL6 is not a member of any group. | ||||
| Cacl6CurCfgFilterAction | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The action to be performed on a packet that matches the filter settings of this ACL6 entry.
| ||||
| Cacl6CurCfgSrcIPv6Address | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.5 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current The source IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| Cacl6CurCfgSrcIPv6PrefixLen | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.6 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering. | ||||
| Cacl6CurCfgDstIPv6Address | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.7 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current The destination IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| Cacl6CurCfgDstIPv6PrefixLen | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.8 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering. | ||||
| Cacl6CurCfgIPv6FlowLabel | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 FlowLabel to be filtered. 'none' for not initialised, within the range 0-1048575 | ||||
| Cacl6CurCfgIPv6TrafficClass | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 Traffic Class to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| Cacl6CurCfgIPv6NextHeader | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current The IPv6 next header to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| Cacl6CurCfgSrcPort | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.12 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The source TCP/UDP port number to be filtered. | ||||
| Cacl6CurCfgSrcPortMask | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to acl6CurCfgSrcPort for filtering. | ||||
| Cacl6CurCfgDstPort | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.14 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The destination TCP/UDP port number to be filtered. | ||||
| Cacl6CurCfgDstPortMask | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.15 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to acl6CurCfgDstPort for filtering. | ||||
| Cacl6CurCfgTCPFlags | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.16 | Bits | RO | |
column · Bits · read-only · current The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| Cacl6CurCfgTCPFlagsMask | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.17 | Bits | RO | |
column · Bits · read-only · current The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| Cacl6CurCfgEgressPorts | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.18 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the ACL6 configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering. | ||||
| Cacl6CurCfgStatistics | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current Whether statistics collection for this ACL6 is enabled or not.
| ||||
| Cacl6CurCfgUser | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.20 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Set user defined priority for this ACL6. | ||||
| Cacl6CurCfgInprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.21 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Set in profile pkts DSCP value. | ||||
| Cacl6CurCfgTos | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current To enable/disable setting pkts based on TOS bits.
| ||||
| Cacl6CurCfgUserEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Set update method for this ACL6.
| ||||
| Cacl6CurCfgInprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current Whether in profile update DSCP for this ACL6 is enabled or not.
| ||||
| Cacl6CurCfgLog | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current Whether log for this ACL is enabled or not.
| ||||
| Cacl6CurCfgMeterAction | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current Meter Action for this ACL.
| ||||
| Cacl6CurCfgMeterEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current Meter state for this ACL.
| ||||
| Cacl6CurCfgKbitsSec | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.30 | Unsigned32 (64..40000000) | RO | |
column · Unsigned32 (64..40000000) · read-only · current The commited rate of meter associated with this ACL entry. | ||||
| Cacl6CurCfgKbitsBurst | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current The maxmium burst sizeof meter associated with this ACL entry.
| ||||
| Cacl6CurCfgOutprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.32 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Set out profile pkts DSCP value. | ||||
| Cacl6CurCfgOutprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current Whether out profile update DSCP for this ACL is enabled or not.
| ||||
| Tacl6NewCfgTable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2 | NA | ||
table · not-accessible · current The table of new ACL6 configuration. | ||||
| Racl6NewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1 | NA | ||
row · not-accessible · current New information about a particular ACL6 configuration.
| ||||
| Cacl6NewCfgIndex | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL6 entry. | ||||
| Cacl6NewCfgGroup | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the ACL group to which this ACL6 entry is a member of. A value of zero means the ACL6 is not a member of any group. | ||||
| Cacl6NewCfgFilterAction | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The action to be performed on a packet that matches the filter settings of this ACL6 entry.
| ||||
| Cacl6NewCfgSrcIPv6Address | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.5 | DisplayString (SIZE (0..40)) | RW | |
column · DisplayString (SIZE (0..40)) · read-write · current The source IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| Cacl6NewCfgSrcIPv6PrefixLen | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.6 | INTEGER (1..128) | RW | |
column · INTEGER (1..128) · read-write · current The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering. | ||||
| Cacl6NewCfgDstIPv6Address | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.7 | DisplayString (SIZE (0..40)) | RW | |
column · DisplayString (SIZE (0..40)) · read-write · current The destination IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx | ||||
| Cacl6NewCfgDstIPv6PrefixLen | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.8 | INTEGER (1..128) | RW | |
column · INTEGER (1..128) · read-write · current The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering. | ||||
| Cacl6NewCfgIPv6FlowLabel | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.9 | DisplayString | RW | |
column · DisplayString · read-write · current The IPv6 flow label to be filtered. 'none' for not initialised, within the range 0-1048575 | ||||
| Cacl6NewCfgIPv6TrafficClass | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.10 | DisplayString | RW | |
column · DisplayString · read-write · current The IPv6 traffic class to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| Cacl6NewCfgIPv6NextHeader | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.11 | DisplayString | RW | |
column · DisplayString · read-write · current The IPv6 next header to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| Cacl6NewCfgSrcPort | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.12 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The source TCP/UDP port number to be filtered. | ||||
| Cacl6NewCfgSrcPortMask | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.13 | DisplayString | RW | |
column · DisplayString · read-write · current The mask applied to acl6CurCfgSrcPort for filtering. | ||||
| Cacl6NewCfgDstPort | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.14 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The destination TCP/UDP port number to be filtered. | ||||
| Cacl6NewCfgDstPortMask | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.15 | DisplayString | RW | |
column · DisplayString · read-write · current The mask applied to acl6CurCfgDstPort for filtering. | ||||
| Cacl6NewCfgTCPFlags | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.16 | Bits | RW | |
column · Bits · read-write · current The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| Cacl6NewCfgTCPFlagsMask | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.17 | Bits | RW | |
column · Bits · read-write · current The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| Cacl6NewCfgEgressPorts | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.18 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the ACL6 configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering. | ||||
| Cacl6NewCfgStatistics | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Whether statistics collection for this ACL6 is enabled or not.
| ||||
| Cacl6NewCfgAddEgressPort | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.20 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be added to the specified ACL6 for egress filtering. A value of zero is always returned when this object is read. | ||||
| Cacl6NewCfgRemoveEgressPort | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.21 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be removed from the specified ACL6. A value of zero is always returned when this object is read. | ||||
| Cacl6NewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to delete an ACL6 entry. A value of other(1) is always returned when this object is read.
| ||||
| Cacl6NewCfgUser | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.23 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Set user defined priority for this ACL6. | ||||
| Cacl6NewCfgInprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.24 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Set in profile pkts DSCP value. | ||||
| Cacl6NewCfgTos | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable setting pkts based on TOS bits.
| ||||
| Cacl6NewCfgUserEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current Set update method for this ACL6.
| ||||
| Cacl6NewCfgInprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.28 | INTEGER | RW | |
column · INTEGER · read-write · current Whether in profile update DSCP for this ACL6 is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for this ACL6. The value enable(1) is automatically set when setting a value for aclNewCfgInprofDscp object.
| ||||
| Cacl6NewCfgIPv6Reset | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL IPV6 entry. A value of other(1) is always returned when this object is read.
| ||||
| Cacl6NewCfgTcpudpReset | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.31 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL6 Tcpudp entry. A value of other(1) is always returned when this object is read.
| ||||
| Cacl6NewCfgRemarkInprofReset | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.32 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read.
| ||||
| Cacl6NewCfgLog | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.33 | INTEGER | RW | |
column · INTEGER · read-write · current Whether log for this ACL is enabled or not.
| ||||
| Cacl6NewCfgMeterAction | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.35 | INTEGER | RW | |
column · INTEGER · read-write · current Meter Action for this ACL.
| ||||
| Cacl6NewCfgMeterEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.36 | INTEGER | RW | |
column · INTEGER · read-write · current Meter state for this ACL.
| ||||
| Cacl6NewCfgKbitsSec | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.37 | Unsigned32 (64..40000000) | RW | |
column · Unsigned32 (64..40000000) · read-write · current The commited rate of meter associated with this ACL entry. | ||||
| Cacl6NewCfgKbitsBurst | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.38 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum burst size of the meter associated with this ACL entry.
| ||||
| Cacl6NewCfgMeterReset | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.39 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL6 Meter entry. A value of other(1) is always returned when this object is read.
| ||||
| Cacl6NewCfgOutprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.40 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Set out profile pkts DSCP value. | ||||
| Cacl6NewCfgOutprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current Whether out profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the out profile update DSCP to be disabled for this ACL. The value enable(1) is automatically set when setting a value for aclNewCfgOutprofDscp object.
| ||||
| Cacl6NewCfgRemarkOutprofReset | 1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.42 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read.
| ||||
| Sacl6TableMaxSize | 1.3.6.1.4.1.20301.2.7.15.9.1.5.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in the acl6 config tables. | ||||
| NaclLog | 1.3.6.1.4.1.20301.2.7.15.9.1.6 | |||
| SaclLogCurInterval | 1.3.6.1.4.1.20301.2.7.15.9.1.6.1 | INTEGER (5..600) | RO | |
scalar · INTEGER (5..600) · read-only · current The interval secends of displaying Logs. Default is 300s. | ||||
| SaclLogNewInterval | 1.3.6.1.4.1.20301.2.7.15.9.1.6.2 | INTEGER (5..600) | RW | |
scalar · INTEGER (5..600) · read-write · current The interval secends of displaying Logs. Default is 300s. | ||||
| SaclLogCurRateLimit | 1.3.6.1.4.1.20301.2.7.15.9.1.6.3 | INTEGER (1..1000) | RO | |
scalar · INTEGER (1..1000) · read-only · current The rate limit of ACL Log queue. Default is 10pps. | ||||
| SaclLogNewRateLimit | 1.3.6.1.4.1.20301.2.7.15.9.1.6.4 | INTEGER (1..1000) | RW | |
scalar · INTEGER (1..1000) · read-write · current The rate limit of ACL Log queue. Default is 10pps. | ||||
| NvmapConfig | 1.3.6.1.4.1.20301.2.7.15.9.3 | |||
| NvmapList | 1.3.6.1.4.1.20301.2.7.15.9.3.1 | |||
| TvmapCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1 | NA | ||
table · not-accessible · current The table of current VMAP configuration. | ||||
| RvmapCurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1 | NA | ||
row · not-accessible · current Current information about a particular VMAP configuration entry.
| ||||
| CvmapCurCfgIndex | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this VMAP entry. | ||||
| CvmapCurCfgFilterAction | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The action to be performed on a packet that matches the filter settings of this VMAP entry.
| ||||
| CvmapCurCfgFilterActionSetPrio | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The value to be used when the action to be performed is setprio for this VMAP entry.
| ||||
| CvmapCurCfgEthFmt | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The packet ethernet format to be filtered.
| ||||
| CvmapCurCfgTagFmt | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The packet tag format to be filtered.
| ||||
| CvmapCurCfgIPFmt | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The packet IP format to be filtered.
| ||||
| CvmapCurCfgSrcMACAddress | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.7 | MacAddress | RO | |
column · MacAddress · read-only · current The source MAC address to be filtered. | ||||
| CvmapCurCfgSrcMACMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.8 | MacAddress | RO | |
column · MacAddress · read-only · current The address mask applied to aclCurCfgSrcMACAddress for filtering. | ||||
| CvmapCurCfgDstMACAddress | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.9 | MacAddress | RO | |
column · MacAddress · read-only · current The destination MAC address to be filtered. | ||||
| CvmapCurCfgDstMACMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.10 | MacAddress | RO | |
column · MacAddress · read-only · current The address mask applied to aclCurCfgDstMACAddress for filtering. | ||||
| CvmapCurCfgEthernetTypeName | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered.
| ||||
| CvmapCurCfgEthernetTypeValue | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.12 | INTEGER (1536..65535) | RO | |
column · INTEGER (1536..65535) · read-only · current The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object. | ||||
| CvmapCurCfg8021pPriority | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The 802.1p priority to be filtered.
| ||||
| CvmapCurCfgTypeOfService | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current The type of service to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| CvmapCurCfgProtocol | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.15 | DisplayString | RO | |
column · DisplayString · read-only · current The protocol to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| CvmapCurCfgSrcIPAddress | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.16 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address to be filtered. | ||||
| CvmapCurCfgSrcIPMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.17 | IpAddress | RO | |
column · IpAddress · read-only · current The address mask applied to aclCurCfgSrcIPAddress for filtering. | ||||
| CvmapCurCfgDstIPAddress | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.18 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address to be filtered. | ||||
| CvmapCurCfgDstIPMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.19 | IpAddress | RO | |
column · IpAddress · read-only · current The address mask applied to aclCurCfgDstIPAddress for filtering. | ||||
| CvmapCurCfgSrcPort | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.20 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The source TCP/UDP port number to be filtered. | ||||
| CvmapCurCfgSrcPortMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.21 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to aclCurCfgSrcPort for filtering. | ||||
| CvmapCurCfgDstPort | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.22 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The destination TCP/UDP port number to be filtered. | ||||
| CvmapCurCfgDstPortMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.23 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to aclCurCfgDstPort for filtering. | ||||
| CvmapCurCfgTCPFlags | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.24 | Bits | RO | |
column · Bits · read-only · current The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CvmapCurCfgTCPFlagsMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.25 | Bits | RO | |
column · Bits · read-only · current The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CvmapCurCfgEgressPorts | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.26 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the VMAP configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering. | ||||
| CvmapCurCfgStatistics | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current Whether statistics collection for this VMAP is enabled or not.
| ||||
| CvmapCurCfgMeterAction | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current Meter Action for this VMAP.
| ||||
| CvmapCurCfgMeterEnable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.32 | INTEGER | RO | |
column · INTEGER · read-only · current Meter state for this VMAP.
