NQA-MIB
HUAWEI Technology Co.,LtdModify description at 2023-02-06.
snmptranslate -m NQA-MIB -Tpsnmpwalk -v2c -c <community> -m NQA-MIB <host> 1.3.6.1.4.1.2011.5.25.111Imports
| HUAWEI-ETHOAM-MIB | HWDot1agCfmEgressActionFieldValue, HWDot1agCfmIngressActionFieldValue, HWDot1agCfmRelayActionFieldValue |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| IEEE802171-CFM-MIB | Dot1agCfmMaintAssocName, Dot1agCfmMaintDomainName, Dot1agCfmMepIdOrZero |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType, InetPortNumber |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2 |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inqa | 1.3.6.1.4.1.2011.5.25.111 | ||||||||||||
identity Modify description at 2023-02-06. | |||||||||||||
| NnqaBase | 1.3.6.1.4.1.2011.5.25.111.1 | ||||||||||||
| SnqaVersion | 1.3.6.1.4.1.2011.5.25.111.1.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The NQA version (for example, 1.1). It can be used for version management. | |||||||||||||
| SnqaEnable | 1.3.6.1.4.1.2011.5.25.111.1.2 | EnableValue | RW | ||||||||||
scalar · EnableValue · read-write · current Indicates the switch of enabling NQA client. (The value range: enable:1; disable:2. The default value is enable(1)) | |||||||||||||
| SnqaReset | 1.3.6.1.4.1.2011.5.25.111.1.3 | EnableValue | RW | ||||||||||
scalar · EnableValue · read-write · current Clears all the enabled test configurations. (The value range: enable:1; disable:2. The default value is disable(2)) | |||||||||||||
| SnqaTimeOfLastSetError | 1.3.6.1.4.1.2011.5.25.111.1.4 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The time of the last configuration error. (0 indicates that the configuration does not fail). | |||||||||||||
| SnqaLastSetError | 1.3.6.1.4.1.2011.5.25.111.1.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The last configuration error. (0 indicates that the configuration does not fail). | |||||||||||||
| SnqaNumOfCurrentCtrlEntry | 1.3.6.1.4.1.2011.5.25.111.1.6 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The total number of current configuration tests. | |||||||||||||
| SnqaMaxConcurrentRequests | 1.3.6.1.4.1.2011.5.25.111.1.7 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current The maximum number of concurrent active requests that are allowed within an agent implementation.
| |||||||||||||
| SnqaMaxNumOfRequests | 1.3.6.1.4.1.2011.5.25.111.1.8 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The maximum number of requests that are allowed within an agent implementation.
| |||||||||||||
| SnqaJitterVersion | 1.3.6.1.4.1.2011.5.25.111.1.9 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Selects the version of jitter test. (The value range: old version:1, new version:2. The default value is old version(1)) | |||||||||||||
| SnqaSupportTestType | 1.3.6.1.4.1.2011.5.25.111.1.10 | Bits | RO | ||||||||||
scalar · Bits · read-only · current Test type that the current device supports.
Data structure of the type is in the format of bits.
Each bit represents a test type.
The mappings between bits and tests are as follows:
icmp(0),
tcp(1),
udp(2),
http(3),
ftp(4),
jitter(5),
snmp(6),
trace(7),
lspPing(8),
lspTrace(9),
dns(10),
dhcp(11),
dlsw(12),
pwe3Ping(13),
pwe3Trace(14),
mPing(15),
mTrace(16),
macPing(17),
macTunnelPing(18),
lspJitter(19),
icmpJitter(20),
pathJitter(21),
pathMtu(22),
pppoe(23),
vplsmPing(24),
vplsmacPing(25),
vplsmacTrace(26),
vplsMTrace(27),
gmacping(28),
gmactrace(29),
mactrace(30),
vplspwping(31),
vplspwtrace(32),
rtptest(36),
rtpsnoop(37),
generalflow(38),
ethernetService(39)
The value #0x00 indicates don't support all testtypes.
| |||||||||||||
| SnqaSupportServerType | 1.3.6.1.4.1.2011.5.25.111.1.11 | Bits | RO | ||||||||||
scalar · Bits · read-only · current Test type that the current device supports. Data structure of the type is in the format of bits. Each bit represents a test type. tcpServer(0), udpServer(1), icmpServer(2), rtpudpServer(3), rtptcpServer(4) The value #0x00 indicates don't support all servertypes.
| |||||||||||||
| SnqaRtptestMaxConcurrentNumber | 1.3.6.1.4.1.2011.5.25.111.1.12 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The maximum number of concurrent active rtptest requests that are allowed within an agent implementation. | |||||||||||||
| SnqaRtpsnoopMaxConcurrentNumber | 1.3.6.1.4.1.2011.5.25.111.1.13 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The maximum number of concurrent active rtpsnoop requests that are allowed within an agent implementation. | |||||||||||||
| SnqaRtpudpMaxConcurrentNumber | 1.3.6.1.4.1.2011.5.25.111.1.14 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The maximum number of concurrent active rtp-udp servers. | |||||||||||||
| SnqaRtptcpMaxConcurrentNumber | 1.3.6.1.4.1.2011.5.25.111.1.15 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The maximum number of concurrent active rtp-tcp servers. | |||||||||||||
| NnqaCtrl | 1.3.6.1.4.1.2011.5.25.111.2 | ||||||||||||
| TnqaAdminCtrlTable | 1.3.6.1.4.1.2011.5.25.111.2.1 | NA | |||||||||||
table · not-accessible · current A table of NQA monitoring definitions. | |||||||||||||
| RnqaAdminCtrlEntry | 1.3.6.1.4.1.2011.5.25.111.2.1.1 | NA | |||||||||||
row · not-accessible · current Defines an entry in the nqaAdminCtrlTable. | |||||||||||||
| CnqaAdminCtrlOwnerIndex | 1.3.6.1.4.1.2011.5.25.111.2.1.1.1 | SnmpAdminString (SIZE (0..32)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-only · current To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'ownerindex'. When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the 'column' subidentifier) up to the end of the encoded owner index. | |||||||||||||
| CnqaAdminCtrlTestName | 1.3.6.1.4.1.2011.5.25.111.2.1.1.2 | SnmpAdminString (SIZE (0..32)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-only · current The name of a test. This is locally unique, within the scope of an nqaAdminCtrlOwnerIndex. | |||||||||||||
| CnqaAdminCtrlTag | 1.3.6.1.4.1.2011.5.25.111.2.1.1.3 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current A string which is the description of the test instance. | |||||||||||||
| CnqaAdminCtrlType | 1.3.6.1.4.1.2011.5.25.111.2.1.1.4 | NqaType | RC | 6 | |||||||||
column · NqaType · read-create · current The type of the test instance. Example values from LibreNMS test devices
| |||||||||||||
| CnqaAdminCtrlFrequency | 1.3.6.1.4.1.2011.5.25.111.2.1.1.5 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Specifies the interval when the test instance repeats.
| |||||||||||||
| CnqaAdminCtrlTimeOut | 1.3.6.1.4.1.2011.5.25.111.2.1.1.6 | Integer32 (1..60) | RC | ||||||||||
column · Integer32 (1..60) · read-create · current Specifies the duration to wait for the completion of test instance. The default value of DHCP-type and FTP-type test instance is 15s, The default value of PPPoE-type test instance is 30s, and that of other types is 3s.
| |||||||||||||
| CnqaAdminCtrlThreshold1 | 1.3.6.1.4.1.2011.5.25.111.2.1.1.7 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Represents the threshold of RTD (Round Trip Delay). If the RTT violates the threshold, the corresponding counter will increase. It applies to any type of test instance. | |||||||||||||
| CnqaAdminCtrlThreshold2 | 1.3.6.1.4.1.2011.5.25.111.2.1.1.8 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Represents the threshold of OWD (One Way Delay) from source to destination. If the OWD violates the threshold, the corresponding counter will increase. It applies only to jitter-type test instances. | |||||||||||||
| CnqaAdminCtrlThreshold3 | 1.3.6.1.4.1.2011.5.25.111.2.1.1.9 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Represents the threshold of OWD (One Way Delay) from destination to source. If the OWD violates the threshold, the corresponding counter will increase. It applies only to jitter-type test instances. | |||||||||||||
| CnqaAdminCtrlStatus | 1.3.6.1.4.1.2011.5.25.111.2.1.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current To set the value of this object can create or delete the specified test instance and the records belonging to it. Before deleting a test instance, the custom must make sure that the status of the test instance is inactive through nqaScheduleOperStatus. The value can be set to 'CreateAndGo (4)', 'Destroy (6)' and 'Active (1)'. | |||||||||||||
| CnqaAdminCtrlJitterThresholdSD | 1.3.6.1.4.1.2011.5.25.111.2.1.1.11 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Represents the threshold of jitter from source to destination. If the jitter violates the threshold, the corresponding counter will increase. It applies only to jitter-type and icmpjitter-type test instances. | |||||||||||||
| CnqaAdminCtrlJitterThresholdDS | 1.3.6.1.4.1.2011.5.25.111.2.1.1.12 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Represents the threshold of jitter from destination to source. If the jitter violates the threshold, the corresponding counter will increase. It applies only to jitter-type and icmpjitter-type test instances. | |||||||||||||
| TnqaAdminParaTable | 1.3.6.1.4.1.2011.5.25.111.2.2 | NA | |||||||||||
table · not-accessible · current Description: nqaAdminParaTable describes how to configure parameters of a test instance. Creation restrictions: None Modification restrictions: None Deletion restrictions: None Access restrictions: None | |||||||||||||
| RnqaAdminParaEntry | 1.3.6.1.4.1.2011.5.25.111.2.2.1 | NA | |||||||||||
row · not-accessible · current set parameter in the nqaAdminParaTable. | |||||||||||||
| CnqaAdminParaTargetAddressType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.1 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Represents the address type of destination. | |||||||||||||
| CnqaAdminParaTargetAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.2 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Represents the address of destination. | |||||||||||||
| CnqaAdminParaTargetPort | 1.3.6.1.4.1.2011.5.25.111.2.2.1.3 | InetPortNumber | RW | ||||||||||
column · InetPortNumber · read-write · current Represents the port number of destination. | |||||||||||||
| CnqaAdminParaSourceAddressType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.4 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Represents the address type of source. | |||||||||||||
| CnqaAdminParaSourceAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.5 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Represents the address of source. | |||||||||||||
| CnqaAdminParaSourcePort | 1.3.6.1.4.1.2011.5.25.111.2.2.1.6 | InetPortNumber | RW | ||||||||||
column · InetPortNumber · read-write · current Represents the port number of source. | |||||||||||||
| CnqaAdminParaMaxTtl | 1.3.6.1.4.1.2011.5.25.111.2.2.1.7 | Unsigned32 (0..255) | RW | ||||||||||
column · Unsigned32 (0..255) · read-write · current Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe.
| |||||||||||||
| CnqaAdminParaInitialTtl | 1.3.6.1.4.1.2011.5.25.111.2.2.1.8 | Unsigned32 (1..255) | RW | ||||||||||
column · Unsigned32 (1..255) · read-write · current Specifies the initial value of TTL. | |||||||||||||
| CnqaAdminParaStorageType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.9 | StorageType | RW | ||||||||||
column · StorageType · read-write · current The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. | |||||||||||||
| CnqaAdminParaMaxFailures | 1.3.6.1.4.1.2011.5.25.111.2.2.1.10 | Unsigned32 (1..255) | RW | ||||||||||
column · Unsigned32 (1..255) · read-write · current The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of 255 (maximum hop count/possible TTL value) indicates that the function of terminating a remote traceroute request when a specific number of successive timeouts are detected is disabled.
| |||||||||||||
| CnqaAdminParaDontFragment | 1.3.6.1.4.1.2011.5.25.111.2.2.1.11 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current This object enables setting of Don't Fragment (DF) flag in the IP header for a probe. Use of this object enables performing a manual PATH MTU test. | |||||||||||||
| CnqaAdminParaDataSize | 1.3.6.1.4.1.2011.5.25.111.2.2.1.12 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The size of data field in packet.
| |||||||||||||
| CnqaAdminParaDataFill | 1.3.6.1.4.1.2011.5.25.111.2.2.1.13 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Represents the characters used for filling the data field. This object is used together with the corresponding object, nqaAdminParaDataSize. | |||||||||||||
| CnqaAdminParaIfIndex | 1.3.6.1.4.1.2011.5.25.111.2.2.1.14 | InterfaceIndexOrZero | RW | ||||||||||
column · InterfaceIndexOrZero · read-write · current Specified the source interface or tunnel, from which probes of the test instance are sent. The value zero implies that the object is disabled. | |||||||||||||
| CnqaAdminParaByPassRouteTable | 1.3.6.1.4.1.2011.5.25.111.2.2.1.15 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the ping/traceroute operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by routed). | |||||||||||||
| CnqaAdminParaMiscOptions | 1.3.6.1.4.1.2011.5.25.111.2.2.1.16 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current Enables an application to specify implementation dependent options. | |||||||||||||
| CnqaAdminParaProbeCount | 1.3.6.1.4.1.2011.5.25.111.2.2.1.17 | Unsigned32 (1..65535) | RW | ||||||||||
column · Unsigned32 (1..65535) · read-write · current Specifies the number of packets sent by the test instance, or times
of probe repeated, in which may send several packets. In the first case,
the range is 1 to 65535 for IAS and 1 to 15 for other products. The second
case applies to jitter-type test instances.
| |||||||||||||
| CnqaAdminParaTrapGeneration | 1.3.6.1.4.1.2011.5.25.111.2.2.1.18 | Bits | RW | ||||||||||
column · Bits · read-write · current Switch of notification. Determine whether and how to send notifications for the test instance: - probeFailure(0) - Generate a PathChange notification when the current path varies from a previously determined path. - testFailure(1) - Generate a TestFailed notification when the full path to a target cannot be determined. - testCompletion(2) - Generate a TestCompleted notification when the path to a target has been determined. - overRtdThreshold(3) - Generate an Overthreshold of RTD notification when the statistic results exceed threshold. - overOwdThresholdSd(4) - Generate an Overthreshold of OWD-SD notification when the statistic results exceed threshold. - overOwdThresholdDs(5) - Generate an Overthreshold of OWD-DS notification when the statistic results exceed threshold. - overJitterThresholdSd(6) - Generate an Overthreshold of Jitter-SD notification when the statistic results exceed threshold. - overJitterThresholdDs(7) - Generate an Overthreshold of Jitter-DS notification when the statistic results exceed threshold. - testResultChange(8) - Generate a TestResultChange notification when test result is changed. - resultChangePacked(9) - Generate a packed trap when test result is changed. No more than two traps will be sent in one second and each trap contains at most ten records. The value #0x00 indicates disable all notifications.
| |||||||||||||
| CnqaAdminParaTrapProbeFailureFilter | 1.3.6.1.4.1.2011.5.25.111.2.2.1.19 | Unsigned32 (1..15) | RW | ||||||||||
column · Unsigned32 (1..15) · read-write · current Specifies the condition when to trigger an nqaProbeFailed notification. When the number of consecutive failed probes violates the threshold indicated by nqaAdminParaTrapProbeFailureFilter, a notification will be created. This object is used together with nqaAdminParaTrapGeneration. | |||||||||||||
| CnqaAdminParaTrapTestFailureFilter | 1.3.6.1.4.1.2011.5.25.111.2.2.1.20 | Unsigned32 (1..15) | RW | ||||||||||
column · Unsigned32 (1..15) · read-write · current Specifies the condition when to trigger an nqaTestFailed notification. When the number of failed tests violates the threshold indicated by nqaAdminParaTrapTestFailureFilter, a notification will be created. There are usually several probes in each test. This object is used together with nqaAdminParaTrapGeneration. | |||||||||||||
| CnqaAdminParaDSField | 1.3.6.1.4.1.2011.5.25.111.2.2.1.21 | Integer32 (0..255) | RW | ||||||||||
column · Integer32 (0..255) · read-write · current Specifies the Differentiated Services (DS) field in the IP packet. The DS field is defined as the Type Of Service (TOS) octet in IPv4 header or as the Traffic Class octet in IPv6 header. | |||||||||||||
| CnqaAdminParaDnsServerAddressType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.22 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Specifies the address type of DNS server. | |||||||||||||
| CnqaAdminParaDnsServerAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.23 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Specifies the address of DNS server. | |||||||||||||
| CnqaAdminParaOperation | 1.3.6.1.4.1.2011.5.25.111.2.2.1.24 | NqaOperation | RW | ||||||||||
column · NqaOperation · read-write · current Specifies the operation of FTP or HTTP type test instance. The operations of FTP-type test instance include get and put. The operations of HTTP-type test instance include get and post. | |||||||||||||
| CnqaAdminParaHttpVersion | 1.3.6.1.4.1.2011.5.25.111.2.2.1.25 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies the version of HTTP. | |||||||||||||
| CnqaAdminParaHttpOperationString | 1.3.6.1.4.1.2011.5.25.111.2.2.1.26 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current A string that specifies the HTTP operation which will be sent to the HTTP server. | |||||||||||||
| CnqaAdminParaTestFailurePercent | 1.3.6.1.4.1.2011.5.25.111.2.2.1.27 | Unsigned32 (0..100) | RW | ||||||||||
column · Unsigned32 (0..100) · read-write · current Specifies the scale over which the test will be regarded as failed. | |||||||||||||
| CnqaAdminParaFtpUserName | 1.3.6.1.4.1.2011.5.25.111.2.2.1.28 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies the user name of the FTP server. | |||||||||||||
| CnqaAdminParaFtpPassword | 1.3.6.1.4.1.2011.5.25.111.2.2.1.29 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies the password of the user of the FTP server. | |||||||||||||
| CnqaAdminParaFtpFilePath | 1.3.6.1.4.1.2011.5.25.111.2.2.1.30 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies the full name of the file which will be transmitted by the FTP-type test instance. | |||||||||||||
| CnqaAdminParaFtpFileSize | 1.3.6.1.4.1.2011.5.25.111.2.2.1.31 | Integer32 (0..10000) | RW | ||||||||||
column · Integer32 (0..10000) · read-write · current Specifies the size that the file will be transmitted by the FTP-type test instance. It may be part of the file. | |||||||||||||
| CnqaAdminParaInterval | 1.3.6.1.4.1.2011.5.25.111.2.2.1.32 | Integer32 (0..60000) | RW | ||||||||||
column · Integer32 (0..60000) · read-write · current Specifies the interval between two consecutive probe packets. If the test type is JITTER, ICMP JITTER or GENERALFLOW, the interval is restored to the default value when the value is set to 0.
| |||||||||||||
| CnqaAdminParaNumPackets | 1.3.6.1.4.1.2011.5.25.111.2.2.1.33 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the number of packet sent in each probe. This object is used together with nqaAdminParaProbeCount, and only applies to jitter-type test instance. | |||||||||||||
| CnqaAdminParaVrfName | 1.3.6.1.4.1.2011.5.25.111.2.2.1.34 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies the VRF name. | |||||||||||||
| CnqaAdminParaLspAddressType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.35 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the address type of LSP. The object applies to lspping, lsptrace and lspjitter type test instance.
| |||||||||||||
| CnqaAdminParaLspAddressMask | 1.3.6.1.4.1.2011.5.25.111.2.2.1.36 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the address mask of LSP. The object applies to lspping, lsptrace and lspjitter type test instance. | |||||||||||||
| CnqaAdminParaLspIpAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.37 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current IP Address filled in the ip header, must be a 127/8 address. | |||||||||||||
| CnqaAdminParaLspPWE3VcId | 1.3.6.1.4.1.2011.5.25.111.2.2.1.38 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The local Pseudo wire ID in PWE3 Ping test | |||||||||||||
| CnqaAdminParaLspPWE3Type | 1.3.6.1.4.1.2011.5.25.111.2.2.1.39 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The encapsulation type of Pseudo wire ID in the PWE3 Ping test
| |||||||||||||
| CnqaAdminParaLspPWE3Option | 1.3.6.1.4.1.2011.5.25.111.2.2.1.40 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The label type of PWE3 Ping and PWE3 Tracert test.
| |||||||||||||
| CnqaAdminParaLspPWE3RemoteVcId | 1.3.6.1.4.1.2011.5.25.111.2.2.1.41 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The remote Pseudo wire ID in PWE Ping test. | |||||||||||||
| CnqaAdminParaLspPWE3RemoteAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.42 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The remote IP address in PWE3 Ping test. | |||||||||||||
| CnqaAdminParaLspExp | 1.3.6.1.4.1.2011.5.25.111.2.2.1.43 | Unsigned32 (0..7) | RW | ||||||||||
column · Unsigned32 (0..7) · read-write · current The 3bit EXP field of the MPLS echo packet label. | |||||||||||||
| CnqaAdminParaLspReplyMode | 1.3.6.1.4.1.2011.5.25.111.2.2.1.44 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current ReplyMode
Value Meaning
***** *******
1 Do not reply
2 Reply via an IPv4/IPv6 UDP packet
3 Reply via an IPv4/IPv6 UDP packet with Router Alert
4 Reply via application level control channel
5 Reply via a VPLS IPv4 UDP packet
6 Reply via a SR-MPLS TE tunnel
| |||||||||||||
| CnqaAdminParaResultRowMax | 1.3.6.1.4.1.2011.5.25.111.2.2.1.45 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the maximum number of result records. | |||||||||||||
| CnqaAdminParaHistoryRowMax | 1.3.6.1.4.1.2011.5.25.111.2.2.1.46 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the maximum number of history records. | |||||||||||||
| CnqaAdminParaCreateHopsEntries | 1.3.6.1.4.1.2011.5.25.111.2.2.1.47 | EnableValue | RW | ||||||||||
column · EnableValue · read-write · current When set to enable (1), the result of each hop will be kept in nqaResultsTable. The object applies to trace, pwe3trace, lsptrace, vplstrace, vplspwtrace type test instance. | |||||||||||||
| CnqaAdminParaLspVCType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.48 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The type of protocol which establishes PW in the pwe3tracert test
| |||||||||||||
| CnqaAdminParaMTraceLastHopAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.49 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The last hop router's IP address in Mtrace test. | |||||||||||||
| CnqaAdminParaMTraceSourceAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.50 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The IP address of the multicast source for the path being traced in Mtrace test. | |||||||||||||
| CnqaAdminParaMTraceGroupAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.51 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The group address to be traced in Mtrace test, or zero if no group-specific information is desired. | |||||||||||||
| CnqaAdminParaMTraceMaxTtl | 1.3.6.1.4.1.2011.5.25.111.2.2.1.52 | Unsigned32 (1..255) | RW | ||||||||||
column · Unsigned32 (1..255) · read-write · current The maximum number of hops that the requester wants to trace in Mtrace test. | |||||||||||||
| CnqaAdminParaMTraceSendMode | 1.3.6.1.4.1.2011.5.25.111.2.2.1.53 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The sending mode of the Query pamessage in Mtrace test.
| |||||||||||||
| CnqaAdminParaMTraceResponseTtl | 1.3.6.1.4.1.2011.5.25.111.2.2.1.54 | Unsigned32 (1..255) | RW | ||||||||||
column · Unsigned32 (1..255) · read-write · current The TTL at which to multicast the response in Mtrace test, if the response address is a multicast address. | |||||||||||||
| CnqaAdminParaMTraceResponseAddressType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.55 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Mtrace response address type | |||||||||||||
| CnqaAdminParaMTraceResponseAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.56 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current This field specifies where the completed traceroute response packet gets sent in Mtrace test. It can be a unicast address or a multicast address | |||||||||||||
| CnqaAdminParaDistanceNodeType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.57 | NqaDistanceNodeType | RW | ||||||||||
column · NqaDistanceNodeType · read-write · current The destination of MAC ping(mac address or rmepid). | |||||||||||||
| CnqaAdminParaMacAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.58 | MacAddress | RW | ||||||||||
column · MacAddress · read-write · current Mac address of the destination of MAC PING. | |||||||||||||
| CnqaAdminParaRMepID | 1.3.6.1.4.1.2011.5.25.111.2.2.1.59 | Dot1agCfmMepIdOrZero | RW | ||||||||||
column · Dot1agCfmMepIdOrZero · read-write · current Rmepid of the destination of MAC PING. | |||||||||||||
| CnqaAdminParaMDName | 1.3.6.1.4.1.2011.5.25.111.2.2.1.60 | OCTET STRING (SIZE (0..43)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..43)) · read-write · current Indicate the MD name in which the MAC Ping operated. | |||||||||||||
| CnqaAdminParaMAName | 1.3.6.1.4.1.2011.5.25.111.2.2.1.61 | OCTET STRING (SIZE (0..45)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..45)) · read-write · current Indicate the MA name in which the MAC Ping operated. | |||||||||||||
| CnqaAdminParaMacTunnelName | 1.3.6.1.4.1.2011.5.25.111.2.2.1.62 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Indicate the MAC Tunnel name in which the MAC Ping operated. | |||||||||||||
| CnqaAdminParaPathMtuStep | 1.3.6.1.4.1.2011.5.25.111.2.2.1.63 | Integer32 (1..512) | RW | ||||||||||
column · Integer32 (1..512) · read-write · current Specify the step of the path MTU test. If the last response was received successful,the next packet's length will add the step. | |||||||||||||
| CnqaAdminParaPathMtuDiscoveryPathMtuMax | 1.3.6.1.4.1.2011.5.25.111.2.2.1.64 | Integer32 (48..9198) | RW | ||||||||||
column · Integer32 (48..9198) · read-write · current Specify the max value of the discovery field in the path MTU test. | |||||||||||||
| CnqaAdminParaIcmpJitterMode | 1.3.6.1.4.1.2011.5.25.111.2.2.1.65 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Select the type of ICMP packets to be sent in ICMP jitter and path jitter test. The value can be icmpTimestamp(1) or icmpEcho(2).
| |||||||||||||
| CnqaAdminParaCodecType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.66 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
| |||||||||||||
| CnqaAdminParaIcpifAdvFactor | 1.3.6.1.4.1.2011.5.25.111.2.2.1.67 | Integer32 (0..20) | RW | ||||||||||
column · Integer32 (0..20) · read-write · current The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |***************************************************|*******| | Service |factor | |***************************************************|*******| | conventional wire-line | 0 | |***************************************************|*******| | mobility within Building | 5 | |***************************************************|*******| | mobility within geographical area | 10 | |***************************************************|*******| | access to hard-to-reach location | 20 | |***************************************************|*******| | |||||||||||||
| CnqaAdminParaFtpMode | 1.3.6.1.4.1.2011.5.25.111.2.2.1.68 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To indicate the mode to be used with ftp probe. This is applicable only for the ftp probe.
| |||||||||||||
| CnqaAdminParaHardwareBased | 1.3.6.1.4.1.2011.5.25.111.2.2.1.69 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Indicates that the hardware is enabled to send packets. (The value range: enable:1;disable:2.The default value is disable(2)) | |||||||||||||
| CnqaAdminParaPppoeUserName | 1.3.6.1.4.1.2011.5.25.111.2.2.1.70 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute, tcp,udp,ftp,dns,http probes, this parameter indicates that the probe uses PPPoE encapsulation. This parameter accepts the characters in sight only. | |||||||||||||
| CnqaAdminParaPppoePassword | 1.3.6.1.4.1.2011.5.25.111.2.2.1.71 | OCTET STRING (SIZE (0..16)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · current Specifies the password of PPPoE dial-up. This is applicable only for the PPPoE probe. This parameter accepts the characters in sight only. | |||||||||||||
| CnqaAdminParaPppoeVlanIf | 1.3.6.1.4.1.2011.5.25.111.2.2.1.72 | Integer32 (0..4093) | RW | ||||||||||
column · Integer32 (0..4093) · read-write · current Specifies the vlanif of PPPoE dial-up. For jitter, icmp, traceroute, tcp, udp, ftp, dns, http probes, this parameter indicates that the probe uses PPPoE encapsulation. | |||||||||||||
| CnqaAdminParaPppoeAuthenticationMode | 1.3.6.1.4.1.2011.5.25.111.2.2.1.73 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the authentication mode of PPPoE dial-up. This is applicable only for the PPPoE probe.
| |||||||||||||
| CnqaAdminParaPppoeRedialUpTimes | 1.3.6.1.4.1.2011.5.25.111.2.2.1.74 | Integer32 (0..10) | RW | ||||||||||
column · Integer32 (0..10) · read-write · current Specifies the redialup times of PPPoE dial-up. This is applicable only for the PPPoE probe. | |||||||||||||
| CnqaAdminParaPppoeInterval | 1.3.6.1.4.1.2011.5.25.111.2.2.1.75 | Integer32 (1..600) | RW | ||||||||||
column · Integer32 (1..600) · read-write · current Specifies the redialup interval of PPPoE dial-up. This is applicable only for the PPPoE probe. | |||||||||||||
| CnqaAdminParaVsiName | 1.3.6.1.4.1.2011.5.25.111.2.2.1.76 | OCTET STRING (SIZE (0..31)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..31)) · read-write · current Specify the name of the VSI(Virtual Switch Instance) | |||||||||||||
| CnqaAdminParaVlanId | 1.3.6.1.4.1.2011.5.25.111.2.2.1.77 | VlanIdOrNone | RW | ||||||||||
column · VlanIdOrNone · read-write · current Specify the Vlan ID | |||||||||||||
| CnqaAdminParaLspTunnelType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.78 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To indicate ping/trace which lsp tunnel.
| |||||||||||||
| CnqaAdminParaLspNextHopAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.79 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Represents the address of nexthop. | |||||||||||||
| CnqaAdminParaLspVersion | 1.3.6.1.4.1.2011.5.25.111.2.2.1.80 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol , ptn mode or compatible mode.
| |||||||||||||
| CnqaAdminParaRemoteAddressType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.81 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Represents the address type of remote. | |||||||||||||
| CnqaAdminParaRemoteAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.82 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Represents the address of remote. | |||||||||||||
| CnqaAdminParaTimeUnit | 1.3.6.1.4.1.2011.5.25.111.2.2.1.83 | INTEGER | RW | ms(2) | |||||||||
column · INTEGER · read-write · current The unit of the timestamp, ms or us.
