HUAWEI-POWER-MIB
HUAWEI Technology Co.,LtdThis MIB is used for defining Power Monitor management MIB objects.
snmptranslate -m HUAWEI-POWER-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-POWER-MIB <host> 1.3.6.1.4.1.2011.6.2Imports
| HUAWEI-DEVICE-MIB | hwFrameIndex |
|---|---|
| HUAWEI-ENVIRONMENT-MIB | hwDigChannelIndex, hwEnvEmuIndex, hwEnvEmuType |
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwPower | 1.3.6.1.4.1.2011.6.2 | |||
identity This MIB is used for defining Power Monitor management MIB objects. | ||||
| NhwPowerMonObjects | 1.3.6.1.4.1.2011.6.2.1 | |||
| ThwPowerSysInfoTable | 1.3.6.1.4.1.2011.6.2.1.1 | NA | ||
table · not-accessible · current Power basic information table. The indexes of this table are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex comes from hwEnvironmentInfoTable and is the index of the monitoring unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. | ||||
| RhwPowerSysInfoEntry | 1.3.6.1.4.1.2011.6.2.1.1.1 | NA | ||
row · not-accessible · current Power basic information table. The indexes of this entry are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex comes from hwEnvironmentInfoTable and is the index of the monitoring unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit.
| ||||
| ChwPowerIndex | 1.3.6.1.4.1.2011.6.2.1.1.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Index of the power supply monitored by the monitoring unit | ||||
| ChwPowerType | 1.3.6.1.4.1.2011.6.2.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Type of the Power emu device. Options: 1.power4875(1) - Type of the Power emu device is power4875 2.power4810(2) - Type of the Power emu device is power4810 3.power48100(3) - Type of the Power emu device is power48100 4.power4850(4) - Type of the Power emu device is power4850 5.power48240(5) - Type of the Power emu device is power48240 6.power48120(6) - Type of the Power emu device is power48120 7.power48300(7) - Type of the Power emu device is power48300 8.power48240SinglePhase(8) - Type of the Power emu device is power48240SinglePhase 9.universalPower(9) - Type of the Power emu device is universalPower 10.power4845(10) - Pwr4845 11.rpower(11) - Type of the Power emu device is rpower 12.power4805(15) - Type of the Power emu device is power4805 13.power4820(16) - Type of the Power emu device is power4820 14.onps(17) - Type of the Power emu device is onps 15.power4875l(18) - Pwr4875L 16.psma(100) - Type of the Power emu device is psma 17.perm-al175nt(101) - Type of the Power emu device is perm-al175nt 18.mcs1800(102) - Type of the Power emu device is mcs1800 19.mcs1800A(103) - Type of the Power emu device is mcs1800A 20.mcs3000(104) - Type of the Power emu device is mcs3000 21.sm40sm60(105) - Type of the Power emu device is sm40sm60 22.scu(106) - Type of the Power emu device is scu 23.eltek(107) - Type of the Power emu device is eltek 24.dk04(108) - Type of the Power emu device is dk04 25.dk04C(109) - Type of the Power emu device is dk04C 26.dpc(110) - Type of the Power emu device is dpc 27.power4830(120) - Pwr4830L 28.h831pmua(121) - Type of the Power emu device is h831pmua 29.power3000(122) - Pwr3000 30.liFeBattery(123) - Type of the Power emu device is LiFeBattery 31.etp4830(125), - ETP4830 32.etp4890(126), - ETP4890 33.h801pmu(127), - H801PMU 34.etp48150(128), - ETP48150 35.etp4850(129), - ETP4850 36.etp48200(130), - ETP48200 37.etp4860(131), - ETP4860 38.other(255) - Unkown
| ||||
| ChwPowerName | 1.3.6.1.4.1.2011.6.2.1.1.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current Power name. Invalid: null string. | ||||
| ChwPowerState | 1.3.6.1.4.1.2011.6.2.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Power board status: Refers to the status of communication between the internal monitor board of the power device and the external upper board. Options: 1.normal(1) - indicates the normal state 2.fault(2) - indicates the faulty state 3.protecting(3)- indicates that the backup power supply works in the protection state 4.switched(4) - indicates that the main power supply is faulty, and is protected by backup power supply 5.invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwPowerRowStatus | 1.3.6.1.4.1.2011.6.2.1.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation. The values 1 and 2 are supported currently. 1 indicates the activation status, and 2 indicates the non-activation status. | ||||
| ChwPowerControlMode | 1.3.6.1.4.1.2011.6.2.1.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Control mode of the power monitor module. Options: 1.manualControl(1) - control by manual, the remote mode 2.autoControl(2) - auto control mode, the default is auto control mode 3.invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwPowerRemoteFrameID | 1.3.6.1.4.1.2011.6.2.1.1.1.7 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current Apply for remote power system. It is the frame ID that the remote unit exists in | ||||
| ChwPowerProtect | 1.3.6.1.4.1.2011.6.2.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Apply for remote power system. It is used to enable or disable N+1 protection function. Options: 1.protect(1) - enables the N+1 protection function 2.undoProtect(2) - disables the N+1 protection function
| ||||
| ChwPowerVersion | 1.3.6.1.4.1.2011.6.2.1.1.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current Version of power | ||||
| ChwPowerSupplyState | 1.3.6.1.4.1.2011.6.2.1.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Power supply modes. Options: 1.ac(1) - indicates the AC power supply 2.battery(2) - indicates power supply by the batteries
| ||||
| ChwPowerWiringCheckSwitch | 1.3.6.1.4.1.2011.6.2.1.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Power wiring check switch of SMU. Options: 1. disable(1) - indicates that the power wiring check state of SMU is disabled 2. enable(2) - indicates that the power wiring check state is enabled 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation
| ||||
| ChwPowerLatitude | 1.3.6.1.4.1.2011.6.2.1.1.1.12 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The power latitude value. Invalid: -. | ||||
| ChwPowerLongitude | 1.3.6.1.4.1.2011.6.2.1.1.1.13 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The power longitude value. Invalid: -. | ||||
| ChwPowerBluetoothSwitch | 1.3.6.1.4.1.2011.6.2.1.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Power bluetooth state of SMU. Options: 1. enable(0) - indicates that the power bluetooth state of SMU is enabled. 2. disable(1) - indicates that the power bluetooth state of SMU is disabled. 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation
| ||||
| ThwACInputTable | 1.3.6.1.4.1.2011.6.2.1.2 | NA | ||
table · not-accessible · current AC input table. Through this table, AC input monitoring parameters of 4875 power supply, 4845 power supply, 4810 power supply, 48100 power supply, and 48240 power supply can be set and queried. The indexes of this table are hwEnvEmuIndex, hwPowerIndex, and hwACLoopIndex. hwEnvEmuIndex is the index of the monitoring unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwACLoopIndex is the index of the AC input power supply monitored by the monitoring unit. | ||||
| RhwACInputEntry | 1.3.6.1.4.1.2011.6.2.1.2.1 | NA | ||
row · not-accessible · current AC input table. Through this table, AC input monitoring parameters of 4875 power supply, 4845 power supply, 4810 power supply, 48100 power supply, and 48240 power supply can be set and queried. The indexes of this entry are hwEnvEmuIndex, hwPowerIndex, and hwACLoopIndex. hwEnvEmuIndex is the index of the monitoring unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwACLoopIndex is the index of the AC input power supply monitored by the monitoring unit. | ||||
| ChwACLoopIndex | 1.3.6.1.4.1.2011.6.2.1.2.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Input loop index. There are two channels of AC current input, which are the backup for each other. | ||||
| ChwACPowerState | 1.3.6.1.4.1.2011.6.2.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Status of power supply. Options: 1.normal(1) - indicates that the power supply is normal 2.offline(2) - indicates that the power supply is offline 3.exceedVoltage(3) - indicates that the power supply is overvoltage 4.belowVoltage(4) - indicates that the power supply is undervoltage 5.backup(5) - indicates that the power supply is not supported currently 6.invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACVoltA | 1.3.6.1.4.1.2011.6.2.1.2.1.3 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current AC Inuput voltage A. Unit: mV invalid: -1 - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACCurrentA | 1.3.6.1.4.1.2011.6.2.1.2.1.4 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current AC input Current A. Unit: mA invalid: -1 - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACVoltB | 1.3.6.1.4.1.2011.6.2.1.2.1.5 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current AC input voltage B. Unit: mv invalid: -1 - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACCurrentB | 1.3.6.1.4.1.2011.6.2.1.2.1.6 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current AC input current B. Unit: mA invalid: -1 - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACVoltC | 1.3.6.1.4.1.2011.6.2.1.2.1.7 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current AC input voltage C. Unit: mV invalid: -1 - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACCurrentC | 1.3.6.1.4.1.2011.6.2.1.2.1.8 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current AC input current C. Unit: mA invalid: -1 - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACVoltageHigh | 1.3.6.1.4.1.2011.6.2.1.2.1.9 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current AC input over-voltage alarm threshold. Unit: mV invalid: -1 - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACVoltageLow | 1.3.6.1.4.1.2011.6.2.1.2.1.10 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current AC input under-voltage alarm threshold. Unit: mV invalid: -1 - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACRowStatus | 1.3.6.1.4.1.2011.6.2.1.2.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current Only the add operation, delete operation, and status query operation are supported. | ||||
| ChwACVoltageAState | 1.3.6.1.4.1.2011.6.2.1.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Phase AB/A of AC input state. Options: 1. normal(0) - indicates that the Phase AB/A of AC input state is normal 2. belowVoltage(1) - indicates that the Phase AB/A of AC input state is belowVoltage 3. exceedVoltage(2) - indicates that the Phase AB/A of AC input state is exceedVoltage 4. missingPhase(3) - indicates that the Phase AB/A of AC input state is missing-phase 5. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACVoltageBState | 1.3.6.1.4.1.2011.6.2.1.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Phase BC/B of AC input state. Options: 1. normal(0) - indicates that the Phase BC/B of AC input state is normal 2. belowVoltage(1) - indicates that the Phase BC/B of AC input state is belowVoltage 3. exceedVoltage(2) - indicates that the Phase BC/B of AC input state is exceedVoltage 4. missingPhase(3) - indicates that the Phase BC/B of AC input state is missing-phase 5. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwACVoltageCState | 1.3.6.1.4.1.2011.6.2.1.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Phase CA/C of AC input state. Options: 1. normal(0) - indicates that the Phase CA/C of AC input state is normal 2. belowVoltage(1) - indicates that the Phase CA/C of AC input state is belowVoltage 3. exceedVoltage(2) - indicates that the Phase CA/C of AC input state is exceedVoltage 4. missingPhase(3) - indicates that the Phase CA/C of AC input state is missing-phase 5. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ThwDCOutTable | 1.3.6.1.4.1.2011.6.2.1.3 | NA | ||
table · not-accessible · current DC output table. Through this table, DC output monitoring parameters of 4875 power supply, 4845 power supply, 4810 power supply, 482400 power supply, and 48100 power supply can be set and queried. The indexes of this table are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex, which comes from hwEnvironmentInfoTable, is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. | ||||
| RhwDCOutEntry | 1.3.6.1.4.1.2011.6.2.1.3.1 | NA | ||
row · not-accessible · current DC output table. Through this table, DC output monitoring parameters of 4875 power supply, 4845 power supply, 4810 power supply, 482400 power supply, and 48100 power supply can be set and queried. The indexes of this entry are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex, which comes from hwEnvironmentInfoTable, is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit.
