HUAWEI-XPON-COMMON-MIB
HUAWEI Technology Co.,LtdThe MIB is used for defining Huawei's GPON management common MIB objects for both profile-mode and distributing-mode.
snmptranslate -m HUAWEI-XPON-COMMON-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-XPON-COMMON-MIB <host> 1.3.6.1.4.1.2011.6.145Imports
| HUAWEI-DEVICE-MIB | hwFrameIndex, hwSlotIndex |
|---|---|
| HUAWEI-MIB | huaweiMgmt, huaweiUtility |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| RMON-MIB | EntryStatus, OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2, zeroDotZero |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwXponCommonMIB | 1.3.6.1.4.1.2011.6.145 | |||
identity The MIB is used for defining Huawei's GPON management common MIB objects for both profile-mode and distributing-mode. | ||||
| NhwXponCommonObjectMIB | 1.3.6.1.4.1.2011.6.145.1 | |||
| NhwXponCommonObjects | 1.3.6.1.4.1.2011.6.145.1.1 | |||
| NhwXponCommonControlObjects | 1.3.6.1.4.1.2011.6.145.1.1.1 | |||
| ThwGponDeviceOntVoipCfgFileInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.1 | NA | ||
table · not-accessible · current The hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file. The indexes of this table are ifIndex and hwGponDeviceOntObjIndex. | ||||
| RhwGponDeviceOntVoipCfgFileInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.1.1 | NA | ||
row · not-accessible · current The hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file. The indexes of this entry are ifIndex and hwGponDeviceOntObjIndex. | ||||
| ChwGponDeviceOntObjIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current ONT ID, range: 0-127. | ||||
| ChwGponDeviceOntVoipCfgFileState | 1.3.6.1.4.1.2011.6.145.1.1.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current ONT VOIP configuration file state. Options: 1. inactive(1) - Configuration retrieval has not been attempted 2. active(2) - Configuration was retrieved 3. initializing(3) - Configuration is now being retrieved 4. fault(4) - Configuration retrieval process failed 5. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponDeviceOntVoipCfgFileVersion | 1.3.6.1.4.1.2011.6.145.1.1.1.1.1.3 | OCTET STRING (SIZE (0..25)) | RO | |
column · OCTET STRING (SIZE (0..25)) · read-only · current ONT VOIP file version. | ||||
| ChwGponDeviceOntVoipFtpCfgResult | 1.3.6.1.4.1.2011.6.145.1.1.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Query the failed alarm information of config XML file. Options: 1. success(0) - The ONT configuration is successful 2. resolvefail(1) - Failed to resolve the configuration server name 3. notreach(2) - Cannot reach configuration server(The port cannot be reached, ICMP errors) 4. notconnect(3) - Cannot connect to configuration server (due to bad credentials or other fault after the port responded) 5. notvalidate(4) - Cannot validate configuration server 6. notauthenticate(5) - Cannot authenticate configuration session (e.g. missing credentials) 7. responsetimeout(6) - Timeout waiting for response from configuration server 8. responsefail(7) - Failure response received from configuration server 9. configfileerror(8) - Configuration file received has an error 10. invalid(-1) - Other errors
| ||||
| ThwGponDeviceOntPotsPortStateTable | 1.3.6.1.4.1.2011.6.145.1.1.1.2 | NA | ||
table · not-accessible · current Query the state of ONT POTS port table.The table is used to query the state of ONT POTS port. The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPotsPortId. | ||||
| RhwGponDeviceOntPotsPortStateEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.2.1 | NA | ||
row · not-accessible · current Query the state of ONT POTS port table.The table is used to query the state of ONT POTS port. The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPotsPortId. | ||||
| ChwGponDeviceOntPotsPortId | 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current ONT POTS port ID. | ||||
| ChwGponDeviceOntPotsPortPTPSrvState | 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port physics running state. Options: 1. normal(1) - Normal state 2. fail(2) - Fail state 3. invalidState(-1) - Returned in case of query failure or error
| ||||
| ChwGponDeviceOntPotsPortPTPAdminState | 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port physics admin state.
Options:
1. lock(1) - All user functions of this circuit pack are blocked, and alarm for this managed entity
are no longer generated
2. unlock(2) - Unlock state, all user functions of this circuit pack are normal
3. invalidState(-1) - This value is return when can't query or have some errors in query
| ||||
| ChwGponDeviceOntPotsPortPTPHookState | 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port physics hook state. Options: 1. onHook(1) - ONT POTS port physics is onHook 2. offHook(2) - ONT POTS port physics is offHook 3. invalidState(-1) - Returned in case of query failure or error
| ||||
| ChwGponDeviceOntPotsPortCTPSrvState | 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port service running state. Options: 1. noneOrinitial(1) - None or initial state 2. registered(2) - Registered state 3. inSession(3) - In session 4. failedRegistration(4) - Failed in registration 5. failedInvite(5) - Failed in invite 6. portNotconfigured(6) - Port doesn't configure 7. configDone(7) - Config has been done 8. invalidState(-1) - Returned in case of query failure or error
| ||||
| ChwGponDeviceOntPotsPortCTPSrvType | 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port service type. Options: 1. idleOrnone(1) - Idle or none type 2. twoWay(2) - Two way type 3. threeWay(3) - Three way type 4. fax(4) - Fax type 5. telem(5) - Telem type 6. conference(6) - Conference type 7. invalidType(-1) - Invalid type
| ||||
| ChwGponDeviceOntPotsPortCTPSrvCode | 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port code mode.
Options:
1. pcmu(1) - Audio data is encoded as eight bits per sample, after logarithmic scaling.
PCMU denotes mu-law scaling
2. reserved1(2) - Reserved
3. reserved2(3) - Reserved
4. gsm(4) - GSM denotes the European GSM 06.10 standard for full-rate
speech transcoding, ETS 300 961, which is based on RPE/LTP (residual pulse
excitation/long term prediction) coding at a rate of 13 kb/
5. g723(5) - Dual-rate speech coder for multimedia communications transmitting at 5.3 and 6.3
kbit/s
6. dvi4ClockRate8000(6) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was
specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type,
and the clock rate is 8000HZ
7. dvi4ClockRate16000(7) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was
specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type,
and the clock rate is 16000HZ
8. lpc(8) - LPC designates an experimental linear predictive encoding contributed by Ron Frederick,
which is based on an implementation written by Ron Zuckerman posted to the Usenet group
comp
9. pcma(9) - Audio data is encoded as eight bits per sample, after logarithmic scaling. PCMA denotes
A-law scaling
10. g722(10) - 7 kHz audio-coding within 64 kbit/s
11. l16TwoChannels(11) - Two channel encoding
12. l16OneChannel(12) - One channel encoding
13. qcelp(13) - QCELP CODEC compresses each 20 milliseconds of 8,000 Hz
14. cn(14) - Comfort Noise
15. mpa(15) - MPA denotes MPEG-1 or MPEG-2 audio encapsulated as elementary streams
16. g728(16) - Coding of speech at 16 kbit/s using low-delay code excited linear prediction
17. dvi4ClockRate11025(17) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified
by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate
is 11025HZ.
18. dvi4ClockRate22050(18) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified
by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate
is 11025HZ.
19. g729(19) - Coding of speech at 8 kbit/s using conjugate structure-algebraic code excited linear prediction
20. t38(20) - T.38 is used by the IFP peer to verify message alignment. It is identified by an ASN.1 Application tag
21. invalidCode(-1) - Invalid code
| ||||
| ThwXponOntFileTransmitionTable | 1.3.6.1.4.1.2011.6.145.1.1.1.3 | NA | ||
table · not-accessible · current This is ONT file transmission table. This table is used to transmit the config or diagnose files between BMS and ONU. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntTransmittingSerialNo. | ||||
| RhwXponOntFileTransmitionEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.3.1 | NA | ||
row · not-accessible · current This is ONT file transmission table. This table is used to transmit the config or diagnose files between BMS and ONU. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntTransmittingSerialNo. | ||||
| ChwXponOntIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current ONT ID, range: 0-254. | ||||
| ChwXponOntTransmittingSerialNo | 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The serial number of transmission. | ||||
| ChwXponOntTransmittingFileValue | 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.3 | OCTET STRING (SIZE (0..8192)) | RW | |
column · OCTET STRING (SIZE (0..8192)) · read-write · current The file to be transmitted. | ||||
| ChwXponOntTransmittingFileLength | 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The length of the file to be transmitted. | ||||
| ChwXponOntTransmittingFree | 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to free ONT transmitting buffer. Options: 1. clear(1) - Execute to free ONT transmitting buffer. 2. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ThwXponOntInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.4 | NA | ||
table · not-accessible · current The ont info table. This table is used to query the ont information. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1 | NA | ||
row · not-accessible · current The ont info table. This table is used to query the ont information. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntInfoOnlineDuration | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current The one-time online duration of the ONT. Unit: second
| ||||
| ChwXponOntInfoMemoryOccupation | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The Memory occupation of the ONT, range: 0-100. | ||||
| ChwXponOntInfoCpuOccupation | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The CPU occupation of the ONT, range: 0-100. | ||||
| ChwXponOntInfoTemperature | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The temperature of the ONT. Unit: degree centigrade
| ||||
| ChwXponOntInfoProductDescription | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.5 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current The product description of the ONT. | ||||
| ChwXponDeviceOntControlPrimaryStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The primary status of the Board.This parameter indicates the current overall service condition of an entity, i.e., whether it is in-service or out-of-service. Options: 1. isNr(1) - Normal 2. isAnr(2) - Abnormal 3. isRst(3) - Restricted 4. isAnrst(4) - Abnormal & Restricted 5. oosAu(5) - Autonomous 6. oosMa(6) - Management 7. oosAuma(7) - Autonomous & Management 8. oosAurst(8) - Autonomous & Restricted 9. oosMaanr(9) - Management & Abnormal
| ||||
| ChwXponDeviceOntControlSecondaryStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.7 | Bits | RO | |
column · Bits · read-only · current This parameter indicates the secondary status of the board. The parameter provides additional information pertaining to PST and PSTQ. For example, it may indicate the type and/or reason of the external command, the event that occurred in the Network Element, etc. Multiple values may apply to an entity at a given moment. The highest bit of SST value indicates the sstAins(0) status; The second highest bit of SST value indicates the sstFaf(1) status, and the rest can be deduced by analogy. This BITS structure can report the following status: 1. sstAins(0) - this bit position positively reports that the status of the board is automatic in-service 2. sstFaf(1) - Facility Failure 3. sstFlt(2) - Fault 4. sstLpbk(3) - Loopback 5. sstMea(4) - Mismatch of Equipment and Attributes 6. sstSgeo(5) - Supporting Entity Outage 7. sstStbyh(6) - Standby-Hot 8. sstTs(7) - Test 9. sstUas(8) - Unassigned 10. sstUeq(9) - Unequipped 11. sstWrk(10) - Working 12. sstPwr(11) - Power
| ||||
| ChwXponOntInfoCfgFileCrc | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The CRC value of the ONT. | ||||
| ChwXponOntInfoAppLoadState | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The state of the app load for ONT. 0x01 initstate 0x02 process %0 0x03 ftp load fail 0x04 loaded to mainboard process %10 0x05 loaded to ponboard process %20 0x06 loaded to ponboard fail 0x07 process %80 0x08 fail:user stop 0x09 fail:ont offline 0x0a fail:ont response fail 0x0b fail:ont response timeout 0x0c fail:pon inner error 0x0d process %100,ont restart 0x0e Process %100 the ont now is in survival mode 0x0f fail:system is busy because the ponboard's channel is occupied 0x10 fail:failed to verify the version information 0x11 fail:processing the loading task timed out 0x12 fail:ont file check failure 0x13 fail:code file validate failure 0x14 fail:system buffer is insufficient 0x15 fail:ont not support load 0x16 fail:ont storage space insufficient 0x17 fail:ont image file error 0x18 fail:ont image file existed 0x19 fail:ont activate image file fail 0x1a fail:ont commit image file fail 0x1b fail:ont image file crc error 0xff fail:unknown reason | ||||
| ChwXponOntInfoXmlLoadState | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The state of the xml load for ONT. 0x01 initstate 0x02 process %0 0x03 ftp load fail 0x04 loaded to mainboard process %10 0x05 loaded to ponboard process %20 0x06 loaded to ponboard fail 0x07 process %80 0x08 process %100 0x09 fail:user stop 0x0a fail:ont not support xml 0x0b fail:ont offline 0x0c fail:ont response unknown fail 0x0d fail:ont response timeout 0x0e fail:xml error ont will reconfigure fail 0x0f fail:xml format error 0x10 fail:xml content error 0x11 fail:ont find xml transfer error 0x12 fail:unknown error from ont 0x13 fail:unknown error from ponboard 0x14 fail:system is busy because the ponboard's channel is occupied 0xff fail:unknown reason | ||||
| ChwXponOntInfoSupportXmlVersion | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.11 | OCTET STRING (SIZE (0..25)) | RO | |
column · OCTET STRING (SIZE (0..25)) · read-only · current The xml version that the ONT supports, it is a V.R.C.SP string. | ||||
| ChwXponOntLastDistance | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The last ranging value of the ONT. Unit: m Options: 1. invalid (-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntInfoNoOnLineReason | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the reason why the ONT goes offline. The value (1) indicates that there is no third-party ONT interoperability certification. The value (2) indicates that the ONT interoperability mode mismatches with the OLT's. The value (3) indicates that the ONT basic information fails to be obtained. The value (5) indicates that the ONT interoperability file mismatches with the OLT's. The value (8) indicates that the ONT is incompatible with the OLT. The value (9) indicates that the actual ONT optical power is lower than the threshold for the optical power of the ONT going online. The value (10) indicates that the ONT is not in the white list. The value (-1) indicates that the ONT has interoperability access license. | ||||
| ChwXponOntInfoXmlLoadErrorInfo | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.14 | OCTET STRING (SIZE (0..280)) | RO | |
column · OCTET STRING (SIZE (0..280)) · read-only · current Indicates the error information when the ONT XML configuration fails to be loaded. | ||||
| ChwXponOntInfoInteroperabilityStandard | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current The interoperability mode of the ONT. Options: 1. ituT(1) - Indicates that the interoperability standard of the ONT is ituT 2. ctc(2) - Indicates that the interoperability standard of the ONT ctc 3. ericV1(3) - Indicates that the interoperability standard of the ONT is ericV1 4. ericV2(4) - Indicates that the interoperability standard of the ONT is ericV2 5. ituTG984(5) - Indicates that the interoperability standard of the ONT is ituTG984 6. ituTG988(6) - Indicates that the interoperability standard of the ONT is ituTG988 7. cuc(7) - Indicates that the interoperability standard of the ONT is cuc 8. cmcc(8) - Indicates that the interoperability standard of the ONT is cmcc 9. eci(9) - Indicates that the interoperability standard of the ONT is eci 10. mode1(10) - Indicates that the interoperability standard of the ONT is mode1 11. mode2(11) - Indicates that the interoperability standard of the ONT is mode2 12. mode2V2(12) - Indicates that the interoperability standard of the ONT is mode2V2 13. mode3(13) - Indicates that the interoperability standard of the ONT is mode3 14. mode4(14) - Indicates that the interoperability standard of the ONT is mode4 15. mode2V3(15) - Indicates that the interoperability standard of the ONT is mode2V3 16. mode2V4(16) - Indicates that the interoperability standard of the ONT is mode2V4 17. mode5(17) - Indicates that the interoperability standard of the ONT is mode5 18. eciV2(18) - Indicates that the interoperability standard of the ONT is eciV2 19. mode1V2(19) - Indicates that the interoperability standard of the ONT is mode1V2 20. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponDeviceOntObjectExtendFrameID | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Extend Frame ID. The issued value (-1) of Extend Frame ID indicates that the ONT is not specified to any Extend Frame. | ||||
| ChwXponOntInfoUsedMutualAuth | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the ONT uses mutual authentication. Options: 1. yes (1) -Indicates the ONT uses mutual authentication. 2. no (2) -Indicates the ONT does not use mutual authentication. 3. invalid (-1) -Indicates the invalid value.
| ||||
| ChwXponOntInfoPowerReductionStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the ONT is in power reduction state and its actual power reduction state. Options: 1. normal(1) -It means the ONT is in normal state,it is running normally and is not performing power reduction function. 2. doze(2) -doze mode:when in a LowPower state (the Asleep state) in this mode the ONT receiver remains active, ONT can receive downstream traffic,but it will deactivate its transmitter periodicly ,at this time it can't send its upstream traffic. 3. cyclicSleep(3) -cyclic sleep mode:when in a LowPower state (the Asleep state) in this mode, the ONT receiver is inactive;the ONT cannot receive downstream traffic. its transmitter is also inactive,so it can't send its upstream traffic. 4. watchfulSleep(4) -watchful sleep mode:when in a LowPower state (the Watch state) in this mode, the ONT periodically checks the downstream traffic for wakeup indications from the OLT. 5. invalid(-1) -Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntInfoNniPhysicalUpRate | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.19 | Integer32 (-1 | 0..10000000) | RO | |
column · Integer32 (-1 | 0..10000000) · read-only · current This object indicates the upstream physical rate negotiated between the ONT and OLT. Unit: Kbps For example, The upstream physical rate of the ONT is 1,000,000 Kbps in the EPON or asymmetric 10G EPON system. The upstream physical rate of the ONT is 1,244,160 Kbps in the GPON system. The upstream physical rate of the ONT is 2,488,320 Kbps in the XG-PON system. The upstream physical rate of the ONT is 10,000,000 Kbps in the symmetric 10G EPON system. The invalid value is -1. | ||||
| ChwXponOntInfoNniPhysicalDownRate | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.20 | Integer32 (-1 | 0..10000000) | RO | |
column · Integer32 (-1 | 0..10000000) · read-only · current This object indicates the downstream physical rate negotiated between the ONT and OLT. Unit: Kbps For example, The downstream physical rate of the ONT is 1,000,000 Kbps in the EPON system. The downstream physical rate of the ONT is 2,488,320 Kbps in the GPON system. The downstream physical rate of the ONT is 9,953,280 Kbps in the XG-PON or XGS-PON system. The downstream physical rate of the ONT is 10,000,000 Kbps in the 10G EPON system. The invalid value is -1. | ||||
| ChwGponDeviceOntActualNniType | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the actual NNI type of the ont. Options: 1. rate2dot5G1dot25G(1) -Downstream rate 2.5Gbps, upstream rate 1.25Gbps. 2. rate10G2dot5G (2) -Downstream rate 10Gbps, upstream rate 2.5Gbps. 3. rate10G10G (3) -Downstream rate 10Gbps, upstream rate 10Gbps. 4. invalid (-1) -Indicates the invalid value.
| ||||
| ChwGponDeviceOntLastActualNniType | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the last actual NNI type of the ont. Options: 1. rate2dot5G1dot25G(1) -Downstream rate 2.5Gbps, upstream rate 1.25Gbps. 2. rate10G2dot5G (2) -Downstream rate 10Gbps, upstream rate 2.5Gbps. 3. rate10G10G (3) -Downstream rate 10Gbps, upstream rate 10Gbps. 4. invalid (-1) -Indicates the invalid value.
| ||||
| ChwXponOntInfoHostName | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.23 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current The host name of the ONT. | ||||
| ChwXponOntFecStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the ONT FEC switch status. Options: 1. enable(1) - Indicates that the ONT FEC switch is enabled. 2. disable(2) - Indicates that the ONT FEC switch is disabled. 3. invalidValue(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwGponXponOntVsID | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the indexes of virtual system,range: 0-3. The invalid value is -1. | ||||
| ChwGponXponGlobalOntID | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.26 | Integer32 (-1 | 0..255) | RO | |
column · Integer32 (-1 | 0..255) · read-only · current This object indicates the Global ONT ID in system, range: 0-255. The invalid value is -1. | ||||
| ChwGponDeviceOntActualWorkChannel | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the actual work channel of the ont. | ||||
| ChwXponOntInfoPowerType | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the power type of the ONT. Options: 1. dc(1) - Indicates that the ONT power type is DC. 2. ac(2) - Indicates that the ONT power type is AC. 3. invalid (-1) -Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntInfoSystemUpDuration | 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.29 | Gauge32 | RO | |
column · Gauge32 · read-only · current The system up duration of the ONT. Unit: second
| ||||
| ThwXponOntIpMaintainTable | 1.3.6.1.4.1.2011.6.145.1.1.1.5 | NA | ||
table · not-accessible · current The ONT IP maintain table. This table is used to config the ONT. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex. | ||||
| RhwXponOntIpMaintainEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.5.1 | NA | ||
row · not-accessible · current The ONT IP maintain table. This table is used to config the ONT. The indexes of this entry are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex. | ||||
| ChwXponOntIpMaintainIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.5.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The IP index of the ont IP host. | ||||
| ChwXponOntIpRemotePingIpAddress | 1.3.6.1.4.1.2011.6.145.1.1.1.5.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The destination IP address of the ONT ping. | ||||
| ChwXponOntIpRemotePingSourceIpAddress | 1.3.6.1.4.1.2011.6.145.1.1.1.5.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The source IP address of the ONT ping. | ||||
| ChwXponOntIpRemotePingSize | 1.3.6.1.4.1.2011.6.145.1.1.1.5.1.4 | Integer32 (1..65500) | RW | |
column · Integer32 (1..65500) · read-write · current The packet length of the ONT ping. The default value is 56. | ||||
| ChwXponOntIpRemotePingCount | 1.3.6.1.4.1.2011.6.145.1.1.1.5.1.5 | Integer32 (1..3600) | RW | |
column · Integer32 (1..3600) · read-write · current The packet count of the ONT ping. The default value is 4. | ||||
| ChwXponOntIpRemotePingStop | 1.3.6.1.4.1.2011.6.145.1.1.1.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to stop ONT ping test. Options: 1. stop(1) - Stop ONT remote-ping. 2. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwXponPortInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.6 | NA | ||
table · not-accessible · current XPON port Info table. This table is used to query the port information. The index of this table is ifIndex. | ||||
| RhwXponPortInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.6.1 | NA | ||
row · not-accessible · current XPON port Info table. This table is used to query the port information. The index of this entry is ifIndex.
| ||||
| ChwXponPortSignalDetect | 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Query the signal detect info of the port. Options: 1. normal(1) - Optical signals are detected 2. fault(2) - Optical signals are not detected 3. unsupport(255) - Signal detection is not supported
| ||||
| ChwXponPortMacChipState | 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Query the mac chipset state info of the port. Options: 1. normal(1) - The XPON MAC chipset is normal 2. fail(2) - The XPON MAC chipset is fault
| ||||
| ChwXponPortOtdrCapability | 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether the optical module supports the OTDR test. Options: 1. support(1) - Indicates that the optical module supports downwave eOTDR. 2. notSupport(2) - Indicates that the optical module does not support the EOTDR 3. supportdownupwave(3) - Indicates that the optical module supports down and up wavelength eOTDR 4. supportindependant(4) - Indicates that the optical module supports independanct wavelength eOTDR 5. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponPortOpticalModulePhysicalForm | 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the optical module physical form. Options: 1. single(1) - GPON, EPON, XG-PON, XGS-PON, 10G EPON 2. combointegrated(2) - Integrated Combo PON 3. comboseperated(3) - Seperated Combo PON 4. wdmpon(4) - WDM PON 5. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponPortPhysicalUpRate | 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.5 | Integer32 (-1 | 0..20000000) | RO | |
column · Integer32 (-1 | 0..20000000) · read-only · current This object indicates the upstream physical rate negotiated between the port and OLT.
Unit: Kbps.
The invalid value is -1. | ||||
| ChwXponPortPhysicalDownRate | 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.6 | Integer32 (-1 | 0..20000000) | RO | |
column · Integer32 (-1 | 0..20000000) · read-only · current This object indicates the downstream physical rate negotiated between the port and OLT.
Unit: Kbps.
The invalid value is -1. | ||||
| ChwXponPortOnlineONTNumber | 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the the online ONT number of the port. | ||||
| ThwXponOntBatchInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.7 | NA | ||
table · not-accessible · current This table is used to query the ont run state, config state, admin state, load state, equipment ID, software version, system status, CRC value and offline reason. The length of query result can not exceed 7000 BYTEs. This table can not support the operation of get next. The index of this table is hwXponOntBatchQueryIndex. | ||||
| RhwXponOntBatchInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.7.1 | NA | ||
row · not-accessible · current This table is used to query the ont run state, config state, admin state, load state, equipment ID, software version, system status, CRC value and offline reason. The length of query result can not exceed 7000 BYTEs. This table can not support the operation of get next. The index of this entry is hwXponOntBatchQueryIndex. | ||||
| ChwXponOntBatchQueryIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.7.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The object indicates the index of the table hwXponOntBatchInfoTable. | ||||
| ChwXponOntBatchQueryItemMask | 1.3.6.1.4.1.2011.6.145.1.1.1.7.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The items of ont status need query, include ont run state, config state, admin state, app load state, xml load state, equipment ID, software version, system status, CRC value, offline reason and hardware version. | ||||
| ChwXponOntBatchQueryList | 1.3.6.1.4.1.2011.6.145.1.1.1.7.1.3 | OCTET STRING (SIZE (0..4096)) | RW | |
column · OCTET STRING (SIZE (0..4096)) · read-write · current The object indicates the ONT list, and each ONT takes 4 bytes, include frame(4bit), slot(6bit), port(6bit) and ontid(16bits) and the most number of ONT is 1024. | ||||
| ChwXponOntBatchQueryInfo | 1.3.6.1.4.1.2011.6.145.1.1.1.7.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The value of ont status:
run state(1byte) : 1-online,2-offline,255-invalid
config state(1byte) : 1-init,2-normal,3-fail,4-noresume,5-config,255-invalid
admin state(1byte) : 1-activated,2-deactivated,255-invalid
app load state(1byte) : 1-init,2-start,3-ftpfail,4-loadtoscu,5-loadtopon,6-loadtoponfail,
7-loadtoont,8-userstop,9-ontoffline,10-ontackfail,11-ontresponsetimeout,
12-errpon,13-ontreset,14-survival,15-channeloccupied,
16-errversion,17-tasktimeout,18-ontfilecheckerr,19-ontfilevalidatefail,
20-bufferinsufficient,21-ontnotsupport,22-ontstorageinfficient,
23-ontimagefilerr,24-ontimagefileexisted,25-ontimagefileactivatefail,
26-ontimagefilecommitfail,27-ontimagefilcrcerr,255-invalid
xml load state(1byte) : 1-init,2-start,3-ftpfail,4-loadtoscu,5-loadtopon,6-loadtoponfail,7-loadtoont,
8-crcreport,9-userstop,10-notsupport,11-ontoffline,12-ontackfail,
13-ontresponsetimeout,14-cfgfail,15-errformat,16-errcontent,17-errtransfer,
18-errontinner,19-errponboardinner,20-channeloccupied,255-invalid
equipment ID(20bytes) : the equipment ID of the ONT
software version(16bytes): the software version of the ONT
system status(1byte) : 1-normal,2-survival
CRC value(4bytes) : the CRC value report from the ONT
offline reason(1byte) : 1-LOS(Loss of signal),2-LOSi(Loss of signal for ONUi),
3-LOFi(Loss of frame of ONUi),4-SFi(Signal fail of ONUi),
5-LOAi(Loss of acknowledge with ONUi),6-LOAMi(Loss of PLOAM for ONUi),
7-deactive ONT fails,8-deactive ONT success,9-reset ONT,10-re-register ONT,
11-pop up fail,12-authentication fail,13-dying-gasp,15-LOKI(Loss of key synch with ONUi),
18-ring-deactivated,30-shut down ONT optical module,31-reset ONT by ONT command,
32-reset ONT by ONT reset button,33-reset ONT by ONT software,34-broadcast-attack-deactivated,
35-operator check fail,37-ONT self check is rogueont(The enumeration value is based on the board),
38-auto isolate reset,39-auto isolate deactivate,40-ONT is not in white list,
255-invalid
hardware version(16bytes): the hardware version of the ONT | ||||
| ThwXponOntPppoeSimuTestInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.8 | NA | ||
table · not-accessible · current This table is used for the PPPoE testing. The index of this table is a combination of ifIndex and hwXponOntIndex. | ||||
| RhwXponOntPppoeSimuTestInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1 | NA | ||
row · not-accessible · current This table is used for the PPPoE testing. The index of this entry is a combination of ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntPppoeSimuPortID | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current The object indicates the type and ID of the ONT port. port type(2 bytes) + port ID(2 bytes). The OLT supports port type 0 for an ETH port to be compatible with the NMS of an earlier version. | ||||
| ChwXponOntPppoeSimuOuterCVlanID | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.2 | Integer32 (-1..4095) | RW | |
column · Integer32 (-1..4095) · read-write · current The object indicts the vlan ID, GPON : 0 - 4095; EPON : 1 - 4094; the value -1 indicts that the query fails. | ||||
| ChwXponOntPppoeOuterSimuCVlanPri | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.3 | Integer32 (-1 | 0..7) | RW | |
column · Integer32 (-1 | 0..7) · read-write · current The priority of vlan. | ||||
| ChwXponOntPppoeSimuPppoeUsername | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.4 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current The user name of PPPoE test. | ||||
| ChwXponOntPppoeSimuPppoePassword | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.5 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current The password of PPPoE test. | ||||
| ChwXponOntPppoeSimuPppoeAuthProtocol | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The protocol type of PPPoE test. Options: 1. chap (1) - The protocol type of PPPoE test is chap. 2. pap (2) - The protocol type of PPPoE test is pap. 3. invalid (-1) - Indicates that the query fails.
| ||||
| ChwXponOntPppoeSimuSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to start or stop the PPPoE test. Options: 1. start (1) - Start the PPPoE test. 2. stop (2) - Stop the PPPoE test. 3. invalid (-1) - Indicates that the query fails.
| ||||
| ChwXponOntPppoeSimuMulticastGroupIPType | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.8 | InetAddressType | RW | |
column · InetAddressType · read-write · current Indicates the address type.
Options:
1. unknown(0) - An unknown address type. This value MUST
be used if the value of the corresponding
InetAddress object is a zero-length string.
It may also be used to indicate an IP address
that is not in one of the formats defined
below.
2. IPv4(1) - An IPv4 address as defined by the
InetAddressIPv4 textual convention. | ||||
| ChwXponOntPppoeSimuMulticastGroupIP | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.9 | InetAddress | RW | |
column · InetAddress · read-write · current Indicates the group IP address of the program. The format of this index is consistent with that of the address type. The default value is 0.0.0.0. | ||||
| ChwXponOntPppoeSimuMulticastVersion | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the multicast version in the ONT Multicast simulation instance. Options: 1. igmpV2(1) - Indicates the multicast version is IGMPV2. 2. igmpV3(2) - Indicates the multicast version is IGMPV3. 3. invalid(-1) - Indicates that the query fails. Default: igmpV2(1).
| ||||
| ChwXponOntPppoeSimuMulticastSourceIPType | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.11 | InetAddressType | RW | |
column · InetAddressType · read-write · current Indicates the address type.
Options:
1. unknown(0) - An unknown address type. This value MUST
be used if the value of the corresponding
InetAddress object is a zero-length string.
It may also be used to indicate an IP address
that is not in one of the formats defined
below.