| ||||
| CvmapCurCfgKbitsSec | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.33 | Unsigned32 (64..10000000) | RO | |
column · Unsigned32 (64..10000000) · read-only · current The commited rate of meter associated with this VMAP entry. | ||||
| CvmapCurCfgKbitsBurst | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current The maxmium burst sizeof meter associated with this VMAP entry.
| ||||
| CvmapCurCfgUser | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.35 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Set user defined priority for this VMAP. | ||||
| CvmapCurCfgInprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.36 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Set in profile pkts DSCP value. | ||||
| CvmapCurCfgTos | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.37 | INTEGER | RO | |
column · INTEGER · read-only · current To enable/disable setting pkts based on TOS bits.
| ||||
| CvmapCurCfgOutprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.38 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Set out profile pkts DSCP value. | ||||
| CvmapCurCfgUserEnable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.39 | INTEGER | RO | |
column · INTEGER · read-only · current Set update method for this VMAP.
| ||||
| CvmapCurCfgInprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.40 | INTEGER | RO | |
column · INTEGER · read-only · current Whether in profile update DSCP for this VMAP is enabled or not.
| ||||
| CvmapCurCfgOutprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.41 | INTEGER | RO | |
column · INTEGER · read-only · current Whether out profile update DSCP for this VMAP is enabled or not.
| ||||
| CvmapCurCfgMirrorPort | 1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.51 | Integer32 | RO | |
column · Integer32 · read-only · current Set port in the VMAP for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring. | ||||
| TvmapNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2 | NA | ||
table · not-accessible · current The table of new VMAP configuration. | ||||
| RvmapNewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1 | NA | ||
row · not-accessible · current New information about a particular VMAP configuration.
| ||||
| CvmapNewCfgIndex | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this VMAP entry. | ||||
| CvmapNewCfgFilterAction | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The action to be performed on a packet that matches the filter settings of this VMAP entry.
| ||||
| CvmapNewCfgFilterActionSetPrio | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The COS queue to be used when the action for this VMAP entry is set to setprio.
| ||||
| CvmapNewCfgEthFmt | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The packet ethernet format to be filtered.
| ||||
| CvmapNewCfgTagFmt | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The packet tagging format to be filtered.
| ||||
| CvmapNewCfgIPFmt | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The packet IP format to be filtered.
| ||||
| CvmapNewCfgSrcMACAddress | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.7 | MacAddress | RW | |
column · MacAddress · read-write · current The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff:ff. | ||||
| CvmapNewCfgSrcMACMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.8 | MacAddress | RW | |
column · MacAddress · read-write · current The address mask to be applied to aclNewCfgSrcMACAddress for filtering. | ||||
| CvmapNewCfgDstMACAddress | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.9 | MacAddress | RW | |
column · MacAddress · read-write · current The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff:ff. | ||||
| CvmapNewCfgDstMACMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.10 | MacAddress | RW | |
column · MacAddress · read-write · current The address mask to be applied to aclNewCfgDstMACAddress for filtering. | ||||
| CvmapNewCfgEthernetTypeName | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)
| ||||
| CvmapNewCfgEthernetTypeValue | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.12 | INTEGER (1536..65535) | RW | |
column · INTEGER (1536..65535) · read-write · current The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object. | ||||
| CvmapNewCfg8021pPriority | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The 802.1p priority to be filtered.
| ||||
| CvmapNewCfgTypeOfService | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.14 | DisplayString | RW | |
column · DisplayString · read-write · current The type of service to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| CvmapNewCfgProtocol | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.15 | DisplayString | RW | |
column · DisplayString · read-write · current The protocol to be filtered. 'none' for not initialised, within the range 0-255 | ||||
| CvmapNewCfgSrcIPAddress | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.16 | IpAddress | RW | |
column · IpAddress · read-write · current The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set to 255.255.255.255. | ||||
| CvmapNewCfgSrcIPMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.17 | IpAddress | RW | |
column · IpAddress · read-write · current The address mask to be applied to aclNewCfgSrcIPAddress for filtering. | ||||
| CvmapNewCfgDstIPAddress | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.18 | IpAddress | RW | |
column · IpAddress · read-write · current The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically set to 255.255.255.255. | ||||
| CvmapNewCfgDstIPMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.19 | IpAddress | RW | |
column · IpAddress · read-write · current The address mask to be applied to aclNewCfgDstIPAddress for filtering. | ||||
| CvmapNewCfgSrcPort | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.20 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0xffff). | ||||
| CvmapNewCfgSrcPortMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.21 | DisplayString | RW | |
column · DisplayString · read-write · current The mask to be applied to aclNewCfgSrcPort for filtering. | ||||
| CvmapNewCfgDstPort | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.22 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff). | ||||
| CvmapNewCfgDstPortMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.23 | DisplayString | RW | |
column · DisplayString · read-write · current The mask to be applied to aclNewCfgDstPort for filtering. | ||||
| CvmapNewCfgTCPFlags | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.24 | Bits | RW | |
column · Bits · read-write · current The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CvmapNewCfgTCPFlagsMask | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.25 | Bits | RW | |
column · Bits · read-write · current The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Default value is 0x3f.
| ||||
| CvmapNewCfgEgressPorts | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.26 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the VMAP configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering. | ||||
| CvmapNewCfgStatistics | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current Whether statistics collection for this VMAP is enabled or not.
| ||||
| CvmapNewCfgAddEgressPort | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.28 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be added to the specified VMAP for egress filtering. A value of zero is always returned when this object is read. | ||||
| CvmapNewCfgRemoveEgressPort | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.29 | PortNumber | RW | |
column · PortNumber · read-write · current The port to be removed from the specified VMAP. A value of zero is always returned when this object is read. | ||||
| CvmapNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to delete an VMAP entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgMeterAction | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.31 | INTEGER | RW | |
column · INTEGER · read-write · current Meter Action for this VMAP.
| ||||
| CvmapNewCfgMeterEnable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.32 | INTEGER | RW | |
column · INTEGER · read-write · current Meter state for this VMAP.
| ||||
| CvmapNewCfgKbitsSec | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.33 | Unsigned32 (64..10000000) | RW | |
column · Unsigned32 (64..10000000) · read-write · current The commited rate of meter associated with this VMAP entry. | ||||
| CvmapNewCfgKbitsBurst | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.34 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum burst size of the meter associated with this VMAP entry.
| ||||
| CvmapNewCfgUser | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.35 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Set user defined priority for this VMAP. | ||||
| CvmapNewCfgInprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.36 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Set in profile pkts DSCP value. | ||||
| CvmapNewCfgTos | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.37 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable setting pkts based on TOS bits.
| ||||
| CvmapNewCfgOutprofDscp | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.38 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Set out profile pkts DSCP value. | ||||
| CvmapNewCfgUserEnable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.39 | INTEGER | RW | |
column · INTEGER · read-write · current Set update method for this VMAP.
| ||||
| CvmapNewCfgInprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.40 | INTEGER | RW | |
column · INTEGER · read-write · current Whether in profile update DSCP for this VMAP is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for this VMAP. The value enable(1) is automatically set when setting a value for aclNewCfgInprofDscp object.
| ||||
| CvmapNewCfgOutprofDscpEnable | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current Whether out profile update DSCP for this VMAP is enabled or not. Only the value disable(0) can be set, causing the out profile update DSCP to be disabled for this VMAP. The value enable(1) is automatically set when setting a value for aclNewCfgOutprofDscp object.
| ||||
| CvmapNewCfgReset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.42 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgEthernetReset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.43 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP Ethernet entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgIpv4Reset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.44 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP IPV4 entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgTcpudpReset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.45 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP Tcpudp entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgMeterReset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.46 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP Meter entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgRemarkReset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.47 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP Remark entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgRemarkInprofReset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.48 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP Remark Inprof entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgRemarkOutprofReset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.49 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP Remark Outprof entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgPktfmtReset | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.50 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an VMAP Pktfmt entry. A value of other(1) is always returned when this object is read.
| ||||
| CvmapNewCfgMirrorPort | 1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.51 | Integer32 | RW | |
column · Integer32 · read-write · current Set port in the VMAP for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring. | ||||
| NvmapCfg | 1.3.6.1.4.1.20301.2.7.15.9.3.2 | |||
| NvmapVlanCfg | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1 | |||
| NvmapVlanCfgNonServerPorts | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1 | |||
| TvmapVlanCurCfgNonServerPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.1 | NA | ||
table · not-accessible · current The table of the current configuration of vmaps for the non-server ports of vlans. | ||||
| RvmapVlanCurCfgNonServerPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.1.1 | NA | ||
row · not-accessible · current A row in the table of current configuration of vmaps for the non-server ports of vlans. | ||||
| CvmapVlanCurCfgNonServerPortsVlanIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan id in the table of configured vmaps for the non-server ports of vlan | ||||
| CvmapVlanCurCfgNonServerPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| TvmapVlanNewCfgNonServerPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2 | NA | ||
table · not-accessible · current The table of the new configuration of vmaps for non-server ports of vlans. | ||||
| RvmapVlanNewCfgNonServerPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1 | NA | ||
row · not-accessible · current A row in the table of new configuration of vmaps for the non-server ports of vlans. | ||||
| CvmapVlanNewCfgNonServerPortsVlanIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan id in the table of configured vmaps for the non-server ports of vlan | ||||
| CvmapVlanNewCfgNonServerPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| CvmapVlanNewCfgNonServerPortsAddVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Add a new vmap to the non-server ports of the vlan | ||||
| CvmapVlanNewCfgNonServerPortsRemVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Remove a vmap from the non-server ports of the vlan | ||||
| NvmapVlanCfgServerPorts | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2 | |||
| TvmapVlanCurCfgServerPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.1 | NA | ||
table · not-accessible · current The table of the current configuration of vmaps for server ports of vlans. | ||||
| RvmapVlanCurCfgServerPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.1.1 | NA | ||
row · not-accessible · current A row in the table of current configuration of vmaps for the server ports of vlans. | ||||
| CvmapVlanCurCfgServerPortsVlanIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan id in the table of configured vmaps for the server ports of vlan | ||||
| CvmapVlanCurCfgServerPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| TvmapVlanNewCfgServerPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2 | NA | ||
table · not-accessible · current The table of the new configuration of vmaps for server ports of vlans. | ||||
| RvmapVlanNewCfgServerPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1 | NA | ||
row · not-accessible · current A row in the table of new configuration of vmaps for the server ports of vlans. | ||||
| CvmapVlanNewCfgServerPortsVlanIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan id in the table of configured vmaps for the server ports of vlan | ||||
| CvmapVlanNewCfgServerPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| CvmapVlanNewCfgServerPortsAddVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Add a new vmap to the server ports of the vlan | ||||
| CvmapVlanNewCfgServerPortsRemVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Remove a vmap from the server ports of the vlan | ||||
| NvmapVlanCfgAllPorts | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3 | |||
| TvmapVlanCurCfgAllPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.1 | NA | ||
table · not-accessible · current The table of the current configuration of vmaps for all ports of vlans. | ||||
| RvmapVlanCurCfgAllPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.1.1 | NA | ||
row · not-accessible · current A row in the table of current configuration of vmaps for all ports of vlans. | ||||
| CvmapVlanCurCfgAllPortsVlanIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan id in the table of configured vmaps for all ports of vlan | ||||
| CvmapVlanCurCfgAllPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| TvmapVlanNewCfgAllPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2 | NA | ||
table · not-accessible · current The table of the new configuration of vmaps for all ports of vlans. | ||||
| RvmapVlanNewCfgAllPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1 | NA | ||
row · not-accessible · current A row in the table of new configuration of vmaps for all ports of vlans. | ||||
| CvmapVlanNewCfgAllPortsVlanIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan id in the table of configured vmaps for all ports of vlan | ||||
| CvmapVlanNewCfgAllPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| CvmapVlanNewCfgAllPortsAddVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Add a new vmap to all ports of the vlan | ||||
| CvmapVlanNewCfgAllPortsRemVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Remove a vmap from all vlan ports | ||||
| NvmapGroupCfg | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2 | |||
| NvmapGroupCfgNonServerPorts | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1 | |||
| TvmapGroupCurCfgNonServerPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.1 | NA | ||
table · not-accessible · current The table of the current configuration of vmaps for non-server ports of vm groups. | ||||
| RvmapGroupCurCfgNonServerPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.1.1 | NA | ||
row · not-accessible · current A row in the table of current configuration of vmaps for the non-server ports of vm groups. | ||||
| CvmapGroupCurCfgNonServerPortsGroupIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vm group id in the table of configured vmaps for the non-server ports of vm group | ||||
| CvmapGroupCurCfgNonServerPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| TvmapGroupNewCfgNonServerPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2 | NA | ||
table · not-accessible · current The table of the new configuration of vmaps for non-server ports of vm groups. | ||||
| RvmapGroupNewCfgNonServerPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1 | NA | ||
row · not-accessible · current A row in the table of new configuration of vmaps for the non-server ports of vm groups. | ||||
| CvmapGroupNewCfgNonServerPortsGroupIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vm group id in the table of configured vmaps for the non-server ports of vm group | ||||
| CvmapGroupNewCfgNonServerPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| CvmapGroupNewCfgNonServerPortsAddVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Add a new vmap to the non-server ports of the vm group | ||||
| CvmapGroupNewCfgNonServerPortsRemVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Remove a vmap from the non-server ports of the vm group | ||||
| NvmapGroupCfgServerPorts | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2 | |||
| TvmapGroupCurCfgServerPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.1 | NA | ||
table · not-accessible · current The table of the current configuration of vmaps for server ports of vm groups. | ||||
| RvmapGroupCurCfgServerPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.1.1 | NA | ||
row · not-accessible · current A row in the table of current configuration of vmaps for the server ports of vm groups. | ||||
| CvmapGroupCurCfgServerPortsGroupIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vm group id in the table of configured vmaps for the server ports of vm group | ||||
| CvmapGroupCurCfgServerPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| TvmapGroupNewCfgServerPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2 | NA | ||
table · not-accessible · current The table of the new configuration of vmaps for server ports of vm groups. | ||||
| RvmapGroupNewCfgServerPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1 | NA | ||
row · not-accessible · current A row in the table of new configuration of vmaps for the server ports of vm groups. | ||||
| CvmapGroupNewCfgServerPortsGroupIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vm group id in the table of configured vmaps for the server ports of vm group | ||||
| CvmapGroupNewCfgServerPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| CvmapGroupNewCfgServerPortsAddVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Add a new vmap to the server ports of the vm group | ||||
| CvmapGroupNewCfgServerPortsRemVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Remove a vmap from the server ports of the vm group | ||||
| NvmapGroupCfgAllPorts | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3 | |||
| TvmapGroupCurCfgAllPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.1 | NA | ||
table · not-accessible · current The table of the current configuration of vmaps for all ports of vm groups. | ||||
| RvmapGroupCurCfgAllPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.1.1 | NA | ||
row · not-accessible · current A row in the table of current configuration of vmaps for all ports of vm groups. | ||||
| CvmapGroupCurCfgAllPortsGroupIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vm group id in the table of configured vmaps for all ports of vm group | ||||
| CvmapGroupCurCfgAllPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| TvmapGroupNewCfgAllPortsTable | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2 | NA | ||
table · not-accessible · current The table of the new configuration of vmaps for all ports of vm groups. | ||||
| RvmapGroupNewCfgAllPortsTableEntry | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1 | NA | ||
row · not-accessible · current A row in the table of new configuration of vmaps for all ports of vm groups. | ||||
| CvmapGroupNewCfgAllPortsGroupIdx | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The vm group id in the table of configured vmaps for all ports of vm group | ||||
| CvmapGroupNewCfgAllPortsVmapBitmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context | ||||
| CvmapGroupNewCfgAllPortsAddVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Add a new vmap to all ports of the vm group | ||||
| CvmapGroupNewCfgAllPortsRemVmap | 1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Remove a vmap from all vm group ports | ||||
| Ncee | 1.3.6.1.4.1.20301.2.7.15.13 | |||
| NceeConfig | 1.3.6.1.4.1.20301.2.7.15.13.1 | |||
| SceeCurCfgState | 1.3.6.1.4.1.20301.2.7.15.13.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current CEE is currently on or off.
