HUAWEI-XPON-MIB
HUAWEI Technology Co.,LtdThe MIB module defines MIB objects which provides GPON and EPON management NMS interfaces.
snmptranslate -m HUAWEI-XPON-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-XPON-MIB <host> 1.3.6.1.4.1.2011.6.128Imports
| HUAWEI-MIB | huaweiMgmt, huaweiUtility |
|---|---|
| IF-MIB | ifIndex |
| RMON-MIB | EntryStatus, OwnerString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TimeTicks, Unsigned32, iso, mib-2, zeroDotZero |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IhwXponDeviceMIB | 1.3.6.1.4.1.2011.6.128 | ||||||||||||
identity The MIB module defines MIB objects which provides GPON and EPON management NMS interfaces. | |||||||||||||
| NhwXponDeviceObjectMIB | 1.3.6.1.4.1.2011.6.128.1 | ||||||||||||
| NhwXponDeviceObjects | 1.3.6.1.4.1.2011.6.128.1.1 | ||||||||||||
| NhwXponDeviceGlobalObjects | 1.3.6.1.4.1.2011.6.128.1.1.1 | ||||||||||||
| ShwXponDeviceAutoFindOntAge | 1.3.6.1.4.1.2011.6.128.1.1.1.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The aging time of the auto-found ONT, which can be 0s (indicating that the ONT will not aging) or a value from 100s to 300s. | |||||||||||||
| ShwXponDeviceAutoFindInterval | 1.3.6.1.4.1.2011.6.128.1.1.1.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Indicates the SN request interval, ranging from 1(s) to 10(s). | |||||||||||||
| ShwXponDeviceModeCfgSwitch | 1.3.6.1.4.1.2011.6.128.1.1.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used to change XPON management mode. When xpon mode is changed from profile mode to distributing mode and there are xpon data or xpon board information in system, the system will automatically save data and reboot,and will cause all configuration of XPON lost. When the mode is changed from distributing mode to profile mode, the system will automatically save data and reboot. The operation can not cause the configuration of XPON lost. Options: 1. distributingmode(1) - XPON distributing mode 2. profilemode(2) - XPON profile mode
| |||||||||||||
| ShwGponDeviceMulticastGemportId | 1.3.6.1.4.1.2011.6.128.1.1.1.21 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The special GEM port ID is used for the multicast service, ranging from 4000 to 4095. | |||||||||||||
| ShwGponDeviceBaseGemportId | 1.3.6.1.4.1.2011.6.128.1.1.1.22 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The base GEM port is used when the board's car-mode is port-cos, ranging from 128 to 3872. | |||||||||||||
| ShwGponDeviceMinimumBandwidth | 1.3.6.1.4.1.2011.6.128.1.1.1.23 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The scalar is used to configure the minimum bandwidth of the T-CONTs in the system, ranging from 384 to 1024. | |||||||||||||
| ShwXponDeviceAutoDetectRogueOntNew | 1.3.6.1.4.1.2011.6.128.1.1.1.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used to open or close the switch of rogue ONT automatic detection. Options: 1.on(1) - Open the switch of rogue ONT automatic detection 2.off(2) - Close the switch of rogue ONT automatic detection The default value is off(2).
| |||||||||||||
| ShwGponDeviceDbaBandwidthType | 1.3.6.1.4.1.2011.6.128.1.1.1.25 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used to select the type of bandwidth. Options: 1.gpon(1) - Indicates that the type of bandwidth is GPON 2.ethernet(2) - Indicates that the type of bandwidth is ETH The default value is gpon(1).
| |||||||||||||
| ShwGponDeviceDbaAssignmentMode | 1.3.6.1.4.1.2011.6.128.1.1.1.26 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used to select the DBA assignment mode. Options: 1.maxbandwidthusage(1) - Indicates that the usage of bandwidth is maximum 2.minloopdelay(2) - Indicates that the loop delay is minimum 3.manual(3) - Indicates that the DBA assignment mode is manual,this value can not set now
| |||||||||||||
| ShwEponDeviceCtcOuiId | 1.3.6.1.4.1.2011.6.128.1.1.1.41 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current This object is used to set the Organizationally Unique Identifier. | |||||||||||||
| ShwEponDeviceChangePasswordIntervalTime | 1.3.6.1.4.1.2011.6.128.1.1.1.42 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The interval time of ONT's password renew, ranging from 1(s) to 254(s). | |||||||||||||
| NhwXponDeviceControlObjects | 1.3.6.1.4.1.2011.6.128.1.1.2 | ||||||||||||
| ThwGponDeviceOltControlInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.21 | NA | |||||||||||
table · not-accessible · current The control table of the GPON OLT. The index of this table is ifIndex. | |||||||||||||
| RhwGponDeviceOltControlInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1 | NA | |||||||||||
row · not-accessible · current The control table of the GPON OLT. The index of this entry is ifIndex.
| |||||||||||||
| ChwGponDeviceOltControlNearest | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This is the fiber distance between the OLT and the nearest ONT. For GPON, the fiber distance between the OLT and the nearest ONT is 0 km to 40 km while the maximum fiber distance between the farthest and the nearest ONTs is 20 km. For XG-PON, the fiber distance between the OLT and the nearest ONT is 0 km to 60 km while the maximum fiber distance between the farthest and the nearest ONTs is 40 km. | |||||||||||||
| ChwGponDeviceOltControlFarthest | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This is the fiber distance between the OLT and the farthest ONT. For GPON, the fiber distance between the OLT and the nearest ONT is 0 km to 60 km while the maximum fiber distance between the farthest and the nearest ONTs is 20 km. For XG-PON, the fiber distance between the OLT and the nearest ONT is 0 km to 100 km while the maximum fiber distance between the farthest and the nearest ONTs is 40 km. | |||||||||||||
| ChwGponDeviceOltControlDnFecEnabled | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the downstream FEC switch. Options: 1. enable(1) - Enable the downstream FEC switch 2. disable(2) - Disable the downstream FEC switch 3. invalid(-1) - Indicates that the query fails or no information is detected For GPON, the default value is disable(2). For XG-PON, the default value is enable(1).
| |||||||||||||
| ChwGponDeviceOltControlAutofindOntEnable | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the ONT auto find switch. Options: 1. enable(1) - Enable the ONT auto find switch 2. disable(2) - Disable the ONT auto find switch 3. invalid(-1) - Indicates that the query fails or no information is detected The default value is disable(2).
| |||||||||||||
| ChwGponDeviceOltControlChangePasswordAge | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ONT password update period. 0 means no update, range: 0 or 5~1440 minutes. | |||||||||||||
| ChwGponDeviceOltControlDespt | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.6 | OCTET STRING (SIZE (0..80)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..80)) · read-write · current This object indicates the description of GPON port. | |||||||||||||
| ChwGponDeviceOltControlLeftBandWidth | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the untapped bandwidth of the port. | |||||||||||||
| ChwGponDeviceOltControlMinBandwidth | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the minimum bandwidth of T-CONTs in the OLT port. | |||||||||||||
| ChwGponDeviceOltControlLaserSwitch | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the laser switch of the GPON port. Options: 1. on(1) - Open the laser switch of the GPON port 2. off(2) - Close the laser switch of the GPON port 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOltControlStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the GPON port status in the OLT. Options: 1. up(1) - Indicates that the GPON port is normal 2. down(2) - Indicates that the GPON port is fault
| |||||||||||||
| ChwGponDeviceOltControlManualDetectRogueOnt | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of the rogue ONT manual detection. Options: 1. startup(1) - Start up the switch of the rogue ONT manual detection 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOltControlIlegalIncurRogueOntExt | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object is used to query whether there are Illegal incursionary rogue ONTs under port. Options: 1. inexistent(0) - Indicates that there are not Illegal incursionary rogue ONTs under port 2. existent(1) - Indicates that there are Illegal incursionary rogue ONTs under port 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOltControlOpticModuleStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the optical module status on GPON port. Options: 1. online(1) - Indicates that the optical module is online 2. offline(2) - Indicates that the optical module is offline 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOltControlAvailableBandWidth | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the available bandwidth of the port. | |||||||||||||
| ChwGponDeviceOltObjectOpticAlarmProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.15 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the optical alarm profile that is bound to the port. | |||||||||||||
| ChwGponDeviceOltControlOntNum | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.16 | Integer32 | RO | 0 | |||||||||
| ChwGponDeviceOltLastUpTime | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.17 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the port last went online. | |||||||||||||
| ChwGponDeviceOltLastDownTime | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.18 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the port last went offline. | |||||||||||||
| ChwGponDeviceOltLastDownCause | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the reason why the port last went offline. Options: 1. los(1) - Loss of signal 2. opticModuleAbsence(2) - The optic module is absence 3. opticModuleFault(3) - The optic module is fault 4. opticPortClosed(4) - The optic port is closed 5. otherCause(-1) - Other cause
| |||||||||||||
| ChwGponDeviceOltControlTcontNumCombined | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.20 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of the combined T-CONTs. | |||||||||||||
| ChwGponDeviceOltControlTcontNumInCard | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.21 | Integer32 | RO | 0 | |||||||||
| ChwGponDeviceOltControlEnergySavingFlag | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.22 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Energy saving state of the GPON port. Options: 1. yes (1) - The GPON port is in energy saving state 2. no (2) - The GPON port is not in energy saving state
| |||||||||||||
| ChwGponDeviceOltControlManualCheckRogueOnt | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.23 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of the rogue ONT manual check. Options: 1. startup(1) - Start up the switch of the rogue ONT manual checked 2. invalid(-1) - Indicates that the query fails or no information is checked
| |||||||||||||
| ChwGponDeviceOltControlPortReset | 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.24 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This parameter is used to reset the port. Options: 1. reset(1) - Indicates that the port resets 2. invalid(-1) - Indicates that the query fails or no information is checked
| |||||||||||||
| ThwGponOltOpticsModuleInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.22 | NA | |||||||||||
table · not-accessible · current This table is used to query the information about the optical transceiver. The index of this table is ifIndex. | |||||||||||||
| RhwGponOltOpticsModuleInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the information about the optical transceiver. The index of this entry is ifIndex.
| |||||||||||||
| ChwGponOltOpticsModuleInfoIdentifier | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the type of serial transceiver. Options: 1. unknown(1) - Unknown or unspecified 2. gbic(2) - GBIC 3. solderedToMotherboard(3) - Module soldered to motherboard 4. sfp(4) - SFP or SFP Plus 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleInfoExtID | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the extended identifier of type of serial transceiver. Options: 1. notSpecifiedOrNotCompliant(1) - Not specified or not compliant with a defined MOD_DEF 2. moddef1(2) - GBIC is compliant with MOD_DEF 1 3. moddef2(3) - GBIC is compliant with MOD_DEF 2 4. moddef3(4) - GBIC is compliant with MOD_DEF 3 5. byTwowireOnly(5) - GBIC/SFP function is defined by two-wire interface ID only 6. moddef5(6) - GBIC is compliant with MOD_DEF 5 7. moddef6(7) - GBIC is compliant with MOD_DEF 6 8. moddef7(8) - GBIC is compliant with MOD_DEF 7 9. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleInfoConnector | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. copperConnector1(3) - Fibre Channel Style 1 copper connector 4. copperConnector2(4) - Fibre Channel Style 2 copper connector 5. bnctnc(5) - BNC/TNC 6. coaxialHeaders(6) - Fibre Channel coaxial headers 7. fiberJack(7) - FiberJack 8. lc(8) - LC 9. mtrj(9) - MT-RJ 10. mu(10) - MU 11. sg(11) - SG 12. opticalPigtail(12) - Optical pigtail 13. hssdcII(13) - HSSDC II 14. copperPigtail(14) - Copper Pigtail 15. mpoParallelOptic(15) - MPO Parallel Optic 16. rj45(16) - RJ45 17. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleInfoEncoding | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the code for serial encoding algorithm. Options: 1. unspecified(1) - Unspecified 2. encodingMethod8B10B(2) - 8B10B 3. encodingMethod4B5B(3) - 4B5B 4. nrz(4) - NRZ 5. manchester(5) - Manchester 6. sonetScrambled(6) - SONET Scrambled 7. encodingMethod64B66B(7) - 64B66B 8. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleInfoBrNominal | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the nominal bit rate, units of 100 MBits/sec. | |||||||||||||
| ChwGponOltOpticsModuleInfoLength9Micronkm | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for 9/125 micron fiber, units of 1000 m. | |||||||||||||
| ChwGponOltOpticsModuleInfoLength9Micron | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for 9/125 micron fiber, units of 100 m. | |||||||||||||
| ChwGponOltOpticsModuleInfoLength50Micron | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for 50/125 micron fiber, units of 10 m. | |||||||||||||
| ChwGponOltOpticsModuleInfoLength62Micron5 | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for 62.5/125 micron fiber, units of 10 m. | |||||||||||||
| ChwGponOltOpticsModuleInfoLengthCopper | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for copper, units of meters. | |||||||||||||
| ChwGponOltOpticsModuleInfoVendorName | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.11 | OCTET STRING (SIZE (0..17)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the SFP vendor name (ASCII). | |||||||||||||
| ChwGponOltOpticsModuleInfoVendorOUI | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.12 | OCTET STRING (SIZE (0..9)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..9)) · read-only · current This object indicates the SFP vendor IEEE company ID. | |||||||||||||
| ChwGponOltOpticsModuleInfoVendorPN | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.13 | OCTET STRING (SIZE (0..17)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the part number provided by SFP vendor (ASCII). | |||||||||||||
| ChwGponOltOpticsModuleInfoVendorRev | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.14 | OCTET STRING (SIZE (0..5)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..5)) · read-only · current This object indicates the revision level for part number provided by vendor (ASCII). | |||||||||||||
| ChwGponOltOpticsModuleInfoWaveLength | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the laser wavelength, units of nm. | |||||||||||||
| ChwGponOltOpticsModuleInfoCcBase | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the check code for Base ID Fields. | |||||||||||||
| ChwGponOltOpticsModuleInfoOptions | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.17 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates which optional transceiver signals are implemented. bit Description of option 10 Cooled laser transmitter 9 Power Level 2 requirement 8 Linear Receiver Output 7-6 Reserved 5 RATE_SELECT 4 TX_DISABLE 3 TX_FAULT 2 LOS (signal inverted from standard definition) 1 LOS (signal as defined in SFP MSA) 0 Reserved | |||||||||||||
| ChwGponOltOpticsModuleInfoBrMax | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.18 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the upper bit rate margin, units of %. | |||||||||||||
| ChwGponOltOpticsModuleInfoBrMin | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.19 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the lower bit rate margin, units of %. | |||||||||||||
| ChwGponOltOpticsModuleInfoVendorSN | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.20 | OCTET STRING (SIZE (0..17)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the serial number provided by vendor (ASCII). | |||||||||||||
| ChwGponOltOpticsModuleInfoDateCode | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.21 | OCTET STRING (SIZE (0..9)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..9)) · read-only · current This object indicates manufacturing date code of the vendor (ASCII). | |||||||||||||
| ChwGponOltOpticsModuleInfoDiagnosticMonitoringType | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.22 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates which type of diagnostic monitoring is implemented. bit Description of Diagnostic Monitoring Type 7 Reserved 6 Digital diagnostic monitoring 5 Internally Calibrated 4 Externally Calibrated 3 Received power measurement type:(0 = OMA, 1 = Average) 2 Address change required 1-0 Reserved | |||||||||||||
| ChwGponOltOpticsModuleInfoEnhancedOptions | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.23 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 Alarm/warning flags 6 TX_DISABLE control and monitoring 5 TX_FAULT monitoring 4 RX_LOS monitoring 3 RATE_SELECT control and monitoring 2 Application Select control 1 Rate Select control 0 Reserved | |||||||||||||
| ChwGponOltOpticsModuleInfoSFF8472Compliance | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.24 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates which revision of SFF-8472 the transceiver complies Options: 1. undefined(1) - Not included or undefined 2. includesRev93SFF8472(2) - Includes functionality described in Rev 9.3 3. includesRev95SFF8472(3) - Includes functionality described in Rev 9.5 4. includesRev102SFF8472(4) - Includes functionality described in Rev 10.2 5. includesRev104SFF8472(5) - Includes functionality described in Rev 10.4 6. includesRev110SFF8472(6) - Includes functionality described in Rev 11.0 7. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleInfoCcExt | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.25 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the check code for the Extended ID Fields. | |||||||||||||
| ChwGponOltOpticsModuleInfoVendorSpecific | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.26 | OCTET STRING (SIZE (0..33)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..33)) · read-only · current This object indicates the vendor Specific EEPROM. | |||||||||||||
| ChwGponOltOpticsModuleXponType | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.27 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the type of the optical transceiver. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpon10g(5) - 10G GPON 6. wdmpon(6) - WDM PON 7. hybridpon(7) - Hybrid PON 8. gponepon(8) - GPON/EPON 9. xgspon(9) - XGS-PON 10.gponandxgpon(10) - GPON+XG-PON 11.gponandxgspon(11) - GPON+XGS-PON 12.twdmpon(15) - TWDM-PON 13.invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleXponSubType | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.28 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the sub type of the optical transceiver. Options: 1. unknown(1) - Unknown 2. classbplus(101) - CLASS B+ 3. classcplus(102) - CLASS C+ 4. classb(103) - CLASS B 5. classcplusplus(104) - CLASS C++ 6. classcd(105) - CLASS D 7. px20(201) - PX20 8. px20plus(202) - PX20+ 9. px20plusplus(203) - PX20++ 10. pr30(301) - PR30 11.pr20(302) - PR20 12.prx30(303) - PRX30 13.prx20(304) - PRX20 14.prx40(305) - PRX40 15.pr40(306) - PR40 16.prx30e(307) - PRX30-E 17.prx40e(308) - PRX40-E 18.pr30plus(309) - PR30+ 19.n2a(405) - N2a 20.n2b(406) - N2b 21.n1(407) - N1 22.e1(408) - E1 23.e2a(409) - E2a 24.e2b(410) - E2b 25.d1(411) - D1 26.d2(412) - D2 27.n2(413) - N2 28.e2(414) - E2 29.classbPlusAndPx20Plus(501) - GPON CLASS B+/EPON PX20+ 30.classbAndPx20(502) - GPON CLASS B/EPON PX20 31.invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleXponUsedType | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.29 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5. catvtriplex(5) - CATV TriPlex 6. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleXponEncapsulationType | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.30 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF 2x10 4. sfp(4) - SFP 5. xfp(5) - XFP 6. lxfp(6) - LXFP 7. bosaonboard(7) - BOSA ON BOARD 8. sfpplus(8) - SFP+ 9. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOltOpticsModuleInfoPartNum | 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.31 | OCTET STRING (SIZE (0..16)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..16)) · read-only · current Indicate the part number of a optical module provided by Huawei. | |||||||||||||
| ThwGponOltOpticsDdmInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.23 | NA | |||||||||||
table · not-accessible · current This table is used to query the diagnostic information about the optical transceiver of the GPON port. The index of this table is ifIndex. | |||||||||||||
| RhwGponOltOpticsDdmInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.23.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the diagnostic information about the optical transceiver of the GPON port. The index of this entry is ifIndex.
| |||||||||||||
| ChwGponOltOpticsDdmInfoTemperature | 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.1 | Integer32 | RO | 28 | |||||||||
| ChwGponOltOpticsDdmInfoSupplyVoltage | 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.2 | Integer32 | RO | 322 | |||||||||
| ChwGponOltOpticsDdmInfoTxBiasCurrent | 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.3 | Integer32 | RO | 32 | |||||||||
| ChwGponOltOpticsDdmInfoTxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.4 | Integer32 | RO | 711 | |||||||||
| ChwGponOltOpticsDdmInfoRxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.5 | Integer32 | RO | 2147483647 | |||||||||
column · Integer32 · read-only · current This object indicates the optics received power, units of 0.01dBm. Example values from LibreNMS test devices
| |||||||||||||
| ThwEponOltXFPOpticsModuleInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.24 | NA | |||||||||||
table · not-accessible · current This table is used to query the optics module informationof the 10G EPON port. The index of this table is ifIndex. | |||||||||||||
| RhwEponOltXFPOpticsModuleInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the optics module informationof the 10G EPON port. The index of this entry is ifIndex.
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoIdentifier | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the type of serial transceiver. Options: 1. unknown(0) - Unknown or unspecified 2. gbic(1) - GBIC 3. solderedToMotherboard(2) - Module soldered to motherboard 4. sfp(3) - SFP 5. pin300XBI(4) - PIN300XBI 6. xenpak(5) - XENPAK 7. xfp(6) - XFP 8. xff(7) - XFF 9. xfep(8) - XFEP 10. xpak(9) - XPAK 11. x2(10) - X2 12. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoExtCLEICode | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the extclei code. Options: 1. nonExtCLEICode(0) - No CLEI code present in Table 02h 2. extCLEICode(1) - CLEI code present in Table 02h 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoExtTXRefClock | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the txref clock. Options: 1. nonExtTXRefClock(0) - TX Ref Clock Input Not Required 2. extTXRefClock(1) - TX Ref Clock Input Required 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoExtCDRFunc | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the CDR function. Options: 1. nonExtCDRFunc(0) - Non-CDR version of XFP 2. extCDRFunc(1) - Module with CDR function 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoExtPowerLevel | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the power level. Options: 1. extPowerLevel1(0) - Power Level 1 Module (1.5 W max. power dissipation.) 2. extPowerLevel2(1) - Power Level 2 Module (2.5W Max) 3. extPowerLevel3(2) - Power Level 3 Module (3.5W max. power dissipation.) 4. extPowerLevel4(3) - Power Level 4 Module (>3.5W max. power dissipation.) 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoConnector | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. copperConnector1(3) - Fibre Channel Style 1 copper connector 4. copperConnector2(4) - Fibre Channel Style 2 copper connector 5. bnctnc(5) - BNC/TNC 6. coaxialHeaders(6) - Fibre Channel coaxial headers 7. fiberJack(7) - FiberJack 8. lc(8) - LC 9. mtrj(9) - MT-RJ 10. mu(10) - MU 11. sg(11) - SG 12. opticalPigtail(12) - Optical pigtail 13. hssdcII(13) - HSSDC II 14. copperPigtail(14) - Copper Pigtail 15. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoEncodingRZ | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the EncodingRZ. Options: 1. nonEncodingRZ(0) - Encoding Don't Support RZ 2. encodingRZ(1) - Encoding Support RZ 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoEncodingNRZ | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the EncodingNRZ. Options: 1. nonEncodingNRZ(0) - Encoding Don't Support NRZ 2. encodingNRZ(1) - Encoding Support NRZ 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoEncoding8B10B | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the Encoding8B10B. Options: 1. nonEncoding8B10B(0) - Encoding Don't Support 8B10B 2. encoding8B10B(1) - Encoding Support 8B10B 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoEncoding64B | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the Encoding64B. Options: 1. nonEncoding64B(0) - Encoding Don't Support 64B/66B 2. encoding64B(1) - Encoding Support 64B/66B 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoBrMin | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Minimum bit rate, units of 100 MBits/s. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoBrMax | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Maximum bit rate, units of 100 MBits/s. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoSupportLenSMF | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link length supported for SMF fiber in km. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoSupportLenE50um | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link length supported for EBW 50/125 um fiber, units of 2 m. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoSupportLen50um | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link length supported for 50/125 um fiber, units of 1 m. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoSupportLen62p5um | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link length supported for 62.5/125 um fiber, units of 1 m. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoSupportLenCopper | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.17 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link length supported for copper, units of 1m. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoTransmitterSupport | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the transmitter support. Options: 1. nonTunable(0) - Transmitter Not Support Tunable 2. tunable(1) - Transmitter Support Tunable 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoDetector | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the transmitter support. Options: 1. pin(0) - PIN 2. apd(1) - APD 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoWavelengthControl | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.20 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the wavelength control. Options: 1. nonSupport(0) - Wavelength control NonSupport 2. support(1) - Wavelength control Support 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoCooledTransmitterDevice | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.21 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the cooled transmitter device. Options: 1. nonSupport(0) - Cooled transmitter device NonSupport 2. support(1) - Cooled transmitter device Support 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoTransmitterTechnologySupport | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.22 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the transmitter technology support. Options: 1. vCSEL850(0) - vCSEL850 2. vCSEL1310(1) - vCSEL1310 3. vCSEL1550(2) - vCSEL1550 4. fP1310(3) - fP1310 5. dFB1310(4) - dFB1310 6. dFB1550(5) - dFB1550 7. eML1310(6) - eML1310 8. eML1550(7) - eML1550 9. cOPPER(8) - cOPPER 10. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoVendorName | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.23 | OCTET STRING (SIZE (0..17)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the XFP vendor name (ASCII). | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoSupportXFIMode | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.24 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the XFI mode. Options: 1. nonSupportXFIMode(0) - Don't Support XFI Loopback Mode 2. supportXFIMode(1) - XFI Loopback Mode Supported 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoSupportLinesideMode | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.25 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the XFI mode. Options: 1. nonSupportLinesideMode(0) - Don't Support Lineside Loopback Mode 2. supportLinesideMode(1) - Lineside Loopback Mode Supported 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoMaxBitRateSupportedByCDR | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the max bit rate by CDR. Options: 1. cDRNosupport(0) - CDR not support 2. maxBitRateSupportedByCDR11p1(1) - CDR support for 11.1 Gb/s 3. maxBitRateSupportedByCDR10p7(3) - CDR support for 10.7 Gb/s 4. maxBitRateSupportedByCDR10p5(7) - CDR support for 10.5 Gb/s 5. maxBitRateSupportedByCDR10p3(15) - CDR support for 10.3 Gb/s 6. maxBitRateSupportedByCDR9p95(31) - CDR support for 9.95 Gb/s 7. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoVendorOUI | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.27 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Vendor OUI. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoVendorPN | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.28 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the Vendor PN. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoVendorRev | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.29 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the Vendor rev. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoF51 | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.30 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Wavelength. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoWaveTolerance | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.31 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the WaveTolerance. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoMaxCaseTemperature | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.32 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Maximum Case Temperature in Degrees C. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoCcbase | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.33 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Cc_base. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoMaxDissipation | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.34 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Maximum Power Dissipation. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoMaxDissipationPowerDownMode | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.35 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Maximum Total Power Dissipation in Power Down Mode. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoMaximum5P0VSupply | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.36 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Maximum current required by +5V Supply. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoMaximum3P3VSupply | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.37 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Maximum current required by +3.3V Supply. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoMaximum1P8VSupply | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.38 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Maximum current required by +1.8V Supply. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoMaximum5P2VSupply | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.39 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Maximum current required by -5.2V Supply. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoVendorSN | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.40 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the Vendor SN. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoDateCode | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.41 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the Date code. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoDiagnoMonitorPowerMeasure | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.42 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the Received power measurement type. Options: 1. supportOMA(0) - OMA 2. supportAveragePower(1) - Average Power 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoDiagnoMonitorTypeFECBER | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.43 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the Module Respond to FEC BER. Options: 1. nonSupportBER(0) - No BER Support 2. supportBER(1) - BER Support 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoEnhancedOptions | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.44 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 Module Supports Optional VPS 6 Optional Soft TX_DISABLE implemented 5 Optional Soft P_down implemented 4 Supports VPS LV regulator mode 3 Supports VPS bypassed regulator Mode 2 Active FEC control functions implemented 1 Wavelength tunability implemented 0 Optional CMU Support Mode invalid(-1) - Indicates that the query fails or no information is detected | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoAuxInputOne | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.45 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the optics Aux Input One. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. auxInputType3(2) - 1G Tx Bias Current 4. auxInputType4(3) - TEC Current (mA) 5. auxInputType5(4) - Laser Temperature 6. auxInputType6(5) - Laser Wavelength 7. auxInputType7(6) - +5V Supply Voltage 8. auxInputType8(7) - 1G Tx Power 9. auxInputType9(8) - +1.8V Supply Voltage 10. auxInputType10(9) - -5.2V Supply Voltage 11. auxInputType11(10) - +5V Supply Current 12. auxInputType14(13) - +3.3V Supply Current 13. auxInputType15(14) - +1.8V Supply Current 14. auxInputType16(15) - -5.2V Supply Current 15. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoAuxInputTwo | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.46 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the optics Aux Input two. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. auxInputType3(2) - 1G Tx Bias Current 4. auxInputType4(3) - TEC Current (mA) 5. auxInputType5(4) - Laser Temperature 6. auxInputType6(5) - Laser Wavelength 7. auxInputType7(6) - +5V Supply Voltage 8. auxInputType8(7) - 1G Tx Power 9. auxInputType9(8) - +1.8V Supply Voltage 10. auxInputType10(9) - -5.2V Supply Voltage 11. auxInputType11(10) - +5V Supply Current 12. auxInputType14(13) - +3.3V Supply Current 13. auxInputType15(14) - +1.8V Supply Current 14. auxInputType16(15) - -5.2V Supply Current 15. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleInfoCCEXT | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.47 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the CC_EXT . | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoWavelengthFor2d5G | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.48 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Wavelength for 2.5G. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoWavelengthFor1d25G | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.49 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Wavelength for 1.25G. | |||||||||||||
| ChwEponOltXFPOpticsModuleInfoVendorSpecific | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.50 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the Vendor specific. | |||||||||||||
| ChwEponOltXFPOpticsModuleXponType | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.51 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the module type. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpon10g(5) - 10G GPON 6. wdmpon(6) - WDM PON 7. hybridpon(7) - Hybrid PON 8. gponepon(8) - GPON/EPON 9. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleXponSubType | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.52 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the sub module type.
