OPTIX-MISC-MIB
HUAWEI Technology Co.,LtdThis mib specifies the general configuration information of device
snmptranslate -m OPTIX-MISC-MIB -Tpsnmpwalk -v2c -c <community> -m OPTIX-MISC-MIB <host> 1.3.6.1.4.1.2011.2.25.4.30.39Imports
| OPTIX-OID-MIB | optixProvisionEqpt |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IoptixMisc | 1.3.6.1.4.1.2011.2.25.4.30.39 | ||||||||||||
identity This mib specifies the general configuration information of device | |||||||||||||
| NoptixMiscGroup | 1.3.6.1.4.1.2011.2.25.4.30.39.1 | ||||||||||||
| SoptixFanSpeed | 1.3.6.1.4.1.2011.2.25.4.30.39.1.1 | INTEGER | RW | low(1) | |||||||||
scalar · INTEGER · read-write · current This object indicates the fan speed. 4: stop, 1: low, 2: mid, 3: high, 5: autolow, 6: automid, 7: autohigh, 9: auto
Example values from LibreNMS test devices
| |||||||||||||
| SoptixFanMinDispersion | 1.3.6.1.4.1.2011.2.25.4.30.39.1.2 | Unsigned32 | RO | 45 | |||||||||
scalar · Unsigned32 · read-only · current This object indicates the minimum temperature difference allowed by the fan. 0: stop, 45: low, 58: mid, 65: high, 58: auto Example values from LibreNMS test devices
| |||||||||||||
| ToptixEnvironmentTable | 1.3.6.1.4.1.2011.2.25.4.30.39.1.3 | NA | |||||||||||
table · not-accessible · current This table describes the device environmentconfigurations. | |||||||||||||
| RoptixEnvironmentEntry | 1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1 | NA | |||||||||||
row · not-accessible · current Thisentry describes the device environment configurations.
| |||||||||||||
| CoptixEnvironmentBdId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates theslot IDof the board that supports environment configurations. | |||||||||||||
| CoptixRelayControlMode | 1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the relay control mode. 0: pmuauto, 1: pmumanual
| |||||||||||||
| CoptixRelayNormalAlmState | 1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the general relay alarm status. 0: close, 1: open
| |||||||||||||
| CoptixRelaySeriousAlmState | 1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates theserious relay alarm status. 0: close, 1: open
| |||||||||||||
| ToptixRelayTable | 1.3.6.1.4.1.2011.2.25.4.30.39.1.4 | NA | |||||||||||
table · not-accessible · current This table indicates the relay configuration information. | |||||||||||||
| RoptixRelayEntry | 1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1 | NA | |||||||||||
row · not-accessible · current Thisentry indicates the relay configuration information. | |||||||||||||
| CoptixRelayId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates the ID of the relay connected to each board. | |||||||||||||
| CoptixRelayUseState | 1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the relayusage status. 0: disable, 1: enable
| |||||||||||||
| CoptixRelayAlmSwitchState | 1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch status of relay alarms. 0: close, 1: open
| |||||||||||||
| CoptixRelayAlmLevel | 1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the alarm level. 0: critical, 1: major, 2: minor, 3: ignore
| |||||||||||||
| CoptixRelayOutState | 1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the out state. 0: close, 1: open
| |||||||||||||
| ToptixAlmOutputTable | 1.3.6.1.4.1.2011.2.25.4.30.39.1.5 | NA | |||||||||||
table · not-accessible · current This table describes the alarm output information. | |||||||||||||
| RoptixAlmOutputEntry | 1.3.6.1.4.1.2011.2.25.4.30.39.1.5.1 | NA | |||||||||||
row · not-accessible · current Thisentry describes the alarm output information. | |||||||||||||
| CoptixAlmOutputLevel | 1.3.6.1.4.1.2011.2.25.4.30.39.1.5.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the alarm output level. 1: critical, 2: major, 3: minor, 4: ignore
| |||||||||||||
| CoptixAlmOutputNum | 1.3.6.1.4.1.2011.2.25.4.30.39.1.5.1.2 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object indicates the alarm output channel ID. 1: the first output channel, 2: the second output channel, 3: the third output channel, 4: the forth output channel | |||||||||||||
| ToptixRelayNameTable | 1.3.6.1.4.1.2011.2.25.4.30.39.1.6 | NA | |||||||||||
table · not-accessible · current This table describes the relay name. | |||||||||||||
| RoptixRelayNameEntry | 1.3.6.1.4.1.2011.2.25.4.30.39.1.6.1 | NA | |||||||||||
row · not-accessible · current Thisentry describes the relay name. | |||||||||||||
| CoptixRelayType | 1.3.6.1.4.1.2011.2.25.4.30.39.1.6.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the relay type. 0: all, 1: input, 2: ext
| |||||||||||||
| CoptixRelayName | 1.3.6.1.4.1.2011.2.25.4.30.39.1.6.1.2 | OCTET STRING (SIZE (0..21)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..21)) · read-write · current This object indicates the relay name. | |||||||||||||
