HUAWEI-WLAN-CAPWAP-MIB
HUAWEI Technology Co.,LtdModify hwWlanCapwapDtlsSwitch.
snmptranslate -m HUAWEI-WLAN-CAPWAP-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-WLAN-CAPWAP-MIB <host> 1.3.6.1.4.1.2011.6.139.9Imports
| HUAWEI-WLAN-MIB | hwWlan |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwWlanCapwap | 1.3.6.1.4.1.2011.6.139.9 | |||
identity Modify hwWlanCapwapDtlsSwitch. | ||||
| NhwWlanCapwapSourceInterface | 1.3.6.1.4.1.2011.6.139.9.1 | |||
| ShwWlanCapwapSourceInterfaceValue | 1.3.6.1.4.1.2011.6.139.9.1.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object indicates the interface number when hwWlanCapwapSourceInterfaceMethod is set to vlanif(2) or loopback(3). | ||||
| ShwWlanCapwapSourceInterfaceMethod | 1.3.6.1.4.1.2011.6.139.9.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current operation method of capwap source interface.It can be set default(1): use default setting vlanif(2): use vlanif interface loopback(3): use loopback interface ipaddress(4):user ip address
| ||||
| ShwWlanCapwapSourceIPv4Address | 1.3.6.1.4.1.2011.6.139.9.1.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current If hwWlanCapwapSourceInterfaceMethod is set to ipaddress(4), this object is used to identify the IP address of the source port. | ||||
| ShwWlanCapwapSourceIPv6Address | 1.3.6.1.4.1.2011.6.139.9.1.4 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current If hwWlanCapwapSourceInterfaceMethod is set to ipaddress(6), this object is used to identify the IP address of the source port. | ||||
| NhwWlanCapwapSysPara | 1.3.6.1.4.1.2011.6.139.9.2 | |||
| ShwWlanCapwapDtlsSwitch | 1.3.6.1.4.1.2011.6.139.9.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the status of the global DTLS function. The default value is 3.
| ||||
| ShwWlanCapwapDtlsPsk | 1.3.6.1.4.1.2011.6.139.9.2.2 | OCTET STRING (SIZE (6..32)) | RW | |
scalar · OCTET STRING (SIZE (6..32)) · read-write · current This object indicates the global DTLS PSK value. In V200R021C00SPC100 and later version, the size range changes to 8~32. | ||||
| ShwWlanCapwapDtlsDefaultPskSwitch | 1.3.6.1.4.1.2011.6.139.9.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates whether the global DtlsDefaultPsk function is enabled. The default value is 2.
| ||||
| ShwWlanCapwapIpv6Enable | 1.3.6.1.4.1.2011.6.139.9.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Work mode of capwap source. It can be set ipv4(1): capwap source just can be configed to ipv4 source. ipv6(2): capwap source just can be configed to ipv6 source. doubleStack(3): capwap source can be configed to ipv4 and ipv6 source at the same time.
| ||||
| ShwWlanCapwapInterControllerDtlsEncrpyt | 1.3.6.1.4.1.2011.6.139.9.2.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates whether the DTLS function is enabled between ACs. The default value is 3.