| ||||
| ChwDCVoltageOut | 1.3.6.1.4.1.2011.6.2.1.3.1.1 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current DC voltage output. Unit: mV. invalid: -1
| ||||
| ChwDCCurrentOut | 1.3.6.1.4.1.2011.6.2.1.3.1.2 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current DC current output. Unit: mA
| ||||
| ChwDCVoltageOutHigh | 1.3.6.1.4.1.2011.6.2.1.3.1.3 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current Output DC exceed-voltage alarm point. Default: 58000 Unit: mV
| ||||
| ChwDCVoltageOutLow | 1.3.6.1.4.1.2011.6.2.1.3.1.4 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current Output DC below-voltage alarm point . Default value is 45V. Unit: mV
| ||||
| ChwDCVoltageOutState | 1.3.6.1.4.1.2011.6.2.1.3.1.5 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated DC output voltage status. Options: 1. normal(1) - indicates that the DC output voltage state is normal 2. exceedVoltage(2) - indicates that the DC output voltage state is exceedVoltage 3. belowVoltage(3) - indicates that the DC output voltage state is belowVoltage 4.invalid(-1) - indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwDCCurrentOutHigh | 1.3.6.1.4.1.2011.6.2.1.3.1.6 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current Output DC exceed-current alarm point . Unit: mA
| ||||
| ChwDCCurrentOutLow | 1.3.6.1.4.1.2011.6.2.1.3.1.7 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current Output below-current alarm point . Unit: mA
| ||||
| ChwDCCurrentOutState | 1.3.6.1.4.1.2011.6.2.1.3.1.8 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated DC output current status. Options: 1.normal(1) - indicates that the DC output current state is normal 2.exceedVoltage(2) - indicates that the DC output current state is exceedVoltage 3.belowVoltage(3) - indicates that the DC output current state is belowVoltage 4.invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwDCOutRowStatus | 1.3.6.1.4.1.2011.6.2.1.3.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation | ||||
| ChwDCOutLoadCurrent | 1.3.6.1.4.1.2011.6.2.1.3.1.10 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current Total load current of DC output . Unit: mA. invalid: -1
| ||||
| ChwDCOutLoadTmpHigh | 1.3.6.1.4.1.2011.6.2.1.3.1.11 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current The off protection point under the load temperature, by default, it is 65 degrees centigrade. Unit: 0.01 degree
| ||||
| ChwDCOutRunState | 1.3.6.1.4.1.2011.6.2.1.3.1.12 | Bits | RO | |
column · Bits · read-only · current DC output running status. Options: 1.battery1ChargeCurOver(0) - indicates battery 1 charge over-current 2.battery2ChargeCurOver(1) - indicates battery 2 charge over-current 3.batteryVoltageOver(2) - indicates output over-voltage 4.batteryVoltageLack(3) - indicates battery lack-voltage 5.loadOff(4) - indicates load off twice 6.batteryOff(5) - indictes battery protection (off once) 7.communicationFailure(6) - indicates that the communication fails 8.dcOutManual(7) - indicates DC by manual
| ||||
| ChwDCCommunicationState | 1.3.6.1.4.1.2011.6.2.1.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current DC communication status. Options: 1.normal(0) - indicates that the DC communication state is normal 2.fault(1) - indicates that the DC communication state is fault
| ||||
| ThwLoadinfoTable | 1.3.6.1.4.1.2011.6.2.1.4 | NA | ||
table · not-accessible · current Load information table. Through this table, the load parameter can be set and queried. The indexes of this table are hwEnvEmuIndex, hwPowerIndex, and hwLoadIndex. hwEnvEmuIndex, which comes from hwEnvironmentInfoTable, is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwLoadIndex is the index of the monitored load. | ||||
| RhwLoadinfoEntry | 1.3.6.1.4.1.2011.6.2.1.4.1 | NA | ||
row · not-accessible · current Load information table. Through this table, the load parameter can be set and queried. The indexes of this entry are hwEnvEmuIndex, hwPowerIndex, and hwLoadIndex. hwEnvEmuIndex, which comes from hwEnvironmentInfoTable, is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwLoadIndex is the index of the monitored load.
| ||||
| ChwLoadIndex | 1.3.6.1.4.1.2011.6.2.1.4.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Loop index: usually each DC output loop corresponds to a load. | ||||
| ChwLoadInfoAdminState | 1.3.6.1.4.1.2011.6.2.1.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Load operation. Options: 1. on(1) - indicates that the Load is enabled 2. off(2) - indicates that the Load is disabled 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwLoadInfoOperStatus | 1.3.6.1.4.1.2011.6.2.1.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Status of power supply. Options: 1. normal(1) - indicates that the state of power supply is normal 2. abnormal(2) - indicates that the state of power supply is abnormal 3. stop(3) - indicates that the state of power supply is stopping power supply 4. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwLoadCurrent | 1.3.6.1.4.1.2011.6.2.1.4.1.4 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current Present current . Unit: mA
| ||||
| ChwLoadVoltage | 1.3.6.1.4.1.2011.6.2.1.4.1.5 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current Present voltage . Unit: mV
| ||||
| ChwLoadVoltageHigh | 1.3.6.1.4.1.2011.6.2.1.4.1.6 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current Off voltage (Stop external voltage), in unit of mV, When DC output voltage exceeds the value, the load will be automatically cut off. Unit: mV
| ||||
| ChwLoadLoadName | 1.3.6.1.4.1.2011.6.2.1.4.1.7 | DisplayString | RW | |
column · DisplayString · read-write · current Load name: usually each DC output loop corresponds to a load. | ||||
| ChwLoadInfoRowStatus | 1.3.6.1.4.1.2011.6.2.1.4.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation | ||||
| ChwLoadFuseState | 1.3.6.1.4.1.2011.6.2.1.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Load fuse state, including the auxiliary load fuse. Options: 1. on(1) - indicates that the fuse is connected 2. off(2) - indicates that the fuse is disconnected 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwLoadHoreIndex | 1.3.6.1.4.1.2011.6.2.1.4.1.10 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current load hore index | ||||
| ThwRectifierTable | 1.3.6.1.4.1.2011.6.2.1.5 | NA | ||
table · not-accessible · current Rectifier module table. Through this table, the status information of the rectifier module can be set and queried. The indexes of this table are hwEnvEmuIndex, hwPowerIndex, and hwRectifierIndex. hwEnvEmuIndex, which comes from hwEnvironmentInfoTable, is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwRectifierIndex is the index of the monitored rectifier module under the power supply. | ||||
| RhwRectifierEntry | 1.3.6.1.4.1.2011.6.2.1.5.1 | NA | ||
row · not-accessible · current Rectifier module table. Through this table, the status information of the rectifier module can be set and queried. The indexes of this entry are hwEnvEmuIndex, hwPowerIndex, and hwRectifierIndex. hwEnvEmuIndex, which comes from hwEnvironmentInfoTable, is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwRectifierIndex is the index of the monitored rectifier module under the power supply. | ||||
| ChwRectifierIndex | 1.3.6.1.4.1.2011.6.2.1.5.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Rectifier Module index. There are multiple rectifier modules to a power source. | ||||
| ChwRectifierAdminState | 1.3.6.1.4.1.2011.6.2.1.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Switch operation of rectifier module. Options: 1.on(1) - indicates that the Rectifier module is enabled 2.off(2) - indicates that the Rectifier module is disabled 3.invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwRectifierOperState | 1.3.6.1.4.1.2011.6.2.1.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Present state, 5 and 6 respectively indicates the on/off state of the 48100 power device. Options: 1. normal(1) - indicates that the Rectifier operation state is normal 2. fault(2) - indicates that the Rectifier operation state is fault 3. protect(3) - indicates that the Rectifier operation state is protect 4. communicationFailure(4) - indicates that the Rectifier operation state is communicationFailure 5. on(5) - indicates that the Rectifier operation state is on 6. noConfig(6) - indicates that the Rectifier operation state is not Configured 7. offline(7) - indicates that the Rectifier operation state is offline 8. close(8) - indicates that the Rectifier operation state is closed 9. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwRectifierVoltage | 1.3.6.1.4.1.2011.6.2.1.5.1.4 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current Output voltage . Unit: mV Invalid(-1) indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal.
| ||||
| ChwRectifierCurrent | 1.3.6.1.4.1.2011.6.2.1.5.1.5 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current Output current . Unit: mA Invalid(-1) indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal.
