HUAWEI-PORT-MIB
HUAWEI Technology Co.,LtdThe private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB
snmptranslate -m HUAWEI-PORT-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-PORT-MIB <host> 1.3.6.1.4.1.2011.5.25.157Imports
| ENTITY-MIB | entPhysicalName |
|---|---|
| HUAWEI-GTL-MIB | hwGtlItemIndex, hwGtlItemName, hwGtlRemainTime |
| HUAWEI-IMA-MIB | ImaFrameLength, ImaGroupState |
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwPortMIB | 1.3.6.1.4.1.2011.5.25.157 | |||
identity The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB | ||||
| NhwPortMIBObjects | 1.3.6.1.4.1.2011.5.25.157.1 | |||
| NhwEthernet | 1.3.6.1.4.1.2011.5.25.157.1.1 | |||
| ThwEthernetTable | 1.3.6.1.4.1.2011.5.25.157.1.1.1 | NA | ||
table · not-accessible · current This table describes the access and configuration of physical attributes of various Ethernet interfaces. | ||||
| RhwEthernetEntry | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1 | NA | ||
row · not-accessible · current Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces.
| ||||
| ChwEthernetIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | ||||
| ChwEthernetLoopback | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the internal loop (local loopback) function, which is used to test a local interface. When the interface works normally, the local loopback function must be disabled. By default, stopLoopback is set.
| ||||
| ChwEthernetPortType | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the type of an Ethernet interface, either the optical interface or the electrical interface.
| ||||
| ChwEthernetSpeedSet | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the transmission rate of the Ethernet interface. You can configure transmission rates for only certain Ethernet electrical interfaces, and you cannot configure transmission rates for optical interfaces. The transmission rate for an electrical interface can be set to 10M, 100M, or 1000M.
| ||||
| ChwEthernetDuplex | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the duplex mode of an Ethernet interface. Ethernet electrical interfaces can work in either half-duplex or full-duplex mode. Ethernet optical interfaces can work only in full-duplex mode.
| ||||
| ChwEthernetNegotiation | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether auto-negotiation is enabled on an Ethernet electrical interface. The default value is enable. For an Ethernet electrical interface, hwEthernetSpeedSet, hwEthernetDuplex, and hwEthernetNegotiation are associated with each other. If hwEthernetNegotiation is set to enable, the values of hwEthernetSpeedSet and hwEthernetDuplex are obtained through auto-negotiation. When hwEthernetSpeedSet is forcibly set to a value, hwEthernetDuplex is then automatically changed to full (the default value), and hwEthernetNegotiation is automatically changed to disable. If hwEthernetNegotiation is set to enable, you cannot set a value for hwEthernetDuplex. For an Ethernet optical interface, you can set a value for hwEthernetNegotiation, and hwEthernetNegotiation is not associated with hwEthernetSpeedSet or hwEthernetDuplex. | ||||
| ChwEthernetPortTypeOperate | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the link type of an Ethernet interface, either optical fibers or cables. This object is only supported by certain Ethernet interfaces.
| ||||
| ChwEthernetClock | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the clock mode. By default, the slave clock mode is used. Only WAN interfaces require the clock configuration.
| ||||
| ChwEthernetFlagJ0Mode | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates that 10GE WAN interfaces have to use SDH/SONET as the frame format and the overhead byte has to be set. The overhead byte of an SDH frame can be: j0: indicates the section trace byte. The default value is j016ByteMode(2). hwEthernetFlagJ0Trace: NetEngine.
| ||||
| ChwEthernetFlagJ0Value | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current This object indicates that when hwEthernetFlagJ0Mode is set to j01ByteMode, this object takes effect. | ||||
| ChwEthernetFlagJ0Trace | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current This object indicates the section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this object takes effect. When hwEthernetFlagJ0Mode is set to j016ByteMode, the value of hwEthernetFlagJ0Trace is up to 15 characters; when hwEthernetFlagJ0Mode is set to j064ByteOrNullMode, the value of hwEthernetFlagJ0Trace is up to 64 characters. | ||||
| ChwEthernetFlagJ1Mode | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the overhead byte of an SDH frame. j1 indicates the path trace byte. By default, the value is j116ByteMode(2): hwEthernetFlagJ1Trace: NetEngine.
| ||||
| ChwEthernetFlagJ1Value | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current This object indicates that when hwEthernetFlagJ1Mode is set to j11ByteMode, this object takes effect. | ||||
| ChwEthernetFlagJ1Trace | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current This object indicates the path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this object takes effect. When hwEthernetFlagJ1Mode is set to j116ByteMode, the value of this object is up to 15 characters. When hwEthernetFlagJ1Mode is set to j164ByteOrNullMode, the value of this object is up to 64 characters. | ||||
| ChwEthernetFlagC2Value | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current This object indicates the overhead byte of the SDH frame. C2: indicates the path signal label byte. The value ranges from 00 to FF, in the hexadecimal format. The default value is 26 (0x1a). | ||||
| ChwEthernetUpHoldTime | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31 | Integer32 (0..86400000) | RW | |
column · Integer32 (0..86400000) · read-write · current This object indicates the time period during which the interface remains Up. | ||||
| ChwEthernetDownHoldTime | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32 | Integer32 (0..86400000) | RW | |
column · Integer32 (0..86400000) · read-write · current This object indicates the time period during which the interface remains Down. | ||||
| ChwEthernetSubinterfaceStatisticEnable | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates statistics collection is enabled for a sub-interface. | ||||
| ChwEthernetFlowControl | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the interface flow control status.
| ||||
| ChwEthernetOffline | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates that the physical protocol status of an interface is Down.
| ||||
| ChwEthernetSetTransferMode | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the LAN-WAN mode of an Ethernet interface.
| ||||
| ChwEthernetJumboframeMaxLength | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37 | Integer32 (1518..16000) | RW | |
column · Integer32 (1518..16000) · read-write · current This object indicates the maximum length of the Jumbo frame on an interface. | ||||
| ChwEthernetComboType | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38 | INTEGER | RW | |
column · INTEGER · read-write · current combo mode of this port.
| ||||
| ChwEthernetPortMode | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates combo mode of this port.
| ||||
| ChwEthernetNegotiationMode | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40 | INTEGER | RW | |
column · INTEGER · read-write · current Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock.
| ||||
| ChwEthernetCarrierTransitions | 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.41 | Integer32 | RO | |
column · Integer32 · read-only · current Number of times the interface state has transitioned from up to down since the time the device restarted. | ||||
| NhwPos | 1.3.6.1.4.1.2011.5.25.157.1.2 | |||
| ThwPosTable | 1.3.6.1.4.1.2011.5.25.157.1.2.1 | NA | ||
table · not-accessible · current This table describes the access and configuration of physical attributes of various POS interfaces. | ||||
| RhwPosEntry | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1 | NA | ||
row · not-accessible · current Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface.
| ||||
| ChwPosIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Interface index(es) of port(s) present on the device . | ||||
| ChwPosLinkProtocol | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the link layer protocol running on a POS interface. By default, a POS interface uses PPP as the link layer protocol.
| ||||
| ChwPosFrameFormat | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the frame type on a POS interface. By default, the frame type is SDH.
| ||||
| ChwPosLoopback | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the internal loop (local loopback) function on a POS interface, which is used to test a local interface. When the interface works normally, the local loopback function must be disabled. By default, stopLoopback is set.
| ||||
| ChwPosScramble | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.14 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether the payload scramble function is enabled on a POS interface. By default, the scramble function is enabled. | ||||
| ChwPosClock | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the clock mode. By default, the slave clock mode is used.
| ||||
| ChwPosCrcVerifyCode | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the length of the CRC field. By default, the length is 32.
| ||||
| ChwPosFlagJ0Mode | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the overhead byte of an SDH frame. The value can be: j0: indicates the section trace byte. The default value is j016ByteMode(2). hwEthernetFlagJ0Trace: NetEngine.
| ||||
| ChwPosFlagJ0Value | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.22 | Integer32 (0..127) | RW | |
column · Integer32 (0..127) · read-write · current This object indicates that when hwPosFlagJ0Mode is set to j01ByteMode, this object takes effect. | ||||
| ChwPosFlagJ0Trace | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.23 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current This object indicates the section trace byte. When hwPosFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this object takes effect. When hwPosFlagJ0Mode is set to j016ByteMode, the value of hwPosFlagJ0Mode is up to 15 characters; when hwPosFlagJ0Mode is set to j064ByteOrNullMode, the value of hwPosFlagJ0Mode is up to 64 characters. | ||||
| ChwPosFlagJ1Mode | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the overhead byte of an SDH frame. j1 indicates the path trace byte. The default value is j116ByteMode(2). hwPosFlagJ1Trace: NetEngine.
| ||||
| ChwPosFlagJ1Value | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.25 | Integer32 (0..127) | RW | |
column · Integer32 (0..127) · read-write · current This object indicates the j1-1byte-mode value. When hwPosFlagJ1Mode is set to j11ByteMode, this object takes effect. | ||||
| ChwPosFlagJ1Trace | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.26 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current This object indicates the path trace byte. When hwPosFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this object takes effect. When hwPosFlagJ1Mode is set to j116ByteMode, the value of hwPosFlagJ1Mode is up to 15 characters; when hwPosFlagJ1Mode is set to j164ByteOrNullMode, the value of hwPosFlagJ1Mode is up to 64 characters. | ||||
| ChwPosFlagC2Value | 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.27 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current This object indicates the overhead byte of an SDH frame. C2 indicates the path signal label byte. The value ranges from 00 to FF in the hexadecimal format. The default value is 22 (0x16). | ||||
| NhwCpos | 1.3.6.1.4.1.2011.5.25.157.1.3 | |||
| ThwCposTable | 1.3.6.1.4.1.2011.5.25.157.1.3.1 | NA | ||
table · not-accessible · current Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface. | ||||
| RhwCposEntry | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1 | NA | ||
row · not-accessible · current Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface.
| ||||
| ChwCposIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Interface index(es) of port(s) present on the device . | ||||
| ChwCposClock | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode.
| ||||
| ChwCposIfType | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the interface type.
| ||||
| ChwCposFrameFormat | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the frame type of the CPOS interface. By default, the frame type of the CPOS interface is SDH.
| ||||
| ChwCposMultiplex | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the multiplex mode of the AUG. By default, the multiplex mode of the AUG is au-4.
| ||||
| ChwCposLoopback | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the loopback function of the CPOS interface. By default, the loopback function is disabled.
| ||||
| ChwCposFlagJ0Mode | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwCposFlagJ0Trace NetEngine.
| ||||
| ChwCposFlagJ0Value | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.22 | Integer32 (0..127) | RW | |
column · Integer32 (0..127) · read-write · current j01ByteMode Value . When hwCposFlagJ0Mode is set to j01ByteMode, hwCposFlagJ0Value takes effect. | ||||
| ChwCposFlagJ0Trace | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.23 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current Set section trace byte. When hwCposFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwCposFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwCposFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte. | ||||
| ChwCposFlagJ1Mode | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwCposFlagJ1Trace NetEngine.
| ||||
| ChwCposFlagJ1Value | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.25 | Integer32 (0..127) | RW | |
column · Integer32 (0..127) · read-write · current Indicates the value of j11ByteMode. When hwCposFlagJ1Mode is set to j11ByteMode, hwCposFlagJ1Value takes effect. | ||||
| ChwCposFlagJ1Trace | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.26 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current Set path trace byte. When hwCposFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwCposFlagJ1Mode is set to j116ByteMode, this variable is a string up to 15 characters trace byte. When hwCposFlagJ1Mode is set to j164ByteOrNullMode, this variable is a string up to 64 characters trace byte. | ||||
| ChwCposFlagC2Value | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.27 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16). | ||||
| ChwCposB1SdAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.28 | Integer32 (1..9) | RW | |
column · Integer32 (1..9) · read-write · current The threshold of B1 threshold crossing alarm. | ||||
| ChwCposB1ExcAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.29 | Integer32 (1..9) | RW | |
column · Integer32 (1..9) · read-write · current The threshold of B1 threshold crossing alarm. | ||||
| ChwCposB2SdAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.30 | Integer32 (1..9) | RW | |
column · Integer32 (1..9) · read-write · current The threshold of B2 threshold crossing alarm. | ||||
| ChwCposB2ExcAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.31 | Integer32 (1..9) | RW | |
column · Integer32 (1..9) · read-write · current The threshold of B2 threshold crossing alarm. | ||||
| ChwCposB3SdAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.32 | Integer32 (1..9) | RW | |
column · Integer32 (1..9) · read-write · current The threshold of B3 threshold crossing alarm. | ||||
| ChwCposB3ExcAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.33 | Integer32 (1..9) | RW | |
column · Integer32 (1..9) · read-write · current The threshold of B3 threshold crossing alarm. | ||||
| ChwCposLpBipSdAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.34 | Integer32 (1..9) | RW | |
column · Integer32 (1..9) · read-write · current The threshold of BIP2 threshold crossing alarm. | ||||
| ChwCposLpBipExcAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.35 | Integer32 (1..9) | RW | |
column · Integer32 (1..9) · read-write · current The threshold of BIP2 threshold crossing alarm. | ||||
| ChwCposHighPathNumber | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.36 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16). | ||||
| ChwCposLowPathNumber | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.37 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16). | ||||
| ChwCposMappingMode | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.38 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the mapping mode of cpos port, default if h-mode(1).
| ||||
| ChwCposRxJ0Mode | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.39 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the received J0 mode.
| ||||
| ChwCposRxJ1Mode | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.40 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the received J1 mode.
| ||||
| ChwCposRxJ0Value | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.41 | Integer32 (0..127) | RO | |
column · Integer32 (0..127) · read-only · current Indicates the received J0 value of 1-byte mode. | ||||
| ChwCposRxJ1Value | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.42 | Integer32 (0..127) | RO | |
column · Integer32 (0..127) · read-only · current Indicates the received J1 value of 1-byte mode. | ||||
| ChwCposRxJ0Trace | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.43 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Indicates the received J0 characters of 16-byte or 64-byte mode. | ||||
| ChwCposRxJ1Trace | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.44 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Indicates the received J1 characters of 16-byte or 64-byte mode. | ||||
| ChwCposVc4Flag | 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.45 | Integer32 (0..2) | RO | |
column · Integer32 (0..2) · read-only · current The value of this object identifies whether a VC4 channel can be created on the CPOS interface. 0 indicates that no VC4 channel can be created on the CPOS interface. 1 indicates that a VC4 channel can be created but has not been created on the CPOS interface. 2 indicates that a VC4 channel can be created and has been created on the CPOS interface. | ||||
| ShwPortPhysicalHpIndex | 1.3.6.1.4.1.2011.5.25.157.1.3.2 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Indicates the higher order path number. | ||||
| ShwPortPhysicalLpIndex | 1.3.6.1.4.1.2011.5.25.157.1.3.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Indicates the low order path number. | ||||
| ThwCposLpTable | 1.3.6.1.4.1.2011.5.25.157.1.3.4 | NA | ||
table · not-accessible · current Description. | ||||
| RhwCposLpEntry | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1 | NA | ||
| ChwCposLpIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Description. | ||||
| ChwCposLpId | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current Description. | ||||
| ChwCposFlagJ2Mode | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Description.
| ||||
| ChwCposFlagJ2Value | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.4 | Integer32 (0..127) | RW | |
column · Integer32 (0..127) · read-write · current Description. | ||||
| ChwCposFlagJ2Trace | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.5 | OCTET STRING (SIZE (0..16)) | RW | |
column · OCTET STRING (SIZE (0..16)) · read-write · current Description. | ||||
| ChwCposRxJ2Mode | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the received J2 mode.
| ||||
| ChwCposRxJ2Value | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.7 | Integer32 (0..127) | RO | |
column · Integer32 (0..127) · read-only · current Indicates the received J2 value of 1-byte mode. | ||||
| ChwCposRxJ2Trace | 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.8 | OCTET STRING (SIZE (0..16)) | RO | |
column · OCTET STRING (SIZE (0..16)) · read-only · current Indicates the received J2 characters of 16-byte or 64-byte mode. | ||||
| NhwDs0ChannelBundle | 1.3.6.1.4.1.2011.5.25.157.1.4 | |||
| ThwDs0ChannelBundleTable | 1.3.6.1.4.1.2011.5.25.157.1.4.1 | NA | ||
table · not-accessible · current This table is used to bundle timeslots of CE1/CT1 interfaces. | ||||
| RhwDs0ChannelBundleEntry | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1 | NA | ||
row · not-accessible · current This table is used to bundle timeslots of CE1/CT1 interfaces. | ||||
| ChwDs0ChannelBundleParentIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current Indicates the index of the parent interface. | ||||
| ChwDs0ChannelBundleDs1ChannelId | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.2 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current Indicates the channel ID. | ||||
| ChwDs0ChannelBundleId | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.3 | Integer32 (0..30) | AN | |
column · Integer32 (0..30) · accessible-for-notify · current Indicates the index number of the channel set. | ||||
| ChwDs0ChannelBundleIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.11 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current Indicates the index of the serial interface formed by the timeslot binding. | ||||
| ChwDs0ChannelBundleTimeSlots | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.12 | OCTET STRING (SIZE (0..61)) | RC | |
column · OCTET STRING (SIZE (0..61)) · read-create · current Indicates the number of the range of the timeslot to be bound. The value is an integer ranging from 0 to 31. Multiple timeslots are separated by ','. The range of timeslot is expressed by using '-'. For E1 card mode: If the timeslots are '0-31', it means unframed format, If the timeslots are '0-30', it means framed format, For T1 card mode: If the timeslots are '0-23', it means unframed format, If the timeslots are '0-22', it means framed format, and hwDs0ChannelBundleDs1ChannelId and hwDs0ChannelBundleId should be zero. | ||||
| ChwDs0ChannelBundleSpeed | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Configures the mode to configure the timeslots. If the parameter 56 k is selected, the timeslots are bound in the mode of N x 56 kbit/s. If the parameter 64 k is selected, the timeslots are bound in the mode of N x 64 kbit/s. If the parameter 150336 k is selected, the interface is used for remarking the CEP interface. The default value is 64kbit/s.
| ||||
| ChwDs0ChannelBundleTimeSlot0 | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates the timeslot0 to be bound or a single channel. The ture value indicates it will be create TDM channel. | ||||
| ChwDs0ChannelBundleIsMasterPW | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates if the pw configed on this port is master pw.
| ||||
| ChwDs0ChannelBundleMasterPWStatus | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the status of master pw.
| ||||
| ChwDs0ChannelBundlePortName | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Port name. | ||||
| ChwDs0ChannelBundleRowStatus | 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current This variable is used to create or delete an object. | ||||
| NhwDs1 | 1.3.6.1.4.1.2011.5.25.157.1.5 | |||
| ThwDs1Table | 1.3.6.1.4.1.2011.5.25.157.1.5.1 | NA | ||
table · not-accessible · current This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces. | ||||
| RhwDs1Entry | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1 | NA | ||
row · not-accessible · current This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces. | ||||
| ChwDs1ParentIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the index of the parent interface. | ||||
| ChwDs1ChannelId | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.2 | Integer32 (0..63) | AN | |
column · Integer32 (0..63) · accessible-for-notify · current Indicates the channel ID. | ||||
| ChwDs1IfIndex | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.3 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwDs1ChannelType | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the interface type. The type can be E1/CE1 or T1/CT1.
| ||||
| ChwDs1IfType | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the interface tyep. e3: is multiplexed by CE3 interfaces. t3: is multiplexed by CT3 interfaces. cpos: is multiplexed by CPOS interfaces. atm: is multiplexed by ATM interfaces. none: indicates the physical interface. default:none
| ||||
| ChwDs1Channelized | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true. | ||||
| ChwDs1CodeType | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the code type of the interface. ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bipolar with 8-Zero Substitution. none: is not supported
| ||||
| ChwDs1Clock | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal.
| ||||
| ChwDs1FrameFormat | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the frame format of the interface. crc4: indicates that the frame format is CRC4. no-crc4: indicates that the frame format is no-CRC4. sf: indicates that the frame format is Super Frame. esf: indicates that the frame format is Extended Super Frame. By default, the frame format of an E1 interface is no-crc4. By default, the frame format of a T1 interface is esf.
| ||||
| ChwDs1Cable | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current The cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null.
| ||||
| ChwDs1Loopback | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip.
| ||||
| ChwDs1ClockRecoveryDomain | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.19 | Integer32 (0..8) | RC | |
column · Integer32 (0..8) · read-create · current Indicates the clock recovery domain of the interface. | ||||
| ChwDs1PWClockDomain | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.20 | Integer32 (0..8) | RC | |
column · Integer32 (0..8) · read-create · current Indicates the clock recovery domain of the interface. | ||||
| ChwDs1WorkMode | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.21 | Integer32 (0..8) | RO | |
column · Integer32 (0..8) · read-only · current Indicates the clock recovery domain of the interface. | ||||
| ChwDs1EsAlarmTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.22 | Integer32 (1..900) | RW | |
column · Integer32 (1..900) · read-write · current The trigger threshold of code violation count threshold crossing alarm of E1 line side . | ||||
| ChwDs1EsAlarmResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.23 | Integer32 (1..900) | RW | |
column · Integer32 (1..900) · read-write · current The resume threshold of code violation count threshold crossing alarm of E1 line side . | ||||
| ChwDs1RowStatus | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current This variable is used to create or delete an object. | ||||
| ChwDs1Lbo | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.52 | INTEGER | RC | |
column · INTEGER · read-create · current The lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 times
| ||||
| ChwDs1CableLength | 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.53 | INTEGER | RC | |
column · INTEGER · read-create · current The cableLength of T1 port. Unit: feet.
| ||||
| NhwDs3 | 1.3.6.1.4.1.2011.5.25.157.1.6 | |||
| ThwDs3Table | 1.3.6.1.4.1.2011.5.25.157.1.6.1 | NA | ||
table · not-accessible · current This table lists all E3/CE3 interfaces or all T3/CT3 interfaces. | ||||
| RhwDs3Entry | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1 | NA | ||
row · not-accessible · current This table lists all E3/CE3 interfaces or all T3/CT3 interfaces. | ||||
| ChwDs3ParentIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the index of the parent interface. | ||||
| ChwDs3ChannelId | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.2 | Integer32 (0..3) | NA | |
column · Integer32 (0..3) · not-accessible · current Indicates the index of the parent interface. | ||||
| ChwDs3IfIndex | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.3 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwDs3ChannelType | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the interface type. The type can be E3/CE3 or T3/CT3.
| ||||
| ChwDs3IfType | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the parent interface type of the interface. cpos: is multiplexed by CPOS interfaces. none: indicates the interface is a physical interface. The default is none.
| ||||
| ChwDs3Channelized | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true. | ||||
| ChwDs3Clock | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal.
| ||||
| ChwDs3FrameFormat | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the frame format of the interface.