| ||||
| ShwWlanCapwapInterControllerDtlsPsk | 1.3.6.1.4.1.2011.6.139.9.2.6 | OCTET STRING (SIZE (6..32)) | RW | |
scalar · OCTET STRING (SIZE (6..32)) · read-write · current This object indicates the DTLS PSK used between ACs. In V200R021C00SPC100 and later version, the size range changes to 8~32. | ||||
| ShwCapwapEchoInterval | 1.3.6.1.4.1.2011.6.139.9.2.7 | Integer32 (2..300) | RW | |
scalar · Integer32 (2..300) · read-write · current This object indicates the interval for sending Echo packets in a CAPWAP tunnel. | ||||
| ShwCapwapEchoTimes | 1.3.6.1.4.1.2011.6.139.9.2.8 | Integer32 (2..120) | RW | |
scalar · Integer32 (2..120) · read-write · current This object indicates the maximum number of Echo packet timeouts in a CAPWAP tunnel. | ||||
| ShwWlanCapwapControlPriorityLocal | 1.3.6.1.4.1.2011.6.139.9.2.9 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current This object indicates the priority of CAPWAP control packets sent by ACs to APs. | ||||
| ShwWlanCapwapControlPriorityRemote | 1.3.6.1.4.1.2011.6.139.9.2.10 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current This object indicates the priority of CAPWAP control packets sent by APs to ACs. | ||||
| ShwWlanCapwapSensitiveInfoPsk | 1.3.6.1.4.1.2011.6.139.9.2.11 | OCTET STRING (SIZE (6..32)) | RW | |
scalar · OCTET STRING (SIZE (6..32)) · read-write · current This object indicates the PSK used for encrypting sensitive information between ACs and APs. | ||||
| ShwWlanCapwapInterControllerSensitiveInfoPsk | 1.3.6.1.4.1.2011.6.139.9.2.12 | OCTET STRING (SIZE (6..32)) | RW | |
scalar · OCTET STRING (SIZE (6..32)) · read-write · current This object indicates the PSK used for encrypting sensitive information between ACs. | ||||
| ShwWlanCapwapMessageIntegrityPsk | 1.3.6.1.4.1.2011.6.139.9.2.13 | OCTET STRING (SIZE (6..32)) | RW | |
scalar · OCTET STRING (SIZE (6..32)) · read-write · current This object indicates the PSK for checking integrity of CAPWAP packets between ACs and APs. | ||||
| ShwWlanCapwapInterControllerMessageIntegrityPsk | 1.3.6.1.4.1.2011.6.139.9.2.14 | OCTET STRING (SIZE (6..32)) | RW | |
scalar · OCTET STRING (SIZE (6..32)) · read-write · current The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device. | ||||
| ShwWlanCapwapMessageIntegrityPskMandatoryMatchSwitch | 1.3.6.1.4.1.2011.6.139.9.2.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
| ||||
| ShwWlanCapwapMsgCheckSwitch | 1.3.6.1.4.1.2011.6.139.9.2.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates whether the CAPWAP packet check function is enabled between ACs and APs. The value 1 indicates that this function is disabled, and the value 2 indicates that this function is enabled.
| ||||
| ShwWlanCapwapInterControllerMsgCheckSwitch | 1.3.6.1.4.1.2011.6.139.9.2.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
| ||||
| ShwWlanCapwapDtlsDataSwitch | 1.3.6.1.4.1.2011.6.139.9.2.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the status of the global DTLS function of data-link. The default value is 1: disable.
| ||||
| ShwWlanCapwapInterControllerDtlsDataSwitch | 1.3.6.1.4.1.2011.6.139.9.2.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the status of the inter-controller DTLS function of data-link. The default value is 1: disable.
| ||||
| ShwWlanCapwapDtlsDefaultCertSwitch | 1.3.6.1.4.1.2011.6.139.9.2.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates whether the global default cert function for CAPWAP DTLS is enabled. The default value is 2.
| ||||
| ShwWlanCapwapDtlsNoAuthSwitch | 1.3.6.1.4.1.2011.6.139.9.2.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates whether the no auth function for CAPWAP DTLS is enabled. The default value is 1.
| ||||
| ShwWlanCapwapDtlsVersion1Dot0Switch | 1.3.6.1.4.1.2011.6.139.9.2.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates whether the version1.0 of CAPWAP DTLS is enabled. The default value is 1.
| ||||
| ShwWlanCapwapDtlsCbcSwitch | 1.3.6.1.4.1.2011.6.139.9.2.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates whether cbc support for CAPWAP DTLS is enabled. The default value is 1.
