POSEIDON-MIB
HW group s.r.osnmptranslate -m POSEIDON-MIB -Tpsnmpwalk -v2c -c <community> -m POSEIDON-MIB <host> 1.3.6.1.4.1.21796Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nhwgroup | 1.3.6.1.4.1.21796 | ||||||||||||||||||||
| NcharonII | 1.3.6.1.4.1.21796.3 | ||||||||||||||||||||
| Nposeidon | 1.3.6.1.4.1.21796.3.3 | ||||||||||||||||||||
| !inpAlarmStateChanged | 1.3.6.1.4.1.21796.3.3.0.1 | ||||||||||||||||||||
notification Input state entered/left alarm condition. This trap always follows tsTrapAlarmStart/tsTrapAlarmEnd.
| |||||||||||||||||||||
| !sensAlarmStateChanged | 1.3.6.1.4.1.21796.3.3.0.2 | ||||||||||||||||||||
| !tsTrapAlarmStart | 1.3.6.1.4.1.21796.3.3.0.3 | ||||||||||||||||||||
notification This trap is sent each time an alarm is inserted into to the alarm table. It is sent on the insertion of all alarms except for powerFailure.
| |||||||||||||||||||||
| !tsTrapAlarmEnd | 1.3.6.1.4.1.21796.3.3.0.4 | ||||||||||||||||||||
notification This trap is sent each time an alarm is removed from the alarm table. It is sent on the removal of all alarms.
| |||||||||||||||||||||
| TinpTable | 1.3.6.1.4.1.21796.3.3.1 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory A list of binary input entries. | |||||||||||||||||||||
| RinpEntry | 1.3.6.1.4.1.21796.3.3.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory An entry containing information applicable to a particular binary input.
| |||||||||||||||||||||
| CinpIndex | 1.3.6.1.4.1.21796.3.3.1.1.1 | PositiveInteger | RO | mandatory | |||||||||||||||||
column · PositiveInteger · read-only · mandatory The binary input index. | |||||||||||||||||||||
| CinpValue | 1.3.6.1.4.1.21796.3.3.1.1.2 | OnOff | RO | mandatory | 0 | ||||||||||||||||
column · OnOff · read-only · mandatory The binary input value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinpName | 1.3.6.1.4.1.21796.3.3.1.1.3 | IOName | RW | mandatory | Binary 1 | ||||||||||||||||
column · IOName · read-write · mandatory The binary input name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinpAlarmSetup | 1.3.6.1.4.1.21796.3.3.1.1.4 | InputAlarmSetup | RW | mandatory | 0 | ||||||||||||||||
column · InputAlarmSetup · read-write · mandatory You can enable alarm for this binary input. Alarm can be inactive or active for On/Off state. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinpAlarmState | 1.3.6.1.4.1.21796.3.3.1.1.5 | InputAlarmState | RO | mandatory | 0 | ||||||||||||||||
column · InputAlarmState · read-only · mandatory The binary input alarm state. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinpCounter | 1.3.6.1.4.1.21796.3.3.1.1.6 | NonNegativeInteger | RW | mandatory | |||||||||||||||||
column · NonNegativeInteger · read-write · mandatory Number of pulses on this input. Entering edge is used to increment this counter. Only pulses longer than sampling interval are counted. | |||||||||||||||||||||
| ToutTable | 1.3.6.1.4.1.21796.3.3.2 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory A list of binary output entries. | |||||||||||||||||||||
| RoutEntry | 1.3.6.1.4.1.21796.3.3.2.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory An entry containing information applicable to a particular binary output.