| ||||
| ChwDs3Scramble | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.16 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates the scramble function of the interface. true: enables the scramble function. false: disables the scramble function. The default is false. | ||||
| ChwDs3Cable | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current The cable command takes effect only if the E3 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null.
| ||||
| ChwDs3NationalBit | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the national bit of the E3/CE3 interface. n0: indicates the national bit is 0 and the interface supports only the communication within a country. n1: indicates the national bit is 1 and the interface supports the international communication.
| ||||
| ChwDs3Loopback | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip.
| ||||
| ChwDs3CreateSerial | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.20 | TruthValue | RC | |
column · TruthValue · read-create · current Create serial interface from Ds3 interface. True create serial interface. False destroy serial interface. | ||||
| ChwDs3RowStatus | 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current This variable is used to create or delete an object. | ||||
| NhwBundleSerial | 1.3.6.1.4.1.2011.5.25.157.1.7 | |||
| ThwBundleSerialTable | 1.3.6.1.4.1.2011.5.25.157.1.7.1 | NA | ||
table · not-accessible · current Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface. | ||||
| RhwBundleSerialEntry | 1.3.6.1.4.1.2011.5.25.157.1.7.1.1 | NA | ||
row · not-accessible · current Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface. | ||||
| ChwBundleSerialIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Interface index(es) of serial(s) present on the device . | ||||
| ChwBundleSerialLinkProtocol | 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The link-protocol of interface. The serial(s) always use PPP as its link-protocol for default.
| ||||
| ChwBundleSerialTimerHold | 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.12 | Integer32 (0..32767) | RW | |
column · Integer32 (0..32767) · read-write · current Indicates the interval for sending Keepalive packets from the serial interface to the peer. The default is 10 seconds. | ||||
| ChwBundleSerialLoopback | 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.13 | TruthValue | RW | |
column · TruthValue · read-write · current true: enables the loopback on the serial interface. false: disables the loopback on the serial interface. By default, the loopback on the serial interface is disabled. | ||||
| ChwBundleSerialCrcVerifyCode | 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the length of the CRC verify code. The default is 32.
| ||||
| NhwPhysicalPort | 1.3.6.1.4.1.2011.5.25.157.1.8 | |||
| ThwPhysicalPortTable | 1.3.6.1.4.1.2011.5.25.157.1.8.1 | NA | ||
table · not-accessible · current This table describes the access and configuration of attributes of various physical interfaces. | ||||
| RhwPhysicalPortEntry | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1 | NA | ||
row · not-accessible · current Indicates the attribute of the physical port. | ||||
| ChwPhysicalPortIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current This object indicates the interface index. | ||||
| ChwPhysicalPortDelayTime | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2 | Unsigned32 (0..86400000) | RW | |
column · Unsigned32 (0..86400000) · read-write · current This object indicates the interface delay. The default value is 0 ms. | ||||
| ChwPhysicalPortDelayRemainTime | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3 | Unsigned32 (0..86400000) | RO | |
column · Unsigned32 (0..86400000) · read-only · current This object indicates the remaining time after the interface delay is enabled. The value is in milliseconds. | ||||
| ChwPhysicalPortName | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the physical port name. | ||||
| ChwPhysicalPortInChassis | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the physical port in chassis. | ||||
| ChwPhysicalPortInSlot | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the SlotID. | ||||
| ChwPhysicalPortInCard | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the CardID. | ||||
| ChwPhysicalPortInPort | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the PortID. | ||||
| ChwPhysicalAutoShutLaserEnable | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the automatic disabling of LASER. By default, automatic disabling of LASER is not supported.
| ||||
| ChwPhysicalAutoShutLaserOpenInterval | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10 | Integer32 (100..300 | 2147483647) | RW | |
column · Integer32 (100..300 | 2147483647) · read-write · current This object indicates the enabling interval for the automatic disabling of LASER. The default value is 2000 ms. The value 2147483647 indicates that the interface does not support this function. | ||||
| ChwPhysicalAutoShutLaserCloseInterval | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11 | Integer32 (200..30000 | 2147483647) | RW | |
column · Integer32 (200..30000 | 2147483647) · read-write · current This object indicates the disabling interval for the automatic disabling of LASER. The default value is 60000 ms. The value 2147483647 indicates that the interface does not support this function. | ||||
| ChwPhysicalAutoShutLaserLongOpenInterval | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12 | Integer32 (200..30000 | 2147483647) | RW | |
column · Integer32 (200..30000 | 2147483647) · read-write · current This object indicates the long enabling interval for the automatic disabling of LASER. The default value is 90000 ms. The value 2147483647 indicates that the interface does not support this function. | ||||
| ChwPhysicalLoopbackType | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the current interface status.
| ||||
| ChwPhysicalShutLaser | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates whether the LASER function is enabled or not.
| ||||
| ChwPhysicalLaserStatus | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the LASER status.
| ||||
| ChwPhysicalPortHoldUp | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates whether the interface is Up.
| ||||
| ChwPhysicalPortAlarmInverseEnable | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Config port alarm inverse enable.
| ||||
| ChwPhysicalPortInVsId | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current VsId. | ||||
| ChwPhysicalPortAlarmName | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.19 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the physical port alarm name. | ||||
| ChwInputRateChangeThresholdPercent | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.20 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the threshold for the input rate change, in percentage. | ||||
| ChwOutputRateChangeThresholdPercent | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.21 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the threshold for the output rate change, in percentage. | ||||
| ChwCurrentStatisticalPeriodRate | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the rate in the current statistical period. | ||||
| ChwLastStatisticalPeriodRate | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the rate in the last statistical period. | ||||
| ChwPortPhysicalRate | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the current physical rate. | ||||
| ChwLicenseType | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.25 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the type of interface function-controlled license. | ||||
| ChwMaxPortNum | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the Maximum number of available interfaces | ||||
| ChwUsedPortNum | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the Number of interfaces in use. | ||||
| ChwPhysicalPortMode | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current The current state of portMode in port.
| ||||
| ChwScadaGroupId | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.29 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the scada group ID. | ||||
| ChwPhysicalPortGroupID | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.30 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the physical port group ID. | ||||
| ChwPortTransModeReasonDescr | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.31 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the physical port transmission mode different reason. | ||||
| ChwAcBlockReason | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.32 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the AC block reason. | ||||
| ChwPhysicalPortLocalPhyNum | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.33 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the local physical port phy number. | ||||
| ChwPhysicalPortRemotePhyNum | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.34 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the remote physical port phy number. | ||||
| ChwPhysicalPortLocalGroupID | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.35 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the local physical port groupID. | ||||
| ChwPhysicalPortRemteGroupID | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.36 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the remote physical port groupID. | ||||
| ChwPhysicalPortBW | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.37 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the local port bandwidth | ||||
| ChwPhysicalPortList | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.38 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicates the physical port list | ||||
| ChwPhysicalPortPortType | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.39 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the physical port type | ||||
| ChwPhysicalPortAlarmReason | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.40 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the physical port alarm reason | ||||
| ChwInputDiscardEnable | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.41 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Indicates whether input discard traps should be
generated for this physical port.
By default, the value is disabled. | ||||
| ChwInputDiscardThreshold | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.42 | Unsigned32 (100..4294967295) | RW | |
column · Unsigned32 (100..4294967295) · read-write · current Indicates the physical port input discard threshold, the default is 3000 packets | ||||
| ChwInputDiscardInterval | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.43 | Integer32 (60..86400) | RW | |
column · Integer32 (60..86400) · read-write · current Indicates the physical port input discard interval, it must be a multiple of 10, the default is 300 seconds | ||||
| ChwInputDiscardStatistics | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.44 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the physical port input discard statistics | ||||
| ChwOutputDiscardEnable | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.45 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Indicates whether output discard traps should be
generated for this physical port.
By default, the value is disabled. | ||||
| ChwOutputDiscardThreshold | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.46 | Unsigned32 (100..4294967295) | RW | |
column · Unsigned32 (100..4294967295) · read-write · current Indicates the physical port output discard threshold, the default is 3000 packets | ||||
| ChwOutputDiscardInterval | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.47 | Integer32 (60..86400) | RW | |
column · Integer32 (60..86400) · read-write · current Indicates the physical port output discard interval, it must be a multiple of 10, the default is 300 seconds | ||||
| ChwOutputDiscardStatistics | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.48 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the physical port output discard statistics | ||||
| ChwBandwidthLast | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.49 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the physical port last bandwidth. | ||||
| ChwBandwidthCurrent | 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.50 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the physical port current bandwidth. | ||||
| ThwSDHRsMsPerfCurrentTable | 1.3.6.1.4.1.2011.5.25.157.1.8.2 | NA | ||
table · not-accessible · current This table describes functions of physical interfaces. | ||||
| RhwSDHRsMsPerfCurrentEntry | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1 | NA | ||
row · not-accessible · current Indicates the performance stat of the Regenerator Section. | ||||
| ChwSDHRsMsPerfCurrentIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | ||||
| ChwSDHRsMsPerfCurrentDataIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.2 | Integer32 (0..1) | NA | |
column · Integer32 (0..1) · not-accessible · current This object indicates the data index. | ||||
| ChwSDHRsPerfCurrentBBE | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the regenerator section (RS) background block error. | ||||
| ChwSDHRsPerfCurrentES | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the RS error lasts. | ||||
| ChwSDHRsPerfCurrentSES | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the severe RS error lasts. | ||||
| ChwSDHRsPerfCurrentUAS | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the RS does not exist. | ||||
| ChwSDHMsPerfCurrentBBE | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the multi-section background block error. | ||||
| ChwSDHMsPerfCurrentES | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the multi-section error lasts. | ||||
| ChwSDHMsPerfCurrentSES | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the severe multi-section error lasts. | ||||
| ChwSDHMsPerfCurrentUAS | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the multi-section does not exist. | ||||
| ChwSDHMsPerfCurrentFEBBE | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the multi-section remote background block error. | ||||
| ChwSDHMsPerfCurrentFEES | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the multi-section remote error lasts. | ||||
| ChwSDHMsPerfCurrentFESES | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the severe multi-section remote error lasts. | ||||
| ChwSDHMsPerfCurrentFEUAS | 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds that the multi-section remote error does not exist. | ||||
| ThwSDHHpPerfCurrentTable | 1.3.6.1.4.1.2011.5.25.157.1.8.3 | NA | ||
table · not-accessible · current This table describes functions of physical interfaces. | ||||
| RhwSDHHpPerfCurrentEntry | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1 | NA | ||
row · not-accessible · current Indicates the performance stat of the Higher order Path. | ||||
| ChwSDHHpPerfCurrentIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current This object indicates the interface index. | ||||
| ChwSDHHpPerfCurrentHpIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the higher order path (HP) index. | ||||
| ChwSDHHpPerfCurrentDataIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.3 | Integer32 (0..1) | NA | |
column · Integer32 (0..1) · not-accessible · current This object indicates the data index. | ||||
| ChwSDHHpPerfCurrentBBE | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the background errored block of the HP. | ||||
| ChwSDHHpPerfCurrentES | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of errored seconds on the HP. | ||||
| ChwSDHHpPerfCurrentSES | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of severe errored seconds on the HP. | ||||
| ChwSDHHpPerfCurrentUAS | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of unavailable seconds on the HP. | ||||
| ChwSDHHpPerfCurrentFEBBE | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the remote background errored block on the HP. | ||||
| ChwSDHHpPerfCurrentFEES | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of remote errored seconds on the HP. | ||||
| ChwSDHHpPerfCurrentFESES | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of severe remote errored seconds on the HP. | ||||
| ChwSDHHpPerfCurrentFEUAS | 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of remote unavailable seconds on the HP. | ||||
| ThwSDHLpPerfCurrentTable | 1.3.6.1.4.1.2011.5.25.157.1.8.4 | NA | ||
table · not-accessible · current This table describes the access and configuration of physical attributes of lower order paths (LPs). | ||||
| RhwSDHLpPerfCurrentEntry | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1 | NA | ||
row · not-accessible · current Indicates the performance stat of the Low order Path. | ||||
| ChwSDHLpPerfCurrentIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current This object indicates the interface index. | ||||
| ChwSDHLpPerfCurrentHpIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the HP index. | ||||
| ChwSDHLpPerfCurrentLpIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.3 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the lower order path (LP) index. | ||||
| ChwSDHLpPerfCurrentDataIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.4 | Integer32 (0..1) | NA | |
column · Integer32 (0..1) · not-accessible · current This object indicates the data index. | ||||
| ChwSDHLpPerfCurrentBBE | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the background errored block of the lower order path (LP). | ||||
| ChwSDHLpPerfCurrentES | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of errored seconds on the lower order path (LP). | ||||
| ChwSDHLpPerfCurrentSES | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of severe errored seconds on the lower order path (LP). | ||||
| ChwSDHLpPerfCurrentUAS | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of unavailable seconds on the lower order path (LP). | ||||
| ChwSDHLpPerfCurrentFEBBE | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the the remote background errored block of the lower order path (LP). | ||||
| ChwSDHLpPerfCurrentFEES | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of remote errored seconds on the lower order path (LP). | ||||
| ChwSDHLpPerfCurrentFESES | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of remote errored seconds on the lower order path (LP). | ||||
| ChwSDHLpPerfCurrentFEUAS | 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of unavailable seconds on the lower order path (LP). | ||||
| ThwPDHPerfCurrentTable | 1.3.6.1.4.1.2011.5.25.157.1.8.5 | NA | ||
table · not-accessible · current This table describes functions of physical interfaces. | ||||
| RhwPDHPerfCurrentEntry | 1.3.6.1.4.1.2011.5.25.157.1.8.5.1 | NA | ||
row · not-accessible · current Indicates the performance stat of the E1 line side. | ||||
| ChwPDHPerfCurrentIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | ||||
| ChwPDHPerfCurrentDataIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.2 | Integer32 (0..1) | NA | |
column · Integer32 (0..1) · not-accessible · current This object indicates the data index. | ||||
| ChwPDHPerfCurrentBBE | 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the background errored block of the higher order path (HP). | ||||
| ChwPDHPerfCurrentES | 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of errored seconds on the E1 line code. | ||||
| ChwPDHPerfCurrentSES | 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of severe errored seconds on the E1 line code. | ||||
| ChwPDHPerfCurrentUAS | 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of seconds for the loss of signals on the E1 line code. | ||||
| ChwPDHPerfCurrentLCV | 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of errors on the E1 line code. | ||||
| ThwEthPortStatTable | 1.3.6.1.4.1.2011.5.25.157.1.8.6 | NA | ||
table · not-accessible · current This table describes the output of error packets and packet length configuration. | ||||
| RhwEthPortStatEntry | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1 | NA | ||
row · not-accessible · current Indicates the stat of the ethernet interface.
| ||||
| ChwEthPortStatIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | ||||
| ChwEthPortStatBadBytes | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the statistics about the Badtypes errors. | ||||
| ChwEthPortStatOutPut64Bytes | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of output data packets each with a length less than or equal to 64 bytes. | ||||
| ChwEthPortStatOutPut65to127Bytes | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of output data packets each with a length ranging from 65 bytes to 127 bytes. | ||||
| ChwEthPortStatOutPut128to255Bytes | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of output data packets each with a length ranging from 128 bytes to 255 bytes. | ||||
| ChwEthPortStatOutPut256to511Bytes | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of output data packets each with a length ranging from 256 bytes to 511 bytes. | ||||
| ChwEthPortStatOutPut512to1023Bytes | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of output data packets each with a length ranging from 512 bytes to 1023 bytes. | ||||
| ChwEthPortStatOutPut1024to1518Bytes | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of output data packets each with a length ranging from 1024 bytes to 1518 bytes. | ||||
| ChwEthPortStatOutPut1519toMaxBytes | 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of sent data packets each with a length greater than or equal to 1519 bytes. | ||||
| NhwPhysicalPortGlobleCfg | 1.3.6.1.4.1.2011.5.25.157.1.8.7 | |||
| ShwLoopBackAutoClearEnable | 1.3.6.1.4.1.2011.5.25.157.1.8.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current set loopback autoclear status enable(1) disable(2).
| ||||
| ShwLoopBackAutoClearPeriod | 1.3.6.1.4.1.2011.5.25.157.1.8.7.2 | Integer32 (1..2880) | RW | |
scalar · Integer32 (1..2880) · read-write · current set loopback autoclear period, unit minute,value range<1-2880> default<5 minute>.
| ||||
| ShwPortAlarmInverseEnable | 1.3.6.1.4.1.2011.5.25.157.1.8.7.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Config globle alarm inverse enable.
| ||||
| ThwEthOamPortLinkTable | 1.3.6.1.4.1.2011.5.25.157.1.8.8 | NA | ||
table · not-accessible · current Set the physical port close enable(1) disable(2) by EthOam. | ||||
| RhwEthOamPortLinkEntry | 1.3.6.1.4.1.2011.5.25.157.1.8.8.1 | NA | ||
row · not-accessible · current Set the physical port close enable(1) disable(2) by EthOam. | ||||
| ChwMepId | 1.3.6.1.4.1.2011.5.25.157.1.8.8.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current the ID of the MEP. | ||||
| ChwUniName | 1.3.6.1.4.1.2011.5.25.157.1.8.8.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current the name of Uni interface that configed EthOam. | ||||
| ThwMEthStatusTable | 1.3.6.1.4.1.2011.5.25.157.1.8.9 | NA | ||
table · not-accessible · current Get management port status. | ||||
| RhwMEthStatusEntry | 1.3.6.1.4.1.2011.5.25.157.1.8.9.1 | NA | ||
| ChwMethIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.8.9.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Interface index(es) of physical port(s) present on the device. | ||||
| ChwMEthPortName | 1.3.6.1.4.1.2011.5.25.157.1.8.9.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The name of management port. | ||||
| ChwMEthPhyStatus | 1.3.6.1.4.1.2011.5.25.157.1.8.9.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The status of management port is 1(up) or 0(down).
| ||||
| ChwMEthIsActive | 1.3.6.1.4.1.2011.5.25.157.1.8.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of management port is 1(active) or 0(inactive).
| ||||
| NhwDslGroup | 1.3.6.1.4.1.2011.5.25.157.1.9 | |||
| ThwDslGroupTable | 1.3.6.1.4.1.2011.5.25.157.1.9.1 | NA | ||
table · not-accessible · current Indicates the attributes of the dsl group. | ||||
| RhwDslGroupEntry | 1.3.6.1.4.1.2011.5.25.157.1.9.1.1 | NA | ||
| ChwDslGroupIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Interface index(es) of dsl group present on the device. | ||||
| ChwDslGroupWorkMode | 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The dsl group of SHD4 card can work in efm or atm mode. Default is efm.
| ||||
| ChwDslGroupBisState | 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Bis can be enabled or disabled in ATM mode of SHD4 card.
| ||||
| ChwDslGroupEncapeMode | 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The dsl group of AVD8 card can work in ETHoA-LLC mode or ETHoA-VCMUX mode. Default is ETHoA-LLC.
| ||||
| ChwDslGroupEnable | 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Trigger the operation of binding dsl link(s) to the dsl group.
| ||||
| ChwDslGroupRowStatus | 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.60 | RowStatus | RC | |
column · RowStatus · read-create · current An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified. | ||||
| ThwDslGroupBoundVeTable | 1.3.6.1.4.1.2011.5.25.157.1.9.2 | NA | ||
table · not-accessible · current Indicates the attributes of the dsl group bound virtual-ethernet. | ||||
| RhwDslGroupBoundVeEntry | 1.3.6.1.4.1.2011.5.25.157.1.9.2.1 | NA | ||
row · not-accessible · current An entry in the dsl group bound vitrual-ethernet table. | ||||
| ChwDslGroupIfIndexOfBound | 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Interface index(es) of dsl group present on the device. | ||||
| ChwVirtualEthernetIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The first virtual ethernet interface which the dsl group is bound to. | ||||
| ChwDslGroupVpi | 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.3 | Integer32 (0..4095) | RW | |
column · Integer32 (0..4095) · read-write · current VPI value of the 1st PVC pair. | ||||
| ChwDslGroupVci | 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.4 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current VCI value of the 1st PVC pair. | ||||
| ChwDslGroupPvcId | 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.5 | Integer32 (1..2) | RO | |
column · Integer32 (1..2) · read-only · current Identifier for VPI/VCI Pair. | ||||
| ChwBoundVeRowStatus | 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.50 | RowStatus | RC | obsolete |
column · RowStatus · read-create · obsolete An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified. | ||||
| ThwDslGroupBindVeTable | 1.3.6.1.4.1.2011.5.25.157.1.9.3 | NA | ||
table · not-accessible · current Indicates the relation of the dsl group binding virtual-ethernet. | ||||
| RhwDslGroupBindVeEntry | 1.3.6.1.4.1.2011.5.25.157.1.9.3.1 | NA | ||
row · not-accessible · current An entry in the dsl group binding vitrual-ethernet table. | ||||
| ChwDslGroupInterfaceIndex | 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Interface index(es) of the dsl group present on the device. | ||||
| ChwVirtualEthernetInterfaceIndex | 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The virtual ethernet interface index which the dsl group is bound to. | ||||
| ChwBindVeRowStatus | 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.50 | RowStatus | RC | |
column · RowStatus · read-create · current An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified. | ||||
| NhwDslGroupIma | 1.3.6.1.4.1.2011.5.25.157.1.10 | |||
| ThwDslGroupImaTable | 1.3.6.1.4.1.2011.5.25.157.1.10.1 | NA | ||
table · not-accessible · current Indicates the attributes of the dsl ima group. | ||||
| RhwDslGroupImaEntry | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1 | NA | ||
| ChwDslGroupImaIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Interface index(es) of dsl group present on the device. | ||||
| ChwDslGroupImaVersion | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Version of the ima group of SHD4I card. v0: ima protocol version 1.0; v1: ima protocol version 1.1.
| ||||
| ChwDslGroupImaFrameLen | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.3 | ImaFrameLength | RW | |
column · ImaFrameLength · read-write · current Frame length of the ima group of SHD4I card. If ima protocol version is 1.0, the frame length is only 128. | ||||
| ChwDslGroupImaReset | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current ima group reset for SHD4I card.