| ||||
| SceeNewCfgState | 1.3.6.1.4.1.20301.2.7.15.13.1.2 | INTEGER | RC | |
scalar · INTEGER · read-create · current Turn CEE on or off.
| ||||
| Nfcoe | 1.3.6.1.4.1.20301.2.7.15.14 | |||
| NfcoeConfig | 1.3.6.1.4.1.20301.2.7.15.14.1 | |||
| NfipsCfg | 1.3.6.1.4.1.20301.2.7.15.14.1.3 | |||
| SfipsCurCfgState | 1.3.6.1.4.1.20301.2.7.15.14.1.3.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current FIP snooping is currently on or off.
| ||||
| SfipsNewCfgState | 1.3.6.1.4.1.20301.2.7.15.14.1.3.2 | INTEGER | RC | |
scalar · INTEGER · read-create · current Turn FIP snooping on or off.
| ||||
| SfipsCurAclTimeout | 1.3.6.1.4.1.20301.2.7.15.14.1.3.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The removal of acls when FCF and FCOE connections timed out is enabled or disabled.
| ||||
| SfipsNewAclTimeout | 1.3.6.1.4.1.20301.2.7.15.14.1.3.4 | INTEGER | RC | |
scalar · INTEGER · read-create · current Enable or disable the removal of acls when FCF and FCOE connections timed out.
| ||||
| TfipsPortCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.14.1.3.7 | NA | ||
table · not-accessible · current The table of FIP Snooping port current config. | ||||
| RfipsPortCurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.14.1.3.7.1 | NA | ||
| CfipsPortCurCfgIndex | 1.3.6.1.4.1.20301.2.7.15.14.1.3.7.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number | ||||
| CfipsPortCurCfgFcfMode | 1.3.6.1.4.1.20301.2.7.15.14.1.3.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Weither the port is set to have FCF auto detection, on, or off.
| ||||
| CfipsPortCurCfgFipsEna | 1.3.6.1.4.1.20301.2.7.15.14.1.3.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current FIP snooping enabled or disabled on this port.
| ||||
| TfipsPortNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.14.1.3.8 | NA | ||
table · not-accessible · current The table of FIP Snooping port new config. | ||||
| RfipsPortNewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.14.1.3.8.1 | NA | ||
| CfipsPortNewCfgIndex | 1.3.6.1.4.1.20301.2.7.15.14.1.3.8.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number | ||||
| CfipsPortNewCfgFcfMode | 1.3.6.1.4.1.20301.2.7.15.14.1.3.8.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Set this port to have FCF on, off, or auto detection.
| ||||
| CfipsPortNewCfgFipsEna | 1.3.6.1.4.1.20301.2.7.15.14.1.3.8.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable FIP snooping on this port.
| ||||
| NfcoeStats | 1.3.6.1.4.1.20301.2.7.15.14.2 | |||
| TfcoeStatsTable | 1.3.6.1.4.1.20301.2.7.15.14.2.1 | NA | ||
table · not-accessible · current The table of fcoe statistics per switch unit. | ||||
| RfcoeStatsEntry | 1.3.6.1.4.1.20301.2.7.15.14.2.1.1 | NA | ||
| CfcoeStatsIndex | 1.3.6.1.4.1.20301.2.7.15.14.2.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The switch index for fips statistics | ||||
| CfcoeStatsFcfAdded | 1.3.6.1.4.1.20301.2.7.15.14.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The number of FCF added to the FCOE database. | ||||
| CfcoeStatsFcfRemoved | 1.3.6.1.4.1.20301.2.7.15.14.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The number of FCF removed to the FCOE database. | ||||
| CfcoeStatsFcoeAdded | 1.3.6.1.4.1.20301.2.7.15.14.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The number of FCOE connection added to the FCOE database. | ||||
| CfcoeStatsFcoeRemoved | 1.3.6.1.4.1.20301.2.7.15.14.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The number of FCOE connection removed to the FCOE database. | ||||
| SfcoeStatsResetAllCounters | 1.3.6.1.4.1.20301.2.7.15.14.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Reset all FCOE statistics counters.
| ||||
| NfcoeInfo | 1.3.6.1.4.1.20301.2.7.15.14.3 | |||
| NfipsInfo | 1.3.6.1.4.1.20301.2.7.15.14.3.1 | |||
| TfipsInfoPortTable | 1.3.6.1.4.1.20301.2.7.15.14.3.1.1 | NA | ||
table · not-accessible · current The table of fips port run-time information. | ||||
| RfipsInfoPortEntry | 1.3.6.1.4.1.20301.2.7.15.14.3.1.1.1 | NA | ||
row · not-accessible · current A port in the fips information table. | ||||
| CfipsInfoPortIndex | 1.3.6.1.4.1.20301.2.7.15.14.3.1.1.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port index for fips | ||||
| CfipsInfoAclSequencer | 1.3.6.1.4.1.20301.2.7.15.14.3.1.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The fip sequence number for an acl in this port | ||||
| CfipsInfoAcl | 1.3.6.1.4.1.20301.2.7.15.14.3.1.1.1.3 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current An FIPS ACL entry | ||||
| NfipsInfoFcf | 1.3.6.1.4.1.20301.2.7.15.14.3.1.2 | |||
| SfipsInfoFcfCount | 1.3.6.1.4.1.20301.2.7.15.14.3.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of FCFs detected | ||||
| TfipsInfoFcfTable | 1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2 | NA | ||
table · not-accessible · current The table of fips FCF detected. | ||||
| RfipsInfoFcfEntry | 1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1 | NA | ||
| CfipsInfoFcfIndex | 1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current FCF index | ||||
| CfipsInfoFcfMac | 1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current FCF MAC | ||||
| CfipsInfoFcfPort | 1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current FCF Port | ||||
| CfipsInfoFcfVlan | 1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current FCF Vlan | ||||
| NfipsInfoFcoe | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3 | |||
| SfipsInfoFcoeCount | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of FCOE connections | ||||
| TfipsInfoFcoeTable | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2 | NA | ||
table · not-accessible · current The table of fips FCOE connections. | ||||
| RfipsInfoFcoeEntry | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1 | NA | ||
row · not-accessible · current A FCOE connection in the fips information table.
| ||||
| CfipsInfoFcoeIndex | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current FCOE connection index | ||||
| CfipsInfoFcoeVNPortMac | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current FCOE connection VNPort MAC | ||||
| CfipsInfoFcoeFcfMac | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current FCOE connection FCF MAC | ||||
| CfipsInfoFcoePort | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current FCOE connection Port | ||||
| CfipsInfoFcoeVlan | 1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current FCOE connection Vlan | ||||
| NfipsInfoVlans | 1.3.6.1.4.1.20301.2.7.15.14.3.1.4 | |||
| TfipsInfoVlansTable | 1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1 | NA | ||
table · not-accessible · current The table of FCOE VLANs detected. | ||||
| RfipsInfoVlansEntry | 1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1 | NA | ||
row · not-accessible · current A FCOE VLAN in the fipsInfoVlans information table. | ||||
| CfipsInfoVlansId | 1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.1 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current FCoE Vlan index | ||||
| CfipsInfoVlansFeatureIndex | 1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.2 | INTEGER (0..8) | RO | |
column · INTEGER (0..8) · read-only · current FCoE Vlan feature index. The feature index will accept values from 1 to maximum SPAR ID(8) for the VLANs created by SPAR and 0 for the other types of VLANs. | ||||
| CfipsInfoVlansCreator | 1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.3 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The FCoE VLAN Creator. | ||||
| CfipsInfoVlansPorts | 1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| CfipsInfoVlansTrunks | 1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The FCoE VLAN trunk list. | ||||
| NfcoeOper | 1.3.6.1.4.1.20301.2.7.15.14.4 | |||
| NfipsOper | 1.3.6.1.4.1.20301.2.7.15.14.4.1 | |||
| SfipsOperFcfDelete | 1.3.6.1.4.1.20301.2.7.15.14.4.1.1 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Delete an FCF. Take an fcf mac address as the only parameter to delete this fcf from all vlans. Optionally take a vlan number as 2nd parameter to delete fcf from just this vlan. The 2 parameters are seperated by comma with no space allowed. | ||||
| Nvirt | 1.3.6.1.4.1.20301.2.7.15.15 | |||
| NvirtGeneral | 1.3.6.1.4.1.20301.2.7.15.15.1 | |||
| SvirtCurCfgState | 1.3.6.1.4.1.20301.2.7.15.15.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current VM groups global state.
| ||||
| SvirtNewCfgState | 1.3.6.1.4.1.20301.2.7.15.15.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable Virtual Machine Groups
| ||||
| SvirtCurCfgHbPort | 1.3.6.1.4.1.20301.2.7.15.15.1.3 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current Current esx/esxi server to vcenter heartbeat UDP port | ||||
| SvirtNewCfgHbPort | 1.3.6.1.4.1.20301.2.7.15.15.1.4 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Set new esx/esxi server to vcenter heartbeat UDP port | ||||
| SvirtCurCfgVirtCenterIp | 1.3.6.1.4.1.20301.2.7.15.15.1.5 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Virtual Center. | ||||
| SvirtNewCfgVirtCenterIp | 1.3.6.1.4.1.20301.2.7.15.15.1.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Virtual Center. | ||||
| SvirtCurCfgVirtCenterUser | 1.3.6.1.4.1.20301.2.7.15.15.1.7 | DisplayString (SIZE (0..64)) | RO | |
scalar · DisplayString (SIZE (0..64)) · read-only · current Virtual Center username. | ||||
| SvirtNewCfgVirtCenterUser | 1.3.6.1.4.1.20301.2.7.15.15.1.8 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Virtual Center username. | ||||
| SvirtCurCfgVirtCenterSSLAuth | 1.3.6.1.4.1.20301.2.7.15.15.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Authenticate SSL Certificate.
| ||||
| SvirtNewCfgVirtCenterSSLAuth | 1.3.6.1.4.1.20301.2.7.15.15.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Authenticate SSL Certificate.
| ||||
| SvirtNewCfgVirtCenterPasswd | 1.3.6.1.4.1.20301.2.7.15.15.1.11 | DisplayString (SIZE (0..129)) | RW | |
scalar · DisplayString (SIZE (0..129)) · read-write · current Virtual Center password. | ||||
| SvirtNewCfgVirtCenterDelete | 1.3.6.1.4.1.20301.2.7.15.15.1.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Delete Virtual Center specifications
| ||||
| NvmGroups | 1.3.6.1.4.1.20301.2.7.15.15.2 | |||
| TvmCurCfgGroupTable | 1.3.6.1.4.1.20301.2.7.15.15.2.1 | NA | ||
table · not-accessible · current The table of VM groups in the current config | ||||
| RvmCurCfgGroupEntry | 1.3.6.1.4.1.20301.2.7.15.15.2.1.1 | NA | ||
row · not-accessible · current Information about VM on a group in current config.
