HUAWEI-QINQ-MIB
HUAWEI Technology Co.,LtdModify hwQinQAsymmetryUserMode hwQinQSwapCfgFlag hwQinQGroupStat DEFVAL .
snmptranslate -m HUAWEI-QINQ-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-QINQ-MIB <host> 1.3.6.1.4.1.2011.5.25.116Imports
| HUAWEI-L2IF-MIB | VlanList |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId, VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwQinQ | 1.3.6.1.4.1.2011.5.25.116 | |||
identity Modify hwQinQAsymmetryUserMode hwQinQSwapCfgFlag hwQinQGroupStat DEFVAL . | ||||
| NhwQinQSystemBase | 1.3.6.1.4.1.2011.5.25.116.1 | |||
| ShwQinQSystemWellKnowMac | 1.3.6.1.4.1.2011.5.25.116.1.1 | MacAddress | RW | |
scalar · MacAddress · read-write · current The destination MAC address replacing the original destination macAddress is a well-known multicast address. This well-known multicast address shields BPDUs inner details to allow these BPDUs to be transmitted with a tag through the carrier's network. | ||||
| ShwQinQSystemBridgeRole | 1.3.6.1.4.1.2011.5.25.116.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current It indicates the Bridge 's location, having two possible values :Customers' Bridge and Providers' Bridge.
| ||||
| ShwBpduSystemDropPacketSta | 1.3.6.1.4.1.2011.5.25.116.1.3 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current View statistics about the discarded BPDUs. | ||||
| ShwQinQSystemEtherType | 1.3.6.1.4.1.2011.5.25.116.1.4 | Unsigned32 (1536..65535) | RW | |
scalar · Unsigned32 (1536..65535) · read-write · current The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. Default is '8100'h. | ||||
| NhwQinQMngObjects | 1.3.6.1.4.1.2011.5.25.116.2 | |||
| ThwQinQBpduTunnelTable | 1.3.6.1.4.1.2011.5.25.116.2.1 | NA | ||
table · not-accessible · current QinQ-port configuration table. | ||||
| RhwQinQBpduTunnelEntry | 1.3.6.1.4.1.2011.5.25.116.2.1.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the QinQ function. | ||||
| ChwQinQBpduTunnelIndex | 1.3.6.1.4.1.2011.5.25.116.2.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Index number of the interface. | ||||
| ChwQinQEtherEncpsType | 1.3.6.1.4.1.2011.5.25.116.2.1.1.2 | OCTET STRING (SIZE (2)) | RW | |
column · OCTET STRING (SIZE (2)) · read-write · current The value of tag type is encapsulated in the head of the Ethernet frame To distinguish the encapsulated mode between the 802.1Q and QinQ. | ||||
| ChwQinQBpduTunnelEnableOneQBpduTunnel | 1.3.6.1.4.1.2011.5.25.116.2.1.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The value indicates whether the 1Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableTwoQBpduTunnel is enabling, then this value should be disable. | ||||
| ChwQinQBpduTunnelEnableBpduTag | 1.3.6.1.4.1.2011.5.25.116.2.1.1.4 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current Whether to enable the setting of BPDU Tunnel tag. Default is disabled. | ||||
| ChwQinQBpduTunnelEnableTwoQBpduTunnel | 1.3.6.1.4.1.2011.5.25.116.2.1.1.5 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The value indicates whether the 2Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableOneQBpduTunnel is enabling, then this value should be disable. Default is disabled. | ||||
| ChwQinQBpduTunnelCustomerBpduTag | 1.3.6.1.4.1.2011.5.25.116.2.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The tag is inserted into the head of the BPDU ,to support that can be transmitted through the services' network. | ||||
| ChwQinQBpduTunnelCustomerBpduTagListLow | 1.3.6.1.4.1.2011.5.25.116.2.1.1.7 | OCTET STRING (SIZE (256)) | RW | |
column · OCTET STRING (SIZE (256)) · read-write · current The list describes accessible bode from different vlan (0 to 2047). | ||||
| ChwQinQBpduTunnelCustomerBpduTagListHigh | 1.3.6.1.4.1.2011.5.25.116.2.1.1.8 | OCTET STRING (SIZE (256)) | RW | |
column · OCTET STRING (SIZE (256)) · read-write · current The list describes accessible bpdu from different vlan (2048 to 4094). | ||||
| ChwQinQRemarkOuterTpid | 1.3.6.1.4.1.2011.5.25.116.2.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The value indicates the TPID of outer tag of packets that have two tag and output from the output interface of vlan-switch, If hwQinQEtherEncpsType is enabling, then this value should be 0xffff.
