HUAWEI-SSH-MIB
HUAWEI Technology Co.,LtdThis mib which contains objects manages the SSH server and SSH client configuration.
snmptranslate -m HUAWEI-SSH-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-SSH-MIB <host> 1.3.6.1.4.1.2011.5.25.118Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwSSH | 1.3.6.1.4.1.2011.5.25.118 | |||
identity This mib which contains objects manages the SSH server and SSH client configuration. | ||||
| NhwSSHServer | 1.3.6.1.4.1.2011.5.25.118.1 | |||
| ShwStelnetServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH stelnet server is enable. Options: 1. enable(1) -The SSH stelnet server is enable. 2. disable(2)-The SSH stelnet server is disable. The default value is disable.
| ||||
| ShwSftpServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the sftp server is enable. Options: 1.enable(1) -the sftp server is enable. 2.disable(2)-the sftp server is disable. The default value is disable.
| ||||
| ShwSSHServerComp1x | 1.3.6.1.4.1.2011.5.25.118.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH server is compatible with SSH1.x.
The default is 2.
Options:
1. enable(1) -indicates that the version compatibility function of the SSH server is enabled
so that the SSH server is compatible with the SSHv1.x client.
2. disable(2)-indicates that the version compatibility function of the SSH server is disabled
and therefore the SSH server is incompatible with the SSHv1.x client.
| ||||
| ShwSSHServerTimeOut | 1.3.6.1.4.1.2011.5.25.118.1.4 | Integer32 (1..300) | RW | |
scalar · Integer32 (1..300) · read-write · current The object specifies the time when SSH authentication times out. The unit is the second and the default is 60 seconds.
| ||||
| ShwSSHServerRetry | 1.3.6.1.4.1.2011.5.25.118.1.5 | Integer32 (1..5) | RW | |
scalar · Integer32 (1..5) · read-write · current The object specifies authentication-retry times for SSH user. Default: 3 | ||||
| ShwSSHServerPort | 1.3.6.1.4.1.2011.5.25.118.1.6 | Integer32 (22 | 1025..65535) | RW | |
scalar · Integer32 (22 | 1025..65535) · read-write · current The object specifies port number for SSH server supporting. The default value is 22. | ||||
| ShwSSHServerKeyTimeOut | 1.3.6.1.4.1.2011.5.25.118.1.7 | Integer32 (0..24) | RW | |
scalar · Integer32 (0..24) · read-write · current The interval of updating the SSH server key pair. By default, value is 0 hour, which means server key can't be updated forever. Range: 0-24 Unit: hour
| ||||
| ShwSSHServerAlarmEnable | 1.3.6.1.4.1.2011.5.25.118.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether send trap information to NMS. Options: 1.enable(1) -Only when its value enable, allowed to send trap informations to NMS. 2.disable(2)-Can not to send trap informations to NMS.
| ||||
| ShwSftpMaxUserNum | 1.3.6.1.4.1.2011.5.25.118.1.9 | Integer32 (0..15) | RW | |
scalar · Integer32 (0..15) · read-write · current The object specifies the max number of sftp user that sftp server supporting. The default is 5. | ||||
| ShwSftpOnLineUserNum | 1.3.6.1.4.1.2011.5.25.118.1.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The object specifies the number of sftp user that has been connected to sftp server currently. | ||||
| ThwSSHUserTable | 1.3.6.1.4.1.2011.5.25.118.1.11 | NA | ||
table · not-accessible · current This table is used for querying and setting the information about SSH user. | ||||
| RhwSSHUserEntry | 1.3.6.1.4.1.2011.5.25.118.1.11.1 | NA | ||
row · not-accessible · current This table is used for querying and setting the information about SSH user. The index of this entry is hwSSHUserIndex.
| ||||
| ChwSSHUserIndex | 1.3.6.1.4.1.2011.5.25.118.1.11.1.1 | Integer32 (1..200) | NA | |
column · Integer32 (1..200) · not-accessible · current The object specifies the index of hwSSHUserTable. | ||||
| ChwSSHUserName | 1.3.6.1.4.1.2011.5.25.118.1.11.1.2 | OCTET STRING (SIZE (1..255)) | RC | |
column · OCTET STRING (SIZE (1..255)) · read-create · current The object specifies the name of a SSH user. The maximum length of the node is 255. | ||||
| ChwSSHUserAssignKey | 1.3.6.1.4.1.2011.5.25.118.1.11.1.3 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current The object specifies is a peer public key for a SSH user. This peer public key on the SSH server must exist and associate with hwRSAPublicKeyName. | ||||
| ChwSSHUserAuthType | 1.3.6.1.4.1.2011.5.25.118.1.11.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The object specifies the authentication type of SSH user.
