ISM-TRAP-MIB
Huawei Symantec Technologies Co.,LtdThe ISM-TRAP-MIB contains objects to query alarm informations.
snmptranslate -m ISM-TRAP-MIB -Tpsnmpwalk -v2c -c <community> -m ISM-TRAP-MIB <host> 1.3.6.1.4.1.34774Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihuaweistorage | 1.3.6.1.4.1.34774 | |||
identity The ISM-TRAP-MIB contains objects to query alarm informations. | ||||
| NhwStorage | 1.3.6.1.4.1.34774.4 | |||
| NhwISM | 1.3.6.1.4.1.34774.4.1 | |||
| NtrapAddress | 1.3.6.1.4.1.34774.4.1.2 | |||
| TforwardAddrTable | 1.3.6.1.4.1.34774.4.1.2.1 | NA | ||
table · not-accessible · current This table gives information about alarm forwarding address information, involving IP addresses, ports, and versions. This table is used exclusively for ISM management software and is not available to others. | ||||
| RforwardAddrEntry | 1.3.6.1.4.1.34774.4.1.2.1.1 | NA | ||
| CforwardAddrIndex | 1.3.6.1.4.1.34774.4.1.2.1.1.1 | OCTET STRING (SIZE (0..1024)) | RW | |
column · OCTET STRING (SIZE (0..1024)) · read-write · current Index to the alarm forwarding address. The value can be 0 to 3. | ||||
| CforwardAddrIP | 1.3.6.1.4.1.34774.4.1.2.1.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current IP address to which the alarm is forwarded. Only support IPv4 format. If domain names are supported and valid, the destination address is the IP address corresponding to the domain name; if the domain name is invalid, '0.0.0.0' is displayed. | ||||
| CforwardAddrPort | 1.3.6.1.4.1.34774.4.1.2.1.1.3 | Gauge32 | RC | |
column · Gauge32 · read-create · current Port of the alarm forwarding address. The value can be 1 to 65535. | ||||
| CforwardAddrTrapVer | 1.3.6.1.4.1.34774.4.1.2.1.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current Version of the alarm forwarding address. The value can be: 1: SNMPv1 2: SNMPv2c 3: SNMPv3 When configuring the alarm forwarding address, if this field is not filled, the default is SNMPv2c. | ||||
| CforwardAddrRowStatus | 1.3.6.1.4.1.34774.4.1.2.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row status value. The value can be: 1: Modify the alarm forwarding address 4: Add the alarm forwarding address 6: Delete the alarm forwarding address | ||||
| CforwardAddrIPNew | 1.3.6.1.4.1.34774.4.1.2.1.1.6 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current New alarm forwarding address. Support IPv4 or IPv6 format. If forwardAddrIP and forwardAddrIPNew fields are filled with values, take the value of the forwardAddrIPNew field by default. | ||||
| CforwardAddrTrapType | 1.3.6.1.4.1.34774.4.1.2.1.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current Type of the alarm forwarding address. The value can be: 1: Parsed. Sends parsed alarms to the alarm forwarding address (Trap OID:1.3.6.1.4.1.2011.2.91.10.2.1.0.1) 2: Original. Sends original alarms to the alarm forwarding address (Trap OID:1.3.6.1.4.1.34774.4.1.4.2). 3: All. sends Parsed, Original, and Parsed_alarm_oid alarms to the destination address for trap forwarding. 4: Parsed_alarm_oid. sends parsed alarms to the destination address for trap forwarding. (Each alarm corresponds to one OID. Products later than V3R6 support the alarm OID). 5: Parsed_time_string. Sends parsed alarms to the destination address for trap forwarding (Products V3R3C20SPC200 and later than V3R6 support this trap type. Trap OID: 1.3.6.1.4.1.2011.2.251.20.1.2.1) 6: Original_time_string. Sends original alarms to the destination address for trap forwarding (Products V3R3C20SPC200 and later than V3R6 support this trap type. Trap OID: 1.3.6.1.4.1.2011.2.251.20.2.1.1). When configuring the alarm forwarding address, if this field is not filled, the default is Original. | ||||
| CforwardAddrUSMUserName | 1.3.6.1.4.1.34774.4.1.2.1.1.8 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current USM user name of the destination address for trap forwarding. When the trap forwarding address type is SNMPv3, this field is mandatory and users must ensure a specified USM user exists in the system. Otherwise, this operation fails to be performed. If this field is mandatory, and the parameter is not delivered or no value is specified for the parameter, the system default value is Kaimse. | ||||
| Nevent | 1.3.6.1.4.1.34774.4.1.3 | |||
| TeventTable | 1.3.6.1.4.1.34774.4.1.3.1 | NA | ||