Options:
1. unknown(1) - Unknown
2. classbplus(101) - CLASS B+
3. classcplus(102) - CLASS C+
4. classb(103) - CLASS B
5. classcplusplus(104) - CLASS C++
6. px20(201) - PX20
7. px20plus(202) - PX20+
8. px20plusplus(203) - PX20++
9. pr30(301) - PR30
10.pr20(302) - PR20
11.prx30(303) - PRX30
12.prx20(304) - PRX20
13.prx40(305) - PRX40
14.pr40(306) - PR40
15.prx30e(307) - PRX30E
16.prx40e(308) - PRX40E
17.pr30plus(309) - PR3PLUS
18.n2a(405) - N2a
19.n2b(406) - N2b
20.n1(407) - N1
21.e1(408) - E1
22.e2a(409) - E2a
23.e2b(410) - E2b
24.invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleXponUsedType | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.53 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleXponEncapsulationType | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.54 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF 2x10 4. sfp(4) - SFP 5. xfp(5) - XFP 6. lxfp(6) - LXFP 7. bosaonboard(7) - BOSA ON BOARD 8. sfpplus(8) - SFP+ 9. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleXponTemperatureLevel | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.55 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. commercial(2) - commercial 3. industry(3) - industry 4. expandtemperature(4) - expand temperature 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltXFPOpticsModuleXponOPMprecision | 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.56 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the OPM precision. Options: 1. unknown(1) - Unknown 2. db3(2) - 3db 3. db1(3) - 1db 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponDeviceOltControlInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.31 | NA | |||||||||||
table · not-accessible · current This table implements the control of the EPON port. The index of this table is ifIndex. | |||||||||||||
| RhwEponDeviceOltControlInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1 | NA | |||||||||||
row · not-accessible · current This table implements the control of the EPON port. The index of this entry is ifIndex.
| |||||||||||||
| ChwEponDeviceOltControlfarthest | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the fiber distance between the OLT and the farthest ONT EPON: 0-40 km 10 Gb/s EPON: 0-60 km | |||||||||||||
| ChwEponDeviceOltControlAutofindOntEnable | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the ONT auto find switch. Options: 1. enable(1) - Enable the ONT auto find switch 2. disable(2) - Disable the ONT auto find switch 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOltControlDespt | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.3 | OCTET STRING (SIZE (0..80)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..80)) · read-write · current This object indicates the description of the EPON port. | |||||||||||||
| ChwEponDeviceOltControlLaserSwitch | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the laser switch of the EPON port. Options: 1. on(1) - Open the laser switch of the EPON port 2. off(2) - Close the laser switch of the EPON port 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOltControlStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the EPON port status in the OLT: Options: 1. up(1) - Indicates that the EPON port is normal 2. down(2) - Indicates that the EPON port is fault
| |||||||||||||
| ChwEponDeviceOltControlUpStreamBandWidth | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the up-stream bandwidth of EPON port. | |||||||||||||
| ChwEponDeviceOltControlDownStreamBandWidth | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the down-stream bandwidth of EPON port. | |||||||||||||
| ChwEponDeviceOltControlOpticAlarmProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.8 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the short delay switch status that is saved in the database of the OLT. | |||||||||||||
| ChwEponDeviceOltLowTimeLapseSwitch | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is used to query the short delay switch status that is saved in the database of the OLT. | |||||||||||||
| ChwEponDeviceOltEffectiveFlag | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is the flag indicating whether the buffer function takes effect immediately. | |||||||||||||
| ChwEponOltLowTimeLapseStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the status of the EPON low time switch. | |||||||||||||
| ChwEponDeviceOltControlOntNum | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indictates the number of ONTs that are added to the port. | |||||||||||||
| ChwEponDeviceOltControlVlanTagMode | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the configuration function of the VLAN tag mode of the PON port. Options: 1. tagbasedont(1) - Tag-based-ont 2. tagbasedvlan(2) - Tag-based-vlan 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOltLastUpTime | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.14 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the port last goes online. | |||||||||||||
| ChwEponDeviceOltLastDownTime | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.15 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the port last goes offline. | |||||||||||||
| ChwEponDeviceOltLastDownCause | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the reason why the port last goes offline. Options: 1. los(1) - Loss of signal 2. opticModuleAbsence(2) - The optic module is absence 3. opticModuleFault(3) - The optic module is fault 4. opticPortClosed(4) - The optic port is closed 5. otherCause(-1) - Other cause
| |||||||||||||
| ChwEponDeviceOltControlLeftBandWidth | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.17 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the untapped bandwidth of 1G upstream ONT's port, unit Kbps. | |||||||||||||
| ChwEponDeviceOltControlAvailableBandWidth | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.18 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the available bandwidth of 1G upstream ONT's port, unit Kbps. | |||||||||||||
| ChwEponDeviceOltControlManualDetectRogueOnt | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of the rogue ONT manual detection. Options: 1. startup(1) - Starts up the switch of the rogue ONT manual detection 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOltRogueOntExist | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.20 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object is used to query whether there are Illegal incursionary rogue ONTs under port. Options: 1. inexistent(0) - Indicates that there are not Illegal incursionary rogue ONTs under port 2. existent(1) - Indicates that there are Illegal incursionary rogue ONTs under port
| |||||||||||||
| ChwEponDeviceOltLeftBandWidth10GUpstream | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.21 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the untapped bandwidth of 10G upstream ONT's port, unit Kbps. | |||||||||||||
| ChwEponDeviceOltAvailableBandWidth10GUpstream | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.22 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the available bandwidth of 10G upstream ONT's port, unit Kbps. | |||||||||||||
| ChwEponDeviceOltControlAlarmProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.23 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the alarm profile that is bound to the EPON port. | |||||||||||||
| ChwEponDeviceOltControlWarningProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.24 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the warning profile that is bound to the EPON port. | |||||||||||||
| ChwEponDeviceOltControlEnergySavingFlag | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.25 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Energy saving state of the EPON port. Options: 1. yes (1) - The EPON port is in energy saving state 2. no (2) - The EPON port is not in energy saving state
| |||||||||||||
| ChwEponDeviceOltControlManualCheckRogueOnt | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.26 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of the rogue ONT manual check. Options: 1. startup(1) - Start up the switch of the rogue ONT manual checked 2. invalid(-1) - Indicates that the query fails or no information is checked
| |||||||||||||
| ChwEponDeviceOltControlPortReset | 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.27 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This parameter is used to reset the port. Options: 1. reset(1) - Indicates that the port resets 2. invalid(-1) - Indicates that the query fails or no information is checked
| |||||||||||||
| ThwEponOltOpticsModuleInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.32 | NA | |||||||||||
table · not-accessible · current Show the optics module information. The index of this table is ifIndex. | |||||||||||||
| RhwEponOltOpticsModuleInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1 | NA | |||||||||||
row · not-accessible · current Show the optics module information. The index of this entry is ifIndex.
| |||||||||||||
| ChwEponOltOpticsModuleInfoIdentifier | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the type of serial transceiver. Options: 1. unknown(1) - Unknown or unspecified 2. gbic(2) - GBIC 3. solderedToMotherboard(3) - Module soldered to motherboard 4. sfp(4) - SFP or SFP Plus 5. invalid (-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltOpticsModuleInfoExtID | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the extended identifier of type of serial transceiver. Options: 1. notSpecifiedOrNotCompliant(1) - Not specified or not compliant with a defined MOD_DEF 2. moddef1(2) - GBIC is compliant with MOD_DEF 1 3. moddef2(3) - GBIC is compliant with MOD_DEF 2 4. moddef3(4) - GBIC is compliant with MOD_DEF 3 5. byTwowireOnly(5) - GBIC/SFP function is defined by two-wire interface ID only 6. moddef5(6) - GBIC is compliant with MOD_DEF 5 7. moddef6(7) - GBIC is compliant with MOD_DEF 6 8. moddef7(8) - GBIC is compliant with MOD_DEF 7 9. invalid (-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltOpticsModuleInfoConnector | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. copperConnector1(3) - Fibre Channel Style 1 copper connector 4. copperConnector2(4) - Fibre Channel Style 2 copper connector 5. bnctnc(5) - BNC/TNC 6. coaxialHeaders(6) - Fibre Channel coaxial headers 7. fiberJack(7) - FiberJack 8. lc(8) - LC 9. mtrj(9) - MT-RJ 10. mu(10) - MU 11. sg(11) - SG 12. opticalPigtail(12) - Optical pigtail 13. hssdcII(13) - HSSDC II 14. copperPigtail(14) - Copper Pigtail 15. mpoParallelOptic(15) - MPO Parallel Optic 16. rj45(16) - RJ45 17. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltOpticsModuleInfoEncoding | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the code for serial encoding algorithm. Options: 1. unspecified(1) - Unspecified 2. encodingMethod8B10B(2) - 8B10B 3. encodingMethod4B5B(3) - 4B5B 4. nrz(4) - NRZ 5. manchester(5) - Manchester 6. sonetScrambled(6) - SONET Scrambled 7. encodingMethod64B66B(7) - 64B66B 8. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltOpticsModuleInfoBrNominal | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the nominal bit rate, units of 100 MBits/sec. | |||||||||||||
| ChwEponOltOpticsModuleInfoLength9Micronkm | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for 9/125 micron fiber, units of 1000 m. | |||||||||||||
| ChwEponOltOpticsModuleInfoLength9Micron | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for 9/125 micron fiber, units of 100 m. | |||||||||||||
| ChwEponOltOpticsModuleInfoLength50Micron | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for 50/125 micron fiber, units of 10 m. | |||||||||||||
| ChwEponOltOpticsModuleInfoLength62Micron5 | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for 62.5/125 micron fiber, units of 10 m. | |||||||||||||
| ChwEponOltOpticsModuleInfoLengthCopper | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link length supported for copper, units of meters. | |||||||||||||
| ChwEponOltOpticsModuleInfoVendorName | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.11 | OCTET STRING (SIZE (0..17)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the SFP vendor name (ASCII). | |||||||||||||
| ChwEponOltOpticsModuleInfoVendorOUI | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.12 | OCTET STRING (SIZE (0..9)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..9)) · read-only · current This object indicates the SFP vendor IEEE company ID. | |||||||||||||
| ChwEponOltOpticsModuleInfoVendorPN | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.13 | OCTET STRING (SIZE (0..17)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the part number provided by SFP vendor (ASCII). | |||||||||||||
| ChwEponOltOpticsModuleInfoVendorRev | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.14 | OCTET STRING (SIZE (0..5)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..5)) · read-only · current This object indicates the revision level for part number provided by vendor (ASCII). | |||||||||||||
| ChwEponOltOpticsModuleInfoWaveLength | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the laser wavelength, units of nm. | |||||||||||||
| ChwEponOltOpticsModuleInfoCcBase | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the check code for Base ID Fields. | |||||||||||||
| ChwEponOltOpticsModuleInfoOptions | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.17 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates which optional transceiver signals are implemented. bit Description of option 10 Cooled laser transmitter 9 Power Level 2 requirement 8 Linear Receiver Output 7-6 Reserved 5 RATE_SELECT 4 TX_DISABLE 3 TX_FAULT 2 LOS (signal inverted from standard definition) 1 LOS (signal as defined in SFP MSA) 0 Reserved | |||||||||||||
| ChwEponOltOpticsModuleInfoBrMax | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.18 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the upper bit rate margin, units of %. | |||||||||||||
| ChwEponOltOpticsModuleInfoBrMin | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.19 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the lower bit rate margin, units of %. | |||||||||||||
| ChwEponOltOpticsModuleInfoVendorSN | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.20 | OCTET STRING (SIZE (0..17)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the serial number provided by vendor (ASCII). | |||||||||||||
| ChwEponOltOpticsModuleInfoDateCode | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.21 | OCTET STRING (SIZE (0..9)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..9)) · read-only · current This object indicates manufacturing date code of the vendor (ASCII). | |||||||||||||
| ChwEponOltOpticsModuleInfoDiagnosticMonitoringType | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.22 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates which type of diagnostic monitoring is implemented. bit Description of Diagnostic Monitoring Type 7 Reserved 6 Digital diagnostic monitoring 5 Internally Calibrated 4 Externally Calibrated 3 Received power measurement type:(0 = OMA, 1 = Average) 2 Address change required 1-0 Reserved | |||||||||||||
| ChwEponOltOpticsModuleInfoEnhancedOptions | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.23 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 Alarm/warning flags 6 TX_DISABLE control and monitoring 5 TX_FAULT monitoring 4 RX_LOS monitoring 3 RATE_SELECT control and monitoring 2 Application Select control 1 Rate Select control 0 Reserved | |||||||||||||
| ChwEponOltOpticsModuleInfoSFF8472Compliance | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.24 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates which revision of SFF-8472 the transceiver complies Options: 1. undefined(1) - Not included or undefined 2. includesRev93SFF8472(2) - Includes functionality described in Rev 9.3 3. includesRev95SFF8472(3) - Includes functionality described in Rev 9.5 4. includesRev102SFF8472(4) - Includes functionality described in Rev 10.2 5. includesRev104SFF8472(5) - Includes functionality described in Rev 10.4 6. includesRev110SFF8472(6) - Includes functionality described in Rev 11.0 7. invalid (-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltOpticsModuleInfoCcExt | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.25 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the check code for the Extended ID Fields. | |||||||||||||
| ChwEponOltOpticsModuleInfoVendorSpecific | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.26 | OCTET STRING (SIZE (0..33)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..33)) · read-only · current This object indicates the vendor Specific EEPROM. | |||||||||||||
| ChwEponOltOpticsModuleXponType | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.27 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the type of the optical transceiver. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpon10g(5) - 10G GPON 6. wdmpon(6) - WDM PON 7. hybridpon(7) - Hybrid PON 8. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltOpticsModuleXponSubType | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.28 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the sub type of the optical transceiver. Options: 1. unknown(1) - Unknown 2. classbplus(101) - CLASS B+ 3. classcplus(102) - CLASS C+ 4. classb(103) - CLASS B 5. classcplusplus(104) - CLASS C++ 6. px20(201) - PX20 7. px20plus(202) - PX20+ 8. px20plusplus(203) - PX20++ 9. pr30(301) - PR30 10.pr20(302) - PR20 11.prx30(303) - PRX30 12.prx20(304) - PRX20 13.prx40(305) - PRX40 14.pr40(306) - PR40 15.prx30e(307) - PRX30-E 16.prx40e(308) - PRX40-E 17.pr30plus(309) - PR30+ 18.n2a(405) - N2a 19.n2b(406) - N2b 20.n1(407) - N1 21.e1(408) - E1 22.e2a(409) - E2a 23.e2b(410) - E2b 24.invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltOpticsModuleXponUsedType | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.29 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5.invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltOpticsModuleXponEncapsulationType | 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.30 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF 2x10 4. sfp(4) - SFP 5. xfp(5) - XFP 6. lxfp(6) - LXFP 7. bosaonboard(7) - BOSA ON BOARD 8.invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponOltOpticsDdmInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.33 | NA | |||||||||||
table · not-accessible · current This table is used to query the diagnostic information about the optical transceiver of the EPON port. The index of this table is ifIndex. | |||||||||||||
| RhwEponOltOpticsDdmInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.33.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the diagnostic information about the optical transceiver of the EPON port. The index of this entry is ifIndex.
| |||||||||||||
| ChwEponOltOpticsDdmInfoTemperature | 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the optics temperature, units of C(centigrade). | |||||||||||||
| ChwEponOltOpticsDdmInfoSupplyVoltage | 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the supply voltage, units of 0.01V. | |||||||||||||
| ChwEponOltOpticsDdmInfoTxBiasCurrent | 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the optics current, units of mA. | |||||||||||||
| ChwEponOltOpticsDdmInfoTxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the optics send power, units of 0.01dBm. | |||||||||||||
| ChwEponOltOpticsDdmInfoRxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the optics receive power, units of 0.01dBm. | |||||||||||||
| ThwXponOntLoadSelectTable | 1.3.6.1.4.1.2011.6.128.1.1.2.41 | NA | |||||||||||
table · not-accessible · current It is used to add ont to loading list and query the loading state for ONT. The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. | |||||||||||||
| RhwXponOntLoadSelectEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.41.1 | NA | |||||||||||
row · not-accessible · current It is used to add ont to loading list and query the loading state for ONT. The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex.
| |||||||||||||
| ChwXponDeviceOntIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT ID, range: 0~255. The value of 255 indicates that ONT ID is invalid or ignored in process of ont loading. | |||||||||||||
| ChwXponOntLoadSelectState | 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the loading state of the ONT. Options: 1. ready(1) - Indicates that the loading state of the ONT is ready 2. loading(2) - Indicates that the loading state of the ONT is loading 3. success(3) - Indicates that the loading state of the ONT is success 4. fail(4) - Indicates that the loading state of the ONT is fail 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponOntLoadSelectProgress | 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the loading progress of the ONT | |||||||||||||
| ChwXponOntLoadSelectRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwXponOntLoadSelectPriority | 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is used to set the priority of an ONT loading task. A smaller value represents a higher priority. | |||||||||||||
| ChwXponOntLoadSelectActiveMode | 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to configure the effect mode of an loaded ONT. Options: 1. nextstartup(1) - Indicates that the ONT takes effect after next startup 2. immediate(2) - Indicates that the ONT takes effect immediately 3. graceful(3) - Indicates that the ONT takes effect gracefully 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| NhwXponOntLoadCtrlTable | 1.3.6.1.4.1.2011.6.128.1.1.2.42 | ||||||||||||
| ShwXponOntLoadFileType | 1.3.6.1.4.1.2011.6.128.1.1.2.42.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object indicates the ONT file type. Options: 1. app(1) - Application load 2. cfg(2) - Configuration load 3. inValidFileType(255) - Indicates that the query fails or no information is detected
| |||||||||||||
| ShwXponOntLoadServerIpAddr | 1.3.6.1.4.1.2011.6.128.1.1.2.42.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current This object indicates the server IP address. | |||||||||||||
| ShwXponOntLoadProtocol | 1.3.6.1.4.1.2011.6.128.1.1.2.42.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object indicates the transfer protocol. Options: 1. tftp(1) - TFTP 2. ftp(2) - FTP 3. sftp(3) - SFTP 4. inValidProtocol(255) - Indicates that the query fails or no information is detected
| |||||||||||||
| ShwXponOntLoadFileName | 1.3.6.1.4.1.2011.6.128.1.1.2.42.4 | OCTET STRING (SIZE (0..80)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..80)) · read-write · current This object indicates the file name. | |||||||||||||
| ShwXponOntLoadUserName | 1.3.6.1.4.1.2011.6.128.1.1.2.42.5 | OCTET STRING (SIZE (0..16)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..16)) · read-write · current This object indicates the user name. | |||||||||||||
| ShwXponOntLoadPassword | 1.3.6.1.4.1.2011.6.128.1.1.2.42.6 | OCTET STRING (SIZE (0..16)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..16)) · read-write · current This object indicates the password. | |||||||||||||
| ShwXponOntLoadAdminStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.42.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object indicates the ONT loading flag. Options: 1. start(1) - Indicates that the loading of ONT is started 2. stop(2) - Indicates that the loading of ONT is stopped 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ShwXponOntLoadXmlIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.42.8 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current F/S/P of ONT loading xml file. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ShwXponOntLoadXmlOntObjectIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.42.9 | Integer32 (-1 | 0..255) | RW | ||||||||||
scalar · Integer32 (-1 | 0..255) · read-write · current ONT ID of loading xml file. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ShwXponOntLoadImageActiveMode | 1.3.6.1.4.1.2011.6.128.1.1.2.42.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Active mode of ont loading. Options: 1. nextstartup(1) - Indicates that the ONT takes effect after next startup 2. immediate(2) - Indicates that the ONT takes effect immediately 3. graceful(3) - Indicates that the ONT takes effect gracefully 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ShwXponOntLoadXmlAES128Key | 1.3.6.1.4.1.2011.6.128.1.1.2.42.11 | OCTET STRING (SIZE (0..16)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..16)) · read-write · current This object indicates the AES-128 cryptographic key for the ont xml file. This AES-128 key is 128bits(16 Bytes). | |||||||||||||
| ShwXponOntLoadServerPort | 1.3.6.1.4.1.2011.6.128.1.1.2.42.12 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current This object indicates the port of server for ont loading.
The TFTP port default value is 69.
The FTP port default value is 21.
The SFTP port default value is 22. | |||||||||||||
| ThwGponDeviceOntConfigInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.43 | NA | |||||||||||
table · not-accessible · current This table is used to create, modify, delete or query an ONT. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponDeviceOntConfigInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1 | NA | |||||||||||
row · not-accessible · current This table is used to create, modify, delete or query an ONT. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponDeviceOntIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT ID, range: 0-127. | |||||||||||||
| ChwGponDeviceOntAuthMethod | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the authentication mode for the ONT. Options: 1. sn(1) - Serial Number 2. snpassword(2) - SN and password 3. alwayson(3) - Password + always-on 4. onceon(4) - Password + once-on 5. loidalwayson (5) - LOID + always-on 6. loidonceon (6) - LOID + once-on 7. loidcheckcodealwayson (7) - LOID + CHECKCODE + always-on 8. loidcheckcodeonceon (8) - LOID + CHECKCODE + once-on 9. snorpassword(9) - SN or password 10.invalid(-1) - Indicates that the query fails or no information is detected If the hwGponDeviceOntAuthMethod leaf is not specified for creation of a table instance, the default authentication mode sn(1) is used.
| |||||||||||||
| ChwGponDeviceOntSn | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.3 | OCTET STRING (SIZE (8)) | RW | ||||||||||
column · OCTET STRING (SIZE (8)) · read-write · current This object indicates the configured ONT serial number. | |||||||||||||
| ChwGponDeviceOntPassword | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.4 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current This object indicates the ONT password. GPON password size (0..10) XG-PON password size (0..36) | |||||||||||||
| ChwGponDeviceOntTimeOut | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the registered working period of the ONT, ranging from 1 to 168 hours. The value (-1) indicates that there is no-aging time. | |||||||||||||
| ChwGponDeviceOntManagementMode | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the ONT management mode, including OMCI and SNMP. Options: 1. omci(1) - OMCI 2. snmp(2) - SNMP 3. extendFrame(3) - extendFrame 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntLineProfName | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.7 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the profile that is bound to the ONT. | |||||||||||||
| ChwGponDeviceOntServiceProfName | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.8 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the service profile that is bound to the ONT. | |||||||||||||
| ChwGponDeviceOntDespt | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.9 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current This object indicates the description of the ONT. | |||||||||||||
| ChwGponDeviceOntEntryStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row 3. active(1) -when this leaf is queried, the value is fixed to active(1) | |||||||||||||
| ChwGponDeviceOntProtectSide | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the ONT is the ONT on the protection side. Options: 1. protectside(1) - Indicates that the ONT is the ONT on the protection side 2. work(2) - Indicates that the ONT is the ONT on the work side
| |||||||||||||
| ChwGponDeviceOntPGMemberRole | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the role of the ont in the protect group. Options: 1. work(1) - Indicates that the role of the ONT is work 2. protect(2) - Indicates that the role of the ONT is protection 3. unjoined(-1) - Indicates that the ONT is not added to the protect group
| |||||||||||||
| ChwGponDeviceOntLoid | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.13 | OCTET STRING (SIZE (0..24)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-write · current The object indicates the LOID of the ONT. | |||||||||||||
| ChwGponDeviceOntCheckcode | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.14 | OCTET STRING (SIZE (0..12)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-write · current The object indicates the checkcode of the ONT. | |||||||||||||
| ChwGponDeviceOntReregisterAuthMode | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicate the type of the ont re-register type for once-on authentication mode, if the ont authentication mode is not once-on, the value is invalid. if the ont authentication mode is once-on, the default is snPassword. Options: 1. sn(1) -Indicate the re-register type of the ont is sn authentication type 2. snPassword(2) -Indicate the re-register type of the ont is snPassword authentication type 3. invalid(-1) -Indicate the re-register type of the ont is invalid
| |||||||||||||
| ChwGponDeviceOntInfoAuthEffectMode | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates the effect taking mode after the ONT authentication mode is changed. The default effect taking mode is immediate. Options: 1. immediate (1) -Indicates that the change will take effect immediately. 2. nextstartup (2) -Indicates that the change will take effect when the ONT goes online next time. 3. invalid (-1) -Indicates that the effect taking mode is invalid.
| |||||||||||||
| ChwGponDeviceOntNniType | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.17 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the NNI type of the ONT. Options: 1. rate2dot5G1dot25G (1) -Downstream rate 2.5Gbps, upstream rate 1.25Gbps. 2. rate10G2dot5G (2) -Downstream rate 10Gbps, upstream rate 2.5Gbps. 3. rate10G10G (3) -Downstream rate 10Gbps, upstream rate 10Gbps. 4. auto(4) -Indicates the actual ont nni type is automatically selected. 5. invalid (-1) -Indicates the invalid value.
| |||||||||||||
| ChwGponDeviceOntManualSwitchChannelIfindex | 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.18 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Indicates the destination channel's ifindex that the ont switch to. Only the ont under a dynamic channel group support to switch channel. | |||||||||||||
| ThwGponDeviceOntExtendConfigTable | 1.3.6.1.4.1.2011.6.128.1.1.2.44 | NA | |||||||||||
table · not-accessible · current This is the ONT extend function configuration table. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponDeviceOntExtendConfigEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.44.1 | NA | |||||||||||
row · not-accessible · current This is the ONT extend function configuration table. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponDeviceOntCfgAlarmProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.44.1.1 | OCTET STRING (SIZE (0..33)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..33)) · read-write · current The name of the ONT alarm profile. | |||||||||||||
| ChwGponDeviceOntCfgSnmpProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.44.1.2 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current The name of the ONT SNMP profile. | |||||||||||||
| ChwGponDeviceOntExtCfgOpticAlarmProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.44.1.3 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the optical alarm profile that is bound to the ONT. | |||||||||||||
| ThwGponDeviceOntVersionInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.45 | NA | |||||||||||
table · not-accessible · current This is the ONT version information table. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponDeviceOntVersionInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1 | NA | |||||||||||
row · not-accessible · current This is the ONT version information table. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponDeviceOntVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.1 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current The ONT version number. | |||||||||||||
| ChwGponDeviceOntVendorId | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT VendorID. | |||||||||||||
| ChwGponDeviceOntProductId | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT productID. | |||||||||||||
| ChwGponDeviceOntEquipmentId | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.4 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current This object indicates the ONT equipmentID. | |||||||||||||
| ChwGponDeviceOntMainSoftVer | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.5 | OCTET STRING (SIZE (0..14)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..14)) · read-only · current The active softerware version of the ONT. | |||||||||||||
| ChwGponDeviceOntStandbySoftVer | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.6 | OCTET STRING (SIZE (0..14)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..14)) · read-only · current The standby software version of the ONT. | |||||||||||||
| ChwGponDeviceOntSoftwareWorkMode | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object indicates the software working mode of the GPON ONT. Options: 1. normal(1) - Normal 2. survivalmode(2) - Survival mode
| |||||||||||||
| ChwGponDeviceOntCustomizedInfo | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.8 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT customize information. | |||||||||||||
| ChwGponDeviceOntEquipmentSn | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.9 | OCTET STRING (SIZE (0..25)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..25)) · read-only · current This object indicates the ONT Equipment Sn. | |||||||||||||
| ChwGponDeviceOntMac | 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.10 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current This object indicates the ONT MAC address. | |||||||||||||
| ThwGponDeviceOntControlInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.46 | NA | |||||||||||
table · not-accessible · current This is the control table of the ONT. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponDeviceOntControlInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1 | NA | |||||||||||
row · not-accessible · current This is the control table of the ONT. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponDeviceOntControlActive | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to activate or deactivate an ONT. Options: 1. activate(1) - Activates an ONT 2. deactivate(2) - Deactivate an ONT 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlReset | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to reset an ONT. Options: 1. reset(1) - Reset an ONT 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlReRegister | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to re-register an ONT. Options: 1. reRegister(1) - Re-register an ONT 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlReDiscovery | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to reset the discovery status of an ONT. If the authentication mode is once-on(4), after performing the rediscovery operation, the registered working period is re-timed. Options: 1. rediscovery(1) - Reset the discovery status of an ONT 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlRunStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT running status. Options: 1. up(1) - Normal 2. down(2) - Fault 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlConfigStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This is the ONT configuration resume status. If it is failed(3), the ONT is down and the service is interrupted. If the config status is noresume (4), set the resume policy as resume for the system and re-register the ONT. Options: 1. initialization(1) - Indicates that the ONT configuration resume status is initialization 2. normal(2) - Indicates that the ONT configuration resume status is normal 3. failed(3) - Indicates that the ONT configuration resume status is failed 4. noresume(4) - Indicates that the ONT configuration resume status is not resumed 5. config(5) - Indicates that the ONT configuration resume status is configuration 6. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlDiscoveryStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT discovery state. Options: 1. on(1) - Indicates that the ONT discovery state is on 2. off(2) - Indicates that the ONT discovery state is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlMatchStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT match status. Options: 1. initialization(1) - Indicates that the ONT is initialization 2. match(2) - Indicates that the ONT is matched 3. mismatch(3) - Indicates that the ONT is mismatched 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlDbaStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the DBA report status. Options: 1. nsr(1) - NSR 2. sr(2) - SR 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlRanging | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.20 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the result of the ONT ranging. Unit: m Options: 1. invalid (-1) - Indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntControlMacCount | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.21 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of MAC addresses that are learned by the ONT. | |||||||||||||
| ChwGponDeviceOntControlLastUpTime | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.22 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the ONT last went online. | |||||||||||||
| ChwGponDeviceOntControlLastDownTime | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.23 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the ONT last went offline. | |||||||||||||
| ChwGponDeviceOntControlLastDownCause | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.24 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the reason why the ONT last went offline. The value (1) indicates that the reason is LOS(Loss of signal), The value (2) indicates that the reason is LOSi(Loss of signal for ONUi) or LOBi (Loss of burst for ONUi), The value (3) indicates that the reason is LOFI(Loss of frame of ONUi), The value (4) indicates that the reason is SFI(Signal fail of ONUi), The value (5) indicates that the reason is LOAI(Loss of acknowledge with ONUi), The value (6) indicates that the reason is LOAMI(Loss of PLOAM for ONUi), The value (7) indicates that the reason is deactive ONT fails, The value (8) indicates that the reason is deactive ONT success, The value (9) indicates that the reason is reset ONT, The value (10) indicates that the reason is re-register ONT, The value (11) indicates that the reason is pop up fail, The value (13) indicates that the reason is dying-gasp, The value (15) indicates that the reason is LOKI(Loss of key synch with ONUi), The value (18) indicates that the reason is deactived ONT due to the ring, The value (30) indicates that the reason is shut down ONT optical module, The value (31) indicates that the reason is reset ONT by ONT command, The value (32) indicates that the reason is reset ONT by ONT reset button, The value (33) indicates that the reason is reset ONT by ONT software, The value (34) indicates that the reason is deactived ONT due to broadcast attack, The value (35) indicates that the reason is operator check fail, The value (37) indicates that the reason is a rogue ONT detected by itself, The value (-1) indicates that the query fails. | |||||||||||||
| ChwGponDeviceOntControlLastDyingGaspTime | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.25 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the ONT last went down due to Dying Gasp. | |||||||||||||
| ChwGponDeviceOntControlIsolationState | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT isolation status. Options: 1. normal(0) - Indicates that the ONT is normal 2. isolated(1) - Indicates that the ONT is isolated
| |||||||||||||
| ChwGponDeviceOntControlBatteryCurStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.27 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT battery status. Options: 1. notSupport(0) - Not support 2. charge(1) - Charge state 3. discharge(2) - Discharge state 4. holding(3) - Holding state 5. supportButInvalid(4) - Provisioned and present but cannot recharge 6. unknownStatus(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntControlTcontNumCombined | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.28 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of the combined T-CONTs. | |||||||||||||
| ChwGponDeviceOntControlLastRanging | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.29 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the result of the ONT last ranging. Unit: m Options: 1. invalid (-1) - Indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntControlActualSn | 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.30 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current The ONT's actual serial number. | |||||||||||||
| ThwGponDeviceOntCfgCapabilityTable | 1.3.6.1.4.1.2011.6.128.1.1.2.47 | NA | |||||||||||
table · not-accessible · current The ONT configuration capability table. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponDeviceOntCfgCapabilityEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1 | NA | |||||||||||
row · not-accessible · current The ONT configuration capability table. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponDeviceOntCfgCapManagementMode | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT's management mode, including omci and snmp. Options: 1. omci(1) - OMCI 2. snmp(2) - SNMP 3. extendFrame(3) - Extend Frame 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntCfgCapEthNum | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of ethernet ports. A special value of 0xFE (254) indicates the number of port is adaptive. The value is -1 when the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntCfgCapPotsNum | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of POTS ports. A special value of 0xFE (254) indicates the number of port is adaptive The value is -1 when the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntCfgCapIPSupport | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the IP address configuration mode. Options: 1. dhcp(1) - DHCP 2. static(2) - Indicates that the IP address configuration mode is static 3. unconfiguration(3) - Indicates that the IP address is not configuration 4. pppoe(4) - Indicates that the IP address configuration mode is pppoe 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntCfgCapTdmPortType | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the TDM port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntCfgCapTdmServiceType | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the TDM service type. Options: 1. tdmovergem(1) - Tdm over gem 2. cesop(2) - Cesop 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntCfgCapTdmNum | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of TDM ports. The value is -1 when the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntCfgCapMocaNum | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of MOCA ports. The value is -1 when the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntCfgCapCatvUniNum | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of CATV UNI ports. A special value of 0xFE (254) indicates the number of port is adaptive The value is -1 when the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntCfgCapGemNum | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of GEM ports. The value is -1 when the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntCfgCapGemMappingMode | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the mapping mode. Options: 1. vlan(1) - The mapping mode is vlan 2. pri8021p(2) - The mapping mode is 802.1p 3. vlanpri(3) - The mapping mode is vlan and 802.1p 4. port(4) - The mapping mode is port 5. vlanport(5) - The mapping mode is vlan and port 6. portpri(6) - The mapping mode is port and 802.1p 7. vlanpriport(7) - The mapping mode is vlan, port and 802.1p 8. e1t1port(8) - The mapping mode is the port of e1 and t1 9. iptos(9) - The mapping mode is iptos 10. vlaniptos(10) - The mapping mode is vlan and iptos 11. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntCfgCapTcontNum | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of T-CONTs. The value is -1 when the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntCfgCapFCType | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the type of flow control. Options: 1. pq(1) - The type of flow control is PQ 2. gemportcar(2) - The type of flow control is the gemportcar 3. flowcar(3) - The type of flow control is the flowcar 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntCfgCapVdslPortNum | 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of VDSL ports. A special value of 0xFE (254) indicates the number of port is adaptive. The value is -1 when the query fails or no information is detected. | |||||||||||||
| ThwGponDeviceAutoFindOntInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.48 | NA | |||||||||||
table · not-accessible · current This table is used to query the information about the auto-found ONTs in the system. The index of this table is a combination of ifIndex and hwGponDeviceAutoFindOntInfoOntIndex. | |||||||||||||
| RhwGponDeviceAutoFindOntInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the information about the auto-found ONTs in the system. The index of this entry is a combination of ifIndex and hwGponDeviceAutoFindOntInfoOntIndex. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoOntIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The index of the auto-found ONT. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoSn | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.2 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the ONT serial number. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoPassword | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the ONT password. GPON password size (0..10) XG-PON password size (0..36) | |||||||||||||
| ChwGponDeviceAutoFindOntInfoOntVendorId | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT vendorid. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoOntVer | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.5 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the ONT Version. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoOntMainSoftVer | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.6 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the ONT MainSoftVer. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoOntEquipmentId | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.7 | OCTET STRING (SIZE (20)) | RO | ||||||||||
column · OCTET STRING (SIZE (20)) · read-only · current This object indicates the ONT EquipmentId. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoOntAutoFindTime | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.8 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time for ONT's auto find. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoLoid | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.9 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT LOID. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoCheckcode | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.10 | OCTET STRING (SIZE (0..12)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-only · current This object indicates the ONT CHECKCODE | |||||||||||||
| ChwGponDeviceAutoFindOntInfoCustomizedInfo | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.11 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT customize information. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoOntNniType | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT actual rate type. Options: 1. rate2dot5G1dot25G(1) - Downstream rate 2.5Gbps, upstream rate 1.25Gbps 2. rate10G2dot5G(2) - Downstream rate 10Gbps, upstream rate 2.5Gbps 3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceAutoFindOntInfoEquipmentSn | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.13 | OCTET STRING (SIZE (0..25)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..25)) · read-only · current This object indicates the ONT Equipment Sn. | |||||||||||||
| ChwGponDeviceAutoFindOntInfoMac | 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.14 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current This object indicates the ONT MAC address. | |||||||||||||
| ThwGponDeviceOntIpConfigInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.49 | NA | |||||||||||
table · not-accessible · current This is the ONT IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntIpIndex. | |||||||||||||
| RhwGponDeviceOntIpConfigInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1 | NA | |||||||||||
row · not-accessible · current This is the ONT IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntIpIndex. | |||||||||||||
| ChwGponDeviceOntIpConfigMode | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the IP configuration mode. Options: 1. dhcp(1) - DHCP 2. static(2) - Indicates that the IP configuration mode is static 3. unconfiguration(3) - Indicates that the IP is not configuration 4. configurationFile(4) - Indicates that the IP is configuration file 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntIpAddress | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the IP address. | |||||||||||||
| ChwGponDeviceOntNetMask | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the Subnet mask. | |||||||||||||
| ChwGponDeviceOntPhyAddress | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.4 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current This object indicates the ONT MAC address. | |||||||||||||
| ChwGponDeviceOntNetGateway | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.5 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the default network gateway. | |||||||||||||
| ChwGponDeviceOntMasterDNS | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.6 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the active DNS address. | |||||||||||||
| ChwGponDeviceOntSlaveDNS | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.7 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the slave DNS address. | |||||||||||||
| ChwGponDeviceOntIpConfigVlan | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the management VLAN of ONT. range: 0-4095 | |||||||||||||
| ChwGponDeviceOntIpConfigPriority | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The management priority of ONT. range: 0-7, 0xfe: dscpMapping, -1: invalid value. | |||||||||||||
| ChwGponDeviceOntIpIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.10 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the IP index of the ont IP host | |||||||||||||
| ChwGponDeviceOntIpconfigDscpDefaultPriority | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the default priority for dscpMapping policy. range: 0-7 | |||||||||||||
| ChwGponDeviceOntIpconfigDscpProfIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the dscp profile index of the ONT ip host. | |||||||||||||
| ChwGponDeviceOntIpconfigDhcpReset | 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used for resetting the ip host in the DHCP mode. Options: 1. reset(1) - DHCP reset in the DHCP mode 2. invalid(-1) - invalid
| |||||||||||||
| ThwGponDeviceOntAlarmStateInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.50 | NA | |||||||||||
table · not-accessible · current The table is used to query the state of the ONT alarms. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponDeviceOntAlarmStateInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.50.1 | NA | |||||||||||
row · not-accessible · current The table is used to query the state of the ONT alarms. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponDeviceOntAlarmSDi | 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the signal degrade (SDi) alarm. 1: no alarm is generated; 2: alarm is generated. | |||||||||||||
| ChwGponDeviceOntAlarmSFi | 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the signal fail (SFi) alarm. 1: no alarm is generated; 2: alarm is generated. | |||||||||||||
| ChwGponDeviceOntAlarmDOWi | 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the the ONU DOWi alarm. 1: no alarm is generated; 2: alarm is generated. | |||||||||||||
| ChwGponDeviceOntAlarmLOSi | 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the loss of frame (LOSi) alarm. 1: no alarm is generated; 2: alarm is generated. | |||||||||||||
| ChwGponDeviceOntObjAlarmStateRDIi | 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the remote defect indication (RDIi) alarm 1: no alarm is generated; 2: alarm is generated. | |||||||||||||
| ThwGponDeviceOntOpticalDdmInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.51 | NA | |||||||||||
table · not-accessible · current The table is used to query the information of the ONT Optical module. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponDeviceOntOpticalDdmInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.51.1 | NA | |||||||||||
row · not-accessible · current The table is used to query the information of the ONT Optical module. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponOntOpticalDdmTemperature | 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The temperature of the optical module, unit C(centigrade). | |||||||||||||
| ChwGponOntOpticalDdmBiasCurrent | 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The Bias Current of the optical module, unit mA. | |||||||||||||
| ChwGponOntOpticalDdmTxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The transmitting power of the optical module, unit 0.01dBm. | |||||||||||||
| ChwGponOntOpticalDdmRxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The receiving power of the optical module, unit 0.01dBm. | |||||||||||||
| ChwGponOntOpticalDdmVoltage | 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The power feed voltage of the optical module, unit mV. | |||||||||||||
| ChwGponOntOpticalDdmOltRxOntPower | 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The ONT optical power received on the OLT, unit dBm. The relationship between the actual value and the value get from this leaf node is as follows, Actual value = ((Node value - 10000) / 100) | |||||||||||||
| ChwGponOntOpticalDdmAniCATVRxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates the CATV receiving optical power of the optical module, unit 0.01dBm. | |||||||||||||
| ThwGponDeviceOntRegisterInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.52 | NA | |||||||||||
table · not-accessible · current This table is used to query the register information about the ONT, including the ONT SN, register time and register result. The index of this table is a combination of ifIndex and hwGponDeviceOntRegisterSerialNum. | |||||||||||||
| RhwGponDeviceOntRegisterInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the register information about the ONT, including the ONT SN, register time and register result. The index of this entry is a combination of ifIndex and hwGponDeviceOntRegisterSerialNum. | |||||||||||||
| ChwGponDeviceOntRegisterSerialNum | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the register number. | |||||||||||||
| ChwGponDeviceOntRegisterSn | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.2 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the ONT serial number. | |||||||||||||
| ChwGponDeviceOntRegisterResult | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the register result. Options: 1. success(1) - Indicates that the register result is success 2. fail(2) - Indicates that the register result is fail 3. snConflict(3) - Indicates that the SN conflict 4. passwordConflict(4) - Indicates that the password conflict 5. loidConflict(5) - Indicates that the LOID conflict 6. passwordError(6) - Indicates that the password conflict 7. ccError(7) - Indicates that the CC error 8. rangingOnuFail(8) - Indicates that the ranging ONU fail 9. unconfirmed(9) - Indicates that the ONU is unconfirmed 10. misMatch(10) - Indicates that the ONU is mismatch 11. loidError(11) - Indicates that the LOID error 12. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntRegisterTime | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.4 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the register time. -1 is the invalid value. | |||||||||||||
| ChwGponDeviceOntRegisterConflictedIfindex | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ifIndex of the conflicted ONT. -1 is the invalid value. | |||||||||||||
| ChwGponDeviceOntRegisterConflictedOntIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the index of the conflicted ONT. -1 is the invalid value. | |||||||||||||
| ChwGponDeviceOntRegisterOntPassword | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.7 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the ONT password GPON password size (0..10) XG-PON password size (0..36) | |||||||||||||
| ChwGponDeviceOntRegisterOntVendorId | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT vendor ID. | |||||||||||||
| ChwGponDeviceOntRegisterOntVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.9 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the ONT version. | |||||||||||||
| ChwGponDeviceOntRegisterOntMainSoftVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.10 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the ONT mainsoft version. | |||||||||||||
| ChwGponDeviceOntRegisterOntEquipmentId | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.11 | OCTET STRING (SIZE (20)) | RO | ||||||||||
column · OCTET STRING (SIZE (20)) · read-only · current This object indicates the ONT equipment ID. | |||||||||||||
| ChwGponDeviceOntRegisterOntLoid | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.12 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT LOID. | |||||||||||||
| ChwGponDeviceOntRegisterOntCheckcode | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.13 | OCTET STRING (SIZE (0..12)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-only · current This object indicates the ONT CHECKCODE | |||||||||||||
| ChwGponDeviceOntRegisterOntNniType | 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT actual rate type. Options: 1. rate2dot5G1dot25G(1) - Downstream rate 2.5Gbps, upstream rate 1.25Gbps 2. rate10G2dot5G(2) - Downstream rate 10Gbps, upstream rate 2.5Gbps 3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponDeviceOntConfigInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.53 | NA | |||||||||||
table · not-accessible · current This table is used to create, modify, delete or query an ONT. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponDeviceOntConfigInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1 | NA | |||||||||||
row · not-accessible · current This table is used to create, modify, delete or query an ONT. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponDeviceOntIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT ID, range: 0~254. | |||||||||||||
| ChwEponDeviceOntAuthMode | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the authentication mode for the ONT. Options: 1. onceon(1) - The authentication mode is once on 2. alwayson(2) - The authentication mode is always on 3. mac(3) - The authentication mode is MAC 4. lOIDonceon(5) - The authentication mode is LOID and once on 5. lOIDalwayson(6) - The authentication mode is LOID and always on 6. lOIDCheckCodeOnceon(7) - The authentication mode is LOID, checkcode and once on 7. lOIDCheckCodeAlwayson(8) - The authentication mode is LOID, checkcode and once always on 8. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntMacAddress | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.3 | MacAddress | RW | ||||||||||
column · MacAddress · read-write · current This object indicates the ONT MAC. | |||||||||||||
| ChwEponDeviceOntPassword | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.4 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the ONT password. | |||||||||||||
| ChwEponDeviceOntTimeout | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the registered working period of the ONT, ranging from 1 to 168 hours. The value (-1) indicates that there is no-aging time. | |||||||||||||
| ChwEponDeviceOntManagementMode | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the ONT management mode, including OAM and SNMP. Options: 1. oam(1) - OAM 2. snmp(2) - SNMP 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntLineProfName | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.7 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the line profile that is bound to the ONT. | |||||||||||||
| ChwEponDeviceOntServiceProfName | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.8 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the service profile that is bound to the ONT. | |||||||||||||
| ChwEponDeviceOntDespt | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.9 | OCTET STRING (SIZE (1..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (1..64)) · read-write · current This object indicates the description of the ONT. | |||||||||||||
| ChwEponDeviceOntEntryStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwEponDeviceOntProtectSide | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the ONT is the ONT on the protection side. Options: 1. protectside(1) - Indicates that the ONT is the ONT on the protection side 2. work(2) - Indicates that the ONT is the ONT on the work side
| |||||||||||||
| ChwEponDeviceOntObjectLoid | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.12 | OCTET STRING (SIZE (0..24)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-write · current This object indicates the ONT LOID. | |||||||||||||
| ChwEponDeviceOntObjectCheckcode | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.13 | OCTET STRING (SIZE (0..12)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-write · current This object indicates the ONT CHECKCODE. | |||||||||||||
| ChwEponDeviceLineProfileServiceSlaProfileIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.14 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the index of SLA profile | |||||||||||||
| ChwEponDeviceOntPGMemberRole | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicate the role of the ont in the protect group, Options: 1. work(1) - Indicates that the role of the ONT is work 2. protect(2) - Indicates that the role of the ONT is protection 3. unjoined(-1) - Indicates that the ONT is not added to the protect group
| |||||||||||||
| ChwEponDeviceOntAuthEffectMode | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates the effect taking mode after the ONT authentication mode is changed. The default effect taking mode is immediate. Options: 1. immediate (1) -Indicates that the change will take effect immediately. 2. nextstartup (2) -Indicates that the change will take effect when the ONT goes online next time. 3. invalid (-1) -Indicates that the effect taking mode is invalid.