The default authentication type is authPASSWORD.
Options:
1. authNULL(1) -No authenticate.
2. authPASSWORD(2) -Password authentication.
3. authRSA(3) -RSA key authentication.
4. authRSAorPASSWORDorED25519(4) -Password or RSA key or ED25519 key authentication.
5. authRSAandPASSWORD(5) -Password and RSA key authentication.
6. authDSA(6) -DSA key authentication.
7. authDSAandPASSWORD(7) -Password or DSA key authentication.
8. authAny(8) -Any authentication.
9. authECC(9) -ECC key authentication.
10.authECCandPASSWORD(10) -Password and ECC key authentication.
11.authSM2(11) -SM2 key authentication.
12.authSM2andPASSWORD(12) -Password and SM2 key authentication.
13. authX509V3RSA(13) -X509V3RSA key authentication.
14. authX509V3RSAandPASSWORD(14) -Password and X509V3RSA key authentication.
15. authED25519(15) -ED25519 key authentication.
16. authED25519andPASSWORD(16) -Password and ED25519 key authentication.
| ||||
| ChwSSHUserServiceType | 1.3.6.1.4.1.2011.5.25.118.1.11.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The object specifies the service type of SSH user. Options: 1. servicetypeNULL(1) -default service type. 2. servicetypeSTELNET(2) -The service type of the SSH user is STELNET. 3. servicetypeSFTP(3) -The service type of the SSH user is SFTP. 4. servicetypeALL(4) -The service type of the SSH user is all. 5. servicetypeSNetConf(5) -The service type of the SSH user is SNetConf. 6. servicetypeSftpSNetConf(6) -The service type of the SSH user is Sftp and SNetConf. 7. servicetypeSTelnetSftp(7) -The service type of the SSH user is STelnet and Sftp. 8. servicetypeSTelnetSNetConf(8) -The service type of the SSH user is STelnet and SNetConf.
| ||||
| ChwSSHUserSftpDirectory | 1.3.6.1.4.1.2011.5.25.118.1.11.1.6 | OCTET STRING (SIZE (0..255)) | RC | |
column · OCTET STRING (SIZE (0..255)) · read-create · current The object specifies the working directory for the sftp user. The total length of absolute path is 128,the length of single directory is 128. | ||||
| ChwSSHUserAuthorizationCMD | 1.3.6.1.4.1.2011.5.25.118.1.11.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The object specifies the authorization type of SSH user. When authorizationAAA is specified,
the SSH user will be authorizated by HWTACACS server. The default authorization is authorizationNULL,
indicating SSH user doesn't need to be authorizated by HWTACACS server.
Options:
1.authorizationNULL(1)-The default authorization is authorizationNULL,indicating SSH user
doesn't need to be authorizated by HWTACACS server.
2.authorizationAAA(2) -When authorizationAAA is specified,the SSH user will be
authorizated by HWTACACS server.
| ||||
| ChwSSHUserRowStatus | 1.3.6.1.4.1.2011.5.25.118.1.11.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The object specifies the status of this entry. When the status is active(1), hwSSHUserAssignKey, hwSSHUserAuthType, hwSSHUserServiceType, hwSSHUserSftpDirectory, and hwSSHUserAuthorizationCMD's value in the entry are allowed to be modified. | ||||
| ChwSSHUserAssignKeyType | 1.3.6.1.4.1.2011.5.25.118.1.11.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current The object specifies the public key type of SSH user. Options: 1. keyTypeNULL(0) -The public key type of SSH user is NULL. 2. keyTypeRSA(1)-The public key type of SSH user is RSA. 3. keyTypeDSA(2)-The public key type of SSH user is DSA 4. keyTypeECC(3)-The public key type of SSH user is ECC 5. keyTypeSM2(5)-The public key type of SSH user is SM2 6. keyTypePKI(6)-The public key type of SSH user is PKI. 7.keyTypeED25519(7)-The public key type os SSH user is ED25519.