Example values from LibreNMS test devices
| |||||||||||||
| CnqaAdminParaProbeRate | 1.3.6.1.4.1.2011.5.25.111.2.2.1.84 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The rate of sending message, bps. | |||||||||||||
| CnqaAdminParaLifeTime | 1.3.6.1.4.1.2011.5.25.111.2.2.1.85 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The life time of test-case, s. | |||||||||||||
| CnqaAdminParaProtocolType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.86 | ProtocolType | RW | ||||||||||
column · ProtocolType · read-write · current The protocol type of test-case. When the test type is rtptest or rtpsnoop, the default value is udp(1), when the test type is not rtptest or rtpsnoop, the default value is unknown(0), which means unspecified or unused. | |||||||||||||
| CnqaAdminParaSampleFrequency | 1.3.6.1.4.1.2011.5.25.111.2.2.1.87 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The frequency of rtpsnoop test, khz. | |||||||||||||
| CnqaAdminParaPacketSize | 1.3.6.1.4.1.2011.5.25.111.2.2.1.88 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The packet size of message, byte. | |||||||||||||
| CnqaAdminParaPacketInterval | 1.3.6.1.4.1.2011.5.25.111.2.2.1.89 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The interval of sending message, ms. | |||||||||||||
| CnqaAdminParaNextHopAddressType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.90 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Specifies the address type of nexthop. | |||||||||||||
| CnqaAdminParaNextHopAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.91 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Specifies the address of nexthop. | |||||||||||||
| CnqaAdminParaForwardingSimulationInboundIfIndex | 1.3.6.1.4.1.2011.5.25.111.2.2.1.92 | InterfaceIndexOrZero | RW | ||||||||||
column · InterfaceIndexOrZero · read-write · current Specifies the inbound interface to simulate product forwarding. | |||||||||||||
| CnqaAdminParaMeasure | 1.3.6.1.4.1.2011.5.25.111.2.2.1.93 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to configure the test mode for generalflow test.
| |||||||||||||
| CnqaAdminParaEthPriority | 1.3.6.1.4.1.2011.5.25.111.2.2.1.94 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object is used to configure the priority of Ethernet packets for generalflow test in the Ethernet service scenario. | |||||||||||||
| CnqaAdminParaMinRate | 1.3.6.1.4.1.2011.5.25.111.2.2.1.95 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object is used to configure the minimum transmitting rate, in Kbps. | |||||||||||||
| CnqaAdminParaMaxRate | 1.3.6.1.4.1.2011.5.25.111.2.2.1.96 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object is used to configure the maximum transmitting rate, in Kbps. | |||||||||||||
| CnqaAdminParaCevid | 1.3.6.1.4.1.2011.5.25.111.2.2.1.97 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object is used to configure the CE VLAN ID for generalflow test in the Ethernet service scenario. | |||||||||||||
| CnqaAdminParaPevid | 1.3.6.1.4.1.2011.5.25.111.2.2.1.98 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object is used to configure the PE VLAN ID for generalflow test in the Ethernet service scenario. | |||||||||||||
| CnqaAdminParaPrecision | 1.3.6.1.4.1.2011.5.25.111.2.2.1.99 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object is used to configure the throughput precision. | |||||||||||||
| CnqaAdminParaSnmpCommunityRead | 1.3.6.1.4.1.2011.5.25.111.2.2.1.100 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current Set the community name to that with a read-only permission configured on the SNMP agent. When read, it always returns length 0. | |||||||||||||
| CnqaAdminParaDatasizeList | 1.3.6.1.4.1.2011.5.25.111.2.2.1.101 | OCTET STRING (SIZE (0..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-write · current The size of data field in packet for generalflow test, default '64 128 256 512 1024 1280 1518'. | |||||||||||||
| CnqaAdminParaFailRatioPrecision | 1.3.6.1.4.1.2011.5.25.111.2.2.1.102 | Unsigned32 (0..1) | RW | ||||||||||
column · Unsigned32 (0..1) · read-write · current Indicates the precision of the threshold for the packet loss ratio. 0 indicates in 10e-4. 1 indicates in 10e-9. | |||||||||||||
| CnqaAdminParaFailRatioValue | 1.3.6.1.4.1.2011.5.25.111.2.2.1.103 | Unsigned32 (0..10000000) | RW | ||||||||||
column · Unsigned32 (0..10000000) · read-write · current Indicates the threshold for the packet loss ratio.The default value is 0. | |||||||||||||
| CnqaAdminGeneralflowTestBehavior | 1.3.6.1.4.1.2011.5.25.111.2.2.1.104 | Unsigned32 (0..1) | RW | ||||||||||
column · Unsigned32 (0..1) · read-write · current This object indicates the action performed on the non-test frames by the initiator. 0: Non-test frames will be discarded, and test frames will be forwarded. 1: Both non-test frames and test frames will be forwarded. | |||||||||||||
| CnqaAdminParaFrameRate | 1.3.6.1.4.1.2011.5.25.111.2.2.1.105 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates an Ethernet frame rate. 1: utilized line rate (L1 rate). 2: information rate (L2 rate).
| |||||||||||||
| CnqaAdminGeneralflowDiscardNonTestPriority | 1.3.6.1.4.1.2011.5.25.111.2.2.1.106 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object is used to configure the discarding priority of Ethernet packets for generalflow test in the Ethernet service scenario. The value can range from 0 to 7 if this node was configured, the value will be 0xffffffff if this node was not configured. | |||||||||||||
| CnqaAdminParaSourceMacAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.107 | MacAddress | RW | ||||||||||
column · MacAddress · read-write · current Mac address of the source point. | |||||||||||||
| CnqaAdminParaCeEthType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.108 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current Specifies the type of Ethernet encapsulation.Default is 0x8100. | |||||||||||||
| CnqaAdminParaPeEthType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.109 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current Specifies the type of Ethernet encapsulation for QinQ outer vlan. Default is 0x8100. | |||||||||||||
| CnqaAdminParaDirection | 1.3.6.1.4.1.2011.5.25.111.2.2.1.110 | Unsigned32 (1..2) | RW | ||||||||||
column · Unsigned32 (1..2) · read-write · current Specifies the test direction. 1 indicates inbound. Send packets in manner of simulate product forwarding. 2 indicates outbound. Send packets in manner of output. | |||||||||||||
| CnqaAdminParaLspVpnFrrPathType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.111 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To indicate ping which ipv4-vpn lsp.
| |||||||||||||
| CnqaAdminParaSoftwareBased | 1.3.6.1.4.1.2011.5.25.111.2.2.1.112 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Indicates that the software-based test is enabled only when the test case type is rtptest. (The value range: enable:1;disable:2.The default value is disable(2)) | |||||||||||||
| CnqaAdminParaLspPathType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.113 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To indicate ping vpls pw via which lsp.
| |||||||||||||
| CnqaAdminParaPathType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.114 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To indicate ping request packet via which path.
| |||||||||||||
| CnqaAdminParaFragment | 1.3.6.1.4.1.2011.5.25.111.2.2.1.115 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current This object enables setting of Fragment (F) flag in the IP header for a probe. | |||||||||||||
| CnqaAdminParaEthPriorityStatus | 1.3.6.1.4.1.2011.5.25.111.2.2.1.116 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Used for enabling or disabling the priority of Ethernet functionality when the test case type is Generalflow.
Options:
1. enabled(1) -indicates the priority of Ethernet functionality is enabled.
2. disabled(2) -indicates the priority of Ethernet functionality is disabled.
Default: disabled(2). | |||||||||||||
| CnqaAdminParaRmoteFecType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.117 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the remote FEC type. The object applies to lspping and lsptrace type test instance.
| |||||||||||||
| CnqaAdminParaRmoteFecMask | 1.3.6.1.4.1.2011.5.25.111.2.2.1.118 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the address mask of remote FEC. The object applies to lspping and lsptrace type test instance. | |||||||||||||
| CnqaAdminParaRmoteFecIpAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.119 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The IPV4 address of remote FEC. The object applies to lspping and lsptrace type test instance. | |||||||||||||
| CnqaAdminParaSrPolicyName | 1.3.6.1.4.1.2011.5.25.111.2.2.1.120 | OCTET STRING (SIZE (0..255)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-write · current The Policy name of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance. | |||||||||||||
| CnqaAdminParaSrPolicyEndPointAddrType | 1.3.6.1.4.1.2011.5.25.111.2.2.1.121 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Represents the address type of destination. | |||||||||||||
| CnqaAdminParaSrPolicyEndPointIpAddress | 1.3.6.1.4.1.2011.5.25.111.2.2.1.122 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The destination of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance. | |||||||||||||
| CnqaAdminParaSrPolicyEndPointColor | 1.3.6.1.4.1.2011.5.25.111.2.2.1.123 | Unsigned32 (0..4294967295) | RW | ||||||||||
column · Unsigned32 (0..4294967295) · read-write · current The color of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance. | |||||||||||||
| CnqaAdminParaSrPolicyBindingSid | 1.3.6.1.4.1.2011.5.25.111.2.2.1.124 | Unsigned32 (0 | 16..1048575) | RW | ||||||||||
column · Unsigned32 (0 | 16..1048575) · read-write · current The binding sid of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance. | |||||||||||||
| CnqaAdminParaDscp | 1.3.6.1.4.1.2011.5.25.111.2.2.1.125 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Indicates that the DS field is defined as the DSCP in the IP packet. | |||||||||||||
| CnqaAdminParaFlexAlgoId | 1.3.6.1.4.1.2011.5.25.111.2.2.1.126 | Unsigned32 (0 | 128..255) | RW | ||||||||||
column · Unsigned32 (0 | 128..255) · read-write · current The flexible algorithm ID. The object applies to lspping and lsptrace type test instance. | |||||||||||||
| TnqaScheduleTable | 1.3.6.1.4.1.2011.5.25.111.2.3 | NA | |||||||||||
table · not-accessible · current Description: nqaScheduleTable describes test instance task scheduling. It implements scheduling of test instances to reduce device burden caused by concurrent tasks. The scheduling content includes the setting of the start time and end time of a single test instance. When several tasks are performed at the same time, the device properly arranges start time and test intervals. Creation restrictions: None Modification restrictions: The Read-create node can be modified when a test instance is in inactive state. Deletion restrictions: None Access restrictions: None | |||||||||||||
| RnqaScheduleEntry | 1.3.6.1.4.1.2011.5.25.111.2.3.1 | NA | |||||||||||
row · not-accessible · current Set start-up in the nqaAdminParaTable. | |||||||||||||
| CnqaScheduleStartType | 1.3.6.1.4.1.2011.5.25.111.2.3.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the start type of the test instance. The object is used together with nqaScheduleStartTime.
| |||||||||||||
| CnqaScheduleStartTime | 1.3.6.1.4.1.2011.5.25.111.2.3.1.2 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current Specifies the start time of the test instance. Setting the value to 0 indicates to start the test instance immediately. After configuring this object, the status of the test instance is active, and the parameters of the test instance cannot be changed. | |||||||||||||
| CnqaScheduleEndType | 1.3.6.1.4.1.2011.5.25.111.2.3.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the end type of the test instance. The object is used together with nqaScheduleEndTime.
| |||||||||||||
| CnqaScheduleEndTime | 1.3.6.1.4.1.2011.5.25.111.2.3.1.4 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current Specifies the end time of the test instance. | |||||||||||||
| CnqaScheduleAgeTime | 1.3.6.1.4.1.2011.5.25.111.2.3.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the aging time of the test instance, the time how long the test instance will be reserved in NQA, after the test instance is inactive. Setting the value to 0 indicates reserving the test instance eternally. | |||||||||||||
| CnqaScheduleElapsedTime | 1.3.6.1.4.1.2011.5.25.111.2.3.1.6 | TimeInterval | RO | ||||||||||
column · TimeInterval · read-only · current The elapsed time (the period of time after task dispatch). | |||||||||||||
| CnqaScheduleNumOfInitiations | 1.3.6.1.4.1.2011.5.25.111.2.3.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Specifies the times that the test instance has been initialed. This object is used as the index of the result table, HTTP statistics table, jitter statistics table, FTP statistics table and history table. | |||||||||||||
| CnqaScheduleLastFinishIndex | 1.3.6.1.4.1.2011.5.25.111.2.3.1.8 | Integer32 | RO | 27 | |||||||||
column · Integer32 · read-only · current Specifies the latest finished test of the test instance, which is used as the index of the result table. | |||||||||||||
| CnqaScheduleOperStatus | 1.3.6.1.4.1.2011.5.25.111.2.3.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the status of dispatching operation: - reset: Clear all the records of the test instance. - stop: Stop the test instance, if it's running. - restart: Stop the test instance, if it's running, and restart the test instance immediately. - active: The test instance is running; the parameters of the test instances cannot be changed. - inactive: The test instance doesn't be scheduled; the parameters of the test instances can be changed.
| |||||||||||||
| CnqaScheduleLastCollectIndex | 1.3.6.1.4.1.2011.5.25.111.2.3.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Specifies the index of the latest collection statistics result record in the collection result table. | |||||||||||||
| TnqaGroupTable | 1.3.6.1.4.1.2011.5.25.111.2.4 | NA | |||||||||||
table · not-accessible · current Set group for a test. | |||||||||||||
| RnqaGroupEntry | 1.3.6.1.4.1.2011.5.25.111.2.4.1 | NA | |||||||||||
row · not-accessible · current Set parameters in the nqaGroupTable. | |||||||||||||
| CnqaGroupStatusType | 1.3.6.1.4.1.2011.5.25.111.2.4.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the group status of the test instance. The value can be normal (1), leader (2) or member (3).
| |||||||||||||
| CnqaGroupPeriod | 1.3.6.1.4.1.2011.5.25.111.2.4.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the interval during which all members in the specified group will be executed.
| |||||||||||||
| CnqaGroupLeaderOwnerIndex | 1.3.6.1.4.1.2011.5.25.111.2.4.1.3 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current Specifies the owner index of the group leader, if the test instance is a member of the group. | |||||||||||||
| CnqaGroupLeaderTestName | 1.3.6.1.4.1.2011.5.25.111.2.4.1.4 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current Specifies the test name of the group leader, if the test instance is a member of the group. | |||||||||||||
| CnqaGroupMemberNum | 1.3.6.1.4.1.2011.5.25.111.2.4.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Specifies the number of member in the group. | |||||||||||||
| CnqaGroupMemberFree | 1.3.6.1.4.1.2011.5.25.111.2.4.1.6 | EnableValue | RW | ||||||||||
column · EnableValue · read-write · current Free all members in the group. | |||||||||||||
| TnqaAdminParaExtTable | 1.3.6.1.4.1.2011.5.25.111.2.5 | NA | |||||||||||
table · not-accessible · current Description: Objects in this table are used in pairs. In each pair, the first object is read-only. After the test instance type is specified, the system automatically fills the character string. Its content is the description of the second object, so that the user can learn the description and value range of the second object. The second object is a configurable NQA parameter. Test instances have different descriptions and values. After the test instance type is specified, the user can obtain the information from the first object. The values of the first 15 pairs of objects in this table are numbers, and those of the last 10 pairs of objects are character strings. Creation restrictions: None Modification restrictions: None Deletion restrictions: None Access restrictions: None | |||||||||||||
| RnqaAdminParaExtEntry | 1.3.6.1.4.1.2011.5.25.111.2.5.1 | NA | |||||||||||
row · not-accessible · current Set parameter in the nqaAdminParaExtTable. | |||||||||||||
| CnqaAdminExtPara1 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.1 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara2 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara2 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara1 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara3 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara4 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara4 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara3 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara5 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.5 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara6 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara6 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara5 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara7 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.7 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara8 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara8 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara7 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara9 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.9 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara10 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara10 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara9 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara11 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.11 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara12 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara12 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara11 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara13 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.13 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara14 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara14 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.14 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara13 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara15 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.15 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara16 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara16 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.16 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara15 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara17 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.17 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara18 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara18 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.18 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara17 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara19 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.19 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara20 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara20 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.20 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara19 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara21 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.21 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara22 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara22 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.22 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara21 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara23 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.23 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara24 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara24 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.24 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara23 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara25 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.25 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara26 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara26 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.26 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara25 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara27 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.27 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara28 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara28 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.28 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara27 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara29 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.29 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara30 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara30 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.30 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara29 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara31 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.31 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara32 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara32 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.32 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara31 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara33 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.33 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara34 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara34 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.34 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara33 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara35 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.35 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara36 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara36 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.36 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara35 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara37 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.37 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara38 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara38 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.38 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara37 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara39 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.39 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara40 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara40 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.40 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara39 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara41 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.41 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara42 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara42 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.42 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara41 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara43 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.43 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara44 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara44 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.44 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara43 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara45 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.45 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara46 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara46 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.46 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara45 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara47 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.47 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara48 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara48 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.48 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara47 object after the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara49 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.49 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the description of the nqaAdminExtPara50 object. The value is automatically assigned by the system after the type of the test case is ascertained. | |||||||||||||
| CnqaAdminExtPara50 | 1.3.6.1.4.1.2011.5.25.111.2.5.1.50 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara49 object after the test case is ascertained. | |||||||||||||
| TnqaEthernetServiceParaTable | 1.3.6.1.4.1.2011.5.25.111.2.6 | NA | |||||||||||
table · not-accessible · current Parameters about Y.1564 test parameters table. | |||||||||||||
| RnqaEthernetServiceParaEntry | 1.3.6.1.4.1.2011.5.25.111.2.6.1 | NA | |||||||||||
row · not-accessible · current Parameters about Y.1564 test parameters entry. | |||||||||||||
| CnqaEthernetServiceParaFwdSimulationInboundIfIndex | 1.3.6.1.4.1.2011.5.25.111.2.6.1.1 | InterfaceIndexOrZero | RW | ||||||||||
column · InterfaceIndexOrZero · read-write · current This object indicates the forwarding-simulation inbound interface. | |||||||||||||
| CnqaEthernetServiceParaOutboundIfIndex | 1.3.6.1.4.1.2011.5.25.111.2.6.1.2 | InterfaceIndexOrZero | RW | ||||||||||
column · InterfaceIndexOrZero · read-write · current This object indicates the outbound interface. | |||||||||||||
| CnqaEthernetServiceParaConfigrationDuration | 1.3.6.1.4.1.2011.5.25.111.2.6.1.3 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object indicates the duration of configration test. | |||||||||||||
| CnqaEthernetServiceParaPerformanceDuration | 1.3.6.1.4.1.2011.5.25.111.2.6.1.4 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object indicates the duration of performance test. | |||||||||||||
| CnqaEthernetServiceParaPacketSizeValue | 1.3.6.1.4.1.2011.5.25.111.2.6.1.5 | OCTET STRING (SIZE (0..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-write · current This object indicates the packet size. The default value is 512. | |||||||||||||
| CnqaEthernetServiceParaTestFlowId | 1.3.6.1.4.1.2011.5.25.111.2.6.1.6 | OCTET STRING (SIZE (0..127)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..127)) · read-write · current This object indicates the testflow id. | |||||||||||||
| CnqaEthernetServiceParaPacketSizeProfile | 1.3.6.1.4.1.2011.5.25.111.2.6.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the packet size mode, the default is 0.
| |||||||||||||
| CnqaEthernetServiceParaDisorderStatistics | 1.3.6.1.4.1.2011.5.25.111.2.6.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether enable packet disorder statistic,the default is disable(1).