| ||||
| CvmCurCfgGroupIndex | 1.3.6.1.4.1.20301.2.7.15.15.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the vm group table. | ||||
| CvmCurCfgGroupVlan | 1.3.6.1.4.1.20301.2.7.15.15.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Current Vlan used by the group. | ||||
| CvmCurCfgGroupPorts | 1.3.6.1.4.1.20301.2.7.15.15.2.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VM Group
0 - The represented port does not belong to the VM Group | ||||
| CvmCurCfgGroupTagState | 1.3.6.1.4.1.20301.2.7.15.15.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable VLAN tagging on all VM group ports.
| ||||
| CvmCurCfgGroupStg | 1.3.6.1.4.1.20301.2.7.15.15.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Current stg of the group vlan. | ||||
| CvmCurCfgGroupProfileName | 1.3.6.1.4.1.20301.2.7.15.15.2.1.1.17 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current Current profile name used by the group. | ||||
| CvmCurCfgGroupValidateMode | 1.3.6.1.4.1.20301.2.7.15.15.2.1.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Current validation mode used by the group. | ||||
| TvmNewCfgGroupTable | 1.3.6.1.4.1.20301.2.7.15.15.2.2 | NA | ||
table · not-accessible · current The table of VM groups in the new config | ||||
| RvmNewCfgGroupEntry | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1 | NA | ||
| CvmNewCfgGroupIndex | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the vm group table. | ||||
| CvmNewCfgGroupVlan | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set Vlan to be used by the group. | ||||
| CvmNewCfgGroupPorts | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VM Group
0 - The represented port does not belong to the VM Group | ||||
| CvmNewCfgGroupAddVm | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current Add a virtual machine to the group by UUID / Name / IP / MAC Address Note: MAC address format xx:xx:xx:xx:xx:xx | ||||
| CvmNewCfgGroupRemVm | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current Remove a virtual machine from the group by UUID / Name / IP / MAC Address Note: MAC address format xx:xx:xx:xx:xx:xx | ||||
| CvmNewCfgGroupAddVmIdx | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Add virtual MAC address by index to the group. | ||||
| CvmNewCfgGroupRemVmIdx | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Remove a virtual MAC address by index from the group. | ||||
| CvmNewCfgGroupAddPort | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.8 | PortNumber | RW | |
column · PortNumber · read-write · current Add a port to the group. | ||||
| CvmNewCfgGroupRemPort | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.9 | PortNumber | RW | |
column · PortNumber · read-write · current Remove a port from the group. | ||||
| CvmNewCfgGroupAddTrunk | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Add trunk to the group. | ||||
| CvmNewCfgGroupRemTrunk | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Remove trunk from the group. | ||||
| CvmNewCfgGroupTagState | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Enable VLAN tagging on all VM group ports.
| ||||
| CvmNewCfgGroupAddLacpKey | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.13 | Unsigned32 (1..65535) | RW | |
column · Unsigned32 (1..65535) · read-write · current Add LACP trunk to the group. | ||||
| CvmNewCfgGroupRemLacpKey | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.14 | Unsigned32 (1..65535) | RW | |
column · Unsigned32 (1..65535) · read-write · current Remove LACP trunk from the group. | ||||
| CvmNewCfgGroupAddProfile | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.15 | DisplayString (SIZE (0..40)) | RW | |
column · DisplayString (SIZE (0..40)) · read-write · current Add VM Profile to the group. | ||||
| CvmNewCfgGroupRemProfile | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Remove any VM profile associated with the group.
| ||||
| CvmNewCfgGroupProfileName | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.17 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current New profile name to be used by the group. | ||||
| CvmNewCfgGroupDelete | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current Delete VM Group.
| ||||
| CvmNewCfgGroupStg | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Set group vlan spanning tree group. | ||||
| CvmNewCfgGroupValidateMode | 1.3.6.1.4.1.20301.2.7.15.15.2.2.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current Set group validation mode: noValidation : no validation will be performed. basicCheck: validate ESX port. advancedCheck: validate ESX port and VM UUID.
| ||||
| TvmCurCfgGroupMacTable | 1.3.6.1.4.1.20301.2.7.15.15.2.3 | NA | ||
table · not-accessible · current Virtual machine group current configuration table. | ||||
| RvmCurCfgGroupMaclistEntry | 1.3.6.1.4.1.20301.2.7.15.15.2.3.1 | NA | ||
row · not-accessible · current Information about virtual machine group configuration. Indexes are: - vmCurCfgGroupMacGroupIndex - group number - vmCurCfgGroupMacVMIndex - virtual machine config index | ||||
| CvmCurCfgGroupMacGroupIndex | 1.3.6.1.4.1.20301.2.7.15.15.2.3.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The group number for which the info is related. | ||||
| CvmCurCfgGroupMacVMIndex | 1.3.6.1.4.1.20301.2.7.15.15.2.3.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The virtual machine number for which the info is related. | ||||
| CvmCurCfgGroupMacVMMac | 1.3.6.1.4.1.20301.2.7.15.15.2.3.1.3 | PhysAddress | RO | |
column · PhysAddress · read-only · current virtual machine MAC address. | ||||
| TvmNewCfgGroupMacTable | 1.3.6.1.4.1.20301.2.7.15.15.2.4 | NA | ||
table · not-accessible · current virtual machine group new configuration table. | ||||
| RvmNewCfgGroupMaclistEntry | 1.3.6.1.4.1.20301.2.7.15.15.2.4.1 | NA | ||
row · not-accessible · current Information about virtual machine group | ||||
| CvmNewCfgGroupMacGroupIndex | 1.3.6.1.4.1.20301.2.7.15.15.2.4.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The group number for which the info is related. | ||||
| CvmNewCfgGroupMacVMIndex | 1.3.6.1.4.1.20301.2.7.15.15.2.4.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The virtual machine number for which the info is related. | ||||
| CvmNewCfgGroupMacVMMac | 1.3.6.1.4.1.20301.2.7.15.15.2.4.1.3 | PhysAddress | RO | |
column · PhysAddress · read-only · current The virtual machine MAC address. | ||||
| NvmPolicy | 1.3.6.1.4.1.20301.2.7.15.15.3 | |||
| Nvmbw | 1.3.6.1.4.1.20301.2.7.15.15.3.1 | |||
| TvmbwCurCfgTable | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1 | NA | ||
table · not-accessible · current The table of current VM Bandwidth configuration. | ||||
| RvmbwCurCfgEntry | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1 | NA | ||
| CvmbwCurCfgMac | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address of VM for which bandwidth control information is related. | ||||
| CvmbwCurCfgTxRate | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current VM transmit bandwidth committed rate in kbps (ingress for switch). | ||||
| CvmbwCurCfgTxBurst | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current VM transmit bandwidth max burst size in kilobits (ingress for switch). | ||||
| CvmbwCurCfgTxAclId | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current ACL used for VM transmit bandwidth. | ||||
| CvmbwCurCfgRxRate | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current VM receive bandwidth committed rate in kbps (egress for switch). | ||||
| CvmbwCurCfgRxBurst | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current VM receive bandwidth max burst size in kilobits (egress for switch). | ||||
| CvmbwCurCfgCtrl | 1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/Disable VM bandwidth control entry.
| ||||
| TvmbwNewCfgTable | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2 | NA | ||
table · not-accessible · current The table of new VM Bandwidth configuration. | ||||
| RvmbwNewCfgEntry | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1 | NA | ||
| CvmbwNewCfgMac | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address of VM for which bandwidth control information is related. | ||||
| CvmbwNewCfgTxRate | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current VM transmit bandwidth committed rate in kbps (ingress for switch). Set this to zero to disable transmit bandwidth control. | ||||
| CvmbwNewCfgTxBurst | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current VM transmit bandwidth max burst size in kilobits (ingress for switch). Set this to zero to disable transmit bandwidth control. | ||||
| CvmbwNewCfgTxAclId | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current ACL used for VM transmit bandwidth. This is optional parameter. If set to zero the system will choose one ACL for tx bandwidth control. | ||||
| CvmbwNewCfgRxRate | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current VM receive bandwidth committed rate in kbps (egress for switch). Set this to zero to disable receive bandwidth control. | ||||
| CvmbwNewCfgRxBurst | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current VM receive bandwidth max burst size in kilobits (egress for switch). Set this to zero to disable receive bandwidth control. | ||||
| CvmbwNewCfgCtrl | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current VM bandwidth control entry status
| ||||
| CvmbwNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to delete a VM Bandwidth entry. other(1) is returned always when read. To delete an entry enter delete(2).
| ||||
| NvmProfiles | 1.3.6.1.4.1.20301.2.7.15.15.4 | |||
| TvmCurCfgProfilesTable | 1.3.6.1.4.1.20301.2.7.15.15.4.1 | NA | ||
table · not-accessible · current The table of VM profiles in the current config | ||||
| RvmCurCfgProfileEntry | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1 | NA | ||
row · not-accessible · current Information about a VM profile in current config.
| ||||
| CvmCurCfgProfileIndex | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the vm profiles table (1..32). | ||||
| CvmCurCfgProfileName | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.2 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current VM Profile name. | ||||
| CvmCurCfgProfileVlan | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Current VM Profile VLAN Id | ||||
| CvmCurCfgProfileShapingAverage | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Current VM Profile Shaping Average. | ||||
| CvmCurCfgProfileShapingBurst | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Current VM Profile Shaping Burst. | ||||
| CvmCurCfgProfileShapingPeak | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Current VM Profile Shaping Peak. | ||||
| CvmCurCfgProfileEgressShapingAverage | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Current VM Profile Egress Shaping Average. | ||||
| CvmCurCfgProfileEgressShapingBurst | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Current VM Profile Egress Shaping Burst. | ||||
| CvmCurCfgProfileEgressShapingPeak | 1.3.6.1.4.1.20301.2.7.15.15.4.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Current VM Profile Egress Shaping Peak. | ||||
| TvmNewCfgProfilesTable | 1.3.6.1.4.1.20301.2.7.15.15.4.2 | NA | ||
table · not-accessible · current The table of VM profiles in the current config | ||||
| RvmNewCfgProfileEntry | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1 | NA | ||
row · not-accessible · current Information about a VM profile in current config.
| ||||
| CvmNewCfgProfileIndex | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the vm profiles table (1..32). | ||||
| CvmNewCfgProfileName | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.2 | DisplayString (SIZE (1..39)) | RW | |
column · DisplayString (SIZE (1..39)) · read-write · current VM Profile name. | ||||
| CvmNewCfgProfileVlan | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Vlan to be used by the VM profile. | ||||
| CvmNewCfgProfileShapingAverage | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Shaping average to be used by the VM profile. | ||||
| CvmNewCfgProfileShapingBurst | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Shaping burst to be used by the VM profile. | ||||
| CvmNewCfgProfileShapingPeak | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Shaping peak to be used by the VM profile. | ||||
| CvmNewCfgProfileDelete | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Delete VM Profile.
| ||||
| CvmNewCfgProfileEgressShapingAverage | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current Egress shaping average to be used by the VM profile. | ||||
| CvmNewCfgProfileEgressShapingBurst | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current Egress shaping burst to be used by the VM profile. | ||||
| CvmNewCfgProfileEgressShapingPeak | 1.3.6.1.4.1.20301.2.7.15.15.4.2.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Egress shaping peak to be used by the VM profile. | ||||
| NvirtVMware | 1.3.6.1.4.1.20301.2.7.15.15.5 | |||
| SvirtVMwareNameTableUpdate | 1.3.6.1.4.1.20301.2.7.15.15.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to get information from the Virtual Center. Set this value to get(2) to update the host and VM name tables: virtVMwareHostNameTable, virtVMwareVMNameTable with information from the Virtual Center. These two tables can be querried by subsequent Get operations without accessing the Virtual Center. To refresh these two tables, set virtVMwareNameTableUpdate again. ok(1) is returned always when read.