| ||||
| ChwQinQBpduTunnelEnableBpduFilter | 1.3.6.1.4.1.2011.5.25.116.2.1.1.10 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The value indicates whether the BPDU filter function is enabled. If hwQinQBpduTunnelEnableBpduFilter is enabled, then this value should be enable. | ||||
| ThwQinQSubIfVlanStackingTable | 1.3.6.1.4.1.2011.5.25.116.2.2 | NA | ||
table · not-accessible · current Used to configure packets'vlan stacking in sub interface, receive one-tag packets and transmit two-tag packets, where the outer-tag inserted is in hwQinQSubIfVlanStackingTable. | ||||
| RhwQinQSubIfVlanStackingEntry | 1.3.6.1.4.1.2011.5.25.116.2.2.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the QinQ-stacking function. | ||||
| ChwQinQSubIfStackingIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the QinQ-stacking interface. | ||||
| ChwQinQSubIfStackingCEVlanStart | 1.3.6.1.4.1.2011.5.25.116.2.2.1.2 | VlanId | NA | |
column · VlanId · not-accessible · current When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id. | ||||
| ChwQinQSubIfStackingCEVlanEnd | 1.3.6.1.4.1.2011.5.25.116.2.2.1.3 | VlanId | RC | |
column · VlanId · read-create · current When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id. | ||||
| ChwQinQSubIfStackGroupId | 1.3.6.1.4.1.2011.5.25.116.2.2.1.4 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Group-management id. | ||||
| ChwQinQSubIfStackingRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfVlanStackingTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfVlanStackingTable. | ||||
| ChwQinQSubIfStackingPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.2.1.6 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current PE vlan id. | ||||
| ThwQinQSubIfStackingStatTable | 1.3.6.1.4.1.2011.5.25.116.2.3 | NA | ||
table · not-accessible · current When a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to statistic total number of the out packets and in packets. | ||||
| RhwQinQSubIfStackingStatEntry | 1.3.6.1.4.1.2011.5.25.116.2.3.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the QinQ-stacking function. | ||||
| ChwQinQSubIfStackingStatIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the QinQ-stacking interface. | ||||
| ChwQinQSubIfStackingStatCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.3.1.2 | VlanId | NA | |
column · VlanId · not-accessible · current This object indicates the CE VLAN ID of the sub-interface configured with VLAN stacking. | ||||
| ChwQinQSubIfStackStatGroupId | 1.3.6.1.4.1.2011.5.25.116.2.3.1.3 | Integer32 (1..16) | RO | |
column · Integer32 (1..16) · read-only · current The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. | ||||
| ChwQinQSubIfStackingStatOutPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of out packets of the sub interface. | ||||
| ChwQinQSubIfStackingStatOutBytes | 1.3.6.1.4.1.2011.5.25.116.2.3.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of out bytes of the sub interface. | ||||
| ChwQinQSubIfStackingStatInPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of in packets of the sub interface. | ||||
| ChwQinQSubIfStackingStatInBytes | 1.3.6.1.4.1.2011.5.25.116.2.3.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of in bytes of the sub interface. | ||||
| ChwQinQSubIfStackStatOutBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of broadcast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfStackStatInBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of broadcast packets received from the sub interface. | ||||
| ChwQinQSubIfStackStatOutMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of multicast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfStackStatInMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of multicast packets received from the sub interface. | ||||
| ChwQinQSubIfStackStatOutUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of unicast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfStackStatInUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of unicast packets received from the sub interface. | ||||
| ThwQinQSubIfTermTable | 1.3.6.1.4.1.2011.5.25.116.2.4 | NA | ||
table · not-accessible · current The table is used to configure QinQ-termination function in sub interface, then packets transmitted from this sub interface input with two tags will be terminated. | ||||
| RhwQinQSubIfTermEntry | 1.3.6.1.4.1.2011.5.25.116.2.4.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the QinQ-termination function. | ||||
| ChwQinQSubIfTermIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.4.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the QinQ VLAN tag termination sub-interface. | ||||
| ChwQinQSubIfTermPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.4.1.2 | VlanId | NA | |
column · VlanId · not-accessible · current Outer VLAN ID of the packets which have two tags before being terminated. | ||||
| ChwQinQSubIfTermCEVlanStart | 1.3.6.1.4.1.2011.5.25.116.2.4.1.3 | VlanIdOrNone | NA | |
column · VlanIdOrNone · not-accessible · current When configure CE VLAN as a range, hwQinQSubIfTermCEVlanStart is the start VLAN ID and hwQinQSubIfTermCEVlanEnd is the end VLAN ID. | ||||
| ChwQinQSubIfTermCEVlanEnd | 1.3.6.1.4.1.2011.5.25.116.2.4.1.4 | VlanId | RC | |
column · VlanId · read-create · current When configure CE VLAN as a range, hwQinQSubIfTermCEVlanStart is the start VLAN ID and hwQinQSubIfTermCEVlanEnd is the end VLAN ID. | ||||
| ChwQinQSubIfTermGroupId | 1.3.6.1.4.1.2011.5.25.116.2.4.1.5 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Group-management id. | ||||
| ChwQinQSubIfTermRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.4.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfTermTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfTermTable. | ||||
| ChwQinQSubIfTermCeVlanAny | 1.3.6.1.4.1.2011.5.25.116.2.4.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The QinQ VLAN tag termination sub-interface permits packets carrying any inner VLAN tag.