2. IPv4(1) - An IPv4 address as defined by the
InetAddressIPv4 textual convention. | ||||
| ChwXponOntPppoeSimuMulticastSourceIP | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.12 | InetAddress | RW | |
column · InetAddress · read-write · current Indicates the source IP address of the program. The format of this index is consistent with that of the address type. The default value is 0.0.0.0. | ||||
| ChwXponOntPppoeSimuMulticastDataRate | 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the multicast date rate of the current simulation instance, it is valid when the simulation result is success. Unit: kbps. The invalid value is -1. | ||||
| ThwXponOntControlTable | 1.3.6.1.4.1.2011.6.145.1.1.1.9 | NA | ||
table · not-accessible · current The hwXponOntControlTable is used to config the ONT. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntControlEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1 | NA | ||
row · not-accessible · current The hwXponOntControlTable is used to config the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntConfigFactoryConfiguration | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is used to restore the ONT to factory configuration. Options: 1. restore (1) - Restore 2. completelyrestore(2) - Completely restore 3. invalid (-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntControlGracefulReset | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is used to reset the ONT gracefully. Options: 1. gracefullyreset (1) - Indicates that the ONT resets gracefully 2. invalid (-1) - Indicates the invalid value
| ||||
| ChwXponOntControlGraceTime | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.3 | Integer32 (-1 | 1..65535) | RW | |
column · Integer32 (-1 | 1..65535) · read-write · current This parameter is used to specify the maximum time to wait for the ONT to reset gracefully. The default maximum time for wait is 14400 seconds. The invalid value is -1. | ||||
| ChwXponOntDeleteVasService | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the vas service of the ONT. Options: 1. delete(1) - Delete the vas service of the ONT 2. invalid(-1) - invalid value
| ||||
| ChwXponOntControlOperatorCheckReset | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Reset operator check code of the ONT. Options: 1. reset(1) - Reset operator check code of the ONT 2. invalid(-1) - Invalid value
| ||||
| ChwXponOntControlRogueIsolateSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the switch of isolating or de-isolating a rogue ONT. Options: 1. isolate(1) - Isolate the rogue ONT 2. undoIsolate(2) - Undo isolate the rogue ONT The default value is undoIsolate(2).
| ||||
| ChwXponOntFec | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the ONT upstream FEC switch. Options: 1. enable(1) - Indicates that the ONT FEC switch is enabled. 2. disable(2) - Indicates that the ONT FEC switch is disabled. 3. useProfileConfig(3) - Indicates that the ONT FEC switch is using line profile configuration. 4. invalidValue(-1) - Indicates that the query fails or no information is detected. The default value is enable(1) for XG-PON ONT and EPON 10g/2g type ONT. The default value is useProfileConfig(3) for others in profile-mode. The default value is disable(2) for others in distributing-mode.
| ||||
| ChwXponOntControlWanAccessHttp | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the ONT WAN Access of Web. Options: 1. enable(1) - Indicates that the ONT WAN Access of Web is enabled. 2. disable(2) - Indicates that the ONT WAN Access of Web is disabled. 3. invalid(-1) - Indicates that the query fails or no information is detected. The default value is disable(2).
| ||||
| ChwXponOntControlLanAccessTelnet | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the ONT LAN Access of Telnet. Options: 1. enable(1) - Indicates that the ONT LAN Access of Telnet is enabled. 2. disable(2) - Indicates that the ONT LAN Access of Telnet is disabled. 3. invalid(-1) - Indicates that the query fails or no information is detected. The default value is disable(2).
| ||||
| ChwXponOntControlRollbackSoftware | 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is used to rollback the software of the ONT. Options: 1. rollbacksoftware(1) - Indicates that the ONT software version rolls back. 2. invalid(-1) - Indicates the invalid value.
| ||||
| ThwGponOntPortMulticastVlanTranslationTable | 1.3.6.1.4.1.2011.6.145.1.1.1.10 | NA | ||
table · not-accessible · current The hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT port. The indexes of this table are ifindex, hwGponDeviceOntObjectIndex, hwGponOntifType, hwGponOntifPort, hwGponOntPortMulticastVlanIndex. | ||||
| RhwGponOntPortMulticastVlanTranslationEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.10.1 | NA | ||
row · not-accessible · current The hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT port. The indexes of this entry are ifindex, hwGponDeviceOntObjectIndex, hwGponOntifType, hwGponOntifPort, hwGponOntPortMulticastVlanIndex. | ||||
| ChwGponOntifType | 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The ONT port type. Options: 1. vdsl(37) -The ONT port type is vdsl 2. wifi(40) -The ONT port type is wifi 3. eth(47) -The ONT port type is eth 4. ippath(61) -The ONT port type is ippath
| ||||
| ChwGponOntifPort | 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The ONT port ID. | ||||
| ChwGponOntPortMulticastVlanIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.3 | Integer32 | NA | |
column · Integer32 · not-accessible · current The multicast vlan index of ONT port. Ranging from 1 to 4095. | ||||
| ChwGponOntPortMulticastVlanCfgTranslatedVlan | 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.4 | Integer32 (-1 | 1..4095) | RW | |
column · Integer32 (-1 | 1..4095) · read-write · current The translation vlan of ONT port, when the GPON ONT port multicast vlan transmit mode is translation. | ||||
| ChwGponOntPortMulticastStripSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the multicast vlan transmit mode of GPON ONT port. Options: 1. untag(1) - Indicates that the GPON ONT port multicast vlan transmit mode is untag 2. tag(2) - Indicates that the GPON ONT port multicast vlan transmit mode is tag 3. translation(3) - Indicates that the GPON ONT port multicast vlan transmit mode is translation 4. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponOntPortMulticastVlanCfgRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntVoipConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.12 | NA | ||
table · not-accessible · current The hwXponOntVoipConfigTable is used to config the FTP Server and config the configuration files name. The indexes of this table are ifindex and hwXponOntIndex. | ||||
| RhwXponOntVoipConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.12.1 | NA | ||
row · not-accessible · current The hwXponOntVoipConfigTable is used to config the FTP Server and config the configuration files name. The indexes of this entry are ifindex and hwXponOntIndex.
| ||||
| ChwXponOntVoipUsedFtpServerProfile | 1.3.6.1.4.1.2011.6.145.1.1.1.12.1.1 | OCTET STRING (SIZE (0..15)) | RW | |
column · OCTET STRING (SIZE (0..15)) · read-write · current The server of used. | ||||
| ChwXponOntVoipFtpFileName | 1.3.6.1.4.1.2011.6.145.1.1.1.12.1.2 | OCTET STRING (SIZE (0..63)) | RW | |
column · OCTET STRING (SIZE (0..63)) · read-write · current The configuration file name. | ||||
| ChwXponOntVoipFtpFileTrigger | 1.3.6.1.4.1.2011.6.145.1.1.1.12.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current This leaf set 1 when config the FTP Server and config the configuration file name. | ||||
| ChwXponOntVoipConfigMethod | 1.3.6.1.4.1.2011.6.145.1.1.1.12.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Config tht ONT's voip service. Options: 1. default(1) - do not configure, ont default 2. omci(2) - OMCI 3. ftp(3) - configuration file retrieval 4. tr069(4) - tr069 The default value is default(1).
| ||||
| ThwXponOntConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.13 | NA | ||
table · not-accessible · current The hwXponOntConfigTable is used to config the ONT. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1 | NA | ||
row · not-accessible · current The hwXponOntConfigTable is used to config the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntUsedAlarmPolicyName | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.1 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The name of alarm policy profile which used by the ONT. | ||||
| ChwXponOntPowerSheddingProfName | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.2 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The name of the power shedding profile that is bound to the ONT. | ||||
| ChwXponOntUsedTr069ServerProfName | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the tr069 service profile that is bound to the ONT. | ||||
| ChwXponOntUsedLldpProfName | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.4 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the lldp profile that is bound to the ONT. | ||||
| ChwXponOntUsedDot1xProfName | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.5 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the 802.1X profile that is bound to the ONT. | ||||
| ChwXponOntUsedPowerReductionProfName | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.6 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the power reduction profile that is bound to the ONT. | ||||
| ChwXponOntUsedPolicyRouteProfileName | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.7 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the policy route profile that is bound to the ONT. | ||||
| ChwXponOntUsedInternetWanIpIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the ip index of ont internet wan. value list:0~3, -1 means delete | ||||
| ChwXponOntUsedMulticastWanIpIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the ip index of ont Iptv wan. value list:0~3, -1 means delete | ||||
| ChwXponOntUsedMulticastProfileName | 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.10 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of the multicast profile that is bound to the ONT. | ||||
| ThwXponOntWanInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.14 | NA | ||
table · not-accessible · current The hwXponOntWanInfoTable is used to query the information about WAN ports. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntWanInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.14.1 | NA | ||
row · not-accessible · current The hwXponOntWanInfoTable is used to query the information about WAN ports. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntWanInfoDetail | 1.3.6.1.4.1.2011.6.145.1.1.1.14.1.1 | OCTET STRING (SIZE (0..800)) | RO | |
column · OCTET STRING (SIZE (0..800)) · read-only · current This object indicates the information about WAN ports. | ||||
| ChwXponOntWanExtendInfoDetail | 1.3.6.1.4.1.2011.6.145.1.1.1.14.1.2 | OCTET STRING (SIZE (0..1500)) | RO | |
column · OCTET STRING (SIZE (0..1500)) · read-only · current This object indicates the information about WAN ports including IPv6 WAN. This object consists of length, version, the number of WAN ports (n) and n * WAN ports information. Principles to extend this object: 1. to add parameters, version should be upgraded, and the new parameters should be appended to the tail of each WAN information. 2. if the the version of OLT device or NMS is old, the OLT device or NMS only have to parse the content they can recognize. The format of this object is as follows: -------------------------------------------------------------------------------------- |field |field length | field description | -------------------------------------------------------------------------------------- |Total_Length |2 |Length from Version to WAN_port_N_info. | -------------------------------------------------------------------------------------- |Version |1 |Version indicates the format of WAN port info, which | | | |will be described detailly in SOI document. | -------------------------------------------------------------------------------------- |WAN_port_num |1 |Total number of WAN ports. | -------------------------------------------------------------------------------------- |WAN_port_1_info|x | x = (Total_Length - 2)/WAN_port_num | -------------------------------------------------------------------------------------- |WAN_port_2_info|x | | -------------------------------------------------------------------------------------- |...... |x | | -------------------------------------------------------------------------------------- |WAN_port_N_info|x | | -------------------------------------------------------------------------------------- | ||||
| ThwGponPortControlTable | 1.3.6.1.4.1.2011.6.145.1.1.1.15 | NA | ||
table · not-accessible · current The hwGponPortControlTable is used to config the information about ports. The index of this table is ifIndex. | ||||
| RhwGponPortControlEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1 | NA | ||
row · not-accessible · current The hwGponPortControlTable is used to config the information about ports. The index of this entry is ifIndex.
| ||||
| ChwGponPortControlDbaAssignMode | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the DBA bandwidth assignment mode. Options: 1. maxbandwidthusage(1) - max bandwidth usage mode 2. minloopdelay(2) - min loop delay mode 3. manual(3) - manual mode, this value is read-only 4. default(4) - default mode, the same with global DBA assignment mode 5. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponPortControlPonIdSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the PON-ID switch. Options: 1. enable(1) - Indicates that the PON-ID switch is enabled 2. disable(2) - Indicates that the PON-ID switch is disabled 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponPortControlPonIdInputMode | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the input mode of PON-ID identifier. Options: 1. text(1) - Indicates that the input mode of PON-ID identifier is text 2. hex(2) - Indicates that the input mode of PON-ID identifier is hex 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponPortControlPonIdIdentifier | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.4 | OCTET STRING (SIZE (1..7)) | RW | |
column · OCTET STRING (SIZE (1..7)) · read-write · current This object is used to configure the PON-ID identifier. The GPON port supports a maximum of 7 characters to be input for configuring the PON-ID identifier. The XG PON port supports a maximum of 4 characters to be input for configuring the PON-ID identifier. | ||||
| ChwGponPortMulticastEncryptMode | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the Multicast GEM Port encypt mode. Options: 1. disable(1) - Indicates that the Multicast GEM Port encypt mode is disable 2. enable(2) - Indicates that the Multicast GEM Port encypt mode is enable 3. adapt(3) - Indicates that the Multicast GEM Port encypt mode is adapt 4. invalid(-1) - Indicates that the query fails or no information is detected Default:disable(1).
| ||||
| ChwGponPortControlDbaSurplusAssign | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the surplus bandwidth assignment swith. Options: 1. enable(1) - Indicates that the surplus bandwidth assignment is enable 2. disable(2) - Indicates that the surplus bandwidth assignment is disable 3. invalid(-1) - Indicates that the query fails or no information is detected Default:disable(2).
| ||||
| ChwGponPortControlBEAssignMode | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the best effort assign mode. Options: 1. rateProportion(1) - Indicates that the best effort assign mode is rate proportion 2. priorityWeight(2) - Indicates that the best effort assign mode is priority and weight 3. invalid(-1) - Indicates that the query fails or the mode is average
| ||||
| ChwGponPortControlTrafficAlarmProfileName | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.8 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the traffic alarm profile name. This object is used to configure the traffic alarm profile. An empty string is used to unbind the traffic alarm profile. | ||||
| ChwGponPortControlMaxGuaranteedBandwidth | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the maximum guaranteed bandwidth, The value must be greater than or equal to 128 but cannot be larger than the maximum physical bandwidth of a PON port. Unit: kbps If the value of hwGponPortControlMaxGuaranteedBandwidth is set to 0xFFFFFFFF, the configured max guaranteed-bandwidth value will be canceled.
| ||||
| ChwGponPortControlWaveLengthID | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the wavelength of TWDM-PON port. Options: 1. waveLengthID0(0) - Indicates that the wavelength of TWDM-PON port is 1596.34nm. 2. waveLengthID1(1) - Indicates that the wavelength of TWDM-PON port is 1597.19nm. 3. waveLengthID2(2) - Indicates that the wavelength of TWDM-PON port is 1598.04nm. 4. waveLengthID3(3) - Indicates that the wavelength of TWDM-PON port is 1598.89nm. 5. waveLengthID4(4) - Indicates that the wavelength of TWDM-PON port is 1599.75nm. 6. waveLengthID5(5) - Indicates that the wavelength of TWDM-PON port is 1600.60nm. 7. waveLengthID6(6) - Indicates that the wavelength of TWDM-PON port is 1601.46nm. 8. waveLengthID7(7) - Indicates that the wavelength of TWDM-PON port is 1602.31nm. 9. waveLengthIDAuto(65534) - Indicates that the wavelength of TWDM-PON port is automatic. 10. invalid(-1) - Indicates that the wavelength of TWDM-PON port is invalid.
| ||||
| ChwGponPortControlComboMode | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the combo mode of COMBO-PON port. Options: 1. auto(1) - Indicates that the combo mode is auto. 2. wdm(2) - Indicates that the combo mode is WDM. 3. invalid(-1) - Indicates that the query fails or no information is detect. The default value is auto(1).
| ||||
| ChwGponPortControlFlexMode | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the flex mode of COMBO-PON port. Options: 1. gpon(2) -Indicates that the flex mode is Gpon. 2. xgpon(3) -Indicates that the flex mode is XG-Pon. 3. xgspon(4) -Indicates that the flex mode is XGS-Pon. 4. xgComboAuto(5) -Indicates that the flex mode is XG/G Combo auto Pon. 5. xgComboWdm(6) -Indicates that the flex mode is XG/G Combo wdm Pon. 6. xgsComboAuto(7) -Indicates that the flex mode is XGS/G Combo auto Pon. 7. xgsComboWdm(8) -Indicates that the flex mode is XGS/G Combo wdm Pon. 8. twdmpon(9) -Indicates that the flex mode is TWDM-Pon. 9. invalid(-1) -Indicates that the query fails or no information is detect.
| ||||
| ChwGponPortControlDbaLowlatency | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the low latency switch. Options: 1. enable(1) -Indicates that the lowlatency is enable 2. disable(0) -Indicates that the lowlatency is disable 3. invalid(-1) -Indicates that the query fails or no information is detected
| ||||
| ChwGponPortControlLightTestTimeduration | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current This object is used to configure the time duration of light test, 0s ~ 3600s, 0s means stopping the testing immidiately
| ||||
| ChwGponPortControlLightTestTestStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the laser test status. Options: 1. enable(1) - laser tx is enable 2. disable(2) - laser tx is disable 3. invalid(-1) Default:invalid(-1).
| ||||
| ChwGponPortControlLightTestFinshStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the laser status after the test is completed. Options: 1. enable(1) - laser tx is enable 2. disable(2) - laser tx is disable 3. original(3) - returned to its original status 4. invalid(-1) Default:invalid(-1).
| ||||
| ThwXponDeviceOntActiveAlarmTable | 1.3.6.1.4.1.2011.6.145.1.1.1.16 | NA | ||
table · not-accessible · current The hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponDeviceOntActiveAlarmEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.16.1 | NA | ||
row · not-accessible · current The hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponDeviceOntActiveAlarmNum | 1.3.6.1.4.1.2011.6.145.1.1.1.16.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the active alarm number about ONT. | ||||
| ChwXponDeviceOntActiveAlarmList | 1.3.6.1.4.1.2011.6.145.1.1.1.16.1.2 | OCTET STRING (SIZE (0..400)) | RO | |
column · OCTET STRING (SIZE (0..400)) · read-only · current This object indicates the active alarm list about ONT. This list supports a maximum number of 100 ONT alarms and each alarm ID has 4 bytes | ||||
| ChwXponDeviceOntPortActiveAlarmNum | 1.3.6.1.4.1.2011.6.145.1.1.1.16.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates active alarm number about ONT ports. | ||||
| ChwXponDeviceOntPortActiveAlarmList | 1.3.6.1.4.1.2011.6.145.1.1.1.16.1.4 | OCTET STRING (SIZE (0..600)) | RO | |
column · OCTET STRING (SIZE (0..600)) · read-only · current This object indicates the active alarm list about ONT ports. This list supports a maximum number of 100 ONT alarms and each ONT port alarm has 6 bytes, including ONT port type (1 byte), ONT port ID (1 byte), alarm ID (4 bytes). The ONT port type value list: The value (13) indicates that the port type is T1, The value (14) indicates that the port type is E1, The value (32) indicates that the port type is POTS, The value (47) indicates that the port type is ETH, The value (48) indicates that the port type is CATV. | ||||
| ThwXponOntIpConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.17 | NA | ||
table · not-accessible · current The ONT IP config table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntIpIndex. | ||||
| RhwXponOntIpConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1 | NA | ||
row · not-accessible · current The ONT IP config table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntIpIndex. | ||||
| ChwXponOntIpIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The IP index of the ont IP host. | ||||
| ChwXponOntIpConfigMode | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current IP configuration mode. Options: 1. dhcp(1) - Indicates the dynamic allocation mode 2. static(2) - Indicates the static allocation mode 3. nonOLTconfiguration(3) - Indicates the nonOLTconfiguration mode(IP configuration mode is not set in the OLT) 4. pppoe(4) - Indicates the pppoe allocation mode
| ||||
| ChwXponOntIpConfigVlan | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The VLAN of ONT IP host. range: 0-4095 | ||||
| ChwXponOntIpConfigPriority | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The priority of ONT IP host. range: 0-7, 0xfe: dscp-mapping. | ||||
| ChwXponOntIpconfigDscpDefaultPriority | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current The default priority for dscp-mapping policy. range: 0-7 | ||||
| ChwXponOntIpconfigDscpProfIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The dscp profile index of the ONT ip host, and the range is 1~50 | ||||
| ChwXponOntIpAddress | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.7 | IpAddress | RW | |
column · IpAddress · read-write · current ONT ip address. | ||||
| ChwXponOntNetMask | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.8 | IpAddress | RW | |
column · IpAddress · read-write · current Subnet mask. | ||||
| ChwXponOntNetGateway | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.9 | IpAddress | RW | |
column · IpAddress · read-write · current The default network gateway. | ||||
| ChwXponOntMasterDNS | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.10 | IpAddress | RW | |
column · IpAddress · read-write · current The active DNS address. | ||||
| ChwXponOntSlaveDNS | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.11 | IpAddress | RW | |
column · IpAddress · read-write · current The slave DNS address. | ||||
| ChwXponOntIpConfigPppoeAccountMode | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current The input method of pppoe user account. Options: 1. oltcfg(1) - Indicates the user account is input on the ont 2. ontcfg(2) - Indicates the user account is input on the olt 3. invalid(-1) - Indicates that the query fails
| ||||
| ChwXponOntIpConfigPppoeUserName | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.13 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current The username of the pppoe allocation mode. | ||||
| ChwXponOntIpConfigPppoePassword | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.14 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current The password of the pppoe allocation mode. | ||||
| ChwXponOntIpconfigDhcpReset | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used for resetting the ip host in the DHCP mode. Options: 1. reset(1) - DHCP reset in the DHCP mode 2. invalid(-1) - invalid
| ||||
| ChwXponOntIpconfigRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.16 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponOntIpconfigRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ChwXponOntIpconfigVlanMode | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the vlan mode. Options: 1. transparent(1) - Indicates that the VLAN mode is transparent 2. single(2) - Indicates that the VLAN mode is single tag 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntIpConfigPppoeAuthentication | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the pppoe authentication mode. Options: 1. auto(1) - Indicates that the pppoe authentication mode is auto 2. pap(2) - Indicates that the pppoe authentication mode is pap 3. chap(3) - Indicates that the pppoe authentication mode is chap 4. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntIpConfigUsedWanProfName | 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.19 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object indicates the name of wan profile that is bound to the ONT | ||||
| ThwXponOntCapabilityInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.18 | NA | ||
table · not-accessible · current The ont info table. This table is used to query capability of the ont. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntCapabilityInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.18.1 | NA | ||
row · not-accessible · current The ont info table. This table is used to query capability of the ont. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntSupportVoipCfgMethod | 1.3.6.1.4.1.2011.6.145.1.1.1.18.1.1 | Bits | RO | |
column · Bits · read-only · current This parameter indicates the voip configuration mode that the ONT supports. This BITS structure can report the following status: 1. omcioam(0) - This bit position positively reports that the ONT supports omci/oam configuration mode 2. configurationFile(ftp)(1) - This bit position positively reports that the ONT supports configurationFile(ftp) configuration mode 3. tr069(2) - This bit position positively reports that the ONT supports tr069 configuration mode
| ||||
| ChwXponOntSupportVoipSignalProtocol | 1.3.6.1.4.1.2011.6.145.1.1.1.18.1.2 | Bits | RO | |
column · Bits · read-only · current This parameter indicates the voip signal protocol that the ONT supports. This BITS structure can report the following status: 1. sip(0) - This bit position positively reports that the ONT supports SIP Protocol 2. h248(1) - This bit position positively reports that the ONT supports H.248 Protocol 3. mgcp(2) - This bit position positively reports that the ONT supports MGCP Protocol
| ||||
| ChwXponOntSupportSingleRingCheck | 1.3.6.1.4.1.2011.6.145.1.1.1.18.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether the ONT supports the single ring check. Options: 1. support(1) - The value (1) indicates that the ONT supports the single ring check. 2. notSupport(2) - The value (2) indicates that the ONT not supports the single ring check. 3. invalid(-1) - The value (-1) indicates that the query fails or no information is detected.
| ||||
| ThwXponOntPowerSheddingStatusQueryTable | 1.3.6.1.4.1.2011.6.145.1.1.1.19 | NA | ||
table · not-accessible · current The hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntPowerSheddingStatusQueryEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.19.1 | NA | ||
row · not-accessible · current The hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponDeviceOntPowerSheddingStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.19.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Binary indication of power shedding status for each shedding class.
The ONU sets each bit to 1 when power shedding is active, and clears it to 0 when the service is restored.
bit0: Data class
bit1: Voice class
bit2: Video overlay class
bit3: Video return class
bit4: DSL class
bit5: ATM class
bit6: CES class
bit7: Frame class
bit8: Sdh-sonet class
bit[15,9]: Reserved and set to 0
others: Unconcern | ||||
| ThwGponDeviceOntCapabilityInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.20 | NA | ||
table · not-accessible · current The ont capability table. This table is used to query capability of the gpon ont. The indexes of this table are ifIndex and hwGponDeviceOntObjIndex. | ||||
| RhwGponDeviceOntCapabilityInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1 | NA | ||
row · not-accessible · current The ont capability table. This table is used to query capability of the gpon ont. The indexes of this entry are ifIndex and hwGponDeviceOntObjIndex. | ||||
| ChwGponDeviceOntCapInfoEquipmentID | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.1 | OCTET STRING (SIZE (0..20)) | RO | |
column · OCTET STRING (SIZE (0..20)) · read-only · current The ONT equipment ID. | ||||
| ChwGponDeviceOntCapInfoUplinkPonPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of uplink PON ports. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoPotsPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of POTS ports. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoEthPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of ETH ports. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoTdmPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of TDM ports. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoMocaPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of MOCA ports. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoCatvAniPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of CATV ANI ports. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoCatvUniPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of CATV UNI ports. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoGemPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of GEM ports. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoIpConfigurationMode | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The mode of IP configuration. Options: 1. notsupport(1) - Not support 2. support(2) - Support 3. dhcp(3) - DHCP mode 4. static(4) - Static mode 5. invalid(-1) - Indicates the invalid value
| ||||
| ChwGponDeviceOntCapInfoTrafficSchedulerNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of the traffic scheduler. | ||||
| ChwGponDeviceOntCapInfoTcontNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of T-CONTs. -1 indicates the invalid value. | ||||
| ChwGponDeviceOntCapInfoTypeOfFlowControl | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the ONT flow control. Options: 1. pq(1) - PQ 2. gemportcar(2) - GEMPORT CAR 3. flowcar(3) - FLOW CAR 4. gemportcarandpq(4) - GEMPORT CAR and PQ 5. gemportcarorpq(5) - GEMPORT CAR or PQ 6. invalid(-1) - Indicates the invalid value
| ||||
| ChwGponDeviceOntCapInfoDeviceType | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the ONT type. Options: 1. sfu(1) - The ONT type is SFU 2. hgu(2) - The ONT type is HGU 3. sbu(3) - The ONT type is SBU 4. cbu(4) - The ONT type is CBU 5. mdu(5) - The ONT type is MDU 6. mtu(6) - The ONT type is MTU 7. sfu1fe1pots(7) - The ONT type is SFU(1FE+1POTS) 8. invalid(-1) - Indicates the invalid value
| ||||
| ChwGponDeviceOntCapInfoPowerSupplyControl | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates if the ONT supports the power control. Options: 1. notsupport(1) - The ONT doesn't support the power control 2. support(2) - The ONT supports the power control 3. txrxcoupling(3) - The ONT supports the power control.The TX and RX are coupling 4. txrxindependent(4) - The ONT supports the power control.The TX and RX are independent 5. invalid(-1) - Indicates the invalid value
| ||||
| ChwGponDeviceOntCapInfoExtOmciMsgFormat | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates if the ONT supports Extended OMCI message format. Options: 1. notsupport(1) - The ONT doesn't support the Extended OMCI message format 2. support(2) - The ONT supports the Extended OMCI message format 3. invalid(-1) - Indicates the invalid value
| ||||
| ChwGponDeviceOntCapInfoNumberOfPqInTcont | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.17 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current This object indicates the number of PQs in T-CONT. | ||||
| ChwGponDeviceOntCapInfoEthOamSupport | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates if the ONT supports the type of ETHOAM by each bit. The ONT sets each bit to 1 when the ONT supports the type of ETHOAM. bit0: Y.1731 bit[31,1]: Reserved and set to 0 | ||||
| ChwGponDeviceOntCapInfoVdslPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of VDSL ports. -1 indicates the invalid value. | ||||
| ChwGponOntSupportMulticastEncrypt | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current This parameter indicates the capability of multicast encrypt that the ONT supports. Options: 1. notsupport(1) - Indicates that the ONT doesn't support the multicast encrypt. 2. support(2) - Indicates that the ONT supports the multicast encrypt. 3. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwGponDeviceOntCapInfoWifiPortNum | 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of WiFi ports. -1 indicates the invalid value. | ||||
| ThwXponDeviceOtdrTestTable | 1.3.6.1.4.1.2011.6.145.1.1.1.21 | NA | ||
table · not-accessible · current This table is used for the OTDR testing. The index of this table is ifIndex. | ||||
| RhwXponDeviceOtdrTestEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1 | NA | ||
row · not-accessible · current This table is used for the OTDR testing. The index of this entry is ifIndex.
| ||||
| ChwXponDeviceOtdrTestOper | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current OTDR test operation of a port. Options: 1. start(1) - Indicates that the OTDR test is started on the port. 2. stop(2) - Indicates that the OTDR test is stopped on the port. 3. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponDeviceOtdrTestStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The state of OTDR test. Options: 1. untested (1) - Indicates that the OTDR test is not performed for the port. 2. testing (2) - Indicates that the OTDR test is being performed for the port. 3. testFinish (3) - Indicates that the OTDR test is complete.
| ||||
| ChwXponDeviceOtdrTestResult | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the result of OTDR test. Options: 1. Success(1) - Indicates that the OTDR test successfully. 2. FtpFail(2) - Indicates that the result file of OTDR test upload failed. 3. BoardFail(3) - Indicates that the board is faulty during the test. 4. OpticalModuleFail(4) - Indicates that the optical module is faulty during the test. 5. PortShutdown(5) - Indicates that the port is shutdown during the test. 6. SystemSwitchOver(6) - Indicates that the system switchover occurs during the test. 7. BoardloadFail(7) - Indicates that the result file of OTDR test upload to mainboard failed. 8. BoardTypeBswitch(8) - Indicates that the board switch over for TYPE B. 9. unknow(240) - Indicates that an unknown error occurs during the test. 10. invalid(-1) - Indicates that the query fails or no information is detected. | ||||
| ChwXponDeviceOtdrTestWave | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Test wave for the OTDR test. Options: 1.upWave(1) - Indicates that the upstream wavelength is selected for the OTDR test. 2.downWave(2) - Indicates that the downstream wavelength is selected for the OTDR test. 3.all(3) - Indicates that both the upstream and downstream wavelengths are selected for the OTDR test. 4.independant(4) - Indicates that the independent wavelength is selected for the OTDR test 5.invalid(-1) - Indicates that the query fails or no information is detected. Default:downWave(2).
| ||||
| ChwXponDeviceOtdrTestPulseWidth | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Pulse width of test signals. Unit: 0.01ns The value of this node can be -1 indicates that query fails or no information is detected. Default:2500.
| ||||
| ChwXponDeviceOtdrClockRate | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Clock rate of the OTDR test. Options: 1.fortyMHz(1) - Indicates that the clock rate of the OTDR test is 40 MHz, at which, the system works in the low power consumption mode. 2.eightyMHz(2) - Indicates that the clock rate of the OTDR test is 80 MHz, at which, the system works in the high resolution mode. 3.invalid(-1) - Indicates that the query fails or no information is detected. The clock rate is determined by hardware.
| ||||
| ChwXponDeviceOtdrTestSignalType | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Type of sent OTDR test signals. Options: 1.singlePulse(1) - Indicates single pulse 2.singlePnSequence(2) - Indicates single PN sequence. 3.singleGrayCodeSequence(3) - Indicates single gray code sequence. 4.consecutivePnSequence(4) - Indicates consecutive PN sequence. 5.consecutiveGrayCodeSequence(5) - Indicates consecutive gray code sequence. 6.invalid(-1) - Indicates that the query fails or no information is detected. Default: consecutiveGrayCodeSequence(5).
| ||||
| ChwXponDeviceOtdrTestFreq | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Sampling frequency of the OTDR test; Fclk indicates the clock frequency. Options: 1.doubleFclk(1) - Indicates that the sampling frequency of OTDR test is 2 x Fclk. 2.fclk(2) - Indicates that the sampling frequency of OTDR test is Fclk. 3.halfFclk(3) - Indicates that the sampling frequency of OTDR test is 1/2 x Fclk. 4.quarterFclk(4) - Indicates that the sampling frequency of OTDR test is 1/4 x Fclk. 5.eighthFclk(5) - Indicates that the sampling frequency of OTDR test is 1/8 x Fclk. 6.invalid(-1) - Indicates that the query fails or no information is detected. Default:quarterFclk(4).
| ||||
| ChwXponDeviceOtdrTestFilterSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Enable status of the OTDR FIR filter. Options: 1.enable(1) - Indicates that the OTDR FIR filter is enabled. 2.disable(2) - Indicates that the OTDR FIR filter is disabled. 3.invalid(-1) - Indicates that the query fails or no information is detected. Default:enable(1).
| ||||
| ChwXponDeviceOtdrTestFilterMode | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Parameter configuration principle of the FIR filter. Options: 1.systemDefault(1) - Indicates that the system default parameters are used for the FIR filter. 2.issuedParameters(2) - Indicates that the issued parameters are used for the FIR filter. 3.invalid(-1) - Indicates that the query fails or no information is detected. Default:systemDefault(1).