| ||||
| ChwDslGroupImaTxMinLinkNum | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.5 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Minimum active links number by TX direction. | ||||
| ChwDslGroupImaRxMinLinkNum | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.6 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Minimum active links number by RX direction. | ||||
| ChwDslGroupImaNeState | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.7 | ImaGroupState | RO | |
column · ImaGroupState · read-only · current The current state of the near-end ima group. | ||||
| ChwDslGroupImaFeState | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.8 | ImaGroupState | RO | |
column · ImaGroupState · read-only · current The current state of the far-end ima group. | ||||
| ChwDslGroupImaTxCellRate | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The current cell rate of ima group by TX direction. | ||||
| ChwDslGroupImaRxCellRate | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The current cell rate of ima group by RX direction. | ||||
| ChwDslGroupImaTxActLinkNum | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.11 | Integer32 (0..4) | RO | |
column · Integer32 (0..4) · read-only · current Number of active links by TX direction. | ||||
| ChwDslGroupImaRxActLinkNum | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.12 | Integer32 (0..4) | RO | |
column · Integer32 (0..4) · read-only · current Number of active links by RX direction. | ||||
| ChwDslGroupImaIfName | 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The interface name of ima group. | ||||
| NhwDslLink | 1.3.6.1.4.1.2011.5.25.157.1.11 | |||
| ThwDslLinkTable | 1.3.6.1.4.1.2011.5.25.157.1.11.1 | NA | ||
table · not-accessible · current Indicates the dsl link bound relation. | ||||
| RhwDslLinkEntry | 1.3.6.1.4.1.2011.5.25.157.1.11.1.1 | NA | ||
row · not-accessible · current An entry of the dsl link bound relation. | ||||
| ChwBoundDslGroupIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Interface index of dsl group which the dsl link bound to. | ||||
| ChwDslLinkIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.2 | InterfaceIndex | RW | |
column · InterfaceIndex · read-write · current Interface index of the dsl link device. | ||||
| ChwDslLinkIfName | 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The interface name of the dsl link. | ||||
| ChwBoundDslGroupIfName | 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Interface index of dsl group which the dsl link bound to. | ||||
| ChwDslLinkBoundRowStatus | 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.50 | RowStatus | RC | |
column · RowStatus · read-create · current An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified. | ||||
| NhwPWAlarm | 1.3.6.1.4.1.2011.5.25.157.1.12 | |||
| ThwPWAlarmTable | 1.3.6.1.4.1.2011.5.25.157.1.12.1 | NA | ||
table · not-accessible · current Indicates the attributes of the PW alarm. | ||||
| RhwPWAlarmEntry | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1 | NA | ||
| ChwPWAlarmIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Interface index of PW alarm group. | ||||
| ChwPWCesVcID | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Vc ID of PW alarm group. | ||||
| ChwPWCesVcType | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Vc Type of PW alarm group. | ||||
| ChwPeerIpAddr | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Peer IP Address of PW alarm group. | ||||
| ChwAlarmStatus | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.5 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Alarm status of PW alarm group. | ||||
| ChwPWAlarmRMLEnableStatus | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.6 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current PW control word RML of PW alarm group. | ||||
| ChwLosAlarmTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.7 | Integer32 (2..65535) | RW | |
column · Integer32 (2..65535) · read-write · current Trigger Threshold of continuous loss packets of PW alarm group. | ||||
| ChwLosAlarmResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.8 | Integer32 (32..65535) | RW | |
column · Integer32 (32..65535) · read-write · current Resume Threshold of continuous loss packets of PW alarm group. | ||||
| ChwPWPortName | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current PW port name of PW alarm group. | ||||
| ChwLosPktExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Trigger threshold of lost packets of PW alarm group. | ||||
| ChwLosPktExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current Resume threshold of lost packets of PW alarm group. | ||||
| ChwMisorderPktExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.12 | Integer32 | RW | |
column · Integer32 · read-write · current Trigger threshold of packets lost due to the out-of-order condition of PW alarm group. | ||||
| ChwMisorderPktExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current Resume threshold of packets lost due to the out-of-order condition of PW alarm group. | ||||
| ChwStrayPktExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current Trigger threshold of misconnected packets of PW alarm group. | ||||
| ChwStrayPktExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.15 | Integer32 | RW | |
column · Integer32 · read-write · current Resume threshold of misconnected packets of PW alarm group. | ||||
| ChwMalPktExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.16 | Integer32 | RW | |
column · Integer32 · read-write · current Trigger threshold of malformed packets of PW alarm group. | ||||
| ChwMalPktExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.17 | Integer32 | RW | |
column · Integer32 · read-write · current Resume threshold of malformed packets of PW alarm group. | ||||
| ChwJtrUdrExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.18 | Integer32 | RW | |
column · Integer32 · read-write · current Trigger threshold of jitter buffer underflows of PW alarm group. | ||||
| ChwJtrUdrExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.19 | Integer32 | RW | |
column · Integer32 · read-write · current Resume threshold of jitter buffer underflows of PW alarm group. | ||||
| ChwJtrOvrExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.20 | Integer32 | RW | |
column · Integer32 · read-write · current Trigger threshold of jitter buffer overflows of PW alarm group. | ||||
| ChwJtrOvrExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.21 | Integer32 | RW | |
column · Integer32 · read-write · current Resume threshold of jitter buffer overflows of PW alarm group. | ||||
| ThwAtmPWAlarmTable | 1.3.6.1.4.1.2011.5.25.157.1.12.2 | NA | ||
table · not-accessible · current Indicates the attributes of the ATM PW alarm. | ||||
| RhwAtmPWAlarmEntry | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1 | NA | ||
| ChwAtmPWAlarmIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Interface index of ATM PW alarm group. | ||||
| ChwAtmVcID | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Vc ID of ATM PW alarm group. | ||||
| ChwAtmVcType | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Vc Type of ATM PW alarm group. | ||||
| ChwAtmPeerIpAddr | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Peer IP Address of ATM PW alarm group. | ||||
| ChwAtmPWPortName | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ATM PW port name of PW alarm group. | ||||
| ChwAtmLosPktExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.6 | Integer32 (1..1000) | RW | |
column · Integer32 (1..1000) · read-write · current Trigger threshold of lost packets of ATM PW alarm group. | ||||
| ChwAtmLosPktExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.7 | Integer32 (1..1000) | RW | |
column · Integer32 (1..1000) · read-write · current Resume threshold of lost packets of ATM PW alarm group. | ||||
| ChwAtmMisorderPktExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.8 | Integer32 (1..1000) | RW | |
column · Integer32 (1..1000) · read-write · current Trigger threshold of packets lost due to the out-of-order condition of ATM PW alarm group. | ||||
| ChwAtmMisorderPktExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.9 | Integer32 (1..1000) | RW | |
column · Integer32 (1..1000) · read-write · current Resume threshold of packets lost due to the out-of-order condition of ATM PW alarm group. | ||||
| ChwAtmUnknownCellExcTriggerThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.10 | Integer32 (1..1000) | RW | |
column · Integer32 (1..1000) · read-write · current Trigger threshold of unknown cell of ATM PW alarm group. | ||||
| ChwAtmUnknownCellExcResumeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.11 | Integer32 (1..1000) | RW | |
column · Integer32 (1..1000) · read-write · current Resume threshold of unknown cell of ATM PW alarm group. | ||||
| NhwSNMPTrapEn | 1.3.6.1.4.1.2011.5.25.157.1.13 | |||
| ThwSNMPTrapEnTable | 1.3.6.1.4.1.2011.5.25.157.1.13.1 | NA | ||
table · not-accessible · current Reserved nodes do not support this function temporarily. | ||||
| RhwSNMPTrapEnEntry | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1 | NA | ||
row · not-accessible · current Reserved nodes do not support this function temporarily.
| ||||
| ChwSNMPTrapEnIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWLopsEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWRemoteLosPktEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWOppositeRAIEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWOppositeAcfaultEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWLosPktEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWMisorderPktEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWStrayPktEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWMalPktEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWJtrUnrEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWJtrOvrEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwCesPWAllEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.12 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwPhysicalPortLosAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwPhysicalPortLofAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwRsOofAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.15 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwRsB1ExcAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.16 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwRsB1SdAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.17 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwRsJ0TimAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.18 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwMsRdiAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.19 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwMsB2ExcAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.20 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwMsAuLopAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.21 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwMsAisAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.22 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwMsB2SdAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.23 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwHpJ1TimAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.24 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwHpUneqAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.25 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwHpRdiAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.26 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwHpB3ExcAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.27 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwHpPlmAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.28 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwHpB3SdAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.29 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwHpAuAisAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.30 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpTuLopAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.31 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwHpTuLomAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.32 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpTimAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.33 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpUneqAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.34 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpRdiAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.35 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpBipExcAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.36 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpBipSdAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.37 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpPlmAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.38 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpTuAisAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.39 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwDs1EsExcAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.40 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwDs1RmfaAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.41 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwDs1LmfaAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.42 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwDs1AisAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.43 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwDs1RdiAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.44 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwRsLocAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.45 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpRfiAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.46 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLpV5VcaisAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.47 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwVc12oofAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.48 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwVc12AlmE1RaiAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.49 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwVc12LfaAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.50 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwVc12UpE1AisAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.51 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwVc12DownE1AisAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.52 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwDs1DownE1AisAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.53 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwMsLpsUniBiMAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.54 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwMsK1K2MAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.55 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwMsK2MAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.56 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwVc12LmfaAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.57 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwSDHAllEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.58 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLaserShutAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.59 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLaserAutoShutAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.60 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLaserAllEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.61 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLoopbackAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.62 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwChannelLoopbackAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.63 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwLoopbackAllEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.64 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwAtmOcdAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.65 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwAtmLcdAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.66 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwAtmUhcsAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.67 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwAtmChcsAlarmEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.68 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwAtmPWLosPktEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.69 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwAtmPWMisorderPktEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.70 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwAtmPWUnknownCellEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.71 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| ChwAtmAllEn | 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.72 | Integer32 | RW | |
column · Integer32 · read-write · current Reserved nodes do not support this function temporarily. | ||||
| NhwPortAlarmThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14 | |||
| ThwPortAlarmThresholdTable | 1.3.6.1.4.1.2011.5.25.157.1.14.1 | NA | ||
table · not-accessible · current This table describes alarm statistics and alarm thresholds on interfaces. | ||||
| RhwPortAlarmThresholdEntry | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1 | NA | ||
row · not-accessible · current Indicates the port alarm threshold. This table lists the threshold of various port alarm. | ||||
| ChwPhysicalPortThrIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current This object indicates the index of a physical interface. | ||||
| ChwPhysicalPortThrName | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current This object indicates the name of a physical interface. | ||||
| ChwPhysicalPortCrcErrorStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the CRC error statistics. | ||||
| ChwPhysicalPortCrcErrorHighThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.4 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the upper threshold for the number of CRC errors. The default value is 1000 pps. | ||||
| ChwPhysicalPortCrcErrorLowThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.5 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the lower threshold for the number of CRC errors. The default value is 100 pps. | ||||
| ChwPhysicalPortCrcErrorInterval | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.6 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This object indicates the time threshold for the CRC error alarm. The default value is 10s. | ||||
| ChwPhysicalPortSymbolErrorStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of Symbol errors. | ||||
| ChwPhysicalPortSymbolErrorHighThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.8 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the upper threshold for the number of Symbol errors. The default value is 1000 pps. | ||||
| ChwPhysicalPortSymbolErrorLowThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.9 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the lower threshold for the number of Symbol errors. The default value is 100 pps. | ||||
| ChwPhysicalPortSymbolErrorInterval | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.10 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This object indicates the time threshold for the Symbol error alarm. The default value is 10s. | ||||
| ChwPhysicalPortInputErrorStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of Input errors. | ||||
| ChwPhysicalPortInputErrorHighThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.12 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the upper threshold for the number of Input errors. The default value is 1000 pps. | ||||
| ChwPhysicalPortInputErrorLowThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.13 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the lower threshold for the number of Input errors. The default value is 100 pps. | ||||
| ChwPhysicalPortInputErrorInterval | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.14 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This object indicates the time threshold for the Input error alarm. The default value is 10s. | ||||
| ChwPhysicalPortOutputErrorStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of Output errors. | ||||
| ChwPhysicalPortOutputErrorHighThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.16 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the upper threshold for the number of Output errors. The default value is 1000 pps. | ||||
| ChwPhysicalPortOutputErrorLowThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.17 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the lower threshold for the number of Output errors. The default value is 100 pps. | ||||
| ChwPhysicalPortOutputErrorInterval | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.18 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This object indicates the time threshold for the Output error alarm. The default value is 10s. | ||||
| ChwPhysicalPortSdhErrorStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of SDH errors. | ||||
| ChwPhysicalPortSdhErrorHighThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.20 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the upper threshold for the number of SDH errors. The default value is 1000 pps. | ||||
| ChwPhysicalPortSdhErrorLowThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.21 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current This object indicates the lower threshold for the number of SDH errors. The default value is 100 pps. | ||||
| ChwPhysicalPortSdhErrorInterval | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.22 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This object indicates the time threshold for the SDH error alarm. The default value is 10s. | ||||
| ChwPhysicalPortBIP8SDErrorThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.23 | Unsigned32 (0 | 6..9) | RW | |
column · Unsigned32 (0 | 6..9) · read-write · current This object indicates the BIP8 SD alarm threshold. The default value is 6. | ||||
| ChwPhysicalPortCrcPerAlarmThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.24 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates the coefficient x in the (xE-y) alarm threshold for the CRC error packet ratio on a physical interface. | ||||
| ChwPhysicalPortCrcPerAlarmThresholdPower | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.25 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates the power y in the (xE-y) alarm threshold for the CRC error packet ratio on a physical interface. | ||||
| ChwPhysicalPortCrcPerResumeThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.26 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates the coefficient x in the (xE-y) clear alarm threshold for the CRC error packet ratio on a physical interface. | ||||
| ChwPhysicalPortCrcPerResumeThresholdPower | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.27 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates the power y in the (xE-y) clear alarm threshold for the CRC error packet ratio on a physical interface. | ||||
| ChwPhysicalPortCrcPerTriggerLsp | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.28 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates whether the CRC error packet ratio alarm and its clear alarm on a physical interface are associated with LSPs. | ||||
| ChwPhysicalPortCrcPerCurrentValueString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.29 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current This object indicates that the thresholds for CRC error packet ratio alarms on a physical interface are sent to the NMS in the character string format. | ||||
| ChwPhysicalPortCrcPerAlarmThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.30 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current This object indicates that the generation threshold for the CRC error packet ratio alarm on a physical interface is sent to the NMS in the character string format. | ||||
| ChwPhysicalPortCrcPerResumeThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.31 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current This object indicates that the clearing threshold for the CRC error packet ratio clear alarm on a physical interface is sent to the NMS in the character string format. | ||||
| ChwPhysicalPortCrcPerTriggerSection | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.32 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates whether the CRC error packet ratio alarm and its clear alarm on a physical interface are associated with sections. | ||||
| ChwPhysicalPortAlarmTypeThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.33 | INTEGER | RW | |
column · INTEGER · read-write · current 0: indicates that the upper and lower thresholds triggering error packet alarms are enabled. 1: indicates that the alarm function for CRC error packets is enabled. 2: indicates that the alarm function for CRC bit errors is enabled.
| ||||
| ChwPhysicalPortCrcSdAlarmThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.34 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The coefficient value of MAC_FCS_SD alarm threshold. The range is 1 to 9. | ||||
| ChwPhysicalPortCrcSdAlarmThresholdPower | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.35 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The power value of MAC_FCS_SD alarm threshold. The range is 5 to 9. | ||||
| ChwPhysicalPortCrcSdResumeThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.36 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The coefficient value of MAC_FCS_SD resume threshold. The range is 1 to 9. | ||||
| ChwPhysicalPortCrcSdResumeThresholdPower | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.37 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The power value of MAC_FCS_SD resume threshold. The range is 5 to 9. | ||||
| ChwPhysicalPortCrcExcAlarmThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.38 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The coefficient value of MAC_FCS_EXC alarm threshold. The range is 1 to 9. | ||||
| ChwPhysicalPortCrcExcAlarmThresholdPower | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.39 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The power value of MAC_FCS_EXC alarm threshold. The range is 2 to 5. | ||||
| ChwPhysicalPortCrcExcResumeThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.40 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The coefficient value of MAC_FCS_EXC resume threshold. The range is 1 to 9. | ||||
| ChwPhysicalPortCrcExcResumeThresholdPower | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.41 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The power value of MAC_FCS_EXC resume threshold. The range is 2 to 5. | ||||
| ChwPhysicalPortCrcSdAlarmThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.42 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The alarm threshold of MAC_FCS_SD. | ||||
| ChwPhysicalPortCrcSdResumeThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.43 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The resume threshold of MAC_FCS_SD. | ||||
| ChwPhysicalPortCrcExcAlarmThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.44 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The alarm threshold of MAC_FCS_EXC. | ||||
| ChwPhysicalPortCrcExcResumeThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.45 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The resume threshold of MAC_FCS_EXC. | ||||
| ChwPhysicalPortCrcPerAlarmCoefficientStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.46 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The coefficient value of CRC-PER(Packet Error Ratio) alarm statistics. | ||||
| ChwPhysicalPortCrcPerAlarmPowerStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.47 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The power value of CRC-PER(Packet Error Ratio) alarm statistics. | ||||
| ChwPhysicalPortCrcSdAlarmTriggerLsp | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.48 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the SD alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled.
| ||||
| ChwPhysicalPortCrcExcAlarmTriggerLsp | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.49 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the EXC alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled.
| ||||
| ChwPhysicalPortCrcPerWarningThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.50 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The coefficient value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 9. | ||||
| ChwPhysicalPortCrcPerWarningThresholdPower | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.51 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The power value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 7. | ||||
| ChwPhysicalPortCrcPerWarningResumeThresholdCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.52 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The coefficient value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 9. | ||||
| ChwPhysicalPortCrcPerWarningResumeThresholdPower | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.53 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The power value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 7. | ||||
| ChwPhysicalPortCrcPerWarningThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.54 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The warning threshold of CRC-PER(Packet Error Ratio). | ||||
| ChwPhysicalPortCrcPerWarningResumeThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.55 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The warning resume threshold of CRC-PER(Packet Error Ratio). | ||||
| ChwPhysicalPortPreFecCoefficientStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.56 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The coefficient value of PRE-FEC bit-error-ratio statistics. | ||||
| ChwPhysicalPortPreFecPowerStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.57 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The power value of PRE-FEC bit-error-ratio statistics. | ||||
| ChwPhysicalPortErrorPerCurrentValueString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.58 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The current value of error packets per second(Packet Error Ratio). | ||||
| ChwPhysicalPortErrorPerAlarmThresholdString | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.59 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The warning threshold of error packets per second(Packet Error Ratio). | ||||
| ChwInputBroadcastChangeThreshold | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.60 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current input broadcast rate Threshold. | ||||
| ChwCurrentStatisticalInputBroadcast | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.61 | Counter64 | RO | |
column · Counter64 · read-only · current current statistics of input broadcast. | ||||
| ChwBaseStatisticalInputBroadcast | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.62 | Counter64 | RO | |
column · Counter64 · read-only · current base statistics of input broadcast. | ||||
| ChwPhysicalPortInputStatistics | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.63 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the input packets statistics. | ||||
| ChwPhysicalPortCrcErrorRatioInterval | 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.64 | Unsigned32 (10..65535) | RW | |
column · Unsigned32 (10..65535) · read-write · current This object indicates the time threshold for the ratio of CRC error alarm. | ||||
| NhwPortAlarmDownEnable | 1.3.6.1.4.1.2011.5.25.157.1.15 | |||
| ThwPortAlarmDownEnableTable | 1.3.6.1.4.1.2011.5.25.157.1.15.1 | NA | ||
table · not-accessible · current This table describes association between interface alarms and the interface status. | ||||
| RhwPortAlarmDownEnableEntry | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1 | NA | ||
row · not-accessible · current Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm. | ||||
| ChwPhysicalPortDownIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | ||||
| ChwPhysicalPortDownName | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.2 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current This object indicates the name of a physical interface. | ||||
| ChwPhysicalPortCrcEnabledDown | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates association between the CRC error alarm and the interface status. If a CRC error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
| ||||
| ChwPhysicalPortSymbolEnabledDown | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates association between the Symbol error alarm and the interface status. If a Symbol error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
| ||||
| ChwPhysicalPortInputEnabledDown | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates association between the Input error alarm and the interface status. If an Input error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
| ||||
| ChwPhysicalPortOutputEnabledDown | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates association between the Output error alarm and the interface status. If an Output error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
| ||||
| ChwPhysicalPortSdhEnabledDown | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates association between the SDH error alarm and the interface status. If an SDH error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
| ||||
| ChwPhysicalPortBip8SdEnabledDown | 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Enalbe or disable the BIP8-SD error alarm result in physics down, and the default value is disable.
| ||||
| NhwPortProtectGroupCfg | 1.3.6.1.4.1.2011.5.25.157.1.16 | |||
| ThwPortProtectGroupCfgTable | 1.3.6.1.4.1.2011.5.25.157.1.16.1 | NA | ||
table · not-accessible · current The table includes the information of the port protect group configuration information, and include the port group, working status of port etc. | ||||
| RhwPortProtectGroupCfgEntry | 1.3.6.1.4.1.2011.5.25.157.1.16.1.1 | NA | ||
row · not-accessible · current The table includes the information of the port protect group configuration information. The index of the table is hwPortProtectGroupId.
| ||||
| ChwPortProtectGroupId | 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.1 | Integer32 (0..127) | RO | |
column · Integer32 (0..127) · read-only · current Port protect group index. | ||||
| ChwPortProtectMasterIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The master interface index of port protect group. | ||||
| ChwPortProtectMasterStatus | 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Working status of master port , include work, protect, down. work: the port in group is active. protect: master port is protect port. down: master port is inactive.
| ||||
| ChwPortProtectSlaveIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The slave interface index of port protect group. | ||||
| ChwPortProtectSlaveStatus | 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Working status of slave port , include work, protect, down. work: the port in group is active. protect: slave port is protect port. down: slave port is inactive.
| ||||
| ChwPortProtectRowStatus | 1.3.6.1.4.1.2011.5.25.157.1.16.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Status of port protect group row. | ||||
| NhwPortLine | 1.3.6.1.4.1.2011.5.25.157.1.17 | |||
| ThwPortLineTable | 1.3.6.1.4.1.2011.5.25.157.1.17.1 | NA | ||
table · not-accessible · current Indicates the link attributes of the interface. This table lists the link attributes of the interface. | ||||
| RhwPortLineEntry | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1 | NA | ||
row · not-accessible · current Indicates the link attributes of the interface. This table lists the link attributes of the interface.
| ||||
| ChwPortLineIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Interface index(es) of port(s) present on the device . | ||||
| ChwPortLineUpStreampbo | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the upstream power back-off of the interface. | ||||
| ChwPortLineDownStreampbo | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the downstream power back-off of the interface. | ||||
| ChwPortLineUpStreamLoopAtten | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the upstream loopback attenuation of the interface. | ||||
| ChwPortLineDownStreamLoopAtten | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the downstream loopback attenuation of the interface. | ||||
| ChwPortLineUpStreamSnrMargin | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the upstream SNR margin of the interface. | ||||
| ChwPortLineDownStreamSnrMargin | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the downstream SNR margin of the interface. | ||||
| ChwPortLineSpeed | 1.3.6.1.4.1.2011.5.25.157.1.17.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the negotiated rate of the interface. | ||||
| NhwPortIfStatistics | 1.3.6.1.4.1.2011.5.25.157.1.18 | |||
| ThwPortIfStatTable | 1.3.6.1.4.1.2011.5.25.157.1.18.1 | NA | ||
table · not-accessible · current This table lists the number of packets of the interface. | ||||
| RhwPortIfStatEntry | 1.3.6.1.4.1.2011.5.25.157.1.18.1.1 | NA | ||
row · not-accessible · current This table lists the number of packets of the interface.