| ||||
| ThwQinQSubIfTermStatTable | 1.3.6.1.4.1.2011.5.25.116.2.5 | NA | ||
table · not-accessible · current When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to statistic total number of the out packets and in packets. | ||||
| RhwQinQSubIfTermStatEntry | 1.3.6.1.4.1.2011.5.25.116.2.5.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the QinQ-termination function. | ||||
| ChwQinQSubIfTermStatIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.5.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the QinQ-termination interface. | ||||
| ChwQinQSubIfTermStatPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.5.1.2 | VlanId | NA | |
column · VlanId · not-accessible · current Outer vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. | ||||
| ChwQinQSubIfTermStatCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.5.1.3 | VlanId | NA | |
column · VlanId · not-accessible · current Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. | ||||
| ChwQinQSubIfTermStatGroupId | 1.3.6.1.4.1.2011.5.25.116.2.5.1.4 | Integer32 (1..16) | RO | |
column · Integer32 (1..16) · read-only · current The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. | ||||
| ChwQinQSubIfTermStatOutPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of out packets of the sub interface. | ||||
| ChwQinQSubIfTermStatOutBytes | 1.3.6.1.4.1.2011.5.25.116.2.5.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of out bytes of the sub interface. | ||||
| ChwQinQSubIfTermStatInPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of in packets of the sub interface. | ||||
| ChwQinQSubIfTermStatInBytes | 1.3.6.1.4.1.2011.5.25.116.2.5.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of in bytes of the sub interface. | ||||
| ChwQinQSubIfTermStatOutBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of broadcast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfTermStatInBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of broadcast packets received from the sub interface. | ||||
| ChwQinQSubIfTermStatOutMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of multicast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfTermStatInMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of multicast packets received from the sub interface. | ||||
| ChwQinQSubIfTermStatOutUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of unicast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfTermStatInUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of unicast packets received from the sub interface. | ||||
| ThwQinQStaticARPCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.6 | NA | ||
table · not-accessible · current The table is used to configure QinQ static ARP. | ||||
| RhwQinQStaticARPCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.6.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the QinQ function. | ||||
| ChwQinQStaticARPCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.6.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The interface's Index. | ||||
| ChwQinQStaticARPCfgIp | 1.3.6.1.4.1.2011.5.25.116.2.6.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address. | ||||
| ChwQinQStaticARPCfgMac | 1.3.6.1.4.1.2011.5.25.116.2.6.1.3 | MacAddress | RC | |
column · MacAddress · read-create · current The MAC address. | ||||
| ChwQinQStaticARPCfgVlan | 1.3.6.1.4.1.2011.5.25.116.2.6.1.4 | VlanId | RC | |
column · VlanId · read-create · current The first vlan id. | ||||
| ChwQinQStaticARPCfgCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.6.1.5 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The second vlan id. | ||||
| ChwQinQStaticARPCfgRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.6.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQStaticARPCfgTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQStaticARPCfgTable. | ||||
| ThwQinQStaticMACCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.7 | NA | ||
table · not-accessible · current The table is used to configure static MAC. | ||||
| RhwQinQStaticMACCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.7.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the QinQ function. | ||||
| ChwQinQStaticMACCfgMac | 1.3.6.1.4.1.2011.5.25.116.2.7.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The MAC address. | ||||
| ChwQinQStaticMACCfgVlan | 1.3.6.1.4.1.2011.5.25.116.2.7.1.2 | VlanId | NA | |
column · VlanId · not-accessible · current Vlan id that the MAC address belongs to. | ||||
| ChwQinQStaticMACCfgVsiName | 1.3.6.1.4.1.2011.5.25.116.2.7.1.3 | OCTET STRING (SIZE (0..31)) | NA | |
column · OCTET STRING (SIZE (0..31)) · not-accessible · current Name of VSI that the MAC address belongs to. | ||||
| ChwQinQStaticMACCfgPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.7.1.4 | VlanId | RC | |
column · VlanId · read-create · current PE vlan id for a Network Management Application attempts to configure hwQinQStaticMACCfgTable. | ||||
| ChwQinQStaticMACCfgCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.7.1.5 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current CE vlan id. | ||||
| ChwQinQStaticMACCfgType | 1.3.6.1.4.1.2011.5.25.116.2.7.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The type of the MAC.
| ||||
| ChwQinQStaticMACCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.7.1.7 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current Index number of the interface. | ||||
| ChwQinQStaticMACCfgFlag | 1.3.6.1.4.1.2011.5.25.116.2.7.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The config type.