| ||||
| ChwXponDeviceOtdrTestFilterPara | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.11 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Parameters of the FIR filter. If the parameter of hwXponDeviceOtdrTestFilterMode is set to the issued parameter, this parameter is forwarded to the OTDR chip. The first character of this node represents the number of parameters. Starting from the second character, these characters represent parameters. Every four characters (32 bits) from left to right represent a parameter. If a parameter is set with invalid value FFFFFFFF, its default value will be issued. Default values of parameters are as follows: 0x00C5AC58,0x0208F564,0x049C37F2,0x090BF767,0x0F72A0E4,0x17065730,0x1E03A4E2,0x224243C2. | ||||
| ChwXponDeviceOtdrTestAverageTime | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Average sampling times for OTDR test. Options: 1.thirtySeconds(1) - Indicates that the OTDR test is executed every 30 seconds. 2.oneMinute(2) - Indicates that the OTDR test is executed every 1 minute. 3.twoMinutes(3) - Indicates that the OTDR test is executed every 2 minutes. 4.threeeMinutes(4) - Indicates that the OTDR test is executed every 3 minutes. 5.sixMinutes(5) - Indicates that the OTDR test is executed every 6 minutes. 6.thirtyMinutes(6) - Indicates that the OTDR test is executed every 30 minutes. 7.invalid(-1) - Indicates that the query fails or no information is detected. Only test time is issued for this node, and the test times are calculated by the board. The board queries the test status of the optical module after the test time elapses. If the test is complete, the board reads the data. Otherwise, the board will retry to query the test status of the optical module for three times. If the test is always not complete, the test will be canceled, and a failure message will be returned. Default:thirtySeconds(1).
| ||||
| ChwXponDeviceOtdrTestOpticalFibreLength | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current Length of the optical fiber to be tested. Options: 1.(1) - Indicates that the length of the optical fiber to be tested is 5 km. 2.(2) - Indicates that the length of the optical fiber to be tested is 10 km. 3.(3) - Indicates that the length of the optical fiber to be tested is 20 km. 4.(4) - Indicates that the length of the optical fiber to be tested is 30 km. 5.(5) - Indicates that the length of the optical fiber to be tested is 40 km. 6.(6) - Indicates that the length of the optical fiber to be tested is 80 km. 7.(-1) - Indicates that the query fails or no information is detected. The length of the optical fiber to be tested is displayed as the value selected by the user. However, the actual length equals the value selected by the user plus 10 km in background processing. Default:4(30km). | ||||
| ChwXponDeviceOtdrTestDownPowerUsage | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current Modulation depth of downstream test signals Currently, this value can be set to 10, 20, 30, 40, 50 and 100. which indicates that the modulation depth is 10%, 20%, 30%, 40%, 50% and 100%. The vlaue of this node can be -1 indicates that query fails or no information is detected. Default:10 | ||||
| ChwXponDeviceOtdrUpTestMode | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Upstream test mode. Options: 1.onlineTest(1) - Indicates that the upstream test mode is online test. 2.quickTest(2) - Indicates that the upstream test mode is quick test. 3.invalid(-1) - Indicates that the query fails or no information is detected. Based on the selected test mode, the OLT can determine, work out the regularity of sending Trig signals and configure the optical module. Currently, this node cannot be configured.
| ||||
| ChwXponDeviceOtdrServerIpAddress | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.16 | IpAddress | RW | |
column · IpAddress · read-write · current The destination IP address of the OTDR. The vlaue of this node can be FFFFFFFF indicates that query fails or no information is detected. | ||||
| ChwXponDeviceOtdrProtocol | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Transfer protocol of test result. Options: 1.ftp(1) - Indicates that the test result file transfer mode is ftp. 2.tftp(2) - Indicates that the test result file transfer mode is tftp. 3.sftp(3) - Indicates that the test result file transfer mode is sftp. 4.invalid(-1) - Indicates that the query fails or no information is detected. Default:ftp(1).
| ||||
| ChwXponDeviceOtdrUserName | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.18 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current The user name of OTDR test. | ||||
| ChwXponDeviceOtdrPassword | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.19 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current The password of OTDR test. | ||||
| ChwXponDeviceOtdrFilePath | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.20 | OCTET STRING (SIZE (0..256)) | RW | |
column · OCTET STRING (SIZE (0..256)) · read-write · current The file path of OTDR test. | ||||
| ChwXponDeviceOtdrTestFilterOrder | 1.3.6.1.4.1.2011.6.145.1.1.1.21.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current Value of the FIR filter order. Options: 1.fifteenOrder(1) - Indicates that the FIR filter order is fifteen. 2.sixteenOrder(2) - Indicates that the FIR filter order is sixteen. 3.invalid(-1) - Indicates that the query fails or no information is detected. Default:fifteenOrder(1).
| ||||
| ThwXponOpticsDdmInfoExTable | 1.3.6.1.4.1.2011.6.145.1.1.1.22 | NA | ||
table · not-accessible · current This table supports the query of the information about the optical transceiver. The index of this table is ifIndex. | ||||
| RhwXponOpticsDdmInfoExEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1 | NA | ||
row · not-accessible · current This table supports the query of the information about the optical transceiver. The index of this entry is ifIndex.
| ||||
| ChwXponOpticsDdmInfoExTemperatureHighAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTemperatureLowAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTemperatureHighWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTemperatureLowWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExSupplyVoltageHighAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExSupplyVoltageLowAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExSupplyVoltageHighWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExSupplyVoltageLowWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTxBiasCurrentHighAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTxBiasCurrentLowAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTxBiasCurrentHighWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTxBiasCurrentLowWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTxPowerHighAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTxPowerLowAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTxPowerHighWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExTxPowerLowWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExRxPowerHighAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExRxPowerLowAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExRxPowerHighWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExRxPowerLowWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxBiasCurrent | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current Current of the 10G EPON optical transceiver. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxBiasCurrentHighAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the 10G EPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxBiasCurrentLowAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the 10G EPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxBiasCurrentHighWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the 10G EPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxBiasCurrentLowWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the 10G EPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxPower | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current Tx optical power of the 10G EPON optical transceiver. Unit: 0.01dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxPowerHighAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the 10G EPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxPowerLowAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.28 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the 10G EPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxPowerHighWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.29 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the 10G EPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoEx10GTxPowerLowWarningThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.30 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the 10G EPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExCatvRxPowerHighAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.31 | Integer32 | RO | |
column · Integer32 · read-only · current Upper AlarmThreshold threshold of the CATV Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExCatvRxPowerLowAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.32 | Integer32 | RO | |
column · Integer32 · read-only · current Lower AlarmThreshold threshold of the CATV Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExModuleType | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current Options: 1. gpon(1) - GPON 2. epon(2) - EPON 3. epon10g(3) - 10G EPON 4. gpon10g(4) - 10G GPON 5. wdmpon(5) - WDM PON 6. hybridpon(6) - hybrid PON 7. gponepon(7) - GPON/EPON 8. unknown(8) - Unknown 9. xgspon(9) - XGS-PON 10.gponandxgpon(10) - GPON+XG-PON 11.gponandxgspon(11)- GPON+XGS-PON 12.twdmpon(15) - TWDM-PON 13.invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExSubType | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current Options: 1. classbplus(1) - CLASS B+ 2. classcplus(2) - CLASS C+ 3. classb(3) - CLASS B 4. classcplusplus(4) - CLASS C++ 5. classd(5) - CLASS D 6. n2a(33) - N2a 7. n2b(34) - N2b 8. n1(35) - N1 9. e1(36) - E1 10. e2a(37) - N2a 11. e2b(38) - N2b 12. d1(40) - D1 13. d2(41) - D2 14. n2(42) - N2 15. e2(43) - E2 16. px20(65) - PX20 17. px20plus(66) - PX20+ 18. px20plusplus(67) - PX20++ 19. pr30(97) - PR30 20. pr20(98) - PR20 21. prx30(99) - PRX30 22. prx20(100) - PRX20 23. prx40(101) - PRX40 24. pr40(102) - PR40 25. prx30e(103) - PRX30-E 26. prx40e(104) - PRX40-E 27. pr30plus(105) - PR30+ 28. classbPlusAndPx20Plus(129) - GPON CLASS B+/EPON PX20+ 29. classbAndPx20(130) - GPON CLASS B/EPON PX20 30. unknown(145) - Unknown 31. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExPrecision | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.35 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the precision of optical power. Unit: 0.1dBm Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExEncapsulationType | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.36 | INTEGER | RO | |
column · INTEGER · read-only · current Options: 1. sff2x5(1) - SFF 2x5 2. sff2x10(2) - SFF 2x10 3. sfp(3) - SFP 4. xfp(4) - XFP 5. lxfp(5) - LXFP 6. bosaonboard(6) - BOSA ON BOARD 7. unknown(7) - Unknown 8. sfpplus(8) - SFP+ 9. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticsDdmInfoExVendorPN | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.37 | OCTET STRING (SIZE (0..17)) | RO | |
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the part number. | ||||
| ChwXponOpticsDdmInfoExUsedType | 1.3.6.1.4.1.2011.6.145.1.1.1.22.1.38 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the application scenario of the optical transceiver. Options: 1. olt(1) - OLT 2. onu(3) - ONU 3. catvtriplex(4) - CATV TriPlex 4. unknown(5) - Unknown 5. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwXponOpticsParameterRangeTable | 1.3.6.1.4.1.2011.6.145.1.1.1.23 | NA | ||
table · not-accessible · current The xpon optics parameter range table. This table is used to query range of the optics parameter. The indexes of this table are hwXponOpticalModuleType, hwXponOpticalModuleSubType, hwXponOpticalModuleOltOntType, and hwXponOpticalModuleBandwidthType. | ||||
| RhwXponOpticsParameterRangeEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.23.1 | NA | ||
row · not-accessible · current The xpon optics parameter range table. This table is used to query range of the optics parameter. The indexes of this entry are hwXponOpticalModuleType, hwXponOpticalModuleSubType, hwXponOpticalModuleOltOntType, and hwXponOpticalModuleBandwidthType. | ||||
| ChwXponOpticalModuleType | 1.3.6.1.4.1.2011.6.145.1.1.1.23.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the xpon optical module type. Options: 1. gpon(2) - gpon type. 2. epon(3) - epon type. 3. tengepon(4) - 10gepon type. 4. xgpon(5) - xgpon type. 5. wdmpon(6) - wdmpon type. 6. mixpon(7) - mixpon type. 7. gponepondoublemode(8) - gponepondoublemode type.
| ||||
| ChwXponOpticalModuleSubType | 1.3.6.1.4.1.2011.6.145.1.1.1.23.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The xpon optical module sub type.
GPON:0x2 - CLASS B+,
0x3 - CLASS C+,
0x4 - CLASS B,
0x5 - CLASS C++,
0x6 - CLASS D,
EPON:0x2 - PX20,
0x3 - PX20+,
0x4 - PX20++,
10GEPON:0x2 - PR30,
0x3 - PR20,
0x4 - PRX30,
0x5 - PRX20,
0x6 - PRX40,
0x7 - PR40,
0x8 - PRX30E,
0x9 - PRX40E,
0xa - PR30PLUS,
XG-PON:0x2 to 0x5 - reserved,
0x6 - N2a,
0x7 - N2b,
0x8 - N1,
0x9 - E1,
0xA - E2a,
0xB - E2b,
0xC - D1,
0xD - D2,
Gpon and Epon double mode: 0x2 - double mode, compatible with GPON CLASS B+ and EPON PX20+. | ||||
| ChwXponOpticalModuleOltOntType | 1.3.6.1.4.1.2011.6.145.1.1.1.23.1.3 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the xpon optical module olt ont type. Options: 1. olt(2) - olt type. 2. onu(4) - onu type.
| ||||
| ChwXponOpticalModuleBandwidthType | 1.3.6.1.4.1.2011.6.145.1.1.1.23.1.4 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the xpon optical module bandwidth type. Options: 1. bw1g(1) - bw1g type. 2. bw10g(2) - bw10g type.
| ||||
| ChwXponOpticalModuleRxPowerValidValueMax | 1.3.6.1.4.1.2011.6.145.1.1.1.23.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The xpon optical module Rx power maximum valid value, units of 0.01 dBm. | ||||
| ChwXponOpticalModuleRxPowerValidValueMin | 1.3.6.1.4.1.2011.6.145.1.1.1.23.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The xpon optical module Rx power minimum valid value, units of 0.01 dBm. | ||||
| ThwGponInteroperModeConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.24 | NA | ||
table · not-accessible · current This table is used to configure the interoperability mode of the ONT. The indexes of this table are hwGponInteroperModeOntVenderIDInfoIndex, hwGponInteroperModeOntEquipmentIDInfoIndex and hwGponInteroperModeOntSoftwareVersionInfoIndex. | ||||
| RhwGponInteroperModeConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1 | NA | ||
row · not-accessible · current This table is used to configure the interoperability mode of the ONT. The indexes of this entry are hwGponInteroperModeOntVenderIDInfoIndex, hwGponInteroperModeOntEquipmentIDInfoIndex and hwGponInteroperModeOntSoftwareVersionInfoIndex. | ||||
| ChwGponInteroperModeOntVenderIDInfoIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.1 | OCTET STRING (SIZE (1..4)) | NA | |
column · OCTET STRING (SIZE (1..4)) · not-accessible · current This object indicates the vender ID of the ONT. | ||||
| ChwGponInteroperModeOntEquipmentIDInfoIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.2 | OCTET STRING (SIZE (1..20)) | NA | |
column · OCTET STRING (SIZE (1..20)) · not-accessible · current This object indicates the equipment ID of the ONT. 0 indicates that the equipment ID of the ONT is not specified. | ||||
| ChwGponInteroperModeOntSoftwareVersionInfoIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.3 | OCTET STRING (SIZE (1..14)) | NA | |
column · OCTET STRING (SIZE (1..14)) · not-accessible · current This object indicates the software version of the ONT. 0 indicates that the software version of the ONT is not specified. | ||||
| ChwGponInteroperModeSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The switch mode of ONT interoperability. Options: 1. ituT(1) - The switch mode of gpon ONT interoperability is ituT 2. ctc(2) - The switch mode of gpon ONT interoperability is ctc 3. ericV1(3) - The switch mode of gpon ONT interoperability is ericV1 4. ericV2(4) - The switch mode of gpon ONT interoperability is ericV2 5. ituTG984(5) - The switch mode of gpon ONT interoperability is ituTG984 6. ituTG988(6) - The switch mode of gpon ONT interoperability is ituTG988 7. cuc(7) - The switch mode of gpon ONT interoperability is cuc 8. cmcc(8) - The switch mode of gpon ONT interoperability is cmcc 9. eci(9) - The switch mode of gpon ONT interoperability is eci 10. mode1(10) - The switch mode of gpon ONT interoperability is mode1 11. mode2(11) - The switch mode of gpon ONT interoperability is mode2 12. mode2V2(12) - The switch mode of gpon ONT interoperability is mode2V2 13. mode3(13) - The switch mode of gpon ONT interoperability is mode3 14. mode4(14) - The switch mode of gpon ONT interoperability is mode4 15. mode2V3(15) - The switch mode of gpon ONT interoperability is mode2V3 16. mode2V4(16) - The switch mode of gpon ONT interoperability is mode2V4 17. mode5(17) - The switch mode of gpon ONT interoperability is mode5 18. eciV2(18) - The switch mode of gpon ONT interoperability is eciV2 19. mode1V2(19) - The switch mode of gpon ONT interoperability is mode1V2
| ||||
| ChwGponInteroperModeOntMutlicastAuthModeSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The switch mode of gpon ONT multicast authentication. Options: 1. ontControl(1) - The switch mode of gpon ONT multicast authentication is ont-control 2. oltControl(2) - The switch mode of gpon ONT multicast authentication is olt-control
| ||||
| ChwGponInteroperModeActiveMode | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The active mode of gpon ONT interoperability mode. Options: 1. immediate(1) - Indicates that the ONT takes effect immediately 2. nextStartup(2) - Indicates that the ONT takes effect after next startup 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponInteroperModeConfigRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current The hwGponInteroperModeConfigRowStatus is used to create a new row or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ChwGponInteroperModeOntWanConfigMode | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The mode of gpon ont wan config mode. Options: 1. setAfterCreate(1) - The mode of gpon wan config mode is set-after-create 2. setByCreate(2) - The mode of gpon wan config mode is set-by-create
| ||||
| ChwGponInteroperModeOntVlanTagOperMode | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The mode of gpon ont vlan tag operation mode. Options: 1. modifyExternalTag(1) - The mode of gpon vlan tag operation mode is modify-external-tag 2. modifySingleTag(2) - The mode of gpon vlan tag operation mode is modify-single-tag,this is the default mode.
| ||||
| ChwGponInteroperModeAniMVlanFilter | 1.3.6.1.4.1.2011.6.145.1.1.1.24.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the mode of multicast VLAN filtering on the GPON ONT ANI side. Options: 1. default(0) -Indicates the default system behavior. 2. enable(1) -Creates the multicast VLAN tagging filter data entity on the ANI side and issues the multicast VLAN to this entity. 3. disable(2) -Do not create the multicast VLAN tagging filter data entity on the ANI side or issue the multicast VLAN to this entity. The default value is default(0).
| ||||
| ThwXponOltOpticsModuleExtInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.25 | NA | ||
table · not-accessible · current This table is used to query the information about the optical transceiver. The index of this table is ifIndex. | ||||
| RhwXponOltOpticsModuleExtInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.25.1 | NA | ||
row · not-accessible · current This table is used to query the information about the optical transceiver. The index of this entry is ifIndex.
| ||||
| ChwXponOltOpticsModuleInfoRateIdentifier | 1.3.6.1.4.1.2011.6.145.1.1.1.25.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the type of rate select functionality. Options: 1. unspecified (1) - Unspecified 2. rateId4g2g1gRateSelectAs0As1(2) - 4/2/1G Rate_Select & AS0/AS1 3. rateId8g4g2gRxRateSelect (3) - 8/4/2G Rx Rate_Select only 4. rateId8g4g2gTxRateSelect (4) - 8/4/2G Tx Rate_Select only 5. rateId8g4g2gRxTxRateSelect (5) - 8/4/2G Independent Rx & Tx Rate_select 6. rateId16g8g4gRxRateSelect (6) - 16/8/4G Rx Rate_select only 7. rateId16g8g4gRxTxRateSelect (7) - 16/8/4G Independent Rx, Tx Rate_select 8. invalid (-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOltOpticsModuleInfoLength50MicronOM3 | 1.3.6.1.4.1.2011.6.145.1.1.1.25.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the link length supported for 50 um OM3 fiber, units of 10 m. | ||||
| ChwXponOltOpticsModuleInfoCcBaseState | 1.3.6.1.4.1.2011.6.145.1.1.1.25.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the CC_BASE match state. Options: 1. correct (1) - Correct 2. incorrect(2) - Incorrect 3. invalid (-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOltOpticsModuleInfoCcExtState | 1.3.6.1.4.1.2011.6.145.1.1.1.25.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the CC_EXT match state. Options: 1. correct (1) - Correct 2. incorrect(2) - Incorrect 3. invalid (-1) - Indicates that the query fails or no information is detected
| ||||
| ThwGponOntPortServiceCfgTable | 1.3.6.1.4.1.2011.6.145.1.1.1.26 | NA | ||
table · not-accessible · current This table is used to configure the service parameter of the ONT port. The indexes of this table are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPort. | ||||
| RhwGponOntPortServiceCfgEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.26.1 | NA | ||
row · not-accessible · current This table is used to configure the service parameter of the ONT port. The indexes of this entry are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPort. | ||||
| ChwGponOntPortNativeVlan | 1.3.6.1.4.1.2011.6.145.1.1.1.26.1.1 | Integer32 (-1 | 0..4095) | RW | |
column · Integer32 (-1 | 0..4095) · read-write · current This object indicates the native VLAN of the port. | ||||
| ChwGponOntPortNativeVlanPriority | 1.3.6.1.4.1.2011.6.145.1.1.1.26.1.2 | Integer32 (-1 | 0..7) | RW | |
column · Integer32 (-1 | 0..7) · read-write · current This object indicates the native VLAN priority of the port. | ||||
| ChwGponOntPortIgmpForwardMode | 1.3.6.1.4.1.2011.6.145.1.1.1.26.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to enable or disable the switch of ONT port IGMP forward mode. Options: 1. disable(1) - Disable the switch of ONT port IGMP forward mode 2. enable(2) - Enable the switch of ONT port IGMP forward mode 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponOntPortCfgQinqMode | 1.3.6.1.4.1.2011.6.145.1.1.1.26.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to enable or disable the switch of ONT port QinQ transparent transmission mode.. Options: 1. disable(1) - Disable the switch of ONT port QinQ transparent transmission mode 2. enable(2) - Enable the switch of ONT port QinQ transparent transmission mode 3. unconcern(254) - Unconcern QinQ transparent transmission mode The default value is unconcern(254)
| ||||
| ThwXponDeviceOntNoAuthConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.27 | NA | ||
table · not-accessible · current The hwXponDeviceOntNoAuthConfigTable is used to configure the type of ONT to be no authentication. The indexes of this table are hwXponDeviceOntAccessType and hwXponDeviceOntModel. | ||||
| RhwXponDeviceOntNoAuthConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.27.1 | NA | ||
row · not-accessible · current The hwXponDeviceOntNoAuthConfigTable is used to configure the type of ONT to be no authentication. The indexes of this entry are hwXponDeviceOntAccessType and hwXponDeviceOntModel. | ||||
| ChwXponDeviceOntAccessType | 1.3.6.1.4.1.2011.6.145.1.1.1.27.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the ONT access type. Options: 1. gpon(1) - The ONT access type is GPON 2. epon(2) - The ONT access type is EPON
| ||||
| ChwXponDeviceOntModel | 1.3.6.1.4.1.2011.6.145.1.1.1.27.1.2 | OCTET STRING (SIZE (1..20)) | NA | |
column · OCTET STRING (SIZE (1..20)) · not-accessible · current This object indicates the ONT model. | ||||
| ChwXponDeviceOntNoAuthRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.27.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwGponPortInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.28 | NA | ||
table · not-accessible · current GPON port Info table. This table is used to query the GPON/XG-PON port information. The index of this table is ifIndex. | ||||
| RhwGponPortInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.28.1 | NA | ||
row · not-accessible · current GPON port Info table. This table is used to query the GPON/XG-PON port information. The index of this entry is ifIndex.
| ||||
| ChwGponPortMulticastEncryptState | 1.3.6.1.4.1.2011.6.145.1.1.1.28.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Query the Multicast GEM Port encypt switch. Options: 1. off(1) - The Multicast GEM Port encypt switch is not encrypted 2. on(2) - The Multicast GEM Port encypt switch is encrypted 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwGponPortInfoAvailableBwFor2dot5G | 1.3.6.1.4.1.2011.6.145.1.1.1.28.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the available bandwidth for the XG-PON port.
Unit: Kbps.
The value (-1) indicates that the query fails or no information is detected. | ||||
| ChwGponPortInfoAvailableBwFor10G | 1.3.6.1.4.1.2011.6.145.1.1.1.28.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the available bandwidth for the XGS-PON port.
Unit: Kbps.
The value (-1) indicates that the query fails or no information is detected. | ||||
| ChwGponPortRunFlexMode | 1.3.6.1.4.1.2011.6.145.1.1.1.28.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the flex mode of COMBO-PON port. Options: 1. unusable(1) -Indicates that the flex mode is unusable. 2. gpon(2) -Indicates that the flex mode is Gpon. 3. xgpon(3) -Indicates that the flex mode is XG-Pon. 4. xgspon(4) -Indicates that the flex mode is XGS-Pon. 5. xgComboAuto(5) -Indicates that the flex mode is XG/G Combo auto Pon. 6. xgComboWdm(6) -Indicates that the flex mode is XG/G Combo wdm Pon. 7. xgsComboAuto(7) -Indicates that the flex mode is XGS/G Combo auto Pon. 8. xgsComboWdm(8) -Indicates that the flex mode is XGS/G Combo wdm Pon. 9. twdmpon(9) -Indicates that the flex mode is TWDM-PON 10. invalid(-1) -Indicates that the query fails or no information is detect.
| ||||
| ThwEponInteroperModeConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.29 | NA | ||
table · not-accessible · current This table is used to configure the interoperability mode of the EPON ONT. The indexes of this table are hwEponInteroperModeOntVendorIDInfoIndex, hwEponInteroperModeOntModelInfoIndex and hwEponInteroperModeOntSoftwareVersionInfoIndex. | ||||
| RhwEponInteroperModeConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.29.1 | NA | ||
row · not-accessible · current This table is used to configure the interoperability mode of the EPON ONT. The indexes of this entry are hwEponInteroperModeOntVendorIDInfoIndex, hwEponInteroperModeOntModelInfoIndex and hwEponInteroperModeOntSoftwareVersionInfoIndex. | ||||
| ChwEponInteroperModeOntVendorIDInfoIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.29.1.1 | OCTET STRING (SIZE (1..4)) | NA | |
column · OCTET STRING (SIZE (1..4)) · not-accessible · current This object indicates the vender ID of the ONT. | ||||
| ChwEponInteroperModeOntModelInfoIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.29.1.2 | OCTET STRING (SIZE (1..20)) | NA | |
column · OCTET STRING (SIZE (1..20)) · not-accessible · current This object indicates the ont model of the ONT. indicates that the ont model of the ONT is not specified. | ||||
| ChwEponInteroperModeOntSoftwareVersionInfoIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.29.1.3 | OCTET STRING (SIZE (1..16)) | NA | |
column · OCTET STRING (SIZE (1..16)) · not-accessible · current This object indicates the software version of the ONT. 0 indicates that the software version of the ONT is not specified. | ||||
| ChwEponInteroperModeStandard | 1.3.6.1.4.1.2011.6.145.1.1.1.29.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The mode standard of epon ONT interoperability. Options: 1. ctc(1) - The mode standard of epon ONT interoperability is ctc 2. cuc(2) - The mode standard of epon ONT interoperability is cuc
| ||||
| ChwEponInteroperModeActiveMode | 1.3.6.1.4.1.2011.6.145.1.1.1.29.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The active mode of epon ONT interoperability mode. Options: 1. immediate(1) - Indicates that the ONT takes effect immediately 2. nextStartup(2) - Indicates that the ONT takes effect after next startup 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwEponInteroperModeConfigRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.29.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The hwEponInteroperModeConfigRowStatus is used to create a new row or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ChwEponInteroperModeStandardVersion | 1.3.6.1.4.1.2011.6.145.1.1.1.29.1.7 | Integer32 (0..254) | RW | |
column · Integer32 (0..254) · read-write · current This object indicates the oui version of the ONT. 0 indicates that the oui version of the ONT is not specified. 0x21 indicates that the oui version of the ONT is 2.1. | ||||
| ThwXponUnconfiguredRogueOntTable | 1.3.6.1.4.1.2011.6.145.1.1.1.30 | NA | ||
table · not-accessible · current This table is used to query the information about rogue ONTs that is not added. The index of this table is a combination of ifIndex and hwXponUnconfiguredRogueOntIndex. | ||||
| RhwXponUnconfiguredRogueOntEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.30.1 | NA | ||
row · not-accessible · current This table is used to query the information about rogue ONTs that is not added. The index of this entry is a combination of ifIndex and hwXponUnconfiguredRogueOntIndex. | ||||
| ChwXponUnconfiguredRogueOntIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.30.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index of the rogue ONTs which is not added. | ||||
| ChwXponUnconfiguredRogueOntIdentifier | 1.3.6.1.4.1.2011.6.145.1.1.1.30.1.2 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the identifier of rogue ONTs that is not added. | ||||
| ThwXponOntPortConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.31 | NA | ||
table · not-accessible · current This table is used to configure the mac learning switch of teh ont port. The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPhyType and hwXponOntPhyIndex. | ||||
| RhwXponOntPortConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.31.1 | NA | ||
row · not-accessible · current This table is used to configure the mac learning switch of teh ont port. The indexes of this entry are ifIndex, hwXponOntIndex, hwXponOntPhyType and hwXponOntPhyIndex. | ||||
| ChwXponOntPhyType | 1.3.6.1.4.1.2011.6.145.1.1.1.31.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The ONT port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. moca(46) - MOCA 7. eth(47) - ETH 8. iphost(50) - IPHOST
| ||||
| ChwXponOntPhyIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.31.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The ONT port ID. | ||||
| ChwXponOntPortCfgMacLearningSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.31.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the mac learning switch of teh ont port. Options: 1. enable(1) - Indicates that the switch is enabled 2. disable(2) - Indicates that the switch is disabled 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntPortCfgRouteSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.31.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the route switch of ont port. Options: 1. unconcern(0) - Indicates that the switch is unconcern 2. enable(1) - Indicates that the switch is enabled 3. disable(2) - Indicates that the switch is disabled
| ||||
| ChwXponOntPortCfgL2IsolateSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.31.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure Layer 2 isolation for a GPON ONT port.
The default value is unconcern(0).