| ||||
| ChwRectifierRowStatus | 1.3.6.1.4.1.2011.6.2.1.5.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation | ||||
| ChwRectifierCurrentLimit | 1.3.6.1.4.1.2011.6.2.1.5.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current current limit switch | ||||
| ChwRectifierRunState | 1.3.6.1.4.1.2011.6.2.1.5.1.8 | Bits | RO | |
column · Bits · read-only · current Running state of rectifier module. Options: 1.rectifierOn(0) - indicates that the module is on 2.averageCharge(1) - indicates that the module is being averagely charged. 3.output(2) - indicates that the module has output 4. isLimit(3) - indicates the current limit switch
| ||||
| ChwRectifierChargeState | 1.3.6.1.4.1.2011.6.2.1.5.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Charging state of rectifier. Options: 1. float(0) - indicates that the Charge state of Rectifier is float 2. average(1) - indicates that the Charge state of Rectifier is average 3. test(2) - indicates that the Charge state of Rectifier is test
| ||||
| NhwBatteryGroup | 1.3.6.1.4.1.2011.6.2.1.6 | |||
| ThwBatteryGroupTable | 1.3.6.1.4.1.2011.6.2.1.6.1 | NA | ||
table · not-accessible · current Basic information table of battery group. The indexes of this table are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex is the index of the monitored unit, and hwPowerIndex is the index of the power supply monitored by the monitoring unit. | ||||
| RhwBatteryGroupEntry | 1.3.6.1.4.1.2011.6.2.1.6.1.1 | NA | ||
row · not-accessible · current Basic information table of battery group. The indexes of this entry are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex is the index of the monitored unit, and hwPowerIndex is the index of the power supply monitored by the monitoring unit.
| ||||
| ChwBatteryGroupCapacity | 1.3.6.1.4.1.2011.6.2.1.6.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Total capacity of the present battery group. Unit: Ah | ||||
| ChwBatteryGroupCapcaityRemain | 1.3.6.1.4.1.2011.6.2.1.6.1.1.2 | Integer32 (-1..100) | RO | |
column · Integer32 (-1..100) · read-only · current Total remain capacity of the present battery group . invalid(-1) indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal. Unit: Ah | ||||
| ChwBatteryGroups | 1.3.6.1.4.1.2011.6.2.1.6.1.1.3 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current Number of battery group | ||||
| ChwBatteryGroupVoltageLow | 1.3.6.1.4.1.2011.6.2.1.6.1.1.4 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current When the voltage of the battery group is lower than the value set, the battery group will no longer supply power. Its unit is mV. Default: 43000 Unit: mV
| ||||
| ChwBatteryGroupChargeLimit | 1.3.6.1.4.1.2011.6.2.1.6.1.1.5 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current Charge limit point quotient, the product of which and the max capacity of the battery group is the max charge current allowed. Default: 15 Unit: percent
| ||||
| ChwBatteryGroupRowStatus | 1.3.6.1.4.1.2011.6.2.1.6.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation | ||||
| ChwBatteryGroupOperStatus | 1.3.6.1.4.1.2011.6.2.1.6.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The State of the battery supply which was connected with Power EMU. To use this function,please confirm that the battery group was connected with Power EMU and the Power EMU state is Normal. When the mains supply is abnormal, the battery group usually supplies power in an emergency. Options: 1.on(1) - indicates that the state of the battery power supply is on 2.off(2) - indicates that the state of the battery power supply is off 3.invalid(-1) - indicates that the device can not get the value,e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwBatteryGroupVoltageHigh | 1.3.6.1.4.1.2011.6.2.1.6.1.1.8 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current When the voltage of the battery group is higher than the value set, the battery group will no longer supply power. Its unit is mV. Default: 43000 Unit: mV
| ||||
| ChwBatteryGroupTwiceOffVoltage | 1.3.6.1.4.1.2011.6.2.1.6.1.1.9 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current The twice off protection voltage of the battery group. Its unit is mV. Default: 44000 Unit: mV
| ||||
| ChwBatteryGroupProtectVoltage | 1.3.6.1.4.1.2011.6.2.1.6.1.1.10 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current The first off protection voltage of the battery, whose default is 43V. Default: 43000 Unit: mV
| ||||
| ChwBatteryGroupTmpOffHigh | 1.3.6.1.4.1.2011.6.2.1.6.1.1.11 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current The high temperature off protection point of the battery group, whose default is 50 degrees centigrade. Unit: 0.01 degree
| ||||
| ChwBatteryInstallTime | 1.3.6.1.4.1.2011.6.2.1.6.1.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The installing date of battery group. | ||||
| ChwBatteryGroupBomCode | 1.3.6.1.4.1.2011.6.2.1.6.1.1.13 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current The BOM code of battery. Invalid: null string. | ||||
| ChwBatteryGroupType | 1.3.6.1.4.1.2011.6.2.1.6.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current The type of lead-acid battery. 1: general. 2: tcbc. 3: tcbb.
| ||||
| ChwLiBatteryGroupChargeLimit | 1.3.6.1.4.1.2011.6.2.1.6.1.1.15 | Integer32 (-1 | 50..1050) | RW | |
column · Integer32 (-1 | 50..1050) · read-write · current The charge limit quotiety of the LiBattery. SNMP uses it which has been enlarged 1000 by host. user uses it which has been lessened 1000 by SNMP. Default: 1050. The invalid value -1 indicates that the device can not get the value, e.g. the EMU does not support this operation. | ||||
| ThwChargeTable | 1.3.6.1.4.1.2011.6.2.1.6.2 | NA | ||
table · not-accessible · current Charge management table. Through this table, the charging parameter of the battery can be set and queried. The indexes of this table are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex is the index of the monitored unit, and hwPowerIndex is the index of the power supply monitored by the monitoring unit. | ||||
| RhwChargeEntry | 1.3.6.1.4.1.2011.6.2.1.6.2.1 | NA | ||
row · not-accessible · current Charge management table. Through this table, the charging parameter of the battery can be set and queried. The indexes of this entry are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex is the index of the monitored unit, and hwPowerIndex is the index of the power supply monitored by the monitoring unit.
| ||||
| ChwChargeAdminStatus | 1.3.6.1.4.1.2011.6.2.1.6.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Charge management mode. Options: 1. average(1) - indicates that the charge management mode is average charge 2. float(2) - indicates that the charge management mode is float charge 3. auto(3) - indicates that the charge management mode is auto-control charge 4. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwChargeOperStatus | 1.3.6.1.4.1.2011.6.2.1.6.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Charge operation status. Options: 1. average(1) - indicates that the charge operation state is average charge 2. float(2) - indicates that the charge operation state is float charge 3. full(3) - indicates that the charge operation state is full 4. noCharge(4) - indicates that there is no charge in operation 5. discharge(5) - indicates that there is discharge in operation 6. sleep(6) - indicates that the charge operation state is sleep 7. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwAverageChargeVoltage | 1.3.6.1.4.1.2011.6.2.1.6.2.1.3 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current Voltage value of average charge, in unit of mV. Default: 56500 Unit: mV
| ||||
| ChwFloatChargeVoltage | 1.3.6.1.4.1.2011.6.2.1.6.2.1.4 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current Voltage value of float charge . Default: 53500 Unit: mV
| ||||
| ChwChargeControlRowStatus | 1.3.6.1.4.1.2011.6.2.1.6.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation | ||||
| ChwAverageChargeTime | 1.3.6.1.4.1.2011.6.2.1.6.2.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Timing average charge time interval, effective range is 190 days. Default :value is 60 days Unit: day
| ||||
| ChwBatteryTmpRedeemingQuotiety | 1.3.6.1.4.1.2011.6.2.1.6.2.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Temperature redeeming quotient, used to set the co-relation between the float charge voltage and the battery temperature. It means How much will the float charge voltage decrease with the increasing of every degree centigrade of the battery temperature. The unit is mV. Specific value is determined by the redeem feature curve of floating charge for the battery group used. Default value is 100mV | ||||
| ThwBatteryTable | 1.3.6.1.4.1.2011.6.2.1.6.3 | NA | ||
table · not-accessible · current Battery group state table. Through this table, the status parameter of a battery group can be set and queried. The indexes of this table are hwEnvEmuIndex, hwPowerIndex, and hwBatteryIndex. hwEnvEmuIndex is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwBatteryIndex is the index of the monitored battery group. | ||||
| RhwBatteryEntry | 1.3.6.1.4.1.2011.6.2.1.6.3.1 | NA | ||
row · not-accessible · current Battery group state table. Through this table, the status parameter of a battery group can be set and queried. The indexes of this entry are hwEnvEmuIndex, hwPowerIndex, and hwBatteryIndex. hwEnvEmuIndex is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwBatteryIndex is the index of the monitored battery group. | ||||
| ChwBatteryIndex | 1.3.6.1.4.1.2011.6.2.1.6.3.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Battery group loop index | ||||
| ChwBatteryCapacity | 1.3.6.1.4.1.2011.6.2.1.6.3.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The permitted max battery capacity of the battery group loop charge. Unit: Ah Invalid(-1) indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal. | ||||
| ChwBatteryLoopState | 1.3.6.1.4.1.2011.6.2.1.6.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The battery group present status. Options: 1. on(1) - indicates that the present state of battery group is on 2. off(2) - indicates that the present state of battery group is off 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwBatteryVoltage | 1.3.6.1.4.1.2011.6.2.1.6.3.1.4 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current The loop voltage of the battery group. Unit: mV invalid: -1
| ||||
| ChwBatteryOperStatus | 1.3.6.1.4.1.2011.6.2.1.6.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The present state of the battery group loop. Options: 1. charge(1) - indicates that the present state of the battery group loop is charge 2. discharge(2) - indicates that the present state of the battery group loop is discharge 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwBatteryCurrent | 1.3.6.1.4.1.2011.6.2.1.6.3.1.6 | MeasuresRange | RO | |
column · MeasuresRange · read-only · current Present current . Unit: mA invalid: -1
| ||||
| ChwBatteryTemperature | 1.3.6.1.4.1.2011.6.2.1.6.3.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The loop temperature of the battery group. Unit: degree Invaild:2147483647(0X7FFFFFFF)