| ||||
| ChwPortIfStatIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.18.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Interface index(es) of port(s) present on the device . | ||||
| ChwPortIfStatIfInCrcPkts | 1.3.6.1.4.1.2011.5.25.157.1.18.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the number of packets which the CRC operates. | ||||
| ThwIPIfStatTable | 1.3.6.1.4.1.2011.5.25.157.1.18.2 | NA | ||
table · not-accessible · current This table lists the number of ip packets of the interface. | ||||
| RhwIPIfStatEntry | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1 | NA | ||
row · not-accessible · current This table lists the number of ip packets of the interface. | ||||
| ChwIpIfStatsIPVersion | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The version of packets protocol.
| ||||
| ChwIpIfStatsIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current Interface index(es) of port(s) present on the device . | ||||
| ChwIpIfInOctetRate | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The ip rate of octets received on the interface . | ||||
| ChwIpIfInPktRate | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The ip rate of packets received on the interface . | ||||
| ChwIpIfOutOctetRate | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The ip rate of octets transmitted out of the interface . | ||||
| ChwIpIfOutPktRate | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The ip rate of packets transmitted out of the interface . | ||||
| ChwIpIfInOctets | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The ip octets received on the interface . | ||||
| ChwIpIfInPkts | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The ip packets received on the interface . | ||||
| ChwIpIfOutOctets | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The ip octets transmitted out of the interface . | ||||
| ChwIpIfOutPkts | 1.3.6.1.4.1.2011.5.25.157.1.18.2.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The ip packets transmitted out of the interface . | ||||
| NhwPortDescription | 1.3.6.1.4.1.2011.5.25.157.1.19 | |||
| ThwPortDescriptionTable | 1.3.6.1.4.1.2011.5.25.157.1.19.1 | NA | ||
table · not-accessible · current This table lists the description of interfaces. | ||||
| RhwPortDescriptionEntry | 1.3.6.1.4.1.2011.5.25.157.1.19.1.1 | NA | ||
row · not-accessible · current This table lists the description of interfaces. | ||||
| ChwPortDescriptionIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.19.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Interface index(es) of port(s) present on the device. | ||||
| ChwPortDescriptionIfPortDescription | 1.3.6.1.4.1.2011.5.25.157.1.19.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the description of ports.
| ||||
| NhwPRBSTestInfo | 1.3.6.1.4.1.2011.5.25.157.1.20 | |||
| ThwPRBSTestPortStatusTable | 1.3.6.1.4.1.2011.5.25.157.1.20.1 | NA | ||
table · not-accessible · current This table lists the capability and result of PRBS test. | ||||
| RhwPRBSTestPortStatusEntry | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1 | NA | ||
row · not-accessible · current This table lists the capability and result of PRBS test. | ||||
| ChwPRBSTestPortStatusIfName | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.1 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Interface name of port(s) present on the device. | ||||
| ChwPRBSTestPortStatusSide | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate PRBS test side.
| ||||
| ChwPRBSTestPortStatusSuportFlag | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Whether PRBS test supported.
| ||||
| ChwPRBSTestPortStatusPatternBitmap | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate supported PRBS pattern by bitmap. bit 0 - 3 : PRBS15, PRBS20, PRBS23, QRSS, bit 4 - 7 : 0S, 1S, ALT-0-1, 1IN8, bit 8 - 11 : 3IN24, PRBS6, PRBS9, PRBS11, bit 12 : QRW | ||||
| ChwPRBSTestPortStatusErrInsertLevel | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the supported err-insert level.
It's described by bitmap. From low to high, the different bit position indicates whether or not support 1, 1e-1, 1e-2, 1e-3, etc.
e.g. 0x1FC (0b111111100): Range from 1e-2 to 1e-8 supported.
0xA (0b1010) : Only 1e-1 and 1e-3 supported. | ||||
| ChwPRBSTestPortStatusSlotNum | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Slot ID of the testing phyicial port. | ||||
| ChwPRBSTestPortStatusCardNum | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Card ID of the testing phyicial port. | ||||
| ChwPRBSTestPortStatusPhyPortIfName | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.8 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Interface Name of the testing phyicial port. | ||||
| ChwPRBSTestPortStatusResultCount | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Total count of PRBS test history result. | ||||
| ChwPRBSTestPortStatusOngoingTestIndex | 1.3.6.1.4.1.2011.5.25.157.1.20.1.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the ongoing PRBS testing index of current interface. | ||||
| ThwPRBSTestResultTable | 1.3.6.1.4.1.2011.5.25.157.1.20.2 | NA | ||
table · not-accessible · current This table lists PRBS test result info. | ||||
| RhwPRBSTestResultEntry | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1 | NA | ||
row · not-accessible · current This table lists PRBS test result info. | ||||
| ChwPRBSTestResultIfName | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.1 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Interface name of port(s) present on the device. | ||||
| ChwPRBSTestResultTestIndex | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the PRBS test hisotry test index. 0 is invalid. | ||||
| ChwPRBSTestResultPhyPortIfName | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.3 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Interface Name of the testing phyicial port. | ||||
| ChwPRBSTestResultSide | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate PRBS test side.
| ||||
| ChwPRBSTestResultPattern | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate PRBS pattern. Refer to hwPRBSTestPortStatusPatternBitmap, but single bit here. | ||||
| ChwPRBSTestResultIntervalTime | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Period time of each interval, in second. | ||||
| ChwPRBSTestResultIntervalCount | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PRBS test interval repeat count. | ||||
| ChwPRBSTestResultTestingIntervalIndex | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the ongoing testing interval index. | ||||
| ChwPRBSTestResultStartTime | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.9 | DateAndTime | RO | |
column · DateAndTime · read-only · current Start time of the test. | ||||
| ChwPRBSTestResultStopTime | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.10 | DateAndTime | RO | |
column · DateAndTime · read-only · current Stop time of the test. | ||||
| ChwPRBSTestResultProgress | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Prgress of the test. 100 means 100%. | ||||
| ChwPRBSTestResultRemainTime | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Remaining time of the test, in second. | ||||
| ChwPRBSTestResultErrInserted | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Whether error-bit inserted of the test
| ||||
| ChwPRBSTestResultTotalBit | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current Total-bit of the test. | ||||
| ChwPRBSTestResultErrorBit | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current Error-bit of the test. | ||||
| ChwPRBSTestResultBerCoe | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The coefficient value of bit-error-ratio. | ||||
| ChwPRBSTestResultBerPow | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The power value of bit-error-ratio. | ||||
| ChwPRBSTestResultLos | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Loss of sync second. | ||||
| ChwPRBSTestResultEs | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Error second. | ||||
| ChwPRBSTestResultEfs | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.20 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Error free second. | ||||
| ChwPRBSTestResultSes | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.21 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Severely error second, comparing with 1E-3. | ||||
| ChwPRBSTestResultUas | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.22 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES. | ||||
| ChwPRBSTestResultSegmentTime | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.23 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Period time of each segment, in second. | ||||
| ChwPRBSTestResultSegmentTotalCount | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.24 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Segment count of the whole PRBS test. | ||||
| ChwPRBSTestResultTestingSegmentIndex | 1.3.6.1.4.1.2011.5.25.157.1.20.2.1.25 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the ongoing testing segment index. | ||||
| ThwPRBSTestIntervalTable | 1.3.6.1.4.1.2011.5.25.157.1.20.3 | NA | ||
table · not-accessible · current This table lists PRBS test interval info. | ||||
| RhwPRBSTestIntervalEntry | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1 | NA | ||
row · not-accessible · current This table lists PRBS test interval info. | ||||
| ChwPRBSTestIntervalIfName | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.1 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Interface name of port(s) present on the device. | ||||
| ChwPRBSTestIntervalTestIndex | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the PRBS test hisotry test index. 0 is invalid. | ||||
| ChwPRBSTestIntervalIndex | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.3 | Unsigned32 (0..60) | RO | |
column · Unsigned32 (0..60) · read-only · current Indicate the interval index of a test. 0 is invalid. | ||||
| ChwPRBSTestIntervalStartTime | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.4 | DateAndTime | RO | |
column · DateAndTime · read-only · current Start time of the interval. | ||||
| ChwPRBSTestIntervalStopTime | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.5 | DateAndTime | RO | |
column · DateAndTime · read-only · current Stop time of the interval | ||||
| ChwPRBSTestIntervalProgress | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Prgress of the interval. 100 means 100%. | ||||
| ChwPRBSTestIntervalRemainTime | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Remaining time of the interval, in second. | ||||
| ChwPRBSTestIntervalErrInserted | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Whether error-bit inserted of the interval
| ||||
| ChwPRBSTestIntervalTotalBit | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Total-bit of the interval. | ||||
| ChwPRBSTestIntervalErrorBit | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Error-bit of the interval. | ||||
| ChwPRBSTestIntervalBerCoe | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The coefficient value of bit-error-ratio. | ||||
| ChwPRBSTestIntervalBerPow | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The power value of bit-error-ratio. | ||||
| ChwPRBSTestIntervalLos | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Loss of sync second. | ||||
| ChwPRBSTestIntervalEs | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Error second. | ||||
| ChwPRBSTestIntervalEfs | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Error free second. | ||||
| ChwPRBSTestIntervalSes | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Severely error second, comparing with 1E-3. | ||||
| ChwPRBSTestIntervalUas | 1.3.6.1.4.1.2011.5.25.157.1.20.3.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES. | ||||
| ThwPRBSTestSegmentTable | 1.3.6.1.4.1.2011.5.25.157.1.20.4 | NA | ||
table · not-accessible · current This table lists PRBS test segment info. | ||||
| RhwPRBSTestSegmentEntry | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1 | NA | ||
row · not-accessible · current This table lists PRBS test segment info. | ||||
| ChwPRBSTestSegmentIfName | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.1 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Interface name of port(s) present on the device. | ||||
| ChwPRBSTestSegmentTestIndex | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the PRBS test index. 0 is invalid. | ||||
| ChwPRBSTestSegmentIndex | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.3 | Unsigned32 (0..864000) | RO | |
column · Unsigned32 (0..864000) · read-only · current Indicate the segment index of a test. 0 is invalid. | ||||
| ChwPRBSTestSegmentStartTime | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.4 | DateAndTime | RO | |
column · DateAndTime · read-only · current Start time of the interval. | ||||
| ChwPRBSTestSegmentEndTime | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.5 | DateAndTime | RO | |
column · DateAndTime · read-only · current Stop time of the interval | ||||
| ChwPRBSTestSegmentTotalBit | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Total-bit of the segment. | ||||
| ChwPRBSTestSegmentErrorBit | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Error-bit of the segment. | ||||
| ChwPRBSTestSegmentBerCoe | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The coefficient value of bit-error-ratio. | ||||
| ChwPRBSTestSegmentBerPow | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The power value of bit-error-ratio. | ||||
| ChwPRBSTestSegmentLos | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Loss of sync second. | ||||
| ChwPRBSTestSegmentEs | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Error second. | ||||
| ChwPRBSTestSegmentEfs | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Error free second. | ||||
| ChwPRBSTestSegmentSes | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Severely error second, comparing with 1E-3. | ||||
| ChwPRBSTestSegmentUas | 1.3.6.1.4.1.2011.5.25.157.1.20.4.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES. | ||||
| NhwOtn | 1.3.6.1.4.1.2011.5.25.157.1.21 | |||
| ThwOtnTable | 1.3.6.1.4.1.2011.5.25.157.1.21.1 | NA | ||
table · not-accessible · current This table lists the OTN attributes of WDM interfaces. | ||||
| RhwOtnEntry | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1 | NA | ||
row · not-accessible · current This table lists the otn attributes of the WDM interface.
| ||||
| ChwOtnIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | ||||
| ChwOtnFecMode | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the forward error correction (FEC) mode. By default, the FEC mode is standard.
| ||||
| ChwOtnFec0bitStatistics | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of 0 bits corrected by FEC. | ||||
| ChwOtnFec1bitStatistics | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of 1 bits corrected by FEC. | ||||
| ChwOtnFec0And1TypeStatistics | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of 0 bits and the number of 1 bits corrected by FEC. | ||||
| ChwOtnFecSymbolErrStatistics | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of bytes corrected by FEC. | ||||
| ChwOtnFecUncorrectErrStatistics | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of blocks that cannot be corrected by FEC. | ||||
| ChwOtnPreFecBERCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the coefficient for bit error statistics before FEC. | ||||
| ChwOtnPreFecBERPower | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the power for bit error statistics before FEC. | ||||
| ChwOtnAfterFecBERCoefficient | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the coefficient for bit error statistics after FEC. | ||||
| ChwOtnAfterFecBERPower | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the power for bit error statistics after FEC. | ||||
| ChwOtnOSNR | 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the optical signal-to-noise ratio. | ||||
| NhwLogicalPort | 1.3.6.1.4.1.2011.5.25.157.1.22 | |||
| ThwLogicalPortTable | 1.3.6.1.4.1.2011.5.25.157.1.22.1 | NA | ||
table · not-accessible · current This table lists the working status of the logical ports. | ||||
| RhwLogicalPortEntry | 1.3.6.1.4.1.2011.5.25.157.1.22.1.1 | NA | ||
row · not-accessible · current This table lists the working status of the logical ports.
| ||||
| ChwLogicalPortIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.22.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Interface index(es) of the logical port(s) present on the device . | ||||
| ChwLogicalPortStatisticEnable | 1.3.6.1.4.1.2011.5.25.157.1.22.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the statistic enable status of the logical port(s) .
| ||||
| NhwNarrowBand | 1.3.6.1.4.1.2011.5.25.157.1.23 | |||
| ThwEmTable | 1.3.6.1.4.1.2011.5.25.157.1.23.1 | NA | ||
table · not-accessible · current This table lists the attributes of all E&M interfaces. | ||||
| RhwEmEntry | 1.3.6.1.4.1.2011.5.25.157.1.23.1.1 | NA | ||
row · not-accessible · current This table lists the attributes of all E&M interfaces.
| ||||
| ChwEmIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The value of this object identifies the index of an E&M interface. | ||||
| ChwEmPcmMode | 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the PCM mode of an E&M interface. The value can be A-Law or U-Law. The default value is A-Law.
| ||||
| ChwEmSignalMode | 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the signaling mode of an E&M interface. The value can be Bell-1,Bell-2,Bell-3,Bell-4 or Bell-5. The default value is Bell-5.
| ||||
| ChwEmReceiveGain | 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.4 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This object indicates the receive gain of an E&M interface. The value ranges from -20 to 1.5 with a step of 0.5, in dB. The default value is 0 dB. | ||||
| ChwEmSendGain | 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.5 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This object indicates the transmit gain of an E&M interface. The value ranges from -7 to 13.5 with a step of 0.5, in dB. The default value is 0 dB. | ||||
| ChwEmUserLine | 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the user line mode of an E&M interface. The value can be 2-wire or 4-wire. The default value is 4-wire.
| ||||
| ThwFxsoTable | 1.3.6.1.4.1.2011.5.25.157.1.23.2 | NA | ||
table · not-accessible · current This table lists the attributes of all FXS/FXO interfaces. | ||||
| RhwFxsoEntry | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1 | NA | ||
row · not-accessible · current This table lists the attributes of all FXS/FXO interfaces.
| ||||
| ChwFxsoIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The value of this object identifies the index of an FXS/FXO. | ||||
| ChwFxsoPortMode | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the type of an FXS/FXO interface. For NED1MPAA/CR23MPAA PICs, the last four ports (ports 6, 7, 8, and 9) can work either in fxo or fxs mode. The default mode is fxo.
| ||||
| ChwFxsoPcmMode | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the PCM mode of an FXS/FXO interface. The value can be A-Law or U-Law. The default value is A-Law.
| ||||
| ChwFxsCurrent | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the current of an FXS interface. The value can be 16mA or 20mA. The default value is 16mA.
| ||||
| ChwFxsImpedance | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.5 | Integer32 (0..15 | 255) | RW | |
column · Integer32 (0..15 | 255) · read-write · current This object indicates the impedance of an FXS interface.The value can be: value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm + (780 ohm || 150 nF) value 3: 220 ohm + (820 ohm || 120 nF) and 220 ohm + (820 ohm || 115 nF) value 4: 370 ohm + (620 ohm || 310 nF) value 5: 320 ohm + (1050 ohm || 230 nF) value 6: 370 ohm + (820 ohm || 110 nF) value 7: 275 ohm + (780 ohm || 115 nF) value 8: 20 ohm + (820 ohm || 110 nF) value 9: 350 ohm + (1000 ohm || 210 nF) value 10:200 ohm + (680 ohm || 100 nF) value 11:600 ohm + 2.16 uF value 12:900 ohm + 1 uF value 13:900 ohm + 2.16 uF value 14:600 ohm + 1 uF value 15: Global impedance The default value is 600 ohm. The value 255 indicates that the interface does not support this function. | ||||
| ChwFxsReceiveGain | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.6 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This object indicates the receive gain of an FXS interface. The value ranges from -12 to 0 with a step of 0.5, in dB. The default value is -7 dB. | ||||
| ChwFxsSendGain | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.7 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This object indicates the transmit gain of an FXS interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. | ||||
| ChwFxsLineLock | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates whether line lock is enabled for an FXS interface. The value can be enable or disable. The default value is enable.
| ||||
| ChwFxsHotLine | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates whether the hotline function is enabled for an FXS interface. The value can be enable or disable. The default value is enable.
| ||||
| ChwFxoFeedMaxVoltage | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.10 | Integer32 (-100..0) | RW | |
column · Integer32 (-100..0) · read-write · current This object indicates the maximum feed voltage allowed by an FXO interface. The value ranges from -100 to 0. The default value is -20V. | ||||
| ChwFxoFeedMinVoltage | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.11 | Integer32 (-100..0) | RW | |
column · Integer32 (-100..0) · read-write · current This object indicates the minimum feed voltage allowed by an FXO interface. The value ranges from -100 to 0. The default value is -80V. | ||||
| ChwFxoFeedMaxCurrent | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the maximum feed current allowed by an FXO interface. The value can be 25mA,30mA,35mA or 40mA. The default value is 35mA.
| ||||
| ChwFxoFeedMinCurrent | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the minimum feed current allowed by an FXO interface. The value can be 16mA,17mA,18mA,19mA or 20mA. The default value is 16mA.
| ||||
| ChwFxoReceiveGain | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.14 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This object indicates the receive gain of an FXO interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. | ||||
| ChwFxoSendGain | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.15 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This object indicates the transmit gain of an FXO interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. | ||||
| ChwFxoDcImpedance | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the DC impedance of an FXO interface. The value can be 50 ohm or 800 ohm. The default value is 50 ohm.
| ||||
| ChwFxoAcImpedance | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.17 | Integer32 (0..15 | 255) | RW | |
column · Integer32 (0..15 | 255) · read-write · current This object indicates the AC impedance of an FXO interface.The value can be: value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm + (780 ohm || 150 nF) value 3: 220 ohm + (820 ohm || 120 nF) and 220 ohm + (820 ohm || 115 nF) value 4: 370 ohm + (620 ohm || 310 nF) value 5: 320 ohm + (1050 ohm || 230 nF) value 6: 370 ohm + (820 ohm || 110 nF) value 7: 275 ohm + (780 ohm || 115 nF) value 8: 20 ohm + (820 ohm || 110 nF) value 9: 350 ohm + (1000 ohm || 210 nF) value 10:200 ohm + (680 ohm || 100 nF) value 11:600 ohm + 2.16 uF value 12:900 ohm + 1 uF value 13:900 ohm + 2.16 uF value 14:600 ohm + 1 uF value 15: Global impedance The default value is 600 ohm. The value 255 indicates that the interface does not support this function. | ||||
| ChwFxoRingMinDuration | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the minimum duration that an FXO interface takes to confirm a ringing current. The value can be 100ms,150ms,200ms,256ms,384ms,512ms,640ms or 1024ms. The default value is 200ms.
| ||||
| ChwFxoRingMaxInterval | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates a ringing current timeout period on a FXO interface. The default value is notuse.
| ||||
| ChwFxoRingFrequence | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates a ringing current's frequency detected by an FXO interface. The value can be 16hz,25hz or 50hz. The default value is 25hz.
| ||||
| ChwFxoRingAcAmplitude | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates a ringing current's AC amplitude detected by an FXO interface. The value can be 74V,65V or 50V. The default value is 50V.
| ||||
| ChwFxoRingOffset | 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.22 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current This object indicates a ringing current's AC offset detected by an FXO interface. The value ranges from 0 to 100. The default value is 70mA. | ||||
| ThwRsTable | 1.3.6.1.4.1.2011.5.25.157.1.23.3 | NA | ||
table · not-accessible · current This table lists the attributes of all RS interfaces. | ||||
| RhwRsEntry | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1 | NA | ||
| ChwRsIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The value of this object identifies the index of a serial interface on a device. | ||||
| ChwRsPortMode | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the type of a serial interface. The value can be rs-232,rs-485,rs-422,,v.24,x.21 or v.35. For NED1MPAA/CR23MPAA PICs: Ports 0 and 2 work in rs-232 mode. The working mode cannot be configured. Ports 1 and 3 can work either in rs-485 or rs-422 mode. The default mode is rs-422. For NED1SA8/CR23SA8 PICs, all ports can work in v-35, x-21, or v-24 mode. The default mode is v-24.
| ||||
| ChwRsWorkMode | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the mode in which a serial interface works. The value can be dce or dte. The default value is dce.
| ||||
| ChwRsPhysicalMode | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the mode in which a serial interface transmits signals. The value can be async or sync. The default value is async.
| ||||
| ChwRsClockSource | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the clock source mode of a serial interface. The value can be internal,external or slave. The default value is internal.
| ||||
| ChwRsBaudrate | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.6 | Integer32 (0..38) | RW | |
column · Integer32 (0..38) · read-write · current This object indicates the baud rate of a serial interface. The value can be : 0: 600bit/s, 1: 1200bit/s, 2: 2400bit/s, 3: 4800bit/s, 4: 9600bit/s, 5: 19200bit/s, 6: 38400bit/s, 7: 48000bit/s, 8~38: N*64Kbit/s N<=31. The default value is 9600 bit/s in asynchronous transfer mode and 64 kbit/s in synchronous transfer mode. | ||||
| ChwRsClockSendMode | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the mode in which clock signals transmitted by a serial interface are sampled. This mode can be configured in synchronous clock mode. The value can be inphase or inversephase. The default value is inversephase.
| ||||
| ChwRsClockReceiveMode | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the mode in which clock signals received by a serial interface are sampled. This mode can be configured in synchronous clock mode. The value can be inphase or inversephase. The default value is inphase.