| ||||
| ThwSSHServerSessionTable | 1.3.6.1.4.1.2011.5.25.118.1.12 | NA | ||
table · not-accessible · current The object shows current session information of the SSH server which includes username, version information, retry times of online users currently. | ||||
| RhwSSHServerSessionEntry | 1.3.6.1.4.1.2011.5.25.118.1.12.1 | NA | ||
row · not-accessible · current The object shows current session information of the SSH server which includes username, version information, retry times of online users currently. The index of this entry is hwSSHSessionIndex.
| ||||
| ChwSSHSessionIndex | 1.3.6.1.4.1.2011.5.25.118.1.12.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The object specifies the index of hwSSHServerSessionTable. | ||||
| ChwSSHSessionUserName | 1.3.6.1.4.1.2011.5.25.118.1.12.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the name of a SSH user, which has started a session. | ||||
| ChwSSHSessionConnectType | 1.3.6.1.4.1.2011.5.25.118.1.12.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The object specifies the line number supports a connection of SSH
user which is in connection with SSH server.
Options:
1.none(0) -No specifies the line number.
2.vty0(1) -The line number is 1.
3.vty1(2) -The line number is 2.
4.vty2(3) -The line number is 3.
5.vty3(4) -The line number is 4.
6.vty4(5) -The line number is 5.
7.vty5(6) -The line number is 6.
8.vty6(7) -The line number is 7.
9.vty7(8) -The line number is 8.
10.vty8(9) -The line number is 9.
11.vty9(10) -The line number is 10.
12.vty10(11) -The line number is 11.
13.vty11(12) -The line number is 12.
14.vty12(13) -The line number is 13.
15.vty13(14) -The line number is 14.
16.vty14(15) -The line number is 15.
17.vty15(16) -The line number is 16.
18.vty16(17) -The line number is 17.
19.vty17(18) -The line number is 18.
20.vty18(19) -The line number is 19.
21.vty19(20) -The line number is 20.
22.vty20(21) -The line number is 21.
| ||||
| ChwSSHSessionVer | 1.3.6.1.4.1.2011.5.25.118.1.12.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the version information of a SSH user which is in connection with SSH server. | ||||
| ChwSSHSessionState | 1.3.6.1.4.1.2011.5.25.118.1.12.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The object specifies the state of a SSH user which is in connection with SSH server. Options: 1.started(1)-indicates the state is start.
| ||||
| ChwSSHSessionRetry | 1.3.6.1.4.1.2011.5.25.118.1.12.1.6 | Integer32 (0..5) | RO | |
column · Integer32 (0..5) · read-only · current The object specifies SSH user's retrying times in authentications. | ||||
| ChwSSHSessionCtosCipher | 1.3.6.1.4.1.2011.5.25.118.1.12.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the cipher of custom to server. | ||||
| ChwSSHSessionStocCipher | 1.3.6.1.4.1.2011.5.25.118.1.12.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the cipher of server to custom. | ||||
| ChwSSHSessionCtosHmac | 1.3.6.1.4.1.2011.5.25.118.1.12.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the hmac of custom to server. | ||||
| ChwSSHSessionStocHmac | 1.3.6.1.4.1.2011.5.25.118.1.12.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the hmac of server to custom. | ||||
| ChwSSHSessionKex | 1.3.6.1.4.1.2011.5.25.118.1.12.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the key exchange. | ||||
| ChwSSHSessionAuthType | 1.3.6.1.4.1.2011.5.25.118.1.12.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the authentication type of SSH session. | ||||
| ChwSSHSessionServiceType | 1.3.6.1.4.1.2011.5.25.118.1.12.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the service type of SSH session. | ||||
| ChwSSHSessionKeyType | 1.3.6.1.4.1.2011.5.25.118.1.12.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current The object specifies the public key type of SSH session.
Options:
1.keyTypeRSA(1) -The public key type of SSH session is RSA.
2.keyTypeDSA(2) -The public key type of SSH session is DSA.
3.keyTypeECC(3) -The public key type of SSH session is ECC.
4.keyTypeSM2(5) -The public key type of SSH session is SM2.
5.keyTypePKI(6) -The public key type of SSH session is PKI.