Options:
1. unconcern(0) - Indicates that the switch is unconcern
2. enable(1) - Indicates that the switch is enabled
3. disable(2) - Indicates that the switch is disabled
4. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwXponOntPortStaticMacTable | 1.3.6.1.4.1.2011.6.145.1.1.1.32 | NA | ||
table · not-accessible · current This table is used to configure the static mac address and vlan of the ONT port. The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPhyType, hwXponOntPhyIndex and hwXponStaticMacIndex. | ||||
| RhwXponOntPortStaticMacEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.32.1 | NA | ||
row · not-accessible · current This table is used to configure the static mac address and vlan of the ONT port. The indexes of this entry are ifIndex, hwXponOntIndex, hwXponOntPhyType, hwXponOntPhyIndex and hwXponStaticMacIndex. | ||||
| ChwXponStaticMacIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.32.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Indicates the index of a static MAC address. The index is used by the software for recording an entry. | ||||
| ChwXponStaticMacVlanID | 1.3.6.1.4.1.2011.6.145.1.1.1.32.1.2 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current The VLAN ID. | ||||
| ChwXponStaticMacMacAddr | 1.3.6.1.4.1.2011.6.145.1.1.1.32.1.3 | MacAddress | RW | |
column · MacAddress · read-write · current Static MAC address of the ONT port. | ||||
| ChwXponStaticMacRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.32.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The hwStaticMacRowStatus is used to create a new row or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntLoadInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.33 | NA | ||
table · not-accessible · current This table is used to load the ONT file. The indexes of this table are ifIndex, hwXponOntNewIndex. | ||||
| RhwXponOntLoadInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.33.1 | NA | ||
row · not-accessible · current This table is used to load the ONT file. The indexes of this entry are ifIndex, hwXponOntNewIndex.
| ||||
| ChwXponOntNewIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.33.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current ONT ID, range: 0-254. | ||||
| ChwXponOntLoadInfoAppFragmentNum | 1.3.6.1.4.1.2011.6.145.1.1.1.33.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the fragment num of of the app load for ONT. The value (-1) indicates that the fragment num is the invalid value. | ||||
| ChwXponOntLoadInfoAppCurrFragment | 1.3.6.1.4.1.2011.6.145.1.1.1.33.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the current fragment index of of the app load for ONT, range: 1~hwXponOntLoadInfoAppFragmentNum. The value (-1) indicates that the fragment index is the invalid value. | ||||
| ThwXponOpticalDdmProfileReferenceTable | 1.3.6.1.4.1.2011.6.145.1.1.1.34 | NA | ||
table · not-accessible · current This table supports the query of the reference thresholds about the optical transceiver. The indexes of this table are hwXponOpticalUseType, hwXponOpticalGradeType, hwXponOpticalType and hwXponOpticalSubType. | ||||
| RhwXponOpticalDdmProfileReferenceEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1 | NA | ||
row · not-accessible · current This table supports the query of the reference thresholds about the optical transceiver. The indexes of this entry are hwXponOpticalUseType, hwXponOpticalGradeType, hwXponOpticalType and hwXponOpticalSubType. | ||||
| ChwXponOpticalUseType | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the application scenario of the optical transceiver. Options: 1. olt(1) - OLT 2. onu(3) - ONU 3. catvtriplex(4) - CATV TriPlex 4. unknown(5) - Unknown
| ||||
| ChwXponOpticalGradeType | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the grade of the optical transceiver. Options: 1. commercial(1) - Commercial grade 2. industrial(2) - Industrial grade
| ||||
| ChwXponOpticalType | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.3 | INTEGER | NA | |
column · INTEGER · not-accessible · current Options: 1. gpon(1) - GPON 2. epon(2) - EPON 3. epon10g(3) - 10G EPON 4. xgpon(4) - Asymmetric XG-PON 5. wdmpon(5) - WDM PON 6. hybridpon(6) - hybrid PON 7. gponepon(7) - GPON/EPON 8. unknown(8) - Unknown 9. xgspon(9) - XGS-PON 10. xgcombopon(10) - XGPON+GPON 11. xgscombopon(11) - XGSPON+GPON
| ||||
| ChwXponOpticalSubType | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.4 | INTEGER | NA | |
column · INTEGER · not-accessible · current Options: 1. classbplus(1) - CLASS B+ 2. classcplus(2) - CLASS C+ 3. classb(3) - CLASS B 4. classcplusplus(4) - CLASS C++ 5. classd(5) - CLASS D 6. n2a(33) - N2a 7. n2b(34) - N2b 8. n1(35) - N1 9. e1(36) - E1 10. e2a(37) - E2a 11. d1(40) - D1 12. d2(41) - D2 13. n2(42) - N2 14. e2(43) - E2 15. px20(65) - PX20 16. px20plus(66) - PX20+ 17. px20plusplus(67) - PX20++ 18. pr30(97) - PR30 19. pr20(98) - PR20 20. prx30(99) - PRX30 21. prx20(100) - PRX20 22. pr40(101) - PR40 23. prx40(102) - PRX40 24. pr30plus(103) - PR30+ 25. classbPlusAndPx20Plus(129) - GPON CLASS B+/EPON PX20+ 26. classbAndPx20(130) - GPON CLASS B/EPON PX20 27. unknown(145) - Unknown
| ||||
| ChwXponOpticalTxAlarmUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTxAlarmLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTxWarnUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTxWarnLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalRxAlarmUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalRxAlarmLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalRxWarnUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalRxWarnLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTxBiasCurrentAlarmUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTxBiasCurrentAlarmLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTxBiasCurrentWarnUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTxBiasCurrentWarnLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalSupplyVoltageAlarmUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalSupplyVoltageAlarmLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalSupplyVoltageWarnUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalSupplyVoltageWarnLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTemperatureAlarmUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTemperatureAlarmLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTemperatureWarnUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOpticalTemperatureWarnLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOptical10GTxAlarmUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the 10G xPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOptical10GTxAlarmLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the 10G xPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOptical10GTxWarnUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the 10G xPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOptical10GTxWarnLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.28 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the 10G xPON optical transceiver Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOptical10GTxBiasCurrentAlarmUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.29 | Integer32 | RO | |
column · Integer32 · read-only · current Upper alarm threshold of the 10G xPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOptical10GTxBiasCurrentAlarmLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.30 | Integer32 | RO | |
column · Integer32 · read-only · current Lower alarm threshold of the 10G xPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOptical10GTxBiasCurrentWarnUpper | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.31 | Integer32 | RO | |
column · Integer32 · read-only · current Upper warning threshold of the 10G xPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOptical10GTxBiasCurrentWarnLower | 1.3.6.1.4.1.2011.6.145.1.1.1.34.1.32 | Integer32 | RO | |
column · Integer32 · read-only · current Lower warning threshold of the 10G xPON optical transceiver bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwXponOntPortVlanExtConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.35 | NA | ||
table · not-accessible · current This table is used to configure the vlan config mode and downstream operation mode of ont port. The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPortVlanExtConfigPhyType and hwXponOntPortVlanExtConfigPhyIndex. | ||||
| RhwXponOntPortVlanExtConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.35.1 | NA | ||
row · not-accessible · current This table is used to configure the vlan config mode and downstream operation mode of ont port. The indexes of this entry are ifIndex, hwXponOntIndex, hwXponOntPortVlanExtConfigPhyType and hwXponOntPortVlanExtConfigPhyIndex. | ||||
| ChwXponOntPortVlanExtConfigPhyType | 1.3.6.1.4.1.2011.6.145.1.1.1.35.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The ONT port type. Options: 1. wifi(40) - WiFi 2. eth(47) - ETH 3. ippath(61) - IPPATH
| ||||
| ChwXponOntPortVlanExtConfigPhyIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.35.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The ONT port ID. | ||||
| ChwXponOntPortVlanConfigMode | 1.3.6.1.4.1.2011.6.145.1.1.1.35.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure vlan config mode of ont port. The configuration takes effect only when the ONT is in mode1 (interoperability mode). Options: 1. extended(1) - Indicates that the vlan config mode is extended mode 2. unconcern(3) - Indicates that the vlan config mode is unconcern 3. invalid(-1) - Indicates that the query fails or no information is detected The default value is unconcern(3)
| ||||
| ChwXponOntPortVlanDownstreamOperMode | 1.3.6.1.4.1.2011.6.145.1.1.1.35.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the vlan downstream operation mode of ont port. The configuration takes effect only when the ONT is in mode1 (interoperability mode). Options: 1. transparentMatch(1) - Indicates to process the VLAN tag of the downstream packets and transparent the packets with matched VLAN tag 2. untagMatch(2) - Indicates to process the VLAN tag of the downstream packets and untag the packets with matched VLAN tag 3. unconcern(3) - Indicates that the vlan downstream operation mode is unconcern 4. invalid(-1) - Indicates that the query fails or no information is detected The default value is unconcern(3)
| ||||
| ThwXponOntPortVlanDiscardTable | 1.3.6.1.4.1.2011.6.145.1.1.1.36 | NA | ||
table · not-accessible · current This table is used to configure the vlan discard mode of ont port. The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPortVlanDiscardPhyType and hwXponOntPortVlanDiscardPhyIndex. | ||||
| RhwXponOntPortVlanDiscardEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.36.1 | NA | ||
row · not-accessible · current This table is used to configure the vlan discard mode of ont port. The indexes of this entry are ifIndex, hwXponOntIndex, hwXponOntPortVlanDiscardPhyType and hwXponOntPortVlanDiscardPhyIndex. | ||||
| ChwXponOntPortVlanDiscardPhyType | 1.3.6.1.4.1.2011.6.145.1.1.1.36.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The ONT port type. Options: 1. wifi(40) - WiFi 2. eth(47) - ETH 3. iphost(50) - IPHOST 4. ippath(61) - IPPATH
| ||||
| ChwXponOntPortVlanDiscardPhyIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.36.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The ONT port ID. | ||||
| ChwXponOntPortVlanDiscardMode | 1.3.6.1.4.1.2011.6.145.1.1.1.36.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure vlan config mode of ont port. The configuration takes effect only when the ONT is in mode1 (interoperability mode). Options: 1. untagged(1) - Indicates that the vlan discard mode is untagged 2. tagged(2) - Indicates that the vlan discard mode is tagged 3. none(3) - Indicates that the vlan discard mode is none 4. unconcern(7) - Indicates that the vlan discard mode is unconcern 5. invalid(-1) - Indicates that the query fails or no information is detected The default value is unconcern(7)
| ||||
| ThwGponBoardWorkModeTable | 1.3.6.1.4.1.2011.6.145.1.1.1.37 | NA | ||
table · not-accessible · current This table is used to configure the board work mode of GPON board. The indexes of this table are hwFrameIndex and hwSlotIndex. | ||||
| RhwGponBoardWorkModeEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.37.1 | NA | ||
row · not-accessible · current This table is used to configure the board work mode of GPON board. The indexes of this entry are hwFrameIndex and hwSlotIndex.
| ||||
| ChwGponBoardWorkMode | 1.3.6.1.4.1.2011.6.145.1.1.1.37.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The GPON board work mode. Options: 1. gpon(1) - GPON work mode 2. xgpon(2) - XGPON work mode 3. xgspon(3) - XGSPON work mode 4. twdmpon(4) - TWDMPON work mode 5. adapt(5) - Adapt work mode 6. invalid(-1) - Invalid work mode Only board H901TWED/H902TWHD/H901FLHF can support to set board work mode currently. The valid options of H901TWED/H902TWHD board are xgspon(3) and twdmpon(4), and the default value is xgspon(3). The valid options of H901FLHF board are twdmpon(4) and adapt(5), and the default value is adapt(5).
| ||||
| ThwXponPortVsResourceTable | 1.3.6.1.4.1.2011.6.145.1.1.1.38 | NA | ||
table · not-accessible · current This table is used to config the resource about ports in virtual system. The indexes of this table are ifIndex and hwXponPortVsId. | ||||
| RhwXponPortVsResourceEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.38.1 | NA | ||
row · not-accessible · current This table is used to config the resource about ports in virtual system. The indexes of this entry are ifIndex and hwXponPortVsId.
| ||||
| ChwXponPortVsId | 1.3.6.1.4.1.2011.6.145.1.1.1.38.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the indexes of virtual system,range: 1-3. The invalid value is -1. | ||||
| ChwXponPortVsMaxOntCount | 1.3.6.1.4.1.2011.6.145.1.1.1.38.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the maximum ONT number of port in virtual system,range: 1-256. The default value is -1. If the value of hwXponPortVsMaxOntCount is set to -1, the limitation will be canceled. | ||||
| ChwXponPortVsMaxGuaranteedBandwidth | 1.3.6.1.4.1.2011.6.145.1.1.1.38.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the maximum guaranteed bandwidth in virtual system, the value must be greater than or equal to 128 but cannot be larger than 10000000.
Unit: kbps
The default value is -1.
If the value of hwXponPortVsMaxGuaranteedBandwidth is set to -1, the limitation will be canceled.
| ||||
| ChwXponPortVsLeftGuaranteedBandwidth | 1.3.6.1.4.1.2011.6.145.1.1.1.38.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the left guaranteed bandwidth of a PON port in virtual system.
Unit: kbps
The invalid value is -1.
| ||||
| ThwGponTwdmChannelGroupTable | 1.3.6.1.4.1.2011.6.145.1.1.1.39 | NA | ||
table · not-accessible · current This table supports the TWDM PON channel group. The index of this table is hwGponTwdmChannelGroupId. | ||||
| RhwGponTwdmChannelGroupEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.39.1 | NA | ||
row · not-accessible · current This table supports the TWDM PON channel group. The index of this entry is hwGponTwdmChannelGroupId. | ||||
| ChwGponTwdmChannelGroupId | 1.3.6.1.4.1.2011.6.145.1.1.1.39.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the ID number of channel group. | ||||
| ChwGponTwdmChannelGroupWorkMode | 1.3.6.1.4.1.2011.6.145.1.1.1.39.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the work mode of channel group. Options: 1. static(1) - static mode 2. dynamic(2) - dynamic mode 3. invalid(-1) - invalid value
| ||||
| ChwGponTwdmChannelGroupMaxChannelNumber | 1.3.6.1.4.1.2011.6.145.1.1.1.39.1.3 | Integer32 (2..8) | RW | |
column · Integer32 (2..8) · read-write · current This object indicates the maximum channel number of channel group, and only can set value when create a channel group, the default value is 4. | ||||
| ChwGponTwdmChannelGroupSelectPolicy | 1.3.6.1.4.1.2011.6.145.1.1.1.39.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the policy of channel group. Options: 1. payAsGrow(1) - pay as grow 2. sharing(2) - sharing 3. invalid(-1) - invalid value
| ||||
| ChwGponTwdmChannelGroupState | 1.3.6.1.4.1.2011.6.145.1.1.1.39.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the state of channel group. Options: 1. online(1) - online 2. offline(2) - offline 3. invalid(-1) - invalid value
| ||||
| ChwGponTwdmChannelGroupDescription | 1.3.6.1.4.1.2011.6.145.1.1.1.39.1.6 | OCTET STRING (SIZE (0..128)) | RW | |
column · OCTET STRING (SIZE (0..128)) · read-write · current This object indicates the description of channel group. | ||||
| ChwGponTwdmChannelGroupRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.39.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. active(1) -indicates that the conceptual row is available for use by the managed device 2. createAndGo(4) -create a new instance of a conceptual row 3. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwGponTwdmChannelMemberTable | 1.3.6.1.4.1.2011.6.145.1.1.1.40 | NA | ||
table · not-accessible · current This table supports the TWDM PON channel group member. The indexes of this table are hwGponTwdmChannelGroupId, hwGponTwdmChannelMemberIndex. | ||||
| RhwGponTwdmChannelMemberEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.40.1 | NA | ||
row · not-accessible · current This table supports the TWDM PON channel group member. The indexes of this entry are hwGponTwdmChannelGroupId, hwGponTwdmChannelMemberIndex. | ||||
| ChwGponTwdmChannelMemberIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.40.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the index of channel group member. | ||||
| ChwGponTwdmChannelMemberRole | 1.3.6.1.4.1.2011.6.145.1.1.1.40.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the role of channel group member. Options: 1. master(1) - master 2. slave(2) - slave 3. invalid(-1) - invalid value
| ||||
| ChwGponTwdmChannelMemberRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.1.40.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. active(1) -indicates that the conceptual row is available for use by the managed device 2. createAndGo(4) -create a new instance of a conceptual row 3. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponPortChannelMaxRateInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.41 | NA | ||
table · not-accessible · current This table supports to get the port second-level peak rate. The indexes of this table are ifIndex, hwXponPortChannelIndex, hwXponPortChannelRateDirection. | ||||
| RhwXponPortChannelMaxRateInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.41.1 | NA | ||
row · not-accessible · current This table supports to get the port second-level peak rate. The indexes of this entry are ifIndex, hwXponPortChannelIndex, hwXponPortChannelRateDirection. | ||||
| ChwXponPortChannelIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.41.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the index of channel, start from 0. | ||||
| ChwXponPortChannelRateDirection | 1.3.6.1.4.1.2011.6.145.1.1.1.41.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the direction of port rate. Options: 1. upstream(1) - upstream direction 2. downstream(2) - downstream direction 3. invalid(-1) - invalid value
| ||||
| ChwXponPortChannelPhysicalRate | 1.3.6.1.4.1.2011.6.145.1.1.1.41.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the maximum rate of the corresponding channel.
Unit: kbps
The invalid value is -1.
| ||||
| ChwXponPortChannelMaxRate | 1.3.6.1.4.1.2011.6.145.1.1.1.41.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the peak rate at the second level within a collection period, in the unit of kbit/s. The invalid value is -1.
| ||||
| ChwXponPortChannelBandwidthUsage | 1.3.6.1.4.1.2011.6.145.1.1.1.41.1.5 | Integer32 (-1 | 0..10000) | RO | |
column · Integer32 (-1 | 0..10000) · read-only · current Indicates the bandwidth usage corresponding to peak rate at the second level, units of 0.01%. The invalid value is -1. | ||||
| ChwXponPortChannelMaxTime | 1.3.6.1.4.1.2011.6.145.1.1.1.41.1.6 | DateAndTime | RO | |
column · DateAndTime · read-only · current Indicates the moment when rate at the second level reaches the peak value.
Format: xxxx (year)-xx(month)-xx(day) xx(hour):xx(min):xx(second)+time zone, character string type.
The format is as follows:
2000-03-12 11:59:14+08:00
A null character string is returned when this leaf is not supported. | ||||
| ThwXponDeviceOntPotsPortStateTable | 1.3.6.1.4.1.2011.6.145.1.1.1.42 | NA | ||
table · not-accessible · current This table is used to query the state of ONT POTS port. The indexes of this table are ifIndex, hwXponOntIndex and hwXponDeviceOntPotsPortId. | ||||
| RhwXponDeviceOntPotsPortStateEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.42.1 | NA | ||
row · not-accessible · current This table is used to query the state of ONT POTS port. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponDeviceOntPotsPortId. | ||||
| ChwXponDeviceOntPotsPortId | 1.3.6.1.4.1.2011.6.145.1.1.1.42.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current ONT POTS port ID. | ||||
| ChwXponDeviceOntPotsPortPTPSrvState | 1.3.6.1.4.1.2011.6.145.1.1.1.42.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port physics running state. Options: 1. normal(1) - Normal state 2. fail(2) - Fail state 3. invalidState(-1) - Returned in case of query failure or error
| ||||
| ChwXponDeviceOntPotsPortPTPAdminState | 1.3.6.1.4.1.2011.6.145.1.1.1.42.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port physics admin state.
Options:
1. lock(1) - All user functions of this circuit pack are blocked, and alarm for this managed entity
are no longer generated
2. unlock(2) - Unlock state, all user functions of this circuit pack are normal
3. shutDown(3) - POTS UNI administrative state is shutdown
4. invalidState(-1) - This value is return when can't query or have some errors in query
| ||||
| ChwXponDeviceOntPotsPortPTPHookState | 1.3.6.1.4.1.2011.6.145.1.1.1.42.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port physics hook state. Options: 1. onHook(1) - ONT POTS port physics is onHook 2. offHook(2) - ONT POTS port physics is offHook 3. invalidState(-1) - Returned in case of query failure or error
| ||||
| ChwXponDeviceOntPotsPortCTPSrvState | 1.3.6.1.4.1.2011.6.145.1.1.1.42.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port service running state. Options: 1. noneOrinitial(1) - None or initial state 2. registered(2) - Registered state 3. inSession(3) - In session 4. failedRegistration(4) - Failed in registration 5. failedInvite(5) - Failed in invite 6. portNotconfigured(6) - Port doesn't configure 7. configDone(7) - Config has been done 8. failedRegistrationBecauseOfIcmpError(8) - Failed in registration because of ICMP errors 9. failedRegistrationBecauseOfFailedTcp(9) - Failed in registration because of TCP errors 10. failedRegistrationBecauseOfFailedAuthentication(10) - Failed in registration because of authentication failure 11. failedRegistrationBecauseOfTimeout(11) - Failed in registration because of timeout 12. failedRegistrationBecauseOfServerFailCode(12) - Failed in registration because of server errors 13. failedInviteBecauseOfIcmpError(13) - Failed to initiate a session because of ICMP errors 14. failedInviteBecauseOfFailedTcp(14) - Failed to initiate a session because of TCP errors 15. failedInviteBecauseOfFailedAuthentication(15) - Failed to initiate a session because of authentication failure 16. failedInviteBecauseOfTimeout(16) - Failed to initiate a session because of timeout 17. failedInviteBecauseOfServerFailCode(17) - Failed to initiate a session because of server errors 18. disabledBySwitch(18) - The service port is prohibited by the call server 19. endLocal(19) - Services are terminated at local because the user disables the port 20. endRemote(20) - Services are terminated at the remote end because the MGC issues commands 21. endAuto(21) - Services are terminated automatically because of MGC faults 22. normal(22) - Services are normal 23. invalidState(-1) - Returned in case of query failure or error
| ||||
| ChwXponDeviceOntPotsPortCTPSrvType | 1.3.6.1.4.1.2011.6.145.1.1.1.42.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port service type. Options: 1. idleOrnone(1) - Idle or none type 2. twoWay(2) - Two way type 3. threeWay(3) - Three way type 4. fax(4) - Fax type 5. telem(5) - Telem type 6. conference(6) - Conference type 7. invalidType(-1) - Invalid type
| ||||
| ChwXponDeviceOntPotsPortCTPSrvCode | 1.3.6.1.4.1.2011.6.145.1.1.1.42.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current ONT POTS port code mode.
Options:
1. pcmu(1) - Audio data is encoded as eight bits per sample, after logarithmic scaling PCMU denotes mu-law scaling.
2. reserved1(2) - Reserved.
3. reserved2(3) - Reserved.
4. gsm(4) - GSM denotes the European GSM 06.10 standard for full-rate
- speech transcoding, ETS 300 961, which is based on RPE/LTP (residual pulse
- excitation/long term prediction) coding at a rate of 13 kb/.
5. g723(5) - Dual-rate speech coder for multimedia communications transmitting at 5.3 and 6.3 kbit/s.
6. dvi4ClockRate8000(6) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was
- specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type,
- and the clock rate is 8000HZ.
7. dvi4ClockRate16000(7) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was
- specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate is 16000HZ.
8. lpc(8) - LPC designates an experimental linear predictive encoding contributed by Ron Frederick,
- which is based on an implementation written by Ron Zuckerman posted to the Usenet group comp.
9. pcma(9) - Audio data is encoded as eight bits per sample, after logarithmic scaling. PCMA denotes A-law scaling.
10. g722(10) - 7 kHz audio-coding within 64 kbit/s.
11. l16TwoChannels(11) - Two channel encoding.
12. l16OneChannel(12) - One channel encoding.
13. qcelp(13) - QCELP CODEC compresses each 20 milliseconds of 8,000 Hz.
14. cn(14) - Comfort Noise.
15. mpa(15) - MPA denotes MPEG-1 or MPEG-2 audio encapsulated as elementary streams.
16. g728(16) - Coding of speech at 16 kbit/s using low-delay code excited linear prediction.
17. dvi4ClockRate11025(17) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified
- by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate is 11025HZ.
18. dvi4ClockRate22050(18) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified
- by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate is 11025HZ.
19. g729(19) - Coding of speech at 8 kbit/s using conjugate structure-algebraic code excited linear prediction.
20. t38(20) - T.38 is used by the IFP peer to verify message alignment. It is identified by an ASN.1 Application tag.
21. g711a(21), - G.711A.
22. g711u(22), - G.711U.
23. g726(23), - G.726.
24. invalidCode(-1) - Invalid code.
| ||||
| ThwGponPortConfigInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.43 | NA | ||
table · not-accessible · current The hwGponPortConfigInfoTable is used to query the information about ports. The index of this table is ifIndex. | ||||
| RhwGponPortConfigInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.43.1 | NA | ||
row · not-accessible · current The hwGponPortConfigInfoTable is used to query the information about ports. The index of this entry is ifIndex.
| ||||
| ChwGponPortConfigInfoLeftBwFor2dot5G | 1.3.6.1.4.1.2011.6.145.1.1.1.43.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the remaining bandwidth of the XGS-PON port or the combo PON port for the ONT with upstream rate 2.5 Gbps. Unit:kbps. The value (-1) indicates that the query fails or no information is detected. | ||||
| ChwGponPortConfigInfoLeftBwFor10G | 1.3.6.1.4.1.2011.6.145.1.1.1.43.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the remaining bandwidth of the XGS-PON port or the combo PON port for the ONT with upstream rate 10 Gbps. Unit:kbps. The value (-1) indicates that the query fails or no information is detected. | ||||
| ThwXponOntAutoPingTable | 1.3.6.1.4.1.2011.6.145.1.1.1.44 | NA | ||
table · not-accessible · current The hwXponOntAutoPingTable is used to start ont auto ping test and query result. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntAutoPingEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.44.1 | NA | ||
row · not-accessible · current The hwXponOntAutoPingTable is used to start ont auto ping test and query result. The indexes of this Entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntAutoPingStart | 1.3.6.1.4.1.2011.6.145.1.1.1.44.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to start the ont auto ping test. options: 1.start(1) - Starts the ont auto ping test. 2.invalid(-1) - Indicates that no information is detected.
| ||||
| ChwXponOntAutoPingResultCode | 1.3.6.1.4.1.2011.6.145.1.1.1.44.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the result of ont auto ping test. Options: 1.success(0) - Indicates the ont auto ping test complete. 2.offline(1) - Indicates the ont is not online. 3.notsupport(2) - Indicates the ont doesn't support this operation. 4.onterror(3) - Indicates the ont process error. 5.nowan(4) - Indicates that no wan ports exist on the ont. 6.invalid(-1) - Indicates that no information is detected.
| ||||
| ChwXponOntAutoPingResultContent | 1.3.6.1.4.1.2011.6.145.1.1.1.44.1.3 | OCTET STRING (SIZE (0..800)) | RO | |
column · OCTET STRING (SIZE (0..800)) · read-only · current This object indicates the information about ont auto ping results. This object consists of type, length, WAN name, IPv4 connection status, IPv4 ping result for gateway, IPv4 ping result for DNS, IPv6 connection status, IPv6 ping result for gateway, IPv6 ping result for DNS. The format of this object is as follows: -------------------------------------------------------------------------------------- |field |field length | field description | -------------------------------------------------------------------------------------- |type |1 |1: type 1 | -------------------------------------------------------------------------------------- |len |2 |total length of the following content | -------------------------------------------------------------------------------------- |WAN name |32 |WAN name | -------------------------------------------------------------------------------------- |IPv4 Connection|1 |IPv4 status 0:unconfigured | |Status | |Description: 1:connecting | | | | 2:connected | | | | 3:pending | | | | 4:disconnecting | | | | 5:disconnected | -------------------------------------------------------------------------------------- |IPv6 Connection|1 |IPv6 status 0:invalid | |Status | |Description: 1:connecting | | | | 2:connected | | | | 3:pending | | | | 4:disconnecting | | | | 5:disconnected | | | | 6:unknown | -------------------------------------------------------------------------------------- | IPv4 ping |1 |ping gateway 0:success | | result for | |result 1:fail | | gateway | |Description: 2:not support | -------------------------------------------------------------------------------------- | IPv6 ping |1 |ping gateway 0:success | | result for | |result 1:fail | | gateway | |Description: 2:not support | -------------------------------------------------------------------------------------- | IPv4 ping |1 |ping DNS 0:success | | result for | |result 1:fail | | DNS | |Description: 2:not support | -------------------------------------------------------------------------------------- | IPv6 ping |1 |ping DNS 0:success | | result for | |result 1:fail | | DNS | |Description: 2:not support | -------------------------------------------------------------------------------------- | ||||
| ChwXponOntAutoPingClearResult | 1.3.6.1.4.1.2011.6.145.1.1.1.44.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to clear the ont auto ping test. Options: 1.clear(1) - Clear ont auto ping test result. 2.invalid(-1) - Indicates the invalid value.
| ||||
| ThwXponPortAutoPingTable | 1.3.6.1.4.1.2011.6.145.1.1.1.45 | NA | ||
table · not-accessible · current The hwXponPortAutoPingTable is used to start auto ping test for all onts under port. The indexes of this table are ifIndex. | ||||
| RhwXponPortAutoPingEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.45.1 | NA | ||
row · not-accessible · current The hwXponPortAutoPingTable is used to start auto ping test for all onts under port. The indexes of this Entry are ifIndex.
| ||||
| ChwXponPortAutoPingStart | 1.3.6.1.4.1.2011.6.145.1.1.1.45.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to start the port auto ping test. options: 1.start(1) - Starts the port auto ping test. 2.invalid(-1) - Indicates that no information is detected.
| ||||
| ChwXponPortAutoPingClearResult | 1.3.6.1.4.1.2011.6.145.1.1.1.45.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to clear the port auto ping test. Options: 1.clear(1) - Clear port auto ping test result. 2.invalid(-1) - Indicates the invalid value.
| ||||
| ThwXponDeviceGetOntInfoByAuthInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.1.46 | NA | ||
table · not-accessible · current This table is used to get ONT information by ONT authentication information. If multiple ONTs match authentication information, only the first one is obtained. The indexes of this table are hwXponDeviceOntAuthMethod and hwXponDeviceOntAuthInfo. | ||||
| RhwXponDeviceGetOntInfoByAuthInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.46.1 | NA | ||
row · not-accessible · current This table is used to get ONT information by ONT authentication information. If multiple ONTs match authentication information, only the first one is obtained. The indexes of this entry are hwXponDeviceOntAuthMethod and hwXponDeviceOntAuthInfo. | ||||
| ChwXponDeviceOntAuthMethod | 1.3.6.1.4.1.2011.6.145.1.1.1.46.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the ONT authentication mode. Options: 1. password(1) - The ONT authentication type is password
| ||||
| ChwXponDeviceOntAuthInfo | 1.3.6.1.4.1.2011.6.145.1.1.1.46.1.2 | OCTET STRING (SIZE (1..36)) | NA | |
column · OCTET STRING (SIZE (1..36)) · not-accessible · current This object indicates the ONT authentication information. | ||||
| ChwXponDeviceGetOntIfindex | 1.3.6.1.4.1.2011.6.145.1.1.1.46.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object is the ifindex of the ONT. | ||||
| ChwXponDeviceGetOntIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.46.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object is the index of the ONT. | ||||
| ThwXponOntOpticalDdmInfoHistoryTable | 1.3.6.1.4.1.2011.6.145.1.1.1.47 | NA | ||
table · not-accessible · current This table is the ont optical Ddm infomation history. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntOpticalDdmInfoRecordIndex. | ||||
| RhwXponOntOpticalDdmInfoHistoryEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.47.1 | NA | ||
row · not-accessible · current This table is the ont optical Ddm infomation history. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntOpticalDdmInfoRecordIndex. | ||||
| ChwXponOntOpticalDdmInfoRecordIndex | 1.3.6.1.4.1.2011.6.145.1.1.1.47.1.1 | Integer32 (0..23) | NA | |
column · Integer32 (0..23) · not-accessible · current ONT optical Ddm infomation ID. | ||||
| ChwXponOntOpticalDdmInfoRecordStartTime | 1.3.6.1.4.1.2011.6.145.1.1.1.47.1.2 | DateAndTime | RO | |
column · DateAndTime · read-only · current The start time for ONT optical info . | ||||
| ChwXponOntOpticalDdmInfoRecordEndTime | 1.3.6.1.4.1.2011.6.145.1.1.1.47.1.3 | DateAndTime | RO | |
column · DateAndTime · read-only · current The end time for ONT optical info . | ||||
| ChwXponOntOpticalDdmOntRxPowerMax | 1.3.6.1.4.1.2011.6.145.1.1.1.47.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The max receiving power of the optical module, unit 0.01dBm.
| ||||
| ChwXponOntOpticalDdmOntRxPowerMin | 1.3.6.1.4.1.2011.6.145.1.1.1.47.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The min receiving power of the optical module, unit 0.01dBm.
| ||||
| ChwXponOntOpticalDdmOltRxPowerMax | 1.3.6.1.4.1.2011.6.145.1.1.1.47.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The max ONT optical power received on the OLT, unit 0.01dBm.
| ||||
| ChwXponOntOpticalDdmOltRxPowerMin | 1.3.6.1.4.1.2011.6.145.1.1.1.47.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The min ONT optical power received on the OLT, unit 0.01dBm.
| ||||
| ThwXponPortOpticConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.1.48 | NA | ||
table · not-accessible · current This table is used to configure the optical module information state. The index of this table is ifIndex. | ||||
| RhwXponPortOpticConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.48.1 | NA | ||
row · not-accessible · current This table is used to configure the optical module information state. The index of this entry is ifIndex.
| ||||
| ChwXponPortOpticVenderIDInfo | 1.3.6.1.4.1.2011.6.145.1.1.1.48.1.1 | OCTET STRING (SIZE (1..4)) | RW | |
column · OCTET STRING (SIZE (1..4)) · read-write · current This object indicates the vender ID of the optical module. | ||||
| ChwXponPortOpticVenderSNInfo | 1.3.6.1.4.1.2011.6.145.1.1.1.48.1.2 | OCTET STRING (SIZE (1..16)) | RW | |
column · OCTET STRING (SIZE (1..16)) · read-write · current This object indicates the vender SN of the optical module. | ||||
| ChwXponPortOpticState | 1.3.6.1.4.1.2011.6.145.1.1.1.48.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The state of optical module. Options: 1. normal(1) - The optical module information state is normal 2. conflict(2) - The optical module information state is conflict
| ||||
| ThwXponPortOpticListTable | 1.3.6.1.4.1.2011.6.145.1.1.1.49 | NA | ||
table · not-accessible · current This table is used to get optical module list. The indexe of this table is hwXponPortOpticListType. | ||||
| RhwXponPortOpticListEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.49.1 | NA | ||
row · not-accessible · current This table is used to get optical module list. The indexe of this table is hwXponPortOpticListType. | ||||
| ChwXponPortOpticListType | 1.3.6.1.4.1.2011.6.145.1.1.1.49.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the optical module list mode. Options: 1. normal(1) - The optical module list mode is normal
| ||||
| ChwXponPortOpticListNum | 1.3.6.1.4.1.2011.6.145.1.1.1.49.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object is the number of the optical module list. | ||||
| ChwXponPortOpticList | 1.3.6.1.4.1.2011.6.145.1.1.1.49.1.3 | OCTET STRING (SIZE (0..8192)) | RO | |
column · OCTET STRING (SIZE (0..8192)) · read-only · current This object is the optical module list, and each optical module takes 20 bytes, include venderID(4 bytes), venderSN(16 bytes) and the most number of optical module is 256. | ||||
| ThwGponBoardFlexLicenseTable | 1.3.6.1.4.1.2011.6.145.1.1.1.50 | NA | ||
table · not-accessible · current Indicates the flex license info of the board. The index of this table is hwFrameIndex and hwSlotIndex. | ||||
| RhwGponBoardFlexLicenseEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.50.1 | NA | ||
row · not-accessible · current Indicates the flex license info of the board. The index of this entry is hwFrameIndex and hwSlotIndex.