| |||||||||||||
| NnqaServer | 1.3.6.1.4.1.2011.5.25.111.3 | ||||||||||||
| SnqaServerEnable | 1.3.6.1.4.1.2011.5.25.111.3.1 | EnableValue | RW | ||||||||||
scalar · EnableValue · read-write · current Enables NQA server, which can be the echo server of TCP, UDP and jitter type test instance. | |||||||||||||
| TnqaTcpServerTable | 1.3.6.1.4.1.2011.5.25.111.3.2 | NA | |||||||||||
table · not-accessible · current A table which contains the status of nqa tcp server configuration information. | |||||||||||||
| RnqaTcpServerEntry | 1.3.6.1.4.1.2011.5.25.111.3.2.1 | NA | |||||||||||
row · not-accessible · current A table which contains the status of nqa tcp server configuration information. This entry is included not only the tcp server ip address but also the tcp server tcp port. If used for VPN it is also included the VPN name. | |||||||||||||
| CnqaTcpServerAddressType | 1.3.6.1.4.1.2011.5.25.111.3.2.1.1 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current Specifies the address type of TCP server. | |||||||||||||
| CnqaTcpServerAddress | 1.3.6.1.4.1.2011.5.25.111.3.2.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current Specifies the address of TCP server. | |||||||||||||
| CnqaTcpServerPort | 1.3.6.1.4.1.2011.5.25.111.3.2.1.3 | InetPortNumber | NA | ||||||||||
column · InetPortNumber · not-accessible · current Specifies the port number on which TCP server is listening. | |||||||||||||
| CnqaTcpServerVrfName | 1.3.6.1.4.1.2011.5.25.111.3.2.1.4 | DisplayString (SIZE (1..31)) | NA | ||||||||||
column · DisplayString (SIZE (1..31)) · not-accessible · current Specifies the VRF (VPN Routing & Forwarding) instances name of the TCP server. | |||||||||||||
| CnqaTcpServerStatus | 1.3.6.1.4.1.2011.5.25.111.3.2.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Specifies the operation of the TCP server, creating or deleting. | |||||||||||||
| TnqaUdpServerTable | 1.3.6.1.4.1.2011.5.25.111.3.3 | NA | |||||||||||
table · not-accessible · current Description: This table describes how to configure the NQA UDP service of the server, such as configuring a protocol, IP address, port number, and VRF. Creation restrictions The entries in this table can be created only when the indexes nqaUdpServerAddress, nqaUdpServerPort, and nqaUdpServerVrfName are specified. The nqaUdpServerAddressType index value must be ipv4(1). The nqaUdpServerStatus index value must be CreateAndGo (4). Modification restrictions: The entries in this table cannot be modified. Deletion restrictions The entries in this table can be deleted. Indexes must be specified. The nqaUdpServerStatus index value must be Destroy (6). Access restrictions The entries in this table can be accessed only when the nqaUdpServerStatus index value is active(1) or notInService(2). | |||||||||||||
| RnqaUdpServerEntry | 1.3.6.1.4.1.2011.5.25.111.3.3.1 | NA | |||||||||||
row · not-accessible · current A table which contains the status of nqa udp server configuration information. This entry is includeed not only the udp server ip address but also the udp server udp port.If used for VPN it is also included the VPN name. | |||||||||||||
| CnqaUdpServerAddressType | 1.3.6.1.4.1.2011.5.25.111.3.3.1.1 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current Specifies the address type of UDP server. | |||||||||||||
| CnqaUdpServerAddress | 1.3.6.1.4.1.2011.5.25.111.3.3.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current Specifies the address of UDP server. | |||||||||||||
| CnqaUdpServerPort | 1.3.6.1.4.1.2011.5.25.111.3.3.1.3 | InetPortNumber | NA | ||||||||||
column · InetPortNumber · not-accessible · current Specifies the port number on which UDP server is listening. | |||||||||||||
| CnqaUdpServerVrfName | 1.3.6.1.4.1.2011.5.25.111.3.3.1.4 | DisplayString (SIZE (1..31)) | NA | ||||||||||
column · DisplayString (SIZE (1..31)) · not-accessible · current Specifies the VRF (VPN Routing & Forwarding) instances name of the UDP server. | |||||||||||||
| CnqaUdpServerStatus | 1.3.6.1.4.1.2011.5.25.111.3.3.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Specifies the operation of the UDP server, creating or deleting. | |||||||||||||
| TnqaIcmpServerTable | 1.3.6.1.4.1.2011.5.25.111.3.4 | NA | |||||||||||
table · not-accessible · current Description: This table describes how to configure the NQA ICMP service of the server, such as configuring a server, IP address, and VRF. Creation restrictions The entries in this table can be created only when the indexes nqaIcmpServerAddress and nqaUdpServerVrfName are specified. The nqaIcmpServerAddressType index value must be ipv4(1). The nqaIcmpServerStatus index value must be CreateAndGo (4). Modification restrictions: The entries in this table cannot be modified. Deletion restrictions The entries in this table can be deleted. Indexes must be specified. The nqaIcmpServerStatus index value must be 6(Destroy). Access restrictions If the nqaIcmpServerStatus value returned is active(1), the ICMP server is running. If the nqaIcmpServerStatus value returned is notInService(2), the ICMP server has stopped running. | |||||||||||||
| RnqaIcmpServerEntry | 1.3.6.1.4.1.2011.5.25.111.3.4.1 | NA | |||||||||||
row · not-accessible · current A table which contains the status of nqa ICMP server configuration information. This entry is included the ICMP server IP address. If used for VPN it is also included the VPN name. | |||||||||||||
| CnqaIcmpServerAddress | 1.3.6.1.4.1.2011.5.25.111.3.4.1.1 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current Specifies the address of ICMP server. | |||||||||||||
| CnqaIcmpServerVrfName | 1.3.6.1.4.1.2011.5.25.111.3.4.1.2 | DisplayString (SIZE (1..31)) | NA | ||||||||||
column · DisplayString (SIZE (1..31)) · not-accessible · current Specifies the VRF (VPN Routing & Forwarding) instances name of the ICMP server. | |||||||||||||
| CnqaIcmpServerAddressType | 1.3.6.1.4.1.2011.5.25.111.3.4.1.3 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current Specifies the address type of ICMP server. | |||||||||||||
| CnqaIcmpServerStatus | 1.3.6.1.4.1.2011.5.25.111.3.4.1.51 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Specifies the operation of the ICMP server, creating or deleting. | |||||||||||||
| TnqaRtpUdpServerTable | 1.3.6.1.4.1.2011.5.25.111.3.5 | NA | |||||||||||
table · not-accessible · current A table which contains the status of nqa rtp-udp server configuration information. | |||||||||||||
| RnqaRtpUdpServerEntry | 1.3.6.1.4.1.2011.5.25.111.3.5.1 | NA | |||||||||||
row · not-accessible · current A table which contains the status of nqa rtp-udp server configuration information. This entry is includeed not only the rtp-udp server ip address but also the rtp-udp server udp port.If used for VPN it is also included the VPN name. | |||||||||||||
| CnqaRtpUdpServerAddressType | 1.3.6.1.4.1.2011.5.25.111.3.5.1.1 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current Specifies the address type of rtp-udp server. | |||||||||||||
| CnqaRtpUdpServerAddress | 1.3.6.1.4.1.2011.5.25.111.3.5.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current Specifies the address of rtp-udp server. | |||||||||||||
| CnqaRtpUdpServerPort | 1.3.6.1.4.1.2011.5.25.111.3.5.1.3 | InetPortNumber | NA | ||||||||||
column · InetPortNumber · not-accessible · current Specifies the port number on which rtp-udp server is listening. | |||||||||||||
| CnqaRtpUdpServerVrfName | 1.3.6.1.4.1.2011.5.25.111.3.5.1.4 | DisplayString (SIZE (1..31)) | NA | ||||||||||
column · DisplayString (SIZE (1..31)) · not-accessible · current Specifies the VRF (VPN Routing & Forwarding) instances name of the rtp-udp server. | |||||||||||||
| CnqaRtpUdpServerStatus | 1.3.6.1.4.1.2011.5.25.111.3.5.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Specifies the operation of the rtp-udp server, creating or deleting. | |||||||||||||
| CnqaRtpUdpServerSoftwareBased | 1.3.6.1.4.1.2011.5.25.111.3.5.1.6 | EnabledStatus | RC | ||||||||||
column · EnabledStatus · read-create · current Indicates that the software-based test is enabled only when the test case type is rtptest. (The value range: enable:1;disable:2.The default value is disable(2)) | |||||||||||||
| TnqaRtpTcpServerTable | 1.3.6.1.4.1.2011.5.25.111.3.6 | NA | |||||||||||
table · not-accessible · current This table contains the status of nqa rtp-tcp server configurations. | |||||||||||||
| RnqaRtpTcpServerEntry | 1.3.6.1.4.1.2011.5.25.111.3.6.1 | NA | |||||||||||
row · not-accessible · current This table contains the status of nqa rtp-tcp server configurations. This entry includes not only the rtp-tcp server ip address but also the rtp-tcp server udp port. If it is used for VPN, the VPN name is also included. | |||||||||||||
| CnqaRtpTcpServerAddressType | 1.3.6.1.4.1.2011.5.25.111.3.6.1.1 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current Specifies the address type of the rtp-tcp server. | |||||||||||||
| CnqaRtpTcpServerAddress | 1.3.6.1.4.1.2011.5.25.111.3.6.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current Specifies the address of the rtp-tcp server. | |||||||||||||
| CnqaRtpTcpServerPort | 1.3.6.1.4.1.2011.5.25.111.3.6.1.3 | InetPortNumber | NA | ||||||||||
column · InetPortNumber · not-accessible · current Specifies the number of the port on which the rtp-tcp server is listening. | |||||||||||||
| CnqaRtpTcpServerVrfName | 1.3.6.1.4.1.2011.5.25.111.3.6.1.4 | DisplayString (SIZE (1..31)) | NA | ||||||||||
column · DisplayString (SIZE (1..31)) · not-accessible · current Specifies the VRF (VPN Routing & Forwarding) names of the rtp-tcp server. | |||||||||||||
| CnqaRtpTcpServerStatus | 1.3.6.1.4.1.2011.5.25.111.3.6.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Specifies whether an rtp-tcp server is created or deleted. | |||||||||||||
| NnqaStats | 1.3.6.1.4.1.2011.5.25.111.4 | ||||||||||||
| TnqaResultsTable | 1.3.6.1.4.1.2011.5.25.111.4.1 | NA | |||||||||||
table · not-accessible · current Description: This table describes result information of a test instance. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the following conditions are met. A GET operation is performed. The test instance type must be ICMP, UDP, or TCP. The nqaResultsIndex and nqaResultsHopIndex values must be 0. | |||||||||||||
| RnqaResultsEntry | 1.3.6.1.4.1.2011.5.25.111.4.1.1 | NA | |||||||||||
row · not-accessible · current The operation of this table is same as that of nqaResultsTable. | |||||||||||||
| CnqaResultsIndex | 1.3.6.1.4.1.2011.5.25.111.4.1.1.1 | Integer32 (0..2147483647) | NA | ||||||||||
column · Integer32 (0..2147483647) · not-accessible · current The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. | |||||||||||||
| CnqaResultsHopIndex | 1.3.6.1.4.1.2011.5.25.111.4.1.1.2 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1. | |||||||||||||
| CnqaResultsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test.
| |||||||||||||
| CnqaResultsTestAttempts | 1.3.6.1.4.1.2011.5.25.111.4.1.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test attempts. The value of this object MUST be started at 0.
| |||||||||||||
| CnqaResultsCurHopCount | 1.3.6.1.4.1.2011.5.25.111.4.1.1.5 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0.
| |||||||||||||
| CnqaResultsCurProbeCount | 1.3.6.1.4.1.2011.5.25.111.4.1.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index.
| |||||||||||||
| CnqaResultsRTDOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.1.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of successful statistics test RTD (Round Trip Delay) over the threshold. | |||||||||||||
| CnqaResultsSumCompletionTime | 1.3.6.1.4.1.2011.5.25.111.4.1.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on. | |||||||||||||
| CnqaResultsSumCompletionTime2Low | 1.3.6.1.4.1.2011.5.25.111.4.1.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. Low/High order is defined where the binary number will look as follows: ************************************************* | High order 32 bits | Low order 32 bits | ************************************************* For example the number 4294967296 would have all Low order bits as '0' and the rightmost High order bit will be 1 (zeros,1). | |||||||||||||
| CnqaResultsSumCompletionTime2High | 1.3.6.1.4.1.2011.5.25.111.4.1.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. See the nqaResultsSumCompletionTime2Low object for a definition of Low/High Order. | |||||||||||||
| CnqaResultsCompletionTimeMin | 1.3.6.1.4.1.2011.5.25.111.4.1.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test. | |||||||||||||
| CnqaResultsCompletionTimeMax | 1.3.6.1.4.1.2011.5.25.111.4.1.1.12 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test. | |||||||||||||
| CnqaResultsDisconnects | 1.3.6.1.4.1.2011.5.25.111.4.1.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of consecutive failures. For connectionless protocol type of test, this number should be zero. | |||||||||||||
| CnqaResultsTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.1.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. | |||||||||||||
| CnqaResultsBusies | 1.3.6.1.4.1.2011.5.25.111.4.1.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. | |||||||||||||
| CnqaResultsNoConnections | 1.3.6.1.4.1.2011.5.25.111.4.1.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will remain zero. This cannot occur for connectionless protocols, but may occur for connection oriented protocols, such as TCP. Since a NQA operation was never initiated, the completion time of these operations are not accumulated, nor do they increment nqaResultsCompletions. | |||||||||||||
| CnqaResultsSequenceErrors | 1.3.6.1.4.1.2011.5.25.111.4.1.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero. When this has occurred some of the possible reasons maybe: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected | |||||||||||||
| CnqaResultsDrops | 1.3.6.1.4.1.2011.5.25.111.4.1.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times probes of the test dropped due to sending or connecting failure. | |||||||||||||
| CnqaResultsAddressType | 1.3.6.1.4.1.2011.5.25.111.4.1.1.19 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). | |||||||||||||
| CnqaResultsAddress | 1.3.6.1.4.1.2011.5.25.111.4.1.1.20 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests). | |||||||||||||
| CnqaResultsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.1.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.
| |||||||||||||
| CnqaResultsSentProbes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent.
| |||||||||||||
| CnqaResultsLastGoodProbe | 1.3.6.1.4.1.2011.5.25.111.4.1.1.23 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Date and time when the last response was received for a probe. | |||||||||||||
| CnqaResultsLastGoodPath | 1.3.6.1.4.1.2011.5.25.111.4.1.1.24 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The date and time when the last complete path was determined. | |||||||||||||
| CnqaResultsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.1.1.25 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test execution.
| |||||||||||||
| CnqaResultsRttAvg | 1.3.6.1.4.1.2011.5.25.111.4.1.1.26 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaResultsLostPacketRatio | 1.3.6.1.4.1.2011.5.25.111.4.1.1.27 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| CnqaResultsRingResponseNode | 1.3.6.1.4.1.2011.5.25.111.4.1.1.28 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Ring response node ID, invalid value of 0. | |||||||||||||
| CnqaResultChangeRecord | 1.3.6.1.4.1.2011.5.25.111.4.1.1.29 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Records result change information for nqaResultsTestResultChangePackedNotification. | |||||||||||||
| CnqaResultsDetail | 1.3.6.1.4.1.2011.5.25.111.4.1.1.30 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates detailed result information about the test instance. | |||||||||||||
| CnqaResultsChangeToFailureTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.31 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsChangeToSuccessTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.32 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsChangeToNoResultTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.33 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsChangeToNegotiationFailureTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.34 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsChangeToAbnormalTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.35 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsFailureTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.36 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsSuccessTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.37 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsNoResultTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.38 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsNegotiationFailureTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.39 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsAbnormalTimes | 1.3.6.1.4.1.2011.5.25.111.4.1.1.40 | Gauge32 | AN | ||||||||||
column · Gauge32 · accessible-for-notify · current Records result change information for nqaResultsTestResultChangeNotification. | |||||||||||||
| CnqaResultsLastCompletions | 1.3.6.1.4.1.2011.5.25.111.4.1.1.41 | INTEGER | AN | ||||||||||
column · INTEGER · accessible-for-notify · current The status of test.
| |||||||||||||
| CnqaResultsTestType | 1.3.6.1.4.1.2011.5.25.111.4.1.1.42 | INTEGER | AN | ||||||||||
column · INTEGER · accessible-for-notify · current Test type.
| |||||||||||||
| CnqaResultsSourceIP | 1.3.6.1.4.1.2011.5.25.111.4.1.1.43 | DisplayString | AN | ||||||||||
column · DisplayString · accessible-for-notify · current Source IP. | |||||||||||||
| CnqaResultsSourceIfName | 1.3.6.1.4.1.2011.5.25.111.4.1.1.44 | DisplayString | AN | ||||||||||
column · DisplayString · accessible-for-notify · current Source interface name. | |||||||||||||
| CnqaResultsDestinationIP | 1.3.6.1.4.1.2011.5.25.111.4.1.1.45 | DisplayString | AN | ||||||||||
column · DisplayString · accessible-for-notify · current Destiation IP. | |||||||||||||
| TnqaHTTPStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.2 | NA | |||||||||||
table · not-accessible · current The statistics collection database.
Defines the HTTP Operations Statistics Table for
storing the statistics of a HTTP test. | |||||||||||||
| RnqaHTTPStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.2.1 | NA | |||||||||||
row · not-accessible · current Defines an entry in the nqaHTTPStatsTable. | |||||||||||||
| CnqaHTTPStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.2.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The The HTTP statistics table index and times of dispatching dependency tests. | |||||||||||||
| CnqaHTTPStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of HTTP test.
| |||||||||||||
| CnqaHTTPStatsRTDOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.2.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of HTTP operations RTD (Round Trip Delay) that violate threshold. | |||||||||||||
| CnqaHTTPStatsRTTSum | 1.3.6.1.4.1.2011.5.25.111.4.2.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of delay time of successful HTTP probes, including the sum of time of DNS query, TCP establishment and packets transmission. | |||||||||||||
| CnqaHTTPStatsRTTMin | 1.3.6.1.4.1.2011.5.25.111.4.2.1.5 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum value of HTTP probe time. | |||||||||||||
| CnqaHTTPStatsRTTMax | 1.3.6.1.4.1.2011.5.25.111.4.2.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum value of HTTP probe time. | |||||||||||||
| CnqaHTTPStatsDNSRTTSum | 1.3.6.1.4.1.2011.5.25.111.4.2.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of DNS query time. | |||||||||||||
| CnqaHTTPStatsDNSRTTMin | 1.3.6.1.4.1.2011.5.25.111.4.2.1.8 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of DNS query time. | |||||||||||||
| CnqaHTTPStatsDNSRTTMax | 1.3.6.1.4.1.2011.5.25.111.4.2.1.9 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of DNS query time. | |||||||||||||
| CnqaHTTPStatsTCPConnectRTTSum | 1.3.6.1.4.1.2011.5.25.111.4.2.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of TCP connection time. | |||||||||||||
| CnqaHTTPStatsTCPConnectRTTMin | 1.3.6.1.4.1.2011.5.25.111.4.2.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum value of TCP connection time. | |||||||||||||
| CnqaHTTPStatsTCPConnectRTTMax | 1.3.6.1.4.1.2011.5.25.111.4.2.1.12 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum value of TCP connection time. | |||||||||||||
| CnqaHTTPStatsTransactionRTTSum | 1.3.6.1.4.1.2011.5.25.111.4.2.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of transaction time. | |||||||||||||
| CnqaHTTPStatsTransactionRTTMin | 1.3.6.1.4.1.2011.5.25.111.4.2.1.14 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum value of transaction time. | |||||||||||||
| CnqaHTTPStatsTransactionRTTMax | 1.3.6.1.4.1.2011.5.25.111.4.2.1.15 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum value of transaction time. | |||||||||||||
| CnqaHTTPStatsMessageBodyOctetsSum | 1.3.6.1.4.1.2011.5.25.111.4.2.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of the size of the message body received as a response to the HTTP request. | |||||||||||||
| CnqaHTTPStatsDNSServerTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.2.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of requests that timed out during DNS query. | |||||||||||||
| CnqaHTTPStatsTCPConnectTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.2.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of requests that timed out during HTTP connection. | |||||||||||||
| CnqaHTTPStatsTransactionTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.2.1.19 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of requests that timed out during HTTP transaction. | |||||||||||||
| CnqaHTTPStatsDNSQueryErrors | 1.3.6.1.4.1.2011.5.25.111.4.2.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of requests that had DNS query errors. | |||||||||||||
| CnqaHTTPStatsErrors | 1.3.6.1.4.1.2011.5.25.111.4.2.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of HTTP transaction failures. | |||||||||||||
| CnqaHTTPStatsTcpConnErrors | 1.3.6.1.4.1.2011.5.25.111.4.2.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of TCP connection failures. | |||||||||||||
| CnqaHTTPStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.2.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received. | |||||||||||||
| CnqaHTTPStatsSendProbes | 1.3.6.1.4.1.2011.5.25.111.4.2.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of sending probes. | |||||||||||||
| CnqaHTTPStatsBusies | 1.3.6.1.4.1.2011.5.25.111.4.2.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a HTTP operation could not be initiated because an internal error. | |||||||||||||
| CnqaHTTPStatsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.2.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test execution.
| |||||||||||||
| CnqaHTTPStatsRttAvg | 1.3.6.1.4.1.2011.5.25.111.4.2.1.27 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaHTTPStatsLostPacketRatio | 1.3.6.1.4.1.2011.5.25.111.4.2.1.28 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| TnqaJitterStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.3 | NA | |||||||||||
table · not-accessible · current Description: nqaJitterStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the following conditions are met. A GET operation is performed. The test instance type must be ICMP, UDP, or TCP. | |||||||||||||
| RnqaJitterStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.3.1 | NA | |||||||||||
row · not-accessible · current A table which contains the status of latest Jitter operation. This entry is created only if the nqaAdminCtrlType is jitterAppl. | |||||||||||||
| CnqaJitterStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.3.1.1 | Integer32 (0..2147483647) | NA | ||||||||||
column · Integer32 (0..2147483647) · not-accessible · current The third index of jitter statistics table. | |||||||||||||
| CnqaJitterStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.3.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of the test, which value can be noResult (0), success (1), failure (2) or negotiateFailed (3). If the test is still running, the value will be noResult (0).
| |||||||||||||
| CnqaJitterStatsRTDOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.3.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate RTD (Round Trip Delay) threshold. | |||||||||||||
| CnqaJitterStatsNumOfRTT | 1.3.6.1.4.1.2011.5.25.111.4.3.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of RTTs that are successfully measured by tests. | |||||||||||||
| CnqaJitterStatsRTTSum | 1.3.6.1.4.1.2011.5.25.111.4.3.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of RTTs that are successfully measured. | |||||||||||||
| CnqaJitterStatsRTTSum2Low | 1.3.6.1.4.1.2011.5.25.111.4.3.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of RTTs that are successfully measured by tests (low order 32 bits). | |||||||||||||
| CnqaJitterStatsRTTSum2High | 1.3.6.1.4.1.2011.5.25.111.4.3.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of RTTs that are successfully measured by tests (high order 32 bits). | |||||||||||||
| CnqaJitterStatsRTTMin | 1.3.6.1.4.1.2011.5.25.111.4.3.1.8 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterStatsRTTMax | 1.3.6.1.4.1.2011.5.25.111.4.3.1.9 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterStatsMinOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.10 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute value of all positive jitter values from source to destination. | |||||||||||||
| CnqaJitterStatsMaxOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute value of all positive jitter values from source to destination. | |||||||||||||
| CnqaJitterStatsNumOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all positive jitter values from source to destination. | |||||||||||||
| CnqaJitterStatsSumOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of absolute value of all positive jitter values from source to destination. | |||||||||||||
| CnqaJitterStatsSum2OfPositivesSDLow | 1.3.6.1.4.1.2011.5.25.111.4.3.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits). | |||||||||||||
| CnqaJitterStatsSum2OfPositivesSDHigh | 1.3.6.1.4.1.2011.5.25.111.4.3.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits). | |||||||||||||
| CnqaJitterStatsMinOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.16 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute value of all negative jitter values from source to destination. | |||||||||||||
| CnqaJitterStatsMaxOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.17 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute value of all negative jitter values from source to destination. | |||||||||||||
| CnqaJitterStatsNumOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all negative jitter values from source to destination. | |||||||||||||
| CnqaJitterStatsSumOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.19 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of absolute value of all negative jitter values from source to destination. | |||||||||||||
| CnqaJitterStatsSum2OfNegativesSDLow | 1.3.6.1.4.1.2011.5.25.111.4.3.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all negative values from source to destination (low order 32 bits). | |||||||||||||
| CnqaJitterStatsSum2OfNegativesSDHigh | 1.3.6.1.4.1.2011.5.25.111.4.3.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all negative values from source to destination (high order 32 bits). | |||||||||||||
| CnqaJitterStatsMinOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.22 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute value of all positive jitter values from destination to source. | |||||||||||||
| CnqaJitterStatsMaxOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.23 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute value of all positive jitter values from destination to source. | |||||||||||||
| CnqaJitterStatsNumOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all positive jitter values from destination to source. | |||||||||||||
| CnqaJitterStatsSumOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of absolute value of all positive jitter values from destination to source. | |||||||||||||
| CnqaJitterStatsSum2OfPositivesDSLow | 1.3.6.1.4.1.2011.5.25.111.4.3.1.26 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits). | |||||||||||||
| CnqaJitterStatsSum2OfPositivesDSHigh | 1.3.6.1.4.1.2011.5.25.111.4.3.1.27 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits). | |||||||||||||
| CnqaJitterStatsMinOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.28 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute value of all negative jitter values from destination to source. | |||||||||||||
| CnqaJitterStatsMaxOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.29 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute value of all negative jitter values from destination to source. | |||||||||||||
| CnqaJitterStatsNumOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.30 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all negative jitter values from destination to source. | |||||||||||||
| CnqaJitterStatsSumOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.31 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of absolute value of all negative jitter values from destination to source. | |||||||||||||
| CnqaJitterStatsSum2OfNegativesDSLow | 1.3.6.1.4.1.2011.5.25.111.4.3.1.32 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all negative values from destination to source (low order 32 bits). | |||||||||||||
| CnqaJitterStatsSum2OfNegativesDSHigh | 1.3.6.1.4.1.2011.5.25.111.4.3.1.33 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all negative values from destination to source (high order 32 bits). | |||||||||||||
| CnqaJitterStatsPacketLossSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.34 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets lost when sent from source to destination. | |||||||||||||
| CnqaJitterStatsPacketLossDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.35 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets lost when sent from destination to source. | |||||||||||||
| CnqaJitterStatsPacketOutOfSequences | 1.3.6.1.4.1.2011.5.25.111.4.3.1.36 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets arrived out of sequence. | |||||||||||||
| CnqaJitterStatsErrors | 1.3.6.1.4.1.2011.5.25.111.4.3.1.37 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of errors occurred in the test. | |||||||||||||
| CnqaJitterStatsBusies | 1.3.6.1.4.1.2011.5.25.111.4.3.1.38 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a test couldn't be initialized because the previous test has not completed. | |||||||||||||
| CnqaJitterStatsTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.3.1.39 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of responses arrived over the time. | |||||||||||||
| CnqaJitterStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.3.1.40 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of responses from echo-server for the packets sent by the test. | |||||||||||||
| CnqaJitterStatsSentProbes | 1.3.6.1.4.1.2011.5.25.111.4.3.1.41 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets sent in the test. | |||||||||||||
| CnqaJitterStatsDrops | 1.3.6.1.4.1.2011.5.25.111.4.3.1.42 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets that were sent failed in the test. | |||||||||||||
| CnqaJitterStatsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.3.1.43 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the test, which value can be noFinish (0) or finish (1).
| |||||||||||||
| CnqaJitterStatsMaxDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.44 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all OWD (One Way Delay) from source to destination. | |||||||||||||
| CnqaJitterStatsMaxDelayDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.45 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all OWD (One Way Delay) from destination to source.