| |||||||||||||
| ChwEponDeviceOntNniType | 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.17 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the ONT rate type. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps 3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps 4. auto(4) - Indicates that the ONT NNI type is automatically selected 5. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps 6. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponDeviceOntExtendConfigTable | 1.3.6.1.4.1.2011.6.128.1.1.2.54 | NA | |||||||||||
table · not-accessible · current This is the ONT extend function configuration table. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponDeviceOntExtendConfigEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.54.1 | NA | |||||||||||
row · not-accessible · current This is the ONT extend function configuration table. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponDeviceOntCfgSnmpProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.1 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the ONT SNMP profile. | |||||||||||||
| ChwEponDeviceOntCfgMulticastMode | 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile multicast mode. Options: 1. ctc(1) - Indicates that the XPON service profile multicast mode is CTC 2. igmpsnooping(2) - Indicates that the XPON service profile multicast mode is igmp snooping 3. transparent(3) - Indicates that the XPON service profile multicast mode is transparent 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntExtCfgOpticAlarmProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.3 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the optical alarm profile that is bound to the ONT. | |||||||||||||
| ChwEponDeviceOntExtCfgAlarmProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.4 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the alarm profile that is bound to the ONT PON port. | |||||||||||||
| ChwEponDeviceOntExtCfgWarningProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.5 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the warning profile that is bound to the ONT PON port. | |||||||||||||
| ThwEponDeviceOntVersionInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.55 | NA | |||||||||||
table · not-accessible · current This is the ONT version information table. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponDeviceOntVersionInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1 | NA | |||||||||||
row · not-accessible · current This is the ONT version information table. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponDeviceOntVendorId | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT VendorID. | |||||||||||||
| ChwEponDeviceOntModel | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT model. | |||||||||||||
| ChwEponDeviceOntOntIdentifier | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.3 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the ONT identifier. | |||||||||||||
| ChwEponDeviceOntHardwareVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.4 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the hardware version of the ONT. | |||||||||||||
| ChwEponDeviceOntSoftwareVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.5 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the software version of the ONT. | |||||||||||||
| ChwEponDeviceOntChipVendorID | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.6 | OCTET STRING (SIZE (2)) | RO | ||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current This object indicates the verder ID of the ONT's chip. | |||||||||||||
| ChwEponDeviceOntChipModel | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the model of the ONT's chip. | |||||||||||||
| ChwEponDeviceOntChipVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the verion of the ONT's chip. | |||||||||||||
| ChwEponDeviceOntChipDesignDate | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.9 | OCTET STRING (SIZE (3)) | RO | ||||||||||
column · OCTET STRING (SIZE (3)) · read-only · current This object indicates the design data of the ONT's chip. | |||||||||||||
| ChwEponDeviceOntFirmwareVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the firmware version of the ONT's chip. | |||||||||||||
| ChwEponDeviceOntChipRevision | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the firmware reversion of the ONT's chip. | |||||||||||||
| ChwEponDeviceOntSoftwareWorkMode | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object indicates the software working mode of the EPON ONT. Options: 1. normal(1) - Normal 2. survivalmode(2) - Survival mode
| |||||||||||||
| ChwEponDeviceOntExtendedModel | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.13 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the ONT extended model. | |||||||||||||
| ChwEponDeviceOntOuiVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.14 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the highest version of ONT OUI. | |||||||||||||
| ChwEponDeviceOntExtendedFirmwareVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.15 | Opaque (SIZE (0..128)) | RO | ||||||||||
column · Opaque (SIZE (0..128)) · read-only · current This object indicates the extended firmware version of the ONT's chip. | |||||||||||||
| ChwEponDeviceOntCustomizedInfo | 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.16 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT customize information. | |||||||||||||
| ThwEponDeviceOntCfgCapabilityTable | 1.3.6.1.4.1.2011.6.128.1.1.2.56 | NA | |||||||||||
table · not-accessible · current The EPON ONT configuration capability table. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponDeviceOntCfgCapabilityEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.56.1 | NA | |||||||||||
row · not-accessible · current The EPON ONT configuration capability table. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponDeviceOntCfgCapManageMode | 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT's management mode, including oam and snmp. Options: 1. oam(1) - OAM 2. snmp(2) - SNMP 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntCfgCapPotsNum | 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of POTS ports. A special value of 0xFE (254) indicates the number of port is adaptive. | |||||||||||||
| ChwEponDeviceOntCfgCapIPSupport | 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the IP config mode. Options: 1. dhcp(1) - DHCP 2. static(2) - Indicates that the IP config mode is static 3. unconfiguration(3) - Indicates that the IP is not configuration 4. pppoe(4) - Indicates that the IP config mode is PPPoE 5. invalid (-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntCfgCapTdmPortType | 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the TDM port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntCfgCapTdmNum | 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of TDM ports. | |||||||||||||
| ChwEponDeviceOntCfgCapEthNum | 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number ethernet ports. A special value of 0xFE (254) indicates the number of port is adaptive. | |||||||||||||
| ThwEponDeviceOntControlInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.57 | NA | |||||||||||
table · not-accessible · current This is the control table of the ONT. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponDeviceOntControlInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1 | NA | |||||||||||
row · not-accessible · current This is the control table of the ONT. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponDeviceOntActive | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to activate or deactivate an ONT. Options: 1. activate(1) - Activates an ONT 2. deactivate(2) - Deactivates an ONT 3. invalid (-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntReset | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to reset an ONT. Options: 1. reset(1) - Reset an ONT 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntReRegister | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to re-register an ONT. Options: 1. reRegister(1) - Re-register an ONT 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntReDiscovery | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to reset the discovery status of an ONT. If the authentication mode is once-on(4), after performing the rediscovery operation, the registered working period is re-timed. Options: 1. rediscovery(1) - Reset the discovery status of an ONT 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntPing | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT ping. | |||||||||||||
| ChwEponDeviceOntRunStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT running status. Options: 1. up(1) - Normal 2. down(2) - Fault 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntConfigStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This is the ONT configuration resume status. If it is failed(3), the ONT is down and the service is interrupted. If the config status is noresume (4), set the resume policy as resume for the system and re-register the ONT. Options: 1. initialization(1) - Indicates that the ONT configuration resume status is initialization 2. normal(2) - Indicates that the ONT configuration resume status is normal 3. failed(3) - Indicates that the ONT configuration resume status is failed 4. noresume(4) - Indicates that the ONT configuration resume status is not resumed 5. config(5) - Indicates that the ONT configuration resume status is configuration 6. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntDiscoveryState | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT discovery state. Options: 1. on(1) - Indicates that the ONT discovery state is on 2. off(2) - Indicates that the ONT discovery state is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntMatchStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT match status. Options: 1. initialization(1) - Indicates that the ONT is initialization 2. match(2) - Indicates that the ONT is matched 3. mismatch(3) - Indicates that the ONT is mismatched 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntDistance | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.19 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the result of the ONT ranging. | |||||||||||||
| ChwEponDeviceOntRtt | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.20 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the result of the ONT ranging(RTT). | |||||||||||||
| ChwEponDeviceOntUpStreamBW | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.21 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the upstream bandwidth of the ONT. | |||||||||||||
| ChwEponDeviceOntDownStreamBW | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.22 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the downstream bandwidth of the ONT. | |||||||||||||
| ChwEponDeviceOntLastUpTime | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.23 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the ONT last goes online. | |||||||||||||
| ChwEponDeviceOntLastDownTime | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.24 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the ONT last goes offline. | |||||||||||||
| ChwEponDeviceOntLastDownCause | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.25 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the reason why the ONT last went offline. The value (1) indicates that the reason is LOS(Loss of signal), The value (2) indicates that the reason is LOSI(Loss of signal for ONUi), The value (3) indicates that the reason is LOFI(Loss of frame of ONUi), The value (4) indicates that the reason is SFI(Signal fail of ONUi), The value (5) indicates that the reason is LOAI(Loss of acknowledge with ONUi), The value (6) indicates that the reason is LOAMI(Loss of PLOAM for ONUi), The value (7) indicates that the reason is deactive ONT fails, The value (8) indicates that the reason is deactive ONT success, The value (9) indicates that the reason is reset ONT, The value (10) indicates that the reason is re-register ONT, The value (11) indicates that the reason is pop up fail, The value (12) indicates that the reason is authentication fail, The value (13) indicates that the reason is dying-gasp, The value (14) reserved, The value (15) indicates that the reason is LOKI(Loss of key synch with ONUi), The value (18) indicates that the reason is deactived ONT due to the ring, The value (30) indicates that the reason is shut down ONT optical module, The value (31) indicates that the reason is reset ONT by ONT command, The value (32) indicates that the reason is reset ONT by ONT reset button, The value (33) indicates that the reason is reset ONT by ONT software, The value (34) indicates that the reason is deactived ONT due to broadcast attack, The value (37) indicates that the reason is a rogue ONT detected by itself, The value (-1) indicates that the query fails. | |||||||||||||
| ChwEponDeviceOntLastDyingGaspTime | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.26 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time when the ONT last goes down due to Dying Gasp. | |||||||||||||
| ChwEponDeviceOntIsolationStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.27 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT isolation status. Options: 1. normal(0) - Indicates that the ONT is normal 2. isolated(1) - Indicates that the ONT is isolated
| |||||||||||||
| ChwEponDeviceOntActualNniType | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.28 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT actual rate type. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps 3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps 4. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntLastActualNniType | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.29 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT last actual rate type. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps 3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps 4. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntLastDistance | 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.30 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the result of the ONT last ranging. | |||||||||||||
| ThwEponDeviceAutoFindOntInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.58 | NA | |||||||||||
table · not-accessible · current The table is used to query ONT(s) that are found automatically. The index of this table is a combination of ifIndex and hwEponDeviceAutoFindOntInfoOntIndex. | |||||||||||||
| RhwEponDeviceAutoFindOntInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1 | NA | |||||||||||
row · not-accessible · current The table is used to query ONT(s) that are found automatically. The index of this entry is a combination of ifIndex and hwEponDeviceAutoFindOntInfoOntIndex. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoOntIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the auto find ONT index, range: 0~254. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoMacAddress | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.2 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current This object indicates the MAC address of ONT. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoPasswordValue | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.3 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the password of ONT. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoVendorId | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Vendor identifier of ONT. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoSoftwareVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.5 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the Software version of ONT. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoHardwareVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.6 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the hardware version of ONT. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoAutoFindTime | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.7 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the time for ONT's auto find. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoOntModel | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Mode of ONT. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoLoid | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.9 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT LOID. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoCheckcode | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.10 | OCTET STRING (SIZE (0..12)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-only · current This object indicates the ONT CHECKCODE. | |||||||||||||
| ChwEponDeviceAutoFindOntNniType | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT actual rate type. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps 3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps 4. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceAutoFindOntInfoOntExtendedModel | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.12 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current This object indicates the ONT extended model. | |||||||||||||
| ChwEponDeviceAutoFindOntInfoOuiVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.13 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current This object indicates the highest ONT OUI version | |||||||||||||
| ChwEponDeviceAutoFindOntInfoCustomizedInfo | 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.14 | OCTET STRING (SIZE (1..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..24)) · read-only · current This object indicates the ONT customize information. | |||||||||||||
| ThwEponDeviceOntCapabilityInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.59 | NA | |||||||||||
table · not-accessible · current This table is used to query the ONT capability set. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponDeviceOntCapabilityInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the ONT capability set. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponDeviceOntPOTSPortNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of POTS ports. | |||||||||||||
| ChwEponDeviceOntFEPortsNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of FE ports. | |||||||||||||
| ChwEponDeviceOntGEPortsNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of GE ports. | |||||||||||||
| ChwEponDeviceOntTDMPortsNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of TDM ports. | |||||||||||||
| ChwEponDeviceOntFECSupport | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates whether the ONT supports the FEC. The value (1) indicates that the ONT supports the FEC. The value (2) indicates that the ONT not supports the FEC. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwEponDeviceOntSupportbackupbattery | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates whether the ONT supports the standby battery. | |||||||||||||
| ChwEponDeviceOntUpQueueAllocationIncre | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the increment of the allocated bandwidth of the upstream queue. | |||||||||||||
| ChwEponDeviceOntUpQueueNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of upstream queues. | |||||||||||||
| ChwEponDeviceOntUpQueueNumPerPort | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the maximum number of queues of the upsstream port. | |||||||||||||
| ChwEponDeviceOntDownQueueNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of downstream queues. | |||||||||||||
| ChwEponDeviceOntDownQueueNumPerPort | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the maximum number of queues of the downstream port. | |||||||||||||
| ChwEponDeviceOntFePortList | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.12 | PortList (SIZE (200)) | RO | ||||||||||
column · PortList (SIZE (200)) · read-only · current This object indicates the bitmap of the FE port. | |||||||||||||
| ChwEponDeviceOntGePortList | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.13 | PortList (SIZE (200)) | RO | ||||||||||
column · PortList (SIZE (200)) · read-only · current This object indicates the bitmap of the GE port. | |||||||||||||
| ChwEponDeviceOntSupportMulticastQuickLeave | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the multicast quick leave capability. | |||||||||||||
| ChwEponDeviceOntDeviceType | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT device type. Options: 1. sfu(0) - SFU 2. hgu(1) - HGU 3. sbu(2) - SBU 4. boxShapedMDU(3) - Box shaped MDU 5. smallCapacityCardTypeMDU(4) - Small capacity card type MDU 6. boxShapedCardTypeMDU(5) - Box shaped card type MDU 7. rackCardTypeMDU(6) - Rack card type MDU 8. cardTypeMDU(7) - Card type MDU 9. mtu(8) - MTU 10. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntMultiLLID | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.16 | Integer32 (-1 | 0..255) | RO | ||||||||||
column · Integer32 (-1 | 0..255) · read-only · current This object indicates the ONT device multiLLID. -1 indicates an invalid value. A value from 1 to 255 indicates the number of supported LLIDs. In CTC Technical Specification for EPON Equipment V2.1_200904, 0 indicates that multiple LLIDs are supported. In CTC Technical Specification for EPON Equipment V2.1_200912, 0 indicates an invalid value. | |||||||||||||
| ChwEponDeviceOntProtectionType | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT protection type. Options: 1. unsupport(0) - Do not support the ONT protection 2. typecProtection(1) - Type C protection 3. typedProtection(2) - Type D protection 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntPonIFNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.18 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT device ponIF number. | |||||||||||||
| ChwEponDeviceOntSlotNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.19 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT device slot number. | |||||||||||||
| ChwEponDeviceOntADSL2plusNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.20 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT device ADSL2 + port number | |||||||||||||
| ChwEponDeviceOntVDSL2Num | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.21 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT device VDSL2 port number. | |||||||||||||
| ChwEponDeviceOntWLANNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.22 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT device WLAN port number. | |||||||||||||
| ChwEponDeviceOntUSBNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.23 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT device USB port number. | |||||||||||||
| ChwEponDeviceOntCATVNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.24 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT device CATV port number. | |||||||||||||
| ChwEponDeviceOntSupportIPv6Aware | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.25 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates whether the ONT supports IPv6 aware. Options: 1.unsupport(1) - Indicates that the ONT does not support IPv6 aware. 2.support(2) - Indicates that the ONT supports IPv6 aware. 3.invalid(-1) - Indicates that the query fails or no information is detected.
| |||||||||||||
| ChwEponDeviceOntSupportPowerSupplyControl | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates whether the ONT supports power supply control. Options: 1. unsupport(1) - Indicates that the ONT does not support power supply control. 2. supportTx(2) - Indicates that the ONT only supports Tx power supply control. 3. supportTxAndRx(3) - Indicates that the ONT supports both Tx power and Rx power supply control. 4. invalid(-1) - Indicates that the query fails or no information is detected.
| |||||||||||||
| ChwEponDeviceOntSupportServiceSLA | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.27 | Integer32 (-1 | 1..8) | RO | ||||||||||
column · Integer32 (-1 | 1..8) · read-only · current This object indicates whether the ONT supports service SLA. The value (1) indicates that the ONT does not support service SLA. The value (2-8) indicates the number of the ONT supports service SLA. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwEponDeviceOnt10GEPortsNum | 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.28 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of 10GE ports. | |||||||||||||
| ThwEponDeviceOntIpConfigInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.60 | NA | |||||||||||
table · not-accessible · current This is the ONT IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponDeviceOntIpConfigInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.60.1 | NA | |||||||||||
row · not-accessible · current This is the ONT IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponDeviceOntIpConfigVlan | 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the management VLAN. | |||||||||||||
| ChwEponDeviceOntIpAddress | 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the IP address. | |||||||||||||
| ChwEponDeviceOntNetMask | 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the subnet mask of the IP address. | |||||||||||||
| ChwEponDeviceOntNetGateway | 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the default network gateway. | |||||||||||||
| ChwEponDeviceOntIpConfigRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwEponDeviceOntIpConfigRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwEponDeviceOntIpConfigPriority | 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the management priority of MDU. | |||||||||||||
| ThwEponDeviceOntRegInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.61 | NA | |||||||||||
table · not-accessible · current This table is used to query the register information about the ONT, including the ONT MAC, register time and register result. The index of this table is a combination of ifIndex and hwEponDeviceSerialNum. | |||||||||||||
| RhwEponDeviceOntRegInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the register information about the ONT, including the ONT MAC, register time and register result. The index of this entry is a combination of ifIndex and hwEponDeviceSerialNum.