| ||||
| ChwXponBoardFlexLvl1PortLicenseNum | 1.3.6.1.4.1.2011.6.145.1.1.1.50.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the number of flex2.0 pon ports board Gpon mode. | ||||
| ChwXponBoardFlexLvl2PortLicenseNum | 1.3.6.1.4.1.2011.6.145.1.1.1.50.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the number of flex2.0 pon ports board 10G Gpon(XG/XGS/Combo) mode. | ||||
| ChwXponBoardFlexLvl3PortLicenseNum | 1.3.6.1.4.1.2011.6.145.1.1.1.50.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the number of flex2.0 pon board using TWDM PON mode. | ||||
| ThwXponOntDIDOTable | 1.3.6.1.4.1.2011.6.145.1.1.1.51 | NA | ||
table · not-accessible · current Indicates the DI/DO state of the ONT and control the switch of the ONT DI Trap Reporting. The index of this table is ifIndex and hwXponOntIndex. | ||||
| RhwXponOntDIDOEntry | 1.3.6.1.4.1.2011.6.145.1.1.1.51.1 | NA | ||
row · not-accessible · current Indicates the DI/DO state of the ONT and control the switch of the ONT DI Trap Reporting. The index of this entry is ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntDITrapSwitch | 1.3.6.1.4.1.2011.6.145.1.1.1.51.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The switch value of ONT DI Trap Reporting. Options: 1. enable(1) - The switch value of ONT DI Trap Reporting is enable. 2. disable(2) - The switch value of ONT DI Trap Reporting is disable. 3. invalid(-1) - Indicates that the query fails or no information is detected. The default value is enable(1).
| ||||
| ChwXponOntDIState | 1.3.6.1.4.1.2011.6.145.1.1.1.51.1.2 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current When query the ONT DI status, returns the status of all DI ports at a time. The first byte indicates the number of ports (0~127). Each two byte indicates the state of a port, with the first byte indicating the port index and the second byte indicating the DI state. Port index (1 Byte); Port status (1 Byte): 0- low level, 1- high level. | ||||
| ChwXponOntDOState | 1.3.6.1.4.1.2011.6.145.1.1.1.51.1.3 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current When query the ONT DO status, returns the status of all DO ports at a time. The first byte indicates the number of ports (0~127). Each two byte indicates the state of a port, with the first byte indicating the port index and the second byte indicating the DO state. Port index (1 Byte); Port status (1 Byte): 0- low level, 1- high level. | ||||
| NhwXponCommonStatisticObjects | 1.3.6.1.4.1.2011.6.145.1.1.2 | |||
| ThwGponDevicePotsPortStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.1 | NA | ||
table · not-accessible · current VOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPhyIndex. | ||||
| RhwGponDevicePotsPortStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1 | NA | ||
row · not-accessible · current VOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPhyIndex. | ||||
| ChwGponDeviceOntPhyIndex | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Port index of the ONT. | ||||
| ChwGponDevicePotsStatisticRtpError | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of RTP packet errors. | ||||
| ChwGponDevicePotsStatisticPacketLoss | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of the fraction of packets lost. | ||||
| ChwGponDevicePotsPortMaxJitter | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum jitter identified during the measured interval. | ||||
| ChwGponDevicePotsPortMaxTimeRTCP | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum time between RTCP packets. | ||||
| ChwGponDevicePotsStatisticUnderFlowBuff | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of times the reassembly buffer underflows. | ||||
| ChwGponDevicePotsStatisticOverFlowBuff | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of times the reassembly buffer overflows. | ||||
| ChwGponDevicePotsStatisticCallSetupFails | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of call setup failures. | ||||
| ChwGponDevicePotsPortCallSetupTimer | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current The longest duration of a single call setup detected during this interval. | ||||
| ChwGponDevicePotsStatisticCallTerminateFails | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of calls that were terminated with cause. | ||||
| ChwGponDevicePotsStatisticAnalogPortRelease | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of analog port releases without dialling detected. | ||||
| ChwGponDevicePotsPortAnalogPortOffHookTimer | 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current The longest period of a single off-hook detected on the analog port. | ||||
| ThwGponOntPerfCurr15MinDataTable | 1.3.6.1.4.1.2011.6.145.1.1.2.2 | NA | ||
table · not-accessible · current Ont performance monitor statistic table. This table is used to query ont statistic in the current 15 minutes. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwGponOntPerfCurr15MinDataEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1 | NA | ||
row · not-accessible · current Ont performance monitor statistic table. This table is used to query ont statistic in the current 15 minutes. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwGponOntPerfCurr15MinFecCorrectByte | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Count of bytes that were corrected by the FEC function in the current 15 minutes. | ||||
| ChwGponOntPerfCurr15MinFecCorrectCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Count of code words that were corrected by the FEC function in the current 15 minutes. | ||||
| ChwGponOntPerfCurr15MinFecUncorrectCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Count of code words that were not corrected by the FEC function in the current 15 minutes. | ||||
| ChwGponOntPerfCurr15MinFecTotalCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Count of total received code words in the current 15 minutes. | ||||
| ChwGponOntPerfCurr15MinFecSeconds | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Count of seconds in the current 15 minutes, when there was a forward error correction anomaly. | ||||
| ChwGponOntPerfCurr15MinRangingTimeCount | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Count of rangingtime in the current 15 minutes. | ||||
| ChwGponOntPerfCurr15MinTransmittedGemFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Count of transmitted XGEM frames in the current 15 minutes. | ||||
| ChwGponOntPerfCurr15MinXgemKeyErrorCount | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Count of XGEM key errors in the current 15 minutes. | ||||
| ChwGponOntPerfCurr15MinXgemHecErrorCount | 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Count of XGEM hec error in the current 15 minutes. | ||||
| ThwGponOntPerfHis15MinTable | 1.3.6.1.4.1.2011.6.145.1.1.2.3 | NA | ||
table · not-accessible · current Ont performance monitor statistic table. This table is used to query ont statistic. The indexes of this table are ifIndex, hwXponOntIndex and hwGponOntPerfHis15MinNumber. | ||||
| RhwGponOntPerfHis15MinEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1 | NA | ||
row · not-accessible · current Ont performance monitor statistic table. This table is used to query ont statistic. The indexes of this entry are ifIndex,hwXponOntIndex and hwGponOntPerfHis15MinNumber. | ||||
| ChwGponOntPerfHis15MinNumber | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.1 | Unsigned32 (1) | NA | |
column · Unsigned32 (1) · not-accessible · current Performance data interval number 1 is the most recent previous 15 minutes interval. Rang:1. | ||||
| ChwGponOntPerfHis15MinFecCorrectByte | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Count of bytes that were corrected by the FEC function in this interval. | ||||
| ChwGponOntPerfHis15MinFecCorrectCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Count of code words that were corrected by the FEC function in this interval. -1 indicates the invalid value. | ||||
| ChwGponOntPerfHis15MinFecUncorrectCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Count of code words that were not corrected by the FEC function in this interval. -1 indicates the invalid value. | ||||
| ChwGponOntPerfHis15MinFecTotalCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Count of total received code words in this interval. -1 indicates the invalid value. | ||||
| ChwGponOntPerfHis15MinFecSeconds | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Count of seconds during this interval, when there was a forward error correction anomaly. | ||||
| ChwGponOntPerfHis15MinRangingTimeCount | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Count of rangingtime in this interval. | ||||
| ChwGponOntPerfHis15MinTransmittedGemFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Count of transmitted XGEM frames in this interval. | ||||
| ChwGponOntPerfHis15MinXgemKeyErrorCount | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Count of XGEM key errors in this interval. | ||||
| ChwGponOntPerfHis15MinXgemHecErrorCount | 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Count of XGEM hec error in this interval. | ||||
| ThwGponOntIphostStatsTable | 1.3.6.1.4.1.2011.6.145.1.1.2.4 | NA | ||
table · not-accessible · current The ONT IPHOST port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntObjIndex. | ||||
| RhwGponOntIphostStatsEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1 | NA | ||
row · not-accessible · current The ONT IPHOST port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntObjIndex. | ||||
| ChwGponOntIphostEthernetStatisticRecvOctets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received bytes. | ||||
| ChwGponOntIphostEthernetStatisticRecvPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvMulticastPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received multicast frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvBroadcastPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received broadcast frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvPkts64Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 64-octet frames | ||||
| ChwGponOntIphostEthernetStatisticRecvPkts65to127Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 65~127-octet frames | ||||
| ChwGponOntIphostEthernetStatisticRecvPkts128to255Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 128~255-octet frames | ||||
| ChwGponOntIphostEthernetStatisticRecvPkts256to511Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 256~511-octet frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvPkts512to1023Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 512~1023-octet frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvPkts1024to1518Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 1024~1518-octet frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvPktsOversize | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received oversize frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvPktsUndersize | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received undersize frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvFCSErrors | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received FCS error frames. | ||||
| ChwGponOntIphostEthernetStatisticRecvDropEvents | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received drop events. | ||||
| ChwGponOntIphostEthernetStatisticSendOctets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent bytes. | ||||
| ChwGponOntIphostEthernetStatisticSendPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent frames. | ||||
| ChwGponOntIphostEthernetStatisticMulticastSendPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent multicast frames. | ||||
| ChwGponOntIphostEthernetStatisticSendBroadcastPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent broadcast frames. | ||||
| ChwGponOntIphostEthernetStatisticSendPkts64Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 64-octet frames | ||||
| ChwGponOntIphostEthernetStatisticSendPkts65to127Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 65~127-octet frames | ||||
| ChwGponOntIphostEthernetStatisticSendPkts128to255Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 128~255-octet frames | ||||
| ChwGponOntIphostEthernetStatisticSendPkts256to511Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 256~511-octet frames. | ||||
| ChwGponOntIphostEthernetStatisticSendPkts512to1023Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 512~1023-octet frames. | ||||
| ChwGponOntIphostEthernetStatisticSendPkts1024to1518Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 1024~1518-octet frames. | ||||
| ChwGponOntIphostEthernetStatisticSendPktsOversize | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent oversize frames. | ||||
| ChwGponOntIphostEthernetStatisticForwardDropEvents | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent drop events. | ||||
| ChwGponOntIphostEthernetStatisticClear | 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.60 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwGponOntPerfEverbeforeDataTable | 1.3.6.1.4.1.2011.6.145.1.1.2.5 | NA | ||
table · not-accessible · current Ont performance monitor statistic table. This table is used to query ont ever before statistic. The indexes of this table are a combination of ifIndex and hwXponOntIndex. | ||||
| RhwGponOntPerfEverbeforeDataEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1 | NA | ||
row · not-accessible · current Ont performance monitor statistic table. This table is used to query ont ever before statistic. The indexes of this entry are a combination of ifIndex and hwXponOntIndex.
| ||||
| ChwGponOntEverbeforeDownFrameFecCorrectedBytes | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current Count of bytes that were corrected by the FEC function ever before | ||||
| ChwGponOntEverbeforeDownFrameFecCorrectedCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current Count of code words that were corrected by the FEC function ever before. | ||||
| ChwGponOntEverbeforeDownFrameFecUncorrectableCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current Count of code words that were not corrected by the FEC function ever before. | ||||
| ChwGponOntEverbeforeDownFrameTotalRecCodeWords | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Count of total received code words ever before. | ||||
| ChwGponOntEverbeforeDownFrameFecSeconds | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Count of seconds ever before, when there was a forward error correction anomaly. | ||||
| ChwGponOntEverbeforeRangingTimeCount | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Count of rangingtime ever before. | ||||
| ChwGponOntEverbeforeTransmittedGemFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Count of transmitted XGEM frames ever before. | ||||
| ChwGponOntEverbeforeXgemKeyErrorCount | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Count of XGEM key errors ever before. | ||||
| ChwGponOntEverbeforeXgemHecErrorCount | 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Count of XGEM hec error ever before. | ||||
| Thw10GponOltOpticsModuleInformationTable | 1.3.6.1.4.1.2011.6.145.1.1.2.6 | NA | ||
table · not-accessible · current This table is used to query the information about the optical transceiver. The index of this table is ifIndex. | ||||
| Rhw10GponOltOpticsModuleInformationEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1 | NA | ||
row · not-accessible · current This table is used to query the information about the optical transceiver. The index of this entry is ifIndex.
| ||||
| Chw10GponOltOpticsModuleInfoIdentifier | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the type of serial transceiver. Options: 1. unknown(0) - Unknown or unspecified 2. gbic(1) - GBIC 3. solderedToMotherBoard(2) - Module soldered to motherboard 4. sfp(3) - SFP 5. pin300XBI(4) - PIN300XBI 6. xenpak(5) - XENPAK 7. xfp(6) - XFP 8. xff(7) - XFF 9. xfep(8) - XFEP 10. xpak(9) - XPAK 11. x2(10) - X2 12. sfpplus(11) - SFP+ 13. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoExtCLEICode | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the extclei code. Options: 1. nonExtCLEICode(0) - No CLEI code present in Table 02h 2. extCLEICode(1) - CLEI code present in Table 02h 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoExtTXRefClock | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the txref clock. Options: 1. nonExtTXRefClock(0) - TX Ref Clock Input Not Required 2. extTXRefClock(1) - TX Ref Clock Input Required 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoExtCDRFunc | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the CDR function. Options: 1. nonExtCDRFunc(0) - Non-CDR version of XFP 2. extCDRFunc(1) - Module with CDR function 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoExtPowerLevel | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the power level. Options: 1. extPowerLevel1(0) - Power Level 1 Module (1.5 W max. power dissipation.) 2. extPowerLevel2(1) - Power Level 2 Module (2.5W Max) 3. extPowerLevel3(2) - Power Level 3 Module (3.5W max. power dissipation.) 4. extPowerLevel4(3) - Power Level 4 Module (>3.5W max. power dissipation.) 5. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoConnector | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. style1Connector(3) - Fibre Channel Style 1 copper connector 4. style2Connector(4) - Fibre Channel Style 2 copper connector 5. bnctnc(5) - BNC/TNC 6. channelCoaxial(6) - Fibre Channel coaxial headers 7. fiberJack(7) - FiberJack 8. lc(8) - LC 9. mtrj(9) - MT-RJ 10. mu(10) - MU 11. sg(11) - SG 12. opticalPigtail(12) - Optical pigtail 13. hssdc(13) - HSSDC II 14. copperPigtail(14) - Copper Pigtail 15. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoEncodingRZ | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the EncodingRZ. Options: 1. nonEncodingRZ(0) - Encoding Don't Support RZ 2. encodingRZ(1) - Encoding Support RZ 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoEncodingNRZ | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the EncodingNRZ. Options: 1. nonEncodingNRZ(0) - Encoding Don't Support NRZ 2. encodingNRZ(1) - Encoding Support NRZ 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoEncoding8B10B | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the Encoding8B10B. Options: 1. nonEncoding8B10B(0) - Encoding Don't Support 8B10B 2. encoding8B10B(1) - Encoding Support 8B10B 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoEncoding64B | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the Encoding64B. Options: 1. nonEncoding64B(0) - Encoding Don't Support 64B/66B 2. encoding64B(1) - Encoding Support 64B/66B 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoBrMin | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum bit rate, units of 100 MBits/s | ||||
| Chw10GponOltOpticsModuleInfoBrMax | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum bit rate, units of 100 MBits/s | ||||
| Chw10GponOltOpticsModuleInfoSupportLenSMF | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Link length supported for SMF fiber in km | ||||
| Chw10GponOltOpticsModuleInfoSupportLenE50um | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Link length supported for EBW 50/125 um fiber, units of 2 m | ||||
| Chw10GponOltOpticsModuleInfoSupportLen50um | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Link length supported for 50/125 um fiber, units of 1 m | ||||
| Chw10GponOltOpticsModuleInfoSupportLen62p5um | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Link length supported for 62.5/125 um fiber, units of 1 m | ||||
| Chw10GponOltOpticsModuleInfoSupportLenCopper | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current Link length supported for copper, units of 1m | ||||
| Chw10GponOltOpticsModuleInfoTransmitterSupport | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the transmitter support. Options: 1. nonTunable(0) - Transmitter Not Support Tunable 2. tunable(1) - Transmitter Support Tunable 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoDetector | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the transmitter support. Options: 1. pin(0) - PIN 2. apd(1) - APD 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoCooledTransmitterDevice | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the wavelength control. Options: 1. nonSupport(0) - Wavelength control NonSupport 2. support(1) - Wavelength control Support 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoWavelengthControl | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the cooled transmitter device. Options: 1. nonSupport(0) - Cooled transmitter device NonSupport 2. support(1) - Cooled transmitter device Support 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoTransmitterTechnologySupport | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the transmitter technology support. Options: 1. vCSEL850(0) - vCSEL850 2. vCSEL1310(1) - vCSEL1310 3. vCSEL1550(2) - vCSEL1550 4. fP1310(3) - fP1310 5. dFB1310(4) - dFB1310 6. dFB1550(5) - dFB1550 7. eML1310(6) - eML1310 8. eML1550(7) - eML1550 9. cOPPER(8) - cOPPER 10. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoVendorName | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.23 | OCTET STRING (SIZE (0..17)) | RO | |
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the SFP vendor name (ASCII). | ||||
| Chw10GponOltOpticsModuleInfoSupportXFIMode | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the XFI mode. Options: 1. nonSupportXFIMode(0) - Don't Support XFI Loopback Mode 2. supportXFIMode(1) - XFI Loopback Mode Supported 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoSupportLinesideMode | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the XFI mode. Options: 1. nonSupportLinesideMode(0) - Don't Support Lineside Loopback Mode 2. supportLinesideMode(1) - Lineside Loopback Mode Supported 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoMaxBitRateSupportedByCDR | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the max bit rate by CDR. Options: 1. cdrNosupport(0) - CDR not support 2. maxBitRateSupportedByCDR11p1(1) - CDR support for 11.1 Gb/s 3. maxBitRateSupportedByCDR10p7(3) - CDR support for 10.7 Gb/s 4. maxBitRateSupportedByCDR10p5(7) - CDR support for 10.5 Gb/s 5. maxBitRateSupportedByCDR10p3(15) - CDR support for 10.3 Gb/s 6. maxBitRateSupportedByCDR9p95(31) - CDR support for 9.95 Gb/s 7. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoVendorOUI | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Vendor OUI. | ||||
| Chw10GponOltOpticsModuleInfoVendorPN | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.28 | OCTET STRING (SIZE (0..17)) | RO | |
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the Vendor PN. | ||||
| Chw10GponOltOpticsModuleInfoVendorRev | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.29 | OCTET STRING (SIZE (0..17)) | RO | |
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the Vendor rev. | ||||
| Chw10GponOltOpticsModuleInfoF51 | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.30 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Wavelength. | ||||
| Chw10GponOltOpticsModuleInfoWaveTolerance | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.31 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Wavelength. | ||||
| Chw10GponOltOpticsModuleInfoMaxCaseTemperature | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.32 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Maximum Case Temperature in Degrees C. | ||||
| Chw10GponOltOpticsModuleInfoCcbase | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.33 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Cc_base. | ||||
| Chw10GponOltOpticsModuleInfoMaxDissipation | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.34 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Maximum Power Dissipation. | ||||
| Chw10GponOltOpticsModuleInfoMaxDissipationPowerDownMode | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.35 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Maximum Total Power Dissipation in Power Down Mode. | ||||
| Chw10GponOltOpticsModuleInfoMaximum5P0VSupply | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.36 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Maximum current required by +5V Supply. | ||||
| Chw10GponOltOpticsModuleInfoMaximum3P3VSupply | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.37 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Maximum current required by +3.3V Supply. | ||||
| Chw10GponOltOpticsModuleInfoMaximum1P8VSupply | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.38 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Maximum current required by +1.8V Supply. | ||||
| Chw10GponOltOpticsModuleInfoMaximum5P2VSupply | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.39 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Maximum current required by -5.2V Supply. | ||||
| Chw10GponOltOpticsModuleInfoVendorSN | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.40 | OCTET STRING (SIZE (0..17)) | RO | |
column · OCTET STRING (SIZE (0..17)) · read-only · current This object indicates the Vendor SN. | ||||
| Chw10GponOltOpticsModuleInfoDateCode | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.41 | OCTET STRING (SIZE (0..9)) | RO | |
column · OCTET STRING (SIZE (0..9)) · read-only · current This object indicates the Date code. | ||||
| Chw10GponOltOpticsModuleInfoDiagnoMonitorPowerMeasure | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.42 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the Received power measurement type. Options: 1. supportOMA(0) - OMA 2. supportAveragePower(1) - Average Power 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoDiagnoMonitorTypeFECBER | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.43 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the Module Respond to FEC BER. Options: 1. nonSupportBER(0) - No BER Support 2. supportBER(1) - BER Support 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoEnhancedOptions | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.44 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 -Module Supports Optional VPS 6 -Optional Soft TX_DISABLE implemented 5 -Optional Soft P_down implemented 4 -Supports VPS LV regulator mode 3 -Supports VPS bypassed regulator Mode 2 -Active FEC control functions implemented 1 -Wavelength tunability implemented 0 -Optional CMU Support Mode invalid(-1) -Indicates that the query fails or no information is detected | ||||
| Chw10GponOltOpticsModuleInfoAuxInputOne | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.45 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the optics Aux Input One. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. auxInputType3(2) - 1G Tx Bias Current 4. auxInputType4(3) - TEC Current (mA) 5. auxInputType5(4) - Laser Temperature 6. auxInputType6(5) - Laser Wavelength 7. auxInputType7(6) - +5V Supply Voltage 8. auxInputType8(7) - 1G Tx Power 9. auxInputType9(8) - +1.8V Supply Voltage 10. auxInputType10(9) - -5.2V Supply Voltage 11. auxInputType11(10) - +5V Supply Current 12. auxInputType14(13) - +3.3V Supply Current 13. auxInputType15(14) - +1.8V Supply Current 14. auxInputType16(15) - -5.2V Supply Current 15. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoAuxInputTwo | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.46 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the optics Aux Input One. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. auxInputType3(2) - 1G Tx Bias Current 4. auxInputType4(3) - TEC Current (mA) 5. auxInputType5(4) - Laser Temperature 6. auxInputType6(5) - Laser Wavelength 7. auxInputType7(6) - +5V Supply Voltage 8. auxInputType8(7) - 1G Tx Power 9. auxInputType9(8) - +1.8V Supply Voltage 10. auxInputType10(9) - -5.2V Supply Voltage 11. auxInputType11(10) - +5V Supply Current 12. auxInputType14(13) - +3.3V Supply Current 13. auxInputType15(14) - +1.8V Supply Current 14. auxInputType16(15) - -5.2V Supply Current 15. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoCCEXT | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.47 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the CC_EXT . | ||||
| Chw10GponOltOpticsModuleInfoWavelengthFor2d5G | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.48 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Wavelength for 2.5G. | ||||
| Chw10GponOltOpticsModuleInfoWavelengthFor1d25G | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.49 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Wavelength for 1.25G. | ||||
| Chw10GponOltOpticsModuleInfoVendorSpecific | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.50 | OCTET STRING (SIZE (0..33)) | RO | |
column · OCTET STRING (SIZE (0..33)) · read-only · current This object indicates the Vendor specific. | ||||
| Chw10GponOltOpticsModuleXponType | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.51 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the module type. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. xgpon(5) - XG-PON 6. wdmpon(6) - WDM PON 7. hybridpon(7) - Hybrid PON 8. gponOrEpon(8) - GPON/EPON 9. xgspon(9) - XGS-PON 10. gponandxgpon(10) - GPON+XG-PON 11. gponandxgspon(11) - GPON+XGS-PON 12. twdmpon(15) - TWDM-PON 13. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleXponSubType | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.52 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the sub module type. Options: 1. unknown(1) - Unknown 2. classbplus(101) - CLASS B+ 3. classcplus(102) - CLASS C+ 4. classb(103) - CLASS B 5. classcplusplus(104) - CLASS C++ 6. classcd(105) - CLASS D 7. px20(201) - PX20 8. px20plus(202) - PX20+ 9. px20plusplus(203) - PX20++ 10. pr30(301) - PR30 11.pr20(302) - PR20 12.prx30(303) - PRX30 13.prx20(304) - PRX20 14.prx40(305) - PRX40 15.pr40(306) - PR40 16.prx30e(307) - PRX30-E 17.prx40e(308) - PRX40-E 18.pr30plus(309) - PR30+ 19.n2a(405) - N2a 20.n2b(406) - N2b 21.n1(407) - N1 22.e1(408) - E1 23.e2a(409) - E2a 24.e2b(410) - E2b 25.d1(411) - D1 26.d2(412) - D2 27.n2(413) - N2 28.e2(414) - E2 29.classbPlusAndPx20Plus(501) - GPON CLASS B+/EPON PX20+ 30.classbAndPx20(502) - GPON CLASS B/EPON PX20 31.invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleXponUsedType | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.53 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5. catvtriplex(5) - CATV TriPlex 6. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleXponEncapsulationType | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.54 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF 2x10 4. sfp(4) - SFP 5. xfp(5) - XFP 6. lxfp(6) - LXFP 7. bosaonboard(7) - BOSA ON BOARD 8. sfpplus(8) - SFP+ 9. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleXponTemperatureLevel | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.55 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. commercial(2) - commercial 3. industry(3) - industry 4. expandTemperature(4) - expand temperature 5. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleXponOPMprecision | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.56 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the OPM precision. Options: 1. unknown(1) - Unknown 2. db3(2) - 3db 3. db1(3) - 1db 4. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoCcBaseState | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.57 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the CC_BASE match state. Options: 1. correct (1) - Correct 2. incorrect(2) - Incorrect 3. invalid (-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoCcExtState | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.58 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the CC_EXT match state. Options: 1. correct (1) - Correct 2. incorrect(2) - Incorrect 3. invalid (-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoWaveLength | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.59 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Wavelength, unit:0.01nm. | ||||
| Chw10GponOltOpticsModuleComboMode | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.60 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the ComboMode. Options: 1. wdm (1) - wavelength division 2. tdm(2) - time division 3. invalid (-1) - Indicates that the query fails or no information is detected
| ||||
| Chw10GponOltOpticsModuleInfoPartNum | 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.61 | OCTET STRING (SIZE (0..16)) | RO | |
column · OCTET STRING (SIZE (0..16)) · read-only · current Indicate the part number of a optical module provided by Huawei. | ||||
| ThwGponCommonOntStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.7 | NA | ||
table · not-accessible · current This table is used to query the information about the priority queue alarm. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwGponCommonOntStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.7.1 | NA | ||
row · not-accessible · current This table is used to query the information about the priority queue alarm. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntUpstreamPQDiscardedBytesAlarmCount | 1.3.6.1.4.1.2011.6.145.1.1.2.7.1.1 | OCTET STRING (SIZE (0..8192)) | RO | |
column · OCTET STRING (SIZE (0..8192)) · read-only · current This object indicates the number of the upstream priority queue alarm due to buffer overflow. One record uses 6 bytes : T-CONT index(1byte)+PQ number(1byte)+alarm number(4bytes). | ||||
| ChwXponOntDownstreamPQDiscardedBytesAlarmCount | 1.3.6.1.4.1.2011.6.145.1.1.2.7.1.2 | OCTET STRING (SIZE (0..1280)) | RO | |
column · OCTET STRING (SIZE (0..1280)) · read-only · current This object indicates the number of the downstream priority queue alarm due to buffer overflow. One record uses 8 bytes : port type(1byte)+port index(1byte)+reserve(1byte)+PQ number(1byte)+alarm number(4byte). | ||||
| ChwXponOntPQDiscardedBytesAlarmCountClear | 1.3.6.1.4.1.2011.6.145.1.1.2.7.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwXponOntStatProbeConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.2.8 | NA | ||
table · not-accessible · current This table is used to configure statistical probe. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntStatProbeConfigIndex. | ||||
| RhwXponOntStatProbeConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.8.1 | NA | ||
row · not-accessible · current This table is used to configure statistical probe. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntStatProbeConfigIndex. | ||||
| ChwXponOntStatProbeConfigIndex | 1.3.6.1.4.1.2011.6.145.1.1.2.8.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Index of the statistical probe. Range: 1-2147483647, and -1. Value -1 must be issued when this index is configured. Then, the device allocates actual index to the NMS. | ||||
| ChwXponOntStatProbeConfigType | 1.3.6.1.4.1.2011.6.145.1.1.2.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object Indicates the type of statistic probe. Options: 1. vlanBased(1) - Indicates that the statistics are collected by ONT port, VLAN and VLAN priority. 2. gemPortBased(2) - Indicates that the statistics are collected by GEM port. 3. multicastGemPortBased(3) - Indicates that the statistics are collected by Multicast GEM port. 4. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntStatProbeConfigParameter | 1.3.6.1.4.1.2011.6.145.1.1.2.8.1.3 | OCTET STRING (SIZE (0..128)) | RW | |
column · OCTET STRING (SIZE (0..128)) · read-write · current This node indicates the detailed configurations of the statistical probe. If the type of the probe is vlanBased, the format of this node is 'AABBCCCCDD'. AA: Indicates the hexadecimal value of the ONT port type, VDSL(37),ETH(47) and IPHOST(50) is valid. BB: Indicates the hexadecimal value of an ONT port. CCCC: Indicates the hexadecimal value of a VLAN. DD: Indicates the hexadecimal value of the VLAN priority. 'FF' identifies all VLAN priorities, indicating that the VLAN priority is not configured. If the type of the probe is gemPortBased, the format of this node is 'AAAA'. AAAA: Indicates the hexadecimal value of GEM port ID for distributing-mode or GEM index for profile-mode. If the type of the probe is multicastGemPortBased, the content of this node is null string, doesn't need this parameter. For example, to configure probe with ONT ETH port 1, VLAN 1000, all VLAN priorities, issue '2F0103E8FF'. | ||||
| ChwXponOntStatProbeConfigRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.2.8.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current this object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntProbeStatTable | 1.3.6.1.4.1.2011.6.145.1.1.2.9 | NA | ||
table · not-accessible · current This table is used to query probe statistics. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntStatProbeConfigIndex. | ||||
| RhwXponOntProbeStatEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.9.1 | NA | ||
row · not-accessible · current This table is used to query probe statistics. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntStatProbeConfigIndex. | ||||
| ChwXponOntProbeStatResult | 1.3.6.1.4.1.2011.6.145.1.1.2.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This node identifies the result of queried probe statistics. Value 0 indicates that probe statistics are queried successfully. | ||||
| ChwXponOntProbeStatRecvBytes | 1.3.6.1.4.1.2011.6.145.1.1.2.9.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received bytes. | ||||
| ChwXponOntProbeStatRecvFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.9.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received frames. | ||||
| ChwXponOntProbeStatSendBytes | 1.3.6.1.4.1.2011.6.145.1.1.2.9.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent bytes. | ||||
| ChwXponOntProbeStatSendFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.9.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent frames. | ||||
| ChwXponOntProbeStatClear | 1.3.6.1.4.1.2011.6.145.1.1.2.9.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This node is used to clear probe statistics. Options: 1. clear(1) - Indicates that clear probe statistics. 2. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ThwGponOntMulticastGemPortStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.10 | NA | ||
table · not-accessible · current The ONT Multicast GEM Port statistics table. The index of this table is a combination of ifIndex and hwXponOntIndex. | ||||
| RhwGponOntMulticastGemPortStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1 | NA | ||
row · not-accessible · current The ONT Multicast GEM Port statistics table. The index of this entry is a combination of ifIndex and hwXponOntIndex.