| ||||
| ChwQinQStaticMACCfgRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.7.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQStaticMACCfgTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQStaticMACCfgTable. | ||||
| ThwQinQSubIfDot1qTermTable | 1.3.6.1.4.1.2011.5.25.116.2.8 | NA | ||
table · not-accessible · current Used to configure Dot1q-termination function in sub interface ,then packets transmitted from this sub interface input with one tag will be terminated. | ||||
| RhwQinQSubIfDot1qTermEntry | 1.3.6.1.4.1.2011.5.25.116.2.8.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the Dot1q-termination function. | ||||
| ChwQinQSubIfDot1qTermIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.8.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the Dot1q-termination interface. | ||||
| ChwQinQSubIfDot1qTermVidStart | 1.3.6.1.4.1.2011.5.25.116.2.8.1.2 | VlanId | NA | |
column · VlanId · not-accessible · current When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id. | ||||
| ChwQinQSubIfDot1qTermVidEnd | 1.3.6.1.4.1.2011.5.25.116.2.8.1.3 | VlanId | RC | |
column · VlanId · read-create · current When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id. | ||||
| ChwQinQSubIfDot1qTermGroupId | 1.3.6.1.4.1.2011.5.25.116.2.8.1.4 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Group-management id. | ||||
| ChwQinQSubIfDot1qTermRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.8.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfDot1qTermTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQSubIfDot1qTermTable. | ||||
| ThwQinQSubIfDot1qTermStatTable | 1.3.6.1.4.1.2011.5.25.116.2.9 | NA | ||
table · not-accessible · current When a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to statistic total number of the out packets and in packets. | ||||
| RhwQinQSubIfDot1qTermStatEntry | 1.3.6.1.4.1.2011.5.25.116.2.9.1 | NA | ||
row · not-accessible · current The entry of an interface configured Dot1q-termination function. | ||||
| ChwQinQSubIfDot1qTermStatIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.9.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the Dot1q-termination interface. | ||||
| ChwQinQSubIfDot1qTermStatCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.9.1.2 | VlanId | NA | |
column · VlanId · not-accessible · current Inner vlan in packets which input the Dot1q-termination sub interface, used to indicate the packets as an index. | ||||
| ChwQinQSubIfDot1qTermStatGroupId | 1.3.6.1.4.1.2011.5.25.116.2.9.1.3 | Integer32 (1..16) | RO | |
column · Integer32 (1..16) · read-only · current The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. | ||||
| ChwQinQSubIfDot1qTermStatOutPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of out packets of the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatOutBytes | 1.3.6.1.4.1.2011.5.25.116.2.9.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of out bytes of the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatInPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of in packets of the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatInBytes | 1.3.6.1.4.1.2011.5.25.116.2.9.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of in bytes of the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatOutBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of broadcast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatInBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of broadcast packets received from the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatOutMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of multicast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatInMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of multicast packets received from the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatOutUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of unicast packets transmitted out of the sub interface. | ||||
| ChwQinQSubIfDot1qTermStatInUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current Total number of unicast packets received from the sub interface. | ||||
| ThwQinQModeCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.10 | NA | ||
table · not-accessible · current The table contains mode type and ethernet encapsulation type. | ||||
| RhwQinQModeCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.10.1 | NA | ||
row · not-accessible · current The mode type and ethernet encapsulation type of an interface entry.
| ||||
| ChwQinQModeCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.10.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the interface. | ||||
| ChwQinQModeCfgMode | 1.3.6.1.4.1.2011.5.25.116.2.10.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Mode type of the interface.
| ||||
| ChwQinQEtherType | 1.3.6.1.4.1.2011.5.25.116.2.10.1.3 | Unsigned32 (1536..65535) | RW | |
column · Unsigned32 (1536..65535) · read-write · current The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. | ||||
| ChwQinQCeEtherType | 1.3.6.1.4.1.2011.5.25.116.2.10.1.4 | Unsigned32 (1536..65535) | RW | |
column · Unsigned32 (1536..65535) · read-write · current The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. | ||||
| ThwQinQCtrlVlanCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.11 | NA | ||
table · not-accessible · current The control-vlan id and control-vlan's attributes can be configured in sub interface. You must designate control-vlan as QinQ or Dot1q before configuring QinQ-termination function or Dot1q-termination function. | ||||
| RhwQinQCtrlVlanCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.11.1 | NA | ||
| ChwQinQCtrlVlanCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.11.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the sub interface. | ||||
| ChwQinQCtrlVlan | 1.3.6.1.4.1.2011.5.25.116.2.11.1.2 | VlanId | RC | |
column · VlanId · read-create · current Control-Vlan id. | ||||
| ChwQinQSubIfType | 1.3.6.1.4.1.2011.5.25.116.2.11.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The type of sub interface.
| ||||
| ChwQinQCtrlVlanFlag | 1.3.6.1.4.1.2011.5.25.116.2.11.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The service type of the sub interface, by setting hwQinQCtrlVlanFlag to the value (rtprotocolenable), the route-protocol attribute enabled; and by setting hwQinQCtrlVlanFlag to the value (localswitch), the localswitch attribute enabled, which means two tags of packets will be pruned. So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQCtrlVlanFlag as localswitch.
| ||||
| ChwQinQCtrlVlanRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.11.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This table can be created and deleted. | ||||
| ChwQinQFlexibleFlag | 1.3.6.1.4.1.2011.5.25.116.2.11.1.6 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current The service type of the sub interface, by setting hwQinQFlexibleFlag to the value (flexibleenable), the flexible attribute enabled; So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQFlexibleFlag as flexibleenable. | ||||
| ThwQinQGroupCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.12 | NA | ||
table · not-accessible · current The group-management id and group's attributes can be configured in sub interface. | ||||
| RhwQinQGroupCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.12.1 | NA | ||
| ChwQinQGroupCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.12.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the interface. | ||||
| ChwQinQGroupId | 1.3.6.1.4.1.2011.5.25.116.2.12.1.2 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Group-management id. | ||||
| ChwQinQGroupType | 1.3.6.1.4.1.2011.5.25.116.2.12.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The type of the group.
| ||||
| ChwQinQGroupStat | 1.3.6.1.4.1.2011.5.25.116.2.12.1.4 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Whether the statistic function is enabled. | ||||
| ChwQinQGroupRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.12.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This table can be created and deleted. | ||||
| ThwQinQAsymmetryCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.13 | NA | ||
table · not-accessible · current The table to configure asymmetry attribution of the interface. | ||||
| RhwQinQAsymmetryCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.13.1 | NA | ||
row · not-accessible · current The entry of the asymmetry configure table. | ||||
| ChwQinQAsymmetryCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.13.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the QinQ-termination interface. | ||||
| ChwQinQSubIfAsymmetry | 1.3.6.1.4.1.2011.5.25.116.2.13.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The asymmetry attribution of the QinQ-termination interface.