| ||||
| ChwRsParity | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the parity check mode of a serial interface's asynchronous frames. This mode can be configured in asynchronous clock mode. The value can be none,even or odd. The default value is none.
| ||||
| ChwRsStopbits | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the number of stop bits contained in a serial interface's asynchronous frame. This object can be configured in asynchronous clock mode. The value can be 1-bits or 2-bits. The default value is 1-bits.
| ||||
| ChwRsDatabits | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.11 | Integer32 (5..8 | 255) | RW | |
column · Integer32 (5..8 | 255) · read-write · current This object indicates the number of data bits contained in a serial interface's asynchronous frame. This object can be configured in asynchronous clock mode. The value ranges from 5 to 8 bits.The default value is 8 bits. The value 255 indicates that the interface does not support this function. | ||||
| ChwRsMuxProtocol | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the type of a serial interface's sub-rate multiplexing protocol. This object can be configured in asynchronous clock mode. The value can be sbit-loop,sbit=0 or sbit=1. The default value is sbit-loop.
| ||||
| ChwRsX50PhaseMode | 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the envelope phase mode multiplexed by a serial interface's x.50 sub-rate. The value can be sequence or interval. The default value is sequence.
| ||||
| ThwGlobalCfgTable | 1.3.6.1.4.1.2011.5.25.157.1.23.4 | NA | ||
table · not-accessible · current This table lists the global physical attributes of all narrowband interfaces. | ||||
| RhwGlobalCfgEntry | 1.3.6.1.4.1.2011.5.25.157.1.23.4.1 | NA | ||
row · not-accessible · current This table lists the global physical attributes of all narrowband interfaces.
| ||||
| ChwNarrowBandCardId | 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The value of this object identifies the ID of a narrowband card on a device. | ||||
| ChwSignalMode | 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the global signal mode of the physical serial interface. By default, the signal mode is bell5. This object indicates the global signaling mode of an E&M interface. The value can be Bell-1,Bell-2,Bell-3,Bell-4 or Bell-5. The default value is Bell-5.
| ||||
| ChwUserLine | 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the global user line mode of an E&M interface. The value can be 2-wire or 4-wire. The default value is 4-wire.
| ||||
| ThwNbCommonTable | 1.3.6.1.4.1.2011.5.25.157.1.23.5 | NA | ||
table · not-accessible · current This table lists the common attributes of all narrowband interfaces. | ||||
| RhwNbCommonEntry | 1.3.6.1.4.1.2011.5.25.157.1.23.5.1 | NA | ||
row · not-accessible · current This table lists the common attributes of all narrowband interfaces.
| ||||
| ChwNbIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The value of this object identifies the index of an narrowband interface. | ||||
| ChwNbLoopback | 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The local loopback of an narrowband interface is used to test the interface itself. By default, stopLoopback is used.
| ||||
| ChwNbPortType | 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the type of a serial interface.
| ||||
| ChwNbAcBlock | 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the AC state of a serial interface.
| ||||
| ChwNbTimeDelayMaster | 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the delay configured for the primary link of a serial interface. | ||||
| ChwNbTimeDelaySlave | 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the delay configured for the secondary link of a serial interface. | ||||
| ChwNbRealTimeDelay | 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the real-time delay of a serial interface. | ||||
| NhwLinkHeartbeat | 1.3.6.1.4.1.2011.5.25.157.1.24 | |||
| ThwLinkHeartbeatFaultTable | 1.3.6.1.4.1.2011.5.25.157.1.24.1 | NA | ||
table · not-accessible · current Link-heartbeat alarm fault info table. The table that contains send packets interface and receive packets interface information currently operating on this device. | ||||
| RhwLinkHeartbeatFaultEntry | 1.3.6.1.4.1.2011.5.25.157.1.24.1.1 | NA | ||
| ChwLinkHeartbeatIfindex | 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The interface index. | ||||
| ChwLinkHeartbeatIfName | 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.2 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current The interface name. | ||||
| ChwLinkHeartbeatTxInterface | 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.3 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current The send physical interface name. | ||||
| ChwLinkHeartbeatRxInterface | 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.4 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current The receive physical interface name. | ||||
| NhwPortTotalStatistics | 1.3.6.1.4.1.2011.5.25.157.1.25 | |||
| ThwPortTotalStatTable | 1.3.6.1.4.1.2011.5.25.157.1.25.1 | NA | ||
table · not-accessible · current This table lists the port total statistics. | ||||
| RhwPortTotalStatEntry | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1 | NA | ||
| ChwPortTotalStatIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The index of this interface. | ||||
| ChwPortTotalStatIfName | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.2 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current The name of this interface. | ||||
| ChwPortTotalStatInPkts | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current Received total Pkts stat of this interface. | ||||
| ChwPortTotalStatInOctets | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Received total Octets stat of this interface. | ||||
| ChwPortTotalStatInErrors | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Received total error Pkts stat of this interface. | ||||
| ChwPortTotalStatOutPkts | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Send total Pkts stat of this interface. | ||||
| ChwPortTotalStatOutOctets | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Send total Octets stat of this interface. | ||||
| ChwPortTotalStatOutErrors | 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Send total error Pkts stat of this interface. | ||||
| NhwSubIfNumExceededSpecTrapObject | 1.3.6.1.4.1.2011.5.25.157.1.26 | |||
| ShwSubIfSpecNum | 1.3.6.1.4.1.2011.5.25.157.1.26.1 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The number of sub interface spec. | ||||
| NhwPortSpeedTrapObjects | 1.3.6.1.4.1.2011.5.25.157.1.27 | |||
| ShwPhysicalPortCurSpeed | 1.3.6.1.4.1.2011.5.25.157.1.27.1 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The speed of port after change. | ||||
| ShwPhysicalPortLastSpeed | 1.3.6.1.4.1.2011.5.25.157.1.27.2 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The speed of port before change. | ||||
| NhwTrunkUUHashRiskObject | 1.3.6.1.4.1.2011.5.25.157.1.28 | |||
| ShwUUHashRiskReason | 1.3.6.1.4.1.2011.5.25.157.1.28.1 | OCTET STRING (SIZE (0..256)) | AN | |
scalar · OCTET STRING (SIZE (0..256)) · accessible-for-notify · current Reason for an unknown unicast hash risk if an inter-board Eth-Trunk exists. | ||||
| NhwTunnelIfNumExceededSpecTrapObject | 1.3.6.1.4.1.2011.5.25.157.1.29 | |||
| ShwTunnelIfSpecNum | 1.3.6.1.4.1.2011.5.25.157.1.29.1 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The number of Tunnel interfaces spec. | ||||
| ShwTunnelIfCurrentNum | 1.3.6.1.4.1.2011.5.25.157.1.29.2 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The current number of Tunnel interfaces. | ||||
| NhwFlexEObjects | 1.3.6.1.4.1.2011.5.25.157.1.30 | |||
| ShwFlexEGrpInSlot | 1.3.6.1.4.1.2011.5.25.157.1.30.1 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Indicates the SlotID. | ||||
| ShwFlexEGrpInCard | 1.3.6.1.4.1.2011.5.25.157.1.30.2 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Indicates the CardID. | ||||
| ShwFlexEGrpID | 1.3.6.1.4.1.2011.5.25.157.1.30.3 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Indicates the group ID. | ||||
| ShwPhysicalInconsistentAlmType | 1.3.6.1.4.1.2011.5.25.157.1.30.4 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Indicates the type of the alarm indicating that the actual working mode of the lower layer of the port is inconsistent with the configured mode of the upper layer. | ||||
| ShwFlexEGroupIndex | 1.3.6.1.4.1.2011.5.25.157.1.30.5 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Indicates the FlexE group index. | ||||
| ShwFlexEGroupName | 1.3.6.1.4.1.2011.5.25.157.1.30.6 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current Indicates the FlexE group name. | ||||
| NhwIFMPortBurst | 1.3.6.1.4.1.2011.5.25.157.1.31 | |||
| ThwIFMPortBurstTable | 1.3.6.1.4.1.2011.5.25.157.1.31.1 | NA | ||
table · not-accessible · current This table describes the access and configuration of attributes of the port burst alarm | ||||
| RhwIFMPortBurstEntry | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1 | NA | ||
row · not-accessible · current Indicates the attribute of the port burst alarm. | ||||
| ChwIFMPortBurstIfIndex | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | ||||
| ChwIFMPortBurstIfName | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates the burst interface name. | ||||
| ChwIFMPortBurstInputPacketNum | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the burst input packet number. | ||||
| ChwIFMPortBurstInputByteNum | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the burst input byte number. | ||||
| ChwIFMPortBurstOutputPacketNum | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the burst output packet number. | ||||
| ChwIFMPortBurstOutputByteNum | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the burst output byte number. | ||||
| ChwIFMPortBurstThreshold | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current This object indecates the burst threshold. | ||||
| ChwIFMPortBurstEventTime | 1.3.6.1.4.1.2011.5.25.157.1.31.1.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Ths object indecates the burst event time. | ||||
| NhwPortNotifications | 1.3.6.1.4.1.2011.5.25.157.2 | |||
| !hwPortACRMasterPWChange | 1.3.6.1.4.1.2011.5.25.157.2.1 | |||
notification · current CES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a pw is deleted or the pw status change. | ||||
| NhwDslImaGroupTraps | 1.3.6.1.4.1.2011.5.25.157.2.2 | |||
| !hwDslImaGroupLEDown | 1.3.6.1.4.1.2011.5.25.157.2.2.1 | |||
notification · current The ima group local edge down notification. | ||||
| !hwDslImaGroupLEUp | 1.3.6.1.4.1.2011.5.25.157.2.2.2 | |||
notification · current The ima group local edge up notification. | ||||
| !hwDslImaGroupREDown | 1.3.6.1.4.1.2011.5.25.157.2.2.3 | |||
notification · current The ima group remote edge down notification. | ||||
| !hwDslImaGroupREUp | 1.3.6.1.4.1.2011.5.25.157.2.2.4 | |||
notification · current The ima group remote edge up notification. | ||||
| NhwDslImaLinkTraps | 1.3.6.1.4.1.2011.5.25.157.2.3 | |||
| !hwDslImaLinkLif | 1.3.6.1.4.1.2011.5.25.157.2.3.1 | |||
notification · current The ima link lif notification. | ||||
| !hwDslImaLinkLifResume | 1.3.6.1.4.1.2011.5.25.157.2.3.2 | |||
notification · current The ima link lif resume notification. | ||||
| !hwDslImaLinkLods | 1.3.6.1.4.1.2011.5.25.157.2.3.3 | |||
notification · current The ima link lods notification. | ||||
| !hwDslImaLinkLodsResume | 1.3.6.1.4.1.2011.5.25.157.2.3.4 | |||
notification · current The ima link lods resume notification. | ||||
| !hwDslImaLinkRfi | 1.3.6.1.4.1.2011.5.25.157.2.3.5 | |||
notification · current The ima link rfi notification. | ||||
| !hwDslImaLinkRfiResume | 1.3.6.1.4.1.2011.5.25.157.2.3.6 | |||
notification · current The ima link rfi resume notification. | ||||
| !hwDslImaLinkReTxUnusable | 1.3.6.1.4.1.2011.5.25.157.2.3.7 | |||
notification · current The ima link remote tx unusable notification. | ||||
| !hwDslImaLinkReTxUsable | 1.3.6.1.4.1.2011.5.25.157.2.3.8 | |||
notification · current The ima link remote tx usable notification. | ||||
| !hwDslImaLinkReRxUnusable | 1.3.6.1.4.1.2011.5.25.157.2.3.9 | |||
notification · current The ima link remote rx unusable notification. | ||||
| !hwDslImaLinkReRxUsable | 1.3.6.1.4.1.2011.5.25.157.2.3.10 | |||
notification · current The ima link remote tx usable notification. | ||||
| NhwDslLinkTraps | 1.3.6.1.4.1.2011.5.25.157.2.4 | |||
| !hwDslLinkFrameLost | 1.3.6.1.4.1.2011.5.25.157.2.4.1 | |||
notification · current The dsl link frame lost notification. | ||||
| !hwDslLinkFrameResume | 1.3.6.1.4.1.2011.5.25.157.2.4.2 | |||
notification · current The dsl link frame resume notification. | ||||
| !hwDslLinkSignalLost | 1.3.6.1.4.1.2011.5.25.157.2.4.3 | |||
notification · current The dsl link signal lost notification. | ||||
| !hwDslLinkSignalResume | 1.3.6.1.4.1.2011.5.25.157.2.4.4 | |||
notification · current The dsl link signal resume notification. | ||||
| !hwCesPwRemoteLosPktAlarm | 1.3.6.1.4.1.2011.5.25.157.2.5 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesPwRemoteLosPktAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.6 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwCesPwOppositeRai | 1.3.6.1.4.1.2011.5.25.157.2.7 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesPwOppositeRaiResume | 1.3.6.1.4.1.2011.5.25.157.2.8 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwLosAlarm | 1.3.6.1.4.1.2011.5.25.157.2.9 | |||
notification · current This object indicates that an alarm is generated due to signal loss at the receive end. | ||||
| !hwLosAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.10 | |||
notification · current This object indicates that a clear alarm is generated when signal loss at the receive end stops. | ||||
| !hwLofAlarm | 1.3.6.1.4.1.2011.5.25.157.2.11 | |||
notification · current This object indicates that an out of frame (OOF) alarm is generated at the receive end. | ||||
| !hwLofAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.12 | |||
notification · current This object indicates that a clear alarm is generated when frame loss at the receive end stops. | ||||
| !hwOofAlarm | 1.3.6.1.4.1.2011.5.25.157.2.13 | |||
notification · current This object indicates that an out of frame (OOF) alarm is generated at the receive end. | ||||
| !hwOofAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.14 | |||
notification · current This object indicates that the OOF alarm generated at the receive end is cleared. | ||||
| !hwB1TcaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.15 | |||
notification · current This object indicates that the number of error bits for the B1 RS exceeds a specified threshold. | ||||
| !hwB1TcaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.16 | |||
notification · current This object indicates that the number of error bits for the B1 RS falls below the specified threshold. | ||||
| !hwB2TcaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.17 | |||
notification · current This object indicates that the number of error bits for the B2 RS exceeds a specified threshold. | ||||
| !hwB2TcaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.18 | |||
notification · current This object indicates that the number of error bits for the B2 RS falls below the specified threshold. | ||||
| !hwJ0TimAlarm | 1.3.6.1.4.1.2011.5.25.157.2.19 | |||
notification · current This object indicates that an alarm for trace identifier mismatch is generated. | ||||
| !hwJ0TimAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.20 | |||
notification · current This object indicates that the alarm for trace identifier mismatch is cleared. | ||||
| !hwLrdiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.21 | |||
notification · current This object indicates that a line remote defect indicator (LRDI) alarm is generated in the multiplex section (MS) at the remote end. | ||||
| !hwLrdiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.22 | |||
notification · current This object indicates that the LRDI alarm generated in the MS at the remote end is cleared. | ||||
| !hwSfbereAlarm | 1.3.6.1.4.1.2011.5.25.157.2.23 | |||
notification · current This object indicates that the number of error bits for the B2 RS exceeds a specified threshold. | ||||
| !hwSfbereAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.24 | |||
notification · current This object indicates that the number of error bits for the B2 RS falls below the specified threshold. | ||||
| !hwAuLopAlarm | 1.3.6.1.4.1.2011.5.25.157.2.25 | |||
notification · current This object indicates the loss of the AU pointer. | ||||
| !hwAuLopAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.26 | |||
notification · current This object indicates that the alarm for the loss of the AU pointer is cleared. | ||||
| !hwLaisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.27 | |||
notification · current This object indicates the indication signal alarm in the MS. | ||||
| !hwLaisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.28 | |||
notification · current This object indicates that the indication signal alarm in the MS is cleared. | ||||
| !hwSdbereAlarm | 1.3.6.1.4.1.2011.5.25.157.2.29 | |||
notification · current This object indicates the signal degrade in the B2 MS. | ||||
| !hwSdbereAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.30 | |||
notification · current This object indicates that the alarm for the signal degrade in the B2 MS is cleared. | ||||
| !hwPtimAlarm | 1.3.6.1.4.1.2011.5.25.157.2.31 | |||
notification · current This object indicates that an alarm is generated when the higher order path (HP) trace identifier is unstable. | ||||
| !hwPtimAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.32 | |||
notification · current This object indicates that a clear alarm is generated when the higher order path (HP) trace identifier becomes stable. | ||||
| !hwPuneqAlarm | 1.3.6.1.4.1.2011.5.25.157.2.33 | |||
notification · current This object indicates that an alarm is generated when the higher order path (HP) is unequipped. | ||||
| !hwPuneqAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.34 | |||
notification · current This object indicates that a clear alarm is generated when the higher order path (HP) is equipped. | ||||
| !hwPrdiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.35 | |||
notification · current This object indicates the higher order path (HP) Remote Default Indication (HPRDI) alarm. | ||||
| !hwPrdiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.36 | |||
notification · current This object indicates that the HPRDI alarm is cleared. | ||||
| !hwB3TcaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.37 | |||
notification · current This object indicates that the number of bit errors on the B3 higher order path (HP) exceeds the upper threshold. | ||||
| !hwB3TcaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.38 | |||
notification · current This object indicates that the number of bit errors on the B3 higher order path (HP) falls below the upper threshold. | ||||
| !hwPplmAlarm | 1.3.6.1.4.1.2011.5.25.157.2.39 | |||
notification · current This object indicates the higher order path (HP) signal identifier mismatch. | ||||
| !hwPplmAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.40 | |||
notification · current This object indicates that the higher order path (HP) signal identifier mismatch is rectified. | ||||
| !hwPaisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.41 | |||
notification · current This object indicates that a path alarm indication signal is detected. | ||||
| !hwPaisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.42 | |||
notification · current This object indicates that the path alarm indication signal is removed. | ||||
| !hwAuAisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.43 | |||
notification · current This object indicates that a higher order path (HP) indication signal alarm is generated. | ||||
| !hwAuAisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.44 | |||
notification · current This object indicates that the higher order path (HP) indication signal alarm is cleared. | ||||
| !hwVlopAlarm | 1.3.6.1.4.1.2011.5.25.157.2.45 | |||
notification · current This object indicates that an alarm is generated when the administrative unit (AU) pointer is lost. | ||||
| !hwVlopAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.46 | |||
notification · current This object indicates that the alarm generated due to the loss of the AU pointer is cleared. | ||||
| !hwLomAlarm | 1.3.6.1.4.1.2011.5.25.157.2.47 | |||
notification · current This object indicates the loss of multiframe (LOM) on the higher order path (HP). | ||||
| !hwLomAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.48 | |||
notification · current This object indicates that the LOM on the higher order path (HP) is resolved. | ||||
| !hwLpTimVc12Alarm | 1.3.6.1.4.1.2011.5.25.157.2.49 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLpTimVc12AlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.50 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLpUneqVc12Alarm | 1.3.6.1.4.1.2011.5.25.157.2.51 | |||
notification · current This object indicates that a lower order path (LP) unequipped indication signal (PUNEQ) alarm is generated. | ||||
| !hwLpUneqVc12AlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.52 | |||
notification · current This object indicates that the PUNEQ alarm is cleared. | ||||
| !hwVrdiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.53 | |||
notification · current This object indicates that a lower order path (LP) remote defect indication (PRDI) alarm is generated. | ||||
| !hwVrdiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.54 | |||
notification · current This object indicates that the PRDI alarm is cleared. | ||||
| !hwBip2TcaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.57 | |||
notification · current This object indicates that an alarm is generated for the BIP signal degrade. | ||||
| !hwBip2TcaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.58 | |||
notification · current This object indicates that the alarm for the BIP signal degrade is cleared. | ||||
| !hwLpSlmVc12Alarm | 1.3.6.1.4.1.2011.5.25.157.2.59 | |||
notification · current This object indicates a lower order path (LP) signal label mismatch alarm. | ||||
| !hwLpSlmVc12AlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.60 | |||
notification · current This object indicates that the lower order path (LP) signal label mismatch alarm is cleared. | ||||
| !hwTuAisVc12Alarm | 1.3.6.1.4.1.2011.5.25.157.2.61 | |||
notification · current This object indicates TU alarm indication. | ||||
| !hwTuAisVc12AlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.62 | |||
notification · current This object indicates that the TU alarm is cleared. | ||||
| !hwE1EstcaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.63 | |||
notification · current This object indicates that the number of errored seconds exceeds a specified threshold. | ||||
| !hwE1EstcaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.64 | |||
notification · current This object indicates that the number of errored seconds falls below a specified threshold. | ||||
| !hwE1LmfaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.67 | |||
notification · current This object indicates an LOM alarm on the framed E1. | ||||
| !hwE1LmfaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.68 | |||
notification · current This object indicates that the LOM alarm on the framed E1 is cleared. | ||||
| !hwE1UpE1AisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.69 | |||
notification · current This object indicates that an upstream alarm indication signal is generated on an E1 interface. | ||||
| !hwE1UpE1AisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.70 | |||
notification · current This object indicates that the upstream alarm indication signal generated on an E1 interface is cleared. | ||||
| !hwE1AlmE1RaiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.71 | |||
notification · current This object indicates that a remote alarm indication (RAI) signal is generated on an E1 link. | ||||
| !hwE1AlmE1RaiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.72 | |||
notification · current This object indicates that the RAI signal generated on an E1 link is cleared. | ||||
| !hwCesPwOppositeAcFault | 1.3.6.1.4.1.2011.5.25.157.2.73 | |||
notification · current This object indicates that an alarm is generated when the attachment circuit on the peer device goes faulty.
| ||||
| !hwCesPwOppositeAcFaultResume | 1.3.6.1.4.1.2011.5.25.157.2.74 | |||
notification · current This object indicates that a clear alarm is generated when the attachment circuit fault on the peer device is rectified.
