HUAWEI-TAD-MIB
HUAWEI Technology Co.,LtdThe Custom damping MIB module is defined to manage the configuration under system or interface view.
snmptranslate -m HUAWEI-TAD-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-TAD-MIB <host> 1.3.6.1.4.1.2011.5.25.128Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwTAD | 1.3.6.1.4.1.2011.5.25.128 | |||
identity The Custom damping MIB module is defined to manage the configuration under system or interface view. | ||||
| NhwTADObjects | 1.3.6.1.4.1.2011.5.25.128.1 | |||
| ThwTADInterfaceTable | 1.3.6.1.4.1.2011.5.25.128.1.1 | NA | ||
table · not-accessible · current Transmission alarm damping interface configuration table. | ||||
| RhwTADInterfaceEntry | 1.3.6.1.4.1.2011.5.25.128.1.1.1 | NA | ||
row · not-accessible · current The entry of a SDH or SONET interface with damping function enabled.
| ||||
| ChwTADInterfaceIndex | 1.3.6.1.4.1.2011.5.25.128.1.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the interface. | ||||
| ChwTADFilterEnable | 1.3.6.1.4.1.2011.5.25.128.1.1.1.2 | HWEnableValue | RW | |
column · HWEnableValue · read-write · current Whether filter function is enabled. | ||||
| ChwTADFilterExpireTime | 1.3.6.1.4.1.2011.5.25.128.1.1.1.3 | Integer32 (20..10000) | RW | |
column · Integer32 (20..10000) · read-write · current How long the alarm will be postponed to process. Unit: millisecond. | ||||
| ChwTADDampingEnable | 1.3.6.1.4.1.2011.5.25.128.1.1.1.4 | HWEnableValue | RW | |
column · HWEnableValue · read-write · current Whether damping function is enabled. | ||||
| ChwTADSuppress | 1.3.6.1.4.1.2011.5.25.128.1.1.1.5 | Integer32 (2..19999) | RW | |
column · Integer32 (2..19999) · read-write · current The suppressing value. When figure-of-merit of alarm exceeds this value, this alarm will be damped. | ||||
| ChwTADCeiling | 1.3.6.1.4.1.2011.5.25.128.1.1.1.6 | Integer32 (1001..20000) | RW | |
column · Integer32 (1001..20000) · read-write · current The ceiling value. Figure-of-merit can't exceed this value. The ceiling value must be larger than suppressing value. | ||||
| ChwTADReuse | 1.3.6.1.4.1.2011.5.25.128.1.1.1.7 | Integer32 (1..19998) | RW | |
column · Integer32 (1..19998) · read-write · current The reusing value. When figure-of-merit becomes lower than this value. The alarm will be reused (exit from suppressing status). The reusing value must be less than suppressing value. | ||||
| ChwTADDecayOk | 1.3.6.1.4.1.2011.5.25.128.1.1.1.8 | Integer32 (500..10000) | RW | |
column · Integer32 (500..10000) · read-write · current The half decay time when alarm status is down. Unit: millisecond. | ||||
| ChwTADDecayNg | 1.3.6.1.4.1.2011.5.25.128.1.1.1.9 | Integer32 (500..10000) | RW | |
column · Integer32 (500..10000) · read-write · current The half decay time when alarm status is up. Unit: millisecond. | ||||
| ChwTADResetStatistics | 1.3.6.1.4.1.2011.5.25.128.1.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Whether to reset alarm statistics. 1 means resetting statistics once.