| ||||
| ChwGponOntMulticastGemPortStatisticRecvLostFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the loss of frames. | ||||
| ChwGponOntMulticastGemPortStatisticRecvMisinsertedFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the misinserted frames. | ||||
| ChwGponOntMulticastGemPortStatisticRecvFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received frames. | ||||
| ChwGponOntMulticastGemPortStatisticRecvBlocks | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received blocks. | ||||
| ChwGponOntMulticastGemPortStatisticSendBlocks | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent blocks. | ||||
| ChwGponOntMulticastGemPortStatisticImpairedBlocks | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of received impaired data blocks. | ||||
| ChwGponOntMulticastGemPortStatisticSendGemFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of transmitted GEM frames. | ||||
| ChwGponOntMulticastGemPortStatisticClear | 1.3.6.1.4.1.2011.6.145.1.1.2.10.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwGponOntTdmPortPerf15MinTable | 1.3.6.1.4.1.2011.6.145.1.1.2.11 | NA | ||
table · not-accessible · current This table is used to query ONT TDM port statistics in history 15 minutes. The indexes of this table are ifIndex, hwXponOntIndex, hwGponDeviceOntPhyIndex and hwGponOntTdmPortPerf15minIntervalNum. | ||||
| RhwGponOntTdmPortPerf15MinEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.11.1 | NA | ||
row · not-accessible · current This table is used to query ONT TDM port statistics in history 15 minutes. The indexes of this entry are ifIndex, hwXponOntIndex, hwGponDeviceOntPhyIndex and hwGponOntTdmPortPerf15minIntervalNum. | ||||
| ChwGponOntTdmPortPerf15minIntervalNum | 1.3.6.1.4.1.2011.6.145.1.1.2.11.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the history 15 minutes interval number. value 0 indicates current 15 minutes interval. | ||||
| ChwGponOntTdmPortPerf15minES | 1.3.6.1.4.1.2011.6.145.1.1.2.11.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the statistic of the errored seconds. -1 indicates the invalid value. | ||||
| ChwGponOntTdmPortPerf15minSES | 1.3.6.1.4.1.2011.6.145.1.1.2.11.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the statistic of the serverly erroeds. -1 indicates the invalid value. | ||||
| ChwGponOntTdmPortPerf15minUAS | 1.3.6.1.4.1.2011.6.145.1.1.2.11.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the statistic of the unavailable seconds. -1 indicates the invalid value. | ||||
| ChwGponOntTdmPortPerf15minEFS | 1.3.6.1.4.1.2011.6.145.1.1.2.11.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the statistic of the error free seconds. -1 indicates the invalid value. | ||||
| ThwGponDevicePotsPortHis15MinStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.12 | NA | ||
table · not-accessible · current VOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPhyIndex. | ||||
| RhwGponDevicePotsPortHis15MinStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1 | NA | ||
row · not-accessible · current VOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPhyIndex. | ||||
| ChwGponDevicePotsPortHis15MinNumber | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current Statistic data interval number 1 is the most recent previous 15 minutes interval. Rang:1. | ||||
| ChwGponDevicePotsHis15MinStatisticRtpError | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of RTP packet errors. | ||||
| ChwGponDevicePotsHis15MinStatisticPacketLoss | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of the fraction of packets lost. | ||||
| ChwGponDevicePotsPortHis15MinMaxJitter | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum jitter identified during the measured interval. | ||||
| ChwGponDevicePotsPortHis15MinMaxTimeRTCP | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum time between RTCP packets. | ||||
| ChwGponDevicePotsHis15MinStatisticUnderFlowBuff | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of times the reassembly buffer underflows. | ||||
| ChwGponDevicePotsHis15MinStatisticOverFlowBuff | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of times the reassembly buffer overflows. | ||||
| ChwGponDevicePotsHis15MinStatisticCallSetupFails | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of call setup failures. | ||||
| ChwGponDevicePotsPortHis15MinCallSetupTimer | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current The longest duration of a single call setup detected during this interval. | ||||
| ChwGponDevicePotsHis15MinStatisticCallTerminateFails | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of calls that were terminated with cause. | ||||
| ChwGponDevicePotsHis15MinStatisticAnalogPortRelease | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current The statistic of analog port releases without dialling detected. | ||||
| ChwGponDevicePotsPortHis15MinAnalogPortOffHookTimer | 1.3.6.1.4.1.2011.6.145.1.1.2.12.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current The longest period of a single off-hook detected on the analog port. | ||||
| ThwXponOntPortEthernetStatsTable | 1.3.6.1.4.1.2011.6.145.1.1.2.13 | NA | ||
table · not-accessible · current The ONT port statistics table. The indexes of this table are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPort. | ||||
| RhwXponOntPortEthernetStatsEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1 | NA | ||
row · not-accessible · current The ONT port statistics table. The indexes of this entry are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPort. | ||||
| ChwXponOntPortEthernetStatisticRecvOctets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received bytes. | ||||
| ChwXponOntPortEthernetStatisticRecvPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received frames. | ||||
| ChwXponOntPortEthernetStatisticRecvBroadcastPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received broadcast frames. | ||||
| ChwXponOntPortEthernetStatisticRecvMulticastPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received multicast frames. | ||||
| ChwXponOntPortEthernetStatisticRecvPkts64Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 64-octet frames | ||||
| ChwXponOntPortEthernetStatisticRecvPkts65to127Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 65~127-octet frames | ||||
| ChwXponOntPortEthernetStatisticRecvPkts128to255Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 128~255-octet frames | ||||
| ChwXponOntPortEthernetStatisticRecvPkts256to511Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 256~511-octet frames. | ||||
| ChwXponOntPortEthernetStatisticRecvPkts512to1023Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 512~1023-octet frames. | ||||
| ChwXponOntPortEthernetStatisticRecvPkts1024to1518Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 1024~1518-octet frames. | ||||
| ChwXponOntPortEthernetStatisticRecvPktsOversize | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received oversize frames. | ||||
| ChwXponOntPortEthernetStatisticRecvPktsUndersize | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received undersize frames. | ||||
| ChwXponOntPortEthernetStatisticRecvFCSErrors | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received FCS error frames. | ||||
| ChwXponOntPortEthernetStatisticRecvDropEvents | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received drop events. | ||||
| ChwXponOntPortEthernetStatisticSendOctets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the send drop bytes. | ||||
| ChwXponOntPortEthernetStatisticSendPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the send frames. | ||||
| ChwXponOntPortEthernetStatisticSendBroadcastPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent broadcast frames. | ||||
| ChwXponOntPortEthernetStatisticSendMulticastPkts | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent multicast frames. | ||||
| ChwXponOntPortEthernetStatisticSendPkts64Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 64-octet frames. | ||||
| ChwXponOntPortEthernetStatisticSendPkts65to127Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 65~127-octet frames. | ||||
| ChwXponOntPortEthernetStatisticSendPkts128to255Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 128~255-octet frames. | ||||
| ChwXponOntPortEthernetStatisticSendPkts256to511Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 256~511-octet frames. | ||||
| ChwXponOntPortEthernetStatisticSendPkts512to1023Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 512~1023-octet frames. | ||||
| ChwXponOntPortEthernetStatisticSendPkts1024to1518Octets | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 1024~1518-octet frames. | ||||
| ChwXponOntPortEthernetStatisticSendPktsOversize | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent oversize frames. | ||||
| ChwXponOntPortEthernetStatisticForwardDropEvents | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent drop events. | ||||
| ChwXponOntPortEthernetStatisticClear | 1.3.6.1.4.1.2011.6.145.1.1.2.13.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwXponOntPowerReductionStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.14 | NA | ||
table · not-accessible · current This table is used to query the information about the ONT power reduction statistics. It is only used for defining GPON management common MIB objects for both profile-mode and distributing-mode. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntPowerReductionStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.14.1 | NA | ||
row · not-accessible · current This table is used to query the information about the ONT power reduction statistics. It is only used for defining GPON management common MIB objects for both profile-mode and distributing-mode. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntPowerReductionDozeTime | 1.3.6.1.4.1.2011.6.145.1.1.2.14.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the total doze time of power reduction ONT since its statistics have been cleared last time. It is defined as an 64-bit integer whose unit is 'S'(Second). | ||||
| ChwXponOntPowerReductionCyclicSleepTime | 1.3.6.1.4.1.2011.6.145.1.1.2.14.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the total cyclic sleep time of power reduction ONT since its statistics have been cleared last time. It is defined as an 64-bit integer whose unit is 'S'(Second). | ||||
| ChwXponOntPowerReductionWatchfulSleepTime | 1.3.6.1.4.1.2011.6.145.1.1.2.14.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the total watchful sleep time of power reduction ONT since its statistics have been cleared last time. It is defined as an 64-bit integer whose unit is 'S'(Second). | ||||
| ChwXponOntPowerReductionEnergySaved | 1.3.6.1.4.1.2011.6.145.1.1.2.14.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the total energy saved for power reduction ONT since its statistics have been cleared last time. It is defined as an 64-bit integer whose unit is 'J'(standard energy unit). | ||||
| ChwXponOntPowerReductionCountClear | 1.3.6.1.4.1.2011.6.145.1.1.2.14.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the power reduction statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ThwGponPortTrafficStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.15 | NA | ||
table · not-accessible · current This table is used to query the information about the traffic congestion statistics. The indexes of this table are ifIndex and hwGponPortTrafficStatisticIndex. | ||||
| RhwGponPortTrafficStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.15.1 | NA | ||
row · not-accessible · current This table is used to query the information about the traffic congestion statistics. The indexes of this entry are ifIndex and hwGponPortTrafficStatisticIndex. | ||||
| ChwGponPortTrafficStatisticIndex | 1.3.6.1.4.1.2011.6.145.1.1.2.15.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Index of the traffic congestion statistics. Range: 0-1. Value 0 query current period traffic congestion statistics Value 1 query last period traffic congestion statistics. | ||||
| ChwGponPortTrafficStatisticUpstreamRate | 1.3.6.1.4.1.2011.6.145.1.1.2.15.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the received average rate of this port. It is defined as an 32-bit integer whose unit is 'kbps'. | ||||
| ChwGponPortTrafficStatisticDownstreamRate | 1.3.6.1.4.1.2011.6.145.1.1.2.15.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the transmitted average rate of this port. It is defined as an 32-bit integer whose unit is 'kbps'. | ||||
| ChwGponPortTrafficStatisticUpstreamCongestionTimes | 1.3.6.1.4.1.2011.6.145.1.1.2.15.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Upstream congestion period number. | ||||
| ChwGponPortTrafficStatisticDownstreamCongestionTimes | 1.3.6.1.4.1.2011.6.145.1.1.2.15.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Downstream congestion period number. | ||||
| ThwGponComboOltEthernetStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.16 | NA | ||
table · not-accessible · current This table is the Combo PON port ether statistics table. The indexes of this table are ifIndex and hwGponComboOltEthernetStatisticChannelID. | ||||
| RhwGponComboOltEthernetStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1 | NA | ||
row · not-accessible · current This table is the Combo PON port ether statistics table. The indexes of this entry are ifIndex and hwGponComboOltEthernetStatisticChannelID. | ||||
| ChwGponComboOltEthernetStatisticChannelID | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the channel of the Combo PON port. Options: 1. gpon(1) - Indicates that the channel of the Combo PON port is GPON. 2. xgpon(2) - Indicates that the channel of the Combo PON port is XG-PON.
| ||||
| ChwGponComboOltEthernetStatisticReceivedPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received frames. | ||||
| ChwGponComboOltEthernetStatisticSendPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent frames. | ||||
| ChwGponComboOltEthernetStatisticDropPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of Ethernet frames, including oversized frames, undersized frames, and CRC failures. | ||||
| ChwGponComboOltEthernetStatisticReceivedTotalPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received GEM frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedBroadcastPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received broadcast frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedMulticastPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received multicast frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedUnicastPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received unicast frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedLen64Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 64-octet frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedLen65To127Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 65~127-octet frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedLen128To255Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 128~255-octet frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedLen256To511Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 256~511-octet frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedLen512To1023Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 512~1023-octet frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedLen1024To1518Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received 1024~1518-octet frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedLenMore1518Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received over 1518-octet frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedBytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received octets. | ||||
| ChwGponComboOltEthernetStatisticReceivedTooLongPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received oversize frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedTooShortPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received undersize frames. | ||||
| ChwGponComboOltEthernetStatisticReceivedCRCErrPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received error frames. | ||||
| ChwGponComboOltEthernetStatisticSendTotalPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the send GEM frames. | ||||
| ChwGponComboOltEthernetStatisticSendBroadcastPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the send broadcast frames. | ||||
| ChwGponComboOltEthernetStatisticSendMulticastPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the send multicast frames. | ||||
| ChwGponComboOltEthernetStatisticSendUnicastPakts | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the send unicast frames. | ||||
| ChwGponComboOltEthernetStatisticSendLen64Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 64-octet frames. | ||||
| ChwGponComboOltEthernetStatisticSendLen65To127Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 65~127-octet frames. | ||||
| ChwGponComboOltEthernetStatisticSendLen128To255Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 128~255-octet frames. | ||||
| ChwGponComboOltEthernetStatisticSendLen256To511Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 256~511-octet frames. | ||||
| ChwGponComboOltEthernetStatisticSendLen512To1023Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.28 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 512~1023-octet frames. | ||||
| ChwGponComboOltEthernetStatisticSendLen1024To1518Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.29 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent 1024~1518-octet frames. | ||||
| ChwGponComboOltEthernetStatisticSendLenMore1518Bytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.30 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent over 1518-octet frames. | ||||
| ChwGponComboOltEthernetStatisticSendBytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent octets. | ||||
| ChwGponComboOltEthernetStatisticSendMulticastBytes | 1.3.6.1.4.1.2011.6.145.1.1.2.16.1.32 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent multicast bytes. | ||||
| ThwGponComboOltGemStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.17 | NA | ||
table · not-accessible · current This table is the Combo PON port GEM frame statistics table. The indexes of this table are ifIndex and hwGponComboOltGemStatisticChannelID. | ||||
| RhwGponComboOltGemStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1 | NA | ||
row · not-accessible · current This table is the Combo PON port GEM frame statistics table. The indexes of this entry are ifIndex and hwGponComboOltGemStatisticChannelID. | ||||
| ChwGponComboOltGemStatisticChannelID | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the channel of the Combo PON port. Options: 1. gpon(1) - Indicates that the channel of the Combo PON port is GPON. 2. xgpon(2) - Indicates that the channel of the Combo PON port is XG-PON.
| ||||
| ChwGponComboOltGemStatisticReceivedFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the received GEM frames. | ||||
| ChwGponComboOltGemStatisticReceivedOMCIPackts | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the recived OMCI frames. | ||||
| ChwGponComboOltGemStatisticReceivedPLOAMPackts | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the recived PLOAM frames. | ||||
| ChwGponComboOltGemStatisticReceivedIdlePackts | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the recived IDLE frames. | ||||
| ChwGponComboOltGemStatisticSendFrames | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent GEM frames. | ||||
| ChwGponComboOltGemStatisticSendOMCIPackts | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent OMCI frames. | ||||
| ChwGponComboOltGemStatisticSendPLOAMPackts | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent PLOAM frames. | ||||
| ChwGponComboOltGemStatisticSendIdlePackts | 1.3.6.1.4.1.2011.6.145.1.1.2.17.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the sent IDLE frames. | ||||
| ThwOltGponComboPortInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.2.18 | NA | ||
table · not-accessible · current The Combo PON port information table. The index of this table is ifIndex and hwOltGponComboPortChannelID. | ||||
| RhwOltGponComboPortInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.18.1 | NA | ||
row · not-accessible · current The Combo PON port information table. The index of this entry is ifIndex and hwOltGponComboPortChannelID. | ||||
| ChwOltGponComboPortChannelID | 1.3.6.1.4.1.2011.6.145.1.1.2.18.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the channel of the Combo PON port. Options: 1. gpon(1) - Indicates that the channel of the Combo PON port is GPON. 2. xgpon(2) - Indicates that the channel of the Combo PON port is XG-PON.
| ||||
| ChwOltGponComboPortOpticModuleStatus | 1.3.6.1.4.1.2011.6.145.1.1.2.18.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the status of the Combo PON port optical module. Options: 1. online(1) - Indicates that the status of the Combo PON port optical module is online. 2. offline(2) - Indicates that the status of the Combo PON port optical module is offline. 3. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ThwXponOntRegAndAuthStatTable | 1.3.6.1.4.1.2011.6.145.1.1.2.19 | NA | ||
table · not-accessible · current This table is indicates the ONT registration and authentication statistics. The indexes of this table are ifIndex and hwXponOntIndex. | ||||
| RhwXponOntRegAndAuthStatEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.19.1 | NA | ||
row · not-accessible · current This table is indicates the ONT registration and authentication statistics. The indexes of this entry are ifIndex and hwXponOntIndex.
| ||||
| ChwXponOntRegAndAuthStatRegisterAcceptedCounter | 1.3.6.1.4.1.2011.6.145.1.1.2.19.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the registration accepted counter. -1 indicates the invalid value. | ||||
| ChwXponOntRegAndAuthStatRegisterRejectedCounter | 1.3.6.1.4.1.2011.6.145.1.1.2.19.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the registration rejected counter. -1 indicates the invalid value. | ||||
| ChwXponOntRegAndAuthStatAuthAcceptedCounter | 1.3.6.1.4.1.2011.6.145.1.1.2.19.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the authentification accepted counter. -1 indicates the invalid value. | ||||
| ChwXponOntRegAndAuthStatAuthRejectedCounter | 1.3.6.1.4.1.2011.6.145.1.1.2.19.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the authentification rejected counter. -1 indicates the invalid value. | ||||
| ChwXponOntRegAndAuthStatChallengedCounter | 1.3.6.1.4.1.2011.6.145.1.1.2.19.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the authentification challenged counter. -1 indicates the invalid value. | ||||
| ThwXponPortTrafficStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.20 | NA | ||
table · not-accessible · current This table is used to query statistics about upstream and downstream rates of a PON port. The index of this table is ifIndex. | ||||
| RhwXponPortTrafficStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1 | NA | ||
row · not-accessible · current This table is used to query statistics about upstream and downstream rates of a PON port. The index of this entry is ifIndex.
| ||||
| ChwXponPortTrafficStatisticCurrentUpstreamRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx rate of a port, in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticCurrentDownstreamRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx rate of a port, in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp1GChannelRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx rate of 1G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp1GChannelBandwidthUsage | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current upstream bandwidth usage of 1G channel in the unit of 1%. | ||||
| ChwXponPortTrafficStatisticUp1GChannelUnicastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx unicast rate of 1G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp1GChannelMulticastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx multicast rate of 1G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp1GChannelBroadcastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx boardcast rate of 1G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp10GChannelRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx rate of 10G(or 2.5G in xgpon) channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp10GChannelBandwidthUsage | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current upstream bandwidth usage of 10G(or 2.5G in xgpon) channel in the unit of 1%. | ||||
| ChwXponPortTrafficStatisticUp10GChannelUnicastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx unicast rate of 10G(or 2.5G in xgpon) channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp10GChannelMulticastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx multicast rate of 10G(or 2.5G in xgpon) channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp10GChannelBroadcastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx boardcast rate of 10G(or 2.5G in xgpon) channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticDown1GChannelRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx rate of 1G(or 2.5G in gpon) channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticDown1GChannelBandwidthUsage | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current downstream bandwidth usage of 1G(or 2.5G in gpon) channel in the unit of 1%. | ||||
| ChwXponPortTrafficStatisticDown1GChannelUnicastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx unicast rate of 1G(or 2.5G in gpon) channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticDown1GChannelMulticastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx multicast rate of 1G(or 2.5G in gpon) channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticDown1GChannelBroadcastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx boardcast rate of 1G(or 2.5G in gpon) channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticDown10GChannelRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx rate of 10G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticDown10GChannelBandwidthUsage | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current downstream bandwidth usage of 10G(or 2.5G in xgpon) channel in the unit of 1%. | ||||
| ChwXponPortTrafficStatisticDown10GChannelUnicastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx unicast rate of 10G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticDown10GChannelMulticastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx multicast rate of 10G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticDown10GChannelBroadcastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Tx boardcast rate of 10G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp2GChannelRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx rate of 1G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp2GChannelBandwidthUsage | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current upstream bandwidth usage of 1G channel in the unit of 1%.. | ||||
| ChwXponPortTrafficStatisticUp2GChannelUnicastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx unicast rate of 1G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp2GChannelMulticastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx multicast rate of 1G channel in the unit of kbit/s. | ||||
| ChwXponPortTrafficStatisticUp2GChannelBroadcastRate | 1.3.6.1.4.1.2011.6.145.1.1.2.20.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current Rx boardcast rate of 1G channel in the unit of kbit/s. | ||||
| ThwXponOntQueueStatisticTable | 1.3.6.1.4.1.2011.6.145.1.1.2.21 | NA | ||
table · not-accessible · current This table is used to query statistics about priority queue of ONT. The index of this table is ifIndex, hwXponOntIndex, hwXponOntQueueStatisticType, hwXponOntQueueStatisticIndex and hwXponOntQueueStatisticQueueId. | ||||
| RhwXponOntQueueStatisticEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.21.1 | NA | ||
row · not-accessible · current This table is used to query statistics about priority queue of ONT. The index of this table is ifIndex, hwXponOntIndex, hwXponOntQueueStatisticType, hwXponOntQueueStatisticIndex and hwXponOntQueueStatisticQueueId. | ||||
| ChwXponOntQueueStatisticType | 1.3.6.1.4.1.2011.6.145.1.1.2.21.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the type of statistics object. Options: 1. tcont(1) - Indicates that the statistics object is the T-CONT of GPON ONT 2. llid(2) - Indicates that the statistics object is the LLID of EPON ONT 3. eth(3) - Indicates that the statistics object is the ETH port of ONT 4. wifi(4) - Indicates that the statistics object is the WIFI port of ONT
| ||||
| ChwXponOntQueueStatisticIndex | 1.3.6.1.4.1.2011.6.145.1.1.2.21.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the index of statistics object. 1. When hwXponOntQueueStatisticIfType is tcont(1), the value is the T-CONT ID 2. When hwXponOntQueueStatisticIfType is llid(2), the value must be -1 3. When hwXponOntQueueStatisticIfType is eth(3), the value is the ETH port ID 4. When hwXponOntQueueStatisticIfType is wifi(4), this object Indicates the WIFI frequency band, 1 indicates 2.4G, 2 indicates 5G | ||||
| ChwXponOntQueueStatisticQueueId | 1.3.6.1.4.1.2011.6.145.1.1.2.21.1.3 | Integer32 (0..7) | NA | |
column · Integer32 (0..7) · not-accessible · current Indicates a specified queue ID. Range: 0-7 The queues are real queues (errors are prompted when there are actually four queues on a ONT). | ||||
| ChwXponOntQueueStatisticPassedNumber | 1.3.6.1.4.1.2011.6.145.1.1.2.21.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of pass-through packets. After a packet is sent, the statistics of pass-through packets are increased by 1 if the packet passes. | ||||
| ChwXponOntQueueStatisticDroppedNumber | 1.3.6.1.4.1.2011.6.145.1.1.2.21.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of dropped packets. After a packet is sent, the statistics of dropped packets are increased by 1 if the packet fails to pass. | ||||
| ChwXponOntQueueStatisticPassedBytes | 1.3.6.1.4.1.2011.6.145.1.1.2.21.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of pass-through bytes. After a byte is sent, the statistics of pass-through bytes are increased by 1 if the byte passes. | ||||
| ThwXponOntQueueStatisticControlTable | 1.3.6.1.4.1.2011.6.145.1.1.2.22 | NA | ||
table · not-accessible · current This table is used to clear statistics about priority queue of ONT. The index of this table is ifIndex, hwXponOntIndex, hwXponOntQueueStatisticControlType and hwXponOntQueueStatisticControlIndex. | ||||
| RhwXponOntQueueStatisticControlEntry | 1.3.6.1.4.1.2011.6.145.1.1.2.22.1 | NA | ||
row · not-accessible · current This table is used to clear statistics about priority queue of ONT. The index of this table is ifIndex, hwXponOntIndex, hwXponOntQueueStatisticControlType and hwXponOntQueueStatisticControlIndex. | ||||
| ChwXponOntQueueStatisticControlType | 1.3.6.1.4.1.2011.6.145.1.1.2.22.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the type of statistics object. Options: 1. tcont(1) - Indicates that the statistics object is the T-CONT of GPON ONT 2. llid(2) - Indicates that the statistics object is the LLID of EPON ONT 3. eth(3) - Indicates that the statistics object is the ETH port of ONT 4. wifi(4) - Indicates that the statistics object is the WIFI port of ONT
| ||||
| ChwXponOntQueueStatisticControlIndex | 1.3.6.1.4.1.2011.6.145.1.1.2.22.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the index of statistics object. 1. When hwXponOntQueueStatisticIfType is tcont(1), the value is the T-CONT ID 2. When hwXponOntQueueStatisticIfType is llid(2), the value must be -1 3. When hwXponOntQueueStatisticIfType is eth(3), the value is the ETH port ID 4. When hwXponOntQueueStatisticIfType is wifi(4), the value must be -1 | ||||
| ChwXponOntQueueStatisticControlClear | 1.3.6.1.4.1.2011.6.145.1.1.2.22.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates a specified queue ID. 1. clear(1) - In the set operation, clear the statistics information 2. invalid(-1) - In the get operation, the invalid value -1 is returned.
| ||||
| NhwGponDeviceCommonGlobalObjects | 1.3.6.1.4.1.2011.6.145.1.1.3 | |||
| ShwGponDeviceChangePasswordIntervalTime | 1.3.6.1.4.1.2011.6.145.1.1.3.1 | Gauge32 (0 | 5..1440 | 65535) | RW | |
scalar · Gauge32 (0 | 5..1440 | 65535) · read-write · current The interval time of ONT's password renew, 0 means no update, 65535 means no configration data. Unit: minutes
| ||||
| ShwGponDeviceTcontAutoCombineSwitch | 1.3.6.1.4.1.2011.6.145.1.1.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch value of T-CONT auto-combine. Options: 1. enable(1) - The switch value of T-CONT auto-combine is enable 2. disable(2) - The switch value of T-CONT auto-combine is disable
| ||||
| ShwGponOntInteroperabilityMode | 1.3.6.1.4.1.2011.6.145.1.1.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch mode of gpon ont interoperability. Options: 1. ituT(1) - The switch mode of gpon ont interoperability is ituT 2. ctc(2) - The switch mode of gpon ont interoperability is ctc 3. ericV1(3) - The switch mode of gpon ont interoperability is ericV1 4. ericV2(4) - The switch mode of gpon ont interoperability is ericV2 5. ituTG984(5) - The switch mode of gpon ont interoperability is ituTG984 6. ituTG988(6) - The switch mode of gpon ont interoperability is ituTG988 7. cuc(7) - The switch mode of gpon ont interoperability is cuc 8. cmcc(8) - The switch mode of gpon ont interoperability is cmcc 9. eci(9) - The switch mode of gpon ont interoperability is eci 10.mode1(10) - The switch mode of gpon ont interoperability is mode1 11.mode2(11) - The switch mode of gpon ont interoperability is mode2 12.mode2V2(12) - The switch mode of gpon ont interoperability is mode2V2 13.mode3(13) - The switch mode of gpon ont interoperability is mode3 14.mode4(14) - The switch mode of gpon ont interoperability is mode4 15.mode2V3(15) - The switch mode of gpon ont interoperability is mode2V3 16.mode2V4(16) - The switch mode of gpon ont interoperability is mode2V4 17.mode5(17) - The switch mode of gpon ont interoperability is mode5 18.eciV2(18) - The switch mode of gpon ont interoperability is eciV2 19.mode1V2(19) - The switch mode of gpon ont interoperability is mode1V2
| ||||
| ShwGponDeviceOntDefaultLineProfName | 1.3.6.1.4.1.2011.6.145.1.1.3.4 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the name of the default line profile that is bound to the ONT. | ||||
| ShwGponDeviceOntDefaultSrvProfName | 1.3.6.1.4.1.2011.6.145.1.1.3.5 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current This object indicates the name of the default service profile that is bound to the ONT. | ||||
| ShwGponOntMutlicastAuthMode | 1.3.6.1.4.1.2011.6.145.1.1.3.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The mode of gpon ont multicast authentication. Options: 1. ontControl(1) - The mode of gpon multicast authentication is ont-control 2. oltControl(2) - The mode of gpon multicast authentication is olt-control
| ||||
| ShwGponOnuTcontPriorityQueuePriorityReverse | 1.3.6.1.4.1.2011.6.145.1.1.3.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The priority reverse switch of gpon ont priority queue. Options: 1. enable(1) - The priority reverse switch is enable 2. disable(2) - The priority reverse switch is disable
| ||||
| ShwGponOntInteroperModeActiveMode | 1.3.6.1.4.1.2011.6.145.1.1.3.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The active mode of gpon ONT interoperability mode. Options: 1. immediate(1) - Indicates that the ONT takes effect immediately 2. nextStartup(2) - Indicates that the ONT takes effect after next startup 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ShwGponDeviceTcontAutoCreateSwitch | 1.3.6.1.4.1.2011.6.145.1.1.3.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch value of T-CONT auto-create. Options: 1. enable(1) - The switch value of T-CONT auto-create is enable 2. disable(2) - The switch value of T-CONT auto-create is disable The default value is disable(2)
| ||||
| ShwGponOntPriorityQueueMappingPolicySwitch | 1.3.6.1.4.1.2011.6.145.1.1.3.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch value of GPON ONT priority queue mapping policy. Options: 1. gemMap(1) - GPON ONT priority queue mapping policy is gemMap 2. cosMap(2) - GPON ONT priority queue mapping policy is cosMap The default value is gemMap(1)
| ||||
| ShwGponDeviceXgMulticastGemportId | 1.3.6.1.4.1.2011.6.145.1.1.3.11 | Integer32 | RW | |
scalar · Integer32 · read-write · current The GEM port ID for XG-PON multicast service, ranging from 65439 to 65534. The default value is 65534. | ||||
| ShwGponOntWanConfigMode | 1.3.6.1.4.1.2011.6.145.1.1.3.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current The mode of gpon ont wan config mode. Options: 1. setAfterCreate(1) - The mode of gpon wan config mode is set-after-create 2. setByCreate(2) - The mode of gpon wan config mode is set-by-create
| ||||
| ShwGponDeviceAntiDosPloamSwitch | 1.3.6.1.4.1.2011.6.145.1.1.3.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch value of anti-dos PLOAM. Options: 1. enable(1) - The switch value of anti-dos PLOAM is enable 2. disable(2) - The switch value of anti-dos PLOAM is disable The default value is disable(2)
| ||||
| ShwGponOntHomeGatewayConfigMethod | 1.3.6.1.4.1.2011.6.145.1.1.3.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current The config method of home gateway. Options: 1. xml(1) - The config method of home gateway is xml. 2. omci(2) - The config method of home gateway is omci.
| ||||
| ShwGponDeviceSnOutPutFormatPolicy | 1.3.6.1.4.1.2011.6.145.1.1.3.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current The output format of SN. Options: 1. default(1) - The output format of SN is default 2. vendorPrefix(2) - The output format of SN is vendor-prefix The default value is default(1)
| ||||
| ShwGponDeviceOmciBandwidthCompensateSwitch | 1.3.6.1.4.1.2011.6.145.1.1.3.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch value of omci bandwidth compensate. Options: 1. enable(1) - The switch value of omci bandwidth compensate is enable 2. disable(2) - The switch value of omci bandwidth compensate is disable 3. invalid(-1) - The switch value of omci bandwidth compensate is invalid The default value is disable(2)
| ||||
| ShwGponOntVlanTagOperMode | 1.3.6.1.4.1.2011.6.145.1.1.3.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current The mode of gpon ont vlan tag operation mode. Options: 1. modifyExternalTag(1) - The mode of gpon vlan tag operation mode is modify-external-tag 2. modifySingleTag(2) - The mode of gpon vlan tag operation mode is modify-single-tag,this is the default mode.