| ||||
| ChwQinQAsymmetryUserMode | 1.3.6.1.4.1.2011.5.25.116.2.13.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The user mode attribute of the QinQ-termination sub interface. | ||||
| ThwQinQRemarkCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.14 | NA | ||
table · not-accessible · current Interface remark config. | ||||
| RhwQinQRemarkCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.14.1 | NA | ||
row · not-accessible · current The entry of the interface remark configuration table. | ||||
| ChwQinQRemarkCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.14.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the sub interface, which should configure QinQ-termination function first. | ||||
| ChwQinQPriorityRemark | 1.3.6.1.4.1.2011.5.25.116.2.14.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
| ||||
| ThwBpduTunnelIngressTable | 1.3.6.1.4.1.2011.5.25.116.2.15 | NA | ||
table · not-accessible · current The table of bpdu tunnel ingress. | ||||
| RhwBpduTunnelIngressEntry | 1.3.6.1.4.1.2011.5.25.116.2.15.1 | NA | ||
row · not-accessible · current The entry of of bpdu tunnel ingress. | ||||
| ChwBpduTunnelIngressPortIndex | 1.3.6.1.4.1.2011.5.25.116.2.15.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Port index in interface. | ||||
| ChwBpduTunnelBpduIngressMacIndex | 1.3.6.1.4.1.2011.5.25.116.2.15.1.2 | BpduIndex | NA | |
column · BpduIndex · not-accessible · current bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C2-00-00-04 reserved04 01-80-C2-00-00-05 reserved05 01-80-C2-00-00-06 reserved06 01-80-C2-00-00-07 reserved07 01-80-C2-00-00-08 stp02 01-80-C2-00-00-09 reserved08 01-80-C2-00-00-0a hgmp 01-80-C2-00-00-0b reserved09 01-80-C2-00-00-0c reserved10 01-80-C2-00-00-0d reserved11 01-80-C2-00-00-0e reserved12 01-80-C2-00-00-0f reserved13 01-80-C2-00-00-10 reserved14 01-80-C2-00-00-11 reserved15 01-80-C2-00-00-12 reserved16 01-80-C2-00-00-13 reserved17 01-80-C2-00-00-14 isisLevel01 01-80-C2-00-00-15 isisLevel02 01-80-C2-00-00-16 reserved18 01-80-C2-00-00-17 reserved19 01-80-C2-00-00-18 reserved20 01-80-C2-00-00-19 reserved21 01-80-C2-00-00-1a reserved22 01-80-C2-00-00-1b reserved23 01-80-C2-00-00-1c reserved24 01-80-C2-00-00-1d reserved25 01-80-C2-00-00-1e reserved26 01-80-C2-00-00-1f reserved27 01-80-C2-00-00-20 gmrp 01-80-C2-00-00-21 gvrp 01-80-C2-00-00-22 reserved28 01-80-C2-00-00-23 reserved29 01-80-C2-00-00-24 reserved30 01-80-C2-00-00-25 reserved31 01-80-C2-00-00-26 reserved32 01-80-C2-00-00-27 reserved33 01-80-C2-00-00-28 reserved34 01-80-C2-00-00-29 reserved35 01-80-C2-00-00-2a reserved36 01-80-C2-00-00-2b reserved37 01-80-C2-00-00-2c reserved38 01-80-C2-00-00-2d reserved39 01-80-C2-00-00-2e reserved40 01-80-C2-00-00-2f reserved41 | ||||
| ChwBpduTunnelIngressAddress | 1.3.6.1.4.1.2011.5.25.116.2.15.1.3 | MacAddress | RC | |
column · MacAddress · read-create · current Group mac address. | ||||
| ChwBpduTunnelIngressRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.15.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Bpdu tunnek ingress row status. | ||||
| ThwBpduTunnelEgressTable | 1.3.6.1.4.1.2011.5.25.116.2.16 | NA | ||
table · not-accessible · current The table of bpdu tunnel egress. | ||||
| RhwBpduTunnelEgressEntry | 1.3.6.1.4.1.2011.5.25.116.2.16.1 | NA | ||
row · not-accessible · current The entry of bpdu tunnel egress. | ||||
| ChwBpduTunnelEgressPortIndex | 1.3.6.1.4.1.2011.5.25.116.2.16.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Port index in interface. | ||||
| ChwBpduTunnelBpduEgressMacIndex | 1.3.6.1.4.1.2011.5.25.116.2.16.1.2 | BpduIndex | NA | |