| |||||||||||||
| CnqaJitterStatsRTTAvg | 1.3.6.1.4.1.2011.5.25.111.4.3.1.46 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterStatsPacketLossRatio | 1.3.6.1.4.1.2011.5.25.111.4.3.1.47 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| CnqaJitterStatsAvgJitter | 1.3.6.1.4.1.2011.5.25.111.4.3.1.48 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of jitter values that were successfully measured by tests. | |||||||||||||
| CnqaJitterStatsAvgJitterSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.49 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of jitter values from source to destination that were successfully measured by tests. | |||||||||||||
| CnqaJitterStatsAvgJitterDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.50 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of jitter values from destination to source that were successfully measured by tests. | |||||||||||||
| CnqaJitterStatsJitterOut | 1.3.6.1.4.1.2011.5.25.111.4.3.1.51 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Jitter (RFC1889) at responder. | |||||||||||||
| CnqaJitterStatsJitterIn | 1.3.6.1.4.1.2011.5.25.111.4.3.1.52 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Jitter (RFC1889) at sender. | |||||||||||||
| CnqaJitterStatsOWDOverThresholdsSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.53 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate OWD (One Way Delay) threshold from source to destination. | |||||||||||||
| CnqaJitterStatsPktLossUnknown | 1.3.6.1.4.1.2011.5.25.111.4.3.1.54 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets lost for which we cannot determine the direction. | |||||||||||||
| CnqaJitterStatsNumOfOWD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.55 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of OWDs that were successfully measured by tests. | |||||||||||||
| CnqaJitterStatsOWSumSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.56 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of OWDs that were successfully measured by tests from source to destination. | |||||||||||||
| CnqaJitterStatsOWSumDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.57 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of OWDs that were successfully measured by tests from destination to source. | |||||||||||||
| CnqaJitterStatsOWDOverThresholdsDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.58 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate OWD (One Way Delay) threshold from destination to source. | |||||||||||||
| CnqaJitterStatsOperOfIcpif | 1.3.6.1.4.1.2011.5.25.111.4.3.1.59 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test. | |||||||||||||
| CnqaJitterStatsOperOfMos | 1.3.6.1.4.1.2011.5.25.111.4.3.1.60 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The MOS (Mean Opinion Score) value for the latest jitter test. | |||||||||||||
| CnqaJitterStatsMinDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.61 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all one way time from source to destination. | |||||||||||||
| CnqaJitterStatsSum2DelaySDLow | 1.3.6.1.4.1.2011.5.25.111.4.3.1.62 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The low order 32 bits of the sum of squares of one way time from source to destination. | |||||||||||||
| CnqaJitterStatsSum2DelaySDHigh | 1.3.6.1.4.1.2011.5.25.111.4.3.1.63 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of the sum of squares of one way time from source to destination. | |||||||||||||
| CnqaJitterStatsMinDelayDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.64 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all one way time from destination to source. | |||||||||||||
| CnqaJitterStatsSum2DelayDSLow | 1.3.6.1.4.1.2011.5.25.111.4.3.1.65 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The low order 32 bits of the sum of squares of one way time from destination to source. | |||||||||||||
| CnqaJitterStatsSum2DelayDSHigh | 1.3.6.1.4.1.2011.5.25.111.4.3.1.66 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of the sum of squares of one way time from destination to source. | |||||||||||||
| CnqaJitterStatsTimeUnit | 1.3.6.1.4.1.2011.5.25.111.4.3.1.67 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The unit of the timestamp, ms or us.
| |||||||||||||
| CnqaJitterStatsAvgDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.68 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of one way time from source to destination. | |||||||||||||
| CnqaJitterStatsAvgDelayDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.69 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of one way time from destination to source. | |||||||||||||
| CnqaJitterStatsPktRewriteNum | 1.3.6.1.4.1.2011.5.25.111.4.3.1.70 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets have been rewrited. | |||||||||||||
| CnqaJitterStatsPktRewriteRatio | 1.3.6.1.4.1.2011.5.25.111.4.3.1.71 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of packets have been rewrited. | |||||||||||||
| CnqaJitterStatsPktDisorderNum | 1.3.6.1.4.1.2011.5.25.111.4.3.1.72 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets have been disordered. | |||||||||||||
| CnqaJitterStatsPktDisorderRatio | 1.3.6.1.4.1.2011.5.25.111.4.3.1.73 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of packets have been disordered. | |||||||||||||
| CnqaJitterStatsFragPktDisorderNum | 1.3.6.1.4.1.2011.5.25.111.4.3.1.74 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets whose fragments have been disordered. | |||||||||||||
| CnqaJitterStatsFragPktDisorderRatio | 1.3.6.1.4.1.2011.5.25.111.4.3.1.75 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of packets whose fragments have been disordered. | |||||||||||||
| CnqaJitterStatsJitterOverThresholdsSD | 1.3.6.1.4.1.2011.5.25.111.4.3.1.76 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate jitter threshold from source to destination. | |||||||||||||
| CnqaJitterStatsJitterOverThresholdsDS | 1.3.6.1.4.1.2011.5.25.111.4.3.1.77 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate jitter threshold from destination to source. | |||||||||||||
| CnqaJitterStatsOverallOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.3.1.78 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that overall violate jitter threshold. | |||||||||||||
| CnqaJitterStatsStartTime | 1.3.6.1.4.1.2011.5.25.111.4.3.1.79 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the time when the Jitter test started. | |||||||||||||
| CnqaJitterStatsEndTime | 1.3.6.1.4.1.2011.5.25.111.4.3.1.80 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the time when the Jitter test ended. | |||||||||||||
| CnqaJitterStatsResultDetail | 1.3.6.1.4.1.2011.5.25.111.4.3.1.81 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates detailed result information about the test instance. | |||||||||||||
| TnqaFTPStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.4 | NA | |||||||||||
table · not-accessible · current The statistics collection database.
Defines the FTP Operations Statistics Table for
storing the statistics of a FTP test. | |||||||||||||
| RnqaFTPStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.4.1 | NA | |||||||||||
row · not-accessible · current Defines an entry in the nqaFTPStatsTable. | |||||||||||||
| CnqaFTPStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.4.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current FTP statistics table index and times of dispatching dependency tests. | |||||||||||||
| CnqaFTPStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.4.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of FTP test.
| |||||||||||||
| CnqaFTPStatsRTDOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.4.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of successful statistics test RTD (Round Trip Delay) over the threshold. | |||||||||||||
| CnqaFTPStatsCtrlConnMaxTime | 1.3.6.1.4.1.2011.5.25.111.4.4.1.4 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum value of the control connection time.
| |||||||||||||
| CnqaFTPStatsCtrlConnMinTime | 1.3.6.1.4.1.2011.5.25.111.4.4.1.5 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum value of the control connection time.
| |||||||||||||
| CnqaFTPStatsCtrlConnAveTime | 1.3.6.1.4.1.2011.5.25.111.4.4.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average value of the control connection time.
| |||||||||||||
| CnqaFTPStatsDataConnMaxTime | 1.3.6.1.4.1.2011.5.25.111.4.4.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum value of the data connection time.
| |||||||||||||
| CnqaFTPStatsDataConnMinTime | 1.3.6.1.4.1.2011.5.25.111.4.4.1.8 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum value of the data connection time.
| |||||||||||||
| CnqaFTPStatsDataConnAveTime | 1.3.6.1.4.1.2011.5.25.111.4.4.1.9 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average value of the data connection time.
| |||||||||||||
| CnqaFTPStatsConnectSumTimeMax | 1.3.6.1.4.1.2011.5.25.111.4.4.1.10 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum value of the FTP probe time.
| |||||||||||||
| CnqaFTPStatsConnectSumTimeMin | 1.3.6.1.4.1.2011.5.25.111.4.4.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The mininum value of the FTP probe time.
| |||||||||||||
| CnqaFTPStatsConnectSumTimeAve | 1.3.6.1.4.1.2011.5.25.111.4.4.1.12 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average value of the FTP probe time.
| |||||||||||||
| CnqaFTPStatsMessageBodyOctetsSum | 1.3.6.1.4.1.2011.5.25.111.4.4.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The accumulated octets of a FTP test. | |||||||||||||
| CnqaFTPStatsErrors | 1.3.6.1.4.1.2011.5.25.111.4.4.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of some other errors. | |||||||||||||
| CnqaFTPStatsTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.4.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a FTP operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. | |||||||||||||
| CnqaFTPStatsDiscontinued | 1.3.6.1.4.1.2011.5.25.111.4.4.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a FTP test was interrupted by the user. | |||||||||||||
| CnqaFTPStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.4.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received. | |||||||||||||
| CnqaFTPStatsSendProbes | 1.3.6.1.4.1.2011.5.25.111.4.4.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of sending probe | |||||||||||||
| CnqaFTPStatsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.4.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test execution.
| |||||||||||||
| CnqaFTPStatsRttAvg | 1.3.6.1.4.1.2011.5.25.111.4.4.1.20 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaFTPStatsLostPacketRatio | 1.3.6.1.4.1.2011.5.25.111.4.4.1.21 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| TnqaMpingStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.5 | NA | |||||||||||
table · not-accessible · current The statistics collection database.
Defines the Mping Operations Statistics Table for
storing the statistics of a Mping test. | |||||||||||||
| RnqaMpingStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.5.1 | NA | |||||||||||
row · not-accessible · current Defines an entry in the nqaMpingStatsTable. | |||||||||||||
| CnqaMpingStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.5.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of mping statistics table, and the times of dispatching dependency tests. | |||||||||||||
| CnqaMpingStatsReceiverIndex | 1.3.6.1.4.1.2011.5.25.111.4.5.1.2 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of receiver ,that received the mping request packet and response the reply packet . | |||||||||||||
| CnqaMpingStatsTargetAddressType | 1.3.6.1.4.1.2011.5.25.111.4.5.1.3 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). | |||||||||||||
| CnqaMpingStatsTargetAddress | 1.3.6.1.4.1.2011.5.25.111.4.5.1.4 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address . | |||||||||||||
| CnqaMpingStatsReceiverAddress | 1.3.6.1.4.1.2011.5.25.111.4.5.1.5 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The address of mping receiver | |||||||||||||
| CnqaMpingStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.5.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test.
| |||||||||||||
| CnqaMpingStatsRTDOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.5.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of successful statistics test RTD (Round Trip Delay) over the threshold. | |||||||||||||
| CnqaMpingStatsSumCompletionTime | 1.3.6.1.4.1.2011.5.25.111.4.5.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of RTT (response time) of sent packets. | |||||||||||||
| CnqaMpingStatsSumCompletionTime2Low | 1.3.6.1.4.1.2011.5.25.111.4.5.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of the sum of squares of RTT (response time) for each packet of test execution. | |||||||||||||
| CnqaMpingStatsSumCompletionTime2High | 1.3.6.1.4.1.2011.5.25.111.4.5.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of the sum of squares of RTT (response time) for each packet of test execution. | |||||||||||||
| CnqaMpingStatsCompletionTimeMin | 1.3.6.1.4.1.2011.5.25.111.4.5.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum RTT of all packets for executing a test. | |||||||||||||
| CnqaMpingStatsCompletionTimeMax | 1.3.6.1.4.1.2011.5.25.111.4.5.1.12 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum RTT of all packets in executing a test. | |||||||||||||
| CnqaMpingStatsTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.5.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. | |||||||||||||
| CnqaMpingStatsBusies | 1.3.6.1.4.1.2011.5.25.111.4.5.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. | |||||||||||||
| CnqaMpingStatsSequenceErrors | 1.3.6.1.4.1.2011.5.25.111.4.5.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times that sequence error happends. | |||||||||||||
| CnqaMpingStatsDrops | 1.3.6.1.4.1.2011.5.25.111.4.5.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times probes of the test dropped due to sending or connecting failure . | |||||||||||||
| CnqaMpingStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.5.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of received response packets. | |||||||||||||
| CnqaMpingStatsSentProbes | 1.3.6.1.4.1.2011.5.25.111.4.5.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of sent packets. | |||||||||||||
| CnqaMpingStatsLastGoodProbe | 1.3.6.1.4.1.2011.5.25.111.4.5.1.19 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Date and time when the last response was received for a probe. | |||||||||||||
| CnqaMpingStatsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.5.1.20 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test execution.
| |||||||||||||
| CnqaMpingStatsReceiverCount | 1.3.6.1.4.1.2011.5.25.111.4.5.1.21 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The current serial number of receivers. | |||||||||||||
| CnqaMpingStatsLastFibHit | 1.3.6.1.4.1.2011.5.25.111.4.5.1.22 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Whether the fib is hit on the device when receiving the last packet. | |||||||||||||
| CnqaMpingStatsRttAvg | 1.3.6.1.4.1.2011.5.25.111.4.5.1.23 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaMpingStatsLostPacketRatio | 1.3.6.1.4.1.2011.5.25.111.4.5.1.24 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| TnqaMtracertStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.6 | NA | |||||||||||
table · not-accessible · current The statistics collection database.
Defines the Mping Operations Statistics Table for
storing the statistics of a Mping test. | |||||||||||||
| RnqaMtracertStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.6.1 | NA | |||||||||||
row · not-accessible · current The operation of this table is same as that of nqaResultsTable. | |||||||||||||
| CnqaMtracertStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.6.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of mping statistics table, and the times of dispatching dependency tests. | |||||||||||||
| CnqaMtracertStatsHopIndex | 1.3.6.1.4.1.2011.5.25.111.4.6.1.2 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The index of Mtracert hop | |||||||||||||
| CnqaMtracertStatsAddressType | 1.3.6.1.4.1.2011.5.25.111.4.6.1.3 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). | |||||||||||||
| CnqaMtracertStatsAddress | 1.3.6.1.4.1.2011.5.25.111.4.6.1.4 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address (TraceRoute is the source address of the last valuable response package). | |||||||||||||
| CnqaMtracertStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.6.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test.
| |||||||||||||
| CnqaMtracertStatsCurHopCount | 1.3.6.1.4.1.2011.5.25.111.4.6.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current It is equal to the hop count index executed by current tests. The default value is 0. | |||||||||||||
| CnqaMtracertStatsCurProbeCount | 1.3.6.1.4.1.2011.5.25.111.4.6.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The total count of probe packets in a hop count index. | |||||||||||||
| CnqaMtracertStatsRTDOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.6.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of successful statistics test RTD (Round Trip Delay) over the threshold. | |||||||||||||
| CnqaMtracertStatsTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.6.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. | |||||||||||||
| CnqaMtracertStatsBusies | 1.3.6.1.4.1.2011.5.25.111.4.6.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. | |||||||||||||
| CnqaMtracertStatsSequenceErrors | 1.3.6.1.4.1.2011.5.25.111.4.6.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times that sequence error happends. | |||||||||||||
| CnqaMtracertStatsDrops | 1.3.6.1.4.1.2011.5.25.111.4.6.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times probes of the test dropped due to sending or connecting failure . | |||||||||||||
| CnqaMtracertStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.6.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of received response packets. | |||||||||||||
| CnqaMtracertStatsSentProbes | 1.3.6.1.4.1.2011.5.25.111.4.6.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of sent packets. | |||||||||||||
| CnqaMtracertStatsLastGoodProbe | 1.3.6.1.4.1.2011.5.25.111.4.6.1.15 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Date and time when the last response was received for a probe. | |||||||||||||
| CnqaMtracertStatsLastGoodPath | 1.3.6.1.4.1.2011.5.25.111.4.6.1.16 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The date and time when the last complete path was determined. | |||||||||||||
| CnqaMtracertStatsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.6.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test execution.
| |||||||||||||
| CnqaMtracertStatsCurPathTTL | 1.3.6.1.4.1.2011.5.25.111.4.6.1.18 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The TTL(time to live) of the current path. | |||||||||||||
| CnqaMtracertStatsMaxPathTTL | 1.3.6.1.4.1.2011.5.25.111.4.6.1.19 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum TTL(time to live) of the path. | |||||||||||||
| CnqaMtracertStatsInPkgLossRate | 1.3.6.1.4.1.2011.5.25.111.4.6.1.20 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The loss rate of the incoming packets. | |||||||||||||
| CnqaMtracertStatsSGPkgLossRate | 1.3.6.1.4.1.2011.5.25.111.4.6.1.21 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The loss rate of the packets from source to multicast group. | |||||||||||||
| CnqaMtracertStatsInPkgRate | 1.3.6.1.4.1.2011.5.25.111.4.6.1.22 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The rate of incoming packets. | |||||||||||||
| CnqaMtracertStatsOutPkgRate | 1.3.6.1.4.1.2011.5.25.111.4.6.1.23 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The rate of outgoing packets. | |||||||||||||
| CnqaMtracertStatsTimeDelay | 1.3.6.1.4.1.2011.5.25.111.4.6.1.24 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The time delay of packets from hop to hop. | |||||||||||||
| TnqaPathMtuStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.7 | NA | |||||||||||
table · not-accessible · current The statistics collection database. Defines the path MTU Operations Statistics Table for storing the statistics of a path MTU test. | |||||||||||||
| RnqaPathMtuStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.7.1 | NA | |||||||||||
row · not-accessible · current Defines an entry in the nqaPathMtuStatsTable. | |||||||||||||
| CnqaPathMtuStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.7.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of path MTU statistics table, and the times of dispatching dependency tests. | |||||||||||||
| CnqaPathMtuStatsAddressType | 1.3.6.1.4.1.2011.5.25.111.4.7.1.2 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). | |||||||||||||
| CnqaPathMtuStatsAddress | 1.3.6.1.4.1.2011.5.25.111.4.7.1.3 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address. It is the source address of the ICMP echo reply packet. | |||||||||||||
| CnqaPathMtuStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.7.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test.
| |||||||||||||
| CnqaPathMtuStatsSentProbes | 1.3.6.1.4.1.2011.5.25.111.4.7.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of sent packets. | |||||||||||||
| CnqaPathMtuStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.7.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of received response packets. | |||||||||||||
| CnqaPathMtuStatsDiscoveryPathMtuMin | 1.3.6.1.4.1.2011.5.25.111.4.7.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The initial length of packet in the path MTU test. It is the minimal length of a ICMP packet. | |||||||||||||
| CnqaPathMtuStatsDiscoveryPathMtuMax | 1.3.6.1.4.1.2011.5.25.111.4.7.1.8 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximal length of packet in the path MTU test. It is the maximal MTU of local out-interface. | |||||||||||||
| CnqaPathMtuStatsOptimumFirstStep | 1.3.6.1.4.1.2011.5.25.111.4.7.1.9 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The optimum first step of the path MTU test. It will take effect if the specified step is lower than it. | |||||||||||||
| CnqaPathMtuStatsBusies | 1.3.6.1.4.1.2011.5.25.111.4.7.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. | |||||||||||||
| CnqaPathMtuStatsTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.7.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. | |||||||||||||
| CnqaPathMtuStatsDrops | 1.3.6.1.4.1.2011.5.25.111.4.7.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times probes of the test dropped due to sending or connecting failure. | |||||||||||||
| CnqaPathMtuStatsPathMtu | 1.3.6.1.4.1.2011.5.25.111.4.7.1.13 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The value of current path MTU. | |||||||||||||
| CnqaPathMtuStatsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.7.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test execution.
| |||||||||||||
| TnqaPathJitterStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.8 | NA | |||||||||||
table · not-accessible · current A table which contains the status of latest path jitter operation. | |||||||||||||
| RnqaPathJitterStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.8.1 | NA | |||||||||||
row · not-accessible · current A table which contains the status of latest path jitter operation. This entry is created only if the nqaAdminCtrlType is path jitter. | |||||||||||||
| CnqaPathJitterStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.8.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of path jitter statistics table, and the times of dispatching dependency tests. | |||||||||||||
| CnqaPathJitterStatsHopIndex | 1.3.6.1.4.1.2011.5.25.111.4.8.1.2 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The index of path jitter hop. | |||||||||||||
| CnqaPathJitterStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.8.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of path jitter test.
| |||||||||||||
| CnqaPathJitterStatsAddressType | 1.3.6.1.4.1.2011.5.25.111.4.8.1.4 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The destination address type in a hop of path jitter test, and the value range can be unknown(0), ipv4(1) and dns(16). | |||||||||||||
| CnqaPathJitterStatsAddress | 1.3.6.1.4.1.2011.5.25.111.4.8.1.5 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsRtdOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.8.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of successful executions who's RTD over the threshold in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsNumOfRtt | 1.3.6.1.4.1.2011.5.25.111.4.8.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times that statistics RTT successfully in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsRttSum | 1.3.6.1.4.1.2011.5.25.111.4.8.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of RTTs in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsRttSum2Low | 1.3.6.1.4.1.2011.5.25.111.4.8.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsRttSum2High | 1.3.6.1.4.1.2011.5.25.111.4.8.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsRttMin | 1.3.6.1.4.1.2011.5.25.111.4.8.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of RTTs that successfully measured in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsRttMax | 1.3.6.1.4.1.2011.5.25.111.4.8.1.12 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of RTTs that successfully measured in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsMinOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.13 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsMaxOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.14 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsNumOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSumOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSum2OfPositivesSDLow | 1.3.6.1.4.1.2011.5.25.111.4.8.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of square sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSum2OfPositivesSDHigh | 1.3.6.1.4.1.2011.5.25.111.4.8.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of square sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsMinOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.19 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsMaxOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.20 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsNumOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSumOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSum2OfNegativesSDLow | 1.3.6.1.4.1.2011.5.25.111.4.8.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of square sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSum2OfNegativesSDHigh | 1.3.6.1.4.1.2011.5.25.111.4.8.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of square sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsMinOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.25 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsMaxOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.26 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsNumOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.27 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSumOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.28 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSum2OfPositivesDSLow | 1.3.6.1.4.1.2011.5.25.111.4.8.1.29 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of square sum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSum2OfPositivesDSHigh | 1.3.6.1.4.1.2011.5.25.111.4.8.1.30 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of square sum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsMinOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.31 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsMaxOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.32 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsNumOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.33 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSumOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.34 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSum2OfNegativesDSLow | 1.3.6.1.4.1.2011.5.25.111.4.8.1.35 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of square sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsSum2OfNegativesDSHigh | 1.3.6.1.4.1.2011.5.25.111.4.8.1.36 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of square sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsPacketLossSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.37 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of dropped packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsPacketLossDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.38 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of dropped packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsPacketOutOfSequences | 1.3.6.1.4.1.2011.5.25.111.4.8.1.39 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets that return out of sequence. | |||||||||||||
| CnqaPathJitterStatsErrors | 1.3.6.1.4.1.2011.5.25.111.4.8.1.40 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of some other errors type. | |||||||||||||
| CnqaPathJitterStatsBusies | 1.3.6.1.4.1.2011.5.25.111.4.8.1.41 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a path jitter operation could not be initiated because an internal error. | |||||||||||||
| CnqaPathJitterStatsTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.8.1.42 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. | |||||||||||||
| CnqaPathJitterStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.8.1.43 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received. | |||||||||||||
| CnqaPathJitterStatsSentProbes | 1.3.6.1.4.1.2011.5.25.111.4.8.1.44 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The value of this object reflects the number of packets sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent. | |||||||||||||
| CnqaPathJitterStatsDrops | 1.3.6.1.4.1.2011.5.25.111.4.8.1.45 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times probes of the test dropped due to sending failure. | |||||||||||||
| CnqaPathJitterStatsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.8.1.46 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test execution.
| |||||||||||||
| CnqaPathJitterStatsMaxDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.47 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all OWD (One Way Delay) that measured from packets sent from source to destination in a hop of path jitter test.
| |||||||||||||
| CnqaPathJitterStatsMaxDelayDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.48 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all OWD (One Way Delay) that measured from packets sent from destination to source in a hop of path jitter test.
| |||||||||||||
| CnqaPathJitterStatsRttAvg | 1.3.6.1.4.1.2011.5.25.111.4.8.1.49 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of RTTs that were successfully measured in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsPacketLossRatio | 1.3.6.1.4.1.2011.5.25.111.4.8.1.50 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsAvgJitter | 1.3.6.1.4.1.2011.5.25.111.4.8.1.51 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of jitter values that were successfully measured in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsAvgJitterSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.52 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average value of jitters that measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsAvgJitterDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.53 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average value of jitters that measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsJitterOut | 1.3.6.1.4.1.2011.5.25.111.4.8.1.54 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current jitter (RFC1889) at responder. | |||||||||||||
| CnqaPathJitterStatsJitterIn | 1.3.6.1.4.1.2011.5.25.111.4.8.1.55 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Jitter (RFC1889) at sender. | |||||||||||||
| CnqaPathJitterStatsOwdOverThresholdsSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.56 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate OWD (One Way Delay) threshold from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsPktLossUnknown | 1.3.6.1.4.1.2011.5.25.111.4.8.1.57 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of lost packets for which we can't determine the direction in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsNumOfOwd | 1.3.6.1.4.1.2011.5.25.111.4.8.1.58 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of OWDs that were successfully measured in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsOwdSumSD | 1.3.6.1.4.1.2011.5.25.111.4.8.1.59 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of OWDs that were successfully measured from packets sent from source to destination in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsOwdSumDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.60 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of OWDs that were successfully measured from packets sent from destination to source in a hop of path jitter test. | |||||||||||||
| CnqaPathJitterStatsOwdOverThresholdsDS | 1.3.6.1.4.1.2011.5.25.111.4.8.1.61 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate OWD (One Way Delay) threshold from destination to source in a hop of path jitter test. | |||||||||||||
| TnqaPppoeStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.9 | NA | |||||||||||
table · not-accessible · current A table which contains the rolling accumulated history of the PPPoE operation. | |||||||||||||
| RnqaPppoeStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.9.1 | NA | |||||||||||
row · not-accessible · current A table which contains the rolling accumulated history of the PPPoE operation. This entry is created only if the nqaAdminCtrlType is pppoe. | |||||||||||||
| CnqaPppoeStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.9.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of PPPoE statistics table, and the executing times of dispatching dependency tests. | |||||||||||||
| CnqaPppoeRedialIndex | 1.3.6.1.4.1.2011.5.25.111.4.9.1.2 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of PPPoE statistics table, and the redialing times of dispatching dependency tests. | |||||||||||||
| CnqaPppoeStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.9.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of PPPoE operation.
| |||||||||||||
| CnqaPppoeStatsCurrentPhase | 1.3.6.1.4.1.2011.5.25.111.4.9.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current phase of PPPoE operation.
| |||||||||||||
| CnqaPppoeStatsErrorMessage | 1.3.6.1.4.1.2011.5.25.111.4.9.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The error message result of PPPoE operation.
| |||||||||||||
| CnqaPppoeDiscoveryTimeout | 1.3.6.1.4.1.2011.5.25.111.4.9.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The time for discovery of PPPoE operation. | |||||||||||||
| CnqaPppoeLcpTimeout | 1.3.6.1.4.1.2011.5.25.111.4.9.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The time for lcp negotiate of PPPoE operation. | |||||||||||||
| CnqaPppoeAuthorizationTimeout | 1.3.6.1.4.1.2011.5.25.111.4.9.1.8 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The time for authentication of PPPoE operation. | |||||||||||||
| CnqaPppoeNcpTimeout | 1.3.6.1.4.1.2011.5.25.111.4.9.1.9 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The time for ncp negotiate of PPPoE operation. | |||||||||||||
| CnqaPppoeConnectionTime | 1.3.6.1.4.1.2011.5.25.111.4.9.1.10 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The time for connection of PPPoE operation. | |||||||||||||
| CnqaPppoeClientSessionId | 1.3.6.1.4.1.2011.5.25.111.4.9.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The client sessionID of PPPoE operation. | |||||||||||||
| CnqaPppoeClientIpAddress | 1.3.6.1.4.1.2011.5.25.111.4.9.1.12 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The client ip address of PPPoE operation. | |||||||||||||
| CnqaPppoeGatewayIpAddress | 1.3.6.1.4.1.2011.5.25.111.4.9.1.13 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The gateway ip address of PPPoE operation. | |||||||||||||
| TnqaRtptestStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.10 | NA | |||||||||||
table · not-accessible · current A table which contains the latest rtptest operation. | |||||||||||||
| RnqaRtptestStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.10.1 | NA | |||||||||||
row · not-accessible · current The operation of this table is same as that of nqaResultsTable. | |||||||||||||
| CnqaRtptestStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.10.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The result table index and times of dispatching dependency tests. Each test can only reserve 1 record. The result table only contains rtptest information. | |||||||||||||
| CnqaRtptestStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.10.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test.