| ||||
| ChwBatteryRowStatus | 1.3.6.1.4.1.2011.6.2.1.6.3.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation | ||||
| ChwBatteryCurrentHigh | 1.3.6.1.4.1.2011.6.2.1.6.3.1.9 | MeasuresRange | RW | |
column · MeasuresRange · read-write · current The over-current alarm point of the battery group. Unit: mA
| ||||
| ChwBatteryFuseState | 1.3.6.1.4.1.2011.6.2.1.6.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Battery fuse state. Options: 1. on(1) - indicates that the fuse is connected 2. off(2) - indicates that the fuse is disconnected 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwBatteryContactState | 1.3.6.1.4.1.2011.6.2.1.6.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the battery contactor. Options: 1. on(1) - indicates that the contactor is connected 2. off(2) - indicates that the contactor is disconnected 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwBatteryRemainCapacity | 1.3.6.1.4.1.2011.6.2.1.6.3.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Remain capacity of the battery, invalid(-1) | ||||
| ChwBatteryProtectState | 1.3.6.1.4.1.2011.6.2.1.6.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Protection status of the battery. Options: 1. normal(1) - indicates that the Protection status of the battery is normal 2. overtemperature(2) - indicates that the Protection status of the battery is overtemperature 3. overCurrent(3) - indicates that the Protection status of the battery is overCurrent
| ||||
| ChwBatteryVoltageState | 1.3.6.1.4.1.2011.6.2.1.6.3.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Voltage state of Battery. Options: 1. normal(1) - indicates that Voltage state of Battery is normal 2. exceedVoltage(2) - indicates that Voltage state of Battery is exceedVoltage 3. belowVoltage(3) - indicates that Voltage state of Battery is belowVoltage
| ||||
| ChwBatteryHardwareState | 1.3.6.1.4.1.2011.6.2.1.6.3.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Hardware State of Battery. Options: 1. normal(1) - indicates that the hardware state of Battery is normal 2. fault(2) - indicates that the hardware state of Battery is fault
| ||||
| ChwBatteryLowTemperature | 1.3.6.1.4.1.2011.6.2.1.6.3.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The lowest loop temperature of the battery group. Unit: degree Invaild:2147483647(0X7FFFFFFF)
| ||||
| ChwBatteryAntiTheftSwitch | 1.3.6.1.4.1.2011.6.2.1.6.3.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Anti-theft switch of Battery. Options: 1. disable(1) - indicates that the anti-theft state of Battery is disabled 2. enable(2) - indicates that the anti-theft state of Battery is enabled 3. invalid(-1) - indicates that the device can not get the value, e.g. the EMU does not support this operation
| ||||
| ChwBatteryAntiTheftTimeout | 1.3.6.1.4.1.2011.6.2.1.6.3.1.18 | Integer32 (-1 | 8..720) | RW | |
column · Integer32 (-1 | 8..720) · read-write · current The anti-theft timeout time of battery. The invalid value -1 indicates that the device can not get the value, e.g. the EMU does not support this operation.
| ||||
| ChwBatterySequence | 1.3.6.1.4.1.2011.6.2.1.6.3.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current The sequence of LiBattery. | ||||
| ChwBatteryAddress | 1.3.6.1.4.1.2011.6.2.1.6.3.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current The address of LiBattery which corresponds to the subnode of LiBattery. | ||||
| ChwBatteryHeaterState | 1.3.6.1.4.1.2011.6.2.1.6.3.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current The state of battery heater.
| ||||
| ChwBatteryHealthState | 1.3.6.1.4.1.2011.6.2.1.6.3.1.22 | Integer32 (-1..100) | RO | |
column · Integer32 (-1..100) · read-only · current The health state of battery. Unit:% invalid:-1
| ||||
| ThwBatteryTestTable | 1.3.6.1.4.1.2011.6.2.1.6.4 | NA | ||
table · not-accessible · current Battery test table. The indexes of this table are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex is the index of the monitored unit, and hwPowerIndex is the index of the power supply monitored by the monitoring unit. | ||||
| RhwBatteryTestEntry | 1.3.6.1.4.1.2011.6.2.1.6.4.1 | NA | ||
row · not-accessible · current Battery test table. The indexes of this entry are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex is the index of the monitored unit, and hwPowerIndex is the index of the power supply monitored by the monitoring unit.
| ||||
| ChwBatteryTestAdminStatus | 1.3.6.1.4.1.2011.6.2.1.6.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Battery test admin status. Options: 1. start(1) - indicates that the Battery starts testing 2. terminate(2) - indicates that the Battery terminates testing 3. enableAutoTest(3) - indicates that the Battery enables auto test function 4. disableAutoTest(4) - indicates that the Battery disables auto test function 5. timeautoTest(5) - indicates that the Battery enable timing auto test function 6. offautoTest(6) - indicates that the Battery enable off auto test function 7. timeoffautoTest(7) - indicates that the Battery enable timing+off auto test
| ||||
| ChwBatteryTestAutoDischargePeriod | 1.3.6.1.4.1.2011.6.2.1.6.4.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Auto discharge test period. Effective range is 30 -240 days. Default: 120 Unit: day
| ||||
| ChwBatteryTestResult | 1.3.6.1.4.1.2011.6.2.1.6.4.1.3 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete Test result: Options: 1. testing(1) - indicates that the Battery test is in operation 2. complete(2) - indicates that the Battery test is completed normally 3. alarmTerminated(3) - indicates that the Battery test is stopped by alarms 4. hostTerminated(4) - indicates that the Battery test is stopped by the host 5. overtimeTerminated(5) - indicates that the Battery test is stopped because of over time 6. normal(6) - indicates that the Battery test is not started 7. supplyRecoverAutotestTerminated(7) - indicates that the Battery test is stopped because of supply recover
| ||||
| ChwBatteryTestStartTime | 1.3.6.1.4.1.2011.6.2.1.6.4.1.4 | DateAndTime | RO | obsolete |
column · DateAndTime · read-only · obsolete Time of starting test | ||||
| ChwBatteryTestDuration | 1.3.6.1.4.1.2011.6.2.1.6.4.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Battery discharge test duration. Effective range is 1-100 hours. Default :value is 10 hours Unit: hour
| ||||
| ChwBatteryTestTerminateVoltage | 1.3.6.1.4.1.2011.6.2.1.6.4.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Battery discharge test end voltage. Effective range (DC lack alarm voltage+0.5V-voltage of floating charge). Default: 45600 Unit: mV
| ||||
| ChwBatteryTestTotalDischargeAH | 1.3.6.1.4.1.2011.6.2.1.6.4.1.7 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Total discharge AH. Unit: mAH
| ||||
| ChwBatteryTestOperStatus | 1.3.6.1.4.1.2011.6.2.1.6.4.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Battery discharge test operate status. Options: 1. autoTestPermit(1) - indicates that auto discharge test is enabled 2. autoTestForbid(2) - indicates that auto discharge test is disabled 3. timeautoTestPermit(3) - indicates that timing auto discharge test is enabled 4. offautoTestPermit(4) - indicates that off auto discharge test is enabled 5. timeoffautoTestPermit(5) - indicates that timing-off auto discharge test is enabled
| ||||
| ChwBatteryTestPhase | 1.3.6.1.4.1.2011.6.2.1.6.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Battery test phase. Options: 1. charge(1) - indicates the batter test phase is charge 2. discharge(2) - indicates the batter test phase is discharge 3. record(3) - indicates the power equipment recording test result 4. finish(4) - indicates that the discharge is complete 5.waitingfordischarge(5) - indicates that preparation is ready for discharge command
| ||||
| ChwBatteryTestStartHour | 1.3.6.1.4.1.2011.6.2.1.6.4.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Discharge start time. Effective range is 0 23 Default: 0 Unit: hour
| ||||
| ChwBatteryTestAlarmThreshold | 1.3.6.1.4.1.2011.6.2.1.6.4.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current The battery discharge test alarm threshold in ratio of the range:1~79.
| ||||
| ThwBatteryLogTestTable | 1.3.6.1.4.1.2011.6.2.1.6.5 | NA | ||
table · not-accessible · current Battery test result table, Through this table, the discharging test result of the battery group can be saved and queried. The indexes of this table are hwEnvEmuIndex, hwPowerIndex, and hwBatteryLogTestIndex. hwEnvEmuIndex is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwBatteryLogTestIndex is the index of the monitored battery. | ||||
| RhwBatteryLogTestEntry | 1.3.6.1.4.1.2011.6.2.1.6.5.1 | NA | ||
row · not-accessible · current Battery test result table, Through this table, the discharging test result of the battery group can be saved and queried. The indexes of this entry are hwEnvEmuIndex, hwPowerIndex, and hwBatteryLogTestIndex. hwEnvEmuIndex is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwBatteryLogTestIndex is the index of the monitored battery. | ||||
| ChwBatteryLogTestIndex | 1.3.6.1.4.1.2011.6.2.1.6.5.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Battery discharge test result index | ||||
| ChwBatteryLogTestStartTime | 1.3.6.1.4.1.2011.6.2.1.6.5.1.2 | DateAndTime | RO | |
column · DateAndTime · read-only · current Battery discharge test start time | ||||
| ChwBatteryLogTestDischargeDuration | 1.3.6.1.4.1.2011.6.2.1.6.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Duration of discharge. Unit: minute
| ||||
| ChwBatteryLogTestTerminateVoltage | 1.3.6.1.4.1.2011.6.2.1.6.5.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current End voltage of battery discharge test . Unit: mV
| ||||
| ChwBatteryLogTestBatteryStatus | 1.3.6.1.4.1.2011.6.2.1.6.5.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Battery status. Options: 1. expectant(1) - indicates the batter test state is expectant 2. unexpected(2) - indicates the batter test state is unexpected 3. unknown(3) - indicates the batter test state is unknown
| ||||
| ChwBatteryLogTestTotalDischargeAH | 1.3.6.1.4.1.2011.6.2.1.6.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Discharge cumulate AH. Unit: mAH
| ||||
| ChwBatteryLogTestFinish | 1.3.6.1.4.1.2011.6.2.1.6.5.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Battery Test result. Options: 1. testing(1) - indicates that it is during testing 2. completed(2) - indicates that the test is completed normally 3. alarmTerminated(3) - indicates that the test is stopped by alarms 4. hostTerminated(4) - indicates that the test is stopped by the host 5. overtimeTerminated(5) - indicates that the test is stopped because of over 100 hours 6. notTest(6) - indicates that the test is not started 7. supplyRecoverAutotestTerminated(7) - indicates that the test is stopped because of supply recover
| ||||
| ChwBatteryLogTestEfficiency | 1.3.6.1.4.1.2011.6.2.1.6.5.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The information of battery test efficiency.