| ||||
| TvirtVMwareHostNameTable | 1.3.6.1.4.1.20301.2.7.15.15.5.2 | NA | ||
table · not-accessible · current The table of names of VMware hosts in the Virtual Center. | ||||
| RvirtVMwareHostNameEntry | 1.3.6.1.4.1.20301.2.7.15.15.5.2.1 | NA | ||
row · not-accessible · current Information about names of VMware hosts in the Data Center. | ||||
| CvirtVMwareHostNameIndex | 1.3.6.1.4.1.20301.2.7.15.15.5.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the virtVMwareHostNameTable table. | ||||
| CvirtVMwareHostNameUUID | 1.3.6.1.4.1.20301.2.7.15.15.5.2.1.2 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The UUID of a VMware host. | ||||
| CvirtVMwareHostNameIpAddress | 1.3.6.1.4.1.20301.2.7.15.15.5.2.1.3 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The IP address of a VMware host. | ||||
| CvirtVMwareHostNameName | 1.3.6.1.4.1.20301.2.7.15.15.5.2.1.4 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The name of a VMware host. | ||||
| TvirtVMwareVMNameTable | 1.3.6.1.4.1.20301.2.7.15.15.5.3 | NA | ||
table · not-accessible · current The table of VMware virtual machines in the Data Center. | ||||
| RvirtVMwareVMNameEntry | 1.3.6.1.4.1.20301.2.7.15.15.5.3.1 | NA | ||
row · not-accessible · current Information about VMware virtual machines in the Data Center. | ||||
| CvirtVMwareVMNameIndex | 1.3.6.1.4.1.20301.2.7.15.15.5.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the VMware virtual machine table in the Data Center. | ||||
| CvirtVMwareVMNameUUID | 1.3.6.1.4.1.20301.2.7.15.15.5.3.1.2 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The UUID of a virtual machine. | ||||
| CvirtVMwareVMNameVMwareName | 1.3.6.1.4.1.20301.2.7.15.15.5.3.1.3 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The name of a virtual machine given by VMware. | ||||
| CvirtVMwareVMNameOsName | 1.3.6.1.4.1.20301.2.7.15.15.5.3.1.4 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The name of a virtual machine given by the host OS. | ||||
| CvirtVMwareVMNameIpAddress | 1.3.6.1.4.1.20301.2.7.15.15.5.3.1.5 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The IP address of a virtual machine. | ||||
| SvirtVMwareHost | 1.3.6.1.4.1.20301.2.7.15.15.5.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current VMware host ID This is an action object to get information about a specific host from the Virtual Center. This object specifies the host ID by UUID / IP Address / Name. Setting this objects populates the following 3 tables: virtVMwareHostVswitchTable, virtVMwareHostPGTable, virtVMwareHostDetailInfoTable with the host's networking information from the Virtul Center. These three tables can be querried by subsequent Get operations without accessing the Virtual Center. To refresh these tables, set this object to the target host. | ||||
| TvirtVMwareHostVswitchTable | 1.3.6.1.4.1.20301.2.7.15.15.5.5 | NA | ||
table · not-accessible · current The table of Vswitches available on the specified host. | ||||
| RvirtVMwareHostVswitchEntry | 1.3.6.1.4.1.20301.2.7.15.15.5.5.1 | NA | ||
row · not-accessible · current Information about Vswitches available on the specified host. | ||||
| CvirtVMwareHostVswitchIndex | 1.3.6.1.4.1.20301.2.7.15.15.5.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Vswitch table on the specified host. | ||||
| CvirtVMwareHostVswitchName | 1.3.6.1.4.1.20301.2.7.15.15.5.5.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The name of a Vswitch on the specified host. | ||||
| TvirtVMwareHostPGTable | 1.3.6.1.4.1.20301.2.7.15.15.5.6 | NA | ||
table · not-accessible · current The table of Port Groups available on the specified host. | ||||
| RvirtVMwareHostPGEntry | 1.3.6.1.4.1.20301.2.7.15.15.5.6.1 | NA | ||
row · not-accessible · current Information about Port Groups available on the specified host. | ||||
| CvirtVMwareHostPGIndex | 1.3.6.1.4.1.20301.2.7.15.15.5.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Port Group table on the specified host. | ||||
| CvirtVMwareHostPGName | 1.3.6.1.4.1.20301.2.7.15.15.5.6.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The name of a Port Group on the specified host. | ||||
| CvirtVMwareHostPGVswitchName | 1.3.6.1.4.1.20301.2.7.15.15.5.6.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The name of a Vswitch on the specified host. | ||||
| TvirtVMwareHostDetailInfoTable | 1.3.6.1.4.1.20301.2.7.15.15.5.7 | NA | ||
table · not-accessible · current The table of detailed information available on the specified host/VM interface. | ||||
| RvirtVMwareHostDetailInfoEntry | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1 | NA | ||
row · not-accessible · current Detailed information available on the specified host/VM interface. | ||||
| CvirtVMwareHostDetailInfoIndex | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the detailed information table on the specified host/VM interface. | ||||
| CvirtVMwareHostDetailInfoMACAddr | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The MAC address of the host/VM interface. | ||||
| CvirtVMwareHostDetailInfoPort | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The port number of the specified host/VM interface. | ||||
| CvirtVMwareHostDetailInfoType | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Interface type | ||||
| CvirtVMwareHostDetailInfoIPAddr | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The IP address of the specified host/VM interface. | ||||
| CvirtVMwareHostDetailInfoUUID | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The UUID of the specified host/VM interface. | ||||
| CvirtVMwareHostDetailInfoVswitch | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the virtual switch of the specified host/VM interface. | ||||
| CvirtVMwareHostDetailInfoPortGroup | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the port group of the specified host/VM interface. | ||||
| CvirtVMwareHostDetailInfoVlanID | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current The VLAN ID of the specified host/VM interface. | ||||
| CvirtVMwareHostDetailInfoHostName | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the specified host interface. N/A for VMs. | ||||
| CvirtVMwareHostDetailInfoVMVCenterName | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the Virtual Center of the specified VM interface. N/A for host interfaces. | ||||
| CvirtVMwareHostDetailInfoVMOSHostName | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the VM set by the host operating system. N/A for host interfaces. | ||||
| CvirtVMwareHostDetailInfoVMCurrentHost | 1.3.6.1.4.1.20301.2.7.15.15.5.7.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the host of the specified VM. N/A for host interfaces. | ||||
| SvirtVMwareVM | 1.3.6.1.4.1.20301.2.7.15.15.5.8 | DisplayString | RW | |
scalar · DisplayString · read-write · current VMware virtual machine ID This is an action object to get information about a specific virtual machine from the Virtual Center. This object specifies the VM ID by by UUID / IP Address / Name. Setting this object populates the virtVMwareVMInfoTable table with networking information for this VM from the Virtual Center. This table can be querried by subsequent Get operations without accessing the Virtual Center. To refresh the table, set this object to the target VM. | ||||
| TvirtVMwareVMInfoTable | 1.3.6.1.4.1.20301.2.7.15.15.5.9 | NA | ||
table · not-accessible · current The table of networking information available on the specified VM. | ||||
| RvirtVMwareVMInfoEntry | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1 | NA | ||
row · not-accessible · current Detailed information available on the specified VM. | ||||
| CvirtVMwareVMInfoIndex | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the table with information on the specified VM. | ||||
| CvirtVMwareVMInfoMACAddr | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The MAC address of the specified VM. | ||||
| CvirtVMwareVMInfoPort | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The port number of the specified VM. | ||||
| CvirtVMwareVMInfoType | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Interface type | ||||
| CvirtVMwareVMInfoIPAddr | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The IP address of the specified VM. | ||||
| CvirtVMwareVMInfoUUID | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The UUID of the specified VM. | ||||
| CvirtVMwareVMInfoVswitch | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the virtual switch of the specified VM. | ||||
| CvirtVMwareVMInfoPortGroup | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the port group of the specified VM. | ||||
| CvirtVMwareVMInfoVlanID | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current The VLAN ID of the specified VM. | ||||
| CvirtVMwareVMInfoVMVCenterName | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the Virtual Center of the specified VM. | ||||
| CvirtVMwareVMInfoVMOSHostName | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the VM set by the host operating system. | ||||
| CvirtVMwareVMInfoVMCurrentHost | 1.3.6.1.4.1.20301.2.7.15.15.5.9.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the host of the specified VM. | ||||
| NvirtCurCfgVMwareHello | 1.3.6.1.4.1.20301.2.7.15.15.5.10 | |||
| SvirtCurCfgVMwareHelloEnable | 1.3.6.1.4.1.20301.2.7.15.15.5.10.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current value for hello advertising status
| ||||
| SvirtCurCfgVMwareHelloTimer | 1.3.6.1.4.1.20301.2.7.15.15.5.10.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Current hello packet send interval | ||||
| SvirtCurCfgVMwareHelloPorts | 1.3.6.1.4.1.20301.2.7.15.15.5.10.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Current value for the configured hello port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the hello ports list
0 - The represented port does not belong to the hello ports list | ||||
| SvirtCurCfgVMwareHelloAddr | 1.3.6.1.4.1.20301.2.7.15.15.5.10.4 | IpAddress | RO | |
scalar · IpAddress · read-only · current Current VM hello IP address | ||||
| NvirtNewCfgVMwareHello | 1.3.6.1.4.1.20301.2.7.15.15.5.11 | |||
| SvirtNewCfgVMwareHelloEnable | 1.3.6.1.4.1.20301.2.7.15.15.5.11.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current New value for hello advertising status
| ||||
| SvirtNewCfgVMwareHelloTimer | 1.3.6.1.4.1.20301.2.7.15.15.5.11.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current New hello packet send interval | ||||
| SvirtNewCfgVMwareHelloPorts | 1.3.6.1.4.1.20301.2.7.15.15.5.11.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current New value for the configured hello port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the hello ports list
0 - The represented port does not belong to the hello ports list | ||||
| SvirtNewCfgVMwareHelloAddPort | 1.3.6.1.4.1.20301.2.7.15.15.5.11.4 | PortNumber | RW | |
scalar · PortNumber · read-write · current Add a port to the hello port list | ||||
| SvirtNewCfgVMwareHelloRemovePort | 1.3.6.1.4.1.20301.2.7.15.15.5.11.5 | PortNumber | RW | |
scalar · PortNumber · read-write · current Remove a port from the hello port list | ||||
| SvirtNewCfgVMwareHelloAddr | 1.3.6.1.4.1.20301.2.7.15.15.5.11.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current New VM hello IP address | ||||
| Nevb | 1.3.6.1.4.1.20301.2.7.15.15.6 | |||
| NevbConfig | 1.3.6.1.4.1.20301.2.7.15.15.6.1 | |||
| TevbCurCfgProfilesTable | 1.3.6.1.4.1.20301.2.7.15.15.6.1.3 | NA | ||
table · not-accessible · current The table of EVB Profiles in the current config | ||||
| RevbCurCfgProfileEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.1.3.1 | NA | ||
row · not-accessible · current Information about EVB Profile in current config. | ||||
| CevbCurCfgProfileIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the evb profile table. | ||||
| CevbCurCfgRR | 1.3.6.1.4.1.20301.2.7.15.15.6.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Enable RR on port.
| ||||
| CevbCurCfgVSIDisc | 1.3.6.1.4.1.20301.2.7.15.15.6.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable VSI Discover capability on port.
| ||||
| TevbNewCfgProfilesTable | 1.3.6.1.4.1.20301.2.7.15.15.6.1.4 | NA | ||
table · not-accessible · current The table of EVB Profiles in the new config | ||||
| RevbNewCfgProfileEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.1.4.1 | NA | ||
row · not-accessible · current Information about EVB Profile in new config. | ||||
| CevbNewCfgProfileIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.1.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the evb profile table. | ||||
| CevbNewCfgRR | 1.3.6.1.4.1.20301.2.7.15.15.6.1.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable RR on port.
| ||||
| CevbNewCfgVSIDisc | 1.3.6.1.4.1.20301.2.7.15.15.6.1.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable VSI Discover capability on port.
| ||||
| TevbCurCfgVsidbTable | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5 | NA | ||
table · not-accessible · current The table of EVB VSI Database server in the current config | ||||
| RevbCurCfgVsidbEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1 | NA | ||
row · not-accessible · current Information about EVB VSI Database in current config.
| ||||
| CevbCurCfgVsidbIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the evb vsi database server table. | ||||
| CevbCurCfgVsidbMgrIp | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current VSI DB Manager IP address. | ||||
| CevbCurCfgVsidbPort | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.3 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VSI DB Manager Port. | ||||
| CevbCurCfgVsidbDocpath | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current VSI DB Document Path. | ||||
| CevbCurCfgVsidbAlltypes | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current VSI DB Document File. | ||||
| CevbCurCfgVsidbInterval | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current VSI DB Update Interval in second. | ||||
| CevbCurCfgVsidbPhyport | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The port via that switch connects to VSI DB server, such as mgt, extm, data. | ||||
| CevbCurCfgVsidbProtocol | 1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current VSI DB Protocol, HTTP or HTTPS. | ||||
| TevbNewCfgVsidbTable | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6 | NA | ||
table · not-accessible · current The table of EVB VSI Database in the new config | ||||
| RevbNewCfgVsidbEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1 | NA | ||
row · not-accessible · current Information about EVB VSI Database in new config.