| |||||||||||||
| CnqaRtptestStatsIpTargetAddressType | 1.3.6.1.4.1.2011.5.25.111.4.10.1.3 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The destination address type, and the value range can be unknown(0), and ipv4(1). | |||||||||||||
| CnqaRtptestStatsIpTargetAddress | 1.3.6.1.4.1.2011.5.25.111.4.10.1.4 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address of rtptest. | |||||||||||||
| CnqaRtptestStatsIpTargetPort | 1.3.6.1.4.1.2011.5.25.111.4.10.1.5 | InetPortNumber | RO | ||||||||||
column · InetPortNumber · read-only · current The target host port of rtptest. | |||||||||||||
| CnqaRtptestStatsSourceAddressType | 1.3.6.1.4.1.2011.5.25.111.4.10.1.6 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The source address type, and the value range can be unknown(0), and ipv4(1). | |||||||||||||
| CnqaRtptestStatsIpSourceAddress | 1.3.6.1.4.1.2011.5.25.111.4.10.1.7 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The source address of rtptest. | |||||||||||||
| CnqaRtptestStatsIpSourcePort | 1.3.6.1.4.1.2011.5.25.111.4.10.1.8 | InetPortNumber | RO | ||||||||||
column · InetPortNumber · read-only · current The source port of rtptest. | |||||||||||||
| CnqaRtptestStatsMinRtt | 1.3.6.1.4.1.2011.5.25.111.4.10.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The min of RTT that are successfully measured. | |||||||||||||
| CnqaRtptestStatsMaxRtt | 1.3.6.1.4.1.2011.5.25.111.4.10.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The max of RTT that are successfully measured. | |||||||||||||
| CnqaRtptestStatsAverageRtt | 1.3.6.1.4.1.2011.5.25.111.4.10.1.11 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of RTTs that are successfully measured. | |||||||||||||
| CnqaRtptestStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.10.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of responses from echo-server for the packets sent by the test. | |||||||||||||
| CnqaRtptestStatsSentProbes | 1.3.6.1.4.1.2011.5.25.111.4.10.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of the packets sent by the test. | |||||||||||||
| CnqaRtptestStatsMaxJitter | 1.3.6.1.4.1.2011.5.25.111.4.10.1.14 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The max of jitter value that are successfully measured. | |||||||||||||
| CnqaRtptestStatsMinJitter | 1.3.6.1.4.1.2011.5.25.111.4.10.1.15 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The min of jitter value that are successfully measured. | |||||||||||||
| CnqaRtptestStatsAvgJitter | 1.3.6.1.4.1.2011.5.25.111.4.10.1.16 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of jitter value that are successfully measured. | |||||||||||||
| CnqaRtptestStatsLostPacketRatio | 1.3.6.1.4.1.2011.5.25.111.4.10.1.17 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| CnqaRtptestStatsSumRtt | 1.3.6.1.4.1.2011.5.25.111.4.10.1.18 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The sum of RTTs that are successfully measured. | |||||||||||||
| CnqaRtptestStatsMinDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.10.1.19 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The minimum of One Way Delay from source to destination. | |||||||||||||
| CnqaRtptestStatsMaxDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.10.1.20 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The maximum of One Way Delay from source to destination. | |||||||||||||
| CnqaRtptestStatsAvgDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.10.1.21 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of One Way Delay from source to destination. | |||||||||||||
| CnqaRtptestStatsMinJitterSD | 1.3.6.1.4.1.2011.5.25.111.4.10.1.22 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The minimum of jitter value from source to destination. | |||||||||||||
| CnqaRtptestStatsMaxJitterSD | 1.3.6.1.4.1.2011.5.25.111.4.10.1.23 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The maximum of jitter value from source to destination. | |||||||||||||
| CnqaRtptestStatsAvgJitterSD | 1.3.6.1.4.1.2011.5.25.111.4.10.1.24 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of jitter value from source to destination. | |||||||||||||
| CnqaRtptestStatsLossRateSD | 1.3.6.1.4.1.2011.5.25.111.4.10.1.25 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The ratio of the packets lost to all packets from source to destination. | |||||||||||||
| CnqaRtptestStatsIPDVSD | 1.3.6.1.4.1.2011.5.25.111.4.10.1.26 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The IPDV(Inter Packet Delay Variation) value from source to destination. | |||||||||||||
| TnqaRtplistenStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.11 | NA | |||||||||||
table · not-accessible · current Defines the test Results Extend Table for providing the capability of performing test operations at a middle host. The results of these operations are stored in the nqaRtplistenStatsTable . The operation of this table is same as that of nqaResultsTable. | |||||||||||||
| RnqaRtplistenStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.11.1 | NA | |||||||||||
row · not-accessible · current The operation of this table is same as that of nqaResultsTable. | |||||||||||||
| CnqaRtplistenStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.11.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The result table index and times of dispatching dependency tests. Each test can only reserve 1 records. | |||||||||||||
| CnqaRtplistenStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.11.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test.
| |||||||||||||
| CnqaRtplistenStatsIpTargetAddressType | 1.3.6.1.4.1.2011.5.25.111.4.11.1.3 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The destination address type, and the value range can be unknown(0), and ipv4(1) | |||||||||||||
| CnqaRtplistenStatsIpTargetAddress | 1.3.6.1.4.1.2011.5.25.111.4.11.1.4 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address of rtpsnoop. | |||||||||||||
| CnqaRtplistenStatsIpTargetPort | 1.3.6.1.4.1.2011.5.25.111.4.11.1.5 | InetPortNumber | RO | ||||||||||
column · InetPortNumber · read-only · current The target host port of rtpsnoop. | |||||||||||||
| CnqaRtplistenStatsSourceAddressType | 1.3.6.1.4.1.2011.5.25.111.4.11.1.6 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The source address type, and the value range can be unknown(0), and ipv4(1). | |||||||||||||
| CnqaRtplistenStatsIpSourceAddress | 1.3.6.1.4.1.2011.5.25.111.4.11.1.7 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The source address of rtpsnoop. | |||||||||||||
| CnqaRtplistenStatsIpSourcePort | 1.3.6.1.4.1.2011.5.25.111.4.11.1.8 | InetPortNumber | RO | ||||||||||
column · InetPortNumber · read-only · current The source port of rtpsnoop. | |||||||||||||
| CnqaRtplistenStatsDSField | 1.3.6.1.4.1.2011.5.25.111.4.11.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The Differentiated Services (DS) field in the IP packet. The DS field is defined as the Type Of Service (TOS) octet in IPv4 header or as the Traffic Class octet in IPv6 header. | |||||||||||||
| CnqaRtplistenStatsMaxJitter | 1.3.6.1.4.1.2011.5.25.111.4.11.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The max of jitter value that are successfully measured. | |||||||||||||
| CnqaRtplistenStatsMinJitter | 1.3.6.1.4.1.2011.5.25.111.4.11.1.11 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The min of jitter value that are successfully measured. | |||||||||||||
| CnqaRtplistenStatsAvgJitter | 1.3.6.1.4.1.2011.5.25.111.4.11.1.12 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of jitter value that are successfully measured. | |||||||||||||
| CnqaRtplistenStatsLostPacketRatio | 1.3.6.1.4.1.2011.5.25.111.4.11.1.13 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| CnqaRtplistenStatsMaxLostPacketNumber | 1.3.6.1.4.1.2011.5.25.111.4.11.1.14 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The max of lost packet during the test running. | |||||||||||||
| TnqaGeneralflowStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.12 | NA | |||||||||||
table · not-accessible · current Defines the test Results Extend Table for testing throughput of network. The results of these operations are stored in the nqaGeneralflowStatsTable. | |||||||||||||
| RnqaGeneralflowStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.12.1 | NA | |||||||||||
row · not-accessible · current The operation of this table is same as that of nqaResultsTable. | |||||||||||||
| CnqaGeneralflowStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.12.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the index of the result table of the generalflow test. | |||||||||||||
| CnqaGenralflowStatsFrameSizeId | 1.3.6.1.4.1.2011.5.25.111.4.12.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Indicates the index of the packet size in the Generalflow statistics table. An index corresponds to a packet size. | |||||||||||||
| CnqaGeneralflowStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.12.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates whether the Generalflow test instance has completed the current packet size test. noResult (0) indicates that the current packet size test is running. success(1) indicates that the current packet size test has completed. failure(2) indicates that the current packet size test failed. finished(3) indicates that the current packet size test finished. running(4) indicates that the current packet size test is running. ready(5) indicates that the current packet size test has not started.
| |||||||||||||
| CnqaGeneralflowStatsResultDetail | 1.3.6.1.4.1.2011.5.25.111.4.12.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates detailed information about the current packet size test in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsTxRate | 1.3.6.1.4.1.2011.5.25.111.4.12.1.5 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the rate at which packets with the current size are sent in the Generalflow test instance, in Kbps. | |||||||||||||
| CnqaGeneralflowStatsRxRate | 1.3.6.1.4.1.2011.5.25.111.4.12.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the rate at which packets with the current size are received in the Generalflow test instance, in Kbps. | |||||||||||||
| CnqaGeneralflowStatsMinRtt | 1.3.6.1.4.1.2011.5.25.111.4.12.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the minimum RTT of the current packet size test in the Generalflow test instance, in us. | |||||||||||||
| CnqaGeneralflowStatsMaxRtt | 1.3.6.1.4.1.2011.5.25.111.4.12.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the maximum RTT of the current packet size test in the Generalflow test instance, in us. | |||||||||||||
| CnqaGeneralflowStatsAverageRtt | 1.3.6.1.4.1.2011.5.25.111.4.12.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the average RTT of the current packet size test in the Generalflow test instance, in us. | |||||||||||||
| CnqaGeneralflowStatsMaxJitter | 1.3.6.1.4.1.2011.5.25.111.4.12.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the maximum two-way jitter of the current packet size test in the Generalflow test instance, in us. | |||||||||||||
| CnqaGeneralflowStatsMinJitter | 1.3.6.1.4.1.2011.5.25.111.4.12.1.11 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the minimum two-way jitter of the current packet size test in the Generalflow test instance, in us. | |||||||||||||
| CnqaGeneralflowStatsAvgJitter | 1.3.6.1.4.1.2011.5.25.111.4.12.1.12 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the average two-way jitter of the current packet size test in the Generalflow test instance, in us. | |||||||||||||
| CnqaGeneralflowStatsTxCountLow | 1.3.6.1.4.1.2011.5.25.111.4.12.1.13 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the lower 32 bit of the number of packets with the current packet size sent in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsTxCountHigh | 1.3.6.1.4.1.2011.5.25.111.4.12.1.14 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the higher 32 bit of the number of packets with the current packet size sent in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsRxCountLow | 1.3.6.1.4.1.2011.5.25.111.4.12.1.15 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the lower 32 bit of the number of packets with the current packet size received in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsRxCountHigh | 1.3.6.1.4.1.2011.5.25.111.4.12.1.16 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the higher 32 bit of the number of packets with the current packet size received in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsFrameLossRate | 1.3.6.1.4.1.2011.5.25.111.4.12.1.17 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the packet loss ratio of the current packet size test in the Generalflow test instance,when precision is 10e-4. | |||||||||||||
| CnqaGeneralflowStatsPrecision | 1.3.6.1.4.1.2011.5.25.111.4.12.1.18 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the precision of the current packet size test in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsThroughput | 1.3.6.1.4.1.2011.5.25.111.4.12.1.19 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the throughput of the current packet size test in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsDataSize | 1.3.6.1.4.1.2011.5.25.111.4.12.1.20 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the packet size of the current packet size test in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsTestStatus | 1.3.6.1.4.1.2011.5.25.111.4.12.1.21 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates whether the tests of all packet sizes in the Generalflow test instance have completed.
| |||||||||||||
| CnqaGeneralflowStatsFrameLossRatePrecision | 1.3.6.1.4.1.2011.5.25.111.4.12.1.22 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the packet loss ratio precision of the current packet size test in the Generalflow test instance. 0 indicates in 10e-4. 1 indicates in 10e-9. | |||||||||||||
| CnqaGeneralflowStatsFrameLossRatePrecisionValue | 1.3.6.1.4.1.2011.5.25.111.4.12.1.23 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the packet loss ratio value of the current packet size test in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowStatsStartTime | 1.3.6.1.4.1.2011.5.25.111.4.12.1.24 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the time when the Generalflow test started. | |||||||||||||
| CnqaGeneralflowStatsEndTime | 1.3.6.1.4.1.2011.5.25.111.4.12.1.25 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the time when the Generalflow test ended. | |||||||||||||
| CnqaGeneralflowStatsTestTotalTime | 1.3.6.1.4.1.2011.5.25.111.4.12.1.26 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the total time (in seconds) used by the Generalflow test. | |||||||||||||
| CnqaGeneralflowStatsTestRemainingTime | 1.3.6.1.4.1.2011.5.25.111.4.12.1.27 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the remaining time (in seconds) used by the Generalflow test. | |||||||||||||
| CnqaGeneralflowStatsTestTime | 1.3.6.1.4.1.2011.5.25.111.4.12.1.28 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the time (in seconds) used by the Generalflow test. | |||||||||||||
| CnqaGeneralflowStatsEstimatedTestTime | 1.3.6.1.4.1.2011.5.25.111.4.12.1.29 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the estimated time (in seconds) used by the Generalflow test. | |||||||||||||
| CnqaGeneralflowStatsRealTestTime | 1.3.6.1.4.1.2011.5.25.111.4.12.1.30 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the real time (in seconds) used by the Generalflow test. | |||||||||||||
| CnqaGeneralflowStatsFrameRate | 1.3.6.1.4.1.2011.5.25.111.4.12.1.31 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates an Ethernet frame rate in the Generalflow test. 1: utilized line rate (L1 rate). 2: information rate (L2 rate).
| |||||||||||||
| CnqaGeneralflowStatsCurrentRateCount | 1.3.6.1.4.1.2011.5.25.111.4.12.1.32 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the count of current rate for throughput used by the Generalflow test. | |||||||||||||
| TnqaGeneralflowCurrentStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.13 | NA | |||||||||||
table · not-accessible · current Defines the current test results for generalflow test type. The results of these operations are stored in the nqaGeneralflowCurrentStatsTable. | |||||||||||||
| RnqaGeneralflowCurrentStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.13.1 | NA | |||||||||||
row · not-accessible · current The operation of this table is same as that of nqaResultsTable. | |||||||||||||
| CnqaGeneralflowCurrentStatsRateIndex | 1.3.6.1.4.1.2011.5.25.111.4.13.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This object indicates the index of the current result table of the generalflow test. | |||||||||||||
| CnqaGeneralflowCurrentStatsThroughput | 1.3.6.1.4.1.2011.5.25.111.4.13.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the current throughput of each packet size test in the Generalflow test instance. | |||||||||||||
| CnqaGeneralflowCurrentStatsFrameLossRate | 1.3.6.1.4.1.2011.5.25.111.4.13.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the current packet loss ratio of each packet size test in the Generalflow test instance, when precision is 10e-4. | |||||||||||||
| TnqaEthernetServiceStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.14 | NA | |||||||||||
table · not-accessible · current The statistics collection database. Defines the Y.1564 Operations Statistics Table for storing the statistics of a Y.1564 test. | |||||||||||||
| RnqaEthernetServiceStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.14.1 | NA | |||||||||||
row · not-accessible · current A table which contains the status of latest Y.1564 operation. The operation of this table is same as that of nqaResultsTable. | |||||||||||||
| CnqaEthernetServiceStatsIndex | 1.3.6.1.4.1.2011.5.25.111.4.14.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The index of the result table of Y.1564 test. | |||||||||||||
| CnqaEthernetServiceStatsTestFlowId | 1.3.6.1.4.1.2011.5.25.111.4.14.1.2 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The test flow ID of Y.1564 test. | |||||||||||||
| CnqaEthernetServiceStatsTestStep | 1.3.6.1.4.1.2011.5.25.111.4.14.1.3 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The index of the result table of EthernetService test step. 0: cir simple test. 1: cir step test(25% CIR). 2: cir step test(50% CIR). 3: cir step test(75% CIR). 4: cir step test(100% CIR). 5: cir/eir test with color blind mode. 6: cir/eir test with color aware mode. 7: traffic policing test with color blind mode. 8: traffic policing test with color aware mode. 9: performance test. 10: green flow in cir/eir test step. 11: yellow flow in cir/eir test step. 12: total flow in cir/eir test step. 13: green flow in Traffic policing test step. 14: yellow flow in Traffic policing test step. 15: total flow in Traffic policing test step. 16: initial step . | |||||||||||||
| CnqaEthernetServiceStatsTestProcess | 1.3.6.1.4.1.2011.5.25.111.4.14.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The status of Y.1564 test. 0 indicates running 1 indicates finished 2 indicates unknown | |||||||||||||
| CnqaEthernetServiceStatsTestStatus | 1.3.6.1.4.1.2011.5.25.111.4.14.1.5 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The result of Y.1564 test. 0 indicates pass, 1 indicates failed, 2 indicates abort, 3 indicates abnormal, 4 indicates initial | |||||||||||||
| CnqaEthernetServiceStatsTestFlowNum | 1.3.6.1.4.1.2011.5.25.111.4.14.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The number of test flow | |||||||||||||
| CnqaEthernetServiceStatsTestMode | 1.3.6.1.4.1.2011.5.25.111.4.14.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The test mode of Y.1564 test. 0 indicates roundtrip mode. | |||||||||||||
| CnqaEthernetServiceStatsTestBeginTime | 1.3.6.1.4.1.2011.5.25.111.4.14.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The begining time of Y.1564 test. | |||||||||||||
| CnqaEthernetServiceStatsTestEndTime | 1.3.6.1.4.1.2011.5.25.111.4.14.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The ending time of Y.1564 test | |||||||||||||
| CnqaEthernetServiceStatsTestTotalTime | 1.3.6.1.4.1.2011.5.25.111.4.14.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The total time of Y.1564 test. | |||||||||||||
| CnqaEthernetServiceStatsTestRealTime | 1.3.6.1.4.1.2011.5.25.111.4.14.1.11 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The real test time of Y.1564 test. | |||||||||||||
| CnqaEthernetServiceStatsResultDetail | 1.3.6.1.4.1.2011.5.25.111.4.14.1.12 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The detailed result of Y.1564 test. | |||||||||||||
| CnqaEthernetServiceStatsTestPhase | 1.3.6.1.4.1.2011.5.25.111.4.14.1.13 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Phases of Y.1564 test. 0 indicates configuration test. 1 indicates performance test. | |||||||||||||
| CnqaEthernetServiceStatsFlowBeginTime | 1.3.6.1.4.1.2011.5.25.111.4.14.1.14 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The begining time of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowEndTime | 1.3.6.1.4.1.2011.5.25.111.4.14.1.15 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The ending time of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsDisorderPacketsNum | 1.3.6.1.4.1.2011.5.25.111.4.14.1.16 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current The number of disorder packets. | |||||||||||||
| CnqaEthernetServiceStatsFlowResult | 1.3.6.1.4.1.2011.5.25.111.4.14.1.17 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The result of the test flow. 0 indicates pass. 1 indicates failed. 2 indicates abort. 3 indicates abnormal. 4 indicates initial. | |||||||||||||
| CnqaEthernetServiceStatsFlowMinIR | 1.3.6.1.4.1.2011.5.25.111.4.14.1.18 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The min IR of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowMaxIR | 1.3.6.1.4.1.2011.5.25.111.4.14.1.19 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The max IR of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowMeanIR | 1.3.6.1.4.1.2011.5.25.111.4.14.1.20 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The mean IR of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowMinFTD | 1.3.6.1.4.1.2011.5.25.111.4.14.1.21 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The min FTD of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowMaxFTD | 1.3.6.1.4.1.2011.5.25.111.4.14.1.22 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The max FTD of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowMeanFTD | 1.3.6.1.4.1.2011.5.25.111.4.14.1.23 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The mean FTD of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowMinFDV | 1.3.6.1.4.1.2011.5.25.111.4.14.1.24 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The min FDV of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowMaxFDV | 1.3.6.1.4.1.2011.5.25.111.4.14.1.25 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The max FDV of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowMeanFDV | 1.3.6.1.4.1.2011.5.25.111.4.14.1.26 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The mean FDV of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowFlCount | 1.3.6.1.4.1.2011.5.25.111.4.14.1.27 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current The frame loss count of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowFLRPrecision | 1.3.6.1.4.1.2011.5.25.111.4.14.1.28 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The FLR precision of the test flow. 0 indicates in 10e-5. | |||||||||||||
| CnqaEthernetServiceStatsFlowFLR | 1.3.6.1.4.1.2011.5.25.111.4.14.1.29 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The FLR of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowUnavailCount | 1.3.6.1.4.1.2011.5.25.111.4.14.1.30 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The unavail count of the test flow. | |||||||||||||
| CnqaEthernetServiceStatsFlowAvailPrecision | 1.3.6.1.4.1.2011.5.25.111.4.14.1.31 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The avail precision of the test flow. 0 indicates in 10e-5. | |||||||||||||
| CnqaEthernetServiceStatsFlowAVAIL | 1.3.6.1.4.1.2011.5.25.111.4.14.1.32 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The avail value of the test flow. | |||||||||||||
| TnqaJitterLatestStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.15 | NA | |||||||||||
table · not-accessible · current nqaJitterLatestStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the test instance type is jitter. | |||||||||||||
| RnqaJitterLatestStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.15.1 | NA | |||||||||||
row · not-accessible · current A table which contains the status of latest Jitter operation. | |||||||||||||
| CnqaJitterLatestStatsMaxDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.15.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The maximum of all OWD (One Way Delay) from source to destination. | |||||||||||||
| CnqaJitterLatestStatsMaxDelayDS | 1.3.6.1.4.1.2011.5.25.111.4.15.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The maximum of all OWD (One Way Delay) from destination to source. | |||||||||||||
| CnqaJitterLatestStatsAvgDelaySD | 1.3.6.1.4.1.2011.5.25.111.4.15.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of one way time from source to destination. | |||||||||||||
| CnqaJitterLatestStatsAvgDelayDS | 1.3.6.1.4.1.2011.5.25.111.4.15.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of one way time from destination to source. | |||||||||||||
| CnqaJitterLatestStatsRTTMin | 1.3.6.1.4.1.2011.5.25.111.4.15.1.5 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The minimum of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterLatestStatsRTTMax | 1.3.6.1.4.1.2011.5.25.111.4.15.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The maximum of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterLatestStatsRTTAvg | 1.3.6.1.4.1.2011.5.25.111.4.15.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterLatestStatsPacketLossRatio | 1.3.6.1.4.1.2011.5.25.111.4.15.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| CnqaJitterLatestStatsAvgJitter | 1.3.6.1.4.1.2011.5.25.111.4.15.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of jitter values that were successfully measured by tests. | |||||||||||||
| CnqaJitterLatestStatsAvgJitterSD | 1.3.6.1.4.1.2011.5.25.111.4.15.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of jitter values from source to destination that were successfully measured by tests. | |||||||||||||
| CnqaJitterLatestStatsAvgJitterDS | 1.3.6.1.4.1.2011.5.25.111.4.15.1.11 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The average of jitter values from destination to source that were successfully measured by tests. | |||||||||||||
| TnqaMultiPathResultsTable | 1.3.6.1.4.1.2011.5.25.111.4.16 | NA | |||||||||||
table · not-accessible · current Description: This table describes result information of a test instance. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the following conditions are met. A GET operation is performed. The test instance type must be LSPPING, or LSPTRACE. The nqaMultiPathResultsIndex , nqaMultiPathResultsPathIndex and nqaMultiPathResultsHopIndex values must be 0. | |||||||||||||
| RnqaMultiPathResultsEntry | 1.3.6.1.4.1.2011.5.25.111.4.16.1 | NA | |||||||||||
row · not-accessible · current The operation of this table is same as that of nqaMultiPathResultsTable. | |||||||||||||
| CnqaMultiPathResultsIndex | 1.3.6.1.4.1.2011.5.25.111.4.16.1.1 | Integer32 (0..2147483647) | NA | ||||||||||
column · Integer32 (0..2147483647) · not-accessible · current The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. | |||||||||||||
| CnqaMultiPathResultsPathIndex | 1.3.6.1.4.1.2011.5.25.111.4.16.1.2 | Integer32 (0..128) | NA | ||||||||||
column · Integer32 (0..128) · not-accessible · current The path index. | |||||||||||||
| CnqaMultiPathResultsHopIndex | 1.3.6.1.4.1.2011.5.25.111.4.16.1.3 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1. | |||||||||||||
| CnqaMultiPathResultsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.16.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test.
| |||||||||||||
| CnqaMultiPathResultsTestAttempts | 1.3.6.1.4.1.2011.5.25.111.4.16.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test attempts. The value of this object MUST be started at 0.
| |||||||||||||
| CnqaMultiPathResultsCurHopCount | 1.3.6.1.4.1.2011.5.25.111.4.16.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0.
| |||||||||||||
| CnqaMultiPathResultsCurProbeCount | 1.3.6.1.4.1.2011.5.25.111.4.16.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index.