| ToptixOamPortMngTable | 1.3.6.1.4.1.2011.2.25.4.30.39.1.7 | NA | |||||||||||
table · not-accessible · current This table describes the OAM port configurations on devices. | |||||||||||||
| RoptixOamPortMngEntry | 1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1 | NA | |||||||||||
row · not-accessible · current This entry describes the OAM port configurations on devices. | |||||||||||||
| CoptixOamBdId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates the slot ID of the communication board. | |||||||||||||
| CoptixOamSubBdId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.2 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates the subboard ID of the communication board. This parameter takes a fixed value of 255. | |||||||||||||
| CoptixOamPortId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.3 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates the port number of the communication board. | |||||||||||||
| CoptixOamPortType | 1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the OAM port type. 0: all, 1: com, 2: eth, 3: oam, 4: fF, 5: ext, 6: usb
| |||||||||||||
| CoptixOamPortState | 1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the OAM port status. 0: close, 1: open
| |||||||||||||
| ToptixCommuMngTable | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8 | NA | |||||||||||
table · not-accessible · current This table describes the configurations of communication boards on devices. | |||||||||||||
| RoptixCommuMngEntry | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1 | NA | |||||||||||
row · not-accessible · current Thisentry describes the configurations of communication boards on devices. | |||||||||||||
| CoptixCommuBdId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates the slot ID of the communication board. | |||||||||||||
| CoptixCommuSubBdId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.2 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates the subboard ID of the communication board. This parameter takes a fixed value of 255. | |||||||||||||
| CoptixCommuPortId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.3 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates the port number of the communication board. | |||||||||||||
| CoptixEthPortAdaptMode | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the adaptation mode of the ETH port. 0: fixed, 1: adapt
| |||||||||||||
| CoptixEthPortAdaptSpeed | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the speed mode of the ETH port. 1: snmp100m, 0: snmp10m, 254: commufail, 255: inautonego
| |||||||||||||
| CoptixEthPortAdaptDuplex | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the transmission modeof the ETH port. 1: full, 0: half, 254: commufail, 255: inautonego
| |||||||||||||
| CoptixCommuRealMode | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the real working mode of the ETH port. 0: fixed, 1: adapt
| |||||||||||||
| CoptixCommuRealSpeed | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the real speed mode of the ETH port. 1: snmp100m, 0: snmp10m, 254: commufail, 255: inautonego
| |||||||||||||
| CoptixCommuRealDuplex | 1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the real transmission modeof the ETH port. 1: full, 0: half, 254: commufail, 255: inautonego
| |||||||||||||
| ToptixPowerMonstateTable | 1.3.6.1.4.1.2011.2.25.4.30.39.1.9 | NA | |||||||||||
table · not-accessible · current This table describes the power input monitoring enable status of the power board. | |||||||||||||
| RoptixPowerMonstateEntry | 1.3.6.1.4.1.2011.2.25.4.30.39.1.9.1 | NA | |||||||||||
row · not-accessible · current This entry describes the power input monitoring enable status of the power board. | |||||||||||||
| CoptixPowerMonstateSlotId | 1.3.6.1.4.1.2011.2.25.4.30.39.1.9.1.1 | Unsigned32 (0..65536) | NA | ||||||||||
column · Unsigned32 (0..65536) · not-accessible · current This parameter indicates the slot ID of the power board. | |||||||||||||
| CoptixPowerMonstatePort | 1.3.6.1.4.1.2011.2.25.4.30.39.1.9.1.2 | Unsigned32 (1..2) | NA | ||||||||||
column · Unsigned32 (1..2) · not-accessible · current This parameter indicates the power interface. Value range: 1: First power input 2: Second power input | |||||||||||||
| CoptixPowerMonstateState | 1.3.6.1.4.1.2011.2.25.4.30.39.1.9.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This parameter indicates the enable status of power input monitoring.
| |||||||||||||
| NoptixMiscextGroup | 1.3.6.1.4.1.2011.2.25.4.30.39.2 | ||||||||||||
| SoptixFanSpeedext | 1.3.6.1.4.1.2011.2.25.4.30.39.2.1 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the fan speed. | |||||||||||||