| |||||||||||||||||||||
| CoutIndex | 1.3.6.1.4.1.21796.3.3.2.1.1 | PositiveInteger | RO | mandatory | |||||||||||||||||
column · PositiveInteger · read-only · mandatory The binary output index. | |||||||||||||||||||||
| CoutValue | 1.3.6.1.4.1.21796.3.3.2.1.2 | OnOff | RW | mandatory | |||||||||||||||||
column · OnOff · read-write · mandatory The binary output value. 0 off(open), 1 on(close) | |||||||||||||||||||||
| CoutName | 1.3.6.1.4.1.21796.3.3.2.1.3 | IOName | RW | mandatory | |||||||||||||||||
column · IOName · read-write · mandatory The binary output name. | |||||||||||||||||||||
| CoutType | 1.3.6.1.4.1.21796.3.3.2.1.4 | OutputType | RO | mandatory | |||||||||||||||||
column · OutputType · read-only · mandatory The binary output type. 0 relay (off, on), 1 rts (-10,+10V), 2 dtr (0,10V) | |||||||||||||||||||||
| CoutMode | 1.3.6.1.4.1.21796.3.3.2.1.5 | OutputMode | RW | mandatory | |||||||||||||||||
column · OutputMode · read-write · mandatory The binary output mode. 0 manual, 1 autoAlarm, 2 autoTriggerEq, 3 autoTriggerHi, 4 autoTriggerLo | |||||||||||||||||||||
| CoutInit | 1.3.6.1.4.1.21796.3.3.2.1.6 | OnOff | RW | obsolete | |||||||||||||||||
column · OnOff · read-write · obsolete The binary output value after power-up. 0 off(open), 1 on(close) | |||||||||||||||||||||
| TsensTable | 1.3.6.1.4.1.21796.3.3.3 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory A list of sensor table entries. The number of entries corresponds with number of detected sensors. | |||||||||||||||||||||
| RsensEntry | 1.3.6.1.4.1.21796.3.3.3.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory An entry containing information applicable to a particular sensor.
| |||||||||||||||||||||
| CsensIndex | 1.3.6.1.4.1.21796.3.3.3.1.1 | PositiveInteger | RO | mandatory | |||||||||||||||||
column · PositiveInteger · read-only · mandatory The sensor index. | |||||||||||||||||||||
| CsensName | 1.3.6.1.4.1.21796.3.3.3.1.2 | SensorName | RO | mandatory | H.Servidores | ||||||||||||||||
column · SensorName · read-only · mandatory The sensor name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensState | 1.3.6.1.4.1.21796.3.3.3.1.4 | SensorState | RO | mandatory | 1 | ||||||||||||||||
column · SensorState · read-only · mandatory The sensor state. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensString | 1.3.6.1.4.1.21796.3.3.3.1.5 | SensorString | RO | mandatory | 29.6 %RH | ||||||||||||||||
column · SensorString · read-only · mandatory The string representation of sensor value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensValue | 1.3.6.1.4.1.21796.3.3.3.1.6 | SensorValue | RO | mandatory | 296 | ||||||||||||||||
column · SensorValue · read-only · mandatory The integer (decimal * 10) representation of sensor value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensValueRaw | 1.3.6.1.4.1.21796.3.3.3.1.7 | SensorValue | RO | mandatory | 296 | ||||||||||||||||
column · SensorValue · read-only · mandatory The original raw value of sensor (it differs for each sensor type, especially 1-Wire sensors have different precisions). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensID | 1.3.6.1.4.1.21796.3.3.3.1.8 | SensorID | RO | mandatory | 8202 | ||||||||||||||||
column · SensorID · read-only · mandatory The sensor ID. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensUnit | 1.3.6.1.4.1.21796.3.3.3.1.9 | UnitType | RO | mandatory | 3 | ||||||||||||||||
column · UnitType · read-only · mandatory The sensor unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensUnitString | 1.3.6.1.4.1.21796.3.3.3.1.10 | SensorUnitString | RO | mandatory | %RH | ||||||||||||||||