| ||||
| CevbNewCfgVsidbIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the evb vsi database server table. | ||||
| CevbNewCfgVsidbMgrIp | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.2 | DisplayString (SIZE (0..40)) | RW | |
column · DisplayString (SIZE (0..40)) · read-write · current VSI DB Manager IP address. | ||||
| CevbNewCfgVsidbPort | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.3 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current VSI DB Manager Port. | ||||
| CevbNewCfgVsidbDocpath | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.4 | DisplayString (SIZE (0..127)) | RW | |
column · DisplayString (SIZE (0..127)) · read-write · current VSI DB Document Path. | ||||
| CevbNewCfgVsidbAlltypes | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.5 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current VSI DB Document File. | ||||
| CevbNewCfgVsidbInterval | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current VSI DB Update Interval in second, range from 5s to 300s, 0 means disable auto update. | ||||
| CevbNewCfgVsidbPhyport | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.7 | DisplayString (SIZE (0..7)) | RW | |
column · DisplayString (SIZE (0..7)) · read-write · current The port via that switch connects to VSI DB server, such as mgt, extm, data. | ||||
| CevbNewCfgVsidbProtocol | 1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.8 | DisplayString (SIZE (0..5)) | RW | |
column · DisplayString (SIZE (0..5)) · read-write · current VSI DB Protocol, HTTP or HTTPS. | ||||
| NevbInfo | 1.3.6.1.4.1.20301.2.7.15.15.6.2 | |||
| TvdpTLVInfoTable | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1 | NA | ||
table · not-accessible · current The table of associated VDP TLV Info. | ||||
| RvdpTLVInfoEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1 | NA | ||
| CvdpTLVInfoEntryIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the vdp TLV info table. | ||||
| CvdpTLVType | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV Type info. | ||||
| CvdpTLVLength | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV Length info. | ||||
| CvdpTLVOUI | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV OUI info. | ||||
| CvdpTLVsubType | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV Sub Type info. | ||||
| CvdpTLVRequest | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV Request info. | ||||
| CvdpTLVResp | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV Response info. | ||||
| CvdpTLVMgrId | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV Manager ID info. | ||||
| CvdpTLVTypeID | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV Type ID info. | ||||
| CvdpTLVInstanceID | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV instance ID info. | ||||
| CvdpTLVPort | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV port info. | ||||
| CvdpTLVStag | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV stag info. | ||||
| CvdpNumEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVVlan1 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac1 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.15 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan2 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac2 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan3 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac3 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.19 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan4 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac4 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.21 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan5 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac5 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.23 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan6 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac6 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.25 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan7 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac7 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.27 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan8 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.28 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac8 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.29 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan9 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.30 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac9 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.31 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan10 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.32 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac10 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.33 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan11 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.34 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac11 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.35 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| CvdpTLVVlan12 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.36 | Integer32 | RO | |
column · Integer32 · read-only · current The vdp TLV vlan info. | ||||
| CvdpTLVmac12 | 1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.37 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vdp TLV mac info. | ||||
| TvmsInfoTable | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2 | NA | ||
table · not-accessible · current The table of active VM Info. | ||||
| RvmsInfoEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1 | NA | ||
| CvmsInfoEntryIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the active VM info table. | ||||
| CvmsInfoTypeId | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI Type ID info of the active VM | ||||
| CvmsInfoVersion | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI Type version info of the active VM | ||||
| CvmsInfoMac | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The VSI Mac info of the active VM | ||||
| CvmsInfoVlan | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI vlan info of the active VM | ||||
| CvmsInfoPort | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI port info of the active VM | ||||
| CvmsInfoTxACL | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI Tx ACL info of the active VM | ||||
| CvmsInfoRxEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI Rx info of the active VM | ||||
| CvmsInfoACLs | 1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current The ACL info of the active VM | ||||
| TvsiInfoTable | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3 | NA | ||
table · not-accessible · current The table of vsi policy Info. | ||||
| RvsiInfoEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1 | NA | ||
| CvsiInfoEntryIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the vsi info table. | ||||
| CvsiInfoTypeId | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI Type ID info | ||||
| CvsiInfoVersion | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI Type version info | ||||
| CvsiInfoMac | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The VSI Mac Info | ||||
| CvsiInfoVlan | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI vlan info | ||||
| CvsiInfoPort | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI port info | ||||
| CvsiInfoTxACL | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI Tx ACL info | ||||
| CvsiInfoRxEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The VSI Rx info | ||||
| TvsidbInfoTable | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4 | NA | ||
table · not-accessible · current The table of VSI Database Info. | ||||
| RvsidbInfoEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1 | NA | ||
| CvsidbInfoEntryIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the VSI Database table. | ||||
| CvsidbInfoName | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database Name. | ||||
| CvsidbInfoTypeId | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Type Id. | ||||
| CvsidbInfoVersion | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Version. | ||||
| CvsidbInfoManagerId | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Manager Id. | ||||
| CvsidbInfoVlanIds | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database VLAN List. | ||||
| CvsidbInfoTxRate | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Transmit Rate. | ||||
| CvsidbInfoTxBurst | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Transmit Burst. | ||||
| CvsidbInfoRxRate | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Receive Rate. | ||||
| CvsidbInfoRxBurst | 1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Receove Burst. | ||||
| TvsidbAclInfoTable | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5 | NA | ||
table · not-accessible · current The table of VSI Database ACLs Info. | ||||
| RvsidbAclInfoEntry | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1 | NA | ||
row · not-accessible · current Information about VSI database | ||||
| CvsidbAclInfoEntryDbIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the VSI Database table. | ||||
| CvsidbAclInfoEntryAclIndex | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the VSI Database ACLs table. | ||||
| CvsidbAclInfoTypeId | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Type Id. | ||||
| CvsidbAclInfoVersion | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Version. | ||||
| CvsidbAclInfoManagerId | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current VSI Database Manager Id. | ||||
| CvsidbAclInfoSrcMACAddress | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Source MAC address. | ||||
| CvsidbAclInfoSrcMACMask | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Source MAC address mask. | ||||
| CvsidbAclInfoDstMACAddress | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Destination MAC address. | ||||
| CvsidbAclInfoDstMACMask | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Destination MAC address mask. | ||||
| CvsidbAclInfoVlanId | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.10 | INTEGER (0..4095) | RO | |
column · INTEGER (0..4095) · read-only · current VSI Database ACL Virtual LAN value. | ||||
| CvsidbAclInfoEthernetType | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Ethernet type value, 'none' for not initialised, within the ranger 1536-65535. | ||||
| CvsidbAclInfoSrcIPAddress | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.14 | IpAddress | RO | |
column · IpAddress · read-only · current VSI Database ACL Source IP Address, only available when EthernetType is IPv4(0x0800). | ||||
| CvsidbAclInfoSrcIPMask | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.15 | IpAddress | RO | |
column · IpAddress · read-only · current VSI Database ACL Source IP Address mask, only available when EthernetType is IPv4(0x0800). | ||||
| CvsidbAclInfoDstIPAddress | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.16 | IpAddress | RO | |
column · IpAddress · read-only · current VSI Database ACL Destination IP Address, only available when EthernetType is IPv4(0x0800). | ||||
| CvsidbAclInfoDstIPMask | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.17 | IpAddress | RO | |
column · IpAddress · read-only · current VSI Database ACL Destination IP Address mask, only available when EthernetType is IPv4(0x0800). | ||||
| CvsidbAclInfoTypeOfService | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.18 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Type Of Service value, only available when EthernetType is IPv4(0x0800), 'none' for not initialised, within the ranger 0-255. | ||||
| CvsidbAclInfoProtocol | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.19 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL IP protocol, only available when EthernetType is IPv4(0x0800), 'none' for not initialised, within the ranger 0-255. | ||||
| CvsidbAclInfoTCPFlags | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.20 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL TCP Flags value, only available when EthernetType is IPv4(0x0800) and Protocol is TCP(6). | ||||
| CvsidbAclInfoTCPFlagsMask | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.21 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL TCP Flags mask, only available when EthernetType is IPv4(0x0800) and Protocol is TCP(6). | ||||
| CvsidbAclInfoSrcPort | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.22 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current VSI Database ACL Source TCP/UDP Port value, only available when EthernetType is IPv4(0x0800) and Protocol is TCP(6) or UDP(17). | ||||
| CvsidbAclInfoSrcPortMask | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.23 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Source TCP/UDP Port mask, only available when EthernetType is IPv4(0x0800) and Protocol is TCP(6) or UDP(17). | ||||
| CvsidbAclInfoDstPort | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.24 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current VSI Database ACL Destination TCP/UDP Port value, only available when EthernetType is IPv4(0x0800) and Protocol is TCP(6) or UDP(17). | ||||
| CvsidbAclInfoDstPortMask | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.25 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Destination TCP/UDP Port mask, only available when EthernetType is IPv4(0x0800) and Protocol is TCP(6) or UDP(17). | ||||
| CvsidbAclInfoAction | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.26 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL Action | ||||
| CvsidbAclInfoNewPrio | 1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.27 | DisplayString | RO | |
column · DisplayString · read-only · current VSI Database ACL New Pirority value, only available when Action includes 'setpriority', 'none' for not initialised. | ||||
| NevbOper | 1.3.6.1.4.1.20301.2.7.15.15.6.3 | |||
| SevbVsidbOper | 1.3.6.1.4.1.20301.2.7.15.15.6.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to 'update(2)', it downloads the xml file from VSIDB server and update local VSI database; when set to 'clean(3)', it cleans local VSI database; 'ok(1)' is returned when the object is read.
| ||||
| SevbAssocVsiClean | 1.3.6.1.4.1.20301.2.7.15.15.6.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to 'clean(2)', it cleans all associated VSIs; 'ok(1)' is returned when the object is read.
| ||||
| NvmCheck | 1.3.6.1.4.1.20301.2.7.15.15.7 | |||
| NvmCurCfgCheck | 1.3.6.1.4.1.20301.2.7.15.15.7.1 | |||
| SvmCurCfgCheckActionBasic | 1.3.6.1.4.1.20301.2.7.15.15.7.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current settings for basic checking mode
| ||||
| SvmCurCfgCheckActionAdvanced | 1.3.6.1.4.1.20301.2.7.15.15.7.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current settings for advanced checking mode
| ||||
| SvmCurCfgCheckAclsMax | 1.3.6.1.4.1.20301.2.7.15.15.7.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Current value for the maximum number of ACLs that can be used by Mac Spoofing Check feature | ||||
| SvmCurCfgCheckTrust | 1.3.6.1.4.1.20301.2.7.15.15.7.1.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Current value for the configured trusted port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trusted ports list
0 - The represented port does not belong to the trusted ports list | ||||
| NvmNewCfgCheck | 1.3.6.1.4.1.20301.2.7.15.15.7.2 | |||
| SvmNewCfgCheckActionBasic | 1.3.6.1.4.1.20301.2.7.15.15.7.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current New settings for basic checking mode
| ||||
| SvmNewCfgCheckActionAdvanced | 1.3.6.1.4.1.20301.2.7.15.15.7.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current New settings for advanced checking mode
| ||||
| SvmNewCfgCheckAclsMax | 1.3.6.1.4.1.20301.2.7.15.15.7.2.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current New value for the maximum number of ACLs that can be used by Mac Spoofing Check feature | ||||
| SvmNewCfgCheckTrust | 1.3.6.1.4.1.20301.2.7.15.15.7.2.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current New value for the configured trusted port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trusted ports list
0 - The represented port does not belong to the trusted ports list | ||||
| SvmNewCfgCheckTrustAddPort | 1.3.6.1.4.1.20301.2.7.15.15.7.2.5 | PortNumber | RW | |
scalar · PortNumber · read-write · current Add port to the configured trusted port list. | ||||
| SvmNewCfgCheckTrustRemPort | 1.3.6.1.4.1.20301.2.7.15.15.7.2.6 | PortNumber | RW | |
scalar · PortNumber · read-write · current Remove port from the configured trusted port list. | ||||
| NvmReadyMisc | 1.3.6.1.4.1.20301.2.7.15.15.8 | |||
| SvmReadyLocalAdmMac | 1.3.6.1.4.1.20301.2.7.15.15.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Treat locally administred MAC address as VMs
| ||||
| TvmReadyCurCfgOuiTbl | 1.3.6.1.4.1.20301.2.7.15.15.8.2 | NA | ||
table · not-accessible · current The table of current VM Ready OUI configuration. | ||||
| RvmReadyCurCfgOuiEntry | 1.3.6.1.4.1.20301.2.7.15.15.8.2.1 | NA | ||
| CvmReadyCurCfgOuiMacIdx | 1.3.6.1.4.1.20301.2.7.15.15.8.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current OUI of locally administred MAC address | ||||
| CvmReadyCurCfgOuiMac | 1.3.6.1.4.1.20301.2.7.15.15.8.2.1.2 | PhysAddress | RO | |
column · PhysAddress · read-only · current OUI of locally administred MAC address | ||||
| CvmReadyCurCfgVendor | 1.3.6.1.4.1.20301.2.7.15.15.8.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Vendor name of the OUI locally administred | ||||
| TvmReadyNewCfgOuiTbl | 1.3.6.1.4.1.20301.2.7.15.15.8.3 | NA | ||
table · not-accessible · current The table of new VM Ready OUI configuration. | ||||
| RvmReadyNewCfgOuiEntry | 1.3.6.1.4.1.20301.2.7.15.15.8.3.1 | NA | ||
| CvmReadyNewCfgOuiMacIdx | 1.3.6.1.4.1.20301.2.7.15.15.8.3.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current OUI of locally administred MAC address | ||||
| CvmReadyNewCfgOuiMac | 1.3.6.1.4.1.20301.2.7.15.15.8.3.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current New OUI of locally administred MAC address Format xx:yy:zz | ||||
| CvmReadyNewCfgVendor | 1.3.6.1.4.1.20301.2.7.15.15.8.3.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current Vendor name of the OUI locally administred | ||||
| CvmReadyNewCfgDelete | 1.3.6.1.4.1.20301.2.7.15.15.8.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current If set the OUI of the locally administred MAC would be deleted
| ||||
| Nvnic | 1.3.6.1.4.1.20301.2.7.15.16 | |||
| SvnicCurCfgState | 1.3.6.1.4.1.20301.2.7.15.16.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current VNIC global state.
| ||||
| SvnicNewCfgState | 1.3.6.1.4.1.20301.2.7.15.16.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable vNIC.
| ||||
| SvnicCurCfgUlShareState | 1.3.6.1.4.1.20301.2.7.15.16.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current VNIC uplink sharing state.
| ||||
| SvnicNewCfgUlShareState | 1.3.6.1.4.1.20301.2.7.15.16.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable vNIC uplink sharing.
| ||||
| SvnicCurCfgEmeterState | 1.3.6.1.4.1.20301.2.7.15.16.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current VNIC egress metering state.
| ||||
| SvnicNewCfgEmeterState | 1.3.6.1.4.1.20301.2.7.15.16.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable vNIC egress metering.
| ||||
| TvnicCurCfgVnicTable | 1.3.6.1.4.1.20301.2.7.15.16.7 | NA | ||
table · not-accessible · current The table of vNICs | ||||
| RvnicCurCfgVnicEntry | 1.3.6.1.4.1.20301.2.7.15.16.7.1 | NA | ||
row · not-accessible · current A vNIC in the vnicCurCfgVnicTable | ||||
| CvnicCurCfgVnicPortIndex | 1.3.6.1.4.1.20301.2.7.15.16.7.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number of the vNIC. | ||||
| CvnicCurCfgVnicIndex | 1.3.6.1.4.1.20301.2.7.15.16.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The vNIC number of the vNIC. | ||||
| CvnicCurCfgVnicState | 1.3.6.1.4.1.20301.2.7.15.16.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The state the vNIC.
| ||||
| CvnicCurCfgVnicBw | 1.3.6.1.4.1.20301.2.7.15.16.7.1.4 | INTEGER (1..100) | RO | |
column · INTEGER (1..100) · read-only · current The maximum bandwidth the vNIC. | ||||
| CvnicCurCfgVnicType | 1.3.6.1.4.1.20301.2.7.15.16.7.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the vNIC.