| |||||||||||||
| CnqaMultiPathResultsRTDOverThresholds | 1.3.6.1.4.1.2011.5.25.111.4.16.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of successful statistics test RTD (Round Trip Delay) over the threshold. | |||||||||||||
| CnqaMultiPathResultsSumCompletionTime | 1.3.6.1.4.1.2011.5.25.111.4.16.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on. | |||||||||||||
| CnqaMultiPathResultsSumCompletionTime2Low | 1.3.6.1.4.1.2011.5.25.111.4.16.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. Low/High order is defined where the binary number will look as follows: ************************************************* | High order 32 bits | Low order 32 bits | ************************************************* For example the number 4294967296 would have all Low order bits as '0' and the rightmost High order bit will be 1 (zeros,1). | |||||||||||||
| CnqaMultiPathResultsSumCompletionTime2High | 1.3.6.1.4.1.2011.5.25.111.4.16.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. See the nqaResultsSumCompletionTime2Low object for a definition of Low/High Order. | |||||||||||||
| CnqaMultiPathResultsCompletionTimeMin | 1.3.6.1.4.1.2011.5.25.111.4.16.1.12 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test. | |||||||||||||
| CnqaMultiPathResultsCompletionTimeMax | 1.3.6.1.4.1.2011.5.25.111.4.16.1.13 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test. | |||||||||||||
| CnqaMultiPathResultsDisconnects | 1.3.6.1.4.1.2011.5.25.111.4.16.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of consecutive failures. For connectionless protocol type of test, this number should be zero. | |||||||||||||
| CnqaMultiPathResultsTimeouts | 1.3.6.1.4.1.2011.5.25.111.4.16.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. | |||||||||||||
| CnqaMultiPathResultsBusies | 1.3.6.1.4.1.2011.5.25.111.4.16.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. | |||||||||||||
| CnqaMultiPathResultsNoConnections | 1.3.6.1.4.1.2011.5.25.111.4.16.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will remain zero. This cannot occur for connectionless protocols, but may occur for connection oriented protocols, such as TCP. Since a NQA operation was never initiated, the completion time of these operations are not accumulated, nor do they increment nqaResultsCompletions. | |||||||||||||
| CnqaMultiPathResultsSequenceErrors | 1.3.6.1.4.1.2011.5.25.111.4.16.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero. When this has occurred some of the possible reasons maybe: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected | |||||||||||||
| CnqaMultiPathResultsDrops | 1.3.6.1.4.1.2011.5.25.111.4.16.1.19 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The times probes of the test dropped due to sending or connecting failure. | |||||||||||||
| CnqaMultiPathResultsAddressType | 1.3.6.1.4.1.2011.5.25.111.4.16.1.20 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). | |||||||||||||
| CnqaMultiPathResultsAddress | 1.3.6.1.4.1.2011.5.25.111.4.16.1.21 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests). | |||||||||||||
| CnqaMultiPathResultsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.4.16.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.
| |||||||||||||
| CnqaMultiPathResultsSentProbes | 1.3.6.1.4.1.2011.5.25.111.4.16.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent.
| |||||||||||||
| CnqaMultiPathResultsLastGoodProbe | 1.3.6.1.4.1.2011.5.25.111.4.16.1.24 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Date and time when the last response was received for a probe. | |||||||||||||
| CnqaMultiPathResultsLastGoodPath | 1.3.6.1.4.1.2011.5.25.111.4.16.1.25 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The date and time when the last complete path was determined. | |||||||||||||
| CnqaMultiPathResultsTestFinished | 1.3.6.1.4.1.2011.5.25.111.4.16.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of test execution.
| |||||||||||||
| CnqaMultiPathResultsRttAvg | 1.3.6.1.4.1.2011.5.25.111.4.16.1.27 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaMultiPathResultsLostPacketRatio | 1.3.6.1.4.1.2011.5.25.111.4.16.1.28 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| CnqaMultiPathResultsSrPolicyPreference | 1.3.6.1.4.1.2011.5.25.111.4.16.1.29 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The preference of the segment list. | |||||||||||||
| CnqaMultiPathResultsSrPolicyPathType | 1.3.6.1.4.1.2011.5.25.111.4.16.1.30 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The path type of the segment list.
| |||||||||||||
| CnqaMultiPathResultsSrPolicyProtocol | 1.3.6.1.4.1.2011.5.25.111.4.16.1.31 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The protocol of the segment list.
| |||||||||||||
| CnqaMultiPathResultsSrPolicyNodeAddress | 1.3.6.1.4.1.2011.5.25.111.4.16.1.32 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address of the segment list. | |||||||||||||
| CnqaMultiPathResultsSrPolicyDiscriminator | 1.3.6.1.4.1.2011.5.25.111.4.16.1.33 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The discriminator of the segment list. | |||||||||||||
| CnqaMultiPathResultsSrPolicySegListId | 1.3.6.1.4.1.2011.5.25.111.4.16.1.34 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The id of the segment list. | |||||||||||||
| CnqaMultiPathResultsSrPolicyXcIndex | 1.3.6.1.4.1.2011.5.25.111.4.16.1.35 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The xc index of the segment list. | |||||||||||||
| TnqaLatestStatsTable | 1.3.6.1.4.1.2011.5.25.111.4.17 | NA | |||||||||||
table · not-accessible · current nqaLatestStatsTable describes statistics about the latest network status detection using probe packets. Creation restrictions: No entry can be created in this table. Modification restrictions: The entries in this table cannot be modified. Deletion restrictions: The entries in this table cannot be deleted. Access restrictions: The entries in this table can be accessed only when the test instance type is icmp. | |||||||||||||
| RnqaLatestStatsEntry | 1.3.6.1.4.1.2011.5.25.111.4.17.1 | NA | |||||||||||
row · not-accessible · current The operation of this table is same as that of nqaLatestStatsTable. | |||||||||||||
| CnqaLatestResultsCompletions | 1.3.6.1.4.1.2011.5.25.111.4.17.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The latest status of the test.
| |||||||||||||
| CnqaLatestResultsDstAddress | 1.3.6.1.4.1.2011.5.25.111.4.17.1.2 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The latest destination address in the test. | |||||||||||||
| CnqaLatestResultSrcAddress | 1.3.6.1.4.1.2011.5.25.111.4.17.1.3 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The latest source address in the test. | |||||||||||||
| CnqaLatestResultsLostPacketRatio | 1.3.6.1.4.1.2011.5.25.111.4.17.1.4 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| NnqaHistory | 1.3.6.1.4.1.2011.5.25.111.5 | ||||||||||||
| TnqaHistoryTable | 1.3.6.1.4.1.2011.5.25.111.5.1 | NA | |||||||||||
table · not-accessible · current Defines the Remote Operations test History Table for storing the results of a test operation. | |||||||||||||
| RnqaHistoryEntry | 1.3.6.1.4.1.2011.5.25.111.5.1.1 | NA | |||||||||||
row · not-accessible · current Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax. | |||||||||||||
| CnqaHistoryIndex | 1.3.6.1.4.1.2011.5.25.111.5.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The history table index and times for dispatching dependency tests. | |||||||||||||
| CnqaHistoryHopIndex | 1.3.6.1.4.1.2011.5.25.111.5.1.1.2 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1. | |||||||||||||
| CnqaHistoryProbeIndex | 1.3.6.1.4.1.2011.5.25.111.5.1.1.3 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The probe index of tests. | |||||||||||||
| CnqaHistoryTimeStamp | 1.3.6.1.4.1.2011.5.25.111.5.1.1.4 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The start time stamp of a probe. | |||||||||||||
| CnqaHistoryAddressType | 1.3.6.1.4.1.2011.5.25.111.5.1.1.5 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The address type of history records. | |||||||||||||
| CnqaHistoryAddress | 1.3.6.1.4.1.2011.5.25.111.5.1.1.6 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address of tests. For Traceroute, it is the destination address of each hop. | |||||||||||||
| CnqaHistoryCompletionTime | 1.3.6.1.4.1.2011.5.25.111.5.1.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The amount of time from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe. | |||||||||||||
| CnqaHistoryFinishState | 1.3.6.1.4.1.2011.5.25.111.5.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of a test operation made by a remote host for a particular probe.
| |||||||||||||
| CnqaHistoryLastRC | 1.3.6.1.4.1.2011.5.25.111.5.1.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP responses are defined normally in the ip_icmp include file. | |||||||||||||
| TnqaMpingHistoryTable | 1.3.6.1.4.1.2011.5.25.111.5.2 | NA | |||||||||||
table · not-accessible · current Defines the Remote Operations Mping test History Table for storing the results of a test operation. | |||||||||||||
| RnqaMpingHistoryEntry | 1.3.6.1.4.1.2011.5.25.111.5.2.1 | NA | |||||||||||
row · not-accessible · current Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax. | |||||||||||||
| CnqaMpingHistoryIndex | 1.3.6.1.4.1.2011.5.25.111.5.2.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The Mping history table index and times for dispatching dependency tests. | |||||||||||||
| CnqaMpingHistoryReceiverIndex | 1.3.6.1.4.1.2011.5.25.111.5.2.1.2 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of receiver ,that received mping request packets and response reply packets . | |||||||||||||
| CnqaMpingHistoryResponseIndex | 1.3.6.1.4.1.2011.5.25.111.5.2.1.3 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of response packets send by receiver | |||||||||||||
| CnqaMpingHistoryAddressType | 1.3.6.1.4.1.2011.5.25.111.5.2.1.4 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The address type of history records. | |||||||||||||
| CnqaMpingHistoryAddress | 1.3.6.1.4.1.2011.5.25.111.5.2.1.5 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address of tests. | |||||||||||||
| CnqaMpingHistoryReceiverAddress | 1.3.6.1.4.1.2011.5.25.111.5.2.1.6 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The source address of response package of tests. | |||||||||||||
| CnqaMpingHistoryTimeStamp | 1.3.6.1.4.1.2011.5.25.111.5.2.1.7 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The start time stamp of a probe. | |||||||||||||
| CnqaMpingHistoryCompletionTime | 1.3.6.1.4.1.2011.5.25.111.5.2.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The completion time of a probe in milliseconds.
| |||||||||||||
| CnqaMpingHistoryFinishState | 1.3.6.1.4.1.2011.5.25.111.5.2.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of a test operation made by a remote host for a particular probe.
| |||||||||||||
| CnqaMpingHistoryLastRC | 1.3.6.1.4.1.2011.5.25.111.5.2.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The last reply code received. | |||||||||||||
| CnqaMpingHistoryFibHit | 1.3.6.1.4.1.2011.5.25.111.5.2.1.11 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Whether the fib is hit on the device which received the packet. | |||||||||||||
| TnqaMtracertHistoryTable | 1.3.6.1.4.1.2011.5.25.111.5.3 | NA | |||||||||||
table · not-accessible · current Defines the Remote MtracertOperations test History Table for storing the results of a test operation. | |||||||||||||
| RnqaMtracertHistoryEntry | 1.3.6.1.4.1.2011.5.25.111.5.3.1 | NA | |||||||||||
row · not-accessible · current Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax. | |||||||||||||
| CnqaMtracertHistoryIndex | 1.3.6.1.4.1.2011.5.25.111.5.3.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The Mtracert history table index and times for dispatching dependency tests. | |||||||||||||
| CnqaMtracertHistoryHopIndex | 1.3.6.1.4.1.2011.5.25.111.5.3.1.2 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The index of Mtracert hop. | |||||||||||||
| CnqaMtracertHistoryAddressType | 1.3.6.1.4.1.2011.5.25.111.5.3.1.3 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The address type of history records. | |||||||||||||
| CnqaMtracertHistoryAddress | 1.3.6.1.4.1.2011.5.25.111.5.3.1.4 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address of tests. For Traceroute, it is the destination address of each hop. | |||||||||||||
| CnqaMtracertHistoryTimeStamp | 1.3.6.1.4.1.2011.5.25.111.5.3.1.5 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The start time stamp of a probe. | |||||||||||||
| CnqaMtracertHistoryCompletionTime | 1.3.6.1.4.1.2011.5.25.111.5.3.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
| |||||||||||||
| CnqaMtracertHistoryLastRC | 1.3.6.1.4.1.2011.5.25.111.5.3.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP responses are defined normally in the ip_icmp include file. | |||||||||||||
| CnqaMtracertHistoryCurQueryMode | 1.3.6.1.4.1.2011.5.25.111.5.3.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current query mode.
| |||||||||||||
| CnqaMtracertHistoryQueryArrivalTime | 1.3.6.1.4.1.2011.5.25.111.5.3.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The Query Arrival Time is a 32-bit NTP timestamp specifying the arrival time of the traceroute request packet at this router. | |||||||||||||
| CnqaMtracertHistoryIncomingIfAddress | 1.3.6.1.4.1.2011.5.25.111.5.3.1.10 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current This field specifies the address of the interface on which packets from this source and group are expected to arrive, or 0 if unknown. | |||||||||||||
| CnqaMtracertHistoryOutgoingIfAddress | 1.3.6.1.4.1.2011.5.25.111.5.3.1.11 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current This field specifies the address of the interface on which packets from this source and group flow to the specified destination, or 0 if unknown. | |||||||||||||
| CnqaMtracertHistoryPreHopRouterAddress | 1.3.6.1.4.1.2011.5.25.111.5.3.1.12 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current This field specifies the router from which this router expects packets from this source. | |||||||||||||
| CnqaMtracertHistoryInputPacketCount | 1.3.6.1.4.1.2011.5.25.111.5.3.1.13 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This field contains the number of multicast packets received for all groups and sources on the incoming interface, or 0xffffffff if no count can be reported. This counter should have the same value as ifInMulticastPkts from the IF-MIB for this interface. | |||||||||||||
| CnqaMtracertHistoryOutputPacketCount | 1.3.6.1.4.1.2011.5.25.111.5.3.1.14 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This field contains the number of multicast packets that have been transmitted or queued for transmission for all groups and sources on the outgoing interface, or 0xffffffff if no count can be reported. This counter should have the same value as ifOutMulti-castPkts from the IF-MIB for this interface. | |||||||||||||
| CnqaMtracertHistoryTotalSGPacketCount | 1.3.6.1.4.1.2011.5.25.111.5.3.1.15 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This field counts the number of packets from the specified source forwarded by this router to the specified group, or 0xffffffff if no count can be reported. This counter should have the same value as ipMRoutePkts from the IPMROUTE-STD-MIB for this forwarding entry. | |||||||||||||
| CnqaMtracertHistoryRtgProtocol | 1.3.6.1.4.1.2011.5.25.111.5.3.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This field describes the routing protocol in use between this router and the previous-hop router.
| |||||||||||||
| CnqaMtracertHistoryFwdTTL | 1.3.6.1.4.1.2011.5.25.111.5.3.1.17 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This field contains the TTL that a packet is required to have before it will be forwarded over the outgoing interface. | |||||||||||||
| CnqaMtracertHistoryFwdCode | 1.3.6.1.4.1.2011.5.25.111.5.3.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This field contains a forwarding information/error code.
noError(1): No error
wrongIf(2): Traceroute request arrived on an interface to
which this router would not forward for this
source,group,destination.
pruneSent(3): This router has sent a prune upstream which
applies to the source and group in the tracer-
oute request.
pruneRCVD(4): This router has stopped forwarding for this
source and group in response to a request from
the next hop router.
scoped(5): The group is subject to administrative scoping
at this hop.
noRoute(6): This router has no route for the source or
group and no way to determine a potential
route.
wrongLastHop(7): This router is not the proper last-hop router.
notForwarding(8):This router is not forwarding this
source,group out the outgoing interface for an
unspecified reason.
reachedRP(9): Reached Rendez-vous Point or Core
rpfIf(10): Traceroute request arrived on the expected RPF
interface for this source,group.
noMulticast(11): Traceroute request arrived on an interface
which is not enabled for multicast.
infoHidden(12): One or more hops have been hidden from this
trace.
noSpace(13): There was not enough room to insert another
response data block in the packet.
oldRouter(14): The previous hop router does not understand
traceroute requests.
adminProhib(15): Traceroute is administratively prohibited.
| |||||||||||||
| CnqaMtracertHistroyFinishState | 1.3.6.1.4.1.2011.5.25.111.5.3.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The finish state of a probe.
| |||||||||||||
| TnqaVplsMacTracertHistoryTable | 1.3.6.1.4.1.2011.5.25.111.5.4 | NA | |||||||||||
table · not-accessible · current Defines the VPLS mac trace Operations test History Table for storing the results of a test operation. | |||||||||||||
| RnqaVplsMacTracertHistoryEntry | 1.3.6.1.4.1.2011.5.25.111.5.4.1 | NA | |||||||||||
row · not-accessible · current Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax. | |||||||||||||
| CnqaVplsMacTracertHistoryIndex | 1.3.6.1.4.1.2011.5.25.111.5.4.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The VPLS mac trace history table index and times for dispatching dependency tests. | |||||||||||||
| CnqaVplsMacTracertHistoryHopIndex | 1.3.6.1.4.1.2011.5.25.111.5.4.1.2 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The index of VPLS mac trace hop. | |||||||||||||
| CnqaVplsMacTracertHistoryResponseIndex | 1.3.6.1.4.1.2011.5.25.111.5.4.1.3 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The index of VPLS mac trace reply packet per hop. | |||||||||||||
| CnqaVplsMacTracertHistoryTimeStamp | 1.3.6.1.4.1.2011.5.25.111.5.4.1.4 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The start time stamp of a probe. | |||||||||||||
| CnqaVplsMacTracertHistoryAddressType | 1.3.6.1.4.1.2011.5.25.111.5.4.1.5 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The address type of history records. | |||||||||||||
| CnqaVplsMacTracertHistoryAddress | 1.3.6.1.4.1.2011.5.25.111.5.4.1.6 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address of tests. For Traceroute, it is the destination address of each hop. | |||||||||||||
| CnqaVplsMacTracertHistoryCompletionTime | 1.3.6.1.4.1.2011.5.25.111.5.4.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The completion time of a probe in milliseconds. The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
| |||||||||||||
| CnqaVplsMacTracertHistoryFinishState | 1.3.6.1.4.1.2011.5.25.111.5.4.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The finish state of a probe.
| |||||||||||||
| CnqaVplsMacTracertHistoryHitFlag | 1.3.6.1.4.1.2011.5.25.111.5.4.1.9 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Hit Flag. | |||||||||||||
| CnqaVplsMacTracertHistoryDSCount | 1.3.6.1.4.1.2011.5.25.111.5.4.1.10 | Integer32 (0..2147483647) | RO | ||||||||||
column · Integer32 (0..2147483647) · read-only · current The count of Downstreams. | |||||||||||||
| CnqaVplsMacTracertHistorySuccessPathNode | 1.3.6.1.4.1.2011.5.25.111.5.4.1.11 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object indicates whether it is a node along the path that passes the Trace test. By default, the value is false, indicating that the object is not a node along the path that passes the Trace test. | |||||||||||||
| TnqaVplsMacTracertHistoryDSTable | 1.3.6.1.4.1.2011.5.25.111.5.5 | NA | |||||||||||
table · not-accessible · current Defines the VPLS mac trace Operations test History Downstreanm Table for storing the results of a test operation. | |||||||||||||
| RnqaVplsMacTracertHistoryDSEntry | 1.3.6.1.4.1.2011.5.25.111.5.5.1 | NA | |||||||||||
row · not-accessible · current Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax. | |||||||||||||
| CnqaVplsMacTracertHistoryDSIndex | 1.3.6.1.4.1.2011.5.25.111.5.5.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The VPLS mac trace history DS table index. | |||||||||||||
| CnqaVplsMacTracertHistoryDSAddress | 1.3.6.1.4.1.2011.5.25.111.5.5.1.2 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current DS address. | |||||||||||||
| TnqaVplsMTraceHistoryTable | 1.3.6.1.4.1.2011.5.25.111.5.6 | NA | |||||||||||
table · not-accessible · current Defines the remote vpls multicast trace operations test history table for storing the results of a test operation. | |||||||||||||
| RnqaVplsMTraceHistoryEntry | 1.3.6.1.4.1.2011.5.25.111.5.6.1 | NA | |||||||||||
row · not-accessible · current Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax. | |||||||||||||
| CnqaVplsMTraceHistoryIndex | 1.3.6.1.4.1.2011.5.25.111.5.6.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The vpls multicast trace history table index and times for dispatching dependency tests. | |||||||||||||
| CnqaVplsMTraceHistoryHopIndex | 1.3.6.1.4.1.2011.5.25.111.5.6.1.2 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The index of vpls multicast trace hop. | |||||||||||||
| CnqaVplsMTraceHistoryResponseIndex | 1.3.6.1.4.1.2011.5.25.111.5.6.1.3 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of vpls multicast trace responser. | |||||||||||||
| CnqaVplsMTraceHistoryResponserAddressType | 1.3.6.1.4.1.2011.5.25.111.5.6.1.4 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The type of history record's Responser address. | |||||||||||||
| CnqaVplsMTraceHistoryResponserAddress | 1.3.6.1.4.1.2011.5.25.111.5.6.1.5 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The Responser address of tests. | |||||||||||||
| CnqaVplsMTraceHistoryUpStreamAddressType | 1.3.6.1.4.1.2011.5.25.111.5.6.1.6 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The type of history records' last hop address. | |||||||||||||
| CnqaVplsMTraceHistoryUpStreamAddress | 1.3.6.1.4.1.2011.5.25.111.5.6.1.7 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The last hop address of tests. | |||||||||||||
| CnqaVplsMTraceHistoryReceivedTtl | 1.3.6.1.4.1.2011.5.25.111.5.6.1.8 | Unsigned32 (1..255) | RO | ||||||||||
column · Unsigned32 (1..255) · read-only · current The value of ttl in the received packet.
| |||||||||||||
| CnqaVplsMTraceHistoryIGMPVersion | 1.3.6.1.4.1.2011.5.25.111.5.6.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The IGMP protocol version.
| |||||||||||||
| CnqaVplsMTraceHistoryIGMPSnpgEnable | 1.3.6.1.4.1.2011.5.25.111.5.6.1.10 | EnableValue | RO | ||||||||||
column · EnableValue · read-only · current The IGMP snooping enable state. | |||||||||||||
| CnqaVplsMTraceHistoryIGMPProxyEnable | 1.3.6.1.4.1.2011.5.25.111.5.6.1.11 | EnableValue | RO | ||||||||||
column · EnableValue · read-only · current The IGMP proxy enable switch. | |||||||||||||
| CnqaVplsMTraceHistoryIGMPRouterPortLearningEnable | 1.3.6.1.4.1.2011.5.25.111.5.6.1.12 | EnableValue | RO | ||||||||||
column · EnableValue · read-only · current The IGMP router port learning enable switch. | |||||||||||||
| CnqaVplsMTraceHistoryRequireRouterAlertEnable | 1.3.6.1.4.1.2011.5.25.111.5.6.1.13 | EnableValue | RO | ||||||||||
column · EnableValue · read-only · current The route alert requirement enable switch. | |||||||||||||
| CnqaVplsMTraceHistoryForwardMode | 1.3.6.1.4.1.2011.5.25.111.5.6.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The forward mode value.
| |||||||||||||
| CnqaVplsMTraceHistoryHitFlag | 1.3.6.1.4.1.2011.5.25.111.5.6.1.15 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Whether the fib is hit on the device which received the packet. | |||||||||||||
| CnqaVplsMTraceHistoryPWExist | 1.3.6.1.4.1.2011.5.25.111.5.6.1.16 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Whether the forward PW is exist. | |||||||||||||
| CnqaVplsMTraceHistoryGroupPolicy | 1.3.6.1.4.1.2011.5.25.111.5.6.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The ACL judge result.
| |||||||||||||
| CnqaVplsMTraceHistoryCACExist | 1.3.6.1.4.1.2011.5.25.111.5.6.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Whether the connection admission control comfiguration of current VSI is exist.
| |||||||||||||
| CnqaVplsMTraceHistoryRcvQueryCount | 1.3.6.1.4.1.2011.5.25.111.5.6.1.19 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The received query packet number for current IGMP version of current VSI. | |||||||||||||
| CnqaVplsMTraceHistoryRcvReportCount | 1.3.6.1.4.1.2011.5.25.111.5.6.1.20 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The received report packet number for current IGMP version of current VSI. | |||||||||||||
| CnqaVplsMTraceHistoryRcvLeaveCount | 1.3.6.1.4.1.2011.5.25.111.5.6.1.21 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The received leave packet number for current IGMP version of current VSI. | |||||||||||||
| CnqaVplsMTraceHistoryTimeStamp | 1.3.6.1.4.1.2011.5.25.111.5.6.1.22 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The start time stamp of a probe. | |||||||||||||
| CnqaVplsMTraceHistoryCompletionTime | 1.3.6.1.4.1.2011.5.25.111.5.6.1.23 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
| |||||||||||||
| CnqaVplsMTraceHistoryLastRC | 1.3.6.1.4.1.2011.5.25.111.5.6.1.24 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The last implementation method specific reply code received. | |||||||||||||
| CnqaVplsMTraceHistoryLastRSC | 1.3.6.1.4.1.2011.5.25.111.5.6.1.25 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The last implementation method specific reply sub code received. | |||||||||||||
| CnqaVplsMTraceHistoryFinishState | 1.3.6.1.4.1.2011.5.25.111.5.6.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The finish state of a probe.
| |||||||||||||
| CnqaVplsMTraceHistorySuccessPathNode | 1.3.6.1.4.1.2011.5.25.111.5.6.1.27 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Whether the response router is on the path of a probe. The default value is notonPath(2).
| |||||||||||||
| TnqaMacTraceHistoryTable | 1.3.6.1.4.1.2011.5.25.111.5.7 | NA | |||||||||||
table · not-accessible · current This object defines a list of historical MAC trace test instances for storing the running results of test instances. | |||||||||||||
| RnqaMacTraceHistoryEntry | 1.3.6.1.4.1.2011.5.25.111.5.7.1 | NA | |||||||||||
row · not-accessible · current This object defines a table for storing the running results of test instances. The number of entries in this table is limited by the value of nqaAdminParaHistoryRowMax. | |||||||||||||
| CnqaMacTraceHistoryIndex | 1.3.6.1.4.1.2011.5.25.111.5.7.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The object indicates the index of the MAC tract history table and the number of times for dispatching dependency tests. | |||||||||||||
| CnqaMacTraceHistoryReceiveOrder | 1.3.6.1.4.1.2011.5.25.111.5.7.1.2 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current This object indicates the sequence in which LTRs are received. | |||||||||||||
| CnqaMacTraceHistoryTTL | 1.3.6.1.4.1.2011.5.25.111.5.7.1.3 | Integer32 (1..255) | RO | ||||||||||
column · Integer32 (1..255) · read-only · current This object indicates the TTL of the LTR. | |||||||||||||
| CnqaMacTraceHistorySeqNumber | 1.3.6.1.4.1.2011.5.25.111.5.7.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the sequence number of the LTR. | |||||||||||||
| CnqaMacTraceHistoryCompletionTime | 1.3.6.1.4.1.2011.5.25.111.5.7.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the RTT (ms) of the response packet.