| ||||
| ShwGponOntAniMVlanFilter | 1.3.6.1.4.1.2011.6.145.1.1.3.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates the mode of multicast VLAN filtering on the GPON ONT ANI side. Options: 1. default(0) -Indicates the default system behavior. 2. enable(1) -Creates the multicast VLAN tagging filter data entity on the ANI side and issues the multicast VLAN to this entity. 3. disable(2) -Do not create the multicast VLAN tagging filter data entity on the ANI side or issue the multicast VLAN to this entity. The default value is default(0).
| ||||
| ShwGponOntQueueMapQueue0ID | 1.3.6.1.4.1.2011.6.145.1.1.3.19 | Integer32 (0..3 | 255) | RW | |
scalar · Integer32 (0..3 | 255) · read-write · current Configures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently. Otherwise, the OLT reports an error. 1. queue0-id to queue7-id are IDs mapping virtual queues to actual ONT queues. The value range is 0-3. The current OMCI protocol supports scenarios of 4 queues and 8 queues. If the ONT has 8 queues, this configuration does not take effect. If the ONT has 4 queues, this configuration takes effect. 2. This operation affects services of all online ONUs. 3. queue0-id to queue7-id configured by running this command must start from 0 and are configured in ascending order. 4. The 8 queues must completely map to 4 queues, that is, values 0-3 must be configured. Options: 0..3. Indicates IDs of actual ONT queues. 0xff. Indicates configuration deletion. | ||||
| ShwGponOntQueueMapQueue1ID | 1.3.6.1.4.1.2011.6.145.1.1.3.20 | Integer32 (0..3 | 255) | RW | |
scalar · Integer32 (0..3 | 255) · read-write · current Configures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently. Otherwise, the OLT reports an error. 1. Queue0-id to queue7-id are IDs mapping virtual queues to actual ONT queues. The value range is 0-3. The current OMCI protocol supports scenarios of 4 queues and 8 queues. If the ONT has 8 queues, this configuration does not take effect. If the ONT has 4 queues, this configuration takes effect. 2. This operation affects services of all online ONUs. 3. Queue0-id to queue7-id configured by running this command must start from 0 and are configured in ascending order. 4. The 8 queues must completely map to 4 queues, that is, values 0-3 must be configured. Options: 0..3. Indicates IDs of actual ONT queues. 0xff. Indicates configuration deletion. | ||||
| ShwGponOntQueueMapQueue2ID | 1.3.6.1.4.1.2011.6.145.1.1.3.21 | Integer32 (0..3 | 255) | RW | |
scalar · Integer32 (0..3 | 255) · read-write · current Configures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently. Otherwise, the OLT reports an error. 1. Queue0-id to queue7-id are IDs mapping virtual queues to actual ONT queues. The value range is 0-3. The current OMCI protocol supports scenarios of 4 queues and 8 queues. If the ONT has 8 queues, this configuration does not take effect. If the ONT has 4 queues, this configuration takes effect. 2. This operation affects services of all online ONUs. 3. Queue0-id to queue7-id configured by running this command must start from 0 and are configured in ascending order. 4. The 8 queues must completely map to 4 queues, that is, values 0-3 must be configured. Options: 0..3. Indicates IDs of actual ONT queues. 0xff. Indicates configuration deletion. | ||||
| ShwGponOntQueueMapQueue3ID | 1.3.6.1.4.1.2011.6.145.1.1.3.22 | Integer32 (0..3 | 255) | RW | |
scalar · Integer32 (0..3 | 255) · read-write · current Configures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently. Otherwise, the OLT reports an error. 1. Queue0-id to queue7-id are IDs mapping virtual queues to actual ONT queues. The value range is 0-3. The current OMCI protocol supports scenarios of 4 queues and 8 queues. If the ONT has 8 queues, this configuration does not take effect. If the ONT has 4 queues, this configuration takes effect. 2. This operation affects services of all online ONUs. 3. Queue0-id to queue7-id configured by running this command must start from 0 and are configured in ascending order. 4. The 8 queues must completely map to 4 queues, that is, values 0-3 must be configured. Options: 0..3. Indicates IDs of actual ONT queues. 0xff. Indicates configuration deletion. | ||||
| ShwGponOntQueueMapQueue4ID | 1.3.6.1.4.1.2011.6.145.1.1.3.23 | Integer32 (0..3 | 255) | RW | |
scalar · Integer32 (0..3 | 255) · read-write · current Configures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently. Otherwise, the OLT reports an error. 1. Queue0-id to queue7-id are IDs mapping virtual queues to actual ONT queues. The value range is 0-3. The current OMCI protocol supports scenarios of 4 queues and 8 queues. If the ONT has 8 queues, this configuration does not take effect. If the ONT has 4 queues, this configuration takes effect. 2. This operation affects services of all online ONUs. 3. Queue0-id to queue7-id configured by running this command must start from 0 and are configured in ascending order. 4. The 8 queues must completely map to 4 queues, that is, values 0-3 must be configured. Options: 0..3. Indicates IDs of actual ONT queues. 0xff. Indicates configuration deletion. | ||||
| ShwGponOntQueueMapQueue5ID | 1.3.6.1.4.1.2011.6.145.1.1.3.24 | Integer32 (0..3 | 255) | RW | |
scalar · Integer32 (0..3 | 255) · read-write · current Configures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently. Otherwise, the OLT reports an error. 1. Queue0-id to queue7-id are IDs mapping virtual queues to actual ONT queues. The value range is 0-3. The current OMCI protocol supports scenarios of 4 queues and 8 queues. If the ONT has 8 queues, this configuration does not take effect. If the ONT has 4 queues, this configuration takes effect. 2. This operation affects services of all online ONUs. 3. Queue0-id to queue7-id configured by running this command must start from 0 and are configured in ascending order. 4. The 8 queues must completely map to 4 queues, that is, values 0-3 must be configured. Options: 0..3. Indicates IDs of actual ONT queues. 0xff. Indicates configuration deletion. | ||||
| ShwGponOntQueueMapQueue6ID | 1.3.6.1.4.1.2011.6.145.1.1.3.25 | Integer32 (0..3 | 255) | RW | |
scalar · Integer32 (0..3 | 255) · read-write · current Configures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently. Otherwise, the OLT reports an error. 1. Queue0-id to queue7-id are IDs mapping virtual queues to actual ONT queues. The value range is 0-3. The current OMCI protocol supports scenarios of 4 queues and 8 queues. If the ONT has 8 queues, this configuration does not take effect. If the ONT has 4 queues, this configuration takes effect. 2. This operation affects services of all online ONUs. 3. Queue0-id to queue7-id configured by running this command must start from 0 and are configured in ascending order. 4. The 8 queues must completely map to 4 queues, that is, values 0-3 must be configured. Options: 0..3. Indicates IDs of actual ONT queues. 0xff. Indicates configuration deletion. | ||||
| ShwGponOntQueueMapQueue7ID | 1.3.6.1.4.1.2011.6.145.1.1.3.26 | Integer32 (0..3 | 255) | RW | |
scalar · Integer32 (0..3 | 255) · read-write · current Configures the rule of mapping the GPON ONT virtual queue to actual queue. Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently. Otherwise, the OLT reports an error. 1. Queue0-id to queue7-id are IDs mapping virtual queues to actual ONT queues. The value range is 0-3. The current OMCI protocol supports scenarios of 4 queues and 8 queues. If the ONT has 8 queues, this configuration does not take effect. If the ONT has 4 queues, this configuration takes effect. 2. This operation affects services of all online ONUs. 3. Queue0-id to queue7-id configured by running this command must start from 0 and are configured in ascending order. 4. The 8 queues must completely map to 4 queues, that is, values 0-3 must be configured. Options: 0..3. Indicates IDs of actual ONT queues. 0xff. Indicates configuration deletion. | ||||
| ShwGponDeviceGemPortEncryptMode | 1.3.6.1.4.1.2011.6.145.1.1.3.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the automatic allocation gemport encrypt mode. Options: 1. on(1) - Indicates that the automatic allocation gemport encrypt mode is on 2. off(2) - Indicates that the automatic allocation gemport encrypt mode is off The default value is off(2).
| ||||
| ShwGponDeviceOntLOOCiAlarmThreshold | 1.3.6.1.4.1.2011.6.145.1.1.3.28 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current This object indicates the GPON LOOCi alarm generation threshold, in times. The restoration threshold must be lower than the generation threshold. The default value is 100. | ||||
| ShwGponDeviceOntLOOCiAlarmRestoreThreshold | 1.3.6.1.4.1.2011.6.145.1.1.3.29 | Integer32 (0..99) | RW | |
scalar · Integer32 (0..99) · read-write · current This object indicates the GPON LOOCi alarm restoration threshold, in times. The restoration threshold must be lower than the generation threshold. The default value is 0. | ||||
| ShwGponDeviceOntLOOCiAlarmMonitorPeriod | 1.3.6.1.4.1.2011.6.145.1.1.3.30 | Integer32 (60..900) | RW | |
scalar · Integer32 (60..900) · read-write · current This object indicates GPON LOOCi alarm monitoring period, in seconds. The default value is 900. | ||||
| NhwXponDeviceCommonGlobalObjects | 1.3.6.1.4.1.2011.6.145.1.1.4 | |||
| ShwXponDeviceLosAlarmControlState | 1.3.6.1.4.1.2011.6.145.1.1.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to open or close the switch of the advanced los alarm. Options: 1.enable(1) - Open the switch of the advanced los alarm 2.disable(2) - Close the switch of the advanced los alarm The default value is disable(2).
| ||||
| ShwXponCommonOntCatvDefaultState | 1.3.6.1.4.1.2011.6.145.1.1.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to set the default status of ONT CATV ports. Options: 1. on(1) - The default status of ONT CATV ports is on 2. off(2) - The default status of ONT CATV ports is off 3. invalid(-1) - Indicates that the query fails
| ||||
| ShwXponDeviceGroupPowerOffControlState | 1.3.6.1.4.1.2011.6.145.1.1.4.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to open or close the group power off report switch. Options: 1.enable(1) - Open the group power off report switch 2.disable(2) - Close the group power off report switch The default value is disable(2)
| ||||
| ShwXponDeviceAutofindConflictCheckSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to open or close the ONT autofind conflict-check switch. Options: 1.enable(1) - Open the switch of the ONT autofind conflict-check 2.disable(2) - Close the switch of the ONT autofind conflict-check The default value is disable(2)
| ||||
| ShwXponDeviceModifyBoundProfileSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable or disable the bound profile modification switch. Options: 1.enable(1) - Enable to modify bound profile 2.disable(2) - Disable to modify bound profile 3.invalid(-1) - Indicates that the query fails The default value is enable(1).
| ||||
| ShwXponDeviceAlarmClearOnShutdown | 1.3.6.1.4.1.2011.6.145.1.1.4.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to set whether clear active alarm on shutdown object. Options: 1.enable(1) - Open the switch, clear active alarm on shutdown object 2.disable(2) - Close the switch, does not clear active alarm on shutdown object The default value is disable(2).
| ||||
| ShwXponDeviceSuppressInitialAlarmState | 1.3.6.1.4.1.2011.6.145.1.1.4.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to set whether suppress initial alarm. Options: 1.enable(1) - Open the switch, suppress initial alarm state 2.disable(2) - Close the switch, does not suppress initial alarm state 3.enableexceptopticalalarm(3) - Suppress other alarms, does not suppress optical module The default value is enable(1).
| ||||
| ShwXponDeviceAllowDifferentRangeSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable or disable the switch of allowing protect group member ports have different distances. Options: 1.enable(1) - Enable the switch of allowing protect group member ports have different distances 2.disable(2) - Disable the switch of allowing protect group member ports have different distances The default value is disable(2).
| ||||
| ShwXponOntInteroperabilityFileVersion | 1.3.6.1.4.1.2011.6.145.1.1.4.9 | OCTET STRING (SIZE (9)) | RO | |
scalar · OCTET STRING (SIZE (9)) · read-only · current This object is used to query the version of the ont interoperability file. The value of this node: Year(2byte) : 65535-invalid Month(1byte) : 255-invalid Day(1byte) : 255-invalid Hour(1byte) : 255-invalid Minute(1byte) : 255-invalid Second(1byte) : 255-invalid CrcCode(2byte) : The CRC value of ont interoperability file. | ||||
| ShwXponDeviceOperatorCheckSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to set operator check switch. Options: 1.enable(1) - Open the switch 2.disable(2) - Close the switch The default value is disable(2).
| ||||
| ShwXponDeviceOperatorCheckCode | 1.3.6.1.4.1.2011.6.145.1.1.4.11 | OCTET STRING (SIZE (0..16)) | RW | |
scalar · OCTET STRING (SIZE (0..16)) · read-write · current The object is used to set operator check code. | ||||
| ShwXponDeviceOperatorCheckHistoryCodeMaxNumber | 1.3.6.1.4.1.2011.6.145.1.1.4.12 | Integer32 | RW | |
scalar · Integer32 · read-write · current The object is used to set max number of operator check history code. range: 0-11. | ||||
| ShwXponDeviceOperatorCheckHistoryCodeClear | 1.3.6.1.4.1.2011.6.145.1.1.4.13 | OCTET STRING (SIZE (0..16)) | RW | |
scalar · OCTET STRING (SIZE (0..16)) · read-write · current The object is used to clear operator check history code. | ||||
| ShwXponCommonDeviceOntPowerReductionSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to open or close the ONT global switch. Options: 1.enable(1) - Open the switch of the ONT power reduction. 2.disable(2) - Close the switch of the ONT power reduction. The default value is disable(2)
| ||||
| ShwXponDeviceAntiWeakLightRogueSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable or disable the function of anti-rogue ONTs that transmit weak optical signals. Options: 1.enable(1) - Enable the function of anti-rogue ONTs that transmit weak optical signals. 2.disable(2) - Disable the function of anti-rogue ONTs that transmit weak optical signals. The default value is disable(2)
| ||||
| ShwXponDeviceOntUserMulticastProcess | 1.3.6.1.4.1.2011.6.145.1.1.4.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the processing mode of the ONT user-side multicast packet. Options: 1.forward(1) - Indicates the forward processing mode. 2.discard(2) - Indicates the discard processing mode. The default value is forward(1).
| ||||
| ShwXponDevicePortFaultCheckSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the switch value of PON fault check. Options: 1.enable(1) - The switch value of PON fault check is enable. 2.disable(2) - The switch value of PON fault check is disable. The default value is disable(2).
| ||||
| ShwXponDeviceRogueOntSelfDetectSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the self-detected switch of rogue ONTs.
Options:
1.enable(1) - The self-detected switch of rogue ONTs is enable.
2.disable(2) - The self-detected switch of rogue ONTs is disable.
3.unconcern(3) - The self-detected switch of rogue ONTs is unconcern.
The default value is unconcern(3).
| ||||
| ShwXponDeviceOntOfflineMonitorSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the switch value of ONTs offline monitoring. Options: 1.enable(1) - The switch of ONTs offline monitoring is enable. 2.disable(2) - The switch of ONTs offline monitoring is disable. The default value is disable(2).
| ||||
| ShwXponDeviceOntOfflineMonitorAlarmThresholdRatio | 1.3.6.1.4.1.2011.6.145.1.1.4.20 | Integer32 (0..100) | RW | |
scalar · Integer32 (0..100) · read-write · current This object indicates the ratio of ONTS offline monitoring alarm generation threshold. The restoration threshold must be higher than the generation threshold. The default value is 70. | ||||
| ShwXponDeviceOntOfflineMonitorRestoreThresholdRatio | 1.3.6.1.4.1.2011.6.145.1.1.4.21 | Integer32 (0..100) | RW | |
scalar · Integer32 (0..100) · read-write · current This object indicates the ratio of ONTS offline monitoring alarm restoration threshold. The restoration threshold must be higher than the generation threshold. The default value is 80. | ||||
| ShwXponDeviceTypeBLosAlarmControlState | 1.3.6.1.4.1.2011.6.145.1.1.4.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to open or close the switch of the los alarm for the standby port in the Type B protect group. Options: 1.enable(1) - Open the switch of the los alarm for the standby port in the Type B protect group 2.disable(2) - Close the switch of the los alarm for the standby port in the Type B protect group The default value is disable(2).
| ||||
| ShwXponDeviceOltOpticalAlarmAutoMonitorSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to configure automatic monitoring on OLT optical alarm, the function will be disabled when the PON port is bound to optical alarm profile. Options: 1. disable(2) - The function is disabled 2. opticalThreshold (11) - The function is enabled, the optical threshold is read from the optical module, which is defined by the manufacturer 3. standardThreshold(12) - The function is enabled, the alarm threshold is defined by the standard threshold 4. invalid(-1) - Indicates that the query fails or no information is detected The default value is disable(2).
| ||||
| ShwXponDeviceOntOpticalAlarmAutoMonitorSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to configure automatic monitoring on ONT optical alarm, the function will be disabled when the ONT is bound to optical alarm profile. Options: 1. disable(2) - The function is disabled 2. opticalThreshold (11) - The function is enabled, the optical threshold is read from the optical module, which is defined by the manufacturer 3. standardThreshold(12) - The function is enabled, the alarm threshold is defined by the standard threshold 4. invalid(-1) - Indicates that the query fails or no information is detected The default value is disable(2).
| ||||
| ShwXponDeviceVsOntIdAllocPolicy | 1.3.6.1.4.1.2011.6.145.1.1.4.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the ONT ID alloc policy of virtual system. Options: 1.global(1) - The ONT ID alloc policy is global. 2.independent(2) - The ONT ID alloc policy is independent. The default value is independent(2).
| ||||
| ShwXponDeviceOntLowBandwidthUsageMonitorSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable or disable monitoring on ONT abnormal bandwidth request. Options: 1.enable(1) - Enable monitoring on ONT abnormal bandwidth request 2.disable(2) - Disable monitoring on ONT abnormal bandwidth request The default value is enable(1).
| ||||
| ShwXponDeviceAntiRogueOamOntAutoIsolateMode | 1.3.6.1.4.1.2011.6.145.1.1.4.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the anti-rogueont isolation mode for OAM management mode ONT, it is used for EPON ONT. Options: 1.deactivate(1) - Indicates that the isolation mode is deactivate. 2.reset(2) - Indicates that the isolation mode is reset. 3.disable(3) - Indicates that the isolation mode is disable. The default value is disable(3).
| ||||
| ShwXponDeviceAntiRogueSnmpOntAutoIsolateMode | 1.3.6.1.4.1.2011.6.145.1.1.4.28 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the anti-rogueont isolation mode for SNMP management mode ONT,it is used for EPON MxU. Options: 1.deactivate(1) - Indicates that the isolation mode is deactivate. 2.reset(2) - Indicates that the isolation mode is reset. 3.disable(3) - Indicates that the isolation mode is disable. The default value is disable(3).
| ||||
| ShwXponDeviceOntOpticalDdmQuickQuerySwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.29 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable or disable fast query of DDM parameters of an ONT optical module.
Options:
1.disable(1) - Indicates that fast query of DDM parameters of an ONT optical module is disabled.
2.enable(2) - Indicates that fast query of DDM parameters of an ONT optical module is enabled.
3.invalidState(-1) - Indicates that the query fails or no information is detected.
The default value is disable(1).
| ||||
| ShwXponDeviceAutoRecoverySwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the xPON auto recovery switch. Options: 1. enable(1) - Indicates that the xPON auto recovery switch is enable 2. disable (2) - Indicates that the xPON auto recovery switch is disable The default value is enable(1).
| ||||
| ShwXponDeviceAuthConflictCheckBySnSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.31 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the switch value of ONT authentication conflict check by SN. Options: 1.enable(1) - Indicates that the switch value of ONT authentication conflict check by SN is enable,ONT unique SN in system. 2.disable(2) - Indicates that the switch value of ONT authentication conflict check by SN is disable, ONT unique SN in port. The default value is enable(1).
| ||||
| ShwXponDeviceAuthConflictCheckByLoidSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.32 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the switch value of ONT authentication conflict check by LOID. Options: 1.enable(1) - Indicates that the switch value of ONT authentication conflict check by LOID is enable,ONT unique LOID in system. 2.disable(2) - Indicates that the switch value of ONT authentication conflict check by LOID is disable, ONT unique LOID in port. The default value is enable(1).
| ||||
| ShwXponDeviceOperatorCheckVersion | 1.3.6.1.4.1.2011.6.145.1.1.4.33 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to set operator check version Options: 1.version1(1), - set operator check version1 2.version2(2), - set operator check version2 The default value is version1(1).
| ||||
| ShwXponDeviceAutoFindAdditionalNoticeTimes | 1.3.6.1.4.1.2011.6.145.1.1.4.34 | Integer32 (0..10) | RW | |
scalar · Integer32 (0..10) · read-write · current The object indicates the times of sending auto-found ONT additional notices. The value ranges from 0 to 10. If this parameter is set to 0, the auto found ONT additional notice function is disabled. This node must be set together with the hwXponDeviceAutoFindAdditionalNoticeDistanceTime node. | ||||
| ShwXponDeviceAutoFindAdditionalNoticeDistanceTime | 1.3.6.1.4.1.2011.6.145.1.1.4.35 | Integer32 (255 | 30..100) | RW | |
scalar · Integer32 (255 | 30..100) · read-write · current The object indicates the interval for sending auto-found ONT additional notices. The value ranges from 30s to 100s. This node must be set together with the hwXponDeviceAutoFindAdditionalNoticeDistanceTime node. If the function of sending auto-found ONT additional notices is disabled, this node is set to 255 which is an invalid value. | ||||
| ShwXponDeviceOpticalModuleAlarmControlSwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.36 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object is used to decide whether initial optical module alarm should be reported or suppressed when a port is shut down.
Options:
1.enable(1) - When a port is shut down, no alarm will be reported if we plug-out the optical module.
2.disable(2) - When a port is shut down, plug-out the optical module, alarm will be reported;
But if there's no optical module at the beginning, no alarm will be reported.
The default value is enable(1).
| ||||
| ShwXponDeviceOpticalTraceabilitySwitch | 1.3.6.1.4.1.2011.6.145.1.1.4.37 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the optical traceability switch. Options: 1. enable(1) - Indicates that the optical traceability switch is enable 2. disable(2) - Indicates that the optical traceability switch is disable The default value is disable(2).
| ||||
| ShwXponDeviceLosAlarmControlDyingGaspONTNumberRatio | 1.3.6.1.4.1.2011.6.145.1.1.4.38 | Integer32 (0..100) | RW | |
scalar · Integer32 (0..100) · read-write · current The object is used to set threshold number ratio of Dyinggasp ONT number to send LOS alarm, the unit is %. The value 0 indicates that the ratio is unconcern to send LOS alarm. The default value is 0. | ||||
| ShwXponDeviceLosAlarmControlDyingGaspONTTime | 1.3.6.1.4.1.2011.6.145.1.1.4.39 | Integer32 (6..600) | RW | |
scalar · Integer32 (6..600) · read-write · current The object is used to set threshold time of Dyinggasp ONT to send LOS alarm, the unit is s. The default value is 6s. | ||||
| ShwXponDeviceTotalONTNumber | 1.3.6.1.4.1.2011.6.145.1.1.4.40 | Integer32 | RO | |
scalar · Integer32 · read-only · current The object is used to get the total number of ONT in the OLT device. | ||||
| ShwXponDeviceTotalOnlineONTNumber | 1.3.6.1.4.1.2011.6.145.1.1.4.41 | Integer32 | RO | |
scalar · Integer32 · read-only · current The object is used to get the total number of online ONT in the OLT device. | ||||
| ShwXponDeviceTotalOfflineONTNumber | 1.3.6.1.4.1.2011.6.145.1.1.4.42 | Integer32 | RO | |
scalar · Integer32 · read-only · current The object is used to get the total number of offline ONT in the OLT device. | ||||
| NhwXponDeviceCommonProfileObjects | 1.3.6.1.4.1.2011.6.145.1.1.5 | |||
| ThwXponOntAlarmPolicyTable | 1.3.6.1.4.1.2011.6.145.1.1.5.1 | NA | ||
table · not-accessible · current The hwXponOntAlarmPolicyTable is used to config the ONT alarm policy profile. The index of this table is hwXponOntAlarmPolicyNameIndex. | ||||
| RhwXponOntAlarmPolicyEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1 | NA | ||
row · not-accessible · current The hwXponOntAlarmPolicyTable is used to config the ONT alarm policy profile. The index of this entry is hwXponOntAlarmPolicyNameIndex. | ||||
| ChwXponOntAlarmPolicyNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the ONT alarm policy profile name index. | ||||
| ChwXponOntAlarmPolicyBindNum | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of ONT bound with alarm policy profile. | ||||
| ChwXponOntAlarmPolicyFilterAlarmNum | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.3 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current This object indicates the number of filtered alarm of the alarm policy profile. | ||||
| ChwXponOntAlarmPolicyFilterAlarmList | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.4 | OCTET STRING (SIZE (0..400)) | RW | |
column · OCTET STRING (SIZE (0..400)) · read-write · current This object indicates the filtered alarm list of the alarm policy profile,and each alarm ID takes 4 bytes. | ||||
| ChwXponOntAlarmPolicyUnFilterAlarmNum | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.5 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current This object indicates the number of unfiltered alarm of the alarm policy profile. | ||||
| ChwXponOntAlarmPolicyUnFilterAlarmList | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.6 | OCTET STRING (SIZE (0..400)) | RW | |
column · OCTET STRING (SIZE (0..400)) · read-write · current This object indicates the unfiltered alarm list of the alarm policy profile,and each alarm ID takes 4 bytes. | ||||
| ChwXponOntAlarmPolicyRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponOntAlarmPolicyRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ChwXponOntAlarmPolicyAppendPolicyName | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates if the ONT alarm appends ONT alarm policy profile name. Options: 1.enable(1) - The ONT alarm appends ONT alarm policy profile name.. 2.disable(2) - The ONT alarm does not append ONT alarm policy profile name.. The default value is enable(1).
| ||||
| ChwXponOntAlarmPolicyAppendIpAddress | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates if the ONT alarm appends IP address. Options: 1.enable(1) - The ONT alarm appends IP address. 2.disable(2) - The ONT alarm does not append IP address. The default value is disable(2).
| ||||
| ChwXponOntAlarmPolicyAppendMac | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates if the ONT alarm appends MAC. Options: 1.enable(1) - The ONT alarm appends MAC. 2.disable(2) - The ONT alarm does not append MAC. The default value is disable(2).
| ||||
| ChwXponOntAlarmPolicyAppendSn | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates if the ONT alarm appends SN. Options: 1.enable(1) - The ONT alarm appends SN. 2.disable(2) - The ONT alarm does not append SN. The default value is disable(2).
| ||||
| ChwXponOntAlarmPolicyAppendLoid | 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates if the ONT alarm appends LOID. Options: 1.enable(1) - The ONT alarm appends LOID. 2.disable(2) - The ONT alarm does not append LOID. The default value is disable(2).
| ||||
| ThwXponDeviceOntPowerSheddingProfileTable | 1.3.6.1.4.1.2011.6.145.1.1.5.2 | NA | ||
table · not-accessible · current The hwXponDeviceOntPowerSheddingProfileTable is used to config the ONT power shedding profile. The index of this table is hwXponDeviceOntPowerSheddingProfileNameIndex. | ||||
| RhwXponDeviceOntPowerSheddingProfileEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1 | NA | ||
row · not-accessible · current The hwXponDeviceOntPowerSheddingProfileTable is used to config the ONT power shedding profile. The index of this entry is hwXponDeviceOntPowerSheddingProfileNameIndex. | ||||
| ChwXponDeviceOntPowerSheddingProfileNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the ONT power shedding profile name index. | ||||
| ChwXponDeviceOntPowerSheddingProfileBindNum | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of ONT bound with power shedding profile. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassData | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.3 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of data class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassVoice | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.4 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of voice class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassVideoOverlay | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of video overlay class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassVideoReturn | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.6 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of video return class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassDsl | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.7 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of DSL class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassAtm | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.8 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of ATM class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassCes | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.9 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of CES class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassFrame | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.10 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of frame class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingIntervalClassSdhSonet | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.11 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the power shedding interval of sdh-sonet class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. | ||||
| ChwXponDeviceOntPowerSheddingRestoreInterval | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.12 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the time delay, in seconds, before resetting the power-shedding timers after full power restoration. | ||||
| ChwXponDeviceOntPowerSheddingProfileRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponDeviceOntPowerSheddingProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntTr069ServerProfileTable | 1.3.6.1.4.1.2011.6.145.1.1.5.3 | NA | ||
table · not-accessible · current This table is used to create, delete or modify the tr069 server profile. The index of this table is hwXponOntTr069ServerProfileName. | ||||
| RhwXponOntTr069ServerProfileEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.3.1 | NA | ||
row · not-accessible · current This table is used to create, delete or modify the tr069 server profile. The index of this entry is hwXponOntTr069ServerProfileName. | ||||
| ChwXponOntTr069ServerProfileName | 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the tr069-server-profile name. | ||||
| ChwXponOntTr069ServerProfileBindTimes | 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of ONT bound with tr069-server-profile. | ||||
| ChwXponOntTr069ServerProfileUrl | 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.3 | OCTET STRING (SIZE (1..63)) | RW | |
column · OCTET STRING (SIZE (1..63)) · read-write · current This object indicates the server URL. For example: you can set the value of the leaf like 'www.huawei.com'. | ||||
| ChwXponOntTr069ServerProfileUserName | 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.4 | OCTET STRING (SIZE (0..50)) | RW | |
column · OCTET STRING (SIZE (0..50)) · read-write · current This object indicates the user name. | ||||
| ChwXponOntTr069ServerProfilePassword | 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.5 | OCTET STRING (SIZE (0..25)) | RW | |
column · OCTET STRING (SIZE (0..25)) · read-write · current This object indicates the user password. | ||||
| ChwXponOntTr069ServerProfileRealm | 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.6 | OCTET STRING (SIZE (0..24)) | RW | |
column · OCTET STRING (SIZE (0..24)) · read-write · current This object indicates the server realm. | ||||
| ChwXponOntTr069ServerProfileRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current TRow status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntAlarmPolicyAlarmTable | 1.3.6.1.4.1.2011.6.145.1.1.5.4 | NA | ||
table · not-accessible · current This table is used to set the ONT alarm level. The index of this table is hwXponOntAlarmPolicyCfgNameIndex and hwXponOntAlarmPolicyAlarmId. | ||||
| RhwXponOntAlarmPolicyAlarmEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.4.1 | NA | ||
row · not-accessible · current This table is used to set the ONT alarm level. The index of this entry is hwXponOntAlarmPolicyCfgNameIndex and hwXponOntAlarmPolicyAlarmId. | ||||
| ChwXponOntAlarmPolicyCfgNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.4.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the ONT alarm policy profile name index. | ||||
| ChwXponOntAlarmPolicyAlarmId | 1.3.6.1.4.1.2011.6.145.1.1.5.4.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the ONT alarm ID. | ||||
| ChwXponOntAlarmPolicyAlarmLevel | 1.3.6.1.4.1.2011.6.145.1.1.5.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the ONT alarm level. Options: 1. critical(1) - The ONT alarm level is critical. 2. major(2) - The ONT alarm level is major. 3. minor(3) - The ONT alarm level is minor. 4. warning(4) - The ONT alarm level is warning. 5. unconcern(-1) - The ONT alarm severity is unconcerned in the ONT alarm policy profile. The default value is unconcern(-1).