table · not-accessible · current This table gives device alarm information, which can be queried. This table is used exclusively for ISM management software and is not available to others. | ||||
| ReventEntry | 1.3.6.1.4.1.34774.4.1.3.1.1 | NA | ||
| ChwIsmEventType | 1.3.6.1.4.1.34774.4.1.3.1.1.1 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Alarm type. The value can be: 0: Event 1: Fault 2: Recovery | ||||
| ChwIsmEventID | 1.3.6.1.4.1.34774.4.1.3.1.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current Original alarm ID. It indicates a collection of alarms with the same category. | ||||
| ChwIsmEventLevel | 1.3.6.1.4.1.34774.4.1.3.1.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Alarm severity. The value can be: 2: Info 3: Warning 5: Major 6: Critical | ||||
| ChwIsmEventSequence | 1.3.6.1.4.1.34774.4.1.3.1.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Alarm SN, namely, unique identifier of the alarm. | ||||
| ChwIsmEventTime | 1.3.6.1.4.1.34774.4.1.3.1.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current UTC time when the alarm was generated, unit: seconds. | ||||
| ChwIsmEventRecoveryTime | 1.3.6.1.4.1.34774.4.1.3.1.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current UTC time when the alarm was cleared, unit: seconds. | ||||
| ChwIsmEventParameter | 1.3.6.1.4.1.34774.4.1.3.1.1.7 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Alarm location parameter. This parameter can be used to resolve alarm description. It is used with the alarm configuration file of the upper-layer network management system. | ||||
| ChwIsmEventRowStatus | 1.3.6.1.4.1.34774.4.1.3.1.1.20 | RowStatus | RW | |
column · RowStatus · read-write · current Row status value. The value can be: 1: Row Active 6: Remove a alarm according to the alarm serial number. | ||||
| NtrapEvent | 1.3.6.1.4.1.34774.4.1.3.3 | |||
| ShwIsmTrapEventType | 1.3.6.1.4.1.34774.4.1.3.3.1 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Alarm type. The value can be: 0: Event 1: Fault 2: Recovery | ||||
| ShwIsmTrapEventID | 1.3.6.1.4.1.34774.4.1.3.3.2 | Counter64 | AN | |
scalar · Counter64 · accessible-for-notify · current Original alarm ID. | ||||
| ShwIsmTrapEventLevel | 1.3.6.1.4.1.34774.4.1.3.3.3 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Alarm severity. The value can be: 2: Info 3: Warning 5: Major 6: Critical | ||||
| ShwIsmTrapEventSequence | 1.3.6.1.4.1.34774.4.1.3.3.4 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Alarm SN, namely, unique identifier of the alarm. | ||||
| ShwIsmTrapEventTime | 1.3.6.1.4.1.34774.4.1.3.3.5 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current UTC time when the alarm was generated, unit: seconds. | ||||
| ShwIsmTrapEventRecoveryTime | 1.3.6.1.4.1.34774.4.1.3.3.6 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current UTC time when the alarm was cleared, unit: seconds. | ||||
| ShwIsmTrapEventParameter | 1.3.6.1.4.1.34774.4.1.3.3.7 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current Alarm location parameter. This parameter can be used to resolve alarm description. It is used with the alarm configuration file of the upper-layer network management system. | ||||
| ShwIsmTrapEventID32Bit | 1.3.6.1.4.1.34774.4.1.3.3.8 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Alarm ID of I2000 network management software. | ||||
| ShwIsmTrapEventTimeStr | 1.3.6.1.4.1.34774.4.1.3.3.9 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current Time when an alarm was generated. string format. | ||||
| ShwIsmTrapEventRecoveryTimeStr | 1.3.6.1.4.1.34774.4.1.3.3.10 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current Time when an alarm was cleared. string format. | ||||
| NnotificationType | 1.3.6.1.4.1.34774.4.1.4 | |||
| !eventType | 1.3.6.1.4.1.34774.4.1.4.2 | |||
notification · current This table is used exclusively for ISM management software and is not available to others. | ||||
| NisoConformance | 1.6 | |||
| NisoGroups | 1.6.1 | |||
| GcurrentObjectGroup | 1.6.1.1 | |||
group · current Enter the description of the created OBJECT-GROUP.
| ||||
| GcurrentNotificationGroup | 1.6.1.2 | |||
| NisoCompliances | 1.6.2 | |||
| MbasicCompliance | 1.6.2.1 | |||
compliance · current Enter the description of the created MODULE-COMPLIANCE. | ||||
Textual conventions
NodeCodeStringOCTET STRING (SIZE (15..17))Display hint:
255acharacters in length.
Traps / Notifications
- eventType
1.3.6.1.4.1.34774.4.1.4.2