| |||||||||||||
| CnqaMacTraceHistoryForwarded | 1.3.6.1.4.1.2011.5.25.111.5.7.1.6 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object indicates whether the device that sends LTRs continues to forward LTMs. | |||||||||||||
| CnqaMacTraceHistoryTerminalMep | 1.3.6.1.4.1.2011.5.25.111.5.7.1.7 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object indicates whether the LTR is sent by an MEP. | |||||||||||||
| CnqaMacTraceHistoryRelayAction | 1.3.6.1.4.1.2011.5.25.111.5.7.1.8 | HWDot1agCfmRelayActionFieldValue | RO | ||||||||||
column · HWDot1agCfmRelayActionFieldValue · read-only · current This object indicates the value of the Relay Action field in the LTR. | |||||||||||||
| CnqaMacTraceHistoryIngressAction | 1.3.6.1.4.1.2011.5.25.111.5.7.1.9 | HWDot1agCfmIngressActionFieldValue | RO | ||||||||||
column · HWDot1agCfmIngressActionFieldValue · read-only · current This object indicates the value of the Ingress Action field in the LTR. | |||||||||||||
| CnqaMacTraceHistoryIngressMac | 1.3.6.1.4.1.2011.5.25.111.5.7.1.10 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current This object indicates the physical MAC address carried in the ingress MAC address field in the LTR. | |||||||||||||
| CnqaMacTraceHistoryIngressIfName | 1.3.6.1.4.1.2011.5.25.111.5.7.1.11 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the name of the inbound interface of the LTR. | |||||||||||||
| CnqaMacTraceHistoryEgressAction | 1.3.6.1.4.1.2011.5.25.111.5.7.1.12 | HWDot1agCfmEgressActionFieldValue | RO | ||||||||||
column · HWDot1agCfmEgressActionFieldValue · read-only · current This object indicates the value of the Egress Action field in the LTR. | |||||||||||||
| CnqaMacTraceHistoryEgressMac | 1.3.6.1.4.1.2011.5.25.111.5.7.1.13 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current This object indicates the MAC address in the Egress MAC address field of the LTR. | |||||||||||||
| CnqaMacTraceHistoryEgressIfName | 1.3.6.1.4.1.2011.5.25.111.5.7.1.14 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the name of the interface that forwards the LTR. | |||||||||||||
| TnqaMultiPathHistoryTable | 1.3.6.1.4.1.2011.5.25.111.5.8 | NA | |||||||||||
table · not-accessible · current Defines the Remote Operations test History Table for storing the results of a test operation. | |||||||||||||
| RnqaMultiPathHistoryEntry | 1.3.6.1.4.1.2011.5.25.111.5.8.1 | NA | |||||||||||
row · not-accessible · current Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax. | |||||||||||||
| CnqaMultiPathHistoryIndex | 1.3.6.1.4.1.2011.5.25.111.5.8.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The history table index and times for dispatching dependency tests. | |||||||||||||
| CnqaMultiPathHistoryPathIndex | 1.3.6.1.4.1.2011.5.25.111.5.8.1.2 | Integer32 (1..128) | NA | ||||||||||
column · Integer32 (1..128) · not-accessible · current The path index. | |||||||||||||
| CnqaMultiPathHistoryHopIndex | 1.3.6.1.4.1.2011.5.25.111.5.8.1.3 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1. | |||||||||||||
| CnqaMultiPathHistoryProbeIndex | 1.3.6.1.4.1.2011.5.25.111.5.8.1.4 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The probe index of tests. | |||||||||||||
| CnqaMultiPathHistoryTimeStamp | 1.3.6.1.4.1.2011.5.25.111.5.8.1.5 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The start time stamp of a probe. | |||||||||||||
| CnqaMultiPathHistoryAddressType | 1.3.6.1.4.1.2011.5.25.111.5.8.1.6 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The address type of history records. | |||||||||||||
| CnqaMultiPathHistoryAddress | 1.3.6.1.4.1.2011.5.25.111.5.8.1.7 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The destination address of tests. For Traceroute, it is the destination address of each hop. | |||||||||||||
| CnqaMultiPathHistoryCompletionTime | 1.3.6.1.4.1.2011.5.25.111.5.8.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The amount of time from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe. | |||||||||||||
| CnqaMultiPathHistoryFinishState | 1.3.6.1.4.1.2011.5.25.111.5.8.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of a test operation made by a remote host for a particular probe.
| |||||||||||||
| CnqaMultiPathHistoryLastRC | 1.3.6.1.4.1.2011.5.25.111.5.8.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The last implementation method specific reply code received. | |||||||||||||
| NnqaNotifications | 1.3.6.1.4.1.2011.5.25.111.6 | ||||||||||||
| !nqaResultsProbeFailed | 1.3.6.1.4.1.2011.5.25.111.6.1 | ||||||||||||
notification · current Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated. (except for HTTP or Jitter or FTP)
| |||||||||||||
| !nqaResultsTestFailed | 1.3.6.1.4.1.2011.5.25.111.6.2 | ||||||||||||
notification · current Generated when a nqa test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed. (Except for HTTP or Jitter or FTP)
| |||||||||||||
| !nqaResultsTestCompleted | 1.3.6.1.4.1.2011.5.25.111.6.3 | ||||||||||||
notification · current Generated at the completion of a nqa test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2).(except for HTTP or Jitter or FTP)
| |||||||||||||
| !nqaResultsThresholdNotification | 1.3.6.1.4.1.2011.5.25.111.6.4 | ||||||||||||
notification · current If the time of executing tests exceeds the nqaAdminCtrlThreshold1, the system sends trap information.(except for HTTP or Jitter or FTP) | |||||||||||||
| !nqaHTTPStatsProbeFailed | 1.3.6.1.4.1.2011.5.25.111.6.5 | ||||||||||||
notification · current Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for HTTP)
| |||||||||||||
| !nqaHTTPStatsTestFailed | 1.3.6.1.4.1.2011.5.25.111.6.6 | ||||||||||||
notification · current Generated when a HTTP test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for HTTP)
| |||||||||||||
| !nqaHTTPStatsTestCompleted | 1.3.6.1.4.1.2011.5.25.111.6.7 | ||||||||||||
notification · current Generated at the completion of a HTTP test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2).
| |||||||||||||
| !nqaHTTPStatsThresholdNotification | 1.3.6.1.4.1.2011.5.25.111.6.8 | ||||||||||||
notification · current If the time of executing tests exceeds the nqaAdminCtrlThreshold1 or nqaAdminCtrlThreshold2 or nqaAdminCtrlThreshold3, the system sends trap information.(Only for HTTP) | |||||||||||||
| !nqaJitterStatsProbeFailed | 1.3.6.1.4.1.2011.5.25.111.6.9 | ||||||||||||
notification · current Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for Jitter)
| |||||||||||||
| !nqaJitterStatsTestFailed | 1.3.6.1.4.1.2011.5.25.111.6.10 | ||||||||||||
notification · current Generated when a Jitter test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for Jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping)
| |||||||||||||
| !nqaJitterStatsTestCompleted | 1.3.6.1.4.1.2011.5.25.111.6.11 | ||||||||||||
notification · current Generated at the completion of a Jitter test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for Jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping)
| |||||||||||||
| !nqaFTPStatsProbeFailed | 1.3.6.1.4.1.2011.5.25.111.6.12 | ||||||||||||
notification · current Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for FTP) | |||||||||||||
| !nqaFTPStatsTestFailed | 1.3.6.1.4.1.2011.5.25.111.6.13 | ||||||||||||
notification · current Generated when a FTP test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for FTP) | |||||||||||||
| !nqaFTPStatsTestCompleted | 1.3.6.1.4.1.2011.5.25.111.6.14 | ||||||||||||
notification · current Generated at the completion of a FTP test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for FTP) | |||||||||||||
| !nqaFTPStatsThresholdNotification | 1.3.6.1.4.1.2011.5.25.111.6.15 | ||||||||||||
notification · current If the time of executing tests exceeds the nqaAdminCtrlThreshold1 or nqaAdminCtrlThreshold2, the system sends trap information.(Only for FTP) | |||||||||||||
| !nqaJitterStatsRTDThresholdNotification | 1.3.6.1.4.1.2011.5.25.111.6.16 | ||||||||||||
notification · current If the time of executing tests exceeds the nqaAdminCtrlThreshold1, the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping) | |||||||||||||
| !nqaJitterStatsOWDThresholdNotificationSD | 1.3.6.1.4.1.2011.5.25.111.6.17 | ||||||||||||
notification · current If the time of executing tests exceeds the nqaAdminCtrlThreshold2 the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing) | |||||||||||||
| !nqaJitterStatsOWDThresholdNotificationDS | 1.3.6.1.4.1.2011.5.25.111.6.18 | ||||||||||||
notification · current If the time of executing tests exceeds the nqaAdminCtrlThreshold3 the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing) | |||||||||||||
| !nqaNegotiateFailed | 1.3.6.1.4.1.2011.5.25.111.6.19 | ||||||||||||
notification · current If negotiation between client and server failed,the system sends trap information. | |||||||||||||
| !nqaRisingAlarmNotification | 1.3.6.1.4.1.2011.5.25.111.6.20 | ||||||||||||
notification · current Sending trap messages when the value of the monitored object exceeds nqaAlarmUpperThreshold. | |||||||||||||
| !nqaFallingAlarmNotification | 1.3.6.1.4.1.2011.5.25.111.6.21 | ||||||||||||
notification · current Sending trap messages when the value of the monitored object is under nqaAlarmLowerThreshold. | |||||||||||||
| !nqaFtpSaveRecordNotification | 1.3.6.1.4.1.2011.5.25.111.6.22 | ||||||||||||
notification · current Sending trap messages when saving a test result to the FTP server is completed.
| |||||||||||||
| !nqaPppoeStatsTestFailed | 1.3.6.1.4.1.2011.5.25.111.6.23 | ||||||||||||
notification · current Generated when a PPPoE test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). (Only for PPPoE)) | |||||||||||||
| !nqaPppoeStatsTestCompleted | 1.3.6.1.4.1.2011.5.25.111.6.24 | ||||||||||||
notification · current Generated at the completion of a PPPoE test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for PPPoE) | |||||||||||||
| !nqaJitterStatsJitterThresholdNotificationSD | 1.3.6.1.4.1.2011.5.25.111.6.25 | ||||||||||||
notification · current If the time of executing tests exceeds the nqaAdminCtrlJitterThresholdSD the system sends trap information. (Only for jitter) | |||||||||||||
| !nqaJitterStatsJitterThresholdNotificationDS | 1.3.6.1.4.1.2011.5.25.111.6.26 | ||||||||||||
notification · current If the time of executing tests exceeds the nqaAdminCtrlJitterThresholdDS the system sends trap information. (Only for jitter) | |||||||||||||
| !nqaReflectorStateChangeNotification | 1.3.6.1.4.1.2011.5.25.111.6.27 | ||||||||||||
notification · current If the status of the reflector changes, the system sends trap information (only for the reflector).
| |||||||||||||
| !nqaResultsTestResultChange | 1.3.6.1.4.1.2011.5.25.111.6.28 | ||||||||||||
notification · current If the test result changes, the system sends trap information. | |||||||||||||
| !nqaResultsTestResultChangePackedNotification | 1.3.6.1.4.1.2011.5.25.111.6.29 | ||||||||||||
notification · current If the test result changes, the system sends packed trap information. No more than two traps will be sent in one second and each trap contains at most ten records.
| |||||||||||||
| !nqaResultsTestResultStatusChange | 1.3.6.1.4.1.2011.5.25.111.6.30 | ||||||||||||
notification · current If the test result changes, the system sends trap information.
| |||||||||||||
| NnqaConformance | 1.3.6.1.4.1.2011.5.25.111.7 | ||||||||||||
| NnqaGroups | 1.3.6.1.4.1.2011.5.25.111.7.1 | ||||||||||||
| GnqaBaseGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.1 | ||||||||||||
group · current Description. | |||||||||||||
| GnqaAdminGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.2 | ||||||||||||
group · current Description.
| |||||||||||||
| GnqaServerGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.3 | ||||||||||||
group · current Description. | |||||||||||||
| GnqaStatsGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.4 | ||||||||||||
group · current Description.
| |||||||||||||
| GnqaHistoryGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.5 | ||||||||||||
group · current Description.
| |||||||||||||
| GnqaNotificationsGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.6 | ||||||||||||
group · current The notification which are required to be supported by implementations of this MIB.
| |||||||||||||
| GnqaCollectStatsGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.7 | ||||||||||||
group · current Description.
| |||||||||||||
| GnqaAlarmGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.8 | ||||||||||||
group · current Description.
| |||||||||||||
| GnqaFtpSaveRecordGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.9 | ||||||||||||
| GnqaReflectorGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.10 | ||||||||||||
group · current Description.
| |||||||||||||
| GnqaTestFlowGroup | 1.3.6.1.4.1.2011.5.25.111.7.1.11 | ||||||||||||
group · current Description.
| |||||||||||||
| NnqaCompliances | 1.3.6.1.4.1.2011.5.25.111.7.2 | ||||||||||||
| MnqaCompliance | 1.3.6.1.4.1.2011.5.25.111.7.2.1 | ||||||||||||
compliance · current Description. | |||||||||||||
| NnqaCollectStats | 1.3.6.1.4.1.2011.5.25.111.8 | ||||||||||||
| TnqaJitterCollectStatsTable | 1.3.6.1.4.1.2011.5.25.111.8.1 | NA | |||||||||||
table · not-accessible · current A table which contains the rolling accumulated history of the Jitter operation. | |||||||||||||
| RnqaJitterCollectStatsEntry | 1.3.6.1.4.1.2011.5.25.111.8.1.1 | NA | |||||||||||
row · not-accessible · current A table which contains the rolling accumulated history of the Jitter operation. This entry is created only if the nqaAdminCtrlType is jitterAppl. | |||||||||||||
| CnqaJitterCollectStatsIndex | 1.3.6.1.4.1.2011.5.25.111.8.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The third index of jitter collection statistics table. | |||||||||||||
| CnqaJitterCollectStatsCompletions | 1.3.6.1.4.1.2011.5.25.111.8.1.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of the tests that have completed successfully. | |||||||||||||
| CnqaJitterCollectStatsRTDOverThresholds | 1.3.6.1.4.1.2011.5.25.111.8.1.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate RTD (Round Trip Delay) threshold. | |||||||||||||
| CnqaJitterCollectStatsOWDOverThresholdsSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate OWD (One Way Delay) threshold from source to destination. | |||||||||||||
| CnqaJitterCollectStatsOWDOverThresholdsDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of tests that violate OWD (One Way Delay) threshold from destination to source. | |||||||||||||
| CnqaJitterCollectStatsNumOfRTT | 1.3.6.1.4.1.2011.5.25.111.8.1.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of RTTs that are successfully measured by tests. | |||||||||||||
| CnqaJitterCollectStatsRTTSum | 1.3.6.1.4.1.2011.5.25.111.8.1.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of RTTs that are successfully measured. | |||||||||||||
| CnqaJitterCollectStatsRTTSum2Low | 1.3.6.1.4.1.2011.5.25.111.8.1.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of RTTs that are successfully measured by tests (low order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsRTTSum2High | 1.3.6.1.4.1.2011.5.25.111.8.1.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of RTTs that are successfully measured by tests (high order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsRTTMin | 1.3.6.1.4.1.2011.5.25.111.8.1.1.10 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterCollectStatsRTTMax | 1.3.6.1.4.1.2011.5.25.111.8.1.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterCollectStatsMinOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.12 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute value of all positive jitter values from source to destination. | |||||||||||||
| CnqaJitterCollectStatsMaxOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.13 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute value of all positive jitter values from source to destination. | |||||||||||||
| CnqaJitterCollectStatsNumOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all positive jitter values from source to destination. | |||||||||||||
| CnqaJitterCollectStatsSumOfPositivesSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of absolute value of all positive jitter values from source to destination. | |||||||||||||
| CnqaJitterCollectStatsSum2OfPositivesSDLow | 1.3.6.1.4.1.2011.5.25.111.8.1.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsSum2OfPositivesSDHigh | 1.3.6.1.4.1.2011.5.25.111.8.1.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsMinOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.18 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute value of all negative jitter values from source to destination. | |||||||||||||
| CnqaJitterCollectStatsMaxOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.19 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute value of all negative jitter values from source to destination. | |||||||||||||
| CnqaJitterCollectStatsNumOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all negative jitter values from source to destination. | |||||||||||||
| CnqaJitterCollectStatsSumOfNegativesSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of absolute value of all negative jitter values from source to destination. | |||||||||||||
| CnqaJitterCollectStatsSum2OfNegativesSDLow | 1.3.6.1.4.1.2011.5.25.111.8.1.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all negative values from source to destination (low order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsSum2OfNegativesSDHigh | 1.3.6.1.4.1.2011.5.25.111.8.1.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all negative values from source to destination (high order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsMinOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.24 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute value of all positive jitter values from destination to source. | |||||||||||||
| CnqaJitterCollectStatsMaxOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.25 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute value of all positive jitter values from destination to source. | |||||||||||||
| CnqaJitterCollectStatsNumOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.26 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all positive jitter values from destination to source. | |||||||||||||
| CnqaJitterCollectStatsSumOfPositivesDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.27 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of absolute value of all positive jitter values from destination to source. | |||||||||||||
| CnqaJitterCollectStatsSum2OfPositivesDSLow | 1.3.6.1.4.1.2011.5.25.111.8.1.1.28 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsSum2OfPositivesDSHigh | 1.3.6.1.4.1.2011.5.25.111.8.1.1.29 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsMinOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.30 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute value of all negative jitter values from destination to source. | |||||||||||||
| CnqaJitterCollectStatsMaxOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.31 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute value of all negative jitter values from destination to source. | |||||||||||||
| CnqaJitterCollectStatsNumOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.32 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all negative jitter values from destination to source. | |||||||||||||
| CnqaJitterCollectStatsSumOfNegativesDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.33 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of absolute value of all negative jitter values from destination to source. | |||||||||||||
| CnqaJitterCollectStatsSum2OfNegativesDSLow | 1.3.6.1.4.1.2011.5.25.111.8.1.1.34 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all negative values from destination to source (low order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsSum2OfNegativesDSHigh | 1.3.6.1.4.1.2011.5.25.111.8.1.1.35 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of absolute value of all negative values from destination to source (high order 32 bits). | |||||||||||||
| CnqaJitterCollectStatsMaxDelaySD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.36 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all OWD (One Way Delay) from source to destination.
| |||||||||||||
| CnqaJitterCollectStatsMaxDelayDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.37 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all OWD (One Way Delay) from destination to source.
| |||||||||||||
| CnqaJitterCollectStatsNumOfOWD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.38 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of OWDs that were successfully measured by tests. | |||||||||||||
| CnqaJitterCollectStatsOWSumSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.39 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of OWDs that were successfully measured by tests from source to destination. | |||||||||||||
| CnqaJitterCollectStatsOWSumDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.40 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of OWDs that were successfully measured by tests from destination to source. | |||||||||||||
| CnqaJitterCollectStatsPacketLossSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.41 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets lost when sent from source to destination. | |||||||||||||
| CnqaJitterCollectStatsPacketLossDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.42 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets lost when sent from destination to source. | |||||||||||||
| CnqaJitterCollectStatsPacketLossUnknown | 1.3.6.1.4.1.2011.5.25.111.8.1.1.43 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets lost for which we cannot determine the direction. | |||||||||||||
| CnqaJitterCollectStatsPacketOutOfSequences | 1.3.6.1.4.1.2011.5.25.111.8.1.1.44 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets arrived out of sequence. | |||||||||||||
| CnqaJitterCollectStatsPacketLossRatio | 1.3.6.1.4.1.2011.5.25.111.8.1.1.45 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of the packets lost to all packets sent in the test. | |||||||||||||
| CnqaJitterCollectStatsErrors | 1.3.6.1.4.1.2011.5.25.111.8.1.1.46 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of errors occurred in the test. | |||||||||||||
| CnqaJitterCollectStatsBusies | 1.3.6.1.4.1.2011.5.25.111.8.1.1.47 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a test couldn't be initialized because the previous test has not completed. | |||||||||||||
| CnqaJitterCollectStatsTimeouts | 1.3.6.1.4.1.2011.5.25.111.8.1.1.48 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of responses arrived over the time. | |||||||||||||
| CnqaJitterCollectStatsProbeResponses | 1.3.6.1.4.1.2011.5.25.111.8.1.1.49 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of responses from echo-server for the packets sent by the test. | |||||||||||||
| CnqaJitterCollectStatsSentProbes | 1.3.6.1.4.1.2011.5.25.111.8.1.1.50 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets sent in the test. | |||||||||||||
| CnqaJitterCollectStatsDrops | 1.3.6.1.4.1.2011.5.25.111.8.1.1.51 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets that were sent failed in the test. | |||||||||||||
| CnqaJitterCollectStatsRTTAvg | 1.3.6.1.4.1.2011.5.25.111.8.1.1.52 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of RTTs that were successfully measured by tests. | |||||||||||||
| CnqaJitterCollectStatsAvgJitter | 1.3.6.1.4.1.2011.5.25.111.8.1.1.53 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of jitter values that were successfully measured by tests. | |||||||||||||
| CnqaJitterCollectStatsAvgJitterSD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.54 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of jitter values from source to destination that were successfully measured by tests. | |||||||||||||
| CnqaJitterCollectStatsAvgJitterDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.55 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of jitter values from destination to source that were successfully measured by tests. | |||||||||||||
| CnqaJitterCollectStatsJitterOut | 1.3.6.1.4.1.2011.5.25.111.8.1.1.56 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Jitter (RFC1889) at responder. | |||||||||||||
| CnqaJitterCollectStatsJitterIn | 1.3.6.1.4.1.2011.5.25.111.8.1.1.57 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Jitter (RFC1889) at sender. | |||||||||||||
| CnqaJitterCollectStatsMinDelaySD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.58 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all OWD (One Way Delay) from source to destination.
| |||||||||||||
| CnqaJitterCollectStatsMinDelayDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.59 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all OWD (One Way Delay) from destination to source.
| |||||||||||||
| CnqaJitterCollectStatsAvgDelaySD | 1.3.6.1.4.1.2011.5.25.111.8.1.1.60 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of all OWD (One Way Delay) from source to destination.
| |||||||||||||
| CnqaJitterCollectStatsAvgDelayDS | 1.3.6.1.4.1.2011.5.25.111.8.1.1.61 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of all OWD (One Way Delay) from destination to source.
| |||||||||||||
| CnqaJitterCollectStatsPktRewriteNum | 1.3.6.1.4.1.2011.5.25.111.8.1.1.62 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all the packets have been rewrited. | |||||||||||||
| CnqaJitterCollectStatsPktRewriteRatio | 1.3.6.1.4.1.2011.5.25.111.8.1.1.63 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of all the packets have been rewrited. | |||||||||||||
| CnqaJitterCollectStatsPktDisorderNum | 1.3.6.1.4.1.2011.5.25.111.8.1.1.64 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all the packets have been disordered. | |||||||||||||
| CnqaJitterCollectStatsPktDisorderRatio | 1.3.6.1.4.1.2011.5.25.111.8.1.1.65 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of all the packets have been disordered. | |||||||||||||
| CnqaJitterCollectStatsFragPktDisorderNum | 1.3.6.1.4.1.2011.5.25.111.8.1.1.66 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all the packets whose fragments have been disordered. | |||||||||||||
| CnqaJitterCollectStatsFragPktDisorderRatio | 1.3.6.1.4.1.2011.5.25.111.8.1.1.67 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The ratio of all the packets whose fragments have been disordered. | |||||||||||||
| NnqaAlarm | 1.3.6.1.4.1.2011.5.25.111.9 | ||||||||||||
| SnqaMaxAlarmNum | 1.3.6.1.4.1.2011.5.25.111.9.1 | Integer32 (1..2147483647) | RO | ||||||||||
scalar · Integer32 (1..2147483647) · read-only · current Maximum number of alarms. | |||||||||||||
| SnqaMaxEventNum | 1.3.6.1.4.1.2011.5.25.111.9.2 | Integer32 (1..2147483647) | RO | ||||||||||
scalar · Integer32 (1..2147483647) · read-only · current Maximum number of events that alarms can trigger. | |||||||||||||
| TnqaAlarmTable | 1.3.6.1.4.1.2011.5.25.111.9.3 | NA | |||||||||||
table · not-accessible · current A list of alarm entries. | |||||||||||||
| RnqaAlarmEntry | 1.3.6.1.4.1.2011.5.25.111.9.3.1 | NA | |||||||||||
row · not-accessible · current A list of parameters that set up a periodic checking for alarm conditions. | |||||||||||||
| CnqaAlarmIndex | 1.3.6.1.4.1.2011.5.25.111.9.3.1.1 | Integer32 (1..65535) | NA | ||||||||||
column · Integer32 (1..65535) · not-accessible · current Uniquely identifies a row in the nqaAlarmTable. | |||||||||||||
| CnqaAlarmVariable | 1.3.6.1.4.1.2011.5.25.111.9.3.1.11 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The type of the particular variable to be sampled.
| |||||||||||||
| CnqaAlarmSampleType | 1.3.6.1.4.1.2011.5.25.111.9.3.1.12 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current delta(1): relative value absolute(2): absolute value Relative value: indicates the relative value to the last sampling. Currently, only absolute(2) is supported.
| |||||||||||||
| CnqaAlarmValue | 1.3.6.1.4.1.2011.5.25.111.9.3.1.13 | Integer32 (0..2147483647) | RO | ||||||||||
column · Integer32 (0..2147483647) · read-only · current The actual value of the monitored object is compared with the upper limit and lower limit. | |||||||||||||
| CnqaAlarmStartUpNqaAlarm | 1.3.6.1.4.1.2011.5.25.111.9.3.1.14 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated.