| ||||
| ChwBatteryLogTestBatteryTemperature | 1.3.6.1.4.1.2011.6.2.1.6.5.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Battery discharge test end Temperature. Unit: 0.01 Degree Invaild: 0X7FFFFFFF
| ||||
| ChwBatteryLogTestBatteryCurrent | 1.3.6.1.4.1.2011.6.2.1.6.5.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Battery discharge test average Current. Unit: mA
| ||||
| ThwBatteryCellTable | 1.3.6.1.4.1.2011.6.2.1.6.6 | NA | ||
table · not-accessible · current The state of battery cell. The indexes of this entry are hwEnvEmuIndex, hwPowerIndex, and hwBatteryCellIndex. hwEnvEmuIndex is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwBatteryCellIndex is the index of the battery cell. | ||||
| RhwBatteryCellEntry | 1.3.6.1.4.1.2011.6.2.1.6.6.1 | NA | ||
row · not-accessible · current The state of battery cell. The indexes of this entry are hwEnvEmuIndex, hwPowerIndex, and hwBatteryCellIndex. hwEnvEmuIndex is the index of the monitored unit. hwPowerIndex is the index of the power supply monitored by the monitoring unit. hwBatteryCellIndex is the index of battery cell. | ||||
| ChwBatteryCellIndex | 1.3.6.1.4.1.2011.6.2.1.6.6.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current The index of battery cell. | ||||
| ChwBatteryCellTemperature | 1.3.6.1.4.1.2011.6.2.1.6.6.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The temperature of battery cell. Unit: C Non-value: 0x7FFFFFFF
| ||||
| ChwBatteryCellVoltage | 1.3.6.1.4.1.2011.6.2.1.6.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The voltage of battery cell. Unit: mV Non-value: -1
| ||||
| ThwRemoteProvidePowerInfoTable | 1.3.6.1.4.1.2011.6.2.1.7 | NA | ||
table · not-accessible · current Remote provide power basic information table. The indexes of this table are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex is the index of the monitored unit, and hwPowerIndex is the index of the power supply monitored by the monitoring unit. | ||||
| RhwRemoteProvidePowerInfoEntry | 1.3.6.1.4.1.2011.6.2.1.7.1 | NA | ||
row · not-accessible · current Remote provide power basic information table. The indexes of this entry are hwEnvEmuIndex and hwPowerIndex. hwEnvEmuIndex is the index of the monitored unit, and hwPowerIndex is the index of the power supply monitored by the monitoring unit.
| ||||
| ChwPowerCentralState | 1.3.6.1.4.1.2011.6.2.1.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current State of the central module. Options: 1. normal(1) - indicates the normal state 2. temOver(2) - indicates the over-temperature
| ||||
| ChwPowerCentralDCInPutState | 1.3.6.1.4.1.2011.6.2.1.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current State of central module DC input: Options: 1.normal(1) - indicates the normal state 2.lack(2) - indicates the voltage underflow 3.over(3) - indicates the voltage overflow
| ||||
| ChwPowerCentralDCOutputState | 1.3.6.1.4.1.2011.6.2.1.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current State of central module DC output. Options: 1. normal(1) - indicates the normal state 2. volLack(2) - indicates the voltage underflow 3. volOver(3) - indicates the voltage overflow 4. loadOver(4) - indicates the over-loading 5. shortCircuit(5) - indicates the short circuit 6. noLoad(6) - indicates no load
| ||||
| ChwPowerCentralDCOutputMode | 1.3.6.1.4.1.2011.6.2.1.7.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Mode of central module DC output. Options: 1. highVolMode(1) - indicates the high voltage output mode 2. lowVolMode(2) - indicates the low voltage output mode
| ||||
| ChwPowerRemoteCommState | 1.3.6.1.4.1.2011.6.2.1.7.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Remote power module communications state. Options: 1. normal(1) - indicates the normal state 2. revfault(2) - indicates the receiving of fault 3. sendfault(3) - indicates the sending of fault
| ||||
| ChwPowerRemoteDCInputState | 1.3.6.1.4.1.2011.6.2.1.7.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current State of remote module DC input. Options: 1. normal(1) - indicates the normal state 2. lack(2) - indicates that the voltage is underflow
| ||||
| ChwPowerRemoteLineCurState | 1.3.6.1.4.1.2011.6.2.1.7.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current state of line between central and remote module. Options: 1.normal(1) - indicates the normal state 2.cablejoining(2) - indicates the cable joining 3.curLeakage(3) - indicates the cur Leakage 4.curOver(4) - indicates the cur Over
| ||||
| ChwPowerRemotePowerState | 1.3.6.1.4.1.2011.6.2.1.7.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current state of remote UA60 power. Options: 1. normal(1) - indicates the normal state 2. fault(2) - indicates the faulty state
| ||||
| ChwPowerRemoteLineState | 1.3.6.1.4.1.2011.6.2.1.7.1.9 | Bits | RW | |
column · Bits · read-write · current State of line U1. Options: 1. u1state(0) - indicates the power remote line state is u1 state 2. u2state(1) - indicates the power remote line state is u2 state 3. u3state(2) - indicates the power remote line state is u3 state 4. u4state(3) - indicates the power remote line state is u4 state 5. a1state(4) - indicates the power remote line state is a1 state 6. a2state(5) - indicates the power remote line state is a2 state 7. a3state(6) - indicates the power remote line state is a3 state 8. a4state(7) - indicates the power remote line state is a4 state
| ||||
| ChwPowerCentralLoadState | 1.3.6.1.4.1.2011.6.2.1.7.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current state of central load. Options: 1. normal(1) - indicates the normal state 2. overload(2) - indicates overload 3. nonload(3) - indicates non-load
| ||||
| ThwACInfomationTable | 1.3.6.1.4.1.2011.6.2.1.8 | NA | ||
table · not-accessible · current AC infomation table. The table is not supported. The indexes of this table are hwEnvEmuIndex and hwPowerIndex. | ||||
| RhwACInfomationEntry | 1.3.6.1.4.1.2011.6.2.1.8.1 | NA | ||
row · not-accessible · current AC infomation table. The table is not supported. The indexes of this entry are hwEnvEmuIndex and hwPowerIndex.
| ||||
| ChwACInfoCommState | 1.3.6.1.4.1.2011.6.2.1.8.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current communication state of AC input module. The node is not supported. Options: 1. normal(0) - indicates the communication state of AC is normal 2. fault(1) - indicates the communication state of AC is fault
| ||||
| ChwACInfoThunderState | 1.3.6.1.4.1.2011.6.2.1.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Thunder's state. The node is not supported. Options: 1. normal(0) - indicates the state of Thunder is normal 2. fault(1) - indicates the state of Thunder is fault
| ||||
| ChwACInfoCurrentLoop | 1.3.6.1.4.1.2011.6.2.1.8.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Current AC input working loop. The leaf is not supported. | ||||
| ChwACInfoMCBTrigger | 1.3.6.1.4.1.2011.6.2.1.8.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current AC input MCB trigger state. The leaf is not supported. Options: 1. normal(0) - indicates the AC input MCB trigger state is normal 2. breakDown(1)- indicates the AC input MCB trigger state is break-down
| ||||
| ChwACInfoFrequency | 1.3.6.1.4.1.2011.6.2.1.8.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The infomation of AC input frequency. This leaf is not supported. Unit: HZ
| ||||
| ChwACInfoRowStatus | 1.3.6.1.4.1.2011.6.2.1.8.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation The leaf is not supported. | ||||
| NhwPowerMibTrap | 1.3.6.1.4.1.2011.6.2.2 | |||
| NhwPowerTrapOid | 1.3.6.1.4.1.2011.6.2.2.1 | |||
| NhwPowerTrapsDefine | 1.3.6.1.4.1.2011.6.2.2.2 | |||
| NhwPowerTraps | 1.3.6.1.4.1.2011.6.2.2.2.0 | |||
| !powerConnFaultAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.1 | |||
notification · current This trap message is reported when the communication between the power module and the monitoring board is fault.
| ||||
| !powerConnFaultAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.2 | |||
notification · current This trap message is reported when the communication between the power module and the monitoring board resumes.
| ||||
| !acInputVoltageAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.3 | |||
notification · current This trap message is reported when there is a exception of AC input voltage.
| ||||
| !acInputVoltageAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.4 | |||
notification · current This trap message is reported when the state of AC input voltage resumes.
| ||||
| !acInputVoltageHighAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.5 | |||
notification · current This trap message is reported when the input voltage is too high.
| ||||
| !acInputVoltageHighAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.6 | |||
notification · current This trap message is reported when the input voltage resumes to the normal range from a high value.
| ||||
| !acInputVoltageLowAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.7 | |||
notification · current This trap message is reported when the input voltage is too low.
| ||||
| !acInputVoltageLowAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.8 | |||
notification · current This trap message is reported when the input voltage resumes to the normal range from a low value.
| ||||
| !dcOutputVoltageHighAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.9 | |||
notification · current This trap message is reported when the output voltage is too high.