| |||||||||||||
| ChwEponDeviceSerialNum | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the register number. | |||||||||||||
| ChwEponDeviceRegOntMac | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.2 | OCTET STRING (SIZE (6)) | RO | ||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current This object indicates the ONT MAC. | |||||||||||||
| ChwEponDeviceRegOntResult | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the register result. Options: 1. success(1) - Indicates that the register result is success 2. fail(2) - Indicates that the register result is fail 3. macConflict(3) - Indicates that the MAC conflict 4. passwordConflict(4) - Indicates that the password conflict 5. loidConflict(5) - Indicates that the LOID conflict 6. passwordError(6) - Indicates that the password conflict 7. ccError(7) - Indicates that the CC error 8. rangingOnuFail(8) - Indicates that the ranging ONU fail 9. unconfirmed(9) - Indicates that the ONU is unconfirmed 10. misMatch(10) - Indicates that the ONU is mismatch 11. loidError(11) - Indicates that the LOID error 12. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceRegOntTime | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.4 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object indicates the register time. -1 is the invalid value. | |||||||||||||
| ChwEponDeviceRegConflictedIfindex | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ifIndex of the conflicted ONT. -1 is the invalid value. | |||||||||||||
| ChwEponDeviceRegConflictedOntIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the index of the conflicted ONT. -1 is the invalid value. | |||||||||||||
| ChwEponDeviceRegOntPasswordValue | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.7 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the ONT password. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. | |||||||||||||
| ChwEponDeviceRegOntVendorId | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT vendor ID. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. | |||||||||||||
| ChwEponDeviceRegOntSoftwareVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.9 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the Software version of ONT. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. | |||||||||||||
| ChwEponDeviceRegOntHardwareVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.10 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the hardware version of ONT. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. | |||||||||||||
| ChwEponDeviceRegOntModel | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Mode of ONT. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. | |||||||||||||
| ChwEponDeviceRegOntLoid | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.12 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT LOID. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. | |||||||||||||
| ChwEponDeviceRegOntCheckcode | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.13 | OCTET STRING (SIZE (0..12)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-only · current This object indicates the ONT CHECKCODE. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. | |||||||||||||
| ChwEponDeviceRegOntRateType | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT actual rate type. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps 3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps 4. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceRegOntExtendedModel | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.15 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the ONT extended model. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. | |||||||||||||
| ChwEponDeviceRegOntOuiVersion | 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.16 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the highest ONT OUI version. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. | |||||||||||||
| ThwGponDeviceOntEthernetPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.2.62 | NA | |||||||||||
table · not-accessible · current This is the ONT ETH port table, This table is used to set or query the attribute of the ONT ETH port, including duplex, transmission rate and native VLAN and others. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntEthernetPortId. When the attribute of an ONT ETH port is queried on the NMS, if the port is bound with hwGponDeviceOntEthernetOnlineState, the running states of the port is queried. If the port is not bound with hwGponDeviceOntEthernetOnlineState, the configuration of the port is queried. | |||||||||||||
| RhwGponDeviceOntEthernetPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1 | NA | |||||||||||
row · not-accessible · current This is the ONT ETH port table, This table is used to set or query the attribute of the ONT ETH port, including duplex, transmission rate and native VLAN and others. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntEthernetPortId. When the attribute of an ONT ETH port is queried on the NMS, if the port is bound with hwGponDeviceOntEthernetOnlineState, the running states of the port is queried. If the port is not bound with hwGponDeviceOntEthernetOnlineState, the configuration of the port is queried. | |||||||||||||
| ChwGponDeviceOntEthernetPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT ETH port ID. | |||||||||||||
| ChwGponDeviceOntEthernetNegotiate | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the negotiation switch. The value (1) indicates that the negotiation switch is on. The value (2) indicates that the negotiation switch is off. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntEthernetDuplexMode | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the duplex type of the port. Options: 1. half(1) - Forced half duplex 2. full(2) - Forced full duplex 3. autoneg(3) - Auto negotiation 4. autohalf(4) - Auto half duplex 5. autofull(5) - Auto full duplex 6. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetSpeed | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the transmission rate of the port. Options: 1. speed10M(1) - The forced transmission rate of the port is 10M 2. speed100M(2) - The forced transmission rate of the port is 100M 3. speed1000M(3) - The forced transmission rate of the port is 1000M 4. autoneg(4) - The transmission rate of the port is auto negotiation 5. autospeed10M(5) - The auto transmission rate of the port is 10M 6. autospeed100M(6) - The auto transmission rate of the port is 100M 7. autospeed1000M(7) - The auto transmission rate of the port is 1000M 8. speed10G(8) - The forced transmission rate of the port is 10G 9. autospeed10G(9) - The auto transmission rate of the port is 10G 10. speed2500M(10) - The forced transmission rate of the port is 2500M 11. autospeed2500M(11) - The auto transmission rate of the port is 2500M 12. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetOperateStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of the port. Options: 1. on(1) - Indicates that the switch of the port is on 2. off(2) - Indicates that the switch of the port is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetFlowCtrlSwitch | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to set the flow control switch of ONT port. Options: 1. on(1) - Indicates that the flow control switch of ONT port is on 2. off(2) - Indicates that the flow control switch of ONT port is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetVlanDefault | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the native VLAN of the port. | |||||||||||||
| ChwGponDeviceOntEthernetVlanDefaultPriority | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the native VLAN priority of the port. | |||||||||||||
| ChwGponDeviceOntEthernetActualPortType | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.21 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the actual ETH port type of the ONT. The value (13) indicates that the port type is t1, The value (14) indicates that the port type is e1, The value (24) indicates that the port type is fe, The value (34) indicates that the port type is ge, The value (46) indicates that the port type is moca, The value (47) indicates that the port type is eth, The value (50) indicates that the port type is iphost, The value (-1) indicates that the query fails. | |||||||||||||
| ChwGponDeviceOntEthernetOnlineState | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.22 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the status of ONT ETH port. Options: 1. linkup(1) - Indicates that the status of ONT ETH port is link up 2. linkdown(2) - Indicates that the status of ONT ETH port is link down 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetUpStreamCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.23 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ONT ethernet port upstream car profile id (1~1024, 0xfffe-unconcern). | |||||||||||||
| ChwGponDeviceOntEthernetDownStreamCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.24 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ONT ethernet port downstream car profile id (1~1024, 0xfffe-unconcern). | |||||||||||||
| ChwGponDeviceOntEthernetPortIgmpForwardMode | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.25 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The object is used to enable or disable the switch of ONT port IGMP forward mode. Options: 1. disable(1) - Disable the switch of ONT port IGMP forward mode 2. enable(2) - Enable the switch of ONT port IGMP forward mode 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetPortRingStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object is used to enable or disable the switch of ONT port IGMP forward mode. Options: 1. loop(1) - Indicates that the ring status of ONT ETH port is loop 2. noloop(2) - Indicates that the ring status of ONT ETH port is no loop 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetUpStreamCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.27 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the ONT ethernet port upstream car profile name. | |||||||||||||
| ChwGponDeviceOntEthernetDownStreamCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.28 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the ONT ethernet port downstream car profile name. | |||||||||||||
| ChwGponDeviceOntEthernetRouteSwitch | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.29 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the actual route switch status of ONT ETH port. Options: 1. enable(1) - Indicates that the route switch status of ONT ETH port is enable 2. disable(2) - Indicates that the route switch status of ONT ETH port is disable 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetMode | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.30 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the optical module status of the ONT ethernet port. Options: 1. electric(1) - Indicates that the mode status of ONT ETH port is electric 2. optic(2) - Indicates that the mode status of ONT ETH port is optic 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetOpticalModuleStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.31 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the ONT ethernet port. Options: 1. normal(1) - Indicates that the optical module status of ONT ETH port is normal 2. absence(2) - Indicates that the optical module status of ONT ETH port is absence 3. mismatch(3) - Indicates that the optical module status of ONT ETH port is mismatch 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntEthernetOnlineDuration | 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.32 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Indicates the online duration of the ONT ethernet port. Unit: second
| |||||||||||||
| ThwGponDeviceOntCatvPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.2.63 | NA | |||||||||||
table · not-accessible · current This is the ONT CATV port table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntCatvPortId. | |||||||||||||
| RhwGponDeviceOntCatvPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.63.1 | NA | |||||||||||
row · not-accessible · current This is the ONT CATV port table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntCatvPortId. | |||||||||||||
| ChwGponDeviceOntCatvPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT CATV port ID. | |||||||||||||
| ChwGponDeviceOntCatvOperateStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the laser switch of ONT CATV port. Options: 1. on(1) - Indicates that the laser switch of ONT CATV port is on 2. off(2) - Indicates that the laser switch of ONT CATV port is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntCatvOnlineStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the link status of ONT CATV port. The value (1) indicates that the CATV port is online. The value (2) indicates that the CATV port is offline. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntCatvFrequency | 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the frequency of ONT CATV port. Options: 1. allPass(1) - Indicates that the frequency of ONT CATV port is all-pass 2. highPass(2) - Indicates that the frequency of ONT CATV port is high-pass 3. lowPass(3) - Indicates that the frequency of ONT CATV port is low-pass 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntCatvTxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Tx power of ONT CATV port. Unit: 0.001dBmV Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponDeviceOntMocaPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.2.64 | NA | |||||||||||
table · not-accessible · current This is the ONT MOCA port config table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntMocaPortId. | |||||||||||||
| RhwGponDeviceOntMocaPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.64.1 | NA | |||||||||||
row · not-accessible · current This is the ONT MOCA port config table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntMocaPortId. | |||||||||||||
| ChwGponDeviceOntMocaPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.64.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT MOCA port ID. | |||||||||||||
| ChwGponDeviceOntMocaPortVlanDefault | 1.3.6.1.4.1.2011.6.128.1.1.2.64.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the native VLAN of the Moca port. | |||||||||||||
| ChwGponDeviceOntMocaPortVlanDefaultPri | 1.3.6.1.4.1.2011.6.128.1.1.2.64.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the native VLAN priority of the MOCA port. The range is from 0 to 7, and the value (-1) is invalid. | |||||||||||||
| ThwGponDeviceOntIpHostPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.2.65 | NA | |||||||||||
table · not-accessible · current This is the ONT IPHOST port config table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntIpHostPortId. | |||||||||||||
| RhwGponDeviceOntIpHostPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.65.1 | NA | |||||||||||
row · not-accessible · current This is the ONT IPHOST port config table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntIpHostPortId. | |||||||||||||
| ChwGponDeviceOntIpHostPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.65.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT IPHOST port ID. | |||||||||||||
| ChwGponDeviceOntIpHostPortVlanDefault | 1.3.6.1.4.1.2011.6.128.1.1.2.65.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the native VLAN of the IPHOST port. | |||||||||||||
| ChwGponDeviceOntIpHostPortVlanDefaultPri | 1.3.6.1.4.1.2011.6.128.1.1.2.65.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the native VLAN priority of the IPHOST port. The range is from 0 to 7, and the value (-1) is invalid. | |||||||||||||
| ThwEponDeviceOntEthernetPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.2.81 | NA | |||||||||||
table · not-accessible · current This is the ONT ETH port config table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. | |||||||||||||
| RhwEponDeviceOntEthernetPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1 | NA | |||||||||||
row · not-accessible · current This is the ONT ETH port config table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. | |||||||||||||
| ChwEponDeviceOntEthernetPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT ETH port ID. | |||||||||||||
| ChwEponDeviceOntEthernetNegotiate | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the negotiation switch. Options: 1. auto(1) - Indicates that the negotiation switch is auto negotiation 2. neg(2) - Indicates that the negotiation switch is negotiation 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntEthernetDuplexMode | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the duplex type of the port. Options: 1. half(1) - Forced half duplex 2. full(2) - Forced full duplex 3. autoneg(3) - Auto negotiation 4. autohalf(4) - Auto half duplex 5. autofull(5) - Auto full duplex 6. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntEthernetSpeed | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the transmission rate of the port. Options: 1. speed10M(10) - The forced transmission rate of the port is 10M 2. speed100M(100) - The forced transmission rate of the port is 100M 3. speed1000M(1000) - The forced transmission rate of the port is 1000M 4. autoneg(4) - The transmission rate of the port is auto negotiation 5. autospeed10M(5) - The auto transmission rate of the port is 10M 6. autospeed100M(6) - The auto transmission rate of the port is 100M 7. autospeed1000M(7) - The auto transmission rate of the port is 1000M 8. speed10G(8) - The forced transmission rate of the port is 10G 9. autospeed10G(9) - The auto transmission rate of the port is 10G 10. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntEthernetVlanDefault | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the native VLAN of the port. | |||||||||||||
| ChwEponDeviceOntEthernetOperateStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of the port. Options: 1. on(1) - Indicates that the switch of the port is on 2. off(2) - Indicates that the switch of the port is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntEthernetFlowcontrolSwitch | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to set ONT port flow control switch. Options: 1. on(1) - Indicates that the switch of ONT port flow control is on 2. off(2) - Indicates that the switch of ONT port flow control is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntEthernetRingStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ring status of ONT ETH port. Options: 1. forward(1) - Indicates that the ring status of ONT ETH port is forward 2. block(2) - Indicates that the ring status of ONT ETH port is block 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntEthernetOnlineState | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.31 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the status of ONT ETH port. Options: 1. linkup(1) - Indicates that the status of ONT ETH port is link up 2. linkdown(2) - Indicates that the status of ONT ETH port is link down 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntEthernetPortCfgUpStreamCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.32 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ONT port upstream car profile id (1~1024, 0xfffe-unconcern). | |||||||||||||
| ChwEponDeviceOntEthernetPortCfgDownStreamCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.33 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ONT port downstream car profile id (1~1024, 0xfffe-unconcern). | |||||||||||||
| ChwEponDeviceOntEthernetPortCfgUpStreamCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.34 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the ONT port upstream car profile name. | |||||||||||||
| ChwEponDeviceOntEthernetPortCfgDownStreamCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.35 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the ONT port downstream car profile name. | |||||||||||||
| ThwEponDeviceOntTDMPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.2.82 | NA | |||||||||||
table · not-accessible · current The ONT TDM port config table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntTDMPortId. | |||||||||||||
| RhwEponDeviceOntTDMPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.82.1 | NA | |||||||||||
row · not-accessible · current The ONT TDM port config table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntTDMPortId. | |||||||||||||
| ChwEponDeviceOntTDMPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.82.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT TDM port ID. | |||||||||||||
| ChwEponDeviceOntTDMPortOperateStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.82.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of the port. Options: 1. on(1) - Indicates that the switch of the port is on 2. off(2) - Indicates that the switch of the port is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponDeviceOntPOTSPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.2.83 | NA | |||||||||||
table · not-accessible · current The ONT POTS port config table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntPOTSPortId. | |||||||||||||
| RhwEponDeviceOntPOTSPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.83.1 | NA | |||||||||||
row · not-accessible · current The ONT POTS port config table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntPOTSPortId. | |||||||||||||
| ChwEponDeviceOntPOTSPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.83.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT POTS port ID. | |||||||||||||
| ChwEponDeviceOntPOTSPortOperateStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.83.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the ONT POTS port switch. Options: 1. on(1) - Indicates that the switch of the ONT POTS port is on 2. off(2) - Indicates that the switch of the ONT POTS port is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponDeviceOntTDMPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.2.84 | NA | |||||||||||
table · not-accessible · current The ONT TDM port config table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntTDMPortId. | |||||||||||||
| RhwGponDeviceOntTDMPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.84.1 | NA | |||||||||||
row · not-accessible · current The ONT TDM port config table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntTDMPortId. | |||||||||||||
| ChwGponDeviceOntTDMPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.84.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT TDM port ID. | |||||||||||||
| ChwGponDeviceOntTDMPortState | 1.3.6.1.4.1.2011.6.128.1.1.2.84.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the ONT TDM port state. Options: 1. normal (1) - Indicates that the ONT TDM port state is normal 2. los (2) - Indicates that the ONT TDM port state is LOS 3. ais(3) - Indicates that the ONT TDM port state is AIS 4. lof(4) - Indicates that the ONT TDM port state is LOF 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntTDMPortOperateStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.84.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current ONT TDM port enable switch. Options: 1. enable(1) - Enable the ONT TDM port switch 2. disable(2) - Disable the ONT TDM port switch 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponDeviceCtcRemoteOntPortVlanConfigTable | 1.3.6.1.4.1.2011.6.128.1.1.2.91 | NA | |||||||||||
table · not-accessible · current The ont port's remote native vlan info table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex, hwEponDeviceOntPortType and hwEponDeviceOntPortId. | |||||||||||||
| RhwEponDeviceCtcRemoteOntPortVlanConfigEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.91.1 | NA | |||||||||||
row · not-accessible · current The ont port's remote native vlan info table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex, hwEponDeviceOntPortType and hwEponDeviceOntPortId. | |||||||||||||
| ChwEponDeviceOntPortType | 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ont port's type. The value 24 indicates the FE port. The value 34 indicates the GE port. The value 47 indicates the ETH port. | |||||||||||||
| ChwEponDeviceOntPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ont port ID. | |||||||||||||
| ChwEponDeviceCtcRemoteOntPortVlanMode | 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the vlan mode of ont's port. Options: 1. transparent(0) - Indicates that the vlan mode of ont's port is transparent 2. tag(1) - Indicates that the vlan mode of ont's port is tag 3. translation(2) - Indicates that the vlan mode of ont's port is translation 4. aggregation(3) - Indicates that the vlan mode of ont's port is aggregation 5. trunk(4) - Indicates that the vlan mode of ont's port is trunk 6. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceCtcRemoteOntPortDefaultTagTPID | 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's native vlan TPID. | |||||||||||||
| ChwEponDeviceCtcRemoteOntPortDefaultTagCFI | 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's native vlan CFI. | |||||||||||||
| ChwEponDeviceCtcRemoteOntPortDefaultTagPri | 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's native vlan priority. | |||||||||||||
| ChwEponDeviceCtcRemoteOntPortDefaultTagVID | 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's native VLAN ID. | |||||||||||||
| ThwEponDeviceCtcRemoteOntPortVlanTranslationInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.92 | NA | |||||||||||
table · not-accessible · current This table is used to display the configuration information about VLAN switching pair of the ONT port. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex, hwEponDeviceOntPortType, hwEponDeviceOntPortId and hwEponDeviceOntPortVlanIndex. | |||||||||||||
| RhwEponDeviceCtcRemoteOntPortVlanTranslationInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1 | NA | |||||||||||
row · not-accessible · current This table is used to display the configuration information about VLAN switching pair of the ONT port. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex, hwEponDeviceOntPortType, hwEponDeviceOntPortId and hwEponDeviceOntPortVlanIndex. | |||||||||||||
| ChwEponDeviceOntPortVlanIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the vlan index. | |||||||||||||
| ChwEponDeviceCtcOntPortCvlanTagTPID | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's vlan TPID. | |||||||||||||
| ChwEponDeviceCtcOntPortCvlanTagCFI | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's vlan CFI. | |||||||||||||
| ChwEponDeviceCtcOntPortCvlanTagPri | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's vlan priority. | |||||||||||||
| ChwEponDeviceCtcOntPortCvlanTagVID | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's VLAN ID. | |||||||||||||
| ChwEponDeviceCtcOntPortSvlanTagTPID | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's vlan TPID. | |||||||||||||
| ChwEponDeviceCtcOntPortSvlanTagCFI | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's vlan CFI. | |||||||||||||
| ChwEponDeviceCtcOntPortSvlanTagPri | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's vlan priority. | |||||||||||||
| ChwEponDeviceCtcOntPortSvlanTagVID | 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ont port's VLAN ID. | |||||||||||||
| ThwEponDeviceCtcRemoteOntMultiCtrItemTable | 1.3.6.1.4.1.2011.6.128.1.1.2.93 | NA | |||||||||||
table · not-accessible · current This table is used to display the ONT multicast control list. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntMultiCtrItemIndex. | |||||||||||||
| RhwEponDeviceCtcRemoteOntMultiCtrItemEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.93.1 | NA | |||||||||||
row · not-accessible · current This table is used to display the ONT multicast control list. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntMultiCtrItemIndex. | |||||||||||||
| ChwEponDeviceOntMultiCtrItemIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the item's index. | |||||||||||||
| ChwEponDeviceCtcOntMultiCtrlType | 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the multicast contrl type. Options: 1. gda(0) - Based GDA MAC only 2. gdaVLAN(1) - Based GDA MAC plus muliticast VLAN ID 3. gdaSA(2) - Based GDA MAC plus SA MAC 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceCtcOntMultiCtrlUsrID | 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the user ID of multicast. | |||||||||||||
| ChwEponDeviceCtcOntMultiCtrlGDA | 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.4 | OCTET STRING (SIZE (6)) | RO | ||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current This object indicates the GDA of multicast control. | |||||||||||||
| ChwEponDeviceCtcOntMultiCtrlVlanIDorSA | 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.5 | OCTET STRING (SIZE (6)) | RO | ||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current This object indicates the SA of multicast control. | |||||||||||||
| ThwGponDeviceOntSnmpStaticRouteConfigTable | 1.3.6.1.4.1.2011.6.128.1.1.2.100 | NA | |||||||||||
table · not-accessible · current This is the ONT SNMP static route configuration table. This table is used to configure and query the SNMP route configuration of an ONT. The index of this table is a combination of ifIndex, hwXponDeviceOntIndex and hwGponOntObjectSnmpStaticRouteIndex. | |||||||||||||
| RhwGponDeviceOntSnmpStaticRouteConfigEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.100.1 | NA | |||||||||||
row · not-accessible · current This is the ONT SNMP static route configuration table. This table is used to configure and query the SNMP route configuration of an ONT. The index of this entry is a combination of ifIndex, hwXponDeviceOntIndex and hwGponOntObjectSnmpStaticRouteIndex. | |||||||||||||
| ChwGponOntObjectSnmpStaticRouteIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT SNMP static route table index. | |||||||||||||
| ChwGponOntObjectSnmpStaticRouteIpAddress | 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the IP address. | |||||||||||||
| ChwGponOntObjectSnmpStaticRouteNetMask | 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the subnet mask of the IP address. | |||||||||||||
| ChwGponOntObjectSnmpStaticRouteNextHop | 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the next hop IP address. | |||||||||||||
| ChwGponOntObjectSnmpStaticRouteRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponOntObjectSnmpStaticRouteRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwGponOntObjectSnmpStaticRouteOutputPort | 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.6 | Integer32 (-1 | 0..254) | RW | ||||||||||
column · Integer32 (-1 | 0..254) · read-write · current This object indicates the output portid. | |||||||||||||
| ThwGponDeviceOntRegisterExInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.101 | NA | |||||||||||
table · not-accessible · current This table is used to save the ont's register info, less than 10 times. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntRegisterInfoIndex. | |||||||||||||
| RhwGponDeviceOntRegisterExInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1 | NA | |||||||||||
row · not-accessible · current This table is used to save the ont's register info, less than 10 times. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntRegisterInfoIndex. | |||||||||||||
| ChwGponDeviceOntRegisterInfoIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT register information index. | |||||||||||||
| ChwGponDeviceOntRegisterInfoAuthMethod | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the authentication mode for the ONT. The value (1) indicates that the mode is SN or MAC. The value (2) indicates that the mode is the combination of SN and PASSWORD or combination of MAC and PASSWORD. The value (3) indicates that the mode is PASSWORD and the type is always on. The value (4) indicates that the mode is PASSWORD and the type is once on. The value (5) indicates that the mode is LOID and the type is always on. The value (6) indicates that the mode is LOID and the type is once on. The value (7) indicates that the mode is the combination of LOID and CHECKCODE ,and the type is always on. The value (8) indicates that the mode is the combination of LOID and CHECKCODE ,and the type is once on. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceOntRegisterInfoSN | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.3 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the ONT serial number. | |||||||||||||
| ChwGponDeviceOntRegisterInfoPassword | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.4 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current This object indicates the ONT password GPON password size (0..10) XG-PON password size (0..36) | |||||||||||||
| ChwGponDeviceOntRegisterInfoType | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.5 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current This object indicates the ONT type | |||||||||||||
| ChwGponDeviceOntRegisterInfoUpTime | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.6 | OCTET STRING (SIZE (0..30)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..30)) · read-only · current This object indicates the time when the ONT went online. | |||||||||||||
| ChwGponDeviceOntRegisterInfoDownTime | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.7 | OCTET STRING (SIZE (0..30)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..30)) · read-only · current This object indicates the time when the ONT went offline. | |||||||||||||
| ChwGponDeviceOntRegisterInfoDownCause | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the reason why the ONT went offline.
Options:
1. ontdeleted(0) - The cause of ONT's down is that the ont is deleted
2. linkeddown(1) - The cause of ONT's down is that the ont is disconnected
3. losi(2) - The cause of ONT's down is LOSi(Loss of signal for ONUi) or LOBi (Loss of burst for ONUi)
4. lofi(3) - The cause of ONT's down is that the ont is lofi(OLT can not receive
expected optical frame from ONT)
5. sfi(4) - The cause of ONT's down is that the ont is sfi(Signal fail of ONUi)
6. loai(5) - The cause of ONT's down is that the ont is loai(Loss of acknowledge with ONUi)
7. loami(6) - The cause of ONT's down is that the ont is loami(Loss of PLOAM for ONUi)
8. disablefail(7) - The cause of ONT's down is that the ont fails to be deactivated
9. deactivated(8) - The cause of ONT's down is that the ont is deactivated
10. reset(9) - The cause of ONT's down is that the ont is reseted
11. reregister(10) - The cause of ONT's down is that the ont is registered again
12. popupfail(11) - The cause of ONT's down is that the ont popup test fails
13. authfail(12) - The cause of ONT's down is that the ont authentication fails
14. powerdown(13) - The cause of ONT's down is that the ont is powered off
15. reserved(14) - Reserved
16. loki(15) - The cause of ONT's down is that the ont is loki(Loss of key synch with ONUi)
17. ringDeactivated(18) - The cause of ONT's down is that the ont is deactivated due to the ring
18. turnOffOptic(30) - The cause of ONT's down is that the ont optical module is shut down
19. cmdReboot(31) - The cause of ONT's down is that the ont is reset by ont command
20. ontResetkeyReboot(32) - The cause of ONT's down is that the ont is reset by ont reset button
21. ontSoftwareReset(33) - The cause of ONT's down is that the ont is reset by ont software
22. broadcastAttackDeactivated(34) - The cause of ONT's down is that the ont is deactivated due to broadcast attack
23. operatorCheckFail(35) - The cause of ONT's down is that operator check fail
24. ontOltIncompatible(36) - The cause of ONT's down is that the ont is incompatible with the OLT
25. rogueOntselfDetected(37) - The cause of ONT's down is that the rogue ont detected by itself
26. autoIsolateReset(38) - The cause of ONT's down is that the ont resets to prevent rogue ont attacks
27. autoIsolateDeact(39) - The cause of ONT's down is that the ont is deactivated to prevent rogue ont attacks
28. ontNotInWhiteList(40) - The cause of ONT's down is that the ont is not in the white list
29. noerror(255) - The cause of ONT's down is that the ont is noerror
30. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntRegisterInfoLoid | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.9 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT LOID. | |||||||||||||
| ChwGponDeviceOntRegisterInfoCheckcode | 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.10 | OCTET STRING (SIZE (0..12)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-only · current This object indicates the ONT CHECKCODE. | |||||||||||||
| ThwEponDeviceOntSnmpStaticRouteTable | 1.3.6.1.4.1.2011.6.128.1.1.2.102 | NA | |||||||||||
table · not-accessible · current This is the ONT SNMP static route configuration table. This table is used to configure and query the SNMP route configuration of an ONT. The index of this table is a combination of ifIndex, hwXponDeviceOntIndex and hwEponOntSnmpStaticRouteIndex. | |||||||||||||
| RhwEponDeviceOntSnmpStaticRouteEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.102.1 | NA | |||||||||||
row · not-accessible · current This is the ONT SNMP static route configuration table. This table is used to configure and query the SNMP route configuration of an ONT. The index of this entry is a combination of ifIndex, hwXponDeviceOntIndex and hwEponOntSnmpStaticRouteIndex. | |||||||||||||
| ChwEponOntSnmpStaticRouteIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT SNMP static route table index. | |||||||||||||
| ChwEponOntSnmpStaticRouteIpAddress | 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the IP address. | |||||||||||||
| ChwEponOntSnmpStaticRouteNetMask | 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the subnet mask of the IP address. | |||||||||||||
| ChwEponOntSnmpStaticRouteNextHop | 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the next hop IP address. | |||||||||||||
| ChwEponOntSnmpStaticRouteRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwEponOntSnmpStaticRouteRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwEponDeviceOntRegisterExInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.103 | NA | |||||||||||
table · not-accessible · current This table is used to save the ONT's register info, less than 10 times. The index of this table is a combination of ifIndex, hwXponDeviceOntIndex and hwEponDeviceOntRegisterInfoIndex. | |||||||||||||
| RhwEponDeviceOntRegisterExInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1 | NA | |||||||||||
row · not-accessible · current This table is used to save the ONT's register info, less than 10 times. The index of this entry is a combination of ifIndex, hwXponDeviceOntIndex and hwEponDeviceOntRegisterInfoIndex. | |||||||||||||
| ChwEponDeviceOntRegisterInfoIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT register information index. | |||||||||||||
| ChwEponDeviceOntRegisterInfoAuthMethod | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the authentication mode for the ONT. Options: 1. mac(1) - The authentication mode is MAC 2. macpassword(2) - The authentication mode is MAC and password 3. alwayson(3) - The authentication mode is always on 4. onceon(4) - The authentication mode is once on 5. lOIDonceon(5) - The authentication mode is LOID and once on 6. lOIDalwayson(6) - The authentication mode is LOID and always on 7. lOIDCheckCodeOnceon(7) - The authentication mode is LOID, checkcode and once on 8. lOIDCheckCodeAlwayson(8) - The authentication mode is LOID, checkcode and once always on 9. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceOntRegisterInfoMac | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.3 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current This object indicates the ONT MAC address. | |||||||||||||
| ChwEponDeviceOntRegisterInfoPassword | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.4 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the ONT password. | |||||||||||||
| ChwEponDeviceOntRegisterInfoType | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.5 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current This object indicates the ONT type. | |||||||||||||
| ChwEponDeviceOntRegisterInfoUpTime | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.6 | OCTET STRING (SIZE (0..30)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..30)) · read-only · current This object indicates the time when the ONT goes online. | |||||||||||||
| ChwEponDeviceOntRegisterInfoDownTime | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.7 | OCTET STRING (SIZE (0..30)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..30)) · read-only · current This object indicates the time when the ONT goes offline. | |||||||||||||
| ChwEponDeviceOntRegisterInfoDownCause | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the reason why the ONT goes offline.
Options:
1. ontdeleted(0) - The cause of ONT's down is that the ont is deleted
2. linkeddown(1) - The cause of ONT's down is that the ont is disconnected
3. losi(2) - The cause of ONT's down is that the ont is losi(OLT can not receive
expected optical signals from ONT)
4. lofi(3) - The cause of ONT's down is that the ont is lofi(OLT can not receive
expected optical frame from ONT)
5. sfi(4) - The cause of ONT's down is that the ont is sfi(Signal fail of ONUi)
6. loai(5) - The cause of ONT's down is that the ont is loai(Loss of acknowledge with ONUi)
7. loami(6) - The cause of ONT's down is that the ont is loami(Loss of PLOAM for ONUi)
8. disablefail(7) - The cause of ONT's down is that the ont fails to be deactivated
9. deactivated(8) - The cause of ONT's down is that the ont is deactivated
10. reset(9) - The cause of ONT's down is that the ont is reseted
11. reregister(10) - The cause of ONT's down is that the ont is registered again
12. popupfail(11) - The cause of ONT's down is that the ont popup test fails
13. authfail(12) - The cause of ONT's down is that the ont authentication fails
14. powerdown(13) - The cause of ONT's down is that the ont is powered off
15. reserved(14) - Reserved
16. loki(15) - The cause of ONT's down is that the ont is loki(Loss of key synch with ONUi)
17. ringDeactivated(18) - The cause of ONT's down is that the ont is deactivated due to the ring
18. broadcastAttackDeactivated(34) - The cause of ONT's down is that the ont is deactivated due to broadcast attack
19. noerror(255) - The cause of ONT's down is that the ont is noerror
20. invalid(-1) - Indicates that the query fails or no information is detected
21. rogueOntselfDetected(37) - The cause of ONT's down is that the rogue ont detected by itself
22. antirogueontautoisolatereset(38) - The cause of ONT's down is to prevent rogue ONT attacks by reset ONT
23. antirogueontautoisolatedeactive(39) - The cause of ONT's down is to prevent rogue ONT attacks by deactive ONT
| |||||||||||||
| ChwEponDeviceOntRegisterInfoLoid | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.9 | OCTET STRING (SIZE (0..24)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..24)) · read-only · current This object indicates the ONT LOID. | |||||||||||||
| ChwEponDeviceOntRegisterInfoCheckcode | 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.10 | OCTET STRING (SIZE (0..12)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-only · current This object indicates the ONT CHECKCODE | |||||||||||||
| ThwEponDeviceOntOpticsDdmInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.104 | NA | |||||||||||
table · not-accessible · current This table is used to query the information about the optical transceiver of the ONT. The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. | |||||||||||||
| RhwEponDeviceOntOpticsDdmInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.104.1 | NA | |||||||||||
row · not-accessible · current This table is used to query the information about the optical transceiver of the ONT. The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex.
| |||||||||||||
| ChwEponOntOpticalDdmOltRxOntPower | 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The ONT optical power received on the OLT, unit dBm. The relationship between the actual value and the value get from this leaf node is as follows, Actual value = ((Node value - 10000) / 100) | |||||||||||||
| ChwEponOntOpticalDdmTemperature | 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the temperature of the optical module. | |||||||||||||
| ChwEponOntOpticalDdmBiasCurrent | 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Bias Current of the optical module. | |||||||||||||
| ChwEponOntOpticalDdmTxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the transmitting power of the optical module. | |||||||||||||
| ChwEponOntOpticalDdmRxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the receiving power of the optical module. | |||||||||||||
| ChwEponOntOpticalDdmVoltage | 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the Power feed voltage of the optical module. | |||||||||||||
| ChwEponOntOpticalDdmOltTxPower | 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the transmitting power of the ont peer optical module. | |||||||||||||
| ThwXponDeviceOltDualparentTable | 1.3.6.1.4.1.2011.6.128.1.1.2.120 | NA | |||||||||||
table · not-accessible · current This table is the type B dual-homing configuration table. The index of this table is ifIndex. | |||||||||||||
| RhwXponDeviceOltDualparentEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.120.1 | NA | |||||||||||
row · not-accessible · current This table is the type B dual-homing configuration table. The index of this entry is ifIndex.
| |||||||||||||
| ChwXponDeviceOltDualparentJoin | 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether to add a port to the protection group. Options: 1.joinwork(1) - Add the port as a working port to the protection group 2.joinprotect(2) - Add the port as a protection port to the protection group 3.undojoin(3) - Delete the memer port of the protection group 4.invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponDeviceOltDualparentFreeze | 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the protection group is in the frozen state. Options: 1. freeze(1) - Freeze the protection group 2. undofreeze(2) - Undo the frozen state of the protection group 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponDeviceOltDualparentForceSwitch | 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the port is in the forced working mode. Options: 1. force(1) - The port is in the forced working mode 2. undoforce(2) - The port is not in the forced working mode 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponDeviceOltDualparentWorkState | 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to set or show the port protect status. Options: 1. active(1) - The port protect status is active 2. standby(2) - The port protect status is standby 3. fault(3) - The port protect status is fault 4. detect(4) - The port protect status is detective 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponDeviceOltDualparentDetectTimeLen | 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the duration of the protection group member in the detect state. | |||||||||||||
| ChwXponDeviceOltDualparentDesc | 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.6 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-write · current This object indicates the description of the member port of the protection group. | |||||||||||||
| ThwXponDynamicMacQueryTable | 1.3.6.1.4.1.2011.6.128.1.1.2.130 | NA | |||||||||||
table · not-accessible · current This table is used to query dynamic MAC address. The index of this table is a combination of ifIndex, hwXponDynamicMacVlanId, hwXponDynamicMacIndex, hwXponDynamicMacQueryType, hwXponDynamicMacQueryPara0, hwXponDynamicMacQueryPara1, hwXponDynamicMacQueryPara2 and hwXponDynamicMacQueryPara3. | |||||||||||||
| RhwXponDynamicMacQueryEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1 | NA | |||||||||||
row · not-accessible · current This table is used to query dynamic MAC address. The index of this entry is a combination of ifIndex, hwXponDynamicMacVlanId, hwXponDynamicMacIndex, hwXponDynamicMacQueryType, hwXponDynamicMacQueryPara0, hwXponDynamicMacQueryPara1, hwXponDynamicMacQueryPara2 and hwXponDynamicMacQueryPara3. | |||||||||||||
| ChwXponDynamicMacVlanId | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.1 | Integer32 (-1 | 1..4094) | NA | ||||||||||
column · Integer32 (-1 | 1..4094) · not-accessible · current This object indicates the VLAN of dynamic MAC address. The value(-1) is invalid value. | |||||||||||||
| ChwXponDynamicMacIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the dynamic MAC address index. | |||||||||||||
| ChwXponDynamicMacQueryType | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.3 | HwXponDynamicMacQueryType | NA | ||||||||||
column · HwXponDynamicMacQueryType · not-accessible · current This object indicates the query type. Options: 1. xponOntPortInSpecVlan(1) - The ONT port is in the specified vlan 2. xponOntInSpecPort(2) - The specified ONT port 3. xponOntInSpecOnt(3) - The specified ONT 4. xponOntInSpecWlan(4) - The WLAN of specified ONT | |||||||||||||
| ChwXponDynamicMacQueryPara0 | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.4 | HwXponDynamicMacQueryPara | NA | ||||||||||
column · HwXponDynamicMacQueryPara · not-accessible · current This object indicates the ONT ID, range: 0~254. | |||||||||||||
| ChwXponDynamicMacQueryPara1 | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.5 | HwXponDynamicMacQueryPara | NA | ||||||||||
column · HwXponDynamicMacQueryPara · not-accessible · current This object indicates the type of the ONT port. | |||||||||||||
| ChwXponDynamicMacQueryPara2 | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.6 | HwXponDynamicMacQueryPara | NA | ||||||||||
column · HwXponDynamicMacQueryPara · not-accessible · current This object indicates the port ID of the ONT. | |||||||||||||
| ChwXponDynamicMacQueryPara3 | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.7 | HwXponDynamicMacQueryPara | NA | ||||||||||
column · HwXponDynamicMacQueryPara · not-accessible · current This object indicates the Fourth reserved Parameter of HwXponDynamicMacQueryEntry. | |||||||||||||
| ChwXponDynamicMacAddr | 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.8 | OCTET STRING (SIZE (0..1280)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..1280)) · read-only · current MAC address. When hwXponDynamicMacQueryType is 1 ,the MAC addresses which can include 5 MAC addresses at most, and its format is (XX.XX.XX.XX.XX.XX). When hwXponDynamicMacQueryType is 2, 3 or 4, the query result contains MAC address entries with a length of 0-1280 bytes. A maximum of 128 MAC addresses can be queried, each entry containing 10 bytes. The queried entry is in a format of port type (1 byte)+port ID (1 byte)+VLAN ID (2 bytes)+MAC address (6 bytes), where the blank field can be represented by 0, for example, 3401400000E0FC000001. Range: 0-1280 | |||||||||||||
| ThwGponDeviceUnboundGemPortQueryTable | 1.3.6.1.4.1.2011.6.128.1.1.2.140 | NA | |||||||||||
table · not-accessible · current This is the unbound GEM port query table in the profile mode. The index of this table is a combination of ifIndex and hwGponDeviceUnboundGemPortId. | |||||||||||||
| RhwGponDeviceUnboundGemPortQueryEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.140.1 | NA | |||||||||||
row · not-accessible · current This is the unbound GEM port query table in the profile mode. The index of this entry is a combination of ifIndex and hwGponDeviceUnboundGemPortId. | |||||||||||||
| ChwGponDeviceUnboundGemPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the unbound GEM port ID. | |||||||||||||
| ChwGponDeviceUnboundGemPortServiceType | 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the carried service type of the unbound GEM port. Options: 1. tdm(1) - TDM 2. omci(2) - OMCI 3. eth(3) - ETH 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceUnboundGemPortEncrypt | 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the downstream encryption switch of the unbound GEM port. Options: 1. on(1) - Indicates that the downstream encryption switch of the unbound GEM port is on 2. off(2) - Indicates that the downstream encryption switch of the unbound GEM port is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceUnboundGemPortCascade | 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the subtending attribute of the unbound GEM port. Options: 1. on(1) - Indicates that the subtending attribute of the unbound GEM port is on 2. off(2) - Indicates that the subtending attribute of the unbound GEM port is off 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceUnboundGemPortDescription | 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.5 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current This object indicates the unbound GEM port description. | |||||||||||||
| ChwGponDeviceUnboundGemPortEntryStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceUnboundGemPortEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwGponDeviceOntGemPortBindTable | 1.3.6.1.4.1.2011.6.128.1.1.2.141 | NA | |||||||||||
table · not-accessible · current This is ONT GEM port configuration table. This table is used to configure the mapping relation between the T-CONT and GEM port of an ONT. The index of this table is a combination of ifIndex and hwGponDeviceOntGemPortBindGemPortId. | |||||||||||||
| RhwGponDeviceOntGemPortBindEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1 | NA | |||||||||||
row · not-accessible · current This is ONT GEM port configuration table. This table is used to configure the mapping relation between the T-CONT and GEM port of an ONT. The index of this entry is a combination of ifIndex and hwGponDeviceOntGemPortBindGemPortId. | |||||||||||||
| ChwGponDeviceOntGemPortBindGemPortId | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT GEM Port ID. | |||||||||||||
| ChwGponDeviceOntGemPortBindOntId | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ONT ID. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwGponDeviceOntGemPortBindTcontId | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.3 | Integer32 (0..127) | RW | ||||||||||
column · Integer32 (0..127) · read-write · current This object indicates the T-CONT ID. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwGponDeviceOntGemPortBindUpPQIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.4 | Integer32 (0..7) | RW | ||||||||||
column · Integer32 (0..7) · read-write · current This object indicates the up stream priority-queue index. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwGponDeviceOntGemPortBindTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.5 | Integer32 (1..1024) | RW | ||||||||||
column · Integer32 (1..1024) · read-write · current This object indicates the traffic table id of the GEM port. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwGponDeviceOntGemPortBindEntryStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceOntGemPortBindEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwGponDeviceOntGemPortBindDownPQIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.7 | Integer32 (-1 | 0..7 | 254) | RW | ||||||||||
column · Integer32 (-1 | 0..7 | 254) · read-write · current This object indicates the down stream priority-queue index. 0..7: Down Stream PQ index. 254 : Apaptive, Gemport Down Stream PQ is decided by ont. -1 : Default Value.Gemport Down Stream PQ is decided by olt. | |||||||||||||
| ChwGponDeviceOntGemPortBindTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.8 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the traffic table name of the GEM port. | |||||||||||||
| ThwGponDeviceLineProfTcontRefTable | 1.3.6.1.4.1.2011.6.128.1.1.2.142 | NA | |||||||||||
table · not-accessible · current This is TCONTS configuration table in gpon mode. This table is used to configure these TCONTS which are not binded dba-profile. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceLineProfTcontRefIndex. | |||||||||||||
| RhwGponDeviceLineProfTcontRefEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.142.1 | NA | |||||||||||
row · not-accessible · current This is TCONTS configuration table in gpon mode. This table is used to configure these TCONTS which are not binded dba-profile. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceLineProfTcontRefIndex. | |||||||||||||
| ChwGponDeviceLineProfTcontRefIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.142.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the TCONT Index. | |||||||||||||
| ChwGponDeviceLineProfTcontName | 1.3.6.1.4.1.2011.6.128.1.1.2.142.1.2 | OCTET STRING (SIZE (1..33)) | RW | ||||||||||
column · OCTET STRING (SIZE (1..33)) · read-write · current This object indicates the dba-profile name. | |||||||||||||
| ChwGponDeviceLineProfAllocId | 1.3.6.1.4.1.2011.6.128.1.1.2.142.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the alloc ID. | |||||||||||||
| ChwGponDeviceLineProfTcontRefEntryStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.142.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceLineProfTcontRefEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwXponDeviceRogueOntTable | 1.3.6.1.4.1.2011.6.128.1.1.2.143 | NA | |||||||||||
table · not-accessible · current This is the rogue ONT list table. The index of this table is ifIndex. | |||||||||||||
| RhwXponDeviceRogueOntEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.143.1 | NA | |||||||||||
row · not-accessible · current This is the rogue ONT list table. The index of this entry is ifIndex.