| ||||
| !hwCesLosPktExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.75 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesLosPktExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.76 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwCesMisorderPktExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.77 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesMisorderPktExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.78 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwCesStrayPktExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.79 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesStrayPktExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.80 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwCesMalPktExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.81 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesMalPktExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.82 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwCesJtrUdrExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.83 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesJtrUdrExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.84 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwCesJtrOvrExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.85 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesJtrOvrExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.86 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwRroolAlarm | 1.3.6.1.4.1.2011.5.25.157.2.87 | |||
notification · current This object indicates that an alarm is generated when there is no clock on the receive line. | ||||
| !hwRroolAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.88 | |||
notification · current This object indicates that a clear alarm is generated when there is a clock on the receive line. | ||||
| !hwVrfiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.89 | |||
notification · current This object indicates that an alarm is generated when a lower order path (LP) remote failure indication (RFI) signal is detected. | ||||
| !hwVrfiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.90 | |||
notification · current This object indicates that a clear alarm is generated when the lower order path (LP) remote failure indication (RFI) signal is cleared. | ||||
| !hwV5VcaisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.91 | |||
notification · current This object indicates that an alarm indication signal is generated in the virtual container. | ||||
| !hwV5VcaisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.92 | |||
notification · current This object indicates that the alarm indication signal generated in the virtual container is cleared. | ||||
| !hwCposE1AlmE1RaiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.95 | |||
notification · current This object indicates that an RAI signal is generated on an E1 link channelized from VC12. | ||||
| !hwCposE1AlmE1RaiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.96 | |||
notification · current This object indicates that the RAI signal generated on an E1 link channelized from VC12 is cleared. | ||||
| !hwCposE1LfaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.97 | |||
notification · current This object indicates that an out of frame (OOF) alarm is generated on the framed E1 channelized from VC12. | ||||
| !hwCposE1LfaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.98 | |||
notification · current This object indicates that the OOF alarm generated on the framed E1 channelized from VC12 is cleared. | ||||
| !hwCposE1UpE1AisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.99 | |||
notification · current This object indicates that an upstream alarm indication signal is generated on an E1 link channelized from VC12. | ||||
| !hwCposE1UpE1AisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.100 | |||
notification · current This object indicates that an upstream alarm indication signal generated on an E1 link channelized from VC12 is cleared. | ||||
| !hwCposE1DownE1AisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.101 | |||
notification · current This object indicates that a downstream alarm indication signal is generated on an E1 link channelized from VC12. | ||||
| !hwCposE1DownE1AisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.102 | |||
notification · current This object indicates that the downstream alarm indication signal generated on an E1 link channelized from VC12 is cleared. | ||||
| !hwE1DownE1AisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.103 | |||
notification · current This object indicates that a downstream alarm indication signal is generated on an E1 interface. | ||||
| !hwE1DownE1AisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.104 | |||
notification · current This object indicates that the downstream alarm indication signal generated on an E1 interface is cleared. | ||||
| !hwCposE1LmfaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.111 | |||
notification · current This object indicates that an out of multiframe (OOM) alarm is generated on the framed E1 channelized from VC12. | ||||
| !hwCposE1LmfaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.112 | |||
notification · current This object indicates that the OOM alarm generated on the framed E1 channelized from VC12 is cleared. | ||||
| !hwLaserShutAlarm | 1.3.6.1.4.1.2011.5.25.157.2.113 | |||
notification · current This object indicates that an alarm is generated when the optical laser on a board is shut down. | ||||
| !hwLaserShutAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.114 | |||
notification · current This object indicates that a clear alarm is generated when the optical laser on a board is opened. | ||||
| !hwLaserAutoShutAlarm | 1.3.6.1.4.1.2011.5.25.157.2.115 | |||
notification · current This object indicates that an alarm is generated when the optical laser is shut down automatically. | ||||
| !hwLaserAutoShutAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.116 | |||
notification · current This object indicates that the alarm for the automatic shutdown of the optical laser is cleared. | ||||
| !hwLoopbackAlarm | 1.3.6.1.4.1.2011.5.25.157.2.117 | |||
notification · current This object indicates that an alarm is generated due to an interface loopback. | ||||
| !hwLoopbackAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.118 | |||
notification · current This object indicates that the alarm for the interface loopback is cleared. | ||||
| !hwOcdAlarm | 1.3.6.1.4.1.2011.5.25.157.2.119 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwOcdAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.120 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLcdAlarm | 1.3.6.1.4.1.2011.5.25.157.2.121 | |||
notification · current This object indicates an alarm for the loss of synchronization codes (SCs). | ||||
| !hwLcdAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.122 | |||
notification · current This object indicates that the alarm for the loss of synchronization codes (SCs) is cleared. | ||||
| !hwUhcsAlarm | 1.3.6.1.4.1.2011.5.25.157.2.123 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwUhcsAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.124 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwChcsAlarm | 1.3.6.1.4.1.2011.5.25.157.2.125 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwChcsAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.126 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwChannelLoopbackAlarm | 1.3.6.1.4.1.2011.5.25.157.2.127 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwChannelLoopbackAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.128 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwCesLopsAlarm | 1.3.6.1.4.1.2011.5.25.157.2.129 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwCesLopsAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.130 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwAtmPwLosPktExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.131 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwAtmPwLosPktExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.132 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwAtmPwMisorderPktExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.133 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwAtmPwMisorderPktExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.134 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwAtmPwUnknownCellExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.135 | |||
notification · current Indicates the alarm is detected.
| ||||
| !hwAtmPwUnknownCellExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.136 | |||
notification · current Indicates the alarm is cleared.
| ||||
| !hwInputErrorAlarm | 1.3.6.1.4.1.2011.5.25.157.2.153 | |||
notification · current This object indicates that an alarm is generated when the number of input errors on an interface exceeds the upper threshold. | ||||
| !hwInputErrorAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.154 | |||
notification · current This object indicates that a clear alarm is generated when the number of input errors on an interface falls below the upper threshold. | ||||
| !hwOutputErrorAlarm | 1.3.6.1.4.1.2011.5.25.157.2.155 | |||
notification · current This object indicates that an alarm is generated when the number of output errors on an interface exceeds the upper threshold. | ||||
| !hwOutputErrorAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.156 | |||
notification · current This object indicates that a clear alarm is generated when the number of output errors on an interface falls below the upper threshold. | ||||
| NhwPortAlarmTraps | 1.3.6.1.4.1.2011.5.25.157.2.157 | |||
| !hwPhysicalPortCrcError | 1.3.6.1.4.1.2011.5.25.157.2.157.1 | |||
notification · current Port Crc error alarm notification. | ||||
| !hwPhysicalPortCrcErrorResume | 1.3.6.1.4.1.2011.5.25.157.2.157.2 | |||
notification · current Port Crc error alarm resume. | ||||
| !hwPhysicalPortSymbolError | 1.3.6.1.4.1.2011.5.25.157.2.157.3 | |||
notification · current This object indicates the Symbol error alarm. | ||||
| !hwPhysicalPortSymbolErrorResume | 1.3.6.1.4.1.2011.5.25.157.2.157.4 | |||
notification · current This object indicates that the Symbol error alarm is cleared. | ||||
| !hwPhysicalPortSdhError | 1.3.6.1.4.1.2011.5.25.157.2.157.5 | |||
notification · current This object indicates the Input error alarm. | ||||
| !hwPhysicalPortSdhErrorResume | 1.3.6.1.4.1.2011.5.25.157.2.157.6 | |||
notification · current This object indicates that the Input error alarm is cleared. | ||||
| !hwPhysicalPortBip8SdError | 1.3.6.1.4.1.2011.5.25.157.2.157.7 | |||
notification · current This object indicates the Output error alarm. | ||||
| !hwPhysicalPortBip8SdErrorResume | 1.3.6.1.4.1.2011.5.25.157.2.157.8 | |||
notification · current This object indicates that the Output error alarm is cleared. | ||||
| !hwPhysicalPortCrcPacketErrorRatio | 1.3.6.1.4.1.2011.5.25.157.2.157.9 | |||
notification · current This object indicates that an alarm is generated when the number of CRC errors on a physical interface exceeds the upper threshold. The host sends a trap message to the NMS. | ||||
| !hwPhysicalPortCrcPacketErrorRatioResume | 1.3.6.1.4.1.2011.5.25.157.2.157.10 | |||
notification · current This object indicates that a clear alarm is generated when the number of CRC errors on a physical interface falls below the upper threshold. The host sends a trap message to the NMS. | ||||
| !hwPhysicalPortCrcSd | 1.3.6.1.4.1.2011.5.25.157.2.157.11 | |||
notification · current Port MAC_FCS_SD alarm notification. | ||||
| !hwPhysicalPortCrcSdResume | 1.3.6.1.4.1.2011.5.25.157.2.157.12 | |||
notification · current Port MAC_FCS_SD alarm resume. | ||||
| !hwPhysicalPortCrcExc | 1.3.6.1.4.1.2011.5.25.157.2.157.13 | |||
notification · current Port MAC_FCS_EXC alarm notification. | ||||
| !hwPhysicalPortCrcExcResume | 1.3.6.1.4.1.2011.5.25.157.2.157.14 | |||
notification · current Port MAC_FCS_EXC alarm resume notification. | ||||
| !hwPhysicalPortCrcPerWarning | 1.3.6.1.4.1.2011.5.25.157.2.157.15 | |||
notification · current Port CRC-PER(Packet Error Ratio) warning notification. | ||||
| !hwPhysicalPortCrcPerWarningResume | 1.3.6.1.4.1.2011.5.25.157.2.157.16 | |||
notification · current Port CRC-PER(Packet Error Ratio) warning resume notification. | ||||
| NhwPhysicalPortFlowSurge | 1.3.6.1.4.1.2011.5.25.157.2.157.17 | |||
| !hwInputBroadcastSurgeOccur | 1.3.6.1.4.1.2011.5.25.157.2.157.17.1 | |||
notification · current Input broadcast surge occurred. | ||||
| !hwInputBroadcastSurgeResume | 1.3.6.1.4.1.2011.5.25.157.2.157.17.2 | |||
notification · current Input broadcast surge resumed. | ||||
| !hwOutputBroadcastSurgeOccur | 1.3.6.1.4.1.2011.5.25.157.2.157.17.3 | |||
notification · current Output broadcast surge occurred. | ||||
| !hwOutputBroadcastSurgeResume | 1.3.6.1.4.1.2011.5.25.157.2.157.17.4 | |||
notification · current Output broadcast surge resumed. | ||||
| !hwPortCrcRateExceed | 1.3.6.1.4.1.2011.5.25.157.2.157.18 | |||
notification · current Indicates that the rate of the incoming traffic packets with CRC error exceeds the alarm threshold. | ||||
| !hwPortErrorRateExceed | 1.3.6.1.4.1.2011.5.25.157.2.157.19 | |||
notification · current Indicates that the rate of the incoming traffic error packets exceeds the alarm threshold. | ||||
| !hwPhysicalPortInBroadcastRapidChange | 1.3.6.1.4.1.2011.5.25.157.2.157.20 | |||
notification · current Indicates that the rate of the input broadcast exceeds the threshold. | ||||
| !hwPhysicalPortCrcRatioExceed | 1.3.6.1.4.1.2011.5.25.157.2.157.21 | |||
notification · current Indicates that the ratio of CRC packets exceeds the alarm threshold. | ||||
| !hwPhysicalPortCrcRatioResume | 1.3.6.1.4.1.2011.5.25.157.2.157.22 | |||
notification · current Indicates that the ratio of CRC packets falls below the alarm threshold. | ||||
| !hwLoopBackAutoClearNotice | 1.3.6.1.4.1.2011.5.25.157.2.160 | |||
notification · current set port undo loopback while set loopback autoclear enable when time out. | ||||
| !hwChannelLoopBackAutoClearNotice | 1.3.6.1.4.1.2011.5.25.157.2.161 | |||
notification · current set channel undo loopback while set loopback autoclear enable when time out. | ||||
| !hwHpJ1TiuAlarm | 1.3.6.1.4.1.2011.5.25.157.2.162 | |||
notification · current This object indicates that an alarm is generated when the higher order path (HP) trace identifier is unstable. | ||||
| !hwHpJ1TiuAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.163 | |||
notification · current This object indicates that a clear alarm is generated when the higher order path (HP) trace identifier becomes stable. | ||||
| !hwPortAlarmInverseAutoRecover | 1.3.6.1.4.1.2011.5.25.157.2.164 | |||
| !hwB1ExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.165 | |||
notification · current This object indicates that an alarm is generated when the number of B1 errors exceeds a specified threshold. | ||||
| !hwB1ExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.166 | |||
notification · current This object indicates that a clear alarm is generated when the number of B1 errors falls below a specified threshold. | ||||
| !hwB3ExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.167 | |||
notification · current This object indicates that an alarm is generated when the number of B3 errors exceeds a specified threshold. | ||||
| !hwB3ExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.168 | |||
notification · current This object indicates that a clear alarm is generated when the number of B3 errors falls below a specified threshold. | ||||
| !hwBip2ExcAlarm | 1.3.6.1.4.1.2011.5.25.157.2.169 | |||
notification · current This object indicates that an alarm is generated when the number of BIP2 errors exceeds a specified threshold. | ||||
| !hwBip2ExcAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.170 | |||
notification · current This object indicates that a clear alarm is generated when the number of BIP2 errors falls below a specified threshold. | ||||
| !hwLicenseLimitAlarm | 1.3.6.1.4.1.2011.5.25.157.2.171 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLicenseLimitAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.172 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwOpticalModuleIsNotAuthorized | 1.3.6.1.4.1.2011.5.25.157.2.173 | |||
notification · current This object indicates that an alarm is generated when the inserted optical module is one not authenticated by Huawei. | ||||
| !hwOpticalModuleIsNotAuthorizedResume | 1.3.6.1.4.1.2011.5.25.157.2.174 | |||
notification · current This object indicates that a clear alarm is generated when the non-Huawei-authenticated optical module is removed. | ||||
| !hwLocalFaultAlarm | 1.3.6.1.4.1.2011.5.25.157.2.175 | |||
notification · current This object indicates that an alarm is generated when the receive link from the remote device to the local device fails. | ||||
| !hwLocalFaultAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.176 | |||
notification · current This object indicates that a clear alarm is generated when the receive link from the remote device to the local device recovers. | ||||
| !hwRemoteFaultAlarm | 1.3.6.1.4.1.2011.5.25.157.2.177 | |||
notification · current This object indicates that an alarm is generated when the transmit link from the remote device to the local device fails. | ||||
| !hwRemoteFaultAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.178 | |||
notification · current This object indicates that a clear alarm is generated when the transmit link from the remote device to the local device recovers. | ||||
| !hwCopperPolarityError | 1.3.6.1.4.1.2011.5.25.157.2.179 | |||
notification · current This object indicates that an alarm is generated when a polarity error occurs on an electrical interface. | ||||
| !hwCopperPolarityErrorResume | 1.3.6.1.4.1.2011.5.25.157.2.180 | |||
notification · current This object indicates that a clear alarm is generated when the polarity error on an electrical interface is cleared. | ||||
| !hwLotuaisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.181 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLotuaisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.182 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLotulomAlarm | 1.3.6.1.4.1.2011.5.25.157.2.183 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLotulomAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.184 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLotusdberAlarm | 1.3.6.1.4.1.2011.5.25.157.2.185 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLotusdberAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.186 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLotusfberAlarm | 1.3.6.1.4.1.2011.5.25.157.2.187 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLotusfberAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.188 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLoduaisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.189 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLoduaisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.190 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLodulckAlarm | 1.3.6.1.4.1.2011.5.25.157.2.191 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLodulckAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.192 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLoduociAlarm | 1.3.6.1.4.1.2011.5.25.157.2.193 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLoduociAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.194 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLpmbdiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.195 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLpmbdiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.196 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLpmtimAlarm | 1.3.6.1.4.1.2011.5.25.157.2.197 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLpmtimAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.198 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLsmbdiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.199 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLsmbdiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.200 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLsmiaeAlarm | 1.3.6.1.4.1.2011.5.25.157.2.201 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLsmiaeAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.202 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwLsmtimAlarm | 1.3.6.1.4.1.2011.5.25.157.2.203 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwLsmtimAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.204 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwNegotiationFailedAlarm | 1.3.6.1.4.1.2011.5.25.157.2.205 | |||
notification · current Auto-negotiation failure alarm. Possible causes, including the local auto-negotiation configuration with the peer inconsistencies; the local ability is not compatible with the peer; the physical connection of the two sides is unstable. When the alarm occurs, the port can't be up. | ||||
| !hwNegotiationFailedAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.206 | |||
notification · current Auto-negotiation failure alarm resume. | ||||
| !hwEthHalfDuplex | 1.3.6.1.4.1.2011.5.25.157.2.207 | |||
notification · current The port works in the half-duplex mode. | ||||
| !hwEthFullDuplex | 1.3.6.1.4.1.2011.5.25.157.2.208 | |||
notification · current The half-duplex mode alarm resume. | ||||
| !hwPhysicalPortAutoDetectFail | 1.3.6.1.4.1.2011.5.25.157.2.209 | |||
notification · current Interface auto adapter fail alarm notification. | ||||
| !hwPhysicalPortAutoDetectSuccess | 1.3.6.1.4.1.2011.5.25.157.2.210 | |||
notification · current Interface auto adapter fail alarm resume notification. | ||||
| !hwNotSameBoardInTrunk | 1.3.6.1.4.1.2011.5.25.157.2.211 | |||
| NhwOtnAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212 | |||
| !hwOtuLomAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.1 | |||
notification · current This object indicates the OTU indication signal alarm. | ||||
| !hwOtuLomAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.2 | |||
notification · current This object indicates that the OTU indication signal alarm is cleared. | ||||
| !hwOtuAisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.3 | |||
notification · current This object indicates the OTU indication signal alarm. | ||||
| !hwOtuAisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.4 | |||
notification · current This object indicates that the OTU indication signal alarm is cleared. | ||||
| !hwOtuSdAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.5 | |||
notification · current This object indicates that an alarm is generated for the OTU signal degrade. | ||||
| !hwOtuSdAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.6 | |||
notification · current This object indicates that the alarm for the OTU signal degrade is cleared. | ||||
| !hwOtuSfAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.7 | |||
notification · current This object indicates that an alarm is generated for the OTU signal failure. | ||||
| !hwOtuSfAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.8 | |||
notification · current This object indicates that the alarm for the OTU signal degrade is cleared. | ||||
| !hwSmBdiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.9 | |||
notification · current This object indicates that the backward defect indication (BDI) alarm is generated. | ||||
| !hwSmBdiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.10 | |||
notification · current This object indicates that the backward defect indication (BDI) alarm is cleared. | ||||
| !hwSmIaeAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.11 | |||
notification · current This object indicates that an alarm is generated when the ODU frame alignment between the local and remote ends is incorrect. | ||||
| !hwSmIaeAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.12 | |||
notification · current This object indicates that a clear alarm is generated when the ODU frame alignment error between the local and remote ends is corrected. | ||||
| !hwSmTimAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.13 | |||
notification · current This object indicates that an alarm is generated when TIM trace identifiers between the local and remote ends mismatch. | ||||
| !hwSmTimAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.14 | |||
notification · current This object indicates that a clear alarm is generated when TIM trace identifiers between the local and remote ends match. | ||||
| !hwOduAisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.15 | |||
notification · current This object indicates the ODU indication signal alarm. | ||||
| !hwOduAisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.16 | |||
notification · current This object indicates that the ODU indication signal alarm is cleared. | ||||
| !hwOduLokAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.17 | |||
notification · current This object indicates the ODU lock defect alarm. | ||||
| !hwOduLokAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.18 | |||
notification · current This object indicates that the ODU lock defect alarm is cleared. | ||||
| !hwOduOciAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.19 | |||
notification · current This object indicates that the indication defect alarm for the ODU open connection. | ||||
| !hwOduOciAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.20 | |||
notification · current This object indicates that the indication defect alarm for the ODU open connection is cleared. | ||||
| !hwPmBdiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.21 | |||
notification · current This object indicates that the backward defect indication (BDI) alarm is generated. | ||||
| !hwPmBdiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.22 | |||
notification · current This object indicates that the backward defect indication (BDI) alarm is cleared. | ||||
| !hwPmTimAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.23 | |||
notification · current This object indicates that an alarm is generated when path trace identifiers between the local and remote ends mismatch. | ||||
| !hwPmTimAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.24 | |||
notification · current This object indicates that a clear alarm is generated when path trace identifiers between the local and remote ends match. | ||||
| !hwPrefecTcaAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.25 | |||
notification · current This object indicates that an alarm is generated for forward error correction (FEC) bit errors. | ||||
| !hwPrefecTcaAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.26 | |||
notification · current This object indicates that a clear alarm is generated when forward error correction (FEC) bit errors are removed. | ||||
| !hwOduSdAlarm | 1.3.6.1.4.1.2011.5.25.157.2.212.27 | |||
notification · current This object indicates that an alarm is generated for the ODU signal degrade. | ||||
| !hwOduSdAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.212.28 | |||
notification · current This object indicates that the alarm for the ODU signal degrade is cleared. | ||||
| !hwE3UpE3AisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.213 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwE3UpE3AisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.214 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwE3AlmE3RaiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.215 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwE3AlmE3RaiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.216 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwMultiServiceOnOneCardAlarm | 1.3.6.1.4.1.2011.5.25.157.2.217 | |||
notification · current Multiple services be configured on the same subcard. | ||||
| !hwMultiServiceOnOneCardAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.218 | |||
notification · current There is no multiple services on the same subcard. | ||||
| !hwInputRateChangeOverThresholdNotice | 1.3.6.1.4.1.2011.5.25.157.2.219 | |||
notification · current The input rate change ratio exceeded the threshold. | ||||
| !hwOutputRateChangeOverThresholdNotice | 1.3.6.1.4.1.2011.5.25.157.2.220 | |||
notification · current The output rate change ratio exceeded the threshold. | ||||
| NhwNarrowBandTraps | 1.3.6.1.4.1.2011.5.25.157.2.221 | |||
| !hwX50LofAlarm | 1.3.6.1.4.1.2011.5.25.157.2.221.1 | |||
notification · current X.50 sub-rate out of frame occurred. | ||||
| !hwX50LofAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.221.2 | |||
notification · current X.50 sub-rate out of frame was cleared. | ||||
| !hwX50AbitAlarm | 1.3.6.1.4.1.2011.5.25.157.2.221.3 | |||
notification · current X.50 deframing failed on the remote device. | ||||
| !hwX50AbitAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.221.4 | |||
notification · current The X.50 deframing failure was cleared on the remote device. | ||||
| !hwLinkHeartbeatDropAlarm | 1.3.6.1.4.1.2011.5.25.157.2.222 | |||
notification · current Link-heartbeat drop alarm. | ||||
| !hwLinkHeartbeatDropAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.223 | |||
notification · current Link-heartbeat drop alarm resume. | ||||
| !hwLinkHeartbeatChangeAlarm | 1.3.6.1.4.1.2011.5.25.157.2.224 | |||
notification · current Link-heartbeat change alarm. | ||||
| !hwLinkHeartbeatChangeAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.225 | |||
notification · current Link-heartbeat change alarm resume. | ||||
| !hwPortPhysicalRateDegradeAlarm | 1.3.6.1.4.1.2011.5.25.157.2.226 | |||
notification · current This object indicates that an alarm is generated when the negotiation rate on an electrical interface falls sharply. | ||||
| !hwPortPhysicalRateDegradeAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.227 | |||
notification · current This object indicates that a clear alarm is generated when the negotiation rate on an electrical interface stops falling sharply. | ||||
| !hwLicenseInactiveAlarm | 1.3.6.1.4.1.2011.5.25.157.2.228 | |||
notification · current The interface license was not activated. | ||||
| !hwLicenseInactiveAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.229 | |||
notification · current The interface license inactivation alarm was cleared. | ||||
| !hwLicenseResourceLackAlarm | 1.3.6.1.4.1.2011.5.25.157.2.230 | |||
notification · current Interfaces of this type in use exceeded the maximum number.