6.keyTypeRSASHA256(7) -The public key type of SSH session is RSA_SHA2_256.
7.keyTypeRSASHA512(8) -The public key type of SSH session is RSA_SHA2_512.
8.keyTypeED25519(9) -The public key type of SSH session is ED25519.
9.keyTypeX509V3RSA2048SHA256(10) - The public key type of SSH session is X509V3_RSA2048_SHA25.
| ||||
| ChwSSHSessionConnectionIndex | 1.3.6.1.4.1.2011.5.25.118.1.12.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The object specifies the line number supports a connection of SSH user which is in connection with SSH(STelnet/Sftp/SNetConf) server. | ||||
| ChwSSHSessionCtosCompress | 1.3.6.1.4.1.2011.5.25.118.1.12.1.16 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the Compression algorithm of SSH client to server. | ||||
| ChwSSHSessionStocCompress | 1.3.6.1.4.1.2011.5.25.118.1.12.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current The object specifies the Compression algorithm of SSH Server to client. | ||||
| ThwRSAPublicKeyTable | 1.3.6.1.4.1.2011.5.25.118.1.13 | NA | ||
table · not-accessible · current A table of configuration about RSA Public Key. hwRSAPublicKeyName is the name of RSA Public Key. | ||||
| RhwRSAPublicKeyEntry | 1.3.6.1.4.1.2011.5.25.118.1.13.1 | NA | ||
row · not-accessible · current A table of configuration about RSA Public Key. The index of this entry is hwRSAPublicKeyName. hwRSAPublicKeyName is the name of RSA Public Key.
| ||||
| ChwRSAPublicKeyName | 1.3.6.1.4.1.2011.5.25.118.1.13.1.1 | OCTET STRING (SIZE (1..40)) | NA | |
column · OCTET STRING (SIZE (1..40)) · not-accessible · current The object specifies the name of RSA Public Key. | ||||
| ChwRSAPublicKeyCode | 1.3.6.1.4.1.2011.5.25.118.1.13.1.2 | OCTET STRING (SIZE (1..4096)) | RC | |
column · OCTET STRING (SIZE (1..4096)) · read-create · current The object specifies is RSA Public Key Code that in the format of der, the maximum length of the node is 4096. When the RSA public key is created, the index value is the name of the public key, which uses the ASCII code. The public key value must be generated through a tool. Firstly, use the PUTTYGEN.EXE tool to generate the matching public key and private key. Then, use the sshkey.exe tool to convert the generated public key to the required public key value. | ||||
| ChwRSAPublicKeyRowStatus | 1.3.6.1.4.1.2011.5.25.118.1.13.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The object specifies the status of this table entry. When the status is active(1), hwRSAPublicKeyName, hwRSAPublicKeyCode's value in the entry are allowed to be modified. createAndGo(4) is supplied to create a new instance of a conceptual row. destroy(6) is supplied to delete the instances associated with an existing conceptual row. | ||||
| ChwRSAPublicKeyFingerprint | 1.3.6.1.4.1.2011.5.25.118.1.13.1.4 | OCTET STRING (SIZE (0..60)) | RO | |
column · OCTET STRING (SIZE (0..60)) · read-only · current The object specifies the fingerprint of RSA Public Key Code, that including the public key algorithm, length and fingerprint. | ||||
| ShwSNetConfMaxUserNum | 1.3.6.1.4.1.2011.5.25.118.1.14 | Integer32 (0..20) | RW | |
scalar · Integer32 (0..20) · read-write · current The object specifies the max number of SNetConf user that SNetConf Server supporting. The default is 5. | ||||
| ShwSNetConfServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH SNetConf Server is enable.
Options:
1. enable(1) -The SSH SNetConf Server is enable.
2. disable(2)-The SSH SNetConf Server is disable.
The default is disable(2).
| ||||
| ShwSSHKeepAliveEnable | 1.3.6.1.4.1.2011.5.25.118.1.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the KeepAlive functionality on SSH Server is enable.
Options:
1. enable(1) -The KeepAlive functionality on SSH Server is enable.
2. disable(2)-The KeepAlive functionality on SSH Server is disable.
The default is 1.
| ||||
| ShwSCPServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH SCP Server is enable.
Options:
1. enable(1) -The SSH SCP server is enable.