| |||||||||||||
| ChwXponDeviceRogueOnt | 1.3.6.1.4.1.2011.6.128.1.1.2.143.1.1 | OntList | RO | ||||||||||
column · OntList · read-only · current This object indicates the rogue ont list. | |||||||||||||
| ThwEponDeviceOntLlidTable | 1.3.6.1.4.1.2011.6.128.1.1.2.144 | NA | |||||||||||
table · not-accessible · current This is the ONT LLID related configuration table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlidIndex. | |||||||||||||
| RhwEponDeviceOntLlidEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.144.1 | NA | |||||||||||
row · not-accessible · current This is the ONT LLID related configuration table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlidIndex. | |||||||||||||
| ChwEponDeviceOntLlidIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.1 | Integer32 (0..1023) | NA | ||||||||||
column · Integer32 (0..1023) · not-accessible · current This object indicates the EPON line profile LLID config Llid index. | |||||||||||||
| ChwEponDeviceOntLlidValue | 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.2 | Integer32 (-1 | 0..65535) | RO | ||||||||||
column · Integer32 (-1 | 0..65535) · read-only · current This object indicates the value of Logical Link Identifier. | |||||||||||||
| ChwEponDeviceOntLlidDbaProfileName | 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.3 | OCTET STRING (SIZE (0..33)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..33)) · read-write · current This object indicates the name of the DBA profile. | |||||||||||||
| ChwEponDeviceOntLlidCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.4 | Integer32 (1..1024 | 65534) | RW | ||||||||||
column · Integer32 (1..1024 | 65534) · read-write · current This object indicates the ONT Llid car profile id (1~1024, 0xfffe-unconcern). | |||||||||||||
| ChwEponDeviceOntLlidCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.5 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the ONT Llid car profile name. | |||||||||||||
| ThwEponDeviceOntPortVlanTable | 1.3.6.1.4.1.2011.6.128.1.1.2.145 | NA | |||||||||||
table · not-accessible · current This is the ONT port vlan configuration table. The index of this table is a combination of ifIndex, hwEponOntPortVlanCfgOntPhyType, hwEponDeviceOntIndex, hwEponOntPortVlanCfgOntPhyIndex and hwEponOntPortVlanCfgCVlan. | |||||||||||||
| RhwEponDeviceOntPortVlanEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.145.1 | NA | |||||||||||
row · not-accessible · current This is the ONT port vlan configuration table. The index of this entry is a combination of ifIndex, hwEponOntPortVlanCfgOntPhyType, hwEponDeviceOntIndex, hwEponOntPortVlanCfgOntPhyIndex and hwEponOntPortVlanCfgCVlan. | |||||||||||||
| ChwEponOntPortVlanCfgOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. moca(46) - MOCA 6. eth(47) - ETH 7. iphost(50) - IPHOST
| |||||||||||||
| ChwEponOntPortVlanCfgOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port index of the ONT. | |||||||||||||
| ChwEponOntPortVlanCfgCVlan | 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.3 | Integer32 (1..4094 | 65534) | NA | ||||||||||
column · Integer32 (1..4094 | 65534) · not-accessible · current This object indicates the epon ont port customer vlan. When the vlan mode is transparent, should input 65534 (0xfffe). | |||||||||||||
| ChwEponOntPortVlanCfgSVlan | 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.4 | Integer32 (-1 | 1..4094) | RW | ||||||||||
column · Integer32 (-1 | 1..4094) · read-write · current This object indicates the epon ont port service vlan. | |||||||||||||
| ChwEponOntPortVlanCfgType | 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the xpon service profile port vlan type. Options: 1. transparent(1) - Indicates that the XPON service profile port vlan type is transparent 2. translation(2) - Indicates that the XPON service profile port vlan type is translation 3. invalid(-1) - Indicates that the XPON service profile port vlan type is invalid
| |||||||||||||
| ChwEponOntPortVlanCfgRowstatus | 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Row status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwEponDeviceAlarmProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.2.146 | NA | |||||||||||
table · not-accessible · current This table is used to create, delete, modify or query the EPON alarm profile. The index of this table is hwEponDeviceAlarmProfileInfoNameIndex. | |||||||||||||
| RhwEponDeviceAlarmProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1 | NA | |||||||||||
row · not-accessible · current This table is used to create, delete, modify or query the EPON alarm profile. The index of this entry is hwEponDeviceAlarmProfileInfoNameIndex. | |||||||||||||
| ChwEponDeviceAlarmProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the name of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileBindNum | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.2 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This object indicates the bind number of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxDropEventsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.3 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream drop events threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxDropEventsRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.4 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream drop events restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxDropEventsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.5 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream drop events threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxDropEventsRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.6 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream drop events restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxCRCErrorFramesThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.7 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream CRC error frames threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxCRCErrorFramesRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.8 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream CRC error frames restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxCRCErrorFramesThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.9 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream CRC error frames threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxCRCErrorFramesRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.10 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream CRC error frames restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxUndersizeFramesThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.11 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream under size frames threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxUndersizeFramesRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.12 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream under size frames restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxUndersizeFramesThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.13 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream under size frames threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxUndersizeFramesRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.14 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream under size frames restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxOversizeFramesThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.15 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream over size frames threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxOversizeFramesRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.16 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream over size frames restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxOversizeFramesThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.17 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream over size frames threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxOversizeFramesRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.18 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream over size frames restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxFragmentsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.19 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream fragments threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxFragmentsRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.20 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream fragments restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxFragmentsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.21 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream fragments threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxFragmentsRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.22 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream fragments restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxJabbersThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.23 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream jabbers threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxJabbersRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.24 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream jabbers restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxJabbersThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.25 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream jabbers threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxJabbersRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.26 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream jabbers restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxDiscardsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.27 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream discards threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxDiscardsRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.28 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream discards restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxDiscardsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.29 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream discards threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxDiscardsRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.30 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream discards restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxErrorsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.31 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream errors threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileTxErrorsRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.32 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the down stream errors restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxErrorsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.33 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream errors threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRxErrorsRestoreThreshold | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.34 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current This object indicates the up stream errors restore threshold of EPON alarm profile. | |||||||||||||
| ChwEponDeviceAlarmProfileRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.35 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwGponDeviceOntPortVlanTable | 1.3.6.1.4.1.2011.6.128.1.1.2.147 | NA | |||||||||||
table · not-accessible · current This table is used to create, delete, modify or query GPON ONT's distributed port vlan. The index of this table is ifIndex, hwGponDeviceOntIndex, hwGponDeviceOntPortVlanPhyType, hwGponDeviceOntPortVlanPhyIndex, hwGponDeviceOntPortVlanCVlan, hwGponDeviceOntPortVlanCPri, hwGponDeviceOntPortVlanEtherType. | |||||||||||||
| RhwGponDeviceOntPortVlanEntry | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1 | NA | |||||||||||
row · not-accessible · current This table is used to create, delete, modify or query GPON ONT's distributed port vlan. The index of this entry is ifIndex, hwGponDeviceOntIndex, hwGponDeviceOntPortVlanPhyType, hwGponDeviceOntPortVlanPhyIndex, hwGponDeviceOntPortVlanCVlan, hwGponDeviceOntPortVlanCPri, hwGponDeviceOntPortVlanEtherType. | |||||||||||||
| ChwGponDeviceOntPortVlanPhyType | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. wifi(40) - WiFi 7. moca(46) - MOCA 8. eth(47) - ETH 9. iphost(50) - IPHOST
| |||||||||||||
| ChwGponDeviceOntPortVlanPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port index of the ONT. | |||||||||||||
| ChwGponDeviceOntPortVlanCVlan | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port customer vlan distributed configured on GPON ONT. When the vlan mode is transparent, the custom vlan should be 65534 (0xfffe). When the vlan type is q-in-q and user vlan attribute is untagged, custom vlan should be 0xfffd(65533). | |||||||||||||
| ChwGponDeviceOntPortVlanCPri | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.4 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port translation or qinq c-priority distributed configured on GPON ONT. | |||||||||||||
| ChwGponDeviceOntPortVlanEtherType | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.5 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates customer service encapsulation type distributed configured on GPON ONT. Options: 1. ipv4-ipoe(1) - Indicates that the customer service encapsulation type is ipv4 ipoe 2. pppoe(2) - Indicates that the customer service encapsulation type is pppoe 3. ipv6-ipoe(4) - Indicates that the customer service encapsulation type is ipv6 ipoe 4. invalid(-1) - Indicates that don't specify the customer service encapsulation type 5. 0x600-0xffff - Indicates that the customer service encapsulation type is user-defined | |||||||||||||
| ChwGponDeviceOntPortVlanCfgType | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the port vlan type distributed configured on GPON ONT. Options: 1. transparent(1) - Indicates that the port vlan type distributed configured on GPON ONT is transparent 2. translation(2) - Indicates that the port vlan type distributed configured on GPON ONT is translation distributed configured on GPON ONT 3. qinq(3) - Indicates that the port vlan type distributed configured on GPON ONT is qinq 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntPortVlanSVlan | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.7 | Integer32 (-1 | 0..4095) | RW | ||||||||||
column · Integer32 (-1 | 0..4095) · read-write · current This object indicates the port service vlan distributed configured on GPON ONT. | |||||||||||||
| ChwGponDeviceOntPortVlanSPri | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.8 | Integer32 (-1 | 0..7) | RW | ||||||||||
column · Integer32 (-1 | 0..7) · read-write · current This object indicates the port translation or qinq s-priority distributed configured on GPON ONT. | |||||||||||||
| ChwGponDeviceOntPortVlanSPriPolicy | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the s-vlan priority policy distributed configured on GPON ONT. Options: 1. specify(1) - Indicates that the s-vlan priority policy is specified 2. userCos(2) - Indicates that the s-vlan priority policy is userCos 3. dscpMapping(3) - Indicates that the s-vlan priority policy is dscpMapping 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceOntPortVlanDscpDefaultPri | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the default priority for dscpMapping policy. | |||||||||||||
| ChwGponDeviceOntPortVlanRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.11 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceOntPortVlanRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| NhwXponDeviceProfileObjects | 1.3.6.1.4.1.2011.6.128.1.1.3 | ||||||||||||
| ThwXponDeviceDbaProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.21 | NA | |||||||||||
table · not-accessible · current This is the DBA profile table. This table is used to create a DBA profile, and is used to modify or delete a DBA profile which is not bound. The index of this table is hwXponDeviceDbaProfileInfoNameIndex. | |||||||||||||
| RhwXponDeviceDbaProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1 | NA | |||||||||||
row · not-accessible · current This is the DBA profile table. This table is used to create a DBA profile, and is used to modify or delete a DBA profile which is not bound. The index of this entry is hwXponDeviceDbaProfileInfoNameIndex. | |||||||||||||
| ChwXponDeviceDbaProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.1 | OCTET STRING (SIZE (1..33)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..33)) · not-accessible · current This object indicates the DBA profile name. | |||||||||||||
| ChwXponDeviceDbaProfileType | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the DBA profile type. The value (1) indicates that the DBA profile type is Type 1. The value (2) indicates that the DBA profile type is Type 2. The value (3) indicates that the DBA profile type is Type 3. The value (4) indicates that the DBA profile type is Type 4. The value (5) indicates that the DBA profile type is Type 5. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwXponDeviceDbaProfileFixedRate | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.3 | Integer32 (0 | 128..10000000) | RW | ||||||||||
column · Integer32 (0 | 128..10000000) · read-write · current This object indicates the fixed bandwidth of the profile, unit Kbps. The value (0) is invalid value. | |||||||||||||
| ChwXponDeviceDbaProfileAssuredRate | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.4 | Integer32 (0 | 128..10000000) | RW | ||||||||||
column · Integer32 (0 | 128..10000000) · read-write · current This object indicates the assured bandwidth of the profile, unit Kbps. The value (0) is invalid value. | |||||||||||||
| ChwXponDeviceDbaProfileMaxRate | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.5 | Integer32 (0 | 128..10000000) | RW | ||||||||||
column · Integer32 (0 | 128..10000000) · read-write · current This object indicates the max bandwidth of the profile, unit Kbps. The value (0) is invalid value. | |||||||||||||
| ChwXponDeviceDbaProfileReferenceNum | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the binding times of the profile. | |||||||||||||
| ChwXponDeviceDbaProfileBandwithCompensate | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the bandwidth compensation policy of the profile. Options: 1. enable(1) - Enable the bandwidth compensation policy of the profile 2. disable(2) - Disable the bandwidth compensation policy of the profile
| |||||||||||||
| ChwXponDeviceDbaProfileEntryStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.8 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwXponDeviceDbaProfileEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwXponDeviceDbaProfileFixDelay | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Fix delay switch of the profile. Options: 1. enable(1) -Fix delay switch of the profile is enable 2. disable(2) -Fix delay switch of the profile is disable
| |||||||||||||
| ChwXponDeviceDbaProfileAdditionalBW | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Additional bandwidth type of the profile. Options: 1. nonAssure(1) -Additional bandwidth type of the profile is non assure 2. bestEffort(2) -Additional bandwidth type of the profile is best effort 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponDeviceDbaProfilePriority | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is used to set best effort bandwidth assignment priority. Ranging from 0 to 7, 0 is the lowest priority. The default value is 0. | |||||||||||||
| ChwXponDeviceDbaProfileWeight | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is used to set best effort bandwidth assignment weight. Ranging from 1 to 10000. The default value is 128. | |||||||||||||
| ChwXponDeviceDbaProfileOperateResult | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the commit result of a DBA profile, the aging time of the result is 20s. Options: This node identifies the result of DBA profile commit: Value 0 indicates the commit result is successfully. Value 1~0xFFFFFFFF-2 indicates the commit result is fail and return error code. Value 0xFFFFFFFD indicates that the commit does not complete Value 0xFFFFFFFE indicates that no commit is being operated Value 0xFFFFFFFF indicates invalid | |||||||||||||
| ChwXponDeviceDbaProfileAsynCommit | 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the mode of commit of a DBA profile Options: 1. asynMode (1) - Indicates that the commit mode is asynchronous 2. invalid(-1) - Invalid value The device will perform sync mode without the mib node.
| |||||||||||||
| ThwXponDeviceOntSnmpProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.22 | NA | |||||||||||
table · not-accessible · current This table is the SNMP parameter management profile of the ONT. The index of this table is hwXponDeviceOntSnmpProfileInfoNameIndex. | |||||||||||||
| RhwXponDeviceOntSnmpProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1 | NA | |||||||||||
row · not-accessible · current This table is the SNMP parameter management profile of the ONT. The index of this entry is hwXponDeviceOntSnmpProfileInfoNameIndex. | |||||||||||||
| ChwXponDeviceOntSnmpProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the ONT SNMP profile name. | |||||||||||||
| ChwXponDeviceOntSnmpProfileVersion | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the SNMP version number. Options: 1. v1(1) - Indicates that the SNMP version is v1 2. v2c(2) - Indicates that the SNMP version is v2c 3. v3(3) - Indicates that the SNMP version is v3 The default value is v1(1).
| |||||||||||||
| ChwXponDeviceOntSnmpProfileReadCommunityName | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.3 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the read community. | |||||||||||||
| ChwXponDeviceOntSnmpProfileWriteCommunityName | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.4 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the write community. | |||||||||||||
| ChwXponDeviceOntSnmpProfileTrapHostIP | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.5 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current This object indicates the target host address of sending trap msg. | |||||||||||||
| ChwXponDeviceOntSnmpProfileTrapHostSrcUDPPort | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ID of the host UDP source port from which the trap is sent. | |||||||||||||
| ChwXponDeviceOntSnmpProfileSecurityName | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.7 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-write · current This object indicates the securityname of SNMP msg | |||||||||||||
| ChwXponDeviceOntSnmpProfileRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.8 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwXponDeviceOntSnmpProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwXponDeviceOntSnmpProfileUsmUsername | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.9 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current The name of the SNMPv3 user. | |||||||||||||
| ChwXponDeviceOntSnmpProfileAuthenticationMode | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the user authentication mode. When the version of the SNMP profile is v1 or v2c, the invalid value will be returned. Options: 1. none(1) - No authentication mode 2. hmacMd5(2) - Hmac-md5 authentication mode 3. hmacSha(3) - Hmac-sha authentication mode 4. invalid(255) - Invalid value
| |||||||||||||
| ChwXponDeviceOntSnmpProfileAuthenticationPassword | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.11 | OCTET STRING (SIZE (0 | 8..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (0 | 8..64)) · read-write · current The authentication password. | |||||||||||||
| ChwXponDeviceOntSnmpProfilePrivacyMode | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the user encryption mode. When the version of the SNMP profile is v1 or v2c, the invalid value will be returned. Options: 1. none(1) - No encryption mode 2. des56(2) - 56-bit DES encryption mode 3. tripleDes(3) - 3DES encryption mode 4. aes128(4) - 128-bit AES encryption mode 5. aes192(20) - 192-bit AES encryption mode 6. aes256(21) - 256-bit AES encryption mode 7. invalid(255) - Invalid value
| |||||||||||||
| ChwXponDeviceOntSnmpProfilePrivacyPassword | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.13 | OCTET STRING (SIZE (0 | 8..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (0 | 8..64)) · read-write · current The encryption password. | |||||||||||||
| ChwXponDeviceOntSnmpProfileSecurityLevel | 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the trap security level. When the version of the SNMP profile is v1 or v2c, the invalid value will be returned. Options: 1. privacy(1) - Authenticate and encrypt the SNMPv3 trap packet 2. authentication(2) - Authenticate but not encrypt the SNMPv3 trap packet 3. noauthnopriv(3) - Not authenticate nor encrypt the SNMPv3 trap packet 4. invalid(255) - Invalid value
| |||||||||||||
| ThwXponDeviceOntPortClassTable | 1.3.6.1.4.1.2011.6.128.1.1.3.23 | NA | |||||||||||
table · not-accessible · current The configuration table of the XPON classification. The index of this table is a combination of hwXponDeviceOntPortClassProfileIdIndex, hwXponDeviceOntPortClassPrecedenceIndex and hwXponDeviceOntPortClassConditionIndex. | |||||||||||||
| RhwXponDeviceOntPortClassEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1 | NA | |||||||||||
row · not-accessible · current The configuration table of the XPON classification. The index of this entry is a combination of hwXponDeviceOntPortClassProfileIdIndex, hwXponDeviceOntPortClassPrecedenceIndex and hwXponDeviceOntPortClassConditionIndex. | |||||||||||||
| ChwXponDeviceOntPortClassProfileIdIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the profile index. | |||||||||||||
| ChwXponDeviceOntPortClassPrecedenceIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the precedence-rule | |||||||||||||
| ChwXponDeviceOntPortClassConditionIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the conditionindex-condition. | |||||||||||||
| ChwXponDeviceOntPortClassProfileRefNum | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the profile binding times. | |||||||||||||
| ChwXponDeviceOntPortClassProfileName | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.5 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-write · current This object indicates the profile name. | |||||||||||||
| ChwXponDeviceOntPortClassProfileQueuemapped | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the mapping queue.
The valid value range is 0~255.
The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwXponDeviceOntPortClassProfilePriMark | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the priority mark.
The valid value range is 0~7,255.
The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwXponDeviceOntPortClassProfileFieldselect | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the field selected corresponding the condition.
The value (0) indicates that the field is classified by destination MAC.
The value (1) indicates that the field is classified by source MAC.
The value (2) indicates that the field is classified by ethernet user priority.
The value (3) indicates that the field is classified by VLAN ID.
The value (4) indicates that the field is classified by ETH type.
The value (5) indicates that the field is classified by destination IPv4 address.
The value (6) indicates that the field is classified by source IPv4 address.
The value (7) indicates that the field is classified by IP protocol type.
The value (8) indicates that the field is classified by IPv4 DSCP.
The value (9) indicates that the field is classified by IPv6 DSCP.
The value (10) indicates that the field is classified by source port of layer 4 protocol.
The value (11) indicates that the field is classified by destination port of layer 4 protocol.
The value (12) indicates that the field is classified by IP version.
The value (13) indicates that the field is classified by IPv6 flow label.
The value (14) indicates that the field is classified by destination IPv6 address.
The value (15) indicates that the field is classified by source IPv6 address.
The value (16) indicates that the field is classified by prefix of destination IPv6 address.
The value (17) indicates that the field is classified by prefix of source IPv6 address.
The value (18) indicates that the field is classified by IPv6 next header.
The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwXponDeviceOntPortClassProfileOperator | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the operator flag.
The value (0) indicates that the operator flag is never match.
The value (1) indicates that the operator flag is equal.
The value (2) indicates that the operator flag is not equal.
The value (3) indicates that the operator flag is less than or equal.
The value (4) indicates that the operator flag is greater or equal.
The value (5) indicates that the operator flag is true if field exists.
The value (6) indicates that the operator flag is true if field not exist.
The value (7) indicates that the operator flag is always match.
The value (-1) indicates that the query fails or no information is detected | |||||||||||||
| ChwXponDeviceOntPortClassProfileMatchValue | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.10 | OCTET STRING (SIZE (1..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (1..64)) · read-write · current This object indicates the match values. | |||||||||||||
| ChwXponDeviceOntPortClassProfileRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.11 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwXponDeviceOntPortClassProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwEponDeviceLineProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.41 | NA | |||||||||||
table · not-accessible · current This is the EPON line profile table. This table is used to create a EPON line profile. The index of this table is hwEponDeviceLineProfileInfoNameIndex. | |||||||||||||
| RhwEponDeviceLineProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.41.1 | NA | |||||||||||
row · not-accessible · current This is the EPON line profile table. This table is used to create a EPON line profile. The index of this entry is hwEponDeviceLineProfileInfoNameIndex. | |||||||||||||
| ChwEponDeviceLineProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the EPON line profile name index. | |||||||||||||
| ChwEponDeviceLineProfileBindNum | 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of ONT bound with EPON line profile. | |||||||||||||
| ChwEponDeviceLineProfileFEC | 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the EPON line profile FEC switch. Options: 1. enable (1) - Enable the EPON line profile FEC switch 2. disable (2) - Disable the EPON line profile FEC switch 3. invalid (-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceLineProfileCommit | 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the EPON line profile configuration commit. Options: 1. commitExecute(1) - Execute the EPON line profile configuration commit 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceLineProfileRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwEponDeviceLineProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwEponDeviceLineProfileTr069ManagementIpIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The index of IP host which used by TR069. | |||||||||||||
| ThwEponDeviceLineProfLlidCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.42 | NA | |||||||||||
table · not-accessible · current This is the XPON line profile LLID config table. This table is used to configure epon LLID. The index of this table is a combination of hwEponLineProfLlidCfgLineProfNameIndex, and hwEponLineProfLlidCfgLlidIndex. | |||||||||||||
| RhwEponDeviceLineProfLlidCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1 | NA | |||||||||||
row · not-accessible · current This is the XPON line profile LLID config table. This table is used to configure epon LLID. The index of this entry is a combination of hwEponLineProfLlidCfgLineProfNameIndex, and hwEponLineProfLlidCfgLlidIndex. | |||||||||||||
| ChwEponLineProfLlidCfgLineProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON line profile name index. | |||||||||||||
| ChwEponLineProfLlidCfgLlidIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.2 | Integer32 (0..1023) | NA | ||||||||||
column · Integer32 (0..1023) · not-accessible · current This object indicates the XPON line profile LLID config Llid index. | |||||||||||||
| ChwEponLineProfLlidCfgCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.3 | Integer32 (1..1024 | 65534) | RW | ||||||||||
column · Integer32 (1..1024 | 65534) · read-write · current This object indicates the XPON line profile LLID config car profile index(1~1024, 0xfffe-unconcern). | |||||||||||||
| ChwEponLineProfLlidCfgDbaProfileName | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.4 | OCTET STRING (SIZE (0..33)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..33)) · read-write · current This object indicates the XPON line profile LLID config DBA profile name. | |||||||||||||
| ChwEponLineProfLlidCfgEncryptMode | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON line profile LLID config gem encryp mode. Options: 1. aes128(1) - Indicates that the XPON line profile LLID config gem encrypt mode is aes128 2. triplechurning(2) - Indicates that the XPON line profile LLID config gem encrypt mode is triple churning 3. off(3) - Indicates that the XPON line profile LLID config gem encrypt mode is off
| |||||||||||||
| ChwEponLineProfLlidCfgQueueSetIndex1ReportBitMap | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON line profile LLID config queue-set-1 report bitmap. | |||||||||||||
| ChwEponLineProfLlidCfgQueueSetIndex1Threshold | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.7 | OCTET STRING (SIZE (16)) | RW | ||||||||||
column · OCTET STRING (SIZE (16)) · read-write · current This object indicates the XPON line profile LLID config queue-set-1 threshold value. | |||||||||||||
| ChwEponLineProfLlidCfgQueueSetIndex2ReportBitMap | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON line profile LLID config queue-set-2 report bitmap. | |||||||||||||
| ChwEponLineProfLlidCfgQueueSetIndex2Threshold | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.9 | OCTET STRING (SIZE (16)) | RW | ||||||||||
column · OCTET STRING (SIZE (16)) · read-write · current This object indicates the XPON line profile LLID config queue-set-2 threshold value. | |||||||||||||
| ChwEponLineProfLlidCfgQueueSetIndex3ReportBitMap | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON line profile LLID config queue-set-3 report bitmap. | |||||||||||||
| ChwEponLineProfLlidCfgQueueSetIndex3Threshold | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.11 | OCTET STRING (SIZE (16)) | RW | ||||||||||
column · OCTET STRING (SIZE (16)) · read-write · current This object indicates the XPON line profile LLID config queue-set-3 threshold value. | |||||||||||||
| ChwEponLineProfLlidCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.12 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwEponLineProfLlidCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwEponLineProfLlidCfgCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.13 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the XPON line profile LLID config car profile name. | |||||||||||||
| ThwEponDeviceSrvProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.43 | NA | |||||||||||
table · not-accessible · current This is the EPON service profile table. The index of this table is hwEponDeviceSrvProfileInfoNameIndex. | |||||||||||||
| RhwEponDeviceSrvProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.43.1 | NA | |||||||||||
row · not-accessible · current This is the EPON service profile table. The index of this entry is hwEponDeviceSrvProfileInfoNameIndex. | |||||||||||||
| ChwEponDeviceSrvProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.43.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the EPON line profile name index. | |||||||||||||
| ChwEponDeviceSrvProfileBindNum | 1.3.6.1.4.1.2011.6.128.1.1.3.43.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of ONT bound with EPON service profile. | |||||||||||||
| ChwEponDeviceSrvProfileCommit | 1.3.6.1.4.1.2011.6.128.1.1.3.43.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the EPON service profile configuration commit. Options: 1. commitExecute(1) - Execute the EPON service profile configuration commit 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceSrvProfileRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.43.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwEponDeviceSrvProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwEponDeviceSrvProfileOntCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.44 | NA | |||||||||||
table · not-accessible · current This is the EPON service profile ont config table. The index of this table is hwEponDeviceSrvProfOntCfgSrvProfNameIndex. | |||||||||||||
| RhwEponDeviceSrvProfileOntCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1 | NA | |||||||||||
row · not-accessible · current This is the EPON service profile ont config table. The index of this entry is hwEponDeviceSrvProfOntCfgSrvProfNameIndex. | |||||||||||||
| ChwEponDeviceSrvProfOntCfgSrvProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the EPON service profile name index. | |||||||||||||
| ChwEponDeviceSrvProfilePotsNum | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile pots port number. A special value of 0xFE (254) indicates the number of port is adaptive. | |||||||||||||
| ChwEponDeviceSrvProfileEthNum | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile eth port number. A special value of 0xFE (254) indicates the number of port is adaptive. | |||||||||||||
| ChwEponDeviceSrvProfileTdmPortNum | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile tdm port number. | |||||||||||||
| ChwEponDeviceSrvProfileTdmPortType | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile tdm port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceSrvProfileMulticastMode | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile multicast mode. Options: 1. ctc(1) - Indicates that the XPON service profile multicast mode is CTC 2. igmpsnooping(2) - Indicates that the XPON service profile multicast mode is igmp snooping 3. transparent(3) - Indicates that the XPON service profile multicast mode is transparent 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceSrvProfileMulticastQuickLeaveSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile multicast quick leave switch. Options: 1. enable(1) - Enable the XPON service profile multicast quick leave switch 2. disable(2) - Disable the XPON service profile multicast quick leave switch 3. unconcern(254) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceSrvProfileRingCheckSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile ring check function switch. Options: 1. enable(1) - Enable the XPON service profile ring check function switch 2. disable(2) - Disable the XPON service profile ring check function switch 3. unconcern(254) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceSrvProfileRingCheckAutoShutdownSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile ring check auto shutdown function switch Options: 1. enable(1) - Indicates that the XPON service profile ring check auto shutdown switch enable. 2. disable(2) - Indicates that the XPON service profile ring check auto shutdown switch disable. 3. unconcern(254) - Indicates that the XPON service profile ring check auto shutdown switch unconcern.