| ||||
| CvnicCurCfgVnicMAC | 1.3.6.1.4.1.20301.2.7.15.16.7.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The MAC address of the vNIC. | ||||
| TvnicNewCfgVnicTable | 1.3.6.1.4.1.20301.2.7.15.16.8 | NA | ||
table · not-accessible · current The table of vNICs | ||||
| RvnicNewCfgVnicEntry | 1.3.6.1.4.1.20301.2.7.15.16.8.1 | NA | ||
row · not-accessible · current A vNIC in the vnicNewCfgVnicTable | ||||
| CvnicNewCfgVnicPortIndex | 1.3.6.1.4.1.20301.2.7.15.16.8.1.1 | PortNumber | RO | |
column · PortNumber · read-only · current The port number of the vNIC. | ||||
| CvnicNewCfgVnicIndex | 1.3.6.1.4.1.20301.2.7.15.16.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The vNIC number of the vNIC. | ||||
| CvnicNewCfgVnicState | 1.3.6.1.4.1.20301.2.7.15.16.8.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The state the vNIC.
| ||||
| CvnicNewCfgVnicBw | 1.3.6.1.4.1.20301.2.7.15.16.8.1.4 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current The maximum bandwidth the vNIC. | ||||
| TvnicCurCfgGroupTable | 1.3.6.1.4.1.20301.2.7.15.16.9 | NA | ||
table · not-accessible · current The table of vNIC Groups | ||||
| RvnicCurCfgGroupEntry | 1.3.6.1.4.1.20301.2.7.15.16.9.1 | NA | ||
| CvnicCurCfgGroupIndex | 1.3.6.1.4.1.20301.2.7.15.16.9.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The vNIC group number. | ||||
| CvnicCurCfgGroupState | 1.3.6.1.4.1.20301.2.7.15.16.9.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The vNIC group state.
| ||||
| CvnicCurCfgGroupVlan | 1.3.6.1.4.1.20301.2.7.15.16.9.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The vNIC group vlan number. | ||||
| CvnicCurCfgGroupFailoverState | 1.3.6.1.4.1.20301.2.7.15.16.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The vNIC group failover state.
| ||||
| CvnicCurCfgGroupVnics | 1.3.6.1.4.1.20301.2.7.15.16.9.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The vNICs in the vNIC group. | ||||
| CvnicCurCfgGroupPorts | 1.3.6.1.4.1.20301.2.7.15.16.9.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Non-vNIC Ports and/or uplink port in the vNIC group. | ||||
| CvnicCurCfgGroupTrunk | 1.3.6.1.4.1.20301.2.7.15.16.9.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Uplink trunk in the vNIC group. | ||||
| CvnicCurCfgGroupKey | 1.3.6.1.4.1.20301.2.7.15.16.9.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Uplink LACP admin key in the vNIC group. | ||||
| TvnicNewCfgGroupTable | 1.3.6.1.4.1.20301.2.7.15.16.10 | NA | ||
table · not-accessible · current The table of vNIC Groups | ||||
| RvnicNewCfgGroupEntry | 1.3.6.1.4.1.20301.2.7.15.16.10.1 | NA | ||
| CvnicNewCfgGroupIndex | 1.3.6.1.4.1.20301.2.7.15.16.10.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The vNIC group number. | ||||
| CvnicNewCfgGroupState | 1.3.6.1.4.1.20301.2.7.15.16.10.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disalbe the vNIC group.
| ||||
| CvnicNewCfgGroupVlan | 1.3.6.1.4.1.20301.2.7.15.16.10.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Set the vNIC group vlan number. | ||||
| CvnicNewCfgGroupFailoverState | 1.3.6.1.4.1.20301.2.7.15.16.10.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set the vNIC group failover state.
| ||||
| CvnicNewCfgGroupAddVnic | 1.3.6.1.4.1.20301.2.7.15.16.10.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current Add a vNIC to the vNIC group. | ||||
| CvnicNewCfgGroupRemVnic | 1.3.6.1.4.1.20301.2.7.15.16.10.1.6 | DisplayString | RW | |
column · DisplayString · read-write · current Remove a vNIC to the vNIC group. | ||||
| CvnicNewCfgGroupAddPort | 1.3.6.1.4.1.20301.2.7.15.16.10.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Add a non-vNIC port or a uplink port to the vNIC group. | ||||
| CvnicNewCfgGroupRemPort | 1.3.6.1.4.1.20301.2.7.15.16.10.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Remove a non-vNIC port or a uplink port from the vNIC group. | ||||
| CvnicNewCfgGroupAddTrunk | 1.3.6.1.4.1.20301.2.7.15.16.10.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Add a uplink trunk to the vNIC group. | ||||
| CvnicNewCfgGroupRemTrunk | 1.3.6.1.4.1.20301.2.7.15.16.10.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Remove the uplink trunk from the vNIC group. other(1) is returned always when read. The following values are writable: delete(2)...to delete the uplink trunk from the vNIC group
| ||||
| CvnicNewCfgGroupAddKey | 1.3.6.1.4.1.20301.2.7.15.16.10.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Add a uplink LACP trunk to the vNIC group. | ||||
| CvnicNewCfgGroupRemKey | 1.3.6.1.4.1.20301.2.7.15.16.10.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Remove the uplink LACP trunk from the vNIC group. other(1) is returned always when read. The following values are writable: delete(2)...to delete the uplink LACP trunk from the vNIC group
| ||||
| CvnicNewCfgGroupDelete | 1.3.6.1.4.1.20301.2.7.15.16.10.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the vNIC group. other(1) is returned always when read. The following values are writable: delete(2)...to delete the vNIC group
| ||||
| CvnicNewCfgGroupVnics | 1.3.6.1.4.1.20301.2.7.15.16.10.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current The vNICs in the vNIC group. | ||||
| CvnicNewCfgGroupPorts | 1.3.6.1.4.1.20301.2.7.15.16.10.1.15 | DisplayString | RO | |
column · DisplayString · read-only · current Non-vNIC Ports and/or uplink port in the vNIC group. | ||||
| CvnicNewCfgGroupTrunk | 1.3.6.1.4.1.20301.2.7.15.16.10.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Uplink trunk in the vNIC group. | ||||
| CvnicNewCfgGroupKey | 1.3.6.1.4.1.20301.2.7.15.16.10.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Uplink LACP admin key in the vNIC group. | ||||
| IibmGbTORG8264CSMIB | 1.3.6.1.4.1.20301.3 | |||
identity MIB for IBM Networking Operating System RackSwitch G8264CS All Rights reserved DEVICE VERSION: 7.8.10.0 | ||||
| Nibmnos-BladeSwitch | 1.3.6.1.4.1.20301.100 | |||
| Nibmnoscfa | 1.3.6.1.4.1.20301.100.27 | |||
| Nif | 1.3.6.1.4.1.20301.100.27.1 | |||
| TifMainTable | 1.3.6.1.4.1.20301.100.27.1.4 | NA | ||
table · not-accessible · current A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a proprietary extension to the standard ifTable and ifXTable. The index to this table has the semantics of the MIB-2 ifIndex. | ||||
| RifMainEntry | 1.3.6.1.4.1.20301.100.27.1.4.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to a particular interface.
| ||||
| CifMainIndex | 1.3.6.1.4.1.20301.100.27.1.4.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable. | ||||
| CifMainPortName | 1.3.6.1.4.1.20301.100.27.1.4.1.9 | DisplayString | RW | |
column · DisplayString · read-write · current This is used to assign a alias to a port | ||||
| Nibmnos | 1.3.6.1.4.1.20301.100.81 | |||
| NibmnosSystem | 1.3.6.1.4.1.20301.100.81.1 | |||
| SibmnosConfigSaveOption | 1.3.6.1.4.1.20301.100.81.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies whether the configurations of the switch has to be saved or not. The value 'noSave' specifies that the configurations need not be saved. The value 'flashSave' specifies that the configurations need to be saved in flash in the specified file name issConfigSaveFileName. The value 'remoteSave' specifies that the configurations need to be saved in specified remote system. The value 'startupConfig' specifies that the configurations need to be saved in flash in the 'Startup Configuration File'. The value 'backupConfig' specifies that the configurations need to be saved in flash in the 'backup Configuration File'. The value 'remoteTftpRestore' specifies that the configurations need to be restored from remote system and saved in the file as indicated by 'ibmnosConfigRemoteType'. This configuration are copied to configuration blocks and applied after restart.
| ||||
| SibmnosConfigSaveFileName | 1.3.6.1.4.1.20301.100.81.1.12 | DisplayString (SIZE (1..128)) | RW | |
scalar · DisplayString (SIZE (1..128)) · read-write · current Name of the file in which the switch configurations are to be saved. This object is valid only if 'issConfigSaveOption' is chosen to be 'flashSave' or 'remoteSave'. | ||||
| SibmnosInitiateConfigSave | 1.3.6.1.4.1.20301.100.81.1.13 | TruthValue | RW | |
scalar · TruthValue · read-write · current When set as 'true' switch configurations save operation is initiated. As soon as the configuration save operation is completed, the value of this object reverts back to 'false'. All the configurations made via the three interfaces viz. -> commandline interface -> Web Interface -> SNMP interface are saved either in 'Startup Configuration File' in the flash or in the specified 'issConfigSaveFileName' in the flash or in the chosen remote system, depending upon 'ConfigSaveOption'. | ||||
| SibmnosConfigSaveStatus | 1.3.6.1.4.1.20301.100.81.1.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of configuration save operation.
| ||||
| SibmnosConfigRestoreOption | 1.3.6.1.4.1.20301.100.81.1.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies whether the switch configurations have to be restored or not. The value 'factory' specifies that the switch configurations need not be restored when the system is restarted. The value 'activeConfig' specifies that the configurations need to be restored from the 'Startup Configuration File' in the flash when the system is restarted. The value 'backupConfig' specifies that the configurations need to be restored from the 'Backup Configuration File' in the flash when the system is restarted.
| ||||
| SibmnosLoggingOption | 1.3.6.1.4.1.20301.100.81.1.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Logging option specifying whether the logging is to be done at console or to a file(system buffer) in the system.
| ||||
| SibmnosLoginAuthentication | 1.3.6.1.4.1.20301.100.81.1.32 | INTEGER | RW | |
scalar · INTEGER · read-write · current The mechanism by which the user login to access the GUI for configuration has to be authenticated. Authentication is done either locally or in the remote side through a RADIUS Server.
| ||||
| SibmnosConfigRestoreFileVersion | 1.3.6.1.4.1.20301.100.81.1.40 | DisplayString (SIZE (1..12)) | RO | |
scalar · DisplayString (SIZE (1..12)) · read-only · current Config Restoration file version. This version will be compared in each reboot against version stored in restoration file. Restoration will occur only if the first field in restoration file is this OID and the RestoreFileVersion value also matches. | ||||
| NibmnosConfigControl | 1.3.6.1.4.1.20301.100.81.2 | |||
| TibmnosPortCtrlTable | 1.3.6.1.4.1.20301.100.81.2.2 | NA | ||
table · not-accessible · current A table to control the port specific parameters of the device like speed, duplex mode, etc. | ||||
| RibmnosPortCtrlEntry | 1.3.6.1.4.1.20301.100.81.2.2.1 | NA | ||
row · not-accessible · current An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
| ||||
| CibmnosPortCtrlIndex | 1.3.6.1.4.1.20301.100.81.2.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Interface index of the port for which the configuration in this entry applies. | ||||
| CibmnosPortCtrlMode | 1.3.6.1.4.1.20301.100.81.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates with the port on the other end of the link for data transfer operation as 'full-duplex' or 'half-duplex' and about flow contol. If set as 'nonegotiation', the configured values for interface speed, duplex mode and flow control will be effective.
| ||||
| CibmnosPortCtrlDuplex | 1.3.6.1.4.1.20301.100.81.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value 'any'
| ||||
| CibmnosPortCtrlSpeed | 1.3.6.1.4.1.20301.100.81.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value 'any'
| ||||
| CibmnosPortCtrlFlowControl | 1.3.6.1.4.1.20301.100.81.2.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer
| ||||
| Ntoraddon | 1.3.6.1.4.1.20301.100.100 | |||
| Ncfa | 1.3.6.1.4.1.20301.100.100.2 | |||
| TibmnosPortCfgTable | 1.3.6.1.4.1.20301.100.100.2.1 | NA | ||
table · not-accessible · current The table of port configuration in the new_configuration block. | ||||
| RibmnosPortCfgTableEntry | 1.3.6.1.4.1.20301.100.100.2.1.1 | NA | ||
row · not-accessible · current A row in the port configuration table in the new_configuration block.