| ||||
| ThwXponOntFtpServerProfileTable | 1.3.6.1.4.1.2011.6.145.1.1.5.5 | NA | ||
table · not-accessible · current This table is used to create, delete or modify the FTP server profile. The index of this table is hwXponOntFtpServerProfileNameIndex. | ||||
| RhwXponOntFtpServerProfileEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.5.1 | NA | ||
row · not-accessible · current This table is used to create, delete or modify the FTP server profile. The index of this entry is hwXponOntFtpServerProfileNameIndex. | ||||
| ChwXponOntFtpServerProfileNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.5.1.1 | OCTET STRING (SIZE (1..15)) | NA | |
column · OCTET STRING (SIZE (1..15)) · not-accessible · current This object indicates the name of FTP server profile. | ||||
| ChwXponOntFtpServerProfileAddress | 1.3.6.1.4.1.2011.6.145.1.1.5.5.1.2 | OCTET STRING (SIZE (1..63)) | RW | |
column · OCTET STRING (SIZE (1..63)) · read-write · current This object indicates the address of FTP server profile. the format of string should be like ftp://127.0.0.1 or ftps://127.0.0.1 | ||||
| ChwXponOntFtpServerProfilePort | 1.3.6.1.4.1.2011.6.145.1.1.5.5.1.3 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current This object indicates the port of FTP server profile. The default value is 21. | ||||
| ChwXponOntFtpServerProfileUserName | 1.3.6.1.4.1.2011.6.145.1.1.5.5.1.4 | OCTET STRING (SIZE (0..15)) | RW | |
column · OCTET STRING (SIZE (0..15)) · read-write · current This object indicates the user name of FTP server. | ||||
| ChwXponOntFtpServerProfilePassword | 1.3.6.1.4.1.2011.6.145.1.1.5.5.1.5 | OCTET STRING (SIZE (0..15)) | RW | |
column · OCTET STRING (SIZE (0..15)) · read-write · current This object indicates the password of FTP server. | ||||
| ChwXponOntFtpServerProfileRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.5.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponOntFtpServerProfileRowStatus is used to create a new row or to modify or to delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponDeviceOntPowerReductionProfileTable | 1.3.6.1.4.1.2011.6.145.1.1.5.6 | NA | ||
table · not-accessible · current This table is used to create, delete, or modify the power reduction profile. It can contain 32 power reduction profiles in total.Power reduction profile is a kind of profile that can be bound to one or more ONT(s) at the same time and it specify how and when the ONT(s) perform power reduction function. The index of this table is hwXponDeviceOntPowerReductionProfileNameIndex. | ||||
| RhwXponDeviceOntPowerReductionProfileEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1 | NA | ||
row · not-accessible · current This table is used to create, delete, or modify the power reduction profile. It can contain 32 power reduction profiles in total.Power reduction profile is a kind of profile that can be bound to one or more ONT(s) at the same time and it specify how and when the ONT(s) perform power reduction function. The index of this entry is hwXponDeviceOntPowerReductionProfileNameIndex. | ||||
| ChwXponDeviceOntPowerReductionProfileNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the name of the power reduction profile. | ||||
| ChwXponDeviceOntPowerReductionProfileBindNum | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of ONTs bound with power reduction profile. | ||||
| ChwXponDeviceOntPowerReductionMode | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the power reduction mode of this profile. Options: 1.disable(1) -disable mode:disable power reduction function for this profile,then ONTs bound to this profile will run normally without power-reduction.. 2.doze(2) -doze mode:when in a LowPower state (the Asleep state) in this mode the ONT receiver remains active, ONT can receive downstream traffic,but it will deactivate its transmitter periodicly ,at this time it can't send its upstream traffic. 3.cyclicSleep(3) -cyclic sleep mode:when in a LowPower state (the Asleep state) in this mode, the ONT receiver is inactive;the ONT cannot receive downstream traffic. its transmitter is also inactive,so it can't send its upstream traffic. 4.watchfulSleep(4) -watchful sleep mode:when in a LowPower state (the Watch state) in this mode, the ONT periodically checks the downstream traffic for wakeup indications from the OLT. 5.auto(5) -auto negotiation mode:Indicates that ONT can select one of the power reduction modes above that it can support to perform power reduction. The default value is disable(1).
| ||||
| ChwXponDeviceOntPowerReductionSleepInterval | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Indicateas the time that ONT stays in a LowPower status in power reduction state periodicly. The valid value range is 1--500ms The default value is 200ms | ||||
| ChwXponDeviceOntPowerReductionAwakeInterval | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Indicateas the time that ONT stays in awake status in power reduction state periodicly The valid value range is 1--100ms The default value is 20ms | ||||
| ChwXponDeviceOntPowerReductionEnterInterval | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the time interval that ONT needs to enter power reduction state,during this time,the ONT will check if it can enter power reduction state. The valid value range is 1--900s The default value is 300s | ||||
| ChwXponDeviceOntPowerReductionUpstreamEnterRate | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the upstream rate threshold that ONT needs to enter power reduction state,during enter-interval time,if its upstream rate is continuously lower then this threshold,then the ONT will enter power reduction state if it is bound to power reduction profile and meets other conditions. The valid value range is 1--100pps The default value is 3pps | ||||
| ChwXponDeviceOntPowerReductionDownstreamEnterRate | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the downstream rate threshold that ONT needs to enter power reduction state,during enter-interval time,if its downstream rate is continuously lower then this threshold,then the ONT will enter power reduction state if it is bound to power reduction profile and meets other conditions. The valid value range is 1--100pps The default value is 3pps | ||||
| ChwXponDeviceOntPowerReductionExitInterval | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the time interval that ONT needs to exit power reduction state,during this time,the ONT will check if it need to exit power reduction state. The valid value range is 1--60s The default value is 3s | ||||
| ChwXponDeviceOntPowerReductionUpstreamExitRate | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the upstream rate threshold that ONT needs to exit power reduction state,during exit-interval time,if its upstream rate is continuously higher then this threshold,then the ONT will exit power reduction state if it is bound to power reduction profile and meets other conditions. The valid value range is 1--100pps The default value is 3pps | ||||
| ChwXponDeviceOntPowerReductionDownstreamExitRate | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the downstream rate threshold that ONT needs to exit power reduction state. during exit-interval time,if its downstream rate is continuously higher then this threshold,then the ONT will exit power reduction state if it is bound to power reduction profile and meets other conditions. The valid value range is 1--100pps The default value is 3pps | ||||
| ChwXponDeviceOntPowerReductionUpstreamExitBurstRate | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.12 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the upstream burst rate threshold that ONT needs to exit power reduction state. during exit-interval time,if its upstream burst rate is higher then this threshold,then the ONT will exit power reduction state if it is bound to power reduction profile and meets other conditions. The valid value range is 2--100pps The default value is 10pps | ||||
| ChwXponDeviceOntPowerReductionDownstreamExitBurstRate | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the downstream burst rate threshold that ONT needs to exit power reduction state. during exit-interval time,if its downstream burst rate is higher then this threshold,then the ONT will exit power reduction state if it is bound to power reduction profile and meets other conditions. The valid value range is 2--100pps The default value is 10pps | ||||
| ChwXponDeviceOntPowerReductionTimeRange | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the time range that the ONT can be in power reduction state,in the specific time range,if the ONT meets the conditions need to enter power reduction state, it will perform power reduction function.other leaves following this leaf are used to specify this time range. Options: 1.all(1) -the whole time range from 00 :00 to 24:00 every day. 2.specific(2) -specific time range. The default value is all (1).
| ||||
| ChwXponDeviceOntPowerReductionEnableDayofWeek | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.15 | Integer32 | RW | |
column · Integer32 · read-write · current The values are as follows: Sunday: 0x01 Monday: 0x02 Tuesday: 0x04 Wednesday: 0x08 Thursday: 0x10 Friday: 0x20 Saturday: 0x40 If the value is set to Sunday and Monday, perform the | operation to the values of Sunday and Monday, and the value is 0x03, and so on. | ||||
| ChwXponDeviceOntPowerReductionStartTime | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.16 | OCTET STRING (SIZE (2)) | RW | |
column · OCTET STRING (SIZE (2)) · read-write · current Indicates the start time of a periodic time range,example:0x08 0x1E means 08:30 | ||||
| ChwXponDeviceOntPowerReductionEndTime | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.17 | OCTET STRING (SIZE (2)) | RW | |
column · OCTET STRING (SIZE (2)) · read-write · current Indicates the end time of a periodic time range,example:0x08 0x1E means 08:30 | ||||
| ChwXponDeviceOntPowerReductionProfileRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.6.1.18 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponDeviceOntPowerReductionProfileRowStatus is used to create a new row or to modify or to delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntEthPortPoeConfigTable | 1.3.6.1.4.1.2011.6.145.1.1.5.7 | NA | ||
table · not-accessible · current This table is used to set the PoE configuration of the ONT Ethernet port. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntEthPortId. | ||||
| RhwXponOntEthPortPoeConfigEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.7.1 | NA | ||
row · not-accessible · current This table is used to set the PoE configuration of the ONT Ethernet port. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntEthPortId. | ||||
| ChwXponOntEthPortId | 1.3.6.1.4.1.2011.6.145.1.1.5.7.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current ONT ETH port ID. | ||||
| ChwXponOntEthPortPoeSwitch | 1.3.6.1.4.1.2011.6.145.1.1.5.7.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the power supply switch of the ONT Ethernet port. Options: 1. enable(1) - Indicates that the power supply switch of the ONT Ethernet port is enabled. 2. disable(2) - Indicates that the power supply switch of the ONT Ethernet port is disabled. 3. unconcern(3) - Indicates that the power supply switch of the ONT Ethernet port is unconcerned. The default value is unconcern(3).
| ||||
| ChwXponOntEthPortPoeMode | 1.3.6.1.4.1.2011.6.145.1.1.5.7.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the power supply mode of the ONT Ethernet port.
Options:
1. signal(1) - Indicates that the power supply mode of the ONT Ethernet port is the signal line pair.
2. spare(2) - Indicates that the power supply mode of the ONT Ethernet port is the spare line pair.
3. unconcern(255) - Indicates that the power supply mode of the ONT Ethernet port is unconcerned.
The default value is signal(1).
| ||||
| ChwXponOntEthPortPoePriority | 1.3.6.1.4.1.2011.6.145.1.1.5.7.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the power supply priority of the ONT Ethernet port. Options: 1. critical(1) - Indicates that the power supply of the ONT Ethernet port is of the highest priority. 2. high(2) - Indicates that the power supply priority of the ONT Ethernet port is high. 3. low(3) - Indicates that the power supply priority of the ONT Ethernet port is low. The default value is high(2).
| ||||
| ChwXponOntEthPortPoePowerClass | 1.3.6.1.4.1.2011.6.145.1.1.5.7.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the power supply classification of the ONT Ethernet port.
Options:
1. default(1) - Indicates the default power supply classification of the ONT Ethernet port according to the classification of the PD.
2. class0(2) - Indicates the power supply classification of the ONT Ethernet port is class0.
3. class1(3) - Indicates the power supply classification of the ONT Ethernet port is class1.
4. class2(4) - Indicates the power supply classification of the ONT Ethernet port is class2.
5. class3(5) - Indicates the power supply classification of the ONT Ethernet port is class3.
6. class4(6) - Indicates the power supply classification of the ONT Ethernet port is class4.
7. invalid(-1) - Indicates the power supply classification of the ONT Ethernet port is invalid.
The default value is default(1).
| ||||
| ChwXponOntEthPortPoeMaxPowerValue | 1.3.6.1.4.1.2011.6.145.1.1.5.7.1.6 | Integer32 (-1 | 100..65535) | RW | |
column · Integer32 (-1 | 100..65535) · read-write · current This object indicates the max power of the ONT Ethernet port, the unit is 10mW. The invalid value is -1. | ||||
| ChwXponOntEthPortPoeForcePowerSwitch | 1.3.6.1.4.1.2011.6.145.1.1.5.7.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the force power switch of the ONT Ethernet port.
Options:
1. disable(1) - Indicates that the force power switch of the ONT Ethernet port is disabled.
2. enable(2) - Indicates that the force power switch of the ONT Ethernet port is enabled.
3. invalid(-1) - Indicates that the force power switch of the ONT Ethernet port is invalid.
The default value is disable(1).
| ||||
| ThwXponOntEthPortPoeStatusTable | 1.3.6.1.4.1.2011.6.145.1.1.5.8 | NA | ||
table · not-accessible · current This table is used to query the PoE stauts of the ONT Ethernet port. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntEthPortId. | ||||
| RhwXponOntEthPortPoeStatusEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1 | NA | ||
row · not-accessible · current This table is used to query the PoE stauts of the ONT Ethernet port. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntEthPortId. | ||||
| ChwXponOntEthPortPoePowerSupplyCapability | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the power supply capability of the ONT Ethernet port. Options: 1. capable(1) - Indicates that the ONT Ethernet port can supply power to the PD. 2. incapable(2) - Indicates that the ONT Ethernet port can not supply power to the PD. 3. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntEthPortPoePowerDetectionStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the power detection status of the ONT Ethernet port. Options: 1. noneed(1) - Indicates that the ONT Ethernet port does not need to supply power to the PD. 2. searching(2) - Indicates that the ONT Ethernet port is in the power supply searching state. 3. delivering(3) - Indicates that the ONT Ethernet port is in the power supply delivering state. 4. forced(4) - Indicates that the ONT Ethernet port is in the forced power supply state. 5. fault(5) - Indicates that the ONT Ethernet port is in the forced power supply failure state. 6. specificFault(6) - Indicates that the ONT Ethernet port is in the power supply failure state because the PD does not meet the current power supply conditions. 7. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntEthPortPoePowerClassificationStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the power supply classification of the ONT Ethernet port. Options: 1. undefined(1) - Indicates that the actual power classification of the PD is undefined or the PD does not support the feature. 2. class0(2) - Indicates that the actual power classification of the PD is class 0. 3. class1(3) - Indicates that the actual power classification of the PD is class 1. 4. class2(4) - Indicates that the actual power classification of the PD is class 2. 5. class3(5) - Indicates that the actual power classification of the PD is class 3. 6. class4(6) - Indicates that the actual power classification of the PD is class 4. 7. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntEthPortPoeInvalidSignatureCounter | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the invalid signature statistics of the ONT Ethernet port. | ||||
| ChwXponOntEthPortPoePowerDeniedCounter | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the statistics of the ONT Ethernet port which refused to supply power to the PD. | ||||
| ChwXponOntEthPortPoeOverloadCounter | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the power overload statistics of ONT Ethernet port. | ||||
| ChwXponOntEthPortPoeShortCounter | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the current overload statistics of the ONT Ethernet port. | ||||
| ChwXponOntEthPortPoeMpsAbsentCounter | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the disconnected statistics of the ONT Ethernet port. | ||||
| ChwXponOntEthPortPoeStatusOutPutPowerCurrentValue | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current power of the ONT Ethernet port. The unit is mW. | ||||
| ChwXponOntEthPortPoeStatusOutPutPowerAverageValue | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the average power of the ONT Ethernet port. The unit is mW. | ||||
| ChwXponOntEthPortPoeStatusOutPutPowerPeakValue | 1.3.6.1.4.1.2011.6.145.1.1.5.8.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the peek power of the ONT Ethernet port. The unit is mW. | ||||
| ThwXponTrafficAlarmProfileTable | 1.3.6.1.4.1.2011.6.145.1.1.5.9 | NA | ||
table · not-accessible · current This is the traffic alarm profile infomation table. The index of this table is hwXponTrafficAlarmProfileNameIndex. | ||||
| RhwXponTrafficAlarmProfileEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1 | NA | ||
row · not-accessible · current This is the traffic alarm profile infomation table. The index of this entry is hwXponTrafficAlarmProfileNameIndex. | ||||
| ChwXponTrafficAlarmProfileNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the traffic alarm profile name index. | ||||
| ChwXponTrafficAlarmProfileBindNum | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the traffic alarm profile binding times. | ||||
| ChwXponTrafficAlarmProfileDetectInterval | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.3 | Integer32 (1..300) | RW | |
column · Integer32 (1..300) · read-write · current This object indicates the traffic congestion detection interval. It is defined as an 32-bit integer whose unit is 's'(second) | ||||
| ChwXponTrafficAlarmProfileDetectTimes | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.4 | Integer32 (1..900) | RW | |
column · Integer32 (1..900) · read-write · current This object indicates the traffic congestion detection times. | ||||
| ChwXponTrafficAlarmProfileAlarmDetectTimes | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.5 | Integer32 (0..900) | RW | |
column · Integer32 (0..900) · read-write · current This object indicates the alarm threshold of the congestion detection. | ||||
| ChwXponTrafficAlarmProfileWarningDetectTimes | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.6 | Integer32 (0..900) | RW | |
column · Integer32 (0..900) · read-write · current This object indicates the warning threshold of the congestion detection. | ||||
| ChwXponTrafficAlarmProfileUpRatioThreshold | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.7 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current This object indicates the ratio of upstream congestion threshold. | ||||
| ChwXponTrafficAlarmProfileDownRatioThreshold | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.8 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current This object indicates the ratio of downstream congestion threshold. | ||||
| ChwXponTrafficAlarmProfileRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.9.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponTrafficAlarmProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntWanProfileTable | 1.3.6.1.4.1.2011.6.145.1.1.5.10 | NA | ||
table · not-accessible · current This is the ONT wan profile infomation table. The index of this table is hwXponOntWanProfileNameIndex. | ||||
| RhwXponOntWanProfileEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.10.1 | NA | ||
row · not-accessible · current This is the ONT wan profile infomation table. The index of this entry is hwXponOntWanProfileNameIndex. | ||||
| ChwXponOntWanProfileNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.10.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the ont wan profile name index. | ||||
| ChwXponOntWanProfileBindNum | 1.3.6.1.4.1.2011.6.145.1.1.5.10.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of ont bound with wan profile. | ||||
| ChwXponOntWanProfileConnectionType | 1.3.6.1.4.1.2011.6.145.1.1.5.10.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the connection type of ONT wan. Options: 1. route(1) - Indicates that the connection type of ont wan is route. 2. bridge(2) - Indicates that the connection type of ont wan is bridge. The default value is route(1).
| ||||
| ChwXponOntWanProfileNatSwitch | 1.3.6.1.4.1.2011.6.145.1.1.5.10.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the NAT switch of ont wan. Options: 1. enable(1) - Indicates that the NAT switch of ont wan is enable. 2. disable(2) - Indicates that the NAT switch of ont wan is disable. The default value is disable(2).
| ||||
| ChwXponOntWanProfileRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.10.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponOntWanProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntPolicyRouteProfileTable | 1.3.6.1.4.1.2011.6.145.1.1.5.11 | NA | ||
table · not-accessible · current This is the ont policy route profile infomation table. The index of this table is hwXponOntPolicyRouteProfileNameIndex. | ||||
| RhwXponOntPolicyRouteProfileEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.11.1 | NA | ||
row · not-accessible · current This is the ont policy route profile infomation table. The index of this entry is hwXponOntPolicyRouteProfileNameIndex. | ||||
| ChwXponOntPolicyRouteProfileNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.11.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the ont policy route profile index. | ||||
| ChwXponOntPolicyRouteProfileBindNum | 1.3.6.1.4.1.2011.6.145.1.1.5.11.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of ont bound with policy route profile. | ||||
| ChwXponOntPolicyRouteProfileRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.11.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponOntPolicyRouteProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntPolicyRouteProfilePortCfgTable | 1.3.6.1.4.1.2011.6.145.1.1.5.12 | NA | ||
table · not-accessible · current This is the ont policy route profile port configuration infomation table. The index of this table is hwXponOntPolicyRouteProfilePortCfgProfNameIndex. | ||||
| RhwXponOntPolicyRouteProfilePortCfgEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.12.1 | NA | ||
row · not-accessible · current This is the ont policy route profile port configuration infomation table. The index of this entry is hwXponOntPolicyRouteProfilePortCfgProfNameIndex. | ||||
| ChwXponOntPolicyRouteProfilePortCfgProfNameIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.12.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object indicates the ont policy route profile index. | ||||
| ChwXponOntPolicyRouteProfilePortCfgIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.12.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the policy route rule index. | ||||
| ChwXponOntPolicyRouteProfilePortCfgWanIndex | 1.3.6.1.4.1.2011.6.145.1.1.5.12.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the index of wan appointed by ont policy route. | ||||
| ChwXponOntPolicyRouteProfilePortCfgEthPortBitMap | 1.3.6.1.4.1.2011.6.145.1.1.5.12.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the mask of ethport using the policy route rule. | ||||
| ChwXponOntPolicyRouteProfilePortCfgWlanPortBitMap | 1.3.6.1.4.1.2011.6.145.1.1.5.12.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current This object indicates the mask of wan using the policy route rule. | ||||
| ChwXponOntPolicyRouteProfilePortCfgRowStatus | 1.3.6.1.4.1.2011.6.145.1.1.5.12.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The hwXponOntPolicyRouteProfilePortCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row | ||||
| ThwXponOntEthernetPortOpticalStaticInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.5.13 | NA | ||
table · not-accessible · current This table is the ont ethernet port optical static infomation. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntEthPortId. | ||||
| RhwXponOntEthernetPortOpticalStaticInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1 | NA | ||
row · not-accessible · current This table is the ont ethernet port optical static infomation. The indexes of this entry are ifIndex hwXponOntIndex and hwXponOntEthPortId. | ||||
| ChwXponOntEthernetPortOpticalIdentifier | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the identifier of optical module.
Options:
1. unknown(1) -unknown the identifier of optical module
2. gbic(2) -the identifier of optical module is gbic
3. solderedToMotherboard(3) -the identifier of optical module is solderedToMotherboard
4. sfp(4) -the identifier of optical module is sfp
5. pin300XBI(5) -the identifier of optical module is pin300XBI
6. xenpak(6) -the identifier of optical module is xenpak
7. xfp(7) -the identifier of optical module is xfp
8. xff(8) -the identifier of optical module is xff
9. xfpe(9) -the identifier of optical module is xfpe
10. xpak(10) -the identifier of optical module is xpak
11. x2(11) -the identifier of optical module is x2
12. dwdmSfp(12) -the identifier of optical module is DWDM-SFP
13. qSfp(13) -the identifier of optical module is QSFP
14. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntEthernetPortOpticalExtID | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the extended type of optical module.
Options:
1. notSpecifiedOrNotCompliant(1) -the extended type of optical module is notSpecifiedOrNotCompliant
2. moddef1(2) -the extended type of optical module is moddef1
3. moddef2(3) -the extended type of optical module is moddef2
4. moddef3(4) -the extended type of optical module is moddef3
5. bySerialIDOnly(5) -the extended type of optical module is bySerialIDOnly
6. moddef5(6) -the extended type of optical module is moddef5
7. moddef6(7) -the extended type of optical module is moddef6
8. moddef7(8) -the extended type of optical module is moddef7
9. invalid(-1) - Indicates that the query fails or no information is detected.
| ||||
| ChwXponOntEthernetPortOpticalConnector | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the type of optical module connector.
Options:
1. unknown(1) -unknown the type of optical module connector.
2. sc(2) -the type of optical module connector is sc.
3. copperConnector1(3) -the type of optical module connector is copperConnector1.
4. copperConnector2(4) -the type of optical module connector is copperConnector2.
5. bnctnc(5) -the type of optical module connector is bnctnc.
6. coaxialHeaders(6) -the type of optical module connector is coaxialHeaders.
7. fiberJack(7) -the type of optical module connector is fiberJack.
8. lc(8) -the type of optical module connector is lc.
9. mtrj(9) -the type of optical module connector is mtrj.
10. mu(10) -the type of optical module connector is mu.
11. sg(11) -the type of optical module connector is sg.
12. opticalPigtail(12) -the type of optical module connector is opticalPigtail.
13. hssdcii(13) -the type of optical module connector is hssdcii.
14. copperPigtail(14) -the type of optical module connector is copperPigtail.
15. vendorSpecific(15) -the type of optical module connector is vendorSpecific.
16. mpoParallelOptic(16) -the type of optical module connector is mpo parallel optic.
17. rj45(17) -the type of optical module connector is RJ45.
18. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalVendorName | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.4 | OCTET STRING (SIZE (0..17)) | RO | |
column · OCTET STRING (SIZE (0..17)) · read-only · current Indicate the vendor name of a optical module. | ||||
| ChwXponOntEthernetPortOpticalVendorRev | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.5 | OCTET STRING (SIZE (0..5)) | RO | |
column · OCTET STRING (SIZE (0..5)) · read-only · current Indicate the revision level for part number provided by vendor. | ||||
| ChwXponOntEthernetPortOpticalVendorPN | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.6 | OCTET STRING (SIZE (0..17)) | RO | |
column · OCTET STRING (SIZE (0..17)) · read-only · current Indicate the part number of a optical module provided by vendor. | ||||
| ChwXponOntEthernetPortOpticalVendorSN | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.7 | OCTET STRING (SIZE (0..17)) | RO | |
column · OCTET STRING (SIZE (0..17)) · read-only · current The serial number of a optical module provided by vendor. | ||||
| ChwXponOntEthernetPortOpticalDateCode | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.8 | OCTET STRING (SIZE (0..9)) | RO | |
column · OCTET STRING (SIZE (0..9)) · read-only · current The date code of a optical module. | ||||
| ChwXponOntEthernetPortOpticalSFF8472Compliance | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the SFF-8472 standard.
Options:
1. undefined(1) -not included or undefined.
2. includesSFF8472V93(2) -includes functionality described in SFF-8472 Rev 9.3.
3. includesSFF8472V95(3) -includes functionality described in SFF-8472 Rev 9.5.
4. includesSFF8472V102(4) -includes functionality described in SFF-8472 Rev 10.2.
5. includesSFF8472V104(5) -includes functionality described in SFF-8472 Rev 10.4.
6. includesSFF8472V110(6) -includes functionality described in SFF-8472 Rev 11.0.
7. invalid(-1) -Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOptical10GEComplianceCodes | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the 10G ethernet transceiver type.
Options:
1. en10GBASELRM(1) -Ethernet transceiver type is 10GBASE-LRM
2. en10GBASELR(2) -Ethernet transceiver type is 10GBASE-LR
3. en10GBASESR(3) -Ethernet transceiver type is 10GBASE-SR
4. en10GBASEER(4) -Ethernet transceiver type is 10GBASE-ER
5. invalid(-1) -Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalGEComplianceCodes | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the 1G ethernet transceiver type.
Options:
1. en1000BASET(1) -Ethernet transceiver type is 1000BASE-T
2. en1000BASECX(2) -Ethernet transceiver type is 1000BASE-CX
3. en1000BASELX(3) -Ethernet transceiver type is 1000BASE-LX
4. en1000BASESX(4) -Ethernet transceiver type is 1000BASE-SX
5. enMULTILX(5) -Ethernet transceiver type is 100BASE-LX&1000BASE-LX
6. en100BASELX(6) -Ethernet transceiver type is 100BASE-LX
7. en100BASEFX(7) -Ethernet transceiver type is 100BASE-FX
8. en1000BASEBX(8) -Ethernet transceiver type is 1000BASE-BX
9. en1000BASEPX(9) -Ethernet transceiver type is 1000BASE-PX
10. en100BASEBX(10) -Ethernet transceiver type is 100BASE-BX
11. en1000BASEZX(11) -Ethernet transceiver type is 1000BASE-ZX
12. invalid(-1) -Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalSpeed | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the fibre Channel speed.
Options:
1. speed400MBytesPerSec(1) -fibre channel speed is 400 MBytes/s
2. speed200MBytesPerSec(2) -fibre channel speed is 200 MBytes/s
3. speed100MBytesPerSec(3) -fibre channel speed is 100 MBytes/s
4. speed800MBytesPerSec(4) -fibre channel speed is 800 MBytes/s
5. speed1200MBytesPerSec(5) -fibre channel speed is 1200 MBytes/s
6. speed1600MBytesPerSec(6) -fibre channel speed is 1600 MBytes/s
7. invalid(-1) -Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalLength9Micronkm | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Indicate the link length that is supported by the transceiver while operating in compliance
with the applicable standards using 9 micron Single-mode Fiber.
0-255: The maximum value is 255, which means that the transceiver supports a link length
greater than 254 km. Unit: km
Invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalLength9Micron | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Indicate the link length that is supported by the transceiver while operating in compliance with the applicable standards using 9 micron Single-mode Fiber. 0~255:The maximum value is 255, which means that the transceiver supports a link length greater than 25.4 km. Unit: 1m Invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalLength50Micron | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 50 micron multi-mode OM2 [500MHz*km]
fiber.
0~255:The maximum value is 255, which means that the transceiver supports a link
length greater than 2.54 km. Unit: 10m
Invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalLength62Micron5 | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Indicate link length that is supported by the transceiver while operating in compliance with applicable standards using 62.5 micron multi-mode OM1 [200 MHz*km] fiber. 0~255: The maximum value is 255, which means that the transceiver supports a link length greater than 2.54 km. Unit: 10m Invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalLengthCopper | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current Indicate Link length supported for copper. Unit: 1m Invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalWaveLength | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The laser wavelength. Unit: 1nm Invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalBrNominal | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current Indicate Nominal bit rate. Unit: 100 MBits/sec Invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ChwXponOntEthernetPortOpticalBrMax | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current The upper bit rate margin. Invalid(-1) - Indicates that the query fails or no information is detected | ||||
| ChwXponOntEthernetPortOpticalBrMin | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current The lower bit rate margin. Invalid(-1) - Indicates that the query fails or no information is detected | ||||
| ChwXponOntEthernetPortOpticalCcBase | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The check code for the base ID fields. Invalid(-1) - Indicates that the query fails or no information is detected | ||||
| ChwXponOntEthernetPortOpticalCcExt | 1.3.6.1.4.1.2011.6.145.1.1.5.13.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current The check code for the extended ID fields. Invalid(-1) - Indicates that the query fails or no information is detected | ||||
| ThwXponOntEthernetPortOpticalDdmInfoTable | 1.3.6.1.4.1.2011.6.145.1.1.5.14 | NA | ||
table · not-accessible · current This table is the ont ethernet port optical Ddm infomation. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntEthPortId. | ||||
| RhwXponOntEthernetPortOpticalDdmInfoEntry | 1.3.6.1.4.1.2011.6.145.1.1.5.14.1 | NA | ||
row · not-accessible · current This table is the ont ethernet port optical Ddm infomation. The indexes of this entry are ifIndex hwXponOntIndex and hwXponOntEthPortId. | ||||
| ChwXponOntEthernetPortOpticalDdmTemperature | 1.3.6.1.4.1.2011.6.145.1.1.5.14.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The temperature of the optical module. Unit: unit C(centigrade)
| ||||
| ChwXponOntEthernetPortOpticalDdmBiasCurrent | 1.3.6.1.4.1.2011.6.145.1.1.5.14.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The Bias Current of the optical module. Unit: mA
| ||||
| ChwXponOntEthernetPortOpticalDdmTxPower | 1.3.6.1.4.1.2011.6.145.1.1.5.14.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The transmitting power of the optical module. Unit: 0.01dBm
| ||||
| ChwXponOntEthernetPortOpticalDdmRxPower | 1.3.6.1.4.1.2011.6.145.1.1.5.14.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The receiving power of the optical module. Unit: 0.01dBm
| ||||
| ChwXponOntEthernetPortOpticalDdmVoltage | 1.3.6.1.4.1.2011.6.145.1.1.5.14.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The power feed voltage of the optical module. Unit: mV
| ||||
| NhwEponDeviceCommonGlobalObjects | 1.3.6.1.4.1.2011.6.145.1.1.6 | |||
| ShwEponInteroperModeGlobalStandard | 1.3.6.1.4.1.2011.6.145.1.1.6.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch mode of epon ont interoperability. Options: 1. ctc(1) - The mode standard of epon ont interoperability is ctc 2. cuc(2) - The mode standard of epon ont interoperability is cuc
| ||||
| ShwEponInteroperModeGlobalActiveMode | 1.3.6.1.4.1.2011.6.145.1.1.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The active mode of epon ONT interoperability mode. Options: 1. immediate(1) - Indicates that the epon ONT takes effect immediately 2. nextStartup(2) - Indicates that the epon ONT takes effect after next startup 3. invalid(-1) - Indicates that the query fails or no information is detected
| ||||
| ShwEponInteroperModeGlobalStandardVersion | 1.3.6.1.4.1.2011.6.145.1.1.6.3 | Integer32 (0..254) | RW | |
scalar · Integer32 (0..254) · read-write · current This object indicates the oui version of epon ONT interoperability. 0 indicates that the oui version of epon ONT interoperability is not specified. 0x21 indicates that the oui version of epon ONT interoperability 2.1. | ||||