column · BpduIndex · not-accessible · current Bpdu MAC address list BPDU DMAC protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C2-00-00-04 reserved04 01-80-C2-00-00-05 reserved05 01-80-C2-00-00-06 reserved06 01-80-C2-00-00-07 reserved07 01-80-C2-00-00-08 stp02 01-80-C2-00-00-09 reserved08 01-80-C2-00-00-0a hgmp 01-80-C2-00-00-0b reserved09 01-80-C2-00-00-0c reserved10 01-80-C2-00-00-0d reserved11 01-80-C2-00-00-0e reserved12 01-80-C2-00-00-0f reserved13 01-80-C2-00-00-10 reserved14 01-80-C2-00-00-11 reserved15 01-80-C2-00-00-12 reserved16 01-80-C2-00-00-13 reserved17 01-80-C2-00-00-14 isisLevel01 01-80-C2-00-00-15 isisLevel02 01-80-C2-00-00-16 reserved18 01-80-C2-00-00-17 reserved19 01-80-C2-00-00-18 reserved20 01-80-C2-00-00-19 reserved21 01-80-C2-00-00-1a reserved22 01-80-C2-00-00-1b reserved23 01-80-C2-00-00-1c reserved24 01-80-C2-00-00-1d reserved25 01-80-C2-00-00-1e reserved26 01-80-C2-00-00-1f reserved27 01-80-C2-00-00-20 gmrp 01-80-C2-00-00-21 gvrp 01-80-C2-00-00-22 reserved28 01-80-C2-00-00-23 reserved29 01-80-C2-00-00-24 reserved30 01-80-C2-00-00-25 reserved31 01-80-C2-00-00-26 reserved32 01-80-C2-00-00-27 reserved33 01-80-C2-00-00-28 reserved34 01-80-C2-00-00-29 reserved35 01-80-C2-00-00-2a reserved36 01-80-C2-00-00-2b reserved37 01-80-C2-00-00-2c reserved38 01-80-C2-00-00-2d reserved39 01-80-C2-00-00-2e reserved40 01-80-C2-00-00-2f reserved41. | ||||
| ChwBpduTunnelEgressAddress | 1.3.6.1.4.1.2011.5.25.116.2.16.1.3 | MacAddress | RC | |
column · MacAddress · read-create · current Group mac address. | ||||
| ChwBpduTunnelEgressRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.16.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| ThwBpduTunnelVlanTable | 1.3.6.1.4.1.2011.5.25.116.2.17 | NA | ||
table · not-accessible · current The table of port bpdu tunnel. | ||||
| RhwBpduTunnelVlanEntry | 1.3.6.1.4.1.2011.5.25.116.2.17.1 | NA | ||
| ChwBpduTunnelPortIndex | 1.3.6.1.4.1.2011.5.25.116.2.17.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Port index in interface. | ||||
| ChwBpduTunnelEnable | 1.3.6.1.4.1.2011.5.25.116.2.17.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Bpdu tunnel enable.
| ||||
| ChwBpduTunnelVlanListLow | 1.3.6.1.4.1.2011.5.25.116.2.17.1.3 | VlanList | RW | |
column · VlanList · read-write · current Vlan bpdu tunnel in port. | ||||
| ChwBpduTunnelVlanListHigh | 1.3.6.1.4.1.2011.5.25.116.2.17.1.4 | VlanList | RW | |
column · VlanList · read-write · current Vlan bpdu tunnel in port. | ||||
| ThwBpduTunnelTable | 1.3.6.1.4.1.2011.5.25.116.2.18 | NA | ||
table · not-accessible · current The table of bpdu tunnel. | ||||
| RhwBpduTunnelEntry | 1.3.6.1.4.1.2011.5.25.116.2.18.1 | NA | ||
| ChwBpduTunnelBpduIndex | 1.3.6.1.4.1.2011.5.25.116.2.18.1.1 | BpduIndex | NA | |
column · BpduIndex · not-accessible · current Bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 (1) 01-80-C2-00-00-01 pauseFrame (2) 01-80-C2-00-00-02 reserved02 (3) 01-80-C2-00-00-03 reserved03 (4) 01-80-C2-00-00-04 reserved04 (5) 01-80-C2-00-00-05 reserved05 (6) 01-80-C2-00-00-06 reserved06 (7) 01-80-C2-00-00-07 reserved07 (8) 01-80-C2-00-00-08 stp02 (9) 01-80-C2-00-00-09 reserved08 (10) 01-80-C2-00-00-0a hgmp (11) 01-80-C2-00-00-0b reserved09 (12) 01-80-C2-00-00-0c reserved10 (13) 01-80-C2-00-00-0d reserved11 (14) 01-80-C2-00-00-0e reserved12 (15) 01-80-C2-00-00-0f reserved13 (16) 01-80-C2-00-00-10 reserved14 (17) 01-80-C2-00-00-11 reserved15 (18) 01-80-C2-00-00-12 reserved16 (19) 01-80-C2-00-00-13 reserved17 (20) 01-80-C2-00-00-14 isisLevel01 (21) 01-80-C2-00-00-15 isisLevel02 (22) 01-80-C2-00-00-16 reserved18 (23) 01-80-C2-00-00-17 reserved19 (24) 01-80-C2-00-00-18 reserved20 (25) 01-80-C2-00-00-19 reserved21 (26) 01-80-C2-00-00-1a reserved22 (27) 01-80-C2-00-00-1b reserved23 (28) 01-80-C2-00-00-1c reserved24 (29) 01-80-C2-00-00-1d reserved25 (30) 01-80-C2-00-00-1e reserved26 (31) 01-80-C2-00-00-1f reserved27 (32) 01-80-C2-00-00-20 gmrp (33) 01-80-C2-00-00-21 gvrp (34) 01-80-C2-00-00-22 reserved28 (35) 01-80-C2-00-00-23 reserved29 (36) 01-80-C2-00-00-24 reserved30 (37) 01-80-C2-00-00-25 reserved31 (38) 01-80-C2-00-00-26 reserved32 (39) 01-80-C2-00-00-27 reserved33 (40) 01-80-C2-00-00-28 reserved34 (41) 01-80-C2-00-00-29 reserved35 (42) 01-80-C2-00-00-2a reserved36 (43) 01-80-C2-00-00-2b reserved37 (44) 01-80-C2-00-00-2c reserved38 (45) 01-80-C2-00-00-2d reserved39 (46) 01-80-C2-00-00-2e reserved40 (47) 01-80-C2-00-00-2f reserved41 (48) 01-80-C2-00-00-02 lacp (49) 01-00-0C-CC-CC-CC cdp (50) 01-00-0C-CC-CC-CC pagp (51) 01-00-0C-CC-CC-CC udld (52) 01-00-0C-CC-CC-CC vtp (53) . | ||||
| ChwBpduTunnelBpduEnable | 1.3.6.1.4.1.2011.5.25.116.2.18.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Bpdu tunnel enable or disable.