| |||||||||||||
| CnqaAlarmRisingThreshold | 1.3.6.1.4.1.2011.5.25.111.9.3.1.15 | Integer32 (0..2147483647) | RC | ||||||||||
column · Integer32 (0..2147483647) · read-create · current Set the upper limit of the alarm. | |||||||||||||
| CnqaAlarmFallingThreshold | 1.3.6.1.4.1.2011.5.25.111.9.3.1.16 | Integer32 (0..2147483647) | RC | ||||||||||
column · Integer32 (0..2147483647) · read-create · current Set the lower limit of the alarm. | |||||||||||||
| CnqaAlarmRisingEventIndex | 1.3.6.1.4.1.2011.5.25.111.9.3.1.17 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current Index of the event triggered when the node value exceeds the upper limit. | |||||||||||||
| CnqaAlarmFallingEventIndex | 1.3.6.1.4.1.2011.5.25.111.9.3.1.18 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current Index of the event triggered when the node value is under the lower limit. | |||||||||||||
| CnqaAlarmDescription | 1.3.6.1.4.1.2011.5.25.111.9.3.1.19 | OCTET STRING (SIZE (0..127)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..127)) · read-create · current Alarm Description. | |||||||||||||
| CnqaAlarmStatus | 1.3.6.1.4.1.2011.5.25.111.9.3.1.51 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of the alarm row. | |||||||||||||
| TnqaEventTable | 1.3.6.1.4.1.2011.5.25.111.9.4 | NA | |||||||||||
table · not-accessible · current A list of events to be generated. | |||||||||||||
| RnqaEventEntry | 1.3.6.1.4.1.2011.5.25.111.9.4.1 | NA | |||||||||||
row · not-accessible · current A set of parameters that describe an event to be generated when certain conditions are met.
| |||||||||||||
| CnqaEventIndex | 1.3.6.1.4.1.2011.5.25.111.9.4.1.1 | Integer32 (1..65535) | NA | ||||||||||
column · Integer32 (1..65535) · not-accessible · current Uniquely identifies a row in the nqaEventTable. | |||||||||||||
| CnqaEventType | 1.3.6.1.4.1.2011.5.25.111.9.4.1.11 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Event type, that is, behaviors for processing events: none(1): no behavior log(2): keeping logs trap(3): sending trap messages logandtrap(4): keeping logs and sending trap messages linkage(5): start the linkaged test-instance.
| |||||||||||||
| CnqaEventDescription | 1.3.6.1.4.1.2011.5.25.111.9.4.1.12 | OCTET STRING (SIZE (0..127)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..127)) · read-create · current Event description. | |||||||||||||
| CnqaEventAdminName | 1.3.6.1.4.1.2011.5.25.111.9.4.1.13 | OCTET STRING (SIZE (0..32)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-create · current Administrator name of event test instance. | |||||||||||||
| CnqaEventOperationTag | 1.3.6.1.4.1.2011.5.25.111.9.4.1.14 | OCTET STRING (SIZE (0..32)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-create · current Operation tag of event test instance. | |||||||||||||
| CnqaEventStatus | 1.3.6.1.4.1.2011.5.25.111.9.4.1.51 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of the event row. | |||||||||||||
| NnqaSaveRecord | 1.3.6.1.4.1.2011.5.25.111.10 | ||||||||||||
| SnqaFtpSaveRecordEnable | 1.3.6.1.4.1.2011.5.25.111.10.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Identifies whether saving test results to the FTP server through FTP is enabled. enable(1) disable(2) By default, the value is disable(2). | |||||||||||||
| SnqaFtpSaveRecordIpAddr | 1.3.6.1.4.1.2011.5.25.111.10.2 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Set the IP address of the FTP server to which test results are saved. | |||||||||||||
| SnqaFtpSaveRecordVrfName | 1.3.6.1.4.1.2011.5.25.111.10.3 | OCTET STRING (SIZE (0..31)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..31)) · read-write · current Set the name of the VRF instance for the FTP server to which test results are saved. | |||||||||||||
| SnqaFtpSaveRecordUserName | 1.3.6.1.4.1.2011.5.25.111.10.4 | OCTET STRING (SIZE (0..255)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..255)) · read-write · current Set the user name of the FTP server to which test results are saved. | |||||||||||||
| SnqaFtpSaveRecordPassword | 1.3.6.1.4.1.2011.5.25.111.10.5 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..32)) · read-write · current Set the password used when the test results are saved to the FTP server. | |||||||||||||
| SnqaFtpSaveRecordFileName | 1.3.6.1.4.1.2011.5.25.111.10.6 | OCTET STRING (SIZE (0..200)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..200)) · read-write · current Set the file name of used by the FTP server to save test results. | |||||||||||||
| SnqaFtpSaveRecordItemNum | 1.3.6.1.4.1.2011.5.25.111.10.7 | Integer32 (10000..2147483647) | RW | ||||||||||
scalar · Integer32 (10000..2147483647) · read-write · current The value of this object identifies the number of NQA test results that can be saved in a file created on the FTP server. The default value is 100000. | |||||||||||||
| SnqaFtpSaveRecordTime | 1.3.6.1.4.1.2011.5.25.111.10.8 | Integer32 (1..43200) | RW | ||||||||||
scalar · Integer32 (1..43200) · read-write · current The value of this object identifies the duration that NQA test results can be saved in a file created on the FTP server. The default duration is 60 minutes.
| |||||||||||||
| SnqaFtpSaveRecordNotificationEnable | 1.3.6.1.4.1.2011.5.25.111.10.9 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set whether to send trap messages when saving test results to the FTP server is completed. By default, the value is disable(2). | |||||||||||||
| SnqaFtpSaveRecordLastFileName | 1.3.6.1.4.1.2011.5.25.111.10.10 | OCTET STRING (SIZE (0..220)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..220)) · read-only · current Set the name of the file used to save the last test record to the FTP server. | |||||||||||||
| NnqaReflector | 1.3.6.1.4.1.2011.5.25.111.11 | ||||||||||||
| TnqaReflectorTable | 1.3.6.1.4.1.2011.5.25.111.11.1 | NA | |||||||||||
table · not-accessible · current Description: nqaReflectorTable describes how to configure an NQA reflector. Creation restrictions: None Modification restrictions: This table is generated after a reflector is created. The entries in this table can be modified when nqaReflectorID is specified. The reflector cannot be modified after being created. Deletion restrictions: None Access restrictions: None | |||||||||||||
| RnqaReflectorEntry | 1.3.6.1.4.1.2011.5.25.111.11.1.1 | NA | |||||||||||
| CnqaReflectorID | 1.3.6.1.4.1.2011.5.25.111.11.1.1.1 | Integer32 | AN | ||||||||||
column · Integer32 · accessible-for-notify · current This object indicates the reflector ID, which is also the index of this table. | |||||||||||||
| CnqaReflectorIfIndex | 1.3.6.1.4.1.2011.5.25.111.11.1.1.2 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This object indicates the index of the reflector interface. | |||||||||||||
| CnqaReflectorMacAddress | 1.3.6.1.4.1.2011.5.25.111.11.1.1.3 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current This object indicates the MAC address. | |||||||||||||
| CnqaReflectorIPAddressType | 1.3.6.1.4.1.2011.5.25.111.11.1.1.4 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current This object indicates the type of an IP address. | |||||||||||||
| CnqaReflectorIPAddress | 1.3.6.1.4.1.2011.5.25.111.11.1.1.5 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current This object indicates the IP address. | |||||||||||||
| CnqaReflectorSimulationIPAddressType | 1.3.6.1.4.1.2011.5.25.111.11.1.1.6 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current This object indicates the type of an simulated IP address. | |||||||||||||
| CnqaReflectorSimulationIPAddress | 1.3.6.1.4.1.2011.5.25.111.11.1.1.7 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current This object indicates the simulated IP address. | |||||||||||||
| CnqaReflectorPevid | 1.3.6.1.4.1.2011.5.25.111.11.1.1.8 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This object indicates the PE VLAN ID. | |||||||||||||
| CnqaReflectorCevid | 1.3.6.1.4.1.2011.5.25.111.11.1.1.9 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This object indicates the CE VLAN ID. | |||||||||||||
| CnqaReflectorAgeTime | 1.3.6.1.4.1.2011.5.25.111.11.1.1.10 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This object indicates the aging time, in seconds. Setting the value to 0 indicates reserving the reflector eternally.
| |||||||||||||
| CnqaReflectorSourcePort | 1.3.6.1.4.1.2011.5.25.111.11.1.1.11 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current This object indicates the UDP source port number. 0 means invalid UDP source port, it cannot be set but could be walked | |||||||||||||
| CnqaReflectorDestinationPort | 1.3.6.1.4.1.2011.5.25.111.11.1.1.12 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current This object indicates the UDP destination port number. 0 means invalid UDP source port, it cannot be set but could be walked | |||||||||||||
| CnqaReflectorState | 1.3.6.1.4.1.2011.5.25.111.11.1.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the status of the reflector. 1: active 2: not in service
| |||||||||||||
| CnqaReflectorSurvivalTime | 1.3.6.1.4.1.2011.5.25.111.11.1.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the survival time of the reflector, in seconds. | |||||||||||||
| CnqaReflectorRecommendedTestMacAddress | 1.3.6.1.4.1.2011.5.25.111.11.1.1.15 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current This object indicates the recommended test MAC address. | |||||||||||||
| CnqaReflectorTestBehavior | 1.3.6.1.4.1.2011.5.25.111.11.1.1.16 | Unsigned32 (0..3) | RC | ||||||||||
column · Unsigned32 (0..3) · read-create · current This object indicates the action performed on the non-test frames by the reflector. 0: default value for 2544 reflector. 1: sharemode for 2544 reflector. 2: exclusive mode for Y.1564 reflector. 3: test flow mode for Y.1564 reflector. | |||||||||||||
| CnqaReflectorDiscardPriority | 1.3.6.1.4.1.2011.5.25.111.11.1.1.17 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This object is used to configure the priority of Ethernet packets for reflector in the Ethernet service scenario. The default is 4294967295. | |||||||||||||
| CnqaReflectorDirection | 1.3.6.1.4.1.2011.5.25.111.11.1.1.18 | Unsigned32 (1..2) | RW | ||||||||||
column · Unsigned32 (1..2) · read-write · current Specifies the reflect direction. 1 indicates inbound. Reflect packets in manner of simulate product forwarding. 2 indicates outbound. Reflect packets in manner of output. | |||||||||||||
| CnqaReflectorEndTime | 1.3.6.1.4.1.2011.5.25.111.11.1.1.19 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the end time of the reflector, in seconds. | |||||||||||||
| CnqaReflectorExchangePort | 1.3.6.1.4.1.2011.5.25.111.11.1.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether exchange port. 0: disable 1: enable
| |||||||||||||
| CnqaReflectorTestFlowId | 1.3.6.1.4.1.2011.5.25.111.11.1.1.21 | OCTET STRING (SIZE (0..127)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..127)) · read-create · current This object indicates the ID of test flow. | |||||||||||||
| CnqaReflectorRowStatus | 1.3.6.1.4.1.2011.5.25.111.11.1.1.50 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object indicates the status of a row, which can be created or deleted but not modified. The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'. | |||||||||||||
| NnqaTestFlow | 1.3.6.1.4.1.2011.5.25.111.12 | ||||||||||||
| TnqaTestFlowTable | 1.3.6.1.4.1.2011.5.25.111.12.1 | NA | |||||||||||
table · not-accessible · current A table of NQA testflow definitions. | |||||||||||||
| RnqaTestFlowEntry | 1.3.6.1.4.1.2011.5.25.111.12.1.1 | NA | |||||||||||
| CnqaTestFlowId | 1.3.6.1.4.1.2011.5.25.111.12.1.1.1 | Unsigned32 | AN | ||||||||||
column · Unsigned32 · accessible-for-notify · current This object indicates the testflow ID, which is also the index of this table. | |||||||||||||
| CnqaTestFlowBeginDstMAC | 1.3.6.1.4.1.2011.5.25.111.12.1.1.2 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current This object indicates the beginning of destination MAC address. | |||||||||||||
| CnqaTestFlowEndDstMAC | 1.3.6.1.4.1.2011.5.25.111.12.1.1.3 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current This object indicates the end of destination MAC address. | |||||||||||||
| CnqaTestFlowBeginSrcMAC | 1.3.6.1.4.1.2011.5.25.111.12.1.1.4 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current This object indicates the beginning of source MAC address. | |||||||||||||
| CnqaTestFlowEndSrcMAC | 1.3.6.1.4.1.2011.5.25.111.12.1.1.5 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current This object indicates the end of source MAC address. | |||||||||||||
| CnqaTestFlowDstIPAddrType | 1.3.6.1.4.1.2011.5.25.111.12.1.1.6 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current This object indicates the type of destination IP address. | |||||||||||||
| CnqaTestFlowBeginDstIP | 1.3.6.1.4.1.2011.5.25.111.12.1.1.7 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current This object indicates the beginning of destination IP address. | |||||||||||||
| CnqaTestFlowEndDstIP | 1.3.6.1.4.1.2011.5.25.111.12.1.1.8 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current This object indicates the end of destination IP address. | |||||||||||||
| CnqaTestFlowSrcIPAddrType | 1.3.6.1.4.1.2011.5.25.111.12.1.1.9 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current This object indicates the type of source IP address. | |||||||||||||
| CnqaTestFlowBeginSrcIP | 1.3.6.1.4.1.2011.5.25.111.12.1.1.10 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current This object indicates the beginning of source IP address. | |||||||||||||
| CnqaTestFlowEndSrcIP | 1.3.6.1.4.1.2011.5.25.111.12.1.1.11 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current This object indicates the end of source IP address. | |||||||||||||
| CnqaTestFlowPevid | 1.3.6.1.4.1.2011.5.25.111.12.1.1.12 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates the PE VLAN ID. | |||||||||||||
| CnqaTestFlowBeginCevid | 1.3.6.1.4.1.2011.5.25.111.12.1.1.13 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates the beginning of CE VLAN ID. | |||||||||||||
| CnqaTestFlowEndCevid | 1.3.6.1.4.1.2011.5.25.111.12.1.1.14 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates the end of CE VLAN ID. | |||||||||||||
| CnqaTestFlowBeginUdpDstPort | 1.3.6.1.4.1.2011.5.25.111.12.1.1.15 | Unsigned32 (1..65535) | RC | ||||||||||
column · Unsigned32 (1..65535) · read-create · current This object indicates the beginning of UDP destination port. The default value is 7. | |||||||||||||
| CnqaTestFlowEndUdpDstPort | 1.3.6.1.4.1.2011.5.25.111.12.1.1.16 | Unsigned32 (1..65535) | RC | ||||||||||
column · Unsigned32 (1..65535) · read-create · current This object indicates the end of UDP destination port. | |||||||||||||
| CnqaTestFlowBeginUdpSrcPort | 1.3.6.1.4.1.2011.5.25.111.12.1.1.17 | Unsigned32 (1..65535) | RC | ||||||||||
column · Unsigned32 (1..65535) · read-create · current This object indicates the beginning of UDP source port. The default value is 49184. | |||||||||||||
| CnqaTestFlowEndUdpSrcPort | 1.3.6.1.4.1.2011.5.25.111.12.1.1.18 | Unsigned32 (1..65535) | RC | ||||||||||
column · Unsigned32 (1..65535) · read-create · current This object indicates the end of UDP source port. | |||||||||||||
| CnqaTestFlowCir | 1.3.6.1.4.1.2011.5.25.111.12.1.1.19 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates value of Committed Information Rate. | |||||||||||||
| CnqaTestFlowEir | 1.3.6.1.4.1.2011.5.25.111.12.1.1.20 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates value of Excess Information Rate. | |||||||||||||
| CnqaTestFlowFlr | 1.3.6.1.4.1.2011.5.25.111.12.1.1.21 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates value of Frame Loss Rate. | |||||||||||||
| CnqaTestFlowFtd | 1.3.6.1.4.1.2011.5.25.111.12.1.1.22 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates value of Frame Transfer Delay. | |||||||||||||
| CnqaTestFlowFdv | 1.3.6.1.4.1.2011.5.25.111.12.1.1.23 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates value of Frame Delay Variation. | |||||||||||||
| CnqaTestFlowCirSimpleTest | 1.3.6.1.4.1.2011.5.25.111.12.1.1.24 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When set to 'enable (1)', cir simple test is enabled.The default is disable(0).
| |||||||||||||
| CnqaTestFlowTrafficPolicing | 1.3.6.1.4.1.2011.5.25.111.12.1.1.25 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When set to 'enable (1)', traffic policing is enabled.The default is disable(0).
| |||||||||||||
| CnqaTestFlowDescription | 1.3.6.1.4.1.2011.5.25.111.12.1.1.26 | OCTET STRING (SIZE (0..127)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..127)) · read-write · current This object indicates the description information for testflow. | |||||||||||||
| CnqaTestFlowColorMode | 1.3.6.1.4.1.2011.5.25.111.12.1.1.27 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the color mode for testflow, the default value is colorblind(0).
| |||||||||||||
| CnqaTestFlowPriorityType | 1.3.6.1.4.1.2011.5.25.111.12.1.1.28 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object indicates the priority type of color mode.
| |||||||||||||
| CnqaTestFlowGreenBeginValue | 1.3.6.1.4.1.2011.5.25.111.12.1.1.29 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates the beginning of priority value of Green. | |||||||||||||
| CnqaTestFlowGreenEndValue | 1.3.6.1.4.1.2011.5.25.111.12.1.1.30 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates the end of priority value of Green. | |||||||||||||
| CnqaTestFlowYellowBeginValue | 1.3.6.1.4.1.2011.5.25.111.12.1.1.31 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates the beginning of priority value of Yellow. | |||||||||||||
| CnqaTestFlowYellowEndValue | 1.3.6.1.4.1.2011.5.25.111.12.1.1.32 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This object indicates the end of priority value of Yellow. | |||||||||||||
| CnqaTestFlowRowStatus | 1.3.6.1.4.1.2011.5.25.111.12.1.1.33 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object indicates the status of a row, which can be created or deleted but not modified. The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'. | |||||||||||||
| CnqaTestFlowDstMacModifierType | 1.3.6.1.4.1.2011.5.25.111.12.1.1.34 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object indicates the MAC address modifier type of a testflow. The default value is singleORrange(0). An increment specifies the rules for mathematically creating a range of values.
| |||||||||||||
| CnqaTestFlowDstMacModifierMask | 1.3.6.1.4.1.2011.5.25.111.12.1.1.35 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current This object specifies the MAC address modifier bits of value that applied to add the step value. The invalid value is 0-0-0. | |||||||||||||
| CnqaTestFlowDstMacModifierCount | 1.3.6.1.4.1.2011.5.25.111.12.1.1.36 | Unsigned32 (0..128) | RC | ||||||||||
column · Unsigned32 (0..128) · read-create · current This object indicates the number of MAC address modifier values. The invalid value is 0. | |||||||||||||
| CnqaTestFlowDstMacModifierStep | 1.3.6.1.4.1.2011.5.25.111.12.1.1.37 | Unsigned32 (0..128) | RC | ||||||||||
column · Unsigned32 (0..128) · read-create · current This object indicates MAC address modifier step. The invalid value is 0. | |||||||||||||
| CnqaTestFlowSrcMacModifierType | 1.3.6.1.4.1.2011.5.25.111.12.1.1.38 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object indicates the MAC address modifier type of a testflow. The default value is singleORrange(0). An increment specifies the rules for mathematically creating a range of values.
| |||||||||||||
| CnqaTestFlowSrcMacModifierMask | 1.3.6.1.4.1.2011.5.25.111.12.1.1.39 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current This object specifies the MAC address modifier bits of value that applied to add the step value. The invalid value is 0-0-0. | |||||||||||||
| CnqaTestFlowSrcMacModifierCount | 1.3.6.1.4.1.2011.5.25.111.12.1.1.40 | Unsigned32 (0..128) | RC | ||||||||||
column · Unsigned32 (0..128) · read-create · current This object indicates the number of MAC address modifier values. The invalid value is 0. | |||||||||||||
| CnqaTestFlowSrcMacModifierStep | 1.3.6.1.4.1.2011.5.25.111.12.1.1.41 | Unsigned32 (0..128) | RC | ||||||||||
column · Unsigned32 (0..128) · read-create · current This object indicates MAC address modifier step. The invalid value is 0. | |||||||||||||
| CnqaTestFlowDstIPModifierType | 1.3.6.1.4.1.2011.5.25.111.12.1.1.42 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object indicates the IP address modifier type of a testflow. The default value is singleORrange(0). An increment specifies the rules for mathematically creating a range of values.
| |||||||||||||
| CnqaTestFlowDstIPModifierMask | 1.3.6.1.4.1.2011.5.25.111.12.1.1.43 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current This object specifies the IP address modifier bits of value that applied to add the step value. | |||||||||||||
| CnqaTestFlowDstIPModifierCount | 1.3.6.1.4.1.2011.5.25.111.12.1.1.44 | Unsigned32 (0..128) | RC | ||||||||||
column · Unsigned32 (0..128) · read-create · current This object indicates the number of IP address modifier values. The invalid value is 0. | |||||||||||||
| CnqaTestFlowDstIPModifierStep | 1.3.6.1.4.1.2011.5.25.111.12.1.1.45 | Unsigned32 (0..128) | RC | ||||||||||
column · Unsigned32 (0..128) · read-create · current This object indicates IP address modifier step. The invalid value is 0. | |||||||||||||
| CnqaTestFlowSrcIPModifierType | 1.3.6.1.4.1.2011.5.25.111.12.1.1.46 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object indicates the IP address modifier type of a testflow. The default value is singleORrange(0). An increment specifies the rules for mathematically creating a range of values.
| |||||||||||||
| CnqaTestFlowSrcIPModifierMask | 1.3.6.1.4.1.2011.5.25.111.12.1.1.47 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current This object specifies the IP address modifier bits of value that applied to add the step value. | |||||||||||||
| CnqaTestFlowSrcIPModifierCount | 1.3.6.1.4.1.2011.5.25.111.12.1.1.48 | Unsigned32 (0..128) | RC | ||||||||||
column · Unsigned32 (0..128) · read-create · current This object indicates the number of IP address modifier values. The invalid value is 0. | |||||||||||||
| CnqaTestFlowSrcIPModifierStep | 1.3.6.1.4.1.2011.5.25.111.12.1.1.49 | Unsigned32 (0..128) | RC | ||||||||||
column · Unsigned32 (0..128) · read-create · current This object indicates IP address modifier step. The invalid value is 0. | |||||||||||||
Textual conventions
EnableValueINTEGERdisable(2)enable(1)Represents a boolean value.
HWLldpPortIdOCTET STRING (SIZE (1..255))This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies a agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
HWLldpPortIdSubtypeINTEGERagentCircuitId(6)interfaceAlias(1)interfaceName(5)local(7)macAddress(3)networkAddress(4)portComponent(2)LLDP interface ID sub type
NqaDistanceNodeTypeINTEGERmacAddress(1)mepID(2)Selection of destination addresses when MACPing is performed.
NqaOperationINTEGERftpGet(4)ftpPut(5)httpGet(2)httpPost(3)noOperation(1)Paras for specified test.
NqaTypeINTEGERdhcpAppl(12)dlswAppl(13)dnsAppl(11)ethernetService(39)ftpAppl(4)generalflow(38)gmacping(29)gmactrace(30)httpAppl(3)icmpAppl(6)icmpJitter(22)jitterAppl(5)lspJitter(20)lspPing(9)lspTraceRoute(10)mPing(16)mTracert(17)macPing(18)macTunnelPing(19)mactrace(31)pathJitter(23)pathMtu(21)pppoe(24)pwe3Ping(14)pwe3Tracert(15)rtpsnoop(37)rtptest(36)snmpAppl(7)tcpConnect(1)traceRoute(8)udpEcho(2)unknown(0)vplsMTrace(28)vplsmPing(25)vplsmacPing(26)vplsmacTrace(27)vplspwping(32)vplspwtrace(33)Select test type
ProtocolTypeINTEGERtcp(2)udp(1)unknown(0)Represents a boolean value.
Traps / Notifications
- nqaFTPStatsProbeFailed
1.3.6.1.4.1.2011.5.25.111.6.12 - nqaFTPStatsTestCompleted
1.3.6.1.4.1.2011.5.25.111.6.14 - nqaFTPStatsTestFailed
1.3.6.1.4.1.2011.5.25.111.6.13 - nqaFTPStatsThresholdNotification
1.3.6.1.4.1.2011.5.25.111.6.15 - nqaFallingAlarmNotification
1.3.6.1.4.1.2011.5.25.111.6.21 - nqaFtpSaveRecordNotification
1.3.6.1.4.1.2011.5.25.111.6.22 - nqaHTTPStatsProbeFailed
1.3.6.1.4.1.2011.5.25.111.6.5 - nqaHTTPStatsTestCompleted
1.3.6.1.4.1.2011.5.25.111.6.7 - nqaHTTPStatsTestFailed
1.3.6.1.4.1.2011.5.25.111.6.6 - nqaHTTPStatsThresholdNotification
1.3.6.1.4.1.2011.5.25.111.6.8 - nqaJitterStatsJitterThresholdNotificationDS
1.3.6.1.4.1.2011.5.25.111.6.26 - nqaJitterStatsJitterThresholdNotificationSD
1.3.6.1.4.1.2011.5.25.111.6.25 - nqaJitterStatsOWDThresholdNotificationDS
1.3.6.1.4.1.2011.5.25.111.6.18 - nqaJitterStatsOWDThresholdNotificationSD
1.3.6.1.4.1.2011.5.25.111.6.17 - nqaJitterStatsProbeFailed
1.3.6.1.4.1.2011.5.25.111.6.9 - nqaJitterStatsRTDThresholdNotification
1.3.6.1.4.1.2011.5.25.111.6.16 - nqaJitterStatsTestCompleted
1.3.6.1.4.1.2011.5.25.111.6.11 - nqaJitterStatsTestFailed
1.3.6.1.4.1.2011.5.25.111.6.10 - nqaNegotiateFailed
1.3.6.1.4.1.2011.5.25.111.6.19 - nqaPppoeStatsTestCompleted
1.3.6.1.4.1.2011.5.25.111.6.24 - nqaPppoeStatsTestFailed
1.3.6.1.4.1.2011.5.25.111.6.23 - nqaReflectorStateChangeNotification
1.3.6.1.4.1.2011.5.25.111.6.27 - nqaResultsProbeFailed
1.3.6.1.4.1.2011.5.25.111.6.1 - nqaResultsTestCompleted
1.3.6.1.4.1.2011.5.25.111.6.3 - nqaResultsTestFailed
1.3.6.1.4.1.2011.5.25.111.6.2 - nqaResultsTestResultChange
1.3.6.1.4.1.2011.5.25.111.6.28 - nqaResultsTestResultChangePackedNotification
1.3.6.1.4.1.2011.5.25.111.6.29 - nqaResultsTestResultStatusChange
1.3.6.1.4.1.2011.5.25.111.6.30 - nqaResultsThresholdNotification
1.3.6.1.4.1.2011.5.25.111.6.4 - nqaRisingAlarmNotification
1.3.6.1.4.1.2011.5.25.111.6.20