| ||||
| CibmnosPortCfgIndx | 1.3.6.1.4.1.20301.100.100.2.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index of the row in port configurations table. | ||||
| CibmnosPortCfgVlanTag | 1.3.6.1.4.1.20301.100.100.2.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current VLAN tag configured for the port
| ||||
| Nsys | 1.3.6.1.4.1.20301.100.100.7 | |||
| SagImageForNextReset | 1.3.6.1.4.1.20301.100.100.7.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2
| ||||
| NibmnosFdb | 1.3.6.1.4.1.20301.100.100.13 | |||
| TibmnosFdbTable | 1.3.6.1.4.1.20301.100.100.13.5 | NA | ||
table · not-accessible · current The table of FDB entries. | ||||
| RibmnosFdbEntry | 1.3.6.1.4.1.20301.100.100.13.5.1 | NA | ||
| CibmnosFdbVlan | 1.3.6.1.4.1.20301.100.100.13.5.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The VLAN ID for the FDB entry. | ||||
| CibmnosFdbMacAddr | 1.3.6.1.4.1.20301.100.100.13.5.1.2 | PhysAddress | NA | |
column · PhysAddress · not-accessible · current The MAC address for the FDB entry. | ||||
| CibmnosFdbMacAddrStr | 1.3.6.1.4.1.20301.100.100.13.5.1.3 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The MAC address in hex format for the FDB entry. This node is added for display purpose. | ||||
| CibmnosFdbVlanId | 1.3.6.1.4.1.20301.100.100.13.5.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN ID for the FDB entry. This node is added for display purpose. | ||||
| CibmnosFdbSrcPort | 1.3.6.1.4.1.20301.100.100.13.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address. | ||||
| CibmnosFdbSrcTrunk | 1.3.6.1.4.1.20301.100.100.13.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk. | ||||
| CibmnosFdbState | 1.3.6.1.4.1.20301.100.100.13.5.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group
| ||||
| CibmnosFdbStatus | 1.3.6.1.4.1.20301.100.100.13.5.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current '1' if it is permanent '0' if it is not permanent | ||||
| CibmnosFdbClearMac | 1.3.6.1.4.1.20301.100.100.13.5.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(2) clears the corresponding table entry in FDB.
| ||||
| Ntor-switch | 1.3.6.1.4.1.20301.100.100.14 | |||
| ShardwarePartNumber | 1.3.6.1.4.1.20301.100.100.14.1 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The hardware part number of the Blade Switch. | ||||
| ShardwareRevision | 1.3.6.1.4.1.20301.100.100.14.2 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The hardware revision. If the revision is not available, a zero length string should be returned. | ||||
| ShardwareLastBoot | 1.3.6.1.4.1.20301.100.100.14.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Reason of the last boot.
| ||||
| ShardwareMACAddress | 1.3.6.1.4.1.20301.100.100.14.4 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The MAC address. | ||||
| ShardwareSwitchRunningSwVersion | 1.3.6.1.4.1.20301.100.100.14.5 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The switch software version. | ||||
| ShardwareFlashConfiguration | 1.3.6.1.4.1.20301.100.100.14.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current The active flash configuration.
| ||||
| ShardwarePCBAPartNumber | 1.3.6.1.4.1.20301.100.100.14.7 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The PCBA part number. | ||||
| ShardwareFABNumber | 1.3.6.1.4.1.20301.100.100.14.8 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current FAB Number | ||||
| ShardwareSerialNumber | 1.3.6.1.4.1.20301.100.100.14.9 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The switch serial number. | ||||
| ShardwareManufacturingDate | 1.3.6.1.4.1.20301.100.100.14.10 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The date of manufacturing. | ||||
| ShwTemperatureSensor1 | 1.3.6.1.4.1.20301.100.100.14.11 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The temperature sensor 1. | ||||
| ShwTemperatureSensor2 | 1.3.6.1.4.1.20301.100.100.14.12 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The temperature sensor 2. | ||||
| ShwTemperatureSensor3 | 1.3.6.1.4.1.20301.100.100.14.13 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The temperature sensor 3. | ||||
| ShwFan1RPMValue | 1.3.6.1.4.1.20301.100.100.14.14 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The Fan 1 RPM value. | ||||
| ShwFan2RPMValue | 1.3.6.1.4.1.20301.100.100.14.15 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The Fan 2 RPM value. | ||||
| ShwFan3RPMValue | 1.3.6.1.4.1.20301.100.100.14.16 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The Fan 3 RPM value. | ||||
| ShwFan4RPMValue | 1.3.6.1.4.1.20301.100.100.14.17 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The Fan 4 RPM value. | ||||
| ShwFan5RPMValue | 1.3.6.1.4.1.20301.100.100.14.18 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The Fan 5 RPM value. | ||||
| ShwBoardRevision | 1.3.6.1.4.1.20301.100.100.14.19 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The Board revision number. | ||||
| ShwPowerSupply1State | 1.3.6.1.4.1.20301.100.100.14.20 | INTEGER | RO | |
scalar · INTEGER · read-only · current The Power Supply 1 state.
| ||||
| ShwPowerSupply2State | 1.3.6.1.4.1.20301.100.100.14.21 | INTEGER | RO | |
scalar · INTEGER · read-only · current The Power Supply 2 state.
| ||||
| TibmnosSfpInfoTable | 1.3.6.1.4.1.20301.100.100.14.22 | NA | ||
table · not-accessible · current The table of external port SFP information. | ||||
| RibmnosSfpInfoTableEntry | 1.3.6.1.4.1.20301.100.100.14.22.1 | NA | ||
row · not-accessible · current A row in the external port SFP information table.
| ||||
| CibmnosSfpInfoIndx | 1.3.6.1.4.1.20301.100.100.14.22.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Sfp Info index (port number) | ||||
| CibmnosSfpInfoDescription | 1.3.6.1.4.1.20301.100.100.14.22.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))
| ||||
| CibmnosSfpInfoSerialNumber | 1.3.6.1.4.1.20301.100.100.14.22.1.3 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current Serial Number. | ||||
| CibmnosSfpInfoPartNumber | 1.3.6.1.4.1.20301.100.100.14.22.1.4 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current Part Number. | ||||
| CibmnosSfpInfoHWRevision | 1.3.6.1.4.1.20301.100.100.14.22.1.5 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current Hardware Revision | ||||
| SswImage1Version | 1.3.6.1.4.1.20301.100.100.14.24 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current Software image1 version | ||||
| SswImage2Version | 1.3.6.1.4.1.20301.100.100.14.25 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current Software image2 version | ||||
| SswBootVersion | 1.3.6.1.4.1.20301.100.100.14.26 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current Software boot version | ||||
| ShwFan6RPMValue | 1.3.6.1.4.1.20301.100.100.14.27 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The Fan 6 RPM value. | ||||
| ShwTemperatureSensor4 | 1.3.6.1.4.1.20301.100.100.14.32 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The temperature sensor 4. | ||||
| ShwFan7RPMValue | 1.3.6.1.4.1.20301.100.100.14.40 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The Fan 7 RPM value. | ||||
| ShwFan8RPMValue | 1.3.6.1.4.1.20301.100.100.14.41 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The Fan 8 RPM value. | ||||
| NibmnosBladeHarmony | 1.3.6.1.4.1.20301.100.100.17 | |||
| NdataCollection | 1.3.6.1.4.1.20301.100.100.17.1 | |||
| SibmnosPortTableMaxEnt | 1.3.6.1.4.1.20301.100.100.17.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the port configuration host table. | ||||
| SibmnosImage1Ver | 1.3.6.1.4.1.20301.100.100.17.1.3 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SibmnosImage2Ver | 1.3.6.1.4.1.20301.100.100.17.1.4 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| ShwSwitchSoftwareVersion | 1.3.6.1.4.1.20301.100.100.17.1.5 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The switch software version. | ||||
| ShwSerialNum | 1.3.6.1.4.1.20301.100.100.17.1.6 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The switch serial number. | ||||
| ShwManufacturingDate | 1.3.6.1.4.1.20301.100.100.17.1.7 | DisplayString (SIZE (0..48)) | RO | |
scalar · DisplayString (SIZE (0..48)) · read-only · current The date of manufacturing. | ||||
| SibmnosReset | 1.3.6.1.4.1.20301.100.100.17.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to reboot the agent. other(1) is returned always when read.
| ||||
| SibmnosBootVer | 1.3.6.1.4.1.20301.100.100.17.1.9 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. | ||||
| SibmnosConfigForNxtReset | 1.3.6.1.4.1.20301.100.100.17.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block
| ||||
| SibmnosSoftwareVersion | 1.3.6.1.4.1.20301.100.100.17.1.11 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available. | ||||
| NimageConfigTransfer | 1.3.6.1.4.1.20301.100.100.17.3 | |||
| SagTftpServer | 1.3.6.1.4.1.20301.100.100.17.3.1 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The TFTP server IP address or domain name. | ||||
Textual conventions
IPsecKeyStringOCTET STRING (SIZE (0..1024))Display hint:
1024aRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length.PortNumberUnsigned32Represents a port number of a switch.
TimeoutInteger32Display hint:
d4Time out value in 4 byte
VlanIdInteger32 (1..4094)Display hint:
dA 12-bit VLAN ID used in the VLAN Tag header.
Traps / Notifications
- sw8021x
1.3.6.1.4.1.20301.2.7.15.7.0.158 - swAcntLocked
1.3.6.1.4.1.20301.2.7.15.7.0.164 - swAcntStrngPswdNotMet
1.3.6.1.4.1.20301.2.7.15.7.0.163 - swAcntUnlocked
1.3.6.1.4.1.20301.2.7.15.7.0.165 - swApplyComplete
1.3.6.1.4.1.20301.2.7.15.7.0.27 - swCistNewRoot
1.3.6.1.4.1.20301.2.7.15.7.0.43 - swCistTopologyChanged
1.3.6.1.4.1.20301.2.7.15.7.0.45 - swDefAdminDisable
1.3.6.1.4.1.20301.2.7.15.7.0.162 - swDefGwDown
1.3.6.1.4.1.20301.2.7.15.7.0.3 - swDefGwInService
1.3.6.1.4.1.20301.2.7.15.7.0.4 - swDefGwNotInService
1.3.6.1.4.1.20301.2.7.15.7.0.5 - swDefGwUp
1.3.6.1.4.1.20301.2.7.15.7.0.2 - swECMPGatewayDown
1.3.6.1.4.1.20301.2.7.15.7.0.66 - swECMPGatewayUp
1.3.6.1.4.1.20301.2.7.15.7.0.65 - swFanFailure
1.3.6.1.4.1.20301.2.7.15.7.0.24 - swFanFailureFixed
1.3.6.1.4.1.20301.2.7.15.7.0.33 - swFcZoneErr
1.3.6.1.4.1.20301.2.7.15.7.0.169 - swFwDownloadFailure
1.3.6.1.4.1.20301.2.7.15.7.0.30 - swFwDownloadSucess
1.3.6.1.4.1.20301.2.7.15.7.0.29 - swHotlinksBackupDn
1.3.6.1.4.1.20301.2.7.15.7.0.49 - swHotlinksBackupUp
1.3.6.1.4.1.20301.2.7.15.7.0.48 - swHotlinksMasterDn
1.3.6.1.4.1.20301.2.7.15.7.0.47 - swHotlinksMasterUp
1.3.6.1.4.1.20301.2.7.15.7.0.46 - swHotlinksNone
1.3.6.1.4.1.20301.2.7.15.7.0.50 - swLACPPortBlocked
1.3.6.1.4.1.20301.2.7.15.7.0.71 - swLACPPortUnblocked
1.3.6.1.4.1.20301.2.7.15.7.0.72 - swLFDPortErrdisabled
1.3.6.1.4.1.20301.2.7.15.7.0.103 - swLoginFailure
1.3.6.1.4.1.20301.2.7.15.7.0.19 - swNTPSyncFailed
1.3.6.1.4.1.20301.2.7.15.7.0.61 - swNTPUpdateClock
1.3.6.1.4.1.20301.2.7.15.7.0.62 - swPrimaryPowerSupplyFailure
1.3.6.1.4.1.20301.2.7.15.7.0.1 - swPrimaryPowerSupplyFailureNotify
1.3.6.1.4.1.20301.2.7.15.7.0.1 - swPrimaryPowerSupplyFixed
1.3.6.1.4.1.20301.2.7.15.7.0.97 - swPrimaryPowerSupplyFixedNotify
1.3.6.1.4.1.20301.2.7.15.7.0.97 - swSaveComplete
1.3.6.1.4.1.20301.2.7.15.7.0.28 - swStgNewRoot
1.3.6.1.4.1.20301.2.7.15.7.0.42 - swStgTopologyChanged
1.3.6.1.4.1.20301.2.7.15.7.0.44 - swTeamingCtrlDown
1.3.6.1.4.1.20301.2.7.15.7.0.68 - swTeamingCtrlDownTearDownBlked
1.3.6.1.4.1.20301.2.7.15.7.0.69 - swTeamingCtrlError
1.3.6.1.4.1.20301.2.7.15.7.0.70 - swTeamingCtrlUp
1.3.6.1.4.1.20301.2.7.15.7.0.67 - swTempExceedThreshold
1.3.6.1.4.1.20301.2.7.15.7.0.22 - swTempReturnThreshold
1.3.6.1.4.1.20301.2.7.15.7.0.31 - swVMGroupVMOnline
1.3.6.1.4.1.20301.2.7.15.7.0.78 - swVMGroupVMVlanChange
1.3.6.1.4.1.20301.2.7.15.7.0.79 - swVMGroupVMotion
1.3.6.1.4.1.20301.2.7.15.7.0.77 - swValidLogin
1.3.6.1.4.1.20301.2.7.15.7.0.25 - swValidLogout
1.3.6.1.4.1.20301.2.7.15.7.0.63 - swVlagInstanceDown
1.3.6.1.4.1.20301.2.7.15.7.0.109 - swVlagInstanceLocalUp
1.3.6.1.4.1.20301.2.7.15.7.0.108 - swVlagInstanceRemoteUp
1.3.6.1.4.1.20301.2.7.15.7.0.107 - swVlagInstanceUp
1.3.6.1.4.1.20301.2.7.15.7.0.106 - swVlagIslDown
1.3.6.1.4.1.20301.2.7.15.7.0.111 - swVlagIslUp
1.3.6.1.4.1.20301.2.7.15.7.0.110 - swVrrpAuthFailure
1.3.6.1.4.1.20301.2.7.15.7.0.18 - swVrrpNewBackup
1.3.6.1.4.1.20301.2.7.15.7.0.17 - swVrrpNewMaster
1.3.6.1.4.1.20301.2.7.15.7.0.16