| ||||
| ChwBpduTunnelMultiAddress | 1.3.6.1.4.1.2011.5.25.116.2.18.1.3 | MacAddress | RC | |
column · MacAddress · read-create · current Group MAC address. | ||||
| ChwBpduTunnelRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.18.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. | ||||
| ThwQinQSwapCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.19 | NA | ||
table · not-accessible · current This table describes the vlan swap configurations of interfaces. | ||||
| RhwQinQSwapCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.19.1 | NA | ||
row · not-accessible · current An entry is created for each active ethernet type interface in the device and deleted when the interface been not exist.
| ||||
| ChwQinQSwapCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.19.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the interface. | ||||
| ChwQinQSwapCfgFlag | 1.3.6.1.4.1.2011.5.25.116.2.19.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current QinQ swap flag of the interface, which indicates whether to swap the two vlan tags or not when the interface receives a packet with two 802.1q tags. | ||||
| ThwQinQSubIfMapTable | 1.3.6.1.4.1.2011.5.25.116.2.20 | NA | ||
table · not-accessible · current The table is used to configure QinQ-mapping function in sub interface, then packets transmitted from this sub interface input with one or two tags will be mapped to other tag or tags. | ||||
| RhwQinQSubIfMapEntry | 1.3.6.1.4.1.2011.5.25.116.2.20.1 | NA | ||
row · not-accessible · current The entry of an interface enabled the QinQ-Map function. | ||||
| ChwQinQSubIfMapIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.20.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index number of the QinQ-Map interface. | ||||
| ChwQinQSubIfPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.20.1.2 | Integer32 (0..4094) | NA | |
column · Integer32 (0..4094) · not-accessible · current Outer vlan id of the packets which have two tags before being Mapped. | ||||
| ChwQinQSubIfCEVlanStart | 1.3.6.1.4.1.2011.5.25.116.2.20.1.3 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current Inner start vlan id of the packets which have two tags before being Mapped. | ||||
| ChwQinQSubIfCEVlanEnd | 1.3.6.1.4.1.2011.5.25.116.2.20.1.4 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current Inner end vlan id of the packets which have two tags before being Mapped. | ||||
| ChwQinQSubIfPEVlanMap | 1.3.6.1.4.1.2011.5.25.116.2.20.1.5 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current Outer vlan id of the packets which have two tags after being Mapped. | ||||
| ChwQinQSubIfPEEtherType | 1.3.6.1.4.1.2011.5.25.116.2.20.1.6 | Unsigned32 (1536..65535) | RC | |
column · Unsigned32 (1536..65535) · read-create · current EtherType of Pe Mapped. | ||||
| ChwQinQSubIfCEVlanMap | 1.3.6.1.4.1.2011.5.25.116.2.20.1.7 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current Inner vlan id of the packets which have two tags after being Mapped. | ||||
| ChwQinQSubIfCEEtherType | 1.3.6.1.4.1.2011.5.25.116.2.20.1.8 | Unsigned32 (1536..65535) | RC | |
column · Unsigned32 (1536..65535) · read-create · current EtherType of Ce Mapped. | ||||
| ChwQinQSubIfMapGroupId | 1.3.6.1.4.1.2011.5.25.116.2.20.1.9 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Group-management id. | ||||
| ChwQinQSubIfMapPe8021p | 1.3.6.1.4.1.2011.5.25.116.2.20.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
| ||||
| ChwQinQSubIfMapCe8021p | 1.3.6.1.4.1.2011.5.25.116.2.20.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
| ||||
| ChwQinQSubIfMapCetoPeFlag | 1.3.6.1.4.1.2011.5.25.116.2.20.1.12 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current The service type of the sub interface, by setting MapCetoPeFlag to the value (CetoPeenable), the 8021p CetoPeenable attribute enabled. | ||||
| ChwQinQSubIfMapRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.20.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfMapTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfMapTable. | ||||
| ThwQinQStackingVlanCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.21 | NA | ||
table · not-accessible · current QinQ Stacking Vlan configuration table. | ||||
| RhwQinQStackingVlanCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.21.1 | NA | ||
row · not-accessible · current This object indicates the configuration table for QinQ Stacking Vlan. | ||||
| ChwQinQStackingVlanCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.21.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the Index number of the vlanif interface. | ||||
| ChwQinQStackingVlanCfgVlanId | 1.3.6.1.4.1.2011.5.25.116.2.21.1.2 | VlanId | RC | |
column · VlanId · read-create · current This object indicates the outer vlan id for QinQ Stacking Vlan. | ||||
| ChwQinQStackingVlanCfgRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.21.1.50 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the RowStatus of hwQinQStackingVlanTable. | ||||
| NhwQinQConformance | 1.3.6.1.4.1.2011.5.25.116.3 | |||
| NhwQinQGroups | 1.3.6.1.4.1.2011.5.25.116.3.1 | |||
| GhwQinQSystemBaseGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.1 | |||
group · current A collection of objects providing device level control and status information for the system. | ||||
| GhwQinQBpduTunnelGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.2 | |||
group · current A collection of objects providing device level control and status information for the interface.