2. disable(2)-The SSH SCP server is disable.
The default is 2.
| ||||
| ShwSCPMaxUserNum | 1.3.6.1.4.1.2011.5.25.118.1.18 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current The object specifies the max number of SCP user that SCP Server supporting. The default is 2. | ||||
| ShwSSHIPv4ServerPort | 1.3.6.1.4.1.2011.5.25.118.1.19 | Unsigned32 (22 | 1025..65535) | RW | |
scalar · Unsigned32 (22 | 1025..65535) · read-write · current The object specifies port number for SSH IPv4 server supporting. The default value is 22. | ||||
| ShwSSHIPv6ServerPort | 1.3.6.1.4.1.2011.5.25.118.1.20 | Unsigned32 (22 | 1025..65535) | RW | |
scalar · Unsigned32 (22 | 1025..65535) · read-write · current The object specifies port number for SSH IPv6 server supporting. The default value is 22. | ||||
| ShwStelnetIPv4ServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH stelnet IPv4 server is enable. Options: 1. enable(1) -The SSH stelnet IPv4 server is enable. 2. disable(2)-The SSH stelnet IPv4 server is disable. The default value is disable.
| ||||
| ShwStelnetIPv6ServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH stelnet IPv6 server is enable. Options: 1. enable(1) -The stelnet IPv6 server is enable. 2. disable(2)-The stelnet IPv6 server is disable. The default value is disable.
| ||||
| ShwSftpIPv4ServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the sftp IPv4 server is enable. Options: 1.enable(1) -The sftp IPv4 server is enable 2.disable(2)-The sftp IPv4 server is disable. The default value is disable.
| ||||
| ShwSftpIPv6ServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the sftp IPv6 server is enable. Options: 1.enable(1) -the sftp IPv6 server is enable. 2.disable(2)-the sftp IPv6 server is disable. The default value is disable.
| ||||
| ShwSCPIPv4ServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SCP IPv4 Server is enable.
Options:
1.enable(1) -the SCP IPv4 Server is enable.
2.disable(2)-the SCP IPv4 Server is disable.
The default value is disable.
| ||||
| ShwSCPIPv6ServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SCP IPv6 Server is enable.
Options:
1.enable(1) -the SCP IPv6 Server is enable.
2.disable(2)-the SCP IPv6 Server is disable.
The default value is disable.
| ||||
| ShwSNetConfIPv4ServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH SNetConf IPv4 server is enable. Options: 1.enable(1) -the SSH SNetConf IPv4 server is enable. 2.disable(2)-the SSH SNetConf IPv4 server is disable. The default value is disable.
| ||||
| ShwSNetConfIPv6ServerEnable | 1.3.6.1.4.1.2011.5.25.118.1.28 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH SNetConf IPv6 server is enable. Options: 1. enable(1) -The SSH SNetConf IPv6 server is enable. 2. disable(2)-The SSH SNetConf IPv6 server is disable. The default value is disable.
| ||||
| ShwSSHServerInsecureAlgo | 1.3.6.1.4.1.2011.5.25.118.1.29 | OCTET STRING (SIZE (1..255)) | AN | |
scalar · OCTET STRING (SIZE (1..255)) · accessible-for-notify · current The insecure algorithm list. | ||||
| NhwSSHServerAlg | 1.3.6.1.4.1.2011.5.25.118.1.30 | |||
| ShwSSHServerCipherAlg | 1.3.6.1.4.1.2011.5.25.118.1.30.1 | Bits | RW | |
scalar · Bits · read-write · current List of the SSH server cipher algorithm. Through this list, the index can be configured in batches in the format of bit-domain string. It can be configured as follows: to configure the index n, set the nth in the bit string to 1, that is,......000100......For example, to configure the index 1, set the first character of the string to 1, and issue 0100 0000, namely, # 0x40 (note that the value of the bit type starts from 0). For example, to configure the index 8, set the eighth character of the string to 1, and issue 0000 0000 1000 0000, namely, # 0x00 0x80.
| ||||
| ShwSSHServerHmacAlg | 1.3.6.1.4.1.2011.5.25.118.1.30.2 | Bits | RW | |
scalar · Bits · read-write · current List of the SSH server hmac algorithm. Through this list, the index can be configured in batches in the format of bit-domain string.