| ||||
| !hwLicenseResourceLackAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.231 | |||
notification · current The maximum number-crossing alarm was cleared.
| ||||
| !hwPortModeChangeTrap | 1.3.6.1.4.1.2011.5.25.157.2.232 | |||
notification · current This object indicates that the port rate type is changed. | ||||
| !hwRdiAlarm | 1.3.6.1.4.1.2011.5.25.157.2.233 | |||
| !hwRdiAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.234 | |||
notification · current The peer end recovered from faults. | ||||
| !hwAisAlarm | 1.3.6.1.4.1.2011.5.25.157.2.235 | |||
notification · current Upstream signals were abnormal. | ||||
| !hwAisAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.236 | |||
| !hwCollisionAlarm | 1.3.6.1.4.1.2011.5.25.157.2.237 | |||
notification · current The link encountered a collision. | ||||
| !hwCollisionAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.238 | |||
notification · current The link recovered from a collision. | ||||
| !hwSubIfNumExceededSpecAlarm | 1.3.6.1.4.1.2011.5.25.157.2.239 | |||
| !hwSubIfNumExceededSpecAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.240 | |||
| !hwPortSpeedChangeTrap | 1.3.6.1.4.1.2011.5.25.157.2.241 | |||
notification · current The speed of port is changed. | ||||
| !hwPortGroupTransModeDiff | 1.3.6.1.4.1.2011.5.25.157.2.242 | |||
notification · current This group of interfaces do not work in the same transmission mode. | ||||
| !hwPortGroupTransModeDiffResume | 1.3.6.1.4.1.2011.5.25.157.2.243 | |||
notification · current This group of interfaces work in the same transmission mode now. | ||||
| !hwImpedanceMismatch | 1.3.6.1.4.1.2011.5.25.157.2.244 | |||
notification · current The configured interface impedance value did not match that of the cable. | ||||
| !hwPicLcdAlarm | 1.3.6.1.4.1.2011.5.25.157.2.245 | |||
notification · current Loss of code group synchronization alarm is detected. | ||||
| !hwPicLcdAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.246 | |||
notification · current Loss of code group synchronization alarm is cleared. | ||||
| !hwBoardNotSupportAssignTrunk | 1.3.6.1.4.1.2011.5.25.157.2.247 | |||
notification · current The card does not support extensions of Eth-Trunk specifications.
| ||||
| !hwPortProtectGroupUnavailable | 1.3.6.1.4.1.2011.5.25.157.2.248 | |||
| !hwPortProtectGroupAvailable | 1.3.6.1.4.1.2011.5.25.157.2.249 | |||
| !hwPortProtectGroupDelete | 1.3.6.1.4.1.2011.5.25.157.2.250 | |||
| !hwDelayOverConfig | 1.3.6.1.4.1.2011.5.25.157.2.251 | |||
notification · current Real-time E2E Delay Exceeded the Configured Delay. | ||||
| !hwDelayOverConfigResume | 1.3.6.1.4.1.2011.5.25.157.2.252 | |||
notification · current Alarm Indicating the Real-time E2E Delay Exceeded the Configured Delay Was Cleared. | ||||
| !hwAcBlockAlarm | 1.3.6.1.4.1.2011.5.25.157.2.253 | |||
notification · current AC interface blocking alarm. | ||||
| !hwAcBlockAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.254 | |||
notification · current AC interface blocking alarm clearing. | ||||
| !hwPortLicenseActFail | 1.3.6.1.4.1.2011.5.25.157.2.255 | |||
notification · current This object indicates that the license for a physical interface fails to be activated. | ||||
| !hwPortLicenseActSuccess | 1.3.6.1.4.1.2011.5.25.157.2.256 | |||
notification · current This object indicates that the license for a physical interface is successfully activated. | ||||
| !hwCableSnrAbnormal | 1.3.6.1.4.1.2011.5.25.157.2.257 | |||
notification · current The network cable is of poor quality. | ||||
| !hwCableSnrNormal | 1.3.6.1.4.1.2011.5.25.157.2.258 | |||
notification · current The network cable is of good quality. | ||||
| !hwCableSnrDetectNotSupport | 1.3.6.1.4.1.2011.5.25.157.2.259 | |||
notification · current The network cable quality cannot be detected. | ||||
| !hwFlexEPhyNumberMismatch | 1.3.6.1.4.1.2011.5.25.157.2.260 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEPhyNumberMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.261 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexEPhyGroupMismatch | 1.3.6.1.4.1.2011.5.25.157.2.262 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEPhyGroupMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.263 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexEClientIDMismatch | 1.3.6.1.4.1.2011.5.25.157.2.264 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEClientIDMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.265 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexEBwReduceAlarm | 1.3.6.1.4.1.2011.5.25.157.2.266 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEBwReduceAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.267 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexEPhyFcsSdAlarm | 1.3.6.1.4.1.2011.5.25.157.2.268 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEPhyFcsSdAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.269 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexEPhyLocalFaultAlarm | 1.3.6.1.4.1.2011.5.25.157.2.270 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEPhyLocalFaultAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.271 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexEPhyRemoteFaultAlarm | 1.3.6.1.4.1.2011.5.25.157.2.272 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEPhyRemoteFaultAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.273 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexEBwMismatch | 1.3.6.1.4.1.2011.5.25.157.2.274 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEBwMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.275 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexEPhyDelayOverAlarm | 1.3.6.1.4.1.2011.5.25.157.2.276 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexEPhyDelayOverAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.277 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwFlexESubTimeSlotMismatch | 1.3.6.1.4.1.2011.5.25.157.2.278 | |||
notification · current Indicates the alarm is detected. | ||||
| !hwFlexESubTimeSlotMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.279 | |||
notification · current Indicates the alarm is cleared. | ||||
| !hwVxlanTrunkHashNotSupport | 1.3.6.1.4.1.2011.5.25.157.2.280 | |||
notification · current The Eth-Trunk can not function normally as an outbound interface for vxlan packets when IP address-based load balancing is configured. | ||||
| !hwPvcNumAlarm | 1.3.6.1.4.1.2011.5.25.157.2.281 | |||
notification · current PVC number exceeded the upper threshold.
| ||||
| !hwPvcNumAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.282 | |||
| !hwEthoamClosePortAlarm | 1.3.6.1.4.1.2011.5.25.157.2.283 | |||
notification · current The service interface is disabled by Ethernet OAM. | ||||
| !hwPortTypeChangeTrap | 1.3.6.1.4.1.2011.5.25.157.2.284 | |||
notification · current The mode of combo port is changed. | ||||
| !hwComboSwitchFail | 1.3.6.1.4.1.2011.5.25.157.2.285 | |||
notification · current Combo switch fail alarm. | ||||
| !hwComboSwitchFailResume | 1.3.6.1.4.1.2011.5.25.157.2.286 | |||
notification · current Combo switch fail alarm resume. | ||||
| !hwEthoamClosePortAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.287 | |||
notification · current The service interface is undo disable by Ethernet OAM. | ||||
| !hwVSPortConfigFail | 1.3.6.1.4.1.2011.5.25.157.2.288 | |||
notification · current Configurations failed to be delivered to VS interconnection interfaces. | ||||
| !hwVSPortConfigFailResume | 1.3.6.1.4.1.2011.5.25.157.2.289 | |||
notification · current Configurations failed to be delivered to VS interconnection interfaces resume. | ||||
| !hwPortResourceDeadLine | 1.3.6.1.4.1.2011.5.25.157.2.290 | |||
notification · current Port authorization grace period alarm. | ||||
| !hwPortResourceDeadLineResume | 1.3.6.1.4.1.2011.5.25.157.2.291 | |||
notification · current Port authorization grace period alarm resume. | ||||
| !hwPortLRMStateAbnormal | 1.3.6.1.4.1.2011.5.25.157.2.292 | |||
notification · current Optical module of this interface does not match with LRM mode. | ||||
| !hwTrunkUUHashRisk | 1.3.6.1.4.1.2011.5.25.157.2.293 | |||
notification · current Unknown unicast hash risk if an inter-board Eth-Trunk exists.
| ||||
| !hwEthRxFlowFallAlarm | 1.3.6.1.4.1.2011.5.25.157.2.294 | |||
notification · current Traffic fall alarm in the receive direction of an Ethernet interface. | ||||
| !hwEthRxFlowFallAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.295 | |||
notification · current Traffic fall clear alarm in the receive direction of an Ethernet interface. | ||||
| !hwEthTxFlowFallAlarm | 1.3.6.1.4.1.2011.5.25.157.2.296 | |||
notification · current Traffic fall alarm in the transmit direction of an Ethernet interface. | ||||
| !hwEthTxFlowFallAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.297 | |||
notification · current Traffic fall clear alarm in the transmit direction of an Ethernet interface. | ||||
| !hwDot3brAbnormalAlarm | 1.3.6.1.4.1.2011.5.25.157.2.298 | |||
notification · current The 802.3br negotiation status is abnormal. | ||||
| !hwDot3brAbnormalAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.299 | |||
notification · current The 802.3br negotiation status is restored to normal. | ||||
| !hwInputDiscardNotice | 1.3.6.1.4.1.2011.5.25.157.2.300 | |||
notification · current Indicates that the interface input discard exceed the trap threshold. | ||||
| !hwOutputDiscardNotice | 1.3.6.1.4.1.2011.5.25.157.2.301 | |||
notification · current Indicates that the interface output discard exceed the trap threshold. | ||||
| !hwFlowControlDeadLockAlarm | 1.3.6.1.4.1.2011.5.25.157.2.303 | |||
notification · current The flowcontrol deadlock alarm has occurred. | ||||
| !hwFlowControlDeadLockAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.304 | |||
notification · current The flowcontrol deadlock alarm has resumed. | ||||
| !hwTunnelIfNumExceededSpecAlarm | 1.3.6.1.4.1.2011.5.25.157.2.305 | |||
notification · current The number of Tunnel interfaces exceeds the limit. | ||||
| !hwFlexEGrpFecModeMismatch | 1.3.6.1.4.1.2011.5.25.157.2.306 | |||
notification · current The FEC modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm.
| ||||
| !hwFlexEGrpFecModeMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.307 | |||
notification · current The FEC modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm resume.
| ||||
| !hwIfmPortBurstAlarm | 1.3.6.1.4.1.2011.5.25.157.2.308 | |||
notification · current This object indicates that a alarm is generated at the port burst. | ||||
| !hwPhysicalModeInconsistentAlarm | 1.3.6.1.4.1.2011.5.25.157.2.309 | |||
notification · current Port physical work mode inconsistent alarm. | ||||
| !hwPhysicalModeInconsistentAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.310 | |||
notification · current Port physical work mode inconsistent alarm resume. | ||||
| !hwFlexECalendarMismatch | 1.3.6.1.4.1.2011.5.25.157.2.311 | |||
notification · current Alarm of mismatch between the actually received and expected client calendars on the FlexE Group.
| ||||
| !hwFlexECalendarMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.312 | |||
notification · current The alarm of mismatch between the actually received and expected client calendars on the FlexE Group is cleared.
| ||||
| !hwFlexETimeSlotMismatch | 1.3.6.1.4.1.2011.5.25.157.2.313 | |||
notification · current Timeslot of the butted FlexE interface is mismatch. | ||||
| !hwFlexETimeSlotMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.314 | |||
notification · current Timeslot of the butted FlexE interface is mismatch resume. | ||||
| !hwFlexEGrpNegotiationFail | 1.3.6.1.4.1.2011.5.25.157.2.315 | |||
| !hwFlexEGrpNegotiationFailResume | 1.3.6.1.4.1.2011.5.25.157.2.316 | |||
notification · current FlexE group negotiation fail alarm resume.
| ||||
| !hwFlexEGrpSpeedModeMismatch | 1.3.6.1.4.1.2011.5.25.157.2.317 | |||
notification · current The speed modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm.
| ||||
| !hwFlexEGrpSpeedModeMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.318 | |||
notification · current The speed modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm resume.
| ||||
| !hwPortSfpNotSupportSingleFiber | 1.3.6.1.4.1.2011.5.25.157.2.319 | |||
notification · current Optical modules do not support single-fiber optical modules. | ||||
| !hwE1CasAlarm | 1.3.6.1.4.1.2011.5.25.157.2.320 | |||
notification · current This object indicates that the number of errored seconds exceeds a specified threshold.
| ||||
| !hwE1CasAlarmResume | 1.3.6.1.4.1.2011.5.25.157.2.321 | |||
notification · current This object indicates that the number of errored seconds falls below a specified threshold.
| ||||
| !hwFlexEGrpPaddingMismatch | 1.3.6.1.4.1.2011.5.25.157.2.322 | |||
notification · current The padding status of different PHYs in the FlexE group is inconsistent.
| ||||
| !hwFlexEGrpPaddingMismatchResume | 1.3.6.1.4.1.2011.5.25.157.2.323 | |||
notification · current The padding status of different PHYs in the FlexE group is inconsistent.
| ||||
| !hwOpticalAmplifierGainHigh | 1.3.6.1.4.1.2011.5.25.157.2.324 | |||
notification · current The gain of the optical module is too high. | ||||
| !hwOpticalAmplifierGainHighResume | 1.3.6.1.4.1.2011.5.25.157.2.325 | |||
notification · current The gain of the optical module too high has resumed. | ||||
| !hwOpticalAmplifierGainLow | 1.3.6.1.4.1.2011.5.25.157.2.326 | |||
notification · current The gain of the optical module is too low. | ||||
| !hwOpticalAmplifierGainLowResume | 1.3.6.1.4.1.2011.5.25.157.2.327 | |||
notification · current The gain of the optical module too low has resumed. | ||||
| !hwPortSfpWorkOnlyNonNego | 1.3.6.1.4.1.2011.5.25.157.2.328 | |||
notification · current When an SFP module is installed, the port can work only at 1000 Mbit/s in non-auto-negotiation mode. | ||||
| !hwPortGroupModeInvalid | 1.3.6.1.4.1.2011.5.25.157.2.329 | |||
notification · current The rate and PLL of the ports in the group do not match. | ||||
| !hwPortGroupModeInvalidResume | 1.3.6.1.4.1.2011.5.25.157.2.330 | |||
notification · current The rate and PLL of the ports in the group match now. | ||||
| !hwPortErrPktSpeedDownGrade | 1.3.6.1.4.1.2011.5.25.157.2.331 | |||
notification · current The number of error packets exceeds the threshold, triggering automatic rate reduction on the interface. | ||||
| !hwPortErrPktSpeedDownGradeResume | 1.3.6.1.4.1.2011.5.25.157.2.332 | |||
notification · current The number of error packets is lower than the threshold and the interface rate is automatically recovered. | ||||
| NhwPortConformance | 1.3.6.1.4.1.2011.5.25.157.11 | |||
| NhwPortCompliances | 1.3.6.1.4.1.2011.5.25.157.11.1 | |||
| MhwPortCompliance | 1.3.6.1.4.1.2011.5.25.157.11.1.1 | |||
compliance · current The compliance statement for systems supporting the HUAWEI-PORT-MIB.
| ||||
| NhwPortGroups | 1.3.6.1.4.1.2011.5.25.157.11.2 | |||
| GhwEthernetObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.1 | |||
group · current The Port attribute group.
| ||||
| GhwPosObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.2 | |||
group · current The Port attribute group. | ||||
| GhwCposObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.3 | |||
group · current The Port attribute group.
| ||||
| GhwDs0ChannelBundleObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.4 | |||
group · current The Port attribute group. | ||||
| GhwDs1ObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.5 | |||
group · current The Port attribute group. | ||||
| GhwDs3ObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.6 | |||
group · current The Port attribute group. | ||||
| GhwBundleSerialObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.7 | |||
group · current The Port attribute group. | ||||
| GhwPortNotificationsGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.8 | |||
group · current This is the group of port notifiction.
| ||||
| GhwDslGroupObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.9 | |||
group · current The dsl group attribute group. | ||||
| GhwDslGroupImaObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.10 | |||
group · current The dsl group ima attribute group.
| ||||
| GhwDslLinkObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.11 | |||
group · current The dsl link attribute group. | ||||
| GhwDslImaTrapGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.20 | |||
group · current The dsl Ima Trap group.
| ||||
| GhwDslLinkTrapGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.21 | |||
group · current The dsl Link Trap group. | ||||
| GhwPortAlarmThresholdObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.22 | |||
group · current The port alarm threshold group.
| ||||
| GhwPortAlarmDownEnableObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.23 | |||
group · current The port alarm down enable group. | ||||
| GhwLogicalPortObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.24 | |||
| GhwPortAlarmTrapGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.25 | |||
group · current The port alarm trap group.
| ||||
| GhwPortPhysicalObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.26 | |||
group · current The port physical object group. | ||||
| GhwPortProtectObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.27 | |||
group · current A collection of objects providing port protect group status information. | ||||
| GhwPortDescriptinonObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.28 | |||
group · current The port description object group | ||||
| GhwOtnAlarmNotificationsGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.29 | |||
group · current This is the group of OTN port notifications.