| ||||
| ChwTADResetTime | 1.3.6.1.4.1.2011.5.25.128.1.1.1.11 | DateAndTime | RO | |
column · DateAndTime · read-only · current Last reset time. | ||||
| ChwTADB3tcaThreshold | 1.3.6.1.4.1.2011.5.25.128.1.1.1.12 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current B3tca threshold in form of 10e-n. | ||||
| ChwTADSdbereThreshold | 1.3.6.1.4.1.2011.5.25.128.1.1.1.13 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current Sdbere threshold in form of 10e-n. | ||||
| ChwTADSfbereThreshold | 1.3.6.1.4.1.2011.5.25.128.1.1.1.14 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current Sfbere threshold in form of 10e-n. | ||||
| ChwTADB1tcaThreshold | 1.3.6.1.4.1.2011.5.25.128.1.1.1.15 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current B1tca threshold in form of 10e-n. | ||||
| ChwTADB2tcaThreshold | 1.3.6.1.4.1.2011.5.25.128.1.1.1.16 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current B2tca threshold in form of 10e-n. | ||||
| ChwTADBip2tcaThreshold | 1.3.6.1.4.1.2011.5.25.128.1.1.1.17 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current Bip2tca threshold in form of 10e-n. | ||||
| ThwTADAlarmTable | 1.3.6.1.4.1.2011.5.25.128.1.2 | NA | ||
table · not-accessible · current Transmission alarm damping alarm configuration table. | ||||
| RhwTADAlarmEntry | 1.3.6.1.4.1.2011.5.25.128.1.2.1 | NA | ||
| ChwTADAlarmIfIndex | 1.3.6.1.4.1.2011.5.25.128.1.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the interface. | ||||
| ChwTADAlarmType | 1.3.6.1.4.1.2011.5.25.128.1.2.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current Index number of the alarm. The range is from 1 to 39, corresponding to: auais, b3tca, lais, lof, lom, lop, los, lrdi, lrei, oof, pais, prdi, prei, pplm, rdool, rrool, sdbere, sfbere, trool, puneq, lcd, wlnk, oduais, odulck, oduoci, otuais, otulom, otusdber, otusfber, pmbdi, pmtim, rlof, rlos, roof, smbdi, smiae, smtim, b1tca, b2tca, prefectca.
| ||||
| ChwTADAlarmIfDown | 1.3.6.1.4.1.2011.5.25.128.1.2.1.3 | HWEnableValue | RW | |
column · HWEnableValue · read-write · current Whether this alarm leads to interface down. In default lais, lof and los are enabled to lead interface down. | ||||
| ChwTADAlarmLog | 1.3.6.1.4.1.2011.5.25.128.1.2.1.4 | HWEnableValue | RW | |
column · HWEnableValue · read-write · current Whether this alarm will be logged. In default all alarm types won't be logged. | ||||
| ChwTADAlarmStatus | 1.3.6.1.4.1.2011.5.25.128.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the alarm. 1 means alarm is up, 2 means alarm is down.
| ||||
| ChwTADAlarmInFilter | 1.3.6.1.4.1.2011.5.25.128.1.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Whether this alarm is in filtering status. 1 means alarm is in filtering status, 2 means alarm isn't in filtering status.
| ||||
| ChwTADAlarmFigure | 1.3.6.1.4.1.2011.5.25.128.1.2.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current This figure is used to evaluate the stability of the alarm. Large value means un-stability. | ||||
| ChwTADAlarmInSuppress | 1.3.6.1.4.1.2011.5.25.128.1.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Whether this alarm is in suppressing status. 1 means alarm is in suppressing status, 2 means alarm isn't in suppressing status.
| ||||
| ChwTADAlarmFlappingCount | 1.3.6.1.4.1.2011.5.25.128.1.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current How many times alarm's status changed. | ||||
| ChwTADAlarmSuppressCount | 1.3.6.1.4.1.2011.5.25.128.1.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current How many times alarm is suppressed. | ||||
| NhwTADConformance | 1.3.6.1.4.1.2011.5.25.128.2 | |||
| NhwTADGroups | 1.3.6.1.4.1.2011.5.25.128.2.1 | |||
| GhwTADInterfaceGroup | 1.3.6.1.4.1.2011.5.25.128.2.1.1 | |||
group · current A collection of objects providing device level control and status information for the interface. | ||||
| GhwTADAlarmGroup | 1.3.6.1.4.1.2011.5.25.128.2.1.2 | |||
group · current A collection of objects providing device level control and status information for the alarm. | ||||
| NhwTADCompliances | 1.3.6.1.4.1.2011.5.25.128.2.2 | |||
| MhwTADCompliance | 1.3.6.1.4.1.2011.5.25.128.2.2.1 | |||
compliance · current The core compliance statement for all TAD implementations.
| ||||
Textual conventions
HWEnableValueINTEGERdisable(2)enable(1)A simple status value for the object.