| ||||
| ShwSSHServerKeyExchangeAlg | 1.3.6.1.4.1.2011.5.25.118.1.30.3 | Bits | RW | |
scalar · Bits · read-write · current List of the SSH server key exchange algorithm. Through this list, the index can be configured in batches in the format of bit-domain string.
| ||||
| ShwSSHServerDhMinLen | 1.3.6.1.4.1.2011.5.25.118.1.30.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the length of DH. Options: 1.modulus1024(1), 2.modulus2048(2), 3.modulus3072(3), 4.modulus4096(4).
| ||||
| ShwSSHServerPublicKeyAlg | 1.3.6.1.4.1.2011.5.25.118.1.30.5 | Bits | RW | |
scalar · Bits · read-write · current List of the SSH server public key algorithm. Through this list, the index can be configured in batches in the format of bit-domain string.
| ||||
| NhwSSHClient | 1.3.6.1.4.1.2011.5.25.118.2 | |||
| ShwSSHFirstTimeAuthEnable | 1.3.6.1.4.1.2011.5.25.118.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the SSH client supports first-time-authentication. Options: 1.enable(1) -indicates the SSH client supports first-time-authentication. 2.disable(2)-indicates the SSH client does not support first-time-authentication. The default value is disable.
| ||||
| ThwSSHServerInfoTable | 1.3.6.1.4.1.2011.5.25.118.2.2 | NA | ||
table · not-accessible · current A table of configuration about the relation between the SSH server and the rsa peerkey. | ||||
| RhwSSHServerInfoEntry | 1.3.6.1.4.1.2011.5.25.118.2.2.1 | NA | ||
row · not-accessible · current A table of configuration about the relation between the SSH server and the rsa peerkey. The index of this entry is hwSSHServerIndex.
| ||||
| ChwSSHServerIndex | 1.3.6.1.4.1.2011.5.25.118.2.2.1.1 | Integer32 (1..20) | NA | |
column · Integer32 (1..20) · not-accessible · current The object specifies the index of hwSSHServerInfoTable. | ||||
| ChwSSHServerName | 1.3.6.1.4.1.2011.5.25.118.2.2.1.2 | OCTET STRING (SIZE (1..255)) | RC | |
column · OCTET STRING (SIZE (1..255)) · read-create · current The object specifies the name of a SSH server. | ||||
| ChwSSHServerAssignKey | 1.3.6.1.4.1.2011.5.25.118.2.2.1.3 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current The object specifies a peer public key for a SSH server. This peer public key must exist. | ||||
| ChwSSHServerRowStatus | 1.3.6.1.4.1.2011.5.25.118.2.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The object specifies the status of this entry. When the status is active, hwSSHServerAssignKey's value in the entry is allowed to be modified. | ||||
| ChwSSHServerAssignDSAKey | 1.3.6.1.4.1.2011.5.25.118.2.2.1.5 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current The object specifies a DSA peer public key for a SSH server.This peer public key must exist. | ||||
| ChwSSHServerAssignECCKey | 1.3.6.1.4.1.2011.5.25.118.2.2.1.6 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current The object specifies a ECC peer public key for a SSH server.This peer public key must exist. | ||||
| ChwSSHServerAssignSM2Key | 1.3.6.1.4.1.2011.5.25.118.2.2.1.7 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current The object specifies a SM2 peer public key for a SSH server.This peer public key must exist. | ||||
| ShwSSHKeepAliveInterval | 1.3.6.1.4.1.2011.5.25.118.2.3 | Integer32 (0..3600) | RW | |
scalar · Integer32 (0..3600) · read-write · current The object specifies KeepAlive Timeout interval on SSH Client. The default is 0. 0 specify no KeepAlive packet should be sent to Server. | ||||
| ShwSSHKeepAliveMaxCount | 1.3.6.1.4.1.2011.5.25.118.2.4 | Integer32 (1..30) | RW | |
scalar · Integer32 (1..30) · read-write · current The object specifies maximum KeepAlive packet to send to SSH Server before disconnect. The default is 3. | ||||
| ShwSSHClientInsecureAlgo | 1.3.6.1.4.1.2011.5.25.118.2.5 | OCTET STRING (SIZE (1..255)) | AN | |
scalar · OCTET STRING (SIZE (1..255)) · accessible-for-notify · current The insecure algorithm list. | ||||
| NhwSSHClientAlg | 1.3.6.1.4.1.2011.5.25.118.2.6 | |||
| ShwSSHClientCipherAlg | 1.3.6.1.4.1.2011.5.25.118.2.6.1 | Bits | RW | |
scalar · Bits · read-write · current List of the SSH client cipher algorithm. However, the blowfishcbc algorithm is not supported. Through this list, the index can be configured in batches in the format of bit-domain string. It can be configured as follows: to configure the index n, set the nth in the bit string to 1, that is,......000100......For example, to configure the index 1, set the first character of the string to 1, and issue 0100 0000, namely, # 0x40 (note that the value of the bit type starts from 0). For example, to configure the index 8, set the eighth character of the string to 1, and issue 0000 0000 1000 0000, namely, # 0x00 0x80.