| |||||||||||||
| ChwEponDeviceSrvProfileMaxNumOfAdapPotsPort | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the max number of adaptive pots ports. Range: 1-32. 32 is default value. | |||||||||||||
| ChwEponDeviceSrvProfileMaxNumOfAdapEthPort | 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the max number of adaptive eth ports. Range: 1-24. 8 is default value. | |||||||||||||
| ThwEponDeviceSrvProfMulticastVlanCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.45 | NA | |||||||||||
table · not-accessible · current This is the EPON service profile multicast vlan config table. The index of this table is a combination of hwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndex, hwEponDeviceSrvProfMulticastVlanCfgOntPhyType, hwEponDeviceSrvProfMulticastVlanCfgOntPhyIndex and hwEponDeviceSrvProfMulticastVlanCfgMulticastVlan. | |||||||||||||
| RhwEponDeviceSrvProfMulticastVlanCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.45.1 | NA | |||||||||||
row · not-accessible · current This is the EPON service profile multicast vlan config table. The index of this entry is a combination of hwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndex, hwEponDeviceSrvProfMulticastVlanCfgOntPhyType, hwEponDeviceSrvProfMulticastVlanCfgOntPhyIndex and hwEponDeviceSrvProfMulticastVlanCfgMulticastVlan. | |||||||||||||
| ChwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON service profile name index. | |||||||||||||
| ChwEponDeviceSrvProfMulticastVlanCfgOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. moca(46) - MOCA 6. eth(47) - ETH 7. iphost(50) - IPHOST
| |||||||||||||
| ChwEponDeviceSrvProfMulticastVlanCfgOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port index of the ONT | |||||||||||||
| ChwEponDeviceSrvProfMulticastVlanCfgMulticastVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.4 | Integer32 (1..4093) | NA | ||||||||||
column · Integer32 (1..4093) · not-accessible · current This object indicates the EPON service profile multicast vlan. | |||||||||||||
| ChwEponDeviceSrvProfMulticastVlanCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwEponDeviceSrvProfMulticastVlanCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwEponDeviceSrvProfMulticastVlanCfgTranslatedVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.6 | Integer32 (-1 | 1..4093) | RW | ||||||||||
column · Integer32 (-1 | 1..4093) · read-write · current This object indicates the EPON service profile multicast translated VLAN. | |||||||||||||
| ThwEponDeviceSrvProfPortVlanCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.46 | NA | |||||||||||
table · not-accessible · current This is the EPON service profile port vlan config table. The index of this table is a combination of hwEponDeviceSrvProfPortVlanCfgSrvProfNameIndex, hwEponDeviceSrvProfPortVlanCfgOntPhyType, hwEponDeviceSrvProfPortVlanCfgOntPhyIndex and hwEponDeviceSrvProfPortVlanCfgPortCVlan. | |||||||||||||
| RhwEponDeviceSrvProfPortVlanCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.46.1 | NA | |||||||||||
row · not-accessible · current This is the EPON service profile port vlan config table. The index of this entry is a combination of hwEponDeviceSrvProfPortVlanCfgSrvProfNameIndex, hwEponDeviceSrvProfPortVlanCfgOntPhyType, hwEponDeviceSrvProfPortVlanCfgOntPhyIndex and hwEponDeviceSrvProfPortVlanCfgPortCVlan. | |||||||||||||
| ChwEponDeviceSrvProfPortVlanCfgSrvProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON service profile name index. | |||||||||||||
| ChwEponDeviceSrvProfPortVlanCfgOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. moca(46) - MOCA 6. eth(47) - ETH 7. iphost(50) - IPHOST
| |||||||||||||
| ChwEponDeviceSrvProfPortVlanCfgOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port index of the ONT. | |||||||||||||
| ChwEponDeviceSrvProfPortVlanCfgPortVlanType | 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile port vlan type. Options: 1. transparent(1) - Indicates that the XPON service profile port vlan type is transparent 2. translation(2) - Indicates that the XPON service profile port vlan type is translation 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceSrvProfPortVlanCfgPortCVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.5 | Integer32 (1..4094 | 65534) | NA | ||||||||||
column · Integer32 (1..4094 | 65534) · not-accessible · current This object indicates the EPON service profile port customer vlan. The value 65534 indicates that the vlan mode of ont's port is transparent. | |||||||||||||
| ChwEponDeviceSrvProfPortVlanCfgPortSVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.6 | Integer32 (-1 | 1..4094) | RW | ||||||||||
column · Integer32 (-1 | 1..4094) · read-write · current This object indicates the EPON service profile port service vlan. The value(-1) is invalid value. | |||||||||||||
| ChwEponDeviceSrvProfPortVlanCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.7 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwEponDeviceSrvProfPortVlanCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwEponDeviceSrvProfOntPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.47 | NA | |||||||||||
table · not-accessible · current This is the EPON service profile ont port config table. The index of this table is a combination of hwEponDeviceSrvProfOntPortCfgSrvProfNameIndex, hwEponDeviceSrvProfOntPortCfgOntPhyType and hwEponDeviceSrvProfOntPortCfgOntPhyIndex. | |||||||||||||
| RhwEponDeviceSrvProfOntPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1 | NA | |||||||||||
row · not-accessible · current This is the EPON service profile ont port config table. The index of this entry is a combination of hwEponDeviceSrvProfOntPortCfgSrvProfNameIndex, hwEponDeviceSrvProfOntPortCfgOntPhyType and hwEponDeviceSrvProfOntPortCfgOntPhyIndex. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgSrvProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON service profile name index. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. moca(46) - MOCA 6. eth(47) - ETH 7. iphost(50) - IPHOST
| |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port index of the ONT. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile ont port up-stream car profile id. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile ont port down-stream car profile id. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgMaxMacAddressNum | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile ont port max mac-address number. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgClassProfileIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile port config class profile index. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgMulticastStripSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile multicast strip switch. Options: 1. tag(1) - Indicates that the XPON service profile multicast strip switch is tag 2. untag(2) - Indicates that the XPON service profile multicast strip switch is untag 3. translation(3) - Indicates that the XPON service profile multicast strip switch is translation 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgMaxGroupNum | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the max multicast group num on port. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.10 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the XPON service profile ont port up-stream car profile name. | |||||||||||||
| ChwEponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.11 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the XPON service profile ont port down-stream car profile name. | |||||||||||||
| ThwGponDeviceLineProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.61 | NA | |||||||||||
table · not-accessible · current This is the GPON line profile table. This table is used to create a GPON line profile. The index of this table is hwGponDeviceLineProfileInfoNameIndex. | |||||||||||||
| RhwGponDeviceLineProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1 | NA | |||||||||||
row · not-accessible · current This is the GPON line profile table. This table is used to create a GPON line profile. The index of this entry is hwGponDeviceLineProfileInfoNameIndex. | |||||||||||||
| ChwGponDeviceLineProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the GPON line profile name index. | |||||||||||||
| ChwGponDeviceLineProfileBindNum | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of ONT bound with GPON line profile. | |||||||||||||
| ChwGponDeviceLineProfileUpFEC | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON line profile upstream FEC. Options: 1. enable (1) - Enable the GPON line profile upstream FEC 2. disable (2) - Disable the GPON line profile upstream FEC
| |||||||||||||
| ChwGponDeviceLineProfileMappingMode | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON line profile mapping mode. Options: 1. vlan(1) - The GPON line profile mapping mode is vlan 2. pri8021p(2) - The GPON line profile mapping mode is 802.1p 3. vlanpri(3) - The GPON line profile mapping mode is vlan and 802.1p 4. port(4) - The GPON line profile mapping mode is port 5. vlanport(5) - The GPON line profile mapping mode is vlan and port 6. portpri(6) - The GPON line profile mapping mode is port and 802.1p 7. vlanpriport(7) - The GPON line profile mapping mode is vlan, port and 802.1p 8. e1t1(8) - The GPON line profile mapping mode is the port of e1 and t1 9. iptos(9) - The GPON line profile mapping mode is iptos 10. vlaniptos(10) - The GPON line profile mapping mode is vlan and iptos 11. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceLineProfileQosMode | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON line profile QOS mode. Options: 1. pq(1) - The GPON line profile QOS mode is PQ 2. gemcar(2) - The GPON line profile QOS mode is the gemcar 3. flowcar(3) - The GPON line profile QOS mode is the flowcar
| |||||||||||||
| ChwGponDeviceLineProfileCommit | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON Line Profile Configuration Commit. Options: 1. commitExecute(1) - Execute the GPON line profile configuration commit 2. clearResult(2) - Clear the commit result 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceLineProfileRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.7 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceLineProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwGponDeviceLineProfileOMCCEncrypt | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON line profile OMCC downstream encrypt status. Options: 1. on(1) - Indicates that the GPON line profile OMCC downstream encrypt status is on 2. off(2) - Indicates that the GPON line profile OMCC downstream encrypt status is off
| |||||||||||||
| ChwGponDeviceLineProfileTr069ManagementSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON line profile tr069 management status. Options: 1. enable(1) - Enable the GPON line profile tr069 management status 2. disable(2) - Disable the GPON line profile tr069 management status
| |||||||||||||
| ChwGponDeviceLineProfileCommitResult | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates the commit result of a GPON line profile, the aging time of the result is 20s. Options: 1. success(1) - Indicates that the commit result is success 2. fail(2) - Indicates that the commit result is fail 3. operating(3) - Indicates that the commit does not complete 4. invalid(-1) - Indicates that no commit is being operated
| |||||||||||||
| ChwGponDeviceLineProfileTr069ManagementIpIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The index of IP host which used by TR069. | |||||||||||||
| ThwGponDeviceLineProfTcontCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.62 | NA | |||||||||||
table · not-accessible · current This is the XPON line profile tcont config table. This table is used to configure tcont. The index of this table is a combination of hwGponDeviceLineProfTcontCfgLineProfNameIndex, and hwGponDeviceLineProfTcontCfgTcontIndex. | |||||||||||||
| RhwGponDeviceLineProfTcontCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.62.1 | NA | |||||||||||
row · not-accessible · current This is the XPON line profile tcont config table. This table is used to configure tcont. The index of this entry is a combination of hwGponDeviceLineProfTcontCfgLineProfNameIndex, and hwGponDeviceLineProfTcontCfgTcontIndex. | |||||||||||||
| ChwGponDeviceLineProfTcontCfgLineProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.62.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON line profile name index. | |||||||||||||
| ChwGponDeviceLineProfTcontCfgTcontIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.62.1.2 | Integer32 (0..127) | NA | ||||||||||
column · Integer32 (0..127) · not-accessible · current This object indicates the XPON line profile tcont index. | |||||||||||||
| ChwGponDeviceLineProfTcontCfgDbaProfileName | 1.3.6.1.4.1.2011.6.128.1.1.3.62.1.3 | OCTET STRING (SIZE (0..33)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..33)) · read-write · current This object indicates the XPON line profile tcont config DBA profile name. | |||||||||||||
| ChwGponDeviceLineProfTcontCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.62.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceLineProfTcontCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwGponDeviceLineProfGemCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.63 | NA | |||||||||||
table · not-accessible · current This is the XPON line profile gem config table. This table is used to configure gem. The index of this table is a combination of hwGponDeviceLineProfGemCfgLineProfNameIndex and hwGponDeviceLineProfGemCfgGemIndex. | |||||||||||||
| RhwGponDeviceLineProfGemCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1 | NA | |||||||||||
row · not-accessible · current This is the XPON line profile gem config table. This table is used to configure gem. The index of this entry is a combination of hwGponDeviceLineProfGemCfgLineProfNameIndex and hwGponDeviceLineProfGemCfgGemIndex. | |||||||||||||
| ChwGponDeviceLineProfGemCfgLineProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON line profile name index. | |||||||||||||
| ChwGponDeviceLineProfGemCfgGemIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.2 | Integer32 (0..1023) | NA | ||||||||||
column · Integer32 (0..1023) · not-accessible · current This object indicates the XPON line profile gem config gem index. | |||||||||||||
| ChwGponDeviceLineProfGemCfgCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.3 | Integer32 (-1 | 1..1024) | RW | ||||||||||
column · Integer32 (-1 | 1..1024) · read-write · current This object indicates the XPON line profile gem config car profile index. | |||||||||||||
| ChwGponDeviceLineProfGemCfgTcontIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.4 | Integer32 (-1 | 0..127) | RW | ||||||||||
column · Integer32 (-1 | 0..127) · read-write · current This object indicates the XPON line profile gem config bind tcont index. | |||||||||||||
| ChwGponDeviceLineProfGemCfgServiceType | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON line profile gem config gem service type. Options: 1. eth(1) - ETH 2. tdm(2) - TDM
| |||||||||||||
| ChwGponDeviceLineProfGemCfgEncryptMode | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON line profile gem config gem encrypt mode. Options: 1. on(1) - Indicates that the XPON line profile gem config gem encrypt mode is on 2. off(2) - Indicates that the XPON line profile gem config gem encrypt mode is off
| |||||||||||||
| ChwGponDeviceLineProfGemCfgCascadeMode | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON line profile gem config gem cascade switch. Options: 1. on(1) - Indicates that the XPON line profile gem config gem cascade switch is on 2. off(2) - Indicates that the XPON line profile gem config gem cascade switch is off
| |||||||||||||
| ChwGponDeviceLineProfGemCfgUpPQIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.8 | Integer32 (-1 | 0..7) | RW | ||||||||||
column · Integer32 (-1 | 0..7) · read-write · current This object indicates the XPON line profile gem config up stream PQ index. | |||||||||||||
| ChwGponDeviceLineProfGemCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.9 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceLineProfGemCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwGponDeviceLineProfGemCfgDownPQIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.10 | Integer32 (-1 | 0..7 | 254) | RW | ||||||||||
column · Integer32 (-1 | 0..7 | 254) · read-write · current This object indicates the XPON line profile gem config down stream PQ index. 0..7: Down Stream PQ index, 254 : Apaptive, Gemport Down Stream PQ is decided by ont. -1 : Default Value.Gemport Down Stream PQ is decided by olt. | |||||||||||||
| ChwGponDeviceLineProfGemCfgCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.11 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the XPON line profile gem config car profile name. | |||||||||||||
| ThwGponDeviceLineProfMappingCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.64 | NA | |||||||||||
table · not-accessible · current This is the XPON line profile flow config table. This table is used to configure gem mapping to service. The index of this table is a combination of hwGponDeviceLineProfMappingCfgLineProfNameIndex, hwGponDeviceLineProfMappingCfgGemIndex and hwGponDeviceLineProfMappingCfgMappingIndex. | |||||||||||||
| RhwGponDeviceLineProfMappingCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1 | NA | |||||||||||
row · not-accessible · current This is the XPON line profile flow config table. This table is used to configure gem mapping to service. The index of this entry is a combination of hwGponDeviceLineProfMappingCfgLineProfNameIndex, hwGponDeviceLineProfMappingCfgGemIndex and hwGponDeviceLineProfMappingCfgMappingIndex. | |||||||||||||
| ChwGponDeviceLineProfMappingCfgLineProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON line profile name index. | |||||||||||||
| ChwGponDeviceLineProfMappingCfgGemIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.2 | Integer32 (0..1023) | NA | ||||||||||
column · Integer32 (0..1023) · not-accessible · current This object indicates the XPON line profile mapping config gem index. | |||||||||||||
| ChwGponDeviceLineProfMappingCfgMappingIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.3 | Integer32 (0..7) | NA | ||||||||||
column · Integer32 (0..7) · not-accessible · current This object indicates the XPON line profile mapping config flow index. | |||||||||||||
| ChwGponDeviceLineProfMappingCfgMappingMode | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON line profile mapping config mapping mode. Options: 1. vlan(1) - The XPON line profile mapping mode is vlan 2. pri8021p(2) - The XPON line profile mapping mode is 802.1p 3. vlanpri(3) - The XPON line profile mapping mode is vlan and 802.1p 4. port(4) - The XPON line profile mapping mode is port 5. vlanport(5) - The XPON line profile mapping mode is vlan and port 6. portpri(6) - The XPON line profile mapping mode is port and 802.1p 7. vlanpriport(7) - The XPON line profile mapping mode is vlan, port and 802.1p 8. e1t1port(8) - The XPON line profile mapping mode is the port of e1 and t1 9. iptos(9) - The XPON line profile mapping mode is iptos 10. vlaniptos(10) - The XPON line profile mapping mode is vlan and iptos 11. invalid(-1) - Indicates that the mapping port type is tdm-vcl
| |||||||||||||
| ChwGponDeviceLineProfMappingCfgCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.5 | Integer32 (-1 | 1..1024) | RW | ||||||||||
column · Integer32 (-1 | 1..1024) · read-write · current This object indicates the XPON line profile mapping config car profile index. | |||||||||||||
| ChwGponDeviceLineProfMappingCfgOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. moca(46) - MOCA 7. eth(47) - ETH 8. iphost(50) - IPHOST 9. ippath(61) - Ippath 10. tdmvcl(253) - Tdmvcl 11. ethBundle(254) - EthBundle 12. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceLineProfMappingCfgOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the port index of the ONT, or the bundle-groupid when it is the eth-bundle port type. | |||||||||||||
| ChwGponDeviceLineProfMappingCfgVlanId | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.8 | Integer32 (-1 | 0..4095 | 65533) | RW | ||||||||||
column · Integer32 (-1 | 0..4095 | 65533) · read-write · current This object indicates the VLAN ID of the service. The value -1 indicates invalid VLAN ID, and 65533 indicates untag traffic stream. | |||||||||||||
| ChwGponDeviceLineProfMappingCfgVlanPriority | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.9 | Integer32 (-1 | 0..7) | RW | ||||||||||
column · Integer32 (-1 | 0..7) · read-write · current This object indicates the priority of the service. | |||||||||||||
| ChwGponDeviceLineProfMappingCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceLineProfMappingCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwGponDeviceLineProfMappingTransparent | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the flow transparent switch of the ONT. Options: 1. enable(1) - Enable the flow transparent switch of the ONT 2. disable(2) - Disable the flow transparent switch of the ONT 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceLineProfMappingCfgCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.12 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the XPON line profile mapping config car profile name. | |||||||||||||
| ThwGponDeviceSrvProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.65 | NA | |||||||||||
table · not-accessible · current This is the GPON service profile table. The index of this table is hwGponDeviceSrvProfileInfoNameIndex. | |||||||||||||
| RhwGponDeviceSrvProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.65.1 | NA | |||||||||||
row · not-accessible · current This is the GPON service profile table. The index of this entry is hwGponDeviceSrvProfileInfoNameIndex. | |||||||||||||
| ChwGponDeviceSrvProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.65.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the GPON service profile name index. | |||||||||||||
| ChwGponDeviceSrvProfileBindNum | 1.3.6.1.4.1.2011.6.128.1.1.3.65.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of ONT bound with GPON service profile. | |||||||||||||
| ChwGponDeviceSrvProfileCommit | 1.3.6.1.4.1.2011.6.128.1.1.3.65.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON service profile configuration commit. Options: 1. commitExecute(1) - Execute the GPON service profile configuration commit 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfileRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.65.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceSrvProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwGponDeviceSrvProfileOntCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.66 | NA | |||||||||||
table · not-accessible · current This is GPON service profile ont config table. The index of this table is hwGponDeviceSrvProfOntCfgSrvProfNameIndex. | |||||||||||||
| RhwGponDeviceSrvProfileOntCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1 | NA | |||||||||||
row · not-accessible · current This is GPON service profile ont config table. The index of this entry is hwGponDeviceSrvProfOntCfgSrvProfNameIndex. | |||||||||||||
| ChwGponDeviceSrvProfOntCfgSrvProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON service profile name index. | |||||||||||||
| ChwGponDeviceSrvProfilePotsNum | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile pots port number. A special value of 0xFE (254) indicates the number of port is adaptive. | |||||||||||||
| ChwGponDeviceSrvProfileEthNum | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile eth port number. A special value of 0xFE (254) indicates the number of port is adaptive. | |||||||||||||
| ChwGponDeviceSrvProfileTdmPortNum | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile tdm port number. | |||||||||||||
| ChwGponDeviceSrvProfileTdmPortType | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile tdm port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfileTdmPortSrvType | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile tdm port service type. Options: 1. tdmovergem(1) - Tdm over gem 2. cesop(2) - Cesop
| |||||||||||||
| ChwGponDeviceSrvProfileMocaNum | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile MOCA port number. | |||||||||||||
| ChwGponDeviceSrvProfileCatvNum | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile catv port number. A special value of 0xFE (254) indicates the number of port is adaptive. | |||||||||||||
| ChwGponDeviceSrvProfileMacAddressSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile mac address switch. Options: 1. enable(1) - Enable the XPON service profile mac address switch 2. disable(2) - Disable the XPON service profile mac address switch 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfileTransparentSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile transparent switch. Options: 1. enable(1) - Enable the XPON service profile transparent switch 2. disable(2) - Disable the XPON service profile transparent switch 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfileMultiSrvTransmitMode | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile igmp transmit mode. Options: 1. tagtranslation(1) - Indicates that the XPON service profile igmp transmit mode is tag translation 2. tagtransparent(2) - Indicates that the XPON service profile igmp transmit mode is tag transparent 3. untag(3) - Indicates that the XPON service profile igmp transmit mode is untag 4. unconcern(254) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfileMulticastVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.12 | Integer32 (-1 | 1..4095 | 4096) | RW | ||||||||||
column · Integer32 (-1 | 1..4095 | 4096) · read-write · current This object indicates the XPON service profile multicast vlan. value 4096 indicates IGMP-user-VLAN is used for multicast vlan. | |||||||||||||
| ChwGponDeviceSrvProfileMulticastMode | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile multicast mode. Options: 1. oltcontrol(1) - Indicates that the XPON service profile multicast mode is olt controled 2. igmpsnooping(2) - Indicates that the XPON service profile multicast mode is igmp snooping 3. unconcern(254) - Indicates that the XPON service profile multicast mode is not concerned
| |||||||||||||
| ChwGponDeviceSrvProfileUpIgmpTransmitMode | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile upstream igmp packets forward mode. Options: 1. transparent(1) - Indicates that the XPON service profile upstream igmp packets forward mode is transparent 2. translation(2) - Indicates that the XPON service profile upstream igmp packets forward mode is translation 3. default(3) - Indicates that the XPON service profile upstream igmp packets forward mode is default 4. unconcern(254) - Indicates that the XPON service profile upstream igmp packets forward mode is not concerned 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfileUpIgmpMsgTranslationVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.15 | Integer32 (-1 | 0..4095) | RW | ||||||||||
column · Integer32 (-1 | 0..4095) · read-write · current XPON service profile upstream igmp packets will be translate to the translation vlan, if upstream igmp packets forward mode is translation(2). | |||||||||||||
| ChwGponDeviceSrvProfileUpIgmpMsgPriority | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.16 | Integer32 (-1 | 0..7) | RW | ||||||||||
column · Integer32 (-1 | 0..7) · read-write · current When xpon service profile upstream igmp packets were added a vlan or translated to the translation vlan, priority was set. | |||||||||||||
| ChwGponDeviceSrvProfileNativeVlanOption | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.17 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile native VLAN. Options: 1. concern(1) - Concern the XPON service profile native VLAN 2. unconcern(2) - Unconcern the XPON service profile native VLAN
| |||||||||||||
| ChwGponDeviceSrvProfileUpPqColorPolicy | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.18 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON service profile upstream priority-queue color policy. Options: 1. noMarking(0) - Indicates that the upstream priority-queue color policy is no marking 2. dei(2) - Indicates that the upstream priority-queue color policy is DEI 3. invalid(-1) - Indicates that the upstream priority-queue color policy is invalid
| |||||||||||||
| ChwGponDeviceSrvProfileDownPqColorPolicy | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the GPON service profile downstream priority-queue color policy. Options: 1. noMarking(0) - Indicates that the downstream priority-queue color policy is no marking 2. dei(2) - Indicates that the downstream priority-queue color policy is DEI 3. invalid(-1) - Indicates that the downstream priority-queue color policy is invalid
| |||||||||||||
| ChwGponDeviceSrvProfileVdslPortNum | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.20 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile VDSL port number. A special value of 0xFE (254) indicates the number of port is adaptive. | |||||||||||||
| ChwGponDeviceSrvProfileRingCheckSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.21 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile mac address switch. Options: 1. enable(1) - Enable the XPON service profile ring check switch 2. disable(2) - Disable the XPON service profile ring check switch 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfileRingCheckAutoShutdownSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.22 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile mac address switch. Options: 1. enable(1) - Enable the XPON service profile ring check auto shutdown switch 2. disable(2) - Disable the XPON service profile ring check auto shutdown switch 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfileRingCheckDetectingFrequency | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.23 | Integer32 (1..20) | RW | ||||||||||
column · Integer32 (1..20) · read-write · current This object indicates the XPON service profile ring check detecting frequency. | |||||||||||||
| ChwGponDeviceSrvProfileRingCheckResumeInterval | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.24 | Integer32 (60..3600) | RW | ||||||||||
column · Integer32 (60..3600) · read-write · current This object indicates the XPON service profile ring check resume frequency. | |||||||||||||
| ChwGponDeviceSrvProfileMaxNumOfAdapPotsPort | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.25 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the max number of adaptive pots ports. Range: 1-32. 32 is default value. | |||||||||||||
| ChwGponDeviceSrvProfileMaxNumOfAdapEthPort | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.26 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the max number of adaptive eth ports. Range: 1-24. 8 is default value. | |||||||||||||
| ChwGponDeviceSrvProfileMaxNumOfAdapVdslPort | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.27 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the max number of adaptive vdsl ports. Range: 1-8. 8 is default value. | |||||||||||||
| ChwGponDeviceSrvProfileMaxNumOfAdapCatvPort | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.28 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the max number of adaptive catv ports. Range: 1-8. 8 is default value. | |||||||||||||
| ChwGponDeviceSrvProfileWifiPortNum | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.29 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile WiFi port number. Range: 0-4. 0 is default value. | |||||||||||||
| ChwGponDeviceSrvProfileMonitorLinkSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.30 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The switch of the ONT Monitor Link function. Options: 1. enable(1) -Enable the the ONT Monitor Link function 2. disable(2) -Disable the the ONT Monitor Link function 3. unconcern (254) -The ONT Monitor Link function is unconcern and depends on ONT Configuration.The default value is unconcern.
| |||||||||||||
| ChwGponDeviceSrvProfileMTU | 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.31 | Integer32 (-1 | 0 | 1519..9280) | RW | ||||||||||
column · Integer32 (-1 | 0 | 1519..9280) · read-write · current This object indicates the ONT MTU value. Unit:byte. The value (0) indicates that the MTU value is decided by ONT. The value (-1) indicates that the query fails or no information is detected. The default value is unconcern(0).
| |||||||||||||
| ThwGponDeviceSrvProfOntPortCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.67 | NA | |||||||||||
table · not-accessible · current This is the GPON service profile ont port config table. The index of this table is a combination of hwGponDeviceSrvProfOntPortCfgSrvProfNameIndex, hwGponDeviceSrvProfOntPortCfgOntPhyType and hwGponDeviceSrvProfOntPortCfgOntPhyIndex. | |||||||||||||
| RhwGponDeviceSrvProfOntPortCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1 | NA | |||||||||||
row · not-accessible · current This is the GPON service profile ont port config table. The index of this entry is a combination of hwGponDeviceSrvProfOntPortCfgSrvProfNameIndex, hwGponDeviceSrvProfOntPortCfgOntPhyType and hwGponDeviceSrvProfOntPortCfgOntPhyIndex. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgSrvProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current XPON service profile name index. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. moca(46) - MOCA 7. eth(47) - ETH 8. iphost(50) - IPHOST
| |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port index of the ONT. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgTDMPortCodeMode | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile tdm port coding mode. Options: 1. ami(1) - AMI 2. hdb3(2) - HDB3 3. b8zs(3) - B8ZS 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgPortQinQMode | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the QinQ mode. Options: 1. disable(1) - Disable the QinQ mode 2. enable(2) - Enable the QinQ mode 3. unconcern(254) - The QinQ mode is not concerned 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgPortPriorityPolicy | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the priority policy. Options: 1. assigned(1) - The priority policy is assigned 2. copycos(2) - The priority policy is copy CoS 3. unconcern(254) - The priority policy is not concerned 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The upstream car profile index of the ONT port. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableId | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The downstream car profile index of the ONT port. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgDscpProfIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The dscp profile index of the ONT port. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgUpIgmpTransmitMode | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the upstream igmp packets transmit mode profile of GPON ONT port. Options: 1. transparent(1) - Indicates that the GPON ONT port upstream igmp packets transmit mode profile is transparent 2. translation(2) - Indicates that the GPON ONT port upstream igmp packets transmit mode profile is translation 3. default(3) - Indicates that the GPON ONT port upstream igmp packets transmit mode profile is default 4. disable(254) - Indicates that the GPON ONT port upstream igmp packets transmit mode profile configured will be cancelled 5. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgUpIgmpMsgTranslationVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.11 | Integer32 (-1 | 0..4095) | RW | ||||||||||
column · Integer32 (-1 | 0..4095) · read-write · current The GPON ONT port upstream igmp packets will be translate to the translation vlan, if GPON ONT port upstream igmp packets forward mode is translation(2) or default(3). | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgUpIgmpMsgPriority | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.12 | Integer32 (-1 | 0..7) | RW | ||||||||||
column · Integer32 (-1 | 0..7) · read-write · current When GPON ONT port upstream igmp packets were added a vlan or translated to the translation vlan, priority was set. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgMaxMacAddressNum | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.13 | Gauge32 (0..255 | 4294967295) | RW | ||||||||||
column · Gauge32 (0..255 | 4294967295) · read-write · current This object indicates the maximum number of MAC addresses that can be learned on each ONT port. The number of MAC addresses learned on an ONT port should not greater than this number. range:0~255. 4294967295 is invalid value. 0 is default value, means unlimited. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgTDMPortTxClockMode | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the tx-clock mode of ONT TDM port. Options: 1. adapt(1) - Indicates that the tx-clock mode of the ONT TDM port is adapt 2. system(2) - Indicates that the tx-clock mode of the ONT TDM port is system 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgDownstreamMode | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the downstream mode of GPON ONT port. Options: 1. noOperation(1) - Indicates not to process the VLAN tag of the downstram packets 2. operationAndDiscardMismatch(2) - Indicates to process the VLAN tag of the downstream packets and discard the packets with mismatched VLAN tag 3. operationAndForwardMismatch(3) - Indicates to process the VLAN tag of the downstream packets and forward the packets with mismatched VLAN tag 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.16 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current The upstream car profile name of the ONT port. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableName | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.17 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current The downstream car profile name of the ONT port. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgClassProfileIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.18 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Indicates the index of the traffic classification profile configured on the ONT port. The valid value range is 1~256. The value (65534) indicates that the traffic classification profile is not bound to the port. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgUnknownUnicastRate | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.19 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the unknown unicast traffic suppression on the ONT port. The value (0~10000000) indicates the unknown unicast traffic maximum rate on the ONT port. The value (-3) indicates that the unknown unicast traffic rate on the ONT port is unlimited. The value (-2) indicates that the unknown unicast traffic suppression on the ONT port is not configured. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgBroadcastRate | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.20 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the broadcast traffic suppression on the ONT port. The value (0~10000000) indicates the broadcast traffic maximum rate on the ONT port. The value (-3) indicates that the broadcast traffic rate on the ONT port is unlimited. The value (-2) indicates that the broadcast traffic suppression on the ONT port is not configured. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgUnknownMulticastRate | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.21 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the unknown multicast traffic suppression on the ONT port. The value (0~10000000) indicates the multicast unicast traffic maximum rate on the ONT port. The value (-3) indicates that the multicast unicast traffic rate on the ONT port is unlimited. The value (-2) indicates that the multicast unicast traffic suppression on the ONT port is not configured. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponDeviceSrvProfOntPortCfgL2IsolateSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.22 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to configure Layer 2 isolation for a GPON ONT port.
The default value is unconcern(254).