| ||||
| !dcOutputVoltageHighAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.10 | |||
notification · current This trap message is reported when the output voltage resumes to the normal range from a high value.
| ||||
| !dcOutputCurrentHighAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.11 | |||
notification · current This trap message is reported when the output current is too high.
| ||||
| !dcOutputCurrentHighAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.12 | |||
notification · current This trap message is reported when the output current resumes to the normal range from a high value.
| ||||
| !dcOutputVoltageLowAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.13 | |||
notification · current This trap message is reported when the output voltage is too low.
| ||||
| !dcOutputVoltageLowAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.14 | |||
notification · current This trap message is reported when the output voltage resumes to the normal range from a low value.
| ||||
| !dcOutputCurrentLowAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.15 | |||
notification · current This trap message is reported when the output current is too low.
| ||||
| !dcOutputCurrentLowAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.16 | |||
notification · current This trap message is reported when the output current resumes to the normal range from a low value.
| ||||
| !overLoadPowerAbnormalAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.17 | |||
notification · current This trap message is reported when the state of load power is abnormal.
| ||||
| !overLoadPowerAbnormalAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.18 | |||
notification · current This trap message is reported when the state of load power recovers to normal.
| ||||
| !overBattPowerOffAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.19 | |||
notification · current This trap message is reported when the battery is powered off.
| ||||
| !overBattPowerOffAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.20 | |||
notification · current This trap message is reported when the battery is powered on.
| ||||
| !overLoadPowerOffAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.21 | |||
notification · current This trap message is reported when the loadpower is powered off.
| ||||
| !overLoadPowerOffAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.22 | |||
notification · current This trap message is reported when the loadpower is powered on.
| ||||
| !acMainsSupplyAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.23 | |||
notification · current This trap message is reported when the AC mains supply is abnormal.
| ||||
| !acMainsSupplyAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.24 | |||
notification · current This trap message is reported when the AC mains supply recovers to normal.
| ||||
| !batteryLoopAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.25 | |||
notification · current This trap message is reported when the loop of battery group disconnects.
| ||||
| !batteryLoopAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.26 | |||
notification · current This trap message is reported when the loop of battery group connects.
| ||||
| !batteryFuseAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.27 | |||
notification · current This trap message is reported when the fuse of battery group disconnects.
| ||||
| !batteryFuseAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.28 | |||
notification · current This trap message is reported when the fuse of battery group connects.
| ||||
| !batteryContachAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.29 | |||
notification · current This trap message is reported when the contactor of battery group disconnects.
| ||||
| !batteryContachAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.30 | |||
notification · current This trap message is reported when the contactor of battery group connects.
| ||||
| !userModuleOffAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.31 | |||
notification · current This trap message is reported when the user module is powered off.
| ||||
| !userModuleOffAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.32 | |||
notification · current This trap message is reported when the user module is powered on.
| ||||
| !transferModuleOffAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.33 | |||
notification · current This trap message is reported when the transfer module is powered off.
| ||||
| !transferModuleOffAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.34 | |||
notification · current This trap message is reported when the transfer module is powered on.
| ||||
| !userModuleSwitchAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.35 | |||
notification · current This trap message is reported when the user module is switched off.
| ||||
| !transferModuleSwitchAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.37 | |||
notification · current This trap message is reported when the transfer module is switched off.
| ||||
| !loadFuseAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.39 | |||
notification · current This trap message is reported when the load fuse is abnormal.
| ||||
| !loadFuseAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.40 | |||
notification · current This trap message is reported when the load fuse resumes.
| ||||
| !chargeCtrlStateAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.41 | |||
notification · current This trap message is reported when the control state of average or floating charge converts.
| ||||
| !chargeModeAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.42 | |||
notification · current This trap message is reported when the charge state converts.
| ||||
| !acCommFailAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.43 | |||
notification · current This trap message is reported when the AC panel communication fails.
| ||||
| !acCommFailAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.44 | |||
notification · current This trap message is reported when the AC panel communication resumes.
| ||||
| !batteryChargeOverAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.45 | |||
notification · current This trap message is reported when the Over-current of battery group happens.
| ||||
| !batteryChargeOverAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.46 | |||
notification · current OThis trap message is reported when the Over-current of battery group resumes.
| ||||
| !batteryVoltageLackAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.47 | |||
notification · current This trap message is reported when the voltage of battery group lacks.
| ||||
| !batteryVoltageLackAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.48 | |||
notification · current This trap message is reported when the voltage of battery group recovers from lack.
| ||||
| !loadTwiceOffAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.49 | |||
notification · current This trap message is reported when the load is powered off twice.
| ||||
| !loadTwiceOffAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.50 | |||
notification · current This trap message is reported when the load recovers from powering off twice.
| ||||
| !loadOnceOffAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.51 | |||
notification · current This trap message is reported when the load is powered off once.
| ||||
| !loadOnceOffAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.52 | |||
notification · current This trap message is reported when the load recovers from powering off once.
| ||||
| !acInputPowerOffAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.53 | |||
notification · current This trap message is reported when the AC input is powered off.
| ||||
| !acInputPowerOffAlarmResume | 1.3.6.1.4.1.2011.6.2.2.2.0.54 | |||
notification · current This trap message is reported when the AC input power is powered off.
| ||||
| !acInputLoopSwtichAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.55 | |||
notification · current This trap message is reported when the AC input loop switches to another one.
| ||||
| !batteryDischargeTestStartAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.56 | |||
notification · current This trap message is reported when the battery discharge test starts.
| ||||
| !batteryDischargeTestStopAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.57 | |||
notification · current This trap message is reported when the battery discharge test stops.
| ||||
| !powerProtectAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.58 | |||
notification · current This trap message is reported when the power protection function is enbaled.
| ||||
| !powerUndoProtectAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.59 | |||
notification · current This trap message is reported when the power protection function is disabled.
| ||||
| !powerCentralOutputModeSwtichAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.60 | |||
notification · current This trap message is reported when the central output mode swtiches to another one.
| ||||
| !powerCentralTempretaureAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.61 | |||
notification · current This trap message is reported when the central tempretaure is abnormal.
| ||||
| !powerCentralInputAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.62 | |||
notification · current This trap message is reported when the central input voltage is abnormal.
| ||||
| !powerCentralOutputAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.63 | |||
notification · current This trap message is reported when the central output voltage is abnormal.
| ||||
| !powerRemoteCommFaultAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.64 | |||
notification · current This trap message is reported when the communiction between the remote and central fails.
| ||||
| !powerRemoteVoltageAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.65 | |||
notification · current This trap message is reported when the remote voltage is abnormal.
| ||||
| !powerLineAlarm | 1.3.6.1.4.1.2011.6.2.2.2.0.66 | |||
notification · current This trap message is reported when the power line is abnormal.
| ||||
| !powerRemotePowerAlarm1 | 1.3.6.1.4.1.2011.6.2.2.2.0.67 | |||
notification · current This trap message is reported when the remote power is abnormal.
| ||||
| !powerRemotePowerAlarm2 | 1.3.6.1.4.1.2011.6.2.2.2.0.68 | |||
notification · current This trap message is reported when the Line UA is abnormal.
| ||||
| !powerRemotePowerAlarm3 | 1.3.6.1.4.1.2011.6.2.2.2.0.69 | |||
notification · current This trap message is reported when the Central load is abnormal.
| ||||
| NpowerConformance | 1.3.6.1.4.1.2011.6.2.3 | |||
| NpowerCompliances | 1.3.6.1.4.1.2011.6.2.3.1 | |||
| NpowerGroups | 1.3.6.1.4.1.2011.6.2.3.2 | |||
| NhwEnvironPowerTraps | 1.3.6.1.4.1.2011.6.2.4 | |||
| NhwEnvironPowerCommonTraps | 1.3.6.1.4.1.2011.6.2.4.1 | |||
| NhwEnvironPowerAlarmTraps | 1.3.6.1.4.1.2011.6.2.4.2 | |||
| NhwEnvironPowerAlarmTrapsPrefix | 1.3.6.1.4.1.2011.6.2.4.2.0 | |||
| !hwEmmPowerBattaryTestStartTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.1 | |||
notification · current The agent generates this trap when the power device battary discharge test starts.
| ||||
| !hwEmmPowerBattaryTestStopTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.2 | |||
notification · current The agent generates this trap when the power device battary discharge test ends. | ||||
| !hwEmmPowerAcvolFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.3 | |||
notification · current The agent generates this trap when the power device AC input voltage is abnormal. | ||||
| !hwEmmPowerAcvolRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.4 | |||
notification · current The agent generates this trap when the power device AC input voltage recovers. | ||||
| !hwEmmPowerDcvolFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.5 | |||
notification · current The agent generates this trap when the power device DC output voltage is abnormal.
| ||||
| !hwEmmPowerDcvolRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.6 | |||
notification · current The agent generates this trap when the power device DC output voltage recovers.
| ||||
| !hwEmmPowerBattloopFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.7 | |||
notification · current The agent generates this trap when the power device the battery loop is broken. In this case, the function of he backup power is lost. | ||||
| !hwEmmPowerBattloopRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.8 | |||
notification · current The agent generates this trap when the power device battery loop recovers. | ||||
| !hwEmmPowerLoadfuseFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.9 | |||
notification · current The agent generates this trap when the fuse of the power device is broken. In this case, the device is powered off. | ||||
| !hwEmmPowerLoadfuseRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.10 | |||
notification · current The agent generates this trap when the fuse of the power device recovers. | ||||
| !hwEmmPowerRectifierFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.11 | |||
notification · current The agent generates this trap when the rectifier module of the power device is abnormal and the spully power may decrease. | ||||
| !hwEmmPowerRectifierRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.12 | |||
notification · current The agent generates this trap when the rectifier module of the power device recovers. | ||||
| !hwEmmDigMainsupplyFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.13 | |||
notification · current The agent generates this trap when the main supply digital is faulty.