| ||||
| GhwLinkHeartbeatObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.30 | |||
group · current The link-heartbeat object group. | ||||
| GhwPortTotalStatObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.31 | |||
group · current The port total stat object group. | ||||
| GhwPortSpeedTrapObjectsGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.32 | |||
group · current The port speed change trap object group | ||||
| GhwIFMPortBurstObjectGroup | 1.3.6.1.4.1.2011.5.25.157.11.2.33 | |||
group · current The Port attribute group. | ||||
Traps / Notifications
- hwAcBlockAlarm
1.3.6.1.4.1.2011.5.25.157.2.253 - hwAcBlockAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.254 - hwAisAlarm
1.3.6.1.4.1.2011.5.25.157.2.235 - hwAisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.236 - hwAtmPwLosPktExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.131 - hwAtmPwLosPktExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.132 - hwAtmPwMisorderPktExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.133 - hwAtmPwMisorderPktExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.134 - hwAtmPwUnknownCellExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.135 - hwAtmPwUnknownCellExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.136 - hwAuAisAlarm
1.3.6.1.4.1.2011.5.25.157.2.43 - hwAuAisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.44 - hwAuLopAlarm
1.3.6.1.4.1.2011.5.25.157.2.25 - hwAuLopAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.26 - hwB1ExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.165 - hwB1ExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.166 - hwB1TcaAlarm
1.3.6.1.4.1.2011.5.25.157.2.15 - hwB1TcaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.16 - hwB2TcaAlarm
1.3.6.1.4.1.2011.5.25.157.2.17 - hwB2TcaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.18 - hwB3ExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.167 - hwB3ExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.168 - hwB3TcaAlarm
1.3.6.1.4.1.2011.5.25.157.2.37 - hwB3TcaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.38 - hwBip2ExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.169 - hwBip2ExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.170 - hwBip2TcaAlarm
1.3.6.1.4.1.2011.5.25.157.2.57 - hwBip2TcaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.58 - hwBoardNotSupportAssignTrunk
1.3.6.1.4.1.2011.5.25.157.2.247 - hwCableSnrAbnormal
1.3.6.1.4.1.2011.5.25.157.2.257 - hwCableSnrDetectNotSupport
1.3.6.1.4.1.2011.5.25.157.2.259 - hwCableSnrNormal
1.3.6.1.4.1.2011.5.25.157.2.258 - hwCesJtrOvrExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.85 - hwCesJtrOvrExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.86 - hwCesJtrUdrExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.83 - hwCesJtrUdrExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.84 - hwCesLopsAlarm
1.3.6.1.4.1.2011.5.25.157.2.129 - hwCesLopsAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.130 - hwCesLosPktExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.75 - hwCesLosPktExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.76 - hwCesMalPktExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.81 - hwCesMalPktExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.82 - hwCesMisorderPktExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.77 - hwCesMisorderPktExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.78 - hwCesPwOppositeAcFault
1.3.6.1.4.1.2011.5.25.157.2.73 - hwCesPwOppositeAcFaultResume
1.3.6.1.4.1.2011.5.25.157.2.74 - hwCesPwOppositeRai
1.3.6.1.4.1.2011.5.25.157.2.7 - hwCesPwOppositeRaiResume
1.3.6.1.4.1.2011.5.25.157.2.8 - hwCesPwRemoteLosPktAlarm
1.3.6.1.4.1.2011.5.25.157.2.5 - hwCesPwRemoteLosPktAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.6 - hwCesStrayPktExcAlarm
1.3.6.1.4.1.2011.5.25.157.2.79 - hwCesStrayPktExcAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.80 - hwChannelLoopBackAutoClearNotice
1.3.6.1.4.1.2011.5.25.157.2.161 - hwChannelLoopbackAlarm
1.3.6.1.4.1.2011.5.25.157.2.127 - hwChannelLoopbackAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.128 - hwChcsAlarm
1.3.6.1.4.1.2011.5.25.157.2.125 - hwChcsAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.126 - hwCollisionAlarm
1.3.6.1.4.1.2011.5.25.157.2.237 - hwCollisionAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.238 - hwComboSwitchFail
1.3.6.1.4.1.2011.5.25.157.2.285 - hwComboSwitchFailResume
1.3.6.1.4.1.2011.5.25.157.2.286 - hwCopperPolarityError
1.3.6.1.4.1.2011.5.25.157.2.179 - hwCopperPolarityErrorResume
1.3.6.1.4.1.2011.5.25.157.2.180 - hwCposE1AlmE1RaiAlarm
1.3.6.1.4.1.2011.5.25.157.2.95 - hwCposE1AlmE1RaiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.96 - hwCposE1DownE1AisAlarm
1.3.6.1.4.1.2011.5.25.157.2.101 - hwCposE1DownE1AisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.102 - hwCposE1LfaAlarm
1.3.6.1.4.1.2011.5.25.157.2.97 - hwCposE1LfaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.98 - hwCposE1LmfaAlarm
1.3.6.1.4.1.2011.5.25.157.2.111 - hwCposE1LmfaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.112 - hwCposE1UpE1AisAlarm
1.3.6.1.4.1.2011.5.25.157.2.99 - hwCposE1UpE1AisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.100 - hwDelayOverConfig
1.3.6.1.4.1.2011.5.25.157.2.251 - hwDelayOverConfigResume
1.3.6.1.4.1.2011.5.25.157.2.252 - hwDot3brAbnormalAlarm
1.3.6.1.4.1.2011.5.25.157.2.298 - hwDot3brAbnormalAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.299 - hwDslImaGroupLEDown
1.3.6.1.4.1.2011.5.25.157.2.2.1 - hwDslImaGroupLEUp
1.3.6.1.4.1.2011.5.25.157.2.2.2 - hwDslImaGroupREDown
1.3.6.1.4.1.2011.5.25.157.2.2.3 - hwDslImaGroupREUp
1.3.6.1.4.1.2011.5.25.157.2.2.4 - hwDslImaLinkLif
1.3.6.1.4.1.2011.5.25.157.2.3.1 - hwDslImaLinkLifResume
1.3.6.1.4.1.2011.5.25.157.2.3.2 - hwDslImaLinkLods
1.3.6.1.4.1.2011.5.25.157.2.3.3 - hwDslImaLinkLodsResume
1.3.6.1.4.1.2011.5.25.157.2.3.4 - hwDslImaLinkReRxUnusable
1.3.6.1.4.1.2011.5.25.157.2.3.9 - hwDslImaLinkReRxUsable
1.3.6.1.4.1.2011.5.25.157.2.3.10 - hwDslImaLinkReTxUnusable
1.3.6.1.4.1.2011.5.25.157.2.3.7 - hwDslImaLinkReTxUsable
1.3.6.1.4.1.2011.5.25.157.2.3.8 - hwDslImaLinkRfi
1.3.6.1.4.1.2011.5.25.157.2.3.5 - hwDslImaLinkRfiResume
1.3.6.1.4.1.2011.5.25.157.2.3.6 - hwDslLinkFrameLost
1.3.6.1.4.1.2011.5.25.157.2.4.1 - hwDslLinkFrameResume
1.3.6.1.4.1.2011.5.25.157.2.4.2 - hwDslLinkSignalLost
1.3.6.1.4.1.2011.5.25.157.2.4.3 - hwDslLinkSignalResume
1.3.6.1.4.1.2011.5.25.157.2.4.4 - hwE1AlmE1RaiAlarm
1.3.6.1.4.1.2011.5.25.157.2.71 - hwE1AlmE1RaiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.72 - hwE1CasAlarm
1.3.6.1.4.1.2011.5.25.157.2.320 - hwE1CasAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.321 - hwE1DownE1AisAlarm
1.3.6.1.4.1.2011.5.25.157.2.103 - hwE1DownE1AisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.104 - hwE1EstcaAlarm
1.3.6.1.4.1.2011.5.25.157.2.63 - hwE1EstcaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.64 - hwE1LmfaAlarm
1.3.6.1.4.1.2011.5.25.157.2.67 - hwE1LmfaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.68 - hwE1UpE1AisAlarm
1.3.6.1.4.1.2011.5.25.157.2.69 - hwE1UpE1AisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.70 - hwE3AlmE3RaiAlarm
1.3.6.1.4.1.2011.5.25.157.2.215 - hwE3AlmE3RaiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.216 - hwE3UpE3AisAlarm
1.3.6.1.4.1.2011.5.25.157.2.213 - hwE3UpE3AisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.214 - hwEthFullDuplex
1.3.6.1.4.1.2011.5.25.157.2.208 - hwEthHalfDuplex
1.3.6.1.4.1.2011.5.25.157.2.207 - hwEthRxFlowFallAlarm
1.3.6.1.4.1.2011.5.25.157.2.294 - hwEthRxFlowFallAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.295 - hwEthTxFlowFallAlarm
1.3.6.1.4.1.2011.5.25.157.2.296 - hwEthTxFlowFallAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.297 - hwEthoamClosePortAlarm
1.3.6.1.4.1.2011.5.25.157.2.283 - hwEthoamClosePortAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.287 - hwFlexEBwMismatch
1.3.6.1.4.1.2011.5.25.157.2.274 - hwFlexEBwMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.275 - hwFlexEBwReduceAlarm
1.3.6.1.4.1.2011.5.25.157.2.266 - hwFlexEBwReduceAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.267 - hwFlexECalendarMismatch
1.3.6.1.4.1.2011.5.25.157.2.311 - hwFlexECalendarMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.312 - hwFlexEClientIDMismatch
1.3.6.1.4.1.2011.5.25.157.2.264 - hwFlexEClientIDMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.265 - hwFlexEGrpFecModeMismatch
1.3.6.1.4.1.2011.5.25.157.2.306 - hwFlexEGrpFecModeMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.307 - hwFlexEGrpNegotiationFail
1.3.6.1.4.1.2011.5.25.157.2.315 - hwFlexEGrpNegotiationFailResume
1.3.6.1.4.1.2011.5.25.157.2.316 - hwFlexEGrpPaddingMismatch
1.3.6.1.4.1.2011.5.25.157.2.322 - hwFlexEGrpPaddingMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.323 - hwFlexEGrpSpeedModeMismatch
1.3.6.1.4.1.2011.5.25.157.2.317 - hwFlexEGrpSpeedModeMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.318 - hwFlexEPhyDelayOverAlarm
1.3.6.1.4.1.2011.5.25.157.2.276 - hwFlexEPhyDelayOverAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.277 - hwFlexEPhyFcsSdAlarm
1.3.6.1.4.1.2011.5.25.157.2.268 - hwFlexEPhyFcsSdAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.269 - hwFlexEPhyGroupMismatch
1.3.6.1.4.1.2011.5.25.157.2.262 - hwFlexEPhyGroupMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.263 - hwFlexEPhyLocalFaultAlarm
1.3.6.1.4.1.2011.5.25.157.2.270 - hwFlexEPhyLocalFaultAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.271 - hwFlexEPhyNumberMismatch
1.3.6.1.4.1.2011.5.25.157.2.260 - hwFlexEPhyNumberMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.261 - hwFlexEPhyRemoteFaultAlarm
1.3.6.1.4.1.2011.5.25.157.2.272 - hwFlexEPhyRemoteFaultAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.273 - hwFlexESubTimeSlotMismatch
1.3.6.1.4.1.2011.5.25.157.2.278 - hwFlexESubTimeSlotMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.279 - hwFlexETimeSlotMismatch
1.3.6.1.4.1.2011.5.25.157.2.313 - hwFlexETimeSlotMismatchResume
1.3.6.1.4.1.2011.5.25.157.2.314 - hwFlowControlDeadLockAlarm
1.3.6.1.4.1.2011.5.25.157.2.303 - hwFlowControlDeadLockAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.304 - hwHpJ1TiuAlarm
1.3.6.1.4.1.2011.5.25.157.2.162 - hwHpJ1TiuAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.163 - hwIfmPortBurstAlarm
1.3.6.1.4.1.2011.5.25.157.2.308 - hwImpedanceMismatch
1.3.6.1.4.1.2011.5.25.157.2.244 - hwInputBroadcastSurgeOccur
1.3.6.1.4.1.2011.5.25.157.2.157.17.1 - hwInputBroadcastSurgeResume
1.3.6.1.4.1.2011.5.25.157.2.157.17.2 - hwInputDiscardNotice
1.3.6.1.4.1.2011.5.25.157.2.300 - hwInputErrorAlarm
1.3.6.1.4.1.2011.5.25.157.2.153 - hwInputErrorAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.154 - hwInputRateChangeOverThresholdNotice
1.3.6.1.4.1.2011.5.25.157.2.219 - hwJ0TimAlarm
1.3.6.1.4.1.2011.5.25.157.2.19 - hwJ0TimAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.20 - hwLaisAlarm
1.3.6.1.4.1.2011.5.25.157.2.27 - hwLaisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.28 - hwLaserAutoShutAlarm
1.3.6.1.4.1.2011.5.25.157.2.115 - hwLaserAutoShutAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.116 - hwLaserShutAlarm
1.3.6.1.4.1.2011.5.25.157.2.113 - hwLaserShutAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.114 - hwLcdAlarm
1.3.6.1.4.1.2011.5.25.157.2.121 - hwLcdAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.122 - hwLicenseInactiveAlarm
1.3.6.1.4.1.2011.5.25.157.2.228 - hwLicenseInactiveAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.229 - hwLicenseLimitAlarm
1.3.6.1.4.1.2011.5.25.157.2.171 - hwLicenseLimitAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.172 - hwLicenseResourceLackAlarm
1.3.6.1.4.1.2011.5.25.157.2.230 - hwLicenseResourceLackAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.231 - hwLinkHeartbeatChangeAlarm
1.3.6.1.4.1.2011.5.25.157.2.224 - hwLinkHeartbeatChangeAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.225 - hwLinkHeartbeatDropAlarm
1.3.6.1.4.1.2011.5.25.157.2.222 - hwLinkHeartbeatDropAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.223 - hwLocalFaultAlarm
1.3.6.1.4.1.2011.5.25.157.2.175 - hwLocalFaultAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.176 - hwLoduaisAlarm
1.3.6.1.4.1.2011.5.25.157.2.189 - hwLoduaisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.190 - hwLodulckAlarm
1.3.6.1.4.1.2011.5.25.157.2.191 - hwLodulckAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.192 - hwLoduociAlarm
1.3.6.1.4.1.2011.5.25.157.2.193 - hwLoduociAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.194 - hwLofAlarm
1.3.6.1.4.1.2011.5.25.157.2.11 - hwLofAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.12 - hwLomAlarm
1.3.6.1.4.1.2011.5.25.157.2.47 - hwLomAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.48 - hwLoopBackAutoClearNotice
1.3.6.1.4.1.2011.5.25.157.2.160 - hwLoopbackAlarm
1.3.6.1.4.1.2011.5.25.157.2.117 - hwLoopbackAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.118 - hwLosAlarm
1.3.6.1.4.1.2011.5.25.157.2.9 - hwLosAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.10 - hwLotuaisAlarm
1.3.6.1.4.1.2011.5.25.157.2.181 - hwLotuaisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.182 - hwLotulomAlarm
1.3.6.1.4.1.2011.5.25.157.2.183 - hwLotulomAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.184 - hwLotusdberAlarm
1.3.6.1.4.1.2011.5.25.157.2.185 - hwLotusdberAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.186 - hwLotusfberAlarm
1.3.6.1.4.1.2011.5.25.157.2.187 - hwLotusfberAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.188 - hwLpSlmVc12Alarm
1.3.6.1.4.1.2011.5.25.157.2.59 - hwLpSlmVc12AlarmResume
1.3.6.1.4.1.2011.5.25.157.2.60 - hwLpTimVc12Alarm
1.3.6.1.4.1.2011.5.25.157.2.49 - hwLpTimVc12AlarmResume
1.3.6.1.4.1.2011.5.25.157.2.50 - hwLpUneqVc12Alarm
1.3.6.1.4.1.2011.5.25.157.2.51 - hwLpUneqVc12AlarmResume
1.3.6.1.4.1.2011.5.25.157.2.52 - hwLpmbdiAlarm
1.3.6.1.4.1.2011.5.25.157.2.195 - hwLpmbdiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.196 - hwLpmtimAlarm
1.3.6.1.4.1.2011.5.25.157.2.197 - hwLpmtimAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.198 - hwLrdiAlarm
1.3.6.1.4.1.2011.5.25.157.2.21 - hwLrdiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.22 - hwLsmbdiAlarm
1.3.6.1.4.1.2011.5.25.157.2.199 - hwLsmbdiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.200 - hwLsmiaeAlarm
1.3.6.1.4.1.2011.5.25.157.2.201 - hwLsmiaeAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.202 - hwLsmtimAlarm
1.3.6.1.4.1.2011.5.25.157.2.203 - hwLsmtimAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.204 - hwMultiServiceOnOneCardAlarm
1.3.6.1.4.1.2011.5.25.157.2.217 - hwMultiServiceOnOneCardAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.218 - hwNegotiationFailedAlarm
1.3.6.1.4.1.2011.5.25.157.2.205 - hwNegotiationFailedAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.206 - hwNotSameBoardInTrunk
1.3.6.1.4.1.2011.5.25.157.2.211 - hwOcdAlarm
1.3.6.1.4.1.2011.5.25.157.2.119 - hwOcdAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.120 - hwOduAisAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.15 - hwOduAisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.16 - hwOduLokAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.17 - hwOduLokAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.18 - hwOduOciAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.19 - hwOduOciAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.20 - hwOduSdAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.27 - hwOduSdAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.28 - hwOofAlarm
1.3.6.1.4.1.2011.5.25.157.2.13 - hwOofAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.14 - hwOpticalAmplifierGainHigh
1.3.6.1.4.1.2011.5.25.157.2.324 - hwOpticalAmplifierGainHighResume
1.3.6.1.4.1.2011.5.25.157.2.325 - hwOpticalAmplifierGainLow
1.3.6.1.4.1.2011.5.25.157.2.326 - hwOpticalAmplifierGainLowResume
1.3.6.1.4.1.2011.5.25.157.2.327 - hwOpticalModuleIsNotAuthorized
1.3.6.1.4.1.2011.5.25.157.2.173 - hwOpticalModuleIsNotAuthorizedResume
1.3.6.1.4.1.2011.5.25.157.2.174 - hwOtuAisAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.3 - hwOtuAisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.4 - hwOtuLomAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.1 - hwOtuLomAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.2 - hwOtuSdAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.5 - hwOtuSdAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.6 - hwOtuSfAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.7 - hwOtuSfAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.8 - hwOutputBroadcastSurgeOccur
1.3.6.1.4.1.2011.5.25.157.2.157.17.3 - hwOutputBroadcastSurgeResume
1.3.6.1.4.1.2011.5.25.157.2.157.17.4 - hwOutputDiscardNotice
1.3.6.1.4.1.2011.5.25.157.2.301 - hwOutputErrorAlarm
1.3.6.1.4.1.2011.5.25.157.2.155 - hwOutputErrorAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.156 - hwOutputRateChangeOverThresholdNotice
1.3.6.1.4.1.2011.5.25.157.2.220 - hwPaisAlarm
1.3.6.1.4.1.2011.5.25.157.2.41 - hwPaisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.42 - hwPhysicalModeInconsistentAlarm
1.3.6.1.4.1.2011.5.25.157.2.309 - hwPhysicalModeInconsistentAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.310 - hwPhysicalPortAutoDetectFail
1.3.6.1.4.1.2011.5.25.157.2.209 - hwPhysicalPortAutoDetectSuccess
1.3.6.1.4.1.2011.5.25.157.2.210 - hwPhysicalPortBip8SdError
1.3.6.1.4.1.2011.5.25.157.2.157.7 - hwPhysicalPortBip8SdErrorResume
1.3.6.1.4.1.2011.5.25.157.2.157.8 - hwPhysicalPortCrcError
1.3.6.1.4.1.2011.5.25.157.2.157.1 - hwPhysicalPortCrcErrorResume
1.3.6.1.4.1.2011.5.25.157.2.157.2 - hwPhysicalPortCrcExc
1.3.6.1.4.1.2011.5.25.157.2.157.13 - hwPhysicalPortCrcExcResume
1.3.6.1.4.1.2011.5.25.157.2.157.14 - hwPhysicalPortCrcPacketErrorRatio
1.3.6.1.4.1.2011.5.25.157.2.157.9 - hwPhysicalPortCrcPacketErrorRatioResume
1.3.6.1.4.1.2011.5.25.157.2.157.10 - hwPhysicalPortCrcPerWarning
1.3.6.1.4.1.2011.5.25.157.2.157.15 - hwPhysicalPortCrcPerWarningResume
1.3.6.1.4.1.2011.5.25.157.2.157.16 - hwPhysicalPortCrcRatioExceed
1.3.6.1.4.1.2011.5.25.157.2.157.21 - hwPhysicalPortCrcRatioResume
1.3.6.1.4.1.2011.5.25.157.2.157.22 - hwPhysicalPortCrcSd
1.3.6.1.4.1.2011.5.25.157.2.157.11 - hwPhysicalPortCrcSdResume
1.3.6.1.4.1.2011.5.25.157.2.157.12 - hwPhysicalPortInBroadcastRapidChange
1.3.6.1.4.1.2011.5.25.157.2.157.20 - hwPhysicalPortSdhError
1.3.6.1.4.1.2011.5.25.157.2.157.5 - hwPhysicalPortSdhErrorResume
1.3.6.1.4.1.2011.5.25.157.2.157.6 - hwPhysicalPortSymbolError
1.3.6.1.4.1.2011.5.25.157.2.157.3 - hwPhysicalPortSymbolErrorResume
1.3.6.1.4.1.2011.5.25.157.2.157.4 - hwPicLcdAlarm
1.3.6.1.4.1.2011.5.25.157.2.245 - hwPicLcdAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.246 - hwPmBdiAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.21 - hwPmBdiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.22 - hwPmTimAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.23 - hwPmTimAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.24 - hwPortACRMasterPWChange
1.3.6.1.4.1.2011.5.25.157.2.1 - hwPortAlarmInverseAutoRecover
1.3.6.1.4.1.2011.5.25.157.2.164 - hwPortCrcRateExceed
1.3.6.1.4.1.2011.5.25.157.2.157.18 - hwPortErrPktSpeedDownGrade
1.3.6.1.4.1.2011.5.25.157.2.331 - hwPortErrPktSpeedDownGradeResume
1.3.6.1.4.1.2011.5.25.157.2.332 - hwPortErrorRateExceed
1.3.6.1.4.1.2011.5.25.157.2.157.19 - hwPortGroupModeInvalid
1.3.6.1.4.1.2011.5.25.157.2.329 - hwPortGroupModeInvalidResume
1.3.6.1.4.1.2011.5.25.157.2.330 - hwPortGroupTransModeDiff
1.3.6.1.4.1.2011.5.25.157.2.242 - hwPortGroupTransModeDiffResume
1.3.6.1.4.1.2011.5.25.157.2.243 - hwPortLRMStateAbnormal
1.3.6.1.4.1.2011.5.25.157.2.292 - hwPortLicenseActFail
1.3.6.1.4.1.2011.5.25.157.2.255 - hwPortLicenseActSuccess
1.3.6.1.4.1.2011.5.25.157.2.256 - hwPortModeChangeTrap
1.3.6.1.4.1.2011.5.25.157.2.232 - hwPortPhysicalRateDegradeAlarm
1.3.6.1.4.1.2011.5.25.157.2.226 - hwPortPhysicalRateDegradeAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.227 - hwPortProtectGroupAvailable
1.3.6.1.4.1.2011.5.25.157.2.249 - hwPortProtectGroupDelete
1.3.6.1.4.1.2011.5.25.157.2.250 - hwPortProtectGroupUnavailable
1.3.6.1.4.1.2011.5.25.157.2.248 - hwPortResourceDeadLine
1.3.6.1.4.1.2011.5.25.157.2.290 - hwPortResourceDeadLineResume
1.3.6.1.4.1.2011.5.25.157.2.291 - hwPortSfpNotSupportSingleFiber
1.3.6.1.4.1.2011.5.25.157.2.319 - hwPortSfpWorkOnlyNonNego
1.3.6.1.4.1.2011.5.25.157.2.328 - hwPortSpeedChangeTrap
1.3.6.1.4.1.2011.5.25.157.2.241 - hwPortTypeChangeTrap
1.3.6.1.4.1.2011.5.25.157.2.284 - hwPplmAlarm
1.3.6.1.4.1.2011.5.25.157.2.39 - hwPplmAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.40 - hwPrdiAlarm
1.3.6.1.4.1.2011.5.25.157.2.35 - hwPrdiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.36 - hwPrefecTcaAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.25 - hwPrefecTcaAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.26 - hwPtimAlarm
1.3.6.1.4.1.2011.5.25.157.2.31 - hwPtimAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.32 - hwPuneqAlarm
1.3.6.1.4.1.2011.5.25.157.2.33 - hwPuneqAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.34 - hwPvcNumAlarm
1.3.6.1.4.1.2011.5.25.157.2.281 - hwPvcNumAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.282 - hwRdiAlarm
1.3.6.1.4.1.2011.5.25.157.2.233 - hwRdiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.234 - hwRemoteFaultAlarm
1.3.6.1.4.1.2011.5.25.157.2.177 - hwRemoteFaultAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.178 - hwRroolAlarm
1.3.6.1.4.1.2011.5.25.157.2.87 - hwRroolAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.88 - hwSdbereAlarm
1.3.6.1.4.1.2011.5.25.157.2.29 - hwSdbereAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.30 - hwSfbereAlarm
1.3.6.1.4.1.2011.5.25.157.2.23 - hwSfbereAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.24 - hwSmBdiAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.9 - hwSmBdiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.10 - hwSmIaeAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.11 - hwSmIaeAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.12 - hwSmTimAlarm
1.3.6.1.4.1.2011.5.25.157.2.212.13 - hwSmTimAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.212.14 - hwSubIfNumExceededSpecAlarm
1.3.6.1.4.1.2011.5.25.157.2.239 - hwSubIfNumExceededSpecAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.240 - hwTrunkUUHashRisk
1.3.6.1.4.1.2011.5.25.157.2.293 - hwTuAisVc12Alarm
1.3.6.1.4.1.2011.5.25.157.2.61 - hwTuAisVc12AlarmResume
1.3.6.1.4.1.2011.5.25.157.2.62 - hwTunnelIfNumExceededSpecAlarm
1.3.6.1.4.1.2011.5.25.157.2.305 - hwUhcsAlarm
1.3.6.1.4.1.2011.5.25.157.2.123 - hwUhcsAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.124 - hwV5VcaisAlarm
1.3.6.1.4.1.2011.5.25.157.2.91 - hwV5VcaisAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.92 - hwVSPortConfigFail
1.3.6.1.4.1.2011.5.25.157.2.288 - hwVSPortConfigFailResume
1.3.6.1.4.1.2011.5.25.157.2.289 - hwVlopAlarm
1.3.6.1.4.1.2011.5.25.157.2.45 - hwVlopAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.46 - hwVrdiAlarm
1.3.6.1.4.1.2011.5.25.157.2.53 - hwVrdiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.54 - hwVrfiAlarm
1.3.6.1.4.1.2011.5.25.157.2.89 - hwVrfiAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.90 - hwVxlanTrunkHashNotSupport
1.3.6.1.4.1.2011.5.25.157.2.280 - hwX50AbitAlarm
1.3.6.1.4.1.2011.5.25.157.2.221.3 - hwX50AbitAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.221.4 - hwX50LofAlarm
1.3.6.1.4.1.2011.5.25.157.2.221.1 - hwX50LofAlarmResume
1.3.6.1.4.1.2011.5.25.157.2.221.2
Groups and compliance
- hwBundleSerialObjectGroup
- hwCposObjectGroup
- hwDs0ChannelBundleObjectGroup
- hwDs1ObjectGroup
- hwDs3ObjectGroup
- hwDslGroupImaObjectGroup
- hwDslGroupObjectGroup
- hwDslImaTrapGroup
- hwDslLinkObjectGroup
- hwDslLinkTrapGroup
- hwEthernetObjectGroup
- hwIFMPortBurstObjectGroup
- hwLinkHeartbeatObjectGroup
- hwLogicalPortObjectGroup
- hwOtnAlarmNotificationsGroup
- hwPortAlarmDownEnableObjectGroup
- hwPortAlarmThresholdObjectGroup
- hwPortAlarmTrapGroup
- hwPortCompliance
- hwPortDescriptinonObjectGroup
- hwPortNotificationsGroup
- hwPortPhysicalObjectGroup
- hwPortProtectObjectGroup
- hwPortSpeedTrapObjectsGroup
- hwPortTotalStatObjectGroup
- hwPosObjectGroup