column · SensorUnitString · read-only · mandatory The string representation of sensor unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensPortID | 1.3.6.1.4.1.21796.3.3.3.1.11 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory The sensor port ID. | |||||||||||||||||||||
| Nlog | 1.3.6.1.4.1.21796.3.3.30 | ||||||||||||||||||||
| SlogRecordCount | 1.3.6.1.4.1.21796.3.3.30.1 | PositiveInteger | RO | ||||||||||||||||||
scalar · PositiveInteger · read-only · current The number of already logged records. There are 4 types of log records for RS485 sensors, 1-Wire sensors, inputs and outputs. Every log period is done a log sample, that writes several log records. | |||||||||||||||||||||
| SlogTimeRemain | 1.3.6.1.4.1.21796.3.3.30.2 | LogTimeRemain | RO | ||||||||||||||||||
scalar · LogTimeRemain · read-only · current According to detected sensors and enabled I/O space for log records is computed and remaining logging time is estimated. | |||||||||||||||||||||
| SlogPeriod | 1.3.6.1.4.1.21796.3.3.30.3 | PositiveInteger | RW | ||||||||||||||||||
scalar · PositiveInteger · read-write · current The time between two log samples [s]. | |||||||||||||||||||||
| SlogIOEnabled | 1.3.6.1.4.1.21796.3.3.30.4 | OnOff | RW | ||||||||||||||||||
scalar · OnOff · read-write · current Log also binary Inputs and Outputs. If enabled, every log sample adds additional records for I/O. If disabled, only 1-Wire and RSxxx sensors are logged. | |||||||||||||||||||||
| SlogCmd | 1.3.6.1.4.1.21796.3.3.30.5 | LogCmd | WO | ||||||||||||||||||
scalar · LogCmd · write-only · current Log control commands. You can erase log by writing to this variable. | |||||||||||||||||||||
| NtsAlarm | 1.3.6.1.4.1.21796.3.3.50 | ||||||||||||||||||||
| StsAlarmsPresent | 1.3.6.1.4.1.21796.3.3.50.1 | Gauge | RO | mandatory | |||||||||||||||||
scalar · Gauge · read-only · mandatory The present number of active alarm conditions. | |||||||||||||||||||||
| TtsAlarmTable | 1.3.6.1.4.1.21796.3.3.50.2 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory A list of alarm table entries. The table contains zero, one, or many rows at any moment, depending upon the number of alarm conditions in effect. The table is initially empty at agent startup. The agent creates a row in the table each time a condition is detected and deletes that row when that condition no longer pertains. The agent creates the first row with tsAlarmId equal to 1, and increments the value of tsAlarmId each time a new row is created, wrapping to the first free value greater than or equal to 1 when the maximum value of tsAlarmId would otherwise be exceeded. Consequently, after multiple operations, the table may become sparse, e.g., containing entries for rows 95, 100, 101, and 203 and the entries should not be assumed to be in chronological order because tsAlarmId might have wrapped. The number of rows in the table at any given time is reflected by the value of tsAlarmsPresent. | |||||||||||||||||||||
| RtsAlarmEntry | 1.3.6.1.4.1.21796.3.3.50.2.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory An entry containing information applicable to a particular alarm.
| |||||||||||||||||||||
| CtsAlarmIdx | 1.3.6.1.4.1.21796.3.3.50.2.1.1 | PositiveInteger | RO | mandatory | |||||||||||||||||
column · PositiveInteger · read-only · mandatory An index to alarm table. | |||||||||||||||||||||
| CtsAlarmId | 1.3.6.1.4.1.21796.3.3.50.2.1.2 | PositiveInteger | RO | mandatory | |||||||||||||||||
column · PositiveInteger · read-only · mandatory A unique identifier for an alarm condition. This value must remain constant. | |||||||||||||||||||||
| CtsAlarmDescr | 1.3.6.1.4.1.21796.3.3.50.2.1.3 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory Description of the alarm condition.