| ||||
| ShwSSHClientHmacAlg | 1.3.6.1.4.1.2011.5.25.118.2.6.2 | Bits | RW | |
scalar · Bits · read-write · current List of the SSH client hmac algorithm. Through this list, the index can be configured in batches in the format of bit-domain string.
| ||||
| ShwSSHClientKeyExchangeAlg | 1.3.6.1.4.1.2011.5.25.118.2.6.3 | Bits | RW | |
scalar · Bits · read-write · current List of the SSH client key exchange algorithm. Through this list, the index can be configured in batches in the format of bit-domain string.
| ||||
| ShwSSHClientPublicKeyAlg | 1.3.6.1.4.1.2011.5.25.118.2.6.4 | Bits | RW | |
scalar · Bits · read-write · current List of the SSH client public key algorithm. Through this list, the index can be configured in batches in the format of bit-domain string.
| ||||
| NhwSSHNotifications | 1.3.6.1.4.1.2011.5.25.118.3 | |||
| !hwSSHSftpUserNumExceedMax | 1.3.6.1.4.1.2011.5.25.118.3.1 | |||
notification · current This notification was sent when the total number of sftp users requesting sftp service exceeds max user number configured.
| ||||
| !hwSSHServerUsedInsecureAlgo | 1.3.6.1.4.1.2011.5.25.118.3.2 | |||
notification · current This notification was sent when the insecure algorithm was configured for the SSH server.
| ||||
| !hwSSHClientUsedInsecureAlgo | 1.3.6.1.4.1.2011.5.25.118.3.3 | |||
notification · current This notification was sent when the insecure algorithm was configured for the SSH client.
| ||||
| !hwSSHServerUsedInsecureAlgoClear | 1.3.6.1.4.1.2011.5.25.118.3.4 | |||
notification · current This notification was sent when the insecure algorithm was configured for the SSH server.
| ||||
| !hwSSHClientUsedInsecureAlgoClear | 1.3.6.1.4.1.2011.5.25.118.3.5 | |||
notification · current This notification was sent when the insecure algorithm was configured for the SSH client.
| ||||
| NhwSSHMIBConformance | 1.3.6.1.4.1.2011.5.25.118.4 | |||
| NhwSSHMIBCompliances | 1.3.6.1.4.1.2011.5.25.118.4.1 | |||
| MhwSSHMIBCompliance | 1.3.6.1.4.1.2011.5.25.118.4.1.1 | |||
compliance · current The compliance statement for systems supporting the HUAWEI-SSH-MIB. | ||||
| NhwSSHMIBGroups | 1.3.6.1.4.1.2011.5.25.118.4.2 | |||
| GhwSSHServerGroup | 1.3.6.1.4.1.2011.5.25.118.4.2.1 | |||
group · current The SSH server attribute group.
| ||||
| GhwSSHUserGroup | 1.3.6.1.4.1.2011.5.25.118.4.2.2 | |||
group · current The SSH user's group. | ||||
| GhwSSHServerSessionGroup | 1.3.6.1.4.1.2011.5.25.118.4.2.3 | |||
group · current The SSH server's session group.