| ||||
| !hwEmmDigMainsupplyRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.14 | |||
notification · current The agent generates this trap when the main supply digital recovers.
| ||||
| !hwEmmPowerBatteryOffTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.15 | |||
notification · current The agent generates this trap when the power of battary is off.
| ||||
| !hwEmmBatt1TempFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.16 | |||
notification · current The agent generates this trap when the
battery group 1 temperature sensor fault
occurs.
| ||||
| !hwEmmBatt1TempRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.17 | |||
notification · current The agent generates this trap when the battery group 1 temperature sensor fault recovers.
| ||||
| !hwEmmEnviHumFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.18 | |||
notification · current The agent generates this trap when the environment humidity sensor fault occurs.
| ||||
| !hwEmmEnviHumRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.19 | |||
notification · current The agent generates this trap when the environment humidity sensor fault recovers.
| ||||
| !hwEmmEnvi1TempFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.20 | |||
notification · current The agent generates this trap when the environment 1 temperature sensor fault occurs.
| ||||
| !hwEmmEnvi1TempRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.21 | |||
notification · current The agent generates this trap when the environment 1 temperature sensor fault recovers.
| ||||
| !hwEmmBattTemFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.22 | |||
notification · current The agent generates this trap when the battery temperature out of normal range.
| ||||
| !hwEmmBattTemRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.23 | |||
notification · current The agent generates this trap when the battery temperature recovers to normal range.
| ||||
| !hwEmmPowerBatteryOffRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.24 | |||
notification · current The agent generates this trap when the power of battary recovers to on state.
| ||||
| !hwEmmPowerBatteryUnDetectTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.25 | |||
notification · current The agent generates this trap when the one or more batteries are not detected.
| ||||
| !hwEmmPowerBatteryDetectRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.26 | |||
notification · current The agent generates this trap when the batteries recover.
| ||||
| !hwPowerModuleMismatchTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.27 | |||
notification · current The agent generates this trap when the the power supply system detects mismatched power module .
| ||||
| !hwPowerModuleRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.28 | |||
notification · current The agent generates this trap when the power module recovers.
| ||||
| !hwPowerBatteryTempLowTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.29 | |||
notification · current The agent generates this trap when the battery temperature is low.
| ||||
| !hwPowerBatteryTempLowRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.30 | |||
notification · current The agent generates this trap when the battery recovers from low temperature.
| ||||
| !hwPowerBatteryTempHighTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.31 | |||
notification · current The agent generates this trap when the battery temperature is High.
| ||||
| !hwPowerBatteryTempHighRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.32 | |||
notification · current The agent generates this trap when the battery recovers from High temperature.
| ||||
| !hwPowerBatteryChargeOverVolTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.33 | |||
notification · current The agent generates this trap when the battery is charged over voltage.
| ||||
| !hwPowerBatteryChargeOverVolRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.34 | |||
notification · current The agent generates this trap when the battery recovers from charged over voltage.
| ||||
| !hwPowerBatteryDischargeLackVolTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.35 | |||
notification · current The agent generates this trap when the discharging battery is lack voltage.
| ||||
| !hwPowerBatteryDischargeLackVolRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.36 | |||
notification · current The agent generates this trap when the battery recovers from discharging lack voltage.
| ||||
| !hwPowerBatteryChargeOverCurTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.37 | |||
notification · current The agent generates this trap when the battery is charged over current.
| ||||
| !hwPowerBatteryChargeOverCurRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.38 | |||
notification · current The agent generates this trap when the battery recovers from charged over current.
| ||||
| !hwPowerBatteryDischargeOverCurTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.39 | |||
notification · current The agent generates this trap when the discharging battery is over current.
| ||||
| !hwPowerBatteryDischargeOverCurRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.40 | |||
notification · current The agent generates this trap when the battery recovers from discharging over current.
| ||||
| !hwRemoteUnitCircuitFailTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.41 | |||
notification · current The agent generates this trap when the circuit of the power module is fault. | ||||
| !hwRemoteUnitCircuitRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.42 | |||
notification · current The agent generates this trap when the circuit of the power module is recovers from fault. | ||||
| !hwRemoteUnitFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.43 | |||
notification · current The agent generates this trap when the power module is fault. | ||||
| !hwRemoteUnitRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.44 | |||
notification · current The agent generates this trap when the power module is recovers from fault. | ||||
| !hwPowerBatteryEleCoreFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.45 | |||
notification · current The agent generates this trap when the LiBattery cell is fault.
| ||||
| !hwPowerBatteryEleCoreRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.46 | |||
notification · current The agent generates this trap when the LiBattery cell is recovers from fault.
| ||||
| !hwPowerBatteryHeaterFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.47 | |||
notification · current The agent generates this trap when the battery heater fault occurs.
| ||||
| !hwPowerBatteryHeaterFaultRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.48 | |||
notification · current The agent generates this trap when the battery heater fault recovers.
| ||||
| !hwPowerBatteryPortReverseConnectTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.49 | |||
notification · current The agent generates this trap when the battery port is connected reversely.
| ||||
| !hwPowerBatteryPortReverseConnectRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.50 | |||
notification · current The agent generates this trap when the battery port is connected correctly .
| ||||
| !hwPowerBatteryContactorFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.51 | |||
notification · current The agent generates this trap when the battery contactor is fault.
| ||||
| !hwPowerBatteryContactorRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.52 | |||
notification · current The agent generates this trap when the battery contactor fault recovers.
| ||||
| !hwPowerLowTemperatureProtectionFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.53 | |||
notification · current The agent generates this trap when the battery cell temperature is lower than the protection point.
| ||||
| !hwPowerLowTemperatureProtectionRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.54 | |||
notification · current The agent generates this trap when the battery cell low temperature protection fault recovers.
| ||||
| !hwPowerCellChargeHighTemperatureProtectionFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.55 | |||
notification · current The agent generates this trap when the battery cell temperature is higher than the protection point when the battery is charging or discharging.
| ||||
| !hwPowerCellChargeHighTemperatureProtectionRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.56 | |||
notification · current The agent generates this trap when the battery cell high temperature protection fault recovers.
| ||||
| !hwPowerOvervoltageProtectionFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.57 | |||
notification · current The agent generates this trap when the battery charging voltage is higher than the protection point.
| ||||
| !hwPowerOvervoltageProtectionRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.58 | |||
notification · current The agent generates this trap when the battery over voltage protection fault recovers.
| ||||
| !hwPowerOvercurrentProtectionFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.59 | |||
notification · current The agent generates this trap when the battery charging electric current is bigger than the protection point.
| ||||
| !hwPowerOvercurrentProtectionRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.60 | |||
notification · current The agent generates this trap when the battery over electric current protection fault recovers.
| ||||
| !hwPowerBattCellPackFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.61 | |||
notification · current The agent generates this trap when the battery cell pack fault.
| ||||
| !hwPowerBattCellPackRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.62 | |||
notification · current The agent generates this trap when the battery cell pack fault recovers.
| ||||
| !hwPowerBattManualDisconnectionFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.63 | |||
notification · current The agent generates this trap when the battery is disconnected manually.
| ||||
| !hwPowerBattManualDisconnectionRestoreTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.64 | |||
notification · current The agent generates this trap when the battery manual disconnection fault recovers.
| ||||
| !hwEmmPowerBatteryBoardFaultTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.65 | |||
notification · current The agent generates this trap when the one or more batteries are not detected.
| ||||
| !hwEmmPowerBatteryBoardRecoverTrap | 1.3.6.1.4.1.2011.6.2.4.2.0.66 | |||
notification · current The agent generates this trap when the batteries recover.
| ||||
| NhwRemotePowerMonObjs | 1.3.6.1.4.1.2011.6.2.5 | |||
| ThwRemoteUnitSysInfoTable | 1.3.6.1.4.1.2011.6.2.5.1 | NA | ||
table · not-accessible · current Remote power system, remote unit basic information table. The indexes of this entry is hwEnvEmuIndex. | ||||
| RhwRemoteUnitSysInfoEntry | 1.3.6.1.4.1.2011.6.2.5.1.1 | NA | ||
row · not-accessible · current Remote power system, remote unit basic information table. The indexes of this entry is hwEnvEmuIndex.
| ||||
| ChwRemoteUnitPowerSystype | 1.3.6.1.4.1.2011.6.2.5.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Type of the remote unit power system. Options: 1.rftv(1) - Type of the remote unit power system is RFT-V 2.rftc(2) - Type of the remote unit power system is RFT-C 3.invalid(255) - Unknown
| ||||
| ChwRemoteUnitDCOutputVol | 1.3.6.1.4.1.2011.6.2.5.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit DC output voltage. Invalid(0x7FFFFFFF) indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal.
| ||||
| ChwRemoteUnitDCOutputCur | 1.3.6.1.4.1.2011.6.2.5.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit DC output current. Invalid(0x7FFFFFFF) indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal.
| ||||
| ChwRemoteUnitSlotNum | 1.3.6.1.4.1.2011.6.2.5.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit slot number. Invalid(-1) indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal. | ||||
| ThwRemoteUnitSlotTable | 1.3.6.1.4.1.2011.6.2.5.2 | NA | ||
table · not-accessible · current Remote power system, remote unit slot information table. The indexes of this entry are hwEnvEmuIndex, hwRemoteUnitSlotIndex. | ||||
| RhwRemoteUnitSlotEntry | 1.3.6.1.4.1.2011.6.2.5.2.1 | NA | ||
row · not-accessible · current Remote power system, remote unit slot information table. The indexes of this entry are hwEnvEmuIndex, hwRemoteUnitSlotIndex. | ||||
| ChwRemoteUnitSlotIndex | 1.3.6.1.4.1.2011.6.2.5.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit slot index. | ||||
| ChwRemoteUnitSlotCircuitNum | 1.3.6.1.4.1.2011.6.2.5.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit slot circuit number. Invalid:-1. | ||||
| ChwRemoteUnitSlotHardVersion | 1.3.6.1.4.1.2011.6.2.5.2.1.3 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current The remote unit slot hard version. Invalid: null string. | ||||
| ChwRemoteUnitSlotSoftVersion | 1.3.6.1.4.1.2011.6.2.5.2.1.4 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current The remote unit slot soft version. Invalid: null string. | ||||
| ChwRemoteUnitSlotStatus | 1.3.6.1.4.1.2011.6.2.5.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the remote unit slot. Options: 1.normal(1) - The state of the remote unit slot is normal 2.fault(2) - The state of the remote unit slot is fault 3.null(3) - The state of the remote unit slot is null 4.invalid(255) - Unknown
| ||||
| ChwRemoteUnitSlotAdminStatus | 1.3.6.1.4.1.2011.6.2.5.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the remote unit slot. Options: 1.delete(1) - Delete the remote unit slot 2.invalid(255) - Unknown
| ||||
| ChwRemoteUnitSlotDCOutputVol | 1.3.6.1.4.1.2011.6.2.5.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit slot DC output voltage. Invalid:-1.