| |||||||||||||||||||||
| CtsAlarmSensName | 1.3.6.1.4.1.21796.3.3.50.2.1.4 | SensorName | RO | mandatory | |||||||||||||||||
column · SensorName · read-only · mandatory Name of sensor with alarm condition. | |||||||||||||||||||||
| CtsAlarmTime | 1.3.6.1.4.1.21796.3.3.50.2.1.5 | TimeStamp | RO | mandatory | |||||||||||||||||
column · TimeStamp · read-only · mandatory The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of tsAlarmTime shall equal 0. | |||||||||||||||||||||
| Ninfo | 1.3.6.1.4.1.21796.3.3.70 | ||||||||||||||||||||
| SinfoAddressMAC | 1.3.6.1.4.1.21796.3.3.70.1 | DisplayString (SIZE (0..17)) | RO | mandatory | |||||||||||||||||
scalar · DisplayString (SIZE (0..17)) · read-only · mandatory MAC address in text form. It is here to distinguish devices in trap messages. | |||||||||||||||||||||
| Nsetup | 1.3.6.1.4.1.21796.3.3.99 | ||||||||||||||||||||
| NsensSetup | 1.3.6.1.4.1.21796.3.3.99.1 | ||||||||||||||||||||
| SunitType | 1.3.6.1.4.1.21796.3.3.99.1.1 | UnitType | RW | mandatory | |||||||||||||||||
scalar · UnitType · read-write · mandatory Units for displayed values. All setup values are fixed in Celsius | |||||||||||||||||||||
| TsensSetupTable | 1.3.6.1.4.1.21796.3.3.99.1.2 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory A list of sensor table setup entries. The number of entries corresponds with number of detected sensors. | |||||||||||||||||||||
| RsensSetupEntry | 1.3.6.1.4.1.21796.3.3.99.1.2.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory An entry containing setup information for a particular sensor.
| |||||||||||||||||||||
| CsensSetupIndex | 1.3.6.1.4.1.21796.3.3.99.1.2.1.1 | PositiveInteger | RO | mandatory | |||||||||||||||||
column · PositiveInteger · read-only · mandatory The sensor setup table index. | |||||||||||||||||||||
| CsensSetupName | 1.3.6.1.4.1.21796.3.3.99.1.2.1.2 | SensorName | RW | mandatory | |||||||||||||||||
column · SensorName · read-write · mandatory The sensor name. | |||||||||||||||||||||
| CsensFlags | 1.3.6.1.4.1.21796.3.3.99.1.2.1.5 | SensorFlags | RW | mandatory | |||||||||||||||||
column · SensorFlags · read-write · mandatory The behaviour of sensor - 0x01: range or level detection - 0x02: enable trap sending -- 0x04: output set (thermostat) - 0x08: sensor enabled - 0x10: enable SMS sending - 0x20: enable email sending. | |||||||||||||||||||||
| CsensLimitMin | 1.3.6.1.4.1.21796.3.3.99.1.2.1.6 | SensorValue | RW | mandatory | |||||||||||||||||
column · SensorValue · read-write · mandatory The sensor low limit. | |||||||||||||||||||||
| CsensLimitMax | 1.3.6.1.4.1.21796.3.3.99.1.2.1.7 | SensorValue | RW | mandatory | |||||||||||||||||
column · SensorValue · read-write · mandatory The sensor high limit. | |||||||||||||||||||||
| CsensHysteresis | 1.3.6.1.4.1.21796.3.3.99.1.2.1.8 | SensorValue | RW | mandatory | |||||||||||||||||
column · SensorValue · read-write · mandatory The sensor hysteresis. | |||||||||||||||||||||
Traps / Notifications
- inpAlarmStateChanged
1.3.6.1.4.1.21796.3.3.0.1 - sensAlarmStateChanged
1.3.6.1.4.1.21796.3.3.0.2 - tsTrapAlarmEnd
1.3.6.1.4.1.21796.3.3.0.4 - tsTrapAlarmStart
1.3.6.1.4.1.21796.3.3.0.3