| ||||
| ShwWlanCapwapControlMtu | 1.3.6.1.4.1.2011.6.139.9.2.24 | Integer32 (1000..1700) | RW | |
scalar · Integer32 (1000..1700) · read-write · current This object indicates the MTU for sending control packets in a CAPWAP tunnel. The default value is 1500. | ||||
| NhwWlanCapwapSource | 1.3.6.1.4.1.2011.6.139.9.3 | |||
| ThwWlanCapwapSourceTable | 1.3.6.1.4.1.2011.6.139.9.3.1 | NA | ||
table · not-accessible · current Description. | ||||
| RhwWlanCapwapSourceEntry | 1.3.6.1.4.1.2011.6.139.9.3.1.1 | NA | ||
| ChwWlanCapwapSourceIndex | 1.3.6.1.4.1.2011.6.139.9.3.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current the index of capwap source interface. | ||||
| ChwWlanCapwapSourceMethod | 1.3.6.1.4.1.2011.6.139.9.3.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Operation method of capwap source interface.It can be set vlanif(2): use vlanif interface loopback(3): use loopback interface ipv4Address(4): use ipv4 adddress ipv6Address(5): use ipv6 address.
| ||||
| ChwWlanCapwapSourceValue | 1.3.6.1.4.1.2011.6.139.9.3.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current the value of capwap source interface. | ||||
| ChwWlanCapwapSourceRowStatus | 1.3.6.1.4.1.2011.6.139.9.3.1.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current Row status: mainly to support to add or delete the relationship of the interface and the capwap-source.
createAndGo(4): add a relationship.
destroy(6): delete the relationship. | ||||
| ChwWlanCapwapSourceIPv4 | 1.3.6.1.4.1.2011.6.139.9.3.1.1.5 | IpAddress | RW | |
column · IpAddress · read-write · current This object indicates the value of capwap source ipv4 address. | ||||
| ChwWlanCapwapSourceIPv6 | 1.3.6.1.4.1.2011.6.139.9.3.1.1.6 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This object indicates the value of capwap source ipv6 address. | ||||
| NhwWlanCapwapConformance | 1.3.6.1.4.1.2011.6.139.9.4 | |||
| NhwWlanCapwapCompliances | 1.3.6.1.4.1.2011.6.139.9.4.1 | |||
| MhwWlanCapwapCompliance | 1.3.6.1.4.1.2011.6.139.9.4.1.1 | |||
| NhwWlanCapwapObjectGroups | 1.3.6.1.4.1.2011.6.139.9.4.2 | |||
| GhwWlanCapwapSourceInterfaceGroup | 1.3.6.1.4.1.2011.6.139.9.4.2.1 | |||
group · current Description. | ||||
| GhwWlanCapwapSysParaGroup | 1.3.6.1.4.1.2011.6.139.9.4.2.2 | |||
group · current Description.