| ||||
| GhwSSHClientGroup | 1.3.6.1.4.1.2011.5.25.118.4.2.4 | |||
group · current The SSH client's attribute group. | ||||
| GhwSSHServerInfoGroup | 1.3.6.1.4.1.2011.5.25.118.4.2.5 | |||
group · current The SSH serverInfo's group. | ||||
| GhwSSHNotificationGroup | 1.3.6.1.4.1.2011.5.25.118.4.2.6 | |||
group · current The SSH Notification group. | ||||
| NhwRSALocalKeyTable | 1.3.6.1.4.1.2011.5.25.118.5 | |||
| ShwRSALocalHostPublicKeyCode | 1.3.6.1.4.1.2011.5.25.118.5.1 | OCTET STRING (SIZE (0..4096)) | RO | |
scalar · OCTET STRING (SIZE (0..4096)) · read-only · current The object specifies the local host RSA Public Key Code in the format of der. | ||||
| ShwRSALocalHostPublicKeyFingerprint | 1.3.6.1.4.1.2011.5.25.118.5.2 | OCTET STRING (SIZE (0..60)) | RO | |
scalar · OCTET STRING (SIZE (0..60)) · read-only · current The object specifies the fingerprint of the local host RSA Public Key Code, that including the public key algorithm, length and fingerprint. | ||||
| ShwRSALocalServerPublicKeyCode | 1.3.6.1.4.1.2011.5.25.118.5.3 | OCTET STRING (SIZE (0..4096)) | RO | |
scalar · OCTET STRING (SIZE (0..4096)) · read-only · current The object specifies the local server RSA Public Key Code in the format of der. | ||||
| ShwRSALocalServerPublicKeyFingerprint | 1.3.6.1.4.1.2011.5.25.118.5.4 | OCTET STRING (SIZE (0..60)) | RO | |
scalar · OCTET STRING (SIZE (0..60)) · read-only · current The object specifies the fingerprint of the local server RSA Public Key Code, that including the public key algorithm, length and fingerprint. | ||||
| NhwSftpClient | 1.3.6.1.4.1.2011.5.25.118.6 | |||
| ShwSftpServerAuthenticationSwitch | 1.3.6.1.4.1.2011.5.25.118.6.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object specifies whether the sftp server authentication switch. Options: 1.disable(1) -indicates the sftp server authentication switch disable. 2.enable(2)-indicates the sftp server authentication switch enable. The default value is enable.
| ||||
| ThwSftpServerAuthenticationTable | 1.3.6.1.4.1.2011.5.25.118.6.2 | NA | ||
table · not-accessible · current A table of configuration about the relation between the ip address and the sftp server public key name. | ||||
| RhwSftpServerAuthenticationEntry | 1.3.6.1.4.1.2011.5.25.118.6.2.1 | NA | ||
row · not-accessible · current A table of configuration about the relation between the ip address and the sftp server public key name. The index of this entry is hwSftpServerName.
| ||||
| ChwSftpServerName | 1.3.6.1.4.1.2011.5.25.118.6.2.1.1 | OCTET STRING (SIZE (1..255)) | NA | |
column · OCTET STRING (SIZE (1..255)) · not-accessible · current The IPv4 or IPv6 of the SFTP server. | ||||
| ChwSftpServerPublicKeyType | 1.3.6.1.4.1.2011.5.25.118.6.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The object specifies the sftp server public key type.
| ||||
| ChwSftpServerPublicKeyName | 1.3.6.1.4.1.2011.5.25.118.6.2.1.3 | OCTET STRING (SIZE (1..40)) | RW | |
column · OCTET STRING (SIZE (1..40)) · read-write · current The object specifies a sftp server public key name . This public key name must exist. | ||||
| ChwSftpServerRowStatus | 1.3.6.1.4.1.2011.5.25.118.6.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row operation object. createAndGo(4)is supplied to create a new instance of a conceptual row. destroy(6)is supplied to delete the instances associated with an existing conceptual row. | ||||
Traps / Notifications
- hwSSHClientUsedInsecureAlgo
1.3.6.1.4.1.2011.5.25.118.3.3 - hwSSHClientUsedInsecureAlgoClear
1.3.6.1.4.1.2011.5.25.118.3.5 - hwSSHServerUsedInsecureAlgo
1.3.6.1.4.1.2011.5.25.118.3.2 - hwSSHServerUsedInsecureAlgoClear
1.3.6.1.4.1.2011.5.25.118.3.4 - hwSSHSftpUserNumExceedMax
1.3.6.1.4.1.2011.5.25.118.3.1