| ||||
| GhwQinQSubIfVlanStackingGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.3 | |||
group · current A collection of objects providing device level control and status information for the sub interface. | ||||
| GhwQinQSubIfStackingStatGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.4 | |||
group · current A collection of objects providing device level control and status information for the sub interface.
| ||||
| GhwQinQSubIfTermGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.5 | |||
group · current A collection of objects providing device level control and status information for the sub interface. | ||||
| GhwQinQSubIfTermStatGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.6 | |||
group · current A collection of objects providing device level control and status information for the sub interface.
| ||||
| GhwQinQStaticARPCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.7 | |||
group · current A collection of items of static ARP table. | ||||
| GhwQinQStaticMACCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.8 | |||
group · current A collection of items of static MAC table. | ||||
| GhwQinQSubIfDot1qTermGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.9 | |||
group · current A collection of items of Dot1q-termination table. | ||||
| GhwQinQSubIfDot1qTermStatGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.10 | |||
group · current A collection of items of Dot1q-termination statistic table.
| ||||
| GhwQinQModeCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.11 | |||
| GhwQinQCtrlVlanCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.12 | |||
group · current A collection of items of Control vlan table. | ||||
| GhwQinQGroupCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.13 | |||
group · current A collection of items of group table. | ||||
| GhwQinQAsymmetryCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.14 | |||
group · current A collection of items of asymmetry config table. | ||||
| GhwQinQRemarkCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.15 | |||
| GhwBpduTunnelIngressGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.16 | |||
group · current A collection of items of Group Mac table. | ||||
| GhwBpduTunnelEgressGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.17 | |||
group · current A collection of items of Group Mac table. | ||||
| GhwBpduTunnelVlanGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.18 | |||
group · current A collection of items of Mode port bpdu tunnel table. | ||||
| GhwBpduTunnelGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.19 | |||
group · current A collection of items of bpdu tunnel mac table. | ||||
| GhwQinQSwapCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.20 | |||
| GhwQinQSubIfMapGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.21 | |||
group · current A collection of objects providing device level control and status information for the sub interface. | ||||
| GhwQinQStackingVlanCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.22 | |||
group · current A collection of items of QinQ Stacking Vlan config table. | ||||
| NhwQinQCompliances | 1.3.6.1.4.1.2011.5.25.116.3.2 | |||
| MhwQinQCompliance | 1.3.6.1.4.1.2011.5.25.116.3.2.1 | |||
compliance · current The core compliance statement for all implementations. | ||||
Textual conventions
BpduIndexINTEGERcdp(50)gmrp(33)gvrp(34)hgmp(11)isisLevel01(21)isisLevel02(22)lacp(49)pagp(51)pauseFrame(2)reserved02(3)reserved03(4)reserved04(5)reserved05(6)reserved06(7)reserved07(8)reserved08(10)reserved09(12)reserved10(13)reserved11(14)reserved12(15)reserved13(16)reserved14(17)reserved15(18)reserved16(19)reserved17(20)reserved18(23)reserved19(24)reserved20(25)reserved21(26)reserved22(27)reserved23(28)reserved24(29)reserved25(30)reserved26(31)reserved27(32)reserved28(35)reserved29(36)reserved30(37)reserved31(38)reserved32(39)reserved33(40)reserved34(41)reserved35(42)reserved36(43)reserved37(44)reserved38(45)reserved39(46)reserved40(47)reserved41(48)stp01(1)stp02(9)udld(52)vtp(53)A list value for bpdu.
Groups and compliance
- hwBpduTunnelEgressGroup
- hwBpduTunnelGroup
- hwBpduTunnelIngressGroup
- hwBpduTunnelVlanGroup
- hwQinQAsymmetryCfgGroup
- hwQinQBpduTunnelGroup
- hwQinQCompliance
- hwQinQCtrlVlanCfgGroup
- hwQinQGroupCfgGroup
- hwQinQModeCfgGroup
- hwQinQRemarkCfgGroup
- hwQinQStackingVlanCfgGroup
- hwQinQStaticARPCfgGroup
- hwQinQStaticMACCfgGroup
- hwQinQSubIfDot1qTermGroup
- hwQinQSubIfDot1qTermStatGroup
- hwQinQSubIfMapGroup
- hwQinQSubIfStackingStatGroup
- hwQinQSubIfTermGroup
- hwQinQSubIfTermStatGroup
- hwQinQSubIfVlanStackingGroup
- hwQinQSwapCfgGroup
- hwQinQSystemBaseGroup