| ||||
| ChwRemoteUnitSlotDCOutputCur | 1.3.6.1.4.1.2011.6.2.5.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit slot DC output current. Invalid:-1.
| ||||
| ThwRemoteUnitCircuitTable | 1.3.6.1.4.1.2011.6.2.5.3 | NA | ||
table · not-accessible · current Remote power system, remote unit circuit information table. The indexes of this entry are hwEnvEmuIndex, hwRemoteUnitSlotIndex, hwRemoteUnitCircuitIndex. | ||||
| RhwRemoteUnitCircuitEntry | 1.3.6.1.4.1.2011.6.2.5.3.1 | NA | ||
row · not-accessible · current Remote power system, remote unit circuit information table. The indexes of this entry are hwEnvEmuIndex, hwRemoteUnitSlotIndex, hwRemoteUnitCircuitIndex. | ||||
| ChwRemoteUnitCircuitIndex | 1.3.6.1.4.1.2011.6.2.5.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit circuit index. | ||||
| ChwRemoteUnitCircuitInputVol | 1.3.6.1.4.1.2011.6.2.5.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit circuit input voltage. Invalid(0x7FFFFFFF) indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal.
| ||||
| ChwRemoteUnitCircuitInputCur | 1.3.6.1.4.1.2011.6.2.5.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The remote unit circuit input current. Invalid(0x7FFFFFFF) indicates that device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal.
| ||||
| ChwRemoteUnitCircuitState | 1.3.6.1.4.1.2011.6.2.5.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the remote unit circuit. Options: 1.normal(1) - The state of the remote unit circuit is normal 2.fault(2) - The state of the remote unit circuit is fault 3.null(3) - The state of the remote unit circuit is null 4.invalid(255) - Unknown
| ||||
Textual conventions
MeasuresRangeInteger32Basic unit of measure: 1.pressure:indicated by mV, 1V = 1000 mV 2.current:indicated by mA, 1A = 1000 mA 3.temperature: indicated by 1% degree centigrade
Traps / Notifications
- acCommFailAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.43 - acCommFailAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.44 - acInputLoopSwtichAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.55 - acInputPowerOffAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.53 - acInputPowerOffAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.54 - acInputVoltageAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.3 - acInputVoltageAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.4 - acInputVoltageHighAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.5 - acInputVoltageHighAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.6 - acInputVoltageLowAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.7 - acInputVoltageLowAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.8 - acMainsSupplyAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.23 - acMainsSupplyAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.24 - batteryChargeOverAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.45 - batteryChargeOverAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.46 - batteryContachAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.29 - batteryContachAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.30 - batteryDischargeTestStartAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.56 - batteryDischargeTestStopAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.57 - batteryFuseAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.27 - batteryFuseAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.28 - batteryLoopAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.25 - batteryLoopAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.26 - batteryVoltageLackAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.47 - batteryVoltageLackAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.48 - chargeCtrlStateAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.41 - chargeModeAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.42 - dcOutputCurrentHighAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.11 - dcOutputCurrentHighAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.12 - dcOutputCurrentLowAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.15 - dcOutputCurrentLowAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.16 - dcOutputVoltageHighAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.9 - dcOutputVoltageHighAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.10 - dcOutputVoltageLowAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.13 - dcOutputVoltageLowAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.14 - hwEmmBatt1TempFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.16 - hwEmmBatt1TempRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.17 - hwEmmBattTemFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.22 - hwEmmBattTemRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.23 - hwEmmDigMainsupplyFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.13 - hwEmmDigMainsupplyRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.14 - hwEmmEnvi1TempFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.20 - hwEmmEnvi1TempRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.21 - hwEmmEnviHumFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.18 - hwEmmEnviHumRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.19 - hwEmmPowerAcvolFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.3 - hwEmmPowerAcvolRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.4 - hwEmmPowerBattaryTestStartTrap
1.3.6.1.4.1.2011.6.2.4.2.0.1 - hwEmmPowerBattaryTestStopTrap
1.3.6.1.4.1.2011.6.2.4.2.0.2 - hwEmmPowerBatteryBoardFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.65 - hwEmmPowerBatteryBoardRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.66 - hwEmmPowerBatteryDetectRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.26 - hwEmmPowerBatteryOffRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.24 - hwEmmPowerBatteryOffTrap
1.3.6.1.4.1.2011.6.2.4.2.0.15 - hwEmmPowerBatteryUnDetectTrap
1.3.6.1.4.1.2011.6.2.4.2.0.25 - hwEmmPowerBattloopFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.7 - hwEmmPowerBattloopRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.8 - hwEmmPowerDcvolFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.5 - hwEmmPowerDcvolRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.6 - hwEmmPowerLoadfuseFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.9 - hwEmmPowerLoadfuseRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.10 - hwEmmPowerRectifierFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.11 - hwEmmPowerRectifierRecoverTrap
1.3.6.1.4.1.2011.6.2.4.2.0.12 - hwPowerBattCellPackFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.61 - hwPowerBattCellPackRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.62 - hwPowerBattManualDisconnectionFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.63 - hwPowerBattManualDisconnectionRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.64 - hwPowerBatteryChargeOverCurRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.38 - hwPowerBatteryChargeOverCurTrap
1.3.6.1.4.1.2011.6.2.4.2.0.37 - hwPowerBatteryChargeOverVolRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.34 - hwPowerBatteryChargeOverVolTrap
1.3.6.1.4.1.2011.6.2.4.2.0.33 - hwPowerBatteryContactorFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.51 - hwPowerBatteryContactorRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.52 - hwPowerBatteryDischargeLackVolRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.36 - hwPowerBatteryDischargeLackVolTrap
1.3.6.1.4.1.2011.6.2.4.2.0.35 - hwPowerBatteryDischargeOverCurRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.40 - hwPowerBatteryDischargeOverCurTrap
1.3.6.1.4.1.2011.6.2.4.2.0.39 - hwPowerBatteryEleCoreFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.45 - hwPowerBatteryEleCoreRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.46 - hwPowerBatteryHeaterFaultRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.48 - hwPowerBatteryHeaterFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.47 - hwPowerBatteryPortReverseConnectRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.50 - hwPowerBatteryPortReverseConnectTrap
1.3.6.1.4.1.2011.6.2.4.2.0.49 - hwPowerBatteryTempHighRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.32 - hwPowerBatteryTempHighTrap
1.3.6.1.4.1.2011.6.2.4.2.0.31 - hwPowerBatteryTempLowRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.30 - hwPowerBatteryTempLowTrap
1.3.6.1.4.1.2011.6.2.4.2.0.29 - hwPowerCellChargeHighTemperatureProtectionFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.55 - hwPowerCellChargeHighTemperatureProtectionRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.56 - hwPowerLowTemperatureProtectionFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.53 - hwPowerLowTemperatureProtectionRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.54 - hwPowerModuleMismatchTrap
1.3.6.1.4.1.2011.6.2.4.2.0.27 - hwPowerModuleRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.28 - hwPowerOvercurrentProtectionFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.59 - hwPowerOvercurrentProtectionRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.60 - hwPowerOvervoltageProtectionFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.57 - hwPowerOvervoltageProtectionRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.58 - hwRemoteUnitCircuitFailTrap
1.3.6.1.4.1.2011.6.2.4.2.0.41 - hwRemoteUnitCircuitRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.42 - hwRemoteUnitFaultTrap
1.3.6.1.4.1.2011.6.2.4.2.0.43 - hwRemoteUnitRestoreTrap
1.3.6.1.4.1.2011.6.2.4.2.0.44 - loadFuseAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.39 - loadFuseAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.40 - loadOnceOffAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.51 - loadOnceOffAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.52 - loadTwiceOffAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.49 - loadTwiceOffAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.50 - overBattPowerOffAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.19 - overBattPowerOffAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.20 - overLoadPowerAbnormalAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.17 - overLoadPowerAbnormalAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.18 - overLoadPowerOffAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.21 - overLoadPowerOffAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.22 - powerCentralInputAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.62 - powerCentralOutputAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.63 - powerCentralOutputModeSwtichAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.60 - powerCentralTempretaureAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.61 - powerConnFaultAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.1 - powerConnFaultAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.2 - powerLineAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.66 - powerProtectAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.58 - powerRemoteCommFaultAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.64 - powerRemotePowerAlarm1
1.3.6.1.4.1.2011.6.2.2.2.0.67 - powerRemotePowerAlarm2
1.3.6.1.4.1.2011.6.2.2.2.0.68 - powerRemotePowerAlarm3
1.3.6.1.4.1.2011.6.2.2.2.0.69 - powerRemoteVoltageAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.65 - powerUndoProtectAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.59 - transferModuleOffAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.33 - transferModuleOffAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.34 - transferModuleSwitchAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.37 - userModuleOffAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.31 - userModuleOffAlarmResume
1.3.6.1.4.1.2011.6.2.2.2.0.32 - userModuleSwitchAlarm
1.3.6.1.4.1.2011.6.2.2.2.0.35