| ||||
| GhwWlanCapwapSourceGroup | 1.3.6.1.4.1.2011.6.139.9.4.2.3 | |||
group · current Description. | ||||
| NhwWlanCapwapTrapInfo | 1.3.6.1.4.1.2011.6.139.9.5 | |||
| NhwWlanCapwapTrap | 1.3.6.1.4.1.2011.6.139.9.5.1 | |||
| !hwCapwapSensitiveInfoPskHsbMismatchTrap | 1.3.6.1.4.1.2011.6.139.9.5.1.1 | |||
notification · current PSKs for encrypting CAPWAP sensitive information are inconsistent on the active and standby ACs. | ||||
| !hwCapwapSensitiveInfoPskHsbMismatchRestoreTrap | 1.3.6.1.4.1.2011.6.139.9.5.1.2 | |||
notification · current PSKs for encrypting CAPWAP sensitive information become consistent on the active and standby ACs. | ||||
| !hwCapwapInterControllerSensitiveInfoPskHsbMismatchTrap | 1.3.6.1.4.1.2011.6.139.9.5.1.3 | |||
notification · current PSKs for encrypting inter-AC CAPWAP sensitive information are inconsistent on the active and standby ACs. | ||||
| !hwCapwapInterControllerSensitiveInfoPskHsbMismatchRestoreTrap | 1.3.6.1.4.1.2011.6.139.9.5.1.4 | |||
notification · current PSKs for encrypting inter-AC CAPWAP sensitive information become consistent on the active and standby ACs. | ||||
| !hwCapwapExistEarlyVersionDtlsLinkTrap | 1.3.6.1.4.1.2011.6.139.9.5.1.5 | |||
notification · current The DTLS link of an earlier version exists. | ||||
| !hwCapwapExistEarlyVersionDtlsLinkTrapRestore | 1.3.6.1.4.1.2011.6.139.9.5.1.6 | |||
notification · current The alarm of early version dtls link is cleared. | ||||
| !hwCapwapSecurityParaNotSetTrap | 1.3.6.1.4.1.2011.6.139.9.5.1.7 | |||
| !hwCapwapSecurityParaNotSetTrapRestore | 1.3.6.1.4.1.2011.6.139.9.5.1.8 | |||
notification · current The alarm indicating no CAPWAP security parameter setting is cleared.
| ||||
| NhwWlanCapwapTrapObjects | 1.3.6.1.4.1.2011.6.139.9.5.2 | |||
| ShwWlanCapwapLinkPeerIP | 1.3.6.1.4.1.2011.6.139.9.5.2.1 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current This object indicates the peer IP address of capwap link. | ||||
| ShwWlanCapwapLinkPeerPort | 1.3.6.1.4.1.2011.6.139.9.5.2.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object indicates the peer port of capwap link. | ||||
| ShwWlanCapwapLinkLocalIP | 1.3.6.1.4.1.2011.6.139.9.5.2.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current This object indicates the local IP address of capwap link. | ||||
| ShwWlanCapwapLinkLocalPort | 1.3.6.1.4.1.2011.6.139.9.5.2.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object indicates the local port of capwap link. | ||||
| ShwWlanCapwapSecurityPara | 1.3.6.1.4.1.2011.6.139.9.5.2.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current This object indicates the info of CAPWAP security parameter. | ||||
| NhwWlanCapwapWceSyncPsk | 1.3.6.1.4.1.2011.6.139.9.6 | |||
| ShwWlanCapwapWceSyncPskApSn | 1.3.6.1.4.1.2011.6.139.9.6.1 | OCTET STRING (SIZE (1..31)) | RW | |
scalar · OCTET STRING (SIZE (1..31)) · read-write · current This object indicates Synchronize PSK by Serial Number or other ap identifier. | ||||
Traps / Notifications
- hwCapwapExistEarlyVersionDtlsLinkTrap
1.3.6.1.4.1.2011.6.139.9.5.1.5 - hwCapwapExistEarlyVersionDtlsLinkTrapRestore
1.3.6.1.4.1.2011.6.139.9.5.1.6 - hwCapwapInterControllerSensitiveInfoPskHsbMismatchRestoreTrap
1.3.6.1.4.1.2011.6.139.9.5.1.4 - hwCapwapInterControllerSensitiveInfoPskHsbMismatchTrap
1.3.6.1.4.1.2011.6.139.9.5.1.3 - hwCapwapSecurityParaNotSetTrap
1.3.6.1.4.1.2011.6.139.9.5.1.7 - hwCapwapSecurityParaNotSetTrapRestore
1.3.6.1.4.1.2011.6.139.9.5.1.8 - hwCapwapSensitiveInfoPskHsbMismatchRestoreTrap
1.3.6.1.4.1.2011.6.139.9.5.1.2 - hwCapwapSensitiveInfoPskHsbMismatchTrap
1.3.6.1.4.1.2011.6.139.9.5.1.1