Options:
1. enable(1) - Indicates that the switch is enabled
2. disable(2) - Indicates that the switch is disabled
3. unconcern(254) - Indicates that the switch is unconcern
4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponDeviceSrvProfPortVlanCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.68 | NA | |||||||||||
table · not-accessible · current This is the GPON service profile port vlan config table. The index of this table is a combination of hwGponDeviceSrvProfPortVlanCfgSrvProfNameIndex, hwGponDeviceSrvProfPortVlanCfgOntPhyType, hwGponDeviceSrvProfPortVlanCfgOntPhyIndex, hwGponDeviceSrvProfPortVlanCfgPortCVlan, hwGponDeviceSrvProfPortVlanCfgPortVlanCPri and hwGponDeviceSrvProfPortVlanCfgEtherType. | |||||||||||||
| RhwGponDeviceSrvProfPortVlanCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1 | NA | |||||||||||
row · not-accessible · current This is the GPON service profile port vlan config table. The index of this entry is a combination of hwGponDeviceSrvProfPortVlanCfgSrvProfNameIndex, hwGponDeviceSrvProfPortVlanCfgOntPhyType, hwGponDeviceSrvProfPortVlanCfgOntPhyIndex, hwGponDeviceSrvProfPortVlanCfgPortCVlan, hwGponDeviceSrvProfPortVlanCfgPortVlanCPri and hwGponDeviceSrvProfPortVlanCfgEtherType. | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgSrvProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON service profile name index. | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. wifi(40) - WiFi 7. moca(46) - MOCA 8. eth(47) - ETH 9. iphost(50) - IPHOST
| |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port index of the ONT. | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgPortCVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.4 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the user-side VLAN of port on the GPON service profile. Options: 1.user-vlan(0~4095) - Indicates the VLAN for user-side packets of an ONT port 2.transparent(65534) - Indicates the transparent transmission mode for packet forwarding. In this mode, packets are not processed and VLAN tags remain the same 3.untagged(65533) - Indicates that user-side packets before VLAN translation do not carry VLAN tags 4.other-all(65532) - Indicates that user-side packets before VLAN translation are ones that cannot be matched by specified VLAN or untagged VLAN 5.invalid(-1) - Indicates that there is no VLAN translation, or this port is not in VLAN translation mode, for example, user-side packets is in priority translation mode, not concerned VLAN ID. | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceSrvProfPortVlanCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgPortVlanType | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the XPON service profile port vlan type. Options: 1. transparent(1) - Indicates that the XPON service profile port vlan type is transparent 2. translation(2) - Indicates that the XPON service profile port vlan type is translation 3. qinq(3) - Indicates that the XPON service profile port vlan type is qinq 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgPortVlanSPri | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.7 | Integer32 (-1 | 0..7) | RW | ||||||||||
column · Integer32 (-1 | 0..7) · read-write · current This object indicates the GPON service profile port translation or qinq s-priority | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgPortSVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.8 | Integer32 (-1 | 0..4095) | RW | ||||||||||
column · Integer32 (-1 | 0..4095) · read-write · current This object indicates the GPON service profile port service vlan. | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgPortVlanCPri | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.9 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the GPON service profile port translation or qinq c-priority. | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgEtherType | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON service profile customer service encapsulation type. Options: 1. ipv4-ipoe(1) - Indicates that the XPON service profile customer service encapsulation type is ipv4 ipoe 2. pppoe(2) - Indicates that the XPON service profile customer service encapsulation type is pppoe 3. ipv6-ipoe(4) - Indicates that the XPON service profile customer service encapsulation type is ipv6 ipoe 4. invalid(-1) - Indicates that the query fails or no information is detected 5. 0x600-0xffff - Indicates that the XPON service profile customer service encapsulation type is user-defined | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgPortVlanSPriPolicy | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the s-vlan priority policy. Options: 1. specify(1) - Indicates that the s-vlan priority policy is specified 2. userCos(2) - Indicates that the s-vlan priority policy is userCos 3. dscpMapping(3) - Indicates that the s-vlan priority policy is dscpMapping 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgDscpDefaultPriority | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the default priority for dscpMapping policy. | |||||||||||||
| ChwGponDeviceSrvProfPortVlanCfgPortVlanTlsSwitch | 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The switch used to config the attribute of vlan translation. Options: 1. off(1) - Indicates that the attribute of vlan translation is off 2. on(2) - Indicates that the attribute of vlan translation is on 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponDeviceAlarmProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.69 | NA | |||||||||||
table · not-accessible · current This is the GPON alarm profile table. The index of this table is hwGponDeviceAlarmProfileInfoNameIndex. | |||||||||||||
| RhwGponDeviceAlarmProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1 | NA | |||||||||||
row · not-accessible · current This is the GPON alarm profile table. The index of this entry is hwGponDeviceAlarmProfileInfoNameIndex. | |||||||||||||
| ChwGponDeviceAlarmProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.1 | OCTET STRING (SIZE (1..33)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..33)) · not-accessible · current This object indicates the alarm profile name. | |||||||||||||
| ChwGponDeviceAlarmProfileBindNum | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the binding times of the profile. | |||||||||||||
| ChwGponDeviceAlarmProfileLostPacketsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the loss of frames threshold of GEM port. | |||||||||||||
| ChwGponDeviceAlarmProfileMisinsertedPacketsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the mis-inserted frames threshold of GEM port. | |||||||||||||
| ChwGponDeviceAlarmProfileImpairedBlocksThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the impaired blocks alarm threshold of GEM port. | |||||||||||||
| ChwGponDeviceAlarmProfileFCSErrorsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the Ethernet FCS errors alarm threshold. | |||||||||||||
| ChwGponDeviceAlarmProfileExcessiveCollisionCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ethernet excessive collision count alarm threshold. | |||||||||||||
| ChwGponDeviceAlarmProfileLateCollisionCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the ethernet late collision count alarm threshold within 512 bit-times. | |||||||||||||
| ChwGponDeviceAlarmProfileFrameTooLongsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the too long Ethernet frames alarm threshold. | |||||||||||||
| ChwGponDeviceAlarmProfileBufferOverflowsonReceiveThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the Ethernet buffer received overflows alarm threshold. | |||||||||||||
| ChwGponDeviceAlarmProfileBufferOverflowsonTransmitThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of transmit buffer overflows. | |||||||||||||
| ChwGponDeviceAlarmProfileSingleCollisionFrameCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates alarm threshold of the Ethernet single collision frame count. | |||||||||||||
| ChwGponDeviceAlarmProfileMultipleCollisionsFrameCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.13 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of Ethernet multiple collisions frame count. | |||||||||||||
| ChwGponDeviceAlarmProfileSQECounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.14 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of Ethernet SQE test error messages count. | |||||||||||||
| ChwGponDeviceAlarmProfileDeferredTransmissionCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.15 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of the deferred frames count. | |||||||||||||
| ChwGponDeviceAlarmProfileInternalmactransmiterrorcounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.16 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of transmit errors at the MAC sub-layer. | |||||||||||||
| ChwGponDeviceAlarmProfileCarrierSenseErrorCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.17 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of carrier sense errors. | |||||||||||||
| ChwGponDeviceAlarmProfileAlignmentErrorCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.18 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of frame alignment errors. | |||||||||||||
| ChwGponDeviceAlarmProfileInternalMACReceiveErrorCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.19 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of receive errors at the MAC sub-layer. | |||||||||||||
| ChwGponDeviceAlarmProfilePPPoEFilteredFrameCounterThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.20 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of filtered PPPoE frames. | |||||||||||||
| ChwGponDeviceAlarmProfileDelayExceededDiscardThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.21 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of frames discarded due to timeout. | |||||||||||||
| ChwGponDeviceAlarmProfileMTUExceededDiscardThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.22 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of frames dropped due to excessive MTU. | |||||||||||||
| ChwGponDeviceAlarmProfileReceivedAndDiscardedThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.23 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of received error frames. | |||||||||||||
| ChwGponDeviceAlarmProfileCESErrorSecondsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.26 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of CES errored seconds. | |||||||||||||
| ChwGponDeviceAlarmProfileCESSeverelyErrorSecondsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.27 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of CES severely errored seconds. | |||||||||||||
| ChwGponDeviceAlarmProfileCESBurstyErrorSecondsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.28 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of CES bursty errored seconds. | |||||||||||||
| ChwGponDeviceAlarmProfileCESUnavailableSecondsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.29 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of CES unavailable seconds. | |||||||||||||
| ChwGponDeviceAlarmProfileCESControlledSlipSecondsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.30 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of CES controlled slip seconds. | |||||||||||||
| ChwGponDeviceAlarmProfileDropEventsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.31 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of discarded packets. | |||||||||||||
| ChwGponDeviceAlarmProfileUndersizepacketsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.32 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of undersized packets. | |||||||||||||
| ChwGponDeviceAlarmProfileFragmentsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.33 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of fragments. | |||||||||||||
| ChwGponDeviceAlarmProfileJabbersThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.34 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the alarm threshold of jabbers. | |||||||||||||
| ChwGponDeviceAlarmProfileFailedSignalOfOnuThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.35 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the threshold of ONT signal failures(Format:1e-x).,range:3~8 for example: if the value of the leaf is 3,the actual value is 0.001, if the value of the leaf is 8,the actual value is 0.00000001 | |||||||||||||
| ChwGponDeviceAlarmProfileDegradedSignalOfOnuThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.36 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the threshold of ONT degraded signals(Format:1e-x),range:4~9 for example: if the value of the leaf is 4,the actual value is 0.0001, if the value of the leaf is 9,the actual value is 0.000000001. | |||||||||||||
| ChwGponDeviceAlarmProfileFECUncorrectCodeWordsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.37 | Gauge32 (0..1101600000 | 4294967295) | RW | ||||||||||
column · Gauge32 (0..1101600000 | 4294967295) · read-write · current This object indicates the threshold of the code words that were not corrected by the FEC function, range:0~1101600000. 4294967295 is invalid value. | |||||||||||||
| ChwGponDeviceAlarmProfileFECCorrectCodeWordsThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.38 | Gauge32 (0..1101600000 | 4294967295) | RW | ||||||||||
column · Gauge32 (0..1101600000 | 4294967295) · read-write · current This object indicates the threshold of the code words that were corrected by the FEC function, range:0~1101600000. 4294967295 is invalid value. | |||||||||||||
| ChwGponDeviceAlarmProfileUpstreamPQDiscardedBytesThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.39 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Upstream PQ discarded byte alarm threshold, range:0~65535. If this parameter is set to an invalid value 0, the PQ alarm statistics function is disabled. | |||||||||||||
| ChwGponDeviceAlarmProfileDownstreamPQDiscardedBytesThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.40 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Downstream PQ discarded byte alarm threshold, range:0~65535. If this parameter is set to an invalid value 0, the PQ alarm statistics function is disabled. | |||||||||||||
| ChwGponDeviceAlarmProfileRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.50 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwGponDeviceAlarmProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwGponDeviceAlarmProfileEncryptionKeyErrorsOfOnuThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.51 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Encryption key errors Of Onu Threshold, range:0~100. | |||||||||||||
| ChwGponDeviceAlarmProfileXgemKeyErrorsOfOnuThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.52 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current XGEM key errors Of Onu Threshold, range:0~100. | |||||||||||||
| ChwGponDeviceAlarmProfileXgemHecErrorCountOfOnuThreshold | 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.53 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current XGEM HEC error count Of Onu Threshold,range:0~100. | |||||||||||||
| ThwXponDeviceOpticsDdmAlarmProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.70 | NA | |||||||||||
table · not-accessible · current This is the XPON optical alarm profile infomation table. The index of this table is hwXponDeviceOpticsModuleAlarmProfileInfoNameIndex. | |||||||||||||
| RhwXponDeviceOpticsDdmAlarmProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1 | NA | |||||||||||
row · not-accessible · current This is the XPON optical alarm profile infomation table. The index of this entry is hwXponDeviceOpticsModuleAlarmProfileInfoNameIndex. | |||||||||||||
| ChwXponDeviceOpticsModuleAlarmProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON optical alarm profile name index. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileBindNum | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the XPON optical alarm profile binding times. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileInfoRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwXponDeviceOpticsDdmAlarmProfileInfoRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileTxOpticAlarmUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper alarm threshold of the transmit optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileTxOpticAlarmLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower alarm threshold of the transmit optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileTxOpticWarnUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper warning threshold of the transmit optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileTxOpticWarnLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower warning threshold of the transmit optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileRxOpticAlarmUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper alarm threshold of the receive optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileRxOpticAlarmLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower alarm threshold of the receive optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileRxOpticWarnUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper warning threshold of the receive optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileRxOpticWarnLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower warning threshold of the receive optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileBiasCurrentAlarmUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper alarm threshold of the bias current. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileBiasCurrentAlarmLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.13 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower alarm threshold of the bias current. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileBiasCurrentWarnUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.14 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper warning threshold of the bias current. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileBiasCurrentWarnLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.15 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower warning threshold of the bias current. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileSupplyVoltageAlarmUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.16 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper alarm threshold of the voltage. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileSupplyVoltageAlarmLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.17 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower alarm threshold of the voltage. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileSupplyVoltageWarnUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.18 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper warning threshold of the voltage. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileSupplyVoltageWarnLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.19 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower warning threshold of the voltage. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileTemperatureAlarmUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.20 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper alarm threshold of the temperature of the optical transceiver. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileTemperatureAlarmLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.21 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower alarm threshold of the temperature of the optical transceiver. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileTemperatureWarnUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.22 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper warning threshold of the temperature of the optical transceiver. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileTemperatureWarnLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.23 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower warning threshold of the temperature of the optical transceiver. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfile10GTxOpticAlarmUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.24 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper alarm threshold of the 10G transmit optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfile10GTxOpticAlarmLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.25 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower alarm threshold of the 10G transmit optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfile10GTxOpticWarnUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.26 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper warning threshold of the 10G transmit optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfile10GTxOpticWarnLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.27 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower warning threshold of the 10G transmit optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentAlarmUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.28 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper alarm threshold of the 10G bias current. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentAlarmLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.29 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower alarm threshold of the 10G bias current. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentWarnUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.30 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper warning threshold of the 10G bias current. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentWarnLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.31 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower warning threshold of the 10G bias current. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileOntCatvRxOpticAlarmUpper | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.32 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the upper alarm threshold of the ONT CATV receive optical power. | |||||||||||||
| ChwXponDeviceOpticsDdmAlarmProfileOntCatvRxOpticAlarmLower | 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.33 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the lower alarm threshold of the ONT CATV receive optical power. | |||||||||||||
| ThwXponDeviceLineProfEthPortBundleCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.71 | NA | |||||||||||
table · not-accessible · current This is the XPON line profile PORT-BUNDLE config table. The index of this table is a combination of hwXponDeviceLineProfEthPortBundleCfgLineProfNameIndex, and hwXponDeviceLineProfEthPortBundleCfgGroupIndex. | |||||||||||||
| RhwXponDeviceLineProfEthPortBundleCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.71.1 | NA | |||||||||||
row · not-accessible · current This is the XPON line profile PORT-BUNDLE config table. The index of this entry is a combination of hwXponDeviceLineProfEthPortBundleCfgLineProfNameIndex, and hwXponDeviceLineProfEthPortBundleCfgGroupIndex. | |||||||||||||
| ChwXponDeviceLineProfEthPortBundleCfgLineProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.71.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON line profile name index. | |||||||||||||
| ChwXponDeviceLineProfEthPortBundleCfgGroupIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.71.1.2 | Integer32 (1..8) | NA | ||||||||||
column · Integer32 (1..8) · not-accessible · current This object indicates the XPON line profile PORT-BUNDLE config bundle gproup index. | |||||||||||||
| ChwXponDeviceLineProfEthPortBundleCfgPortBitMap | 1.3.6.1.4.1.2011.6.128.1.1.3.71.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON line profile PORT-BUNDLE config bundle port bitmap, support 32 ports, and the lowest bit indicates the port 1. | |||||||||||||
| ChwXponDeviceLineProfEthPortBundleCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.71.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwXponDeviceLineProfEthPortBundleCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwXponDeviceSLAProfileInfoTable | 1.3.6.1.4.1.2011.6.128.1.1.3.72 | NA | |||||||||||
table · not-accessible · current This is the XPON SLA profile infomation table. The index of this table is hwXponDeviceSLAProfileInfoNameIndex. | |||||||||||||
| RhwXponDeviceSLAProfileInfoEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1 | NA | |||||||||||
row · not-accessible · current This is the XPON SLA profile infomation table. The index of this entry is hwXponDeviceSLAProfileInfoNameIndex. | |||||||||||||
| ChwXponDeviceSLAProfileInfoNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the name of the SLA profile. | |||||||||||||
| ChwXponDeviceSLAProfileCycleLength | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.2 | Integer32 (200..16777215) | RW | ||||||||||
column · Integer32 (200..16777215) · read-write · current This object indicates the cycle length. | |||||||||||||
| ChwXponDeviceSLAProfileServiceNum | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.3 | Integer32 (1..8) | RW | ||||||||||
column · Integer32 (1..8) · read-write · current This object indicates the service number. | |||||||||||||
| ChwXponDeviceSLAProfileFixedPacketSize1 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.4 | Integer32 (-1 | 0 | 64..2000) | RW | ||||||||||
column · Integer32 (-1 | 0 | 64..2000) · read-write · current This object indicates the fixed packet size of service 1. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedBandwidth1 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.5 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the fixed bandwidth of service 1. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileAssuredBandwidth1 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.6 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the assure bandwidth of service 1. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileBestEffortBandwidth1 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.7 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the best effort bandwidth of service 1. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileWrrWeight1 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.8 | Integer32 (-1 | 0..100) | RW | ||||||||||
column · Integer32 (-1 | 0..100) · read-write · current This object indicates the WRR weight of Service 1. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedPacketSize2 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.9 | Integer32 (-1 | 0 | 64..2000) | RW | ||||||||||
column · Integer32 (-1 | 0 | 64..2000) · read-write · current This object indicates the fixed packet size of service 2. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedBandwidth2 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.10 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the fixed bandwidth of service 2. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileAssuredBandwidth2 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.11 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the assure bandwidth of service 2. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileBestEffortBandwidth2 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.12 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the best effort bandwidth of service 2. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileWrrWeight2 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.13 | Integer32 (-1 | 0..100) | RW | ||||||||||
column · Integer32 (-1 | 0..100) · read-write · current This object indicates the WRR weight of service 2. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedPacketSize3 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.14 | Integer32 (-1 | 0 | 64..2000) | RW | ||||||||||
column · Integer32 (-1 | 0 | 64..2000) · read-write · current This object indicates the fixed packet size of service 3. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedBandwidth3 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.15 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the fixed bandwidth of service 3. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileAssuredBandwidth3 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.16 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the assure bandwidth of service 3. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileBestEffortBandwidth3 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.17 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the best effort bandwidth of Service 3. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileWrrWeight3 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.18 | Integer32 (-1 | 0..100) | RW | ||||||||||
column · Integer32 (-1 | 0..100) · read-write · current This object indicates the WRR weight of service 3. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedPacketSize4 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.19 | Integer32 (-1 | 0 | 64..2000) | RW | ||||||||||
column · Integer32 (-1 | 0 | 64..2000) · read-write · current This object indicates the fixed packet size of service 4. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedBandwidth4 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.20 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the fixed bandwidth of service 4. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileAssuredBandwidth4 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.21 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the assure bandwidth of service 4. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileBestEffortBandwidth4 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.22 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the best effort bandwidth of service 4. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileWrrWeight4 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.23 | Integer32 (-1 | 0..100) | RW | ||||||||||
column · Integer32 (-1 | 0..100) · read-write · current This object indicates the WRR weight of service 4. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedPacketSize5 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.24 | Integer32 (-1 | 0 | 64..2000) | RW | ||||||||||
column · Integer32 (-1 | 0 | 64..2000) · read-write · current This object indicates the fixed packet size of service 5. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedBandwidth5 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.25 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the Fixed Bandwidth of service 5. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileAssuredBandwidth5 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.26 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the assure bandwidth of service 5. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileBestEffortBandwidth5 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.27 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the best effort bandwidth of service 5. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileWrrWeight5 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.28 | Integer32 (-1 | 0..100) | RW | ||||||||||
column · Integer32 (-1 | 0..100) · read-write · current This object indicates the WRR weight of service 5. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedPacketSize6 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.29 | Integer32 (-1 | 0 | 64..2000) | RW | ||||||||||
column · Integer32 (-1 | 0 | 64..2000) · read-write · current This object indicates the fixed packet size of service 6. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedBandwidth6 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.30 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the fixed bandwidth of service 6. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileAssuredBandwidth6 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.31 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the assure bandwidth of service 6. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileBestEffortBandwidth6 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.32 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the best effort bandwidth of service 6. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileWrrWeight6 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.33 | Integer32 (-1 | 0..100) | RW | ||||||||||
column · Integer32 (-1 | 0..100) · read-write · current This object indicates the WRR weight of service 6. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedPacketSize7 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.34 | Integer32 (-1 | 0 | 64..2000) | RW | ||||||||||
column · Integer32 (-1 | 0 | 64..2000) · read-write · current This object indicates the fixed packet size of service 7. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedBandwidth7 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.35 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the fixed bandwidth of service 7. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileAssuredBandwidth7 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.36 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the assure bandwidth of service 7. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileBestEffortBandwidth7 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.37 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the best effort bandwidth of service 7. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileWrrWeight7 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.38 | Integer32 (-1 | 0..100) | RW | ||||||||||
column · Integer32 (-1 | 0..100) · read-write · current This object indicates the WRR weight of service 7. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedPacketSize8 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.39 | Integer32 (-1 | 0 | 64..2000) | RW | ||||||||||
column · Integer32 (-1 | 0 | 64..2000) · read-write · current This object indicates the fixed packet size of service 8. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileFixedBandwidth8 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.40 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the fixed bandwidth of service 8. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileAssuredBandwidth8 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.41 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the assure bandwidth of service 8. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileBestEffortBandwidth8 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.42 | Integer32 (-1 | 0..999936) | RW | ||||||||||
column · Integer32 (-1 | 0..999936) · read-write · current This object indicates the best effort bandwidth of service 8. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileWrrWeight8 | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.43 | Integer32 (-1 | 0..100) | RW | ||||||||||
column · Integer32 (-1 | 0..100) · read-write · current This object indicates the WRR weight of service 8. The value(-1) is invalid value. | |||||||||||||
| ChwXponDeviceSLAProfileEntryStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.44 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The hwXponDeviceSLAProfileEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwGponDeviceSrvProfileOntUpIgmpMsgCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.73 | NA | |||||||||||
table · not-accessible · current This table is used to set and query the user-VLAN-based IGMP packet forwarding mode of ONT. The indexes of this table are hwGponDeviceSrvProfileOntIgmpCfgNameIndex and hwGponDeviceSrvProfileOntUpIgmpMsgUserVlan. | |||||||||||||
| RhwGponDeviceSrvProfileOntUpIgmpMsgCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.73.1 | NA | |||||||||||
row · not-accessible · current This table is used to set and query the user-VLAN-based IGMP packet forwarding mode of ONT. The indexes of this entry are hwGponDeviceSrvProfileOntIgmpCfgNameIndex and hwGponDeviceSrvProfileOntUpIgmpMsgUserVlan. | |||||||||||||
| ChwGponDeviceSrvProfileOntIgmpCfgNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON service profile name index. | |||||||||||||
| ChwGponDeviceSrvProfileOntUpIgmpMsgUserVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the user VLAN of upstream IGMP packets. 0..4095 indicates the user VLAN. | |||||||||||||
| ChwGponDeviceSrvProfileOntUpIgmpTransmitMode | 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the IGMP packet forwarding mode. Only the value transparent(1) is supported currently. Options: 1. transparent(1) - Indicates that the IGMP upstream packets forward mode is transparent 2. translation(2) - Indicates that the IGMP upstream packets forward mode is translation 3. default(3) - Indicates that the IGMP upstream packets forward mode is add VLAN tag 4. invalid(-1) - Indicates that the query fails or no information is detected.
| |||||||||||||
| ChwGponDeviceSrvProfileOntUpIgmpMsgTranslationVlan | 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.4 | Integer32 (-1 | 0..4095) | RW | ||||||||||
column · Integer32 (-1 | 0..4095) · read-write · current This object indicates the ont upstream IGMP packets will be translate to the translation vlan. | |||||||||||||
| ChwGponDeviceSrvProfileOntUpIgmpMsgPriority | 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.5 | Integer32 (-1 | 0..7) | RW | ||||||||||
column · Integer32 (-1 | 0..7) · read-write · current When upstream IGMP packets were added a vlan or translated to the translation vlan, priority was set. | |||||||||||||
| ChwGponDeviceSrvProfileOntUpIgmpMsgCfgRowStatus | 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Row status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | |||||||||||||
| ThwGponDeviceLineProfGemBundleCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.74 | NA | |||||||||||
table · not-accessible · current This is the XPON line profile GEM port bundle configure table. The indexes of this table are hwGponDeviceLineProfGemBundleLineProfNameIndex and hwGponDeviceLineProfGemBundleCfgMaster. | |||||||||||||
| RhwGponDeviceLineProfGemBundleCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.74.1 | NA | |||||||||||
row · not-accessible · current This is the XPON line profile GEM port bundle config table. The indexes of this entry are hwGponDeviceLineProfGemBundleLineProfNameIndex and hwGponDeviceLineProfGemBundleCfgMaster. | |||||||||||||
| ChwGponDeviceLineProfGemBundleLineProfNameIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.74.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the XPON line profile name index. | |||||||||||||
| ChwGponDeviceLineProfGemBundleCfgMaster | 1.3.6.1.4.1.2011.6.128.1.1.3.74.1.2 | Integer32 (0..1023) | NA | ||||||||||
column · Integer32 (0..1023) · not-accessible · current Indicates the master GEM index of bundle. | |||||||||||||
| ChwGponDeviceLineProfGemBundleCfgSlaveList | 1.3.6.1.4.1.2011.6.128.1.1.3.74.1.3 | OCTET STRING (SIZE (0..255)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-write · current Indicates the slave GEM ports of bundle. The value of slave GEM ports of bundle: number(1byte) :Indicates the number of slave GEM ports . The maximum number is 7. gemportid(2byte * number) :Indicates a slave GEM port ID. | |||||||||||||
| ThwGponDeviceLineProfMulticastGemCfgTable | 1.3.6.1.4.1.2011.6.128.1.1.3.148 | NA | |||||||||||
table · not-accessible · current This is the XPON line profile multicast gemport config table. The index of this table is hwGponDeviceLineProfileInfoNameIndex. | |||||||||||||
| RhwGponDeviceLineProfMulticastGemCfgEntry | 1.3.6.1.4.1.2011.6.128.1.1.3.148.1 | NA | |||||||||||
row · not-accessible · current This is the XPON line profile multicast gemport config table. The index of this entry is hwGponDeviceLineProfileInfoNameIndex. | |||||||||||||
| ChwGponDeviceLineProfMulticastGemCfgTcontIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.148.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the XPON line profile T-CONT index. The issued value (-1) of T-CONT index indicates that the multicast gemport is not specified to any tcont. | |||||||||||||
| ChwGponDeviceLineProfMulticastGemCfgOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.3.148.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the port type of the ONT. Options: 1. eth(47) - ETH 2. ethBundle(254) - EthBundle 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponDeviceLineProfMulticastGemCfgOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.3.148.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the port index of the ONT, or the bundle-groupid when it is the eth-bundle port type. | |||||||||||||
| NhwXponDeviceStatisticObjects | 1.3.6.1.4.1.2011.6.128.1.1.4 | ||||||||||||
| ThwGponOltEthernetStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.21 | NA | |||||||||||
table · not-accessible · current The GPON port ether statistics table. The index of this table is ifIndex. | |||||||||||||
| RhwGponOltEthernetStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1 | NA | |||||||||||
row · not-accessible · current The GPON port ether statistics table. The index of this entry is ifIndex.
| |||||||||||||
| ChwGponOltEthernetStatisticReceivedPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent frames. | |||||||||||||
| ChwGponOltEthernetStatisticDropPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of Ethernet frames, including oversized frames, undersized frames, and CRC failures. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedTotalPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received GEM frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedBroadcastPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.5 | Counter64 | RO | 0 | |||||||||
| ChwGponOltEthernetStatisticReceivedMulticastPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.6 | Counter64 | RO | 0 | |||||||||
| ChwGponOltEthernetStatisticReceivedUnicastPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.7 | Counter64 | RO | 0 | |||||||||
column · Counter64 · read-only · current This object indicates the received unicast frames. Example values from LibreNMS test devices
| |||||||||||||
| ChwGponOltEthernetStatisticReceivedLen64Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 64-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedLen65To127Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 65~127-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedLen128To255Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 128~255-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedLen256To511Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 256~511-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedLen512To1023Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 512~1023-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedLen1024To1518Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 1024~1518-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedLenMore1518Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received over 1518-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.15 | Counter64 | RO | 0 | |||||||||
column · Counter64 · read-only · current This object indicates the received octets. Example values from LibreNMS test devices
| |||||||||||||
| ChwGponOltEthernetStatisticReceivedTooLongPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.16 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received oversize frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedTooShortPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.17 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received undersize frames. | |||||||||||||
| ChwGponOltEthernetStatisticReceivedCRCErrPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.18 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received error frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendTotalPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.19 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send GEM frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendBroadcastPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.20 | Counter64 | RO | 0 | |||||||||
| ChwGponOltEthernetStatisticSendMulticastPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.21 | Counter64 | RO | 0 | |||||||||
column · Counter64 · read-only · current This object indicates the send multicast frames. Example values from LibreNMS test devices
| |||||||||||||
| ChwGponOltEthernetStatisticSendUnicastPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.22 | Counter64 | RO | 0 | |||||||||
| ChwGponOltEthernetStatisticSendLen64Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.23 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 64-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendLen65To127Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.24 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 65~127-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendLen128To255Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.25 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 128~255-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendLen256To511Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.26 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 256~511-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendLen512To1023Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.27 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 512~1023-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendLen1024To1518Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.28 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 1024~1518-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendLenMore1518Bytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.29 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent over 1518-octet frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.30 | Counter64 | RO | 0 | |||||||||
column · Counter64 · read-only · current This object indicates the sent octets. Example values from LibreNMS test devices
| |||||||||||||
| ChwGponOltEthernetStatisticSendMulticastBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.31 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent multicast bytes. | |||||||||||||
| ChwGponOltEtherStatisticSendBufferOverflowDropPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.32 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent overflow drop frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendGreenOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.33 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent green frames. | |||||||||||||
| ChwGponOltEthernetStatisticSendGreenPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.34 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent green frames. | |||||||||||||
| ChwGponOltEthernetStatisticGreenDropPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.35 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the discarded green packets due to congestion. | |||||||||||||
| ChwGponOltEthernetStatisticSendYellowOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.36 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent yellow octets. | |||||||||||||
| ChwGponOltEthernetStatisticSendYellowPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.37 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent yellow frames. | |||||||||||||
| ChwGponOltEthernetStatisticYellowDropPakts | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.38 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the discarded yellow packets due to congestion. | |||||||||||||
| ChwGponOltEthernetStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.50 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponOltGemStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.22 | NA | |||||||||||
table · not-accessible · current The GPON port GEM frame statistics table. The index of this table is ifIndex. | |||||||||||||
| RhwGponOltGemStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1 | NA | |||||||||||
row · not-accessible · current The GPON port GEM frame statistics table. The index of this entry is ifIndex.
| |||||||||||||
| ChwGponOltGemStatisticReceivedFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received GEM frames. | |||||||||||||
| ChwGponOltGemStatisticReceivedOMCIPackts | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the recived OMCI frames. | |||||||||||||
| ChwGponOltGemStatisticReceivedPLOAMPackts | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the recived PLOAM frames. | |||||||||||||
| ChwGponOltGemStatisticReceivedIdlePackts | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the recived IDLE frames. | |||||||||||||
| ChwGponOltGemStatisticSendFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent GEM frames. | |||||||||||||
| ChwGponOltGemStatisticSendOMCIPackts | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent OMCI frames. | |||||||||||||
| ChwGponOltGemStatisticSendPLOAMPackts | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent PLOAM frames. | |||||||||||||
| ChwGponOltGemStatisticSendIdlePackts | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent IDLE frames. | |||||||||||||
| ChwGponOltGemStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.30 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponOntStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.23 | NA | |||||||||||
table · not-accessible · current The ONT statistics table. This table is used in xpon profile mode. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponOntStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.23.1 | NA | |||||||||||
row · not-accessible · current The ONT statistics table. This table is used in xpon profile mode. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponOntStatisticUpPackts | 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the upstream frames. | |||||||||||||
| ChwGponOntStatisticDownPackts | 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the downstream frames. | |||||||||||||
| ChwGponOntStatisticUpBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the upstream bytes. | |||||||||||||
| ChwGponOntStatisticDownBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the downstream bytes. | |||||||||||||
| ChwGponOntStatisticUpDropPackts | 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of upstream discarded frames. | |||||||||||||
| ChwGponOntStatisticDownDropPackts | 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of downstream discarded frames. | |||||||||||||
| ChwGponOntStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponOltGemIndexStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.24 | NA | |||||||||||
table · not-accessible · current The GEM Port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. | |||||||||||||
| RhwGponOltGemIndexStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1 | NA | |||||||||||
row · not-accessible · current The GEM Port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. | |||||||||||||
| ChwGponDeviceGemIndexObjectIndex | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the GEM Index. | |||||||||||||
| ChwGponOltGemIndexStatisticUpFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the upstream frames. | |||||||||||||
| ChwGponOltGemIndexStatisticDownFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the downstream frames. | |||||||||||||
| ChwGponOltGemIndexStatisticUpBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the upstream bytes. | |||||||||||||
| ChwGponOltGemIndexStatisticDownBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the downstream bytes. | |||||||||||||
| ChwGponOltGemIndexStatisticUpDropFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of upstream discarded frames. | |||||||||||||
| ChwGponOltGemIndexStatisticDownDropFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of downstream discarded frames. | |||||||||||||
| ChwGponOltGemIndexStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponOntEthernetStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.25 | NA | |||||||||||
table · not-accessible · current The ONT ETH port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntEthernetPortId. | |||||||||||||
| RhwGponOntEthernetStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1 | NA | |||||||||||
row · not-accessible · current The ONT ETH port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntEthernetPortId. | |||||||||||||
| ChwGponOntEthernetStatisticDataSource | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.1 | OBJECT IDENTIFIER | RO | ||||||||||
column · OBJECT IDENTIFIER · read-only · current This object indicates the ONT ETH statistics data source. | |||||||||||||
| ChwGponOntEthernetStatisticRecvDropEvents | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of received and discarded frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received bytes. | |||||||||||||
| ChwGponOntEthernetStatisticRecvPkts | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvBroadcastPkts | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received broadcast frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvMulticastPkts | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received multicast frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvCRCAlignErrors | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received CRC error frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvUndersizePkts | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received undersize frames. | |||||||||||||
| ChwGponOntEthernetStatisticMTUExceededDiscardFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send MTU exceeded discard frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvFragments | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of received fragments. | |||||||||||||
| ChwGponOntEthernetStatisticRecvJabbers | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received Jabber error frames. | |||||||||||||
| ChwGponOntEthernetStatisticCollisions | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the count of collisions. | |||||||||||||
| ChwGponOntEthernetStatisticRecvPkts64Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 64-octet frames | |||||||||||||
| ChwGponOntEthernetStatisticRecvPkts65to127Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 65~127-octet frames | |||||||||||||
| ChwGponOntEthernetStatisticRecvPkts128to255Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.15 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 128~255-octet frames | |||||||||||||
| ChwGponOntEthernetStatisticRecvPkts256to511Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.16 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 256~511-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvPkts512to1023Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.17 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 512~1023-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvPkts1024to1518Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.18 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 1024~1518-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvFCSErrors | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.19 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received FCS error frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendExcessiveCollision | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.20 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent excessive collision frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendLateCollision | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.21 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent late collision frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvFrameTooLongs | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.22 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received oversize frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvBufferOverflowson | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.23 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of received buffer overflows. | |||||||||||||
| ChwGponOntEthernetStatisticSendBufferOverflowson | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.24 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of sent buffer overflows. | |||||||||||||
| ChwGponOntEthernetStatisticSendSingleCollisionFrame | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.25 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of deferred sent frames due to single collision. | |||||||||||||
| ChwGponOntEthernetStatisticSendMultipleCollisionsFrame | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.26 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of deferred sent frames due to multiple collisions. | |||||||||||||
| ChwGponOntEthernetStatisticSendSQETestError | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.27 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of SQE test error messages. | |||||||||||||
| ChwGponOntEthernetStatisticDeferredTransmission | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.28 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent deferred frames. | |||||||||||||
| ChwGponOntEthernetStatisticInternalmacTransmitError | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.29 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent error frames at the MAC sub-layer. | |||||||||||||
| ChwGponOntEthernetStatisticSendCarrierSenseError | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.30 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent carrier sense errors. | |||||||||||||
| ChwGponOntEthernetStatisticRecvAlignmentError | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.31 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received alignment error frames. | |||||||||||||
| ChwGponOntEthernetStatisticInternalMACReceiveError | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.32 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received error frames at the MAC sub-layer. | |||||||||||||
| ChwGponOntEthernetStatisticRecvPPPoEFilteredFrame | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.33 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received PPPoE filtered frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendForwardedFrame | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.34 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send frames. | |||||||||||||
| ChwGponOntEthernetStatisticDelayExceededDiscard | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.35 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the discarded frames due to delay. | |||||||||||||
| ChwGponOntEthernetStatisticRecvUnicastPkts | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.36 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received unicast frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendUnicastPkts | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.37 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent unicast frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendBroadcastPkts | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.38 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent broadcast frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendMulticastPkts | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.39 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent multicast frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvPauseFlowCtrlFrame | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.40 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received pause flow control frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendPauseFlowCtrlFrame | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.41 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent pause flow control frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvGoodPktsOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.42 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received right octets. | |||||||||||||
| ChwGponOntEthernetStatisticSendGoodPktsOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.43 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent good frames octets. | |||||||||||||
| ChwGponOntEthernetStatisticRecvBadPktsOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.44 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received error octets. | |||||||||||||
| ChwGponOntEthernetStatisticSendBadPktsOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.45 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent error octets. | |||||||||||||
| ChwGponOntEthernetStatisticSendOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.46 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent error octets. | |||||||||||||
| ChwGponOntEthernetStatisticForwardDropEvents | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.47 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent drop events. | |||||||||||||
| ChwGponOntEthernetStatisticSendPkts64Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.48 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 64-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendPkts65to127Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.49 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 65~127-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendPkts128to255Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.50 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 128~255-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendPkts256to511Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.51 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 256~511-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendPkts512to1023Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.52 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 512~1023-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendPkts1024to1518Octets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.53 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 1024~1518-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticSendPktsOversize | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.54 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent oversize frames. | |||||||||||||
| ChwGponOntEthernetStatisticRecvPkts1519toOversizeOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.55 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 1519~oversize-octet frames. | |||||||||||||
| ChwGponOntEthernetStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.60 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponOntEthernetStatisticStateChangeTimes | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.61 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the ONT ethernet port state changed times. | |||||||||||||
| ChwGponOntEthernetStatisticDuration | 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.62 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Indicates the statistic duration of the GPON ONT ethernet port. Unit: second
| |||||||||||||
| ThwGponOntGemIndexStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.26 | NA | |||||||||||
table · not-accessible · current The ONT GEM Port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. | |||||||||||||
| RhwGponOntGemIndexStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1 | NA | |||||||||||
row · not-accessible · current The ONT GEM Port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. | |||||||||||||
| ChwGponOntGemIndexStatisticRecvLostFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the loss of frames. | |||||||||||||
| ChwGponOntGemIndexStatisticMisinsertedFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the misinserted frames. | |||||||||||||
| ChwGponOntGemIndexStatisticRecvFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received frames. | |||||||||||||
| ChwGponOntGemIndexStatisticRecvBlocks | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received blocks. | |||||||||||||
| ChwGponOntGemIndexStatisticSendBlocks | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent blocks. | |||||||||||||
| ChwGponOntGemIndexStatisticImpairedBlocks | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of received impaired data blocks. | |||||||||||||
| ChwGponOntGemIndexStatisticTransmittedGemFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of transmitted GEM frames. | |||||||||||||
| ChwGponOntGemIndexStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponOntTrafficFlowStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.27 | NA | |||||||||||
table · not-accessible · current The ONT traffic stream statistics table. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. | |||||||||||||
| RhwGponOntTrafficFlowStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1 | NA | |||||||||||
row · not-accessible · current The ONT traffic stream statistics table. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex.
| |||||||||||||
| ChwGponOntTrafficFlowStatisticLofiAlarmStatsCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of the ONT LOFI alarms. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpFramesScapeErrCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of ONT upstream scape error frames. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpFrameBipErrCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of ONT upstream frames with BIP errors. | |||||||||||||
| ChwGponOntTrafficFlowStatisticDnFramesBipErrCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of ONT downstream frames with BIP errors. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpFecDecodCorrectCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of upstream FEC decoding corrected blocks. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpFecDecodUnCorrectCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of upstream FEC decoding uncorrected blocks. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpHecCheckErrCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of upstream HEC errors. | |||||||||||||
| ChwGponOntTrafficFlowStatisticDowiAlarmCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The count of ONU DOWi(Drift of Window) Alarm. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpFecCodeDecodCorrectCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of upstream FEC code decoding corrected blocks. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpFecCodeCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of upstream FEC code blocks. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpFcsErrorCnt | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of upstream FCS code errors in current 15 minutes. The value (-1) indicates that the query fails or no information is detected. | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpFrameBitErrorRatio | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates upstream frame bit error ratio in current 15 minutes. The value of this object indicates the exponente of the exponential expression of the upstream frame bit error ratio. For example, if the upstream frame bit error ratio is calculated to be (0.0012), the exponential expression is 1.2E-3. The multiplicando (1.2) is ignored, and the value of this object is (3). The value (-1) indicates that the query fails or no information is detected. The value (0xFFFFFFE) indicates that the bit error ratio is (0). The value (0) indicates that the bit error ratio is (1). | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpEthFrameErrorRatio | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates upstream ETH frame error ratio in current 15 minutes. The value of this object indicates the exponente of the exponential expression of the upstream ETH frame error ratio. For example, if the upstream ETH frame bit error ratio is calculated to be (0.0012), the exponential expression is 1.2E-3. The multiplicando (1.2) is ignored, and the value of this object is (3). The value (-1) indicates that the query fails or no information is detected. The value (0xFFFFFFE) indicates that the bit error ratio is (0). The value (0) indicates that the bit error ratio is (1). | |||||||||||||
| ChwGponOntTrafficFlowStatisticUpGemFrameErrorRatio | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates upstream GEM frame error ratio in current 15 minutes. The value of this object indicates the exponente of the exponential expression of the upstream GEM frame error ratio. For example, if the upstream GEM frame bit error ratio is calculated to be (0.0012), the exponential expression is 1.2E-3. The multiplicando (1.2) is ignored, and the value of this object is (3). The value (-1) indicates that the query fails or no information is detected. The value (0xFFFFFFE) indicates that the bit error ratio is (0). The value (0) indicates that the bit error ratio is (1). | |||||||||||||
| ChwGponOntTrafficFlowStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponOltEthernetStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.41 | NA | |||||||||||
table · not-accessible · current The OLT ETH statisitcs table. The index of this table is ifIndex. | |||||||||||||
| RhwEponOltEthernetStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1 | NA | |||||||||||
row · not-accessible · current The OLT ETH statisitcs table. The index of this entry is ifIndex.
| |||||||||||||
| ChwEponOltEthernetStatisticRcvFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvBoardcastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received broadcast frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvMulticastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received multicast frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvUnicastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received unicast frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcv64OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 64-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcv65to127OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 65~127-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcv128to255OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 128~255-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcv256to511OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 256~511-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcv512to1023OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 512~1023-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcv1024to1518OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 1024~1518-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvOver1518OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received over 1518-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received octets. | |||||||||||||
| ChwEponOltEthernetStatisticRcvOversizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received oversize frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvUndersizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received undersize frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvCrcErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.15 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received CRC error frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvDiscardFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.16 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received discarded frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.17 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendBoardcastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.18 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent broadcast frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendMulticastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.19 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent multicast frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendUnicastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.20 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent unicast frames. | |||||||||||||
| ChwEponOltEthernetStatisticSend64OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.21 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 64-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticSend65to127OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.22 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 65~127-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticSend128to255OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.23 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 128~255-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticSend256to511OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.24 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 256~511-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticSend512to1023OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.25 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 512~1023-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticSend1024to1518OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.26 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 1024~1518-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendOver1518OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.27 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent over 1518-octet frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.28 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent octets. | |||||||||||||
| ChwEponOltEthernetStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.50 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltEthernetStatisticRcvErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.51 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received error frames. | |||||||||||||
| ChwEponOltEthernetStatisticRcvFragments | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.52 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received fragments. | |||||||||||||
| ChwEponOltEthernetStatisticRcvJabbers | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.53 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received jabbers. | |||||||||||||
| ChwEponOltEthernetStatisticRcvDropEvents | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.54 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received drop events. | |||||||||||||
| ChwEponOltEthernetStatisticSendDropEvents | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.55 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send drop events. | |||||||||||||
| ChwEponOltEthernetStatisticSendDiscardFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.56 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send discard frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.57 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send error frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendCrcErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.58 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send CRC error frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendUndersizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.59 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send undersize frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendOversizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.60 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send oversize frames. | |||||||||||||
| ChwEponOltEthernetStatisticSendFragments | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.61 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send fragments. | |||||||||||||
| ChwEponOltEthernetStatisticSendJabbers | 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.62 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the send jabbers. | |||||||||||||
| ThwEponOltLlidStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.42 | NA | |||||||||||
table · not-accessible · current The OLT LLID statistics table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlid. | |||||||||||||
| RhwEponOltLlidStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1 | NA | |||||||||||
row · not-accessible · current The OLT LLID statistics table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlid. | |||||||||||||
| ChwEponDeviceOntLlid | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT LLID. | |||||||||||||
| ChwEponOltLlidStatisticRecvDataFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received data frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvDataBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received data octets. | |||||||||||||
| ChwEponOltLlidStatisticRecvUnicastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received unicast frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvMulticastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received multicast frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvBoardcastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received broadcast frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvRightFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received right frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvRightBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received right octets. | |||||||||||||
| ChwEponOltLlidStatisticRecvErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received error frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvErrorBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received error octets. | |||||||||||||
| ChwEponOltLlidStatisticRecv64ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 64-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticRecv65to127ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 65~127-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticRecv128to255ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 128~255-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticRecv256to511ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 256~511-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticRecv512to1023ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.15 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 512~1023-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticRecv1024to1518ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.16 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 1024~1518-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvOver1518ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.17 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received over 1518-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvUndersizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.18 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received undersize frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvOversizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.19 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received oversize frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvFcsErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.20 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received FCS error frames. | |||||||||||||
| ChwEponOltLlidStatisticTransDataFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.21 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent data frames. | |||||||||||||
| ChwEponOltLlidStatisticTransDataBytes | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.22 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent data octets. | |||||||||||||
| ChwEponOltLlidStatisticTransUnicastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.23 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent unicast frames. | |||||||||||||
| ChwEponOltLlidStatisticTransMulticastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.24 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent multicast frames. | |||||||||||||
| ChwEponOltLlidStatisticTransBoardcastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.25 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent broadcast frames. | |||||||||||||
| ChwEponOltLlidStatisticTrans64ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.26 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 64-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticTrans65to127ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.27 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 65~127-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticTrans128to255ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.28 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 128~255-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticTrans256to511ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.29 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 256~511-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticTrans512to1023ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.30 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 512~1023-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticTrans1024to1518ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.31 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 1024~1518-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticTransOver1518ByteFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.32 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent over 1518-octet frames. | |||||||||||||
| ChwEponOltLlidStatisticTransFcsErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.33 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent FCS error frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvLineCodeErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.34 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Received line code error frames. | |||||||||||||
| ChwEponOltLlidStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.50 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltLlidStatisticRecvCrcErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.51 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the recieved CRC error frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvFragments | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.52 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the recieved fragments. | |||||||||||||
| ChwEponOltLlidStatisticRecvJabbers | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.53 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the recieved jabbers. | |||||||||||||
| ChwEponOltLlidStatisticRecvDiscardFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.54 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the recieved discarded frames. | |||||||||||||
| ChwEponOltLlidStatisticRecvDropEvents | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.55 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the recieved drop events. | |||||||||||||
| ChwEponOltLlidStatisticTransDropEvents | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.56 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent drop events. | |||||||||||||
| ChwEponOltLlidStatisticTransDiscardFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.57 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent discarded frames. | |||||||||||||
| ChwEponOltLlidStatisticTransErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.58 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent error frames. | |||||||||||||
| ChwEponOltLlidStatisticTransCrcErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.59 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent CRC error frames. | |||||||||||||
| ChwEponOltLlidStatisticTransUndersizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.60 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent undersize frames. | |||||||||||||
| ChwEponOltLlidStatisticTransOversizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.61 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent oversize frames. | |||||||||||||
| ChwEponOltLlidStatisticTransFragments | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.62 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent fragments. | |||||||||||||
| ChwEponOltLlidStatisticTransJabbers | 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.63 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent jabbers. | |||||||||||||
| ThwEponOntEthernetPortStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.43 | NA | |||||||||||
table · not-accessible · current The ONT ETH port statistics table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. | |||||||||||||
| RhwEponOntEthernetPortStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1 | NA | |||||||||||
row · not-accessible · current The ONT ETH port statistics table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvMulticastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received multicast frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvBroadcastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received boardcast frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecv64OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 64-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecv65to127OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 65~127-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecv128to255OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 128~255-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecv256to511OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 256~511-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecv512to1023OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 512~1023-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecv1024to1518OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 1024~1518-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvUndersizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received undersize frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvTooLongFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received oversize frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvFragments | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received fragments. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvJabberErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received jabbers error frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvFCSErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received FCS error frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvDropFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.15 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received discarded frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvAlignmentErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.16 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received alignment error frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticInternalMACRecvErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.17 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received error frames at the MAC sub-layer. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvPPPoEFilteredFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.18 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received PPPoE filtered frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvBufferOverflows | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.19 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received buffer overflows. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.20 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received octets. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.21 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransDeferredFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.22 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent deferred frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransMTUExceededDiscardFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.23 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent MTU exceeded discard frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransCarrierSenseErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.24 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent carrier sense errors. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransSQETestErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.25 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent SQE test errors. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransSingleCollisionFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.26 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent single collision frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransMultipleCollisionsFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.27 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent multiple collision frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransExcessiveCollisionFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.28 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent excessive collision frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransLateCollisionFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.29 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent late collisions. | |||||||||||||
| ChwEponOntEthernetPortStatisticInternalmacTransErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.30 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent error frames at the MAC sub-layer. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransBufferOverflows | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.31 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent buffer overflows. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.32 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent octets. | |||||||||||||
| ChwEponOntEthernetPortStatisticStateChange | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.33 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the state changed times. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransUnicastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.34 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent unicast frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransBroadcastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.35 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent broadcast frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransMulticastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.36 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent multicast frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecv1519toOversizeOctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.37 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received 1519~oversize-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvUnicastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.38 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received unicast frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTrans64OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.39 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 64-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTrans65to127OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.40 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 65~127-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTrans128to255OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.41 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 128~255-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTrans256to511OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.42 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 256~511-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTrans512to1023OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.43 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 512~1023-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTrans1024to1518OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.44 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent 1024~1518-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransOver1518OctetFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.45 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent over 1518-octet frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.50 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOntEthernetPortStatisticRecvErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.51 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received error frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvCrcErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.52 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received CRC error frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticRecvDropEvents | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.53 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received drop events. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransDropEvents | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.54 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent drop events. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransDiscardFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.55 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent discarded frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.56 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent error frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransCrcErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.57 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent CRC error frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransUndersizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.58 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent undersize frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransOversizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.59 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent oversize frames. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransFragments | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.60 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent fragments. | |||||||||||||
| ChwEponOntEthernetPortStatisticTransJabbers | 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.61 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent jabbers. | |||||||||||||
| ThwEponOntCPUStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.44 | NA | |||||||||||
table · not-accessible · current The ONT CPU statistics table. The index of this table is a combination of ifIndex, and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponOntCPUStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1 | NA | |||||||||||
row · not-accessible · current The ONT CPU statistics table. The index of this entry is a combination of ifIndex, and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponOntCPUStatisticIGMP | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the IGMP frames transmitted through the CPU. | |||||||||||||
| ChwEponOntCPUStatisticARP | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the ARP frames transmitted through the CPU. | |||||||||||||
| ChwEponOntCPUStatisticDHCP | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the DHCP frames transmitted through the CPU. | |||||||||||||
| ChwEponOntCPUStatisticPPPOE | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the PPPOE frames transmitted through the CPU. | |||||||||||||
| ChwEponOntCPUStatisticVOIP | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the VOIP frames transmitted through the CPU. | |||||||||||||
| ChwEponOntCPUStatisticDBPU | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the BPDU frames transmitted through the CPU. | |||||||||||||
| ChwEponOntCPUStatisticOTHER | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the other frames transmitted through the CPU. | |||||||||||||
| ChwEponOntCPUStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwGponTDMPortStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.45 | NA | |||||||||||
table · not-accessible · current This is the E1 perform monitor statistic table. The index of this table is a combination of ifIndex, hwGponTDMPortStatisticOntIndex, hwGponTDMPortStatisticOntPhyType and hwGponTDMPortStatisticOntPhyIndex. | |||||||||||||
| RhwGponTDMPortStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1 | NA | |||||||||||
row · not-accessible · current This is the E1 perform monitor statistic table. The index of this entry is a combination of ifIndex, hwGponTDMPortStatisticOntIndex, hwGponTDMPortStatisticOntPhyType and hwGponTDMPortStatisticOntPhyIndex. | |||||||||||||
| ChwGponTDMPortStatisticOntIndex | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the ONT index. | |||||||||||||
| ChwGponTDMPortStatisticOntPhyType | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port type of the ONT. | |||||||||||||
| ChwGponTDMPortStatisticOntPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the port index of the ONT. | |||||||||||||
| ChwGponTDMPortStatisticDataES | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.4 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This object indicates the statistic of the errored seconds. | |||||||||||||
| ChwGponTDMPortStatisticDataSES | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.5 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This object indicates the statistic of the serverly erroeds. | |||||||||||||
| ChwGponTDMPortStatisticDataUAS | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This object indicates the statistic of the unavailable seconds. | |||||||||||||
| ChwGponTDMPortStatisticDataEFS | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This object indicates the statistic of the error free Seconds. | |||||||||||||
| ChwGponTDMPortStatisticClear | 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponOntLineQualityStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.46 | NA | |||||||||||
table · not-accessible · current This table is used to query or clear the statistics for the EPON line quality. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. | |||||||||||||
| RhwEponOntLineQualityStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.46.1 | NA | |||||||||||
row · not-accessible · current This table is used to query or clear the statistics for the EPON line quality. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex.
| |||||||||||||
| ChwEponOntLineQualityStatisticFCSError | 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of queried FCS error frames. | |||||||||||||
| ChwEponOntLineQualityStatisticLineCodeError | 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of queried line coding error frames. | |||||||||||||
| ChwEponOntLineQualityStatisticFrameLengthInrangeError | 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of error frames whose frames lengths are not within a valid range. | |||||||||||||
| ChwEponOntLineQualityStatisticLLIDMismatchError | 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the number of queried error frames whose LLIDs are mismatched. | |||||||||||||
| ChwEponOntLineQualityStatisticclear | 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwEponOltChannelEthernetStatisticTable | 1.3.6.1.4.1.2011.6.128.1.1.4.47 | NA | |||||||||||
table · not-accessible · current The OLT channel ETH statisitcs table. The index of this table is a combination of ifIndex and hwEponOltChannelId. | |||||||||||||
| RhwEponOltChannelEthernetStatisticEntry | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1 | NA | |||||||||||
row · not-accessible · current The OLT channel ETH statisitcs table. The index of this entry is a combination of ifIndex and hwEponOltChannelId.
| |||||||||||||
| ChwEponOltChannelId | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the channel number. Options: 1. oneGbitChannel(1) - Indicates that the channel number is 1G 2. tenGbitChannel(2) - Indicates that the channel number is 10G 3. twoGbitChannel(3) - Indicates that the channel number is 2G 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received octets. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvBroadcastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received broadcast frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvMulticastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received multicast frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvUnicastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received unicast frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvOversizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received oversize frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvUndersizeFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received undersize frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvCrcErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received CRC error frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvLlidErrorFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received LLID error frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticRcvUngrantedFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the received ungranted frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticSendOctets | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent octets. | |||||||||||||
| ChwEponOltChannelEthernetStatisticSendFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticSendBroadcastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent broadcast frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticSendMulticastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.15 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent multicast frames. | |||||||||||||
| ChwEponOltChannelEthernetStatisticSendUnicastFrames | 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.16 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the sent unicast frames. | |||||||||||||
| NhwXponDeviceLoopbackObjects | 1.3.6.1.4.1.2011.6.128.1.1.5 | ||||||||||||
| ThwGponDeviceGemLoopbackTable | 1.3.6.1.4.1.2011.6.128.1.1.5.1 | NA | |||||||||||
table · not-accessible · current This is the GEM port loopback table. This table is used to configure and query the GEM port loopack. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. | |||||||||||||
| RhwGponDeviceGemLoopbackEntry | 1.3.6.1.4.1.2011.6.128.1.1.5.1.1 | NA | |||||||||||
row · not-accessible · current This is the GEM port loopback table. This table is used to configure and query the GEM port loopack. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. | |||||||||||||
| ChwGponGemOltLoopbackType | 1.3.6.1.4.1.2011.6.128.1.1.5.1.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the type of OLT GEM port loopback. Options: 1. noloopback(1) - No Loopback 2. oltremoteinnerloopback(2) - From OLT GEM port to OLT NNI 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwGponGemOntLoopbackType | 1.3.6.1.4.1.2011.6.128.1.1.5.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the type of ONT GEM port loopback. Options: 1. noloopback(1) - No Loopback 2. ontremoteinnerloopback(2) - From ONT GEM port to OLT NNI 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwXponDeviceOntUniLoopbackTable | 1.3.6.1.4.1.2011.6.128.1.1.5.2 | NA | |||||||||||
table · not-accessible · current This is the ONT UNI loopback table. This table is used to configure and query the ONT UNI loopack. The index of this table is a combination of ifIndex, hwXponDeviceOntIndex, hwXponOntUniPhyType and hwXponOntUniPhyIndex. | |||||||||||||
| RhwXponDeviceOntUniLoopbackEntry | 1.3.6.1.4.1.2011.6.128.1.1.5.2.1 | NA | |||||||||||
row · not-accessible · current This is the ONT UNI loopback table. This table is used to configure and query the ONT UNI loopack. The index of this entry is a combination of ifIndex, hwXponDeviceOntIndex, hwXponOntUniPhyType and hwXponOntUniPhyIndex. | |||||||||||||
| ChwXponOntUniPhyType | 1.3.6.1.4.1.2011.6.128.1.1.5.2.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current This object indicates the physical type of ONT UNI. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. moca(46) - MOCA 7. eth(47) - ETH 8. iphost(50) - IPHOST
| |||||||||||||
| ChwXponOntUniPhyIndex | 1.3.6.1.4.1.2011.6.128.1.1.5.2.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the physical Index of ONT UNI. | |||||||||||||
| ChwXponOntUniLoopbackType | 1.3.6.1.4.1.2011.6.128.1.1.5.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the type of ONT UNI loopback. Options: 1. noloopback(1) - No Loopback 2. remoteinnerloopback(2) - From ONT UNI to OLT NNI 3. remoteouterloopback(4) - From ONT NNI to OLT UNI 4. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwXponDeviceOltLoopbackTable | 1.3.6.1.4.1.2011.6.128.1.1.5.3 | NA | |||||||||||
table · not-accessible · current This is the OLT loopback table. This table is used to configure and query the loopack based on OLT. The index of this table is ifIndex. | |||||||||||||
| RhwXponDeviceOltLoopbackEntry | 1.3.6.1.4.1.2011.6.128.1.1.5.3.1 | NA | |||||||||||
row · not-accessible · current This is the OLT loopback table. This table is used to configure and query the loopack based on OLT. The index of this entry is ifIndex.
| |||||||||||||
| ChwXponOltInnerLoopback | 1.3.6.1.4.1.2011.6.128.1.1.5.3.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of OLT PON interface inner loopback. inner loopback: From OLT interface to NNI. Options: 1. disable(1) - Disable the switch of OLT PON interface inner loopback 2. enable(2) - Enable the switch of OLT PON interface inner loopback 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponOltOuterLoopback | 1.3.6.1.4.1.2011.6.128.1.1.5.3.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of OLT PON interface outer loopback. outer-loopback: From OLT interface to ONT UNI. Options: 1. disable(1) - Disable the switch of OLT PON interface outer loopback 2. enable(2) - Enable the switch of OLT PON interface outer loopback 3. invalid(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ThwXponDeviceOntExtLoopbackTable | 1.3.6.1.4.1.2011.6.128.1.1.5.4 | NA | |||||||||||
table · not-accessible · current This is the ONT extend loopback table. This table is used to configure and query the loopack based on the whole ONT. The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. | |||||||||||||
| RhwXponDeviceOntExtLoopbackEntry | 1.3.6.1.4.1.2011.6.128.1.1.5.4.1 | NA | |||||||||||
row · not-accessible · current This is the ONT extend loopback table. This table is used to configure and query the loopack based on the whole ONT. The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex.
| |||||||||||||
| ChwXponOntNniInnerLoopback | 1.3.6.1.4.1.2011.6.128.1.1.5.4.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of ONT NNI inner loopback. inner loopback: From ONT NNI to OLT. Options: 1. disable(1) - Disable the switch of ONT NNI inner loopback 2. enable(2) - Enable the switch of ONT NNI inner loopback 3. unknown(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponOntTdmLocalInnerLoopback | 1.3.6.1.4.1.2011.6.128.1.1.5.4.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the switch of ONT TDM local inner loopback. Local inner loopback: From ONT to ONT UNI. Options: 1. disable(1) - Disable the switch of ONT TDM local inner loopback 2. enable(2) - Enable the switch of ONT TDM local inner loopback 3. unknown(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| ChwXponOntTdmLocalOuterLoopback | 1.3.6.1.4.1.2011.6.128.1.1.5.4.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the Switch of ONT TDM local outer loopback. Local outer loopback: From ONT to OLT. Options: 1. disable(1) - Disable the switch of ONT TDM local outer loopback 2. enable(2) - Enable the switch of ONT TDM local outer loopback 3. unknown(-1) - Indicates that the query fails or no information is detected
| |||||||||||||
| NhwXponDeviceLineTestObjects | 1.3.6.1.4.1.2011.6.128.1.1.6 | ||||||||||||
| ThwGponDeviceGemLineTestTable | 1.3.6.1.4.1.2011.6.128.1.1.6.1 | NA | |||||||||||
table · not-accessible · current This is the GEM port line test table. This table is used to do line testing from OLT to ONT GEM port. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. | |||||||||||||
| RhwGponDeviceGemLineTestEntry | 1.3.6.1.4.1.2011.6.128.1.1.6.1.1 | NA | |||||||||||
row · not-accessible · current This is the GEM port line test table. This table is used to do line testing from OLT to ONT GEM port. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. | |||||||||||||
| ChwGponGemLineTestFrameLength | 1.3.6.1.4.1.2011.6.128.1.1.6.1.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the frame length of GEM port line test. Range: 64-1518. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwGponGemLineTestFramesTxNum | 1.3.6.1.4.1.2011.6.128.1.1.6.1.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the number of GEM port line test frames sending. Range: 5-100. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwGponGemLineTestFramesRxNum | 1.3.6.1.4.1.2011.6.128.1.1.6.1.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of GEM port line test frames receiving. Range: 0-100. | |||||||||||||
| ThwXponDeviceOntUniLineTestTable | 1.3.6.1.4.1.2011.6.128.1.1.6.2 | NA | |||||||||||
table · not-accessible · current This is the ONT UNI line test table. This table is used to do line testing from OLT to ONT UNI. The index of this table is a combination of ifIndex, hwXponDeviceOntIndex, hwXponOntUniPhyType and hwXponOntUniPhyIndex. | |||||||||||||
| RhwXponDeviceOntUniLineTestEntry | 1.3.6.1.4.1.2011.6.128.1.1.6.2.1 | NA | |||||||||||
row · not-accessible · current This is the ONT UNI line test table. This table is used to do line testing from OLT to ONT UNI. The index of this entry is a combination of ifIndex, hwXponDeviceOntIndex, hwXponOntUniPhyType and hwXponOntUniPhyIndex. | |||||||||||||
| ChwXponOntUniLineTestFrameLength | 1.3.6.1.4.1.2011.6.128.1.1.6.2.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the frame length of ONT UNI line test. Range: 64-1518. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwXponOntUniLineTestFramesTxNum | 1.3.6.1.4.1.2011.6.128.1.1.6.2.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the number of ONT UNI line test frames sending. Range: 5-100. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwXponOntUniLineTestSrvFlowIndex | 1.3.6.1.4.1.2011.6.128.1.1.6.2.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the service-port index of ONT UNI line test flow. Range: 1-32768. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwXponOntUniLineTestFramesRxNum | 1.3.6.1.4.1.2011.6.128.1.1.6.2.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of ONT UNI line test frames receiving. Range: 0-100. | |||||||||||||
| ThwXponDeviceOntNniLineTestTable | 1.3.6.1.4.1.2011.6.128.1.1.6.3 | NA | |||||||||||
table · not-accessible · current This is the ONT NNI line test table. This table is used to do line testing from OLT to ONT NNI. The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. | |||||||||||||
| RhwXponDeviceOntNniLineTestEntry | 1.3.6.1.4.1.2011.6.128.1.1.6.3.1 | NA | |||||||||||
row · not-accessible · current This is the ONT NNI line test table. This table is used to do line testing from OLT to ONT NNI. The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex.
| |||||||||||||
| ChwXponOntNniLineTestFrameLength | 1.3.6.1.4.1.2011.6.128.1.1.6.3.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the frame length of ONT NNI line test. Range: 64-1518. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwXponOntNniLineTestFramesTxNum | 1.3.6.1.4.1.2011.6.128.1.1.6.3.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object indicates the number of ONT NNI line test frames sending. Range: 5-100. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results. | |||||||||||||
| ChwXponOntNniLineTestFramesRxNum | 1.3.6.1.4.1.2011.6.128.1.1.6.3.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of ONT NNI line test frames receiving. Range: 0-100. | |||||||||||||
Textual conventions
HwXponDynamicMacQueryParaInteger32Reserved parameter.
HwXponDynamicMacQueryTypeINTEGERxponInSpecOnt(3)xponOntInSpecPort(2)xponOntInSpecWlan(4)xponOntPortInSpecVlan(1)The value is quering index; if no index, th value is -1. For example, if the value is XponOntPortInSpecVlan(1), the value of ifIndex, hwXponDynamicMacVlanId, hwXponDynamicMacIndex, hwXponDynamicMacQueryPara0, hwXponDynamicMacQueryPara1, hwXponDynamicMacQueryPara2 is valid, and the value of hwXponDynamicMacQueryPara3 is invalid, -1. Options: 1. xponOntPortInSpecVlan(1) - The ONT port is in the specified vlan 2. xponOntInSpecPort(2) - The specified ONT port 3. xponOntInSpecOnt(3) - The specified ONT 4. xponOntInSpecWlan(4) - The WLAN of specified ONT
OntListOCTET STRINGEach octet within this value specifies a set of eight onts, with the first octet specifying ports 0 through 7, the second octet specifying ports 8 through 15 and others. Within each octet, the most significant bit represents the lowest numbered ont, and the least significant bit represents the highest numbered ont. Thus, each ont of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that ont is included in the set of onts; the ont is not included if its bit has a value of '0'.
PortListOCTET STRINGEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16 and others. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
VlanIndexUnsigned32A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB.